ryan/mozjpeg
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Compare commits

base: ryan:1.2.90
Branches Tags
ryan:master ryan:v4.x
ryan:v4.1.5 ryan:v4.1.4 ryan:v4.1.3 ryan:v4.1.1 ryan:2.1.4 ryan:v4.0.3 ryan:v4.0.2 ryan:v4.0.0 ryan:v4.0.1-rc2 ryan:v4.0.1-rc ryan:jpeg-9d ryan:2.0.3 ryan:1.5.90 ryan:jpeg-9c ryan:1.5.3 ryan:v3.3.1 ryan:1.5.2 ryan:v3.2 ryan:v3.2-pre ryan:1.5.1 ryan:1.5.0 ryan:jpeg-9b ryan:1.4.1 ryan:v3.1 ryan:1.4.0 ryan:v3.0 ryan:v3.0-pre ryan:1.3.90 ryan:v2.1 ryan:v2.0.1 ryan:v2.0 ryan:v1.0.1 ryan:1.3.1 ryan:v1.0 ryan:jpeg-9a ryan:1.3.0 ryan:1.2.90 ryan:jpeg-9 ryan:1.2.1 ryan:1.2.0 ryan:jpeg-8d ryan:1.1.90 ryan:1.1.1 ryan:1.1.0 ryan:jpeg-8c ryan:1.0.90 ryan:1.0.1 ryan:1.0.0 ryan:jpeg-8b ryan:0.0.93 ryan:0.0.91 ryan:jpeg-8a ryan:0.0.90 ryan:jpeg-8 ryan:jpeg-7 ryan:jpeg-6bx ryan:jpeg-ari ryan:jpeg-6b ryan:jpeg-6a ryan:jpeg-6 ryan:jpeg-5b ryan:jpeg-5a ryan:jpeg-5 ryan:jpeg-4a ryan:jpeg-4 ryan:jpeg-3 ryan:jpeg-2 ryan:jpeg-1
...
compare: ryan:1.5.1
Branches Tags
ryan:master ryan:v4.x
ryan:v4.1.5 ryan:v4.1.4 ryan:v4.1.3 ryan:v4.1.1 ryan:2.1.4 ryan:v4.0.3 ryan:v4.0.2 ryan:v4.0.0 ryan:v4.0.1-rc2 ryan:v4.0.1-rc ryan:jpeg-9d ryan:2.0.3 ryan:1.5.90 ryan:jpeg-9c ryan:1.5.3 ryan:v3.3.1 ryan:1.5.2 ryan:v3.2 ryan:v3.2-pre ryan:1.5.1 ryan:1.5.0 ryan:jpeg-9b ryan:1.4.1 ryan:v3.1 ryan:1.4.0 ryan:v3.0 ryan:v3.0-pre ryan:1.3.90 ryan:v2.1 ryan:v2.0.1 ryan:v2.0 ryan:v1.0.1 ryan:1.3.1 ryan:v1.0 ryan:jpeg-9a ryan:1.3.0 ryan:1.2.90 ryan:jpeg-9 ryan:1.2.1 ryan:1.2.0 ryan:jpeg-8d ryan:1.1.90 ryan:1.1.1 ryan:1.1.0 ryan:jpeg-8c ryan:1.0.90 ryan:1.0.1 ryan:1.0.0 ryan:jpeg-8b ryan:0.0.93 ryan:0.0.91 ryan:jpeg-8a ryan:0.0.90 ryan:jpeg-8 ryan:jpeg-7 ryan:jpeg-6bx ryan:jpeg-ari ryan:jpeg-6b ryan:jpeg-6a ryan:jpeg-6 ryan:jpeg-5b ryan:jpeg-5a ryan:jpeg-5 ryan:jpeg-4a ryan:jpeg-4 ryan:jpeg-3 ryan:jpeg-2 ryan:jpeg-1

717 Commits
1.2.90 ... 1.5.1

Author SHA1 Message Date
mayeut
cb88e5da80 ARM64 NEON: Fix another ABI conformance issue 
Based on
98a5a9dc89
with wordsmithing by DRC.

In the AArch64 ABI, as in many others, it's forbidden to read/store data
below the stack pointer.  Some SIMD functions were doing just that
(stack pointer misuse) when trying to preserve callee-saved registers,
and this resulted in those registers being restored with incorrect
contents under certain circumstances.

This patch fixes that behavior, and callee-saved registers are now
stored above the stack pointer throughout the function call.  The patch
also removes register saving in places where it is unnecessary for this
ABI, or it makes use of unused scratch regiters instead of callee-saved
registers.

Fixes #97.  Closes #101.

Refer also to https://bugzilla.redhat.com/show_bug.cgi?id=1368569
 2016-09-20 17:38:39 -05:00
DRC
e9d9c31fd2 Build: Remove ARMv6 support from 'make iosdmg' 
The last iDevice to require ARMv6 was the iPhone 3G, which required iOS
4.2.1 or older.  Our binaries have always required iOS 4.3 or newer,
so I'm not sure if the ARMv6 fork of our binaries was ever useful to
begin with.  In any case, if it ever was useful, it no longer is.  Fat
binaries can still be generated with ARMv6 support by invoking
{build_directory}/pkgscripts/makemacpkg manually.
 2016-09-20 11:29:22 -05:00
DRC
077e5bb4e0 Fix out-of-bounds write in partial decomp. feature 
Reported by Clang UBSan (refer to
https://bugzilla.mozilla.org/show_bug.cgi?id=1301252 for test image.)
This appears to be a legitimate bug introduced by
3ab68cf563.  Any component array, such
as first_MCU_col and last_MCU_col, should always be able to accommodate
MAX_COMPONENTS values.  The aforementioned test image had 8 components,
which was not enough to make the out-of-bounds write bust out of the
jpeg_decomp_master struct (and fortunately the memory after last_MCU_col
is an integer used as a boolean, so stomping on it will do nothing other
than change the decoder state.)  I crafted another special image that
has 10 components (the maximum allowable), but that was apparently not
enough to bust out of the allocated memory, either.  Thus, it is
posited that the security threat posed by this bug is either extremely
minimal or non-existent.
 2016-09-08 22:01:09 -05:00
DRC
a1dd35680d Silence additional UBSan warnings 
NOTE: The jdhuff.c/jdphuff.c warnings should have already been silenced
by 8e9cef2e6f, but apparently I need to
be REALLY clear that I'm trying to do pointer arithmetic rather than
dereference an array.  Grrr...

Refer to:
https://bugzilla.mozilla.org/show_bug.cgi?id=1301250
https://bugzilla.mozilla.org/show_bug.cgi?id=1301256
 2016-09-08 21:29:58 -05:00
DRC
a09ba29a55 Fix unsigned int overflow in libjpeg memory mgr. 
When attempting to decode a malformed JPEG image (refer to
https://bugzilla.mozilla.org/show_bug.cgi?id=1295044) with dimensions
61472 x 32800, the maximum_space variable within the
realize_virt_arrays() function will exceed the maximum value of a 32-bit
integer and will wrap around.  The memory manager subsequently fails
with an "Insufficient memory" error (case 4, in alloc_large()), so this
commit simply causes that error to be triggered earlier, before UBSan
has a chance to complain.

Note that this issue did not ever represent an exploitable security
threat, because the POSIX-based memory manager that we use doesn't ever
do anything meaningful with the value of maximum_space.
jpeg_mem_available() simply sets avail_mem = maximum_space, so the
subsequent behavior of the memory manager is the same regardless of
whether maximum_space is correct or not.  This commit simply removes a
UBSan warning in order to make it easier to detect actual security
issues.
 2016-09-08 16:17:05 -05:00
DRC
8ce2c9119a TurboJPEG: Decomp. 4:2:2/4:4:0 JPEGs w/unusual SFs 
Normally, 4:2:2 JPEGs have horizontal x vertical luminance,chrominance
sampling factors of 2x1,1x1, and 4:4:0 JPEGs have horizontal x vertical
luminance,chrominance sampling factors of 1x2,1x1.  However, it is
technically legal to create 4:2:2 JPEGs with sampling factors of
2x2,1x2 and 4:4:0 JPEGs with sampling factors of 2x2,2x1, since the
sums of the products of those sampling factors (2x2 + 1x2 + 1x2 and
2x2 + 2x1 + 2x1) are still <= 10.  The libjpeg API correctly decodes
such images, so the TurboJPEG API should as well.

Fixes #92
 2016-08-01 11:59:31 -05:00
DRC
db04435165 Silence pedantic GCC6 code formatting warnings 
Apparently it's "misleading" to put two self-contained if statements
on a single line.  Who knew?
 2016-07-14 13:36:47 -05:00
DRC
7723d7f7d0 Use plain upsampling if merged isn't accelerated 
Currently, this only affects ARM, since it is the only platform that
accelerates YCbCr-to-RGB conversion but not merged upsampling.  Even if
"plain" upsampling isn't accelerated, the combination of accelerated
color conversion + unaccelerated plain upsampling is still faster than
the unaccelerated merged upsampling algorithms.

Closes #81
 2016-07-13 22:06:11 -05:00
Kornel Lesiński
628c168c86 Implement h1v2 fancy upsampling 
This allows fancy upsampling to be used when decompressing 4:2:2 images
that have been losslessly rotated or transposed.

(docs and comments added by DRC)

Based on f63aca945d

Closes #89
 2016-07-13 17:28:19 -05:00
DRC
1120ff29a1 Fix AArch64 ABI conformance issue in SIMD code 
In the AArch64 ABI, the high (unused) DWORD of a 32-bit argument's
register is undefined, so it was incorrect to use 64-bit
instructions to transfer a JDIMENSION argument in the 64-bit NEON SIMD
functions.  The code worked thus far only because the existing compiler
optimizers weren't smart enough to do anything else with the register in
question, so the upper 32 bits happened to be all zeroes.

The latest builds of Clang/LLVM have a smarter optimizer, and under
certain circumstances, it will attempt to load-combine adjacent 32-bit
integers from one of the libjpeg structures into a single 64-bit integer
and pass that 64-bit integer as a 32-bit argument to one of the SIMD
functions (which is allowed by the ABI, since the upper 32 bits of the
32-bit argument's register are undefined.)  This caused the
libjpeg-turbo regression tests to crash.

This patch tries to use the Wn registers whenever possible.  Otherwise,
it uses a zero-extend instruction to avoid using the upper 32 bits of
the 64-bit registers, which are not guaranteed to be valid for 32-bit
arguments.

Based on 1fbae13021

Closes #91.  Refer also to android-ndk/ndk#110 and
https://llvm.org/bugs/show_bug.cgi?id=28393
 2016-07-13 14:36:19 -05:00
DRC
1945ad961b Don't install libturbojpeg.pc if TJPEG disabled 2016-07-12 22:21:20 -05:00
DRC
6e9d43e085 Linux/PPC: Only enable AltiVec if CPU supports it 
This eliminates "illegal instruction" errors when running libjpeg-turbo
under Linux on PowerPC chips that lack AltiVec support (e.g. the old
7XX/G3 models but also the newer e5500 series.)
 2016-07-07 19:02:44 +00:00
DRC
9055fb408d ARM/MIPS: Change the behavior of JSIMD_FORCE* 
The JSIMD_FORCE* environment variables previously meant "force the use
of this instruction set if it is available but others are available as
well", but that did nothing on ARM platforms, since there is only ever
one instruction set available.  Since the ARM and MIPS CPU feature
detection code is less than bulletproof, and since there is only one
SIMD instruction set (currently) supported on those platforms, it makes
sense for the JSIMD_FORCE* environment variables on those platforms to
actually force the use of the SIMD instruction set, thus bypassing the
CPU feature detection code.

This addresses a concern raised in #88 whereby parsing /proc/cpuinfo
didn't work within a QEMU environment.  This at least provides a
workaround, allowing users to force-enable or force-disable SIMD
instructions for ARM and MIPS builds of libjpeg-turbo.
 2016-07-07 13:38:48 -05:00
DRC
9e6c6a14f8 Bump version to 1.5.1 to prepare for new commits 2016-07-06 16:22:27 +00:00
DRC
3ff13e651b 1.5.0 2016-05-31 22:53:17 -05:00
DRC
1d50a8cd08 BUILDING.md: More NASM/YASM clarifications 
28d1a1300c introduced the line
"nasm.exe should be in your PATH".  This commit corrects an oversight in
8f1c0a681c /
e5091f2cf3 whereby this line should have
been extended to include yasm.exe.
 2016-05-31 22:48:52 -05:00
DRC
123f7258a8 Format copyright headers more consistently 
The IJG convention is to format copyright notices as:

Copyright (C) YYYY, Owner.

We try to maintain this convention for any code that is part of the
libjpeg API library (with the exception of preserving the copyright
notices from Cendio's code verbatim, since those predate
libjpeg-turbo.)

Note that the phrase "All Rights Reserved" is no longer necessary, since
all Buenos Aires Convention signatories signed onto the Berne Convention
in 2000.  However, our convention is to retain this phrase for any files
that have a self-contained copyright header but to leave it off of any
files that refer to another file for conditions of distribution and use.
For instance, all of the non-SIMD files in the libjpeg API library refer
to README.ijg, and the copyright message in that file contains "All
Rights Reserved", so it is unnecessary to add it to the individual
files.

The TurboJPEG code retains my preferred formatting convention for
copyright notices, which is based on that of VirtualGL (where the
TurboJPEG API originated.)
 2016-05-28 19:16:58 -05:00
DRC
e5091f2cf3 Merge branch '1.4.x' 2016-05-28 18:19:58 -05:00
DRC
8f1c0a681c BUILDING.txt: Clarify NASM build requirements 
The version requirements only apply to NASM (not YASM.)  Also, 2.11.09
was never actually released (the first release containing the OS X fix
is 2.12.)
 2016-05-28 18:16:24 -05:00
DRC
68cf83db56 Don't allow opaque source/dest mgrs to be swapped 
Calling jpeg_stdio_dest() followed by jpeg_mem_dest(), or jpeg_mem_src()
followed by jpeg_stdio_src(), is dangerous, because the existing opaque
structure would not be big enough to accommodate the new source/dest
manager.  This issue was non-obvious to libjpeg-turbo consumers, since
it was only documented in code comments.  Furthermore, the issue could
also occur if the source/dest manager was allocated by the calling
program, but it was not allocated with enough space to accommodate the
opaque stdio or memory source/dest manager structs.  The safest thing to
do is to throw an error if one of these functions is called when there
is already a source/dest manager assigned to the object and it was
allocated elsewhere.

Closes #78, #79
 2016-05-10 21:30:15 -05:00
DRC
f06cc1200f Build: Add integer version macro to jconfig.h 
This makes it significantly easier to do conditional compilation based
on the libjpeg-turbo version.

Based on:
e6d5b3e50b
1394a89ba6

Closes #80
 2016-05-10 19:36:52 -05:00
DRC
5c064de10d Build: Don't allow jpeg-7+ emul. w/o arith coding 
The jpeg-7/jpeg-8 APIs/ABIs require arithmetic coding, and the jpeg-8
API/ABI requires the memory source/destination manager, so this commit
causes the build system to ignore --with-arith-enc/--without-arith-enc
and --with-arith-dec/--without-arith-dec (and the equivalent CMake
variables-- WITH_ARITH_ENC and WITH_ARITH_DEC) when v7/v8 API/ABI
emulation is enabled.  Furthermore, the CMake build system now ignores
WITH_MEM_SRCDST whenever WITH_JPEG8 is specified (the autotools build
system already did that.)
 2016-05-09 20:00:46 -05:00
mattsarett
2e480fa2a3 ARMv7 SIMD: Fix clang compatibility (Part 2) 
GCC does support UAL syntax (strbeq) if the ".syntax unified" directive
is supplied.  This directive is supported by all versions of GCC and
clang going back to 2003, so it should not create any backward
compatibility issues.

Based on 1264349e2f

Closes #76
 2016-05-03 13:08:58 -05:00
mattsarett
5e576386b5 ARMv7 SIMD: Fix clang compatibility 
By design, clang only supports Unified Assembler Language (and not
pre-UAL syntax):
https://llvm.org/bugs/show_bug.cgi?id=23507
http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0473c/BABJIHGJ.html

Thus, clang only supports the strbeq instruction and not streqb, but
unfortunately some versions of GCC only support streqb.  Go, go
Gadget #ifdef...

Based on https://github.com/mattsarett/libjpeg-turbo/commit/a82e63aac63f8fa3
95fa4caad4de6859623ee2e2

Closes #75
 2016-05-02 12:20:10 -05:00
DRC
0d61e80ab0 Merge branch '1.4.x' 2016-05-01 12:07:05 -05:00
DRC
ee681aa304 Fix CMake fallback BUILD var on non-U.S. machines 
If wmic.exe wasn't available, then CMakeLists.txt would call
"cmd /C date /T" and parse the result in order to set the BUILD
variable.  However, the parser assumed that the date was in MM/DD/YYYY
format, which is not generally the case unless the user's locale is U.S.
English with the default region/language settings for that locale.

This commit modifies CMakeLists.txt such that it uses the
string(TIMESTAMP) function available in CMake 2.8.11 and later to set
the BUILD variable, thus eliminating the need to use wmic.exe or any
other platform-specific hack.

This commit also modifies the build instructions to remove any reference
to CMake 2.6 (which hasn't been supported by our build system since
libjpeg-turbo 1.3.x.)

Closes #74
 2016-05-01 12:02:16 -05:00
DRC
346837cad3 Merge branch '1.4.x' 2016-04-25 19:08:47 -05:00
DRC
eb7962a02b CMakeLists.txt: Clarify that Un*x isn't supported 
At one time, it was possible to use CMake to build under Cygwin, but
that hasn't worked since 1.4.1 (due to the Huffman codec changes that
now require SIZEOF_SIZE_T to be defined for non-WIN32 platforms) and may
have even been broken before that.  Originally, we used the "date"
command under MSYS in order to obtain the default build number, but that
was rendered unnecessary by 5e3bb3e9 (v1.3 beta.)  9fe22dac (1.4 beta)
further modified CMakeLists.txt so that the "date" command was only used
on Cygwin, but for unexplained reasons, that commit also applied the
(now vestigial) code to all non-WIN32 platforms.  This prevented
CMakeLists.txt from displaying an error if someone attempted to use the
CMake build system on Un*x platforms, and that may have been behind the
flurry of pull requests and issues-- including #21, #29, #37, #58, #73--
complaining that the CMake build system didn't work on Un*x platforms
(although it was not until #73 that this bug came to light.)

This commit removes all vestiges of Un*x support from the CMake build
system and makes it clear that CMake cannot be used to build
libjpeg-turbo on non-WIN32 platforms.  It is our position that CMake
will not be supported on non-WIN32 platforms until/unless the autotools
build system is removed, and this will not happen without broad support
from the community (including major O/S vendors.)  If you are in favor
of migrating the entire build system to CMake, then please make your
voice heard by commenting on #56.
 2016-04-25 19:06:16 -05:00
DRC
3c67d4f7c0 Catch libjpeg errors in tjDecompressToYUV2() 
Even though tjDecompressToYUV2() is mostly just a wrapper for
tjDecompressToYUVPlanes(), tjDecompressToYUV2() still calls
jpeg_read_header(), so it needs to properly set up the libjpeg error
handler prior to making this call.  Otherwise, under very esoteric (and
arguably incorrect) use cases, a program could call tjDecompressToYUV2()
without first checking the JPEG header using tjDecompressHeader3(), and
if the header was corrupt, then the libjpeg API would invoke
my_error_exit().  my_error_exit() would in turn call longjmp() on the
previous value of myerr->setjmp_buffer, which was probably set in a
previous TurboJPEG function, such as tjInitDecompress().  Thus, when a
libjpeg error was triggered within the body of tjDecompressToYUV2(), the
PC would jump to the error handler of the previous TurboJPEG function,
and this usually caused stack corruption in the calling program (because
the signature and return type of the previous TurboJPEG function
probably wasn't the same as that of tjDecompressToYUV2().)
 2016-04-25 17:57:59 -05:00
DRC
1959e28b49 Increase severity of tjDecompressToYUV2() bug desc 
Actually, what happened was that the longjmp() call within
my_error_exit() acted on the previous value of myerr->setjmp_buffer,
which was probably set in a previous TurboJPEG function, such as
tjInitDecompress().  Thus, when a libjpeg error was triggered within
the body of tjDecompressToYUV2(), the PC jumped to the error handler
of the previous TurboJPEG function, and this usually caused stack
corruption in the calling program (because the signature and return
type of the previous TurboJPEG function probably wasn't the same.)
 2016-04-21 10:28:19 -05:00
DRC
dec79952d6 Catch libjpeg errors in tjDecompressToYUV2() 
Even though tjDecompressToYUV2() is mostly just a wrapper for
tjDecompressToYUVPlanes(), tjDecompressToYUV2() still calls
jpeg_read_header(), so it needs to properly set up the libjpeg error
handler prior to making this call.  Otherwise, under very esoteric (and
arguably incorrect) use cases, a program can call tjDecompressToYUV2()
without first checking the JPEG header using tjDecompressHeader3(), and
if the header is corrupt, tjDecompressToYUV2() will abort without
triggering an error.

Fixes #72
 2016-04-20 11:39:51 -05:00
DRC
2628c562bc BUILDING.md: Fix "... OR ..." indentation again 
<sigh> GitHub doesn't render indented text the same as my local MarkDown
viewer (MacDown), so it's necessary to indent "... OR ..." by 3 spaces
so both will display it on the same indentation level as "Visual C++
2005 or later" and "MinGW".
 2016-04-14 14:19:19 -05:00
DRC
28d1a1300c BUILDING.md: Fix confusing Windows build reqs 
Indent "... OR ..." to make it clear that the choice is between Visual
C++ and MinGW, not Visual C++ and MinGW + NASM.  Move NASM to the top of
the list to make that even more clear.  Make it clear that nasm.exe
should be in the PATH.

Addresses concerns raised in #70
 2016-04-14 14:15:30 -05:00
DRC
1a3aebd88e Merge branch '1.4.x' 2016-03-31 10:02:44 -05:00
DRC
1e81b0c3ea cjpeg: Fix buf overrun caused by bad bin PPM input 
This extends the fix in 6709e4a0cf to
include binary PPM/PGM files, thus preventing a malformed binary
PPM/PGM input file from triggering an overrun of the rescale array and
potentially crashing cjpeg.

Note that this issue affected only cjpeg and not the underlying
libjpeg-turbo libraries, and thus it did not represent a security
threat.

Thanks to @hughdavenport for the discovery.
 2016-03-31 09:54:14 -05:00
DRC
b2817f5251 Merge branch '1.4.x' 2016-03-16 07:18:30 -05:00
DRC
6f241d4d42 Add version/build info to global string table 
This is a common practice in other infrastructure libraries, such as
OpenSSL and libpng, because it makes it easy to examine an application
binary and determine which version of the library the application was
linked against.

Closes #66
 2016-03-16 07:14:19 -05:00
DRC
1385f8b281 ChangeLog.md: Improve readability of plain text 2016-03-14 13:32:00 -05:00
DRC
742fb37dde change.log: Refer users to ChangeLog.md 
change.log is included only to document the changes that we have merged
from libjpeg.
 2016-03-13 18:28:14 -05:00
DRC
a839a7a964 Markdown version of ChangeLog.txt 
This will make it easier to crib ChangeLog information into release
notes, since both SourceForge and GitHub support MD.
 2016-03-13 18:21:56 -05:00
DRC
3f56bd597c Rename ChangeLog.txt 
... in preparation for creating a MarkDown version (Git will not
preserve history unless you rename the file prior to modifying it.)
 2016-03-13 18:21:21 -05:00
DRC
e5f280c4c4 README.md: Link to BUILDING.md 
Addresses a concern expressed in #56 and #58.
 2016-03-11 11:14:28 -06:00
DRC
4f58123130 BUILDING.md and README.md: Cosmetic tweaks 2016-03-09 17:26:47 -06:00
DRC
622d6678a8 ChangeLog: "1.5 beta1" --> "1.4.90 (1.5 beta1)" 
(for consistency with other beta release headings)
 2016-03-06 08:34:48 -06:00
DRC
b3247c7d71 Merge branch '1.4.x' 2016-03-06 08:34:00 -06:00
DRC
a572622dd6 Ensure that default Huffman tables are initialized 
This prevents a malformed motion-JPEG frame (MJPEG frames lack Huffman
tables) from causing the "fast path" of the Huffman decoder to read
uninitialized memory.  Essentially, this is doing the same thing for
MJPEG frames as 43d8cf4d45 did for regular
images.
 2016-03-06 08:29:44 -06:00
DRC
7cb8de4ae0 Java: Fix parallel make with autotools 
Running 'make -j{jobs}' on a build that was configured with Java
(--with-java) would previously cause an error:

    make: *** No rule to make target `TJExample.class', needed by
        `turbojpeg.jar'.

It seems that parallel make doesn't understand that the files in
$(JAVA_CLASSES) are all generated from the same invocation of javac, so
it tries to parallelize the building of those files (which of course
doesn't work.)  This patch instead makes turbojpeg.jar depend on
classnoinst.stamp.  This effectively creates a synchronization fence,
since that file is only created when all of the class files have been
built.

Fixes #62
 2016-03-02 09:59:50 -06:00
DRC
056536f660 Win/x64: Fix improper callee save of xmm8-xmm11 
The x86-64 SIMD accelerations for Huffman encoding used incorrect
stack math to save xmm8-xmm11 on Windows.  This caused TJBench to
always report 1 Mpixel/sec for the compression performance, and it
likely would have caused other application issues as well.
 2016-02-29 17:46:34 -06:00
DRC
7c202f76e7 Bump TurboJPEG C API revision to 1.5 
The changes relative to 1.4.x are only cosmetic (using const pointers)
and should not affect API/ABI compatibility, but our practice is to
synchronize the API revision with the most recent release that provides
user-visible changes to the API.
 2016-02-29 13:21:12 -06:00
DRC
fa722636be ChangeLog: Mention jpeg_crop_scanline() function 2016-02-29 12:06:56 -06:00
DRC
2354810a43 1.5 beta1 2016-02-29 11:54:42 -06:00
DRC
45c1e3a887 Merge branch '1.4.x' 2016-02-25 17:15:44 -06:00
mayeut
f57bae0ddd Fix memory leak when running tjunittest -yuv 
Closes #61
 2016-02-25 17:14:56 -06:00
DRC
025c1f66de Fix v7/v8-compatible build 
Broken by 3ab68cf563

Fixes #60
 2016-02-22 10:01:16 -06:00
DRC
3ab68cf563 libjpeg API: Partial scanline decompression 
This, in combination with the existing jpeg_skip_scanlines() function,
provides the ability to crop the image both horizontally and vertically
while decompressing (certain restrictions apply-- see libjpeg.txt.)

This also cleans up the documentation of the line skipping feature and
removes the "strip decompression" feature from djpeg, since the new
cropping feature is a superset of it.

Refer to #34 for discussion.

Closes #34
 2016-02-19 21:07:39 -06:00
DRC
5f972324ee Build: Make the NASM autoconf variable persistent 
Previously, if a custom value of this variable was specified when
running configure, then that value would be lost if configure was
automatically re-run (as a result of changes to configure.ac, for
instance.)

As a bonus, the NASM variable is now also listed when running
'configure --help', so it is obvious how to override the default
NASM command.
 2016-02-19 13:16:56 -06:00
DRC
f76c01d0bd Use consistent/modern code formatting for dbl ptrs 2016-02-19 10:56:13 -06:00
DRC
d4be42360c usage.txt: Restore accidentally deleted phrase 
It somehow got lost when merging the jpeg-9+ documentation changes.
 2016-02-19 10:35:41 -06:00
DRC
e621dfc508 More minor code formatting tweaks 2016-02-19 10:35:09 -06:00
DRC
9100b67a75 Clean up a couple of copyright messages 2016-02-19 09:25:44 -06:00
DRC
bd49803f92 Use consistent/modern code formatting for pointers 
The convention used by libjpeg:

    type * variable;

is not very common anymore, because it looks too much like
multiplication.  Some (particularly C++ programmers) prefer to tuck the
pointer symbol against the type:

    type* variable;

to emphasize that a pointer to a type is effectively a new type.
However, this can also be confusing, since defining multiple variables
on the same line would not work properly:

    type* variable1, variable2;  /* Only variable1 is actually a
                                    pointer. */

This commit reformats the entirety of the libjpeg-turbo code base so
that it uses the same code formatting convention for pointers that the
TurboJPEG API code uses:

    type *variable1, *variable2;

This seems to be the most common convention among C programmers, and
it is the convention used by other codec libraries, such as libpng and
libtiff.
 2016-02-19 09:10:07 -06:00
DRC
ae41128845 Reorder copyright messages in cjpeg/djpeg/jpegtran 
Place the authors in the following order:
* libjpeg-turbo authors (2009-) in descending order of the date of their
  most recent contribution to the project, then in ascending order of
  the date of their first contribution to the project
* Upstream authors in descending order of the date of the first
  inclusion of their code (this indicates that their code serves as the
  foundation of this code.)

This also adds Siarhei to the author list, since he contributed ARM SIMD
code both as a Nokia employee and more recently as an independent
developer.
 2016-02-18 16:33:23 -06:00
DRC
54e6b8e806 Include some comments/doc tweaks from jpeg-9+ 2016-02-18 15:16:17 -06:00
DRC
83aeb7b28c Wordsmith GIF limitations in cjpeg.1/djpeg.1 2016-02-17 20:05:44 -06:00
Guido Vollbeding
a560e4b423 The Independent JPEG Group's JPEG software v9b 2016-02-16 12:27:41 -06:00
Guido Vollbeding
fc11193e7a The Independent JPEG Group's JPEG software v9a 2016-02-16 12:26:00 -06:00
Guido Vollbeding
e7f88aec23 The Independent JPEG Group's JPEG software v9 2016-02-16 12:22:55 -06:00
DRC
aefd8b7942 Clean up pkgconfig dir when removing RPM & Mac pkg 2016-02-14 17:20:30 -06:00
DRC
18dcac4632 Fix compiler warning 2016-02-14 09:01:07 -06:00
DRC
03841e6e89 Win: Display effective C/LD flags in CMake output 2016-02-09 18:30:59 -06:00
DRC
d123c125c5 Java: Avoid OOM error when running 'make test' 
We need to garbage collect between iterations of the outside loop in
bufSizeTest() in order to avoid exhausting the heap when running with
Java 6 (which is still used on Linux to test the 32-bit version of
libjpeg-turbo in automated builds.)
 2016-02-09 01:35:39 -06:00
DRC
8632f1b262 ARM64: Avoid tbl instruction on Cortex-A53/A57 
Full-color compression speedups relative to previous commits:
Cortex-A53 (Nexus 5X), Android, 64-bit: 0.91-3.0% (avg. 1.8%)
Cortex-A57 (Nexus 5X), Android, 64-bit: -0.35-1.5% (avg. 0.65%)
 2016-02-09 00:38:58 -06:00
DRC
bba7978981 ChangeLog: Mention ARM64 Huffman & adj perf claims 2016-02-08 16:10:28 -06:00
DRC
28f00bf235 Fix iOS/ARMv8 build 
Broken by 46ecffa324.

gas-preprocessor.pl and/or the clang assembler apparently don't like
default values in macro arguments, and we need to use a separate const
section for each function (because of our use of adr, also necessitated
by the broken clang assembler.)
 2016-02-08 15:15:11 -06:00
DRC
ab80273b61 BUILDING.md: Update OS X Java information 
The Apple Java Developer Package is only necessary on OS X < 10.7.
When building on Lion and later, the Oracle JDK is preferred.
 2016-02-08 14:41:07 -06:00
DRC
53c635b8e8 Fix 'make dist'; Include LICENSE.md in packages 2016-02-08 14:03:13 -06:00
DRC
46ecffa324 ARM64: Avoid LD3/ST3 at run time, not compile time 
... and only if ThunderX is detected.  This can be easily expanded later
on to include other CPUs that are known to suffer from slow LD3/ST3, but
it doesn't make sense to disable LD3/ST3 for all non-Android Linux
platforms just because ThunderX is slow.
 2016-02-07 22:05:56 -06:00
DRC
219470d6ac ARM64 NEON SIMD implementation of Huffman encoding 
Full-color compression speedups relative to previous commits:
Cortex-A53 (Nexus 5X), Android, 64-bit: 1.1-13% (avg. 6.0%)
Cortex-A57 (Nexus 5X), Android, 64-bit: 0.0-22% (avg. 6.3%)

Refer to #47 and #50 for discussion

Closes #50

Note that this commit introduces a similar /proc/cpuinfo parser to that
of the ARM32 implementation.  It is used to specifically check whether
the code is running on Cavium ThunderX and, if so, disable the ARM64
SIMD Huffman routines (which slow performance by an average of 8% on
that CPU.)

Based on:
a8c282e5e5
 2016-02-07 21:51:11 -06:00
DRC
15aaa7f7e2 ARM SIMD: Comment tweaks 2016-02-07 17:39:33 -06:00
DRC
45bbe06ec5 Un*x: Enable testing cross-compiled builds 
Don't include the all: target as a dependency of the tests when
cross-compiling, and ensure that the files generated by the tests are
removed, even if they were created read-only (or if the tests are being
run on a different type of system that doesn't correctly interpret the
file permissions.)  This allows one to easily build the code on one
machine and run 'make test' on another.
 2016-02-06 18:40:52 -06:00
DRC
2d62325754 Fix Visual C++ compiler warnings 
Somehow this got reverted with aa769febf2.
Oops.
 2016-02-06 18:40:52 -06:00
DRC
f9134384b7 Win: Enable testing cross-compiled builds 
When cross-compiling, CMakeLists.txt now generates the CTest script
using relative paths, so that CTest can more easily be executed on a
different machine from the build machine.  Furthermore, Windows builds
are now tested using md5cmp, just like on Linux, rather than a CMake
script.  This prevents issues with differing CMake locations between
the build and test machines.

This also removes some trailing spaces from the md5cmp code and improves
the readability of the test code in CMakeLists.txt.
 2016-02-06 18:40:19 -06:00
DRC
ce0dd949b2 Fix MinGW build 
jinclude.h can't be safely included multiple times, so instead of
including it in the shared (broken-out) headers, it should instead be
included by the source files that include one or more of those headers.
 2016-02-06 12:18:44 -06:00
DRC
8ff67fdb24 Update MinGW Linux build recipe 2016-02-06 12:17:40 -06:00
DRC
55a18d4007 Merge branch '1.4.x' 2016-02-04 18:52:23 -06:00
DRC
2d56acb840 Merge branch '1.3.x' into 1.4.x 2016-02-04 18:48:22 -06:00
DRC
c454c595dc Merge branch '1.2.x' into 1.3.x 2016-02-04 18:46:13 -06:00
DRC
0463f7c9aa Prevent overread when decoding malformed JPEG 
The accelerated Huffman decoder was previously invoked if there were
> 128 bytes in the input buffer.  However, it is possible to construct a
JPEG image with Huffman blocks > 430 bytes in length
(http://stackoverflow.com/questions/2734678/jpeg-calculating-max-size).
While such images are pathological and could never be created by a
JPEG compressor, it is conceivable that an attacker could use such an
artifially-constructed image to trigger an input buffer overrun in the
libjpeg-turbo decompressor and thus gain access to some of the data on
the calling program's heap.

This patch simply increases the minimum buffer size for the accelerated
Huffman decoder to 512 bytes, which should (hopefully) accommodate any
possible input.

This addresses a major issue (LJT-01-005) identified in a security audit
by Cure53.
 2016-02-04 18:43:48 -06:00
DRC
04dd34c14e Guard against wrap-around in alloc functions 
Because of the exposed nature of the libjpeg API, alloc_small() and
alloc_large() can potentially be called by external code.  If an
application were to call either of those functions with
sizeofobject > SIZE_MAX - ALIGN_SIZE - 1, then the math in
round_up_pow2() would wrap around to zero, causing that function to
return a small value.  That value would likely not exceed
MAX_ALLOC_CHUNK, so the subsequent size checks in alloc_small() and
alloc_large() would not catch the error.

A similar problem could occur in 32-bit builds if alloc_sarray() were
called with
samplesperrow > SIZE_MAX - (2 * ALIGN_SIZE / sizeof(JSAMPLE)) - 1

This patch simply ensures that the size argument to the alloc_*()
functions will never exceed MAX_ALLOC_CHUNK (1 billion).  If it did,
then subsequent size checks would eventually catch that error, so we
are instead catching the error before round_up_pow2() is called.

This addresses a minor concern (LJT-01-001) expressed in a security
audit by Cure53.
 2016-02-04 11:37:13 -06:00
DRC
3ee3d8799a Fix Visual C++ compiler warnings 2016-02-04 10:58:10 -06:00
DRC
6c8a71efa7 rdppm.c: formatting tweaks 2016-02-04 10:51:22 -06:00
DRC
271b0bf033 jmemmgr.c: formatting tweaks 2016-02-04 10:08:38 -06:00
DRC
6e053525ee TurboJPEG: Avoid dangling pointers 
This addresses a minor concern (LJT-01-002) expressed in a security
audit by Cure53.  _tjInitCompress() and _tjInitDecompress() call
(respectively) jpeg_mem_dest_tj() and jpeg_mem_src_tj() with a pointer
to a dummy buffer, in order to set up the destination/source manager.
The dummy buffer should never be used, but it's still better to make it
static so that the pointer in the destination/source manager always
points to a valid region of memory.
 2016-02-04 09:20:41 -06:00
DRC
fe11699d90 Adjust performance claims 
Document the latest benchmarks on the Nexus 5X and change the "2-4x"
overall claim to "2-6x".  The peak performance on x86 platforms was
already closer to 5x, and the addition of SIMD-accelerated Huffman
encoding gave it that extra push over the cliff.
 2016-02-03 14:02:13 -06:00
DRC
cf888486d1 Use consistent formatting in ARM NEON SIMD code 
There aren't really any best practices to follow here.  I tried as best
as I could to adopt a standard that would ease any future maintenance
burdens.  The basic tenets of that standard are:

* Assembly instructions always start on Column 5, and operands always
  start on Column 21, except:
  - The instruction and operand can be indented (usually by 2 spaces)
    to indicate a separate instruction stream.
  - If the instruction is within an enclosing .if block in a macro,
    it should always be indented relative to the .if block.
* Comments are placed with an eye toward readability.  There are always
  at least 2 spaces between the end of a line of code and the associated
  in-line comment.  Where it made sense, I tried to line up the comments
  in blocks, and some were shifted right to avoid overlap with
  neighboring instruction lines.  Not an exact science.
* Assembler directives and macros use 2-space indenting rules.  .if
  blocks are indented relative to the macro, and code within the .if
  blocks is indented relative to the .if directive.
* No extraneous spaces between operands.  Lining up the operands
  vertically did not really improve readability-- personally, I think it
  made it worse, since my eye would tend to lose its place in the
  uniform columns of characters.  Also, code with a lot of vertical
  alignment is really hard to maintain, since changing one line could
  necessitate changing a bunch of other lines to avoid spoiling the
  alignment.
* No extraneous spaces in #defines or other directives.  In general, the
  only extraneous spaces (other than indenting spaces) are between:
  - Instructions and operands
  - Operands and in-line comments
This standard should be more or less in keeping with other formatting
standards used within the project.
 2016-02-02 23:39:03 -06:00
DRC
cb49bb00d9 Opt. ARM64 SIMD decompr. for in-order pipelines 
Decompression speedup relative to libjpeg-turbo 1.4.2 (ISLOW IDCT):
48-core ThunderX (RunAbove ARM Cloud), Linux, 64-bit: 60-113% (avg. 86%)
Cortex-A53 (Nexus 5X), Android, 64-bit: 6.8-27% (avg. 14%)
Cortex-A57 (Nexus 5X), Android, 64-bit: 2.0-14% (avg. 6.8%)

Decompression speedup relative to libjpeg-turbo 1.4.2 (IFAST IDCT):
48-core ThunderX (RunAbove ARM Cloud), Linux, 64-bit: 51-98% (avg. 75%)

Minimal speedup (1-5%) observed on iPhone 5S (Cortex-A7)

NOTE: This commit avoids the st3 instruction for non-Android and
non-Apple builds, which may cause a performance regression against
libjpeg-turbo 1.4.x on ARM64 systems that are running plain Linux.
Since ThunderX is the only platform known to suffer from slow ld3 and
st3 instructions, it is probably better to check for the CPU type
at run time and disable ld3/st3 only if ThunderX is detected.

This commit also enables the use of ld3 on Android platforms, which
should be a safe bet, at least for now.  This speeds up compression on
the afore-mentioned Nexus Cortex-A53 by 5.5-19% (avg. 12%) and on the
Nexus Cortex-A57 by 1.2-14% (avg. 6.3%), relative to the previous
commits.

This commit also removes unnecessary macros.

Refer to #52 for discussion.

Closes #52.

Based on:
6bad905034
488dd7bf17
4f4d057c1f
d3198afc43
 2016-02-02 23:14:27 -06:00
DRC
cbfa696fc1 Update Android build instr. for ARMv8, PIE, etc. 
* Include information on how to do a 64-bit ARMv8 build with the latest
NDK
* Suggest -fPIE and -pie as default CFLAGS (required for android-16 and
later.
* Remove -fstrict-aliasing flag (-Wall already includes it)
 2016-02-01 11:28:55 -06:00
DRC
f5cd71c5cf Merge branch '1.4.x' 2016-02-01 11:19:06 -06:00
DRC
da047e8b14 Makefile.am: formatting tweak 2016-02-01 11:17:41 -06:00
DRC
6c3fc97b1a Update Android build instr. for ARMv8, PIE, etc. 
* Include information on how to do a 64-bit ARMv8 build with the latest
NDK
* Suggest -fPIE and -pie as default CFLAGS (required for android-16 and
later.
* Remove -fstrict-aliasing flag (-Wall already includes it)
 2016-02-01 11:12:22 -06:00
DRC
3128061382 TJBench: Fix segfault on Android 
For whatever reason, the "write" global variable in tjbench.c was
overriding the linkage with the write() system function.  This may have
affected other platforms as well but was not known to.
 2016-02-01 11:03:39 -06:00
DRC
8af3f8a9cb Provide pkg-config (.pc) scripts 
This allows a project to use PKG_CHECK_MODULES() in its configure.ac
file to easily check for the presence of libjpeg-turbo and modify the
compiler/linker flags accordingly.  Note that if a project relies solely
on pkg-config to check for libjpeg-turbo, then it will not be possible
to build that project using libjpeg or an earlier version of
libjpeg-turbo.

Closes #53

Based on:
4967138719
 2016-01-18 16:43:50 -06:00
DRC
d38b4f21ec Optimize ARM64 SIMD code for Cavium ThunderX 
Per @ssvb:
ThunderX is an ARM64 chip that dedicates most of its transistor real
estate to providing 48 cores, so each core is not as fast as a result.
Each core is dual-issue & in-order for scalar instructions and has only
a single-issue half-width NEON unit, so the peak throughput is one
128-bit instruction per 2 cycles.  So careful instruction scheduling is
important.  Furthermore, ThunderX has an extremely slow implementation
of ld2 and ld3, so this commit implements the equivalent of those
instructions using ld1.

Compression speedup relative to libjpeg-turbo 1.4.2:
48-core ThunderX (RunAbove ARM Cloud), Linux, 64-bit: 58-85% (avg. 74%)
relative to jpeg-6b: 1.75-2.14x (avg. 1.95x)

Refer to #49 and #51 for discussion.

Closes #51.

This commit also wordsmiths the ChangeLog entry (the ARMv8 SIMD
implementation is "complete" only for compression-- it still lacks some
decompression algorithms, as does the ARMv7 implementation.)

Based on:
9405b5fd03

which is based on:
f561944ff7
962c8ab21f
 2016-01-16 02:39:02 -06:00
DRC
e8aa5fa934 Add JSIMD_NOHUFFENC environment variable for ARM 
Useful in regression/performance testing
 2016-01-15 13:15:54 -06:00
DRC
ec6941f7bc Complete the ARM64 NEON SIMD implementation 
This adds 64-bit NEON coverage for all of the algorithms that are
covered by the 32-bit NEON implementation, except for h2v1 (4:2:2) fancy
upsampling (used when decompressing 4:2:2 JPEG images.)  It also adds
64-bit NEON SIMD coverage for:

* slow integer forward DCT (compressor)
* h2v2 (4:2:0) downsampling (compressor)
* h2v1 (4:2:2) downsampling (compressor)

which are not covered in the 32-bit implementation.

Compression speedups relative to libjpeg-turbo 1.4.2:
Apple A7 (iPhone 5S), iOS, 64-bit: 113-150% (reported)
48-core ThunderX (RunAbove ARM Cloud), Linux, 64-bit: 2.1-33% (avg. 15%)

Refer to #44 and #49 for discussion

This commit also removes the unnecessary

    if (simd_support & JSIMD_ARM_NEON)

statements from the jsimd* algorithm functions.  Since the jsimd_can*()
functions check for the existence of NEON, the corresponding algorithm
functions will never be called if NEON isn't available.

Based on:
dcd9d84f10
b0d87b811f
70cd5c8a49
3e58d9a064
837b19542f
73dc43ccc8
a82b71a261
c1b1188c21
305c89284e
7f443f9995
4c2b53b77d

Unified version with fixes:
1004a3cd05
 2016-01-15 11:21:48 -06:00
DRC
499c470b63 ARM32 NEON SIMD implementation of Huffman encoding 
Full-color compression speedups relative to libjpeg-turbo 1.4.2:

800 MHz ARM Cortex-A9, iOS, 32-bit:  26-44% (avg. 32%)

Refer to #42 and #47 for discussion.

This commit also removes the unnecessary

    if (simd_support & JSIMD_ARM_NEON)

statements from the jsimd* algorithm functions.  Since the jsimd_can*()
functions check for the existence of NEON, the corresponding algorithm
functions will never be called if NEON isn't available.  Removing those
if statements improved performance across the board by a couple of
percent.

Based on:
fc023c880c
 2016-01-13 23:38:35 -06:00
DRC
9c8cee8c29 tjbench: Further tweaks to -nowrite feature 
* Do not compute compression error if -nowrite is specified
* Adjust formatting of -nowrite usage description
 2016-01-13 22:32:19 -06:00
DRC
4e356a92dc BUILDING.md: Restore autotools processing instr. 
Partially reverts 54014d9c2a.  When
building from a git sandbox, as opposed to from an official source
tarball, it is still necessary to run autoreconf.

Closes #48
 2016-01-13 12:27:42 -06:00
DRC
93eaa37a3b Update build instructions for new autoconf, GitHub 
The Linux build machine has been upgraded to autoconf 2.69, automake
1.15, m4 1.4.17, and libtool 2.4.6, so it is no longer necessary to
recommend running autoreconf prior to building the source, if one is
building from an official source tarball (as opposed to from a git
sandbox.)  Also, there is no SVN repository anymore (oops.)
 2016-01-13 12:20:01 -06:00
DRC
f3a8684cd1 SSE2 SIMD implementation of Huffman encoding 
Full-color compression speedups relative to libjpeg-turbo 1.4.2:

2.8 GHz Intel Xeon W3530, Linux, 64-bit:  2.2-18% (avg. 9.5%)
2.8 GHz Intel Xeon W3530, Linux, 32-bit:  10-25% (avg. 17%)

2.3 GHz AMD A10-4600M APU, Linux, 64-bit:  4.9-17% (avg. 11%)
2.3 GHz AMD A10-4600M APU, Linux, 32-bit:  8.8-19% (avg. 15%)

3.0 GHz Intel Core i7, OS X, 64-bit:  3.5-16% (avg. 10%)
3.0 GHz Intel Core i7, OS X, 32-bit:  4.8-14% (avg. 11%)

2.6 GHz AMD Athlon 64 X2 5050e:
Performance-neutral (give or take a few percent)

Full-color compression speedups relative to IPP:

2.8 GHz Intel Xeon W3530, Linux, 64-bit:  4.8-34% (avg. 19%)
2.8 GHz Intel Xeon W3530, Linux, 32-bit:  -19%-7.0% (avg. -7.0%)

Refer to #42 for discussion.  Numerous other approaches were attempted,
but this one proved to be the most performant across all platforms.

This commit also fixes #3 (works around, really-- the clang-compiled version
of jchuff.c still performs 20% worse than its GCC-compiled counterpart, but
that code is now bypassed by the new SSE2 Huffman algorithm.)

Based on:
2cb4d41330
36c94e050d
 2016-01-12 03:03:49 -06:00
DRC
eb59b6e72d Add -nowrite arg to TJBench to improve consistency 
Prevents any images from being written to disk, thus making the
performance of the benchmark as CPU-bound as possible.
 2016-01-12 00:36:32 -06:00
DRC
368cd52d38 Allow JSIMD_FORCENONE=1 env to disable x86-64 SIMD 
Traditionally, the x86-64 code did not call init_simd() because it had
no need to (only SSE2 was supported.)  However, having the ability to
disable SIMD at run time is a useful testing tool, and all of the other
SIMD implementations have this ability.
 2016-01-12 00:29:34 -06:00
DRC
e7f1418525 1.4.3 2016-01-06 19:25:28 -06:00
DRC
2111c5acda Merge branch '1.4.x' 2016-01-06 19:24:55 -06:00
DRC
5a3b4fed4b Regression: Allow co-install of 32-bit/64-bit RPMs 
Fix a regression introduced in 1.4.1 that prevented 32-bit and 64-bit
libjpeg-turbo RPMs from being installed simultaneously on recent Red
Hat/Fedora distributions.  This was due to the addition of the
SIZEOF_SIZE_T macro in jconfig.h, which allows the Huffman codec to
determine the word size at compile time.  Since that macro differs
between 32-bit and 64-bit builds, this caused a conflict between the
i386 and x86_64 RPMs (any differing files, other than executables, are
not allowed when 32-bit and 64-bit RPMs are installed simultaneously.)
Since the macro is used only internally, it has been moved into
jconfigint.h.
 2016-01-06 19:17:54 -06:00
DRC
5f2cbbd039 Fix iOS ARM64 build broken by removal of .arch 
The unnecessary .arch directive was removed from the ARM64 SIMD code
in d70a5c12fc, thus allowing clang's
integrated assembler to assemble the code on Linux systems.  However,
this broke the detection mechanism in acinclude.m4 that tells the build
system whether it needs to use gas-preprocessor.pl.  Since one of the
primary motivators for using gas-preprocessor.pl with ARM64 builds is
the lack of .req/.unreq directives in Apple's implementation of clang,
acinclude.m4 now checks whether .req/.unreq can be properly assembled
and uses gas-preprocessor.pl if not.

Closes #33.
 2016-01-06 14:02:27 -06:00
DRC
fbe5007fbc Merge branch '1.4.x' 2015-12-19 14:29:46 -06:00
DRC
71e971fb35 Build: Use FILEPATH type for NASM CMake variable 
This causes cmake-gui to to display the proper file chooser dialog
(as opposed to the directory chooser.)

Fixes #40
 2015-12-19 14:18:21 -06:00
DRC
6fa5ebdc10 cjpeg: Adjust claims RE: image quality settings 
Quality values > 95 are not useless.  They just may not provide as good
of a size vs. perceptual quality tradeoff as lower quality values.  This
also displays the default quality value in the cjpeg usage.

Closes #39
 2015-12-17 10:41:51 -06:00
DRC
d70a5c12fc Remove unnecessary .arch directive in ARM64 code 
This directive was preventing the code from assembling using the
integrated assembler in clang.

Fixes #33
 2015-12-14 17:02:43 -06:00
DRC
aa769febf2 Fix compiler warnings under Visual C++ 
A few of these are long-standing, but most were exposed when switching
from INT32 to JLONG.
 2015-10-15 02:25:00 -05:00
DRC
d65e768b2e Fix additional issues reported by UB sanitizers 
Most of these involved overrunning the signed 32-bit JLONG type whenever
building libjpeg-turbo with a 32-bit compiler.  These issues are not
believed to represent actual security threats, but eliminating them
makes it easier to detect such threats should they arise in the future.
 2015-10-14 22:59:51 -05:00
DRC
1e32fe3113 Replace INT32 with a new internal datatype (JLONG) 
These days, INT32 is a commonly-defined datatype in system headers.  We
cannot eliminate the definition of that datatype from jmorecfg.h, since
the INT32 typedef has technically been part of the libjpeg API since
version 5 (1994.)  However, using INT32 internally is risky, because the
inclusion of a particular header (Xmd.h, for instance) could change the
definition of INT32 from long to int on 64-bit platforms and thus change
the internal behavior of libjpeg-turbo in unexpected ways (for instance,
failing to correctly set __INT32_IS_ACTUALLY_LONG to match the INT32
typedef-- perhaps as a result of including the wrong version of
jpeglib.h-- could cause libjpeg-turbo to produce incorrect results.)

The library has always been built in environments in which INT32 is
effectively long (on Windows, long is always 32-bit, so effectively it's
the same as int), so it makes sense to turn INT32 into an explicitly
long datatype.  This ensures that libjpeg-turbo will always behave
consistently, regardless of the headers included at compile time.

Addresses a concern expressed in #26.
 2015-10-14 20:34:32 -05:00
DRC
250c887763 ChangeLog: acknowledge existence of 1.4.2 2015-10-13 13:37:32 -05:00
DRC
e42032ba62 README.md: create link for jcstest.c 2015-10-10 10:56:58 -05:00
DRC
17de518357 Markdown versions of README, LICENSE, BUILDING 2015-10-10 10:34:55 -05:00
DRC
7e3acc0e0a Rename README, LICENSE, BUILDING text files 
The IJG README file has been renamed to README.ijg, in order to avoid
confusion (many people were assuming that that was our project's README
file and weren't reading README-turbo.txt) and to lay the groundwork for
markdown versions of the libjpeg-turbo README and build instructions.
 2015-10-10 10:31:33 -05:00
DRC
ac85335cd8 Merge branch '1.4.x' 2015-10-09 20:03:59 -05:00
DRC
bf04316e63 Comment formatting tweaks 2015-10-09 20:02:31 -05:00
DRC
d8da49effe Fix 'make dist' 2015-09-21 13:45:45 -05:00
DRC
30ebafda2a 1.4.2 2015-09-21 13:43:36 -05:00
DRC
60efb896e0 Merge branch '1.4.x' 2015-09-21 13:17:17 -05:00
DRC
8e9cef2e6f Fix various issues reported by the UB sanitizers 
Most of these involved left shifting a negative number, which is
technically undefined (although every modern compiler I'm aware of
will implement this by treating the signed integer as a 2's complement
unsigned integer-- the LEFT_SHIFT() macro just makes this behavior
explicit in order to shut up ubsan.)  This also fixes a couple of
non-issues in the entropy codecs, whereby the sanitizer reported an
out-of-bounds index in the 4th argument of jpeg_make_d_derived_tbl().
In those cases, the index was actually out of bounds (caused by a
malformed JPEG image), but jpeg_make_d_derived_tbl() would have caught
the error and aborted prior to actually using the invalid address.  Here
again, the fix was to make our intentions explicit so as to shut up
ubsan.
 2015-09-21 13:12:04 -05:00
DRC
870b4f28b4 Fix ChangeLog numbering biffed by previous merge 2015-09-16 23:26:13 -05:00
DRC
b961f0bfce Merge branch '1.4.x' 2015-09-16 23:16:38 -05:00
James Cowgill
54792ba340 Fix MIPS DSPr2 4:2:0 upsample bug w/ small images 
The DSPr2 code was errantly comparing the residual (t9, width & 0xF)
with the end pointer (t4, out + width) instead of the width directly
(a1).  This would give the wrong results with any image whose output
width was less than 16.  The other small changes (ulw to lw and removal
of the nop) are just some easy optimizations around this code.

This issue caused a buffer overrun and subsequent segfault on images
whose scaled output height was 1 pixel and whose scaled output width was
< 16 pixels.  Note that the "plain" (non-fancy and non-merged) upsample
routine, which was affected by this bug, is normally not used except
when decompressing a non-YCbCr JPEG image, but it is also used when
decompressing a single-row image (because the other upsampling
algorithms require at least two rows.)

Closes #16.
 2015-09-16 23:15:22 -05:00
Chandler Carruth
498d9bc92f Fix x86-64 ABI conformance issue in SIMD code 
(descriptions cribbed by DRC from discussion in #20)
In the x86-64 ABI, the high (unused) DWORD of a 32-bit argument's
register is undefined, so it was incorrect to use a 64-bit mov
instruction to transfer a JDIMENSION argument in the 64-bit SSE2 SIMD
functions.  The code worked thus far only because the existing compiler
optimizers weren't smart enough to do anything else with the register in
question, so the upper 32 bits happened to be all zeroes-- for the past
6 years, on every x86-64 compiler previously known to mankind.

The bleeding-edge Clang/LLVM compiler has a smarter optimizer, and
under certain circumstances, it will attempt to load-combine adjacent
32-bit integers from one of the libjpeg structures into a single 64-bit
integer and pass that 64-bit integer as a 32-bit argument to one of the
SIMD functions (which is allowed by the ABI, since the upper 32 bits of
the 32-bit argument's register are undefined.)  This caused the
libjpeg-turbo regression tests to crash.

Also enhance the documentation of JDIMENSION to explain that its size
is significant to the implementation of the SIMD code.

Closes #20.  Refer also to http://crbug.com/532214.
 2015-09-16 22:35:31 -05:00
DRC
b4922b42e7 Merge branch '1.4.x' 2015-09-08 19:02:18 -05:00
DRC
465a9fe0cb Add file that explains the libjpeg-turbo licenses 
Previously this information was found in a page on libjpeg-turbo.org,
but there was still some confusion, because README-turbo.txt wasn't
clear as to which license applied to what.
 2015-09-08 18:59:37 -05:00
DRC
00d82c425e Merge branch '1.4.x' 2015-08-29 18:15:25 -05:00
DRC
b5a55e6dd7 Fix negative shift with IFAST FDCT and qual=100 
With certain images, compressing using quality=100 and the fast integer
forward DCT will cause the divisor passed to compute_reciprocal() to be
1.  In those cases, the library already disables the SIMD quantization
algorithm to avoid 16-bit overflow.  However, compute_reciprocal()
doesn't properly handle the divisor==1 case, so we need to use special
values in that case so that the C quantization algorithm will behave
like an identity function.
 2015-08-29 18:10:58 -05:00
James Cowgill
f62dbccf5f Fix build error when compiling MIPS SIMD w/ -mfpxx 
When compiled with -mfpxx (which is now the default on Debian), there are
some restrictions on the use of odd-numbered FP registers. More details
about FPXX can be found here:
https://dmz-portal.mips.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking

This commit simply changes all uses of FP registers to an even-numbered
equivalent like this:
 f0 -> f0
 f1 -> f2
 f2 -> f4
 ...
 f8 -> f16

This commit should have no observable effect except that the MIPS assembly
will now compile with -mfpxx.

Closes #11
 2015-08-26 21:30:18 -05:00
DRC
b657631953 Merge branch '1.4.x' 2015-08-26 20:31:13 -05:00
DRC
58ae401e50 Eliminate cppcheck false positive in turbojpeg.c 2015-08-26 20:29:36 -05:00
DRC
333f3cf756 Fix 'make dist' 2015-08-15 17:04:58 -05:00
DRC
73befdb148 Merge branch '1.4.x' 2015-08-14 11:48:05 -05:00
Frank Bossen
6709e4a0cf Check range of integer values in PPM text file 
Add checks to ensure values are within the specified range.

Fixes mozilla/mozjpeg#141, closes #8
 2015-08-14 11:42:29 -05:00
Frank Bossen
82923eb93a Check image size when reading targa file 
Throw an error when image width or height is 0.

Fixes mozilla/mozjpeg#140, closes #7.
 2015-08-14 11:42:23 -05:00
DRC
a3ef34c626 Fix cjpeg segfault when Windows BMP width/height<0 
rdbmp.c used the ambiguous INT32 datatype, which is sometimes typedef'ed
to long.  Windows bitmap headers use 32-bit signed integers for the
width and height, because height can sometimes be negative (this
indicates a top-down bitmap.)  If biWidth or biHeight was negative and
INT32 was a 64-bit long, then biWidth and biHeight were read as a
positive integer > INT32_MAX, which failed the test in line 385:

    if (biWidth <= 0 || biHeight <= 0)
        ERREXIT(cinfo, JERR_BMP_EMPTY);

This commit refactors rdbmp.c so that it uses the datatypes specified by
Microsoft for the Windows BMP header.

This closes #9 and also provides a better solution for mozilla/mozjpeg#153.
 2015-08-13 20:24:27 -05:00
DRC
6fa14b37ee Declare source buffers in TurboJPEG C API as const 
This reassures the caller that the buffers will not be modified and also
allows read-only buffers to be passed to the functions.

Partially reverts 3947a19f25fc8186d3812dbcf8e70baea36ef652.
 2015-08-13 20:08:08 -05:00
DRC
ce4ff407ff Merge branch '1.4.x' 2015-08-13 18:09:20 -05:00
DRC
b1682fb7c8 Tabs to spaces in turbojpeg.h 
This was a formatting regression in 1.4.x introduced when the new
TurboJPEG functions were added.
 2015-08-13 18:05:32 -05:00
DRC
b2db23c449 Merge pull request #10 from pornel/const 
Declare inbuffer arg in jpeg_mem_src() to be const
This reassures the caller that the buffer will not be modified and also
allows read-only buffers to be passed to the function.
 2015-08-13 16:51:08 -05:00
Kornel Lesiński
7222ec2717 Declare inbuffer const 2015-08-13 22:44:51 +01:00
DRC
8fb37b8171 Fix cjpeg segfault when Windows BMP width/height<0 
rdbmp.c used the ambiguous INT32 datatype, which is sometimes typedef'ed
to long.  Windows bitmap headers use 32-bit signed integers for the
width and height, because height can sometimes be negative (this
indicates a top-down bitmap.)  If biWidth or biHeight was negative and
INT32 was a 64-bit long, then biWidth and biHeight were read as a
positive integer > INT32_MAX, which failed the test in line 385:

    if (biWidth <= 0 || biHeight <= 0)
        ERREXIT(cinfo, JERR_BMP_EMPTY);

This commit refactors rdbmp.c so that it uses the datatypes specified by
Microsoft for the Windows BMP header.

This closes #9 and also provides a better solution for mozilla/mozjpeg#153.
 2015-08-13 11:09:05 -05:00
DRC
b3b3b29e4c Update x86[-64] assembler recommendations 
NASM 2.11.08 has a bug that prevents it from properly assembling a
macho64 version of libjpeg-turbo (the resulting binary generates corrupt
images.)  2.11.09 works properly.  YASM also works properly and has been
a supported alternative since libjpeg-turbo 1.2.
 2015-08-03 23:59:27 -05:00
DRC
7170d9e0e5 Update x86[-64] assembler recommendations 
NASM 2.11.08 has a bug that prevents it from properly assembling a
macho64 version of libjpeg-turbo (the resulting binary generates corrupt
images.)  2.11.09 works properly.  YASM also works properly and has been
a supported alternative since libjpeg-turbo 1.2.
 2015-08-03 23:59:12 -05:00
DRC
57e206662a Update x86[-64] assembler recommendations 
NASM 2.11.08 has a bug that prevents it from properly assembling a
macho64 version of libjpeg-turbo (the resulting binary generates corrupt
images.)  2.11.09 works properly.  YASM also works properly and has been
a supported alternative since libjpeg-turbo 1.2.
 2015-08-03 23:58:40 -05:00
DRC
939e466082 Update x86[-64] assembler recommendations 
NASM 2.11.08 has a bug that prevents it from properly assembling a
macho64 version of libjpeg-turbo (the resulting binary generates corrupt
images.)  2.11.09 works properly.  YASM also works properly and has been
a supported alternative since libjpeg-turbo 1.2.
 2015-08-03 23:56:09 -05:00
DRC
7c726a4515 Update URL for our custom gas-preprocessor.pl 2015-08-03 13:24:22 -05:00
DRC
a61fd32137 Update URL for our custom gas-preprocessor.pl 2015-08-03 13:16:21 -05:00
DRC
944aa8e3c4 Fix rare bug: right shift by a negative # of bits 
Under very rare circumstances, decompressing specific corrupt JPEG
images would create a situation whereby GET_BITS(1) was invoked
from within HUFF_DECODE_FAST() when bits_left=0. This produced a right
shift by a negative number of bits, which is undefined in C.
 2015-07-29 17:19:35 -05:00
DRC
2a0b4ac337 Fix rare bug: right shift by a negative # of bits 
Under very rare circumstances, decompressing specific corrupt JPEG
images would create a situation whereby GET_BITS(1) was invoked
from within HUFF_DECODE_FAST() when bits_left=0. This produced a right
shift by a negative number of bits, which is undefined in C.
 2015-07-29 17:19:15 -05:00
DRC
cf0e58de53 Fix rare bug: right shift by a negative # of bits 
Under very rare circumstances, decompressing specific corrupt JPEG
images would create a situation whereby GET_BITS(1) was invoked
from within HUFF_DECODE_FAST() when bits_left=0. This produced a right
shift by a negative number of bits, which is undefined in C.
 2015-07-29 17:18:18 -05:00
Ondřej Surý
b6590d67b3 Convert the BUILD stamp to AC_ARG_WITH argument, so we can make the build reproducible 2015-07-29 13:23:27 -05:00
DRC
22eb6c2bf3 Convert svn:ignore properties to .gitignore 2015-07-29 12:55:11 -05:00
DRC
9a2a42d8ee Convert svn:ignore properties to .gitignore 2015-07-29 12:55:53 -05:00
DRC
8c4c6d29e6 Convert svn:ignore properties to .gitignore 2015-07-29 12:56:16 -05:00
DRC
9993410e44 Convert svn:ignore properties to .gitignore 2015-07-29 12:54:44 -05:00
DRC
b3b9a213bf Convert svn:ignore properties to .gitignore 2015-07-29 12:53:02 -05:00
DRC
9bbf2b8551 Merge pull request #4 from oerdnj/master 
Allow BUILD to be specified on the configure command line
 2015-07-28 12:56:16 -05:00
Ondřej Surý
45a2369b44 Convert the BUILD stamp to AC_ARG_WITH argument, so we can make the build reproducible 2015-07-28 09:19:13 +02:00
DRC
99f0289606 Convert svn:ignore properties to .gitignore 2015-07-27 03:52:35 -05:00
DRC
03e755bbd3 Further improvements to partial image decoding 
When using context-based upsampling, use a dummy color conversion
routine instead of a dummy row buffer. This improves performance
(since the actual color conversion routine no longer has to be called),
and it also fixes valgrind errors when decompressing to RGB565.
Valgrind previously complained, because using the RGB565 color
converter with the dummy row buffer was causing a table lookup with
undefined indices.
 2015-07-27 03:44:20 -05:00
DRC
74b9f609a2 Fix rare bug: right shift by a negative # of bits 
Under very rare circumstances, decompressing specific corrupt JPEG
images would create a situation whereby GET_BITS(1) was invoked
from within HUFF_DECODE_FAST() when bits_left=0. This produced a right
shift by a negative number of bits, which is undefined in C.
 2015-07-27 03:43:40 -05:00
DRC
739edeb8a6 Further exception cleanup 
Use a new checked exception type (TJException) when passing through
errors from the underlying C library. This gives the application a
choice of catching all exceptions or just those from TurboJPEG.

Throw IllegalArgumentException at the JNI level when arguments to the
JNI function are incorrect, and when one of the TurboJPEG "utility"
functions returns an error (because, per the C API specification, those
functions will only return an error if one of their arguments is out of
range.)

Remove "throws Exception" from the signature of any methods that no
longer pass through an error from the TurboJPEG C library.

Credit Viktor for the new code

Code formatting tweaks
 2015-07-27 03:40:58 -05:00
DRC
a3deac158b Fix build whenever IDCT_SCALING_SUPPORTED is undefined 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1597 632fc199-4ca6-4c93-a231-07263d6284db
 2015-07-14 20:51:53 +00:00
DRC
10dc5cfeff Fix build whenever IDCT_SCALING_SUPPORTED is undefined 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1596 632fc199-4ca6-4c93-a231-07263d6284db
 2015-07-14 20:51:20 +00:00
DRC
b3817dab86 Throw idiomatic unchecked exceptions from the Java classes and JNI wrapper if there is an unrecoverable error caused by incorrect API usage (such as illegal arguments, etc.), and throw Errors if there is an unrecoverable error at the C level (such as a failed malloc() call.) 
Change the behavior of the bailif0() macro in the JNI wrapper so that it doesn't throw an exception for an unexpected NULL condition.  In fact, in all cases, the underlying JNI API function (such as GetFieldID(), etc.) will throw an Error on its own whenever it returns NULL, so our custom exceptions were never being thrown in that case anyhow.  All we need to do is just detect the error and bail out of the C code.

This also corrects a couple of formatting issues (semicolons aren't needed at the end of class definitions, and @Override should be specified for the methods we're overriding from super-classes, so the compiler can sanity-check that we're actually overriding a method and not declaring a new one.)


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1595 632fc199-4ca6-4c93-a231-07263d6284db
 2015-07-14 20:42:52 +00:00
DRC
1a4778f8f0 Allow TJCompressor and TJDecompressor to be used with a try-with-resources statement in Java 7 and later. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1594 632fc199-4ca6-4c93-a231-07263d6284db
 2015-07-07 16:39:03 +00:00
DRC
c23e36e800 Add additional protections against defining INT32 if another header has already defined it (code borrowed from libjpeg v8.) This isn't necessary when using the libjpeg-turbo build system on Windows, because the CMake generated jconfig.h defines INT32 and then defines XMD_H to trick jmorecfg.h into not redefining it. However, some projects build libjpeg-turbo using their own build systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1593 632fc199-4ca6-4c93-a231-07263d6284db
 2015-07-06 16:04:04 +00:00
DRC
65c5ec2f0f Add additional protections against defining INT32 if another header has already defined it (code borrowed from libjpeg v8.) This isn't necessary when using the libjpeg-turbo build system on Windows, because the CMake generated jconfig.h defines INT32 and then defines XMD_H to trick jmorecfg.h into not redefining it. However, some projects build libjpeg-turbo using their own build systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1592 632fc199-4ca6-4c93-a231-07263d6284db
 2015-07-06 16:02:57 +00:00
DRC
9cc597221e Fix a memory leak in jpeg_skip_scanlines() 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1591 632fc199-4ca6-4c93-a231-07263d6284db
 2015-07-01 16:56:44 +00:00
DRC
6ed4d9d110 Increment SO_AGE to reflect the addition of a new interface to the libjpeg API 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1590 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-27 08:10:34 +00:00
DRC
306e1d2d77 Add jpeg_skip_scanlines() to the Windows DLL export list. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1589 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-27 08:10:33 +00:00
DRC
162c9985d6 Fix compiler warnings in jpeg_skip_scanlines() when building under Visual Studio. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1588 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-27 08:10:32 +00:00
DRC
7a7da9460a Add regression tests for jpeg_skip_scanlines(); change "stripe" to "strip" in djpeg; document -strip and -skip parameters in djpeg 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1587 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-27 08:10:31 +00:00
DRC
ac09954b1d Fix a couple of seg faults discovered when testing the new jpeg_skip_scanlines() function + remove comment that is no longer relevant. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1586 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-27 08:10:30 +00:00
DRC
6a25894472 Make sure that Java is disabled when 12-bit is enabled (Java requires TurboJPEG, which currently only supports 8-bit samples), and tabs-->spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1585 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-27 07:57:44 +00:00
DRC
ecc583682a Make sure that Java is disabled when 12-bit is enabled (Java requires TurboJPEG, which currently only supports 8-bit samples), and tabs-->spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1584 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-27 07:56:29 +00:00
DRC
07afe8a50f Add a -skip option to djpeg, which opens up further regression testing options. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1583 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-25 03:44:37 +00:00
DRC
eb32cc1e6d Add a new libjpeg API function (jpeg_skip_scanlines()) to allow for partially decoding a JPEG image. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1582 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-25 03:44:36 +00:00
DRC
691cd93383 Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1574 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-20 16:36:32 +00:00
DRC
54014d9c2a The Linux build machine has been upgraded to autoconf 2.69, automake 1.15, m4 1.4.17, and libtool 2.4.6, so it is no longer necessary to recommend running autoreconf prior to building the source. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1573 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-20 16:27:51 +00:00
DRC
06bf10d19e Studies show that GCC v5.1.0 performs as well as or better than v4.2, but v4.7.x-v4.9.x do not perform as well as v4.2. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1572 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-20 16:21:33 +00:00
DRC
89b5e06df5 Studies show that GCC v5.1.0 performs as well as or better than v4.2, but v4.7.x-v4.9.x do not perform as well as v4.2. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1571 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-20 16:20:53 +00:00
DRC
eea6424596 Typo 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1570 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-20 15:51:34 +00:00
DRC
7a8c53e4bd Clarify that the TurboJPEG API functions/methods do not modify the source buffer. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1567 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-19 16:07:14 +00:00
DRC
db6d8fca59 Now that the TurboJPEG API is reporting libjpeg warnings as errors, an "Invalid SOS parameters for sequential JPEG" warning surfaced in tjDecodeYUV*(). This was caused by the Se member of jpeg_decompress_struct being set to 0 (it is normally set to a non-zero value when the start-of-scan markers are read, but there are no SOS markers in this case, because we're not actually decompressing a JPEG file.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1564 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-08 18:31:34 +00:00
DRC
f15ef33768 Fix a segfault that occured in the MIPS DSPr2 fancy upsampling routine when downsampled_width==3. Because the DSPr2 code unrolls the loop for the middle columns (refer to jdsample.c), it has the effect of performing two column iterations, and that only works properly if the number of columns (minus the first and last) is >= 2. For the specific case of downsampled_width==3, this patch skips to the second iteration of the unrolled column loop. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1562 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-08 17:41:34 +00:00
DRC
1f79c7c8c8 If a warning (such as "Premature end of JPEG file") is triggered in the underlying libjpeg API, make sure that the TurboJPEG API function returns -1. Unlike errors, however, libjpeg warnings do not make the TurboJPEG functions abort. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1561 632fc199-4ca6-4c93-a231-07263d6284db
 2015-06-01 19:22:41 +00:00
DRC
bec45b162b Back out r1555 and r1548. Using setenv() didn't fix the iOS simulator issue. It just replaced an undefined _putenv$UNIX2003 symbol with an undefined _setenv$UNIX2003 symbol. The correct solution seems to be to use -D_NONSTD_SOURCE when generating our official builds. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1557 632fc199-4ca6-4c93-a231-07263d6284db
 2015-05-17 15:56:18 +00:00
DRC
80bbd3908f Fix the Windows build. I remember now why I used putenv() originally-- because Windows doesn't have setenv(). We could use _putenv_s(), but older versions of MinGW don't have that either. Fortunately, since all of the environment values we're setting in turbojpeg.c are static, we can just map setenv() to putenv() using a macro. NOTE: we still have to use _putenv_s() in turbojpeg-jni.c, but at least people who may need to build with an older version of MinGW can still do so by disabling the Java build. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1555 632fc199-4ca6-4c93-a231-07263d6284db
 2015-05-16 04:18:21 +00:00
DRC
665c96edaa Allow building only static or only shared libraries on Windows 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1553 632fc199-4ca6-4c93-a231-07263d6284db
 2015-05-15 22:08:21 +00:00
DRC
3ebcc3206f __WORDSIZE doesn't seem to be available on platforms other than Mac or Linux, and best practices are for user-level code not to rely on it anyhow, since it's meant to be an internal macro. Fortunately, autoconf already has a way of determining the word size at configure time, so it can be passed into the compiler. This should work on any platform and has been tested on all of the Un*x platforms we support (Linux, Mac, FreeBSD, Solaris.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1550 632fc199-4ca6-4c93-a231-07263d6284db
 2015-05-15 19:09:44 +00:00
DRC
44320a210b Unless you define _ANSI_SOURCE, then putenv() on Mac is renamed to putenv$UNIX2003(), and this causes problems when trying to link an i386 iOS application (for the simulator) against the TurboJPEG static library. It's easiest to just use setenv() instead. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1548 632fc199-4ca6-4c93-a231-07263d6284db
 2015-05-15 18:23:59 +00:00
DRC
a8b6ea2f8d Fix a bug in the 64-bit Huffman encoder that Google discovered when encoding some very specific (and proprietary) aerial images using quality=98, an optimized Huffman table, and the ISLOW DCT. These images were causing the Huffman bit buffer to overflow, because the code for encoding the DC coefficient was using the equivalent of the 32-bit version of EMIT_BITS(). Thus, when 64-bit code was used, the DC coefficient code was not properly checking how many bits were in the buffer before attempting to add more bits to it. This issue appears to have existed in all versions of libjpeg-turbo. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1547 632fc199-4ca6-4c93-a231-07263d6284db
 2015-05-06 22:41:12 +00:00
DRC
96869f4b6e Restore backward compatibility with MSVC < 2010 (broken by r1541) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1543 632fc199-4ca6-4c93-a231-07263d6284db
 2015-04-30 09:05:53 +00:00
DRC
f64b36fd57 Oops. OS X doesn't define __WORDSIZE unless you include stdint.h, so apparently the Huffman codec hasn't ever been fully accelerated on 64-bit OS X. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1541 632fc199-4ca6-4c93-a231-07263d6284db
 2015-04-22 08:43:04 +00:00
DRC
89a3f970da Allow the executables and libraries outside of the sharedlib/ directory to be linked against msvcr*.dll instead of libcmt*.lib. This is reported to be necessary when building libjpeg-turbo for use with C#. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1539 632fc199-4ca6-4c93-a231-07263d6284db
 2015-03-19 19:27:40 +00:00
DRC
feccdcf8c8 Surround the usage of getenv() in the TurboJPEG API with #ifndef NO_GETENV so that developers can add -DNO_GETENV to the C flags when building for platforms that don't have getenv(). Currently this is known to be necessary when building for Windows Phone. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1537 632fc199-4ca6-4c93-a231-07263d6284db
 2015-02-23 19:19:40 +00:00
DRC
c69a1cd7a0 If libjpeg-turbo is configured with a non-default prefix, such as /usr, then use the docdir variable defined by autoconf 2.60 and later, if available. This will, for instance, install the documentation under /usr/share/doc/libjpeg-turbo by default if prefix=/usr, unless docdir is overridden. When using earlier versions of autoconf, docdir is set to ${datadir}/doc, as it always has been. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1535 632fc199-4ca6-4c93-a231-07263d6284db
 2015-02-23 19:06:44 +00:00
DRC
3b7015d5d8 Enable silent build rules for the NASM objects, if the source is configured with automake 1.11 or later. NOTE: the build still spits out "error: ignoring unknown tag NASM" for each object, but unfortunately, if we remove "--tag NASM" from the command line, the build breaks under older versions of automake (it aborts with "unable to infer tagged configuration.") 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1534 632fc199-4ca6-4c93-a231-07263d6284db
 2015-02-23 19:03:29 +00:00
DRC
cab2a8503e Set the RPM and deb architecture properly on non-x86 platforms. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1531 632fc199-4ca6-4c93-a231-07263d6284db
 2015-02-20 20:12:15 +00:00
DRC
771ab19437 Extend the AltiVec VMX SIMD routines to support little endian PowerPC platforms. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1529 632fc199-4ca6-4c93-a231-07263d6284db
 2015-02-20 19:57:21 +00:00
DRC
eb319ed8a4 Come on, Cohaagen, you got what you want. Give these people air! 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1528 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-28 00:26:28 +00:00
DRC
3f7608348d Come on, Cohaagen, you got what you want. Give these people air! 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1527 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-28 00:25:43 +00:00
DRC
2e429094a4 Oops. Need to set the alpha channel when using TYPE_4BYTE_ABGR*. This has no bearing on the actual tests, but it prevents the PNG pre-encode reference images for those tests from being blank. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1526 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-27 21:00:22 +00:00
DRC
dcf9f15d6e Oops. Need to set the alpha channel when using TYPE_4BYTE_ABGR*. This has no bearing on the actual tests, but it prevents the PNG pre-encode reference images for those tests from being blank. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1525 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-27 20:59:16 +00:00
DRC
8b5a0093ee Oops. The MIPS SIMD implementations of h2v1 and h2v2 upsampling were not checking for DSPr2 support, so running 'djpeg -nosmooth' on a non-DSPr2-enabled platform caused an "illegal instruction" error. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1523 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-21 17:42:28 +00:00
DRC
0e94025ac7 Introduce fast paths to speed up NULL color conversion somewhat, particularly when using 64-bit code; on the decompression side, the "slow path" also now use an approach similar to that of the compression side (with the component loop outside of the column loop rather than inside.) This is faster when using 32-bit code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1521 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-20 10:33:32 +00:00
DRC
c60d662ee4 Some clarifications (actually MIPS doesn't implement the float DCT/IDCT using SIMD instructions) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1517 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 07:16:53 +00:00
DRC
3af282df3c Make the floating point regression tests optional. It has been known for quite some time that these tests do not always generate the same results unless there is full SIMD coverage of the floating point algorithms in libjpeg-turbo. Further research reveals that there are basically three expected results: the results from our SSE SIMD extensions (which are slightly more accurate than the C code), results from the C code when running on a 32-bit FPU (or when using SSE instructions on an x86-64 CPU, which is the default with GCC), and results from the C code when running on a 64-bit FPU (which presumably uses double-precision arithmetic by default.) There is basically no way to determine which type of math will be used prior to run time, so it's best to just let the developers specify which result they expect on their particular system. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1515 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 06:53:36 +00:00
DRC
dd7f03be56 In the process of developing the AltiVec extensions, it was discovered that the normal regression tests aren't sufficient to test the behavior of the library with very small image sizes and when compressing from/decompressing to a subregion of a larger image buffer. Thus, an additional regression test was added that takes advantage of the tiled compression/decompression feature in tjbench. This is being back-ported to the 1.4.x branch primarily to verify that there are no lingering issues in the existing SIMD extensions. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1514 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 06:45:54 +00:00
DRC
cbc4b53169 Add separate pseudo-targets for the TurboJPEG and libjpeg regression tests, for those times when you just don't want to sit through 11 iterations of TJUnitTest to find out that your algorithm is broken. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1513 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 06:37:03 +00:00
DRC
ffd9d052f6 Bump copyright year 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1512 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 06:34:08 +00:00
DRC
cbc9970ecb Add the ability to benchmark YCCK JPEG compression/decompression. This is particularly useful since that is the only way to test the performance of the "plain" upsampling routines, which are accelerated on some platforms. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1511 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 06:29:52 +00:00
DRC
2b7a391672 1.4.1 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1510 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 06:17:05 +00:00
DRC
2e2ea8e02c Document AltiVec extensions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1508 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 03:21:05 +00:00
DRC
246b01bb0a Revert r1506 (we actually are generating columns with the IDCT, so the naming makes sense in retrospect); further de-confusification in the forward DCT 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1507 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-16 03:13:16 +00:00
DRC
c4e3c361d7 De-confusify the variable names a bit -- "out" represents the output of the IDCT kernel, so use "final" to represent the packed data that will be stored to memory. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1506 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-15 08:51:31 +00:00
DRC
2ab5ea6c48 Add the ability to benchmark YCCK JPEG compression/decompression. This is particularly useful since that is the only way to test the performance of the "plain" upsampling routines, which are accelerated on some platforms. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1505 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-14 19:39:01 +00:00
DRC
c641cddb80 AltiVec SIMD implementation of H2V1 and H2V2 plain upsampling (used only when decompressing YCCK images with fast upsampling enabled.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1504 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-14 15:41:11 +00:00
DRC
86af36aebc AltiVec SIMD implementation of H2V1 and H2V2 merged upsampling 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1503 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-14 13:27:32 +00:00
DRC
11c4010c3c Fix an overread detected by valgrind 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1502 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-14 13:07:06 +00:00
DRC
2517ef72ed Fix bugs in the AltiVec fancy upsampling routines uncovered during additional testing with small image sizes. Since the input width is half the output width, the upsampler should only write a second 16-byte chuck if there are more than 8 input columns left. Additionally, if the width is < 16, then we need to insert a dummy sample (the SSE2 code does this as well, but I neglected to port that portion of the code for some reason.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1501 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-14 10:45:31 +00:00
DRC
9ab2c1071b In the process of developing the AltiVec extensions, it was discovered that the normal regression tests aren't sufficient to test the behavior of the library with very small image sizes and when compressing from/decompressing to a subregion of a larger image buffer. Thus, an additional regression test was added that takes advantage of the tiled compression/decompression feature in tjbench. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1500 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-14 08:42:29 +00:00
DRC
cbcb53617b Fix a bug in the AltiVec downsampling routines uncovered during additional testing with small image sizes. Since the output width is half the input width, the downsampler should only read a second 16-byte chunk if there are more than 8 output columns left. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1499 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-14 08:31:54 +00:00
DRC
ada430bb3d Make the formatting and naming of variables and constants more consistent 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1498 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-13 11:49:15 +00:00
DRC
406bb01ca2 Make the formatting and naming of variables and constants more consistent 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1497 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-13 11:47:20 +00:00
DRC
a6a24c270e Make the formatting and naming of variables and constants more consistent 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1496 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-13 10:00:12 +00:00
DRC
52a4ec6c8a AltiVec SIMD implementation of H2V1 and H2V2 fancy upsampling 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1495 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-13 09:02:29 +00:00
DRC
8f7f49a014 git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1494 632fc199-4ca6-4c93-a231-07263d6284db 2015-01-12 08:36:37 +00:00
DRC
cf78941db4 git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1493 632fc199-4ca6-4c93-a231-07263d6284db 2015-01-12 08:36:25 +00:00
DRC
51eba06011 Minor code readability tweak 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1492 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-11 07:38:35 +00:00
DRC
d71a6e0c25 Use intrinsics for loading aligned data in the IDCT functions. This has no effect on performance, but it makes it more obvious what that code is doing. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1491 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-11 06:34:47 +00:00
DRC
f0abd46c3b Bump copyright year 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1490 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-11 00:58:44 +00:00
DRC
ac4daa7716 AltiVec SIMD implementation of YCC-to-RGB color conversion 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1489 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-10 22:56:26 +00:00
DRC
af69295d3f Fix minor issue in code comments 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1488 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-10 12:25:42 +00:00
DRC
6aed11293d Fix minor issue in code comments 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1487 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-10 12:10:08 +00:00
DRC
a5005751a3 Simplify the code somewhat. It actually wasn't necessary to have a "fast path" and a "medium path"-- they perform the same. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1486 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-10 12:09:11 +00:00
DRC
25347882ed Overhaul the AltiVec vector loading code in the compression-side colorspace conversion routines. The existing code was sometimes overreading the source buffer (at least according to valgrind), and it was necessary to increase the complexity of the code in order to prevent this without significantly compromising performance. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1485 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-10 11:32:36 +00:00
DRC
8de75d0f57 Fix minor issue in code comments 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1484 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-08 10:42:54 +00:00
DRC
22048207ea AltiVec SIMD implementation of 2x1 and 2x2 downsampling 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1483 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-08 06:18:33 +00:00
DRC
2b223a034b Oops. Delete the duplicate copy of [lib]turbojpeg.dll in the binary directory when uninstalling the package. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1482 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-07 05:47:08 +00:00
DRC
c4930d8b0d Oops. Delete the duplicate copy of [lib]turbojpeg.dll in the binary directory when uninstalling the package. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1477 632fc199-4ca6-4c93-a231-07263d6284db
 2015-01-07 01:19:49 +00:00
DRC
577ecd93f1 AltiVec SIMD implementation of sample conversion and integer quantization 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1474 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-23 04:14:54 +00:00
DRC
ff30c63934 Document the fact that the AltiVec implementation uses the same modified algorithms as the SSE2 implementation 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1473 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-23 02:42:59 +00:00
DRC
45453085e7 Use intrinsics for loading/storing data in the DCT/IDCT functions. This has no effect on the performance of the aligned loads/stores, but it makes it more obvious what that code is doing. Using intrinsics for the unaligned stores in the inverse DCT functions increases overall decompression performance by 1-2%. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1472 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 16:04:17 +00:00
DRC
b1fec4ff98 AltiVec SIMD implementation of RGB-to-Grayscale color conversion 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1471 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 14:10:33 +00:00
DRC
5976e42550 Remove unneeded code; Make sure jccolor-altivec.o will be rebuilt if jccolext-altivec.c changes. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1470 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 13:57:30 +00:00
DRC
62bae204f4 AltiVec SIMD implementation of RGB-to-YCC color conversion 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1469 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 13:42:26 +00:00
DRC
8163aad6cc Make test a phony target so things don't go haywire if there is a file named test.c in the current directory. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1468 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 13:41:18 +00:00
DRC
99f125ec07 Maintain the traditional order of the regression tests while allowing the TurboJPEG and libjpeg portions to be executed separately 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1467 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 13:15:08 +00:00
DRC
13af139624 Make comments more consistent 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1466 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 01:38:01 +00:00
DRC
87fd253bd0 Add a "quicktest" pseudo-target, for those times when you just don't want to sit through 11 iterations of TJUnitTest. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1465 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 01:32:51 +00:00
DRC
bf8a5feb79 Cosmetic tweaks to the PowerPC SIMD stubs 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1464 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 01:10:11 +00:00
DRC
535674b1b8 Split AltiVec algorithms into separate files for ease of maintenance; Rename constants using lowercase so they are not confused with macros 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1463 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-22 01:00:42 +00:00
DRC
c9da78525b Optimizations to the AltiVec DCT algorithms (pre-compute constants and combine multiply/add operations) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1462 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-20 03:32:59 +00:00
DRC
0691162a8b AltiVec SIMD implementation of slow integer inverse DCT 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1461 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-20 01:17:39 +00:00
DRC
9cb418d221 Use macros to allocate constants statically, rather than reading them from a table using vec_splat*(). This improves code readability and probably improves performance a bit as well. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1460 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-20 01:16:26 +00:00
DRC
935d1d6398 Swap the order of the IFAST and ISLOW FDCT functions so that it matches the order of the prototypes in jsimd.h and the stubs in jsimd_powerpc.c. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1459 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-20 01:14:38 +00:00
DRC
86ae5913b1 Include ARMv8 binaries when generating a combined OS X/iOS package using 'make iosdmg' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1458 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 18:28:00 +00:00
DRC
d51e6c2f6b Document that the ARMv8/iOS issues are now fixed 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1454 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 18:18:46 +00:00
DRC
6842c7c023 Remove reference to install.txt, which we do not include from the IJG distribution 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1453 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 18:07:04 +00:00
DRC
6e6b28c3ce Include ARMv8 binaries when generating a combined OS X/iOS package using 'make iosdmg' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1452 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 17:34:30 +00:00
DRC
b9c4b58ab2 In the output of the configure script, indicate whether gas-preprocessor.pl is being used along with the assembler. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1451 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 15:40:21 +00:00
DRC
62999d7708 Modify the ARM64 assembly file so that it uses only syntax that the clang assembler in XCode 5.x can understand. These changes should all be cosmetic in nature-- they do not change the meaning or readability of the code nor the ability to build it for Linux. Actually, the code is now more in compliance with the ARM64 programming manual. In addition to these changes, there were a couple of instructions that clang simply doesn't support, so gas-preprocessor.pl was modified so that it now converts those into equivalent instructions that clang can handle. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1450 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 15:36:39 +00:00
DRC
ceb552a9c9 Add iOS architectures to the shared libraries generated by the Mac/iOS packaging system. I have no idea how useful this is for "standard" iOS application development, but it is useful in a jailbreak environment, and iOS 8 supposedly allows shared libs in "official" apps as well. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1447 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 10:44:09 +00:00
DRC
e59196dbdf 1.4.0 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1446 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-19 09:35:11 +00:00
DRC
6cb7f40a18 AltiVec SIMD implementation of fast integer inverse DCT 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1445 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-18 10:12:29 +00:00
DRC
040435afb9 Further cleanup of the AltiVec forward DCT code: 
-- Use macros to represent the fast FDCT constants, to facilitate comparing the AltiVec implementation of the algorithm with the SSE2 implementation.
-- Rename slow FDCT constants for consistency.
-- Use vec_sra() in all cases in the slow FDCT code.  The SSE2 implementation uses psraw, which is an arithmetic shift, so we need to do likewise with AltiVec.  Using vec_sr() hasn't caused any problems yet, but it is conceivable that it might cause different behavior in certain corner cases.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1444 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-18 09:49:39 +00:00
DRC
fb0c394037 AltiVec SIMD implementation of slow integer forward DCT; Clean up fast integer forward DCT code so that it is easier to see how it derives from the SSE2 code and to make it play more nicely with the slow FDCT code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1443 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-17 08:04:39 +00:00
DRC
e1ac40104c Fix cosmetic issues in AltiVec comments 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1442 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-17 08:00:29 +00:00
DRC
3f764b7253 Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1441 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-14 11:47:49 +00:00
DRC
1e2f49619e Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1440 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-14 11:47:08 +00:00
DRC
4c773cff16 Fix typos in test names 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1439 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-08 23:23:41 +00:00
DRC
a29d6b4113 Remove unused code 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1437 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-01 20:13:12 +00:00
DRC
b329697ded Fix build when INPUT_SMOOTHING_SUPPORTED is undefined 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1435 632fc199-4ca6-4c93-a231-07263d6284db
 2014-12-01 19:54:15 +00:00
DRC
2a6b8316fc Some software also needs the FAR macro. Ugh. Also wordsmithing. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1432 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-25 10:07:43 +00:00
DRC
e2dd3e3e5c Restore the JPP() and JMETHOD() macros. Even though libjpeg-turbo doesn't use them anymore, other software apparently does: 
https://bugzilla.redhat.com/show_bug.cgi?id=1164815
https://bugs.kde.org/show_bug.cgi?id=340944
https://bugzilla.mozilla.org/show_bug.cgi?id=1093615


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1430 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-25 09:48:15 +00:00
DRC
0f4469c52f Oops. Include the tjPlane*() functions in the mapfile so that they are exposed in the shared library on ELF systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1429 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-22 23:56:26 +00:00
DRC
bb383b4175 Fix Huffman local buffer overrun discovered by Debian developers when attempting to transform a junk image using ImageMagick: 
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=768369


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1427 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-22 22:24:41 +00:00
DRC
402a715f82 Fix Huffman local buffer overrun discovered by Debian developers when attempting to transform a junk image using ImageMagick: 
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=768369


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1426 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-22 22:09:30 +00:00
DRC
306add8b78 Fix whitespace issues introduced with previous commit. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1423 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-22 04:25:04 +00:00
DRC
9665f5e3f9 Print the library version and exit whenever -version is passed to cjpeg, djpeg, or jpegtran. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1422 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-22 04:04:38 +00:00
DRC
ef263e3e83 Make TJCompressor.close() and TJDecompressor.close() idempotent 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1420 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-21 15:35:33 +00:00
DRC
0426cd3441 Sometimes the sampling factors in grayscale images can be > 1 (for instance, if compressing using 'cjpeg -sample 2x2 -grayscale'.) Technically, sampling factors have no meaning with grayscale JPEGs, and the libjpeg decompressor ignores them in that case. Thus, the TurboJPEG decompressor should ignore them as well. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1419 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-21 15:33:19 +00:00
DRC
ea1eea4742 Sometimes the sampling factors in grayscale images can be > 1 (for instance, if compressing using 'cjpeg -sample 2x2 -grayscale'.) Technically, sampling factors have no meaning with grayscale JPEGs, and the libjpeg decompressor ignores them in that case. Thus, the TurboJPEG decompressor should ignore them as well. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1418 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-19 00:55:28 +00:00
DRC
3ebcf7cf86 Make TJCompressor.close() and TJDecompressor.close() idempotent 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1416 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-18 21:45:34 +00:00
DRC
803b5d24a8 Uses clz and bsr instructions for bit counting on ARM64 platforms as well. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1414 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-18 15:56:43 +00:00
DRC
eca0637c81 Remove trailing spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1412 632fc199-4ca6-4c93-a231-07263d6284db
 2014-11-06 09:32:38 +00:00
DRC
55620c6ef2 Another oops. tjBufSizeYUV2() should return -1 if width < 1. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1410 632fc199-4ca6-4c93-a231-07263d6284db
 2014-10-23 19:08:14 +00:00
DRC
2240974d5d Oops. tjPlaneSizeYUV() should return -1 if componentID > 0 and subsamp==TJSAMP_GRAY. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1408 632fc199-4ca6-4c93-a231-07263d6284db
 2014-10-23 18:54:42 +00:00
DRC
7affbfc241 The AltiVec code actually works on 32-bit PowerPC platforms as well, so change the "powerpc64" token to "powerpc". Also clean up the shift code, which wasn't building properly on OS X. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1406 632fc199-4ca6-4c93-a231-07263d6284db
 2014-09-05 07:23:12 +00:00
DRC
cd2d8e1cc7 AltiVec SIMD implementation of fast forward DCT 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1405 632fc199-4ca6-4c93-a231-07263d6284db
 2014-09-05 06:33:42 +00:00
DRC
f72f1f2e94 Bump version to 1.5 alpha1 to prepare for new features 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1404 632fc199-4ca6-4c93-a231-07263d6284db
 2014-09-04 18:51:31 +00:00
DRC
bbd9b71171 When building libjpeg-turbo on Un*x systems, INT32 is usually typedef'ed to long, not int, so we need to specify an int pointer when doing a 4-byte write to the RGB565 output buffer. On little endian systems, this doesn't matter, but when you write a 32-bit int to a 64-bit long pointer address on a big endian system, you are writing to the upper 4 bytes, not the lower 4 bytes. NOTE: this will probably break on big endian systems that use 16-bit ints (are there any of those still around?) 
This patch also removes an unneeded macro from jdmerge.c.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1403 632fc199-4ca6-4c93-a231-07263d6284db
 2014-09-04 17:35:22 +00:00
DRC
c0a8256a92 When building libjpeg-turbo on Un*x systems, INT32 is usually typedef'ed to long, not int, so we need to specify an int pointer when doing a 4-byte write to the RGB565 output buffer. On little endian systems, this doesn't matter, but when you write a 32-bit int to a 64-bit long pointer address on a big endian system, you are writing to the upper 4 bytes, not the lower 4 bytes. NOTE: this will probably break on big endian systems that use 16-bit ints (are there any of those still around?) 
This patch also removes an unneeded macro from jdmerge.c.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1402 632fc199-4ca6-4c93-a231-07263d6284db
 2014-09-04 17:28:28 +00:00
DRC
1d4c51a0ac Fix Windows build 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1401 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-30 22:01:05 +00:00
DRC
72a3cc0ecd Fix issues with RGB565 color conversion on big endian machines. The RGB565 routines are now abstracted in a separate file, with separate little-endian and big-endian versions defined at compile time through the use of macros (this is similar to how the colorspace extension routines work.) This allows big-endian machines to take advantage of the same performance optimizations as little-endian machines, and it retains the performance on little-endian machines, since the conditional branch for endianness is at a very coarse-grained level. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1399 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-30 20:37:50 +00:00
DRC
339589f3cd Fix build on OS X PowerPC platforms 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1397 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-30 13:55:08 +00:00
DRC
eb8d096ba6 Fix build on OS X PowerPC platforms 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1396 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-30 13:52:09 +00:00
DRC
fe77fa22d9 Oops. Forgot to alter the version header in the change log to indicate the release of 1.4 beta. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1394 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-30 13:48:45 +00:00
DRC
88b6c97568 Create 1.4.x branch 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.4.x@1391 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-29 02:39:35 +00:00
DRC
0a9a252654 Rename the ARM64 assembly file to match the C file 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1390 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-29 01:53:17 +00:00
DRC
de26249a99 Fix several mathematical issues discovered in the ARM64 NEON code while running the extended regression tests introduced in r1267. Specific comments can be found in the original patches: 
https://sourceforge.net/p/libjpeg-turbo/patches/64/


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1389 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-29 01:49:59 +00:00
DRC
a6efae1488 Reformat code per Siarhei's original patch (to clearly indicate that the offset instructions are completely independent) and add Siarhei as an individual author (he no longer works for Nokia.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1388 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-25 15:26:09 +00:00
DRC
e947139c7c Clarify forward compatibility of iOS/ARM builds 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1387 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-23 17:48:17 +00:00
DRC
bdc7650b9e ARM64 NEON SIMD support for YCC-to-RGB565 conversion 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1386 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-23 15:57:38 +00:00
DRC
d729f4da9c ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code: 
-----

aee36252be.patch

From aee36252be20054afce371a92406fc66ba6627b5 Mon Sep 17 00:00:00 2001
From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Date: Wed, 13 Aug 2014 03:50:22 +0300
Subject: [PATCH] ARM: Faster NEON yuv->rgb conversion for Krait and Cortex-A15

The older code was developed and tested only on ARM Cortex-A8 and ARM Cortex-A9.
Tuning it for newer ARM processors can introduce some speed-up (up to 20%).

The performance of the inner loop (conversion of 8 pixels) improves from
~27 cycles down to ~22 cycles on Qualcomm Krait 300, and from ~20 cycles
down to ~18 cycles on ARM Cortex-A15.

The performance remains exactly the same on ARM Cortex-A7 (~58 cycles),
ARM Cortex-A8 (~25 cycles) and ARM Cortex-A9 (~30 cycles) processors.

Also use larger indentation in the source code for separating two independent
instruction streams.

-----

a5efdbf22c.patch

From a5efdbf22ce9c1acd4b14a353cec863c2c57557e Mon Sep 17 00:00:00 2001
From: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Date: Wed, 13 Aug 2014 07:23:09 +0300
Subject: [PATCH] ARM: NEON optimized yuv->rgb565 conversion

The performance of the inner loop (conversion of 8 pixels):
* ARM Cortex-A7:  ~55 cycles
* ARM Cortex-A8:  ~28 cycles
* ARM Cortex-A9:  ~32 cycles
* ARM Cortex-A15: ~20 cycles
* Qualcomm Krait: ~24 cycles

Based on the Linaro rgb565 patch from
    https://sourceforge.net/p/libjpeg-turbo/patches/24/
but implements better instructions scheduling.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1385 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-23 15:47:51 +00:00
DRC
eb66974f3a Ensure that tjFree() is used for any JPEG buffers that might have been dynamically allocated by the compress/transform functions. To keep things simple, we use tjAlloc() for the statically-allocated buffer as well, so that tjFree() can always be used to free the buffer, regardless of whether it was allocated by tjbench or by the TurboJPEG library. This fixes crashes that occurred on Windows when running tjunittest or tjbench with the -alloc flag. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1384 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 19:59:51 +00:00
DRC
f5644c3498 Ensure that tjFree() is used for any JPEG buffers that might have been dynamically allocated by the compress/transform functions. To keep things simple, we use tjAlloc() for the statically-allocated buffer as well, so that tjFree() can always be used to free the buffer, regardless of whether it was allocated by tjbench or by the TurboJPEG library. This fixes crashes that occurred on Windows when running tjunittest or tjbench with the -alloc flag. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1383 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 19:27:28 +00:00
DRC
55e328ecb8 Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1382 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 18:30:44 +00:00
DRC
3d5189891b Don't use sudo when building a Debian package unless the user is non-root 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1381 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 17:21:09 +00:00
DRC
bdb36e1a14 Windows doesn't have setenv(). Go, go Gadget Macros. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1380 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 15:39:32 +00:00
DRC
022a9016df 1.4 beta1 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1379 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 14:22:00 +00:00
DRC
e408761dda Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1378 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 14:19:12 +00:00
DRC
9b012bd026 Don't use sudo when building a Debian package unless the user is non-root 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1377 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 14:15:08 +00:00
DRC
0713c1bb54 Add a set of undocumented environment variables and Java system properties that allow compression features of libjpeg that are not normally exposed in the TurboJPEG API to be enabled. These features are not normally exposed because, for the most part, they aren't "turbo" features, but it is still useful to be able to benchmark them without modifying the code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1376 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 13:43:33 +00:00
DRC
2e2ce5a1da .func/.endfunc are only necessary when generating STABS debug info, which basically went out of style with parachute pants and Rick Astley. At any rate, none of the platforms for which we're building the ARM code use it (DWARF is the common format these days), and the .func/.endfunc directives cause the clang integrated assembler to fail (http://llvm.org/bugs/show_bug.cgi?id=20424). 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1375 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 11:31:46 +00:00
DRC
684ace1924 Extend tjbenchtest so that it tests the dynamic JPEG buffer allocation feature in TurboJPEG. Disable the tiling feature in TJBench whenever dynamic buffer allocation is enabled (because the tiling feature requires a separate buffer for each tile, using it successfully with dynamic buffer allocation would require a separate TurboJPEG compressor instance for each tile, and it's not worth going to that trouble right now.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1374 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 03:04:06 +00:00
DRC
d92949b0ac Run the TurboJPEG conformance tests out of a directory in /tmp (for improved performance, if the source directory is on a remote file share.) Fix an issue in TJBench.java that prevented it from working properly if the source image resided in a directory with a dot in the name. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1373 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 03:00:37 +00:00
DRC
43513893f0 Extend tjbenchtest so that it tests the dynamic JPEG buffer allocation feature in TurboJPEG. Disable the tiling feature in TJBench whenever dynamic buffer allocation is enabled (because the tiling feature requires a separate buffer for each tile, using it successfully with dynamic buffer allocation would require a separate TurboJPEG compressor instance for each tile, and it's not worth going to that trouble right now.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1372 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 02:57:34 +00:00
DRC
a1a920cc51 Run the TurboJPEG conformance tests out of a directory in /tmp (for improved performance, if the source directory is on a remote file share.) Fix an issue in TJBench.java that prevented it from working properly if the source image resided in a directory with a dot in the name. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1371 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-22 02:51:16 +00:00
DRC
88b90bdc07 Oops 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1370 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-21 22:16:25 +00:00
DRC
cce13c767e Subtle point, but dest->outbuffer is a pointer to the address of the JPEG buffer, which is stored in the calling program. Thus, *(dest->outbuffer) will always equal *outbuffer. We need to compare *outbuffer with dest->buffer instead to determine if the pointer is being reused. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1369 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-21 22:15:19 +00:00
DRC
fe80ec2275 If the output buffer in the TurboJPEG destination manager was allocated by the destination manager and is being reused from a previous compression operation, then we need to get the buffer size from the previous operation, since the calling program doesn't know the actual buffer size. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1368 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-21 15:51:47 +00:00
DRC
2261e1e408 Actually, we need to increase the size of BUFSIZE, not just the size of _buffer. The previous patch might have cause problems if, for instance, state->free_in_buffer was 127 but 129 bytes were compressed. In that case, only 127 of the 129 bytes would have been written to the file. Also document the fix. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1367 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-21 03:40:37 +00:00
DRC
eddc355d18 Actually, we need to increase the size of BUFSIZE, not just the size of _buffer. The previous patch might have cause problems if, for instance, state->free_in_buffer was 127 but 129 bytes were compressed. In that case, only 127 of the 129 bytes would have been written to the file. Also document the fix. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1366 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-21 03:38:14 +00:00
DRC
29823fa9a6 Fix an extremely rare crash that can occur when compressing a very high-frequency MCU using quality 100 and no subsampling, and when dynamically allocating the JPEG buffer in the destination manager. Even with a test program designed specifically to reproduce the crash, it only occurred once in about 25 million iterations. More details here: https://sourceforge.net/p/libjpeg-turbo/bugs/64 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1365 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-21 01:55:22 +00:00
DRC
9c168ad23b Fix an extremely rare crash that can occur when compressing a very high-frequency MCU using quality 100 and no subsampling, and when dynamically allocating the JPEG buffer in the destination manager. Even with a test program designed specifically to reproduce the crash, it only occurred once in about 25 million iterations. More details here: https://sourceforge.net/p/libjpeg-turbo/bugs/64 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1364 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-21 01:53:47 +00:00
DRC
f6d7b7768b Wordsmithing & clarifications 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1363 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-20 16:02:49 +00:00
DRC
bc3c1685a7 Document the existence of the new ARM64 SIMD code 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1362 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-20 15:40:43 +00:00
DRC
19224b2252 Properly detect the need for gas-preprocessor.pl when building for ARM64 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1361 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-20 13:14:46 +00:00
DRC
40dd3146cd Refactored YUVImage Java class so that it supports both unified YUV image buffers as well as separate YUV image planes; modified the JNI functions accordingly and added new helper functions to the TurboJPEG C API (tjPlaneWidth(), tjPlaneHeight(), tjPlaneSizeYUV()) to facilitate those modifications; changed potentially confusing "component width" and "component height" terms to "plane width" and "plane height" and modified variable names in turbojpeg.c to reflect this; numerous other documentation tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1360 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-17 12:23:49 +00:00
DRC
5d87f6ddff Make the wrapped functions static 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1359 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 16:40:56 +00:00
DRC
d2a7495012 Make the wrapped functions static 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1358 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 16:40:34 +00:00
DRC
b7c8c86d6a Whitespace formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1357 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 16:20:59 +00:00
DRC
e31e49478c Allow the int pixel versions of the various TurboJPEG JNI functions to share the same code as the byte pixel versions. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1356 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 16:20:06 +00:00
DRC
80cb26444a Whitespace formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1355 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 16:08:12 +00:00
DRC
a4940d1396 Add descriptions to help sort out which function goes with which version of the API. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1354 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 16:07:15 +00:00
DRC
32760451fe Add descriptions to help sort out which function goes with which version of the API. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1353 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 15:40:02 +00:00
DRC
fa8bcb825c Compiler warnings 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1352 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 14:44:09 +00:00
DRC
580f391537 Fix build broken by r1349 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1351 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 14:40:36 +00:00
DRC
46a0392cf3 Compiler warnings 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1350 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 14:40:05 +00:00
DRC
26dd86bd89 Restore backward compatibility between libjpeg-turbo 1.3.x JAR and the new JNI library 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1349 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 14:01:21 +00:00
DRC
927a10db05 Allow the int pixel versions of the various TurboJPEG JNI functions to share the same code as the byte pixel versions. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1348 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-15 13:18:58 +00:00
DRC
cdcac99f6d Clean up exception handling in the JNI code. The exception is actually not thrown until the function exits, so we can let the code fall through to bailout: if the TurboJPEG C function fails. Also, per the JNI spec, no other JNI functions can be called between GetPrimitiveArrayCritical() and ReleasePrimitiveArrayCritical(). This hasn't caused any problems thus far, but better safe than sorry. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1347 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-14 17:24:01 +00:00
DRC
8951cf01fe Clean up exception handling in the JNI code. The exception is actually not thrown until the function exits, so we can let the code fall through to bailout: if the TurboJPEG C function fails. Also, per the JNI spec, no other JNI functions can be called between GetPrimitiveArrayCritical() and ReleasePrimitiveArrayCritical(). This hasn't caused any problems thus far, but better safe than sorry. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1346 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-14 16:54:04 +00:00
DRC
f7c11051de Oops. Parameter name is "strides", not "stride" 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1345 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-12 15:52:51 +00:00
DRC
9d77dad4c9 Reformat TurboJPEG C API documentation to improve ease of maintenance and to make it more consistent with the javadoc formatting; fix minor error in tjCompressFromYUV() prototype. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1344 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-12 15:06:30 +00:00
DRC
aecea388c7 Extend the TurboJPEG C API to support handling YUV images stored in separate image planes instead of a unified buffer 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1343 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-11 18:05:41 +00:00
DRC
493be61707 Clean up and consolidate notes regarding the YUV image format. This also corrects a factual error regarding the padding of the luminance plane-- because we now support 4:1:1, the component width is not necessarily padded to the nearest multiple of 2 if horizontal subsampling is used. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1342 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-10 20:12:17 +00:00
DRC
779bd68d20 Clean up notes using the doxygen @note command 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1341 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-10 18:30:52 +00:00
DRC
d13df21341 Clean up notes using the doxygen @note command 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1340 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-10 17:25:51 +00:00
DRC
c71ab2f7c2 Make the documentation more readable by displaying fixed-width text (which is used to refer to variables and functions) in a different color. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1339 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-10 16:43:31 +00:00
DRC
983503eddf Fix a display issue in the documentation for tjDecompress2() (doxygen treats a star at the beginning of the line as a list bullet); make the documentation more readable by displaying fixed-width text (which is used to refer to variables and functions) in a different color. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1338 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-10 16:39:32 +00:00
DRC
aee4f72160 12-bit JPEG support 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1337 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-09 23:06:07 +00:00
DRC
8a74848a23 Oops. The Windows version of collect_args/uncollect_args uses rsp, so we still need the rsp prologue/epilogue, despite the fact that we aren't using the stack as a work area. This fixes a segfault on Windows caused by r1335. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1336 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-09 22:58:18 +00:00
DRC
a8ab3424c7 Attempt to improve performance by refactoring the compression-side color conversion and DCT algorithms so that they take full advantage of the additional registers available with 64-bit SSE2. This produces a somewhat yawn-worthy speedup of 2-3%, but at least the code is a lot more readable now. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1335 632fc199-4ca6-4c93-a231-07263d6284db
 2014-08-09 14:30:28 +00:00
DRC
3728aa01d8 Fix performance and other issues uncovered in testing with actual ARM64 hardware; formatting tweaks; remove NEON platform check (NEON is always available with ARMv8) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1333 632fc199-4ca6-4c93-a231-07263d6284db
 2014-07-23 14:14:14 +00:00
DRC
821455542c Include "Installed-Size" field in the deb-control file to prevent Ubuntu from complaining 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1330 632fc199-4ca6-4c93-a231-07263d6284db
 2014-07-17 08:25:32 +00:00
DRC
d762c19b98 Include "Installed-Size" field in the deb-control file to prevent Ubuntu from complaining 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1329 632fc199-4ca6-4c93-a231-07263d6284db
 2014-07-17 08:24:58 +00:00
DRC
2472bc7119 Add proper support for Borland compilers (Borland needs section names to be prefixed with an underscore, and it needs OMF object files.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1328 632fc199-4ca6-4c93-a231-07263d6284db
 2014-06-22 21:14:39 +00:00
DRC
a81f542726 Big oops. wrjpgcom on Windows was being built using the rdjpgcom source. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1327 632fc199-4ca6-4c93-a231-07263d6284db
 2014-06-22 20:50:14 +00:00
DRC
3da10338c6 Big oops. wrjpgcom on Windows was being built using the rdjpgcom source. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1326 632fc199-4ca6-4c93-a231-07263d6284db
 2014-06-22 20:48:38 +00:00
DRC
73821bff78 Big oops. wrjpgcom on Windows was being built using the rdjpgcom source. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1325 632fc199-4ca6-4c93-a231-07263d6284db
 2014-06-22 20:46:48 +00:00
DRC
23843313eb Prevent a buffer overrun if the comment begins with a literal quote character and the string exceeds 65k characters. Also prevent comments longer than 65k characters from being written, since this will produce an incorrect JPEG file. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1324 632fc199-4ca6-4c93-a231-07263d6284db
 2014-06-22 20:38:54 +00:00
DRC
b7d6e84d6a Prevent a buffer overrun if the comment begins with a literal quote character and the string exceeds 65k characters. Also prevent comments longer than 65k characters from being written, since this will produce an incorrect JPEG file. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1323 632fc199-4ca6-4c93-a231-07263d6284db
 2014-06-22 20:36:50 +00:00
DRC
a8fb48b528 Remove VMS-specific code 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1322 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-29 19:31:45 +00:00
DRC
88c7e30045 Our copyright string is longer than JMSG_LENGTH_MAX, and this was causing a buffer overrun if output_message() was called with msg_code set to JMSG_COPYRIGHT, or if format_message() was called with msg_code set to JMSG_COPYRIGHT and with a buffer of length JMSG_LENGTH_MAX. 
We can't simply increase JMSG_LENGTH_MAX, because it is part of the libjpeg API, and it is generally assumed that a buffer of this length will be passed to format_message().  Thus, the easiest solution is simply to use a shorter copyright string for JMSG_COPYRIGHT.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1320 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-28 20:28:30 +00:00
DRC
d7a25595ce Our copyright string is longer than JMSG_LENGTH_MAX, and this was causing a buffer overrun if output_message() was called with msg_code set to JMSG_COPYRIGHT, or if format_message() was called with msg_code set to JMSG_COPYRIGHT and with a buffer of length JMSG_LENGTH_MAX. 
We can't simply increase JMSG_LENGTH_MAX, because it is part of the libjpeg API, and it is generally assumed that a buffer of this length will be passed to format_message().  Thus, the easiest solution is simply to use a shorter copyright string for JMSG_COPYRIGHT.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1319 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-28 20:27:42 +00:00
DRC
cf55f0b533 Our copyright string is longer than JMSG_LENGTH_MAX, and this was causing a buffer overrun if output_message() was called with msg_code set to JMSG_COPYRIGHT, or if format_message() was called with msg_code set to JMSG_COPYRIGHT and with a buffer of length JMSG_LENGTH_MAX. 
We can't simply increase JMSG_LENGTH_MAX, because it is part of the libjpeg API, and it is generally assumed that a buffer of this length will be passed to format_message().  Thus, the easiest solution is simply to use a shorter copyright string for JMSG_COPYRIGHT.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1318 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-28 20:19:54 +00:00
DRC
fced14c7b4 We don't support non-ANSI C compilers 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1317 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-21 04:13:09 +00:00
DRC
495e43426e Allow for building the MIPS DSPr2 extensions if the host is mips-* as well as mipsel-*. The DSPr2 extensions are little endian, so we still have to check that the compiler defines __MIPSEL__ before enabling them. This paves the way for supporting big-endian MIPS, and in the near term, it allows the SIMD extensions to be built with Sourcery CodeBench. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1316 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-19 19:13:22 +00:00
DRC
5ef463056a SIMD-accelerated int upsample routine for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1315 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-18 20:04:47 +00:00
DRC
c728cfd8f2 Fix MIPS build 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1314 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-18 19:36:05 +00:00
DRC
5de454b291 libjpeg-turbo has never supported non-ANSI compilers, so get rid of the crufty SIZEOF() macro. It was not being used consistently anyhow, so it would not have been possible to build prior releases of libjpeg-turbo using the broken compilers for which that macro was designed. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1313 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-18 19:04:03 +00:00
DRC
5033f3e19a Remove MS-DOS code and information, and adjust copyright headers to reflect the removal of features in r1307 and r1308. libjpeg-turbo has never supported MS-DOS, nor is it even possible for us to do so. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1312 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-18 18:33:44 +00:00
DRC
7f4a81b769 Further copyright header cleanup 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1311 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-18 18:17:01 +00:00
DRC
da13af6b8d Further copyright header cleanup 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1310 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-18 17:52:06 +00:00
DRC
d88f7ddfbe Further copyright header cleanup 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1309 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-18 17:51:00 +00:00
DRC
bc56b754e1 Get rid of the HAVE_PROTOTYPES configuration option, as well as the related JMETHOD and JPP macros. libjpeg-turbo has never supported compilers that don't handle prototypes. Doing so requires ansi2knr, which isn't even supported in the IJG code anymore. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1308 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-16 10:43:44 +00:00
DRC
52ded87680 Remove all of the NEED_SHORT_EXTERNAL_NAMES stuff. There is scant information available as to which linkers ever had a 15-character global symbol name limit. AFAICT, it might have been a VMS and/or a.out BSD thing, but none of those platforms have ever been supported by libjpeg-turbo (nor are such systems supported by other open source libraries of this nature.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1307 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-15 20:30:16 +00:00
DRC
64086281b3 Clean up code formatting in the SIMD interface functions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1306 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-15 19:46:48 +00:00
DRC
1419852c42 Clean up code formatting in the SIMD interface functions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1305 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-15 19:45:11 +00:00
DRC
1b3fd7eead SIMD-accelerated NULL convert routine for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1304 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-15 18:26:01 +00:00
DRC
a3c3bbc2f4 Fix build, which was broken by the checkin of the MIPS DSPr2 accelerated smooth downsampling routine. Until/unless other platforms include SIMD support for that function, it's just easier to #ifdef around it rather than adding stubs for the other platforms. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1303 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-15 18:22:24 +00:00
DRC
0bf325b8ba Fix error in MIPS DSPr2 accelerated smooth downsample routine 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1302 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-15 17:10:39 +00:00
DRC
6a61c1e6dc SIMD-accelerated h2v2 smooth downsampling routine for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1301 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-14 15:00:10 +00:00
DRC
1e9cbbad8a Minor tweak to improve code readability 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1300 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-14 14:57:43 +00:00
DRC
3b489c3af7 Minor tweak to improve code readability 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1299 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-14 14:57:01 +00:00
DRC
976fd9687e The x86/x86-64 SIMD extensions were originally designed to accommodate changing the value of RGB_*, but this apparently broke when RGB-to-gray colorspace conversion was accelerated. Further, the ARM NEON extensions have always assumed that JCS_RGB behaves identically to JCS_EXT_RGB. Rather than fix these issues, it makes more sense to just stop claiming that we support changing the values of RGB_*, since doing so is no longer necessary. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1298 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-13 18:41:33 +00:00
DRC
b844eaa360 SIMD-accelerated merged upsampling routines for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1297 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-13 18:40:14 +00:00
DRC
3402a66a22 The x86/x86-64 SIMD extensions were originally designed to accommodate changing the value of RGB_*, but this apparently broke when RGB-to-gray colorspace conversion was accelerated. Further, the ARM NEON extensions have always assumed that JCS_RGB behaves identically to JCS_EXT_RGB. Rather than fix these issues, it makes more sense to just stop claiming that we support changing the values of RGB_*, since doing so is no longer necessary. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1296 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-13 18:38:36 +00:00
DRC
78df2e6115 Add support for decompressing to RGB565 (16-bit) pixels 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1295 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-12 09:23:57 +00:00
DRC
6e8220eddc Document -rgb option in djpeg man page; "gray-scale"="grayscale" 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1294 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-12 09:09:40 +00:00
DRC
90d6c3824b Document -rgb option in djpeg man page; "gray-scale"="grayscale" 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1293 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-12 09:08:39 +00:00
DRC
2a9f0cf36c Use 2-space indentation for the enums, to be consistent with the structs 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1292 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-12 00:34:58 +00:00
DRC
333e9187c8 Use 2-space indentation for the enums, to be consistent with the structs 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1291 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-12 00:34:08 +00:00
DRC
e3cb4eb05d Document the fact that the fast integer FDCT is not fully accelerated for quality levels above 97 + additional wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1290 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-11 23:15:52 +00:00
DRC
05524e671e Document the fact that the fast integer FDCT is not fully accelerated for quality levels above 97 + additional wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1289 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-11 23:14:43 +00:00
DRC
715bb41ead Port the more accurate (and slightly faster) floating point IDCT implementation from jpeg-8a and later. New research revealed that the SSE/SSE2 floating point IDCT implementation was actually more accurate than the jpeg-6b implementation, not less, which is why its mathematical results have always differed from those of the jpeg-6b implementation. This patch brings the accuracy of the C code in line with that of the SSE/SSE2 code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1288 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-11 10:09:07 +00:00
DRC
a758460175 Provide a more thorough description of the trade-offs between the various DCT/IDCT algorithms, based on new resarch 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1287 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-11 09:48:11 +00:00
DRC
8940e6ca86 Provide a more thorough description of the trade-offs between the various DCT/IDCT algorithms, based on new resarch 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1286 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-11 09:46:28 +00:00
DRC
b775351012 Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1285 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-11 09:36:25 +00:00
DRC
e47364ac56 Modify Windows build system to take into account new assembly file names 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1283 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-10 10:10:03 +00:00
DRC
24e92e9fc0 Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1282 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-10 09:53:34 +00:00
DRC
72130be99f Re-organize the x86/x86-64 SIMD routines into separate folders by instruction set so we can name each routine similarly to its corresponding C file. This also makes it easier to add support for new instruction sets. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1280 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-09 20:14:26 +00:00
DRC
1a45b81fa2 Remove trailing spaces (+ one additional tab in TJUnitTest.java that was missed in the previous commit) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1279 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-09 18:06:58 +00:00
DRC
e5eaf37440 Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1278 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-09 18:00:32 +00:00
DRC
771886c192 Fix an error in the MIPS DSPr2 fancy upsampling routine 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1277 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-09 14:45:55 +00:00
DRC
a32b3eca99 Fix regression that caused 'make test' to fail with non-x86 SIMD code. The round-off error in the SIMD float DCT/IDCT routines only exists in the SSE and SSE2 implementations. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1276 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-07 06:02:57 +00:00
DRC
29d30cb855 Shared the rm commands to reduce as much output noise as possible 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1275 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 22:49:02 +00:00
DRC
35db75ea3c Redesign the libjpeg regression tests so that they fully cover all of the SIMD-accelerated algorithms (and most of the other ones as well) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1274 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 22:44:46 +00:00
DRC
393bac6de4 Android build instructions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1273 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 21:59:31 +00:00
DRC
b0a9cca1e3 Replace our custom version of Android.mk with instructions on how to build a libjpeg-turbo SDK for Android using autotools. Upon consulting with AOSP, it appears that Android.mk isn't really necessary except when building libjpeg-turbo for use by the Android platform itself, and it makes more sense for them to maintain the makefile for that purpose rather than for it to be upstreamed. ndk-build has serious limitations that prevent it from being used to generate static libjpeg-turbo libraries (mainly, it isn't possible to combine pre-built objects from one module into a static library for another module, which is necessary because the SIMD extensions sometimes have to be built with different CFLAGS than the rest of the code.) In general, it's just better not to introduce a new build system. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1272 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 21:03:35 +00:00
DRC
425c5a57cf Wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1271 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 20:56:01 +00:00
DRC
dab6b8a1a3 Wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1270 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 20:53:25 +00:00
DRC
343478622d SIMD-accelerated slow integer IDCT routine for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1269 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 09:53:21 +00:00
DRC
f57b8a6357 Phrasing. Boom. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1268 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 09:41:08 +00:00
DRC
66129dc660 Redesign the libjpeg regression tests so that they fully cover all of the SIMD-accelerated algorithms (and most of the other ones as well) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1267 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-06 08:58:11 +00:00
DRC
06296e80c9 First pass at an Android makefile 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1265 632fc199-4ca6-4c93-a231-07263d6284db
 2014-05-05 20:55:24 +00:00
DRC
61976bd8a9 We use __CHAR_UNSIGNED__ (automatically defined by the AC_C_CHAR_UNSIGNED macro) rather than CHAR_IS_UNSIGNED (defined by custom autoconf code in libjpeg that we didn't port over), although I doubt it matters on any of the platforms we support. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1264 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 19:13:10 +00:00
DRC
4dae78f498 We use __CHAR_UNSIGNED__ (automatically defined by the AC_C_CHAR_UNSIGNED macro) rather than CHAR_IS_UNSIGNED (defined by custom autoconf code in libjpeg that we didn't port over), although I doubt it matters on any of the platforms we support. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1263 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 19:11:52 +00:00
DRC
230d09dbed Fix crashes and bogus output in the CMYK and decode-to-YUV features that occurred if JCS_EXTENSIONS wasn't defined. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1260 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 09:42:49 +00:00
DRC
6887f05d19 Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1259 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 09:23:01 +00:00
DRC
ff6961f3d2 This patch accomplishes the following: 
-- Auto-generates HAVE_LOCALE_H macro and adds it to jconfig.h (this is used by rdjpgcom.c.)
-- Reconciles the description and ordering of macros between config.h.in and jconfig.h.in, so the two files can be easily diffed.
-- Eliminates the use of the autoheader-generated config.h in the project and moves relevant internal-only macros into a new file, jconfigint.h.  This is to avoid "already defined" warnings in files that were including both config.h (to get the internal autotools package information or the INLINE definition) and jconfig.h.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1258 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 09:17:11 +00:00
DRC
714839d402 This patch accomplishes the following: 
-- Auto-generates HAVE_LOCALE_H macro and adds it to jconfig.h (this is used by rdjpgcom.c.)
-- Reconciles the description and ordering of macros between config.h.in and jconfig.h.in, so the two files can be easily diffed.
-- Eliminates the use of the autoheader-generated config.h in the project and moves relevant internal-only macros into a new file, jconfigint.h.  This is to avoid "already defined" warnings in files that were including both config.h (to get the internal autotools package information or the INLINE definition) and jconfig.h.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1257 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 09:13:37 +00:00
DRC
beb0b33764 Work around an issue in Visual C++ 2010 and 2013 that was causing the 256-bit bitmap test in the regression tests to fail. More specifically, when optimization is enabled in these versions of Visual C++, the optimizer seems to get confused by the following code block: 
delta = cur0 * 2;
       cur0 += delta;          /* form error * 3 */
       errorptr[0] = (FSERROR) (bpreverr0 + cur0);
       cur0 += delta;          /* form error * 5 */
       bpreverr0 = belowerr0 + cur0;
       cur0 += delta;          /* form error * 7 */

Each time cur0 is incremented by delta, the compiled code doubles the value of delta (WTF?!)  Thus, by the time the end of the block is reached, cur0 is equal to 15 times its former self, not 7 times its former self as it should be.  At any rate, it was a lot simpler to just refactor the code so that it uses multiplication.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1255 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 07:36:33 +00:00
DRC
b1398cba43 Prevent svn:mergeinfo from being modified on Makefile.am and simd/jsimd*.c every time a merge is done. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1254 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 07:35:16 +00:00
DRC
ac9a92ebbd Work around an issue in Visual C++ 2010 and 2013 that was causing the 256-bit bitmap test in the regression tests to fail. More specifically, when optimization is enabled in these versions of Visual C++, the optimizer seems to get confused by the following code block: 
delta = cur0 * 2;
       cur0 += delta;          /* form error * 3 */
       errorptr[0] = (FSERROR) (bpreverr0 + cur0);
       cur0 += delta;          /* form error * 5 */
       bpreverr0 = belowerr0 + cur0;
       cur0 += delta;          /* form error * 7 */

Each time cur0 is incremented by delta, the compiled code doubles the value of delta (WTF?!)  Thus, by the time the end of the block is reached, cur0 is equal to 15 times its former self, not 7 times its former self as it should be.  At any rate, it was a lot simpler to just refactor the code so that it uses multiplication.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1253 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 07:22:21 +00:00
DRC
06fa20d407 1.3.2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1252 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 07:20:31 +00:00
DRC
0816d086b5 Work around an issue in Visual C++ 2010 and 2013 that was causing the 256-bit bitmap test in the regression tests to fail. More specifically, when optimization is enabled in these versions of Visual C++, the optimizer seems to get confused by the following code block: 
delta = cur0 * 2;
       cur0 += delta;          /* form error * 3 */
       errorptr[0] = (FSERROR) (bpreverr0 + cur0);
       cur0 += delta;          /* form error * 5 */
       bpreverr0 = belowerr0 + cur0;
       cur0 += delta;          /* form error * 7 */

Each time cur0 is incremented by delta, the compiled code doubles the value of delta (WTF?!)  Thus, by the time the end of the block is reached, cur0 is equal to 15 times its former self, not 7 times its former self as it should be.  At any rate, it was a lot simpler to just refactor the code so that it uses multiplication.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1251 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-20 06:57:52 +00:00
DRC
fe9c907b45 Minor comment correction (we support the full range of IDCT scaling factors now.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1250 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-18 07:58:29 +00:00
DRC
d76ba910e9 Minor comment correction (we support the full range of IDCT scaling factors now.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1249 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-18 07:57:48 +00:00
DRC
d0c9f0cffd Clarify how to do a 64-bit build using the Visual Studio IDE 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1248 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-18 07:50:17 +00:00
DRC
8666f4f94c Clarify how to do a 64-bit build using the Visual Studio IDE 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1247 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-18 07:49:29 +00:00
DRC
4d2ff7dad7 Update Windows build instructions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1246 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-18 02:46:59 +00:00
DRC
9e5b681195 Update Windows build instructions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1245 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-17 20:05:03 +00:00
DRC
0c989d9e90 Fix warnings about unused variables when building with GCC 4.8.x 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1242 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-17 00:47:18 +00:00
DRC
4186162665 Fix warnings about unused variables when building with GCC 4.8.x 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1241 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-16 23:38:37 +00:00
DRC
c2caad07bc Fix compiler warning ("always_inline function might not be inlinable") when building with recent versions of GCC; Unix EOL 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1240 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-16 23:37:23 +00:00
DRC
72a8ca0d8e Fix compiler warning ("always_inline function might not be inlinable") when building with recent versions of GCC; Unix EOL 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1239 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-16 23:32:58 +00:00
DRC
9fe22dac31 Set the BUILD environment variable properly when building with MinGW implementations that lack a Unix shell (TDM-GCC, for instance); Only set CMP0022 if it is supported (older CMake implementations don't support it); Remove trailing spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1238 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-16 23:30:38 +00:00
DRC
ffb2b6e200 Set the BUILD environment variable properly when building with MinGW implementations that lack a Unix shell (TDM-GCC, for instance); Only set CMP0022 if it is supported (older CMake implementations don't support it); Remove trailing spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1237 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-16 23:29:38 +00:00
DRC
9a341f803f Remove trailing spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1236 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-15 03:43:44 +00:00
DRC
241ad88b7d Remove trailing spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1235 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-15 03:42:40 +00:00
DRC
990342cd57 wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1234 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-15 03:41:31 +00:00
DRC
fdd625efa5 wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1233 632fc199-4ca6-4c93-a231-07263d6284db
 2014-04-15 03:07:44 +00:00
DRC
ef9a4e05ba Integrate a slightly modified version of Mozilla's patch for precomputing the bit-counting LUT. This is useful if the table needs to be shared among multiple processes, although the primary reason for doing that is reduced footprint on mobile devices, which are probably already covered by the clz intrinsic code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1221 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-28 18:50:30 +00:00
DRC
0cfc4c17b7 Use clz/bsr instructions on ARM for bit counting rather than the lookup table (reduces memory footprint and can improve performance in some cases.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1220 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-28 18:33:25 +00:00
DRC
51d6bb30cf Modify svn:ignore so that it lists only files generated in-tree by autoreconf -fiv. It's pretty much impossible to maintain an up-to-date list of files generated by the actual build, so we'll just assume that the user will do an out-of-tree build if they want to avoid cluttering up their 'svn status' display. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1219 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-27 20:47:39 +00:00
DRC
8bad4251a9 Modify svn:ignore so that it lists only files generated in-tree by autoreconf -fiv. It's pretty much impossible to maintain an up-to-date list of files generated by the actual build, so we'll just assume that the user will do an out-of-tree build if they want to avoid cluttering up their 'svn status' display. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1218 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-27 20:43:57 +00:00
DRC
26c6606772 Make iOS build instructions more generic and applicable to all versions of Xcode; modify iOS build procedure for Xcode 5.0 and later to fix a build issue with Xcode 5.1. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1217 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-27 03:36:04 +00:00
DRC
0d0705f445 Make iOS build instructions more generic and applicable to all versions of Xcode; modify iOS build procedure for Xcode 5.0 and later to fix a build issue with Xcode 5.1. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1216 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-27 03:35:21 +00:00
DRC
377955e606 Update build instructions to reflect the use of pkgbuild/productbuild 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1215 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-25 05:27:16 +00:00
DRC
79241e3415 Remove any claims of support for OS X 10.4 "Tiger" (the packaging system overhaul produces packages that require Leopard or later, and I haven't been able to test Tiger for years anyhow.) Update TurboJPEG shared library version. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1213 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-23 18:06:11 +00:00
DRC
b1068fa2da Migrate Mac packaging system to pkgbuild, since PackageMaker is no longer supported. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1212 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-23 17:53:07 +00:00
DRC
832b1fc5d3 Remove the sections about replacing libjpeg at run time and compile time. These were written before O/S distributions started shipping libjpeg-turbo, and they are either pedantic or no longer relevant. Also remove any text that assumes the use of our official project binaries. Notes specific to the official binaries have been moved into the project wiki. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1210 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-23 15:21:20 +00:00
DRC
6f92ff617a Fix Windows build 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1206 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-22 23:03:03 +00:00
DRC
f67c04c05e Since we're now maintaining our own Cygwin pseudo-repository directories instead of recommending that users install these packages from a local source, it makes more sense to name the packages according to Cygwin specs, so they can be copied as-is into the pseudo-repository. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1204 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-22 20:51:38 +00:00
DRC
de23dd8068 git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1203 632fc199-4ca6-4c93-a231-07263d6284db 2014-03-22 20:43:03 +00:00
DRC
c8b0226d91 git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1202 632fc199-4ca6-4c93-a231-07263d6284db 2014-03-22 20:42:01 +00:00
DRC
79df67debb Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1201 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-22 20:22:52 +00:00
DRC
7a9faaefb4 Since we're now maintaining our own Cygwin pseudo-repository directories instead of recommending that users install these packages from a local source, it makes more sense to name the packages according to Cygwin specs, so they can be copied as-is into the pseudo-repository. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1195 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 23:34:53 +00:00
DRC
d794360250 RHEL 6 (and probably other platforms as well) sets _defaultdocdir=%{_datadir}/doc, which screws things up, since we're overriding _datadir. Since we intend _defaultdocdir to be /usr/share/doc, just be explicit about it. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1194 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 11:01:00 +00:00
DRC
3064cf7410 RHEL 6 (and probably other platforms as well) sets _defaultdocdir=%{_datadir}/doc, which screws things up, since we're overriding _datadir. Since we intend _defaultdocdir to be /usr/share/doc, just be explicit about it. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1193 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 11:00:00 +00:00
DRC
fc9995e4c9 Prevent svn:mergeinfo from being modified on Makefile.am and simd/jsimd*.c every time a merge is done. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1192 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 09:35:53 +00:00
DRC
2b03fe2710 Fix compiler warning about unused function when building with the libjpeg v6b API/ABI 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1191 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 09:35:02 +00:00
DRC
17882fd8cc Prevent svn:mergeinfo from being modified on Makefile.am and simd/jsimd*.c every time a merge is done. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1190 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 09:33:49 +00:00
DRC
506a742193 Fix compiler warning about unused function when building with the libjpeg v6b API/ABI 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1189 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 09:29:28 +00:00
DRC
b52f3e69cb Fix compiler warning ("always_inline function might not be inlinable") when building with recent versions of GCC 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1188 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 09:23:41 +00:00
DRC
ad64b5a4c9 Fix compiler warning ("always_inline function might not be inlinable") when building with recent versions of GCC 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1187 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 09:22:21 +00:00
DRC
3c8238322f Enable silent build (can be overridden with 'make V=1') if the version of autotools being used is new enough. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1186 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 08:36:58 +00:00
DRC
c7e10b21e8 Enable silent build (can be overridden with 'make V=1') if the version of autotools being used is new enough. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1185 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-21 08:36:06 +00:00
DRC
7a6ed075ea Extend YUVImage class to allow reuse of the same buffer with different metadata; port TJBench changes that treat YUV encoding/decoding as an intermediate step of the JPEG compression/decompression pipeline rather than a separate test case; add YUV encode/decode tests to the Java version of tjbenchtest 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1184 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-17 11:14:52 +00:00
DRC
dd5fcdd007 formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1183 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-17 10:40:10 +00:00
DRC
6e11d6899c Fix an error that occurred when trying to use the lossless transform feature without specifying -quiet; formatting tweak 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1182 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-17 10:19:42 +00:00
DRC
2ae7918a8e Fix an error that occurred when trying to use the lossless transform feature without specifying -quiet; formatting tweak 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1181 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-17 10:14:18 +00:00
DRC
4dafea685d Move the garbage collection of the JPEG tiles into the decompression function to increase the chances that tiled decompression of large images will succeed without an OutOfMemoryError. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1180 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-17 10:13:17 +00:00
DRC
88f260c78c Move the garbage collection of the JPEG tiles into the decompression function to increase the chances that tiled decompression of large images will succeed without an OutOfMemoryError. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1179 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-17 10:12:11 +00:00
DRC
6ffed933d7 Generate the Java documentation using javadoc 7, to improve readability. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1178 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-16 23:12:25 +00:00
DRC
ee44371925 This should have been checked in with the previous commit. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1177 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-16 22:59:51 +00:00
DRC
fc26b6577a Extend the YUV decode functionality to the TurboJPEG Java API, and port the TJUnitTest modifications that treat YUV encoding/decoding as an intermediate step of the JPEG compression/decompression pipeline rather than a separate test case; Add the ability to encode YUV images from an arbitrary position in a large image buffer; Significantly refactor the handling of YUV images; numerous doc tweaks; other Java API cleanup and usability improvements 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1176 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-16 22:56:26 +00:00
DRC
40a0a023fa Update (C) year 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1175 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-16 19:33:23 +00:00
DRC
695b6e8680 Don't use deprecated constructor 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1174 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-16 19:33:07 +00:00
DRC
aa255e2946 Doc tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1173 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-16 18:43:42 +00:00
DRC
bcb5f02392 Go ahead and deprecate the old constructor in 1.3.1 instead of in 1.4, since it uses a deprecated method 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1172 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-16 18:00:59 +00:00
DRC
c33347c0aa Add @Deprecated to the deprecated Java methods, so javac will actually print deprecation warnings, as opposed to just listing the methods as deprecated in javadoc; remove the use of the deprecated methods by our own test programs. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1171 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-15 13:25:11 +00:00
DRC
1909c59bad As with tjDecompressToYUV*(), tjCompressFromYUV() also conditionally uses an intermediate buffer if the source image dimensions do not fall on MCU boundaries. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1170 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-15 08:48:53 +00:00
DRC
12c29c9a7f Remove unneeded/unused code 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1169 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-14 08:59:27 +00:00
DRC
b14813947e Streamline the BufferedImage functionality in the compressor so that it works the same way as compressing a "normal" image, and deprecate the old BufferedImage methods and other redundant methods. Eliminate the use of deprecated features in the test programs. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1168 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-14 08:53:33 +00:00
DRC
d772f9ac45 Remove benchmarks. They were originally intended as a way of measuring overhead for small compress/decompress operations, but using TJBench with a small image is a better way to accomplish that. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1167 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-14 04:32:03 +00:00
DRC
4f7b7b339c Formatting tweak 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1166 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-14 04:27:03 +00:00
DRC
78b227e251 Oops. This code should not have been removed. It is necessary for generating the error images. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1165 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-14 04:15:43 +00:00
DRC
b53f410228 Actually, the issue with nightshot_iso_100 is unrelated to the image size. Reducing the size to 128x95, the same size as vgl_6548_0026, does not eliminate the problem. The issue seems to always occur when decompression scaling is enabled. It is unclear at this point whether this is a bug or expected behavior, but the pixels generated by the split decompression functions appear correct. They are just slightly different (but not visibly so) from the pixels generated by the monolithic decompression function. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1164 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-13 21:19:12 +00:00
DRC
823fbed414 Add a mode to tjbenchtest for testing the YUV encoding/decoding functions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1163 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-13 20:48:38 +00:00
DRC
ce6891f048 If we have transformed a 4:2:2 or 4:4:0 image in any way that transposes the horizontal and vertical dimensions, then we need to inform the decompression function that the subsampling type has changed. Otherwise, tjDecodeYUV() will not produce correct results. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1162 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-13 20:33:43 +00:00
DRC
f9baac9585 Whitespace tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1161 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-13 08:32:20 +00:00
DRC
df42b3cdf5 Whitespace tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1160 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-13 08:32:11 +00:00
DRC
adf5551ba9 Execute warmup runs with tjTransform() as well 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1159 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-12 07:17:23 +00:00
DRC
e1efc8a0ef Fix a couple of output formatting issues 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1158 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-12 07:16:17 +00:00
DRC
95e4cb2060 Since we now have a complete set of YUV functions, TJBench can be greatly simplified. It now tests YUV encoding/decoding as an intermediate step of JPEG compression/decompression, which eliminates the need for a separate YUV mode. Several other things have been streamlined in the process. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1157 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-12 06:51:39 +00:00
DRC
0e9bf6442b Fix a segfault that would occur in decompress-only mode if -alloc was specified without -tile. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1156 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-12 06:17:12 +00:00
DRC
dd59233dd4 Fix a segfault that would occur in decompress-only mode if -alloc was specified without -tile. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1155 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-12 06:15:51 +00:00
DRC
a15f19f2d2 Wordsmithing & formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1154 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-11 09:46:50 +00:00
DRC
d4b453c26e Back-port the -subsamp option from 1.4 rather than use the hackish approach of replacing 4:2:2 with 4:4:0. This has the added advantage of allowing the user to test only a specific level of subsampling. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1153 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-11 08:28:47 +00:00
DRC
db0e2791e0 Oops. This was apparently the victim of an overly aggressive search/replace. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1152 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-11 08:25:59 +00:00
DRC
aa367580e8 Silence warning in CMake 2.8.12 and later 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1151 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-11 06:31:09 +00:00
DRC
5eb1efa3d2 Silence warning in CMake 2.8.12 and later 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1150 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-11 06:30:21 +00:00
DRC
3bf21e05e1 Fix the build of the Java classes when using MSVC 2010 and later. Something in the recesses of my brain is telling me that I tried this before and it failed under some circumstances, but it must have been a bug in an older CMake implementation. CMake 2.8.8 and later seem to work fine with this patch. This patch also updates the minimum required version to 2.8.8, because 2.8.8 fixed another issue that was preventing the SIMD code from building under MSVC 2010 and later. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1149 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-11 06:24:46 +00:00
DRC
d45c54992b Fix the build of the Java classes when using MSVC 2010 and later. Something in the recesses of my brain is telling me that I tried this before and it failed under some circumstances, but it must have been a bug in an older CMake implementation. CMake 2.8.8 and later seem to work fine with this patch. This patch also updates the minimum required version to 2.8.8, because 2.8.8 fixed another issue that was preventing the SIMD code from building under MSVC 2010 and later. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1148 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-11 06:21:46 +00:00
DRC
05d24e826d Fix Windows build 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1147 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-10 21:38:11 +00:00
DRC
42aeac3ee2 Formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1146 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-10 21:37:54 +00:00
DRC
7d9f758e52 For now, punt on trying to support fancy upsampling in tjDecodeYUV(). Fancy upsampling requires context rows and other refinements, which are difficult to implement correctly with the algorithm we're using. Longer-term, supporting fancy upsampling would probably require using the main buffer that libjpeg allocates. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1145 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-10 20:14:53 +00:00
DRC
15c0876191 Fix additional uninitialized values reported by valgrind 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1144 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-10 20:11:56 +00:00
DRC
c90144950f When tjDecodeYUV() is used with a "fresh" decompressor instance (one that hasn't been previously used to decompress a JPEG image), then it needs comps_in_scan, data_precision, and the quantization tables to be defined. This patch also extends TJUnitTest to check for this error. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1143 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-10 09:34:04 +00:00
DRC
20e158dcb7 Silence valgrind false positives about uninitialized values. Even with this patch, valgrind still complains about uninitialized values when decompressing or decoding to a buffer with an alpha-enabled colorspace. Not sure why this happens, but it occurs in libjpeg-turbo 1.3 as well, and only when the x86/x86-64 SIMD code is being used. It is my belief that these remaining warnings are also false positives, because if the output buffer is memset to all 0's prior to invoking tjDecodeYUV()/tjDecompress(), no errors are reported. If any of the alpha channel bits were in fact not being initialized, then they would still be 0 after invoking tjDecodeYUV()/tjDecompress(), and TJUnitTest would report an error. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1142 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-08 20:50:35 +00:00
DRC
f27f38b02d Add a blank line before the alpha-enabled colorspace tests in order to improve readability 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1141 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-08 20:32:37 +00:00
DRC
4798b7e806 Add a blank line before the alpha-enabled colorspace tests in order to improve readability 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1140 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-08 20:31:31 +00:00
DRC
2bdc0425df Go ahead and call jinit_master_decompress() rather than trying to reproduce its functionality. That function does a few things that we were missing, including allocating the range limit table used by the plain C color conversion code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1139 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-07 03:52:57 +00:00
DRC
4d82ddb0c9 Oops. We need to call start_pass() on the color converter in order to allocate the conversion tables used by the plain C code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1138 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-06 20:07:03 +00:00
DRC
50cfc464b8 Oops. We need to call start_pass() on the color converter in order to allocate the conversion tables used by the plain C code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1137 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-06 20:03:37 +00:00
DRC
84c25cbec9 Oops. We need to call start_pass() on the color converter in order to allocate the conversion tables used by the plain C code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1136 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-06 19:51:29 +00:00
DRC
ea657b2f74 Fix regression introduced in r1128 that caused SIMD detection to malfunction for ARM platforms (and probably ARM64 and MIPS as well.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1135 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-06 09:29:25 +00:00
DRC
f9c2dd2684 Fix regression introduced in r1122 that caused SIMD detection to malfunction for ARM platforms (and probably ARM64 and MIPS as well.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1134 632fc199-4ca6-4c93-a231-07263d6284db
 2014-03-06 09:26:49 +00:00
DRC
895fd6d0d3 Fix unitialized value reported by valgrind (the upsampling routine used by 4:4:0 and 4:1:1 reads the value of component_index.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1133 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 09:35:34 +00:00
DRC
34dca05227 Implement a YUV decode function in the TurboJPEG API, to be symmetric with tjEncodeYUV(). 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1132 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 09:17:14 +00:00
DRC
2bdadb44a7 Remove benchmarks. They were originally intended as a way of measuring overhead for small compress/decompress operations, but using TJBench with a small image is a better way to accomplish that. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1131 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 09:06:42 +00:00
DRC
54918b37fc Remove unused code (the destination manager is not used during YUV encoding, there are no virtual arrays to realize, and jinit_c_prep_controller() is unnecessary because we are not using smoothing.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1130 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 05:34:02 +00:00
DRC
e2ce3b5eb0 Remove unused code (the destination manager is not used during YUV encoding, there are no virtual arrays to realize, and jinit_c_prep_controller() is unnecessary because we are not using smoothing.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1129 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 05:27:55 +00:00
DRC
ffa5e59218 Fix autoconf warnings 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1128 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 05:26:24 +00:00
DRC
5aec4afc62 Use C-style comments 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1127 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 05:23:26 +00:00
DRC
c7a32466a6 Remove unused code (the destination manager is not used during YUV encoding, there are no virtual arrays to realize, and jinit_c_prep_controller() is unnecessary because we are not using smoothing.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1126 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-28 05:19:43 +00:00
DRC
006bc58dd6 Use C-style comments 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1125 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-27 21:22:54 +00:00
DRC
6f75a351a3 Oops 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1124 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-20 19:33:44 +00:00
DRC
cccfdcb8ab Older versions of automake don't support AM_PROG_AR, so only execute that macro if it exists. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1123 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-15 07:14:58 +00:00
DRC
c56cb476f6 Fix autoconf warnings 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1122 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-15 07:02:04 +00:00
DRC
693f4a5600 Fix an issue that prevented tjEncodeYUV2() and TJCompressor.encodeYUV() from working properly if the source image was very tiny. Basically, jpeg_start_compress() was attempting to write the JPEG headers, which was overrunning the YUV buffer. This patch removes the call to jpeg_start_compress() in tjEncodeYUV2() and replaces it with calls to the individual routines that are necessary to initialize the color converter and downsampler. TJUnitTest has also been modified to test for this condition (the buffer size regression test now works in YUV mode.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1121 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-11 10:16:42 +00:00
DRC
2c0c807fcc Fix an issue that prevented tjEncodeYUV2() and TJCompressor.encodeYUV() from working properly if the source image was very tiny. Basically, jpeg_start_compress() was attempting to write the JPEG headers, which was overrunning the YUV buffer. This patch removes the call to jpeg_start_compress() in tjEncodeYUV2() and replaces it with calls to the individual routines that are necessary to initialize the color converter and downsampler. TJUnitTest has also been modified to test for this condition (the buffer size regression test now works in YUV mode.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1120 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-11 09:56:12 +00:00
DRC
ad2f618f0b Update copyright year in file header as well 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1119 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-11 09:55:32 +00:00
DRC
38c9970b95 Fix an issue that prevented tjEncodeYUV3() and TJCompressor.encodeYUV() from working properly if the source image was very tiny. Basically, jpeg_start_compress() was attempting to write the JPEG headers, which was overrunning the YUV buffer. This patch removes the call to jpeg_start_compress() in tjEncodeYUV3() and replaces it with calls to the individual routines that are necessary to initialize the color converter and downsampler. TJUnitTest has also been modified to test for this condition (the buffer size regression test now works in YUV mode.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1118 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-11 09:45:18 +00:00
DRC
68550a7e99 Update copyright notice to reflect recent SIMD contributions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1117 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-09 14:12:12 +00:00
DRC
2885cf5830 Further examination of the code reveals that this change is unnecessary. The histogram stores a count of each color in the image, so it will always contain at least one non-zero element, and thus the total can never be zero. Since the histogram is generated from the image data and not read from the header, there is no chance that header corruption would affect it. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1116 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-07 19:06:03 +00:00
DRC
d9712ed14b Further examination of the code reveals that this change is unnecessary. The histogram stores a count of each color in the image, so it will always contain at least one non-zero element, and thus the total can never be zero. Since the histogram is generated from the image data and not read from the header, there is no chance that header corruption would affect it. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1115 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-07 19:05:07 +00:00
DRC
d4ab63d191 Fix several potential overflow issues identified by the community. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1114 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-06 19:31:50 +00:00
DRC
88dee5863a Formatting tweak 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1113 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-06 19:31:23 +00:00
DRC
e26c687b21 Fix several potential overflow issues identified by the community. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1112 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-06 19:30:32 +00:00
DRC
e189ec7a48 Remove trailing space 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1111 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-06 19:15:03 +00:00
DRC
9397469012 Remove trailing space 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1110 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-06 19:13:24 +00:00
DRC
2d07ee519d Create a separate stub file for 64-bit ARM, since it currently implements only the decompression-related functions. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1109 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-05 19:03:41 +00:00
DRC
ba55b2cdfe First pass at ARMv8 64-bit NEON SIMD support 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1108 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-05 08:15:44 +00:00
DRC
3e00f03aea Formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1107 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-05 07:40:00 +00:00
DRC
edc846f4fe Formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1106 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-05 07:39:38 +00:00
DRC
cc0733ad78 Remove trailing spaces 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1105 632fc199-4ca6-4c93-a231-07263d6284db
 2014-02-01 06:17:31 +00:00
DRC
a113506d17 Some motion JPEG implementations generate "abbreviated JPEG streams" (JPEG images without the default tables included) for some or all of the video frames, in order to save space. When these are encountered, it is generally expected that they will be decompressed using the default Huffman tables, so libjpeg-turbo now does this unless the tables have been explicitly specified by an application. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1104 632fc199-4ca6-4c93-a231-07263d6284db
 2014-01-31 17:22:15 +00:00
DRC
8d55c88cda Include instructions for building iOS binaries using Xcode 4.6.x and Xcode 5.0. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1102 632fc199-4ca6-4c93-a231-07263d6284db
 2014-01-29 19:32:23 +00:00
DRC
a2f06448c8 Include instructions for building iOS binaries using Xcode 4.6.x and Xcode 5.0. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1101 632fc199-4ca6-4c93-a231-07263d6284db
 2014-01-29 19:31:09 +00:00
DRC
7db5273ea7 Per the conventions of the image compression and digital video communities, use "YCbCr" to describe the JPEG colorspace and "YUV" to describe an image format consisting of Y, Cb, and Cr planes (this partially reverts r960.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1093 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-25 21:12:23 +00:00
DRC
b3a028e356 Per the conventions of the image compression and digital video communities, use "YCbCr" to describe the JPEG colorspace and "YUV" to describe an image format consisting of Y, Cb, and Cr planes (this partially reverts r959.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1092 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-25 21:08:47 +00:00
DRC
5a7e9e5baa Per the conventions of the image compression and digital video communities, use "YCbCr" to describe the JPEG colorspace and "YUV" to describe an image format consisting of Y, Cb, and Cr planes (this partially reverts r959.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1091 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-25 20:30:12 +00:00
DRC
43d8cf4d45 Fix CVE-2013-6629 and CVE-2013-6630 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1090 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-21 18:34:39 +00:00
DRC
7ebf2941a9 Fix CVE-2013-6629 and CVE-2013-6630 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1089 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-21 18:32:48 +00:00
DRC
9f9436ae23 Fix CVE-2013-6629 and CVE-2013-6630 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1088 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-21 18:31:08 +00:00
DRC
cb92dccf0d Make documentation viewable directly from http://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1086 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-19 02:08:23 +00:00
DRC
b10aafb889 Make documentation viewable directly from http://svn.code.sf.net/p/libjpeg-turbo/code/trunk 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1085 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-19 01:59:05 +00:00
DRC
62eeefcb3d Make documentation viewable directly from http://svn.code.sf.net/p/libjpeg-turbo/code/trunk 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1084 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-19 01:53:13 +00:00
DRC
e163653f99 Back-port code from jpeg-8 that removes unpopulated (and unneeded) tables for AC and DC coefficients when generating progressive JPEG files with arithmetic coding. This should make such files bitwise compatible with jpeg-8, barring any other mathematical differences (such as the different subsampling algorithm used in jpeg-8.) Add regression tests for progressive+arithmetic JPEG files. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1082 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-06 07:45:39 +00:00
DRC
c44750e50e Fix an issue that resulted in an error ("Invalid SOS parameters for sequential JPEG. Didn't expect more than one scan.") when decoding progressive+arithmetic JPEGs generated by libjpeg-turbo. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1081 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-06 07:37:01 +00:00
DRC
4b509280ce Back-port code from jpeg-8 that removes unpopulated (and unneeded) tables for AC and DC coefficients when generating progressive JPEG files with arithmetic coding. This should make such files bitwise compatible with jpeg-8, barring any other mathematical differences listed in README-turbo.txt. Add regression tests for progressive+arithmetic JPEG files. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1080 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-06 06:55:28 +00:00
DRC
5430aa1863 Back-port code from jpeg-8 that removes unpopulated (and unneeded) tables for AC and DC coefficients when generating progressive JPEG files with arithmetic coding. This should make such files bitwise compatible with jpeg-8, barring any other mathematical differences listed in README-turbo.txt. Add regression tests for progressive+arithmetic JPEG files. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1079 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-06 06:50:38 +00:00
DRC
4ac8700537 Remove unnecessary whitespace 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1078 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-06 06:02:26 +00:00
DRC
5aa6c9a553 Remove unnecessary whitespace 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1077 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-06 05:58:38 +00:00
DRC
dbbef06227 Remove unnecessary whitespace 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1076 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-06 05:51:03 +00:00
DRC
2e8ff4b084 Add the ability to test scaling when decompressing to YUV; compression from YUV to JPEG; and YUV padding. Replace clunky -411 and -440 parameters with a -subsamp parameter that allows any of the subsampling options to be tested in isolation. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1075 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-05 19:53:12 +00:00
DRC
c6501f7f5f Add the ability to test scaling when decompressing to YUV; compression from YUV to JPEG; and YUV padding. Replace clunky -411 and -440 parameters with a -subsamp parameter that allows any of the subsampling options to be tested in isolation. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1074 632fc199-4ca6-4c93-a231-07263d6284db
 2013-11-04 23:07:54 +00:00
DRC
19eeaa7908 Make environment variable syntax consistent between ARM and x86 code, and add an option to disable SIMD on x86 (this option will be added to the x86-64 code as well, but it makes more sense to add it when we add AVX support.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1073 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-31 07:40:24 +00:00
DRC
07e982d9b4 Deprecate and undocument the FORCE{MMX|SSE|SSE2|SSE3} flags. These were originally introduced in TurboJPEG/IPP as a way to override the automatic CPU selection in the underlying IPP codec, which was closed source. They are not meaningful anymore, since libjpeg-turbo provides environment variables to accomplish the same thing and since it no longer necessarily uses x86 SIMD code behind the scenes. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1072 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-31 07:11:39 +00:00
DRC
1e67274bd7 Extend the TurboJPEG Java API to support compressing JPEG images from YUV planar images 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1071 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-31 05:04:51 +00:00
DRC
faa868bbb6 Add 'tjunittest -yuv -alloc' test on Windows as well 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1070 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-31 05:02:20 +00:00
DRC
b51ee895d8 r1065 broke the build on Windows, because getinstance() defines a variable. Thus, it needs to occur before the array initialization code. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1069 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-31 05:00:19 +00:00
DRC
fe739656f9 Clean up formatting code and rename the JPEG files generated during the YUV decode tests to reflect the fact that they are being generated from YUV source images. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1068 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-31 04:53:27 +00:00
DRC
910a35725c Extend the TurboJPEG C API to support compressing JPEG images from YUV planar images 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1067 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-30 23:02:57 +00:00
DRC
eaa31f52b3 Oops 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1066 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-30 22:21:58 +00:00
DRC
e2f8e694d0 Fix a really subtle issue whereby an invalid free() could occur if a program called tjInitDecompress() and then accidentally passed the handle to tjEncodeYUV3(), or if a program called tjInitCompress() and then accidentally passed the handle to tjDecompressToYUV2(). 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1065 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-30 22:21:06 +00:00
DRC
6cef2b1059 Fix a really subtle issue whereby an invalid free() could occur if a program called tjInitDecompress() and then accidentally passed the handle to tjEncodeYUV2(), or if a program called tjInitCompress() and then accidentally passed the handle to tjDecompressToYUV(). 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1064 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-30 22:12:37 +00:00
DRC
f57a22de55 Fix logic error from r1039 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1063 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-26 00:32:23 +00:00
DRC
596b96623f Fix logic error from r1037 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1062 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-26 00:29:53 +00:00
DRC
c45653e471 Fix a couple of issues with return value checking. JFREAD(), which wraps fread(), will never return -1. fread() will instead return 0 or a short object count if an error occurs, and ferror() will return 1 in that case. The second issue was that we were assigning the return value of ftell() to an unsigned long prior to checking the value, so the value would never be < 0 if an error occurred. It would instead be (unsigned long)-1. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1061 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-12 21:52:48 +00:00
DRC
490c7f955a Fix a couple of issues with return value checking. JFREAD(), which wraps fread(), will never return -1. fread() will instead return 0 or a short object count if an error occurs, and ferror() will return 1 in that case. The second issue was that we were assigning the return value of ftell() to an unsigned long prior to checking the value, so the value would never be < 0 if an error occurred. It would instead be (unsigned long)-1. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1060 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-12 21:51:16 +00:00
DRC
fff6c23a65 SIMD-accelerated integer convsamp routine for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1059 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-12 21:39:20 +00:00
DRC
3d72728169 SIMD-accelerated floating point quantize and convsamp routines for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1058 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-09 18:39:44 +00:00
DRC
d64e23e6f8 adjust DSPr2 performance claims 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1057 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-08 02:32:07 +00:00
DRC
d3131c1b3d SIMD-accelerated fast integer inverse DCT routine for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1056 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-08 02:18:59 +00:00
DRC
71e06a7d81 SIMD-accelerated fast integer forward DCT routine for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1055 632fc199-4ca6-4c93-a231-07263d6284db
 2013-10-08 02:11:21 +00:00
DRC
a6b7fbd352 SIMD-accelerated slow integer forward DCT and quantize routines for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1054 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-30 18:13:27 +00:00
DRC
a6ef282a49 Some of the IJG headers say "Modified by", so clarify that our "Modifications" are not referring to these. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1053 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-28 03:23:49 +00:00
DRC
ecc9560822 Some of the IJG headers say "Modified by", so clarify that our "Modifications" are not referring to these. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1052 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-28 03:22:53 +00:00
DRC
982e2099a4 Actually, the second bug was hidden by the first, so the initial ChangeLog entry was correct from the user's point of view. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1051 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-28 03:11:46 +00:00
DRC
cadabd4239 Actually, the second bug was hidden by the first, so the initial ChangeLog entry was correct from the user's point of view. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1050 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-28 03:10:31 +00:00
DRC
e8be2c612a Fix an issue that resulted in an error ("Invalid SOS parameters for sequential JPEG. Didn't expect more than one scan.") when decoding progressive+arithmetic JPEGs generated by libjpeg-turbo. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1049 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-28 03:04:01 +00:00
DRC
56e017d71a Fix an issue that resulted in an error ("Invalid SOS parameters for sequential JPEG. Didn't expect more than one scan.") when decoding progressive+arithmetic JPEGs generated by libjpeg-turbo. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1048 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-28 03:03:04 +00:00
DRC
e500591710 SIMD-accelerated 3/4 and 3/2 decompression scaling for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1047 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-27 17:51:08 +00:00
DRC
2ccf4d1a70 SIMD-accelerated 1/2 and 1/4 decompression scaling for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1046 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-27 17:43:23 +00:00
DRC
49eaa7572d SIMD-optimized RGB-to-grayscale conversion for MIPS DSPr2 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1045 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-27 17:39:57 +00:00
DRC
7308ffee43 Name the package *cygwin64.tar.bz2 when building on Cygwin64. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1044 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-26 07:29:20 +00:00
DRC
94b6c02d7d Name the package *cygwin64.tar.bz2 when building on Cygwin64. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1043 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-26 07:27:56 +00:00
DRC
922b14b8d8 Fix segfault in MIPS DSPr2 upsample routines that occurred when doing 'make test' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1040 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-25 17:33:37 +00:00
DRC
f369f17f8a Due to the way in which the configure script silently falls back to a non-SIMD build if SIMD can't be enabled, we accidentally released iOS ARM v7 and v7s binaries in 1.3.0 that did not contain NEON SIMD code, because gas-preprocessor.pl wasn't in the PATH. In order to prevent this from happening again, specifying --with-simd now has the effect of forcing a SIMD build, and if this argument is specified, any issues encountered while enabling SIMD are treated as fatal. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1039 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-25 05:24:46 +00:00
DRC
8ca34d4b33 Due to the way in which the configure script silently falls back to a non-SIMD build if SIMD can't be enabled, we accidentally released iOS ARM v7 and v7s binaries in 1.3.0 that did not contain NEON SIMD code, because gas-preprocessor.pl wasn't in the PATH. In order to prevent this from happening again, specifying --with-simd now has the effect of forcing a SIMD build, and if this argument is specified, any issues encountered while enabling SIMD are treated as fatal. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1037 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-25 04:36:44 +00:00
DRC
5d2514b86f We can't enable optimized entropy coding unless we're using Huffman coding. This fixes a bug whereby attempting to create a progressive JPEG with arithmetic coding would fail. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1036 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-24 03:39:51 +00:00
DRC
2c63c003be Clarify that the bug affects cjpeg as well as jpegtran. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1035 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-24 03:38:32 +00:00
DRC
27df2a4c03 Clarify that the bug affects cjpeg as well as jpegtran. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1034 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-24 03:37:29 +00:00
DRC
ba923a8529 Fix I/O suspension. This little nugget of code was introduced in r30 as part of an early attempt to make buffered I/O work with the optimized Huffman codec. Ultimately, r32 reverted a lot of that mess and introduced much of the logic we now use, rendering this code unnecessary, but it was never reverted because it only causes problems when I/O suspension is used, and apparently no one has tried to do that with libjpeg-turbo until now. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@1033 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-24 03:26:47 +00:00
DRC
1370f10326 We can't enable optimized entropy coding unless we're using Huffman coding. This fixes a bug whereby attempting to create a progressive JPEG with arithmetic coding would fail. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1032 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-24 03:21:38 +00:00
DRC
216cc641c9 We can't enable optimized entropy coding unless we're using Huffman coding. This fixes a bug whereby attempting to create a progressive JPEG with arithmetic coding would fail. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1031 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-24 03:18:27 +00:00
DRC
24f11a73f2 The connect.apple.com alias has apparently been down for about a month 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1030 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-23 18:38:20 +00:00
DRC
3a25f7b1d7 The connect.apple.com alias has apparently been down for about a month 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1029 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-23 18:37:34 +00:00
DRC
6eb29ddb6f Oops. We need to delete the new copy of turbojpeg.dll in the binary directory. Also add quotes to InstDir to allow installing under "c:\Program Files\", and remove unnecessary quotes in the Delete directives. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1028 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-20 01:11:40 +00:00
DRC
ae8d0dc35f In the Windows installer packages, place a duplicate copy of turbojpeg.dll in c:\libjpeg-turbo[-gcc][64]\bin. This is mainly to give installers an easy way to find the DLL for the purposes of bundling it. Specifically, this was necessary for TurboVNC, becuase 32-bit CMake running on 64-bit Windows cannot ever access the "real" c:\windows\system32 directory. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1027 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-19 22:57:18 +00:00
DRC
4d877931ab In the Windows installer packages, place a duplicate copy of turbojpeg.dll in c:\libjpeg-turbo[-gcc][64]\bin. This is mainly to give installers an easy way to find the DLL for the purposes of bundling it. Specifically, this was necessary for TurboVNC, becuase 32-bit CMake running on 64-bit Windows cannot ever access the "real" c:\windows\system32 directory. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1026 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-19 22:55:57 +00:00
DRC
7ef26165cc 1.3.1 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1025 632fc199-4ca6-4c93-a231-07263d6284db
 2013-09-19 09:36:03 +00:00
DRC
371b420ecf Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1024 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-23 07:57:21 +00:00
DRC
ce84fc8eed git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1023 632fc199-4ca6-4c93-a231-07263d6284db 2013-08-23 07:46:07 +00:00
DRC
aba7ceda4f Oops. Forgot to implement access method for the colorspace & extend TJBench 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1022 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-23 07:13:59 +00:00
DRC
b2c4745aa3 Wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1021 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-23 06:38:59 +00:00
DRC
38cb1ec2a7 Add CMYK support to the TurboJPEG Java API & clean up a few things in the C API 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1020 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-23 04:45:43 +00:00
DRC
cd7c3e6672 Add CMYK support to the TurboJPEG C API 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1019 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-23 02:49:25 +00:00
DRC
7185b719cc git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1018 632fc199-4ca6-4c93-a231-07263d6284db 2013-08-20 00:17:26 +00:00
DRC
a5830628b9 Add 4:1:1 subsampling support in the TurboJPEG Java API 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1017 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 11:04:21 +00:00
DRC
ae92418cc1 Add note regarding the fact that 4:4:0 lacks full SIMD support; Add an option for benchmarking 4:4:0 subsampling in TJBench; Wordsmithing; Disable timestamp in generated HTML files to make diffing and merging easier 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1016 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 10:47:07 +00:00
DRC
f82b9f968b Add note regarding the fact that 4:4:0 lacks full SIMD support; Add an option for benchmarking 4:4:0 subsampling in TJBench; Wordsmithing; Disable timestamp in generated HTML files to make diffing and merging easier 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1015 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 10:39:30 +00:00
DRC
1f3635c496 Add 4:1:1 subsampling support in the TurboJPEG C API 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1014 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 10:19:00 +00:00
DRC
7bd24b26e0 Disable timestamp in generated HTML files to make diffing and merging easier. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1013 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:38:52 +00:00
DRC
ca866c48f0 Disable timestamp in generated HTML files to make diffing and merging easier. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1012 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:37:48 +00:00
DRC
3b21982b60 Wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1011 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:31:45 +00:00
DRC
7657726d38 Wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1010 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:28:09 +00:00
DRC
d081fd728c Add note regarding the fact that 4:4:0 lacks full SIMD support; Add an option for benchmarking 4:4:0 subsampling in tjbench. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1009 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:15:37 +00:00
DRC
07796da4e5 Add note regarding the fact that 4:4:0 lacks full SIMD support; Add an option for benchmarking 4:4:0 subsampling in tjbench. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1008 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:13:00 +00:00
DRC
bcda6834d6 Upgrade to Doxygen 1.8.3.1; Add note regarding the fact that 4:4:0 lacks full SIMD support. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1007 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:02:42 +00:00
DRC
71ccb39d1e Upgrade to Doxygen 1.8.3.1 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1006 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 09:00:15 +00:00
DRC
a4a48ed06c Upgrade to Doxygen 1.8.3.1 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1005 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-18 08:47:03 +00:00
DRC
1520ee2986 Remove stray closing bracket that prevented the use of this header in a C++ application 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1003 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-12 21:36:10 +00:00
DRC
8cda1c32ec Remove stray closing bracket that prevented the use of this header in a C++ application 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1002 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-12 21:35:46 +00:00
DRC
96573d05b5 By default, install the libraries into /opt/libjpeg-turbo/lib32 on any 32-bit system, not just x86, and into /opt/libjpeg-turbo/lib64 on any 64-bit system, not just x86-64. In particular, this addresses an issue with building TurboVNC and VirtualGL on ARM systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1001 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-11 23:23:41 +00:00
DRC
dadebe97e4 Document previous commit in the change log 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@1000 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-11 23:04:34 +00:00
DRC
c32e0c23c0 By default, install the libraries into /opt/libjpeg-turbo/lib32 on any 32-bit system, not just x86, and into /opt/libjpeg-turbo/lib64 on any 64-bit system, not just x86-64. In particular, this addresses an issue with building TurboVNC and VirtualGL on ARM systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@999 632fc199-4ca6-4c93-a231-07263d6284db
 2013-08-11 22:57:19 +00:00
DRC
16962c1132 SIMD support for performing upsampling using MIPS DSPr2 instructions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@996 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-27 21:50:02 +00:00
DRC
6f2d3c2c97 SIMD support for performing downsampling using MIPS DSPr2 instructions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@995 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-27 21:48:18 +00:00
DRC
86fbf35fb6 SIMD support for performing fancy upsampling using MIPS DSPr2 instructions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@994 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-27 21:44:14 +00:00
DRC
0be9fa5735 SIMD support for performing color conversion using MIPS DSPr2 instructions 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@993 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-24 21:50:20 +00:00
DRC
b92710377b Fix lintian warning about missing maintainer address when installing on recent Debian-based systems 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@992 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-07 04:43:49 +00:00
DRC
822c8507bb Fix lintian warning about missing maintainer address when installing on recent Debian-based systems 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@991 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-07 04:42:56 +00:00
DRC
d3eb40b97a Use ELF64 object format on 64-bit kFreeBSD systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@990 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-03 14:22:09 +00:00
DRC
c8843a0b14 Use ELF64 object format on 64-bit kFreeBSD systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@989 632fc199-4ca6-4c93-a231-07263d6284db
 2013-07-03 14:21:49 +00:00
DRC
6e0bbbf7e6 1.3.0 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@983 632fc199-4ca6-4c93-a231-07263d6284db
 2013-05-10 22:08:53 +00:00
DRC
418fe286c2 Fix incorrect data output and buffer overruns in the new tjDecompressToYUV2() function whenever scaling is used along with a 4:2:0 JPEG image; extend tjunittest and TJUnitTest to test for these issues. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@982 632fc199-4ca6-4c93-a231-07263d6284db
 2013-05-07 21:17:35 +00:00
DRC
b7c41932ed Clean up the output of tjunittest and TJUnitTest 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@981 632fc199-4ca6-4c93-a231-07263d6284db
 2013-05-04 23:41:33 +00:00
DRC
49df783743 Clean up the output of tjunittest and TJUnitTest 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@980 632fc199-4ca6-4c93-a231-07263d6284db
 2013-05-04 23:31:32 +00:00
DRC
fca3e72600 Make sure the RPM provides "libjpeg-turbo" as well, for backward compatibility (the TurboVNC RPM build, in particular, checks for this.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@979 632fc199-4ca6-4c93-a231-07263d6284db
 2013-05-04 04:48:27 +00:00
DRC
04e0a0293a Make sure the RPM provides "libjpeg-turbo" as well, for backward compatibility (the TurboVNC RPM build, in particular, checks for this.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@978 632fc199-4ca6-4c93-a231-07263d6284db
 2013-05-01 06:03:53 +00:00
DRC
9495a94490 Fix 'make rpm' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@977 632fc199-4ca6-4c93-a231-07263d6284db
 2013-05-01 05:48:22 +00:00
DRC
fef9852da3 Extend the TurboJPEG Java API to support generating YUV images with arbitrary padding and to support image scaling when decompressing to YUV 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@975 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-28 01:32:52 +00:00
DRC
d0ad5a9447 Fix backward compatibility between the Java classes and the 1.2.x JNI library (as long as the 1.3 Java features are not used.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@974 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 23:25:17 +00:00
DRC
bb9e147872 Fix backward compatibility between the Java classes and the 1.2.x JNI library (as long as the 1.3 Java features are not used.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@973 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 22:48:08 +00:00
DRC
24211153fa Bump the age number of the TurboJPEG DSO, because interfaces have been added. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@972 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 22:18:29 +00:00
DRC
d6c06349ed Correct misuse of the word "pitch" + more code formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@971 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 20:55:45 +00:00
DRC
1d29c5f97b Correct misuse of the word "pitch" + more code formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@970 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 20:54:44 +00:00
DRC
ee20edd645 Code formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@969 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 12:38:20 +00:00
DRC
67bee8683d Code formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@968 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 12:36:07 +00:00
DRC
7a2f3a4edf Java doc tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@967 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 01:08:55 +00:00
DRC
65d4a46d3b Java doc tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@966 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-27 01:06:52 +00:00
DRC
fc5c0c645a Not that it matters, because JNI uses dlopen()/dlsym() to load symbols, but for bookkeeping purposes, move the JNI symbols introduced in libjpeg-turbo 1.3 into a new section. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@965 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 23:43:15 +00:00
DRC
c6eedebc6a Oops 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@964 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 23:41:51 +00:00
DRC
0c83e5af00 Not that it matters, because JNI uses dlopen()/dlsym() to load symbols, but for bookkeeping purposes, move the JNI symbols introduced in libjpeg-turbo 1.3 into a new section. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@963 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 23:39:23 +00:00
DRC
f610d61fcc Extend the TurboJPEG C API to support generating YUV images with arbitrary padding and to support image scaling when decompressing to YUV 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@962 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 10:33:29 +00:00
DRC
d8522a7587 Wordsmithing 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@961 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 08:54:10 +00:00
DRC
c49694a34a Further doc tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@960 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 08:46:46 +00:00
DRC
01fdcc391a Further doc tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@959 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 08:41:25 +00:00
DRC
17c3755f9a Subtle point, but since libjpeg-turbo 1.3 now supports scaling factors > 1, the width and height specified in tjDecompress2() are not necessarily smaller than the JPEG width/height. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@958 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 05:35:22 +00:00
DRC
9ce1a21ea7 Subtle point, but since libjpeg-turbo 1.3 now supports scaling factors > 1, the width and height specified in tjDecompress2() are not necessarily smaller than the JPEG width/height. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@957 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-26 05:32:32 +00:00
DRC
17745ddd86 Bump version to prepare for new features 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@956 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-25 09:45:50 +00:00
DRC
0bb37a5d5f Create 1.3.x branch 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.3.x@955 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-25 09:37:19 +00:00
DRC
4c17a453d1 Fix I/O suspension. This little nugget of code was introduced in r30 as part of an early attempt to make buffered I/O work with the optimized Huffman codec. Ultimately, r32 reverted a lot of that mess and introduced much of the logic we now use, rendering this code unnecessary, but it was never reverted because it only causes problems when I/O suspension is used, and apparently no one has tried to do that with libjpeg-turbo until now. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@954 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-25 08:55:31 +00:00
DRC
4578953843 For consistency, allow the name of the Mac and Cygwin packages to be overridden as well. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@953 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-24 23:39:37 +00:00
DRC
d7a642b571 Minor doc tweaks + ChangeLog update 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@951 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-24 06:40:25 +00:00
DRC
00400a0a58 In order to avoid a functional regression with previous releases, the JAR file needs to be able to load either the 64-bit or 32-bit JNI library on Un*x systems. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@950 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-24 06:21:24 +00:00
DRC
441308cffa Move the TurboJPEG DLLs back into the system directory on Windows platforms. For Windows, it doesn't really simplify the build system to install these libraries in c:\libjpeg-turbo*, and it introduces potential problems with loading the JNI library. Specifically, if a user linked their Java app against the 64-bit libjpeg-turbo SDK and then used a 32-bit JVM at run time, they would not be able to load the 32-bit turbojpeg.dll without manipulating java.library.path or the PATH environment (and vice versa for building against the 32-bit libjpeg-turbo SDK and using a 64-bit JVM at run time.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@949 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-24 05:26:42 +00:00
DRC
4b357abb6d Older versions of automake don't support multiple _JAVA primaries, but we don't actually have to specify a "dist" primary, since the Java sources are already included under EXTRA_DIST. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@948 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-24 03:36:30 +00:00
DRC
94f7ac929a Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@947 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-24 03:15:23 +00:00
DRC
7175e51792 Further enhancements/fixes to the packaging system: 
-- The Mac and Cygwin packages will now be created with the directory structure defined by the configure variables "prefix", "bindir", "libdir", etc., with the exception that the docs are always installed under /usr/share/doc/{package_name}-{version} on Cygwin and /Library/Documentation/{package_name} on Mac.
-- Fixed a duplicate filename warning when generating RPMs with the default prefix of /opt/libjpeg-turbo.
-- Moved the TurboJPEG libraries out of the system directory on Windows and Mac.  It is no longer necessary to put them there, since we are not trying to be backward compatible with TurboJPEG/IPP anymore.
-- Fixed an issue whereby building the "installer" target on Windows would not build the Java JAR file, thus causing an error if the JAR had not been previously built.
-- Building the "install" target on Windows will now install libjpeg-turbo into c:\libjpeg-turbo[-gcc][64] (the same directories used by the installers.)  This can be overridden by setting CMAKE_INSTALL_PREFIX.
-- The Java classes on all platforms will now look for the JNI library in the directory under which the build/packaging system installs it.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@946 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-23 22:29:00 +00:00
DRC
764e1e23aa Overhaul Linux/Unix packaging system, primarily to avoid conflicts with vendor-supplied libjpeg-turbo packages (such as in Fedora and RHEL 6.) This also streamlines the packaging system somewhat, since it is no longer necessary to move the TurboJPEG libraries into the system library directory. Relocating those libraries was originally done to provide backward compatibility with TurboJPEG/IPP, but that package is long obsolete, and the software that formerly used it has been linking statically with libjpeg-turbo for quite some time. 
If the default prefix (/opt/libjpeg-turbo) is used, then we now always install 32-bit libraries in /opt/libjpeg-turbo/lib32 and 64-bit libraries in /opt/libjpeg-turbo/lib64 instead of trying to conform to the Debian or Red Hat conventions.  The RPM and DEB packages will now be created with the directory structure defined by the configure variables "prefix", "bindir", "libdir", etc., with the exception that the docs are always installed under /usr/share/doc/{package_name}-{version}.


git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@944 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-19 04:25:14 +00:00
DRC
0ddff3b059 Formatting tweaks 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@943 632fc199-4ca6-4c93-a231-07263d6284db
 2013-04-11 05:17:53 +00:00
DRC
7eced19feb Remove unneeded headers (cdef.h isn't available on all platforms) and change u_int32_t to unsigned int, since u_int32_t isn't available on all platforms. This fixes build issues on Solaris. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@942 632fc199-4ca6-4c93-a231-07263d6284db
 2013-03-30 20:54:15 +00:00
DRC
08769b32f6 Grammar police 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@941 632fc199-4ca6-4c93-a231-07263d6284db
 2013-03-23 21:35:41 +00:00
DRC
f32640e8cb Document issues encountered when building on OS X 10.7 and later. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@939 632fc199-4ca6-4c93-a231-07263d6284db
 2013-03-23 09:57:03 +00:00
DRC
6cd1ec4b09 It's more correct to say "The Independent JPEG Group's software", since libjpeg-turbo emulates both the command-line and application programming interfaces. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@932 632fc199-4ca6-4c93-a231-07263d6284db
 2013-03-23 05:35:37 +00:00
DRC
7ed0aebdba Add note about how to obtain PackageMaker if using recent Xcode releases. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@931 632fc199-4ca6-4c93-a231-07263d6284db
 2013-02-24 20:39:30 +00:00
DRC
5e96c9bfe0 Bump version for post-beta pre-releases 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@930 632fc199-4ca6-4c93-a231-07263d6284db
 2013-02-22 06:58:31 +00:00
DRC
5a84a0e1b3 git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@929 632fc199-4ca6-4c93-a231-07263d6284db 2013-02-14 07:31:35 +00:00
DRC
fde862ba1d Trying to build ARM v7/v7s iOS binaries from the "official" libjpeg-turbo tarball (generated on RHEL4/autoconf 2.59/automake 1.9.2/libtool 1.5.6) using either Xcode 3.2.x or 4.5.x produces an error: "libtool: compile: unable to infer tagged configuration". Further study is warranted, but the most expedient way around it at the moment is to re-run autoconf on the OS X machine that is being used to generate the iOS binaries. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@928 632fc199-4ca6-4c93-a231-07263d6284db
 2013-02-11 03:38:53 +00:00
DRC
292fb8425e Fix 'make dist' 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@927 632fc199-4ca6-4c93-a231-07263d6284db
 2013-02-06 23:55:59 +00:00
DRC
0bf58f2145 Include a C version of md5cmp rather than depending on an external md5sum binary, since md5sum is not available on all platforms (specifically, it doesn't exist on FreeBSD, and it has to be installed via MacPorts on OS X.) 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@926 632fc199-4ca6-4c93-a231-07263d6284db
 2013-02-06 23:51:08 +00:00
DRC
a35de7cc08 Fix line break 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@925 632fc199-4ca6-4c93-a231-07263d6284db
 2013-02-04 23:46:52 +00:00
DRC
e2394fc58a Subtle point, but the libjpeg v7+ API is not backward incompatible. That is, programs that were built against jpeg-6b can still build against jpeg-7+ with no issues. It's only the ABI that is backward incompatible, so the primary justification for implementing the emulation feature was to provide run-time (ABI) compatibility. 
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.2.x@910 632fc199-4ca6-4c93-a231-07263d6284db
 2013-01-18 05:54:06 +00:00
461 changed files with 83495 additions and 47033 deletions
Expand all files Collapse all files

14
.gitignore vendored Normal file
View File

@@ -0,0 +1,14 @@
.DS_Store
Makefile.in
aclocal.m4
ar-lib
autom4te.cache
compile
config.guess
config.h.in
config.sub
configure
depcomp
install-sh
ltmain.sh
missing

857
BUILDING.md Normal file
View File

@@ -0,0 +1,857 @@
Building on Un*x Platforms (including Cygwin and OS X)
=======================================================
Build Requirements
------------------
- autoconf 2.56 or later
- automake 1.7 or later
- libtool 1.4 or later
* If using Xcode 4.3 or later on OS X, autoconf and automake are no longer
provided. The easiest way to obtain them is from
[MacPorts](http://www.MacPorts.org).
- NASM or YASM (if building x86 or x86-64 SIMD extensions)
* If using NASM, 0.98, or 2.01 or later is required for an x86 build (0.99
and 2.00 do not work properly with libjpeg-turbo's x86 SIMD code.)
* If using NASM, 2.00 or later is required for an x86-64 build.
* If using NASM, 2.07 or later (except 2.11.08) is required for an x86-64
Mac build (2.11.08 does not work properly with libjpeg-turbo's x86-64 SIMD
code when building macho64 objects.) NASM or YASM can be obtained from
[MacPorts](http://www.macports.org/).
The binary RPMs released by the NASM project do not work on older Linux
systems, such as Red Hat Enterprise Linux 4. On such systems, you can
easily build and install NASM from a source RPM by downloading one of the
SRPMs from
<http://www.nasm.us/pub/nasm/releasebuilds>
and executing the following as root:
ARCH=`uname -m`
rpmbuild --rebuild nasm-{version}.src.rpm
rpm -Uvh /usr/src/redhat/RPMS/$ARCH/nasm-{version}.$ARCH.rpm
NOTE: the NASM build will fail if texinfo is not installed.
- GCC v4.1 (or later) or clang recommended for best performance
- If building the TurboJPEG Java wrapper, JDK or OpenJDK 1.5 or later is
required. Some systems, such as Solaris 10 and later and Red Hat Enterprise
Linux 5 and later, have this pre-installed. On OS X 10.5 and 10.6, it will
be necessary to install the Java Developer Package, which can be downloaded
from <http://developer.apple.com/downloads> (Apple ID required.) For other
systems, you can obtain the Oracle Java Development Kit from
<http://www.java.com>.
Out-of-Tree Builds
------------------
Binary objects, libraries, and executables are generated in the same directory
from which `configure` was executed (the "binary directory"), and this
directory need not necessarily be the same as the libjpeg-turbo source
directory. You can create multiple independent binary directories, in which
different versions of libjpeg-turbo can be built from the same source tree
using different compilers or settings. In the sections below,
*{build_directory}* refers to the binary directory, whereas
*{source_directory}* refers to the libjpeg-turbo source directory. For in-tree
builds, these directories are the same.
Building libjpeg-turbo
----------------------
The following procedure will build libjpeg-turbo on Linux, FreeBSD, Cygwin, and
Solaris/x86 systems (on Solaris, this generates a 32-bit library. See below
for 64-bit build instructions.)
cd {source_directory}
autoreconf -fiv
cd {build_directory}
sh {source_directory}/configure [additional configure flags]
make
NOTE: Running autoreconf in the source directory is not necessary if building
libjpeg-turbo from one of the official release tarballs.
This will generate the following files under .libs/:
**libjpeg.a**
Static link library for the libjpeg API
**libjpeg.so.{version}** (Linux, Unix)
**libjpeg.{version}.dylib** (OS X)
**cygjpeg-{version}.dll** (Cygwin)
Shared library for the libjpeg API
By default, *{version}* is 62.1.0, 7.1.0, or 8.0.2, depending on whether
libjpeg v6b (default), v7, or v8 emulation is enabled. If using Cygwin,
*{version}* is 62, 7, or 8.
**libjpeg.so** (Linux, Unix)
**libjpeg.dylib** (OS X)
Development symlink for the libjpeg API
**libjpeg.dll.a** (Cygwin)
Import library for the libjpeg API
**libturbojpeg.a**
Static link library for the TurboJPEG API
**libturbojpeg.so.0.1.0** (Linux, Unix)
**libturbojpeg.0.1.0.dylib** (OS X)
**cygturbojpeg-0.dll** (Cygwin)
Shared library for the TurboJPEG API
**libturbojpeg.so** (Linux, Unix)
**libturbojpeg.dylib** (OS X)
Development symlink for the TurboJPEG API
**libturbojpeg.dll.a** (Cygwin)
Import library for the TurboJPEG API
### libjpeg v7 or v8 API/ABI Emulation
Add `--with-jpeg7` to the `configure` command line to build a version of
libjpeg-turbo that is API/ABI-compatible with libjpeg v7. Add `--with-jpeg8`
to the `configure` command to build a version of libjpeg-turbo that is
API/ABI-compatible with libjpeg v8. See [README.md](README.md) for more
information on libjpeg v7 and v8 emulation.
### In-Memory Source/Destination Managers
When using libjpeg v6b or v7 API/ABI emulation, add `--without-mem-srcdst` to
the `configure` command line to build a version of libjpeg-turbo that lacks the
`jpeg_mem_src()` and `jpeg_mem_dest()` functions. These functions were not
part of the original libjpeg v6b and v7 APIs, so removing them ensures strict
conformance with those APIs. See [README.md](README.md) for more information.
### Arithmetic Coding Support
Since the patent on arithmetic coding has expired, this functionality has been
included in this release of libjpeg-turbo. libjpeg-turbo's implementation is
based on the implementation in libjpeg v8, but it works when emulating libjpeg
v7 or v6b as well. The default is to enable both arithmetic encoding and
decoding, but those who have philosophical objections to arithmetic coding can
add `--without-arith-enc` or `--without-arith-dec` to the `configure` command
line to disable encoding or decoding (respectively.)
### TurboJPEG Java Wrapper
Add `--with-java` to the `configure` command line to incorporate an optional
Java Native Interface wrapper into the TurboJPEG shared library and build the
Java front-end classes to support it. This allows the TurboJPEG shared library
to be used directly from Java applications. See [java/README](java/README) for
more details.
You can set the `JAVAC`, `JAR`, and `JAVA` configure variables to specify
alternate commands for javac, jar, and java (respectively.) You can also
set the `JAVACFLAGS` configure variable to specify arguments that should be
passed to the Java compiler when building the front-end classes, and
`JNI_CFLAGS` to specify arguments that should be passed to the C compiler when
building the JNI wrapper. Run `configure --help` for more details.
Installing libjpeg-turbo
------------------------
If you intend to install these libraries and the associated header files, then
replace 'make' in the instructions above with
make install prefix={base dir} libdir={library directory}
For example,
make install prefix=/usr/local libdir=/usr/local/lib64
will install the header files in /usr/local/include and the library files in
/usr/local/lib64. If `prefix` and `libdir` are not specified, then the default
is to install the header files in /opt/libjpeg-turbo/include and the library
files in /opt/libjpeg-turbo/lib32 (32-bit) or /opt/libjpeg-turbo/lib64
(64-bit.)
NOTE: You can specify a prefix of /usr and a libdir of, for instance,
/usr/lib64 to overwrite the system's version of libjpeg. If you do this,
however, then be sure to BACK UP YOUR SYSTEM'S INSTALLATION OF LIBJPEG before
overwriting it. It is recommended that you instead install libjpeg-turbo into
a non-system directory and manipulate the `LD_LIBRARY_PATH` or create symlinks
to force applications to use libjpeg-turbo instead of libjpeg. See
[README.md](README.md) for more information.
Build Recipes
-------------
### 32-bit Build on 64-bit Linux
Add
--host i686-pc-linux-gnu CFLAGS='-O3 -m32' LDFLAGS=-m32
to the `configure` command line.
### 64-bit Build on 64-bit OS X
Add
--host x86_64-apple-darwin NASM=/opt/local/bin/nasm
to the `configure` command line. NASM 2.07 or later from MacPorts must be
installed.
### 32-bit Build on 64-bit OS X
Add
--host i686-apple-darwin CFLAGS='-O3 -m32' LDFLAGS=-m32
to the `configure` command line.
### 64-bit Backward-Compatible Build on 64-bit OS X
Add
--host x86_64-apple-darwin NASM=/opt/local/bin/nasm \
CFLAGS='-mmacosx-version-min=10.5 -O3' \
LDFLAGS='-mmacosx-version-min=10.5'
to the `configure` command line. NASM 2.07 or later from MacPorts must be
installed.
### 32-bit Backward-Compatible Build on OS X
Add
--host i686-apple-darwin \
CFLAGS='-mmacosx-version-min=10.5 -O3 -m32' \
LDFLAGS='-mmacosx-version-min=10.5 -m32'
to the `configure` command line.
### 64-bit Build on 64-bit Solaris
Add
--host x86_64-pc-solaris CFLAGS='-O3 -m64' LDFLAGS=-m64
to the `configure` command line.
### 32-bit Build on 64-bit FreeBSD
Add
--host i386-unknown-freebsd CC='gcc -B /usr/lib32' CFLAGS='-O3 -m32' \
LDFLAGS='-B/usr/lib32'
to the `configure` command line. NASM 2.07 or later from FreeBSD ports must be
installed.
### Oracle Solaris Studio
Add
CC=cc
to the `configure` command line. libjpeg-turbo will automatically be built
with the maximum optimization level (-xO5) unless you override `CFLAGS`.
To build a 64-bit version of libjpeg-turbo using Oracle Solaris Studio, add
--host x86_64-pc-solaris CC=cc CFLAGS='-xO5 -m64' LDFLAGS=-m64
to the `configure` command line.
### MinGW Build on Cygwin
Use CMake (see recipes below)
ARM Support
-----------
This release of libjpeg-turbo can use ARM NEON SIMD instructions to accelerate
JPEG compression/decompression by approximately 2-4x on ARMv7 and later
platforms. If libjpeg-turbo is configured on an ARM Linux platform, then the
build system will automatically include the NEON SIMD routines, if they are
supported. Build instructions for other ARM-based platforms follow.
### Building libjpeg-turbo for iOS
iOS platforms, such as the iPhone and iPad, use ARM processors, some of which
support NEON instructions. Additional steps are required in order to build
libjpeg-turbo for these platforms.
#### Additional build requirements
- [gas-preprocessor.pl]
(https://raw.githubusercontent.com/libjpeg-turbo/gas-preprocessor/master/gas-preprocessor.pl)
should be installed in your `PATH`.
#### ARM 32-bit Build (Xcode 4.6.x and earlier, LLVM-GCC)
Set the following shell variables for simplicity:
*Xcode 4.2 and earlier*
IOS_PLATFORMDIR=/Developer/Platforms/iPhoneOS.platform`
*Xcode 4.3 and later*
IOS_PLATFORMDIR=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform
*All Xcode versions*
IOS_SYSROOT=$IOS_PLATFORMDIR/Developer/SDKs/iPhoneOS*.sdk
IOS_GCC=$IOS_PLATFORMDIR/Developer/usr/bin/arm-apple-darwin10-llvm-gcc-4.2
*ARMv7 (code will run on iPhone 3GS-4S/iPad 1st-3rd Generation and newer)*
IOS_CFLAGS="-march=armv7 -mcpu=cortex-a8 -mtune=cortex-a8 -mfpu=neon"
*ARMv7s (code will run on iPhone 5/iPad 4th Generation and newer)*
[NOTE: Requires Xcode 4.5 or later]
IOS_CFLAGS="-march=armv7s -mcpu=swift -mtune=swift -mfpu=neon"
Follow the procedure under "Building libjpeg-turbo" above, adding
--host arm-apple-darwin10 \
CC="$IOS_GCC" LD="$IOS_GCC" \
CFLAGS="-mfloat-abi=softfp -isysroot $IOS_SYSROOT -O3 $IOS_CFLAGS" \
LDFLAGS="-mfloat-abi=softfp -isysroot $IOS_SYSROOT $IOS_CFLAGS"
to the `configure` command line.
#### ARM 32-bit Build (Xcode 5.0.x and later, Clang)
Set the following shell variables for simplicity:
IOS_PLATFORMDIR=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform
IOS_SYSROOT=$IOS_PLATFORMDIR/Developer/SDKs/iPhoneOS*.sdk
IOS_GCC=/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang
*ARMv7 (code will run on iPhone 3GS-4S/iPad 1st-3rd Generation and newer)*
IOS_CFLAGS="-arch armv7"
*ARMv7s (code will run on iPhone 5/iPad 4th Generation and newer)*
IOS_CFLAGS="-arch armv7s"
Follow the procedure under "Building libjpeg-turbo" above, adding
--host arm-apple-darwin10 \
CC="$IOS_GCC" LD="$IOS_GCC" \
CFLAGS="-mfloat-abi=softfp -isysroot $IOS_SYSROOT -O3 $IOS_CFLAGS" \
LDFLAGS="-mfloat-abi=softfp -isysroot $IOS_SYSROOT $IOS_CFLAGS" \
CCASFLAGS="-no-integrated-as $IOS_CFLAGS"
to the `configure` command line.
#### ARMv8 64-bit Build (Xcode 5.0.x and later, Clang)
Code will run on iPhone 5S/iPad Mini 2/iPad Air and newer.
Set the following shell variables for simplicity:
IOS_PLATFORMDIR=/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform
IOS_SYSROOT=$IOS_PLATFORMDIR/Developer/SDKs/iPhoneOS*.sdk
IOS_GCC=/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/clang
IOS_CFLAGS="-arch arm64"
Follow the procedure under "Building libjpeg-turbo" above, adding
--host aarch64-apple-darwin \
CC="$IOS_GCC" LD="$IOS_GCC" \
CFLAGS="-isysroot $IOS_SYSROOT -O3 $IOS_CFLAGS" \
LDFLAGS="-isysroot $IOS_SYSROOT $IOS_CFLAGS"
to the `configure` command line.
NOTE: You can also add `-miphoneos-version-min={version}` to `$IOS_CFLAGS`
above in order to support older versions of iOS than the default version
supported by the SDK.
Once built, lipo can be used to combine the ARMv7, v7s, and/or v8 variants into
a universal library.
### Building libjpeg-turbo for Android
Building libjpeg-turbo for Android platforms requires the
{Android NDK}(https://developer.android.com/tools/sdk/ndk)
and autotools. The following is a general recipe script that can be modified for your specific needs.
# Set these variables to suit your needs
NDK_PATH={full path to the "ndk" directory-- for example, /opt/android/ndk}
BUILD_PLATFORM={the platform name for the NDK package you installed--
for example, "windows-x86" or "linux-x86_64" or "darwin-x86_64"}
TOOLCHAIN_VERSION={"4.8", "4.9", "clang3.5", etc. This corresponds to a
toolchain directory under ${NDK_PATH}/toolchains/.}
ANDROID_VERSION={The minimum version of Android to support-- for example,
"16", "19", etc. "21" or later is required for a 64-bit build.}
# 32-bit ARMv7 build
HOST=arm-linux-androideabi
SYSROOT=${NDK_PATH}/platforms/android-${ANDROID_VERSION}/arch-arm
ANDROID_CFLAGS="-march=armv7-a -mfloat-abi=softfp -fprefetch-loop-arrays \
--sysroot=${SYSROOT}"
# 64-bit ARMv8 build
HOST=aarch64-linux-android
SYSROOT=${NDK_PATH}/platforms/android-${ANDROID_VERSION}/arch-arm64
ANDROID_CFLAGS="--sysroot=${SYSROOT}"
TOOLCHAIN=${NDK_PATH}/toolchains/${HOST}-${TOOLCHAIN_VERSION}/prebuilt/${BUILD_PLATFORM}
ANDROID_INCLUDES="-I${SYSROOT}/usr/include -I${TOOLCHAIN}/include"
export CPP=${TOOLCHAIN}/bin/${HOST}-cpp
export AR=${TOOLCHAIN}/bin/${HOST}-ar
export AS=${TOOLCHAIN}/bin/${HOST}-as
export NM=${TOOLCHAIN}/bin/${HOST}-nm
export CC=${TOOLCHAIN}/bin/${HOST}-gcc
export LD=${TOOLCHAIN}/bin/${HOST}-ld
export RANLIB=${TOOLCHAIN}/bin/${HOST}-ranlib
export OBJDUMP=${TOOLCHAIN}/bin/${HOST}-objdump
export STRIP=${TOOLCHAIN}/bin/${HOST}-strip
cd {build_directory}
sh {source_directory}/configure --host=${HOST} \
CFLAGS="${ANDROID_INCLUDES} ${ANDROID_CFLAGS} -O3 -fPIE" \
CPPFLAGS="${ANDROID_INCLUDES} ${ANDROID_CFLAGS}" \
LDFLAGS="${ANDROID_CFLAGS} -pie" --with-simd ${1+"$@"}
make
If building for Android 4.0.x (API level < 16) or earlier, remove `-fPIE` from
`CFLAGS` and `-pie` from `LDFLAGS`.
Building on Windows (Visual C++ or MinGW)
=========================================
Build Requirements
------------------
- [CMake](http://www.cmake.org) v2.8.11 or later
- [NASM](http://www.nasm.us) or [YASM](http://yasm.tortall.net)
* If using NASM, 0.98 or later is required for an x86 build.
* If using NASM, 2.05 or later is required for an x86-64 build.
* nasm.exe/yasm.exe should be in your `PATH`.
- Microsoft Visual C++ 2005 or later
If you don't already have Visual C++, then the easiest way to get it is by
installing the
[Windows SDK](http://msdn.microsoft.com/en-us/windows/bb980924.aspx).
The Windows SDK includes both 32-bit and 64-bit Visual C++ compilers and
everything necessary to build libjpeg-turbo.
* You can also use Microsoft Visual Studio Express/Community Edition, which
is a free download. (NOTE: versions prior to 2012 can only be used to
build 32-bit code.)
* If you intend to build libjpeg-turbo from the command line, then add the
appropriate compiler and SDK directories to the `INCLUDE`, `LIB`, and
`PATH` environment variables. This is generally accomplished by
executing `vcvars32.bat` or `vcvars64.bat` and `SetEnv.cmd`.
`vcvars32.bat` and `vcvars64.bat` are part of Visual C++ and are located in
the same directory as the compiler. `SetEnv.cmd` is part of the Windows
SDK. You can pass optional arguments to `SetEnv.cmd` to specify a 32-bit
or 64-bit build environment.
... OR ...
- MinGW
[MinGW-builds](http://sourceforge.net/projects/mingwbuilds/) or
[tdm-gcc](http://tdm-gcc.tdragon.net/) recommended if building on a Windows
machine. Both distributions install a Start Menu link that can be used to
launch a command prompt with the appropriate compiler paths automatically
set.
- If building the TurboJPEG Java wrapper, JDK 1.5 or later is required. This
can be downloaded from <http://www.java.com>.
Out-of-Tree Builds
------------------
Binary objects, libraries, and executables are generated in the same directory
from which `cmake` was executed (the "binary directory"), and this directory
need not necessarily be the same as the libjpeg-turbo source directory. You
can create multiple independent binary directories, in which different versions
of libjpeg-turbo can be built from the same source tree using different
compilers or settings. In the sections below, *{build_directory}* refers to
the binary directory, whereas *{source_directory}* refers to the libjpeg-turbo
source directory. For in-tree builds, these directories are the same.
Building libjpeg-turbo
----------------------
### Visual C++ (Command Line)
cd {build_directory}
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release {source_directory}
nmake
This will build either a 32-bit or a 64-bit version of libjpeg-turbo, depending
on which version of cl.exe is in the `PATH`.
The following files will be generated under *{build_directory}*:
**jpeg-static.lib**
Static link library for the libjpeg API
**sharedlib/jpeg{version}.dll**
DLL for the libjpeg API
**sharedlib/jpeg.lib**
Import library for the libjpeg API
**turbojpeg-static.lib**
Static link library for the TurboJPEG API
**turbojpeg.dll**
DLL for the TurboJPEG API
**turbojpeg.lib**
Import library for the TurboJPEG API
*{version}* is 62, 7, or 8, depending on whether libjpeg v6b (default), v7, or
v8 emulation is enabled.
### Visual C++ (IDE)
Choose the appropriate CMake generator option for your version of Visual Studio
(run `cmake` with no arguments for a list of available generators.) For
instance:
cd {build_directory}
cmake -G "Visual Studio 10" {source_directory}
NOTE: Add "Win64" to the generator name (for example, "Visual Studio 10
Win64") to build a 64-bit version of libjpeg-turbo. Recent versions of CMake
no longer document that. A separate build directory must be used for 32-bit
and 64-bit builds.
You can then open ALL_BUILD.vcproj in Visual Studio and build one of the
configurations in that project ("Debug", "Release", etc.) to generate a full
build of libjpeg-turbo.
This will generate the following files under *{build_directory}*:
**{configuration}/jpeg-static.lib**
Static link library for the libjpeg API
**sharedlib/{configuration}/jpeg{version}.dll**
DLL for the libjpeg API
**sharedlib/{configuration}/jpeg.lib**
Import library for the libjpeg API
**{configuration}/turbojpeg-static.lib**
Static link library for the TurboJPEG API
**{configuration}/turbojpeg.dll**
DLL for the TurboJPEG API
**{configuration}/turbojpeg.lib**
Import library for the TurboJPEG API
*{configuration}* is Debug, Release, RelWithDebInfo, or MinSizeRel, depending
on the configuration you built in the IDE, and *{version}* is 62, 7, or 8,
depending on whether libjpeg v6b (default), v7, or v8 emulation is enabled.
### MinGW
NOTE: This assumes that you are building on a Windows machine. If you are
cross-compiling on a Linux/Unix machine, then see "Build Recipes" below.
cd {build_directory}
cmake -G "MinGW Makefiles" {source_directory}
mingw32-make
This will generate the following files under *{build_directory}*:
**libjpeg.a**
Static link library for the libjpeg API
**sharedlib/libjpeg-{version}.dll**
DLL for the libjpeg API
**sharedlib/libjpeg.dll.a**
Import library for the libjpeg API
**libturbojpeg.a**
Static link library for the TurboJPEG API
**libturbojpeg.dll**
DLL for the TurboJPEG API
**libturbojpeg.dll.a**
Import library for the TurboJPEG API
*{version}* is 62, 7, or 8, depending on whether libjpeg v6b (default), v7, or
v8 emulation is enabled.
### Debug Build
Add `-DCMAKE_BUILD_TYPE=Debug` to the `cmake` command line. Or, if building
with NMake, remove `-DCMAKE_BUILD_TYPE=Release` (Debug builds are the default
with NMake.)
### libjpeg v7 or v8 API/ABI Emulation
Add `-DWITH_JPEG7=1` to the `cmake` command line to build a version of
libjpeg-turbo that is API/ABI-compatible with libjpeg v7. Add `-DWITH_JPEG8=1`
to the `cmake` command line to build a version of libjpeg-turbo that is
API/ABI-compatible with libjpeg v8. See [README.md](README.md) for more
information on libjpeg v7 and v8 emulation.
### In-Memory Source/Destination Managers
When using libjpeg v6b or v7 API/ABI emulation, add `-DWITH_MEM_SRCDST=0` to
the `cmake` command line to build a version of libjpeg-turbo that lacks the
`jpeg_mem_src()` and `jpeg_mem_dest()` functions. These functions were not
part of the original libjpeg v6b and v7 APIs, so removing them ensures strict
conformance with those APIs. See [README.md](README.md) for more information.
### Arithmetic Coding Support
Since the patent on arithmetic coding has expired, this functionality has been
included in this release of libjpeg-turbo. libjpeg-turbo's implementation is
based on the implementation in libjpeg v8, but it works when emulating libjpeg
v7 or v6b as well. The default is to enable both arithmetic encoding and
decoding, but those who have philosophical objections to arithmetic coding can
add `-DWITH_ARITH_ENC=0` or `-DWITH_ARITH_DEC=0` to the `cmake` command line to
disable encoding or decoding (respectively.)
### TurboJPEG Java Wrapper
Add `-DWITH_JAVA=1` to the `cmake` command line to incorporate an optional Java
Native Interface wrapper into the TurboJPEG shared library and build the Java
front-end classes to support it. This allows the TurboJPEG shared library to
be used directly from Java applications. See [java/README](java/README) for
more details.
You can set the `Java_JAVAC_EXECUTABLE`, `Java_JAVA_EXECUTABLE`, and
`Java_JAR_EXECUTABLE` CMake variables to specify alternate commands or
locations for javac, jar, and java (respectively.) You can also set the
`JAVACFLAGS` CMake variable to specify arguments that should be passed to the
Java compiler when building the front-end classes.
Installing libjpeg-turbo
------------------------
You can use the build system to install libjpeg-turbo into a directory of your
choosing (as opposed to creating an installer.) To do this, add:
-DCMAKE_INSTALL_PREFIX={install_directory}
to the cmake command line.
For example,
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=c:\libjpeg-turbo {source_directory}
nmake install
will install the header files in c:\libjpeg-turbo\include, the library files
in c:\libjpeg-turbo\lib, the DLL's in c:\libjpeg-turbo\bin, and the
documentation in c:\libjpeg-turbo\doc.
Build Recipes
-------------
### 64-bit MinGW Build on Cygwin
cd {build_directory}
CC=/usr/bin/x86_64-w64-mingw32-gcc \
cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
-DCMAKE_RC_COMPILER=/usr/bin/x86_64-w64-mingw32-windres.exe \
{source_directory}
make
This produces a 64-bit build of libjpeg-turbo that does not depend on
cygwin1.dll or other Cygwin DLL's. The mingw64-x86\_64-gcc-core and
mingw64-x86\_64-gcc-g++ packages (and their dependencies) must be installed.
### 32-bit MinGW Build on Cygwin
cd {build_directory}
CC=/usr/bin/i686-w64-mingw32-gcc \
cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
-DCMAKE_RC_COMPILER=/usr/bin/i686-w64-mingw32-windres.exe \
{source_directory}
make
This produces a 32-bit build of libjpeg-turbo that does not depend on
cygwin1.dll or other Cygwin DLL's. The mingw64-i686-gcc-core and
mingw64-i686-gcc-g++ packages (and their dependencies) must be installed.
### MinGW Build on Linux
cd {build_directory}
CC={mingw_binary_path}/i686-pc-mingw32-gcc \
cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
-DCMAKE_RC_COMPILER={mingw_binary_path}/i686-pc-mingw32-windres \
-DCMAKE_AR={mingw_binary_path}/i686-pc-mingw32-ar \
-DCMAKE_RANLIB={mingw_binary_path}/i686-pc-mingw32-ranlib \
{source_directory}
make
Creating Release Packages
=========================
The following commands can be used to create various types of release packages:
Unix/Linux
----------
make rpm
Create Red Hat-style binary RPM package. Requires RPM v4 or later.
make srpm
This runs `make dist` to create a pristine source tarball, then creates a
Red Hat-style source RPM package from the tarball. Requires RPM v4 or later.
make deb
Create Debian-style binary package. Requires dpkg.
make dmg
Create Macintosh package/disk image. This requires pkgbuild and
productbuild, which are installed by default on OS X 10.7 and later and which
can be obtained by installing Xcode 3.2.6 (with the "Unix Development"
option) on OS X 10.6. Packages built in this manner can be installed on OS X
10.5 and later, but they must be built on OS X 10.6 or later.
make udmg [BUILDDIR32={32-bit build directory}]
On 64-bit OS X systems, this creates a Macintosh package and disk image that
contains universal i386/x86-64 binaries. You should first configure a 32-bit
out-of-tree build of libjpeg-turbo, then configure a 64-bit out-of-tree
build, then run `make udmg` from the 64-bit build directory. The build
system will look for the 32-bit build under *{source_directory}*/osxx86 by
default, but you can override this by setting the `BUILDDIR32` variable on the
make command line as shown above.
make iosdmg [BUILDDIR32={32-bit build directory}] \
[BUILDDIRARMV7={ARMv7 build directory}] \
[BUILDDIRARMV7S={ARMv7s build directory}] \
[BUILDDIRARMV8={ARMv8 build directory}]
On OS X systems, this creates a Macintosh package and disk image in which the
libjpeg-turbo static libraries contain ARM architectures necessary to build
iOS applications. If building on an x86-64 system, the binaries will also
contain the i386 architecture, as with `make udmg` above. You should first
configure ARMv7, ARMv7s, and/or ARMv8 out-of-tree builds of libjpeg-turbo (see
"Building libjpeg-turbo for iOS" above.) If you are building an x86-64 version
of libjpeg-turbo, you should configure a 32-bit out-of-tree build as well.
Next, build libjpeg-turbo as you would normally, using an out-of-tree build.
When it is built, run `make iosdmg` from the build directory. The build system
will look for the ARMv7 build under *{source_directory}*/iosarmv7 by default,
the ARMv7s build under *{source_directory}*/iosarmv7s by default, the ARMv8
build under *{source_directory}*/iosarmv8 by default, and (if applicable) the
32-bit build under *{source_directory}*/osxx86 by default, but you can override
this by setting the `BUILDDIR32`, `BUILDDIRARMV7`, `BUILDDIRARMV7S`, and/or
`BUILDDIRARMV8` variables on the `make` command line as shown above.
NOTE: If including an ARMv8 build in the package, then you may need to use
Xcode's version of lipo instead of the operating system's. To do this, pass
an argument of `LIPO="xcrun lipo"` on the make command line.
make cygwinpkg
Build a Cygwin binary package.
Windows
-------
If using NMake:
cd {build_directory}
nmake installer
If using MinGW:
cd {build_directory}
make installer
If using the Visual Studio IDE, build the "installer" project.
The installer package (libjpeg-turbo[-gcc][64].exe) will be located under
*{build_directory}*. If building using the Visual Studio IDE, then the
installer package will be located in a subdirectory with the same name as the
configuration you built (such as *{build_directory}*\Debug\ or
*{build_directory}*\Release\).
Building a Windows installer requires the Nullsoft Install System
(http://nsis.sourceforge.net/.) makensis.exe should be in your `PATH`.
Regression testing
==================
The most common way to test libjpeg-turbo is by invoking `make test` on
Unix/Linux platforms or `ctest` on Windows platforms, once the build has
completed. This runs a series of tests to ensure that mathematical
compatibility has been maintained between libjpeg-turbo and libjpeg v6b. This
also invokes the TurboJPEG unit tests, which ensure that the colorspace
extensions, YUV encoding, decompression scaling, and other features of the
TurboJPEG C and Java APIs are working properly (and, by extension, that the
equivalent features of the underlying libjpeg API are also working.)
Invoking `make testclean` or `nmake testclean` (if using NMake) or building
the 'testclean' target (if using the Visual Studio IDE) will clean up the
output images generated by `make test`.
On Unix/Linux platforms, more extensive tests of the TurboJPEG C and Java
wrappers can be run by invoking `make tjtest`. These extended TurboJPEG tests
essentially iterate through all of the available features of the TurboJPEG APIs
that are not covered by the TurboJPEG unit tests (this includes the lossless
transform options) and compare the images generated by each feature to images
generated using the equivalent feature in the libjpeg API. The extended
TurboJPEG tests are meant to test for regressions in the TurboJPEG wrappers,
not in the underlying libjpeg API library.

765
BUILDING.txt
View File

@@ -1,765 +0,0 @@
*******************************************************************************
** Building on Unix Platforms (including Cygwin)
*******************************************************************************
==================
Build Requirements
==================
-- autoconf 2.56 or later
-- automake 1.7 or later
-- libtool 1.4 or later
-- NASM (if building x86 or x86-64 SIMD extensions)
* 0.98, or 2.01 or later is required for a 32-bit build
* NASM 2.00 or later is required for a 64-bit build
* NASM 2.07 or later is required for a 64-bit build on OS X. This can be
obtained from MacPorts (http://www.macports.org/).
The binary RPMs released by the NASM project do not work on older Linux
systems, such as Red Hat Enterprise Linux 4. On such systems, you can
easily build and install NASM from a source RPM by downloading one of the
SRPMs from
http://www.nasm.us/pub/nasm/releasebuilds
and executing the following as root:
ARCH=`uname -m`
rpmbuild --rebuild nasm-{version}.src.rpm
rpm -Uvh /usr/src/redhat/RPMS/$ARCH/nasm-{version}.$ARCH.rpm
NOTE: the NASM build will fail if texinfo is not installed.
-- GCC v4.1 or later recommended for best performance
-- If building the TurboJPEG Java wrapper, JDK or OpenJDK 1.5 or later is
required. Some systems, such as OS X 10.4, Solaris 10 and later, and Red
Hat Enterprise Linux 5 and later, have this pre-installed. On OS X 10.5 and
later, it will be necessary to install the Java Developer Package, which can
be downloaded from http://connect.apple.com. For systems that do not have a
JDK installed, you can obtain the Oracle Java Development Kit from
http://www.java.com.
==================
Out-of-Tree Builds
==================
Binary objects, libraries, and executables are generated in the same directory
from which configure was executed (the "binary directory"), and this directory
need not necessarily be the same as the libjpeg-turbo source directory. You
can create multiple independent binary directories, in which different versions
of libjpeg-turbo can be built from the same source tree using different
compilers or settings. In the sections below, {build_directory} refers to the
binary directory, whereas {source_directory} refers to the libjpeg-turbo source
directory. For in-tree builds, these directories are the same.
======================
Building libjpeg-turbo
======================
The following procedure will build libjpeg-turbo on Linux, FreeBSD, Cygwin, and
Solaris/x86 systems (on Solaris, this generates a 32-bit library. See below
for 64-bit build instructions.)
cd {source_directory}
autoreconf -fiv
cd {build_directory}
sh {source_directory}/configure [additional configure flags]
make
NOTE: Running autoreconf in the source directory is only necessary if building
libjpeg-turbo from the SVN repository.
This will generate the following files under .libs/
libjpeg.a
Static link library for the libjpeg API
libjpeg.so.{version} (Linux, Unix)
libjpeg.{version}.dylib (OS X)
cygjpeg-{version}.dll (Cygwin)
Shared library for the libjpeg API
By default, {version} is 62.1.0, 7.1.0, or 8.0.2, depending on whether
libjpeg v6b (default), v7, or v8 emulation is enabled. If using Cygwin,
{version} is 62, 7, or 8.
libjpeg.so (Linux, Unix)
libjpeg.dylib (OS X)
Development symlink for the libjpeg API
libjpeg.dll.a (Cygwin)
Import library for the libjpeg API
libturbojpeg.a
Static link library for the TurboJPEG API
libturbojpeg.so.0.0.0 (Linux, Unix)
libturbojpeg.0.0.0.dylib (OS X)
cygturbojpeg-0.dll (Cygwin)
Shared library for the TurboJPEG API
libturbojpeg.so (Linux, Unix)
libturbojpeg.dylib (OS X)
Development symlink for the TurboJPEG API
libturbojpeg.dll.a (Cygwin)
Import library for the TurboJPEG API
libjpeg v7 or v8 API/ABI Emulation
----------------------------------
Add --with-jpeg7 to the configure command line to build a version of
libjpeg-turbo that is API/ABI-compatible with libjpeg v7. Add --with-jpeg8 to
the configure command to build a version of libjpeg-turbo that is
API/ABI-compatible with libjpeg v8. See README-turbo.txt for more information
on libjpeg v7 and v8 emulation.
In-Memory Source/Destination Managers
-------------------------------------
When using libjpeg v6b or v7 API/ABI emulation, add --without-mem-srcdst to the
configure command line to build a version of libjpeg-turbo that lacks the
jpeg_mem_src() and jpeg_mem_dest() functions. These functions were not part of
the original libjpeg v6b and v7 APIs, so removing them ensures strict
conformance with those APIs. See README-turbo.txt for more information.
Arithmetic Coding Support
-------------------------
Since the patent on arithmetic coding has expired, this functionality has been
included in this release of libjpeg-turbo. libjpeg-turbo's implementation is
based on the implementation in libjpeg v8, but it works when emulating libjpeg
v7 or v6b as well. The default is to enable both arithmetic encoding and
decoding, but those who have philosophical objections to arithmetic coding can
add --without-arith-enc or --without-arith-dec to the configure command line to
disable encoding or decoding (respectively.)
TurboJPEG Java Wrapper
----------------------
Add --with-java to the configure command line to incorporate an optional Java
Native Interface wrapper into the TurboJPEG shared library and build the Java
front-end classes to support it. This allows the TurboJPEG shared library to
be used directly from Java applications. See java/README for more details.
You can set the JAVAC, JAR, and JAVA configure variables to specify
alternate commands for javac, jar, and java (respectively.) You can also
set the JAVACFLAGS configure variable to specify arguments that should be
passed to the Java compiler when building the front-end classes, and JNI_CFLAGS
to specify arguments that should be passed to the C compiler when building the
JNI wrapper. Run 'configure --help' for more details.
========================
Installing libjpeg-turbo
========================
If you intend to install these libraries and the associated header files, then
replace 'make' in the instructions above with
make install prefix={base dir} libdir={library directory}
For example,
make install prefix=/usr/local libdir=/usr/local/lib64
will install the header files in /usr/local/include and the library files in
/usr/local/lib64. If 'prefix' and 'libdir' are not specified, then the default
is to install the header files in /opt/libjpeg-turbo/include and the library
files in /opt/libjpeg-turbo/lib.
NOTE: You can specify a prefix of /usr and a libdir of, for instance,
/usr/lib64 to overwrite the system's version of libjpeg. If you do this,
however, then be sure to BACK UP YOUR SYSTEM'S INSTALLATION OF LIBJPEG before
overwriting it. It is recommended that you instead install libjpeg-turbo into
a non-system directory and manipulate the LD_LIBRARY_PATH or create symlinks
to force applications to use libjpeg-turbo instead of libjpeg. See
README-turbo.txt for more information.
=============
Build Recipes
=============
32-bit Build on 64-bit Linux
----------------------------
Add
--host i686-pc-linux-gnu CFLAGS='-O3 -m32' LDFLAGS=-m32
to the configure command line.
64-bit Build on 64-bit OS X
---------------------------
Add
--host x86_64-apple-darwin NASM=/opt/local/bin/nasm
to the configure command line. NASM 2.07 or later from MacPorts must be
installed.
32-bit Build on 64-bit OS X
---------------------------
Add
--host i686-apple-darwin CFLAGS='-O3 -m32' LDFLAGS=-m32
to the configure command line.
64-bit Backward-Compatible Build on 64-bit OS X
-----------------------------------------------
Add
--host x86_64-apple-darwin NASM=/opt/local/bin/nasm \
CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-mmacosx-version-min=10.4 -O3' \
LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-mmacosx-version-min=10.4'
to the configure command line. The OS X 10.4 SDK, and NASM 2.07 or later from
MacPorts, must be installed.
32-bit Backward-Compatible Build on OS X
----------------------------------------
Add
--host i686-apple-darwin \
CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-mmacosx-version-min=10.4 -O3 -m32' \
LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-mmacosx-version-min=10.4 -m32'
to the configure command line. The OS X 10.4 SDK must be installed.
64-bit Library Build on 64-bit Solaris
--------------------------------------
Add
--host x86_64-pc-solaris CFLAGS='-O3 -m64' LDFLAGS=-m64
to the configure command line.
32-bit Build on 64-bit FreeBSD
------------------------------
Add
--host i386-unknown-freebsd CC='gcc -B /usr/lib32' CFLAGS='-O3 -m32' \
LDFLAGS='-B/usr/lib32'
to the configure command line. NASM 2.07 or later from FreeBSD ports must be
installed.
Oracle Solaris Studio
---------------------
Add
CC=cc
to the configure command line. libjpeg-turbo will automatically be built with
the maximum optimization level (-xO5) unless you override CFLAGS.
To build a 64-bit version of libjpeg-turbo using Oracle Solaris Studio, add
--host x86_64-pc-solaris CC=cc CFLAGS='-xO5 -m64' LDFLAGS=-m64
to the configure command line.
MinGW Build on Cygwin
---------------------
Use CMake (see recipes below)
===========
ARM Support
===========
This release of libjpeg-turbo can use ARM NEON SIMD instructions to accelerate
JPEG compression/decompression by approximately 2-4x on ARMv7 and later
platforms. If libjpeg-turbo is configured on an ARM Linux platform, then the
build system will automatically include the NEON SIMD routines, if they are
supported.
Building libjpeg-turbo for iOS
------------------------------
iOS platforms, such as the iPhone and iPad, also use ARM processors, some of
which support NEON instructions. Additional steps are required to build
libjpeg-turbo for these platforms. The steps below assume iOS SDK v4.3. If
you are using a different SDK version, then you will need to modify the
examples accordingly.
Additional build requirements:
gas-preprocessor.pl (https://github.com/yuvi/gas-preprocessor) should be
installed in your PATH.
Set the following shell variables for simplicity:
Xcode 3.2.x / iOS 4.3 SDK:
IOS_PLATFORMDIR="/Developer/Platforms/iPhoneOS.platform"
IOS_SYSROOT="$IOS_PLATFORMDIR/Developer/SDKs/iPhoneOS4.3.sdk"
IOS_GCC="$IOS_PLATFORMDIR/Developer/usr/bin/arm-apple-darwin10-llvm-gcc-4.2"
Xcode 4.5.x / iOS 6.0 SDK:
IOS_PLATFORMDIR="/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform"
IOS_SYSROOT="$IOS_PLATFORMDIR/Developer/SDKs/iPhoneOS6.0.sdk"
IOS_GCC="$IOS_PLATFORMDIR/Developer/usr/bin/arm-apple-darwin10-llvm-gcc-4.2"
ARM v6 only (up to and including iPhone 3G):
[NOTE: Requires Xcode 4.4.x or earlier]
IOS_CFLAGS="-march=armv6 -mcpu=arm1176jzf-s -mfpu=vfp"
ARM v7 only (iPhone 3GS-4S, iPad 1st-3rd Generation):
IOS_CFLAGS="-march=armv7 -mcpu=cortex-a8 -mtune=cortex-a8 -mfpu=neon"
ARM v7s only (iPhone 5, iPad 4th Generation):
[NOTE: Requires Xcode 4.5 or later]
IOS_CFLAGS="-march=armv7s -mcpu=swift -mtune=swift -mfpu=neon"
Follow the procedure under "Building libjpeg-turbo" above, adding
--host arm-apple-darwin10 --enable-static --disable-shared \
CC="$IOS_GCC" LD="$IOS_GCC" \
CFLAGS="-mfloat-abi=softfp -isysroot $IOS_SYSROOT -O3 $IOS_CFLAGS" \
LDFLAGS="-mfloat-abi=softfp -isysroot $IOS_SYSROOT $IOS_CFLAGS"
to the configure command line.
Once built, lipo can be used to combine the ARM v6, v7, and/or v7s variants
into a universal library.
*******************************************************************************
** Building on Windows (Visual C++ or MinGW)
*******************************************************************************
==================
Build Requirements
==================
-- CMake (http://www.cmake.org) v2.6 or later
-- Microsoft Visual C++ 2005 or later
If you don't already have Visual C++, then the easiest way to get it is by
installing the Windows SDK:
http://msdn.microsoft.com/en-us/windows/bb980924.aspx
The Windows SDK includes both 32-bit and 64-bit Visual C++ compilers and
everything necessary to build libjpeg-turbo.
* For 32-bit builds, you can also use Microsoft Visual C++ Express
Edition. Visual C++ Express Edition is a free download.
* If you intend to build libjpeg-turbo from the command line, then add the
appropriate compiler and SDK directories to the INCLUDE, LIB, and PATH
environment variables. This is generally accomplished by executing
vcvars32.bat or vcvars64.bat and SetEnv.cmd. vcvars32.bat and
vcvars64.bat are part of Visual C++ and are located in the same directory
as the compiler. SetEnv.cmd is part of the Windows SDK. You can pass
optional arguments to SetEnv.cmd to specify a 32-bit or 64-bit build
environment.
... OR ...
-- MinGW
GCC v4.1 or later recommended for best performance
-- NASM (http://www.nasm.us/) 0.98 or later (NASM 2.05 or later is required for
a 64-bit build)
-- If building the TurboJPEG Java wrapper, JDK 1.5 or later is required. This
can be downloaded from http://www.java.com.
==================
Out-of-Tree Builds
==================
Binary objects, libraries, and executables are generated in the same directory
from which cmake was executed (the "binary directory"), and this directory need
not necessarily be the same as the libjpeg-turbo source directory. You can
create multiple independent binary directories, in which different versions of
libjpeg-turbo can be built from the same source tree using different compilers
or settings. In the sections below, {build_directory} refers to the binary
directory, whereas {source_directory} refers to the libjpeg-turbo source
directory. For in-tree builds, these directories are the same.
======================
Building libjpeg-turbo
======================
Visual C++ (Command Line)
-------------------------
cd {build_directory}
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release {source_directory}
nmake
This will build either a 32-bit or a 64-bit version of libjpeg-turbo, depending
on which version of cl.exe is in the PATH.
The following files will be generated under {build_directory}:
jpeg-static.lib
Static link library for the libjpeg API
sharedlib/jpeg{version}.dll
DLL for the libjpeg API
sharedlib/jpeg.lib
Import library for the libjpeg API
turbojpeg-static.lib
Static link library for the TurboJPEG API
turbojpeg.dll
DLL for the TurboJPEG API
turbojpeg.lib
Import library for the TurboJPEG API
{version} is 62, 7, or 8, depending on whether libjpeg v6b (default), v7, or
v8 emulation is enabled.
Visual C++ (IDE)
----------------
Choose the appropriate CMake generator option for your version of Visual Studio
(run "cmake" with no arguments for a list of available generators.) For
instance:
cd {build_directory}
cmake -G "Visual Studio 9 2008" {source_directory}
You can then open ALL_BUILD.vcproj in Visual Studio and build one of the
configurations in that project ("Debug", "Release", etc.) to generate a full
build of libjpeg-turbo.
This will generate the following files under {build_directory}:
{configuration}/jpeg-static.lib
Static link library for the libjpeg API
sharedlib/{configuration}/jpeg{version}.dll
DLL for the libjpeg API
sharedlib/{configuration}/jpeg.lib
Import library for the libjpeg API
{configuration}/turbojpeg-static.lib
Static link library for the TurboJPEG API
{configuration}/turbojpeg.dll
DLL for the TurboJPEG API
{configuration}/turbojpeg.lib
Import library for the TurboJPEG API
{configuration} is Debug, Release, RelWithDebInfo, or MinSizeRel, depending on
the configuration you built in the IDE, and {version} is 62, 7, or 8,
depending on whether libjpeg v6b (default), v7, or v8 emulation is enabled.
MinGW
-----
cd {build_directory}
cmake -G "MSYS Makefiles" {source_directory}
make
This will generate the following files under {build_directory}
libjpeg.a
Static link library for the libjpeg API
sharedlib/libjpeg-{version}.dll
DLL for the libjpeg API
sharedlib/libjpeg.dll.a
Import library for the libjpeg API
libturbojpeg.a
Static link library for the TurboJPEG API
libturbojpeg.dll
DLL for the TurboJPEG API
libturbojpeg.dll.a
Import library for the TurboJPEG API
{version} is 62, 7, or 8, depending on whether libjpeg v6b (default), v7, or
v8 emulation is enabled.
Debug Build
-----------
Add "-DCMAKE_BUILD_TYPE=Debug" to the cmake command line. Or, if building with
NMake, remove "-DCMAKE_BUILD_TYPE=Release" (Debug builds are the default with
NMake.)
libjpeg v7 or v8 API/ABI Emulation
-----------------------------------
Add "-DWITH_JPEG7=1" to the cmake command line to build a version of
libjpeg-turbo that is API/ABI-compatible with libjpeg v7. Add "-DWITH_JPEG8=1"
to the cmake command to build a version of libjpeg-turbo that is
API/ABI-compatible with libjpeg v8. See README-turbo.txt for more information
on libjpeg v7 and v8 emulation.
In-Memory Source/Destination Managers
-------------------------------------
When using libjpeg v6b or v7 API/ABI emulation, add -DWITH_MEM_SRCDST=0 to the
CMake command line to build a version of libjpeg-turbo that lacks the
jpeg_mem_src() and jpeg_mem_dest() functions. These functions were not part of
the original libjpeg v6b and v7 APIs, so removing them ensures strict
conformance with those APIs. See README-turbo.txt for more information.
Arithmetic Coding Support
-------------------------
Since the patent on arithmetic coding has expired, this functionality has been
included in this release of libjpeg-turbo. libjpeg-turbo's implementation is
based on the implementation in libjpeg v8, but it works when emulating libjpeg
v7 or v6b as well. The default is to enable both arithmetic encoding and
decoding, but those who have philosophical objections to arithmetic coding can
add "-DWITH_ARITH_ENC=0" or "-DWITH_ARITH_DEC=0" to the cmake command line to
disable encoding or decoding (respectively.)
TurboJPEG Java Wrapper
----------------------
Add "-DWITH_JAVA=1" to the cmake command line to incorporate an optional Java
Native Interface wrapper into the TurboJPEG shared library and build the Java
front-end classes to support it. This allows the TurboJPEG shared library to
be used directly from Java applications. See java/README for more details.
If you are using CMake 2.8, you can set the Java_JAVAC_EXECUTABLE,
Java_JAVA_EXECUTABLE, and Java_JAR_EXECUTABLE CMake variables to specify
alternate commands or locations for javac, jar, and java (respectively.) If
you are using CMake 2.6, set JAVA_COMPILE, JAVA_RUNTIME, and JAVA_ARCHIVE
instead. You can also set the JAVACFLAGS CMake variable to specify arguments
that should be passed to the Java compiler when building the front-end classes.
========================
Installing libjpeg-turbo
========================
You can use the build system to install libjpeg-turbo into a directory of your
choosing (as opposed to creating an installer.) To do this, add:
-DCMAKE_INSTALL_PREFIX={install_directory}
to the cmake command line.
For example,
cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release \
-DCMAKE_INSTALL_PREFIX=c:\libjpeg-turbo {source_directory}
nmake install
will install the header files in c:\libjpeg-turbo\include, the library files
in c:\libjpeg-turbo\lib, the DLL's in c:\libjpeg-turbo\bin, and the
documentation in c:\libjpeg-turbo\doc.
=============
Build Recipes
=============
64-bit MinGW Build on Cygwin
----------------------------
cd {build_directory}
CC=/usr/bin/x86_64-w64-mingw32-gcc \
cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
-DCMAKE_AR=/usr/bin/x86_64-w64-mingw32-ar \
-DCMAKE_RANLIB=/usr/bin/x86_64-w64-mingw32-ranlib {source_directory}
make
This produces a 64-bit build of libjpeg-turbo that does not depend on
cygwin1.dll or other Cygwin DLL's. The mingw64-x86_64-gcc-core and
mingw64-x86_64-gcc-g++ packages (and their dependencies) must be installed.
32-bit MinGW Build on Cygwin
----------------------------
cd {build_directory}
CC=/usr/bin/i686-w64-mingw32-gcc \
cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
-DDCMAKE_AR=/usr/bin/i686-w64-mingw32-ar \
-DCMAKE_RANLIB=/usr/bin/i686-w64-mingw32-ranlib {source_directory}
make
This produces a 32-bit build of libjpeg-turbo that does not depend on
cygwin1.dll or other Cygwin DLL's. The mingw64-i686-gcc-core and
mingw64-i686-gcc-g++ packages (and their dependencies) must be installed.
MinGW-w64 Build on Windows
--------------------------
This produces a 64-bit build of libjpeg-turbo using the "native" MinGW-w64
toolchain (which is faster than the Cygwin version):
cd {build_directory}
CC={mingw-w64_binary_path}/x86_64-w64-mingw32-gcc \
cmake -G "MSYS Makefiles" \
-DCMAKE_AR={mingw-w64_binary_path}/x86_64-w64-mingw32-ar \
-DCMAKE_RANLIB={mingw-w64_binary_path}/x86_64-w64-mingw32-ranlib \
{source_directory}
make
MinGW Build on Linux
--------------------
cd {build_directory}
CC={mingw_binary_path}/i386-mingw32-gcc \
cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
-DCMAKE_AR={mingw_binary_path}/i386-mingw32-ar \
-DCMAKE_RANLIB={mingw_binary_path}/i386-mingw32-ranlib \
{source_directory}
make
*******************************************************************************
** Creating Release Packages
*******************************************************************************
The following commands can be used to create various types of release packages:
Unix
----
make rpm
Create Red Hat-style binary RPM package. Requires RPM v4 or later.
make srpm
This runs 'make dist' to create a pristine source tarball, then creates a
Red Hat-style source RPM package from the tarball. Requires RPM v4 or later.
make deb
Create Debian-style binary package. Requires dpkg.
make dmg
Create Macintosh package/disk image. This requires the PackageMaker
application, which must be installed in /Developer/Applications/Utilities.
make udmg [BUILDDIR32={32-bit build directory}]
On 64-bit OS X systems, this creates a Macintosh package and disk image that
contains universal i386/x86-64 binaries. You should first configure a 32-bit
out-of-tree build of libjpeg-turbo, then configure a 64-bit out-of-tree
build, then run 'make udmg' from the 64-bit build directory. The build
system will look for the 32-bit build under {source_directory}/osxx86 by
default, but you can override this by setting the BUILDDIR32 variable on the
make command line as shown above.
make iosdmg [BUILDDIR32={32-bit build directory}] \
[BUILDDIRARMV6={ARM v6 build directory}] \
[BUILDDIRARMV7={ARM v7 build directory}] \
[BUILDDIRARMV7S={ARM v7s build directory}]
On OS X systems, this creates a Macintosh package and disk image in which the
libjpeg-turbo static libraries contain ARM architectures necessary to build
iOS applications. If building on an x86-64 system, the binaries will also
contain the i386 architecture, as with 'make udmg' above. You should first
configure ARM v6, ARM v7, and/or ARM v7s out-of-tree builds of libjpeg-turbo
(see "Building libjpeg-turbo for iOS" above.) If you are building an x86-64
version of libjpeg-turbo, you should configure a 32-bit out-of-tree build as
well. Next, build libjpeg-turbo as you would normally, using an out-of-tree
build. When it is built, run 'make iosdmg' from the build directory. The
build system will look for the ARM v6 build under {source_directory}/iosarmv6
by default, the ARM v7 build under {source_directory}/iosarmv7 by default,
the ARM v7s build under {source_directory}/iosarmv7s by default, and (if
applicable) the 32-bit build under {source_directory}/osxx86 by default, but
you can override this by setting the BUILDDIR32, BUILDDIRARMV6,
BUILDDIRARMV7, and/or BUILDDIRARMV7S variables on the make command line as
shown above.
make cygwinpkg
Build a Cygwin binary package.
Windows
-------
If using NMake:
cd {build_directory}
nmake installer
If using MinGW:
cd {build_directory}
make installer
If using the Visual Studio IDE, build the "installer" project.
The installer package (libjpeg-turbo[-gcc][64].exe) will be located under
{build_directory}. If building using the Visual Studio IDE, then the installer
package will be located in a subdirectory with the same name as the
configuration you built (such as {build_directory}\Debug\ or
{build_directory}\Release\).
Building a Windows installer requires the Nullsoft Install System
(http://nsis.sourceforge.net/.) makensis.exe should be in your PATH.
*******************************************************************************
** Regression testing
*******************************************************************************
The most common way to test libjpeg-turbo is by invoking 'make test' on
Unix/Linux platforms or 'ctest' on Windows platforms, once the build has
completed. This runs a series of tests to ensure that mathematical
compatibility has been maintained between libjpeg-turbo and libjpeg v6b. This
also invokes the TurboJPEG unit tests, which ensure that the colorspace
extensions, YUV encoding, decompression scaling, and other features of the
TurboJPEG C and Java APIs are working properly (and, by extension, that the
equivalent features of the underlying libjpeg API are also working.)
Invoking 'make testclean' or 'nmake testclean' (if using NMake) or building
the 'testclean' target (if using the Visual Studio IDE) will clean up the
output images generated by 'make test'.
On Unix/Linux platforms, more extensive tests of the TurboJPEG C and Java
wrappers can be run by invoking 'make tjtest'. These extended TurboJPEG tests
essentially iterate through all of the available features of the TurboJPEG APIs
that are not covered by the TurboJPEG unit tests (this includes the lossless
transform options) and compare the images generated by each feature to images
generated using the equivalent feature in the libjpeg API. The extended
TurboJPEG tests are meant to test for regressions in the TurboJPEG wrappers,
not in the underlying libjpeg API library.

939
CMakeLists.txt
View File

File diff suppressed because it is too large Load Diff

1036
ChangeLog.md Normal file
View File

File diff suppressed because it is too large Load Diff

384
ChangeLog.txt
View File

@@ -1,384 +0,0 @@
1.2.90 (1.3 beta1)
==================
[1] Added support for additional scaling factors (3/8, 5/8, 3/4, 7/8, 9/8, 5/4,
11/8, 3/2, 13/8, 7/4, 15/8, and 2) when decompressing. Note that the IDCT will
not be SIMD-accelerated when using any of these new scaling factors.
[2] The TurboJPEG dynamic library is now versioned. It was not strictly
necessary to do so, because TurboJPEG uses versioned symbols, and if a function
changes in an ABI-incompatible way, that function is renamed and a legacy
function is provided to maintain backward compatibility. However, certain
Linux distro maintainers will blindly reject any library that is not versioned,
so this was an attempt to make them happy.
[3] Extended the TurboJPEG Java API so that it can be used to compress a JPEG
image from and decompress a JPEG image to an arbitrary position in a large
image buffer.
[4] The tjDecompressToYUV() function now supports the TJFLAG_FASTDCT flag.
[5] The 32-bit supplementary package for amd64 Debian systems now provides
symlinks in /usr/lib/i386-linux-gnu for the TurboJPEG libraries in /usr/lib32.
This allows those libraries to be used on MultiArch-compatible systems (such as
Ubuntu 11 and later) without setting the linker path.
[6] The TurboJPEG Java wrapper should now find the JNI library on Mac systems
without having to pass -Djava.library.path=/usr/lib to java.
[7] TJBench has been ported to Java to provide a convenient way of validating
the performance of the TurboJPEG Java API. It can be run with
'java -cp turbojpeg.jar TJBench'.
[8] cjpeg can now be used to generate JPEG files with the RGB colorspace
(feature ported from jpeg-8d.)
[9] The width and height in the -crop argument passed to jpegtran can now be
suffixed with "f" to indicate that, when the upper left corner of the cropping
region is automatically moved to the nearest iMCU boundary, the bottom right
corner should be moved by the same amount. In other words, this feature causes
jpegtran to strictly honor the specified width/height rather than the specified
bottom right corner (feature ported from jpeg-8d.)
[10] JPEG files using the RGB colorspace can now be decompressed into grayscale
images (feature ported from jpeg-8d.)
[11] Fixed a regression caused by 1.2.1[7] whereby the build would fail with
multiple "Mismatch in operand sizes" errors when attempting to build the x86
SIMD code with NASM 0.98.
[12] The in-memory source/destination managers (jpeg_mem_src() and
jpeg_mem_dest()) are now included by default when building libjpeg-turbo with
libjpeg v6b or v7 emulation, so that programs can take advantage of these
functions without requiring the use of the backward-incompatible libjpeg v8
ABI. The "age number" of the libjpeg-turbo library on Un*x systems has been
incremented by 1 to reflect this. You can disable this feature with a
configure/CMake switch in order to retain strict API/ABI compatibility with the
libjpeg v6b or v7 API/ABI (or with previous versions of libjpeg-turbo.) See
README-turbo.txt for more details.
[13] Added ARM v7s architecture to libjpeg.a and libturbojpeg.a in the official
libjpeg-turbo binary package for OS X, so that those libraries can be used to
build applications that leverage the faster CPUs in the iPhone 5 and iPad 4.
1.2.1
=====
[1] Creating or decoding a JPEG file that uses the RGB colorspace should now
properly work when the input or output colorspace is one of the libjpeg-turbo
colorspace extensions.
[2] When libjpeg-turbo was built without SIMD support and merged (non-fancy)
upsampling was used along with an alpha-enabled colorspace during
decompression, the unused byte of the decompressed pixels was not being set to
0xFF. This has been fixed. TJUnitTest has also been extended to test for the
correct behavior of the colorspace extensions when merged upsampling is used.
[3] Fixed a bug whereby the libjpeg-turbo SSE2 SIMD code would not preserve the
upper 64 bits of xmm6 and xmm7 on Win64 platforms, which violated the Win64
calling conventions.
[4] Fixed a regression caused by 1.2.0[6] whereby decompressing corrupt JPEG
images (specifically, images in which the component count was erroneously set
to a large value) would cause libjpeg-turbo to segfault.
[5] Worked around a severe performance issue with "Bobcat" (AMD Embedded APU)
processors. The MASKMOVDQU instruction, which was used by the libjpeg-turbo
SSE2 SIMD code, is apparently implemented in microcode on AMD processors, and
it is painfully slow on Bobcat processors in particular. Eliminating the use
of this instruction improved performance by an order of magnitude on Bobcat
processors and by a small amount (typically 5%) on AMD desktop processors.
[6] Added SIMD acceleration for performing 4:2:2 upsampling on NEON-capable ARM
platforms. This speeds up the decompression of 4:2:2 JPEGs by 20-25% on such
platforms.
[7] Fixed a regression caused by 1.2.0[2] whereby, on Linux/x86 platforms
running the 32-bit SSE2 SIMD code in libjpeg-turbo, decompressing a 4:2:0 or
4:2:2 JPEG image into a 32-bit (RGBX, BGRX, etc.) buffer without using fancy
upsampling would produce several incorrect columns of pixels at the right-hand
side of the output image if each row in the output image was not evenly
divisible by 16 bytes.
[8] Fixed an issue whereby attempting to build the SIMD extensions with Xcode
4.3 on OS X platforms would cause NASM to return numerous errors of the form
"'%define' expects a macro identifier".
[9] Added flags to the TurboJPEG API that allow the caller to force the use of
either the fast or the accurate DCT/IDCT algorithms in the underlying codec.
1.2.0
=====
[1] Fixed build issue with YASM on Unix systems (the libjpeg-turbo build system
was not adding the current directory to the assembler include path, so YASM
was not able to find jsimdcfg.inc.)
[2] Fixed out-of-bounds read in SSE2 SIMD code that occurred when decompressing
a JPEG image to a bitmap buffer whose size was not a multiple of 16 bytes.
This was more of an annoyance than an actual bug, since it did not cause any
actual run-time problems, but the issue showed up when running libjpeg-turbo in
valgrind. See http://crbug.com/72399 for more information.
[3] Added a compile-time macro (LIBJPEG_TURBO_VERSION) that can be used to
check the version of libjpeg-turbo against which an application was compiled.
[4] Added new RGBA/BGRA/ABGR/ARGB colorspace extension constants (libjpeg API)
and pixel formats (TurboJPEG API), which allow applications to specify that,
when decompressing to a 4-component RGB buffer, the unused byte should be set
to 0xFF so that it can be interpreted as an opaque alpha channel.
[5] Fixed regression issue whereby DevIL failed to build against libjpeg-turbo
because libjpeg-turbo's distributed version of jconfig.h contained an INLINE
macro, which conflicted with a similar macro in DevIL. This macro is used only
internally when building libjpeg-turbo, so it was moved into config.h.
[6] libjpeg-turbo will now correctly decompress erroneous CMYK/YCCK JPEGs whose
K component is assigned a component ID of 1 instead of 4. Although these files
are in violation of the spec, other JPEG implementations handle them
correctly.
[7] Added ARM v6 and ARM v7 architectures to libjpeg.a and libturbojpeg.a in
the official libjpeg-turbo binary package for OS X, so that those libraries can
be used to build both OS X and iOS applications.
1.1.90 (1.2 beta1)
==================
[1] Added a Java wrapper for the TurboJPEG API. See java/README for more
details.
[2] The TurboJPEG API can now be used to scale down images during
decompression.
[3] Added SIMD routines for RGB-to-grayscale color conversion, which
significantly improves the performance of grayscale JPEG compression from an
RGB source image.
[4] Improved the performance of the C color conversion routines, which are used
on platforms for which SIMD acceleration is not available.
[5] Added a function to the TurboJPEG API that performs lossless transforms.
This function is implemented using the same back end as jpegtran, but it
performs transcoding entirely in memory and allows multiple transforms and/or
crop operations to be batched together, so the source coefficients only need to
be read once. This is useful when generating image tiles from a single source
JPEG.
[6] Added tests for the new TurboJPEG scaled decompression and lossless
transform features to tjbench (the TurboJPEG benchmark, formerly called
"jpgtest".)
[7] Added support for 4:4:0 (transposed 4:2:2) subsampling in TurboJPEG, which
was necessary in order for it to read 4:2:2 JPEG files that had been losslessly
transposed or rotated 90 degrees.
[8] All legacy VirtualGL code has been re-factored, and this has allowed
libjpeg-turbo, in its entirety, to be re-licensed under a BSD-style license.
[9] libjpeg-turbo can now be built with YASM.
[10] Added SIMD acceleration for ARM Linux and iOS platforms that support
NEON instructions.
[11] Refactored the TurboJPEG C API and documented it using Doxygen. The
TurboJPEG 1.2 API uses pixel formats to define the size and component order of
the uncompressed source/destination images, and it includes a more efficient
version of TJBUFSIZE() that computes a worst-case JPEG size based on the level
of chrominance subsampling. The refactored implementation of the TurboJPEG API
now uses the libjpeg memory source and destination managers, which allows the
TurboJPEG compressor to grow the JPEG buffer as necessary.
[12] Eliminated errors in the output of jpegtran on Windows that occurred when
the application was invoked using I/O redirection
(jpegtran <input.jpg >output.jpg).
[13] The inclusion of libjpeg v7 and v8 emulation as well as arithmetic coding
support in libjpeg-turbo v1.1.0 introduced several new error constants in
jerror.h, and these were mistakenly enabled for all emulation modes, causing
the error enum in libjpeg-turbo to sometimes have different values than the
same enum in libjpeg. This represents an ABI incompatibility, and it caused
problems with rare applications that took specific action based on a particular
error value. The fix was to include the new error constants conditionally
based on whether libjpeg v7 or v8 emulation was enabled.
[14] Fixed an issue whereby Windows applications that used libjpeg-turbo would
fail to compile if the Windows system headers were included before jpeglib.h.
This issue was caused by a conflict in the definition of the INT32 type.
[15] Fixed 32-bit supplementary package for amd64 Debian systems, which was
broken by enhancements to the packaging system in 1.1.
[16] When decompressing a JPEG image using an output colorspace of
JCS_EXT_RGBX, JCS_EXT_BGRX, JCS_EXT_XBGR, or JCS_EXT_XRGB, libjpeg-turbo will
now set the unused byte to 0xFF, which allows applications to interpret that
byte as an alpha channel (0xFF = opaque).
1.1.1
=====
[1] Fixed a 1-pixel error in row 0, column 21 of the luminance plane generated
by tjEncodeYUV().
[2] libjpeg-turbo's accelerated Huffman decoder previously ignored unexpected
markers found in the middle of the JPEG data stream during decompression. It
will now hand off decoding of a particular block to the unaccelerated Huffman
decoder if an unexpected marker is found, so that the unaccelerated Huffman
decoder can generate an appropriate warning.
[3] Older versions of MinGW64 prefixed symbol names with underscores by
default, which differed from the behavior of 64-bit Visual C++. MinGW64 1.0
has adopted the behavior of 64-bit Visual C++ as the default, so to accommodate
this, the libjpeg-turbo SIMD function names are no longer prefixed with an
underscore when building with MinGW64. This means that, when building
libjpeg-turbo with older versions of MinGW64, you will now have to add
-fno-leading-underscore to the CFLAGS.
[4] Fixed a regression bug in the NSIS script that caused the Windows installer
build to fail when using the Visual Studio IDE.
[5] Fixed a bug in jpeg_read_coefficients() whereby it would not initialize
cinfo->image_width and cinfo->image_height if libjpeg v7 or v8 emulation was
enabled. This specifically caused the jpegoptim program to fail if it was
linked against a version of libjpeg-turbo that was built with libjpeg v7 or v8
emulation.
[6] Eliminated excessive I/O overhead that occurred when reading BMP files in
cjpeg.
[7] Eliminated errors in the output of cjpeg on Windows that occurred when the
application was invoked using I/O redirection (cjpeg <inputfile >output.jpg).
1.1.0
=====
[1] The algorithm used by the SIMD quantization function cannot produce correct
results when the JPEG quality is >= 98 and the fast integer forward DCT is
used. Thus, the non-SIMD quantization function is now used for those cases,
and libjpeg-turbo should now produce identical output to libjpeg v6b in all
cases.
[2] Despite the above, the fast integer forward DCT still degrades somewhat for
JPEG qualities greater than 95, so the TurboJPEG wrapper will now automatically
use the slow integer forward DCT when generating JPEG images of quality 96 or
greater. This reduces compression performance by as much as 15% for these
high-quality images but is necessary to ensure that the images are perceptually
lossless. It also ensures that the library can avoid the performance pitfall
created by [1].
[3] Ported jpgtest.cxx to pure C to avoid the need for a C++ compiler.
[4] Fixed visual artifacts in grayscale JPEG compression caused by a typo in
the RGB-to-luminance lookup tables.
[5] The Windows distribution packages now include the libjpeg run-time programs
(cjpeg, etc.)
[6] All packages now include jpgtest.
[7] The TurboJPEG dynamic library now uses versioned symbols.
[8] Added two new TurboJPEG API functions, tjEncodeYUV() and
tjDecompressToYUV(), to replace the somewhat hackish TJ_YUV flag.
1.0.90 (1.1 beta1)
==================
[1] Added emulation of the libjpeg v7 and v8 APIs and ABIs. See
README-turbo.txt for more details. This feature was sponsored by CamTrace SAS.
[2] Created a new CMake-based build system for the Visual C++ and MinGW builds.
[3] Grayscale bitmaps can now be compressed from/decompressed to using the
TurboJPEG API.
[4] jpgtest can now be used to test decompression performance with existing
JPEG images.
[5] If the default install prefix (/opt/libjpeg-turbo) is used, then
'make install' now creates /opt/libjpeg-turbo/lib32 and
/opt/libjpeg-turbo/lib64 sym links to duplicate the behavior of the binary
packages.
[6] All symbols in the libjpeg-turbo dynamic library are now versioned, even
when the library is built with libjpeg v6b emulation.
[7] Added arithmetic encoding and decoding support (can be disabled with
configure or CMake options)
[8] Added a TJ_YUV flag to the TurboJPEG API, which causes both the compressor
and decompressor to output planar YUV images.
[9] Added an extended version of tjDecompressHeader() to the TurboJPEG API,
which allows the caller to determine the type of subsampling used in a JPEG
image.
[10] Added further protections against invalid Huffman codes.
1.0.1
=====
[1] The Huffman decoder will now handle erroneous Huffman codes (for instance,
from a corrupt JPEG image.) Previously, these would cause libjpeg-turbo to
crash under certain circumstances.
[2] Fixed typo in SIMD dispatch routines that was causing 4:2:2 upsampling to
be used instead of 4:2:0 when decompressing JPEG images using SSE2 code.
[3] configure script will now automatically determine whether the
INCOMPLETE_TYPES_BROKEN macro should be defined.
1.0.0
=====
[1] 2983700: Further FreeBSD build tweaks (no longer necessary to specify
--host when configuring on a 64-bit system)
[2] Created symlinks in the Unix/Linux packages so that the TurboJPEG
include file can always be found in /opt/libjpeg-turbo/include, the 32-bit
static libraries can always be found in /opt/libjpeg-turbo/lib32, and the
64-bit static libraries can always be found in /opt/libjpeg-turbo/lib64.
[3] The Unix/Linux distribution packages now include the libjpeg run-time
programs (cjpeg, etc.) and man pages.
[4] Created a 32-bit supplementary package for amd64 Debian systems, which
contains just the 32-bit libjpeg-turbo libraries.
[5] Moved the libraries from */lib32 to */lib in the i386 Debian package.
[6] Include distribution package for Cygwin
[7] No longer necessary to specify --without-simd on non-x86 architectures, and
unit tests now work on those architectures.
0.0.93
======
[1] 2982659, Fixed x86-64 build on FreeBSD systems
[2] 2988188: Added support for Windows 64-bit systems
0.0.91
======
[1] Added documentation to .deb packages
[2] 2968313: Fixed data corruption issues when decompressing large JPEG images
and/or using buffered I/O with the libjpeg-turbo decompressor
0.0.90
======
Initial release

88
LICENSE.md Normal file
View File

@@ -0,0 +1,88 @@
libjpeg-turbo Licenses
======================
libjpeg-turbo is covered by three compatible BSD-style open source licenses:
- The IJG (Independent JPEG Group) License, which is listed in
[README.ijg](README.ijg)
This license applies to the libjpeg API library and associated programs
(any code inherited from libjpeg, and any modifications to that code.)
- The Modified (3-clause) BSD License, which is listed in
[turbojpeg.c](turbojpeg.c)
This license covers the TurboJPEG API library and associated programs.
- The zlib License, which is listed in [simd/jsimdext.inc](simd/jsimdext.inc)
This license is a subset of the other two, and it covers the libjpeg-turbo
SIMD extensions.
Complying with the libjpeg-turbo Licenses
=========================================
This section provides a roll-up of the libjpeg-turbo licensing terms, to the
best of our understanding.
1. If you are distributing a modified version of the libjpeg-turbo source,
then:
1. You cannot alter or remove any existing copyright or license notices
from the source.
**Origin**
- Clause 1 of the IJG License
- Clause 1 of the Modified BSD License
- Clauses 1 and 3 of the zlib License
2. You must add your own copyright notice to the header of each source
file you modified, so others can tell that you modified that file (if
there is not an existing copyright header in that file, then you can
simply add a notice stating that you modified the file.)
**Origin**
- Clause 1 of the IJG License
- Clause 2 of the zlib License
3. You must include the IJG README file, and you must not alter any of the
copyright or license text in that file.
**Origin**
- Clause 1 of the IJG License
2. If you are distributing only libjpeg-turbo binaries without the source, or
if you are distributing an application that statically links with
libjpeg-turbo, then:
1. Your product documentation must include a message stating:
This software is based in part on the work of the Independent JPEG
Group.
**Origin**
- Clause 2 of the IJG license
2. If your binary distribution includes or uses the TurboJPEG API, then
your product documentation must include the text of the Modified BSD
License.
**Origin**
- Clause 2 of the Modified BSD License
3. You cannot use the name of the IJG or The libjpeg-turbo Project or the
contributors thereof in advertising, publicity, etc.
**Origin**
- IJG License
- Clause 3 of the Modified BSD License
4. The IJG and The libjpeg-turbo Project do not warrant libjpeg-turbo to be
free of defects, nor do we accept any liability for undesirable
consequences resulting from your use of the software.
**Origin**
- IJG License
- Modified BSD License
- zlib License

688
Makefile.am
View File

@@ -4,15 +4,21 @@ include_HEADERS = jerror.h jmorecfg.h jpeglib.h
if WITH_TURBOJPEG
lib_LTLIBRARIES += libturbojpeg.la
libturbojpeg_la_LDFLAGS = -version-info 0:0 -no-undefined
libturbojpeg_la_LDFLAGS = -version-info 1:0:1 -no-undefined
include_HEADERS += turbojpeg.h
endif
nodist_include_HEADERS = jconfig.h
pkgconfigdir = $(libdir)/pkgconfig
pkgconfig_DATA = pkgscripts/libjpeg.pc
if WITH_TURBOJPEG
pkgconfig_DATA += pkgscripts/libturbojpeg.pc
endif
HDRS = jchuff.h jdct.h jdhuff.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
jpegint.h jpeglib.h jversion.h jsimd.h jsimddct.h jpegcomp.h
jpegint.h jpeglib.h jversion.h jsimd.h jsimddct.h jpegcomp.h \
jpeg_nbits_table.h
libjpeg_la_SOURCES = $(HDRS) jcapimin.c jcapistd.c jccoefct.c jccolor.c \
jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
@@ -107,21 +113,34 @@ tjunittest_LDADD = libturbojpeg.la
endif
cjpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c cjpeg.c rdbmp.c rdgif.c \
rdppm.c rdswitch.c rdtarga.c
cjpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c cjpeg.c rdgif.c rdppm.c rdswitch.c
if WITH_12BIT
else
cjpeg_SOURCES += rdbmp.c rdtarga.c
endif
cjpeg_LDADD = libjpeg.la
cjpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
-DTARGA_SUPPORTED
cjpeg_CFLAGS = -DGIF_SUPPORTED -DPPM_SUPPORTED
if WITH_12BIT
else
cjpeg_CFLAGS += -DBMP_SUPPORTED -DTARGA_SUPPORTED
endif
djpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c djpeg.c rdcolmap.c rdswitch.c \
wrbmp.c wrgif.c wrppm.c wrtarga.c
wrgif.c wrppm.c
if WITH_12BIT
else
djpeg_SOURCES += wrbmp.c wrtarga.c
endif
djpeg_LDADD = libjpeg.la
djpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
-DTARGA_SUPPORTED
djpeg_CFLAGS = -DGIF_SUPPORTED -DPPM_SUPPORTED
if WITH_12BIT
else
djpeg_CFLAGS += -DBMP_SUPPORTED -DTARGA_SUPPORTED
endif
jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c transupp.h
@@ -141,136 +160,498 @@ jcstest_LDADD = libjpeg.la
dist_man1_MANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
DOCS= coderules.txt jconfig.txt change.log rdrle.c wrrle.c BUILDING.txt \
ChangeLog.txt
DOCS= coderules.txt jconfig.txt change.log rdrle.c wrrle.c BUILDING.md \
ChangeLog.md
docdir = $(datadir)/doc
dist_doc_DATA = README README-turbo.txt libjpeg.txt structure.txt usage.txt \
wizard.txt
dist_doc_DATA = README.ijg README.md libjpeg.txt structure.txt usage.txt \
wizard.txt LICENSE.md
exampledir = $(datadir)/doc
exampledir = $(docdir)
dist_example_DATA = example.c
EXTRA_DIST = win release $(DOCS) testimages md5cmp CMakeLists.txt \
EXTRA_DIST = win release $(DOCS) testimages CMakeLists.txt \
sharedlib/CMakeLists.txt cmakescripts libjpeg.map.in doc doxygen.config \
jccolext.c jdcolext.c jdmrgext.c
doxygen-extra.css jccolext.c jdcolext.c jdcol565.c jdmrgext.c jdmrg565.c \
jstdhuff.c jdcoefct.h jdmainct.h jdmaster.h jdsample.h wrppm.h \
md5/CMakeLists.txt
dist-hook:
rm -rf `find $(distdir) -name .svn`
MD5_JPEG_INT = 9a68f56bc76e466aa7e52f415d0f4a5f
MD5_JPEG_FAST = 0e1502e7fa421835e376a314fac2a39f
MD5_JPEG_FAST_100 = 7bf72a8e741d64eecb960c97323af77c
MD5_JPEG_FLOAT = d1623885ffafcd40c684af09e3d65cd5
MD5_JPEG_FLOAT_NOSIMD = fb4884c35f8273f498cb32879de5c455
MD5_JPEG_INT_GRAY = 72b51f894b8f4a10b3ee3066770aa38d
MD5_PPM_INT = d1ed0d11f076b842525271647716aeb8
MD5_PPM_FAST = 048298a2d2410261c0533cb97bcfef23
MD5_PPM_FLOAT = 7f5b446ee36b2630e06785b8d42af15f
MD5_PPM_FLOAT_NOSIMD = 64072f1dbdc5b3a187777788604971a5
MD5_PPM_INT_2_1 = 9f9de8c0612f8d06869b960b05abf9c9
MD5_PPM_INT_15_8 = b6875bc070720b899566cc06459b63b7
MD5_PPM_INT_7_4 = 06a177eae05f164fac57f7a2c346ee87
MD5_PPM_INT_13_8 = bc3452573c8152f6ae552939ee19f82f
MD5_PPM_INT_3_2 = f5a8b88a8a7f96016f04d259cf82ed67
MD5_PPM_INT_11_8 = d8cc73c0aaacd4556569b59437ba00a5
MD5_PPM_INT_5_4 = 32775dd9ad2ab90f4c5b219b53e0c86c
MD5_PPM_INT_9_8 = d25e61bc7eac0002f5b393aa223747b6
MD5_PPM_INT_7_8 = ddb564b7c74a09494016d6cd7502a946
MD5_PPM_INT_3_4 = 8ed8e68808c3fbc4ea764fc9d2968646
MD5_PPM_INT_5_8 = a3363274999da2366a024efae6d16c9b
MD5_PPM_INT_1_2 = e692a315cea26b988c8e8b29a5dbcd81
MD5_PPM_INT_3_8 = 79eca9175652ced755155c90e785a996
MD5_PPM_INT_1_4 = 79cd778f8bf1a117690052cacdd54eca
MD5_PPM_INT_1_8 = 391b3d4aca640c8567d6f8745eb2142f
MD5_PPM_FAST_1_2 = f30bcf6d32ccd44cbdd9aeaacbd9454f
MD5_BMP_256 = 4980185e3776e89bd931736e1cddeee6
MD5_JPEG_ARI = e986fb0a637a8d833d96e8a6d6d84ea1
MD5_PPM_ARI = 72b59a99bcf1de24c5b27d151bde2437
MD5_JPEG_PROG = 1c4afddc05c0a43489ee54438a482d92
SUBDIRS += md5
if WITH_12BIT
TESTORIG = testorig12.jpg
MD5_JPEG_RGB_ISLOW = 9620f424569594bb9242b48498ad801f
MD5_PPM_RGB_ISLOW = f3301d2219783b8b3d942b7239fa50c0
MD5_JPEG_422_IFAST_OPT = 7322e3bd2f127f7de4b40d4480ce60e4
MD5_PPM_422_IFAST = 79807fa552899e66a04708f533e16950
MD5_PPM_422M_IFAST = 07737bfe8a7c1c87aaa393a0098d16b0
MD5_JPEG_420_IFAST_Q100_PROG = a1da220b5604081863a504297ed59e55
MD5_PPM_420_Q100_IFAST = 1b3730122709f53d007255e8dfd3305e
MD5_PPM_420M_Q100_IFAST = 980a1a3c5bf9510022869d30b7d26566
MD5_JPEG_GRAY_ISLOW = 235c90707b16e2e069f37c888b2636d9
MD5_PPM_GRAY_ISLOW = 7213c10af507ad467da5578ca5ee1fca
MD5_PPM_GRAY_ISLOW_RGB = e96ee81c30a6ed422d466338bd3de65d
MD5_JPEG_420S_IFAST_OPT = 7af8e60be4d9c227ec63ac9b6630855e
MD5_JPEG_3x2_FLOAT_PROG_SSE = a8c17daf77b457725ec929e215b603f8
MD5_PPM_3x2_FLOAT_SSE = 42876ab9e5c2f76a87d08db5fbd57956
MD5_JPEG_3x2_FLOAT_PROG_32BIT = a8c17daf77b457725ec929e215b603f8
MD5_PPM_3x2_FLOAT_32BIT = 42876ab9e5c2f76a87d08db5fbd57956
MD5_PPM_3x2_FLOAT_64BIT = d6fbc71153b3d8ded484dbc17c7b9cf4
MD5_JPEG_3x2_IFAST_PROG = 1396cc2b7185cfe943d408c9d305339e
MD5_PPM_3x2_IFAST = 3975985ef6eeb0a2cdc58daa651ccc00
MD5_PPM_420M_ISLOW_2_1 = 4ca6be2a6f326ff9eaab63e70a8259c0
MD5_PPM_420M_ISLOW_15_8 = 12aa9f9534c1b3d7ba047322226365eb
MD5_PPM_420M_ISLOW_13_8 = f7e22817c7b25e1393e4ec101e9d4e96
MD5_PPM_420M_ISLOW_11_8 = 800a16f9f4dc9b293197bfe11be10a82
MD5_PPM_420M_ISLOW_9_8 = 06b7a92a9bc69f4dc36ec40f1937d55c
MD5_PPM_420M_ISLOW_7_8 = 3ec444a14a4ab4eab88ffc49c48eca43
MD5_PPM_420M_ISLOW_3_4 = 3e726b7ea872445b19437d1c1d4f0d93
MD5_PPM_420M_ISLOW_5_8 = a8a771abdc94301d20ffac119b2caccd
MD5_PPM_420M_ISLOW_1_2 = b419124dd5568b085787234866102866
MD5_PPM_420M_ISLOW_3_8 = 343d19015531b7bbe746124127244fa8
MD5_PPM_420M_ISLOW_1_4 = 35fd59d866e44659edfa3c18db2a3edb
MD5_PPM_420M_ISLOW_1_8 = ccaed48ac0aedefda5d4abe4013f4ad7
MD5_PPM_420_ISLOW_SKIP15_31 = 86664cd9dc956536409e44e244d20a97
MD5_PPM_420_ISLOW_PROG_CROP62x62_71_71 = 452a21656115a163029cfba5c04fa76a
MD5_PPM_444_ISLOW_SKIP1_6 = ef63901f71ef7a75cd78253fc0914f84
MD5_PPM_444_ISLOW_PROG_CROP98x98_13_13 = 15b173fb5872d9575572fbcc1b05956f
MD5_JPEG_CROP = cdb35ff4b4519392690ea040c56ea99c
else
TESTORIG = testorig.jpg
MD5_JPEG_RGB_ISLOW = 768e970dd57b340ff1b83c9d3d47c77b
MD5_PPM_RGB_ISLOW = 00a257f5393fef8821f2b88ac7421291
MD5_BMP_RGB_ISLOW_565 = f07d2e75073e4bb10f6c6f4d36e2e3be
MD5_BMP_RGB_ISLOW_565D = 4cfa0928ef3e6bb626d7728c924cfda4
MD5_JPEG_422_IFAST_OPT = 2540287b79d913f91665e660303ab2c8
MD5_PPM_422_IFAST = 35bd6b3f833bad23de82acea847129fa
MD5_PPM_422M_IFAST = 8dbc65323d62cca7c91ba02dd1cfa81d
MD5_BMP_422M_IFAST_565 = 3294bd4d9a1f2b3d08ea6020d0db7065
MD5_BMP_422M_IFAST_565D = da98c9c7b6039511be4a79a878a9abc1
MD5_JPEG_420_IFAST_Q100_PROG = 990cbe0329c882420a2094da7e5adade
MD5_PPM_420_Q100_IFAST = 5a732542015c278ff43635e473a8a294
MD5_PPM_420M_Q100_IFAST = ff692ee9323a3b424894862557c092f1
MD5_JPEG_GRAY_ISLOW = 72b51f894b8f4a10b3ee3066770aa38d
MD5_PPM_GRAY_ISLOW = 8d3596c56eace32f205deccc229aa5ed
MD5_PPM_GRAY_ISLOW_RGB = 116424ac07b79e5e801f00508eab48ec
MD5_BMP_GRAY_ISLOW_565 = 12f78118e56a2f48b966f792fedf23cc
MD5_BMP_GRAY_ISLOW_565D = bdbbd616441a24354c98553df5dc82db
MD5_JPEG_420S_IFAST_OPT = 388708217ac46273ca33086b22827ed8
# See README.md for more details on why this next bit is necessary.
MD5_JPEG_3x2_FLOAT_PROG_SSE = 343e3f8caf8af5986ebaf0bdc13b5c71
MD5_PPM_3x2_FLOAT_SSE = 1a75f36e5904d6fc3a85a43da9ad89bb
MD5_JPEG_3x2_FLOAT_PROG_32BIT = 9bca803d2042bd1eb03819e2bf92b3e5
MD5_PPM_3x2_FLOAT_32BIT = f6bfab038438ed8f5522fbd33595dcdc
MD5_PPM_3x2_FLOAT_64BIT = 0e917a34193ef976b679a6b069b1be26
MD5_JPEG_3x2_IFAST_PROG = 1ee5d2c1a77f2da495f993c8c7cceca5
MD5_PPM_3x2_IFAST = fd283664b3b49127984af0a7f118fccd
MD5_JPEG_420_ISLOW_ARI = e986fb0a637a8d833d96e8a6d6d84ea1
MD5_JPEG_444_ISLOW_PROGARI = 0a8f1c8f66e113c3cf635df0a475a617
MD5_PPM_420M_IFAST_ARI = 72b59a99bcf1de24c5b27d151bde2437
MD5_JPEG_420_ISLOW = 9a68f56bc76e466aa7e52f415d0f4a5f
MD5_PPM_420M_ISLOW_2_1 = 9f9de8c0612f8d06869b960b05abf9c9
MD5_PPM_420M_ISLOW_15_8 = b6875bc070720b899566cc06459b63b7
MD5_PPM_420M_ISLOW_13_8 = bc3452573c8152f6ae552939ee19f82f
MD5_PPM_420M_ISLOW_11_8 = d8cc73c0aaacd4556569b59437ba00a5
MD5_PPM_420M_ISLOW_9_8 = d25e61bc7eac0002f5b393aa223747b6
MD5_PPM_420M_ISLOW_7_8 = ddb564b7c74a09494016d6cd7502a946
MD5_PPM_420M_ISLOW_3_4 = 8ed8e68808c3fbc4ea764fc9d2968646
MD5_PPM_420M_ISLOW_5_8 = a3363274999da2366a024efae6d16c9b
MD5_PPM_420M_ISLOW_1_2 = e692a315cea26b988c8e8b29a5dbcd81
MD5_PPM_420M_ISLOW_3_8 = 79eca9175652ced755155c90e785a996
MD5_PPM_420M_ISLOW_1_4 = 79cd778f8bf1a117690052cacdd54eca
MD5_PPM_420M_ISLOW_1_8 = 391b3d4aca640c8567d6f8745eb2142f
MD5_BMP_420_ISLOW_256 = 4980185e3776e89bd931736e1cddeee6
MD5_BMP_420_ISLOW_565 = bf9d13e16c4923b92e1faa604d7922cb
MD5_BMP_420_ISLOW_565D = 6bde71526acc44bcff76f696df8638d2
MD5_BMP_420M_ISLOW_565 = 8dc0185245353cfa32ad97027342216f
MD5_BMP_420M_ISLOW_565D =d1be3a3339166255e76fa50a0d70d73e
MD5_PPM_420_ISLOW_SKIP15_31 = c4c65c1e43d7275cd50328a61e6534f0
MD5_PPM_420_ISLOW_ARI_SKIP16_139 = 087c6b123db16ac00cb88c5b590bb74a
MD5_PPM_420_ISLOW_PROG_CROP62x62_71_71 = 26eb36ccc7d1f0cb80cdabb0ac8b5d99
MD5_PPM_420_ISLOW_ARI_CROP53x53_4_4 = 886c6775af22370257122f8b16207e6d
MD5_PPM_444_ISLOW_SKIP1_6 = 5606f86874cf26b8fcee1117a0a436a6
MD5_PPM_444_ISLOW_PROG_CROP98x98_13_13 = db87dc7ce26bcdc7a6b56239ce2b9d6c
MD5_PPM_444_ISLOW_ARI_CROP37x37_0_0 = cb57b32bd6d03e35432362f7bf184b6d
MD5_JPEG_CROP = b4197f377e621c4e9b1d20471432610d
test: testclean all
endif
.PHONY: test
test: tjquicktest tjbittest bittest
if CROSS_COMPILING
tjquicktest: testclean
else
tjquicktest: testclean all
endif
if WITH_TURBOJPEG
if WITH_JAVA
$(JAVA) -cp java/turbojpeg.jar -Djava.library.path=.libs TJUnitTest
$(JAVA) -cp java/turbojpeg.jar -Djava.library.path=.libs TJUnitTest -bi
$(JAVA) -cp java/turbojpeg.jar -Djava.library.path=.libs TJUnitTest -yuv
$(JAVA) -cp java/turbojpeg.jar -Djava.library.path=.libs TJUnitTest -yuv -noyuvpad
$(JAVA) -cp java/turbojpeg.jar -Djava.library.path=.libs TJUnitTest -yuv -bi
$(JAVA) -cp java/turbojpeg.jar -Djava.library.path=.libs TJUnitTest -yuv -bi -noyuvpad
endif
./tjunittest
./tjunittest -alloc
./tjunittest -yuv
./tjunittest -yuv -alloc
./tjunittest -yuv -noyuvpad
endif
./cjpeg -dct int -outfile testoutint.jpg $(srcdir)/testimages/testorig.ppm
sh $(srcdir)/md5cmp $(MD5_JPEG_INT) testoutint.jpg
./cjpeg -dct fast -opt -outfile testoutfst.jpg $(srcdir)/testimages/testorig.ppm
sh $(srcdir)/md5cmp $(MD5_JPEG_FAST) testoutfst.jpg
./cjpeg -dct fast -quality 100 -opt -outfile testoutfst100.jpg $(srcdir)/testimages/testorig.ppm
sh $(srcdir)/md5cmp $(MD5_JPEG_FAST_100) testoutfst100.jpg
./cjpeg -dct float -outfile testoutflt.jpg $(srcdir)/testimages/testorig.ppm
if WITH_SSE_FLOAT_DCT
sh $(srcdir)/md5cmp $(MD5_JPEG_FLOAT) testoutflt.jpg
echo GREAT SUCCESS!
if CROSS_COMPILING
tjbittest: testclean
else
sh $(srcdir)/md5cmp $(MD5_JPEG_FLOAT_NOSIMD) testoutflt.jpg
tjbittest: testclean all
endif
./cjpeg -dct int -grayscale -outfile testoutgray.jpg $(srcdir)/testimages/testorig.ppm
sh $(srcdir)/md5cmp $(MD5_JPEG_INT_GRAY) testoutgray.jpg
./djpeg -dct int -fast -ppm -outfile testoutint.ppm $(srcdir)/testimages/testorig.jpg
sh $(srcdir)/md5cmp $(MD5_PPM_INT) testoutint.ppm
./djpeg -dct fast -ppm -outfile testoutfst.ppm $(srcdir)/testimages/testorig.jpg
sh $(srcdir)/md5cmp $(MD5_PPM_FAST) testoutfst.ppm
./djpeg -dct float -ppm -outfile testoutflt.ppm $(srcdir)/testimages/testorig.jpg
if WITH_SSE_FLOAT_DCT
sh $(srcdir)/md5cmp $(MD5_PPM_FLOAT) testoutflt.ppm
else
sh $(srcdir)/md5cmp $(MD5_PPM_FLOAT_NOSIMD) testoutflt.ppm
endif
MD5[21]=$(MD5_PPM_INT_2_1); \
MD5[158]=$(MD5_PPM_INT_15_8); \
MD5[74]=$(MD5_PPM_INT_7_4); \
MD5[138]=$(MD5_PPM_INT_13_8); \
MD5[32]=$(MD5_PPM_INT_3_2); \
MD5[118]=$(MD5_PPM_INT_11_8); \
MD5[54]=$(MD5_PPM_INT_5_4); \
MD5[98]=$(MD5_PPM_INT_9_8); \
MD5[78]=$(MD5_PPM_INT_7_8); \
MD5[34]=$(MD5_PPM_INT_3_4); \
MD5[58]=$(MD5_PPM_INT_5_8); \
MD5[12]=$(MD5_PPM_INT_1_2); \
MD5[38]=$(MD5_PPM_INT_3_8); \
MD5[14]=$(MD5_PPM_INT_1_4); \
MD5[18]=$(MD5_PPM_INT_1_8); \
for scale in 2_1 15_8 7_4 13_8 3_2 11_8 5_4 9_8 7_8 3_4 5_8 1_2 3_8 1_4 1_8; do \
scalearg=`echo $$scale | sed s@_@/@g`; \
arrayindex=`echo $$scale | sed s@_@@g`; \
./djpeg -dct int -nosmooth -scale $$scalearg -ppm -outfile testoutint$$scale.ppm $(srcdir)/testimages/testorig.jpg; \
sh $(srcdir)/md5cmp $${MD5[$$arrayindex]} testoutint$$scale.ppm; \
if WITH_TURBOJPEG
MD5_PPM_GRAY_TILE = 89d3ca21213d9d864b50b4e4e7de4ca6
MD5_PPM_420_8x8_TILE = 847fceab15c5b7b911cb986cf0f71de3
MD5_PPM_420_16x16_TILE = ca45552a93687e078f7137cc4126a7b0
MD5_PPM_420_32x32_TILE = d8676f1d6b68df358353bba9844f4a00
MD5_PPM_420_64x64_TILE = 4e4c1a3d7ea4bace4f868bcbe83b7050
MD5_PPM_420_128x128_TILE = f24c3429c52265832beab9df72a0ceae
MD5_PPM_420M_8x8_TILE = bc25320e1f4c31ce2e610e43e9fd173c
MD5_PPM_420M_TILE = 75ffdf14602258c5c189522af57fa605
MD5_PPM_422_8x8_TILE = d83dacd9fc73b0a6f10c09acad64eb1e
MD5_PPM_422_16x16_TILE = 35077fb610d72dd743b1eb0cbcfe10fb
MD5_PPM_422_32x32_TILE = e6902ed8a449ecc0f0d6f2bf945f65f7
MD5_PPM_422_64x64_TILE = 2b4502a8f316cedbde1da7bce3d2231e
MD5_PPM_422_128x128_TILE = f0b5617d578f5e13c8eee215d64d4877
MD5_PPM_422M_8x8_TILE = 828941d7f41cd6283abd6beffb7fd51d
MD5_PPM_422M_TILE = e877ae1324c4a280b95376f7f018172f
MD5_PPM_444_TILE = 7964e41e67cfb8d0a587c0aa4798f9c3
# Test compressing from/decompressing to an arbitrary subregion of a larger
# image buffer
cp $(srcdir)/testimages/testorig.ppm testout_tile.ppm
./tjbench testout_tile.ppm 95 -rgb -quiet -tile -benchtime 0.01 >/dev/null 2>&1
for i in 8 16 32 64 128; do \
md5/md5cmp $(MD5_PPM_GRAY_TILE) testout_tile_GRAY_Q95_$$i\x$$i.ppm; \
done
./djpeg -dct fast -scale 1/2 -ppm -outfile testoutfst1_2.ppm $(srcdir)/testimages/testorig.jpg
sh $(srcdir)/md5cmp $(MD5_PPM_FAST_1_2) testoutfst1_2.ppm
./djpeg -dct int -bmp -colors 256 -outfile testout.bmp $(srcdir)/testimages/testorig.jpg
sh $(srcdir)/md5cmp $(MD5_BMP_256) testout.bmp
md5/md5cmp $(MD5_PPM_420_8x8_TILE) testout_tile_420_Q95_8x8.ppm
md5/md5cmp $(MD5_PPM_420_16x16_TILE) testout_tile_420_Q95_16x16.ppm
md5/md5cmp $(MD5_PPM_420_32x32_TILE) testout_tile_420_Q95_32x32.ppm
md5/md5cmp $(MD5_PPM_420_64x64_TILE) testout_tile_420_Q95_64x64.ppm
md5/md5cmp $(MD5_PPM_420_128x128_TILE) testout_tile_420_Q95_128x128.ppm
md5/md5cmp $(MD5_PPM_422_8x8_TILE) testout_tile_422_Q95_8x8.ppm
md5/md5cmp $(MD5_PPM_422_16x16_TILE) testout_tile_422_Q95_16x16.ppm
md5/md5cmp $(MD5_PPM_422_32x32_TILE) testout_tile_422_Q95_32x32.ppm
md5/md5cmp $(MD5_PPM_422_64x64_TILE) testout_tile_422_Q95_64x64.ppm
md5/md5cmp $(MD5_PPM_422_128x128_TILE) testout_tile_422_Q95_128x128.ppm
for i in 8 16 32 64 128; do \
md5/md5cmp $(MD5_PPM_444_TILE) testout_tile_444_Q95_$$i\x$$i.ppm; \
done
rm -f testout_tile_GRAY_* testout_tile_420_* testout_tile_422_* testout_tile_444_*
./tjbench testout_tile.ppm 95 -rgb -fastupsample -quiet -tile -benchtime 0.01 >/dev/null 2>&1
md5/md5cmp $(MD5_PPM_420M_8x8_TILE) testout_tile_420_Q95_8x8.ppm
for i in 16 32 64 128; do \
md5/md5cmp $(MD5_PPM_420M_TILE) testout_tile_420_Q95_$$i\x$$i.ppm; \
done
md5/md5cmp $(MD5_PPM_422M_8x8_TILE) testout_tile_422_Q95_8x8.ppm
for i in 16 32 64 128; do \
md5/md5cmp $(MD5_PPM_422M_TILE) testout_tile_422_Q95_$$i\x$$i.ppm; \
done
rm -f testout_tile_GRAY_* testout_tile_420_* testout_tile_422_* testout_tile_444_* testout_tile.ppm
echo GREAT SUCCESS!
endif
if CROSS_COMPILING
bittest: testclean
else
bittest: testclean all
endif
# These tests are carefully crafted to provide full coverage of as many of the
# underlying algorithms as possible (including all of the SIMD-accelerated
# ones.)
# CC: null SAMP: fullsize FDCT: islow ENT: huff
./cjpeg -rgb -dct int -outfile testout_rgb_islow.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_RGB_ISLOW) testout_rgb_islow.jpg
# CC: null SAMP: fullsize IDCT: islow ENT: huff
./djpeg -dct int -ppm -outfile testout_rgb_islow.ppm testout_rgb_islow.jpg
md5/md5cmp $(MD5_PPM_RGB_ISLOW) testout_rgb_islow.ppm
rm -f testout_rgb_islow.ppm
if WITH_12BIT
rm -f testout_rgb_islow.jpg
else
# CC: RGB->RGB565 SAMP: fullsize IDCT: islow ENT: huff
./djpeg -dct int -rgb565 -dither none -bmp -outfile testout_rgb_islow_565.bmp testout_rgb_islow.jpg
md5/md5cmp $(MD5_BMP_RGB_ISLOW_565) testout_rgb_islow_565.bmp
rm -f testout_rgb_islow_565.bmp
# CC: RGB->RGB565 (dithered) SAMP: fullsize IDCT: islow ENT: huff
./djpeg -dct int -rgb565 -bmp -outfile testout_rgb_islow_565D.bmp testout_rgb_islow.jpg
md5/md5cmp $(MD5_BMP_RGB_ISLOW_565D) testout_rgb_islow_565D.bmp
rm -f testout_rgb_islow_565D.bmp testout_rgb_islow.jpg
endif
# CC: RGB->YCC SAMP: fullsize/h2v1 FDCT: ifast ENT: 2-pass huff
./cjpeg -sample 2x1 -dct fast -opt -outfile testout_422_ifast_opt.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_422_IFAST_OPT) testout_422_ifast_opt.jpg
# CC: YCC->RGB SAMP: fullsize/h2v1 fancy IDCT: ifast ENT: huff
./djpeg -dct fast -outfile testout_422_ifast.ppm testout_422_ifast_opt.jpg
md5/md5cmp $(MD5_PPM_422_IFAST) testout_422_ifast.ppm
rm -f testout_422_ifast.ppm
# CC: YCC->RGB SAMP: h2v1 merged IDCT: ifast ENT: huff
./djpeg -dct fast -nosmooth -outfile testout_422m_ifast.ppm testout_422_ifast_opt.jpg
md5/md5cmp $(MD5_PPM_422M_IFAST) testout_422m_ifast.ppm
rm -f testout_422m_ifast.ppm
if WITH_12BIT
rm -f testout_422_ifast_opt.jpg
else
# CC: YCC->RGB565 SAMP: h2v1 merged IDCT: ifast ENT: huff
./djpeg -dct int -nosmooth -rgb565 -dither none -bmp -outfile testout_422m_ifast_565.bmp testout_422_ifast_opt.jpg
md5/md5cmp $(MD5_BMP_422M_IFAST_565) testout_422m_ifast_565.bmp
rm -f testout_422m_ifast_565.bmp
# CC: YCC->RGB565 (dithered) SAMP: h2v1 merged IDCT: ifast ENT: huff
./djpeg -dct int -nosmooth -rgb565 -bmp -outfile testout_422m_ifast_565D.bmp testout_422_ifast_opt.jpg
md5/md5cmp $(MD5_BMP_422M_IFAST_565D) testout_422m_ifast_565D.bmp
rm -f testout_422m_ifast_565D.bmp testout_422_ifast_opt.jpg
endif
# CC: RGB->YCC SAMP: fullsize/h2v2 FDCT: ifast ENT: prog huff
./cjpeg -sample 2x2 -quality 100 -dct fast -prog -outfile testout_420_q100_ifast_prog.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_420_IFAST_Q100_PROG) testout_420_q100_ifast_prog.jpg
# CC: YCC->RGB SAMP: fullsize/h2v2 fancy IDCT: ifast ENT: prog huff
./djpeg -dct fast -outfile testout_420_q100_ifast.ppm testout_420_q100_ifast_prog.jpg
md5/md5cmp $(MD5_PPM_420_Q100_IFAST) testout_420_q100_ifast.ppm
rm -f testout_420_q100_ifast.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: ifast ENT: prog huff
./djpeg -dct fast -nosmooth -outfile testout_420m_q100_ifast.ppm testout_420_q100_ifast_prog.jpg
md5/md5cmp $(MD5_PPM_420M_Q100_IFAST) testout_420m_q100_ifast.ppm
rm -f testout_420m_q100_ifast.ppm testout_420_q100_ifast_prog.jpg
# CC: RGB->Gray SAMP: fullsize FDCT: islow ENT: huff
./cjpeg -gray -dct int -outfile testout_gray_islow.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_GRAY_ISLOW) testout_gray_islow.jpg
# CC: Gray->Gray SAMP: fullsize IDCT: islow ENT: huff
./djpeg -dct int -outfile testout_gray_islow.ppm testout_gray_islow.jpg
md5/md5cmp $(MD5_PPM_GRAY_ISLOW) testout_gray_islow.ppm
rm -f testout_gray_islow.ppm
# CC: Gray->RGB SAMP: fullsize IDCT: islow ENT: huff
./djpeg -dct int -rgb -outfile testout_gray_islow_rgb.ppm testout_gray_islow.jpg
md5/md5cmp $(MD5_PPM_GRAY_ISLOW_RGB) testout_gray_islow_rgb.ppm
rm -f testout_gray_islow_rgb.ppm
if WITH_12BIT
rm -f testout_gray_islow.jpg
else
# CC: Gray->RGB565 SAMP: fullsize IDCT: islow ENT: huff
./djpeg -dct int -rgb565 -dither none -bmp -outfile testout_gray_islow_565.bmp testout_gray_islow.jpg
md5/md5cmp $(MD5_BMP_GRAY_ISLOW_565) testout_gray_islow_565.bmp
rm -f testout_gray_islow_565.bmp
# CC: Gray->RGB565 (dithered) SAMP: fullsize IDCT: islow ENT: huff
./djpeg -dct int -rgb565 -bmp -outfile testout_gray_islow_565D.bmp testout_gray_islow.jpg
md5/md5cmp $(MD5_BMP_GRAY_ISLOW_565D) testout_gray_islow_565D.bmp
rm -f testout_gray_islow_565D.bmp testout_gray_islow.jpg
endif
# CC: RGB->YCC SAMP: fullsize smooth/h2v2 smooth FDCT: islow
# ENT: 2-pass huff
./cjpeg -sample 2x2 -smooth 1 -dct int -opt -outfile testout_420s_ifast_opt.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_420S_IFAST_OPT) testout_420s_ifast_opt.jpg
rm -f testout_420s_ifast_opt.jpg
# The output of the floating point tests is not validated by default, because
# the output differs depending on the type of floating point math used, and
# this is only deterministic if the DCT/IDCT are implemented using SIMD
# instructions on a particular platform. Pass one of the following on the make
# command line to validate the floating point tests against one of the expected
# results:
#
# FLOATTEST=sse validate against the expected results from the libjpeg-turbo
# SSE SIMD extensions
# FLOATTEST=32bit validate against the expected results from the C code
# when running on a 32-bit FPU (or when SSE is being used for
# floating point math, which is generally the default with
# x86-64 compilers)
# FLOATTEST=64bit validate against the exepected results from the C code
# when running on a 64-bit FPU
# CC: RGB->YCC SAMP: fullsize/int FDCT: float ENT: prog huff
./cjpeg -sample 3x2 -dct float -prog -outfile testout_3x2_float_prog.jpg $(srcdir)/testimages/testorig.ppm
if [ "${FLOATTEST}" = "sse" ]; then \
md5/md5cmp $(MD5_JPEG_3x2_FLOAT_PROG_SSE) testout_3x2_float_prog.jpg; \
elif [ "${FLOATTEST}" = "32bit" -o "${FLOATTEST}" = "64bit" ]; then \
md5/md5cmp $(MD5_JPEG_3x2_FLOAT_PROG_32BIT) testout_3x2_float_prog.jpg; \
fi
# CC: YCC->RGB SAMP: fullsize/int IDCT: float ENT: prog huff
./djpeg -dct float -outfile testout_3x2_float.ppm testout_3x2_float_prog.jpg
if [ "${FLOATTEST}" = "sse" ]; then \
md5/md5cmp $(MD5_PPM_3x2_FLOAT_SSE) testout_3x2_float.ppm; \
elif [ "${FLOATTEST}" = "32bit" ]; then \
md5/md5cmp $(MD5_PPM_3x2_FLOAT_32BIT) testout_3x2_float.ppm; \
elif [ "${FLOATTEST}" = "64bit" ]; then \
md5/md5cmp $(MD5_PPM_3x2_FLOAT_64BIT) testout_3x2_float.ppm; \
fi
rm -f testout_3x2_float.ppm testout_3x2_float_prog.jpg
# CC: RGB->YCC SAMP: fullsize/int FDCT: ifast ENT: prog huff
./cjpeg -sample 3x2 -dct fast -prog -outfile testout_3x2_ifast_prog.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_3x2_IFAST_PROG) testout_3x2_ifast_prog.jpg
# CC: YCC->RGB SAMP: fullsize/int IDCT: ifast ENT: prog huff
./djpeg -dct fast -outfile testout_3x2_ifast.ppm testout_3x2_ifast_prog.jpg
md5/md5cmp $(MD5_PPM_3x2_IFAST) testout_3x2_ifast.ppm
rm -f testout_3x2_ifast.ppm testout_3x2_ifast_prog.jpg
if WITH_ARITH_ENC
./cjpeg -dct int -arithmetic -outfile testoutari.jpg $(srcdir)/testimages/testorig.ppm
sh $(srcdir)/md5cmp $(MD5_JPEG_ARI) testoutari.jpg
./jpegtran -arithmetic -outfile testouta.jpg $(srcdir)/testimages/testimgint.jpg
sh $(srcdir)/md5cmp $(MD5_JPEG_ARI) testouta.jpg
# CC: YCC->RGB SAMP: fullsize/h2v2 FDCT: islow ENT: arith
./cjpeg -dct int -arithmetic -outfile testout_420_islow_ari.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_420_ISLOW_ARI) testout_420_islow_ari.jpg
rm -f testout_420_islow_ari.jpg
./jpegtran -arithmetic -outfile testout_420_islow_ari.jpg $(srcdir)/testimages/testimgint.jpg
md5/md5cmp $(MD5_JPEG_420_ISLOW_ARI) testout_420_islow_ari.jpg
rm -f testout_420_islow_ari.jpg
# CC: YCC->RGB SAMP: fullsize FDCT: islow ENT: prog arith
./cjpeg -sample 1x1 -dct int -prog -arithmetic -outfile testout_444_islow_progari.jpg $(srcdir)/testimages/testorig.ppm
md5/md5cmp $(MD5_JPEG_444_ISLOW_PROGARI) testout_444_islow_progari.jpg
rm -f testout_444_islow_progari.jpg
endif
if WITH_ARITH_DEC
./djpeg -dct int -fast -ppm -outfile testoutari.ppm $(srcdir)/testimages/testimgari.jpg
sh $(srcdir)/md5cmp $(MD5_PPM_ARI) testoutari.ppm
./jpegtran -outfile testouta.jpg $(srcdir)/testimages/testimgari.jpg
sh $(srcdir)/md5cmp $(MD5_JPEG_INT) testouta.jpg
# CC: RGB->YCC SAMP: h2v2 merged IDCT: ifast ENT: arith
./djpeg -fast -ppm -outfile testout_420m_ifast_ari.ppm $(srcdir)/testimages/testimgari.jpg
md5/md5cmp $(MD5_PPM_420M_IFAST_ARI) testout_420m_ifast_ari.ppm
rm -f testout_420m_ifast_ari.ppm
./jpegtran -outfile testout_420_islow.jpg $(srcdir)/testimages/testimgari.jpg
md5/md5cmp $(MD5_JPEG_420_ISLOW) testout_420_islow.jpg
rm -f testout_420_islow.jpg
endif
./cjpeg -dct int -progressive -outfile testoutp.jpg $(srcdir)/testimages/testorig.ppm
sh $(srcdir)/md5cmp $(MD5_JPEG_PROG) testoutp.jpg
./jpegtran -outfile testoutt.jpg testoutp.jpg
sh $(srcdir)/md5cmp $(MD5_JPEG_INT) testoutt.jpg
./jpegtran -crop 120x90+20+50 -transpose -perfect -outfile testoutcrop.jpg $(srcdir)/testimages/testorig.jpg
sh $(srcdir)/md5cmp $(MD5_JPEG_CROP) testoutcrop.jpg
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 16x16 islow ENT: huff
./djpeg -dct int -scale 2/1 -nosmooth -ppm -outfile testout_420m_islow_2_1.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_2_1) testout_420m_islow_2_1.ppm
rm -f testout_420m_islow_2_1.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 15x15 islow ENT: huff
./djpeg -dct int -scale 15/8 -nosmooth -ppm -outfile testout_420m_islow_15_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_15_8) testout_420m_islow_15_8.ppm
rm -f testout_420m_islow_15_8.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 13x13 islow ENT: huff
./djpeg -dct int -scale 13/8 -nosmooth -ppm -outfile testout_420m_islow_13_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_13_8) testout_420m_islow_13_8.ppm
rm -f testout_420m_islow_13_8.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 11x11 islow ENT: huff
./djpeg -dct int -scale 11/8 -nosmooth -ppm -outfile testout_420m_islow_11_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_11_8) testout_420m_islow_11_8.ppm
rm -f testout_420m_islow_11_8.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 9x9 islow ENT: huff
./djpeg -dct int -scale 9/8 -nosmooth -ppm -outfile testout_420m_islow_9_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_9_8) testout_420m_islow_9_8.ppm
rm -f testout_420m_islow_9_8.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 7x7 islow/14x14 islow ENT: huff
./djpeg -dct int -scale 7/8 -nosmooth -ppm -outfile testout_420m_islow_7_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_7_8) testout_420m_islow_7_8.ppm
rm -f testout_420m_islow_7_8.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 6x6 islow/12x12 islow ENT: huff
./djpeg -dct int -scale 3/4 -nosmooth -ppm -outfile testout_420m_islow_3_4.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_3_4) testout_420m_islow_3_4.ppm
rm -f testout_420m_islow_3_4.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 5x5 islow/10x10 islow ENT: huff
./djpeg -dct int -scale 5/8 -nosmooth -ppm -outfile testout_420m_islow_5_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_5_8) testout_420m_islow_5_8.ppm
rm -f testout_420m_islow_5_8.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 4x4 islow/8x8 islow ENT: huff
./djpeg -dct int -scale 1/2 -nosmooth -ppm -outfile testout_420m_islow_1_2.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_1_2) testout_420m_islow_1_2.ppm
rm -f testout_420m_islow_1_2.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 3x3 islow/6x6 islow ENT: huff
./djpeg -dct int -scale 3/8 -nosmooth -ppm -outfile testout_420m_islow_3_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_3_8) testout_420m_islow_3_8.ppm
rm -f testout_420m_islow_3_8.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 2x2 islow/4x4 islow ENT: huff
./djpeg -dct int -scale 1/4 -nosmooth -ppm -outfile testout_420m_islow_1_4.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_1_4) testout_420m_islow_1_4.ppm
rm -f testout_420m_islow_1_4.ppm
# CC: YCC->RGB SAMP: h2v2 merged IDCT: 1x1 islow/2x2 islow ENT: huff
./djpeg -dct int -scale 1/8 -nosmooth -ppm -outfile testout_420m_islow_1_8.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420M_ISLOW_1_8) testout_420m_islow_1_8.ppm
rm -f testout_420m_islow_1_8.ppm
if WITH_12BIT
else
# CC: YCC->RGB (dithered) SAMP: h2v2 fancy IDCT: islow ENT: huff
./djpeg -dct int -colors 256 -bmp -outfile testout_420_islow_256.bmp $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_BMP_420_ISLOW_256) testout_420_islow_256.bmp
rm -f testout_420_islow_256.bmp
# CC: YCC->RGB565 SAMP: h2v2 fancy IDCT: islow ENT: huff
./djpeg -dct int -rgb565 -dither none -bmp -outfile testout_420_islow_565.bmp $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_BMP_420_ISLOW_565) testout_420_islow_565.bmp
rm -f testout_420_islow_565.bmp
# CC: YCC->RGB565 (dithered) SAMP: h2v2 fancy IDCT: islow ENT: huff
./djpeg -dct int -rgb565 -bmp -outfile testout_420_islow_565D.bmp $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_BMP_420_ISLOW_565D) testout_420_islow_565D.bmp
rm -f testout_420_islow_565D.bmp
# CC: YCC->RGB565 SAMP: h2v2 merged IDCT: islow ENT: huff
./djpeg -dct int -nosmooth -rgb565 -dither none -bmp -outfile testout_420m_islow_565.bmp $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_BMP_420M_ISLOW_565) testout_420m_islow_565.bmp
rm -f testout_420m_islow_565.bmp
# CC: YCC->RGB565 (dithered) SAMP: h2v2 merged IDCT: islow ENT: huff
./djpeg -dct int -nosmooth -rgb565 -bmp -outfile testout_420m_islow_565D.bmp $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_BMP_420M_ISLOW_565D) testout_420m_islow_565D.bmp
rm -f testout_420m_islow_565D.bmp
endif
# Partial decode tests. These tests are designed to cover all of the possible
# code paths in jpeg_skip_scanlines().
# Context rows: Yes Intra-iMCU row: Yes iMCU row prefetch: No ENT: huff
./djpeg -dct int -skip 15,31 -ppm -outfile testout_420_islow_skip15,31.ppm $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_PPM_420_ISLOW_SKIP15_31) testout_420_islow_skip15,31.ppm
rm -f testout_420_islow_skip15,31.ppm
# Context rows: Yes Intra-iMCU row: No iMCU row prefetch: Yes ENT: arith
if WITH_ARITH_DEC
./djpeg -dct int -skip 16,139 -ppm -outfile testout_420_islow_ari_skip16,139.ppm $(srcdir)/testimages/testimgari.jpg
md5/md5cmp $(MD5_PPM_420_ISLOW_ARI_SKIP16_139) testout_420_islow_ari_skip16,139.ppm
rm -f testout_420_islow_ari_skip16,139.ppm
endif
# Context rows: Yes Intra-iMCU row: No iMCU row prefetch: No ENT: prog huff
./cjpeg -dct int -prog -outfile testout_420_islow_prog.jpg $(srcdir)/testimages/testorig.ppm
./djpeg -dct int -crop 62x62+71+71 -ppm -outfile testout_420_islow_prog_crop62x62,71,71.ppm testout_420_islow_prog.jpg
md5/md5cmp $(MD5_PPM_420_ISLOW_PROG_CROP62x62_71_71) testout_420_islow_prog_crop62x62,71,71.ppm
rm -f testout_420_islow_prog_crop62x62,71,71.ppm testout_420_islow_prog.jpg
# Context rows: Yes Intra-iMCU row: No iMCU row prefetch: No ENT: arith
if WITH_ARITH_DEC
./djpeg -dct int -crop 53x53+4+4 -ppm -outfile testout_420_islow_ari_crop53x53,4,4.ppm $(srcdir)/testimages/testimgari.jpg
md5/md5cmp $(MD5_PPM_420_ISLOW_ARI_CROP53x53_4_4) testout_420_islow_ari_crop53x53,4,4.ppm
rm -f testout_420_islow_ari_crop53x53,4,4.ppm
endif
# Context rows: No Intra-iMCU row: Yes ENT: huff
./cjpeg -dct int -sample 1x1 -outfile testout_444_islow.jpg $(srcdir)/testimages/testorig.ppm
./djpeg -dct int -skip 1,6 -ppm -outfile testout_444_islow_skip1,6.ppm testout_444_islow.jpg
md5/md5cmp $(MD5_PPM_444_ISLOW_SKIP1_6) testout_444_islow_skip1,6.ppm
rm -f testout_444_islow_skip1,6.ppm testout_444_islow.jpg
# Context rows: No Intra-iMCU row: No ENT: prog huff
./cjpeg -dct int -prog -sample 1x1 -outfile testout_444_islow_prog.jpg $(srcdir)/testimages/testorig.ppm
./djpeg -dct int -crop 98x98+13+13 -ppm -outfile testout_444_islow_prog_crop98x98,13,13.ppm testout_444_islow_prog.jpg
md5/md5cmp $(MD5_PPM_444_ISLOW_PROG_CROP98x98_13_13) testout_444_islow_prog_crop98x98,13,13.ppm
rm -f testout_444_islow_prog_crop98x98,13,13.ppm testout_444_islow_prog.jpg
# Context rows: No Intra-iMCU row: No ENT: arith
if WITH_ARITH_ENC
./cjpeg -dct int -arithmetic -sample 1x1 -outfile testout_444_islow_ari.jpg $(srcdir)/testimages/testorig.ppm
if WITH_ARITH_DEC
./djpeg -dct int -crop 37x37+0+0 -ppm -outfile testout_444_islow_ari_crop37x37,0,0.ppm testout_444_islow_ari.jpg
md5/md5cmp $(MD5_PPM_444_ISLOW_ARI_CROP37x37_0_0) testout_444_islow_ari_crop37x37,0,0.ppm
rm -f testout_444_islow_ari_crop37x37,0,0.ppm
endif
rm -f testout_444_islow_ari.jpg
endif
./jpegtran -crop 120x90+20+50 -transpose -perfect -outfile testout_crop.jpg $(srcdir)/testimages/$(TESTORIG)
md5/md5cmp $(MD5_JPEG_CROP) testout_crop.jpg
rm -f testout_crop.jpg
echo GREAT SUCCESS!
testclean:
@@ -300,88 +681,101 @@ testclean:
rm -f *_440_*.ppm
rm -f *_440_*.jpg
rm -f *_440.yuv
rm -f *_411_*.bmp
rm -f *_411_*.png
rm -f *_411_*.ppm
rm -f *_411_*.jpg
rm -f *_411.yuv
tjtest:
sh ./tjbenchtest
sh ./tjbenchtest -alloc
sh ./tjbenchtest -yuv
sh ./tjbenchtest -yuv -alloc
if WITH_JAVA
sh ./tjbenchtest.java
sh ./tjbenchtest.java -yuv
endif
if X86_64
pkgscripts/libjpeg-turbo.spec: pkgscripts/libjpeg-turbo.spec.tmpl
cat pkgscripts/libjpeg-turbo.spec.tmpl | sed s@%{__prefix}@$(prefix)@g | \
sed s@%{__bindir}@$(bindir)@g | sed s@%{__datadir}@$(datadir)@g | \
sed s@%{__docdir}@$(docdir)@g | sed s@%{__includedir}@$(includedir)@g | \
sed s@%{__libdir}@$(libdir)@g | sed s@%{__mandir}@$(mandir)@g \
> pkgscripts/libjpeg-turbo.spec
install-exec-hook:
__PREFIX=`echo ${prefix} | sed -e 's@\/*$$@@'`; \
if [ "$$__PREFIX" = "/opt/libjpeg-turbo" ]; then \
cd $(DESTDIR)/${prefix}; \
if [ -d lib -a ! -d lib64 -a ! -h lib64 ]; then \
$(LN_S) lib lib64; \
fi \
fi
else
install-exec-hook:
__PREFIX=`echo ${prefix} | sed -e 's@\/*$$@@'`; \
if [ "$$__PREFIX" = "/opt/libjpeg-turbo" ]; then \
cd $(DESTDIR)/${prefix}; \
if [ -d lib -a ! -d lib32 -a ! -h lib32 ]; then \
$(LN_S) lib lib32; \
fi \
fi
endif
rpm: all
rpm: all pkgscripts/libjpeg-turbo.spec
TMPDIR=`mktemp -d /tmp/${PACKAGE_NAME}-build.XXXXXX`; \
mkdir -p $$TMPDIR/RPMS; \
ln -fs `pwd` $$TMPDIR/BUILD; \
rm -f ${PACKAGE_NAME}-${VERSION}.${RPMARCH}.rpm; \
rm -f ${PKGNAME}-${VERSION}.${RPMARCH}.rpm; \
rpmbuild -bb --define "_blddir $$TMPDIR/buildroot" \
--define "_topdir $$TMPDIR" \
--target ${RPMARCH} pkgscripts/libjpeg-turbo.spec; \
cp $$TMPDIR/RPMS/${RPMARCH}/${PACKAGE_NAME}-${VERSION}-${BUILD}.${RPMARCH}.rpm \
${PACKAGE_NAME}-${VERSION}.${RPMARCH}.rpm; \
cp $$TMPDIR/RPMS/${RPMARCH}/${PKGNAME}-${VERSION}-${BUILD}.${RPMARCH}.rpm \
${PKGNAME}-${VERSION}.${RPMARCH}.rpm; \
rm -rf $$TMPDIR
srpm: dist-gzip
srpm: dist-gzip pkgscripts/libjpeg-turbo.spec
TMPDIR=`mktemp -d /tmp/${PACKAGE_NAME}-build.XXXXXX`; \
mkdir -p $$TMPDIR/RPMS; \
mkdir -p $$TMPDIR/SRPMS; \
mkdir -p $$TMPDIR/BUILD; \
mkdir -p $$TMPDIR/SOURCES; \
mkdir -p $$TMPDIR/SPECS; \
rm -f ${PACKAGE_NAME}-${VERSION}.src.rpm; \
rm -f ${PKGNAME}-${VERSION}.src.rpm; \
cp ${PACKAGE_NAME}-${VERSION}.tar.gz $$TMPDIR/SOURCES; \
cat pkgscripts/libjpeg-turbo.spec | sed s/%{_blddir}/%{_tmppath}/g \
| sed s/#--\>//g \
> $$TMPDIR/SPECS/libjpeg-turbo.spec; \
rpmbuild -bs --define "_topdir $$TMPDIR" $$TMPDIR/SPECS/libjpeg-turbo.spec; \
cp $$TMPDIR/SRPMS/${PACKAGE_NAME}-${VERSION}-${BUILD}.src.rpm \
${PACKAGE_NAME}-${VERSION}.src.rpm; \
cp $$TMPDIR/SRPMS/${PKGNAME}-${VERSION}-${BUILD}.src.rpm \
${PKGNAME}-${VERSION}.src.rpm; \
rm -rf $$TMPDIR
deb: all
pkgscripts/makedpkg: pkgscripts/makedpkg.tmpl
cat pkgscripts/makedpkg.tmpl | sed s@%{__prefix}@$(prefix)@g | \
sed s@%{__docdir}@$(docdir)@g | sed s@%{__libdir}@$(libdir)@g \
> pkgscripts/makedpkg
deb: all pkgscripts/makedpkg
sh pkgscripts/makedpkg
pkgscripts/uninstall: pkgscripts/uninstall.tmpl
cat pkgscripts/uninstall.tmpl | sed s@%{__prefix}@$(prefix)@g | \
sed s@%{__bindir}@$(bindir)@g | sed s@%{__datadir}@$(datadir)@g | \
sed s@%{__includedir}@$(includedir)@g | sed s@%{__libdir}@$(libdir)@g | \
sed s@%{__mandir}@$(mandir)@g > pkgscripts/uninstall
pkgscripts/makemacpkg: pkgscripts/makemacpkg.tmpl
cat pkgscripts/makemacpkg.tmpl | sed s@%{__prefix}@$(prefix)@g | \
sed s@%{__bindir}@$(bindir)@g | sed s@%{__docdir}@$(docdir)@g | \
sed s@%{__libdir}@$(libdir)@g > pkgscripts/makemacpkg
if X86_64
udmg: all
udmg: all pkgscripts/makemacpkg pkgscripts/uninstall
sh pkgscripts/makemacpkg -build32 ${BUILDDIR32}
iosdmg: all
sh pkgscripts/makemacpkg -build32 ${BUILDDIR32} -buildarmv6 ${BUILDDIRARMV6} -buildarmv7 ${BUILDDIRARMV7} -buildarmv7s ${BUILDDIRARMV7S}
iosdmg: all pkgscripts/makemacpkg pkgscripts/uninstall
sh pkgscripts/makemacpkg -build32 ${BUILDDIR32} -buildarmv7 ${BUILDDIRARMV7} -buildarmv7s ${BUILDDIRARMV7S} -buildarmv8 ${BUILDDIRARMV8} -lipo "${LIPO}"
else
iosdmg: all
sh pkgscripts/makemacpkg -buildarmv6 ${BUILDDIRARMV6} -buildarmv7 ${BUILDDIRARMV7} -buildarmv7s ${BUILDDIRARMV7S}
iosdmg: all pkgscripts/makemacpkg pkgscripts/uninstall
sh pkgscripts/makemacpkg -buildarmv7 ${BUILDDIRARMV7} -buildarmv7s ${BUILDDIRARMV7S} -buildarmv8 ${BUILDDIRARMV8} -lipo "${LIPO}"
endif
dmg: all
dmg: all pkgscripts/makemacpkg pkgscripts/uninstall
sh pkgscripts/makemacpkg
cygwinpkg: all
pkgscripts/makecygwinpkg: pkgscripts/makecygwinpkg.tmpl
cat pkgscripts/makecygwinpkg.tmpl | sed s@%{__prefix}@$(prefix)@g | \
sed s@%{__docdir}@$(docdir)@g | sed s@%{__libdir}@$(libdir)@g \
> pkgscripts/makecygwinpkg
cygwinpkg: all pkgscripts/makecygwinpkg
sh pkgscripts/makecygwinpkg

475
README-turbo.txt
View File

@@ -1,475 +0,0 @@
*******************************************************************************
** Background
*******************************************************************************
libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2,
NEON) to accelerate baseline JPEG compression and decompression on x86, x86-64,
and ARM systems. On such systems, libjpeg-turbo is generally 2-4x as fast as
libjpeg, all else being equal. On other types of systems, libjpeg-turbo can
still outperform libjpeg by a significant amount, by virtue of its
highly-optimized Huffman coding routines. In many cases, the performance of
libjpeg-turbo rivals that of proprietary high-speed JPEG codecs.
libjpeg-turbo implements both the traditional libjpeg API as well as the less
powerful but more straightforward TurboJPEG API. libjpeg-turbo also features
colorspace extensions that allow it to compress from/decompress to 32-bit and
big-endian pixel buffers (RGBX, XBGR, etc.), as well as a full-featured Java
interface.
libjpeg-turbo was originally based on libjpeg/SIMD, an MMX-accelerated
derivative of libjpeg v6b developed by Miyasaka Masaru. The TigerVNC and
VirtualGL projects made numerous enhancements to the codec in 2009, and in
early 2010, libjpeg-turbo spun off into an independent project, with the goal
of making high-speed JPEG compression/decompression technology available to a
broader range of users and developers.
*******************************************************************************
** License
*******************************************************************************
Most of libjpeg-turbo inherits the non-restrictive, BSD-style license used by
libjpeg (see README.) The TurboJPEG wrapper (both C and Java versions) and
associated test programs bear a similar license, which is reproduced below:
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
- Neither the name of the libjpeg-turbo Project nor the names of its
contributors may be used to endorse or promote products derived from this
software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS",
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************
** Using libjpeg-turbo
*******************************************************************************
libjpeg-turbo includes two APIs that can be used to compress and decompress
JPEG images:
TurboJPEG API: This API provides an easy-to-use interface for compressing
and decompressing JPEG images in memory. It also provides some functionality
that would not be straightforward to achieve using the underlying libjpeg
API, such as generating planar YUV images and performing multiple
simultaneous lossless transforms on an image. The Java interface for
libjpeg-turbo is written on top of the TurboJPEG API.
libjpeg API: This is the de facto industry-standard API for compressing and
decompressing JPEG images. It is more difficult to use than the TurboJPEG
API but also more powerful. The libjpeg API implementation in libjpeg-turbo
is both API/ABI-compatible and mathematically compatible with libjpeg v6b.
It can also optionally be configured to be API/ABI-compatible with libjpeg v7
and v8 (see below.)
There is no significant performance advantage to either API when both are used
to perform similar operations.
======================
Installation Directory
======================
This document assumes that libjpeg-turbo will be installed in the default
directory (/opt/libjpeg-turbo on Un*x and Mac systems and
c:\libjpeg-turbo[-gcc][64] on Windows systems. If your installation of
libjpeg-turbo resides in a different directory, then adjust the instructions
accordingly.
=============================
Replacing libjpeg at Run Time
=============================
Un*x
----
If a Un*x application is dynamically linked with libjpeg, then you can replace
libjpeg with libjpeg-turbo at run time by manipulating LD_LIBRARY_PATH.
For instance:
[Using libjpeg]
> time cjpeg <vgl_5674_0098.ppm >vgl_5674_0098.jpg
real 0m0.392s
user 0m0.074s
sys 0m0.020s
[Using libjpeg-turbo]
> export LD_LIBRARY_PATH=/opt/libjpeg-turbo/{lib}:$LD_LIBRARY_PATH
> time cjpeg <vgl_5674_0098.ppm >vgl_5674_0098.jpg
real 0m0.109s
user 0m0.029s
sys 0m0.010s
({lib} = lib32 or lib64, depending on whether you wish to use the 32-bit or the
64-bit version of libjpeg-turbo.)
System administrators can also replace the libjpeg symlinks in /usr/lib* with
links to the libjpeg-turbo dynamic library located in /opt/libjpeg-turbo/{lib}.
This will effectively accelerate every application that uses the libjpeg
dynamic library on the system.
Windows
-------
If a Windows application is dynamically linked with libjpeg, then you can
replace libjpeg with libjpeg-turbo at run time by backing up the application's
copy of jpeg62.dll, jpeg7.dll, or jpeg8.dll (assuming the application has its
own local copy of this library) and copying the corresponding DLL from
libjpeg-turbo into the application's install directory. The official
libjpeg-turbo binary packages only provide jpeg62.dll. If the application uses
jpeg7.dll or jpeg8.dll instead, then it will be necessary to build
libjpeg-turbo from source (see "libjpeg v7 and v8 API/ABI Emulation" below.)
The following information is specific to the official libjpeg-turbo binary
packages for Visual C++:
-- jpeg62.dll requires the Visual C++ 2008 C run-time DLL (msvcr90.dll).
msvcr90.dll ships with more recent versions of Windows, but users of older
Windows releases can obtain it from the Visual C++ 2008 Redistributable
Package, which is available as a free download from Microsoft's web site.
-- Features of the libjpeg API that require passing a C run-time structure,
such as a file handle, from an application to the library will probably not
work with jpeg62.dll, unless the application is also built to use the Visual
C++ 2008 C run-time DLL. In particular, this affects jpeg_stdio_dest() and
jpeg_stdio_src().
Mac
---
Mac applications typically embed their own copies of the libjpeg dylib inside
the (hidden) application bundle, so it is not possible to globally replace
libjpeg on OS X systems. Replacing the application's version of the libjpeg
dylib would generally involve copying libjpeg.*.dylib from libjpeg-turbo into
the appropriate place in the application bundle and using install_name_tool to
repoint the libjpeg-turbo dylib to its new directory. This requires an
advanced knowledge of OS X and would not survive an upgrade or a re-install of
the application. Thus, it is not recommended for most users.
========================================
Using libjpeg-turbo in Your Own Programs
========================================
For the most part, libjpeg-turbo should work identically to libjpeg, so in
most cases, an application can be built against libjpeg and then run against
libjpeg-turbo. On Un*x systems and Cygwin, you can build against libjpeg-turbo
instead of libjpeg by setting
CPATH=/opt/libjpeg-turbo/include
and
LIBRARY_PATH=/opt/libjpeg-turbo/{lib}
({lib} = lib32 or lib64, depending on whether you are building a 32-bit or a
64-bit application.)
If using MinGW, then set
CPATH=/c/libjpeg-turbo-gcc[64]/include
and
LIBRARY_PATH=/c/libjpeg-turbo-gcc[64]/lib
Building against libjpeg-turbo is useful, for instance, if you want to build an
application that leverages the libjpeg-turbo colorspace extensions (see below.)
On Un*x systems, you would still need to manipulate LD_LIBRARY_PATH or create
appropriate symlinks to use libjpeg-turbo at run time. On such systems, you
can pass -R /opt/libjpeg-turbo/{lib} to the linker to force the use of
libjpeg-turbo at run time rather than libjpeg (also useful if you want to
leverage the colorspace extensions), or you can link against the libjpeg-turbo
static library.
To force a Un*x or MinGW application to link against the static version of
libjpeg-turbo, you can use the following linker options:
-Wl,-Bstatic -ljpeg -Wl,-Bdynamic
On OS X, simply add /opt/libjpeg-turbo/lib/libjpeg.a to the linker command
line.
To build Visual C++ applications using libjpeg-turbo, add
c:\libjpeg-turbo[64]\include to the system or user INCLUDE environment
variable and c:\libjpeg-turbo[64]\lib to the system or user LIB environment
variable, and then link against either jpeg.lib (to use the DLL version of
libjpeg-turbo) or jpeg-static.lib (to use the static version of libjpeg-turbo.)
=====================
Colorspace Extensions
=====================
libjpeg-turbo includes extensions that allow JPEG images to be compressed
directly from (and decompressed directly to) buffers that use BGR, BGRX,
RGBX, XBGR, and XRGB pixel ordering. This is implemented with ten new
colorspace constants:
JCS_EXT_RGB /* red/green/blue */
JCS_EXT_RGBX /* red/green/blue/x */
JCS_EXT_BGR /* blue/green/red */
JCS_EXT_BGRX /* blue/green/red/x */
JCS_EXT_XBGR /* x/blue/green/red */
JCS_EXT_XRGB /* x/red/green/blue */
JCS_EXT_RGBA /* red/green/blue/alpha */
JCS_EXT_BGRA /* blue/green/red/alpha */
JCS_EXT_ABGR /* alpha/blue/green/red */
JCS_EXT_ARGB /* alpha/red/green/blue */
Setting cinfo.in_color_space (compression) or cinfo.out_color_space
(decompression) to one of these values will cause libjpeg-turbo to read the
red, green, and blue values from (or write them to) the appropriate position in
the pixel when compressing from/decompressing to an RGB buffer.
Your application can check for the existence of these extensions at compile
time with:
#ifdef JCS_EXTENSIONS
At run time, attempting to use these extensions with a libjpeg implementation
that does not support them will result in a "Bogus input colorspace" error.
Applications can trap this error in order to test whether run-time support is
available for the colorspace extensions.
When using the RGBX, BGRX, XBGR, and XRGB colorspaces during decompression, the
X byte is undefined, and in order to ensure the best performance, libjpeg-turbo
can set that byte to whatever value it wishes. If an application expects the X
byte to be used as an alpha channel, then it should specify JCS_EXT_RGBA,
JCS_EXT_BGRA, JCS_EXT_ABGR, or JCS_EXT_ARGB. When these colorspace constants
are used, the X byte is guaranteed to be 0xFF, which is interpreted as opaque.
Your application can check for the existence of the alpha channel colorspace
extensions at compile time with:
#ifdef JCS_ALPHA_EXTENSIONS
jcstest.c, located in the libjpeg-turbo source tree, demonstrates how to check
for the existence of the colorspace extensions at compile time and run time.
===================================
libjpeg v7 and v8 API/ABI Emulation
===================================
With libjpeg v7 and v8, new features were added that necessitated extending the
compression and decompression structures. Unfortunately, due to the exposed
nature of those structures, extending them also necessitated breaking backward
ABI compatibility with previous libjpeg releases. Thus, programs that were
built to use libjpeg v7 or v8 did not work with libjpeg-turbo, since it is
based on the libjpeg v6b code base. Although libjpeg v7 and v8 are still not
as widely used as v6b, enough programs (including a few Linux distros) made
the switch that there was a demand to emulate the libjpeg v7 and v8 ABIs
in libjpeg-turbo. It should be noted, however, that this feature was added
primarily so that applications that had already been compiled to use libjpeg
v7+ could take advantage of accelerated baseline JPEG encoding/decoding
without recompiling. libjpeg-turbo does not claim to support all of the
libjpeg v7+ features, nor to produce identical output to libjpeg v7+ in all
cases (see below.)
By passing an argument of --with-jpeg7 or --with-jpeg8 to configure, or an
argument of -DWITH_JPEG7=1 or -DWITH_JPEG8=1 to cmake, you can build a version
of libjpeg-turbo that emulates the libjpeg v7 or v8 ABI, so that programs
that are built against libjpeg v7 or v8 can be run with libjpeg-turbo. The
following section describes which libjpeg v7+ features are supported and which
aren't.
Support for libjpeg v7 and v8 Features:
---------------------------------------
Fully supported:
-- libjpeg: IDCT scaling extensions in decompressor
libjpeg-turbo supports IDCT scaling with scaling factors of 1/8, 1/4, 3/8,
1/2, 5/8, 3/4, 7/8, 9/8, 5/4, 11/8, 3/2, 13/8, 7/4, 15/8, and 2/1 (only 1/4
and 1/2 are SIMD-accelerated.)
-- libjpeg: arithmetic coding
-- libjpeg: In-memory source and destination managers
See notes below.
-- cjpeg: Separate quality settings for luminance and chrominance
Note that the libpjeg v7+ API was extended to accommodate this feature only
for convenience purposes. It has always been possible to implement this
feature with libjpeg v6b (see rdswitch.c for an example.)
-- cjpeg: 32-bit BMP support
-- cjpeg: -rgb option
-- jpegtran: lossless cropping
-- jpegtran: -perfect option
-- jpegtran: forcing width/height when performing lossless crop
-- rdjpgcom: -raw option
-- rdjpgcom: locale awareness
Not supported:
NOTE: As of this writing, extensive research has been conducted into the
usefulness of DCT scaling as a means of data reduction and SmartScale as a
means of quality improvement. The reader is invited to peruse the research at
http://www.libjpeg-turbo.org/About/SmartScale and draw his/her own conclusions,
but it is the general belief of our project that these features have not
demonstrated sufficient usefulness to justify inclusion in libjpeg-turbo.
-- libjpeg: DCT scaling in compressor
cinfo.scale_num and cinfo.scale_denom are silently ignored.
There is no technical reason why DCT scaling could not be supported when
emulating the libjpeg v7+ API/ABI, but without the SmartScale extension (see
below), only scaling factors of 1/2, 8/15, 4/7, 8/13, 2/3, 8/11, 4/5, and
8/9 would be available, which is of limited usefulness.
-- libjpeg: SmartScale
cinfo.block_size is silently ignored.
SmartScale is an extension to the JPEG format that allows for DCT block
sizes other than 8x8. Providing support for this new format would be
feasible (particularly without full acceleration.) However, until/unless
the format becomes either an official industry standard or, at minimum, an
accepted solution in the community, we are hesitant to implement it, as
there is no sense of whether or how it might change in the future. It is
our belief that SmartScale has not demonstrated sufficient usefulness as a
lossless format nor as a means of quality enhancement, and thus, our primary
interest in providing this feature would be as a means of supporting
additional DCT scaling factors.
-- libjpeg: Fancy downsampling in compressor
cinfo.do_fancy_downsampling is silently ignored.
This requires the DCT scaling feature, which is not supported.
-- jpegtran: Scaling
This requires both the DCT scaling and SmartScale features, which are not
supported.
-- Lossless RGB JPEG files
This requires the SmartScale feature, which is not supported.
What About libjpeg v9?
----------------------
libjpeg v9 introduced yet another field to the JPEG compression structure
(color_transform), thus making the ABI backward incompatible with that of
libjpeg v8. This new field was introduced solely for the purpose of supporting
lossless SmartScale encoding. Further, there was actually no reason to extend
the API in this manner, as the color transform could have just as easily been
activated by way of a new JPEG colorspace constant, thus preserving backward
ABI compatibility.
Our research (see link above) has shown that lossless SmartScale does not
generally accomplish anything that can't already be accomplished better with
existing, standard lossless formats. Thus, at this time, it is our belief that
there is not sufficient technical justification for software to upgrade from
libjpeg v8 to libjpeg v9, and therefore, not sufficient technical justification
for us to emulate the libjpeg v9 ABI.
=====================================
In-Memory Source/Destination Managers
=====================================
By default, libjpeg-turbo 1.3 and later includes the jpeg_mem_src() and
jpeg_mem_dest() functions, even when not emulating the libjpeg v8 API/ABI.
Previously, it was necessary to build libjpeg-turbo from source with libjpeg v8
API/ABI emulation in order to use the in-memory source/destination managers,
but several projects requested that those functions be included when emulating
the libjpeg v6b API/ABI as well. This allows the use of those functions by
programs that need them without breaking ABI compatibility for programs that
don't, and it allows those functions to be provided in the "official"
libjpeg-turbo binaries.
Those who are concerned about maintaining strict conformance with the libjpeg
v6b or v7 API can pass an argument of --without-mem-srcdst to configure or
an argument of -DWITH_MEM_SRCDST=0 to CMake prior to building libjpeg-turbo.
This will restore the pre-1.3 behavior, in which jpeg_mem_src() and
jpeg_mem_dest() are only included when emulating the libjpeg v8 API/ABI.
On Un*x systems, including the in-memory source/destination managers changes
the dynamic library version from 62.0.0 to 62.1.0 if using libjpeg v6b API/ABI
emulation and from 7.0.0 to 7.1.0 if using libjpeg v7 API/ABI emulation.
Note that, on most Un*x systems, the dynamic linker will not look for a
function in a library until that function is actually used. Thus, if a program
is built against libjpeg-turbo 1.3+ and uses jpeg_mem_src() or jpeg_mem_dest(),
that program will not fail if run against an older version of libjpeg-turbo or
against libjpeg v7- until the program actually tries to call jpeg_mem_src() or
jpeg_mem_dest(). Such is not the case on Windows. If a program is built
against the libjpeg-turbo 1.3+ DLL and uses jpeg_mem_src() or jpeg_mem_dest(),
then it must use the libjpeg-turbo 1.3+ DLL at run time.
Both cjpeg and djpeg have been extended to allow testing the in-memory
source/destination manager functions. See their respective man pages for more
details.
*******************************************************************************
** Mathematical Compatibility
*******************************************************************************
For the most part, libjpeg-turbo should produce identical output to libjpeg
v6b. The one exception to this is when using the floating point DCT/IDCT, in
which case the outputs of libjpeg v6b and libjpeg-turbo are not guaranteed to
be identical (the accuracy of the floating point DCT/IDCT is constant when
using libjpeg-turbo's SIMD extensions, but otherwise, it can depend heavily on
the compiler and compiler settings.)
While libjpeg-turbo does emulate the libjpeg v8 API/ABI, under the hood, it is
still using the same algorithms as libjpeg v6b, so there are several specific
cases in which libjpeg-turbo cannot be expected to produce the same output as
libjpeg v8:
-- When decompressing using scaling factors of 1/2 and 1/4, because libjpeg v8
implements those scaling algorithms a bit differently than libjpeg v6b does,
and libjpeg-turbo's SIMD extensions are based on the libjpeg v6b behavior.
-- When using chrominance subsampling, because libjpeg v8 implements this
with its DCT/IDCT scaling algorithms rather than with a separate
downsampling/upsampling algorithm.
-- When using the floating point IDCT, for the reasons stated above and also
because the floating point IDCT algorithm was modified in libjpeg v8a to
improve accuracy.
-- When decompressing using a scaling factor > 1 and merged (AKA "non-fancy" or
"non-smooth") chrominance upsampling, because libjpeg v8 does not support
merged upsampling with scaling factors > 1.
*******************************************************************************
** Performance Pitfalls
*******************************************************************************
===============
Restart Markers
===============
The optimized Huffman decoder in libjpeg-turbo does not handle restart markers
in a way that makes the rest of the libjpeg infrastructure happy, so it is
necessary to use the slow Huffman decoder when decompressing a JPEG image that
has restart markers. This can cause the decompression performance to drop by
as much as 20%, but the performance will still be much greater than that of
libjpeg. Many consumer packages, such as PhotoShop, use restart markers when
generating JPEG images, so images generated by those programs will experience
this issue.
===============================================
Fast Integer Forward DCT at High Quality Levels
===============================================
The algorithm used by the SIMD-accelerated quantization function cannot produce
correct results whenever the fast integer forward DCT is used along with a JPEG
quality of 98-100. Thus, libjpeg-turbo must use the non-SIMD quantization
function in those cases. This causes performance to drop by as much as 40%.
It is therefore strongly advised that you use the slow integer forward DCT
whenever encoding images with a JPEG quality of 98 or higher.

31
README → README.ijg
View File

@@ -1,7 +1,7 @@
libjpeg-turbo note: This file has been modified by The libjpeg-turbo Project
to include only information relevant to libjpeg-turbo, to wordsmith certain
sections, and to remove impolitic language that existed in the libjpeg v8
README. It is included only for reference. Please see README-turbo.txt for
README. It is included only for reference. Please see README.md for
information specific to libjpeg-turbo.
@@ -36,7 +36,6 @@ TO DO Plans for future IJG releases.
Other documentation files in the distribution are:
User documentation:
install.txt How to configure and install the IJG software.
usage.txt Usage instructions for cjpeg, djpeg, jpegtran,
rdjpgcom, and wrjpgcom.
*.1 Unix-style man pages for programs (same info as usage.txt).
@@ -48,9 +47,9 @@ Programmer and internal documentation:
structure.txt Overview of the JPEG library's internal structure.
coderules.txt Coding style rules --- please read if you contribute code.
Please read at least the files install.txt and usage.txt. Some information
can also be found in the JPEG FAQ (Frequently Asked Questions) article. See
ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
Please read at least usage.txt. Some information can also be found in the JPEG
FAQ (Frequently Asked Questions) article. See ARCHIVE LOCATIONS below to find
out where to obtain the FAQ article.
If you want to understand how the JPEG code works, we suggest reading one or
more of the REFERENCES, then looking at the documentation files (in roughly
@@ -62,7 +61,7 @@ OVERVIEW
This package contains C software to implement JPEG image encoding, decoding,
and transcoding. JPEG (pronounced "jay-peg") is a standardized compression
method for full-color and gray-scale images. JPEG's strong suit is compressing
method for full-color and grayscale images. JPEG's strong suit is compressing
photographic images or other types of images that have smooth color and
brightness transitions between neighboring pixels. Images with sharp lines or
other abrupt features may not compress well with JPEG, and a higher JPEG
@@ -129,7 +128,7 @@ with respect to this software, its quality, accuracy, merchantability, or
fitness for a particular purpose. This software is provided "AS IS", and you,
its user, assume the entire risk as to its quality and accuracy.
This software is copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
This software is copyright (C) 1991-2016, Thomas G. Lane, Guido Vollbeding.
All Rights Reserved except as specified below.
Permission is hereby granted to use, copy, modify, and distribute this
@@ -167,11 +166,11 @@ ltmain.sh). Another support script, install-sh, is copyright by X Consortium
but is also freely distributable.
The IJG distribution formerly included code to read and write GIF files.
To avoid entanglement with the Unisys LZW patent, GIF reading support has
been removed altogether, and the GIF writer has been simplified to produce
"uncompressed GIFs". This technique does not use the LZW algorithm; the
resulting GIF files are larger than usual, but are readable by all standard
GIF decoders.
To avoid entanglement with the Unisys LZW patent (now expired), GIF reading
support has been removed altogether, and the GIF writer has been simplified
to produce "uncompressed GIFs". This technique does not use the LZW
algorithm; the resulting GIF files are larger than usual, but are readable
by all standard GIF decoders.
We are required to state that
"The Graphics Interchange Format(c) is the Copyright property of
@@ -190,8 +189,8 @@ The best short technical introduction to the JPEG compression algorithm is
Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
(Adjacent articles in that issue discuss MPEG motion picture compression,
applications of JPEG, and related topics.) If you don't have the CACM issue
handy, a PostScript file containing a revised version of Wallace's article is
available at http://www.ijg.org/files/wallace.ps.gz. The file (actually
handy, a PDF file containing a revised version of Wallace's article is
available at http://www.ijg.org/files/Wallace.JPEG.pdf. The file (actually
a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
omits the sample images that appeared in CACM, but it includes corrections
and some added material. Note: the Wallace article is copyright ACM and IEEE,
@@ -247,9 +246,7 @@ ARCHIVE LOCATIONS
The "official" archive site for this software is www.ijg.org.
The most recent released version can always be found there in
directory "files". This particular version will be archived as
http://www.ijg.org/files/jpegsrc.v8d.tar.gz, and in Windows-compatible
"zip" archive format as http://www.ijg.org/files/jpegsr8d.zip.
directory "files".
The JPEG FAQ (Frequently Asked Questions) article is a source of some
general information about JPEG.

341
README.md Executable file
View File

@@ -0,0 +1,341 @@
Background
==========
libjpeg-turbo is a JPEG image codec that uses SIMD instructions (MMX, SSE2,
NEON, AltiVec) to accelerate baseline JPEG compression and decompression on
x86, x86-64, ARM, and PowerPC systems. On such systems, libjpeg-turbo is
generally 2-6x as fast as libjpeg, all else being equal. On other types of
systems, libjpeg-turbo can still outperform libjpeg by a significant amount, by
virtue of its highly-optimized Huffman coding routines. In many cases, the
performance of libjpeg-turbo rivals that of proprietary high-speed JPEG codecs.
libjpeg-turbo implements both the traditional libjpeg API as well as the less
powerful but more straightforward TurboJPEG API. libjpeg-turbo also features
colorspace extensions that allow it to compress from/decompress to 32-bit and
big-endian pixel buffers (RGBX, XBGR, etc.), as well as a full-featured Java
interface.
libjpeg-turbo was originally based on libjpeg/SIMD, an MMX-accelerated
derivative of libjpeg v6b developed by Miyasaka Masaru. The TigerVNC and
VirtualGL projects made numerous enhancements to the codec in 2009, and in
early 2010, libjpeg-turbo spun off into an independent project, with the goal
of making high-speed JPEG compression/decompression technology available to a
broader range of users and developers.
License
=======
libjpeg-turbo is covered by three compatible BSD-style open source licenses.
Refer to [LICENSE.md](LICENSE.md) for a roll-up of license terms.
Building libjpeg-turbo
======================
Refer to [BUILDING.md](BUILDING.md) for complete instructions.
Using libjpeg-turbo
===================
libjpeg-turbo includes two APIs that can be used to compress and decompress
JPEG images:
- **TurboJPEG API**
This API provides an easy-to-use interface for compressing and decompressing
JPEG images in memory. It also provides some functionality that would not be
straightforward to achieve using the underlying libjpeg API, such as
generating planar YUV images and performing multiple simultaneous lossless
transforms on an image. The Java interface for libjpeg-turbo is written on
top of the TurboJPEG API.
- **libjpeg API**
This is the de facto industry-standard API for compressing and decompressing
JPEG images. It is more difficult to use than the TurboJPEG API but also
more powerful. The libjpeg API implementation in libjpeg-turbo is both
API/ABI-compatible and mathematically compatible with libjpeg v6b. It can
also optionally be configured to be API/ABI-compatible with libjpeg v7 and v8
(see below.)
There is no significant performance advantage to either API when both are used
to perform similar operations.
Colorspace Extensions
---------------------
libjpeg-turbo includes extensions that allow JPEG images to be compressed
directly from (and decompressed directly to) buffers that use BGR, BGRX,
RGBX, XBGR, and XRGB pixel ordering. This is implemented with ten new
colorspace constants:
JCS_EXT_RGB /* red/green/blue */
JCS_EXT_RGBX /* red/green/blue/x */
JCS_EXT_BGR /* blue/green/red */
JCS_EXT_BGRX /* blue/green/red/x */
JCS_EXT_XBGR /* x/blue/green/red */
JCS_EXT_XRGB /* x/red/green/blue */
JCS_EXT_RGBA /* red/green/blue/alpha */
JCS_EXT_BGRA /* blue/green/red/alpha */
JCS_EXT_ABGR /* alpha/blue/green/red */
JCS_EXT_ARGB /* alpha/red/green/blue */
Setting `cinfo.in_color_space` (compression) or `cinfo.out_color_space`
(decompression) to one of these values will cause libjpeg-turbo to read the
red, green, and blue values from (or write them to) the appropriate position in
the pixel when compressing from/decompressing to an RGB buffer.
Your application can check for the existence of these extensions at compile
time with:
#ifdef JCS_EXTENSIONS
At run time, attempting to use these extensions with a libjpeg implementation
that does not support them will result in a "Bogus input colorspace" error.
Applications can trap this error in order to test whether run-time support is
available for the colorspace extensions.
When using the RGBX, BGRX, XBGR, and XRGB colorspaces during decompression, the
X byte is undefined, and in order to ensure the best performance, libjpeg-turbo
can set that byte to whatever value it wishes. If an application expects the X
byte to be used as an alpha channel, then it should specify `JCS_EXT_RGBA`,
`JCS_EXT_BGRA`, `JCS_EXT_ABGR`, or `JCS_EXT_ARGB`. When these colorspace
constants are used, the X byte is guaranteed to be 0xFF, which is interpreted
as opaque.
Your application can check for the existence of the alpha channel colorspace
extensions at compile time with:
#ifdef JCS_ALPHA_EXTENSIONS
[jcstest.c](jcstest.c), located in the libjpeg-turbo source tree, demonstrates
how to check for the existence of the colorspace extensions at compile time and
run time.
libjpeg v7 and v8 API/ABI Emulation
-----------------------------------
With libjpeg v7 and v8, new features were added that necessitated extending the
compression and decompression structures. Unfortunately, due to the exposed
nature of those structures, extending them also necessitated breaking backward
ABI compatibility with previous libjpeg releases. Thus, programs that were
built to use libjpeg v7 or v8 did not work with libjpeg-turbo, since it is
based on the libjpeg v6b code base. Although libjpeg v7 and v8 are not
as widely used as v6b, enough programs (including a few Linux distros) made
the switch that there was a demand to emulate the libjpeg v7 and v8 ABIs
in libjpeg-turbo. It should be noted, however, that this feature was added
primarily so that applications that had already been compiled to use libjpeg
v7+ could take advantage of accelerated baseline JPEG encoding/decoding
without recompiling. libjpeg-turbo does not claim to support all of the
libjpeg v7+ features, nor to produce identical output to libjpeg v7+ in all
cases (see below.)
By passing an argument of `--with-jpeg7` or `--with-jpeg8` to `configure`, or
an argument of `-DWITH_JPEG7=1` or `-DWITH_JPEG8=1` to `cmake`, you can build a
version of libjpeg-turbo that emulates the libjpeg v7 or v8 ABI, so that
programs that are built against libjpeg v7 or v8 can be run with libjpeg-turbo.
The following section describes which libjpeg v7+ features are supported and
which aren't.
### Support for libjpeg v7 and v8 Features
#### Fully supported
- **libjpeg: IDCT scaling extensions in decompressor**
libjpeg-turbo supports IDCT scaling with scaling factors of 1/8, 1/4, 3/8,
1/2, 5/8, 3/4, 7/8, 9/8, 5/4, 11/8, 3/2, 13/8, 7/4, 15/8, and 2/1 (only 1/4
and 1/2 are SIMD-accelerated.)
- **libjpeg: Arithmetic coding**
- **libjpeg: In-memory source and destination managers**
See notes below.
- **cjpeg: Separate quality settings for luminance and chrominance**
Note that the libpjeg v7+ API was extended to accommodate this feature only
for convenience purposes. It has always been possible to implement this
feature with libjpeg v6b (see rdswitch.c for an example.)
- **cjpeg: 32-bit BMP support**
- **cjpeg: `-rgb` option**
- **jpegtran: Lossless cropping**
- **jpegtran: `-perfect` option**
- **jpegtran: Forcing width/height when performing lossless crop**
- **rdjpgcom: `-raw` option**
- **rdjpgcom: Locale awareness**
#### Not supported
NOTE: As of this writing, extensive research has been conducted into the
usefulness of DCT scaling as a means of data reduction and SmartScale as a
means of quality improvement. The reader is invited to peruse the research at
<http://www.libjpeg-turbo.org/About/SmartScale> and draw his/her own conclusions,
but it is the general belief of our project that these features have not
demonstrated sufficient usefulness to justify inclusion in libjpeg-turbo.
- **libjpeg: DCT scaling in compressor**
`cinfo.scale_num` and `cinfo.scale_denom` are silently ignored.
There is no technical reason why DCT scaling could not be supported when
emulating the libjpeg v7+ API/ABI, but without the SmartScale extension (see
below), only scaling factors of 1/2, 8/15, 4/7, 8/13, 2/3, 8/11, 4/5, and
8/9 would be available, which is of limited usefulness.
- **libjpeg: SmartScale**
`cinfo.block_size` is silently ignored.
SmartScale is an extension to the JPEG format that allows for DCT block
sizes other than 8x8. Providing support for this new format would be
feasible (particularly without full acceleration.) However, until/unless
the format becomes either an official industry standard or, at minimum, an
accepted solution in the community, we are hesitant to implement it, as
there is no sense of whether or how it might change in the future. It is
our belief that SmartScale has not demonstrated sufficient usefulness as a
lossless format nor as a means of quality enhancement, and thus our primary
interest in providing this feature would be as a means of supporting
additional DCT scaling factors.
- **libjpeg: Fancy downsampling in compressor**
`cinfo.do_fancy_downsampling` is silently ignored.
This requires the DCT scaling feature, which is not supported.
- **jpegtran: Scaling**
This requires both the DCT scaling and SmartScale features, which are not
supported.
- **Lossless RGB JPEG files**
This requires the SmartScale feature, which is not supported.
### What About libjpeg v9?
libjpeg v9 introduced yet another field to the JPEG compression structure
(`color_transform`), thus making the ABI backward incompatible with that of
libjpeg v8. This new field was introduced solely for the purpose of supporting
lossless SmartScale encoding. Furthermore, there was actually no reason to
extend the API in this manner, as the color transform could have just as easily
been activated by way of a new JPEG colorspace constant, thus preserving
backward ABI compatibility.
Our research (see link above) has shown that lossless SmartScale does not
generally accomplish anything that can't already be accomplished better with
existing, standard lossless formats. Therefore, at this time it is our belief
that there is not sufficient technical justification for software projects to
upgrade from libjpeg v8 to libjpeg v9, and thus there is not sufficient
echnical justification for us to emulate the libjpeg v9 ABI.
In-Memory Source/Destination Managers
-------------------------------------
By default, libjpeg-turbo 1.3 and later includes the `jpeg_mem_src()` and
`jpeg_mem_dest()` functions, even when not emulating the libjpeg v8 API/ABI.
Previously, it was necessary to build libjpeg-turbo from source with libjpeg v8
API/ABI emulation in order to use the in-memory source/destination managers,
but several projects requested that those functions be included when emulating
the libjpeg v6b API/ABI as well. This allows the use of those functions by
programs that need them, without breaking ABI compatibility for programs that
don't, and it allows those functions to be provided in the "official"
libjpeg-turbo binaries.
Those who are concerned about maintaining strict conformance with the libjpeg
v6b or v7 API can pass an argument of `--without-mem-srcdst` to `configure` or
an argument of `-DWITH_MEM_SRCDST=0` to `cmake` prior to building
libjpeg-turbo. This will restore the pre-1.3 behavior, in which
`jpeg_mem_src()` and `jpeg_mem_dest()` are only included when emulating the
libjpeg v8 API/ABI.
On Un*x systems, including the in-memory source/destination managers changes
the dynamic library version from 62.0.0 to 62.1.0 if using libjpeg v6b API/ABI
emulation and from 7.0.0 to 7.1.0 if using libjpeg v7 API/ABI emulation.
Note that, on most Un*x systems, the dynamic linker will not look for a
function in a library until that function is actually used. Thus, if a program
is built against libjpeg-turbo 1.3+ and uses `jpeg_mem_src()` or
`jpeg_mem_dest()`, that program will not fail if run against an older version
of libjpeg-turbo or against libjpeg v7- until the program actually tries to
call `jpeg_mem_src()` or `jpeg_mem_dest()`. Such is not the case on Windows.
If a program is built against the libjpeg-turbo 1.3+ DLL and uses
`jpeg_mem_src()` or `jpeg_mem_dest()`, then it must use the libjpeg-turbo 1.3+
DLL at run time.
Both cjpeg and djpeg have been extended to allow testing the in-memory
source/destination manager functions. See their respective man pages for more
details.
Mathematical Compatibility
==========================
For the most part, libjpeg-turbo should produce identical output to libjpeg
v6b. The one exception to this is when using the floating point DCT/IDCT, in
which case the outputs of libjpeg v6b and libjpeg-turbo can differ for the
following reasons:
- The SSE/SSE2 floating point DCT implementation in libjpeg-turbo is ever so
slightly more accurate than the implementation in libjpeg v6b, but not by
any amount perceptible to human vision (generally in the range of 0.01 to
0.08 dB gain in PNSR.)
- When not using the SIMD extensions, libjpeg-turbo uses the more accurate
(and slightly faster) floating point IDCT algorithm introduced in libjpeg
v8a as opposed to the algorithm used in libjpeg v6b. It should be noted,
however, that this algorithm basically brings the accuracy of the floating
point IDCT in line with the accuracy of the slow integer IDCT. The floating
point DCT/IDCT algorithms are mainly a legacy feature, and they do not
produce significantly more accuracy than the slow integer algorithms (to put
numbers on this, the typical difference in PNSR between the two algorithms
is less than 0.10 dB, whereas changing the quality level by 1 in the upper
range of the quality scale is typically more like a 1.0 dB difference.)
- If the floating point algorithms in libjpeg-turbo are not implemented using
SIMD instructions on a particular platform, then the accuracy of the
floating point DCT/IDCT can depend on the compiler settings.
While libjpeg-turbo does emulate the libjpeg v8 API/ABI, under the hood it is
still using the same algorithms as libjpeg v6b, so there are several specific
cases in which libjpeg-turbo cannot be expected to produce the same output as
libjpeg v8:
- When decompressing using scaling factors of 1/2 and 1/4, because libjpeg v8
implements those scaling algorithms differently than libjpeg v6b does, and
libjpeg-turbo's SIMD extensions are based on the libjpeg v6b behavior.
- When using chrominance subsampling, because libjpeg v8 implements this
with its DCT/IDCT scaling algorithms rather than with a separate
downsampling/upsampling algorithm. In our testing, the subsampled/upsampled
output of libjpeg v8 is less accurate than that of libjpeg v6b for this
reason.
- When decompressing using a scaling factor > 1 and merged (AKA "non-fancy" or
"non-smooth") chrominance upsampling, because libjpeg v8 does not support
merged upsampling with scaling factors > 1.
Performance Pitfalls
====================
Restart Markers
---------------
The optimized Huffman decoder in libjpeg-turbo does not handle restart markers
in a way that makes the rest of the libjpeg infrastructure happy, so it is
necessary to use the slow Huffman decoder when decompressing a JPEG image that
has restart markers. This can cause the decompression performance to drop by
as much as 20%, but the performance will still be much greater than that of
libjpeg. Many consumer packages, such as PhotoShop, use restart markers when
generating JPEG images, so images generated by those programs will experience
this issue.
Fast Integer Forward DCT at High Quality Levels
-----------------------------------------------
The algorithm used by the SIMD-accelerated quantization function cannot produce
correct results whenever the fast integer forward DCT is used along with a JPEG
quality of 98-100. Thus, libjpeg-turbo must use the non-SIMD quantization
function in those cases. This causes performance to drop by as much as 40%.
It is therefore strongly advised that you use the slow integer forward DCT
whenever encoding images with a JPEG quality of 98 or higher.

86
acinclude.m4
View File

@@ -3,8 +3,11 @@
# Check that NASM exists and determine flags
AC_DEFUN([AC_PROG_NASM],[
AC_CHECK_PROGS(NASM, [nasm nasmw yasm])
test -z "$NASM" && AC_MSG_ERROR([no nasm (Netwide Assembler) found])
AC_ARG_VAR(NASM, [NASM command (used to build the x86/x86-64 SIMD code)])
if test "x$NASM" = "x"; then
AC_CHECK_PROGS(NASM, [nasm nasmw yasm])
test -z "$NASM" && AC_MSG_ERROR([no nasm (Netwide Assembler) found])
fi
AC_MSG_CHECKING([for object file format of host system])
case "$host_os" in
@@ -40,7 +43,7 @@ case "$host_os" in
;;
esac
;;
freebsd* | netbsd* | openbsd*)
kfreebsd* | freebsd* | netbsd* | openbsd*)
if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
objfmt='BSD-a.out'
else
@@ -144,26 +147,95 @@ AC_DEFUN([AC_CHECK_COMPATIBLE_ARM_ASSEMBLER_IFELSE],[
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CCASFLAGS -x assembler-with-cpp"
CC="$CCAS"
AC_COMPILE_IFELSE([[
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
.text
.fpu neon
.arch armv7a
.object_arch armv4
.arm
pld [r0]
vmovn.u16 d0, q0]], ac_good_gnu_arm_assembler=yes)
vmovn.u16 d0, q0]])], ac_good_gnu_arm_assembler=yes)
ac_use_gas_preprocessor=no
if test "x$ac_good_gnu_arm_assembler" = "xno" ; then
CC="gas-preprocessor.pl $CCAS"
AC_COMPILE_IFELSE([[
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
.text
.fpu neon
.arch armv7a
.object_arch armv4
.arm
pld [r0]
vmovn.u16 d0, q0]], ac_use_gas_preprocessor=yes)
vmovn.u16 d0, q0]])], ac_use_gas_preprocessor=yes)
fi
CFLAGS="$ac_save_CFLAGS"
CC="$ac_save_CC"
if test "x$ac_use_gas_preprocessor" = "xyes" ; then
CCAS="gas-preprocessor.pl $CCAS"
AC_SUBST([CCAS])
ac_good_gnu_arm_assembler=yes
fi
if test "x$ac_good_gnu_arm_assembler" = "xyes" ; then
$1
else
$2
fi
])
# AC_CHECK_COMPATIBLE_MIPSEL_ASSEMBLER_IFELSE
# --------------------------
# Test whether the assembler is suitable and supports MIPS instructions
AC_DEFUN([AC_CHECK_COMPATIBLE_MIPS_ASSEMBLER_IFELSE],[
have_mips_dspr2=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CCASFLAGS -mdspr2"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
int main ()
{
int c = 0, a = 0, b = 0;
__asm__ __volatile__ (
"precr.qb.ph %[c], %[a], %[b] \n\t"
: [c] "=r" (c)
: [a] "r" (a), [b] "r" (b)
);
return c;
}
]])], have_mips_dspr2=yes)
CFLAGS=$ac_save_CFLAGS
if test "x$have_mips_dspr2" = "xyes" ; then
$1
else
$2
fi
])
AC_DEFUN([AC_CHECK_COMPATIBLE_ARM64_ASSEMBLER_IFELSE],[
ac_good_gnu_arm_assembler=no
ac_save_CC="$CC"
ac_save_CFLAGS="$CFLAGS"
CFLAGS="$CCASFLAGS -x assembler-with-cpp"
CC="$CCAS"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
.text
MYVAR .req x0
movi v0.16b, #100
mov MYVAR, #100
.unreq MYVAR]])], ac_good_gnu_arm_assembler=yes)
ac_use_gas_preprocessor=no
if test "x$ac_good_gnu_arm_assembler" = "xno" ; then
CC="gas-preprocessor.pl $CCAS"
AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
.text
MYVAR .req x0
movi v0.16b, #100
mov MYVAR, #100
.unreq MYVAR]])], ac_use_gas_preprocessor=yes)
fi
CFLAGS="$ac_save_CFLAGS"
CC="$ac_save_CC"

97
bmp.c
View File

@@ -1,5 +1,5 @@
/*
* Copyright (C)2011 D. R. Commander. All Rights Reserved.
* Copyright (C)2011, 2015 D. R. Commander. All Rights Reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
@@ -75,30 +75,97 @@ static void my_output_message(j_common_ptr cinfo)
static void pixelconvert(unsigned char *srcbuf, int srcpf, int srcbottomup,
unsigned char *dstbuf, int dstpf, int dstbottomup, int w, int h)
{
unsigned char *srcptr=srcbuf, *srcptr2;
unsigned char *srcrowptr=srcbuf, *srccolptr;
int srcps=tjPixelSize[srcpf];
int srcstride=srcbottomup? -w*srcps:w*srcps;
unsigned char *dstptr=dstbuf, *dstptr2;
unsigned char *dstrowptr=dstbuf, *dstcolptr;
int dstps=tjPixelSize[dstpf];
int dststride=dstbottomup? -w*dstps:w*dstps;
int row, col;
if(srcbottomup) srcptr=&srcbuf[w*srcps*(h-1)];
if(dstbottomup) dstptr=&dstbuf[w*dstps*(h-1)];
for(row=0; row<h; row++, srcptr+=srcstride, dstptr+=dststride)
if(srcbottomup) srcrowptr=&srcbuf[w*srcps*(h-1)];
if(dstbottomup) dstrowptr=&dstbuf[w*dstps*(h-1)];
/* NOTE: These quick & dirty CMYK<->RGB conversion routines are for testing
purposes only. Properly converting between CMYK and RGB requires a color
management system. */
if(dstpf==TJPF_CMYK)
{
for(col=0, srcptr2=srcptr, dstptr2=dstptr; col<w; col++, srcptr2+=srcps,
dstptr2+=dstps)
for(row=0; row<h; row++, srcrowptr+=srcstride, dstrowptr+=dststride)
{
dstptr2[tjRedOffset[dstpf]]=srcptr2[tjRedOffset[srcpf]];
dstptr2[tjGreenOffset[dstpf]]=srcptr2[tjGreenOffset[srcpf]];
dstptr2[tjBlueOffset[dstpf]]=srcptr2[tjBlueOffset[srcpf]];
for(col=0, srccolptr=srcrowptr, dstcolptr=dstrowptr;
col<w; col++, srccolptr+=srcps)
{
double c=1.0-((double)(srccolptr[tjRedOffset[srcpf]])/255.);
double m=1.0-((double)(srccolptr[tjGreenOffset[srcpf]])/255.);
double y=1.0-((double)(srccolptr[tjBlueOffset[srcpf]])/255.);
double k=min(min(c,m),min(y,1.0));
if(k==1.0) c=m=y=0.0;
else
{
c=(c-k)/(1.0-k);
m=(m-k)/(1.0-k);
y=(y-k)/(1.0-k);
}
if(c>1.0) c=1.0;
if(c<0.) c=0.;
if(m>1.0) m=1.0;
if(m<0.) m=0.;
if(y>1.0) y=1.0;
if(y<0.) y=0.;
if(k>1.0) k=1.0;
if(k<0.) k=0.;
*dstcolptr++=(unsigned char)(255.0-c*255.0+0.5);
*dstcolptr++=(unsigned char)(255.0-m*255.0+0.5);
*dstcolptr++=(unsigned char)(255.0-y*255.0+0.5);
*dstcolptr++=(unsigned char)(255.0-k*255.0+0.5);
}
}
}
else if(srcpf==TJPF_CMYK)
{
for(row=0; row<h; row++, srcrowptr+=srcstride, dstrowptr+=dststride)
{
for(col=0, srccolptr=srcrowptr, dstcolptr=dstrowptr;
col<w; col++, dstcolptr+=dstps)
{
double c=(double)(*srccolptr++);
double m=(double)(*srccolptr++);
double y=(double)(*srccolptr++);
double k=(double)(*srccolptr++);
double r=c*k/255.;
double g=m*k/255.;
double b=y*k/255.;
if(r>255.0) r=255.0;
if(r<0.) r=0.;
if(g>255.0) g=255.0;
if(g<0.) g=0.;
if(b>255.0) b=255.0;
if(b<0.) b=0.;
dstcolptr[tjRedOffset[dstpf]]=(unsigned char)(r+0.5);
dstcolptr[tjGreenOffset[dstpf]]=(unsigned char)(g+0.5);
dstcolptr[tjBlueOffset[dstpf]]=(unsigned char)(b+0.5);
}
}
}
else
{
for(row=0; row<h; row++, srcrowptr+=srcstride, dstrowptr+=dststride)
{
for(col=0, srccolptr=srcrowptr, dstcolptr=dstrowptr;
col<w; col++, srccolptr+=srcps, dstcolptr+=dstps)
{
dstcolptr[tjRedOffset[dstpf]]=srccolptr[tjRedOffset[srcpf]];
dstcolptr[tjGreenOffset[dstpf]]=srccolptr[tjGreenOffset[srcpf]];
dstcolptr[tjBlueOffset[dstpf]]=srccolptr[tjBlueOffset[srcpf]];
}
}
}
}
int loadbmp(char *filename, unsigned char **buf, int *w, int *h,
int loadbmp(char *filename, unsigned char **buf, int *w, int *h,
int dstpf, int bottomup)
{
int retval=0, dstps, srcpf, tempc;
@@ -169,7 +236,7 @@ int loadbmp(char *filename, unsigned char **buf, int *w, int *h,
nlines);
}
cinfo.next_scanline+=nlines;
}
}
(*src->finish_input)(&cinfo, src);
@@ -236,7 +303,7 @@ int savebmp(char *filename, unsigned char *buf, int w, int h, int srcpf,
_throw("savebmp(): Could not initialize PPM writer");
}
dst->output_file=file;
dst->output_file=file;
(*dst->start_output)(&dinfo, dst);
(*dinfo.mem->realize_virt_arrays)((j_common_ptr)&dinfo);
@@ -258,7 +325,7 @@ int savebmp(char *filename, unsigned char *buf, int w, int h, int srcpf,
}
(*dst->put_pixel_rows)(&dinfo, dst, nlines);
dinfo.output_scanline+=nlines;
}
}
(*dst->finish_output)(&dinfo, dst);

4
bmp.h
View File

@@ -39,8 +39,4 @@ int savebmp(char *filename, unsigned char *buf, int w, int h, int pf,
const char *bmpgeterr(void);
#ifdef __cplusplus
}
#endif
#endif

14
cderror.h
View File

@@ -4,7 +4,8 @@
* Copyright (C) 1994-1997, Thomas G. Lane.
* Modified 2009 by Guido Vollbeding.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
* For conditions of distribution and use, see the accompanying README.ijg
* file.
*
* This file defines the error and message codes for the cjpeg/djpeg
* applications. These strings are not needed as part of the JPEG library
@@ -33,7 +34,7 @@
typedef enum {
#define JMESSAGE(code,string) code ,
#define JMESSAGE(code,string) code ,
#endif /* JMAKE_ENUM_LIST */
@@ -62,7 +63,7 @@ JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file")
JMESSAGE(JERR_GIF_NOT, "Not a GIF file")
JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image")
JMESSAGE(JTRC_GIF_BADVERSION,
"Warning: unexpected GIF version number '%c%c%c'")
"Warning: unexpected GIF version number '%c%c%c'")
JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x")
JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input")
JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file")
@@ -74,6 +75,7 @@ JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
#ifdef PPM_SUPPORTED
JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
JMESSAGE(JERR_PPM_TOOLARGE, "Integer value too large in PPM file")
JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
JMESSAGE(JTRC_PGM, "%ux%u PGM image")
JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
@@ -110,13 +112,13 @@ JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled")
#endif /* TARGA_SUPPORTED */
JMESSAGE(JERR_BAD_CMAP_FILE,
"Color map file is invalid or of unsupported format")
"Color map file is invalid or of unsupported format")
JMESSAGE(JERR_TOO_MANY_COLORS,
"Output file format cannot handle %d colormap entries")
"Output file format cannot handle %d colormap entries")
JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed")
#ifdef TARGA_SUPPORTED
JMESSAGE(JERR_UNKNOWN_FORMAT,
"Unrecognized input file format --- perhaps you need -targa")
"Unrecognized input file format --- perhaps you need -targa")
#else
JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format")
#endif

79
cdjpeg.c
View File

@@ -1,60 +1,23 @@
/*
* cdjpeg.c
*
* This file was part of the Independent JPEG Group's software:
* Copyright (C) 1991-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
* It was modified by The libjpeg-turbo Project to include only code relevant
* to libjpeg-turbo.
* For conditions of distribution and use, see the accompanying README.ijg
* file.
*
* This file contains common support routines used by the IJG application
* programs (cjpeg, djpeg, jpegtran).
*/
#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
#include <ctype.h> /* to declare isupper(), tolower() */
#ifdef NEED_SIGNAL_CATCHER
#include <signal.h> /* to declare signal() */
#endif
#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
#include <ctype.h> /* to declare isupper(), tolower() */
#ifdef USE_SETMODE
#include <fcntl.h> /* to declare setmode()'s parameter macros */
#include <fcntl.h> /* to declare setmode()'s parameter macros */
/* If you have setmode() but not <io.h>, just delete this line: */
#include <io.h> /* to declare setmode() */
#endif
/*
* Signal catcher to ensure that temporary files are removed before aborting.
* NB: for Amiga Manx C this is actually a global routine named _abort();
* we put "#define signal_catcher _abort" in jconfig.h. Talk about bogus...
*/
#ifdef NEED_SIGNAL_CATCHER
static j_common_ptr sig_cinfo;
void /* must be global for Manx C */
signal_catcher (int signum)
{
if (sig_cinfo != NULL) {
if (sig_cinfo->err != NULL) /* turn off trace output */
sig_cinfo->err->trace_level = 0;
jpeg_destroy(sig_cinfo); /* clean up memory allocation & temp files */
}
exit(EXIT_FAILURE);
}
GLOBAL(void)
enable_signal_catcher (j_common_ptr cinfo)
{
sig_cinfo = cinfo;
#ifdef SIGINT /* not all systems have SIGINT */
signal(SIGINT, signal_catcher);
#endif
#ifdef SIGTERM /* not all systems have SIGTERM */
signal(SIGTERM, signal_catcher);
#endif
}
#include <io.h> /* to declare setmode() */
#endif
@@ -75,8 +38,8 @@ progress_monitor (j_common_ptr cinfo)
prog->percent_done = percent_done;
if (total_passes > 1) {
fprintf(stderr, "\rPass %d/%d: %3d%% ",
prog->pub.completed_passes + prog->completed_extra_passes + 1,
total_passes, percent_done);
prog->pub.completed_passes + prog->completed_extra_passes + 1,
total_passes, percent_done);
} else {
fprintf(stderr, "\r %3d%% ", percent_done);
}
@@ -119,24 +82,24 @@ end_progress_monitor (j_common_ptr cinfo)
*/
GLOBAL(boolean)
keymatch (char * arg, const char * keyword, int minchars)
keymatch (char *arg, const char *keyword, int minchars)
{
register int ca, ck;
register int nmatched = 0;
while ((ca = *arg++) != '\0') {
if ((ck = *keyword++) == '\0')
return FALSE; /* arg longer than keyword, no good */
if (isupper(ca)) /* force arg to lcase (assume ck is already) */
return FALSE; /* arg longer than keyword, no good */
if (isupper(ca)) /* force arg to lcase (assume ck is already) */
ca = tolower(ca);
if (ca != ck)
return FALSE; /* no good */
nmatched++; /* count matched characters */
return FALSE; /* no good */
nmatched++; /* count matched characters */
}
/* reached end of argument; fail if it's too short for unique abbrev */
if (nmatched < minchars)
return FALSE;
return TRUE; /* A-OK */
return TRUE; /* A-OK */
}
@@ -150,10 +113,10 @@ read_stdin (void)
{
FILE * input_file = stdin;
#ifdef USE_SETMODE /* need to hack file mode? */
#ifdef USE_SETMODE /* need to hack file mode? */
setmode(fileno(stdin), O_BINARY);
#endif
#ifdef USE_FDOPEN /* need to re-open in binary mode? */
#ifdef USE_FDOPEN /* need to re-open in binary mode? */
if ((input_file = fdopen(fileno(stdin), READ_BINARY)) == NULL) {
fprintf(stderr, "Cannot reopen stdin\n");
exit(EXIT_FAILURE);
@@ -168,10 +131,10 @@ write_stdout (void)
{
FILE * output_file = stdout;
#ifdef USE_SETMODE /* need to hack file mode? */
#ifdef USE_SETMODE /* need to hack file mode? */
setmode(fileno(stdout), O_BINARY);
#endif
#ifdef USE_FDOPEN /* need to re-open in binary mode? */
#ifdef USE_FDOPEN /* need to re-open in binary mode? */
if ((output_file = fdopen(fileno(stdout), WRITE_BINARY)) == NULL) {
fprintf(stderr, "Cannot reopen stdout\n");
exit(EXIT_FAILURE);

152
cdjpeg.h
View File

@@ -1,35 +1,35 @@
/*
* cdjpeg.h
*
* This file was part of the Independent JPEG Group's software:
* Copyright (C) 1994-1997, Thomas G. Lane.
* This file is part of the Independent JPEG Group's software.
* For conditions of distribution and use, see the accompanying README file.
* It was modified by The libjpeg-turbo Project to include only code relevant
* to libjpeg-turbo.
* For conditions of distribution and use, see the accompanying README.ijg
* file.
*
* This file contains common declarations for the sample applications
* cjpeg and djpeg. It is NOT used by the core JPEG library.
*/
#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */
#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */
#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */
#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */
#include "jinclude.h"
#include "jpeglib.h"
#include "jerror.h" /* get library error codes too */
#include "cderror.h" /* get application-specific error codes */
#include "jerror.h" /* get library error codes too */
#include "cderror.h" /* get application-specific error codes */
/*
* Object interface for cjpeg's source file decoding modules
*/
typedef struct cjpeg_source_struct * cjpeg_source_ptr;
typedef struct cjpeg_source_struct *cjpeg_source_ptr;
struct cjpeg_source_struct {
JMETHOD(void, start_input, (j_compress_ptr cinfo,
cjpeg_source_ptr sinfo));
JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo,
cjpeg_source_ptr sinfo));
JMETHOD(void, finish_input, (j_compress_ptr cinfo,
cjpeg_source_ptr sinfo));
void (*start_input) (j_compress_ptr cinfo, cjpeg_source_ptr sinfo);
JDIMENSION (*get_pixel_rows) (j_compress_ptr cinfo, cjpeg_source_ptr sinfo);
void (*finish_input) (j_compress_ptr cinfo, cjpeg_source_ptr sinfo);
FILE *input_file;
@@ -42,24 +42,21 @@ struct cjpeg_source_struct {
* Object interface for djpeg's output file encoding modules
*/
typedef struct djpeg_dest_struct * djpeg_dest_ptr;
typedef struct djpeg_dest_struct *djpeg_dest_ptr;
struct djpeg_dest_struct {
/* start_output is called after jpeg_start_decompress finishes.
* The color map will be ready at this time, if one is needed.
*/
JMETHOD(void, start_output, (j_decompress_ptr cinfo,
djpeg_dest_ptr dinfo));
void (*start_output) (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo);
/* Emit the specified number of pixel rows from the buffer. */
JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo,
djpeg_dest_ptr dinfo,
JDIMENSION rows_supplied));
void (*put_pixel_rows) (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo,
JDIMENSION rows_supplied);
/* Finish up at the end of the image. */
JMETHOD(void, finish_output, (j_decompress_ptr cinfo,
djpeg_dest_ptr dinfo));
void (*finish_output) (j_decompress_ptr cinfo, djpeg_dest_ptr dinfo);
/* Target file spec; filled in by djpeg.c after object is created. */
FILE * output_file;
FILE *output_file;
/* Output pixel-row buffer. Created by module init or start_output.
* Width is cinfo->output_width * cinfo->output_components;
@@ -79,109 +76,70 @@ struct djpeg_dest_struct {
*/
struct cdjpeg_progress_mgr {
struct jpeg_progress_mgr pub; /* fields known to JPEG library */
int completed_extra_passes; /* extra passes completed */
int total_extra_passes; /* total extra */
struct jpeg_progress_mgr pub; /* fields known to JPEG library */
int completed_extra_passes; /* extra passes completed */
int total_extra_passes; /* total extra */
/* last printed percentage stored here to avoid multiple printouts */
int percent_done;
};
typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
typedef struct cdjpeg_progress_mgr *cd_progress_ptr;
/* Short forms of external names for systems with brain-damaged linkers. */
#ifdef NEED_SHORT_EXTERNAL_NAMES
#define jinit_read_bmp jIRdBMP
#define jinit_write_bmp jIWrBMP
#define jinit_read_gif jIRdGIF
#define jinit_write_gif jIWrGIF
#define jinit_read_ppm jIRdPPM
#define jinit_write_ppm jIWrPPM
#define jinit_read_rle jIRdRLE
#define jinit_write_rle jIWrRLE
#define jinit_read_targa jIRdTarga
#define jinit_write_targa jIWrTarga
#define read_quant_tables RdQTables
#define read_scan_script RdScnScript
#define set_quality_ratings SetQRates
#define set_quant_slots SetQSlots
#define set_sample_factors SetSFacts
#define read_color_map RdCMap
#define enable_signal_catcher EnSigCatcher
#define start_progress_monitor StProgMon
#define end_progress_monitor EnProgMon
#define read_stdin RdStdin
#define write_stdout WrStdout
#endif /* NEED_SHORT_EXTERNAL_NAMES */
/* Module selection routines for I/O modules. */
EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo));
EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo,
boolean is_os2));
EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo));
EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo));
EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo));
EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo));
EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo));
EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo));
EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo));
EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
EXTERN(cjpeg_source_ptr) jinit_read_bmp (j_compress_ptr cinfo);
EXTERN(djpeg_dest_ptr) jinit_write_bmp (j_decompress_ptr cinfo,
boolean is_os2);
EXTERN(cjpeg_source_ptr) jinit_read_gif (j_compress_ptr cinfo);
EXTERN(djpeg_dest_ptr) jinit_write_gif (j_decompress_ptr cinfo);
EXTERN(cjpeg_source_ptr) jinit_read_ppm (j_compress_ptr cinfo);
EXTERN(djpeg_dest_ptr) jinit_write_ppm (j_decompress_ptr cinfo);
EXTERN(cjpeg_source_ptr) jinit_read_rle (j_compress_ptr cinfo);
EXTERN(djpeg_dest_ptr) jinit_write_rle (j_decompress_ptr cinfo);
EXTERN(cjpeg_source_ptr) jinit_read_targa (j_compress_ptr cinfo);
EXTERN(djpeg_dest_ptr) jinit_write_targa (j_decompress_ptr cinfo);
/* cjpeg support routines (in rdswitch.c) */
EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
boolean force_baseline));
EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg,
boolean force_baseline));
EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
EXTERN(boolean) read_quant_tables (j_compress_ptr cinfo, char *filename,
boolean force_baseline);
EXTERN(boolean) read_scan_script (j_compress_ptr cinfo, char *filename);
EXTERN(boolean) set_quality_ratings (j_compress_ptr cinfo, char *arg,
boolean force_baseline);
EXTERN(boolean) set_quant_slots (j_compress_ptr cinfo, char *arg);
EXTERN(boolean) set_sample_factors (j_compress_ptr cinfo, char *arg);
/* djpeg support routines (in rdcolmap.c) */
EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile));
EXTERN(void) read_color_map (j_decompress_ptr cinfo, FILE *infile);
/* common support routines (in cdjpeg.c) */
EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo));
EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo,
cd_progress_ptr progress));
EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo));
EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars));
EXTERN(FILE *) read_stdin JPP((void));
EXTERN(FILE *) write_stdout JPP((void));
EXTERN(void) enable_signal_catcher (j_common_ptr cinfo);
EXTERN(void) start_progress_monitor (j_common_ptr cinfo,
cd_progress_ptr progress);
EXTERN(void) end_progress_monitor (j_common_ptr cinfo);
EXTERN(boolean) keymatch (char *arg, const char *keyword, int minchars);
EXTERN(FILE *) read_stdin (void);
EXTERN(FILE *) write_stdout (void);
/* miscellaneous useful macros */
#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */
#define READ_BINARY "r"
#define WRITE_BINARY "w"
#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */
#define READ_BINARY "r"
#define WRITE_BINARY "w"
#else
#ifdef VMS /* VMS is very nonstandard */
#define READ_BINARY "rb", "ctx=stm"
#define WRITE_BINARY "wb", "ctx=stm"
#else /* standard ANSI-compliant case */
#define READ_BINARY "rb"
#define WRITE_BINARY "wb"
#endif
#define READ_BINARY "rb"
#define WRITE_BINARY "wb"
#endif
#ifndef EXIT_FAILURE /* define exit() codes if not provided */
#ifndef EXIT_FAILURE /* define exit() codes if not provided */
#define EXIT_FAILURE 1
#endif
#ifndef EXIT_SUCCESS
#ifdef VMS
#define EXIT_SUCCESS 1 /* VMS is very nonstandard */
#else
#define EXIT_SUCCESS 0
#endif
#endif
#ifndef EXIT_WARNING
#ifdef VMS
#define EXIT_WARNING 1 /* VMS is very nonstandard */
#else
#define EXIT_WARNING 2
#endif
#endif

23
change.log
View File

@@ -1,9 +1,28 @@
NOTE: This file was modified by The libjpeg-turbo Project to include only
information relevant to libjpeg-turbo.
libjpeg-turbo note: This file has been modified by The libjpeg-turbo Project
to include only information relevant to libjpeg-turbo. It is included only for
reference. Please see ChangeLog.md for information specific to libjpeg-turbo.
CHANGE LOG for Independent JPEG Group's JPEG software
Version 9b 17-Jan-2016
-----------------------
Document 'f' specifier for jpegtran -crop specification.
Thank to Michele Martone for suggestion.
Version 9 13-Jan-2013
----------------------
Add remark for jpeg_mem_dest() in jdatadst.c.
Thank to Elie-Gregoire Khoury for the hint.
Correct argument type in format string, avoid compiler warnings.
Thank to Vincent Torri for hint.
Version 8d 15-Jan-2012
-----------------------

47
cjpeg.1
View File

@@ -1,4 +1,4 @@
.TH CJPEG 1 "18 January 2013"
.TH CJPEG 1 "17 February 2016"
.SH NAME
cjpeg \- compress an image file to a JPEG file
.SH SYNOPSIS
@@ -16,7 +16,7 @@ cjpeg \- compress an image file to a JPEG file
compresses the named image file, or the standard input if no file is
named, and produces a JPEG/JFIF file on the standard output.
The currently supported input file formats are: PPM (PBMPLUS color
format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
format), PGM (PBMPLUS grayscale format), BMP, Targa, and RLE (Utah Raster
Toolkit format). (RLE is supported only if the URT library is available.)
.SH OPTIONS
All switch names may be abbreviated; for example,
@@ -85,8 +85,8 @@ reconstructed image: the higher the quality setting, the larger the JPEG file,
and the closer the output image will be to the original input. Normally you
want to use the lowest quality setting (smallest file) that decompresses into
something visually indistinguishable from the original image. For this
purpose the quality setting should be between 50 and 95; the default of 75 is
often about right. If you see defects at
purpose the quality setting should generally be between 50 and 95 (the default
is 75) for photographic images. If you see defects at
.B \-quality
75, then go up 5 or 10 counts at a time until you are happy with the output
image. (The optimal setting will vary from one image to another.)
@@ -94,11 +94,10 @@ image. (The optimal setting will vary from one image to another.)
.B \-quality
100 will generate a quantization table of all 1's, minimizing loss in the
quantization step (but there is still information loss in subsampling, as well
as roundoff error). This setting is mainly of interest for experimental
purposes. Quality values above about 95 are
.B not
recommended for normal use; the compressed file size goes up dramatically for
hardly any gain in output image quality.
as roundoff error.) For most images, specifying a quality value above
about 95 will increase the size of the compressed file dramatically, and while
the quality gain from these higher quality values is measurable (using metrics
such as PSNR or SSIM), it is rarely perceivable by human vision.
.PP
In the other direction, quality values below 50 will produce very small files
of low image quality. Settings around 5 to 10 might be useful in preparing an
@@ -166,14 +165,27 @@ Use integer DCT method (default).
.TP
.B \-dct fast
Use fast integer DCT (less accurate).
In libjpeg-turbo, the fast method is generally about 5-15% faster than the int
method when using the x86/x86-64 SIMD extensions (results may vary with other
SIMD implementations, or when using libjpeg-turbo without SIMD extensions.)
For quality levels of 90 and below, there should be little or no perceptible
difference between the two algorithms. For quality levels above 90, however,
the difference between the fast and the int methods becomes more pronounced.
With quality=97, for instance, the fast method incurs generally about a 1-3 dB
loss (in PSNR) relative to the int method, but this can be larger for some
images. Do not use the fast method with quality levels above 97. The
algorithm often degenerates at quality=98 and above and can actually produce a
more lossy image than if lower quality levels had been used. Also, in
libjpeg-turbo, the fast method is not fully accelerated for quality levels
above 97, so it will be slower than the int method.
.TP
.B \-dct float
Use floating-point DCT method.
The float method is very slightly more accurate than the int method, but is
much slower unless your machine has very fast floating-point hardware. Also
note that results of the floating-point method may vary slightly across
machines, while the integer methods should give the same results everywhere.
The fast integer method is much less accurate than the other two.
The float method is mainly a legacy feature. It does not produce significantly
more accurate results than the int method, and it is much slower. The float
method may also give different results on different machines due to varying
roundoff behavior, whereas the integer methods should give the same results on
all machines.
.TP
.BI \-restart " N"
Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
@@ -208,6 +220,9 @@ give more output. Also, version information is printed at startup.
.B \-debug
Same as
.BR \-verbose .
.TP
.B \-version
Print version information and exit.
.PP
The
.B \-restart
@@ -322,11 +337,11 @@ Independent JPEG Group
This file was modified by The libjpeg-turbo Project to include only information
relevant to libjpeg-turbo, to wordsmith certain sections, and to describe
features not present in libjpeg.
.SH BUGS
.SH ISSUES
Support for GIF input files was removed in cjpeg v6b due to concerns over
the Unisys LZW patent. Although this patent expired in 2006, cjpeg still
lacks GIF support, for these historical reasons. (Conversion of GIF files to
JPEG is usually a bad idea anyway.)
JPEG is usually a bad idea anyway, since GIF is a 256-color format.)
.PP
Not all variants of BMP and Targa file formats are supported.
.PP

207
cjpeg.c
View File

@@ -4,17 +4,18 @@
* This file was part of the Independent JPEG Group's software:
* Copyright (C) 1991-1998, Thomas G. Lane.
* Modified 2003-2011 by Guido Vollbeding.
* Modifications:
* Copyright (C) 2010, 2013, D. R. Commander.
* For conditions of distribution and use, see the accompanying README file.
* libjpeg-turbo Modifications:
* Copyright (C) 2010, 2013-2014, D. R. Commander.
* For conditions of distribution and use, see the accompanying README.ijg
* file.
*
* This file contains a command-line user interface for the JPEG compressor.
* It should work on any system with Unix- or MS-DOS-style command lines.
*
* Two different command line styles are permitted, depending on the
* compile-time switch TWO_FILE_COMMANDLINE:
* cjpeg [options] inputfile outputfile
* cjpeg [options] [inputfile]
* cjpeg [options] inputfile outputfile
* cjpeg [options] [inputfile]
* In the second style, output is always to standard output, which you'd
* normally redirect to a file or pipe to some other program. Input is
* either from a named file or from standard input (typically redirected).
@@ -22,28 +23,28 @@
* don't support pipes. Also, you MUST use the first style if your system
* doesn't do binary I/O to stdin/stdout.
* To simplify script writing, the "-outfile" switch is provided. The syntax
* cjpeg [options] -outfile outputfile inputfile
* cjpeg [options] -outfile outputfile inputfile
* works regardless of which command line style is used.
*/
#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
#include "jversion.h" /* for version message */
#include "config.h"
#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
#include "jversion.h" /* for version message */
#include "jconfigint.h"
#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
#ifdef __MWERKS__
#include <SIOUX.h> /* Metrowerks needs this */
#include <console.h> /* ... and this */
#include <console.h> /* ... and this */
#endif
#ifdef THINK_C
#include <console.h> /* Think declares it here */
#include <console.h> /* Think declares it here */
#endif
#endif
/* Create the add-on message string table. */
#define JMESSAGE(code,string) string ,
#define JMESSAGE(code,string) string ,
static const char * const cdjpeg_message_table[] = {
#include "cderror.h"
@@ -77,11 +78,11 @@ static const char * const cdjpeg_message_table[] = {
* seldom-used ID field), so we provide a switch to force Targa input mode.
*/
static boolean is_targa; /* records user -targa switch */
static boolean is_targa; /* records user -targa switch */
LOCAL(cjpeg_source_ptr)
select_file_type (j_compress_ptr cinfo, FILE * infile)
select_file_type (j_compress_ptr cinfo, FILE *infile)
{
int c;
@@ -124,7 +125,7 @@ select_file_type (j_compress_ptr cinfo, FILE * infile)
break;
}
return NULL; /* suppress compiler warnings */
return NULL; /* suppress compiler warnings */
}
@@ -137,9 +138,9 @@ select_file_type (j_compress_ptr cinfo, FILE * infile)
*/
static const char * progname; /* program name for error messages */
static char * outfilename; /* for -outfile switch */
boolean memdst; /* for -memdst switch */
static const char *progname; /* program name for error messages */
static char *outfilename; /* for -outfile switch */
boolean memdst; /* for -memdst switch */
LOCAL(void)
@@ -154,7 +155,8 @@ usage (void)
#endif
fprintf(stderr, "Switches (names may be abbreviated):\n");
fprintf(stderr, " -quality N[,...] Compression quality (0..100; 5-95 is useful range)\n");
fprintf(stderr, " -quality N[,...] Compression quality (0..100; 5-95 is most useful range,\n");
fprintf(stderr, " default is 75)\n");
fprintf(stderr, " -grayscale Create monochrome JPEG file\n");
fprintf(stderr, " -rgb Create RGB JPEG file\n");
#ifdef ENTROPY_OPT_SUPPORTED
@@ -172,15 +174,15 @@ usage (void)
#endif
#ifdef DCT_ISLOW_SUPPORTED
fprintf(stderr, " -dct int Use integer DCT method%s\n",
(JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
(JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
#endif
#ifdef DCT_IFAST_SUPPORTED
fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n",
(JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
(JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
#endif
#ifdef DCT_FLOAT_SUPPORTED
fprintf(stderr, " -dct float Use floating-point DCT method%s\n",
(JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
(JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
#endif
fprintf(stderr, " -restart N Set restart interval in rows, or in blocks with B\n");
#ifdef INPUT_SMOOTHING_SUPPORTED
@@ -192,6 +194,7 @@ usage (void)
fprintf(stderr, " -memdst Compress to memory instead of file (useful for benchmarking)\n");
#endif
fprintf(stderr, " -verbose or -debug Emit debug output\n");
fprintf(stderr, " -version Print version information and exit\n");
fprintf(stderr, "Switches for wizards:\n");
fprintf(stderr, " -baseline Force baseline quantization tables\n");
fprintf(stderr, " -qtables file Use quantization tables given in file\n");
@@ -206,7 +209,7 @@ usage (void)
LOCAL(int)
parse_switches (j_compress_ptr cinfo, int argc, char **argv,
int last_file_arg_seen, boolean for_real)
int last_file_arg_seen, boolean for_real)
/* Parse optional switches.
* Returns argv[] index of first file-name argument (== argc if none).
* Any file names with indexes <= last_file_arg_seen are ignored;
@@ -217,18 +220,18 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
*/
{
int argn;
char * arg;
char *arg;
boolean force_baseline;
boolean simple_progressive;
char * qualityarg = NULL; /* saves -quality parm if any */
char * qtablefile = NULL; /* saves -qtables filename if any */
char * qslotsarg = NULL; /* saves -qslots parm if any */
char * samplearg = NULL; /* saves -sample parm if any */
char * scansarg = NULL; /* saves -scans parm if any */
char *qualityarg = NULL; /* saves -quality parm if any */
char *qtablefile = NULL; /* saves -qtables filename if any */
char *qslotsarg = NULL; /* saves -qslots parm if any */
char *samplearg = NULL; /* saves -sample parm if any */
char *scansarg = NULL; /* saves -scans parm if any */
/* Set up default JPEG parameters. */
force_baseline = FALSE; /* by default, allow 16-bit quantizers */
force_baseline = FALSE; /* by default, allow 16-bit quantizers */
simple_progressive = FALSE;
is_targa = FALSE;
outfilename = NULL;
@@ -242,12 +245,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
if (*arg != '-') {
/* Not a switch, must be a file name argument */
if (argn <= last_file_arg_seen) {
outfilename = NULL; /* -outfile applies to just one input file */
continue; /* ignore this name if previously processed */
outfilename = NULL; /* -outfile applies to just one input file */
continue; /* ignore this name if previously processed */
}
break; /* else done parsing switches */
break; /* else done parsing switches */
}
arg++; /* advance past switch marker character */
arg++; /* advance past switch marker character */
if (keymatch(arg, "arithmetic", 1)) {
/* Use arithmetic coding. */
@@ -255,7 +258,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
cinfo->arith_code = TRUE;
#else
fprintf(stderr, "%s: sorry, arithmetic coding not supported\n",
progname);
progname);
exit(EXIT_FAILURE);
#endif
@@ -265,16 +268,16 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
} else if (keymatch(arg, "dct", 2)) {
/* Select DCT algorithm. */
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (keymatch(argv[argn], "int", 1)) {
cinfo->dct_method = JDCT_ISLOW;
cinfo->dct_method = JDCT_ISLOW;
} else if (keymatch(argv[argn], "fast", 2)) {
cinfo->dct_method = JDCT_IFAST;
cinfo->dct_method = JDCT_IFAST;
} else if (keymatch(argv[argn], "float", 2)) {
cinfo->dct_method = JDCT_FLOAT;
cinfo->dct_method = JDCT_FLOAT;
} else
usage();
usage();
} else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
/* Enable debug printouts. */
@@ -282,15 +285,20 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
static boolean printed_version = FALSE;
if (! printed_version) {
fprintf(stderr, "%s version %s (build %s)\n",
PACKAGE_NAME, VERSION, BUILD);
fprintf(stderr, "%s\n\n", JCOPYRIGHT);
fprintf(stderr, "Emulating The Independent JPEG Group's libjpeg, version %s\n\n",
JVERSION);
printed_version = TRUE;
fprintf(stderr, "%s version %s (build %s)\n",
PACKAGE_NAME, VERSION, BUILD);
fprintf(stderr, "%s\n\n", JCOPYRIGHT);
fprintf(stderr, "Emulating The Independent JPEG Group's software, version %s\n\n",
JVERSION);
printed_version = TRUE;
}
cinfo->err->trace_level++;
} else if (keymatch(arg, "version", 4)) {
fprintf(stderr, "%s version %s (build %s)\n",
PACKAGE_NAME, VERSION, BUILD);
exit(EXIT_SUCCESS);
} else if (keymatch(arg, "grayscale", 2) || keymatch(arg, "greyscale",2)) {
/* Force a monochrome JPEG file to be generated. */
jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
@@ -304,12 +312,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
long lval;
char ch = 'x';
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
usage();
usage();
if (ch == 'm' || ch == 'M')
lval *= 1000L;
lval *= 1000L;
cinfo->mem->max_memory_to_use = lval * 1000L;
} else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
@@ -318,15 +326,15 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
cinfo->optimize_coding = TRUE;
#else
fprintf(stderr, "%s: sorry, entropy optimization was not compiled in\n",
progname);
progname);
exit(EXIT_FAILURE);
#endif
} else if (keymatch(arg, "outfile", 4)) {
/* Set output file name. */
if (++argn >= argc) /* advance to next argument */
usage();
outfilename = argv[argn]; /* save it away for later use */
if (++argn >= argc) /* advance to next argument */
usage();
outfilename = argv[argn]; /* save it away for later use */
} else if (keymatch(arg, "progressive", 1)) {
/* Select simple progressive mode. */
@@ -335,7 +343,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
/* We must postpone execution until num_components is known. */
#else
fprintf(stderr, "%s: sorry, progressive output was not compiled in\n",
progname);
progname);
exit(EXIT_FAILURE);
#endif
@@ -351,14 +359,14 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
} else if (keymatch(arg, "quality", 1)) {
/* Quality ratings (quantization table scaling factors). */
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
qualityarg = argv[argn];
} else if (keymatch(arg, "qslots", 2)) {
/* Quantization table slot numbers. */
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
qslotsarg = argv[argn];
/* Must delay setting qslots until after we have processed any
* colorspace-determining switches, since jpeg_set_colorspace sets
@@ -367,8 +375,8 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
} else if (keymatch(arg, "qtables", 2)) {
/* Quantization tables fetched from file. */
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
qtablefile = argv[argn];
/* We postpone actually reading the file in case -quality comes later. */
@@ -377,24 +385,24 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
long lval;
char ch = 'x';
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
usage();
usage();
if (lval < 0 || lval > 65535L)
usage();
usage();
if (ch == 'b' || ch == 'B') {
cinfo->restart_interval = (unsigned int) lval;
cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
cinfo->restart_interval = (unsigned int) lval;
cinfo->restart_in_rows = 0; /* else prior '-restart n' overrides me */
} else {
cinfo->restart_in_rows = (int) lval;
/* restart_interval will be computed during startup */
cinfo->restart_in_rows = (int) lval;
/* restart_interval will be computed during startup */
}
} else if (keymatch(arg, "sample", 2)) {
/* Set sampling factors. */
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
samplearg = argv[argn];
/* Must delay setting sample factors until after we have processed any
* colorspace-determining switches, since jpeg_set_colorspace sets
@@ -404,13 +412,13 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
} else if (keymatch(arg, "scans", 4)) {
/* Set scan script. */
#ifdef C_MULTISCAN_FILES_SUPPORTED
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
scansarg = argv[argn];
/* We must postpone reading the file in case -progressive appears. */
#else
fprintf(stderr, "%s: sorry, multi-scan output was not compiled in\n",
progname);
progname);
exit(EXIT_FAILURE);
#endif
@@ -418,12 +426,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
/* Set input smoothing factor. */
int val;
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%d", &val) != 1)
usage();
usage();
if (val < 0 || val > 100)
usage();
usage();
cinfo->smoothing_factor = val;
} else if (keymatch(arg, "targa", 1)) {
@@ -431,7 +439,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
is_targa = TRUE;
} else {
usage(); /* bogus switch */
usage(); /* bogus switch */
}
}
@@ -441,35 +449,35 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
/* Set quantization tables for selected quality. */
/* Some or all may be overridden if -qtables is present. */
if (qualityarg != NULL) /* process -quality if it was present */
if (qualityarg != NULL) /* process -quality if it was present */
if (! set_quality_ratings(cinfo, qualityarg, force_baseline))
usage();
usage();
if (qtablefile != NULL) /* process -qtables if it was present */
if (qtablefile != NULL) /* process -qtables if it was present */
if (! read_quant_tables(cinfo, qtablefile, force_baseline))
usage();
usage();
if (qslotsarg != NULL) /* process -qslots if it was present */
if (qslotsarg != NULL) /* process -qslots if it was present */
if (! set_quant_slots(cinfo, qslotsarg))
usage();
usage();
if (samplearg != NULL) /* process -sample if it was present */
if (samplearg != NULL) /* process -sample if it was present */
if (! set_sample_factors(cinfo, samplearg))
usage();
usage();
#ifdef C_PROGRESSIVE_SUPPORTED
if (simple_progressive) /* process -progressive; -scans can override */
if (simple_progressive) /* process -progressive; -scans can override */
jpeg_simple_progression(cinfo);
#endif
#ifdef C_MULTISCAN_FILES_SUPPORTED
if (scansarg != NULL) /* process -scans if it was present */
if (scansarg != NULL) /* process -scans if it was present */
if (! read_scan_script(cinfo, scansarg))
usage();
usage();
#endif
}
return argn; /* return index of next arg (file name) */
return argn; /* return index of next arg (file name) */
}
@@ -487,8 +495,8 @@ main (int argc, char **argv)
#endif
int file_index;
cjpeg_source_ptr src_mgr;
FILE * input_file;
FILE * output_file = NULL;
FILE *input_file;
FILE *output_file = NULL;
unsigned char *outbuffer = NULL;
unsigned long outsize = 0;
JDIMENSION num_scanlines;
@@ -500,7 +508,7 @@ main (int argc, char **argv)
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "cjpeg"; /* in case C library doesn't provide it */
progname = "cjpeg"; /* in case C library doesn't provide it */
/* Initialize the JPEG compression object with default error handling. */
cinfo.err = jpeg_std_error(&jerr);
@@ -510,11 +518,6 @@ main (int argc, char **argv)
jerr.first_addon_message = JMSG_FIRSTADDONCODE;
jerr.last_addon_message = JMSG_LASTADDONCODE;
/* Now safe to enable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &cinfo);
#endif
/* Initialize JPEG parameters.
* Much of this may be overridden later.
* In particular, we don't yet know the input file's color space,
@@ -637,5 +640,5 @@ main (int argc, char **argv)
/* All done. */
exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
return 0; /* suppress no-return-value warnings */
}

15
cmakescripts/md5cmp.cmake
View File

@@ -1,15 +0,0 @@
if(NOT MD5)
message(FATAL_ERROR "MD5 not specified")
endif()
if(NOT FILE)
message(FATAL_ERROR "FILE not specified")
endif()
file(MD5 ${FILE} MD5FILE)
if(NOT MD5 STREQUAL MD5FILE)
message(FATAL_ERROR "MD5 of ${FILE} should be ${MD5}, not ${MD5FILE}.")
else()
message(STATUS "${MD5}: OK")
endif()

72
coderules.txt
View File

@@ -1,8 +1,10 @@
IJG JPEG LIBRARY: CODING RULES
This file was part of the Independent JPEG Group's software:
Copyright (C) 1991-1996, Thomas G. Lane.
This file is part of the Independent JPEG Group's software.
For conditions of distribution and use, see the accompanying README file.
It was modified by The libjpeg-turbo Project to include only information
relevant to libjpeg-turbo.
For conditions of distribution and use, see the accompanying README.ijg file.
Since numerous people will be contributing code and bug fixes, it's important
@@ -21,33 +23,18 @@ Block comments should be laid out thusly:
*/
We indent statements in K&R style, e.g.,
if (test) {
then-part;
} else {
else-part;
}
if (test) {
then-part;
} else {
else-part;
}
with two spaces per indentation level. (This indentation convention is
handled automatically by GNU Emacs and many other text editors.)
Multi-word names should be written in lower case with underscores, e.g.,
multi_word_name (not multiWordName). Preprocessor symbols and enum constants
are similar but upper case (MULTI_WORD_NAME). Names should be unique within
the first fifteen characters. (On some older systems, global names must be
unique within six characters. We accommodate this without cluttering the
source code by using macros to substitute shorter names.)
We use function prototypes everywhere; we rely on automatic source code
transformation to feed prototype-less C compilers. Transformation is done
by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript).
ansi2knr is not very bright, so it imposes a format requirement on function
declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions
should be written in the following style:
LOCAL(int *)
function_name (int a, char *b)
{
code...
}
the first fifteen characters.
Note that each function definition must begin with GLOBAL(type), LOCAL(type),
or METHODDEF(type). These macros expand to "static type" or just "type" as
@@ -55,32 +42,8 @@ appropriate. They provide a readable indication of the routine's usage and
can readily be changed for special needs. (For instance, special linkage
keywords can be inserted for use in Windows DLLs.)
ansi2knr does not transform method declarations (function pointers in
structs). We handle these with a macro JMETHOD, defined as
#ifdef HAVE_PROTOTYPES
#define JMETHOD(type,methodname,arglist) type (*methodname) arglist
#else
#define JMETHOD(type,methodname,arglist) type (*methodname) ()
#endif
which is used like this:
struct function_pointers {
JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp));
JMETHOD(void, term_entropy_encoder, (void));
};
Note the set of parentheses surrounding the parameter list.
A similar solution is used for forward and external function declarations
(see the EXTERN and JPP macros).
If the code is to work on non-ANSI compilers, we cannot rely on a prototype
declaration to coerce actual parameters into the right types. Therefore, use
explicit casts on actual parameters whenever the actual parameter type is not
identical to the formal parameter. Beware of implicit conversions to "int".
It seems there are some non-ANSI compilers in which the sizeof() operator
is defined to return int, yet size_t is defined as long. Needless to say,
this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(),
so that the result is guaranteed to be of type size_t.
A similar solution is used for external function declarations (see the EXTERN
macro.)
The JPEG library is intended to be used within larger programs. Furthermore,
@@ -94,9 +57,7 @@ pass these through the common routines provided.
wherever possible. (Note that our method-based calling conventions help this
a lot: in many modules only the initialization function will ever need to be
called directly, so only that function need be externally visible.) All
global function names should begin with "jpeg_", and should have an
abbreviated name (unique in the first six characters) substituted by macro
when NEED_SHORT_EXTERNAL_NAMES is set.
global function names should begin with "jpeg_".
3. Don't use global variables; anything that must be used in another module
should be in the common data structures.
@@ -107,10 +68,9 @@ the system architecture document, structure.txt).
5. Source file names should begin with "j" for files that are part of the
library proper; source files that are not part of the library, such as cjpeg.c
and djpeg.c, do not begin with "j". Keep source file names to eight
characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep
compression and decompression code in separate source files --- some
applications may want only one half of the library.
and djpeg.c, do not begin with "j". Keep compression and decompression code in
separate source files --- some applications may want only one half of the
library.
Note: these rules (particularly #4) are not followed religiously in the
modules that are used in cjpeg/djpeg but are not part of the JPEG library

485
configure.ac
View File

@@ -2,31 +2,88 @@
# Process this file with autoconf to produce a configure script.
AC_PREREQ([2.56])
AC_INIT([libjpeg-turbo], [1.2.90])
BUILD=`date +%Y%m%d`
AC_INIT([libjpeg-turbo], [1.5.1])
AM_INIT_AUTOMAKE([-Wall foreign dist-bzip2])
AC_PREFIX_DEFAULT(/opt/libjpeg-turbo)
# Always build with prototypes
AC_DEFINE([HAVE_PROTOTYPES], 1, [Define if your compiler supports prototypes])
m4_ifdef([AM_SILENT_RULES], [AM_SILENT_RULES([yes])])
# Checks for programs.
SAVED_CFLAGS=${CFLAGS}
SAVED_CPPFLAGS=${CPPFLAGS}
AC_PROG_CPP
AC_PROG_CC
m4_ifdef([AM_PROG_AR], [AM_PROG_AR])
AM_PROG_AS
AM_PROG_CC_C_O
AC_PROG_INSTALL
AC_PROG_LIBTOOL
AC_PROG_LN_S
AC_ARG_WITH([build-date], [Use custom build string to enable reproducible builds (default: YYMMDD)],
[BUILD="$with_build_date"],
[BUILD=`date +%Y%m%d`])
PKG_PROG_PKG_CONFIG
# When the prefix is /opt/libjpeg-turbo, we assume that an "official" binary is
# being created, and thus we install things into specific locations.
old_prefix=${prefix}
if test "x$prefix" = "xNONE" -a "x$ac_default_prefix" != "x"; then
prefix=$ac_default_prefix
fi
DATADIR=`eval echo ${datadir}`
DATADIR=`eval echo $DATADIR`
if test "$DATADIR" = "/opt/libjpeg-turbo/share"; then
datadir='${prefix}'
fi
DATADIR=`eval echo ${datarootdir}`
DATADIR=`eval echo $DATADIR`
if test "$DATADIR" = "/opt/libjpeg-turbo/share"; then
datarootdir='${prefix}'
fi
DOCDIR=`eval echo ${docdir}`
DOCDIR=`eval echo $DOCDIR`
if test "$DOCDIR" = "/opt/libjpeg-turbo/doc/libjpeg-turbo"; then
docdir='${datadir}/doc'
fi
old_exec_prefix=${exec_prefix}
if test "x$exec_prefix" = "xNONE"; then
exec_prefix=${prefix}
fi
AC_CHECK_SIZEOF(size_t)
if test "x${libdir}" = 'x${exec_prefix}/lib' -o "x${libdir}" = 'x${prefix}/lib'; then
LIBDIR=`eval echo ${libdir}`
LIBDIR=`eval echo $LIBDIR`
if test "$LIBDIR" = "/opt/libjpeg-turbo/lib"; then
case $host_os in
darwin*)
;;
*)
if test "${ac_cv_sizeof_size_t}" = "8"; then
libdir='${exec_prefix}/lib64'
elif test "${ac_cv_sizeof_size_t}" = "4"; then
libdir='${exec_prefix}/lib32'
fi
;;
esac
fi
fi
exec_prefix=${old_exec_prefix}
prefix=${old_prefix}
# Check whether compiler supports pointers to undefined structures
AC_MSG_CHECKING(whether compiler supports pointers to undefined structures)
AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], ,
AC_MSG_RESULT(yes),
[AC_MSG_RESULT(no)
AC_DEFINE([INCOMPLETE_TYPES_BROKEN],[1],[Compiler does not support pointers to undefined structures.])])
AC_TRY_COMPILE([ typedef struct undefined_structure *undef_struct_ptr; ], ,
AC_MSG_RESULT(yes),
[AC_MSG_RESULT(no)
AC_DEFINE([INCOMPLETE_TYPES_BROKEN], [1],
[Compiler does not support pointers to undefined structures.])])
if test "x${GCC}" = "xyes"; then
if test "x${SAVED_CFLAGS}" = "x"; then
@@ -48,8 +105,9 @@ fi
# Checks for header files.
AC_HEADER_STDC
AC_CHECK_HEADERS([stddef.h stdlib.h string.h])
AC_CHECK_HEADER([sys/types.h], AC_DEFINE([NEED_SYS_TYPES_H], 1, [Define if you have sys/types.h]))
AC_CHECK_HEADERS([stddef.h stdlib.h locale.h string.h])
AC_CHECK_HEADER([sys/types.h],
AC_DEFINE([NEED_SYS_TYPES_H], 1, [Define if you need to include <sys/types.h> to get size_t.]))
# Checks for typedefs, structures, and compiler characteristics.
AC_C_CONST
@@ -60,99 +118,98 @@ AC_CHECK_TYPES([unsigned char, unsigned short])
AC_MSG_CHECKING([if right shift is signed])
AC_TRY_RUN(
[#include <stdio.h>
int is_shifting_signed (long arg) {
long res = arg >> 4;
[#include <stdio.h>
int is_shifting_signed (long arg) {
long res = arg >> 4;
if (res == -0x7F7E80CL)
return 1; /* right shift is signed */
if (res == -0x7F7E80CL)
return 1; /* right shift is signed */
/* see if unsigned-shift hack will fix it. */
/* we can't just test exact value since it depends on width of long... */
res |= (~0L) << (32-4);
if (res == -0x7F7E80CL)
return 0; /* right shift is unsigned */
/* see if unsigned-shift hack will fix it. */
/* we can't just test exact value since it depends on width of long... */
res |= (~0L) << (32-4);
if (res == -0x7F7E80CL)
return 0; /* right shift is unsigned */
printf("Right shift isn't acting as I expect it to.\n");
printf("I fear the JPEG software will not work at all.\n\n");
return 0; /* try it with unsigned anyway */
}
int main (void) {
exit(is_shifting_signed(-0x7F7E80B1L));
}],
[AC_MSG_RESULT(no)
AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], 1, [Define if shift is unsigned])],
[AC_MSG_RESULT(yes)],
[AC_MSG_RESULT(Assuming that right shift is signed on target machine.)])
# test whether global names are unique to at least 15 chars
AC_MSG_CHECKING([for short external names])
AC_TRY_LINK(
[int possibly_duplicate_function () { return 0; }
int possibly_dupli_function () { return 1; }], [ ],
[AC_MSG_RESULT(ok)],
[AC_MSG_RESULT(short)
AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], 1, [Define if you need short function names])])
printf("Right shift isn't acting as I expect it to.\n");
printf("I fear the JPEG software will not work at all.\n\n");
return 0; /* try it with unsigned anyway */
}
int main (void) {
exit(is_shifting_signed(-0x7F7E80B1L));
}],
[AC_MSG_RESULT(no)
AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], 1,
[Define if your (broken) compiler shifts signed values as if they were unsigned.])],
[AC_MSG_RESULT(yes)],
[AC_MSG_RESULT(Assuming that right shift is signed on target machine.)])
# Checks for library functions.
AC_CHECK_FUNCS([memset memcpy], [],
[AC_DEFINE([NEED_BSD_STRINGS], 1,
[Define if you have BSD-like bzero and bcopy])])
[AC_DEFINE([NEED_BSD_STRINGS], 1,
[Define if you have BSD-like bzero and bcopy in <strings.h> rather than memset/memcpy in <string.h>.])])
AC_MSG_CHECKING([libjpeg API version])
AC_ARG_VAR(JPEG_LIB_VERSION, [libjpeg API version (62, 70, or 80)])
if test "x$JPEG_LIB_VERSION" = "x"; then
AC_ARG_WITH([jpeg7],
AC_HELP_STRING([--with-jpeg7], [Emulate libjpeg v7 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b.)]))
AC_ARG_WITH([jpeg8],
AC_HELP_STRING([--with-jpeg8], [Emulate libjpeg v8 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b.)]))
if test "x${with_jpeg8}" = "xyes"; then
JPEG_LIB_VERSION=80
AC_ARG_WITH([jpeg7],
AC_HELP_STRING([--with-jpeg7],
[Emulate libjpeg v7 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b.)]))
AC_ARG_WITH([jpeg8],
AC_HELP_STRING([--with-jpeg8],
[Emulate libjpeg v8 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b.)]))
if test "x${with_jpeg8}" = "xyes"; then
JPEG_LIB_VERSION=80
else
if test "x${with_jpeg7}" = "xyes"; then
JPEG_LIB_VERSION=70
else
if test "x${with_jpeg7}" = "xyes"; then
JPEG_LIB_VERSION=70
else
JPEG_LIB_VERSION=62
fi
JPEG_LIB_VERSION=62
fi
fi
fi
JPEG_LIB_VERSION_DECIMAL=`expr $JPEG_LIB_VERSION / 10`.`expr $JPEG_LIB_VERSION % 10`
AC_SUBST(JPEG_LIB_VERSION_DECIMAL)
AC_MSG_RESULT([$JPEG_LIB_VERSION_DECIMAL])
AC_DEFINE_UNQUOTED(JPEG_LIB_VERSION, [$JPEG_LIB_VERSION], [libjpeg API version])
AC_DEFINE_UNQUOTED(JPEG_LIB_VERSION, [$JPEG_LIB_VERSION],
[libjpeg API version])
AC_ARG_VAR(SO_MAJOR_VERSION, [Major version of the libjpeg-turbo shared library (default is determined by the API version)])
AC_ARG_VAR(SO_MINOR_VERSION, [Minor version of the libjpeg-turbo shared library (default is determined by the API version)])
AC_ARG_VAR(SO_MAJOR_VERSION,
[Major version of the libjpeg-turbo shared library (default is determined by the API version)])
AC_ARG_VAR(SO_MINOR_VERSION,
[Minor version of the libjpeg-turbo shared library (default is determined by the API version)])
if test "x$SO_MAJOR_VERSION" = "x"; then
case "$JPEG_LIB_VERSION" in
62) SO_MAJOR_VERSION=$JPEG_LIB_VERSION ;;
*) SO_MAJOR_VERSION=`expr $JPEG_LIB_VERSION / 10` ;;
esac
case "$JPEG_LIB_VERSION" in
62) SO_MAJOR_VERSION=$JPEG_LIB_VERSION ;;
*) SO_MAJOR_VERSION=`expr $JPEG_LIB_VERSION / 10` ;;
esac
fi
if test "x$SO_MINOR_VERSION" = "x"; then
case "$JPEG_LIB_VERSION" in
80) SO_MINOR_VERSION=2 ;;
*) SO_MINOR_VERSION=0 ;;
esac
case "$JPEG_LIB_VERSION" in
80) SO_MINOR_VERSION=2 ;;
*) SO_MINOR_VERSION=0 ;;
esac
fi
RPM_CONFIG_ARGS=
# Memory source/destination managers
SO_AGE=0
SO_AGE=1
MEM_SRCDST_FUNCTIONS=
if test "x${with_jpeg8}" != "xyes"; then
AC_MSG_CHECKING([whether to include in-memory source/destination managers])
AC_ARG_WITH([mem-srcdst],
AC_HELP_STRING([--without-mem-srcdst], [Do not include in-memory source/destination manager functions when emulating the libjpeg v6b or v7 API/ABI]))
AC_HELP_STRING([--without-mem-srcdst],
[Do not include in-memory source/destination manager functions when emulating the libjpeg v6b or v7 API/ABI]))
if test "x$with_mem_srcdst" != "xno"; then
AC_MSG_RESULT(yes)
AC_DEFINE([MEM_SRCDST_SUPPORTED], [1], [Support in-memory source/destination managers])
SO_AGE=1
MEM_SRCDST_FUNCTIONS="global: jpeg_mem_dest; jpeg_mem_src;";
AC_MSG_RESULT(yes)
AC_DEFINE([MEM_SRCDST_SUPPORTED], [1],
[Support in-memory source/destination managers])
SO_AGE=2
MEM_SRCDST_FUNCTIONS="global: jpeg_mem_dest; jpeg_mem_src;";
else
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-mem-srcdst"
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-mem-srcdst"
fi
fi
@@ -167,11 +224,21 @@ AC_SUBST(MEM_SRCDST_FUNCTIONS)
AC_DEFINE_UNQUOTED(LIBJPEG_TURBO_VERSION, [$VERSION], [libjpeg-turbo version])
m4_define(version_triplet,m4_split(AC_PACKAGE_VERSION,[[.]]))
m4_define(version_major,m4_argn(1,version_triplet))
m4_define(version_minor,m4_argn(2,version_triplet))
m4_define(version_revision,m4_argn(3,version_triplet))
VERSION_MAJOR=version_major
VERSION_MINOR=version_minor
VERSION_REVISION=version_revision
LIBJPEG_TURBO_VERSION_NUMBER=`printf "%d%03d%03d" $VERSION_MAJOR $VERSION_MINOR $VERSION_REVISION`
AC_DEFINE_UNQUOTED(LIBJPEG_TURBO_VERSION_NUMBER, [$LIBJPEG_TURBO_VERSION_NUMBER], [libjpeg-turbo version in integer form])
VERSION_SCRIPT=yes
AC_ARG_ENABLE([ld-version-script],
AS_HELP_STRING([--disable-ld-version-script],
[Disable linker version script for libjpeg-turbo (default is to use linker version script if the linker supports it)]),
[VERSION_SCRIPT=$enableval], [])
[VERSION_SCRIPT=$enableval], [])
AC_MSG_CHECKING([whether the linker supports version scripts])
SAVED_LDFLAGS="$LDFLAGS"
@@ -181,12 +248,16 @@ VERS_1 {
global: *;
};
EOF
AC_LINK_IFELSE(AC_LANG_PROGRAM([], []),
[VERSION_SCRIPT_FLAG=-Wl,--version-script,; AC_MSG_RESULT([yes (GNU style)])], [])
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
[VERSION_SCRIPT_FLAG=-Wl,--version-script,;
AC_MSG_RESULT([yes (GNU style)])],
[])
if test "x$VERSION_SCRIPT_FLAG" = "x"; then
LDFLAGS="$SAVED_LDFLAGS -Wl,-M,conftest.map"
AC_LINK_IFELSE(AC_LANG_PROGRAM([], []),
[VERSION_SCRIPT_FLAG=-Wl,-M,; AC_MSG_RESULT([yes (Sun style)])], [])
AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
[VERSION_SCRIPT_FLAG=-Wl,-M,;
AC_MSG_RESULT([yes (Sun style)])],
[])
fi
if test "x$VERSION_SCRIPT_FLAG" = "x"; then
VERSION_SCRIPT=no
@@ -203,8 +274,8 @@ AC_SUBST(VERSION_SCRIPT_FLAG)
# Check for non-broken inline under various spellings
AC_MSG_CHECKING(for inline)
ljt_cv_inline=""
AC_TRY_COMPILE(, [} __attribute__((always_inline)) int foo() { return 0; }
int bar() { return foo();], ljt_cv_inline="__attribute__((always_inline))",
AC_TRY_COMPILE(, [} inline __attribute__((always_inline)) int foo() { return 0; }
int bar() { return foo();], ljt_cv_inline="inline __attribute__((always_inline))",
AC_TRY_COMPILE(, [} __inline__ int foo() { return 0; }
int bar() { return foo();], ljt_cv_inline="__inline__",
AC_TRY_COMPILE(, [} __inline int foo() { return 0; }
@@ -217,39 +288,70 @@ AC_DEFINE_UNQUOTED([INLINE],[$ljt_cv_inline],[How to obtain function inlining.])
# Arithmetic coding support
AC_MSG_CHECKING([whether to include arithmetic encoding support])
AC_ARG_WITH([arith-enc],
AC_HELP_STRING([--without-arith-enc], [Do not include arithmetic encoding support]))
AC_HELP_STRING([--without-arith-enc],
[Do not include arithmetic encoding support when emulating the libjpeg v6b API/ABI]))
if test "x$with_12bit" = "xyes"; then
with_arith_enc=no
fi
if test "x${with_jpeg8}" = "xyes" -o "x${with_jpeg7}" = "xyes"; then
with_arith_enc=yes
fi
if test "x$with_arith_enc" = "xno"; then
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-arith-enc"
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-arith-enc"
else
AC_DEFINE([C_ARITH_CODING_SUPPORTED], [1], [Support arithmetic encoding])
AC_MSG_RESULT(yes)
AC_DEFINE([C_ARITH_CODING_SUPPORTED], [1], [Support arithmetic encoding])
AC_MSG_RESULT(yes)
fi
AM_CONDITIONAL([WITH_ARITH_ENC], [test "x$with_arith_enc" != "xno"])
AC_MSG_CHECKING([whether to include arithmetic decoding support])
AC_ARG_WITH([arith-dec],
AC_HELP_STRING([--without-arith-dec], [Do not include arithmetic decoding support]))
AC_HELP_STRING([--without-arith-dec],
[Do not include arithmetic decoding support when emulating the libjpeg v6b API/ABI]))
if test "x$with_12bit" = "xyes"; then
with_arith_dec=no
fi
if test "x${with_jpeg8}" = "xyes" -o "x${with_jpeg7}" = "xyes"; then
with_arith_dec=yes
fi
if test "x$with_arith_dec" = "xno"; then
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-arith-dec"
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-arith-dec"
else
AC_DEFINE([D_ARITH_CODING_SUPPORTED], [1], [Support arithmetic decoding])
AC_MSG_RESULT(yes)
AC_DEFINE([D_ARITH_CODING_SUPPORTED], [1], [Support arithmetic decoding])
AC_MSG_RESULT(yes)
fi
AM_CONDITIONAL([WITH_ARITH_DEC], [test "x$with_arith_dec" != "xno"])
AM_CONDITIONAL([WITH_ARITH], [test "x$with_arith_dec" != "xno" -o "x$with_arith_enc" != "xno"])
AM_CONDITIONAL([WITH_ARITH],
[test "x$with_arith_dec" != "xno" -o "x$with_arith_enc" != "xno"])
# 12-bit component support
AC_MSG_CHECKING([whether to use 12-bit samples])
AC_ARG_WITH([12bit],
AC_HELP_STRING([--with-12bit], [Encode/decode JPEG images with 12-bit samples (implies --without-simd --without-turbojpeg --without-arith-dec --without-arith-enc)]))
if test "x$with_12bit" = "xyes"; then
AC_DEFINE([BITS_IN_JSAMPLE], [12], [use 8 or 12])
AC_MSG_RESULT(yes)
else
AC_MSG_RESULT(no)
fi
AM_CONDITIONAL([WITH_12BIT], [test "x$with_12bit" = "xyes"])
# TurboJPEG support
AC_MSG_CHECKING([whether to build TurboJPEG C wrapper])
AC_ARG_WITH([turbojpeg],
AC_HELP_STRING([--without-turbojpeg],[Do not include the TurboJPEG wrapper library and associated test programs]))
AC_HELP_STRING([--without-turbojpeg],
[Do not include the TurboJPEG wrapper library and associated test programs]))
if test "x$with_12bit" = "xyes"; then
with_turbojpeg=no
fi
if test "x$with_turbojpeg" = "xno"; then
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-turbojpeg"
AC_MSG_RESULT(no)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --without-turbojpeg"
else
AC_MSG_RESULT(yes)
AC_MSG_RESULT(yes)
fi
# Java support
@@ -270,47 +372,48 @@ if test "x$JAVA" = "x"; then
JAVA=java
fi
AC_SUBST(JAVA)
AC_ARG_VAR(JNI_CFLAGS, [C compiler flags needed to include jni.h (default: -I/System/Library/Frameworks/JavaVM.framework/Headers on OS X, '-I/usr/java/include -I/usr/java/include/solaris' on Solaris, and '-I/usr/java/default/include -I/usr/java/default/include/linux' on Linux)])
AC_ARG_VAR(JNI_CFLAGS,
[C compiler flags needed to include jni.h (default: -I/System/Library/Frameworks/JavaVM.framework/Headers on OS X, '-I/usr/java/include -I/usr/java/include/solaris' on Solaris, and '-I/usr/java/default/include -I/usr/java/default/include/linux' on Linux)])
AC_MSG_CHECKING([whether to build TurboJPEG Java wrapper])
AC_ARG_WITH([java],
AC_HELP_STRING([--with-java],[Build Java wrapper for the TurboJPEG library]))
if test "x$with_turbojpeg" = "xno"; then
with_java=no
AC_HELP_STRING([--with-java], [Build Java wrapper for the TurboJPEG library]))
if test "x$with_12bit" = "xyes" -o "x$with_turbojpeg" = "xno"; then
with_java=no
fi
WITH_JAVA=0
if test "x$with_java" = "xyes"; then
AC_MSG_RESULT(yes)
AC_MSG_RESULT(yes)
case $host_os in
darwin*)
DEFAULT_JNI_CFLAGS=-I/System/Library/Frameworks/JavaVM.framework/Headers
;;
solaris*)
DEFAULT_JNI_CFLAGS='-I/usr/java/include -I/usr/java/include/solaris'
;;
linux*)
DEFAULT_JNI_CFLAGS='-I/usr/java/default/include -I/usr/java/default/include/linux'
;;
esac
if test "x$JNI_CFLAGS" = "x"; then
JNI_CFLAGS=$DEFAULT_JNI_CFLAGS
fi
case $host_os in
darwin*)
DEFAULT_JNI_CFLAGS=-I/System/Library/Frameworks/JavaVM.framework/Headers
;;
solaris*)
DEFAULT_JNI_CFLAGS='-I/usr/java/include -I/usr/java/include/solaris'
;;
linux*)
DEFAULT_JNI_CFLAGS='-I/usr/java/default/include -I/usr/java/default/include/linux'
;;
esac
if test "x$JNI_CFLAGS" = "x"; then
JNI_CFLAGS=$DEFAULT_JNI_CFLAGS
fi
SAVE_CPPFLAGS=${CPPFLAGS}
CPPFLAGS="${CPPFLAGS} ${JNI_CFLAGS}"
AC_CHECK_HEADERS([jni.h], [DUMMY=1],
[AC_MSG_ERROR([Could not find JNI header file])])
CPPFLAGS=${SAVE_CPPFLAGS}
AC_SUBST(JNI_CFLAGS)
SAVE_CPPFLAGS=${CPPFLAGS}
CPPFLAGS="${CPPFLAGS} ${JNI_CFLAGS}"
AC_CHECK_HEADERS([jni.h], [DUMMY=1],
[AC_MSG_ERROR([Could not find JNI header file])])
CPPFLAGS=${SAVE_CPPFLAGS}
AC_SUBST(JNI_CFLAGS)
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --with-java"
JAVA_RPM_CONTENTS_1='%dir /opt/%{name}/classes'
JAVA_RPM_CONTENTS_2=/opt/%{name}/classes/turbojpeg.jar
WITH_JAVA=1
RPM_CONFIG_ARGS="$RPM_CONFIG_ARGS --with-java"
JAVA_RPM_CONTENTS_1='%dir %{_datadir}/classes'
JAVA_RPM_CONTENTS_2=%{_datadir}/classes/turbojpeg.jar
WITH_JAVA=1
else
AC_MSG_RESULT(no)
AC_MSG_RESULT(no)
fi
AM_CONDITIONAL([WITH_JAVA], [test "x$with_java" = "xyes"])
AC_SUBST(WITH_JAVA)
@@ -319,7 +422,8 @@ AC_SUBST(JAVA_RPM_CONTENTS_2)
# optionally force using gas-preprocessor.pl for compatibility testing
AC_ARG_WITH([gas-preprocessor],
AC_HELP_STRING([--with-gas-preprocessor],[Force using gas-preprocessor.pl on ARM.]))
AC_HELP_STRING([--with-gas-preprocessor],
[Force using gas-preprocessor.pl on ARM.]))
if test "x${with_gas_preprocessor}" = "xyes"; then
case $host_os in
darwin*)
@@ -334,8 +438,15 @@ fi
# SIMD is optional
AC_ARG_WITH([simd],
AC_HELP_STRING([--without-simd],[Do not include SIMD extensions]))
AC_HELP_STRING([--without-simd], [Do not include SIMD extensions]))
if test "x$with_12bit" = "xyes"; then
with_simd=no
fi
if test "x${with_simd}" != "xno"; then
require_simd=no
if test "x${with_simd}" = "xyes"; then
require_simd=yes
fi
# Check if we're on a supported CPU
AC_MSG_CHECKING([if we have SIMD optimisations for cpu type])
case "$host_cpu" in
@@ -343,27 +454,81 @@ if test "x${with_simd}" != "xno"; then
AC_MSG_RESULT([yes (x86_64)])
AC_PROG_NASM
simd_arch=x86_64
;;
;;
i*86 | x86 | ia32)
AC_MSG_RESULT([yes (i386)])
AC_PROG_NASM
simd_arch=i386
;;
;;
arm*)
AC_MSG_RESULT([yes (arm)])
AC_MSG_CHECKING([if the assembler is GNU-compatible and can be used])
AC_CHECK_COMPATIBLE_ARM_ASSEMBLER_IFELSE(
[AC_MSG_RESULT([yes])
[if test "x$ac_use_gas_preprocessor" = "xyes"; then
AC_MSG_RESULT([yes (with gas-preprocessor)])
else
AC_MSG_RESULT([yes])
fi
simd_arch=arm],
[AC_MSG_RESULT([no])
with_simd=no
AC_MSG_WARN([SIMD support can't be enabled. Performance will suffer.])])
;;
with_simd=no])
if test "x${with_simd}" = "xno"; then
if test "x${require_simd}" = "xyes"; then
AC_MSG_ERROR([SIMD support can't be enabled.])
else
AC_MSG_WARN([SIMD support can't be enabled. Performance will suffer.])
fi
fi
;;
aarch64*)
AC_MSG_RESULT([yes (arm64)])
AC_MSG_CHECKING([if the assembler is GNU-compatible and can be used])
AC_CHECK_COMPATIBLE_ARM64_ASSEMBLER_IFELSE(
[if test "x$ac_use_gas_preprocessor" = "xyes"; then
AC_MSG_RESULT([yes (with gas-preprocessor)])
else
AC_MSG_RESULT([yes])
fi
simd_arch=aarch64],
[AC_MSG_RESULT([no])
with_simd=no])
if test "x${with_simd}" = "xno"; then
if test "x${require_simd}" = "xyes"; then
AC_MSG_ERROR([SIMD support can't be enabled.])
else
AC_MSG_WARN([SIMD support can't be enabled. Performance will suffer.])
fi
fi
;;
mips*)
AC_MSG_RESULT([yes (mips)])
AC_MSG_CHECKING([if the assembler is GNU-compatible and can be used])
AC_CHECK_COMPATIBLE_MIPS_ASSEMBLER_IFELSE(
[AC_MSG_RESULT([yes])
simd_arch=mips],
[AC_MSG_RESULT([no])
with_simd=no])
if test "x${with_simd}" = "xno"; then
if test "x${require_simd}" = "xyes"; then
AC_MSG_ERROR([SIMD support can't be enabled.])
else
AC_MSG_WARN([SIMD support can't be enabled. Performance will suffer.])
fi
fi
;;
powerpc*)
AC_MSG_RESULT([yes (powerpc)])
simd_arch=powerpc
;;
*)
AC_MSG_RESULT([no ("$host_cpu")])
AC_MSG_WARN([SIMD support not available for this CPU. Performance will suffer.])
with_simd=no;
;;
if test "x${require_simd}" = "xyes"; then
AC_MSG_ERROR([SIMD support not available for this CPU.])
else
AC_MSG_WARN([SIMD support not available for this CPU. Performance will suffer.])
fi
;;
esac
if test "x${with_simd}" != "xno"; then
@@ -378,8 +543,18 @@ AM_CONDITIONAL([WITH_SSE_FLOAT_DCT], [test "x$simd_arch" = "xx86_64" -o "x$simd_
AM_CONDITIONAL([SIMD_I386], [test "x$simd_arch" = "xi386"])
AM_CONDITIONAL([SIMD_X86_64], [test "x$simd_arch" = "xx86_64"])
AM_CONDITIONAL([SIMD_ARM], [test "x$simd_arch" = "xarm"])
AM_CONDITIONAL([SIMD_ARM_64], [test "x$simd_arch" = "xaarch64"])
AM_CONDITIONAL([SIMD_MIPS], [test "x$simd_arch" = "xmips"])
AM_CONDITIONAL([SIMD_POWERPC], [test "x$simd_arch" = "xpowerpc"])
AM_CONDITIONAL([X86_64], [test "x$host_cpu" = "xx86_64" -o "x$host_cpu" = "xamd64"])
AM_CONDITIONAL([WITH_TURBOJPEG], [test "x$with_turbojpeg" != "xno"])
AM_CONDITIONAL([CROSS_COMPILING], [test "x$cross_compiling" = "xyes"])
AC_ARG_VAR(PKGNAME, [distribution package name (default: libjpeg-turbo)])
if test "x$PKGNAME" = "x"; then
PKGNAME=$PACKAGE_NAME
fi
AC_SUBST(PKGNAME)
case "$host_cpu" in
x86_64)
@@ -390,35 +565,47 @@ case "$host_cpu" in
RPMARCH=i386
DEBARCH=i386
;;
*)
RPMARCH=`uname -m`
DEBARCH=$RPMARCH
;;
esac
if test "${docdir}" = ""; then
docdir=${datadir}/doc
AC_SUBST(docdir)
fi
AC_SUBST(RPMARCH)
AC_SUBST(RPM_CONFIG_ARGS)
AC_SUBST(DEBARCH)
AC_SUBST(BUILD)
AC_DEFINE_UNQUOTED([BUILD], "$BUILD", [Build number])
AC_DEFINE_UNQUOTED([BUILD], "$BUILD", [libjpeg-turbo build number])
# jconfig.h is the file we use, but we have another before that to
# fool autoheader. the reason is that we include this header in our
# API headers, which can screw things up for users of the lib.
# jconfig.h is a minimal version that allows this package to be built
# NOTE: autoheader automatically modifies the input file of the first
# invocation of AC_CONFIG_HEADERS, so we put config.h first to prevent
# jconfig.h.in from being clobbered. config.h is used only internally, whereas
# jconfig.h contains macros that are relevant to external programs (macros that
# specify which features were built into the library.)
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_HEADERS([jconfig.h])
AC_CONFIG_FILES([pkgscripts/libjpeg-turbo.spec:release/libjpeg-turbo.spec.in])
AC_CONFIG_FILES([pkgscripts/makecygwinpkg:release/makecygwinpkg.in])
AC_CONFIG_FILES([pkgscripts/makedpkg:release/makedpkg.in])
AC_CONFIG_FILES([pkgscripts/makemacpkg:release/makemacpkg.in])
AC_CONFIG_FILES([pkgscripts/Description.plist:release/Description.plist.in])
AC_CONFIG_FILES([pkgscripts/Info.plist:release/Info.plist.in])
AC_CONFIG_FILES([pkgscripts/uninstall:release/uninstall.in])
AC_CONFIG_HEADERS([jconfigint.h])
AC_CONFIG_FILES([pkgscripts/libjpeg-turbo.spec.tmpl:release/libjpeg-turbo.spec.in])
AC_CONFIG_FILES([pkgscripts/makecygwinpkg.tmpl:release/makecygwinpkg.in])
AC_CONFIG_FILES([pkgscripts/makedpkg.tmpl:release/makedpkg.in])
AC_CONFIG_FILES([pkgscripts/makemacpkg.tmpl:release/makemacpkg.in])
AC_CONFIG_FILES([pkgscripts/uninstall.tmpl:release/uninstall.in])
AC_CONFIG_FILES([pkgscripts/libjpeg.pc:release/libjpeg.pc.in])
AC_CONFIG_FILES([pkgscripts/libturbojpeg.pc:release/libturbojpeg.pc.in])
if test "x$with_turbojpeg" != "xno"; then
AC_CONFIG_FILES([tjbenchtest])
AC_CONFIG_FILES([tjbenchtest])
fi
if test "x$with_java" = "xyes"; then
AC_CONFIG_FILES([tjbenchtest.java])
AC_CONFIG_FILES([tjexampletest])
AC_CONFIG_FILES([tjbenchtest.java])
AC_CONFIG_FILES([tjexampletest])
fi
AC_CONFIG_FILES([libjpeg.map])
AC_CONFIG_FILES([Makefile simd/Makefile])
AC_CONFIG_FILES([java/Makefile])
AC_CONFIG_FILES([md5/Makefile])
AC_OUTPUT

70
djpeg.1
View File

@@ -1,4 +1,4 @@
.TH DJPEG 1 "18 January 2013"
.TH DJPEG 1 "18 February 2016"
.SH NAME
djpeg \- decompress a JPEG file to an image file
.SH SYNOPSIS
@@ -55,11 +55,14 @@ default options are chosen for highest quality output.) Currently, this is
equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR.
.TP
.B \-grayscale
Force gray-scale output even if JPEG file is color. Useful for viewing on
Force grayscale output even if JPEG file is color. Useful for viewing on
monochrome displays; also,
.B djpeg
runs noticeably faster in this mode.
.TP
.B \-rgb
Force RGB output even if JPEG file is grayscale.
.TP
.BI \-scale " M/N"
Scale the output image by a factor M/N. Currently the scale factor must be
M/8, where M is an integer between 1 and 16 inclusive, or any reduced fraction
@@ -74,7 +77,7 @@ emitted if
.B \-colors
or
.B \-grayscale
is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
format is emitted.
.TP
.B \-gif
@@ -88,12 +91,12 @@ emitted if
.B \-colors
or
.B \-grayscale
is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
format is emitted.
.TP
.B \-pnm
Select PBMPLUS (PPM/PGM) output format (this is the default format).
PGM is emitted if the JPEG file is gray-scale or if
PGM is emitted if the JPEG file is grayscale or if
.B \-grayscale
is specified; otherwise PPM is emitted.
.TP
@@ -101,8 +104,8 @@ is specified; otherwise PPM is emitted.
Select RLE output format. (Requires URT library.)
.TP
.B \-targa
Select Targa output format. Gray-scale format is emitted if the JPEG file is
gray-scale or if
Select Targa output format. Grayscale format is emitted if the JPEG file is
grayscale or if
.B \-grayscale
is specified; otherwise, colormapped format is emitted if
.B \-colors
@@ -115,14 +118,28 @@ Use integer DCT method (default).
.TP
.B \-dct fast
Use fast integer DCT (less accurate).
In libjpeg-turbo, the fast method is generally about 5-15% faster than the int
method when using the x86/x86-64 SIMD extensions (results may vary with other
SIMD implementations, or when using libjpeg-turbo without SIMD extensions.) If
the JPEG image was compressed using a quality level of 85 or below, then there
should be little or no perceptible difference between the two algorithms. When
decompressing images that were compressed using quality levels above 85,
however, the difference between the fast and int methods becomes more
pronounced. With images compressed using quality=97, for instance, the fast
method incurs generally about a 4-6 dB loss (in PSNR) relative to the int
method, but this can be larger for some images. If you can avoid it, do not
use the fast method when decompressing images that were compressed using
quality levels above 97. The algorithm often degenerates for such images and
can actually produce a more lossy output image than if the JPEG image had been
compressed using lower quality levels.
.TP
.B \-dct float
Use floating-point DCT method.
The float method is very slightly more accurate than the int method, but is
much slower unless your machine has very fast floating-point hardware. Also
note that results of the floating-point method may vary slightly across
machines, while the integer methods should give the same results everywhere.
The fast integer method is much less accurate than the other two.
The float method is mainly a legacy feature. It does not produce significantly
more accurate results than the int method, and it is much slower. The float
method may also give different results on different machines due to varying
roundoff behavior, whereas the integer methods should give the same results on
all machines.
.TP
.B \-dither fs
Use Floyd-Steinberg dithering in color quantization.
@@ -160,7 +177,7 @@ faster and needs less memory, but it produces a lower-quality image.
is ignored unless you also say
.B \-colors
.IR N .
Also, the one-pass method is always used for gray-scale output (the two-pass
Also, the one-pass method is always used for grayscale output (the two-pass
method is no improvement then).
.TP
.BI \-maxmemory " N"
@@ -177,6 +194,18 @@ Send output image to the named file, not to standard output.
Load input file into memory before decompressing. This feature was implemented
mainly as a way of testing the in-memory source manager (jpeg_mem_src().)
.TP
.BI \-skip " Y0,Y1"
Decompress all rows of the JPEG image except those between Y0 and Y1
(inclusive.) Note that if decompression scaling is being used, then Y0 and Y1
are relative to the scaled image dimensions.
.TP
.BI \-crop " WxH+X+Y"
Decompress only a rectangular subregion of the image, starting at point X,Y
with width W and height H. If necessary, X will be shifted left to the nearest
iMCU boundary, and the width will be increased accordingly. Note that if
decompression scaling is being used, then X, Y, W, and H are relative to the
scaled image dimensions.
.TP
.B \-verbose
Enable debug printout. More
.BR \-v 's
@@ -185,6 +214,9 @@ give more output. Also, version information is printed at startup.
.B \-debug
Same as
.BR \-verbose .
.TP
.B \-version
Print version information and exit.
.SH EXAMPLES
.LP
This example decompresses the JPEG file foo.jpg, quantizes it to
@@ -251,8 +283,10 @@ Independent JPEG Group
This file was modified by The libjpeg-turbo Project to include only information
relevant to libjpeg-turbo, to wordsmith certain sections, and to describe
features not present in libjpeg.
.SH BUGS
To avoid the Unisys LZW patent,
.B djpeg
produces uncompressed GIF files. These are larger than they should be, but
are readable by standard GIF decoders.
.SH ISSUES
Support for compressed GIF output files was removed in djpeg v6b due to
concerns over the Unisys LZW patent. Although this patent expired in 2006,
djpeg still lacks compressed GIF support, for these historical reasons.
(Conversion of JPEG files to GIF is usually a bad idea anyway, since GIF is a
256-color format.) The uncompressed GIF files that djpeg generates are larger
than they should be, but they are readable by standard GIF decoders.

355
djpeg.c
View File

@@ -3,17 +3,20 @@
*
* This file was part of the Independent JPEG Group's software:
* Copyright (C) 1991-1997, Thomas G. Lane.
* Modifications:
* Copyright (C) 2010-2011, 2013, D. R. Commander.
* For conditions of distribution and use, see the accompanying README file.
* Modified 2013 by Guido Vollbeding.
* libjpeg-turbo Modifications:
* Copyright (C) 2010-2011, 2013-2016, D. R. Commander.
* Copyright (C) 2015, Google, Inc.
* For conditions of distribution and use, see the accompanying README.ijg
* file.
*
* This file contains a command-line user interface for the JPEG decompressor.
* It should work on any system with Unix- or MS-DOS-style command lines.
*
* Two different command line styles are permitted, depending on the
* compile-time switch TWO_FILE_COMMANDLINE:
* djpeg [options] inputfile outputfile
* djpeg [options] [inputfile]
* djpeg [options] inputfile outputfile
* djpeg [options] [inputfile]
* In the second style, output is always to standard output, which you'd
* normally redirect to a file or pipe to some other program. Input is
* either from a named file or from standard input (typically redirected).
@@ -21,30 +24,31 @@
* don't support pipes. Also, you MUST use the first style if your system
* doesn't do binary I/O to stdin/stdout.
* To simplify script writing, the "-outfile" switch is provided. The syntax
* djpeg [options] -outfile outputfile inputfile
* djpeg [options] -outfile outputfile inputfile
* works regardless of which command line style is used.
*/
#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
#include "jversion.h" /* for version message */
#include "config.h"
#include "cdjpeg.h" /* Common decls for cjpeg/djpeg applications */
#include "jversion.h" /* for version message */
#include "jconfigint.h"
#include "wrppm.h"
#include <ctype.h> /* to declare isprint() */
#include <ctype.h> /* to declare isprint() */
#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
#ifdef USE_CCOMMAND /* command-line reader for Macintosh */
#ifdef __MWERKS__
#include <SIOUX.h> /* Metrowerks needs this */
#include <console.h> /* ... and this */
#include <console.h> /* ... and this */
#endif
#ifdef THINK_C
#include <console.h> /* Think declares it here */
#include <console.h> /* Think declares it here */
#endif
#endif
/* Create the add-on message string table. */
#define JMESSAGE(code,string) string ,
#define JMESSAGE(code,string) string ,
static const char * const cdjpeg_message_table[] = {
#include "cderror.h"
@@ -60,17 +64,17 @@ static const char * const cdjpeg_message_table[] = {
*/
typedef enum {
FMT_BMP, /* BMP format (Windows flavor) */
FMT_GIF, /* GIF format */
FMT_OS2, /* BMP format (OS/2 flavor) */
FMT_PPM, /* PPM/PGM (PBMPLUS formats) */
FMT_RLE, /* RLE format */
FMT_TARGA, /* Targa format */
FMT_TIFF /* TIFF format */
FMT_BMP, /* BMP format (Windows flavor) */
FMT_GIF, /* GIF format */
FMT_OS2, /* BMP format (OS/2 flavor) */
FMT_PPM, /* PPM/PGM (PBMPLUS formats) */
FMT_RLE, /* RLE format */
FMT_TARGA, /* Targa format */
FMT_TIFF /* TIFF format */
} IMAGE_FORMATS;
#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */
#define DEFAULT_FMT FMT_PPM
#ifndef DEFAULT_FMT /* so can override from CFLAGS in Makefile */
#define DEFAULT_FMT FMT_PPM
#endif
static IMAGE_FORMATS requested_fmt;
@@ -85,9 +89,12 @@ static IMAGE_FORMATS requested_fmt;
*/
static const char * progname; /* program name for error messages */
static char * outfilename; /* for -outfile switch */
boolean memsrc; /* for -memsrc switch */
static const char *progname; /* program name for error messages */
static char *outfilename; /* for -outfile switch */
boolean memsrc; /* for -memsrc switch */
boolean skip, crop;
JDIMENSION skip_start, skip_end;
JDIMENSION crop_x, crop_y, crop_width, crop_height;
#define INPUT_BUF_SIZE 4096
@@ -107,45 +114,46 @@ usage (void)
fprintf(stderr, " -fast Fast, low-quality processing\n");
fprintf(stderr, " -grayscale Force grayscale output\n");
fprintf(stderr, " -rgb Force RGB output\n");
fprintf(stderr, " -rgb565 Force RGB565 output\n");
#ifdef IDCT_SCALING_SUPPORTED
fprintf(stderr, " -scale M/N Scale output image by fraction M/N, eg, 1/8\n");
#endif
#ifdef BMP_SUPPORTED
fprintf(stderr, " -bmp Select BMP output format (Windows style)%s\n",
(DEFAULT_FMT == FMT_BMP ? " (default)" : ""));
(DEFAULT_FMT == FMT_BMP ? " (default)" : ""));
#endif
#ifdef GIF_SUPPORTED
fprintf(stderr, " -gif Select GIF output format%s\n",
(DEFAULT_FMT == FMT_GIF ? " (default)" : ""));
(DEFAULT_FMT == FMT_GIF ? " (default)" : ""));
#endif
#ifdef BMP_SUPPORTED
fprintf(stderr, " -os2 Select BMP output format (OS/2 style)%s\n",
(DEFAULT_FMT == FMT_OS2 ? " (default)" : ""));
(DEFAULT_FMT == FMT_OS2 ? " (default)" : ""));
#endif
#ifdef PPM_SUPPORTED
fprintf(stderr, " -pnm Select PBMPLUS (PPM/PGM) output format%s\n",
(DEFAULT_FMT == FMT_PPM ? " (default)" : ""));
(DEFAULT_FMT == FMT_PPM ? " (default)" : ""));
#endif
#ifdef RLE_SUPPORTED
fprintf(stderr, " -rle Select Utah RLE output format%s\n",
(DEFAULT_FMT == FMT_RLE ? " (default)" : ""));
(DEFAULT_FMT == FMT_RLE ? " (default)" : ""));
#endif
#ifdef TARGA_SUPPORTED
fprintf(stderr, " -targa Select Targa output format%s\n",
(DEFAULT_FMT == FMT_TARGA ? " (default)" : ""));
(DEFAULT_FMT == FMT_TARGA ? " (default)" : ""));
#endif
fprintf(stderr, "Switches for advanced users:\n");
#ifdef DCT_ISLOW_SUPPORTED
fprintf(stderr, " -dct int Use integer DCT method%s\n",
(JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
(JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
#endif
#ifdef DCT_IFAST_SUPPORTED
fprintf(stderr, " -dct fast Use fast integer DCT (less accurate)%s\n",
(JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
(JDCT_DEFAULT == JDCT_IFAST ? " (default)" : ""));
#endif
#ifdef DCT_FLOAT_SUPPORTED
fprintf(stderr, " -dct float Use floating-point DCT method%s\n",
(JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
(JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
#endif
fprintf(stderr, " -dither fs Use F-S dithering (default)\n");
fprintf(stderr, " -dither none Don't use dithering in quantization\n");
@@ -163,14 +171,17 @@ usage (void)
fprintf(stderr, " -memsrc Load input file into memory before decompressing\n");
#endif
fprintf(stderr, " -skip Y0,Y1 Decompress all rows except those between Y0 and Y1 (inclusive)\n");
fprintf(stderr, " -crop WxH+X+Y Decompress only a rectangular subregion of the image\n");
fprintf(stderr, " -verbose or -debug Emit debug output\n");
fprintf(stderr, " -version Print version information and exit\n");
exit(EXIT_FAILURE);
}
LOCAL(int)
parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
int last_file_arg_seen, boolean for_real)
int last_file_arg_seen, boolean for_real)
/* Parse optional switches.
* Returns argv[] index of first file-name argument (== argc if none).
* Any file names with indexes <= last_file_arg_seen are ignored;
@@ -181,12 +192,14 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
*/
{
int argn;
char * arg;
char *arg;
/* Set up default JPEG parameters. */
requested_fmt = DEFAULT_FMT; /* set default output file format */
requested_fmt = DEFAULT_FMT; /* set default output file format */
outfilename = NULL;
memsrc = FALSE;
skip = FALSE;
crop = FALSE;
cinfo->err->trace_level = 0;
/* Scan command line options, adjust parameters */
@@ -196,54 +209,54 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
if (*arg != '-') {
/* Not a switch, must be a file name argument */
if (argn <= last_file_arg_seen) {
outfilename = NULL; /* -outfile applies to just one input file */
continue; /* ignore this name if previously processed */
outfilename = NULL; /* -outfile applies to just one input file */
continue; /* ignore this name if previously processed */
}
break; /* else done parsing switches */
break; /* else done parsing switches */
}
arg++; /* advance past switch marker character */
arg++; /* advance past switch marker character */
if (keymatch(arg, "bmp", 1)) {
/* BMP output format. */
requested_fmt = FMT_BMP;
} else if (keymatch(arg, "colors", 1) || keymatch(arg, "colours", 1) ||
keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) {
keymatch(arg, "quantize", 1) || keymatch(arg, "quantise", 1)) {
/* Do color quantization. */
int val;
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%d", &val) != 1)
usage();
usage();
cinfo->desired_number_of_colors = val;
cinfo->quantize_colors = TRUE;
} else if (keymatch(arg, "dct", 2)) {
/* Select IDCT algorithm. */
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (keymatch(argv[argn], "int", 1)) {
cinfo->dct_method = JDCT_ISLOW;
cinfo->dct_method = JDCT_ISLOW;
} else if (keymatch(argv[argn], "fast", 2)) {
cinfo->dct_method = JDCT_IFAST;
cinfo->dct_method = JDCT_IFAST;
} else if (keymatch(argv[argn], "float", 2)) {
cinfo->dct_method = JDCT_FLOAT;
cinfo->dct_method = JDCT_FLOAT;
} else
usage();
usage();
} else if (keymatch(arg, "dither", 2)) {
/* Select dithering algorithm. */
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (keymatch(argv[argn], "fs", 2)) {
cinfo->dither_mode = JDITHER_FS;
cinfo->dither_mode = JDITHER_FS;
} else if (keymatch(argv[argn], "none", 2)) {
cinfo->dither_mode = JDITHER_NONE;
cinfo->dither_mode = JDITHER_NONE;
} else if (keymatch(argv[argn], "ordered", 2)) {
cinfo->dither_mode = JDITHER_ORDERED;
cinfo->dither_mode = JDITHER_ORDERED;
} else
usage();
usage();
} else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
/* Enable debug printouts. */
@@ -251,21 +264,26 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
static boolean printed_version = FALSE;
if (! printed_version) {
fprintf(stderr, "%s version %s (build %s)\n",
PACKAGE_NAME, VERSION, BUILD);
fprintf(stderr, "%s\n\n", JCOPYRIGHT);
fprintf(stderr, "Emulating The Independent JPEG Group's libjpeg, version %s\n\n",
JVERSION);
printed_version = TRUE;
fprintf(stderr, "%s version %s (build %s)\n",
PACKAGE_NAME, VERSION, BUILD);
fprintf(stderr, "%s\n\n", JCOPYRIGHT);
fprintf(stderr, "Emulating The Independent JPEG Group's software, version %s\n\n",
JVERSION);
printed_version = TRUE;
}
cinfo->err->trace_level++;
} else if (keymatch(arg, "version", 4)) {
fprintf(stderr, "%s version %s (build %s)\n",
PACKAGE_NAME, VERSION, BUILD);
exit(EXIT_SUCCESS);
} else if (keymatch(arg, "fast", 1)) {
/* Select recommended processing options for quick-and-dirty output. */
cinfo->two_pass_quantize = FALSE;
cinfo->dither_mode = JDITHER_ORDERED;
if (! cinfo->quantize_colors) /* don't override an earlier -colors */
cinfo->desired_number_of_colors = 216;
cinfo->desired_number_of_colors = 216;
cinfo->dct_method = JDCT_FASTEST;
cinfo->do_fancy_upsampling = FALSE;
@@ -281,23 +299,27 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
/* Force RGB output. */
cinfo->out_color_space = JCS_RGB;
} else if (keymatch(arg, "rgb565", 2)) {
/* Force RGB565 output. */
cinfo->out_color_space = JCS_RGB565;
} else if (keymatch(arg, "map", 3)) {
/* Quantize to a color map taken from an input file. */
if (++argn >= argc) /* advance to next argument */
usage();
if (for_real) { /* too expensive to do twice! */
#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */
FILE * mapfile;
if (++argn >= argc) /* advance to next argument */
usage();
if (for_real) { /* too expensive to do twice! */
#ifdef QUANT_2PASS_SUPPORTED /* otherwise can't quantize to supplied map */
FILE *mapfile;
if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
exit(EXIT_FAILURE);
}
read_color_map(cinfo, mapfile);
fclose(mapfile);
cinfo->quantize_colors = TRUE;
if ((mapfile = fopen(argv[argn], READ_BINARY)) == NULL) {
fprintf(stderr, "%s: can't open %s\n", progname, argv[argn]);
exit(EXIT_FAILURE);
}
read_color_map(cinfo, mapfile);
fclose(mapfile);
cinfo->quantize_colors = TRUE;
#else
ERREXIT(cinfo, JERR_NOT_COMPILED);
ERREXIT(cinfo, JERR_NOT_COMPILED);
#endif
}
@@ -306,12 +328,12 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
long lval;
char ch = 'x';
if (++argn >= argc) /* advance to next argument */
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%ld%c", &lval, &ch) < 1)
usage();
usage();
if (ch == 'm' || ch == 'M')
lval *= 1000L;
lval *= 1000L;
cinfo->mem->max_memory_to_use = lval * 1000L;
} else if (keymatch(arg, "nosmooth", 3)) {
@@ -328,9 +350,9 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
} else if (keymatch(arg, "outfile", 4)) {
/* Set output file name. */
if (++argn >= argc) /* advance to next argument */
usage();
outfilename = argv[argn]; /* save it away for later use */
if (++argn >= argc) /* advance to next argument */
usage();
outfilename = argv[argn]; /* save it away for later use */
} else if (keymatch(arg, "memsrc", 2)) {
/* Use in-memory source manager */
@@ -350,24 +372,42 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
/* RLE output format. */
requested_fmt = FMT_RLE;
} else if (keymatch(arg, "scale", 1)) {
} else if (keymatch(arg, "scale", 2)) {
/* Scale the output image by a fraction M/N. */
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%d/%d",
&cinfo->scale_num, &cinfo->scale_denom) != 2)
usage();
if (++argn >= argc) /* advance to next argument */
usage();
if (sscanf(argv[argn], "%u/%u",
&cinfo->scale_num, &cinfo->scale_denom) != 2)
usage();
} else if (keymatch(arg, "skip", 2)) {
if (++argn >= argc)
usage();
if (sscanf(argv[argn], "%u,%u", &skip_start, &skip_end) != 2 ||
skip_start > skip_end)
usage();
skip = TRUE;
} else if (keymatch(arg, "crop", 2)) {
char c;
if (++argn >= argc)
usage();
if (sscanf(argv[argn], "%u%c%u+%u+%u", &crop_width, &c, &crop_height,
&crop_x, &crop_y) != 5 ||
(c != 'X' && c != 'x') || crop_width < 1 || crop_height < 1)
usage();
crop = TRUE;
} else if (keymatch(arg, "targa", 1)) {
/* Targa output format. */
requested_fmt = FMT_TARGA;
} else {
usage(); /* bogus switch */
usage(); /* bogus switch */
}
}
return argn; /* return index of next arg (file name) */
return argn; /* return index of next arg (file name) */
}
@@ -382,7 +422,7 @@ LOCAL(unsigned int)
jpeg_getc (j_decompress_ptr cinfo)
/* Read next byte */
{
struct jpeg_source_mgr * datasrc = cinfo->src;
struct jpeg_source_mgr *datasrc = cinfo->src;
if (datasrc->bytes_in_buffer == 0) {
if (! (*datasrc->fill_input_buffer) (cinfo))
@@ -397,20 +437,20 @@ METHODDEF(boolean)
print_text_marker (j_decompress_ptr cinfo)
{
boolean traceit = (cinfo->err->trace_level >= 1);
INT32 length;
long length;
unsigned int ch;
unsigned int lastch = 0;
length = jpeg_getc(cinfo) << 8;
length += jpeg_getc(cinfo);
length -= 2; /* discount the length word itself */
length -= 2; /* discount the length word itself */
if (traceit) {
if (cinfo->unread_marker == JPEG_COM)
fprintf(stderr, "Comment, length %ld:\n", (long) length);
else /* assume it is an APPn otherwise */
else /* assume it is an APPn otherwise */
fprintf(stderr, "APP%d, length %ld:\n",
cinfo->unread_marker - JPEG_APP0, (long) length);
cinfo->unread_marker - JPEG_APP0, (long) length);
}
while (--length >= 0) {
@@ -422,16 +462,16 @@ print_text_marker (j_decompress_ptr cinfo)
* Newlines in CR, CR/LF, or LF form will be printed as one newline.
*/
if (ch == '\r') {
fprintf(stderr, "\n");
fprintf(stderr, "\n");
} else if (ch == '\n') {
if (lastch != '\r')
fprintf(stderr, "\n");
if (lastch != '\r')
fprintf(stderr, "\n");
} else if (ch == '\\') {
fprintf(stderr, "\\\\");
fprintf(stderr, "\\\\");
} else if (isprint(ch)) {
putc(ch, stderr);
putc(ch, stderr);
} else {
fprintf(stderr, "\\%03o", ch);
fprintf(stderr, "\\%03o", ch);
}
lastch = ch;
}
@@ -458,8 +498,8 @@ main (int argc, char **argv)
#endif
int file_index;
djpeg_dest_ptr dest_mgr = NULL;
FILE * input_file;
FILE * output_file;
FILE *input_file;
FILE *output_file;
unsigned char *inbuffer = NULL;
unsigned long insize = 0;
JDIMENSION num_scanlines;
@@ -471,7 +511,7 @@ main (int argc, char **argv)
progname = argv[0];
if (progname == NULL || progname[0] == 0)
progname = "djpeg"; /* in case C library doesn't provide it */
progname = "djpeg"; /* in case C library doesn't provide it */
/* Initialize the JPEG decompression object with default error handling. */
cinfo.err = jpeg_std_error(&jerr);
@@ -490,11 +530,6 @@ main (int argc, char **argv)
jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
/* Now safe to enable signal catcher. */
#ifdef NEED_SIGNAL_CATCHER
enable_signal_catcher((j_common_ptr) &cinfo);
#endif
/* Scan command line to find file names. */
/* It is convenient to use just one switch-parsing routine, but the switch
* values read here are ignored; we will rescan the switches after opening
@@ -510,14 +545,14 @@ main (int argc, char **argv)
if (outfilename == NULL) {
if (file_index != argc-2) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
progname);
usage();
}
outfilename = argv[file_index+1];
} else {
if (file_index != argc-1) {
fprintf(stderr, "%s: must name one input and one output file\n",
progname);
progname);
usage();
}
}
@@ -566,7 +601,7 @@ main (int argc, char **argv)
exit(EXIT_FAILURE);
}
nbytes = JFREAD(input_file, &inbuffer[insize], INPUT_BUF_SIZE);
if (nbytes < 0) {
if (nbytes < INPUT_BUF_SIZE && ferror(input_file)) {
if (file_index < argc)
fprintf(stderr, "%s: can't read from %s\n", progname,
argv[file_index]);
@@ -628,14 +663,88 @@ main (int argc, char **argv)
/* Start decompressor */
(void) jpeg_start_decompress(&cinfo);
/* Write output file header */
(*dest_mgr->start_output) (&cinfo, dest_mgr);
/* Skip rows */
if (skip) {
JDIMENSION tmp;
/* Process data */
while (cinfo.output_scanline < cinfo.output_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
/* Check for valid skip_end. We cannot check this value until after
* jpeg_start_decompress() is called. Note that we have already verified
* that skip_start <= skip_end.
*/
if (skip_end > cinfo.output_height - 1) {
fprintf(stderr, "%s: skip region exceeds image height %d\n", progname,
cinfo.output_height);
exit(EXIT_FAILURE);
}
/* Write output file header. This is a hack to ensure that the destination
* manager creates an output image of the proper size.
*/
tmp = cinfo.output_height;
cinfo.output_height -= (skip_end - skip_start + 1);
(*dest_mgr->start_output) (&cinfo, dest_mgr);
cinfo.output_height = tmp;
/* Process data */
while (cinfo.output_scanline < skip_start) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
jpeg_skip_scanlines(&cinfo, skip_end - skip_start + 1);
while (cinfo.output_scanline < cinfo.output_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
/* Decompress a subregion */
} else if (crop) {
JDIMENSION tmp;
/* Check for valid crop dimensions. We cannot check these values until
* after jpeg_start_decompress() is called.
*/
if (crop_x + crop_width > cinfo.output_width ||
crop_y + crop_height > cinfo.output_height) {
fprintf(stderr, "%s: crop dimensions exceed image dimensions %d x %d\n",
progname, cinfo.output_width, cinfo.output_height);
exit(EXIT_FAILURE);
}
jpeg_crop_scanline(&cinfo, &crop_x, &crop_width);
((ppm_dest_ptr) dest_mgr)->buffer_width = cinfo.output_width *
cinfo.out_color_components *
sizeof(JSAMPLE);
/* Write output file header. This is a hack to ensure that the destination
* manager creates an output image of the proper size.
*/
tmp = cinfo.output_height;
cinfo.output_height = crop_height;
(*dest_mgr->start_output) (&cinfo, dest_mgr);
cinfo.output_height = tmp;
/* Process data */
jpeg_skip_scanlines(&cinfo, crop_y);
while (cinfo.output_scanline < crop_y + crop_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
jpeg_skip_scanlines(&cinfo, cinfo.output_height - crop_y - crop_height);
/* Normal full-image decompress */
} else {
/* Write output file header */
(*dest_mgr->start_output) (&cinfo, dest_mgr);
/* Process data */
while (cinfo.output_scanline < cinfo.output_height) {
num_scanlines = jpeg_read_scanlines(&cinfo, dest_mgr->buffer,
dest_mgr->buffer_height);
(*dest_mgr->put_pixel_rows) (&cinfo, dest_mgr, num_scanlines);
}
}
#ifdef PROGRESS_REPORT
@@ -668,5 +777,5 @@ main (int argc, char **argv)
/* All done. */
exit(jerr.num_warnings ? EXIT_WARNING : EXIT_SUCCESS);
return 0; /* suppress no-return-value warnings */
return 0; /* suppress no-return-value warnings */
}

66
doc/html/annotated.html
View File

@@ -2,35 +2,46 @@
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=9"/>
<meta name="generator" content="Doxygen 1.8.3.1"/>
<title>TurboJPEG: Data Structures</title>
<link href="tabs.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript" src="dynsections.js"></script>
<link href="search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="search/search.js"></script>
<link href="doxygen.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript">
$(document).ready(function() { searchBox.OnSelectItem(0); });
</script>
<link href="doxygen.css" rel="stylesheet" type="text/css" />
<link href="doxygen-extra.css" rel="stylesheet" type="text/css"/>
</head>
<body onload='searchBox.OnSelectItem(0);'>
<!-- Generated by Doxygen 1.7.4 -->
<script type="text/javascript"><!--
var searchBox = new SearchBox("searchBox", "search",false,'Search');
--></script>
<div id="top">
<body>
<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td style="padding-left: 0.5em;">
<div id="projectname">TurboJPEG&#160;<span id="projectnumber">1.2.1</span></div>
<div id="projectname">TurboJPEG
&#160;<span id="projectnumber">1.5</span>
</div>
</td>
</tr>
</tbody>
</table>
</div>
<!-- end header part -->
<!-- Generated by Doxygen 1.8.3.1 -->
<script type="text/javascript">
var searchBox = new SearchBox("searchBox", "search",false,'Search');
</script>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li><a href="index.html"><span>Main&#160;Page</span></a></li>
<li><a href="modules.html"><span>Modules</span></a></li>
<li class="current"><a href="annotated.html"><span>Data&#160;Structures</span></a></li>
<li id="searchli">
<li>
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="search/mag_sel.png"
@@ -55,24 +66,13 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
<li><a href="functions.html"><span>Data&#160;Fields</span></a></li>
</ul>
</div>
</div>
<div class="header">
<div class="headertitle">
<div class="title">Data Structures</div> </div>
</div>
<div class="contents">
<div class="textblock">Here are the data structures with brief descriptions:</div><table>
<tr><td class="indexkey"><a class="el" href="structtjregion.html">tjregion</a></td><td class="indexvalue">Cropping region </td></tr>
<tr><td class="indexkey"><a class="el" href="structtjscalingfactor.html">tjscalingfactor</a></td><td class="indexvalue">Scaling factor </td></tr>
<tr><td class="indexkey"><a class="el" href="structtjtransform.html">tjtransform</a></td><td class="indexvalue">Lossless transform </td></tr>
</table>
</div>
</div><!-- top -->
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Variables</a></div>
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Functions</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(3)"><span class="SelectionMark">&#160;</span>Variables</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(4)"><span class="SelectionMark">&#160;</span>Typedefs</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(5)"><span class="SelectionMark">&#160;</span>Enumerations</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(6)"><span class="SelectionMark">&#160;</span>Enumerator</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(7)"><span class="SelectionMark">&#160;</span>Groups</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
@@ -81,8 +81,24 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
</iframe>
</div>
<hr class="footer"/><address class="footer"><small>Generated on Fri Jun 29 2012 18:34:09 for TurboJPEG by&#160;
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/></a> 1.7.4 </small></address>
<div class="header">
<div class="headertitle">
<div class="title">Data Structures</div> </div>
</div><!--header-->
<div class="contents">
<div class="textblock">Here are the data structures with brief descriptions:</div><div class="directory">
<table class="directory">
<tr id="row_0_" class="even"><td class="entry"><img src="ftv2node.png" alt="o" width="16" height="22" /><img src="ftv2cl.png" alt="C" width="24" height="22" /><a class="el" href="structtjregion.html" target="_self">tjregion</a></td><td class="desc">Cropping region</td></tr>
<tr id="row_1_"><td class="entry"><img src="ftv2node.png" alt="o" width="16" height="22" /><img src="ftv2cl.png" alt="C" width="24" height="22" /><a class="el" href="structtjscalingfactor.html" target="_self">tjscalingfactor</a></td><td class="desc">Scaling factor</td></tr>
<tr id="row_2_" class="even"><td class="entry"><img src="ftv2lastnode.png" alt="\" width="16" height="22" /><img src="ftv2cl.png" alt="C" width="24" height="22" /><a class="el" href="structtjtransform.html" target="_self">tjtransform</a></td><td class="desc">Lossless transform</td></tr>
</table>
</div><!-- directory -->
</div><!-- contents -->
<!-- start footer part -->
<hr class="footer"/><address class="footer"><small>
Generated by &#160;<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/>
</a> 1.8.3.1
</small></address>
</body>
</html>

BIN
doc/html/bc_s.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 677 B

After

Width:  |  Height:  |  Size: 676 B

BIN
doc/html/bdwn.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 147 B

67
doc/html/classes.html
View File

@@ -2,35 +2,46 @@
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=9"/>
<meta name="generator" content="Doxygen 1.8.3.1"/>
<title>TurboJPEG: Data Structure Index</title>
<link href="tabs.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript" src="dynsections.js"></script>
<link href="search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="search/search.js"></script>
<link href="doxygen.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript">
$(document).ready(function() { searchBox.OnSelectItem(0); });
</script>
<link href="doxygen.css" rel="stylesheet" type="text/css" />
<link href="doxygen-extra.css" rel="stylesheet" type="text/css"/>
</head>
<body onload='searchBox.OnSelectItem(0);'>
<!-- Generated by Doxygen 1.7.4 -->
<script type="text/javascript"><!--
var searchBox = new SearchBox("searchBox", "search",false,'Search');
--></script>
<div id="top">
<body>
<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td style="padding-left: 0.5em;">
<div id="projectname">TurboJPEG&#160;<span id="projectnumber">1.2.1</span></div>
<div id="projectname">TurboJPEG
&#160;<span id="projectnumber">1.5</span>
</div>
</td>
</tr>
</tbody>
</table>
</div>
<!-- end header part -->
<!-- Generated by Doxygen 1.8.3.1 -->
<script type="text/javascript">
var searchBox = new SearchBox("searchBox", "search",false,'Search');
</script>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li><a href="index.html"><span>Main&#160;Page</span></a></li>
<li><a href="modules.html"><span>Modules</span></a></li>
<li class="current"><a href="annotated.html"><span>Data&#160;Structures</span></a></li>
<li id="searchli">
<li>
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="search/mag_sel.png"
@@ -55,23 +66,13 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
<li><a href="functions.html"><span>Data&#160;Fields</span></a></li>
</ul>
</div>
</div>
<div class="header">
<div class="headertitle">
<div class="title">Data Structure Index</div> </div>
</div>
<div class="contents">
<div class="qindex"><a class="qindex" href="#letter_T">T</a></div>
<table align="center" width="95%" border="0" cellspacing="0" cellpadding="0">
<tr><td><a name="letter_T"></a><table border="0" cellspacing="0" cellpadding="0"><tr><td><div class="ah">&#160;&#160;T&#160;&#160;</div></td></tr></table>
</td><td><a class="el" href="structtjregion.html">tjregion</a>&#160;&#160;&#160;</td><td><a class="el" href="structtjscalingfactor.html">tjscalingfactor</a>&#160;&#160;&#160;</td><td><a class="el" href="structtjtransform.html">tjtransform</a>&#160;&#160;&#160;</td></tr></table><div class="qindex"><a class="qindex" href="#letter_T">T</a></div>
</div>
</div><!-- top -->
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Variables</a></div>
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Functions</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(3)"><span class="SelectionMark">&#160;</span>Variables</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(4)"><span class="SelectionMark">&#160;</span>Typedefs</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(5)"><span class="SelectionMark">&#160;</span>Enumerations</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(6)"><span class="SelectionMark">&#160;</span>Enumerator</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(7)"><span class="SelectionMark">&#160;</span>Groups</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
@@ -80,8 +81,26 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
</iframe>
</div>
<hr class="footer"/><address class="footer"><small>Generated on Fri Jun 29 2012 18:34:09 for TurboJPEG by&#160;
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/></a> 1.7.4 </small></address>
<div class="header">
<div class="headertitle">
<div class="title">Data Structure Index</div> </div>
</div><!--header-->
<div class="contents">
<div class="qindex"><a class="qindex" href="#letter_T">T</a></div>
<table style="margin: 10px; white-space: nowrap;" align="center" width="95%" border="0" cellspacing="0" cellpadding="0">
<tr><td rowspan="2" valign="bottom"><a name="letter_T"></a><table border="0" cellspacing="0" cellpadding="0"><tr><td><div class="ah">&#160;&#160;T&#160;&#160;</div></td></tr></table>
</td><td valign="top"><a class="el" href="structtjscalingfactor.html">tjscalingfactor</a>&#160;&#160;&#160;</td><td valign="top"><a class="el" href="structtjtransform.html">tjtransform</a>&#160;&#160;&#160;</td><td></td></tr>
<tr><td></td><td></td><td></td></tr>
<tr><td valign="top"><a class="el" href="structtjregion.html">tjregion</a>&#160;&#160;&#160;</td><td></td><td></td><td></td></tr>
<tr><td></td><td></td><td></td><td></td></tr>
</table>
<div class="qindex"><a class="qindex" href="#letter_T">T</a></div>
</div><!-- contents -->
<!-- start footer part -->
<hr class="footer"/><address class="footer"><small>
Generated by &#160;<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/>
</a> 1.8.3.1
</small></address>
</body>
</html>

BIN
doc/html/closed.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 126 B

After

Width:  |  Height:  |  Size: 132 B

3
doc/html/doxygen-extra.css Normal file
View File

@@ -0,0 +1,3 @@
code {
color: #4665A2;
}

609
doc/html/doxygen.css
View File

@@ -1,13 +1,12 @@
/* The standard CSS for doxygen */
/* The standard CSS for doxygen 1.8.3.1 */
body, table, div, p, dl {
font-family: Lucida Grande, Verdana, Geneva, Arial, sans-serif;
font-size: 12px;
font: 400 14px/19px Roboto,sans-serif;
}
/* @group Heading Levels */
h1 {
h1.groupheader {
font-size: 150%;
}
@@ -17,14 +16,34 @@ h1 {
margin: 10px 2px;
}
h2 {
font-size: 120%;
h2.groupheader {
border-bottom: 1px solid #879ECB;
color: #354C7B;
font-size: 150%;
font-weight: normal;
margin-top: 1.75em;
padding-top: 8px;
padding-bottom: 4px;
width: 100%;
}
h3 {
h3.groupheader {
font-size: 100%;
}
h1, h2, h3, h4, h5, h6 {
-webkit-transition: text-shadow 0.5s linear;
-moz-transition: text-shadow 0.5s linear;
-ms-transition: text-shadow 0.5s linear;
-o-transition: text-shadow 0.5s linear;
transition: text-shadow 0.5s linear;
margin-right: 15px;
}
h1.glow, h2.glow, h3.glow, h4.glow, h5.glow, h6.glow {
text-shadow: 0 0 15px cyan;
}
dt {
font-weight: bold;
}
@@ -72,8 +91,6 @@ div.qindex, div.navtab{
background-color: #EBEFF6;
border: 1px solid #A3B4D7;
text-align: center;
margin: 2px;
padding: 2px;
}
div.qindex, div.navpath {
@@ -123,12 +140,12 @@ a.el {
a.elRef {
}
a.code {
color: #4665A2;
a.code, a.code:visited {
color: #4665A2;
}
a.codeRef {
color: #4665A2;
a.codeRef, a.codeRef:visited {
color: #4665A2;
}
/* @end */
@@ -137,20 +154,72 @@ dl.el {
margin-left: -1cm;
}
.fragment {
font-family: monospace, fixed;
font-size: 105%;
pre.fragment {
border: 1px solid #C4CFE5;
background-color: #FBFCFD;
padding: 4px 6px;
margin: 4px 8px 4px 2px;
overflow: auto;
word-wrap: break-word;
font-size: 9pt;
line-height: 125%;
font-family: monospace, fixed;
font-size: 105%;
}
pre.fragment {
border: 1px solid #C4CFE5;
div.fragment {
padding: 4px;
margin: 4px;
background-color: #FBFCFD;
padding: 4px 6px;
margin: 4px 8px 4px 2px;
overflow: auto;
word-wrap: break-word;
font-size: 9pt;
line-height: 125%;
border: 1px solid #C4CFE5;
}
div.line {
font-family: monospace, fixed;
font-size: 13px;
min-height: 13px;
line-height: 1.0;
text-wrap: unrestricted;
white-space: -moz-pre-wrap; /* Moz */
white-space: -pre-wrap; /* Opera 4-6 */
white-space: -o-pre-wrap; /* Opera 7 */
white-space: pre-wrap; /* CSS3 */
word-wrap: break-word; /* IE 5.5+ */
text-indent: -53px;
padding-left: 53px;
padding-bottom: 0px;
margin: 0px;
-webkit-transition-property: background-color, box-shadow;
-webkit-transition-duration: 0.5s;
-moz-transition-property: background-color, box-shadow;
-moz-transition-duration: 0.5s;
-ms-transition-property: background-color, box-shadow;
-ms-transition-duration: 0.5s;
-o-transition-property: background-color, box-shadow;
-o-transition-duration: 0.5s;
transition-property: background-color, box-shadow;
transition-duration: 0.5s;
}
div.line.glow {
background-color: cyan;
box-shadow: 0 0 10px cyan;
}
span.lineno {
padding-right: 4px;
text-align: right;
border-right: 2px solid #0F0;
background-color: #E8E8E8;
white-space: pre;
}
span.lineno a {
background-color: #D8D8D8;
}
span.lineno a:hover {
background-color: #C8C8C8;
}
div.ah {
@@ -183,15 +252,15 @@ div.groupText {
}
body {
background: white;
background-color: white;
color: black;
margin: 0;
}
div.contents {
margin-top: 10px;
margin-left: 10px;
margin-right: 5px;
margin-left: 12px;
margin-right: 8px;
}
td.indexkey {
@@ -200,6 +269,8 @@ td.indexkey {
border: 1px solid #C4CFE5;
margin: 2px 0px 2px 0;
padding: 2px 10px;
white-space: nowrap;
vertical-align: top;
}
td.indexvalue {
@@ -292,6 +363,13 @@ span.vhdllogic {
color: #ff0000
}
blockquote {
background-color: #F7F8FB;
border-left: 2px solid #9CAFD4;
margin: 0 24px 0 4px;
padding: 0 12px 0 16px;
}
/* @end */
/*
@@ -345,6 +423,24 @@ table.memberdecls {
padding: 0px;
}
.memberdecls td, .fieldtable tr {
-webkit-transition-property: background-color, box-shadow;
-webkit-transition-duration: 0.5s;
-moz-transition-property: background-color, box-shadow;
-moz-transition-duration: 0.5s;
-ms-transition-property: background-color, box-shadow;
-ms-transition-duration: 0.5s;
-o-transition-property: background-color, box-shadow;
-o-transition-duration: 0.5s;
transition-property: background-color, box-shadow;
transition-duration: 0.5s;
}
.memberdecls td.glow, .fieldtable tr.glow {
background-color: cyan;
box-shadow: 0 0 15px cyan;
}
.mdescLeft, .mdescRight,
.memItemLeft, .memItemRight,
.memTemplItemLeft, .memTemplItemRight, .memTemplParams {
@@ -359,8 +455,11 @@ table.memberdecls {
color: #555;
}
.memItemLeft, .memItemRight, .memTemplParams {
border-top: 1px solid #C4CFE5;
.memSeparator {
border-bottom: 1px solid #DEE4F0;
line-height: 1px;
margin: 0px;
padding: 0px;
}
.memItemLeft, .memTemplItemLeft {
@@ -374,6 +473,7 @@ table.memberdecls {
.memTemplParams {
color: #4665A2;
white-space: nowrap;
font-size: 80%;
}
/* @end */
@@ -406,15 +506,29 @@ table.memberdecls {
padding: 0;
margin-bottom: 10px;
margin-right: 5px;
-webkit-transition: box-shadow 0.5s linear;
-moz-transition: box-shadow 0.5s linear;
-ms-transition: box-shadow 0.5s linear;
-o-transition: box-shadow 0.5s linear;
transition: box-shadow 0.5s linear;
display: table !important;
width: 100%;
}
.memitem.glow {
box-shadow: 0 0 15px cyan;
}
.memname {
white-space: nowrap;
font-weight: bold;
margin-left: 6px;
}
.memproto {
.memname td {
vertical-align: bottom;
}
.memproto, dl.reflist dt {
border-top: 1px solid #A8B8D9;
border-left: 1px solid #A8B8D9;
border-right: 1px solid #A8B8D9;
@@ -422,45 +536,55 @@ table.memberdecls {
color: #253555;
font-weight: bold;
text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9);
/* opera specific markup */
box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
border-top-right-radius: 8px;
border-top-left-radius: 8px;
/* firefox specific markup */
-moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px;
-moz-border-radius-topright: 8px;
-moz-border-radius-topleft: 8px;
/* webkit specific markup */
-webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
-webkit-border-top-right-radius: 8px;
-webkit-border-top-left-radius: 8px;
background-image:url('nav_f.png');
background-repeat:repeat-x;
background-color: #E2E8F2;
/* opera specific markup */
box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
border-top-right-radius: 4px;
border-top-left-radius: 4px;
/* firefox specific markup */
-moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px;
-moz-border-radius-topright: 4px;
-moz-border-radius-topleft: 4px;
/* webkit specific markup */
-webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
-webkit-border-top-right-radius: 4px;
-webkit-border-top-left-radius: 4px;
}
.memdoc {
.memdoc, dl.reflist dd {
border-bottom: 1px solid #A8B8D9;
border-left: 1px solid #A8B8D9;
border-right: 1px solid #A8B8D9;
padding: 2px 5px;
padding: 6px 10px 2px 10px;
background-color: #FBFCFD;
border-top-width: 0;
background-image:url('nav_g.png');
background-repeat:repeat-x;
background-color: #FFFFFF;
/* opera specific markup */
border-bottom-left-radius: 8px;
border-bottom-right-radius: 8px;
border-bottom-left-radius: 4px;
border-bottom-right-radius: 4px;
box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
/* firefox specific markup */
-moz-border-radius-bottomleft: 8px;
-moz-border-radius-bottomright: 8px;
-moz-border-radius-bottomleft: 4px;
-moz-border-radius-bottomright: 4px;
-moz-box-shadow: rgba(0, 0, 0, 0.15) 5px 5px 5px;
background-image: -moz-linear-gradient(center top, #FFFFFF 0%, #FFFFFF 60%, #F7F8FB 95%, #EEF1F7);
/* webkit specific markup */
-webkit-border-bottom-left-radius: 8px;
-webkit-border-bottom-right-radius: 8px;
-webkit-border-bottom-left-radius: 4px;
-webkit-border-bottom-right-radius: 4px;
-webkit-box-shadow: 5px 5px 5px rgba(0, 0, 0, 0.15);
background-image: -webkit-gradient(linear,center top,center bottom,from(#FFFFFF), color-stop(0.6,#FFFFFF), color-stop(0.60,#FFFFFF), color-stop(0.95,#F7F8FB), to(#EEF1F7));
}
dl.reflist dt {
padding: 5px;
}
dl.reflist dd {
margin: 0px 0px 10px 0px;
padding: 5px;
}
.paramkey {
@@ -478,9 +602,13 @@ table.memberdecls {
.paramname em {
font-style: normal;
}
.paramname code {
line-height: 14px;
}
.params, .retval, .exception, .tparams {
border-spacing: 6px 2px;
margin-left: 0px;
padding-left: 0px;
}
.params .paramname, .retval .paramname {
@@ -498,105 +626,116 @@ table.memberdecls {
vertical-align: top;
}
table.mlabels {
border-spacing: 0px;
}
td.mlabels-left {
width: 100%;
padding: 0px;
}
td.mlabels-right {
vertical-align: bottom;
padding: 0px;
white-space: nowrap;
}
span.mlabels {
margin-left: 8px;
}
span.mlabel {
background-color: #728DC1;
border-top:1px solid #5373B4;
border-left:1px solid #5373B4;
border-right:1px solid #C4CFE5;
border-bottom:1px solid #C4CFE5;
text-shadow: none;
color: white;
margin-right: 4px;
padding: 2px 3px;
border-radius: 3px;
font-size: 7pt;
white-space: nowrap;
vertical-align: middle;
}
/* @end */
/* @group Directory (tree) */
/* these are for tree view when not used as main index */
/* for the tree view */
.ftvtree {
font-family: sans-serif;
margin: 0px;
div.directory {
margin: 10px 0px;
border-top: 1px solid #A8B8D9;
border-bottom: 1px solid #A8B8D9;
width: 100%;
}
/* these are for tree view when used as main index */
.directory {
font-size: 9pt;
font-weight: bold;
margin: 5px;
.directory table {
border-collapse:collapse;
}
.directory h3 {
margin: 0px;
margin-top: 1em;
font-size: 11pt;
.directory td {
margin: 0px;
padding: 0px;
vertical-align: top;
}
/*
The following two styles can be used to replace the root node title
with an image of your choice. Simply uncomment the next two styles,
specify the name of your image and be sure to set 'height' to the
proper pixel height of your image.
*/
/*
.directory h3.swap {
height: 61px;
background-repeat: no-repeat;
background-image: url("yourimage.gif");
}
.directory h3.swap span {
display: none;
}
*/
.directory > h3 {
margin-top: 0;
.directory td.entry {
white-space: nowrap;
padding-right: 6px;
}
.directory p {
margin: 0px;
white-space: nowrap;
.directory td.entry a {
outline:none;
}
.directory div {
display: none;
margin: 0px;
.directory td.entry a img {
border: none;
}
.directory td.desc {
width: 100%;
padding-left: 6px;
padding-right: 6px;
padding-top: 3px;
border-left: 1px solid rgba(0,0,0,0.05);
}
.directory tr.even {
padding-left: 6px;
background-color: #F7F8FB;
}
.directory img {
vertical-align: -30%;
}
/* these are for tree view when not used as main index */
.directory-alt {
font-size: 100%;
font-weight: bold;
.directory .levels {
white-space: nowrap;
width: 100%;
text-align: right;
font-size: 9pt;
}
.directory-alt h3 {
margin: 0px;
margin-top: 1em;
font-size: 11pt;
.directory .levels span {
cursor: pointer;
padding-left: 2px;
padding-right: 2px;
color: #3D578C;
}
.directory-alt > h3 {
margin-top: 0;
}
.directory-alt p {
margin: 0px;
white-space: nowrap;
}
.directory-alt div {
display: none;
margin: 0px;
}
.directory-alt img {
vertical-align: -30%;
}
/* @end */
div.dynheader {
margin-top: 8px;
-webkit-touch-callout: none;
-webkit-user-select: none;
-khtml-user-select: none;
-moz-user-select: none;
-ms-user-select: none;
user-select: none;
}
address {
@@ -606,6 +745,8 @@ address {
table.doxtable {
border-collapse:collapse;
margin-top: 4px;
margin-bottom: 4px;
}
table.doxtable td, table.doxtable th {
@@ -619,9 +760,72 @@ table.doxtable th {
font-size: 110%;
padding-bottom: 4px;
padding-top: 5px;
text-align:left;
}
table.fieldtable {
/*width: 100%;*/
margin-bottom: 10px;
border: 1px solid #A8B8D9;
border-spacing: 0px;
-moz-border-radius: 4px;
-webkit-border-radius: 4px;
border-radius: 4px;
-moz-box-shadow: rgba(0, 0, 0, 0.15) 2px 2px 2px;
-webkit-box-shadow: 2px 2px 2px rgba(0, 0, 0, 0.15);
box-shadow: 2px 2px 2px rgba(0, 0, 0, 0.15);
}
.fieldtable td, .fieldtable th {
padding: 3px 7px 2px;
}
.fieldtable td.fieldtype, .fieldtable td.fieldname {
white-space: nowrap;
border-right: 1px solid #A8B8D9;
border-bottom: 1px solid #A8B8D9;
vertical-align: top;
}
.fieldtable td.fieldname {
padding-top: 5px;
}
.fieldtable td.fielddoc {
border-bottom: 1px solid #A8B8D9;
/*width: 100%;*/
}
.fieldtable td.fielddoc p:first-child {
margin-top: 2px;
}
.fieldtable td.fielddoc p:last-child {
margin-bottom: 2px;
}
.fieldtable tr:last-child td {
border-bottom: none;
}
.fieldtable th {
background-image:url('nav_f.png');
background-repeat:repeat-x;
background-color: #E2E8F2;
font-size: 90%;
color: #253555;
padding-bottom: 4px;
padding-top: 5px;
text-align:left;
-moz-border-radius-topleft: 4px;
-moz-border-radius-topright: 4px;
-webkit-border-top-left-radius: 4px;
-webkit-border-top-right-radius: 4px;
border-top-left-radius: 4px;
border-top-right-radius: 4px;
border-bottom: 1px solid #A8B8D9;
}
.tabsearch {
top: 0px;
left: 10px;
@@ -637,6 +841,7 @@ table.doxtable th {
font-size: 11px;
background-image:url('tab_b.png');
background-repeat:repeat-x;
background-position: 0 -5px;
height:30px;
line-height:30px;
color:#8AA0CC;
@@ -664,6 +869,10 @@ table.doxtable th {
display:block;
text-decoration: none;
outline: none;
color: #283A5D;
font-family: 'Lucida Grande',Geneva,Helvetica,Arial,sans-serif;
text-shadow: 0px 1px 1px rgba(255, 255, 255, 0.9);
text-decoration: none;
}
.navpath li.navelem a:hover
@@ -702,7 +911,6 @@ div.summary a
div.ingroups
{
font-size: 8pt;
padding-left: 5px;
width: 50%;
text-align: left;
}
@@ -731,47 +939,74 @@ dl
padding: 0 0 0 10px;
}
dl.note, dl.warning, dl.attention, dl.pre, dl.post, dl.invariant, dl.deprecated, dl.todo, dl.test, dl.bug
/* dl.note, dl.warning, dl.attention, dl.pre, dl.post, dl.invariant, dl.deprecated, dl.todo, dl.test, dl.bug */
dl.section
{
border-left:4px solid;
padding: 0 0 0 6px;
margin-left: 0px;
padding-left: 0px;
}
dl.note
{
margin-left:-7px;
padding-left: 3px;
border-left:4px solid;
border-color: #D0C000;
}
dl.warning, dl.attention
{
margin-left:-7px;
padding-left: 3px;
border-left:4px solid;
border-color: #FF0000;
}
dl.pre, dl.post, dl.invariant
{
margin-left:-7px;
padding-left: 3px;
border-left:4px solid;
border-color: #00D000;
}
dl.deprecated
{
margin-left:-7px;
padding-left: 3px;
border-left:4px solid;
border-color: #505050;
}
dl.todo
{
margin-left:-7px;
padding-left: 3px;
border-left:4px solid;
border-color: #00C0E0;
}
dl.test
{
margin-left:-7px;
padding-left: 3px;
border-left:4px solid;
border-color: #3030E0;
}
dl.bug
{
margin-left:-7px;
padding-left: 3px;
border-left:4px solid;
border-color: #C08050;
}
dl.section dd {
margin-bottom: 6px;
}
#projectlogo
{
text-align: center;
@@ -833,3 +1068,117 @@ dl.bug
font-weight: bold;
}
div.zoom
{
border: 1px solid #90A5CE;
}
dl.citelist {
margin-bottom:50px;
}
dl.citelist dt {
color:#334975;
float:left;
font-weight:bold;
margin-right:10px;
padding:5px;
}
dl.citelist dd {
margin:2px 0;
padding:5px 0;
}
div.toc {
padding: 14px 25px;
background-color: #F4F6FA;
border: 1px solid #D8DFEE;
border-radius: 7px 7px 7px 7px;
float: right;
height: auto;
margin: 0 20px 10px 10px;
width: 200px;
}
div.toc li {
background: url("bdwn.png") no-repeat scroll 0 5px transparent;
font: 10px/1.2 Verdana,DejaVu Sans,Geneva,sans-serif;
margin-top: 5px;
padding-left: 10px;
padding-top: 2px;
}
div.toc h3 {
font: bold 12px/1.2 Arial,FreeSans,sans-serif;
color: #4665A2;
border-bottom: 0 none;
margin: 0;
}
div.toc ul {
list-style: none outside none;
border: medium none;
padding: 0px;
}
div.toc li.level1 {
margin-left: 0px;
}
div.toc li.level2 {
margin-left: 15px;
}
div.toc li.level3 {
margin-left: 30px;
}
div.toc li.level4 {
margin-left: 45px;
}
.inherit_header {
font-weight: bold;
color: gray;
cursor: pointer;
-webkit-touch-callout: none;
-webkit-user-select: none;
-khtml-user-select: none;
-moz-user-select: none;
-ms-user-select: none;
user-select: none;
}
.inherit_header td {
padding: 6px 0px 2px 5px;
}
.inherit {
display: none;
}
tr.heading h2 {
margin-top: 12px;
margin-bottom: 4px;
}
@media print
{
#top { display: none; }
#side-nav { display: none; }
#nav-path { display: none; }
body { overflow:visible; }
h1, h2, h3, h4, h5, h6 { page-break-after: avoid; }
.summary { display: none; }
.memitem { page-break-inside: avoid; }
#doc-content
{
margin-left:0 !important;
height:auto !important;
width:auto !important;
overflow:inherit;
display:inline;
}
}

BIN
doc/html/doxygen.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 3.8 KiB

After

Width:  |  Height:  |  Size: 3.7 KiB

97
doc/html/dynsections.js Normal file
View File

@@ -0,0 +1,97 @@
function toggleVisibility(linkObj)
{
var base = $(linkObj).attr('id');
var summary = $('#'+base+'-summary');
var content = $('#'+base+'-content');
var trigger = $('#'+base+'-trigger');
var src=$(trigger).attr('src');
if (content.is(':visible')===true) {
content.hide();
summary.show();
$(linkObj).addClass('closed').removeClass('opened');
$(trigger).attr('src',src.substring(0,src.length-8)+'closed.png');
} else {
content.show();
summary.hide();
$(linkObj).removeClass('closed').addClass('opened');
$(trigger).attr('src',src.substring(0,src.length-10)+'open.png');
}
return false;
}
function updateStripes()
{
$('table.directory tr').
removeClass('even').filter(':visible:even').addClass('even');
}
function toggleLevel(level)
{
$('table.directory tr').each(function(){
var l = this.id.split('_').length-1;
var i = $('#img'+this.id.substring(3));
var a = $('#arr'+this.id.substring(3));
if (l<level+1) {
i.attr('src','ftv2folderopen.png');
a.attr('src','ftv2mnode.png');
$(this).show();
} else if (l==level+1) {
i.attr('src','ftv2folderclosed.png');
a.attr('src','ftv2pnode.png');
$(this).show();
} else {
$(this).hide();
}
});
updateStripes();
}
function toggleFolder(id)
{
//The clicked row
var currentRow = $('#row_'+id);
var currentRowImages = currentRow.find("img");
//All rows after the clicked row
var rows = currentRow.nextAll("tr");
//Only match elements AFTER this one (can't hide elements before)
var childRows = rows.filter(function() {
var re = new RegExp('^row_'+id+'\\d+_$', "i"); //only one sub
return this.id.match(re);
});
//First row is visible we are HIDING
if (childRows.filter(':first').is(':visible')===true) {
currentRowImages.filter("[id^=arr]").attr('src', 'ftv2pnode.png');
currentRowImages.filter("[id^=img]").attr('src', 'ftv2folderclosed.png');
rows.filter("[id^=row_"+id+"]").hide();
} else { //We are SHOWING
//All sub images
var childImages = childRows.find("img");
var childImg = childImages.filter("[id^=img]");
var childArr = childImages.filter("[id^=arr]");
currentRow.find("[id^=arr]").attr('src', 'ftv2mnode.png'); //open row
currentRow.find("[id^=img]").attr('src', 'ftv2folderopen.png'); //open row
childImg.attr('src','ftv2folderclosed.png'); //children closed
childArr.attr('src','ftv2pnode.png'); //children closed
childRows.show(); //show all children
}
updateStripes();
}
function toggleInherit(id)
{
var rows = $('tr.inherit.'+id);
var img = $('tr.inherit_header.'+id+' img');
var src = $(img).attr('src');
if (rows.filter(':first').is(':visible')===true) {
rows.css('display','none');
$(img).attr('src',src.substring(0,src.length-8)+'closed.png');
} else {
rows.css('display','table-row'); // using show() causes jump in firefox
$(img).attr('src',src.substring(0,src.length-10)+'open.png');
}
}

BIN
doc/html/ftv2blank.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 86 B

BIN
doc/html/ftv2cl.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 453 B

BIN
doc/html/ftv2doc.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 746 B

BIN
doc/html/ftv2folderclosed.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 616 B

BIN
doc/html/ftv2folderopen.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 597 B

BIN
doc/html/ftv2lastnode.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 86 B

BIN
doc/html/ftv2link.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 746 B

BIN
doc/html/ftv2mlastnode.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 246 B

BIN
doc/html/ftv2mnode.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 246 B

BIN
doc/html/ftv2mo.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 403 B

BIN
doc/html/ftv2node.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 86 B

BIN
doc/html/ftv2ns.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 388 B

BIN
doc/html/ftv2plastnode.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 229 B

BIN
doc/html/ftv2pnode.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 229 B

BIN
doc/html/ftv2splitbar.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 314 B

BIN
doc/html/ftv2vertline.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 86 B

68
doc/html/functions.html
View File

@@ -2,35 +2,46 @@
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=9"/>
<meta name="generator" content="Doxygen 1.8.3.1"/>
<title>TurboJPEG: Data Fields</title>
<link href="tabs.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript" src="dynsections.js"></script>
<link href="search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="search/search.js"></script>
<link href="doxygen.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript">
$(document).ready(function() { searchBox.OnSelectItem(0); });
</script>
<link href="doxygen.css" rel="stylesheet" type="text/css" />
<link href="doxygen-extra.css" rel="stylesheet" type="text/css"/>
</head>
<body onload='searchBox.OnSelectItem(0);'>
<!-- Generated by Doxygen 1.7.4 -->
<script type="text/javascript"><!--
var searchBox = new SearchBox("searchBox", "search",false,'Search');
--></script>
<div id="top">
<body>
<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td style="padding-left: 0.5em;">
<div id="projectname">TurboJPEG&#160;<span id="projectnumber">1.2.1</span></div>
<div id="projectname">TurboJPEG
&#160;<span id="projectnumber">1.5</span>
</div>
</td>
</tr>
</tbody>
</table>
</div>
<!-- end header part -->
<!-- Generated by Doxygen 1.8.3.1 -->
<script type="text/javascript">
var searchBox = new SearchBox("searchBox", "search",false,'Search');
</script>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li><a href="index.html"><span>Main&#160;Page</span></a></li>
<li><a href="modules.html"><span>Modules</span></a></li>
<li class="current"><a href="annotated.html"><span>Data&#160;Structures</span></a></li>
<li id="searchli">
<li>
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="search/mag_sel.png"
@@ -61,7 +72,21 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
<li><a href="functions_vars.html"><span>Variables</span></a></li>
</ul>
</div>
</div><!-- top -->
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Functions</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(3)"><span class="SelectionMark">&#160;</span>Variables</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(4)"><span class="SelectionMark">&#160;</span>Typedefs</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(5)"><span class="SelectionMark">&#160;</span>Enumerations</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(6)"><span class="SelectionMark">&#160;</span>Enumerator</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(7)"><span class="SelectionMark">&#160;</span>Groups</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
<iframe src="javascript:void(0)" frameborder="0"
name="MSearchResults" id="MSearchResults">
</iframe>
</div>
<div class="contents">
<div class="textblock">Here is a list of all documented struct and union fields with links to the struct/union documentation for each field:</div><ul>
<li>customFilter
@@ -98,23 +123,12 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
: <a class="el" href="structtjregion.html#a7b3e0c24cfe87acc80e334cafdcf22c2">tjregion</a>
</li>
</ul>
</div>
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Variables</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
<iframe src="javascript:void(0)" frameborder="0"
name="MSearchResults" id="MSearchResults">
</iframe>
</div>
<hr class="footer"/><address class="footer"><small>Generated on Fri Jun 29 2012 18:34:09 for TurboJPEG by&#160;
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/></a> 1.7.4 </small></address>
</div><!-- contents -->
<!-- start footer part -->
<hr class="footer"/><address class="footer"><small>
Generated by &#160;<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/>
</a> 1.8.3.1
</small></address>
</body>
</html>

68
doc/html/functions_vars.html
View File

@@ -2,35 +2,46 @@
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=9"/>
<meta name="generator" content="Doxygen 1.8.3.1"/>
<title>TurboJPEG: Data Fields - Variables</title>
<link href="tabs.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript" src="dynsections.js"></script>
<link href="search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="search/search.js"></script>
<link href="doxygen.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript">
$(document).ready(function() { searchBox.OnSelectItem(0); });
</script>
<link href="doxygen.css" rel="stylesheet" type="text/css" />
<link href="doxygen-extra.css" rel="stylesheet" type="text/css"/>
</head>
<body onload='searchBox.OnSelectItem(0);'>
<!-- Generated by Doxygen 1.7.4 -->
<script type="text/javascript"><!--
var searchBox = new SearchBox("searchBox", "search",false,'Search');
--></script>
<div id="top">
<body>
<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td style="padding-left: 0.5em;">
<div id="projectname">TurboJPEG&#160;<span id="projectnumber">1.2.1</span></div>
<div id="projectname">TurboJPEG
&#160;<span id="projectnumber">1.5</span>
</div>
</td>
</tr>
</tbody>
</table>
</div>
<!-- end header part -->
<!-- Generated by Doxygen 1.8.3.1 -->
<script type="text/javascript">
var searchBox = new SearchBox("searchBox", "search",false,'Search');
</script>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li><a href="index.html"><span>Main&#160;Page</span></a></li>
<li><a href="modules.html"><span>Modules</span></a></li>
<li class="current"><a href="annotated.html"><span>Data&#160;Structures</span></a></li>
<li id="searchli">
<li>
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="search/mag_sel.png"
@@ -61,7 +72,21 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
<li class="current"><a href="functions_vars.html"><span>Variables</span></a></li>
</ul>
</div>
</div><!-- top -->
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Functions</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(3)"><span class="SelectionMark">&#160;</span>Variables</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(4)"><span class="SelectionMark">&#160;</span>Typedefs</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(5)"><span class="SelectionMark">&#160;</span>Enumerations</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(6)"><span class="SelectionMark">&#160;</span>Enumerator</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(7)"><span class="SelectionMark">&#160;</span>Groups</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
<iframe src="javascript:void(0)" frameborder="0"
name="MSearchResults" id="MSearchResults">
</iframe>
</div>
<div class="contents">
&#160;<ul>
<li>customFilter
@@ -98,23 +123,12 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
: <a class="el" href="structtjregion.html#a7b3e0c24cfe87acc80e334cafdcf22c2">tjregion</a>
</li>
</ul>
</div>
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Variables</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
<iframe src="javascript:void(0)" frameborder="0"
name="MSearchResults" id="MSearchResults">
</iframe>
</div>
<hr class="footer"/><address class="footer"><small>Generated on Fri Jun 29 2012 18:34:09 for TurboJPEG by&#160;
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/></a> 1.7.4 </small></address>
</div><!-- contents -->
<!-- start footer part -->
<hr class="footer"/><address class="footer"><small>
Generated by &#160;<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/>
</a> 1.8.3.1
</small></address>
</body>
</html>

1811
doc/html/group___turbo_j_p_e_g.html
View File

File diff suppressed because it is too large Load Diff

54
doc/html/index.html
View File

@@ -2,35 +2,46 @@
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=9"/>
<meta name="generator" content="Doxygen 1.8.3.1"/>
<title>TurboJPEG: Main Page</title>
<link href="tabs.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript" src="dynsections.js"></script>
<link href="search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="search/search.js"></script>
<link href="doxygen.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript">
$(document).ready(function() { searchBox.OnSelectItem(0); });
</script>
<link href="doxygen.css" rel="stylesheet" type="text/css" />
<link href="doxygen-extra.css" rel="stylesheet" type="text/css"/>
</head>
<body onload='searchBox.OnSelectItem(0);'>
<!-- Generated by Doxygen 1.7.4 -->
<script type="text/javascript"><!--
var searchBox = new SearchBox("searchBox", "search",false,'Search');
--></script>
<div id="top">
<body>
<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td style="padding-left: 0.5em;">
<div id="projectname">TurboJPEG&#160;<span id="projectnumber">1.2.1</span></div>
<div id="projectname">TurboJPEG
&#160;<span id="projectnumber">1.5</span>
</div>
</td>
</tr>
</tbody>
</table>
</div>
<!-- end header part -->
<!-- Generated by Doxygen 1.8.3.1 -->
<script type="text/javascript">
var searchBox = new SearchBox("searchBox", "search",false,'Search');
</script>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li class="current"><a href="index.html"><span>Main&#160;Page</span></a></li>
<li><a href="modules.html"><span>Modules</span></a></li>
<li><a href="annotated.html"><span>Data&#160;Structures</span></a></li>
<li id="searchli">
<li>
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="search/mag_sel.png"
@@ -48,19 +59,13 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
</li>
</ul>
</div>
</div>
<div class="header">
<div class="headertitle">
<div class="title">TurboJPEG Documentation</div> </div>
</div>
<div class="contents">
</div>
</div><!-- top -->
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Variables</a></div>
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Functions</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(3)"><span class="SelectionMark">&#160;</span>Variables</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(4)"><span class="SelectionMark">&#160;</span>Typedefs</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(5)"><span class="SelectionMark">&#160;</span>Enumerations</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(6)"><span class="SelectionMark">&#160;</span>Enumerator</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(7)"><span class="SelectionMark">&#160;</span>Groups</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
@@ -69,8 +74,17 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
</iframe>
</div>
<hr class="footer"/><address class="footer"><small>Generated on Fri Jun 29 2012 18:34:09 for TurboJPEG by&#160;
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/></a> 1.7.4 </small></address>
<div class="header">
<div class="headertitle">
<div class="title">TurboJPEG Documentation</div> </div>
</div><!--header-->
<div class="contents">
</div><!-- contents -->
<!-- start footer part -->
<hr class="footer"/><address class="footer"><small>
Generated by &#160;<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/>
</a> 1.8.3.1
</small></address>
</body>
</html>

112
doc/html/installdox
View File

@@ -1,112 +0,0 @@
#!/usr/bin/perl
%subst = ( );
$quiet = 0;
while ( @ARGV ) {
$_ = shift @ARGV;
if ( s/^-// ) {
if ( /^l(.*)/ ) {
$v = ($1 eq "") ? shift @ARGV : $1;
($v =~ /\/$/) || ($v .= "/");
$_ = $v;
if ( /(.+)\@(.+)/ ) {
if ( exists $subst{$1} ) {
$subst{$1} = $2;
} else {
print STDERR "Unknown tag file $1 given with option -l\n";
&usage();
}
} else {
print STDERR "Argument $_ is invalid for option -l\n";
&usage();
}
}
elsif ( /^q/ ) {
$quiet = 1;
}
elsif ( /^\?|^h/ ) {
&usage();
}
else {
print STDERR "Illegal option -$_\n";
&usage();
}
}
else {
push (@files, $_ );
}
}
foreach $sub (keys %subst)
{
if ( $subst{$sub} eq "" )
{
print STDERR "No substitute given for tag file `$sub'\n";
&usage();
}
elsif ( ! $quiet && $sub ne "_doc" && $sub ne "_cgi" )
{
print "Substituting $subst{$sub} for each occurrence of tag file $sub\n";
}
}
if ( ! @files ) {
if (opendir(D,".")) {
foreach $file ( readdir(D) ) {
$match = ".html";
next if ( $file =~ /^\.\.?$/ );
($file =~ /$match/) && (push @files, $file);
($file =~ /\.svg/) && (push @files, $file);
($file =~ "navtree.js") && (push @files, $file);
}
closedir(D);
}
}
if ( ! @files ) {
print STDERR "Warning: No input files given and none found!\n";
}
foreach $f (@files)
{
if ( ! $quiet ) {
print "Editing: $f...\n";
}
$oldf = $f;
$f .= ".bak";
unless (rename $oldf,$f) {
print STDERR "Error: cannot rename file $oldf\n";
exit 1;
}
if (open(F,"<$f")) {
unless (open(G,">$oldf")) {
print STDERR "Error: opening file $oldf for writing\n";
exit 1;
}
if ($oldf ne "tree.js") {
while (<F>) {
s/doxygen\=\"([^ \"\:\t\>\<]*)\:([^ \"\t\>\<]*)\" (xlink:href|href|src)=\"\2/doxygen\=\"$1:$subst{$1}\" \3=\"$subst{$1}/g;
print G "$_";
}
}
else {
while (<F>) {
s/\"([^ \"\:\t\>\<]*)\:([^ \"\t\>\<]*)\", \"\2/\"$1:$subst{$1}\" ,\"$subst{$1}/g;
print G "$_";
}
}
}
else {
print STDERR "Warning file $f does not exist\n";
}
unlink $f;
}
sub usage {
print STDERR "Usage: installdox [options] [html-file [html-file ...]]\n";
print STDERR "Options:\n";
print STDERR " -l tagfile\@linkName tag file + URL or directory \n";
print STDERR " -q Quiet mode\n\n";
exit 1;
}

62
doc/html/jquery.js vendored
View File

File diff suppressed because one or more lines are too long

62
doc/html/modules.html
View File

@@ -2,35 +2,46 @@
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta http-equiv="X-UA-Compatible" content="IE=9"/>
<meta name="generator" content="Doxygen 1.8.3.1"/>
<title>TurboJPEG: Modules</title>
<link href="tabs.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="jquery.js"></script>
<script type="text/javascript" src="dynsections.js"></script>
<link href="search/search.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript" src="search/search.js"></script>
<link href="doxygen.css" rel="stylesheet" type="text/css"/>
<script type="text/javascript">
$(document).ready(function() { searchBox.OnSelectItem(0); });
</script>
<link href="doxygen.css" rel="stylesheet" type="text/css" />
<link href="doxygen-extra.css" rel="stylesheet" type="text/css"/>
</head>
<body onload='searchBox.OnSelectItem(0);'>
<!-- Generated by Doxygen 1.7.4 -->
<script type="text/javascript"><!--
var searchBox = new SearchBox("searchBox", "search",false,'Search');
--></script>
<div id="top">
<body>
<div id="top"><!-- do not remove this div, it is closed by doxygen! -->
<div id="titlearea">
<table cellspacing="0" cellpadding="0">
<tbody>
<tr style="height: 56px;">
<td style="padding-left: 0.5em;">
<div id="projectname">TurboJPEG&#160;<span id="projectnumber">1.2.1</span></div>
<div id="projectname">TurboJPEG
&#160;<span id="projectnumber">1.5</span>
</div>
</td>
</tr>
</tbody>
</table>
</div>
<!-- end header part -->
<!-- Generated by Doxygen 1.8.3.1 -->
<script type="text/javascript">
var searchBox = new SearchBox("searchBox", "search",false,'Search');
</script>
<div id="navrow1" class="tabs">
<ul class="tablist">
<li><a href="index.html"><span>Main&#160;Page</span></a></li>
<li class="current"><a href="modules.html"><span>Modules</span></a></li>
<li><a href="annotated.html"><span>Data&#160;Structures</span></a></li>
<li id="searchli">
<li>
<div id="MSearchBox" class="MSearchBoxInactive">
<span class="left">
<img id="MSearchSelect" src="search/mag_sel.png"
@@ -48,22 +59,13 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
</li>
</ul>
</div>
</div>
<div class="header">
<div class="headertitle">
<div class="title">Modules</div> </div>
</div>
<div class="contents">
<div class="textblock">Here is a list of all modules:</div><ul>
<li><a class="el" href="group___turbo_j_p_e_g.html">TurboJPEG</a></li>
</ul>
</div>
</div><!-- top -->
<!-- window showing the filter options -->
<div id="MSearchSelectWindow"
onmouseover="return searchBox.OnSearchSelectShow()"
onmouseout="return searchBox.OnSearchSelectHide()"
onkeydown="return searchBox.OnSearchSelectKey(event)">
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Variables</a></div>
<a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(0)"><span class="SelectionMark">&#160;</span>All</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(1)"><span class="SelectionMark">&#160;</span>Data Structures</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(2)"><span class="SelectionMark">&#160;</span>Functions</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(3)"><span class="SelectionMark">&#160;</span>Variables</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(4)"><span class="SelectionMark">&#160;</span>Typedefs</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(5)"><span class="SelectionMark">&#160;</span>Enumerations</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(6)"><span class="SelectionMark">&#160;</span>Enumerator</a><a class="SelectItem" href="javascript:void(0)" onclick="searchBox.OnSelectItem(7)"><span class="SelectionMark">&#160;</span>Groups</a></div>
<!-- iframe showing the search results (closed by default) -->
<div id="MSearchResultsWindow">
@@ -72,8 +74,22 @@ var searchBox = new SearchBox("searchBox", "search",false,'Search');
</iframe>
</div>
<hr class="footer"/><address class="footer"><small>Generated on Fri Jun 29 2012 18:34:09 for TurboJPEG by&#160;
<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/></a> 1.7.4 </small></address>
<div class="header">
<div class="headertitle">
<div class="title">Modules</div> </div>
</div><!--header-->
<div class="contents">
<div class="textblock">Here is a list of all modules:</div><div class="directory">
<table class="directory">
<tr id="row_0_" class="even"><td class="entry"><img src="ftv2lastnode.png" alt="\" width="16" height="22" /><a class="el" href="group___turbo_j_p_e_g.html" target="_self">TurboJPEG</a></td><td class="desc">TurboJPEG API</td></tr>
</table>
</div><!-- directory -->
</div><!-- contents -->
<!-- start footer part -->
<hr class="footer"/><address class="footer"><small>
Generated by &#160;<a href="http://www.doxygen.org/index.html">
<img class="footer" src="doxygen.png" alt="doxygen"/>
</a> 1.8.3.1
</small></address>
</body>
</html>

BIN
doc/html/nav_f.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 159 B

After

Width:  |  Height:  |  Size: 153 B

BIN
doc/html/nav_g.png Normal file
View File

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 95 B

BIN
doc/html/nav_h.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 97 B

After

Width:  |  Height:  |  Size: 98 B

BIN
doc/html/open.png
View File

Binary file not shown.
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 118 B

After

Width:  |  Height:  |  Size: 123 B

12
doc/html/search/all_63.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_63.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_customfilter">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjtransform.html#a43ee1bcdd2a8d7249a756774f78793c1" target="_parent">customFilter</a>
<span class="SRScope">tjtransform</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/all_63.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['customfilter',['customFilter',['../structtjtransform.html#a43ee1bcdd2a8d7249a756774f78793c1',1,'tjtransform']]]
];

18
doc/html/search/all_64.html
View File

@@ -1,24 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_64.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_data">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjtransform.html#a688fe8f1a8ecc12a538d9e561cf338e3" target="_parent">data</a>
<span class="SRScope">tjtransform</span>
</div>
</div>
<div class="SRResult" id="SR_denom">
<div class="SREntry">
<a id="Item1" onkeydown="return searchResults.Nav(event,1)" onkeypress="return searchResults.Nav(event,1)" onkeyup="return searchResults.Nav(event,1)" class="SRSymbol" href="../structtjscalingfactor.html#aefbcdf3e9e62274b2d312c695f133ce3" target="_parent">denom</a>
<span class="SRScope">tjscalingfactor</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

5
doc/html/search/all_64.js Normal file
View File

@@ -0,0 +1,5 @@
var searchData=
[
['data',['data',['../structtjtransform.html#a688fe8f1a8ecc12a538d9e561cf338e3',1,'tjtransform']]],
['denom',['denom',['../structtjscalingfactor.html#aefbcdf3e9e62274b2d312c695f133ce3',1,'tjscalingfactor']]]
];

12
doc/html/search/all_68.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_68.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_h">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjregion.html#aecefc45a26f4d8b60dd4d825c1710115" target="_parent">h</a>
<span class="SRScope">tjregion</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/all_68.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['h',['h',['../structtjregion.html#aecefc45a26f4d8b60dd4d825c1710115',1,'tjregion']]]
];

12
doc/html/search/all_6e.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_6e.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_num">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjscalingfactor.html#a9b011e57f981ee23083e2c1aa5e640ec" target="_parent">num</a>
<span class="SRScope">tjscalingfactor</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/all_6e.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['num',['num',['../structtjscalingfactor.html#a9b011e57f981ee23083e2c1aa5e640ec',1,'tjscalingfactor']]]
];

18
doc/html/search/all_6f.html
View File

@@ -1,24 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_6f.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_op">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjtransform.html#a2525aab4ba6978a1c273f74fef50e498" target="_parent">op</a>
<span class="SRScope">tjtransform</span>
</div>
</div>
<div class="SRResult" id="SR_options">
<div class="SREntry">
<a id="Item1" onkeydown="return searchResults.Nav(event,1)" onkeypress="return searchResults.Nav(event,1)" onkeyup="return searchResults.Nav(event,1)" class="SRSymbol" href="../structtjtransform.html#ac0e74655baa4402209a21e1ae481c8f6" target="_parent">options</a>
<span class="SRScope">tjtransform</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

5
doc/html/search/all_6f.js Normal file
View File

@@ -0,0 +1,5 @@
var searchData=
[
['op',['op',['../structtjtransform.html#a2525aab4ba6978a1c273f74fef50e498',1,'tjtransform']]],
['options',['options',['../structtjtransform.html#ac0e74655baa4402209a21e1ae481c8f6',1,'tjtransform']]]
];

12
doc/html/search/all_72.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_72.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_r">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjtransform.html#ac324e5e442abec8a961e5bf219db12cf" target="_parent">r</a>
<span class="SRScope">tjtransform</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/all_72.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['r',['r',['../structtjtransform.html#ac324e5e442abec8a961e5bf219db12cf',1,'tjtransform']]]
];

21
doc/html/search/all_74.html
View File

@@ -1,27 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_74.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_tjregion">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjregion.html" target="_parent">tjregion</a>
</div>
</div>
<div class="SRResult" id="SR_tjscalingfactor">
<div class="SREntry">
<a id="Item1" onkeydown="return searchResults.Nav(event,1)" onkeypress="return searchResults.Nav(event,1)" onkeyup="return searchResults.Nav(event,1)" class="SRSymbol" href="../structtjscalingfactor.html" target="_parent">tjscalingfactor</a>
</div>
</div>
<div class="SRResult" id="SR_tjtransform">
<div class="SREntry">
<a id="Item2" onkeydown="return searchResults.Nav(event,2)" onkeypress="return searchResults.Nav(event,2)" onkeyup="return searchResults.Nav(event,2)" class="SRSymbol" href="../structtjtransform.html" target="_parent">tjtransform</a>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

89
doc/html/search/all_74.js Normal file
View File

@@ -0,0 +1,89 @@
var searchData=
[
['tj_5fnumcs',['TJ_NUMCS',['../group___turbo_j_p_e_g.html#ga39f57a6fb02d9cf32e7b6890099b5a71',1,'turbojpeg.h']]],
['tj_5fnumpf',['TJ_NUMPF',['../group___turbo_j_p_e_g.html#ga7010a4402f54a45ba822ad8675a4655e',1,'turbojpeg.h']]],
['tj_5fnumsamp',['TJ_NUMSAMP',['../group___turbo_j_p_e_g.html#ga5ef3d169162ce77ce348e292a0b7477c',1,'turbojpeg.h']]],
['tj_5fnumxop',['TJ_NUMXOP',['../group___turbo_j_p_e_g.html#ga0f6dbd18adf38b7d46ac547f0f4d562c',1,'turbojpeg.h']]],
['tjalloc',['tjAlloc',['../group___turbo_j_p_e_g.html#ga5c9234bda6d993cdaffdd89bf81a00ff',1,'turbojpeg.h']]],
['tjblueoffset',['tjBlueOffset',['../group___turbo_j_p_e_g.html#ga84e2e35d3f08025f976ec1ec53693dea',1,'turbojpeg.h']]],
['tjbufsize',['tjBufSize',['../group___turbo_j_p_e_g.html#gaccc5bca7f12fcdcc302e6e1c6d4b311b',1,'turbojpeg.h']]],
['tjbufsizeyuv2',['tjBufSizeYUV2',['../group___turbo_j_p_e_g.html#gaf451664a62c1f6c7cc5a6401f32908c9',1,'turbojpeg.h']]],
['tjcompress2',['tjCompress2',['../group___turbo_j_p_e_g.html#gaf38f2ed44bdc88e730e08b632fa6e88e',1,'turbojpeg.h']]],
['tjcompressfromyuv',['tjCompressFromYUV',['../group___turbo_j_p_e_g.html#ga6f6de375d6ec0020faba627e37e5a060',1,'turbojpeg.h']]],
['tjcompressfromyuvplanes',['tjCompressFromYUVPlanes',['../group___turbo_j_p_e_g.html#ga0b84c682d8accf097d7a743c965d3464',1,'turbojpeg.h']]],
['tjcs',['TJCS',['../group___turbo_j_p_e_g.html#ga4f83ad3368e0e29d1957be0efa7c3720',1,'turbojpeg.h']]],
['tjcs_5fcmyk',['TJCS_CMYK',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a6c8b636152ac8195b869587db315ee53',1,'turbojpeg.h']]],
['tjcs_5fgray',['TJCS_GRAY',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720ab3e7d6a87f695e45b81c1b5262b5a50a',1,'turbojpeg.h']]],
['tjcs_5frgb',['TJCS_RGB',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a677cb7ccb85c4038ac41964a2e09e555',1,'turbojpeg.h']]],
['tjcs_5fycbcr',['TJCS_YCbCr',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a7389b8f65bb387ffedce3efd0d78ec75',1,'turbojpeg.h']]],
['tjcs_5fycck',['TJCS_YCCK',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a53839e0fe867b76b58d16b0a1a7c598e',1,'turbojpeg.h']]],
['tjdecodeyuv',['tjDecodeYUV',['../group___turbo_j_p_e_g.html#ga077c61027b875afecd5a1613bf18b3c1',1,'turbojpeg.h']]],
['tjdecodeyuvplanes',['tjDecodeYUVPlanes',['../group___turbo_j_p_e_g.html#gaf42f19b7a496eb18bdc84fe61ee6d3e2',1,'turbojpeg.h']]],
['tjdecompress2',['tjDecompress2',['../group___turbo_j_p_e_g.html#gad8026a417e16a76313bc0a6c9e8b2ba2',1,'turbojpeg.h']]],
['tjdecompressheader3',['tjDecompressHeader3',['../group___turbo_j_p_e_g.html#ga3fced455e504e8ff4fbad28ba94a3020',1,'turbojpeg.h']]],
['tjdecompresstoyuv2',['tjDecompressToYUV2',['../group___turbo_j_p_e_g.html#ga39e08906528db5a764670ea48d344b09',1,'turbojpeg.h']]],
['tjdecompresstoyuvplanes',['tjDecompressToYUVPlanes',['../group___turbo_j_p_e_g.html#ga38d0ef90692663b3ffb5b16da2541512',1,'turbojpeg.h']]],
['tjdestroy',['tjDestroy',['../group___turbo_j_p_e_g.html#ga674adee917b95ad4a896f1ba39e12540',1,'turbojpeg.h']]],
['tjencodeyuv3',['tjEncodeYUV3',['../group___turbo_j_p_e_g.html#gaabe05acd734990053ad1294b5ef239aa',1,'turbojpeg.h']]],
['tjencodeyuvplanes',['tjEncodeYUVPlanes',['../group___turbo_j_p_e_g.html#ga8a65ed3bd12df57c219d46afbc9008f1',1,'turbojpeg.h']]],
['tjflag_5faccuratedct',['TJFLAG_ACCURATEDCT',['../group___turbo_j_p_e_g.html#gacb233cfd722d66d1ccbf48a7de81f0e0',1,'turbojpeg.h']]],
['tjflag_5fbottomup',['TJFLAG_BOTTOMUP',['../group___turbo_j_p_e_g.html#ga72ecf4ebe6eb702d3c6f5ca27455e1ec',1,'turbojpeg.h']]],
['tjflag_5ffastdct',['TJFLAG_FASTDCT',['../group___turbo_j_p_e_g.html#gaabce235db80d3f698b27f36cbd453da2',1,'turbojpeg.h']]],
['tjflag_5ffastupsample',['TJFLAG_FASTUPSAMPLE',['../group___turbo_j_p_e_g.html#ga4ee4506c81177a06f77e2504a22efd2d',1,'turbojpeg.h']]],
['tjflag_5fnorealloc',['TJFLAG_NOREALLOC',['../group___turbo_j_p_e_g.html#ga8808d403c68b62aaa58a4c1e58e98963',1,'turbojpeg.h']]],
['tjfree',['tjFree',['../group___turbo_j_p_e_g.html#ga8c4a1231dc06a450514c835f6471f137',1,'turbojpeg.h']]],
['tjgeterrorstr',['tjGetErrorStr',['../group___turbo_j_p_e_g.html#ga9af79c908ec131b1ae8d52fe40375abf',1,'turbojpeg.h']]],
['tjgetscalingfactors',['tjGetScalingFactors',['../group___turbo_j_p_e_g.html#ga6449044b9af402999ccf52f401333be8',1,'turbojpeg.h']]],
['tjgreenoffset',['tjGreenOffset',['../group___turbo_j_p_e_g.html#ga82d6e35da441112a411da41923c0ba2f',1,'turbojpeg.h']]],
['tjhandle',['tjhandle',['../group___turbo_j_p_e_g.html#ga758d2634ecb4949de7815cba621f5763',1,'turbojpeg.h']]],
['tjinitcompress',['tjInitCompress',['../group___turbo_j_p_e_g.html#ga3d10c47fbe4a2489a2b30c931551d01a',1,'turbojpeg.h']]],
['tjinitdecompress',['tjInitDecompress',['../group___turbo_j_p_e_g.html#gae5408179d041e2a2f7199c8283cf649e',1,'turbojpeg.h']]],
['tjinittransform',['tjInitTransform',['../group___turbo_j_p_e_g.html#ga3155b775bfbac9dbba869b95a0367902',1,'turbojpeg.h']]],
['tjmcuheight',['tjMCUHeight',['../group___turbo_j_p_e_g.html#gabd247bb9fecb393eca57366feb8327bf',1,'turbojpeg.h']]],
['tjmcuwidth',['tjMCUWidth',['../group___turbo_j_p_e_g.html#ga9e61e7cd47a15a173283ba94e781308c',1,'turbojpeg.h']]],
['tjpad',['TJPAD',['../group___turbo_j_p_e_g.html#ga0aba955473315e405295d978f0c16511',1,'turbojpeg.h']]],
['tjpf',['TJPF',['../group___turbo_j_p_e_g.html#gac916144e26c3817ac514e64ae5d12e2a',1,'turbojpeg.h']]],
['tjpf_5fabgr',['TJPF_ABGR',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa1ba1a7f1631dbeaa49a0a85fc4a40081',1,'turbojpeg.h']]],
['tjpf_5fargb',['TJPF_ARGB',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aae8f846ed9d9de99b6e1dfe448848765c',1,'turbojpeg.h']]],
['tjpf_5fbgr',['TJPF_BGR',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aab10624437fb8ef495a0b153e65749839',1,'turbojpeg.h']]],
['tjpf_5fbgra',['TJPF_BGRA',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aac037ff1845cf9b74bb81a3659c2b9fb4',1,'turbojpeg.h']]],
['tjpf_5fbgrx',['TJPF_BGRX',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa2a1fbf569ca79897eae886e3376ca4c8',1,'turbojpeg.h']]],
['tjpf_5fcmyk',['TJPF_CMYK',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa7f5100ec44c91994e243f1cf55553f8b',1,'turbojpeg.h']]],
['tjpf_5fgray',['TJPF_GRAY',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa5431b54b015337705f13118073711a1a',1,'turbojpeg.h']]],
['tjpf_5frgb',['TJPF_RGB',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa7ce93230bff449518ce387c17e6ed37c',1,'turbojpeg.h']]],
['tjpf_5frgba',['TJPF_RGBA',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa88d2e88fab67f6503cf972e14851cc12',1,'turbojpeg.h']]],
['tjpf_5frgbx',['TJPF_RGBX',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa83973bebb7e2dc6fa8bae89ff3f42e01',1,'turbojpeg.h']]],
['tjpf_5fxbgr',['TJPF_XBGR',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aaf6603b27147de47e212e75dac027b2af',1,'turbojpeg.h']]],
['tjpf_5fxrgb',['TJPF_XRGB',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aadae996905efcfa3b42a0bb3bea7f9d84',1,'turbojpeg.h']]],
['tjpixelsize',['tjPixelSize',['../group___turbo_j_p_e_g.html#gad77cf8fe5b2bfd3cb3f53098146abb4c',1,'turbojpeg.h']]],
['tjplaneheight',['tjPlaneHeight',['../group___turbo_j_p_e_g.html#ga1a209696c6a80748f20e134b3c64789f',1,'turbojpeg.h']]],
['tjplanesizeyuv',['tjPlaneSizeYUV',['../group___turbo_j_p_e_g.html#ga6f98d977bfa9d167c97172e876ba61e2',1,'turbojpeg.h']]],
['tjplanewidth',['tjPlaneWidth',['../group___turbo_j_p_e_g.html#ga63fb66bb1e36c74008c4634360becbb1',1,'turbojpeg.h']]],
['tjredoffset',['tjRedOffset',['../group___turbo_j_p_e_g.html#gadd9b446742ac8a3923f7992c7988fea8',1,'turbojpeg.h']]],
['tjregion',['tjregion',['../structtjregion.html',1,'']]],
['tjsamp',['TJSAMP',['../group___turbo_j_p_e_g.html#ga1d047060ea80bb9820d540bb928e9074',1,'turbojpeg.h']]],
['tjsamp_5f411',['TJSAMP_411',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a28ec62575e5ea295c3fde3001dc628e2',1,'turbojpeg.h']]],
['tjsamp_5f420',['TJSAMP_420',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a63085dbf683cfe39e513cdb6343e3737',1,'turbojpeg.h']]],
['tjsamp_5f422',['TJSAMP_422',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a136130902cc578f11f32429b59368404',1,'turbojpeg.h']]],
['tjsamp_5f440',['TJSAMP_440',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074accf740e6f3aa6ba20ba922cad13cb974',1,'turbojpeg.h']]],
['tjsamp_5f444',['TJSAMP_444',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074afb8da4f44197837bdec0a4f593dacae3',1,'turbojpeg.h']]],
['tjsamp_5fgray',['TJSAMP_GRAY',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a3f1c9504842ddc7a48d0f690754b6248',1,'turbojpeg.h']]],
['tjscaled',['TJSCALED',['../group___turbo_j_p_e_g.html#ga84878bb65404204743aa18cac02781df',1,'turbojpeg.h']]],
['tjscalingfactor',['tjscalingfactor',['../structtjscalingfactor.html',1,'']]],
['tjtransform',['tjtransform',['../structtjtransform.html',1,'tjtransform'],['../group___turbo_j_p_e_g.html#gad02cd42b69f193a0623a9c801788df3a',1,'tjTransform(tjhandle handle, const unsigned char *jpegBuf, unsigned long jpegSize, int n, unsigned char **dstBufs, unsigned long *dstSizes, tjtransform *transforms, int flags):&#160;turbojpeg.h'],['../group___turbo_j_p_e_g.html#gaa29f3189c41be12ec5dee7caec318a31',1,'tjtransform():&#160;turbojpeg.h']]],
['tjxop',['TJXOP',['../group___turbo_j_p_e_g.html#ga2de531af4e7e6c4f124908376b354866',1,'turbojpeg.h']]],
['tjxop_5fhflip',['TJXOP_HFLIP',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866aa0df69776caa30f0fa28e26332d311ce',1,'turbojpeg.h']]],
['tjxop_5fnone',['TJXOP_NONE',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866aad88c0366cd3f7d0eac9d7a3fa1c2c27',1,'turbojpeg.h']]],
['tjxop_5frot180',['TJXOP_ROT180',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a140952eb8dd0300accfcc22726d69692',1,'turbojpeg.h']]],
['tjxop_5frot270',['TJXOP_ROT270',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a3064ee5dfb7f032df332818587567a08',1,'turbojpeg.h']]],
['tjxop_5frot90',['TJXOP_ROT90',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a43b2bbb23bc4bd548422d43fbe9af128',1,'turbojpeg.h']]],
['tjxop_5ftranspose',['TJXOP_TRANSPOSE',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a31060aed199f886afdd417f80499c32d',1,'turbojpeg.h']]],
['tjxop_5ftransverse',['TJXOP_TRANSVERSE',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866af3b14d488aea6ece9e5b3df73a74d6a4',1,'turbojpeg.h']]],
['tjxop_5fvflip',['TJXOP_VFLIP',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a324eddfbec53b7e691f61e56929d0d5d',1,'turbojpeg.h']]],
['tjxopt_5fcrop',['TJXOPT_CROP',['../group___turbo_j_p_e_g.html#ga9c771a757fc1294add611906b89ab2d2',1,'turbojpeg.h']]],
['tjxopt_5fgray',['TJXOPT_GRAY',['../group___turbo_j_p_e_g.html#ga3acee7b48ade1b99e5588736007c2589',1,'turbojpeg.h']]],
['tjxopt_5fnooutput',['TJXOPT_NOOUTPUT',['../group___turbo_j_p_e_g.html#gafbf992bbf6e006705886333703ffab31',1,'turbojpeg.h']]],
['tjxopt_5fperfect',['TJXOPT_PERFECT',['../group___turbo_j_p_e_g.html#ga50e03cb5ed115330e212417429600b00',1,'turbojpeg.h']]],
['tjxopt_5ftrim',['TJXOPT_TRIM',['../group___turbo_j_p_e_g.html#ga319826b7eb1583c0595bbe7b95428709',1,'turbojpeg.h']]],
['turbojpeg',['TurboJPEG',['../group___turbo_j_p_e_g.html',1,'']]]
];

12
doc/html/search/all_77.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_77.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_w">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjregion.html#ab6eb73ceef584fc23c8c8097926dce42" target="_parent">w</a>
<span class="SRScope">tjregion</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/all_77.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['w',['w',['../structtjregion.html#ab6eb73ceef584fc23c8c8097926dce42',1,'tjregion']]]
];

12
doc/html/search/all_78.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_78.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_x">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjregion.html#a4b6a37a93997091b26a75831fa291ad9" target="_parent">x</a>
<span class="SRScope">tjregion</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/all_78.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['x',['x',['../structtjregion.html#a4b6a37a93997091b26a75831fa291ad9',1,'tjregion']]]
];

12
doc/html/search/all_79.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="all_79.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_y">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjregion.html#a7b3e0c24cfe87acc80e334cafdcf22c2" target="_parent">y</a>
<span class="SRScope">tjregion</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/all_79.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['y',['y',['../structtjregion.html#a7b3e0c24cfe87acc80e334cafdcf22c2',1,'tjregion']]]
];

21
doc/html/search/classes_74.html
View File

@@ -1,27 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="classes_74.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_tjregion">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjregion.html" target="_parent">tjregion</a>
</div>
</div>
<div class="SRResult" id="SR_tjscalingfactor">
<div class="SREntry">
<a id="Item1" onkeydown="return searchResults.Nav(event,1)" onkeypress="return searchResults.Nav(event,1)" onkeyup="return searchResults.Nav(event,1)" class="SRSymbol" href="../structtjscalingfactor.html" target="_parent">tjscalingfactor</a>
</div>
</div>
<div class="SRResult" id="SR_tjtransform">
<div class="SREntry">
<a id="Item2" onkeydown="return searchResults.Nav(event,2)" onkeypress="return searchResults.Nav(event,2)" onkeyup="return searchResults.Nav(event,2)" class="SRSymbol" href="../structtjtransform.html" target="_parent">tjtransform</a>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

6
doc/html/search/classes_74.js Normal file
View File

@@ -0,0 +1,6 @@
var searchData=
[
['tjregion',['tjregion',['../structtjregion.html',1,'']]],
['tjscalingfactor',['tjscalingfactor',['../structtjscalingfactor.html',1,'']]],
['tjtransform',['tjtransform',['../structtjtransform.html',1,'']]]
];

26
doc/html/search/enums_74.html Normal file
View File

@@ -0,0 +1,26 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="enums_74.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--
document.getElementById("Loading").style.display="none";
document.getElementById("NoMatches").style.display="none";
var searchResults = new SearchResults("searchResults");
searchResults.Search();
--></script>
</div>
</body>
</html>

7
doc/html/search/enums_74.js Normal file
View File

@@ -0,0 +1,7 @@
var searchData=
[
['tjcs',['TJCS',['../group___turbo_j_p_e_g.html#ga4f83ad3368e0e29d1957be0efa7c3720',1,'turbojpeg.h']]],
['tjpf',['TJPF',['../group___turbo_j_p_e_g.html#gac916144e26c3817ac514e64ae5d12e2a',1,'turbojpeg.h']]],
['tjsamp',['TJSAMP',['../group___turbo_j_p_e_g.html#ga1d047060ea80bb9820d540bb928e9074',1,'turbojpeg.h']]],
['tjxop',['TJXOP',['../group___turbo_j_p_e_g.html#ga2de531af4e7e6c4f124908376b354866',1,'turbojpeg.h']]]
];

26
doc/html/search/enumvalues_74.html Normal file
View File

@@ -0,0 +1,26 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="enumvalues_74.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--
document.getElementById("Loading").style.display="none";
document.getElementById("NoMatches").style.display="none";
var searchResults = new SearchResults("searchResults");
searchResults.Search();
--></script>
</div>
</body>
</html>

34
doc/html/search/enumvalues_74.js Normal file
View File

@@ -0,0 +1,34 @@
var searchData=
[
['tjcs_5fcmyk',['TJCS_CMYK',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a6c8b636152ac8195b869587db315ee53',1,'turbojpeg.h']]],
['tjcs_5fgray',['TJCS_GRAY',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720ab3e7d6a87f695e45b81c1b5262b5a50a',1,'turbojpeg.h']]],
['tjcs_5frgb',['TJCS_RGB',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a677cb7ccb85c4038ac41964a2e09e555',1,'turbojpeg.h']]],
['tjcs_5fycbcr',['TJCS_YCbCr',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a7389b8f65bb387ffedce3efd0d78ec75',1,'turbojpeg.h']]],
['tjcs_5fycck',['TJCS_YCCK',['../group___turbo_j_p_e_g.html#gga4f83ad3368e0e29d1957be0efa7c3720a53839e0fe867b76b58d16b0a1a7c598e',1,'turbojpeg.h']]],
['tjpf_5fabgr',['TJPF_ABGR',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa1ba1a7f1631dbeaa49a0a85fc4a40081',1,'turbojpeg.h']]],
['tjpf_5fargb',['TJPF_ARGB',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aae8f846ed9d9de99b6e1dfe448848765c',1,'turbojpeg.h']]],
['tjpf_5fbgr',['TJPF_BGR',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aab10624437fb8ef495a0b153e65749839',1,'turbojpeg.h']]],
['tjpf_5fbgra',['TJPF_BGRA',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aac037ff1845cf9b74bb81a3659c2b9fb4',1,'turbojpeg.h']]],
['tjpf_5fbgrx',['TJPF_BGRX',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa2a1fbf569ca79897eae886e3376ca4c8',1,'turbojpeg.h']]],
['tjpf_5fcmyk',['TJPF_CMYK',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa7f5100ec44c91994e243f1cf55553f8b',1,'turbojpeg.h']]],
['tjpf_5fgray',['TJPF_GRAY',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa5431b54b015337705f13118073711a1a',1,'turbojpeg.h']]],
['tjpf_5frgb',['TJPF_RGB',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa7ce93230bff449518ce387c17e6ed37c',1,'turbojpeg.h']]],
['tjpf_5frgba',['TJPF_RGBA',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa88d2e88fab67f6503cf972e14851cc12',1,'turbojpeg.h']]],
['tjpf_5frgbx',['TJPF_RGBX',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aa83973bebb7e2dc6fa8bae89ff3f42e01',1,'turbojpeg.h']]],
['tjpf_5fxbgr',['TJPF_XBGR',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aaf6603b27147de47e212e75dac027b2af',1,'turbojpeg.h']]],
['tjpf_5fxrgb',['TJPF_XRGB',['../group___turbo_j_p_e_g.html#ggac916144e26c3817ac514e64ae5d12e2aadae996905efcfa3b42a0bb3bea7f9d84',1,'turbojpeg.h']]],
['tjsamp_5f411',['TJSAMP_411',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a28ec62575e5ea295c3fde3001dc628e2',1,'turbojpeg.h']]],
['tjsamp_5f420',['TJSAMP_420',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a63085dbf683cfe39e513cdb6343e3737',1,'turbojpeg.h']]],
['tjsamp_5f422',['TJSAMP_422',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a136130902cc578f11f32429b59368404',1,'turbojpeg.h']]],
['tjsamp_5f440',['TJSAMP_440',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074accf740e6f3aa6ba20ba922cad13cb974',1,'turbojpeg.h']]],
['tjsamp_5f444',['TJSAMP_444',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074afb8da4f44197837bdec0a4f593dacae3',1,'turbojpeg.h']]],
['tjsamp_5fgray',['TJSAMP_GRAY',['../group___turbo_j_p_e_g.html#gga1d047060ea80bb9820d540bb928e9074a3f1c9504842ddc7a48d0f690754b6248',1,'turbojpeg.h']]],
['tjxop_5fhflip',['TJXOP_HFLIP',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866aa0df69776caa30f0fa28e26332d311ce',1,'turbojpeg.h']]],
['tjxop_5fnone',['TJXOP_NONE',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866aad88c0366cd3f7d0eac9d7a3fa1c2c27',1,'turbojpeg.h']]],
['tjxop_5frot180',['TJXOP_ROT180',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a140952eb8dd0300accfcc22726d69692',1,'turbojpeg.h']]],
['tjxop_5frot270',['TJXOP_ROT270',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a3064ee5dfb7f032df332818587567a08',1,'turbojpeg.h']]],
['tjxop_5frot90',['TJXOP_ROT90',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a43b2bbb23bc4bd548422d43fbe9af128',1,'turbojpeg.h']]],
['tjxop_5ftranspose',['TJXOP_TRANSPOSE',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a31060aed199f886afdd417f80499c32d',1,'turbojpeg.h']]],
['tjxop_5ftransverse',['TJXOP_TRANSVERSE',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866af3b14d488aea6ece9e5b3df73a74d6a4',1,'turbojpeg.h']]],
['tjxop_5fvflip',['TJXOP_VFLIP',['../group___turbo_j_p_e_g.html#gga2de531af4e7e6c4f124908376b354866a324eddfbec53b7e691f61e56929d0d5d',1,'turbojpeg.h']]]
];

26
doc/html/search/functions_74.html Normal file
View File

@@ -0,0 +1,26 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="functions_74.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--
document.getElementById("Loading").style.display="none";
document.getElementById("NoMatches").style.display="none";
var searchResults = new SearchResults("searchResults");
searchResults.Search();
--></script>
</div>
</body>
</html>

28
doc/html/search/functions_74.js Normal file
View File

@@ -0,0 +1,28 @@
var searchData=
[
['tjalloc',['tjAlloc',['../group___turbo_j_p_e_g.html#ga5c9234bda6d993cdaffdd89bf81a00ff',1,'turbojpeg.h']]],
['tjbufsize',['tjBufSize',['../group___turbo_j_p_e_g.html#gaccc5bca7f12fcdcc302e6e1c6d4b311b',1,'turbojpeg.h']]],
['tjbufsizeyuv2',['tjBufSizeYUV2',['../group___turbo_j_p_e_g.html#gaf451664a62c1f6c7cc5a6401f32908c9',1,'turbojpeg.h']]],
['tjcompress2',['tjCompress2',['../group___turbo_j_p_e_g.html#gaf38f2ed44bdc88e730e08b632fa6e88e',1,'turbojpeg.h']]],
['tjcompressfromyuv',['tjCompressFromYUV',['../group___turbo_j_p_e_g.html#ga6f6de375d6ec0020faba627e37e5a060',1,'turbojpeg.h']]],
['tjcompressfromyuvplanes',['tjCompressFromYUVPlanes',['../group___turbo_j_p_e_g.html#ga0b84c682d8accf097d7a743c965d3464',1,'turbojpeg.h']]],
['tjdecodeyuv',['tjDecodeYUV',['../group___turbo_j_p_e_g.html#ga077c61027b875afecd5a1613bf18b3c1',1,'turbojpeg.h']]],
['tjdecodeyuvplanes',['tjDecodeYUVPlanes',['../group___turbo_j_p_e_g.html#gaf42f19b7a496eb18bdc84fe61ee6d3e2',1,'turbojpeg.h']]],
['tjdecompress2',['tjDecompress2',['../group___turbo_j_p_e_g.html#gad8026a417e16a76313bc0a6c9e8b2ba2',1,'turbojpeg.h']]],
['tjdecompressheader3',['tjDecompressHeader3',['../group___turbo_j_p_e_g.html#ga3fced455e504e8ff4fbad28ba94a3020',1,'turbojpeg.h']]],
['tjdecompresstoyuv2',['tjDecompressToYUV2',['../group___turbo_j_p_e_g.html#ga39e08906528db5a764670ea48d344b09',1,'turbojpeg.h']]],
['tjdecompresstoyuvplanes',['tjDecompressToYUVPlanes',['../group___turbo_j_p_e_g.html#ga38d0ef90692663b3ffb5b16da2541512',1,'turbojpeg.h']]],
['tjdestroy',['tjDestroy',['../group___turbo_j_p_e_g.html#ga674adee917b95ad4a896f1ba39e12540',1,'turbojpeg.h']]],
['tjencodeyuv3',['tjEncodeYUV3',['../group___turbo_j_p_e_g.html#gaabe05acd734990053ad1294b5ef239aa',1,'turbojpeg.h']]],
['tjencodeyuvplanes',['tjEncodeYUVPlanes',['../group___turbo_j_p_e_g.html#ga8a65ed3bd12df57c219d46afbc9008f1',1,'turbojpeg.h']]],
['tjfree',['tjFree',['../group___turbo_j_p_e_g.html#ga8c4a1231dc06a450514c835f6471f137',1,'turbojpeg.h']]],
['tjgeterrorstr',['tjGetErrorStr',['../group___turbo_j_p_e_g.html#ga9af79c908ec131b1ae8d52fe40375abf',1,'turbojpeg.h']]],
['tjgetscalingfactors',['tjGetScalingFactors',['../group___turbo_j_p_e_g.html#ga6449044b9af402999ccf52f401333be8',1,'turbojpeg.h']]],
['tjinitcompress',['tjInitCompress',['../group___turbo_j_p_e_g.html#ga3d10c47fbe4a2489a2b30c931551d01a',1,'turbojpeg.h']]],
['tjinitdecompress',['tjInitDecompress',['../group___turbo_j_p_e_g.html#gae5408179d041e2a2f7199c8283cf649e',1,'turbojpeg.h']]],
['tjinittransform',['tjInitTransform',['../group___turbo_j_p_e_g.html#ga3155b775bfbac9dbba869b95a0367902',1,'turbojpeg.h']]],
['tjplaneheight',['tjPlaneHeight',['../group___turbo_j_p_e_g.html#ga1a209696c6a80748f20e134b3c64789f',1,'turbojpeg.h']]],
['tjplanesizeyuv',['tjPlaneSizeYUV',['../group___turbo_j_p_e_g.html#ga6f98d977bfa9d167c97172e876ba61e2',1,'turbojpeg.h']]],
['tjplanewidth',['tjPlaneWidth',['../group___turbo_j_p_e_g.html#ga63fb66bb1e36c74008c4634360becbb1',1,'turbojpeg.h']]],
['tjtransform',['tjTransform',['../group___turbo_j_p_e_g.html#gad02cd42b69f193a0623a9c801788df3a',1,'turbojpeg.h']]]
];

26
doc/html/search/groups_74.html Normal file
View File

@@ -0,0 +1,26 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="groups_74.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--
document.getElementById("Loading").style.display="none";
document.getElementById("NoMatches").style.display="none";
var searchResults = new SearchResults("searchResults");
searchResults.Search();
--></script>
</div>
</body>
</html>

4
doc/html/search/groups_74.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['turbojpeg',['TurboJPEG',['../group___turbo_j_p_e_g.html',1,'']]]
];

45
doc/html/search/search.css
View File

@@ -4,13 +4,6 @@
float: left;
}
#searchli {
float: right;
display: block;
width: 170px;
height: 36px;
}
#MSearchBox {
white-space : nowrap;
position: absolute;
@@ -20,6 +13,7 @@
right: 0px;
width: 170px;
z-index: 102;
background-color: white;
}
#MSearchBox .left
@@ -224,6 +218,10 @@ a.SRScope:focus, a.SRScope:active {
text-decoration: underline;
}
span.SRScope {
padding-left: 4px;
}
.SRPage .SRStatus {
padding: 2px 5px;
font-size: 8pt;
@@ -238,3 +236,36 @@ DIV.searchresults {
margin-left: 10px;
margin-right: 10px;
}
/*---------------- External search page results */
.searchresult {
background-color: #F0F3F8;
}
.pages b {
color: white;
padding: 5px 5px 3px 5px;
background-image: url("../tab_a.png");
background-repeat: repeat-x;
text-shadow: 0 1px 1px #000000;
}
.pages {
line-height: 17px;
margin-left: 4px;
text-decoration: none;
}
.hl {
font-weight: bold;
}
#searchresults {
margin-bottom: 20px;
}
.searchpages {
margin-top: 10px;
}

87
doc/html/search/search.js
View File

@@ -9,14 +9,24 @@ var indexSectionsWithContent =
{
0: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001100010000011001010011100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
1: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
2: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001100010000011001000011100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"
2: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
3: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000001100010000011001010011100000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
4: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
5: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
6: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000",
7: "0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000010000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000"
};
var indexSectionNames =
{
0: "all",
1: "classes",
2: "variables"
2: "functions",
3: "variables",
4: "typedefs",
5: "enums",
6: "enumvalues",
7: "groups"
};
function convertToId(search)
@@ -261,7 +271,7 @@ function SearchBox(name, resultsPath, inFrame, label)
var node = child.firstChild;
if (j==id)
{
node.innerHTML='&bull;';
node.innerHTML='&#8226;';
}
else
{
@@ -358,7 +368,7 @@ function SearchBox(name, resultsPath, inFrame, label)
hasResultsPage = false;
}
window.frames.MSearchResults.location.href = resultsPageWithSearch;
window.frames.MSearchResults.location = resultsPageWithSearch;
var domPopupSearchResultsWindow = this.DOMPopupSearchResultsWindow();
if (domPopupSearchResultsWindow.style.display!='block')
@@ -728,3 +738,72 @@ function SearchResults(name)
return false;
}
}
function setKeyActions(elem,action)
{
elem.setAttribute('onkeydown',action);
elem.setAttribute('onkeypress',action);
elem.setAttribute('onkeyup',action);
}
function setClassAttr(elem,attr)
{
elem.setAttribute('class',attr);
elem.setAttribute('className',attr);
}
function createResults()
{
var results = document.getElementById("SRResults");
for (var e=0; e<searchData.length; e++)
{
var id = searchData[e][0];
var srResult = document.createElement('div');
srResult.setAttribute('id','SR_'+id);
setClassAttr(srResult,'SRResult');
var srEntry = document.createElement('div');
setClassAttr(srEntry,'SREntry');
var srLink = document.createElement('a');
srLink.setAttribute('id','Item'+e);
setKeyActions(srLink,'return searchResults.Nav(event,'+e+')');
setClassAttr(srLink,'SRSymbol');
srLink.innerHTML = searchData[e][1][0];
srEntry.appendChild(srLink);
if (searchData[e][1].length==2) // single result
{
srLink.setAttribute('href',searchData[e][1][1][0]);
if (searchData[e][1][1][1])
{
srLink.setAttribute('target','_parent');
}
var srScope = document.createElement('span');
setClassAttr(srScope,'SRScope');
srScope.innerHTML = searchData[e][1][1][2];
srEntry.appendChild(srScope);
}
else // multiple results
{
srLink.setAttribute('href','javascript:searchResults.Toggle("SR_'+id+'")');
var srChildren = document.createElement('div');
setClassAttr(srChildren,'SRChildren');
for (var c=0; c<searchData[e][1].length-1; c++)
{
var srChild = document.createElement('a');
srChild.setAttribute('id','Item'+e+'_c'+c);
setKeyActions(srChild,'return searchResults.NavChild(event,'+e+','+c+')');
setClassAttr(srChild,'SRScope');
srChild.setAttribute('href',searchData[e][1][c+1][0]);
if (searchData[e][1][c+1][1])
{
srChild.setAttribute('target','_parent');
}
srChild.innerHTML = searchData[e][1][c+1][2];
srChildren.appendChild(srChild);
}
srEntry.appendChild(srChildren);
}
srResult.appendChild(srEntry);
results.appendChild(srResult);
}
}

26
doc/html/search/typedefs_74.html Normal file
View File

@@ -0,0 +1,26 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="typedefs_74.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--
document.getElementById("Loading").style.display="none";
document.getElementById("NoMatches").style.display="none";
var searchResults = new SearchResults("searchResults");
searchResults.Search();
--></script>
</div>
</body>
</html>

5
doc/html/search/typedefs_74.js Normal file
View File

@@ -0,0 +1,5 @@
var searchData=
[
['tjhandle',['tjhandle',['../group___turbo_j_p_e_g.html#ga758d2634ecb4949de7815cba621f5763',1,'turbojpeg.h']]],
['tjtransform',['tjtransform',['../group___turbo_j_p_e_g.html#gaa29f3189c41be12ec5dee7caec318a31',1,'turbojpeg.h']]]
];

12
doc/html/search/variables_63.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="variables_63.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_customfilter">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjtransform.html#a43ee1bcdd2a8d7249a756774f78793c1" target="_parent">customFilter</a>
<span class="SRScope">tjtransform</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

4
doc/html/search/variables_63.js Normal file
View File

@@ -0,0 +1,4 @@
var searchData=
[
['customfilter',['customFilter',['../structtjtransform.html#a43ee1bcdd2a8d7249a756774f78793c1',1,'tjtransform']]]
];

18
doc/html/search/variables_64.html
View File

@@ -1,24 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="variables_64.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_data">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjtransform.html#a688fe8f1a8ecc12a538d9e561cf338e3" target="_parent">data</a>
<span class="SRScope">tjtransform</span>
</div>
</div>
<div class="SRResult" id="SR_denom">
<div class="SREntry">
<a id="Item1" onkeydown="return searchResults.Nav(event,1)" onkeypress="return searchResults.Nav(event,1)" onkeyup="return searchResults.Nav(event,1)" class="SRSymbol" href="../structtjscalingfactor.html#aefbcdf3e9e62274b2d312c695f133ce3" target="_parent">denom</a>
<span class="SRScope">tjscalingfactor</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

5
doc/html/search/variables_64.js Normal file
View File

@@ -0,0 +1,5 @@
var searchData=
[
['data',['data',['../structtjtransform.html#a688fe8f1a8ecc12a538d9e561cf338e3',1,'tjtransform']]],
['denom',['denom',['../structtjscalingfactor.html#aefbcdf3e9e62274b2d312c695f133ce3',1,'tjscalingfactor']]]
];

12
doc/html/search/variables_68.html
View File

@@ -1,18 +1,18 @@
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html><head><title></title>
<meta http-equiv="Content-Type" content="text/xhtml;charset=UTF-8"/>
<meta name="generator" content="Doxygen 1.8.3.1">
<link rel="stylesheet" type="text/css" href="search.css"/>
<script type="text/javascript" src="variables_68.js"></script>
<script type="text/javascript" src="search.js"></script>
</head>
<body class="SRPage">
<div id="SRIndex">
<div class="SRStatus" id="Loading">Loading...</div>
<div class="SRResult" id="SR_h">
<div class="SREntry">
<a id="Item0" onkeydown="return searchResults.Nav(event,0)" onkeypress="return searchResults.Nav(event,0)" onkeyup="return searchResults.Nav(event,0)" class="SRSymbol" href="../structtjregion.html#aecefc45a26f4d8b60dd4d825c1710115" target="_parent">h</a>
<span class="SRScope">tjregion</span>
</div>
</div>
<div id="SRResults"></div>
<script type="text/javascript"><!--
createResults();
--></script>
<div class="SRStatus" id="Searching">Searching...</div>
<div class="SRStatus" id="NoMatches">No Matches</div>
<script type="text/javascript"><!--

Some files were not shown because too many files have changed in this diff Show More