The Independent JPEG Group's JPEG software v8a

Makefile.am

@@ -0,0 +1,133 @@
+## Process this file with automake to produce Makefile.in
+#
+#  Automake Makefile for the JPEG library
+#
+#  This file is written by Bob Friesenhahn, Guido Vollbeding
+#
+
+# Sources to build library
+LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c
+
+# System dependent sources
+SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+
+# Headers which are installed to support the library
+INSTINCLUDES  = jerror.h jmorecfg.h jpeglib.h
+
+# Headers which are not installed
+OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \
+        jversion.h transupp.h
+
+# Manual pages (Automake uses 'MANS' for itself)
+DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
+
+# Other documentation files
+DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \
+        structure.txt coderules.txt filelist.txt change.log
+
+# Makefiles for various systems
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \
+        makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \
+        makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \
+        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
+        makefile.vms makvms.opt
+
+# Configuration files
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+
+# Support scripts for configure
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing
+
+# Miscellaneous support files
+OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \
+        libjpeg.map
+
+# Test support files
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+
+# libtool libraries to build
+lib_LTLIBRARIES = libjpeg.la
+
+# Library sources for libjpeg.la
+libjpeg_la_SOURCES = $(LIBSOURCES)
+
+# LDFLAGS for libjpeg.la
+libjpeg_la_LDFLAGS = -no-undefined \
+        -version-info $(JPEG_LIB_VERSION)
+
+if HAVE_LD_VERSION_SCRIPT
+  libjpeg_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libjpeg.map
+endif
+
+# Executables to build
+bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+
+# Executable sources & libs
+cjpeg_SOURCES    = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \
+        rdswitch.c cdjpeg.c
+cjpeg_LDADD      = libjpeg.la
+djpeg_SOURCES    = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \
+        rdcolmap.c cdjpeg.c
+djpeg_LDADD      = libjpeg.la
+jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c
+jpegtran_LDADD   = libjpeg.la
+rdjpgcom_SOURCES = rdjpgcom.c
+wrjpgcom_SOURCES = wrjpgcom.c
+
+# Manual pages to install
+man_MANS = $(DISTMANS)
+
+# Headers to install
+include_HEADERS = $(INSTINCLUDES)
+
+# Other distributed headers
+noinst_HEADERS = $(OTHERINCLUDES)
+
+# Other distributed files
+EXTRA_DIST =  $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \
+        $(OTHERFILES) $(TESTFILES)
+
+# Files to be cleaned
+CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \
+        testoutt.jpg
+
+# Install jconfig.h
+install-data-local:
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	$(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h
+
+# Uninstall jconfig.h
+uninstall-local:
+	rm -f $(DESTDIR)$(includedir)/jconfig.h
+
+# Run tests
+test: check-local
+check-local:
+	$(RM) testout*
+	./djpeg -dct int -ppm -outfile testout.ppm  $(srcdir)/testorig.jpg
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
+	./cjpeg -dct int -outfile testout.jpg  $(srcdir)/testimg.ppm
+	./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg
+	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm
+	./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg
+	cmp $(srcdir)/testimg.ppm testout.ppm
+	cmp $(srcdir)/testimg.bmp testout.bmp
+	cmp $(srcdir)/testimg.jpg testout.jpg
+	cmp $(srcdir)/testimg.ppm testoutp.ppm
+	cmp $(srcdir)/testimgp.jpg testoutp.jpg
+	cmp $(srcdir)/testorig.jpg testoutt.jpg

README

@@ -1,21 +1,17 @@
 The Independent JPEG Group's JPEG software
 ==========================================
 
-README for release 6a of 7-Feb-96
-=================================
+README for release 8a of 28-Feb-2010
+====================================
 
-This distribution contains the sixth public release of the Independent JPEG
+This distribution contains the eighth public release of the Independent JPEG
 Group's free JPEG software.  You are welcome to redistribute this software and
 to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
 
-Serious users of this software (particularly those incorporating it into
-larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to
-our electronic mailing list.  Mailing list members are notified of updates
-and have a chance to participate in technical discussions, etc.
-
-This software is the work of Tom Lane, Philip Gladstone, Luis Ortiz, Jim
-Boucher, Lee Crocker, Julian Minguillon, George Phillips, Davide Rossi,
-Ge' Weijers, and other members of the Independent JPEG Group.
+This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone,
+Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson,
+Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers,
+and other members of the Independent JPEG Group.
 
 IJG is not affiliated with the official ISO JPEG standards committee.
 
@@ -29,27 +25,27 @@ OVERVIEW            General description of JPEG and the IJG software.
 LEGAL ISSUES        Copyright, lack of warranty, terms of distribution.
 REFERENCES          Where to learn more about JPEG.
 ARCHIVE LOCATIONS   Where to find newer versions of this software.
-RELATED SOFTWARE    Other stuff you should get.
+ACKNOWLEDGMENTS     Special thanks.
 FILE FORMAT WARS    Software *not* to get.
 TO DO               Plans for future IJG releases.
 
 Other documentation files in the distribution are:
 
 User documentation:
-  install.doc       How to configure and install the IJG software.
-  usage.doc         Usage instructions for cjpeg, djpeg, jpegtran,
+  install.txt       How to configure and install the IJG software.
+  usage.txt         Usage instructions for cjpeg, djpeg, jpegtran,
                     rdjpgcom, and wrjpgcom.
-  *.1               Unix-style man pages for programs (same info as usage.doc).
-  wizard.doc        Advanced usage instructions for JPEG wizards only.
+  *.1               Unix-style man pages for programs (same info as usage.txt).
+  wizard.txt        Advanced usage instructions for JPEG wizards only.
   change.log        Version-to-version change highlights.
 Programmer and internal documentation:
-  libjpeg.doc       How to use the JPEG library in your own programs.
+  libjpeg.txt       How to use the JPEG library in your own programs.
   example.c         Sample code for calling the JPEG library.
-  structure.doc     Overview of the JPEG library's internal structure.
-  filelist.doc      Road map of IJG files.
-  coderules.doc     Coding style rules --- please read if you contribute code.
+  structure.txt     Overview of the JPEG library's internal structure.
+  filelist.txt      Road map of IJG files.
+  coderules.txt     Coding style rules --- please read if you contribute code.
 
-Please read at least the files install.doc and usage.doc.  Useful information
+Please read at least the files install.txt and usage.txt.  Some information
 can also be found in the JPEG FAQ (Frequently Asked Questions) article.  See
 ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
 
@@ -61,24 +57,15 @@ the order listed) before diving into the code.
 OVERVIEW
 ========
 
-This package contains C software to implement JPEG image compression and
-decompression.  JPEG (pronounced "jay-peg") is a standardized compression
-method for full-color and gray-scale images.  JPEG is intended for compressing
-"real-world" scenes; line drawings, cartoons and other non-realistic images
-are not its strong suit.  JPEG is lossy, meaning that the output image is not
-exactly identical to the input image.  Hence you must not use JPEG if you
-have to have identical output bits.  However, on typical photographic images,
-very good compression levels can be obtained with no visible change, and
-remarkably high compression levels are possible if you can tolerate a
-low-quality image.  For more details, see the references, or just experiment
-with various compression settings.
+This package contains C software to implement JPEG image encoding, decoding,
+and transcoding.  JPEG (pronounced "jay-peg") is a standardized compression
+method for full-color and gray-scale images.
 
 This software implements JPEG baseline, extended-sequential, and progressive
 compression processes.  Provision is made for supporting all variants of these
 processes, although some uncommon parameter settings aren't implemented yet.
-For legal reasons, we are not distributing code for the arithmetic-coding
-variants of JPEG; see LEGAL ISSUES.  We have made no provision for supporting
-the hierarchical or lossless processes defined in the standard.
+We have made no provision for supporting the hierarchical or lossless
+processes defined in the standard.
 
 We provide a set of library routines for reading and writing JPEG image files,
 plus two sample applications "cjpeg" and "djpeg", which use the library to
@@ -90,10 +77,11 @@ considerable functionality beyond the bare JPEG coding/decoding capability;
 for example, the color quantization modules are not strictly part of JPEG
 decoding, but they are essential for output to colormapped file formats or
 colormapped displays.  These extra functions can be compiled out of the
-library if not required for a particular application.  We have also included
-"jpegtran", a utility for lossless transcoding between different JPEG
-processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
-inserting and extracting textual comments in JFIF files.
+library if not required for a particular application.
+
+We have also included "jpegtran", a utility for lossless transcoding between
+different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple
+applications for inserting and extracting textual comments in JFIF files.
 
 The emphasis in designing this software has been on achieving portability and
 flexibility, while also making it fast enough to be useful.  In particular,
@@ -126,7 +114,7 @@ with respect to this software, its quality, accuracy, merchantability, or
 fitness for a particular purpose.  This software is provided "AS IS", and you,
 its user, assume the entire risk as to its quality and accuracy.
 
-This software is copyright (C) 1991-1996, Thomas G. Lane.
+This software is copyright (C) 1991-2010, Thomas G. Lane, Guido Vollbeding.
 All Rights Reserved except as specified below.
 
 Permission is hereby granted to use, copy, modify, and distribute this
@@ -166,25 +154,18 @@ ansi2knr.c for full details.)  However, since ansi2knr.c is not needed as part
 of any program generated from the IJG code, this does not limit you more than
 the foregoing paragraphs do.
 
-The configuration script "configure" was produced with GNU Autoconf.  It
-is copyright by the Free Software Foundation but is freely distributable.
+The Unix configuration script "configure" was produced with GNU Autoconf.
+It is copyright by the Free Software Foundation but is freely distributable.
+The same holds for its supporting scripts (config.guess, config.sub,
+ltmain.sh).  Another support script, install-sh, is copyright by X Consortium
+but is also freely distributable.
 
-It appears that the arithmetic coding option of the JPEG spec is covered by
-patents owned by IBM, AT&T, and Mitsubishi.  Hence arithmetic coding cannot
-legally be used without obtaining one or more licenses.  For this reason,
-support for arithmetic coding has been removed from the free JPEG software.
-(Since arithmetic coding provides only a marginal gain over the unpatented
-Huffman mode, it is unlikely that very many implementations will support it.)
-So far as we are aware, there are no patent restrictions on the remaining
-code.
-
-WARNING: Unisys has begun to enforce their patent on LZW compression against
-GIF encoders and decoders.  You will need a license from Unisys to use the
-included rdgif.c or wrgif.c files in a commercial or shareware application.
-At this time, Unisys is not enforcing their patent against freeware, so
-distribution of this package remains legal.  However, we intend to remove
-GIF support from the IJG package as soon as a suitable replacement format
-becomes reasonably popular.
+The IJG distribution formerly included code to read and write GIF files.
+To avoid entanglement with the Unisys LZW patent, GIF reading support has
+been removed altogether, and the GIF writer has been simplified to produce
+"uncompressed GIFs".  This technique does not use the LZW algorithm; the
+resulting GIF files are larger than usual, but are readable by all standard
+GIF decoders.
 
 We are required to state that
     "The Graphics Interchange Format(c) is the Copyright property of
@@ -195,7 +176,7 @@ We are required to state that
 REFERENCES
 ==========
 
-We highly recommend reading one or more of these references before trying to
+We recommend reading one or more of these references before trying to
 understand the innards of the JPEG software.
 
 The best short technical introduction to the JPEG compression algorithm is
@@ -203,181 +184,142 @@ The best short technical introduction to the JPEG compression algorithm is
 	Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
 (Adjacent articles in that issue discuss MPEG motion picture compression,
 applications of JPEG, and related topics.)  If you don't have the CACM issue
-handy, a PostScript file containing a revised version of Wallace's article
-is available at ftp.uu.net, graphics/jpeg/wallace.ps.gz.  The file (actually
+handy, a PostScript file containing a revised version of Wallace's article is
+available at http://www.ijg.org/files/wallace.ps.gz.  The file (actually
 a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
 omits the sample images that appeared in CACM, but it includes corrections
-and some added material.  Note: the Wallace article is copyright ACM and
-IEEE, and it may not be used for commercial purposes.
+and some added material.  Note: the Wallace article is copyright ACM and IEEE,
+and it may not be used for commercial purposes.
 
 A somewhat less technical, more leisurely introduction to JPEG can be found in
-"The Data Compression Book" by Mark Nelson, published by M&T Books (Redwood
-City, CA), 1991, ISBN 1-55851-216-0.  This book provides good explanations and
-example C code for a multitude of compression methods including JPEG.  It is
-an excellent source if you are comfortable reading C code but don't know much
-about data compression in general.  The book's JPEG sample code is far from
-industrial-strength, but when you are ready to look at a full implementation,
-you've got one here...
+"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by
+M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1.  This book provides
+good explanations and example C code for a multitude of compression methods
+including JPEG.  It is an excellent source if you are comfortable reading C
+code but don't know much about data compression in general.  The book's JPEG
+sample code is far from industrial-strength, but when you are ready to look
+at a full implementation, you've got one here...
 
-The best full description of JPEG is the textbook "JPEG Still Image Data
-Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
-by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.  Price US$59.95, 638 pp.
-The book includes the complete text of the ISO JPEG standards (DIS 10918-1
-and draft DIS 10918-2).  This is by far the most complete exposition of JPEG
-in existence, and we highly recommend it.
+The best currently available description of JPEG is the textbook "JPEG Still
+Image Data Compression Standard" by William B. Pennebaker and Joan L.
+Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.
+Price US$59.95, 638 pp.  The book includes the complete text of the ISO JPEG
+standards (DIS 10918-1 and draft DIS 10918-2).
+Although this is by far the most detailed and comprehensive exposition of
+JPEG publicly available, we point out that it is still missing an explanation
+of the most essential properties and algorithms of the underlying DCT
+technology.
+If you think that you know about DCT-based JPEG after reading this book,
+then you are in delusion.  The real fundamentals and corresponding potential
+of DCT-based JPEG are not publicly known so far, and that is the reason for
+all the mistaken developments taking place in the image coding domain.
 
-The JPEG standard itself is not available electronically; you must order a
-paper copy through ISO or ITU.  (Unless you feel a need to own a certified
-official copy, we recommend buying the Pennebaker and Mitchell book instead;
-it's much cheaper and includes a great deal of useful explanatory material.)
-In the USA, copies of the standard may be ordered from ANSI Sales at (212)
-642-4900, or from Global Engineering Documents at (800) 854-7179.  (ANSI
-doesn't take credit card orders, but Global does.)  It's not cheap: as of
-1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
-shipping/handling.  The standard is divided into two parts, Part 1 being the
-actual specification, while Part 2 covers compliance testing methods.  Part 1
-is titled "Digital Compression and Coding of Continuous-tone Still Images,
+The original JPEG standard is divided into two parts, Part 1 being the actual
+specification, while Part 2 covers compliance testing methods.  Part 1 is
+titled "Digital Compression and Coding of Continuous-tone Still Images,
 Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
 10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding of
 Continuous-tone Still Images, Part 2: Compliance testing" and has document
 numbers ISO/IEC IS 10918-2, ITU-T T.83.
-
-Extensions to the original JPEG standard are defined in JPEG Part 3, a new ISO
-document.  Part 3 is undergoing ISO balloting and is expected to be approved
-by the end of 1995; it will have document numbers ISO/IEC IS 10918-3, ITU-T
-T.84.  IJG currently does not support any Part 3 extensions.
+IJG JPEG 8 introduces an implementation of the JPEG SmartScale extension
+which is specified in a contributed document at ITU and ISO with title "ITU-T
+JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced Image Coding", April
+2006, Geneva, Switzerland.  The latest version of the document is Revision 3.
 
 The JPEG standard does not specify all details of an interchangeable file
 format.  For the omitted details we follow the "JFIF" conventions, revision
-1.02.  A copy of the JFIF spec is available from:
-	Literature Department
-	C-Cube Microsystems, Inc.
-	1778 McCarthy Blvd.
-	Milpitas, CA 95035
-	phone (408) 944-6300,  fax (408) 944-6314
-A PostScript version of this document is available at ftp.uu.net, file
-graphics/jpeg/jfif.ps.gz.  It can also be obtained by e-mail from the C-Cube
-mail server, netlib@c3.pla.ca.us.  Send the message "send jfif_ps from jpeg"
-to the server to obtain the JFIF document; send the message "help" if you have
-trouble.
+1.02.  JFIF 1.02 has been adopted as an Ecma International Technical Report
+and thus received a formal publication status.  It is available as a free
+download in PDF format from
+http://www.ecma-international.org/publications/techreports/E-TR-098.htm.
+A PostScript version of the JFIF document is available at
+http://www.ijg.org/files/jfif.ps.gz.  There is also a plain text version at
+http://www.ijg.org/files/jfif.txt.gz, but it is missing the figures.
 
-The TIFF 6.0 file format specification can be obtained by FTP from sgi.com
-(192.48.153.1), file graphics/tiff/TIFF6.ps.Z; or you can order a printed
-copy from Aldus Corp. at (206) 628-6593.  The JPEG incorporation scheme
+The TIFF 6.0 file format specification can be obtained by FTP from
+ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
 found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
 IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
 Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
-(Compression tag 7).  Copies of this Note can be obtained from sgi.com or
-from ftp.uu.net:/graphics/jpeg/.  It is expected that the next revision of
-the TIFF spec will replace the 6.0 JPEG design with the Note's design.
+(Compression tag 7).  Copies of this Note can be obtained from
+http://www.ijg.org/files/.  It is expected that the next revision
+of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
 Although IJG's own code does not support TIFF/JPEG, the free libtiff library
-uses our library to implement TIFF/JPEG per the Note.  libtiff is available
-from sgi.com:/graphics/tiff/.
+uses our library to implement TIFF/JPEG per the Note.
 
 
 ARCHIVE LOCATIONS
 =================
 
-The "official" archive site for this software is ftp.uu.net (Internet
-address 192.48.96.9).  The most recent released version can always be found
-there in directory graphics/jpeg.  This particular version will be archived
-as graphics/jpeg/jpegsrc.v6a.tar.gz.  If you are on the Internet, you
-can retrieve files from ftp.uu.net by standard anonymous FTP.  If you don't
-have FTP access, UUNET's archives are also available via UUCP; contact
-help@uunet.uu.net for information on retrieving files that way.
+The "official" archive site for this software is www.ijg.org.
+The most recent released version can always be found there in
+directory "files".  This particular version will be archived as
+http://www.ijg.org/files/jpegsrc.v8a.tar.gz, and in Windows-compatible
+"zip" archive format as http://www.ijg.org/files/jpegsr8a.zip.
 
-Numerous Internet sites maintain copies of the UUNET files.  However, only
-ftp.uu.net is guaranteed to have the latest official version.
-
-You can also obtain this software in DOS-compatible "zip" archive format from
-the SimTel archives (ftp.coast.net:/SimTel/msdos/graphics/), or on CompuServe
-in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 "JPEG Tools".
-Again, these versions may sometimes lag behind the ftp.uu.net release.
-
-The JPEG FAQ (Frequently Asked Questions) article is a useful source of
-general information about JPEG.  It is updated constantly and therefore is
-not included in this distribution.  The FAQ is posted every two weeks to
-Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
-You can always obtain the latest version from the news.answers archive at
-rtfm.mit.edu.  By FTP, fetch /pub/usenet/news.answers/jpeg-faq/part1 and
-.../part2.  If you don't have FTP, send e-mail to mail-server@rtfm.mit.edu
+The JPEG FAQ (Frequently Asked Questions) article is a source of some
+general information about JPEG.
+It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
+and other news.answers archive sites, including the official news.answers
+archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
+If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu
 with body
 	send usenet/news.answers/jpeg-faq/part1
 	send usenet/news.answers/jpeg-faq/part2
 
 
-RELATED SOFTWARE
-================
+ACKNOWLEDGMENTS
+===============
 
-Numerous viewing and image manipulation programs now support JPEG.  (Quite a
-few of them use this library to do so.)  The JPEG FAQ described above lists
-some of the more popular free and shareware viewers, and tells where to
-obtain them on Internet.
+Thank to Juergen Bruder for providing me with a copy of the common DCT
+algorithm article, only to find out that I had come to the same result
+in a more direct and comprehensible way with a more generative approach.
 
-If you are on a Unix machine, we highly recommend Jef Poskanzer's free
-PBMPLUS image software, which provides many useful operations on PPM-format
-image files.  In particular, it can convert PPM images to and from a wide
-range of other formats.  You can obtain this package by FTP from ftp.x.org
-(contrib/pbmplus*.tar.Z) or ftp.ee.lbl.gov (pbmplus*.tar.Z).  There is also
-a newer update of this package called NETPBM, available from
-wuarchive.wustl.edu under directory /graphics/graphics/packages/NetPBM/.
-Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software
-is; you are likely to have difficulty making it work on any non-Unix machine.
+Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the
+ITU JPEG (Study Group 16) meeting in Geneva, Switzerland.
 
-A different free JPEG implementation, written by the PVRG group at Stanford,
-is available from havefun.stanford.edu in directory pub/jpeg.  This program
-is designed for research and experimentation rather than production use;
-it is slower, harder to use, and less portable than the IJG code, but it
-is easier to read and modify.  Also, the PVRG code supports lossless JPEG,
-which we do not.
+Thank to Thomas Wiegand and Gary Sullivan for inviting me to the
+Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland.
+
+Thank to John Korejwa and Massimo Ballerini for inviting me to
+fruitful consultations in Boston, MA and Milan, Italy.
+
+Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther
+Maier-Gerber, and Walter Stoeber for corresponding business development.
+
+Thank to Nico Zschach and Dirk Stelling of the technical support team
+at the Digital Images company in Halle for providing me with extra
+equipment for configuration tests.
+
+Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful
+communication about JPEG configuration in Sigma Photo Pro software.
+
+Thank to Andrew Finkenstadt for hosting the ijg.org site.
+
+Last but not least special thank to Thomas G. Lane for the original
+design and development of this singular software package.
 
 
 FILE FORMAT WARS
 ================
 
-Some JPEG programs produce files that are not compatible with our library.
-The root of the problem is that the ISO JPEG committee failed to specify a
-concrete file format.  Some vendors "filled in the blanks" on their own,
-creating proprietary formats that no one else could read.  (For example, none
-of the early commercial JPEG implementations for the Macintosh were able to
-exchange compressed files.)
-
-The file format we have adopted is called JFIF (see REFERENCES).  This format
-has been agreed to by a number of major commercial JPEG vendors, and it has
-become the de facto standard.  JFIF is a minimal or "low end" representation.
-We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF
-Technical Note #2) for "high end" applications that need to record a lot of
-additional data about an image.  TIFF/JPEG is fairly new and not yet widely
-supported, unfortunately.
-
-The upcoming JPEG Part 3 standard defines a file format called SPIFF.
-SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should
-be able to read the most common variant of SPIFF.  SPIFF has some technical
-advantages over JFIF, but its major claim to fame is simply that it is an
-official standard rather than an informal one.  At this point it is unclear
-whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto
-standard.  IJG intends to support SPIFF once the standard is frozen, but we
-have not decided whether it should become our default output format or not.
-(In any case, our decoder will remain capable of reading JFIF indefinitely.)
-
-Various proprietary file formats incorporating JPEG compression also exist.
-We have little or no sympathy for the existence of these formats.  Indeed,
+The ISO JPEG standards committee actually promotes different formats like
+"JPEG 2000" or "JPEG XR" which are incompatible with original DCT-based
+JPEG and which are based on faulty technologies.  IJG therefore does not
+and will not support such momentary mistakes (see REFERENCES).
+We have little or no sympathy for the promotion of these formats.  Indeed,
 one of the original reasons for developing this free software was to help
-force convergence on common, open format standards for JPEG files.  Don't
-use a proprietary file format!
+force convergence on common, interoperable format standards for JPEG files.
+Don't use an incompatible file format!
+(In any case, our decoder will remain capable of reading existing JPEG
+image files indefinitely.)
 
 
 TO DO
 =====
 
-In future versions, we are considering supporting some of the upcoming JPEG
-Part 3 extensions --- principally, variable quantization and the SPIFF file
-format.
+Version 8 is the first release of a new generation JPEG standard
+to overcome the limitations of the original JPEG specification.
+More features are being prepared for coming releases...
 
-Tuning the software for better behavior at low quality/high compression
-settings is also of interest.  The current method for scaling the
-quantization tables is known not to be very good at low Q values.
-
-As always, speeding things up is high on our priority list.
-
-Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net.
+Please send bug reports, offers of help, etc. to jpeg-info@uc.ag.

ansi2knr.c

@@ -1,4 +1,6 @@
-/* ansi2knr.c */
+/* Copyright (C) 1989, 2000 Aladdin Enterprises.  All rights reserved. */
+
+/*$Id: ansi2knr.c,v 1.14 2003/09/06 05:36:56 eggert Exp $*/
 /* Convert ANSI C function definitions to K&R ("traditional C") syntax */
 
 /*
@@ -11,10 +13,10 @@ License (the "GPL") for full details.
 Everyone is granted permission to copy, modify and redistribute ansi2knr,
 but only under the conditions described in the GPL.  A copy of this license
 is supposed to have been given to you along with ansi2knr so you can know
-your rights and responsibilities.  It should be in a file named COPYLEFT.
-[In the IJG distribution, the GPL appears below, not in a separate file.]
-Among other things, the copyright notice and this notice must be preserved
-on all copies.
+your rights and responsibilities.  It should be in a file named COPYLEFT,
+or, if there is no file named COPYLEFT, a file named COPYING.  Among other
+things, the copyright notice and this notice must be preserved on all
+copies.
 
 We explicitly state here what we believe is already implied by the GPL: if
 the ansi2knr program is distributed as a separate set of sources and a
@@ -25,205 +27,105 @@ constructing it invoke the ansi2knr executable bring any other part of the
 program under the GPL.
 */
 
-/*
----------- Here is the GNU GPL file COPYLEFT, referred to above ----------
------ These terms do NOT apply to the JPEG software itself; see README ------
-
-		    GHOSTSCRIPT GENERAL PUBLIC LICENSE
-		    (Clarified 11 Feb 1988)
-
- Copyright (C) 1988 Richard M. Stallman
- Everyone is permitted to copy and distribute verbatim copies of this
- license, but changing it is not allowed.  You can also use this wording
- to make the terms for other programs.
-
-  The license agreements of most software companies keep you at the
-mercy of those companies.  By contrast, our general public license is
-intended to give everyone the right to share Ghostscript.  To make sure
-that you get the rights we want you to have, we need to make
-restrictions that forbid anyone to deny you these rights or to ask you
-to surrender the rights.  Hence this license agreement.
-
-  Specifically, we want to make sure that you have the right to give
-away copies of Ghostscript, that you receive source code or else can get
-it if you want it, that you can change Ghostscript or use pieces of it
-in new free programs, and that you know you can do these things.
-
-  To make sure that everyone has such rights, we have to forbid you to
-deprive anyone else of these rights.  For example, if you distribute
-copies of Ghostscript, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must tell them their rights.
-
-  Also, for our own protection, we must make certain that everyone finds
-out that there is no warranty for Ghostscript.  If Ghostscript is
-modified by someone else and passed on, we want its recipients to know
-that what they have is not what we distributed, so that any problems
-introduced by others will not reflect on our reputation.
-
-  Therefore we (Richard M. Stallman and the Free Software Foundation,
-Inc.) make the following terms which say what you must do to be allowed
-to distribute or change Ghostscript.
-
-
-			COPYING POLICIES
-
-  1. You may copy and distribute verbatim copies of Ghostscript source
-code as you receive it, in any medium, provided that you conspicuously
-and appropriately publish on each copy a valid copyright and license
-notice "Copyright (C) 1989 Aladdin Enterprises.  All rights reserved.
-Distributed by Free Software Foundation, Inc." (or with whatever year is
-appropriate); keep intact the notices on all files that refer to this
-License Agreement and to the absence of any warranty; and give any other
-recipients of the Ghostscript program a copy of this License Agreement
-along with the program.  You may charge a distribution fee for the
-physical act of transferring a copy.
-
-  2. You may modify your copy or copies of Ghostscript or any portion of
-it, and copy and distribute such modifications under the terms of
-Paragraph 1 above, provided that you also do the following:
-
-    a) cause the modified files to carry prominent notices stating
-    that you changed the files and the date of any change; and
-
-    b) cause the whole of any work that you distribute or publish,
-    that in whole or in part contains or is a derivative of Ghostscript
-    or any part thereof, to be licensed at no charge to all third
-    parties on terms identical to those contained in this License
-    Agreement (except that you may choose to grant more extensive
-    warranty protection to some or all third parties, at your option).
-
-    c) You may charge a distribution fee for the physical act of
-    transferring a copy, and you may at your option offer warranty
-    protection in exchange for a fee.
-
-Mere aggregation of another unrelated program with this program (or its
-derivative) on a volume of a storage or distribution medium does not bring
-the other program under the scope of these terms.
-
-  3. You may copy and distribute Ghostscript (or a portion or derivative
-of it, under Paragraph 2) in object code or executable form under the
-terms of Paragraphs 1 and 2 above provided that you also do one of the
-following:
-
-    a) accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of
-    Paragraphs 1 and 2 above; or,
-
-    b) accompany it with a written offer, valid for at least three
-    years, to give any third party free (except for a nominal
-    shipping charge) a complete machine-readable copy of the
-    corresponding source code, to be distributed under the terms of
-    Paragraphs 1 and 2 above; or,
-
-    c) accompany it with the information you received as to where the
-    corresponding source code may be obtained.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form alone.)
-
-For an executable file, complete source code means all the source code for
-all modules it contains; but, as a special exception, it need not include
-source code for modules which are standard libraries that accompany the
-operating system on which the executable file runs.
-
-  4. You may not copy, sublicense, distribute or transfer Ghostscript
-except as expressly provided under this License Agreement.  Any attempt
-otherwise to copy, sublicense, distribute or transfer Ghostscript is
-void and your rights to use the program under this License agreement
-shall be automatically terminated.  However, parties who have received
-computer software programs from you with this License Agreement will not
-have their licenses terminated so long as such parties remain in full
-compliance.
-
-  5. If you wish to incorporate parts of Ghostscript into other free
-programs whose distribution conditions are different, write to the Free
-Software Foundation at 675 Mass Ave, Cambridge, MA 02139.  We have not
-yet worked out a simple rule that can be stated here, but we will often
-permit this.  We will be guided by the two goals of preserving the free
-status of all derivatives of our free software and of promoting the
-sharing and reuse of software.
-
-Your comments and suggestions about our licensing policies and our
-software are welcome!  Please contact the Free Software Foundation,
-Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296.
-
-		       NO WARRANTY
-
-  BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
-NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW.  EXCEPT
-WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD
-M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER PARTIES
-PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
-EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE
-ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH
-YOU.  SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
-NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
-STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN
-ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE
-GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
-ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
-(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
-INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE
-PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU
-HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
-BY ANY OTHER PARTY.
-
--------------------- End of file COPYLEFT ------------------------------
-*/
-
 /*
  * Usage:
-	ansi2knr input_file [output_file]
+	ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]
+ * --filename provides the file name for the #line directive in the output,
+ * overriding input_file (if present).
+ * If no input_file is supplied, input is read from stdin.
  * If no output_file is supplied, output goes to stdout.
  * There are no error messages.
  *
  * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis,
- * with a right parenthesis as the last character on the line,
- * and with a left brace as the first token on the following line
- * (ignoring possible intervening comments).
- * It will recognize a multi-line header provided that no intervening
- * line ends with a left or right brace or a semicolon.
- * These algorithms ignore whitespace and comments, except that
- * the function name must be the first thing on the line.
- * The following constructs will confuse it:
+ * identifier at the left margin, followed by a left parenthesis, with a
+ * right parenthesis as the last character on the line, and with a left
+ * brace as the first token on the following line (ignoring possible
+ * intervening comments and/or preprocessor directives), except that a line
+ * consisting of only
+ *	identifier1(identifier2)
+ * will not be considered a function definition unless identifier2 is
+ * the word "void", and a line consisting of
+ *	identifier1(identifier2, <<arbitrary>>)
+ * will not be considered a function definition.
+ * ansi2knr will recognize a multi-line header provided that no intervening
+ * line ends with a left or right brace or a semicolon.  These algorithms
+ * ignore whitespace, comments, and preprocessor directives, except that
+ * the function name must be the first thing on the line.  The following
+ * constructs will confuse it:
  *	- Any other construct that starts at the left margin and
  *	    follows the above syntax (such as a macro or function call).
- *	- Some macros that tinker with the syntax of the function header.
+ *	- Some macros that tinker with the syntax of function headers.
  */
 
 /*
  * The original and principal author of ansi2knr is L. Peter Deutsch
  * <ghost@aladdin.com>.  Other authors are noted in the change history
  * that follows (in reverse chronological order):
-	lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
+
+	lpd 2000-04-12 backs out Eggert's changes because of bugs:
+	- concatlits didn't declare the type of its bufend argument;
+	- concatlits didn't recognize when it was inside a comment;
+	- scanstring could scan backward past the beginning of the string; when
+	- the check for \ + newline in scanstring was unnecessary.
+
+	2000-03-05  Paul Eggert  <eggert@twinsun.com>
+
+	Add support for concatenated string literals.
+	* ansi2knr.c (concatlits): New decl.
+	(main): Invoke concatlits to concatenate string literals.
+	(scanstring): Handle backslash-newline correctly.  Work with
+	character constants.  Fix bug when scanning backwards through
+	backslash-quote.  Check for unterminated strings.
+	(convert1): Parse character constants, too.
+	(appendline, concatlits): New functions.
+	* ansi2knr.1: Document this.
+
+	lpd 1999-08-17 added code to allow preprocessor directives
+		wherever comments are allowed
+	lpd 1999-04-12 added minor fixes from Pavel Roskin
+		<pavel_roskin@geocities.com> for clean compilation with
+		gcc -W -Wall
+	lpd 1999-03-22 added hack to recognize lines consisting of
+		identifier1(identifier2, xxx) as *not* being procedures
+	lpd 1999-02-03 made indentation of preprocessor commands consistent
+	lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an
+		endless loop; quoted strings within an argument list
+		confused the parser
+	lpd 1999-01-24 added a check for write errors on the output,
+		suggested by Jim Meyering <meyering@ascend.com>
+	lpd 1998-11-09 added further hack to recognize identifier(void)
+		as being a procedure
+	lpd 1998-10-23 added hack to recognize lines consisting of
+		identifier1(identifier2) as *not* being procedures
+	lpd 1997-12-08 made input_file optional; only closes input and/or
+		output file if not stdin or stdout respectively; prints
+		usage message on stderr rather than stdout; adds
+		--filename switch (changes suggested by
+		<ceder@lysator.liu.se>)
+	lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with
 		compilers that don't understand void, as suggested by
 		Tom Lane
-	lpd 96-01-15 changed to require that the first non-comment token
+	lpd 1996-01-15 changed to require that the first non-comment token
 		on the line following a function header be a left brace,
 		to reduce sensitivity to macros, as suggested by Tom Lane
 		<tgl@sss.pgh.pa.us>
-	lpd 95-06-22 removed #ifndefs whose sole purpose was to define
+	lpd 1995-06-22 removed #ifndefs whose sole purpose was to define
 		undefined preprocessor symbols as 0; changed all #ifdefs
 		for configuration symbols to #ifs
-	lpd 95-04-05 changed copyright notice to make it clear that
+	lpd 1995-04-05 changed copyright notice to make it clear that
 		including ansi2knr in a program does not bring the entire
 		program under the GPL
-	lpd 94-12-18 added conditionals for systems where ctype macros
+	lpd 1994-12-18 added conditionals for systems where ctype macros
 		don't handle 8-bit characters properly, suggested by
 		Francois Pinard <pinard@iro.umontreal.ca>;
 		removed --varargs switch (this is now the default)
-	lpd 94-10-10 removed CONFIG_BROKETS conditional
-	lpd 94-07-16 added some conditionals to help GNU `configure',
+	lpd 1994-10-10 removed CONFIG_BROKETS conditional
+	lpd 1994-07-16 added some conditionals to help GNU `configure',
 		suggested by Francois Pinard <pinard@iro.umontreal.ca>;
 		properly erase prototype args in function parameters,
 		contributed by Jim Avera <jima@netcom.com>;
 		correct error in writeblanks (it shouldn't erase EOLs)
-	lpd 89-xx-xx original version
+	lpd 1989-xx-xx original version
  */
 
 /* Most of the conditionals here are to make ansi2knr work with */
@@ -286,6 +188,11 @@ BY ANY OTHER PARTY.
 
 #endif
 
+/* Define NULL (for *very* old compilers). */
+#ifndef NULL
+# define NULL (0)
+#endif
+
 /*
  * The ctype macros don't always handle 8-bit characters correctly.
  * Compensate for this here.
@@ -310,7 +217,10 @@ BY ANY OTHER PARTY.
 #define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
 
 /* Forward references */
+char *ppdirforward();
+char *ppdirbackward();
 char *skipspace();
+char *scanstring();
 int writeblanks();
 int test1();
 int convert1();
@@ -320,11 +230,17 @@ int
 main(argc, argv)
     int argc;
     char *argv[];
-{	FILE *in, *out;
+{	FILE *in = stdin;
+	FILE *out = stdout;
+	char *filename = 0;
+	char *program_name = argv[0];
+	char *output_name = 0;
 #define bufsize 5000			/* arbitrary size */
 	char *buf;
 	char *line;
 	char *more;
+	char *usage =
+	  "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n";
 	/*
 	 * In previous versions, ansi2knr recognized a --varargs switch.
 	 * If this switch was supplied, ansi2knr would attempt to convert
@@ -334,40 +250,61 @@ main(argc, argv)
 	 * check for this switch for backward compatibility.
 	 */
 	int convert_varargs = 1;
+	int output_error;
 
-	if ( argc > 1 && argv[1][0] == '-' )
-	  {	if ( !strcmp(argv[1], "--varargs") )
-		  {	convert_varargs = 1;
+	while ( argc > 1 && argv[1][0] == '-' ) {
+	  if ( !strcmp(argv[1], "--varargs") ) {
+	    convert_varargs = 1;
 	    argc--;
 	    argv++;
+	    continue;
 	  }
-		else
-		  {	fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
+	  if ( !strcmp(argv[1], "--filename") && argc > 2 ) {
+	    filename = argv[2];
+	    argc -= 2;
+	    argv += 2;
+	    continue;
+	  }
+	  fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name,
+		  argv[1]);
+	  fprintf(stderr, usage);
 	  exit(1);
 	}
-	  }
 	switch ( argc )
 	   {
 	default:
-		printf("Usage: ansi2knr input_file [output_file]\n");
+		fprintf(stderr, usage);
 		exit(0);
-	case 2:
-		out = stdout;
-		break;
 	case 3:
-		out = fopen(argv[2], "w");
-		if ( out == NULL )
-		   {	fprintf(stderr, "Cannot open output file %s\n", argv[2]);
+		output_name = argv[2];
+		out = fopen(output_name, "w");
+		if ( out == NULL ) {
+		  fprintf(stderr, "%s: Cannot open output file %s\n",
+			  program_name, output_name);
 		  exit(1);
 		}
-	   }
+		/* falls through */
+	case 2:
 		in = fopen(argv[1], "r");
-	if ( in == NULL )
-	   {	fprintf(stderr, "Cannot open input file %s\n", argv[1]);
+		if ( in == NULL ) {
+		  fprintf(stderr, "%s: Cannot open input file %s\n",
+			  program_name, argv[1]);
 		  exit(1);
 		}
-	fprintf(out, "#line 1 \"%s\"\n", argv[1]);
+		if ( filename == 0 )
+		  filename = argv[1];
+		/* falls through */
+	case 1:
+		break;
+	   }
+	if ( filename )
+	  fprintf(out, "#line 1 \"%s\"\n", filename);
 	buf = malloc(bufsize);
+	if ( buf == NULL )
+	   {
+		fprintf(stderr, "Unable to allocate read buffer!\n");
+		exit(1);
+	   }
 	line = buf;
 	while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
 	   {
@@ -384,7 +321,7 @@ f:			if ( line >= buf + (bufsize - 1) ) /* overflow check */
 			  goto wl;
 			if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
 			  goto wl;
-			switch ( *skipspace(more, 1) )
+			switch ( *skipspace(ppdirforward(more), 1) )
 			  {
 			  case '{':
 			    /* Definitely a function header. */
@@ -418,24 +355,74 @@ wl:			fputs(buf, out);
 	if ( line != buf )
 	  fputs(buf, out);
 	free(buf);
-	fclose(out);
+	if ( output_name ) {
+	  output_error = ferror(out);
+	  output_error |= fclose(out);
+	} else {		/* out == stdout */
+	  fflush(out);
+	  output_error = ferror(out);
+	}
+	if ( output_error ) {
+	  fprintf(stderr, "%s: error writing to %s\n", program_name,
+		  (output_name ? output_name : "stdout"));
+	  exit(1);
+	}
+	if ( in != stdin )
 	  fclose(in);
 	return 0;
 }
 
-/* Skip over space and comments, in either direction. */
+/*
+ * Skip forward or backward over one or more preprocessor directives.
+ */
+char *
+ppdirforward(p)
+    char *p;
+{
+    for (; *p == '#'; ++p) {
+	for (; *p != '\r' && *p != '\n'; ++p)
+	    if (*p == 0)
+		return p;
+	if (*p == '\r' && p[1] == '\n')
+	    ++p;
+    }
+    return p;
+}
+char *
+ppdirbackward(p, limit)
+    char *p;
+    char *limit;
+{
+    char *np = p;
+
+    for (;; p = --np) {
+	if (*np == '\n' && np[-1] == '\r')
+	    --np;
+	for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np)
+	    if (np[-1] == 0)
+		return np;
+	if (*np != '#')
+	    return p;
+    }
+}
+
+/*
+ * Skip over whitespace, comments, and preprocessor directives,
+ * in either direction.
+ */
 char *
 skipspace(p, dir)
-    register char *p;
-    register int dir;			/* 1 for forward, -1 for backward */
-{	for ( ; ; )
-	   {	while ( is_space(*p) )
+    char *p;
+    int dir;			/* 1 for forward, -1 for backward */
+{
+    for ( ; ; ) {
+	while ( is_space(*p) )
 	    p += dir;
 	if ( !(*p == '/' && p[dir] == '*') )
 	    break;
 	p += dir;  p += dir;
-		while ( !(*p == '*' && p[dir] == '/') )
-		   {	if ( *p == 0 )
+	while ( !(*p == '*' && p[dir] == '/') ) {
+	    if ( *p == 0 )
 		return p;	/* multi-line comment?? */
 	    p += dir;
 	}
@@ -444,6 +431,17 @@ skipspace(p, dir)
     return p;
 }
 
+/* Scan over a quoted string, in either direction. */
+char *
+scanstring(p, dir)
+    char *p;
+    int dir;
+{
+    for (p += dir; ; p += dir)
+	if (*p == '"' && p[-dir] != '\\')
+	    return p + dir;
+}
+
 /*
  * Write blanks over part of a string.
  * Don't overwrite end-of-line characters.
@@ -475,14 +473,14 @@ writeblanks(start, end)
 int
 test1(buf)
     char *buf;
-{	register char *p = buf;
+{	char *p = buf;
 	char *bend;
 	char *endfn;
 	int contin;
 
 	if ( !isidfirstchar(*p) )
 	  return 0;		/* no name at left margin */
-	bend = skipspace(buf + strlen(buf) - 1, -1);
+	bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1);
 	switch ( *bend )
 	   {
 	   case ';': contin = 0 /*2*/; break;
@@ -512,7 +510,7 @@ test1(buf)
 		   };
 		char **key = words;
 		char *kp;
-		int len = endfn - buf;
+		unsigned len = endfn - buf;
 
 		while ( (kp = *key) != 0 )
 		   {	if ( strlen(kp) == len && !strncmp(kp, buf, len) )
@@ -520,6 +518,36 @@ test1(buf)
 			key++;
 		   }
 	   }
+	   {
+	       char *id = p;
+	       int len;
+	       /*
+		* Check for identifier1(identifier2) and not
+		* identifier1(void), or identifier1(identifier2, xxxx).
+		*/
+
+	       while ( isidchar(*p) )
+		   p++;
+	       len = p - id;
+	       p = skipspace(p, 1);
+	       if (*p == ',' ||
+		   (*p == ')' && (len != 4 || strncmp(id, "void", 4)))
+		   )
+		   return 0;	/* not a function */
+	   }
+	/*
+	 * If the last significant character was a ), we need to count
+	 * parentheses, because it might be part of a formal parameter
+	 * that is a procedure.
+	 */
+	if (contin > 0) {
+	    int level = 0;
+
+	    for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1))
+		level += (*p == '(' ? 1 : *p == ')' ? -1 : 0);
+	    if (level > 0)
+		contin = -1;
+	}
 	return contin;
 }
 
@@ -531,7 +559,11 @@ convert1(buf, out, header, convert_varargs)
     int header;			/* Boolean */
     int convert_varargs;	/* Boolean */
 {	char *endfn;
-	register char *p;
+	char *p;
+	/*
+	 * The breaks table contains pointers to the beginning and end
+	 * of each argument.
+	 */
 	char **breaks;
 	unsigned num_breaks = 2;	/* for testing */
 	char **btop;
@@ -545,7 +577,7 @@ convert1(buf, out, header, convert_varargs)
 	  ;
 top:	p = endfn;
 	breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
-	if ( breaks == 0 )
+	if ( breaks == NULL )
 	   {	/* Couldn't allocate break table, give up */
 		fprintf(stderr, "Unable to allocate break table!\n");
 		fputs(buf, out);
@@ -557,7 +589,7 @@ top:	p = endfn;
 	do
 	   {	int level = 0;
 		char *lp = NULL;
-		char *rp;
+		char *rp = NULL;
 		char *end = NULL;
 
 		if ( bp >= btop )
@@ -584,14 +616,18 @@ top:	p = endfn;
 				else rp = p;
 				break;
 			   case '/':
+				if (p[1] == '*')
 				    p = skipspace(p, 1) - 1;
 				break;
+			   case '"':
+			       p = scanstring(p, 1) - 1;
+			       break;
 			   default:
 				;
 			   }
 		   }
 		/* Erase any embedded prototype parameters. */
-		if ( lp )
+		if ( lp && rp )
 		  writeblanks(lp + 1, rp);
 		p--;			/* back up over terminator */
 		/* Find the name being declared. */
@@ -607,9 +643,19 @@ top:	p = endfn;
 				while ( level )
 				 switch ( *--p )
 				   {
-				   case ']': case ')': level++; break;
-				   case '[': case '(': level--; break;
-				   case '/': p = skipspace(p, -1) + 1; break;
+				   case ']': case ')':
+				       level++;
+				       break;
+				   case '[': case '(':
+				       level--;
+				       break;
+				   case '/':
+				       if (p > buf && p[-1] == '*')
+					   p = skipspace(p, -1) + 1;
+				       break;
+				   case '"':
+				       p = scanstring(p, -1) + 1;
+				       break;
 				   default: ;
 				   }
 			   }

cderror.h

@@ -1,7 +1,8 @@
 /*
  * cderror.h
  *
- * Copyright (C) 1994, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -45,6 +46,7 @@ JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
 JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
 JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
 JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
+JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image")
 JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
 JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
 JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
@@ -72,7 +74,7 @@ JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
 #ifdef PPM_SUPPORTED
 JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
 JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
-JMESSAGE(JERR_PPM_NOT, "Not a PPM file")
+JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
 JMESSAGE(JTRC_PGM, "%ux%u PGM image")
 JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
 JMESSAGE(JTRC_PPM, "%ux%u PPM image")

cdjpeg.c

@@ -1,7 +1,7 @@
 /*
  * cdjpeg.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -47,7 +47,9 @@ GLOBAL(void)
 enable_signal_catcher (j_common_ptr cinfo)
 {
   sig_cinfo = cinfo;
+#ifdef SIGINT			/* not all systems have SIGINT */
   signal(SIGINT, signal_catcher);
+#endif
 #ifdef SIGTERM			/* not all systems have SIGTERM */
   signal(SIGTERM, signal_catcher);
 #endif

cdjpeg.h

@@ -1,7 +1,7 @@
 /*
  * cdjpeg.h
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -104,6 +104,7 @@ typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
 #define jinit_write_targa	jIWrTarga
 #define read_quant_tables	RdQTables
 #define read_scan_script	RdScnScript
+#define set_quality_ratings     SetQRates
 #define set_quant_slots		SetQSlots
 #define set_sample_factors	SetSFacts
 #define read_color_map		RdCMap
@@ -131,8 +132,10 @@ EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
 /* cjpeg support routines (in rdswitch.c) */
 
 EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
-				    int scale_factor, boolean force_baseline));
+				       boolean force_baseline));
 EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
+EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg,
+					 boolean force_baseline));
 EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
 EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
 
@@ -156,9 +159,14 @@ EXTERN(FILE *) write_stdout JPP((void));
 #define READ_BINARY	"r"
 #define WRITE_BINARY	"w"
 #else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define WRITE_BINARY	"wb", "ctx=stm"
+#else				/* standard ANSI-compliant case */
 #define READ_BINARY	"rb"
 #define WRITE_BINARY	"wb"
 #endif
+#endif
 
 #ifndef EXIT_FAILURE		/* define exit() codes if not provided */
 #define EXIT_FAILURE  1

change.log

@@ -1,6 +1,156 @@
 CHANGE LOG for Independent JPEG Group's JPEG software
 
 
+Version 8a  28-Feb-2010
+-----------------------
+
+Writing tables-only datastreams via jpeg_write_tables works again.
+
+Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg.
+Thank to Brett Blackham for the suggestion.
+
+Improve accuracy in floating point IDCT calculation.
+Thank to Robert Hooke for the hint.
+
+
+Version 8  10-Jan-2010
+----------------------
+
+jpegtran now supports the same -scale option as djpeg for "lossless" resize.
+An implementation of the JPEG SmartScale extension is required for this
+feature.  A (draft) specification of the JPEG SmartScale extension is
+available as a contributed document at ITU and ISO.  Revision 2 or later
+of the document is required (latest document version is Revision 3).
+The SmartScale extension will enable more features beside lossless resize
+in future implementations, as described in the document (new compression
+options).
+
+Add sanity check in BMP reader module to avoid cjpeg crash for empty input
+image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error).
+
+Add data source and destination managers for read from and write to
+memory buffers.  New API functions jpeg_mem_src and jpeg_mem_dest.
+Thank to Roberto Boni from Italy for the suggestion.
+
+
+Version 7  27-Jun-2009
+----------------------
+
+New scaled DCTs implemented.
+djpeg now supports scalings N/8 with all N from 1 to 16.
+cjpeg now supports scalings 8/N with all N from 1 to 16.
+Scaled DCTs with size larger than 8 are now also used for resolving the
+common 2x2 chroma subsampling case without additional spatial resampling.
+Separate spatial resampling for those kind of files is now only necessary
+for N>8 scaling cases.
+Furthermore, separate scaled DCT functions are provided for direct resolving
+of the common asymmetric subsampling cases (2x1 and 1x2) without additional
+spatial resampling.
+
+cjpeg -quality option has been extended for support of separate quality
+settings for luminance and chrominance (or in general, for every provided
+quantization table slot).
+New API function jpeg_default_qtables() and q_scale_factor array in library.
+
+Added -nosmooth option to cjpeg, complementary to djpeg.
+New variable "do_fancy_downsampling" in library, complement to fancy
+upsampling.  Fancy upsampling now uses direct DCT scaling with sizes
+larger than 8.  The old method is not reversible and has been removed.
+
+Support arithmetic entropy encoding and decoding.
+Added files jaricom.c, jcarith.c, jdarith.c.
+
+Straighten the file structure:
+Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h.
+
+jpegtran has a new "lossless" cropping feature.
+
+Implement -perfect option in jpegtran, new API function
+jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch)
+
+Better error messages for jpegtran fopen failure.
+(DP 203_jpegtran_errmsg.dpatch)
+
+Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c:
+according to Netpbm, the de facto standard implementation of the PNM formats,
+the most significant byte is first. (DP 203_rdppm.dpatch)
+
+Add -raw option to rdjpgcom not to mangle the output.
+(DP 205_rdjpgcom_raw.dpatch)
+
+Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch)
+
+Add extern "C" to jpeglib.h.
+This avoids the need to put extern "C" { ... } around #include "jpeglib.h"
+in your C++ application.  Defining the symbol DONT_USE_EXTERN_C in the
+configuration prevents this. (DP 202_jpeglib.h_c++.dpatch)
+
+
+Version 6b  27-Mar-1998
+-----------------------
+
+jpegtran has new features for lossless image transformations (rotation
+and flipping) as well as "lossless" reduction to grayscale.
+
+jpegtran now copies comments by default; it has a -copy switch to enable
+copying all APPn blocks as well, or to suppress comments.  (Formerly it
+always suppressed comments and APPn blocks.)  jpegtran now also preserves
+JFIF version and resolution information.
+
+New decompressor library feature: COM and APPn markers found in the input
+file can be saved in memory for later use by the application.  (Before,
+you had to code this up yourself with a custom marker processor.)
+
+There is an unused field "void * client_data" now in compress and decompress
+parameter structs; this may be useful in some applications.
+
+JFIF version number information is now saved by the decoder and accepted by
+the encoder.  jpegtran uses this to copy the source file's version number,
+to ensure "jpegtran -copy all" won't create bogus files that contain JFXX
+extensions but claim to be version 1.01.  Applications that generate their
+own JFXX extension markers also (finally) have a supported way to cause the
+encoder to emit JFIF version number 1.02.
+
+djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather
+than as unknown APP0 markers.
+
+In -verbose mode, djpeg and rdjpgcom will try to print the contents of
+APP12 markers as text.  Some digital cameras store useful text information
+in APP12 markers.
+
+Handling of truncated data streams is more robust: blocks beyond the one in
+which the error occurs will be output as uniform gray, or left unchanged
+if decoding a progressive JPEG.  The appearance no longer depends on the
+Huffman tables being used.
+
+Huffman tables are checked for validity much more carefully than before.
+
+To avoid the Unisys LZW patent, djpeg's GIF output capability has been
+changed to produce "uncompressed GIFs", and cjpeg's GIF input capability
+has been removed altogether.  We're not happy about it either, but there
+seems to be no good alternative.
+
+The configure script now supports building libjpeg as a shared library
+on many flavors of Unix (all the ones that GNU libtool knows how to
+build shared libraries for).  Use "./configure --enable-shared" to
+try this out.
+
+New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio.
+Also, a jconfig file and a build script for Metrowerks CodeWarrior
+on Apple Macintosh.  makefile.dj has been updated for DJGPP v2, and there
+are miscellaneous other minor improvements in the makefiles.
+
+jmemmac.c now knows how to create temporary files following Mac System 7
+conventions.
+
+djpeg's -map switch is now able to read raw-format PPM files reliably.
+
+cjpeg -progressive -restart no longer generates any unnecessary DRI markers.
+
+Multiple calls to jpeg_simple_progression for a single JPEG object
+no longer leak memory.
+
+
 Version 6a  7-Feb-96
 --------------------
 

cjpeg.1

@@ -1,4 +1,4 @@
-.TH CJPEG 1 "15 June 1995"
+.TH CJPEG 1 "30 December 2009"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -16,7 +16,7 @@ cjpeg \- compress an image file to a JPEG file
 compresses the named image file, or the standard input if no file is
 named, and produces a JPEG/JFIF file on the standard output.
 The currently supported input file formats are: PPM (PBMPLUS color
-format), PGM (PBMPLUS gray-scale format), BMP, GIF, Targa, and RLE (Utah Raster
+format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
 Toolkit format).  (RLE is supported only if the URT library is available.)
 .SH OPTIONS
 All switch names may be abbreviated; for example,
@@ -27,24 +27,24 @@ or
 .BR \-gr .
 Most of the "basic" switches can be abbreviated to as little as one letter.
 Upper and lower case are equivalent (thus
-.B \-GIF
+.B \-BMP
 is the same as
-.BR \-gif ).
+.BR \-bmp ).
 British spellings are also accepted (e.g.,
 .BR \-greyscale ),
 though for brevity these are not mentioned below.
 .PP
 The basic switches are:
 .TP
-.BI \-quality " N"
+.BI \-quality " N[,...]"
 Scale quantization tables to adjust image quality.  Quality is 0 (worst) to
 100 (best); default is 75.  (See below for more info.)
 .TP
 .B \-grayscale
 Create monochrome JPEG file from color input.  Be sure to use this switch when
-compressing a grayscale GIF file, because
+compressing a grayscale BMP file, because
 .B cjpeg
-isn't bright enough to notice whether a GIF file uses only shades of gray.
+isn't bright enough to notice whether a BMP file uses only shades of gray.
 By saying
 .BR \-grayscale ,
 you'll get a smaller JPEG file that takes less time to process.
@@ -62,6 +62,10 @@ decompression are unaffected by
 .B \-progressive
 Create progressive JPEG file (see below).
 .TP
+.BI \-scale " M/N"
+Scale the output image by a factor M/N.  Currently supported scale factors are
+8/N with all N from 1 to 16.
+.TP
 .B \-targa
 Input file is Targa format.  Targa files that contain an "identification"
 field will not be automatically recognized by
@@ -109,6 +113,34 @@ other JPEG programs may be unable to decode the resulting file.  Use
 if you need to ensure compatibility at low quality values.)
 .PP
 The
+.B \-quality
+option has been extended in IJG version 7 for support of separate quality
+settings for luminance and chrominance (or in general, for every provided
+quantization table slot).  This feature is useful for high-quality
+applications which cannot accept the damage of color data by coarse
+subsampling settings.  You can now easily reduce the color data amount more
+smoothly with finer control without separate subsampling.  The resulting file
+is fully compliant with standard JPEG decoders.
+Note that the
+.B \-quality
+ratings refer to the quantization table slots, and that the last value is
+replicated if there are more q-table slots than parameters.  The default
+q-table slots are 0 for luminance and 1 for chrominance with default tables as
+given in the JPEG standard.  This is compatible with the old behaviour in case
+that only one parameter is given, which is then used for both luminance and
+chrominance (slots 0 and 1).  More or custom quantization tables can be set
+with
+.B \-qtables
+and assigned to components with
+.B \-qslots
+parameter (see the "wizard" switches below).
+.B Caution:
+You must explicitly add
+.BI \-sample " 1x1"
+for efficient separate color
+quality selection, since the default value used by library is 2x2!
+.PP
+The
 .B \-progressive
 switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
 is stored in multiple scans of increasing quality.  If the file is being
@@ -117,9 +149,6 @@ scan to display a low-quality image very quickly, and can then improve the
 display with each subsequent scan.  The final image is exactly equivalent to a
 standard JPEG file of the same quality setting, and the total file size is
 about the same --- often a little smaller.
-.B Caution:
-progressive JPEG is not yet widely implemented, so many decoders will be
-unable to view a progressive JPEG file at all.
 .PP
 Switches for advanced users:
 .TP
@@ -137,6 +166,9 @@ note that results of the floating-point method may vary slightly across
 machines, while the integer methods should give the same results everywhere.
 The fast integer method is much less accurate than the other two.
 .TP
+.B \-nosmooth
+Don't use high-quality downsampling.
+.TP
 .BI \-restart " N"
 Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
 attached to the number.
@@ -180,16 +212,28 @@ for images that will be transmitted across unreliable networks such as Usenet.
 The
 .B \-smooth
 option filters the input to eliminate fine-scale noise.  This is often useful
-when converting GIF files to JPEG: a moderate smoothing factor of 10 to 50
-gets rid of dithering patterns in the input file, resulting in a smaller JPEG
-file and a better-looking image.  Too large a smoothing factor will visibly
-blur the image, however.
+when converting dithered images to JPEG: a moderate smoothing factor of 10 to
+50 gets rid of dithering patterns in the input file, resulting in a smaller
+JPEG file and a better-looking image.  Too large a smoothing factor will
+visibly blur the image, however.
 .PP
 Switches for wizards:
 .TP
+.B \-arithmetic
+Use arithmetic coding.
+.B Caution:
+arithmetic coded JPEG is not yet widely implemented, so many decoders will be
+unable to view an arithmetic coded JPEG file at all.
+.TP
 .B \-baseline
-Force a baseline JPEG file to be generated.  This clamps quantization values
-to 8 bits even at low quality settings.
+Force baseline-compatible quantization tables to be generated.  This clamps
+quantization values to 8 bits even at low quality settings.  (This switch is
+poorly named, since it does not ensure that the output is actually baseline
+JPEG.  For example, you can use
+.B \-baseline
+and
+.B \-progressive
+together.)
 .TP
 .BI \-qtables " file"
 Use the quantization tables given in the specified text file.
@@ -205,7 +249,7 @@ Use the scan script given in the specified text file.
 .PP
 The "wizard" switches are intended for experimentation with JPEG.  If you
 don't know what you are doing, \fBdon't use them\fR.  These switches are
-documented further in the file wizard.doc.
+documented further in the file wizard.txt.
 .SH EXAMPLES
 .LP
 This example compresses the PPM file foo.ppm with a quality factor of
@@ -270,7 +314,8 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
+GIF input files are no longer supported, to avoid the Unisys LZW patent.
+(Conversion of GIF files to JPEG is usually a bad idea anyway.)
 .PP
 Not all variants of BMP and Targa file formats are supported.
 .PP
@@ -278,5 +323,3 @@ The
 .B \-targa
 switch is not a bug, it's a feature.  (It would be a bug if the Targa format
 designers had not been clueless.)
-.PP
-Still not as fast as we'd like.

cjpeg.c

@@ -1,7 +1,8 @@
 /*
  * cjpeg.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2008 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -149,7 +150,7 @@ usage (void)
 #endif
 
   fprintf(stderr, "Switches (names may be abbreviated):\n");
-  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -quality N[,...]   Compression quality (0..100; 5-95 is useful range)\n");
   fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
 #ifdef ENTROPY_OPT_SUPPORTED
   fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
@@ -157,6 +158,9 @@ usage (void)
 #ifdef C_PROGRESSIVE_SUPPORTED
   fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
 #endif
+#ifdef DCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -scale M/N     Scale image by fraction M/N, eg, 1/2\n");
+#endif
 #ifdef TARGA_SUPPORTED
   fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
 #endif
@@ -173,6 +177,7 @@ usage (void)
   fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
 	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
 #endif
+  fprintf(stderr, "  -nosmooth      Don't use high-quality downsampling\n");
   fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
 #ifdef INPUT_SMOOTHING_SUPPORTED
   fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
@@ -184,7 +189,7 @@ usage (void)
 #ifdef C_ARITH_CODING_SUPPORTED
   fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
 #endif
-  fprintf(stderr, "  -baseline      Force baseline output\n");
+  fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
   fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
   fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
   fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
@@ -209,21 +214,16 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 {
   int argn;
   char * arg;
-  int quality;			/* -quality parameter */
-  int q_scale_factor;		/* scaling percentage for -qtables */
   boolean force_baseline;
   boolean simple_progressive;
+  char * qualityarg = NULL;	/* saves -quality parm if any */
   char * qtablefile = NULL;	/* saves -qtables filename if any */
   char * qslotsarg = NULL;	/* saves -qslots parm if any */
   char * samplearg = NULL;	/* saves -sample parm if any */
   char * scansarg = NULL;	/* saves -scans parm if any */
 
   /* Set up default JPEG parameters. */
-  /* Note that default -quality level need not, and does not,
-   * match the default scaling for an explicit -qtables argument.
-   */
-  quality = 75;			/* default -quality value */
-  q_scale_factor = 100;		/* default to no scaling for -qtables */
+
   force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
   simple_progressive = FALSE;
   is_targa = FALSE;
@@ -255,7 +255,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 #endif
 
     } else if (keymatch(arg, "baseline", 1)) {
-      /* Force baseline output (8-bit quantizer values). */
+      /* Force baseline-compatible output (8-bit quantizer values). */
       force_baseline = TRUE;
 
     } else if (keymatch(arg, "dct", 2)) {
@@ -300,6 +300,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 	lval *= 1000L;
       cinfo->mem->max_memory_to_use = lval * 1000L;
 
+    } else if (keymatch(arg, "nosmooth", 3)) {
+      /* Suppress fancy downsampling */
+      cinfo->do_fancy_downsampling = FALSE;
+
     } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
       /* Enable entropy parm optimization. */
 #ifdef ENTROPY_OPT_SUPPORTED
@@ -328,13 +332,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 #endif
 
     } else if (keymatch(arg, "quality", 1)) {
-      /* Quality factor (quantization table scaling factor). */
+      /* Quality ratings (quantization table scaling factors). */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d", &quality) != 1)
-	usage();
-      /* Change scale factor in case -qtables is present. */
-      q_scale_factor = jpeg_quality_scaling(quality);
+      qualityarg = argv[argn];
 
     } else if (keymatch(arg, "qslots", 2)) {
       /* Quantization table slot numbers. */
@@ -382,7 +383,15 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
        * default sampling factors.
        */
 
-    } else if (keymatch(arg, "scans", 2)) {
+    } else if (keymatch(arg, "scale", 4)) {
+      /* Scale the image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d/%d",
+		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
+	usage();
+
+    } else if (keymatch(arg, "scans", 4)) {
       /* Set scan script. */
 #ifdef C_MULTISCAN_FILES_SUPPORTED
       if (++argn >= argc)	/* advance to next argument */
@@ -422,11 +431,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 
     /* Set quantization tables for selected quality. */
     /* Some or all may be overridden if -qtables is present. */
-    jpeg_set_quality(cinfo, quality, force_baseline);
+    if (qualityarg != NULL)	/* process -quality if it was present */
+      if (! set_quality_ratings(cinfo, qualityarg, force_baseline))
+	usage();
 
     if (qtablefile != NULL)	/* process -qtables if it was present */
-      if (! read_quant_tables(cinfo, qtablefile,
-			      q_scale_factor, force_baseline))
+      if (! read_quant_tables(cinfo, qtablefile, force_baseline))
 	usage();
 
     if (qslotsarg != NULL)	/* process -qslots if it was present */

ckconfig.c

@@ -301,7 +301,7 @@ int main (argc, argv)
 
   /* Write out all the info */
   fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n");
-  fprintf(outfile, "/* see jconfig.doc for explanations */\n\n");
+  fprintf(outfile, "/* see jconfig.txt for explanations */\n\n");
 #ifdef HAVE_PROTOTYPES
   fprintf(outfile, "#define HAVE_PROTOTYPES\n");
 #else

coderules.txt

@@ -103,7 +103,7 @@ should be in the common data structures.
 
 4. Don't use static variables except for read-only constant tables.  Variables
 that should be private to a module can be placed into private structures (see
-the system architecture document, structure.doc).
+the system architecture document, structure.txt).
 
 5. Source file names should begin with "j" for files that are part of the
 library proper; source files that are not part of the library, such as cjpeg.c

configure.ac

@@ -0,0 +1,317 @@
+# IJG auto-configuration source file.
+# Process this file with autoconf to produce a configure script.
+
+#
+# Configure script for IJG libjpeg
+#
+
+AC_INIT([libjpeg], [8.0.1])
+
+# Directory where autotools helper scripts lives.
+AC_CONFIG_AUX_DIR([.])
+
+# Generate configuration headers.
+AC_CONFIG_HEADERS([jconfig.h:jconfig.cfg])
+
+# Hack: disable autoheader so that it doesn't overwrite our cfg template.
+AUTOHEADER="echo autoheader ignored"
+
+# Check system type
+AC_CANONICAL_TARGET
+
+# Initialize Automake
+# Don't require all the GNU mandated files
+AM_INIT_AUTOMAKE([-Wall -Werror ansi2knr no-dist foreign])
+
+# Make --enable-silent-rules the default.
+# To get verbose build output you may configure
+# with --disable-silent-rules or use "make V=1".
+AM_SILENT_RULES([yes])
+
+# This is required when using the de-ANSI-fication feature.
+AM_C_PROTOTYPES
+
+# Add configure option --enable-maintainer-mode which enables
+# dependency checking and generation useful to package maintainers.
+# This is made an option to avoid confusing end users.
+AM_MAINTAINER_MODE
+
+# Check for programs
+AC_PROG_CC
+AC_PROG_CC_STDC
+AC_PROG_CPP
+AC_PROG_INSTALL
+AC_PROG_MAKE_SET
+AC_PROG_LN_S
+
+# Check if LD supports linker scripts,
+# and define automake conditional HAVE_LD_VERSION_SCRIPT if so.
+AC_ARG_ENABLE([ld-version-script],
+  AS_HELP_STRING([--enable-ld-version-script],
+    [enable linker version script (default is enabled when possible)]),
+    [have_ld_version_script=$enableval], [])
+if test -z "$have_ld_version_script"; then
+  AC_MSG_CHECKING([if LD -Wl,--version-script works])
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
+  cat > conftest.map <<EOF
+VERS_1 {
+        global: sym;
+};
+
+VERS_2 {
+        global: sym;
+} VERS_1;
+EOF
+  AC_LINK_IFELSE(AC_LANG_PROGRAM([], []),
+                 [have_ld_version_script=yes], [have_ld_version_script=no])
+  rm -f conftest.map
+  LDFLAGS="$save_LDFLAGS"
+  AC_MSG_RESULT($have_ld_version_script)
+fi
+AM_CONDITIONAL(HAVE_LD_VERSION_SCRIPT, test "$have_ld_version_script" = "yes")
+
+# See if compiler supports prototypes.
+AC_MSG_CHECKING(for function prototypes)
+AC_CACHE_VAL(ijg_cv_have_prototypes,
+[AC_TRY_COMPILE([
+int testfunction (int arg1, int * arg2); /* check prototypes */
+struct methods_struct {		/* check method-pointer declarations */
+  int (*error_exit) (char *msgtext);
+  int (*trace_message) (char *msgtext);
+  int (*another_method) (void);
+};
+int testfunction (int arg1, int * arg2) /* check definitions */
+{ return arg2[arg1]; }
+int test2function (void)	/* check void arg list */
+{ return 0; }
+], [ ], ijg_cv_have_prototypes=yes, ijg_cv_have_prototypes=no)])
+AC_MSG_RESULT($ijg_cv_have_prototypes)
+if test $ijg_cv_have_prototypes = yes; then
+  AC_DEFINE([HAVE_PROTOTYPES],[1],[Compiler supports function prototypes.])
+else
+  echo Your compiler does not seem to know about function prototypes.
+  echo Perhaps it needs a special switch to enable ANSI C mode.
+  echo If so, we recommend running configure like this:
+  echo "   ./configure  CC='cc -switch'"
+  echo where -switch is the proper switch.
+fi
+
+# Check header files
+AC_CHECK_HEADERS(stddef.h stdlib.h locale.h)
+AC_CHECK_HEADER(string.h, , AC_DEFINE([NEED_BSD_STRINGS],[1],[Compiler has <strings.h> rather than standard <string.h>.]))
+
+# See whether type size_t is defined in any ANSI-standard places;
+# if not, perhaps it is defined in <sys/types.h>.
+AC_MSG_CHECKING(for size_t)
+AC_TRY_COMPILE([
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
+#ifdef NEED_BSD_STRINGS
+#include <strings.h>
+#else
+#include <string.h>
+#endif
+typedef size_t my_size_t;
+], [ my_size_t foovar; ], ijg_size_t_ok=yes,
+[ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"])
+AC_MSG_RESULT($ijg_size_t_ok)
+if test "$ijg_size_t_ok" != yes; then
+AC_CHECK_HEADER(sys/types.h, [AC_DEFINE([NEED_SYS_TYPES_H],[1],[Need to include <sys/types.h> in order to obtain size_t.])
+AC_EGREP_CPP(size_t, [#include <sys/types.h>],
+[ijg_size_t_ok="size_t is in sys/types.h"], ijg_size_t_ok=no)],
+ijg_size_t_ok=no)
+AC_MSG_RESULT($ijg_size_t_ok)
+if test "$ijg_size_t_ok" = no; then
+  echo Type size_t is not defined in any of the usual places.
+  echo Try putting '"typedef unsigned int size_t;"' in jconfig.h.
+fi
+fi
+
+# Check compiler characteristics
+AC_MSG_CHECKING(for type unsigned char)
+AC_TRY_COMPILE(, [ unsigned char un_char; ],
+[AC_MSG_RESULT(yes)
+AC_DEFINE([HAVE_UNSIGNED_CHAR],[1],[Compiler supports 'unsigned char'.])], AC_MSG_RESULT(no))
+dnl
+AC_MSG_CHECKING(for type unsigned short)
+AC_TRY_COMPILE(, [ unsigned short un_short; ],
+[AC_MSG_RESULT(yes)
+AC_DEFINE([HAVE_UNSIGNED_SHORT],[1],[Compiler supports 'unsigned short'.])], AC_MSG_RESULT(no))
+dnl
+AC_MSG_CHECKING(for type void)
+AC_TRY_COMPILE([
+/* Caution: a C++ compiler will insist on valid prototypes */
+typedef void * void_ptr;	/* check void * */
+#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
+typedef void (*void_func) (int a, int b);
+#else
+typedef void (*void_func) ();
+#endif
+
+#ifdef HAVE_PROTOTYPES		/* check void function result */
+void test3function (void_ptr arg1, void_func arg2)
+#else
+void test3function (arg1, arg2)
+     void_ptr arg1;
+     void_func arg2;
+#endif
+{
+  char * locptr = (char *) arg1; /* check casting to and from void * */
+  arg1 = (void *) locptr;
+  (*arg2) (1, 2);		/* check call of fcn returning void */
+}
+], [ ], AC_MSG_RESULT(yes), [AC_MSG_RESULT(no)
+AC_DEFINE([void],[char],[Define 'void' as 'char' for archaic compilers that don't understand it.])])
+AC_C_CONST
+
+# Check for non-broken inline under various spellings
+AC_MSG_CHECKING(for inline)
+ijg_cv_inline=""
+AC_TRY_COMPILE(, [} __inline__ int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="__inline__",
+AC_TRY_COMPILE(, [} __inline int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="__inline",
+AC_TRY_COMPILE(, [} inline int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="inline")))
+AC_MSG_RESULT($ijg_cv_inline)
+AC_DEFINE_UNQUOTED([INLINE],[$ijg_cv_inline],[How to obtain function inlining.])
+
+# We cannot check for bogus warnings, but at least we can check for errors
+AC_MSG_CHECKING(for broken incomplete types)
+AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], ,
+AC_MSG_RESULT(ok),
+[AC_MSG_RESULT(broken)
+AC_DEFINE([INCOMPLETE_TYPES_BROKEN],[1],[Compiler does not support pointers to unspecified structures.])])
+
+# Test whether global names are unique to at least 15 chars
+AC_MSG_CHECKING(for short external names)
+AC_TRY_LINK([
+int possibly_duplicate_function () { return 0; }
+int possibly_dupli_function () { return 1; }
+], [ ], AC_MSG_RESULT(ok), [AC_MSG_RESULT(short)
+AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES],[1],[Linker requires that global names be unique in first 15 characters.])])
+
+# Run-time checks
+AC_MSG_CHECKING(to see if char is signed)
+AC_TRY_RUN([
+#ifdef HAVE_PROTOTYPES
+int is_char_signed (int arg)
+#else
+int is_char_signed (arg)
+     int arg;
+#endif
+{
+  if (arg == 189) {		/* expected result for unsigned char */
+    return 0;			/* type char is unsigned */
+  }
+  else if (arg != -67) {	/* expected result for signed char */
+    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
+    printf("I fear the JPEG software will not work at all.\n\n");
+  }
+  return 1;			/* assume char is signed otherwise */
+}
+char signed_char_check = (char) (-67);
+int main() {
+  exit(is_char_signed((int) signed_char_check));
+}], [AC_MSG_RESULT(no)
+AC_DEFINE([CHAR_IS_UNSIGNED],[1],[Characters are unsigned])], AC_MSG_RESULT(yes),
+[echo Assuming that char is signed on target machine.
+echo If it is unsigned, this will be a little bit inefficient.
+])
+dnl
+AC_MSG_CHECKING(to see if right shift is signed)
+AC_TRY_RUN([
+#ifdef HAVE_PROTOTYPES
+int is_shifting_signed (long arg)
+#else
+int is_shifting_signed (arg)
+     long arg;
+#endif
+/* See whether right-shift on a long is signed or not. */
+{
+  long res = arg >> 4;
+
+  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
+    return 1;			/* right shift is signed */
+  }
+  /* see if unsigned-shift hack will fix it. */
+  /* we can't just test exact value since it depends on width of long... */
+  res |= (~0L) << (32-4);
+  if (res == -0x7F7E80CL) {	/* expected result now? */
+    return 0;			/* right shift is unsigned */
+  }
+  printf("Right shift isn't acting as I expect it to.\n");
+  printf("I fear the JPEG software will not work at all.\n\n");
+  return 0;			/* try it with unsigned anyway */
+}
+int main() {
+  exit(is_shifting_signed(-0x7F7E80B1L));
+}], [AC_MSG_RESULT(no)
+AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED],[1],[Broken compiler shifts signed values as an unsigned shift.])], AC_MSG_RESULT(yes),
+AC_MSG_RESULT(Assuming that right shift is signed on target machine.))
+dnl
+AC_MSG_CHECKING(to see if fopen accepts b spec)
+AC_TRY_RUN([
+#include <stdio.h>
+int main() {
+  if (fopen("conftestdata", "wb") != NULL)
+    exit(0);
+  exit(1);
+}], AC_MSG_RESULT(yes), [AC_MSG_RESULT(no)
+AC_DEFINE([DONT_USE_B_MODE],[1],[Don't open files in binary mode.])],
+AC_MSG_RESULT(Assuming that it does.))
+
+# Configure libtool
+AC_LIBTOOL_WIN32_DLL
+AC_PROG_LIBTOOL
+
+# Select memory manager depending on user input.
+# If no "-enable-maxmem", use jmemnobs
+MEMORYMGR='jmemnobs'
+MAXMEM="no"
+AC_ARG_ENABLE(maxmem,
+[  --enable-maxmem[=N]     enable use of temp files, set max mem usage to N MB],
+MAXMEM="$enableval")
+dnl [# support --with-maxmem for backwards compatibility with IJG V5.]
+dnl AC_ARG_WITH(maxmem, , MAXMEM="$withval")
+if test "x$MAXMEM" = xyes; then
+  MAXMEM=1
+fi
+if test "x$MAXMEM" != xno; then
+  if test -n "`echo $MAXMEM | sed 's/[[0-9]]//g'`"; then
+    AC_MSG_ERROR(non-numeric argument to --enable-maxmem)
+  fi
+  DEFAULTMAXMEM=`expr $MAXMEM \* 1048576`
+AC_DEFINE_UNQUOTED([DEFAULT_MAX_MEM], [${DEFAULTMAXMEM}], [Maximum data space library will allocate.])
+AC_MSG_CHECKING([for 'tmpfile()'])
+AC_TRY_LINK([#include <stdio.h>], [ FILE * tfile = tmpfile(); ],
+[AC_MSG_RESULT(yes)
+MEMORYMGR='jmemansi'],
+[AC_MSG_RESULT(no)
+dnl if tmpfile is not present, must use jmemname.
+MEMORYMGR='jmemname'
+
+# Test for the need to remove temporary files using a signal handler (for cjpeg/djpeg)
+AC_DEFINE([NEED_SIGNAL_CATCHER],[1],[Need signal handler to clean up temporary files.])
+AC_MSG_CHECKING([for 'mktemp()'])
+AC_TRY_LINK(, [ char fname[80]; mktemp(fname); ], AC_MSG_RESULT(yes),
+[AC_MSG_RESULT(no)
+AC_DEFINE([NO_MKTEMP],[1],[The mktemp() function is not available.])])])
+fi
+AC_SUBST(MEMORYMGR)
+
+# Extract the library version ID from jpeglib.h.
+AC_MSG_CHECKING([libjpeg version number])
+[JPEG_LIB_VERSION=`sed -e '/^#define JPEG_LIB_VERSION/!d' -e 's/^[^0-9]*\([0-9][0-9]*\).*$/\1/' $srcdir/jpeglib.h`]
+[JPEG_LIB_VERSION="`expr $JPEG_LIB_VERSION / 10`:1"]
+AC_MSG_RESULT([$JPEG_LIB_VERSION])
+AC_SUBST([JPEG_LIB_VERSION])
+
+AC_CONFIG_FILES([Makefile])
+AC_OUTPUT

depcomp

@@ -0,0 +1,630 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2009-04-28.21; # UTC
+
+# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009 Free
+# Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+     echo "$0: No command.  Try \`$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by `PROGRAMS ARGS'.
+  object      Object file output by `PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputing dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+   # This is just like dashmstdout with a different argument.
+   dashmflag=-xM
+   depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+   # This is just like msvisualcpp but w/o cygpath translation.
+   # Just convert the backslash-escaped backslashes to single forward
+   # slashes to satisfy depend.m4
+   cygpath_u="sed s,\\\\\\\\,/,g"
+   depmode=msvisualcpp
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
+## The second -e expression handles DOS-style file names with drive letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the `deleted header file' problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+  tr ' ' '
+' < "$tmpdepfile" |
+## Some versions of gcc put a space before the `:'.  On the theory
+## that the space means something, we add a space to the output as
+## well.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like `#:fec' to the end of the
+    # dependency line.
+    tr ' ' '
+' < "$tmpdepfile" \
+    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
+    tr '
+' ' ' >> "$depfile"
+    echo >> "$depfile"
+
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' '
+' < "$tmpdepfile" \
+   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+   >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts `$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form `foo.o: dependent.h'.
+    # Do two passes, one to just change these to
+    # `$object: dependent.h' and one to simply `dependent.h:'.
+    sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+    # That's a tab and a space in the [].
+    sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+  else
+    # The sourcefile does not contain any dependencies, so just
+    # store a dummy comment line, to avoid errors with the Makefile
+    # "include basename.Plo" scheme.
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+icc)
+  # Intel's C compiler understands `-MD -MF file'.  However on
+  #    icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c
+  # ICC 7.0 will fill foo.d with something like
+  #    foo.o: sub/foo.c
+  #    foo.o: sub/foo.h
+  # which is wrong.  We want:
+  #    sub/foo.o: sub/foo.c
+  #    sub/foo.o: sub/foo.h
+  #    sub/foo.c:
+  #    sub/foo.h:
+  # ICC 7.1 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using \ :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
+    sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+  test "x$dir" = "x$object" && dir=
+  base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -eq 0; then :
+  else
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add `dependent.h:' lines.
+    sed -ne '2,${
+	       s/^ *//
+	       s/ \\*$//
+	       s/$/:/
+	       p
+	     }' "$tmpdepfile" >> "$depfile"
+  else
+    echo "#dummy" > "$depfile"
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+   # The Tru64 compiler uses -MD to generate dependencies as a side
+   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
+   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+   # dependencies in `foo.d' instead, so we check for that too.
+   # Subdirectories are respected.
+   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
+   test "x$dir" = "x$object" && dir=
+   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+
+   if test "$libtool" = yes; then
+      # With Tru64 cc, shared objects can also be used to make a
+      # static library.  This mechanism is used in libtool 1.4 series to
+      # handle both shared and static libraries in a single compilation.
+      # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
+      #
+      # With libtool 1.5 this exception was removed, and libtool now
+      # generates 2 separate objects for the 2 libraries.  These two
+      # compilations output dependencies in $dir.libs/$base.o.d and
+      # in $dir$base.o.d.  We have to check for both files, because
+      # one of the two compilations can be disabled.  We should prefer
+      # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+      # automatically cleaned when .libs/ is deleted, while ignoring
+      # the former would cause a distcleancheck panic.
+      tmpdepfile1=$dir.libs/$base.lo.d   # libtool 1.4
+      tmpdepfile2=$dir$base.o.d          # libtool 1.5
+      tmpdepfile3=$dir.libs/$base.o.d    # libtool 1.5
+      tmpdepfile4=$dir.libs/$base.d      # Compaq CCC V6.2-504
+      "$@" -Wc,-MD
+   else
+      tmpdepfile1=$dir$base.o.d
+      tmpdepfile2=$dir$base.d
+      tmpdepfile3=$dir$base.d
+      tmpdepfile4=$dir$base.d
+      "$@" -MD
+   fi
+
+   stat=$?
+   if test $stat -eq 0; then :
+   else
+      rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+      exit $stat
+   fi
+
+   for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
+   do
+     test -f "$tmpdepfile" && break
+   done
+   if test -f "$tmpdepfile"; then
+      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
+      # That's a tab and a space in the [].
+      sed -e 's,^.*\.[a-z]*:[	 ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
+   else
+      echo "#dummy" > "$depfile"
+   fi
+   rm -f "$tmpdepfile"
+   ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for `:'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise.
+  "$@" $dashmflag |
+    sed 's:^[  ]*[^: ][^:][^:]*\:[    ]*:'"$object"'\: :' > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  tr ' ' '
+' < "$tmpdepfile" | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  sed '1,2d' "$tmpdepfile" | tr ' ' '
+' | \
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove `-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E |
+    sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+       -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
+    sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+	set fnord "$@"
+	shift
+	shift
+	;;
+    *)
+	set fnord "$@" "$arg"
+	shift
+	shift
+	;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
+  echo "	" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

djpeg.1

@@ -1,4 +1,4 @@
-.TH DJPEG 1 "15 June 1995"
+.TH DJPEG 1 "3 October 2009"
 .SH NAME
 djpeg \- decompress a JPEG file to an image file
 .SH SYNOPSIS
@@ -26,9 +26,9 @@ or
 .BR \-gr .
 Most of the "basic" switches can be abbreviated to as little as one letter.
 Upper and lower case are equivalent (thus
-.B \-GIF
+.B \-BMP
 is the same as
-.BR \-gif ).
+.BR \-bmp ).
 British spellings are also accepted (e.g.,
 .BR \-greyscale ),
 though for brevity these are not mentioned below.
@@ -61,9 +61,12 @@ monochrome displays; also,
 runs noticeably faster in this mode.
 .TP
 .BI \-scale " M/N"
-Scale the output image by a factor M/N.  Currently the scale factor must be
-1/1, 1/2, 1/4, or 1/8.  Scaling is handy if the image is larger than your
-screen; also,
+Scale the output image by a factor M/N.  Currently supported scale factors are
+M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for
+baseline JPEG.  If the /N part is omitted, then M specifies the DCT scaled
+size to be applied on the given input.  For baseline JPEG this is equivalent
+to M/8 scaling, since the source DCT size for baseline JPEG is 8.
+Scaling is handy if the image is larger than your screen; also,
 .B djpeg
 runs much faster when scaling down the output.
 .TP
@@ -150,7 +153,7 @@ and
 .BR \-onepass .
 .TP
 .B \-nosmooth
-Use a faster, lower-quality upsampling routine.
+Don't use high-quality upsampling.
 .TP
 .B \-onepass
 Use one-pass instead of two-pass color quantization.  The one-pass method is
@@ -182,13 +185,13 @@ Same as
 .BR \-verbose .
 .SH EXAMPLES
 .LP
-This example decompresses the JPEG file foo.jpg, automatically quantizes to
-256 colors, and saves the output in GIF format in foo.gif:
+This example decompresses the JPEG file foo.jpg, quantizes it to
+256 colors, and saves the output in 8-bit BMP format in foo.bmp:
 .IP
-.B djpeg \-gif
+.B djpeg \-colors 256 \-bmp
 .I foo.jpg
 .B >
-.I foo.gif
+.I foo.bmp
 .SH HINTS
 To get a quick preview of an image, use the
 .B \-grayscale
@@ -243,6 +246,7 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-Still not as fast as we'd like.
+To avoid the Unisys LZW patent,
+.B djpeg
+produces uncompressed GIF files.  These are larger than they should be, but
+are readable by standard GIF decoders.

djpeg.c

@@ -1,7 +1,8 @@
 /*
  * djpeg.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -327,7 +328,7 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       if (++argn >= argc)	/* advance to next argument */
 	usage();
       if (sscanf(argv[argn], "%d/%d",
-		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
+		 &cinfo->scale_num, &cinfo->scale_denom) < 1)
 	usage();
 
     } else if (keymatch(arg, "targa", 1)) {
@@ -344,9 +345,9 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
 
 
 /*
- * Marker processor for COM markers.
+ * Marker processor for COM and interesting APPn markers.
  * This replaces the library's built-in processor, which just skips the marker.
- * We want to print out the marker as text, if possible.
+ * We want to print out the marker as text, to the extent possible.
  * Note this code relies on a non-suspending data source.
  */
 
@@ -366,7 +367,7 @@ jpeg_getc (j_decompress_ptr cinfo)
 
 
 METHODDEF(boolean)
-COM_handler (j_decompress_ptr cinfo)
+print_text_marker (j_decompress_ptr cinfo)
 {
   boolean traceit = (cinfo->err->trace_level >= 1);
   INT32 length;
@@ -377,8 +378,13 @@ COM_handler (j_decompress_ptr cinfo)
   length += jpeg_getc(cinfo);
   length -= 2;			/* discount the length word itself */
 
-  if (traceit)
+  if (traceit) {
+    if (cinfo->unread_marker == JPEG_COM)
       fprintf(stderr, "Comment, length %ld:\n", (long) length);
+    else			/* assume it is an APPn otherwise */
+      fprintf(stderr, "APP%d, length %ld:\n",
+	      cinfo->unread_marker - JPEG_APP0, (long) length);
+  }
 
   while (--length >= 0) {
     ch = jpeg_getc(cinfo);
@@ -445,8 +451,15 @@ main (int argc, char **argv)
   jerr.addon_message_table = cdjpeg_message_table;
   jerr.first_addon_message = JMSG_FIRSTADDONCODE;
   jerr.last_addon_message = JMSG_LASTADDONCODE;
-  /* Insert custom COM marker processor. */
-  jpeg_set_marker_processor(&cinfo, JPEG_COM, COM_handler);
+
+  /* Insert custom marker processor for COM and APP12.
+   * APP12 is used by some digital camera makers for textual info,
+   * so we provide the ability to display it as text.
+   * If you like, additional APPn marker types can be selected for display,
+   * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
+   */
+  jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
+  jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
 
   /* Now safe to enable signal catcher. */
 #ifdef NEED_SIGNAL_CATCHER

example.c

@@ -3,7 +3,7 @@
  *
  * This file illustrates how to use the IJG code as a subroutine library
  * to read or write JPEG image files.  You should look at this code in
- * conjunction with the documentation file libjpeg.doc.
+ * conjunction with the documentation file libjpeg.txt.
  *
  * This code will not do anything useful as-is, but it may be helpful as a
  * skeleton for constructing routines that call the JPEG library.  
@@ -196,7 +196,7 @@ write_JPEG_file (char * filename, int quality)
  * files for anything that doesn't fit within the maximum-memory setting.
  * (Note that temp files are NOT needed if you use the default parameters.)
  * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
  *
  * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
  * files to be compatible with everyone else's.  If you cannot readily read
@@ -335,7 +335,7 @@ read_JPEG_file (char * filename)
   /* We can ignore the return value from jpeg_read_header since
    *   (a) suspension is not possible with the stdio data source, and
    *   (b) we passed TRUE to reject a tables-only JPEG file as an error.
-   * See libjpeg.doc for more info.
+   * See libjpeg.txt for more info.
    */
 
   /* Step 4: set parameters for decompression */
@@ -413,14 +413,14 @@ read_JPEG_file (char * filename)
  * In the above code, we ignored the return value of jpeg_read_scanlines,
  * which is the number of scanlines actually read.  We could get away with
  * this because we asked for only one line at a time and we weren't using
- * a suspending data source.  See libjpeg.doc for more info.
+ * a suspending data source.  See libjpeg.txt for more info.
  *
  * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
  * we should have done it beforehand to ensure that the space would be
  * counted against the JPEG max_memory setting.  In some systems the above
  * code would risk an out-of-memory error.  However, in general we don't
  * know the output image dimensions before jpeg_start_decompress(), unless we
- * call jpeg_calc_output_dimensions().  See libjpeg.doc for more about this.
+ * call jpeg_calc_output_dimensions().  See libjpeg.txt for more about this.
  *
  * Scanlines are returned in the same order as they appear in the JPEG file,
  * which is standardly top-to-bottom.  If you must emit data bottom-to-top,
@@ -429,5 +429,5 @@ read_JPEG_file (char * filename)
  *
  * As with compression, some operating modes may require temporary files.
  * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
  */

filelist.txt

@@ -1,6 +1,6 @@
 IJG JPEG LIBRARY:  FILE LIST
 
-Copyright (C) 1994-1996, Thomas G. Lane.
+Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -28,8 +28,6 @@ jerror.h	Declares JPEG library's error and trace message codes.
 jinclude.h	Central include file used by all IJG .c files to reference
 		system include files.
 jpegint.h	JPEG library's internal data structures.
-jchuff.h	Private declarations for Huffman encoder modules.
-jdhuff.h	Private declarations for Huffman decoder modules.
 jdct.h		Private declarations for forward & reverse DCT subsystems.
 jmemsys.h	Private declarations for memory management subsystem.
 jversion.h	Version information.
@@ -72,10 +70,10 @@ jcdctmgr.c	DCT manager (DCT implementation selection & control).
 jfdctint.c	Forward DCT using slow-but-accurate integer method.
 jfdctfst.c	Forward DCT using faster, less accurate integer method.
 jfdctflt.c	Forward DCT using floating-point arithmetic.
-jchuff.c	Huffman entropy coding for sequential JPEG.
-jcphuff.c	Huffman entropy coding for progressive JPEG.
+jchuff.c	Huffman entropy coding.
+jcarith.c	Arithmetic entropy coding.
 jcmarker.c	JPEG marker writing.
-jdatadst.c	Data destination manager for stdio output.
+jdatadst.c	Data destination managers for memory and stdio output.
 
 Decompression side of the library:
 
@@ -85,23 +83,24 @@ jdmainct.c	Main buffer controller (JPEG decompressor => postprocessor).
 jdcoefct.c	Buffer controller for DCT coefficient buffer.
 jdpostct.c	Postprocessor buffer controller.
 jdmarker.c	JPEG marker reading.
-jdhuff.c	Huffman entropy decoding for sequential JPEG.
-jdphuff.c	Huffman entropy decoding for progressive JPEG.
+jdhuff.c	Huffman entropy decoding.
+jdarith.c	Arithmetic entropy decoding.
 jddctmgr.c	IDCT manager (IDCT implementation selection & control).
 jidctint.c	Inverse DCT using slow-but-accurate integer method.
 jidctfst.c	Inverse DCT using faster, less accurate integer method.
 jidctflt.c	Inverse DCT using floating-point arithmetic.
-jidctred.c	Inverse DCTs with reduced-size outputs.
 jdsample.c	Upsampling.
 jdcolor.c	Color space conversion.
 jdmerge.c	Merged upsampling/color conversion (faster, lower quality).
 jquant1.c	One-pass color quantization using a fixed-spacing colormap.
 jquant2.c	Two-pass color quantization using a custom-generated colormap.
 		Also handles one-pass quantization to an externally given map.
-jdatasrc.c	Data source manager for stdio input.
+jdatasrc.c	Data source managers for memory and stdio input.
 
 Support files for both compression and decompression:
 
+jaricom.c	Tables for common use in arithmetic entropy encoding and
+		decoding routines.
 jerror.c	Standard error handling routines (application replaceable).
 jmemmgr.c	System-independent (more or less) memory management code.
 jutils.c	Miscellaneous utility routines.
@@ -113,12 +112,12 @@ module:
 jmemnobs.c	"No backing store": assumes adequate virtual memory exists.
 jmemansi.c	Makes temporary files with ANSI-standard routine tmpfile().
 jmemname.c	Makes temporary files with program-generated file names.
-jmemdos.c	Custom implementation for MS-DOS: knows about extended and
-		expanded memory as well as temporary files.
+jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
+		can use extended and expanded memory as well as temp files.
 jmemmac.c	Custom implementation for Apple Macintosh.
 
 Exactly one of the system-dependent modules should be configured into an
-installed JPEG library (see install.doc for hints about which one to use).
+installed JPEG library (see install.txt for hints about which one to use).
 On unusual systems you may find it worthwhile to make a special
 system-dependent memory manager.
 
@@ -134,8 +133,9 @@ CJPEG/DJPEG/JPEGTRAN
 
 Include files:
 
-cdjpeg.h	Declarations shared by cjpeg/djpeg modules.
-cderror.h	Additional error and trace message codes for cjpeg/djpeg.
+cdjpeg.h	Declarations shared by cjpeg/djpeg/jpegtran modules.
+cderror.h	Additional error and trace message codes for cjpeg et al.
+transupp.h	Declarations for jpegtran support routines in transupp.c.
 
 C source code files:
 
@@ -146,11 +146,12 @@ cdjpeg.c	Utility routines used by all three programs.
 rdcolmap.c	Code to read a colormap file for djpeg's "-map" switch.
 rdswitch.c	Code to process some of cjpeg's more complex switches.
 		Also used by jpegtran.
+transupp.c	Support code for jpegtran: lossless image manipulations.
 
 Image file reader modules for cjpeg:
 
 rdbmp.c		BMP file input.
-rdgif.c		GIF file input.
+rdgif.c		GIF file input (now just a stub).
 rdppm.c		PPM/PGM file input.
 rdrle.c		Utah RLE file input.
 rdtarga.c	Targa file input.
@@ -158,7 +159,7 @@ rdtarga.c	Targa file input.
 Image file writer modules for djpeg:
 
 wrbmp.c		BMP file output.
-wrgif.c		GIF file output.
+wrgif.c		GIF file output (a mere shadow of its former self).
 wrppm.c		PPM/PGM file output.
 wrrle.c		Utah RLE file output.
 wrtarga.c	Targa file output.
@@ -182,22 +183,33 @@ ADDITIONAL FILES
 Documentation (see README for a guide to the documentation files):
 
 README		Master documentation file.
-*.doc		Other documentation files.
+*.txt		Other documentation files.
 *.1		Documentation in Unix man page format.
 change.log	Version-to-version change highlights.
 example.c	Sample code for calling JPEG library.
 
-Configuration/installation files and programs (see install.doc for more info):
+Configuration/installation files and programs (see install.txt for more info):
 
 configure	Unix shell script to perform automatic configuration.
+configure.ac	Source file for use with Autoconf to generate configure.
+ltmain.sh	Support scripts for configure (from GNU libtool).
+config.guess
+config.sub
+depcomp
+missing
+install-sh	Install shell script for those Unix systems lacking one.
+Makefile.in	Makefile input for configure.
+Makefile.am	Source file for use with Automake to generate Makefile.in.
 ckconfig.c	Program to generate jconfig.h on non-Unix systems.
-jconfig.doc	Template for making jconfig.h by hand.
-makefile.*	Sample makefiles for particular systems.
+jconfig.txt	Template for making jconfig.h by hand.
+mak*.*		Sample makefiles for particular systems.
 jconfig.*	Sample jconfig.h for particular systems.
+libjpeg.map	Script to generate shared library with versioned symbols.
+aclocal.m4	M4 macro definitions for use with Autoconf.
 ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
 		L. Peter Deutsch and Aladdin Enterprises).
 
-Test files (see install.doc for test procedure):
+Test files (see install.txt for test procedure):
 
 test*.*		Source and comparison files for confidence test.
 		These are binary image files, NOT text files.

install-sh

@@ -0,0 +1,520 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2009-04-28.21; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+nl='
+'
+IFS=" ""	$nl"
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit=${DOITPROG-}
+if test -z "$doit"; then
+  doit_exec=exec
+else
+  doit_exec=$doit
+fi
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_glob='?'
+initialize_posix_glob='
+  test "$posix_glob" != "?" || {
+    if (set -f) 2>/dev/null; then
+      posix_glob=
+    else
+      posix_glob=:
+    fi
+  }
+'
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+no_target_directory=
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+	shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+	case $mode in
+	  *' '* | *'	'* | *'
+'*	  | *'*'* | *'?'* | *'['*)
+	    echo "$0: invalid mode: $mode" >&2
+	    exit 1;;
+	esac
+	shift;;
+
+    -o) chowncmd="$chownprog $2"
+	shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t) dst_arg=$2
+	shift;;
+
+    -T) no_target_directory=true;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --)	shift
+	break;;
+
+    -*)	echo "$0: invalid option: $1" >&2
+	exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call `install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  trap '(exit $?); exit' 1 2 13 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+	u_plus_rw=
+      else
+	u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names starting with `-'.
+  case $src in
+    -*) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+
+    dst=$dst_arg
+    # Protect names starting with `-'.
+    case $dst in
+      -*) dst=./$dst;;
+    esac
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test -n "$no_target_directory"; then
+	echo "$0: $dst_arg: Is a directory" >&2
+	exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`
+	(dirname "$dst") 2>/dev/null ||
+	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
+	     X"$dst" : 'X\(//\)[^/]' \| \
+	     X"$dst" : 'X\(//\)$' \| \
+	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
+	echo X"$dst" |
+	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)[^/].*/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\/\)$/{
+		   s//\1/
+		   q
+		 }
+		 /^X\(\/\).*/{
+		   s//\1/
+		   q
+		 }
+		 s/.*/./; q'
+      `
+
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+	# Create intermediate dirs using mode 755 as modified by the umask.
+	# This is like FreeBSD 'install' as of 1997-10-28.
+	umask=`umask`
+	case $stripcmd.$umask in
+	  # Optimize common cases.
+	  *[2367][2367]) mkdir_umask=$umask;;
+	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+	  *[0-7])
+	    mkdir_umask=`expr $umask + 22 \
+	      - $umask % 100 % 40 + $umask % 20 \
+	      - $umask % 10 % 4 + $umask % 2
+	    `;;
+	  *) mkdir_umask=$umask,go-w;;
+	esac
+
+	# With -d, create the new directory with the user-specified mode.
+	# Otherwise, rely on $mkdir_umask.
+	if test -n "$dir_arg"; then
+	  mkdir_mode=-m$mode
+	else
+	  mkdir_mode=
+	fi
+
+	posix_mkdir=false
+	case $umask in
+	  *[123567][0-7][0-7])
+	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+	    ;;
+	  *)
+	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+	    if (umask $mkdir_umask &&
+		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+	    then
+	      if test -z "$dir_arg" || {
+		   # Check for POSIX incompatibilities with -m.
+		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+		   # other-writeable bit of parent directory when it shouldn't.
+		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+		   case $ls_ld_tmpdir in
+		     d????-?r-*) different_mode=700;;
+		     d????-?--*) different_mode=755;;
+		     *) false;;
+		   esac &&
+		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+		   }
+		 }
+	      then posix_mkdir=:
+	      fi
+	      rmdir "$tmpdir/d" "$tmpdir"
+	    else
+	      # Remove any dirs left behind by ancient mkdir implementations.
+	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+	    fi
+	    trap '' 0;;
+	esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+	umask $mkdir_umask &&
+	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+	/*) prefix='/';;
+	-*) prefix='./';;
+	*)  prefix='';;
+      esac
+
+      eval "$initialize_posix_glob"
+
+      oIFS=$IFS
+      IFS=/
+      $posix_glob set -f
+      set fnord $dstdir
+      shift
+      $posix_glob set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+	test -z "$d" && continue
+
+	prefix=$prefix$d
+	if test -d "$prefix"; then
+	  prefixes=
+	else
+	  if $posix_mkdir; then
+	    (umask=$mkdir_umask &&
+	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+	    # Don't fail if two instances are running concurrently.
+	    test -d "$prefix" || exit 1
+	  else
+	    case $prefix in
+	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+	      *) qprefix=$prefix;;
+	    esac
+	    prefixes="$prefixes '$qprefix'"
+	  fi
+	fi
+	prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+	# Don't fail if two instances are running concurrently.
+	(umask $mkdir_umask &&
+	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+	  test -d "$dstdir" || exit 1
+	obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+
+       eval "$initialize_posix_glob" &&
+       $posix_glob set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       $posix_glob set +f &&
+
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+	# Now remove or move aside any old file at destination location.
+	# We try this two ways since rm can't unlink itself on some
+	# systems and the destination file might be busy for other
+	# reasons.  In this case, the final cleanup might fail but the new
+	# file should still install successfully.
+	{
+	  test ! -f "$dst" ||
+	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+	  } ||
+	  { echo "$0: cannot unlink or rename $dst" >&2
+	    (exit 1); exit 1
+	  }
+	} &&
+
+	# Now rename the file to the real destination.
+	$doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC"
+# time-stamp-end: "; # UTC"
+# End:

install.txt

@@ -1,6 +1,6 @@
 INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
 
-Copyright (C) 1991-1996, Thomas G. Lane.
+Copyright (C) 1991-2009, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -94,6 +94,14 @@ Configure was created with GNU Autoconf and it follows the usual conventions
 for GNU configure scripts.  It makes a few assumptions that you may want to
 override.  You can do this by providing optional switches to configure:
 
+* Configure will build both static and shared libraries, if possible.
+If you want to build libjpeg only as a static library, say
+	./configure --disable-shared
+If you want to build libjpeg only as a shared library, say
+	./configure --disable-static
+Configure uses GNU libtool to take care of system-dependent shared library
+building methods.
+
 * Configure will use gcc (GNU C compiler) if it's available, otherwise cc.
 To force a particular compiler to be selected, use the CC option, for example
 	./configure CC='cc'
@@ -102,8 +110,10 @@ For example, on HP-UX you probably want to say
 	./configure CC='cc -Aa'
 to get HP's compiler to run in ANSI mode.
 
-* The default CFLAGS setting is "-O".  You can override this by saying,
-for example, ./configure CFLAGS='-O2'.
+* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc.
+You can override this by saying, for example,
+	./configure CFLAGS='-O2'
+if you want to compile without debugging support.
 
 * Configure will set up the makefile so that "make install" will install files
 into /usr/local/bin, /usr/local/man, etc.  You can specify an installation
@@ -131,25 +141,29 @@ Makefile	jconfig file	System and/or compiler
 
 makefile.manx	jconfig.manx	Amiga, Manx Aztec C
 makefile.sas	jconfig.sas	Amiga, SAS C
+makeproj.mac	jconfig.mac	Apple Macintosh, Metrowerks CodeWarrior
 mak*jpeg.st	jconfig.st	Atari ST/STE/TT, Pure C or Turbo C
 makefile.bcc	jconfig.bcc	MS-DOS or OS/2, Borland C
 makefile.dj	jconfig.dj	MS-DOS, DJGPP (Delorie's port of GNU C)
-makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C version 6.x and up
+makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C (16-bit only)
 makefile.wat	jconfig.wat	MS-DOS, OS/2, or Windows NT, Watcom C
+makefile.vc	jconfig.vc	Windows NT/95, MS Visual C++
+make*.vc6	jconfig.vc	Windows NT/95, MS Visual C++ 6
+make*.vc9	jconfig.vc	Windows NT/95, MS Visual C++ 2008 (v9)
 makefile.mms	jconfig.vms	Digital VMS, with MMS software
 makefile.vms	jconfig.vms	Digital VMS, without MMS software
 
-Copy the proper jconfig file to jconfig.h and the makefile to Makefile
-(or whatever your system uses as the standard makefile name).  For the
-Atari, we provide four project files; see the Atari hints below.
+Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or
+whatever your system uses as the standard makefile name).  For more info see
+the appropriate system-specific hints section near the end of this file.
 
 
 Configuring the software by hand
 --------------------------------
 
 First, generate a jconfig.h file.  If you are moderately familiar with C,
-the comments in jconfig.doc should be enough information to do this; just
-copy jconfig.doc to jconfig.h and edit it appropriately.  Otherwise, you may
+the comments in jconfig.txt should be enough information to do this; just
+copy jconfig.txt to jconfig.h and edit it appropriately.  Otherwise, you may
 prefer to use the ckconfig.c program.  You will need to compile and execute
 ckconfig.c by hand --- we hope you know at least enough to do that.
 ckconfig.c may not compile the first try (in fact, the whole idea is for it
@@ -303,7 +317,7 @@ As a quick test of functionality we've included a small sample image in
 several forms:
 	testorig.jpg	Starting point for the djpeg tests.
 	testimg.ppm	The output of djpeg testorig.jpg
-	testimg.gif	The output of djpeg -gif testorig.jpg
+	testimg.bmp	The output of djpeg -bmp -colors 256 testorig.jpg
 	testimg.jpg	The output of cjpeg testimg.ppm
 	testprog.jpg	Progressive-mode equivalent of testorig.jpg.
 	testimgp.jpg	The output of cjpeg -progressive -optimize testimg.ppm
@@ -339,10 +353,10 @@ check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined.
 If it still doesn't work, better use two-file style.
 
 If you chose a memory manager other than jmemnobs.c, you should test that
-temporary-file usage works.  Try "djpeg -gif -max 0 testorig.jpg" and make
-sure its output matches testimg.gif.  If you have any really large images
-handy, try compressing them with -optimize and/or decompressing with -gif to
-make sure your DEFAULT_MAX_MEM setting is not too large.
+temporary-file usage works.  Try "djpeg -bmp -colors 256 -max 0 testorig.jpg"
+and make sure its output matches testimg.bmp.  If you have any really large
+images handy, try compressing them with -optimize and/or decompressing with
+-colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large.
 
 NOTE: this is far from an exhaustive test of the JPEG software; some modules,
 such as 1-pass color quantization, are not exercised at all.  It's just a
@@ -357,7 +371,7 @@ Once you're done with the above steps, you can install the software by
 copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom)
 to wherever you normally install programs.  On Unix systems, you'll also want
 to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1)
-in the man-page directory.  The canned makefiles don't support this step
+in the man-page directory.  The pre-fab makefiles don't support this step
 since there's such a wide variety of installation procedures on different
 systems.
 
@@ -370,8 +384,13 @@ to see where configure thought the files should go.  You may need to edit
 the Makefile, particularly if your system's conventions for man page
 filenames don't match what configure expects.
 
-If you want to install the library file libjpeg.a and the include files j*.h
-(for use in compiling other programs besides the IJG ones), then say
+If you want to install the IJG library itself, for use in compiling other
+programs besides ours, then you need to put the four include files
+	jpeglib.h jerror.h jconfig.h jmorecfg.h
+into your include-file directory, and put the library file libjpeg.a
+(extension may vary depending on system) wherever library files go.
+If you generated a Makefile with "configure", it will do what it thinks
+is the right thing if you say
 	make install-lib
 
 
@@ -424,10 +443,10 @@ on our to-do list.)
 
 The PPM reader (rdppm.c) can read 12-bit data from either text-format or
 binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
-maxval greater than 255 are assumed to use 2 bytes per sample, LSB first
-(little-endian order).  As of early 1995, 2-byte binary format is not
-officially supported by the PBMPLUS library, but it is expected that the
-next release of PBMPLUS will support it.  Note that the PPM reader will
+maxval greater than 255 are assumed to use 2 bytes per sample, MSB first
+(big-endian order).  As of early 1995, 2-byte binary format is not
+officially supported by the PBMPLUS library, but it is expected that a
+future release of PBMPLUS will support it.  Note that the PPM reader will
 read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
 data is automatically rescaled to either maxval=255 or maxval=4095 as
 appropriate for the cjpeg bit depth.
@@ -498,7 +517,7 @@ that float DCT results may vary slightly across machines.)  To do that, add
 "#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h.  Even if you don't change
 the default, you should redefine JDCT_FASTEST, which is the method selected
 by djpeg's -fast switch.  Don't forget to update the documentation files
-(usage.doc and/or cjpeg.1, djpeg.1) to agree with what you've done.
+(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done.
 
 If access to "short" arrays is slow on your machine, it may be a win to
 define type JCOEF as int rather than short.  This will cost a good deal of
@@ -515,7 +534,7 @@ In general, it's worth trying the maximum optimization level of your compiler,
 and experimenting with any optional optimizations such as loop unrolling.
 (Unfortunately, far too many compilers have optimizer bugs ... be prepared to
 back off if the code fails self-test.)  If you do any experimentation along
-these lines, please report the optimal settings to jpeg-info@uunet.uu.net so
+these lines, please report the optimal settings to jpeg-info@jpegclub.org so
 we can mention them in future releases.  Be sure to specify your machine and
 compiler version.
 
@@ -524,7 +543,7 @@ HINTS FOR SPECIFIC SYSTEMS
 ==========================
 
 We welcome reports on changes needed for systems not mentioned here.  Submit
-'em to jpeg-info@uunet.uu.net.  Also, if configure or ckconfig.c is wrong
+'em to jpeg-info@jpegclub.org.  Also, if configure or ckconfig.c is wrong
 about how to configure the JPEG software for your system, please let us know.
 
 
@@ -545,7 +564,7 @@ Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'.  Remove the
 lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h'
 dependency section.
 
-Copy jconfig.doc to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
+Copy jconfig.txt to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
 and CHAR_IS_UNSIGNED.
 
 Run the makefile using !AMU not !Make.  If you want to use the 'clean' and
@@ -568,26 +587,27 @@ Atari ST/STE/TT:
 Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st
 to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively.  The
 project files should work as-is with Pure C.  For Turbo C, change library
-filenames "PC..." to "TC..." in each project file.  Note that libjpeg.prj
+filenames "pc..." to "tc..." in each project file.  Note that libjpeg.prj
 selects jmemansi.c as the recommended memory manager.  You'll probably want to
 adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K
 less than your normal free memory.  Put "#define DEFAULT_MAX_MEM nnnn" into
 jconfig.h to do this.
 
 To use the 68881/68882 coprocessor for the floating point DCT, add the
-compiler option "-8" to the project files and replace PCFLTLIB.LIB with
-PC881LIB.LIB in cjpeg.prj and djpeg.prj.  Or if you don't have a
+compiler option "-8" to the project files and replace pcfltlib.lib with
+pc881lib.lib in cjpeg.prj and djpeg.prj.  Or if you don't have a
 coprocessor, you may prefer to remove the float DCT code by undefining
 DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float
 code will be too slow to be useful).  In that case, you can delete
-PCFLTLIB.LIB from the project files.
+pcfltlib.lib from the project files.
 
 Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp,
 or jpegtran.ttp.  You'll have to perform the self-test by hand.
 
 We haven't bothered to include project files for rdjpgcom and wrjpgcom.
 Those source files should just be compiled by themselves; they don't
-depend on the JPEG library.
+depend on the JPEG library.  You can use the default.prj project file
+of the Pure C distribution to make the programs.
 
 There is a bug in some older versions of the Turbo C library which causes the
 space used by temporary files created with "tmpfile()" not to be freed after
@@ -637,49 +657,62 @@ provide a Unix-style command line interface.  You can use this interface on
 the Mac by means of the ccommand() library routine provided by Metrowerks
 CodeWarrior or Think C.  This is only appropriate for testing the library,
 however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want
-to develop a Mac-style user interface.  Such an interface exists for pre-v5
-IJG libraries (see the Think C entry, below) but at this writing it has not
-been updated to work with the current release.
+to develop a Mac-style user interface.  There isn't a complete example
+available at the moment, but there are some helpful starting points:
+1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to
+JPEG under System 7 and later.  This only illustrates how to use the
+compression half of the library, but it does a very nice job of that part.
+The CodeWarrior source code is available from http://www.pobox.com/~jsam.
+2. Jim Brunner prepared a Mac-style user interface for both compression and
+decompression.  Unfortunately, it hasn't been updated since IJG v4, and
+the library's API has changed considerably since then.  Still it may be of
+some help, particularly as a guide to compiling the IJG code under Think C.
+Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu
+or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx.
 
-We recommend replacing "malloc" and "free" by "NewPtr" and "DisposePtr" in
-whichever memory manager back end you use, because Mac C libraries often
-have inferior implementations of malloc/free.  jmemmac.c is recommended;
-it is a customized version of jmemansi.c with this change and a Mac-specific
-implementation of jpeg_mem_available().  You can also use jmemnobs.c if you
-don't care about handling images larger than available memory.
+jmemmac.c is the recommended memory manager back end for Macintosh.  It uses
+NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific
+implementation of jpeg_mem_available().  It also creates temporary files that
+follow Mac conventions.  (That part of the code relies on System-7-or-later OS
+functions.  See the comments in jmemmac.c if you need to run it on System 6.)
+NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c.
 
-
-Macintosh, MPW:
-
-We don't directly support MPW in the current release, but Larry Rosenstein
-ported an earlier version of the IJG code without very much trouble.  There's
-useful notes and conversion scripts in his kit for porting PBMPLUS to MPW.
-You can obtain the kit by FTP to ftp.apple.com, files /pub/lsr/pbmplus-port*.
+You can also use jmemnobs.c, if you don't care about handling images larger
+than available memory.  If you use any memory manager back end other than
+jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and
+"DisposePtr", because Mac C libraries often have peculiar implementations of
+malloc/free.  (For instance, free() may not return the freed space to the
+Mac Memory Manager.  This is undesirable for the IJG code because jmemmgr.c
+already clumps space requests.)
 
 
 Macintosh, Metrowerks CodeWarrior:
 
-Metrowerks release DR2 has problems with the IJG code; don't use it.  Release
-DR3.5 or later should be OK.
-
 The Unix-command-line-style interface can be used by defining USE_CCOMMAND.
-You'll also need to define either TWO_FILE_COMMANDLINE (to avoid stdin/stdout)
-or USE_FDOPEN (to make stdin/stdout work in binary mode).  See the Think C
-entry for more details.
+You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout.
+This means that when using the cjpeg/djpeg programs, you'll have to type the
+input and output file names in the "Arguments" text-edit box, rather than
+using the file radio buttons.  (Perhaps USE_FDOPEN or USE_SETMODE would
+eliminate the problem, but I haven't heard from anyone who's tried it.)
 
 On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended
 float.  jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power
 of 2.  Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
 
+The supplied configuration file jconfig.mac can be used for your jconfig.h;
+it includes all the recommended symbol definitions.  If you have AppleScript
+installed, you can run the supplied script makeproj.mac to create CodeWarrior
+project files for the library and the testbed applications, then build the
+library and applications.  (Thanks to Dan Sears and Don Agro for this nifty
+hack, which saves us from trying to maintain CodeWarrior project files as part
+of the IJG distribution...)
+
 
 Macintosh, Think C:
 
-Jim Brunner has prepared a Mac-style user interface for the IJG library.
-Unfortunately, the released version of it only works with pre-v5 libraries;
-still, it may be a useful starting point.  You can obtain Jim's additional
-source code from the Info-Mac archives, at sumex-aim.stanford.edu or mirrors
-thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx.  Jim's documentation
-also includes more detailed build instructions for Think C.
+The documentation in Jim Brunner's "JPEG Convert" source code (see above)
+includes detailed build instructions for Think C; it's probably somewhat
+out of date for the current release, but may be helpful.
 
 If you want to build the minimal command line version, proceed as follows.
 You'll have to prepare project files for the programs; we don't include any
@@ -695,6 +728,9 @@ On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float.
 jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2.
 Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
 
+jconfig.mac should work as a jconfig.h configuration file for Think C,
+but the makeproj.mac AppleScript script is specific to CodeWarrior.  Sorry.
+
 
 MIPS R3000:
 
@@ -705,7 +741,7 @@ Note that the R3000 chip is found in workstations from DEC and others.
 
 MS-DOS, generic comments for 16-bit compilers:
 
-The IJG code is designed to be compiled in 80x86 "small" or "medium" memory
+The IJG code is designed to work well in 80x86 "small" or "medium" memory
 models (i.e., data pointers are 16 bits unless explicitly declared "far";
 code pointers can be either size).  You may be able to use small model to
 compile cjpeg or djpeg by itself, but you will probably have to use medium
@@ -721,7 +757,7 @@ The DOS-specific memory manager, jmemdos.c, should be used if possible.
 It needs some assembly-code routines which are in jmemdosa.asm; make sure
 your makefile assembles that file and includes it in the library.  If you
 don't have a suitable assembler, you can get pre-assembled object files for
-jmemdosa by FTP from ftp.uu.net: graphics/jpeg/jdosaobj.zip.  (DOS-oriented
+jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip.  (DOS-oriented
 distributions of the IJG source code often include these object files.)
 
 When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set
@@ -778,31 +814,22 @@ jconfig.bcc already includes #define USE_SETMODE to make this work.
 (fdopen does not work correctly.)
 
 
-MS-DOS, DJGPP:
-
-Use a recent version of DJGPP (1.11 or better).  If you prefer two-file
-command line style, change the supplied jconfig.dj to define
-TWO_FILE_COMMANDLINE.  makefile.dj is set up to generate only COFF files
-(cjpeg, djpeg, etc) when you say make.  After testing, say "make exe" to
-make executables with stub.exe, or "make standalone" if you want executables
-that include go32.  You will probably need to tweak the makefile's pointer to
-go32.exe to do "make standalone".
-
-
 MS-DOS, Microsoft C:
 
-makefile.mc6 works with Microsoft C, Visual C++, etc.  Note that this
-makefile assumes that the working copy of itself is called "makefile".
-If you want to call it something else, say "makefile.mak", be sure to adjust
-the dependency line that reads "$(RFILE) : makefile".  Otherwise the make
-will fail because it doesn't know how to create "makefile".  Worse, some
-releases of Microsoft's make utilities give an incorrect error message in
-this situation.
+makefile.mc6 works with Microsoft C, DOS Visual C++, etc.  It should only
+be used if you want to build a 16-bit (small or medium memory model) program.
 
 If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
 jconfig.mc6 already includes #define USE_SETMODE to make this work.
 (fdopen does not work correctly.)
 
+Note that this makefile assumes that the working copy of itself is called
+"makefile".  If you want to call it something else, say "makefile.mak",
+be sure to adjust the dependency line that reads "$(RFILE) : makefile".
+Otherwise the make will fail because it doesn't know how to create "makefile".
+Worse, some releases of Microsoft's make utilities give an incorrect error
+message in this situation.
+
 Old versions of MS C fail with an "out of macro expansion space" error
 because they can't cope with the macro TRACEMS8 (defined in jerror.h).
 If this happens to you, the easiest solution is to change TRACEMS8 to
@@ -813,11 +840,12 @@ Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn
 off optimization entirely (remove -O from CFLAGS).  6.00A is better, but it
 still generates bad code if you enable loop optimizations (-Ol or -Ox).
 
-MS C 8.0 reportedly fails to compile jquant1.c if optimization is turned off
-(yes, off).
+MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ...
+which is on by default.  To work around this bug, compile that one file
+with /Oo-.
 
 
-Microsoft Windows (all versions):
+Microsoft Windows (all versions), generic comments:
 
 Some Windows system include files define typedef boolean as "unsigned char".
 The IJG code also defines typedef boolean, but we make it "int" by default.
@@ -825,45 +853,87 @@ This doesn't affect the IJG programs because we don't import those Windows
 include files.  But if you use the JPEG library in your own program, and some
 of your program's files import one definition of boolean while some import the
 other, you can get all sorts of mysterious problems.  A good preventive step
-is to change jmorecfg.h to define boolean as unsigned char.  We recommend
-making that part of jmorecfg.h read like this:
+is to make the IJG library use "unsigned char" for boolean.  To do that,
+add something like this to your jconfig.h file:
+	/* Define "boolean" as unsigned char, not int, per Windows custom */
 	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
 	typedef unsigned char boolean;
 	#endif
-In v6a and later, using incompatible definitions of boolean will usually lead
-to the failure message "JPEG parameter struct mismatch", rather than the
-difficult-to-diagnose bugs it caused with earlier versions.
+	#define HAVE_BOOLEAN	/* prevent jmorecfg.h from redefining it */
+(This is already in jconfig.vc, by the way.)
+
+windef.h contains the declarations
+	#define far
+	#define FAR far
+Since jmorecfg.h tries to define FAR as empty, you may get a compiler
+warning if you include both jpeglib.h and windef.h (which windows.h
+includes).  To suppress the warning, you can put "#ifndef FAR"/"#endif"
+around the line "#define FAR" in jmorecfg.h.
+(Something like this is already in jmorecfg.h, by the way.)
 
 When using the library in a Windows application, you will almost certainly
 want to modify or replace the error handler module jerror.c, since our
 default error handler does a couple of inappropriate things:
   1. it tries to write error and warning messages on stderr;
   2. in event of a fatal error, it exits by calling exit().
+
 A simple stopgap solution for problem 1 is to replace the line
 	fprintf(stderr, "%s\n", buffer);
-(in output_message in jerror.c) with something like
-	MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK);
+(in output_message in jerror.c) with
+	MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR);
 It's highly recommended that you at least do that much, since otherwise
-error messages will disappear into nowhere.
+error messages will disappear into nowhere.  (Beginning with IJG v6b, this
+code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in
+jconfig.h to enable it.)
+
 The proper solution for problem 2 is to return control to your calling
 application after a library error.  This can be done with the setjmp/longjmp
-technique discussed in libjpeg.doc and illustrated in example.c.
+technique discussed in libjpeg.txt and illustrated in example.c.  (NOTE:
+some older Windows C compilers provide versions of setjmp/longjmp that
+don't actually work under Windows.  You may need to use the Windows system
+functions Catch and Throw instead.)
+
+The recommended memory manager under Windows is jmemnobs.c; in other words,
+let Windows do any virtual memory management needed.  You should NOT use
+jmemdos.c nor jmemdosa.asm under Windows.
+
+For Windows 3.1, we recommend compiling in medium or large memory model;
+for newer Windows versions, use a 32-bit flat memory model.  (See the MS-DOS
+sections above for more info about memory models.)  In the 16-bit memory
+models only, you'll need to put
+	#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+into jconfig.h to limit allocation chunks to 64Kb.  (Without that, you'd
+have to use huge memory model, which slows things down unnecessarily.)
+jmemnobs.c works without modification in large or flat memory models, but to
+use medium model, you need to modify its jpeg_get_large and jpeg_free_large
+routines to allocate far memory.  In any case, you might like to replace
+its calls to malloc and free with direct calls on Windows memory allocation
+functions.
 
 You may also want to modify jdatasrc.c and jdatadst.c to use Windows file
 operations rather than fread/fwrite.  This is only necessary if your C
 compiler doesn't provide a competent implementation of C stdio functions.
 
+You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library
+will accept or deliver color pixels in BGR sample order, not RGB; BGR order
+is usually more convenient under Windows.  Note that this change will break
+the sample applications cjpeg/djpeg, but the library itself works fine.
+
+
 Many people want to convert the IJG library into a DLL.  This is reasonably
 straightforward, but watch out for the following:
+
   1. Don't try to compile as a DLL in small or medium memory model; use
 large model, or even better, 32-bit flat model.  Many places in the IJG code
 assume the address of a local variable is an ordinary (not FAR) pointer;
 that isn't true in a medium-model DLL.
+
   2. Microsoft C cannot pass file pointers between applications and DLLs.
 (See Microsoft Knowledge Base, PSS ID Number Q50336.)  So jdatasrc.c and
 jdatadst.c don't work if you open a file in your application and then pass
 the pointer to the DLL.  One workaround is to make jdatasrc.c/jdatadst.c
 part of your main application rather than part of the DLL.
+
   3. You'll probably need to modify the macros GLOBAL() and EXTERN() to
 attach suitable linkage keywords to the exported routine names.  Similarly,
 you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers
@@ -871,10 +941,13 @@ are declared in a way that lets application routines be called back through
 the function pointers.  These macros are in jmorecfg.h.  Typical definitions
 for a 16-bit DLL are:
 	#define GLOBAL(type)		type _far _pascal _loadds _export
-	#define EXTERN(type)		extern type _far _pascal
+	#define EXTERN(type)		extern type _far _pascal _loadds
 	#define METHODDEF(type)		static type _far _pascal
 	#define JMETHOD(type,methodname,arglist)  \
 		type (_far _pascal *methodname) arglist
+For a 32-bit DLL you may want something like
+	#define GLOBAL(type)		__declspec(dllexport) type
+	#define EXTERN(type)		extern __declspec(dllexport) type
 Although not all the GLOBAL routines are actually intended to be called by
 the application, the performance cost of making them all DLL entry points is
 negligible.
@@ -888,6 +961,12 @@ but hasn't been very high priority --- any volunteers out there?
 
 Microsoft Windows, Borland C:
 
+The provided jconfig.bcc should work OK in a 32-bit Windows environment,
+but you'll need to tweak it in a 16-bit environment (you'd need to define
+NEED_FAR_POINTERS and MAX_ALLOC_CHUNK).  Beware that makefile.bcc will need
+alteration if you want to use it for Windows --- in particular, you should
+use jmemnobs.c not jmemdos.c under Windows.
+
 Borland C++ 4.5 fails with an internal compiler error when trying to compile
 jdmerge.c in 32-bit mode.  If enough people complain, perhaps Borland will fix
 it.  In the meantime, the simplest known workaround is to add a redundant
@@ -902,6 +981,93 @@ doesn't trigger the bug.
 Recent reports suggest that this bug does not occur with "bcc32a" (the
 Pentium-optimized version of the compiler).
 
+Another report from a user of Borland C 4.5 was that incorrect code (leading
+to a color shift in processed images) was produced if any of the following
+optimization switch combinations were used: 
+	-Ot -Og
+	-Ot -Op
+	-Ot -Om
+So try backing off on optimization if you see such a problem.  (Are there
+several different releases all numbered "4.5"??)
+
+
+Microsoft Windows, Microsoft Visual C++:
+
+jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory
+model.  makefile.vc is intended for command-line use.  (If you are using
+the Developer Studio environment, you may prefer the DevStudio project
+files; see below.)
+
+v7 adds extern "C" to jpeglib.h.  This avoids the need to put extern "C"
+{ ... } around #include "jpeglib.h" in your C++ application.
+You can also force VC++ to treat the library as C++ code by renaming
+all the *.c files to *.cpp (and adjusting the makefile to match).
+In this case you also need to define the symbol DONT_USE_EXTERN_C in
+the configuration to prevent jpeglib.h from using extern "C".
+
+
+Microsoft Windows, Microsoft Visual C++ 6 Developer Studio:
+
+We include makefiles that should work as project files in DevStudio 6.0 or
+later.  There is a library makefile that builds the IJG library as a static
+Win32 library, and application makefiles that build the sample applications
+as Win32 console applications.  (Even if you only want the library, we
+recommend building the applications so that you can run the self-test.)
+
+To use:
+1. Copy jconfig.vc to jconfig.h, makejdsw.vc6 to jpeg.dsw,
+   makeadsw.vc6 to apps.dsw, makejmak.vc6 to jpeg.mak,
+   makejdep.vc6 to jpeg.dep, makejdsp.vc6 to jpeg.dsp,
+   makecmak.vc6 to cjpeg.mak, makecdep.vc6 to cjpeg.dep,
+   makecdsp.vc6 to cjpeg.dsp, makedmak.vc6 to djpeg.mak,
+   makeddep.vc6 to djpeg.dep, makeddsp.vc6 to djpeg.dsp,
+   maketmak.vc6 to jpegtran.mak, maketdep.vc6 to jpegtran.dep,
+   maketdsp.vc6 to jpegtran.dsp, makermak.vc6 to rdjpgcom.mak,
+   makerdep.vc6 to rdjpgcom.dep, makerdsp.vc6 to rdjpgcom.dsp,
+   makewmak.vc6 to wrjpgcom.mak, makewdep.vc6 to wrjpgcom.dep, and
+   makewdsp.vc6 to wrjpgcom.dsp.  (Note that the renaming is critical!)
+2. Click on jpeg.dsw and apps.dsw to load the project workspaces.
+   (If you are using DevStudio more recent than 6.0, you'll probably
+   get a message saying that the project files are being updated.)
+3. Build the library project, then the applications project.
+4. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
+5. To perform the self-test, execute the command line
+	NMAKE /f makefile.vc  test
+
+
+Microsoft Windows, Microsoft Visual C++ 2008 Developer Studio (v9):
+
+We include makefiles that should work as project files in Visual Studio
+2008 or later.  There is a library makefile that builds the IJG library
+as a static Win32 library, and application makefiles that build the sample
+applications as Win32 console applications.  (Even if you only want the
+library, we recommend building the applications so that you can run the
+self-test.)
+
+To use:
+1. Copy jconfig.vc to jconfig.h, makejsln.vc9 to jpeg.sln,
+   makeasln.vc9 to apps.sln, makejvcp.vc9 to jpeg.vcproj,
+   makecvcp.vc9 to cjpeg.vcproj, makedvcp.vc9 to djpeg.vcproj,
+   maketvcp.vc9 to jpegtran.vcproj, makervcp.vc9 to rdjpgcom.vcproj, and
+   makewvcp.vc9 to wrjpgcom.vcproj.  (Note that the renaming is critical!)
+2. Click on jpeg.sln and apps.sln to load the project solutions.
+   (If you are using Visual Studio more recent than 2008 (v9), you'll
+   probably get a message saying that the project files are being
+   updated.)
+3. Build the library project, then the applications project.
+4. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
+5. To perform the self-test, execute the command line
+	NMAKE /f makefile.vc  test
+
+
+OS/2, Borland C++:
+
+Watch out for optimization bugs in older Borland compilers; you may need
+to back off the optimization switch settings.  See the comments in
+makefile.bcc.
+
 
 SGI:
 

jaricom.c

@@ -0,0 +1,153 @@
+/*
+ * jaricom.c
+ *
+ * Developed 1997-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains probability estimation tables for common use in
+ * arithmetic entropy encoding and decoding routines.
+ *
+ * This data represents Table D.2 in the JPEG spec (ISO/IEC IS 10918-1
+ * and CCITT Recommendation ITU-T T.81) and Table 24 in the JBIG spec
+ * (ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+/* The following #define specifies the packing of the four components
+ * into the compact INT32 representation.
+ * Note that this formula must match the actual arithmetic encoder
+ * and decoder implementation.  The implementation has to be changed
+ * if this formula is changed.
+ * The current organization is leaned on Markus Kuhn's JBIG
+ * implementation (jbig_tab.c).
+ */
+
+#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b)
+
+const INT32 jpeg_aritab[113+1] = {
+/*
+ * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS
+ */
+  V(   0, 0x5a1d,   1,   1, 1 ),
+  V(   1, 0x2586,  14,   2, 0 ),
+  V(   2, 0x1114,  16,   3, 0 ),
+  V(   3, 0x080b,  18,   4, 0 ),
+  V(   4, 0x03d8,  20,   5, 0 ),
+  V(   5, 0x01da,  23,   6, 0 ),
+  V(   6, 0x00e5,  25,   7, 0 ),
+  V(   7, 0x006f,  28,   8, 0 ),
+  V(   8, 0x0036,  30,   9, 0 ),
+  V(   9, 0x001a,  33,  10, 0 ),
+  V(  10, 0x000d,  35,  11, 0 ),
+  V(  11, 0x0006,   9,  12, 0 ),
+  V(  12, 0x0003,  10,  13, 0 ),
+  V(  13, 0x0001,  12,  13, 0 ),
+  V(  14, 0x5a7f,  15,  15, 1 ),
+  V(  15, 0x3f25,  36,  16, 0 ),
+  V(  16, 0x2cf2,  38,  17, 0 ),
+  V(  17, 0x207c,  39,  18, 0 ),
+  V(  18, 0x17b9,  40,  19, 0 ),
+  V(  19, 0x1182,  42,  20, 0 ),
+  V(  20, 0x0cef,  43,  21, 0 ),
+  V(  21, 0x09a1,  45,  22, 0 ),
+  V(  22, 0x072f,  46,  23, 0 ),
+  V(  23, 0x055c,  48,  24, 0 ),
+  V(  24, 0x0406,  49,  25, 0 ),
+  V(  25, 0x0303,  51,  26, 0 ),
+  V(  26, 0x0240,  52,  27, 0 ),
+  V(  27, 0x01b1,  54,  28, 0 ),
+  V(  28, 0x0144,  56,  29, 0 ),
+  V(  29, 0x00f5,  57,  30, 0 ),
+  V(  30, 0x00b7,  59,  31, 0 ),
+  V(  31, 0x008a,  60,  32, 0 ),
+  V(  32, 0x0068,  62,  33, 0 ),
+  V(  33, 0x004e,  63,  34, 0 ),
+  V(  34, 0x003b,  32,  35, 0 ),
+  V(  35, 0x002c,  33,   9, 0 ),
+  V(  36, 0x5ae1,  37,  37, 1 ),
+  V(  37, 0x484c,  64,  38, 0 ),
+  V(  38, 0x3a0d,  65,  39, 0 ),
+  V(  39, 0x2ef1,  67,  40, 0 ),
+  V(  40, 0x261f,  68,  41, 0 ),
+  V(  41, 0x1f33,  69,  42, 0 ),
+  V(  42, 0x19a8,  70,  43, 0 ),
+  V(  43, 0x1518,  72,  44, 0 ),
+  V(  44, 0x1177,  73,  45, 0 ),
+  V(  45, 0x0e74,  74,  46, 0 ),
+  V(  46, 0x0bfb,  75,  47, 0 ),
+  V(  47, 0x09f8,  77,  48, 0 ),
+  V(  48, 0x0861,  78,  49, 0 ),
+  V(  49, 0x0706,  79,  50, 0 ),
+  V(  50, 0x05cd,  48,  51, 0 ),
+  V(  51, 0x04de,  50,  52, 0 ),
+  V(  52, 0x040f,  50,  53, 0 ),
+  V(  53, 0x0363,  51,  54, 0 ),
+  V(  54, 0x02d4,  52,  55, 0 ),
+  V(  55, 0x025c,  53,  56, 0 ),
+  V(  56, 0x01f8,  54,  57, 0 ),
+  V(  57, 0x01a4,  55,  58, 0 ),
+  V(  58, 0x0160,  56,  59, 0 ),
+  V(  59, 0x0125,  57,  60, 0 ),
+  V(  60, 0x00f6,  58,  61, 0 ),
+  V(  61, 0x00cb,  59,  62, 0 ),
+  V(  62, 0x00ab,  61,  63, 0 ),
+  V(  63, 0x008f,  61,  32, 0 ),
+  V(  64, 0x5b12,  65,  65, 1 ),
+  V(  65, 0x4d04,  80,  66, 0 ),
+  V(  66, 0x412c,  81,  67, 0 ),
+  V(  67, 0x37d8,  82,  68, 0 ),
+  V(  68, 0x2fe8,  83,  69, 0 ),
+  V(  69, 0x293c,  84,  70, 0 ),
+  V(  70, 0x2379,  86,  71, 0 ),
+  V(  71, 0x1edf,  87,  72, 0 ),
+  V(  72, 0x1aa9,  87,  73, 0 ),
+  V(  73, 0x174e,  72,  74, 0 ),
+  V(  74, 0x1424,  72,  75, 0 ),
+  V(  75, 0x119c,  74,  76, 0 ),
+  V(  76, 0x0f6b,  74,  77, 0 ),
+  V(  77, 0x0d51,  75,  78, 0 ),
+  V(  78, 0x0bb6,  77,  79, 0 ),
+  V(  79, 0x0a40,  77,  48, 0 ),
+  V(  80, 0x5832,  80,  81, 1 ),
+  V(  81, 0x4d1c,  88,  82, 0 ),
+  V(  82, 0x438e,  89,  83, 0 ),
+  V(  83, 0x3bdd,  90,  84, 0 ),
+  V(  84, 0x34ee,  91,  85, 0 ),
+  V(  85, 0x2eae,  92,  86, 0 ),
+  V(  86, 0x299a,  93,  87, 0 ),
+  V(  87, 0x2516,  86,  71, 0 ),
+  V(  88, 0x5570,  88,  89, 1 ),
+  V(  89, 0x4ca9,  95,  90, 0 ),
+  V(  90, 0x44d9,  96,  91, 0 ),
+  V(  91, 0x3e22,  97,  92, 0 ),
+  V(  92, 0x3824,  99,  93, 0 ),
+  V(  93, 0x32b4,  99,  94, 0 ),
+  V(  94, 0x2e17,  93,  86, 0 ),
+  V(  95, 0x56a8,  95,  96, 1 ),
+  V(  96, 0x4f46, 101,  97, 0 ),
+  V(  97, 0x47e5, 102,  98, 0 ),
+  V(  98, 0x41cf, 103,  99, 0 ),
+  V(  99, 0x3c3d, 104, 100, 0 ),
+  V( 100, 0x375e,  99,  93, 0 ),
+  V( 101, 0x5231, 105, 102, 0 ),
+  V( 102, 0x4c0f, 106, 103, 0 ),
+  V( 103, 0x4639, 107, 104, 0 ),
+  V( 104, 0x415e, 103,  99, 0 ),
+  V( 105, 0x5627, 105, 106, 1 ),
+  V( 106, 0x50e7, 108, 107, 0 ),
+  V( 107, 0x4b85, 109, 103, 0 ),
+  V( 108, 0x5597, 110, 109, 0 ),
+  V( 109, 0x504f, 111, 107, 0 ),
+  V( 110, 0x5a10, 110, 111, 1 ),
+  V( 111, 0x5522, 112, 109, 0 ),
+  V( 112, 0x59eb, 112, 111, 1 ),
+/*
+ * This last entry is used for fixed probability estimate of 0.5
+ * as recommended in Section 10.3 Table 5 of ITU-T Rec. T.851.
+ */
+  V( 113, 0x5a1d, 113, 113, 0 )
+};

jcapimin.c

@@ -1,7 +1,8 @@
 /*
  * jcapimin.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2003-2010 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,13 +40,18 @@ jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
     ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
 	     (int) SIZEOF(struct jpeg_compress_struct), (int) structsize);
 
-  /* For debugging purposes, zero the whole master structure.
-   * But error manager pointer is already there, so save and restore it.
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
    */
   {
     struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
     MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct));
     cinfo->err = err;
+    cinfo->client_data = client_data;
   }
   cinfo->is_decompressor = FALSE;
 
@@ -58,14 +64,23 @@ jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
 
   cinfo->comp_info = NULL;
 
-  for (i = 0; i < NUM_QUANT_TBLS; i++)
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
     cinfo->quant_tbl_ptrs[i] = NULL;
+    cinfo->q_scale_factor[i] = 100;
+  }
 
   for (i = 0; i < NUM_HUFF_TBLS; i++) {
     cinfo->dc_huff_tbl_ptrs[i] = NULL;
     cinfo->ac_huff_tbl_ptrs[i] = NULL;
   }
 
+  /* Must do it here for emit_dqt in case jpeg_write_tables is used */
+  cinfo->block_size = DCTSIZE;
+  cinfo->natural_order = jpeg_natural_order;
+  cinfo->lim_Se = DCTSIZE2-1;
+
+  cinfo->script_space = NULL;
+
   cinfo->input_gamma = 1.0;	/* in case application forgets */
 
   /* OK, I'm ready */
@@ -185,13 +200,40 @@ GLOBAL(void)
 jpeg_write_marker (j_compress_ptr cinfo, int marker,
 		   const JOCTET *dataptr, unsigned int datalen)
 {
+  JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val));
+
   if (cinfo->next_scanline != 0 ||
       (cinfo->global_state != CSTATE_SCANNING &&
        cinfo->global_state != CSTATE_RAW_OK &&
        cinfo->global_state != CSTATE_WRCOEFS))
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
-  (*cinfo->marker->write_any_marker) (cinfo, marker, dataptr, datalen);
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+  write_marker_byte = cinfo->marker->write_marker_byte;	/* copy for speed */
+  while (datalen--) {
+    (*write_marker_byte) (cinfo, *dataptr);
+    dataptr++;
+  }
+}
+
+/* Same, but piecemeal. */
+
+GLOBAL(void)
+jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
+{
+  if (cinfo->next_scanline != 0 ||
+      (cinfo->global_state != CSTATE_SCANNING &&
+       cinfo->global_state != CSTATE_RAW_OK &&
+       cinfo->global_state != CSTATE_WRCOEFS))
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+}
+
+GLOBAL(void)
+jpeg_write_m_byte (j_compress_ptr cinfo, int val)
+{
+  (*cinfo->marker->write_marker_byte) (cinfo, val);
 }
 
 
@@ -231,6 +273,16 @@ jpeg_write_tables (j_compress_ptr cinfo)
   (*cinfo->marker->write_tables_only) (cinfo);
   /* And clean up. */
   (*cinfo->dest->term_destination) (cinfo);
-  /* We can use jpeg_abort to release memory. */
-  jpeg_abort((j_common_ptr) cinfo);
+  /*
+   * In library releases up through v6a, we called jpeg_abort() here to free
+   * any working memory allocated by the destination manager and marker
+   * writer.  Some applications had a problem with that: they allocated space
+   * of their own from the library memory manager, and didn't want it to go
+   * away during write_tables.  So now we do nothing.  This will cause a
+   * memory leak if an app calls write_tables repeatedly without doing a full
+   * compression cycle or otherwise resetting the JPEG object.  However, that
+   * seems less bad than unexpectedly freeing memory in the normal case.
+   * An app that prefers the old behavior can call jpeg_abort for itself after
+   * each call to jpeg_write_tables().
+   */
 }

jcarith.c

@@ -0,0 +1,934 @@
+/*
+ * jcarith.c
+ *
+ * Developed 1997-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy encoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy encoder object for arithmetic encoding. */
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */
+  INT32 a;               /* A register, normalized size of coding interval */
+  INT32 sc;        /* counter for stacked 0xFF values which might overflow */
+  INT32 zc;          /* counter for pending 0x00 output values which might *
+                          * be discarded at the end ("Pacman" termination) */
+  int ct;  /* bit shift counter, determines when next byte will be written */
+  int buffer;                /* buffer for most recent output byte != 0xFF */
+
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+  int next_restart_num;		/* next restart number to write (0-7) */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_encoder;
+
+typedef arith_entropy_encoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+/* NOTE: Uncomment the following #define if you want to use the
+ * given formula for calculating the AC conditioning parameter Kx
+ * for spectral selection progressive coding in section G.1.3.2
+ * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4).
+ * Although the spec and P&M authors claim that this "has proven
+ * to give good results for 8 bit precision samples", I'm not
+ * convinced yet that this is really beneficial.
+ * Early tests gave only very marginal compression enhancements
+ * (a few - around 5 or so - bytes even for very large files),
+ * which would turn out rather negative if we'd suppress the
+ * DAC (Define Arithmetic Conditioning) marker segments for
+ * the default parameters in the future.
+ * Note that currently the marker writing module emits 12-byte
+ * DAC segments for a full-component scan in a color image.
+ * This is not worth worrying about IMHO. However, since the
+ * spec defines the default values to be used if the tables
+ * are omitted (unlike Huffman tables, which are required
+ * anyway), one might optimize this behaviour in the future,
+ * and then it would be disadvantageous to use custom tables if
+ * they don't provide sufficient gain to exceed the DAC size.
+ *
+ * On the other hand, I'd consider it as a reasonable result
+ * that the conditioning has no significant influence on the
+ * compression performance. This means that the basic
+ * statistical model is already rather stable.
+ *
+ * Thus, at the moment, we use the default conditioning values
+ * anyway, and do not use the custom formula.
+ *
+#define CALCULATE_SPECTRAL_CONDITIONING
+ */
+
+/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
+ * We assume that int right shift is unsigned if INT32 right shift is,
+ * which should be safe.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	int ishift_temp;
+#define IRIGHT_SHIFT(x,shft)  \
+	((ishift_temp = (x)) < 0 ? \
+	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
+	 (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+
+LOCAL(void)
+emit_byte (int val, j_compress_ptr cinfo)
+/* Write next output byte; we do not support suspension in this module. */
+{
+  struct jpeg_destination_mgr * dest = cinfo->dest;
+
+  *dest->next_output_byte++ = (JOCTET) val;
+  if (--dest->free_in_buffer == 0)
+    if (! (*dest->empty_output_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+}
+
+
+/*
+ * Finish up at the end of an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  INT32 temp;
+
+  /* Section D.1.8: Termination of encoding */
+
+  /* Find the e->c in the coding interval with the largest
+   * number of trailing zero bits */
+  if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c)
+    e->c = temp + 0x8000L;
+  else
+    e->c = temp;
+  /* Send remaining bytes to output */
+  e->c <<= e->ct;
+  if (e->c & 0xF8000000L) {
+    /* One final overflow has to be handled */
+    if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer + 1, cinfo);
+      if (e->buffer + 1 == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+    e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+    e->sc = 0;
+  } else {
+    if (e->buffer == 0)
+      ++e->zc;
+    else if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer, cinfo);
+    }
+    if (e->sc) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      do {
+	emit_byte(0xFF, cinfo);
+	emit_byte(0x00, cinfo);
+      } while (--e->sc);
+    }
+  }
+  /* Output final bytes only if they are not 0x00 */
+  if (e->c & 0x7FFF800L) {
+    if (e->zc)  /* output final pending zero bytes */
+      do emit_byte(0x00, cinfo);
+      while (--e->zc);
+    emit_byte((e->c >> 19) & 0xFF, cinfo);
+    if (((e->c >> 19) & 0xFF) == 0xFF)
+      emit_byte(0x00, cinfo);
+    if (e->c & 0x7F800L) {
+      emit_byte((e->c >> 11) & 0xFF, cinfo);
+      if (((e->c >> 11) & 0xFF) == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+  }
+}
+
+
+/*
+ * The core arithmetic encoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Parameter 'val' to be encoded may be 0 or 1 (binary decision).
+ *
+ * Note: I've added full "Pacman" termination support to the
+ * byte output routines, which is equivalent to the optional
+ * Discard_final_zeros procedure (Figure D.15) in the spec.
+ * Thus, we always produce the shortest possible output
+ * stream compliant to the spec (no trailing zero bytes,
+ * except for FF stuffing).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(void)
+arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) 
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv;
+
+  /* Fetch values from our compact representation of Table D.2:
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Encode & estimation procedures per sections D.1.4 & D.1.5 */
+  e->a -= qe;
+  if (val != (sv >> 7)) {
+    /* Encode the less probable symbol */
+    if (e->a >= qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency, otherwise code the LPS
+       * as usual: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+  } else {
+    /* Encode the more probable symbol */
+    if (e->a >= 0x8000L)
+      return;  /* A >= 0x8000 -> ready, no renormalization required */
+    if (e->a < qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+  }
+
+  /* Renormalization & data output per section D.1.6 */
+  do {
+    e->a <<= 1;
+    e->c <<= 1;
+    if (--e->ct == 0) {
+      /* Another byte is ready for output */
+      temp = e->c >> 19;
+      if (temp > 0xFF) {
+	/* Handle overflow over all stacked 0xFF bytes */
+	if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer + 1, cinfo);
+	  if (e->buffer + 1 == 0xFF)
+	    emit_byte(0x00, cinfo);
+	}
+	e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+	e->sc = 0;
+	/* Note: The 3 spacer bits in the C register guarantee
+	 * that the new buffer byte can't be 0xFF here
+	 * (see page 160 in the P&M JPEG book). */
+	e->buffer = temp & 0xFF;  /* new output byte, might overflow later */
+      } else if (temp == 0xFF) {
+	++e->sc;  /* stack 0xFF byte (which might overflow later) */
+      } else {
+	/* Output all stacked 0xFF bytes, they will not overflow any more */
+	if (e->buffer == 0)
+	  ++e->zc;
+	else if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer, cinfo);
+	}
+	if (e->sc) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  do {
+	    emit_byte(0xFF, cinfo);
+	    emit_byte(0x00, cinfo);
+	  } while (--e->sc);
+	}
+	e->buffer = temp & 0xFF;  /* new output byte (can still overflow) */
+      }
+      e->c &= 0x7FFFFL;
+      e->ct += 8;
+    }
+  } while (e->a < 0x8000L);
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(void)
+emit_restart (j_compress_ptr cinfo, int restart_num)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  finish_pass(cinfo);
+
+  emit_byte(0xFF, cinfo);
+  emit_byte(JPEG_RST0 + restart_num, cinfo);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+}
+
+
+/*
+ * MCU encoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl;
+  int v, v2, m;
+  ISHIFT_TEMPS
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Compute the DC value after the required point transform by Al.
+     * This is simply an arithmetic right shift.
+     */
+    m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al);
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = m - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = m;
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke;
+  int v, v2, m;
+  const int * natural_order;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  for (ke = cinfo->Se; ke > 0; ke--)
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+
+  /* Figure F.5: Encode_AC_Coefficients */
+  for (k = cinfo->Ss; k <= ke; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 0);		/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[natural_order[k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 0);
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 1);
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+    }
+    st += 2;
+    /* Figure F.8: Encoding the magnitude category of v */
+    m = 0;
+    if (v -= 1) {
+      arith_encode(cinfo, st, 1);
+      m = 1;
+      v2 = v;
+      if (v2 >>= 1) {
+	arith_encode(cinfo, st, 1);
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+    }
+    arith_encode(cinfo, st, 0);
+    /* Figure F.9: Encoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      arith_encode(cinfo, st, (m & v) ? 1 : 0);
+  }
+  /* Encode EOB decision only if k <= cinfo->Se */
+  if (k <= cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for DC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int Al, blkn;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  Al = cinfo->Al;
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* We simply emit the Al'th bit of the DC coefficient value. */
+    arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke, kex;
+  int v;
+  const int * natural_order;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Section G.1.3.3: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  for (ke = cinfo->Se; ke > 0; ke--)
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  for (kex = ke; kex > 0; kex--)
+    if ((v = (*block)[natural_order[kex]]) >= 0) {
+      if (v >>= cinfo->Ah) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Ah) break;
+    }
+
+  /* Figure G.10: Encode_AC_Coefficients_SA */
+  for (k = cinfo->Ss; k <= ke; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (k > kex)
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[natural_order[k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 0);
+	  }
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 1);
+	  }
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+    }
+  }
+  /* Encode EOB decision only if k <= cinfo->Se */
+  if (k <= cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  jpeg_component_info * compptr;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, k, ke;
+  int v, v2, m;
+  const int * natural_order;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = (*block)[0];
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+
+    /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+    tbl = compptr->ac_tbl_no;
+
+    /* Establish EOB (end-of-block) index */
+    for (ke = cinfo->lim_Se; ke > 0; ke--)
+      if ((*block)[natural_order[ke]]) break;
+
+    /* Figure F.5: Encode_AC_Coefficients */
+    for (k = 1; k <= ke; k++) {
+      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+      while ((v = (*block)[natural_order[k]]) == 0) {
+	arith_encode(cinfo, st + 1, 0); st += 3; k++;
+      }
+      arith_encode(cinfo, st + 1, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, entropy->fixed_bin, 0);
+      } else {
+	v = -v;
+	arith_encode(cinfo, entropy->fixed_bin, 1);
+      }
+      st += 2;
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	if (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (v2 >>= 1) {
+	    arith_encode(cinfo, st, 1);
+	    m <<= 1;
+	    st += 1;
+	  }
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+    /* Encode EOB decision only if k <= cinfo->lim_Se */
+    if (k <= cinfo->lim_Se) {
+      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+      arith_encode(cinfo, st, 1);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_compress_ptr cinfo, boolean gather_statistics)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (gather_statistics)
+    /* Make sure to avoid that in the master control logic!
+     * We are fully adaptive here and need no extra
+     * statistics gathering pass!
+     */
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+
+  /* We assume jcmaster.c already validated the progressive scan parameters. */
+
+  /* Select execution routines */
+  if (cinfo->progressive_mode) {
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_first;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_refine;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_refine;
+    }
+  } else
+    entropy->pub.encode_mcu = encode_mcu;
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+#ifdef CALCULATE_SPECTRAL_CONDITIONING
+      if (cinfo->progressive_mode)
+	/* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */
+	cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4);
+#endif
+    }
+  }
+
+  /* Initialize arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_arith_encoder (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_encoder));
+  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  entropy->pub.start_pass = start_pass;
+  entropy->pub.finish_pass = finish_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+}

jccoefct.c

@@ -1,7 +1,7 @@
 /*
  * jccoefct.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -135,8 +135,8 @@ start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
  * per call, ie, v_samp_factor block rows for each component in the image.
  * Returns TRUE if the iMCU row is completed, FALSE if suspended.
  *
- * NB: input_buf contains a plane for each component in image.
- * For single pass, this is the same as the components in the scan.
+ * NB: input_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
  */
 
 METHODDEF(boolean)
@@ -149,6 +149,7 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
   int blkn, bi, ci, yindex, yoffset, blockcnt;
   JDIMENSION ypos, xpos;
   jpeg_component_info *compptr;
+  forward_DCT_ptr forward_DCT;
 
   /* Loop to write as much as one whole iMCU row */
   for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
@@ -167,15 +168,18 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
       blkn = 0;
       for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
 	compptr = cinfo->cur_comp_info[ci];
+	forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index];
 	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
 						: compptr->last_col_width;
 	xpos = MCU_col_num * compptr->MCU_sample_width;
-	ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
+	ypos = yoffset * compptr->DCT_v_scaled_size;
+	/* ypos == (yoffset+yindex) * DCTSIZE */
 	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
 	  if (coef->iMCU_row_num < last_iMCU_row ||
 	      yoffset+yindex < compptr->last_row_height) {
-	    (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-					 input_buf[ci], coef->MCU_buffer[blkn],
+	    (*forward_DCT) (cinfo, compptr,
+			    input_buf[compptr->component_index],
+			    coef->MCU_buffer[blkn],
 			    ypos, xpos, (JDIMENSION) blockcnt);
 	    if (blockcnt < compptr->MCU_width) {
 	      /* Create some dummy blocks at the right edge of the image. */
@@ -194,7 +198,7 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
 	    }
 	  }
 	  blkn += compptr->MCU_width;
-	  ypos += DCTSIZE;
+	  ypos += compptr->DCT_v_scaled_size;
 	}
       }
       /* Try to write the MCU.  In event of a suspension failure, we will
@@ -251,6 +255,7 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
   jpeg_component_info *compptr;
   JBLOCKARRAY buffer;
   JBLOCKROW thisblockrow, lastblockrow;
+  forward_DCT_ptr forward_DCT;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
@@ -273,14 +278,14 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
     ndummy = (int) (blocks_across % h_samp_factor);
     if (ndummy > 0)
       ndummy = h_samp_factor - ndummy;
+    forward_DCT = cinfo->fdct->forward_DCT[ci];
     /* Perform DCT for all non-dummy blocks in this iMCU row.  Each call
      * on forward_DCT processes a complete horizontal row of DCT blocks.
      */
     for (block_row = 0; block_row < block_rows; block_row++) {
       thisblockrow = buffer[block_row];
-      (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-				   input_buf[ci], thisblockrow,
-				   (JDIMENSION) (block_row * DCTSIZE),
+      (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow,
+		      (JDIMENSION) (block_row * compptr->DCT_v_scaled_size),
 		      (JDIMENSION) 0, blocks_across);
       if (ndummy > 0) {
 	/* Create dummy blocks at the right edge of the image. */

jcdctmgr.c

@@ -23,7 +23,7 @@ typedef struct {
   struct jpeg_forward_dct pub;	/* public fields */
 
   /* Pointer to the DCT routine actually in use */
-  forward_DCT_method_ptr do_dct;
+  forward_DCT_method_ptr do_dct[MAX_COMPONENTS];
 
   /* The actual post-DCT divisors --- not identical to the quant table
    * entries, because of scaling (especially for an unnormalized DCT).
@@ -33,7 +33,7 @@ typedef struct {
 
 #ifdef DCT_FLOAT_SUPPORTED
   /* Same as above for the floating-point case. */
-  float_DCT_method_ptr do_float_dct;
+  float_DCT_method_ptr do_float_dct[MAX_COMPONENTS];
   FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
 #endif
 } my_fdct_controller;
@@ -41,131 +41,16 @@ typedef struct {
 typedef my_fdct_controller * my_fdct_ptr;
 
 
-/*
- * Initialize for a processing pass.
- * Verify that all referenced Q-tables are present, and set up
- * the divisor table for each one.
- * In the current implementation, DCT of all components is done during
- * the first pass, even if only some components will be output in the
- * first scan.  Hence all components should be examined here.
+/* The current scaled-DCT routines require ISLOW-style divisor tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
  */
-
-METHODDEF(void)
-start_pass_fdctmgr (j_compress_ptr cinfo)
-{
-  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  int ci, qtblno, i;
-  jpeg_component_info *compptr;
-  JQUANT_TBL * qtbl;
-  DCTELEM * dtbl;
-
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
-    qtblno = compptr->quant_tbl_no;
-    /* Make sure specified quantization table is present */
-    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
-	cinfo->quant_tbl_ptrs[qtblno] == NULL)
-      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
-    qtbl = cinfo->quant_tbl_ptrs[qtblno];
-    /* Compute divisors for this quant table */
-    /* We may do this more than once for same table, but it's not a big deal */
-    switch (cinfo->dct_method) {
 #ifdef DCT_ISLOW_SUPPORTED
-    case JDCT_ISLOW:
-      /* For LL&M IDCT method, divisors are equal to raw quantization
-       * coefficients multiplied by 8 (to counteract scaling).
-       */
-      if (fdct->divisors[qtblno] == NULL) {
-	fdct->divisors[qtblno] = (DCTELEM *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      DCTSIZE2 * SIZEOF(DCTELEM));
-      }
-      dtbl = fdct->divisors[qtblno];
-      for (i = 0; i < DCTSIZE2; i++) {
-	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
-      }
-      break;
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef DCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
 #endif
-#ifdef DCT_IFAST_SUPPORTED
-    case JDCT_IFAST:
-      {
-	/* For AA&N IDCT method, divisors are equal to quantization
-	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
-	 *   scalefactor[0] = 1
-	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
-	 * We apply a further scale factor of 8.
-	 */
-#define CONST_BITS 14
-	static const INT16 aanscales[DCTSIZE2] = {
-	  /* precomputed values scaled up by 14 bits */
-	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
-	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
-	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
-	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
-	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
-	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
-	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
-	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
-	};
-	SHIFT_TEMPS
-
-	if (fdct->divisors[qtblno] == NULL) {
-	  fdct->divisors[qtblno] = (DCTELEM *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(DCTELEM));
-	}
-	dtbl = fdct->divisors[qtblno];
-	for (i = 0; i < DCTSIZE2; i++) {
-	  dtbl[i] = (DCTELEM)
-	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
-				  (INT32) aanscales[i]),
-		    CONST_BITS-3);
-	}
-      }
-      break;
 #endif
-#ifdef DCT_FLOAT_SUPPORTED
-    case JDCT_FLOAT:
-      {
-	/* For float AA&N IDCT method, divisors are equal to quantization
-	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
-	 *   scalefactor[0] = 1
-	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
-	 * We apply a further scale factor of 8.
-	 * What's actually stored is 1/divisor so that the inner loop can
-	 * use a multiplication rather than a division.
-	 */
-	FAST_FLOAT * fdtbl;
-	int row, col;
-	static const double aanscalefactor[DCTSIZE] = {
-	  1.0, 1.387039845, 1.306562965, 1.175875602,
-	  1.0, 0.785694958, 0.541196100, 0.275899379
-	};
-
-	if (fdct->float_divisors[qtblno] == NULL) {
-	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(FAST_FLOAT));
-	}
-	fdtbl = fdct->float_divisors[qtblno];
-	i = 0;
-	for (row = 0; row < DCTSIZE; row++) {
-	  for (col = 0; col < DCTSIZE; col++) {
-	    fdtbl[i] = (FAST_FLOAT)
-	      (1.0 / (((double) qtbl->quantval[i] *
-		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
-	    i++;
-	  }
-	}
-      }
-      break;
-#endif
-    default:
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-      break;
-    }
-  }
-}
 
 
 /*
@@ -185,43 +70,16 @@ forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   /* This routine is heavily used, so it's worth coding it tightly. */
   my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  forward_DCT_method_ptr do_dct = fdct->do_dct;
+  forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index];
   DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
   DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
   JDIMENSION bi;
 
   sample_data += start_row;	/* fold in the vertical offset once */
 
-  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
-    /* Load data into workspace, applying unsigned->signed conversion */
-    { register DCTELEM *workspaceptr;
-      register JSAMPROW elemptr;
-      register int elemr;
-
-      workspaceptr = workspace;
-      for (elemr = 0; elemr < DCTSIZE; elemr++) {
-	elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8		/* unroll the inner loop */
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-#else
-	{ register int elemc;
-	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
-	    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	  }
-	}
-#endif
-      }
-    }
-
+  for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) {
     /* Perform the DCT */
-    (*do_dct) (workspace);
+    (*do_dct) (workspace, sample_data, start_col);
 
     /* Quantize/descale the coefficients, and store into coef_blocks[] */
     { register DCTELEM temp, qval;
@@ -275,44 +133,16 @@ forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   /* This routine is heavily used, so it's worth coding it tightly. */
   my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  float_DCT_method_ptr do_dct = fdct->do_float_dct;
+  float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index];
   FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
   FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
   JDIMENSION bi;
 
   sample_data += start_row;	/* fold in the vertical offset once */
 
-  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
-    /* Load data into workspace, applying unsigned->signed conversion */
-    { register FAST_FLOAT *workspaceptr;
-      register JSAMPROW elemptr;
-      register int elemr;
-
-      workspaceptr = workspace;
-      for (elemr = 0; elemr < DCTSIZE; elemr++) {
-	elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8		/* unroll the inner loop */
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-#else
-	{ register int elemc;
-	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
-	    *workspaceptr++ = (FAST_FLOAT)
-	      (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	  }
-	}
-#endif
-      }
-    }
-
+  for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) {
     /* Perform the DCT */
-    (*do_dct) (workspace);
+    (*do_dct) (workspace, sample_data, start_col);
 
     /* Quantize/descale the coefficients, and store into coef_blocks[] */
     { register FAST_FLOAT temp;
@@ -337,6 +167,295 @@ forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
 #endif /* DCT_FLOAT_SUPPORTED */
 
 
+/*
+ * Initialize for a processing pass.
+ * Verify that all referenced Q-tables are present, and set up
+ * the divisor table for each one.
+ * In the current implementation, DCT of all components is done during
+ * the first pass, even if only some components will be output in the
+ * first scan.  Hence all components should be examined here.
+ */
+
+METHODDEF(void)
+start_pass_fdctmgr (j_compress_ptr cinfo)
+{
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  int ci, qtblno, i;
+  jpeg_component_info *compptr;
+  int method = 0;
+  JQUANT_TBL * qtbl;
+  DCTELEM * dtbl;
+
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Select the proper DCT routine for this component's scaling */
+    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
+#ifdef DCT_SCALING_SUPPORTED
+    case ((1 << 8) + 1):
+      fdct->do_dct[ci] = jpeg_fdct_1x1;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_2x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((3 << 8) + 3):
+      fdct->do_dct[ci] = jpeg_fdct_3x3;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_4x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((5 << 8) + 5):
+      fdct->do_dct[ci] = jpeg_fdct_5x5;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_6x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((7 << 8) + 7):
+      fdct->do_dct[ci] = jpeg_fdct_7x7;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((9 << 8) + 9):
+      fdct->do_dct[ci] = jpeg_fdct_9x9;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((10 << 8) + 10):
+      fdct->do_dct[ci] = jpeg_fdct_10x10;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((11 << 8) + 11):
+      fdct->do_dct[ci] = jpeg_fdct_11x11;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((12 << 8) + 12):
+      fdct->do_dct[ci] = jpeg_fdct_12x12;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((13 << 8) + 13):
+      fdct->do_dct[ci] = jpeg_fdct_13x13;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((14 << 8) + 14):
+      fdct->do_dct[ci] = jpeg_fdct_14x14;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((15 << 8) + 15):
+      fdct->do_dct[ci] = jpeg_fdct_15x15;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((16 << 8) + 16):
+      fdct->do_dct[ci] = jpeg_fdct_16x16;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((16 << 8) + 8):
+      fdct->do_dct[ci] = jpeg_fdct_16x8;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((14 << 8) + 7):
+      fdct->do_dct[ci] = jpeg_fdct_14x7;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((12 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_12x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((10 << 8) + 5):
+      fdct->do_dct[ci] = jpeg_fdct_10x5;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((8 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_8x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 3):
+      fdct->do_dct[ci] = jpeg_fdct_6x3;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_4x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 1):
+      fdct->do_dct[ci] = jpeg_fdct_2x1;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((8 << 8) + 16):
+      fdct->do_dct[ci] = jpeg_fdct_8x16;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((7 << 8) + 14):
+      fdct->do_dct[ci] = jpeg_fdct_7x14;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 12):
+      fdct->do_dct[ci] = jpeg_fdct_6x12;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((5 << 8) + 10):
+      fdct->do_dct[ci] = jpeg_fdct_5x10;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 8):
+      fdct->do_dct[ci] = jpeg_fdct_4x8;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((3 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_3x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_2x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((1 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_1x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+#endif
+    case ((DCTSIZE << 8) + DCTSIZE):
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+	fdct->do_dct[ci] = jpeg_fdct_islow;
+	method = JDCT_ISLOW;
+	break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+	fdct->do_dct[ci] = jpeg_fdct_ifast;
+	method = JDCT_IFAST;
+	break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+	fdct->do_float_dct[ci] = jpeg_fdct_float;
+	method = JDCT_FLOAT;
+	break;
+#endif
+      default:
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+	break;
+      }
+      break;
+    default:
+      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
+      break;
+    }
+    qtblno = compptr->quant_tbl_no;
+    /* Make sure specified quantization table is present */
+    if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
+	cinfo->quant_tbl_ptrs[qtblno] == NULL)
+      ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
+    qtbl = cinfo->quant_tbl_ptrs[qtblno];
+    /* Compute divisors for this quant table */
+    /* We may do this more than once for same table, but it's not a big deal */
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
+    case JDCT_ISLOW:
+      /* For LL&M IDCT method, divisors are equal to raw quantization
+       * coefficients multiplied by 8 (to counteract scaling).
+       */
+      if (fdct->divisors[qtblno] == NULL) {
+	fdct->divisors[qtblno] = (DCTELEM *)
+	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				      DCTSIZE2 * SIZEOF(DCTELEM));
+      }
+      dtbl = fdct->divisors[qtblno];
+      for (i = 0; i < DCTSIZE2; i++) {
+	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
+      }
+      fdct->pub.forward_DCT[ci] = forward_DCT;
+      break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+    case JDCT_IFAST:
+      {
+	/* For AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 */
+#define CONST_BITS 14
+	static const INT16 aanscales[DCTSIZE2] = {
+	  /* precomputed values scaled up by 14 bits */
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  22725, 31521, 29692, 26722, 22725, 17855, 12299,  6270,
+	  21407, 29692, 27969, 25172, 21407, 16819, 11585,  5906,
+	  19266, 26722, 25172, 22654, 19266, 15137, 10426,  5315,
+	  16384, 22725, 21407, 19266, 16384, 12873,  8867,  4520,
+	  12873, 17855, 16819, 15137, 12873, 10114,  6967,  3552,
+	   8867, 12299, 11585, 10426,  8867,  6967,  4799,  2446,
+	   4520,  6270,  5906,  5315,  4520,  3552,  2446,  1247
+	};
+	SHIFT_TEMPS
+
+	if (fdct->divisors[qtblno] == NULL) {
+	  fdct->divisors[qtblno] = (DCTELEM *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(DCTELEM));
+	}
+	dtbl = fdct->divisors[qtblno];
+	for (i = 0; i < DCTSIZE2; i++) {
+	  dtbl[i] = (DCTELEM)
+	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
+				  (INT32) aanscales[i]),
+		    CONST_BITS-3);
+	}
+      }
+      fdct->pub.forward_DCT[ci] = forward_DCT;
+      break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+    case JDCT_FLOAT:
+      {
+	/* For float AA&N IDCT method, divisors are equal to quantization
+	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
+	 *   scalefactor[0] = 1
+	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 8.
+	 * What's actually stored is 1/divisor so that the inner loop can
+	 * use a multiplication rather than a division.
+	 */
+	FAST_FLOAT * fdtbl;
+	int row, col;
+	static const double aanscalefactor[DCTSIZE] = {
+	  1.0, 1.387039845, 1.306562965, 1.175875602,
+	  1.0, 0.785694958, 0.541196100, 0.275899379
+	};
+
+	if (fdct->float_divisors[qtblno] == NULL) {
+	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
+	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+					DCTSIZE2 * SIZEOF(FAST_FLOAT));
+	}
+	fdtbl = fdct->float_divisors[qtblno];
+	i = 0;
+	for (row = 0; row < DCTSIZE; row++) {
+	  for (col = 0; col < DCTSIZE; col++) {
+	    fdtbl[i] = (FAST_FLOAT)
+	      (1.0 / (((double) qtbl->quantval[i] *
+		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
+	    i++;
+	  }
+	}
+      }
+      fdct->pub.forward_DCT[ci] = forward_DCT_float;
+      break;
+#endif
+    default:
+      ERREXIT(cinfo, JERR_NOT_COMPILED);
+      break;
+    }
+  }
+}
+
+
 /*
  * Initialize FDCT manager.
  */
@@ -353,30 +472,6 @@ jinit_forward_dct (j_compress_ptr cinfo)
   cinfo->fdct = (struct jpeg_forward_dct *) fdct;
   fdct->pub.start_pass = start_pass_fdctmgr;
 
-  switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
-  case JDCT_ISLOW:
-    fdct->pub.forward_DCT = forward_DCT;
-    fdct->do_dct = jpeg_fdct_islow;
-    break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-  case JDCT_IFAST:
-    fdct->pub.forward_DCT = forward_DCT;
-    fdct->do_dct = jpeg_fdct_ifast;
-    break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-  case JDCT_FLOAT:
-    fdct->pub.forward_DCT = forward_DCT_float;
-    fdct->do_float_dct = jpeg_fdct_float;
-    break;
-#endif
-  default:
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-    break;
-  }
-
   /* Mark divisor tables unallocated */
   for (i = 0; i < NUM_QUANT_TBLS; i++) {
     fdct->divisors[i] = NULL;

jchuff.h

@@ -1,34 +0,0 @@
-/*
- * jchuff.h
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy encoding routines
- * that are shared between the sequential encoder (jchuff.c) and the
- * progressive encoder (jcphuff.c).  No other modules need to see these.
- */
-
-/* Derived data constructed for each Huffman table */
-
-typedef struct {
-  unsigned int ehufco[256];	/* code for each symbol */
-  char ehufsi[256];		/* length of code for each symbol */
-  /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */
-} c_derived_tbl;
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_c_derived_tbl	jMkCDerived
-#define jpeg_gen_optimal_table	jGenOptTbl
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_c_derived_tbl
-	JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, c_derived_tbl ** pdtbl));
-
-/* Generate an optimal table definition given the specified counts */
-EXTERN(void) jpeg_gen_optimal_table
-	JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]));

jcinit.c

@@ -1,7 +1,7 @@
 /*
  * jcinit.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -41,22 +41,15 @@ jinit_compress_master (j_compress_ptr cinfo)
   /* Forward DCT */
   jinit_forward_dct(cinfo);
   /* Entropy encoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-      jinit_phuff_encoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
+  if (cinfo->arith_code)
+    jinit_arith_encoder(cinfo);
+  else {
     jinit_huff_encoder(cinfo);
   }
 
   /* Need a full-image coefficient buffer in any multi-pass mode. */
   jinit_c_coef_controller(cinfo,
-			  (cinfo->num_scans > 1 || cinfo->optimize_coding));
+		(boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding));
   jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */);
 
   jinit_marker_writer(cinfo);

jcmainct.c

@@ -118,17 +118,17 @@ process_data_simple_main (j_compress_ptr cinfo,
 
   while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
     /* Read input data if we haven't filled the main buffer yet */
-    if (main->rowgroup_ctr < DCTSIZE)
+    if (main->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size)
       (*cinfo->prep->pre_process_data) (cinfo,
 					input_buf, in_row_ctr, in_rows_avail,
 					main->buffer, &main->rowgroup_ctr,
-					(JDIMENSION) DCTSIZE);
+					(JDIMENSION) cinfo->min_DCT_v_scaled_size);
 
     /* If we don't have a full iMCU row buffered, return to application for
      * more data.  Note that preprocessor will always pad to fill the iMCU row
      * at the bottom of the image.
      */
-    if (main->rowgroup_ctr != DCTSIZE)
+    if (main->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size)
       return;
 
     /* Send the completed row to the compressor */
@@ -269,10 +269,10 @@ jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
 	 ci++, compptr++) {
       main->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-	 compptr->width_in_blocks * DCTSIZE,
+	 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
 	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
 				(long) compptr->v_samp_factor) * DCTSIZE,
-	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
     }
 #else
     ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
@@ -286,8 +286,8 @@ jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
 	 ci++, compptr++) {
       main->buffer[ci] = (*cinfo->mem->alloc_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 compptr->width_in_blocks * DCTSIZE,
-	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+	 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
     }
   }
 }

jcmarker.c

@@ -1,7 +1,8 @@
 /*
  * jcmarker.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -81,6 +82,17 @@ typedef enum {			/* JPEG marker codes */
 } JPEG_MARKER;
 
 
+/* Private state */
+
+typedef struct {
+  struct jpeg_marker_writer pub; /* public fields */
+
+  unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */
+} my_marker_writer;
+
+typedef my_marker_writer * my_marker_ptr;
+
+
 /*
  * Basic output routines.
  *
@@ -142,24 +154,25 @@ emit_dqt (j_compress_ptr cinfo, int index)
     ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index);
 
   prec = 0;
-  for (i = 0; i < DCTSIZE2; i++) {
-    if (qtbl->quantval[i] > 255)
+  for (i = 0; i <= cinfo->lim_Se; i++) {
+    if (qtbl->quantval[cinfo->natural_order[i]] > 255)
       prec = 1;
   }
 
   if (! qtbl->sent_table) {
     emit_marker(cinfo, M_DQT);
 
-    emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2);
+    emit_2bytes(cinfo,
+      prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2);
 
     emit_byte(cinfo, index + (prec<<4));
 
-    for (i = 0; i < DCTSIZE2; i++) {
+    for (i = 0; i <= cinfo->lim_Se; i++) {
       /* The table entries must be emitted in zigzag order. */
-      unsigned int qval = qtbl->quantval[jpeg_natural_order[i]];
+      unsigned int qval = qtbl->quantval[cinfo->natural_order[i]];
       if (prec)
-	emit_byte(cinfo, qval >> 8);
-      emit_byte(cinfo, qval & 0xFF);
+	emit_byte(cinfo, (int) (qval >> 8));
+      emit_byte(cinfo, (int) (qval & 0xFF));
     }
 
     qtbl->sent_table = TRUE;
@@ -224,7 +237,11 @@ emit_dac (j_compress_ptr cinfo)
   
   for (i = 0; i < cinfo->comps_in_scan; i++) {
     compptr = cinfo->cur_comp_info[i];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0)
       dc_in_use[compptr->dc_tbl_no] = 1;
+    /* AC needs no table when not present */
+    if (cinfo->Se)
       ac_in_use[compptr->ac_tbl_no] = 1;
   }
   
@@ -274,13 +291,13 @@ emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
   emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */
 
   /* Make sure image isn't bigger than SOF field can handle */
-  if ((long) cinfo->image_height > 65535L ||
-      (long) cinfo->image_width > 65535L)
+  if ((long) cinfo->jpeg_height > 65535L ||
+      (long) cinfo->jpeg_width > 65535L)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535);
 
   emit_byte(cinfo, cinfo->data_precision);
-  emit_2bytes(cinfo, (int) cinfo->image_height);
-  emit_2bytes(cinfo, (int) cinfo->image_width);
+  emit_2bytes(cinfo, (int) cinfo->jpeg_height);
+  emit_2bytes(cinfo, (int) cinfo->jpeg_width);
 
   emit_byte(cinfo, cinfo->num_components);
 
@@ -309,22 +326,16 @@ emit_sos (j_compress_ptr cinfo)
   for (i = 0; i < cinfo->comps_in_scan; i++) {
     compptr = cinfo->cur_comp_info[i];
     emit_byte(cinfo, compptr->component_id);
-    td = compptr->dc_tbl_no;
-    ta = compptr->ac_tbl_no;
-    if (cinfo->progressive_mode) {
-      /* Progressive mode: only DC or only AC tables are used in one scan;
-       * furthermore, Huffman coding of DC refinement uses no table at all.
-       * We emit 0 for unused field(s); this is recommended by the P&M text
+
+    /* We emit 0 for unused field(s); this is recommended by the P&M text
      * but does not seem to be specified in the standard.
      */
-      if (cinfo->Ss == 0) {
-	ta = 0;			/* DC scan */
-	if (cinfo->Ah != 0 && !cinfo->arith_code)
-	  td = 0;		/* no DC table either */
-      } else {
-	td = 0;			/* AC scan */
-      }
-    }
+
+    /* DC needs no table for refinement scan */
+    td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0;
+    /* AC needs no table when not present */
+    ta = cinfo->Se ? compptr->ac_tbl_no : 0;
+
     emit_byte(cinfo, (td << 4) + ta);
   }
 
@@ -334,6 +345,22 @@ emit_sos (j_compress_ptr cinfo)
 }
 
 
+LOCAL(void)
+emit_pseudo_sos (j_compress_ptr cinfo)
+/* Emit a pseudo SOS marker */
+{
+  emit_marker(cinfo, M_SOS);
+  
+  emit_2bytes(cinfo, 2 + 1 + 3); /* length */
+  
+  emit_byte(cinfo, 0); /* Ns */
+
+  emit_byte(cinfo, 0); /* Ss */
+  emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */
+  emit_byte(cinfo, 0); /* Ah/Al */
+}
+
+
 LOCAL(void)
 emit_jfif_app0 (j_compress_ptr cinfo)
 /* Emit a JFIF-compliant APP0 marker */
@@ -342,7 +369,7 @@ emit_jfif_app0 (j_compress_ptr cinfo)
    * Length of APP0 block	(2 bytes)
    * Block ID			(4 bytes - ASCII "JFIF")
    * Zero byte			(1 byte to terminate the ID string)
-   * Version Major, Minor	(2 bytes - 0x01, 0x01)
+   * Version Major, Minor	(2 bytes - major first)
    * Units			(1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm)
    * Xdpu			(2 bytes - dots per unit horizontal)
    * Ydpu			(2 bytes - dots per unit vertical)
@@ -359,11 +386,8 @@ emit_jfif_app0 (j_compress_ptr cinfo)
   emit_byte(cinfo, 0x49);
   emit_byte(cinfo, 0x46);
   emit_byte(cinfo, 0);
-  /* We currently emit version code 1.01 since we use no 1.02 features.
-   * This may avoid complaints from some older decoders.
-   */
-  emit_byte(cinfo, 1);		/* Major version */
-  emit_byte(cinfo, 1);		/* Minor version */
+  emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */
+  emit_byte(cinfo, cinfo->JFIF_minor_version);
   emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */
   emit_2bytes(cinfo, (int) cinfo->X_density);
   emit_2bytes(cinfo, (int) cinfo->Y_density);
@@ -419,28 +443,30 @@ emit_adobe_app14 (j_compress_ptr cinfo)
 
 
 /*
- * This routine is exported for possible use by applications.
- * The intended use is to emit COM or APPn markers after calling
- * jpeg_start_compress() and before the first jpeg_write_scanlines() call
- * (hence, after write_file_header but before write_frame_header).
+ * These routines allow writing an arbitrary marker with parameters.
+ * The only intended use is to emit COM or APPn markers after calling
+ * write_file_header and before calling write_frame_header.
  * Other uses are not guaranteed to produce desirable results.
+ * Counting the parameter bytes properly is the caller's responsibility.
  */
 
 METHODDEF(void)
-write_any_marker (j_compress_ptr cinfo, int marker,
-		  const JOCTET *dataptr, unsigned int datalen)
-/* Emit an arbitrary marker with parameters */
+write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
+/* Emit an arbitrary marker header */
 {
-  if (datalen <= (unsigned int) 65533) { /* safety check */
+  if (datalen > (unsigned int) 65533)		/* safety check */
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   emit_marker(cinfo, (JPEG_MARKER) marker);
 
   emit_2bytes(cinfo, (int) (datalen + 2));	/* total length */
+}
 
-    while (datalen--) {
-      emit_byte(cinfo, *dataptr);
-      dataptr++;
-    }
-  }
+METHODDEF(void)
+write_marker_byte (j_compress_ptr cinfo, int val)
+/* Emit one byte of marker parameters following write_marker_header */
+{
+  emit_byte(cinfo, val);
 }
 
 
@@ -458,8 +484,13 @@ write_any_marker (j_compress_ptr cinfo, int marker,
 METHODDEF(void)
 write_file_header (j_compress_ptr cinfo)
 {
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
   emit_marker(cinfo, M_SOI);	/* first the SOI */
 
+  /* SOI is defined to reset restart interval to 0 */
+  marker->last_restart_interval = 0;
+
   if (cinfo->write_JFIF_header)	/* next an optional JFIF APP0 */
     emit_jfif_app0(cinfo);
   if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */
@@ -469,7 +500,7 @@ write_file_header (j_compress_ptr cinfo)
 
 /*
  * Write frame header.
- * This consists of DQT and SOFn markers.
+ * This consists of DQT and SOFn markers, and a conditional pseudo SOS marker.
  * Note that we do not emit the SOF until we have emitted the DQT(s).
  * This avoids compatibility problems with incorrect implementations that
  * try to error-check the quant table numbers as soon as they see the SOF.
@@ -496,7 +527,7 @@ write_frame_header (j_compress_ptr cinfo)
    * Note we assume that Huffman table numbers won't be changed later.
    */
   if (cinfo->arith_code || cinfo->progressive_mode ||
-      cinfo->data_precision != 8) {
+      cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) {
     is_baseline = FALSE;
   } else {
     is_baseline = TRUE;
@@ -514,7 +545,10 @@ write_frame_header (j_compress_ptr cinfo)
 
   /* Emit the proper SOF marker */
   if (cinfo->arith_code) {
-    emit_sof(cinfo, M_SOF9);	/* SOF code for arithmetic coding */
+    if (cinfo->progressive_mode)
+      emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */
+    else
+      emit_sof(cinfo, M_SOF9);  /* SOF code for sequential arithmetic */
   } else {
     if (cinfo->progressive_mode)
       emit_sof(cinfo, M_SOF2);	/* SOF code for progressive Huffman */
@@ -523,6 +557,10 @@ write_frame_header (j_compress_ptr cinfo)
     else
       emit_sof(cinfo, M_SOF1);	/* SOF code for non-baseline Huffman file */
   }
+
+  /* Check to emit pseudo SOS marker */
+  if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE)
+    emit_pseudo_sos(cinfo);
 }
 
 
@@ -535,6 +573,7 @@ write_frame_header (j_compress_ptr cinfo)
 METHODDEF(void)
 write_scan_header (j_compress_ptr cinfo)
 {
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
   int i;
   jpeg_component_info *compptr;
 
@@ -550,28 +589,22 @@ write_scan_header (j_compress_ptr cinfo)
      */
     for (i = 0; i < cinfo->comps_in_scan; i++) {
       compptr = cinfo->cur_comp_info[i];
-      if (cinfo->progressive_mode) {
-	/* Progressive mode: only DC or only AC tables are used in one scan */
-	if (cinfo->Ss == 0) {
-	  if (cinfo->Ah == 0)	/* DC needs no table for refinement scan */
+      /* DC needs no table for refinement scan */
+      if (cinfo->Ss == 0 && cinfo->Ah == 0)
 	emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
-	} else {
+      /* AC needs no table when not present */
+      if (cinfo->Se)
 	emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
     }
-      } else {
-	/* Sequential mode: need both DC and AC tables */
-	emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
-	emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
-      }
-    }
   }
 
   /* Emit DRI if required --- note that DRI value could change for each scan.
-   * If it doesn't, a tiny amount of space is wasted in multiple-scan files.
-   * We assume DRI will never be nonzero for one scan and zero for a later one.
+   * We avoid wasting space with unnecessary DRIs, however.
    */
-  if (cinfo->restart_interval)
+  if (cinfo->restart_interval != marker->last_restart_interval) {
     emit_dri(cinfo);
+    marker->last_restart_interval = cinfo->restart_interval;
+  }
 
   emit_sos(cinfo);
 }
@@ -627,15 +660,21 @@ write_tables_only (j_compress_ptr cinfo)
 GLOBAL(void)
 jinit_marker_writer (j_compress_ptr cinfo)
 {
+  my_marker_ptr marker;
+
   /* Create the subobject */
-  cinfo->marker = (struct jpeg_marker_writer *)
+  marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(struct jpeg_marker_writer));
+				SIZEOF(my_marker_writer));
+  cinfo->marker = (struct jpeg_marker_writer *) marker;
   /* Initialize method pointers */
-  cinfo->marker->write_any_marker = write_any_marker;
-  cinfo->marker->write_file_header = write_file_header;
-  cinfo->marker->write_frame_header = write_frame_header;
-  cinfo->marker->write_scan_header = write_scan_header;
-  cinfo->marker->write_file_trailer = write_file_trailer;
-  cinfo->marker->write_tables_only = write_tables_only;
+  marker->pub.write_file_header = write_file_header;
+  marker->pub.write_frame_header = write_frame_header;
+  marker->pub.write_scan_header = write_scan_header;
+  marker->pub.write_file_trailer = write_file_trailer;
+  marker->pub.write_tables_only = write_tables_only;
+  marker->pub.write_marker_header = write_marker_header;
+  marker->pub.write_marker_byte = write_marker_byte;
+  /* Initialize private state */
+  marker->last_restart_interval = 0;
 }

jcmaster.c

@@ -1,7 +1,8 @@
 /*
  * jcmaster.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2010 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -42,23 +43,200 @@ typedef my_comp_master * my_master_ptr;
  * Support routines that do various essential calculations.
  */
 
-LOCAL(void)
-initial_setup (j_compress_ptr cinfo)
+/*
+ * Compute JPEG image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo)
 /* Do computations that are needed before master selection phase */
 {
-  int ci;
+#ifdef DCT_SCALING_SUPPORTED
+
+  /* Compute actual JPEG image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num >= cinfo->scale_denom * 8) {
+    /* Provide 8/1 scaling */
+    cinfo->jpeg_width = cinfo->image_width << 3;
+    cinfo->jpeg_height = cinfo->image_height << 3;
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num >= cinfo->scale_denom * 4) {
+    /* Provide 4/1 scaling */
+    cinfo->jpeg_width = cinfo->image_width << 2;
+    cinfo->jpeg_height = cinfo->image_height << 2;
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * 8) {
+    /* Provide 8/3 scaling */
+    cinfo->jpeg_width = (cinfo->image_width << 1) + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 2, 3L);
+    cinfo->jpeg_height = (cinfo->image_height << 1) + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 2, 3L);
+    cinfo->min_DCT_h_scaled_size = 3;
+    cinfo->min_DCT_v_scaled_size = 3;
+  } else if (cinfo->scale_num >= cinfo->scale_denom * 2) {
+    /* Provide 2/1 scaling */
+    cinfo->jpeg_width = cinfo->image_width << 1;
+    cinfo->jpeg_height = cinfo->image_height << 1;
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * 8) {
+    /* Provide 8/5 scaling */
+    cinfo->jpeg_width = cinfo->image_width + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 3, 5L);
+    cinfo->jpeg_height = cinfo->image_height + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 3, 5L);
+    cinfo->min_DCT_h_scaled_size = 5;
+    cinfo->min_DCT_v_scaled_size = 5;
+  } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * 4) {
+    /* Provide 4/3 scaling */
+    cinfo->jpeg_width = cinfo->image_width + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width, 3L);
+    cinfo->jpeg_height = cinfo->image_height + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height, 3L);
+    cinfo->min_DCT_h_scaled_size = 6;
+    cinfo->min_DCT_v_scaled_size = 6;
+  } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * 8) {
+    /* Provide 8/7 scaling */
+    cinfo->jpeg_width = cinfo->image_width + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width, 7L);
+    cinfo->jpeg_height = cinfo->image_height + (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height, 7L);
+    cinfo->min_DCT_h_scaled_size = 7;
+    cinfo->min_DCT_v_scaled_size = 7;
+  } else if (cinfo->scale_num >= cinfo->scale_denom) {
+    /* Provide 1/1 scaling */
+    cinfo->jpeg_width = cinfo->image_width;
+    cinfo->jpeg_height = cinfo->image_height;
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * 8) {
+    /* Provide 8/9 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8, 9L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8, 9L);
+    cinfo->min_DCT_h_scaled_size = 9;
+    cinfo->min_DCT_v_scaled_size = 9;
+  } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * 4) {
+    /* Provide 4/5 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 4, 5L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 4, 5L);
+    cinfo->min_DCT_h_scaled_size = 10;
+    cinfo->min_DCT_v_scaled_size = 10;
+  } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * 8) {
+    /* Provide 8/11 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8, 11L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8, 11L);
+    cinfo->min_DCT_h_scaled_size = 11;
+    cinfo->min_DCT_v_scaled_size = 11;
+  } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * 2) {
+    /* Provide 2/3 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 2, 3L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 2, 3L);
+    cinfo->min_DCT_h_scaled_size = 12;
+    cinfo->min_DCT_v_scaled_size = 12;
+  } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * 8) {
+    /* Provide 8/13 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8, 13L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8, 13L);
+    cinfo->min_DCT_h_scaled_size = 13;
+    cinfo->min_DCT_v_scaled_size = 13;
+  } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * 4) {
+    /* Provide 4/7 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 4, 7L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 4, 7L);
+    cinfo->min_DCT_h_scaled_size = 14;
+    cinfo->min_DCT_v_scaled_size = 14;
+  } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * 8) {
+    /* Provide 8/15 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8, 15L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8, 15L);
+    cinfo->min_DCT_h_scaled_size = 15;
+    cinfo->min_DCT_v_scaled_size = 15;
+  } else {
+    /* Provide 1/2 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width, 2L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height, 2L);
+    cinfo->min_DCT_h_scaled_size = 16;
+    cinfo->min_DCT_v_scaled_size = 16;
+  }
+
+#else /* !DCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->jpeg_width = cinfo->image_width;
+  cinfo->jpeg_height = cinfo->image_height;
+  cinfo->min_DCT_h_scaled_size = DCTSIZE;
+  cinfo->min_DCT_v_scaled_size = DCTSIZE;
+
+#endif /* DCT_SCALING_SUPPORTED */
+}
+
+
+LOCAL(void)
+jpeg_calc_trans_dimensions (j_compress_ptr cinfo)
+{
+  if (cinfo->min_DCT_h_scaled_size < 1 || cinfo->min_DCT_h_scaled_size > 16
+      || cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size)
+    ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	     cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size);
+
+  cinfo->block_size = cinfo->min_DCT_h_scaled_size;
+
+  switch (cinfo->block_size) {
+  case 2: cinfo->natural_order = jpeg_natural_order2; break;
+  case 3: cinfo->natural_order = jpeg_natural_order3; break;
+  case 4: cinfo->natural_order = jpeg_natural_order4; break;
+  case 5: cinfo->natural_order = jpeg_natural_order5; break;
+  case 6: cinfo->natural_order = jpeg_natural_order6; break;
+  case 7: cinfo->natural_order = jpeg_natural_order7; break;
+  default: cinfo->natural_order = jpeg_natural_order; break;
+  }
+
+  cinfo->lim_Se = cinfo->block_size < DCTSIZE ?
+    cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1;
+}
+
+
+LOCAL(void)
+initial_setup (j_compress_ptr cinfo, boolean transcode_only)
+/* Do computations that are needed before master selection phase */
+{
+  int ci, ssize;
   jpeg_component_info *compptr;
   long samplesperrow;
   JDIMENSION jd_samplesperrow;
 
+  if (transcode_only)
+    jpeg_calc_trans_dimensions(cinfo);
+  else
+    jpeg_calc_jpeg_dimensions(cinfo);
+
   /* Sanity check on image dimensions */
-  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
-      || cinfo->num_components <= 0 || cinfo->input_components <= 0)
+  if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 ||
+      cinfo->num_components <= 0 || cinfo->input_components <= 0)
     ERREXIT(cinfo, JERR_EMPTY_IMAGE);
 
   /* Make sure image isn't bigger than I can handle */
-  if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
-      (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
+  if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION ||
+      (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
 
   /* Width of an input scanline must be representable as JDIMENSION. */
@@ -95,22 +273,52 @@ initial_setup (j_compress_ptr cinfo)
        ci++, compptr++) {
     /* Fill in the correct component_index value; don't rely on application */
     compptr->component_index = ci;
-    /* For compression, we never do DCT scaling. */
-    compptr->DCT_scaled_size = DCTSIZE;
+    /* In selecting the actual DCT scaling for each component, we try to
+     * scale down the chroma components via DCT scaling rather than downsampling.
+     * This saves time if the downsampler gets to use 1:1 scaling.
+     * Note this code adapts subsampling ratios which are powers of 2.
+     */
+    ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+    while (cinfo->min_DCT_h_scaled_size * ssize <=
+	   (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+#endif
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
+    ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+    while (cinfo->min_DCT_v_scaled_size * ssize <=
+	   (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+#endif
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
+
+    /* We don't support DCT ratios larger than 2. */
+    if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
+	compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
+    else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
+	compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
+
     /* Size in DCT blocks */
     compptr->width_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->height_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     /* Size in samples */
     compptr->downsampled_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) cinfo->max_h_samp_factor);
+      jdiv_round_up((long) cinfo->jpeg_width *
+		    (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->downsampled_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) cinfo->max_v_samp_factor);
+      jdiv_round_up((long) cinfo->jpeg_height *
+		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     /* Mark component needed (this flag isn't actually used for compression) */
     compptr->component_needed = TRUE;
   }
@@ -119,8 +327,8 @@ initial_setup (j_compress_ptr cinfo)
    * main controller will call coefficient controller).
    */
   cinfo->total_iMCU_rows = (JDIMENSION)
-    jdiv_round_up((long) cinfo->image_height,
-		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
+    jdiv_round_up((long) cinfo->jpeg_height,
+		  (long) (cinfo->max_v_samp_factor * cinfo->block_size));
 }
 
 
@@ -185,8 +393,20 @@ validate_script (j_compress_ptr cinfo)
     Al = scanptr->Al;
     if (cinfo->progressive_mode) {
 #ifdef C_PROGRESSIVE_SUPPORTED
+      /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
+       * seems wrong: the upper bound ought to depend on data precision.
+       * Perhaps they really meant 0..N+1 for N-bit precision.
+       * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
+       * out-of-range reconstructed DC values during the first DC scan,
+       * which might cause problems for some decoders.
+       */
+#if BITS_IN_JSAMPLE == 8
+#define MAX_AH_AL 10
+#else
+#define MAX_AH_AL 13
+#endif
       if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
-	  Ah < 0 || Ah > 13 || Al < 0 || Al > 13)
+	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
 	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
       if (Ss == 0) {
 	if (Se != 0)		/* DC and AC together not OK */
@@ -248,6 +468,39 @@ validate_script (j_compress_ptr cinfo)
   }
 }
 
+
+LOCAL(void)
+reduce_script (j_compress_ptr cinfo)
+/* Adapt scan script for use with reduced block size;
+ * assume that script has been validated before.
+ */
+{
+  jpeg_scan_info * scanptr;
+  int idxout, idxin;
+
+  /* Circumvent const declaration for this function */
+  scanptr = (jpeg_scan_info *) cinfo->scan_info;
+  idxout = 0;
+
+  for (idxin = 0; idxin < cinfo->num_scans; idxin++) {
+    /* After skipping, idxout becomes smaller than idxin */
+    if (idxin != idxout)
+      /* Copy rest of data;
+       * note we stay in given chunk of allocated memory.
+       */
+      scanptr[idxout] = scanptr[idxin];
+    if (scanptr[idxout].Ss > cinfo->lim_Se)
+      /* Entire scan out of range - skip this entry */
+      continue;
+    if (scanptr[idxout].Se > cinfo->lim_Se)
+      /* Limit scan to end of block */
+      scanptr[idxout].Se = cinfo->lim_Se;
+    idxout++;
+  }
+
+  cinfo->num_scans = idxout;
+}
+
 #endif /* C_MULTISCAN_FILES_SUPPORTED */
 
 
@@ -268,10 +521,13 @@ select_scan_parameters (j_compress_ptr cinfo)
       cinfo->cur_comp_info[ci] =
 	&cinfo->comp_info[scanptr->component_index[ci]];
     }
+    if (cinfo->progressive_mode) {
       cinfo->Ss = scanptr->Ss;
       cinfo->Se = scanptr->Se;
       cinfo->Ah = scanptr->Ah;
       cinfo->Al = scanptr->Al;
+      return;
+    }
   }
   else
 #endif
@@ -284,11 +540,11 @@ select_scan_parameters (j_compress_ptr cinfo)
     for (ci = 0; ci < cinfo->num_components; ci++) {
       cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
     }
+  }
   cinfo->Ss = 0;
-    cinfo->Se = DCTSIZE2-1;
+  cinfo->Se = cinfo->block_size * cinfo->block_size - 1;
   cinfo->Ah = 0;
   cinfo->Al = 0;
-  }
 }
 
 
@@ -313,7 +569,7 @@ per_scan_setup (j_compress_ptr cinfo)
     compptr->MCU_width = 1;
     compptr->MCU_height = 1;
     compptr->MCU_blocks = 1;
-    compptr->MCU_sample_width = DCTSIZE;
+    compptr->MCU_sample_width = compptr->DCT_h_scaled_size;
     compptr->last_col_width = 1;
     /* For noninterleaved scans, it is convenient to define last_row_height
      * as the number of block rows present in the last iMCU row.
@@ -335,11 +591,11 @@ per_scan_setup (j_compress_ptr cinfo)
     
     /* Overall image size in MCUs */
     cinfo->MCUs_per_row = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width,
-		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_width,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     cinfo->MCU_rows_in_scan = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height,
-		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_height,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     
     cinfo->blocks_in_MCU = 0;
     
@@ -349,7 +605,7 @@ per_scan_setup (j_compress_ptr cinfo)
       compptr->MCU_width = compptr->h_samp_factor;
       compptr->MCU_height = compptr->v_samp_factor;
       compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
-      compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size;
       /* Figure number of non-dummy blocks in last MCU column & row */
       tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
       if (tmp == 0) tmp = compptr->MCU_width;
@@ -421,7 +677,7 @@ prepare_for_pass (j_compress_ptr cinfo)
     /* Do Huffman optimization for a scan after the first one. */
     select_scan_parameters(cinfo);
     per_scan_setup(cinfo);
-    if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) {
+    if (cinfo->Ss != 0 || cinfo->Ah == 0) {
       (*cinfo->entropy->start_pass) (cinfo, TRUE);
       (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
       master->pub.call_pass_startup = FALSE;
@@ -542,11 +798,13 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
   master->pub.is_last_pass = FALSE;
 
   /* Validate parameters, determine derived values */
-  initial_setup(cinfo);
+  initial_setup(cinfo, transcode_only);
 
   if (cinfo->scan_info != NULL) {
 #ifdef C_MULTISCAN_FILES_SUPPORTED
     validate_script(cinfo);
+    if (cinfo->block_size < DCTSIZE)
+      reduce_script(cinfo);
 #else
     ERREXIT(cinfo, JERR_NOT_COMPILED);
 #endif
@@ -555,8 +813,10 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
     cinfo->num_scans = 1;
   }
 
-  if (cinfo->progressive_mode)	/*  TEMPORARY HACK ??? */
-    cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */
+  if ((cinfo->progressive_mode || cinfo->block_size < DCTSIZE) &&
+      !cinfo->arith_code)			/*  TEMPORARY HACK ??? */
+    /* assume default tables no good for progressive or downscale mode */
+    cinfo->optimize_coding = TRUE;
 
   /* Initialize my private state */
   if (transcode_only) {

jcomapi.c

@@ -1,7 +1,7 @@
 /*
  * jcomapi.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -30,6 +30,10 @@ jpeg_abort (j_common_ptr cinfo)
 {
   int pool;
 
+  /* Do nothing if called on a not-initialized or destroyed JPEG object. */
+  if (cinfo->mem == NULL)
+    return;
+
   /* Releasing pools in reverse order might help avoid fragmentation
    * with some (brain-damaged) malloc libraries.
    */
@@ -38,7 +42,15 @@ jpeg_abort (j_common_ptr cinfo)
   }
 
   /* Reset overall state for possible reuse of object */
-  cinfo->global_state = (cinfo->is_decompressor ? DSTATE_START : CSTATE_START);
+  if (cinfo->is_decompressor) {
+    cinfo->global_state = DSTATE_START;
+    /* Try to keep application from accessing now-deleted marker list.
+     * A bit kludgy to do it here, but this is the most central place.
+     */
+    ((j_decompress_ptr) cinfo)->marker_list = NULL;
+  } else {
+    cinfo->global_state = CSTATE_START;
+  }
 }
 
 

jconfig.bcc

@@ -1,5 +1,5 @@
 /* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jconfig.cfg

@@ -1,5 +1,5 @@
 /* jconfig.cfg --- source file edited by configure script */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #undef HAVE_PROTOTYPES
 #undef HAVE_UNSIGNED_CHAR
@@ -9,6 +9,7 @@
 #undef CHAR_IS_UNSIGNED
 #undef HAVE_STDDEF_H
 #undef HAVE_STDLIB_H
+#undef HAVE_LOCALE_H
 #undef NEED_BSD_STRINGS
 #undef NEED_SYS_TYPES_H
 #undef NEED_FAR_POINTERS

jconfig.dj

@@ -1,5 +1,5 @@
 /* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jconfig.mac

@@ -0,0 +1,43 @@
+/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define USE_MAC_MEMMGR		/* Define this if you use jmemmac.c */
+
+#define ALIGN_TYPE long		/* Needed for 680x0 Macs */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define USE_CCOMMAND		/* Command line reader for Macintosh */
+#define TWO_FILE_COMMANDLINE	/* Binary I/O thru stdin/stdout doesn't work */
+
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.manx

@@ -1,5 +1,5 @@
 /* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jconfig.mc6

@@ -1,5 +1,5 @@
 /* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jconfig.sas

@@ -1,5 +1,5 @@
 /* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jconfig.st

@@ -1,5 +1,5 @@
 /* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jconfig.txt

@@ -1,5 +1,5 @@
 /*
- * jconfig.doc
+ * jconfig.txt
  *
  * Copyright (C) 1991-1994, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
@@ -24,7 +24,7 @@
  */
 
 /* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
+ * (If not, you also need to use ansi2knr, see install.txt)
  */
 #define HAVE_PROTOTYPES
 

jconfig.vc

@@ -0,0 +1,45 @@
+/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* we presume a 32-bit flat memory model */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define "boolean" as unsigned char, not int, per Windows custom */
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Microsoft has setmode() */
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.vms

@@ -1,5 +1,5 @@
 /* jconfig.vms --- jconfig.h for use on Digital VMS. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jconfig.wat

@@ -1,5 +1,5 @@
 /* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
+/* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
 #define HAVE_UNSIGNED_CHAR

jcparam.c

@@ -1,7 +1,8 @@
 /*
  * jcparam.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2008 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -29,7 +30,7 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
  * are limited to 1..255 for JPEG baseline compatibility.
  */
 {
-  JQUANT_TBL ** qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
+  JQUANT_TBL ** qtblptr;
   int i;
   long temp;
 
@@ -37,6 +38,11 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
   if (cinfo->global_state != CSTATE_START)
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
+  if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS)
+    ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl);
+
+  qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
+
   if (*qtblptr == NULL)
     *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo);
 
@@ -55,6 +61,47 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
 }
 
 
+/* These are the sample quantization tables given in JPEG spec section K.1.
+ * The spec says that the values given produce "good" quality, and
+ * when divided by 2, "very good" quality.
+ */
+static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
+  16,  11,  10,  16,  24,  40,  51,  61,
+  12,  12,  14,  19,  26,  58,  60,  55,
+  14,  13,  16,  24,  40,  57,  69,  56,
+  14,  17,  22,  29,  51,  87,  80,  62,
+  18,  22,  37,  56,  68, 109, 103,  77,
+  24,  35,  55,  64,  81, 104, 113,  92,
+  49,  64,  78,  87, 103, 121, 120, 101,
+  72,  92,  95,  98, 112, 100, 103,  99
+};
+static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
+  17,  18,  24,  47,  99,  99,  99,  99,
+  18,  21,  26,  66,  99,  99,  99,  99,
+  24,  26,  56,  99,  99,  99,  99,  99,
+  47,  66,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99
+};
+
+
+GLOBAL(void)
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables
+ * and straight percentage-scaling quality scales.
+ * This entry point allows different scalings for luminance and chrominance.
+ */
+{
+  /* Set up two quantization tables using the specified scaling */
+  jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
+		       cinfo->q_scale_factor[0], force_baseline);
+  jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
+		       cinfo->q_scale_factor[1], force_baseline);
+}
+
+
 GLOBAL(void)
 jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
 			 boolean force_baseline)
@@ -64,31 +111,6 @@ jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
  * applications that insist on a linear percentage scaling.
  */
 {
-  /* These are the sample quantization tables given in JPEG spec section K.1.
-   * The spec says that the values given produce "good" quality, and
-   * when divided by 2, "very good" quality.
-   */
-  static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
-    16,  11,  10,  16,  24,  40,  51,  61,
-    12,  12,  14,  19,  26,  58,  60,  55,
-    14,  13,  16,  24,  40,  57,  69,  56,
-    14,  17,  22,  29,  51,  87,  80,  62,
-    18,  22,  37,  56,  68, 109, 103,  77,
-    24,  35,  55,  64,  81, 104, 113,  92,
-    49,  64,  78,  87, 103, 121, 120, 101,
-    72,  92,  95,  98, 112, 100, 103,  99
-  };
-  static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
-    17,  18,  24,  47,  99,  99,  99,  99,
-    18,  21,  26,  66,  99,  99,  99,  99,
-    24,  26,  56,  99,  99,  99,  99,  99,
-    47,  66,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99
-  };
-
   /* Set up two quantization tables using the specified scaling */
   jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
 		       scale_factor, force_baseline);
@@ -148,11 +170,25 @@ add_huff_table (j_compress_ptr cinfo,
 		JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val)
 /* Define a Huffman table */
 {
+  int nsymbols, len;
+
   if (*htblptr == NULL)
     *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
 
+  /* Copy the number-of-symbols-of-each-code-length counts */
   MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
-  MEMCOPY((*htblptr)->huffval, val, SIZEOF((*htblptr)->huffval));
+
+  /* Validate the counts.  We do this here mainly so we can copy the right
+   * number of symbols from the val[] array, without risking marching off
+   * the end of memory.  jchuff.c will do a more thorough test later.
+   */
+  nsymbols = 0;
+  for (len = 1; len <= 16; len++)
+    nsymbols += bits[len];
+  if (nsymbols < 1 || nsymbols > 256)
+    ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+
+  MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8));
 
   /* Initialize sent_table FALSE so table will be written to JPEG file. */
   (*htblptr)->sent_table = FALSE;
@@ -265,6 +301,8 @@ jpeg_set_defaults (j_compress_ptr cinfo)
 
   /* Initialize everything not dependent on the color space */
 
+  cinfo->scale_num = 1;		/* 1:1 scaling */
+  cinfo->scale_denom = 1;
   cinfo->data_precision = BITS_IN_JSAMPLE;
   /* Set up two quantization tables using default quality of 75 */
   jpeg_set_quality(cinfo, 75, TRUE);
@@ -301,6 +339,9 @@ jpeg_set_defaults (j_compress_ptr cinfo)
   /* By default, use the simpler non-cosited sampling alignment */
   cinfo->CCIR601_sampling = FALSE;
 
+  /* By default, apply fancy downsampling */
+  cinfo->do_fancy_downsampling = TRUE;
+
   /* No input smoothing */
   cinfo->smoothing_factor = 0;
 
@@ -313,7 +354,15 @@ jpeg_set_defaults (j_compress_ptr cinfo)
 
   /* Fill in default JFIF marker parameters.  Note that whether the marker
    * will actually be written is determined by jpeg_set_colorspace.
+   *
+   * By default, the library emits JFIF version code 1.01.
+   * An application that wants to emit JFIF 1.02 extension markers should set
+   * JFIF_minor_version to 2.  We could probably get away with just defaulting
+   * to 1.02, but there may still be some decoders in use that will complain
+   * about that; saying 1.01 should minimize compatibility problems.
    */
+  cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
+  cinfo->JFIF_minor_version = 1;
   cinfo->density_unit = 0;	/* Pixel size is unknown by default */
   cinfo->X_density = 1;		/* Pixel aspect ratio is square by default */
   cinfo->Y_density = 1;
@@ -529,11 +578,20 @@ jpeg_simple_progression (j_compress_ptr cinfo)
       nscans = 2 + 4 * ncomps;	/* 2 DC scans; 4 AC scans per component */
   }
 
-  /* Allocate space for script. */
-  /* We use permanent pool just in case application re-uses script. */
-  scanptr = (jpeg_scan_info *)
+  /* Allocate space for script.
+   * We need to put it in the permanent pool in case the application performs
+   * multiple compressions without changing the settings.  To avoid a memory
+   * leak if jpeg_simple_progression is called repeatedly for the same JPEG
+   * object, we try to re-use previously allocated space, and we allocate
+   * enough space to handle YCbCr even if initially asked for grayscale.
+   */
+  if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
+    cinfo->script_space_size = MAX(nscans, 10);
+    cinfo->script_space = (jpeg_scan_info *)
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
-				nscans * SIZEOF(jpeg_scan_info));
+			cinfo->script_space_size * SIZEOF(jpeg_scan_info));
+  }
+  scanptr = cinfo->script_space;
   cinfo->scan_info = scanptr;
   cinfo->num_scans = nscans;
 

jcphuff.c

@@ -1,829 +0,0 @@
-/*
- * jcphuff.c
- *
- * Copyright (C) 1995-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy encoding routines for progressive JPEG.
- *
- * We do not support output suspension in this module, since the library
- * currently does not allow multiple-scan files to be written with output
- * suspension.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jchuff.h"		/* Declarations shared with jchuff.c */
-
-#ifdef C_PROGRESSIVE_SUPPORTED
-
-/* Expanded entropy encoder object for progressive Huffman encoding. */
-
-typedef struct {
-  struct jpeg_entropy_encoder pub; /* public fields */
-
-  /* Mode flag: TRUE for optimization, FALSE for actual data output */
-  boolean gather_statistics;
-
-  /* Bit-level coding status.
-   * next_output_byte/free_in_buffer are local copies of cinfo->dest fields.
-   */
-  JOCTET * next_output_byte;	/* => next byte to write in buffer */
-  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
-  INT32 put_buffer;		/* current bit-accumulation buffer */
-  int put_bits;			/* # of bits now in it */
-  j_compress_ptr cinfo;		/* link to cinfo (needed for dump_buffer) */
-
-  /* Coding status for DC components */
-  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-
-  /* Coding status for AC components */
-  int ac_tbl_no;		/* the table number of the single component */
-  unsigned int EOBRUN;		/* run length of EOBs */
-  unsigned int BE;		/* # of buffered correction bits before MCU */
-  char * bit_buffer;		/* buffer for correction bits (1 per char) */
-  /* packing correction bits tightly would save some space but cost time... */
-
-  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
-  int next_restart_num;		/* next restart number to write (0-7) */
-
-  /* Pointers to derived tables (these workspaces have image lifespan).
-   * Since any one scan codes only DC or only AC, we only need one set
-   * of tables, not one for DC and one for AC.
-   */
-  c_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
-
-  /* Statistics tables for optimization; again, one set is enough */
-  long * count_ptrs[NUM_HUFF_TBLS];
-} phuff_entropy_encoder;
-
-typedef phuff_entropy_encoder * phuff_entropy_ptr;
-
-/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit
- * buffer can hold.  Larger sizes may slightly improve compression, but
- * 1000 is already well into the realm of overkill.
- * The minimum safe size is 64 bits.
- */
-
-#define MAX_CORR_BITS  1000	/* Max # of correction bits I can buffer */
-
-/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
- * We assume that int right shift is unsigned if INT32 right shift is,
- * which should be safe.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define ISHIFT_TEMPS	int ishift_temp;
-#define IRIGHT_SHIFT(x,shft)  \
-	((ishift_temp = (x)) < 0 ? \
-	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
-	 (ishift_temp >> (shft)))
-#else
-#define ISHIFT_TEMPS
-#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
-#endif
-
-/* Forward declarations */
-METHODDEF(boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo));
-METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo));
-
-
-/*
- * Initialize for a Huffman-compressed scan using progressive JPEG.
- */
-
-METHODDEF(void)
-start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics)
-{  
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band;
-  int ci, tbl;
-  jpeg_component_info * compptr;
-
-  entropy->cinfo = cinfo;
-  entropy->gather_statistics = gather_statistics;
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* We assume jcmaster.c already validated the scan parameters. */
-
-  /* Select execution routines */
-  if (cinfo->Ah == 0) {
-    if (is_DC_band)
-      entropy->pub.encode_mcu = encode_mcu_DC_first;
-    else
-      entropy->pub.encode_mcu = encode_mcu_AC_first;
-  } else {
-    if (is_DC_band)
-      entropy->pub.encode_mcu = encode_mcu_DC_refine;
-    else {
-      entropy->pub.encode_mcu = encode_mcu_AC_refine;
-      /* AC refinement needs a correction bit buffer */
-      if (entropy->bit_buffer == NULL)
-	entropy->bit_buffer = (char *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      MAX_CORR_BITS * SIZEOF(char));
-    }
-  }
-  if (gather_statistics)
-    entropy->pub.finish_pass = finish_pass_gather_phuff;
-  else
-    entropy->pub.finish_pass = finish_pass_phuff;
-
-  /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1
-   * for AC coefficients.
-   */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    /* Initialize DC predictions to 0 */
-    entropy->last_dc_val[ci] = 0;
-    /* Make sure requested tables are present */
-    /* (In gather mode, tables need not be allocated yet) */
-    if (is_DC_band) {
-      if (cinfo->Ah != 0)	/* DC refinement needs no table */
-	continue;
-      tbl = compptr->dc_tbl_no;
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-	  (cinfo->dc_huff_tbl_ptrs[tbl] == NULL && !gather_statistics))
-	ERREXIT1(cinfo,JERR_NO_HUFF_TABLE, tbl);
-    } else {
-      entropy->ac_tbl_no = tbl = compptr->ac_tbl_no;
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-          (cinfo->ac_huff_tbl_ptrs[tbl] == NULL && !gather_statistics))
-        ERREXIT1(cinfo,JERR_NO_HUFF_TABLE, tbl);
-    }
-    if (gather_statistics) {
-      /* Allocate and zero the statistics tables */
-      /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
-      if (entropy->count_ptrs[tbl] == NULL)
-	entropy->count_ptrs[tbl] = (long *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      257 * SIZEOF(long));
-      MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long));
-    } else {
-      /* Compute derived values for Huffman tables */
-      /* We may do this more than once for a table, but it's not expensive */
-      if (is_DC_band)
-        jpeg_make_c_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[tbl],
-				& entropy->derived_tbls[tbl]);
-      else
-        jpeg_make_c_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[tbl],
-				& entropy->derived_tbls[tbl]);
-    }
-  }
-
-  /* Initialize AC stuff */
-  entropy->EOBRUN = 0;
-  entropy->BE = 0;
-
-  /* Initialize bit buffer to empty */
-  entropy->put_buffer = 0;
-  entropy->put_bits = 0;
-
-  /* Initialize restart stuff */
-  entropy->restarts_to_go = cinfo->restart_interval;
-  entropy->next_restart_num = 0;
-}
-
-
-/* Outputting bytes to the file.
- * NB: these must be called only when actually outputting,
- * that is, entropy->gather_statistics == FALSE.
- */
-
-/* Emit a byte */
-#define emit_byte(entropy,val)  \
-	{ *(entropy)->next_output_byte++ = (JOCTET) (val);  \
-	  if (--(entropy)->free_in_buffer == 0)  \
-	    dump_buffer(entropy); }
-
-
-LOCAL(void)
-dump_buffer (phuff_entropy_ptr entropy)
-/* Empty the output buffer; we do not support suspension in this module. */
-{
-  struct jpeg_destination_mgr * dest = entropy->cinfo->dest;
-
-  if (! (*dest->empty_output_buffer) (entropy->cinfo))
-    ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND);
-  /* After a successful buffer dump, must reset buffer pointers */
-  entropy->next_output_byte = dest->next_output_byte;
-  entropy->free_in_buffer = dest->free_in_buffer;
-}
-
-
-/* Outputting bits to the file */
-
-/* Only the right 24 bits of put_buffer are used; the valid bits are
- * left-justified in this part.  At most 16 bits can be passed to emit_bits
- * in one call, and we never retain more than 7 bits in put_buffer
- * between calls, so 24 bits are sufficient.
- */
-
-INLINE
-LOCAL(void)
-emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size)
-/* Emit some bits, unless we are in gather mode */
-{
-  /* This routine is heavily used, so it's worth coding tightly. */
-  register INT32 put_buffer = (INT32) code;
-  register int put_bits = entropy->put_bits;
-
-  /* if size is 0, caller used an invalid Huffman table entry */
-  if (size == 0)
-    ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
-
-  if (entropy->gather_statistics)
-    return;			/* do nothing if we're only getting stats */
-
-  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
-  
-  put_bits += size;		/* new number of bits in buffer */
-  
-  put_buffer <<= 24 - put_bits; /* align incoming bits */
-
-  put_buffer |= entropy->put_buffer; /* and merge with old buffer contents */
-
-  while (put_bits >= 8) {
-    int c = (int) ((put_buffer >> 16) & 0xFF);
-    
-    emit_byte(entropy, c);
-    if (c == 0xFF) {		/* need to stuff a zero byte? */
-      emit_byte(entropy, 0);
-    }
-    put_buffer <<= 8;
-    put_bits -= 8;
-  }
-
-  entropy->put_buffer = put_buffer; /* update variables */
-  entropy->put_bits = put_bits;
-}
-
-
-LOCAL(void)
-flush_bits (phuff_entropy_ptr entropy)
-{
-  emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */
-  entropy->put_buffer = 0;     /* and reset bit-buffer to empty */
-  entropy->put_bits = 0;
-}
-
-
-/*
- * Emit (or just count) a Huffman symbol.
- */
-
-INLINE
-LOCAL(void)
-emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol)
-{
-  if (entropy->gather_statistics)
-    entropy->count_ptrs[tbl_no][symbol]++;
-  else {
-    c_derived_tbl * tbl = entropy->derived_tbls[tbl_no];
-    emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]);
-  }
-}
-
-
-/*
- * Emit bits from a correction bit buffer.
- */
-
-LOCAL(void)
-emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart,
-		    unsigned int nbits)
-{
-  if (entropy->gather_statistics)
-    return;			/* no real work */
-
-  while (nbits > 0) {
-    emit_bits(entropy, (unsigned int) (*bufstart), 1);
-    bufstart++;
-    nbits--;
-  }
-}
-
-
-/*
- * Emit any pending EOBRUN symbol.
- */
-
-LOCAL(void)
-emit_eobrun (phuff_entropy_ptr entropy)
-{
-  register int temp, nbits;
-
-  if (entropy->EOBRUN > 0) {	/* if there is any pending EOBRUN */
-    temp = entropy->EOBRUN;
-    nbits = 0;
-    while ((temp >>= 1))
-      nbits++;
-
-    emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4);
-    if (nbits)
-      emit_bits(entropy, entropy->EOBRUN, nbits);
-
-    entropy->EOBRUN = 0;
-
-    /* Emit any buffered correction bits */
-    emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE);
-    entropy->BE = 0;
-  }
-}
-
-
-/*
- * Emit a restart marker & resynchronize predictions.
- */
-
-LOCAL(void)
-emit_restart (phuff_entropy_ptr entropy, int restart_num)
-{
-  int ci;
-
-  emit_eobrun(entropy);
-
-  if (! entropy->gather_statistics) {
-    flush_bits(entropy);
-    emit_byte(entropy, 0xFF);
-    emit_byte(entropy, JPEG_RST0 + restart_num);
-  }
-
-  if (entropy->cinfo->Ss == 0) {
-    /* Re-initialize DC predictions to 0 */
-    for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++)
-      entropy->last_dc_val[ci] = 0;
-  } else {
-    /* Re-initialize all AC-related fields to 0 */
-    entropy->EOBRUN = 0;
-    entropy->BE = 0;
-  }
-}
-
-
-/*
- * MCU encoding for DC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp, temp2;
-  register int nbits;
-  int blkn, ci;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-  jpeg_component_info * compptr;
-  ISHIFT_TEMPS
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data blocks */
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-
-    /* Compute the DC value after the required point transform by Al.
-     * This is simply an arithmetic right shift.
-     */
-    temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al);
-
-    /* DC differences are figured on the point-transformed values. */
-    temp = temp2 - entropy->last_dc_val[ci];
-    entropy->last_dc_val[ci] = temp2;
-
-    /* Encode the DC coefficient difference per section G.1.2.1 */
-    temp2 = temp;
-    if (temp < 0) {
-      temp = -temp;		/* temp is abs value of input */
-      /* For a negative input, want temp2 = bitwise complement of abs(input) */
-      /* This code assumes we are on a two's complement machine */
-      temp2--;
-    }
-    
-    /* Find the number of bits needed for the magnitude of the coefficient */
-    nbits = 0;
-    while (temp) {
-      nbits++;
-      temp >>= 1;
-    }
-    
-    /* Count/emit the Huffman-coded symbol for the number of bits */
-    emit_symbol(entropy, compptr->dc_tbl_no, nbits);
-    
-    /* Emit that number of bits of the value, if positive, */
-    /* or the complement of its magnitude, if negative. */
-    if (nbits)			/* emit_bits rejects calls with size 0 */
-      emit_bits(entropy, (unsigned int) temp2, nbits);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for AC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp, temp2;
-  register int nbits;
-  register int r, k;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data block */
-  block = MCU_data[0];
-
-  /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */
-  
-  r = 0;			/* r = run length of zeros */
-   
-  for (k = cinfo->Ss; k <= Se; k++) {
-    if ((temp = (*block)[jpeg_natural_order[k]]) == 0) {
-      r++;
-      continue;
-    }
-    /* We must apply the point transform by Al.  For AC coefficients this
-     * is an integer division with rounding towards 0.  To do this portably
-     * in C, we shift after obtaining the absolute value; so the code is
-     * interwoven with finding the abs value (temp) and output bits (temp2).
-     */
-    if (temp < 0) {
-      temp = -temp;		/* temp is abs value of input */
-      temp >>= Al;		/* apply the point transform */
-      /* For a negative coef, want temp2 = bitwise complement of abs(coef) */
-      temp2 = ~temp;
-    } else {
-      temp >>= Al;		/* apply the point transform */
-      temp2 = temp;
-    }
-    /* Watch out for case that nonzero coef is zero after point transform */
-    if (temp == 0) {
-      r++;
-      continue;
-    }
-
-    /* Emit any pending EOBRUN */
-    if (entropy->EOBRUN > 0)
-      emit_eobrun(entropy);
-    /* if run length > 15, must emit special run-length-16 codes (0xF0) */
-    while (r > 15) {
-      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
-      r -= 16;
-    }
-
-    /* Find the number of bits needed for the magnitude of the coefficient */
-    nbits = 1;			/* there must be at least one 1 bit */
-    while ((temp >>= 1))
-      nbits++;
-
-    /* Count/emit Huffman symbol for run length / number of bits */
-    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits);
-
-    /* Emit that number of bits of the value, if positive, */
-    /* or the complement of its magnitude, if negative. */
-    emit_bits(entropy, (unsigned int) temp2, nbits);
-
-    r = 0;			/* reset zero run length */
-  }
-
-  if (r > 0) {			/* If there are trailing zeroes, */
-    entropy->EOBRUN++;		/* count an EOB */
-    if (entropy->EOBRUN == 0x7FFF)
-      emit_eobrun(entropy);	/* force it out to avoid overflow */
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
- * is not very clear on the point.
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp;
-  int blkn;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data blocks */
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-
-    /* We simply emit the Al'th bit of the DC coefficient value. */
-    temp = (*block)[0];
-    emit_bits(entropy, (unsigned int) (temp >> Al), 1);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for AC successive approximation refinement scan.
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp;
-  register int r, k;
-  int EOB;
-  char *BR_buffer;
-  unsigned int BR;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-  int absvalues[DCTSIZE2];
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data block */
-  block = MCU_data[0];
-
-  /* It is convenient to make a pre-pass to determine the transformed
-   * coefficients' absolute values and the EOB position.
-   */
-  EOB = 0;
-  for (k = cinfo->Ss; k <= Se; k++) {
-    temp = (*block)[jpeg_natural_order[k]];
-    /* We must apply the point transform by Al.  For AC coefficients this
-     * is an integer division with rounding towards 0.  To do this portably
-     * in C, we shift after obtaining the absolute value.
-     */
-    if (temp < 0)
-      temp = -temp;		/* temp is abs value of input */
-    temp >>= Al;		/* apply the point transform */
-    absvalues[k] = temp;	/* save abs value for main pass */
-    if (temp == 1)
-      EOB = k;			/* EOB = index of last newly-nonzero coef */
-  }
-
-  /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */
-  
-  r = 0;			/* r = run length of zeros */
-  BR = 0;			/* BR = count of buffered bits added now */
-  BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */
-
-  for (k = cinfo->Ss; k <= Se; k++) {
-    if ((temp = absvalues[k]) == 0) {
-      r++;
-      continue;
-    }
-
-    /* Emit any required ZRLs, but not if they can be folded into EOB */
-    while (r > 15 && k <= EOB) {
-      /* emit any pending EOBRUN and the BE correction bits */
-      emit_eobrun(entropy);
-      /* Emit ZRL */
-      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
-      r -= 16;
-      /* Emit buffered correction bits that must be associated with ZRL */
-      emit_buffered_bits(entropy, BR_buffer, BR);
-      BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
-      BR = 0;
-    }
-
-    /* If the coef was previously nonzero, it only needs a correction bit.
-     * NOTE: a straight translation of the spec's figure G.7 would suggest
-     * that we also need to test r > 15.  But if r > 15, we can only get here
-     * if k > EOB, which implies that this coefficient is not 1.
-     */
-    if (temp > 1) {
-      /* The correction bit is the next bit of the absolute value. */
-      BR_buffer[BR++] = (char) (temp & 1);
-      continue;
-    }
-
-    /* Emit any pending EOBRUN and the BE correction bits */
-    emit_eobrun(entropy);
-
-    /* Count/emit Huffman symbol for run length / number of bits */
-    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1);
-
-    /* Emit output bit for newly-nonzero coef */
-    temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1;
-    emit_bits(entropy, (unsigned int) temp, 1);
-
-    /* Emit buffered correction bits that must be associated with this code */
-    emit_buffered_bits(entropy, BR_buffer, BR);
-    BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
-    BR = 0;
-    r = 0;			/* reset zero run length */
-  }
-
-  if (r > 0 || BR > 0) {	/* If there are trailing zeroes, */
-    entropy->EOBRUN++;		/* count an EOB */
-    entropy->BE += BR;		/* concat my correction bits to older ones */
-    /* We force out the EOB if we risk either:
-     * 1. overflow of the EOB counter;
-     * 2. overflow of the correction bit buffer during the next MCU.
-     */
-    if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1))
-      emit_eobrun(entropy);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * Finish up at the end of a Huffman-compressed progressive scan.
- */
-
-METHODDEF(void)
-finish_pass_phuff (j_compress_ptr cinfo)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Flush out any buffered data */
-  emit_eobrun(entropy);
-  flush_bits(entropy);
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-}
-
-
-/*
- * Finish up a statistics-gathering pass and create the new Huffman tables.
- */
-
-METHODDEF(void)
-finish_pass_gather_phuff (j_compress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band;
-  int ci, tbl;
-  jpeg_component_info * compptr;
-  JHUFF_TBL **htblptr;
-  boolean did[NUM_HUFF_TBLS];
-
-  /* Flush out buffered data (all we care about is counting the EOB symbol) */
-  emit_eobrun(entropy);
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* It's important not to apply jpeg_gen_optimal_table more than once
-   * per table, because it clobbers the input frequency counts!
-   */
-  MEMZERO(did, SIZEOF(did));
-
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    if (is_DC_band) {
-      if (cinfo->Ah != 0)	/* DC refinement needs no table */
-	continue;
-      tbl = compptr->dc_tbl_no;
-    } else {
-      tbl = compptr->ac_tbl_no;
-    }
-    if (! did[tbl]) {
-      if (is_DC_band)
-        htblptr = & cinfo->dc_huff_tbl_ptrs[tbl];
-      else
-        htblptr = & cinfo->ac_huff_tbl_ptrs[tbl];
-      if (*htblptr == NULL)
-        *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]);
-      did[tbl] = TRUE;
-    }
-  }
-}
-
-
-/*
- * Module initialization routine for progressive Huffman entropy encoding.
- */
-
-GLOBAL(void)
-jinit_phuff_encoder (j_compress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy;
-  int i;
-
-  entropy = (phuff_entropy_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(phuff_entropy_encoder));
-  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
-  entropy->pub.start_pass = start_pass_phuff;
-
-  /* Mark tables unallocated */
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    entropy->derived_tbls[i] = NULL;
-    entropy->count_ptrs[i] = NULL;
-  }
-  entropy->bit_buffer = NULL;	/* needed only in AC refinement scan */
-}
-
-#endif /* C_PROGRESSIVE_SUPPORTED */

jcprepct.c

@@ -173,10 +173,12 @@ pre_process_data (j_compress_ptr cinfo,
 	*out_row_group_ctr < out_row_groups_avail) {
       for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	   ci++, compptr++) {
+	numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		  cinfo->min_DCT_v_scaled_size;
 	expand_bottom_edge(output_buf[ci],
-			   compptr->width_in_blocks * DCTSIZE,
-			   (int) (*out_row_group_ctr * compptr->v_samp_factor),
-			   (int) (out_row_groups_avail * compptr->v_samp_factor));
+			   compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+			   (int) (*out_row_group_ctr * numrows),
+			   (int) (out_row_groups_avail * numrows));
       }
       *out_row_group_ctr = out_row_groups_avail;
       break;			/* can exit outer loop without test */
@@ -288,7 +290,8 @@ create_context_buffer (j_compress_ptr cinfo)
      */
     true_buffer = (*cinfo->mem->alloc_sarray)
       ((j_common_ptr) cinfo, JPOOL_IMAGE,
-       (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
+       (JDIMENSION) (((long) compptr->width_in_blocks *
+		      cinfo->min_DCT_h_scaled_size *
 		      cinfo->max_h_samp_factor) / compptr->h_samp_factor),
        (JDIMENSION) (3 * rgroup_height));
     /* Copy true buffer row pointers into the middle of the fake row array */
@@ -346,7 +349,8 @@ jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer)
 	 ci++, compptr++) {
       prep->color_buf[ci] = (*cinfo->mem->alloc_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
+	 (JDIMENSION) (((long) compptr->width_in_blocks *
+			cinfo->min_DCT_h_scaled_size *
 			cinfo->max_h_samp_factor) / compptr->h_samp_factor),
 	 (JDIMENSION) cinfo->max_v_samp_factor);
     }

jcsample.c

@@ -62,6 +62,15 @@ typedef struct {
 
   /* Downsampling method pointers, one per component */
   downsample1_ptr methods[MAX_COMPONENTS];
+
+  /* Height of an output row group for each component. */
+  int rowgroup_height[MAX_COMPONENTS];
+
+  /* These arrays save pixel expansion factors so that int_downsample need not
+   * recompute them each time.  They are unused for other downsampling methods.
+   */
+  UINT8 h_expand[MAX_COMPONENTS];
+  UINT8 v_expand[MAX_COMPONENTS];
 } my_downsampler;
 
 typedef my_downsampler * my_downsample_ptr;
@@ -123,7 +132,8 @@ sep_downsample (j_compress_ptr cinfo,
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     in_ptr = input_buf[ci] + in_row_index;
-    out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor);
+    out_ptr = output_buf[ci] +
+	      (out_row_group_index * downsample->rowgroup_height[ci]);
     (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr);
   }
 }
@@ -140,14 +150,15 @@ METHODDEF(void)
 int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 		JSAMPARRAY input_data, JSAMPARRAY output_data)
 {
+  my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
   int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v;
   JDIMENSION outcol, outcol_h;	/* outcol_h == outcol*h_expand */
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   JSAMPROW inptr, outptr;
   INT32 outvalue;
 
-  h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor;
-  v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor;
+  h_expand = downsample->h_expand[compptr->component_index];
+  v_expand = downsample->v_expand[compptr->component_index];
   numpix = h_expand * v_expand;
   numpix2 = numpix/2;
 
@@ -158,8 +169,8 @@ int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   expand_right_edge(input_data, cinfo->max_v_samp_factor,
 		    cinfo->image_width, output_cols * h_expand);
 
-  inrow = 0;
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
     outptr = output_data[outrow];
     for (outcol = 0, outcol_h = 0; outcol < output_cols;
 	 outcol++, outcol_h += h_expand) {
@@ -173,6 +184,7 @@ int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
       *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix);
     }
     inrow += v_expand;
+    outrow++;
   }
 }
 
@@ -191,8 +203,8 @@ fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   jcopy_sample_rows(input_data, 0, output_data, 0,
 		    cinfo->max_v_samp_factor, cinfo->image_width);
   /* Edge-expand */
-  expand_right_edge(output_data, cinfo->max_v_samp_factor,
-		    cinfo->image_width, compptr->width_in_blocks * DCTSIZE);
+  expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width,
+		    compptr->width_in_blocks * compptr->DCT_h_scaled_size);
 }
 
 
@@ -212,9 +224,9 @@ METHODDEF(void)
 h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 		 JSAMPARRAY input_data, JSAMPARRAY output_data)
 {
-  int outrow;
+  int inrow;
   JDIMENSION outcol;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr, outptr;
   register int bias;
 
@@ -225,9 +237,9 @@ h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   expand_right_edge(input_data, cinfo->max_v_samp_factor,
 		    cinfo->image_width, output_cols * 2);
 
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
-    outptr = output_data[outrow];
-    inptr = input_data[outrow];
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    outptr = output_data[inrow];
+    inptr = input_data[inrow];
     bias = 0;			/* bias = 0,1,0,1,... for successive samples */
     for (outcol = 0; outcol < output_cols; outcol++) {
       *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1])
@@ -251,7 +263,7 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   int inrow, outrow;
   JDIMENSION outcol;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr0, inptr1, outptr;
   register int bias;
 
@@ -262,8 +274,8 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   expand_right_edge(input_data, cinfo->max_v_samp_factor,
 		    cinfo->image_width, output_cols * 2);
 
-  inrow = 0;
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
     outptr = output_data[outrow];
     inptr0 = input_data[inrow];
     inptr1 = input_data[inrow+1];
@@ -276,6 +288,7 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
       inptr0 += 2; inptr1 += 2;
     }
     inrow += 2;
+    outrow++;
   }
 }
 
@@ -294,7 +307,7 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   int inrow, outrow;
   JDIMENSION colctr;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr;
   INT32 membersum, neighsum, memberscale, neighscale;
 
@@ -321,8 +334,8 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */
   neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */
 
-  inrow = 0;
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
     outptr = output_data[outrow];
     inptr0 = input_data[inrow];
     inptr1 = input_data[inrow+1];
@@ -378,6 +391,7 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
     *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
 
     inrow += 2;
+    outrow++;
   }
 }
 
@@ -392,9 +406,9 @@ METHODDEF(void)
 fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
 			    JSAMPARRAY input_data, JSAMPARRAY output_data)
 {
-  int outrow;
+  int inrow;
   JDIMENSION colctr;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr, above_ptr, below_ptr, outptr;
   INT32 membersum, neighsum, memberscale, neighscale;
   int colsum, lastcolsum, nextcolsum;
@@ -415,11 +429,11 @@ fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
   memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */
   neighscale = cinfo->smoothing_factor * 64; /* scaled SF */
 
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
-    outptr = output_data[outrow];
-    inptr = input_data[outrow];
-    above_ptr = input_data[outrow-1];
-    below_ptr = input_data[outrow+1];
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    outptr = output_data[inrow];
+    inptr = input_data[inrow];
+    above_ptr = input_data[inrow-1];
+    below_ptr = input_data[inrow+1];
 
     /* Special case for first column */
     colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) +
@@ -467,6 +481,7 @@ jinit_downsampler (j_compress_ptr cinfo)
   int ci;
   jpeg_component_info * compptr;
   boolean smoothok = TRUE;
+  int h_in_group, v_in_group, h_out_group, v_out_group;
 
   downsample = (my_downsample_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
@@ -482,8 +497,17 @@ jinit_downsampler (j_compress_ptr cinfo)
   /* Verify we can handle the sampling factors, and set up method pointers */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    if (compptr->h_samp_factor == cinfo->max_h_samp_factor &&
-	compptr->v_samp_factor == cinfo->max_v_samp_factor) {
+    /* Compute size of an "output group" for DCT scaling.  This many samples
+     * are to be converted from max_h_samp_factor * max_v_samp_factor pixels.
+     */
+    h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) /
+		  cinfo->min_DCT_h_scaled_size;
+    v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		  cinfo->min_DCT_v_scaled_size;
+    h_in_group = cinfo->max_h_samp_factor;
+    v_in_group = cinfo->max_v_samp_factor;
+    downsample->rowgroup_height[ci] = v_out_group; /* save for use later */
+    if (h_in_group == h_out_group && v_in_group == v_out_group) {
 #ifdef INPUT_SMOOTHING_SUPPORTED
       if (cinfo->smoothing_factor) {
 	downsample->methods[ci] = fullsize_smooth_downsample;
@@ -491,12 +515,12 @@ jinit_downsampler (j_compress_ptr cinfo)
       } else
 #endif
 	downsample->methods[ci] = fullsize_downsample;
-    } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
-	       compptr->v_samp_factor == cinfo->max_v_samp_factor) {
+    } else if (h_in_group == h_out_group * 2 &&
+	       v_in_group == v_out_group) {
       smoothok = FALSE;
       downsample->methods[ci] = h2v1_downsample;
-    } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
-	       compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) {
+    } else if (h_in_group == h_out_group * 2 &&
+	       v_in_group == v_out_group * 2) {
 #ifdef INPUT_SMOOTHING_SUPPORTED
       if (cinfo->smoothing_factor) {
 	downsample->methods[ci] = h2v2_smooth_downsample;
@@ -504,10 +528,12 @@ jinit_downsampler (j_compress_ptr cinfo)
       } else
 #endif
 	downsample->methods[ci] = h2v2_downsample;
-    } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 &&
-	       (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) {
+    } else if ((h_in_group % h_out_group) == 0 &&
+	       (v_in_group % v_out_group) == 0) {
       smoothok = FALSE;
       downsample->methods[ci] = int_downsample;
+      downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group);
+      downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group);
     } else
       ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
   }

jctrans.c

@@ -1,7 +1,8 @@
 /*
  * jctrans.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-1998, Thomas G. Lane.
+ * Modified 2000-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -76,6 +77,10 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
   dstinfo->image_height = srcinfo->image_height;
   dstinfo->input_components = srcinfo->num_components;
   dstinfo->in_color_space = srcinfo->jpeg_color_space;
+  dstinfo->jpeg_width = srcinfo->output_width;
+  dstinfo->jpeg_height = srcinfo->output_height;
+  dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size;
+  dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size;
   /* Initialize all parameters to default values */
   jpeg_set_defaults(dstinfo);
   /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
@@ -129,6 +134,23 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
      * instead we rely on jpeg_set_colorspace to have made a suitable choice.
      */
   }
+  /* Also copy JFIF version and resolution information, if available.
+   * Strictly speaking this isn't "critical" info, but it's nearly
+   * always appropriate to copy it if available.  In particular,
+   * if the application chooses to copy JFIF 1.02 extension markers from
+   * the source file, we need to copy the version to make sure we don't
+   * emit a file that has 1.02 extensions but a claimed version of 1.01.
+   * We will *not*, however, copy version info from mislabeled "2.01" files.
+   */
+  if (srcinfo->saw_JFIF_marker) {
+    if (srcinfo->JFIF_major_version == 1) {
+      dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
+      dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
+    }
+    dstinfo->density_unit = srcinfo->density_unit;
+    dstinfo->X_density = srcinfo->X_density;
+    dstinfo->Y_density = srcinfo->Y_density;
+  }
 }
 
 
@@ -141,24 +163,13 @@ LOCAL(void)
 transencode_master_selection (j_compress_ptr cinfo,
 			      jvirt_barray_ptr * coef_arrays)
 {
-  /* Although we don't actually use input_components for transcoding,
-   * jcmaster.c's initial_setup will complain if input_components is 0.
-   */
-  cinfo->input_components = 1;
   /* Initialize master control (includes parameter checking/processing) */
   jinit_c_master_control(cinfo, TRUE /* transcode only */);
 
   /* Entropy encoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-      jinit_phuff_encoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
+  if (cinfo->arith_code)
+    jinit_arith_encoder(cinfo);
+  else {
     jinit_huff_encoder(cinfo);
   }
 
@@ -170,7 +181,7 @@ transencode_master_selection (j_compress_ptr cinfo,
   /* We can now tell the memory manager to allocate virtual arrays. */
   (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
 
-  /* Write the datastream header (SOI) immediately.
+  /* Write the datastream header (SOI, JFIF) immediately.
    * Frame and scan headers are postponed till later.
    * This lets application insert special markers after the SOI.
    */

jdapimin.c

@@ -1,7 +1,8 @@
 /*
  * jdapimin.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,13 +40,18 @@ jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
     ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
 	     (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize);
 
-  /* For debugging purposes, zero the whole master structure.
-   * But error manager pointer is already there, so save and restore it.
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
    */
   {
     struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
     MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct));
     cinfo->err = err;
+    cinfo->client_data = client_data;
   }
   cinfo->is_decompressor = TRUE;
 
@@ -67,6 +73,7 @@ jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
   /* Initialize marker processor so application can override methods
    * for COM, APPn markers before calling jpeg_read_header.
    */
+  cinfo->marker_list = NULL;
   jinit_marker_reader(cinfo);
 
   /* And initialize the overall input controller. */
@@ -100,23 +107,6 @@ jpeg_abort_decompress (j_decompress_ptr cinfo)
 }
 
 
-/*
- * Install a special processing method for COM or APPn markers.
- */
-
-GLOBAL(void)
-jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
-			   jpeg_marker_parser_method routine)
-{
-  if (marker_code == JPEG_COM)
-    cinfo->marker->process_COM = routine;
-  else if (marker_code >= JPEG_APP0 && marker_code <= JPEG_APP0+15)
-    cinfo->marker->process_APPn[marker_code-JPEG_APP0] = routine;
-  else
-    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
-}
-
-
 /*
  * Set default decompression parameters.
  */
@@ -196,8 +186,8 @@ default_decompress_parms (j_decompress_ptr cinfo)
   }
 
   /* Set defaults for other decompression parameters. */
-  cinfo->scale_num = 1;		/* 1:1 scaling */
-  cinfo->scale_denom = 1;
+  cinfo->scale_num = cinfo->block_size;		/* 1:1 scaling */
+  cinfo->scale_denom = cinfo->block_size;
   cinfo->output_gamma = 1.0;
   cinfo->buffered_image = FALSE;
   cinfo->raw_data_out = FALSE;

jdapistd.c

@@ -202,7 +202,7 @@ jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
   }
 
   /* Verify that at least one iMCU row can be returned. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size;
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size;
   if (max_lines < lines_per_iMCU_row)
     ERREXIT(cinfo, JERR_BUFFER_SIZE);
 

jdarith.c

@@ -0,0 +1,772 @@
+/*
+ * jdarith.c
+ *
+ * Developed 1997-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy decoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy decoder object for arithmetic decoding. */
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  INT32 c;       /* C register, base of coding interval + input bit buffer */
+  INT32 a;               /* A register, normalized size of coding interval */
+  int ct;     /* bit shift counter, # of bits left in bit buffer part of C */
+                                                         /* init: ct = -16 */
+                                                         /* run: ct = 0..7 */
+                                                         /* error: ct = -1 */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_decoder;
+
+typedef arith_entropy_decoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+
+LOCAL(int)
+get_byte (j_decompress_ptr cinfo)
+/* Read next input byte; we do not support suspension in this module. */
+{
+  struct jpeg_source_mgr * src = cinfo->src;
+
+  if (src->bytes_in_buffer == 0)
+    if (! (*src->fill_input_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  src->bytes_in_buffer--;
+  return GETJOCTET(*src->next_input_byte++);
+}
+
+
+/*
+ * The core arithmetic decoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Return value is 0 or 1 (binary decision).
+ *
+ * Note: I've changed the handling of the code base & bit
+ * buffer register C compared to other implementations
+ * based on the standards layout & procedures.
+ * While it also contains both the actual base of the
+ * coding interval (16 bits) and the next-bits buffer,
+ * the cut-point between these two parts is floating
+ * (instead of fixed) with the bit shift counter CT.
+ * Thus, we also need only one (variable instead of
+ * fixed size) shift for the LPS/MPS decision, and
+ * we can get away with any renormalization update
+ * of C (except for new data insertion, of course).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(int)
+arith_decode (j_decompress_ptr cinfo, unsigned char *st)
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv, data;
+
+  /* Renormalization & data input per section D.2.6 */
+  while (e->a < 0x8000L) {
+    if (--e->ct < 0) {
+      /* Need to fetch next data byte */
+      if (cinfo->unread_marker)
+	data = 0;		/* stuff zero data */
+      else {
+	data = get_byte(cinfo);	/* read next input byte */
+	if (data == 0xFF) {	/* zero stuff or marker code */
+	  do data = get_byte(cinfo);
+	  while (data == 0xFF);	/* swallow extra 0xFF bytes */
+	  if (data == 0)
+	    data = 0xFF;	/* discard stuffed zero byte */
+	  else {
+	    /* Note: Different from the Huffman decoder, hitting
+	     * a marker while processing the compressed data
+	     * segment is legal in arithmetic coding.
+	     * The convention is to supply zero data
+	     * then until decoding is complete.
+	     */
+	    cinfo->unread_marker = data;
+	    data = 0;
+	  }
+	}
+      }
+      e->c = (e->c << 8) | data; /* insert data into C register */
+      if ((e->ct += 8) < 0)	 /* update bit shift counter */
+	/* Need more initial bytes */
+	if (++e->ct == 0)
+	  /* Got 2 initial bytes -> re-init A and exit loop */
+	  e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */
+    }
+    e->a <<= 1;
+  }
+
+  /* Fetch values from our compact representation of Table D.2:
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Decode & estimation procedures per sections D.2.4 & D.2.5 */
+  temp = e->a - qe;
+  e->a = temp;
+  temp <<= e->ct;
+  if (e->c >= temp) {
+    e->c -= temp;
+    /* Conditional LPS (less probable symbol) exchange */
+    if (e->a < qe) {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    } else {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    }
+  } else if (e->a < 0x8000L) {
+    /* Conditional MPS (more probable symbol) exchange */
+    if (e->a < qe) {
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    } else {
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    }
+  }
+
+  return sv >> 7;
+}
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ */
+
+LOCAL(void)
+process_restart (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  /* Advance past the RSTn marker */
+  if (! (*cinfo->marker->read_restart_marker) (cinfo))
+    ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if ((! cinfo->progressive_mode && cinfo->lim_Se) ||
+	(cinfo->progressive_mode && cinfo->Ss)) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Arithmetic MCU decoding.
+ * Each of these routines decodes and returns one MCU's worth of
+ * arithmetic-compressed coefficients.
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
+ */
+
+/*
+ * MCU decoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign;
+  int v, m;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */
+    (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, sign, k;
+  int v, m;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+  /* Figure F.20: Decode_AC_coefficients */
+  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (arith_decode(cinfo, st)) break;		/* EOB flag */
+    while (arith_decode(cinfo, st + 1) == 0) {
+      st += 3; k++;
+      if (k > cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+    /* Figure F.21: Decoding nonzero value v */
+    /* Figure F.22: Decoding the sign of v */
+    sign = arith_decode(cinfo, entropy->fixed_bin);
+    st += 2;
+    /* Figure F.23: Decoding the magnitude category of v */
+    if ((m = arith_decode(cinfo, st)) != 0) {
+      if (arith_decode(cinfo, st)) {
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+    }
+    v = m;
+    /* Figure F.24: Decoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      if (arith_decode(cinfo, st)) v |= m;
+    v += 1; if (sign) v = -v;
+    /* Scale and output coefficient in natural (dezigzagged) order */
+    (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for DC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int p1, blkn;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* Encoded data is simply the next bit of the two's-complement DC value */
+    if (arith_decode(cinfo, st))
+      MCU_data[blkn][0][0] |= p1;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  JCOEFPTR thiscoef;
+  unsigned char *st;
+  int tbl, k, kex;
+  int p1, m1;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+  m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  for (kex = cinfo->Se; kex > 0; kex--)
+    if ((*block)[natural_order[kex]]) break;
+
+  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (k > kex)
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+    for (;;) {
+      thiscoef = *block + natural_order[k];
+      if (*thiscoef) {				/* previously nonzero coef */
+	if (arith_decode(cinfo, st + 2)) {
+	  if (*thiscoef < 0)
+	    *thiscoef += m1;
+	  else
+	    *thiscoef += p1;
+	}
+	break;
+      }
+      if (arith_decode(cinfo, st + 1)) {	/* newly nonzero coef */
+	if (arith_decode(cinfo, entropy->fixed_bin))
+	  *thiscoef = m1;
+	else
+	  *thiscoef = p1;
+	break;
+      }
+      st += 3; k++;
+      if (k > cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Decode one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  jpeg_component_info * compptr;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign, k;
+  int v, m;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    (*block)[0] = (JCOEF) entropy->last_dc_val[ci];
+
+    /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+    tbl = compptr->ac_tbl_no;
+
+    /* Figure F.20: Decode_AC_coefficients */
+    for (k = 1; k <= cinfo->lim_Se; k++) {
+      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+      while (arith_decode(cinfo, st + 1) == 0) {
+	st += 3; k++;
+	if (k > cinfo->lim_Se) {
+	  WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	  entropy->ct = -1;			/* spectral overflow */
+	  return TRUE;
+	}
+      }
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, entropy->fixed_bin);
+      st += 2;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	if (arith_decode(cinfo, st)) {
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (arith_decode(cinfo, st)) {
+	    if ((m <<= 1) == 0x8000) {
+	      WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	      entropy->ct = -1;			/* magnitude overflow */
+	      return TRUE;
+	    }
+	    st += 1;
+	  }
+	}
+      }
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      (*block)[natural_order[k]] = (JCOEF) v;
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (cinfo->progressive_mode) {
+    /* Validate progressive scan parameters */
+    if (cinfo->Ss == 0) {
+      if (cinfo->Se != 0)
+	goto bad;
+    } else {
+      /* need not check Ss/Se < 0 since they came from unsigned bytes */
+      if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se)
+	goto bad;
+      /* AC scans may have only one component */
+      if (cinfo->comps_in_scan != 1)
+	goto bad;
+    }
+    if (cinfo->Ah != 0) {
+      /* Successive approximation refinement scan: must have Al = Ah-1. */
+      if (cinfo->Ah-1 != cinfo->Al)
+	goto bad;
+    }
+    if (cinfo->Al > 13) {	/* need not check for < 0 */
+      bad:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+    }
+    /* Update progression status, and verify that scan order is legal.
+     * Note that inter-scan inconsistencies are treated as warnings
+     * not fatal errors ... not clear if this is right way to behave.
+     */
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      int coefi, cindex = cinfo->cur_comp_info[ci]->component_index;
+      int *coef_bit_ptr = & cinfo->coef_bits[cindex][0];
+      if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
+	WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
+      for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
+	int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
+	if (cinfo->Ah != expected)
+	  WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
+	coef_bit_ptr[coefi] = cinfo->Al;
+      }
+    }
+    /* Select MCU decoding routine */
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_first;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_refine;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_refine;
+    }
+  } else {
+    /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+     * This ought to be an error condition, but we make it a warning.
+     */
+    if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 ||
+	(cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se))
+      WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+    /* Select MCU decoding routine */
+    entropy->pub.decode_mcu = decode_mcu;
+  }
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if ((! cinfo->progressive_mode && cinfo->lim_Se) ||
+	(cinfo->progressive_mode && cinfo->Ss)) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+    }
+  }
+
+  /* Initialize arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_arith_decoder (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_decoder));
+  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  entropy->pub.start_pass = start_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+
+  if (cinfo->progressive_mode) {
+    /* Create progression status table */
+    int *coef_bit_ptr, ci;
+    cinfo->coef_bits = (int (*)[DCTSIZE2])
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  cinfo->num_components*DCTSIZE2*SIZEOF(int));
+    coef_bit_ptr = & cinfo->coef_bits[0][0];
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      for (i = 0; i < DCTSIZE2; i++)
+	*coef_bit_ptr++ = -1;
+  }
+}

jdatadst.c

@@ -2,13 +2,14 @@
  * jdatadst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains compression data destination routines for the case of
- * emitting JPEG data to a file (or any stdio stream).  While these routines
- * are sufficient for most applications, some will want to use a different
- * destination manager.
+ * emitting JPEG data to memory or to a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different destination manager.
  * IMPORTANT: we assume that fwrite() will correctly transcribe an array of
  * JOCTETs into 8-bit-wide elements on external storage.  If char is wider
  * than 8 bits on your machine, you may need to do some tweaking.
@@ -19,6 +20,11 @@
 #include "jpeglib.h"
 #include "jerror.h"
 
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
 
 /* Expanded data destination object for stdio output */
 
@@ -34,6 +40,21 @@ typedef my_destination_mgr * my_dest_ptr;
 #define OUTPUT_BUF_SIZE  4096	/* choose an efficiently fwrite'able size */
 
 
+/* Expanded data destination object for memory output */
+
+typedef struct {
+  struct jpeg_destination_mgr pub; /* public fields */
+
+  unsigned char ** outbuffer;	/* target buffer */
+  unsigned long * outsize;
+  unsigned char * newbuffer;	/* newly allocated buffer */
+  JOCTET * buffer;		/* start of buffer */
+  size_t bufsize;
+} my_mem_destination_mgr;
+
+typedef my_mem_destination_mgr * my_mem_dest_ptr;
+
+
 /*
  * Initialize destination --- called by jpeg_start_compress
  * before any data is actually written.
@@ -53,6 +74,12 @@ init_destination (j_compress_ptr cinfo)
   dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
 }
 
+METHODDEF(void)
+init_mem_destination (j_compress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
 
 /*
  * Empty the output buffer --- called whenever buffer fills up.
@@ -92,6 +119,36 @@ empty_output_buffer (j_compress_ptr cinfo)
   return TRUE;
 }
 
+METHODDEF(boolean)
+empty_mem_output_buffer (j_compress_ptr cinfo)
+{
+  size_t nextsize;
+  JOCTET * nextbuffer;
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  /* Try to allocate new buffer with double size */
+  nextsize = dest->bufsize * 2;
+  nextbuffer = malloc(nextsize);
+
+  if (nextbuffer == NULL)
+    ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+
+  MEMCOPY(nextbuffer, dest->buffer, dest->bufsize);
+
+  if (dest->newbuffer != NULL)
+    free(dest->newbuffer);
+
+  dest->newbuffer = nextbuffer;
+
+  dest->pub.next_output_byte = nextbuffer + dest->bufsize;
+  dest->pub.free_in_buffer = dest->bufsize;
+
+  dest->buffer = nextbuffer;
+  dest->bufsize = nextsize;
+
+  return TRUE;
+}
+
 
 /*
  * Terminate destination --- called by jpeg_finish_compress
@@ -119,6 +176,15 @@ term_destination (j_compress_ptr cinfo)
     ERREXIT(cinfo, JERR_FILE_WRITE);
 }
 
+METHODDEF(void)
+term_mem_destination (j_compress_ptr cinfo)
+{
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  *dest->outbuffer = dest->buffer;
+  *dest->outsize = dest->bufsize - dest->pub.free_in_buffer;
+}
+
 
 /*
  * Prepare for output to a stdio stream.
@@ -149,3 +215,53 @@ jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile)
   dest->pub.term_destination = term_destination;
   dest->outfile = outfile;
 }
+
+
+/*
+ * Prepare for output to a memory buffer.
+ * The caller may supply an own initial buffer with appropriate size.
+ * Otherwise, or when the actual data output exceeds the given size,
+ * the library adapts the buffer size as necessary.
+ * The standard library functions malloc/free are used for allocating
+ * larger memory, so the buffer is available to the application after
+ * finishing compression, and then the application is responsible for
+ * freeing the requested memory.
+ */
+
+GLOBAL(void)
+jpeg_mem_dest (j_compress_ptr cinfo,
+	       unsigned char ** outbuffer, unsigned long * outsize)
+{
+  my_mem_dest_ptr dest;
+
+  if (outbuffer == NULL || outsize == NULL)	/* sanity check */
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* The destination object is made permanent so that multiple JPEG images
+   * can be written to the same buffer without re-executing jpeg_mem_dest.
+   */
+  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
+    cinfo->dest = (struct jpeg_destination_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_mem_destination_mgr));
+  }
+
+  dest = (my_mem_dest_ptr) cinfo->dest;
+  dest->pub.init_destination = init_mem_destination;
+  dest->pub.empty_output_buffer = empty_mem_output_buffer;
+  dest->pub.term_destination = term_mem_destination;
+  dest->outbuffer = outbuffer;
+  dest->outsize = outsize;
+  dest->newbuffer = NULL;
+
+  if (*outbuffer == NULL || *outsize == 0) {
+    /* Allocate initial buffer */
+    dest->newbuffer = *outbuffer = malloc(OUTPUT_BUF_SIZE);
+    if (dest->newbuffer == NULL)
+      ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+    *outsize = OUTPUT_BUF_SIZE;
+  }
+
+  dest->pub.next_output_byte = dest->buffer = *outbuffer;
+  dest->pub.free_in_buffer = dest->bufsize = *outsize;
+}

jdatasrc.c

@@ -2,13 +2,14 @@
  * jdatasrc.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains decompression data source routines for the case of
- * reading JPEG data from a file (or any stdio stream).  While these routines
- * are sufficient for most applications, some will want to use a different
- * source manager.
+ * reading JPEG data from memory or from a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different source manager.
  * IMPORTANT: we assume that fread() will correctly transcribe an array of
  * JOCTETs from 8-bit-wide elements on external storage.  If char is wider
  * than 8 bits on your machine, you may need to do some tweaking.
@@ -52,6 +53,12 @@ init_source (j_decompress_ptr cinfo)
   src->start_of_file = TRUE;
 }
 
+METHODDEF(void)
+init_mem_source (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
 
 /*
  * Fill the input buffer --- called whenever buffer is emptied.
@@ -111,6 +118,26 @@ fill_input_buffer (j_decompress_ptr cinfo)
   return TRUE;
 }
 
+METHODDEF(boolean)
+fill_mem_input_buffer (j_decompress_ptr cinfo)
+{
+  static JOCTET mybuffer[4];
+
+  /* The whole JPEG data is expected to reside in the supplied memory
+   * buffer, so any request for more data beyond the given buffer size
+   * is treated as an error.
+   */
+  WARNMS(cinfo, JWRN_JPEG_EOF);
+  /* Insert a fake EOI marker */
+  mybuffer[0] = (JOCTET) 0xFF;
+  mybuffer[1] = (JOCTET) JPEG_EOI;
+
+  cinfo->src->next_input_byte = mybuffer;
+  cinfo->src->bytes_in_buffer = 2;
+
+  return TRUE;
+}
+
 
 /*
  * Skip data --- used to skip over a potentially large amount of
@@ -127,22 +154,22 @@ fill_input_buffer (j_decompress_ptr cinfo)
 METHODDEF(void)
 skip_input_data (j_decompress_ptr cinfo, long num_bytes)
 {
-  my_src_ptr src = (my_src_ptr) cinfo->src;
+  struct jpeg_source_mgr * src = cinfo->src;
 
   /* Just a dumb implementation for now.  Could use fseek() except
    * it doesn't work on pipes.  Not clear that being smart is worth
    * any trouble anyway --- large skips are infrequent.
    */
   if (num_bytes > 0) {
-    while (num_bytes > (long) src->pub.bytes_in_buffer) {
-      num_bytes -= (long) src->pub.bytes_in_buffer;
+    while (num_bytes > (long) src->bytes_in_buffer) {
+      num_bytes -= (long) src->bytes_in_buffer;
       (void) fill_input_buffer(cinfo);
       /* note we assume that fill_input_buffer will never return FALSE,
        * so suspension need not be handled.
        */
     }
-    src->pub.next_input_byte += (size_t) num_bytes;
-    src->pub.bytes_in_buffer -= (size_t) num_bytes;
+    src->next_input_byte += (size_t) num_bytes;
+    src->bytes_in_buffer -= (size_t) num_bytes;
   }
 }
 
@@ -210,3 +237,38 @@ jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile)
   src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */
   src->pub.next_input_byte = NULL; /* until buffer loaded */
 }
+
+
+/*
+ * Prepare for input from a supplied memory buffer.
+ * The buffer must contain the whole JPEG data.
+ */
+
+GLOBAL(void)
+jpeg_mem_src (j_decompress_ptr cinfo,
+	      unsigned char * inbuffer, unsigned long insize)
+{
+  struct jpeg_source_mgr * src;
+
+  if (inbuffer == NULL || insize == 0)	/* Treat empty input as fatal error */
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+
+  /* The source object is made permanent so that a series of JPEG images
+   * can be read from the same buffer by calling jpeg_mem_src only before
+   * the first one.
+   */
+  if (cinfo->src == NULL) {	/* first time for this JPEG object? */
+    cinfo->src = (struct jpeg_source_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(struct jpeg_source_mgr));
+  }
+
+  src = cinfo->src;
+  src->init_source = init_mem_source;
+  src->fill_input_buffer = fill_mem_input_buffer;
+  src->skip_input_data = skip_input_data;
+  src->resync_to_restart = jpeg_resync_to_restart; /* use default method */
+  src->term_source = term_source;
+  src->bytes_in_buffer = (size_t) insize;
+  src->next_input_byte = (JOCTET *) inbuffer;
+}

jdcoefct.c

@@ -1,7 +1,7 @@
 /*
  * jdcoefct.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -139,8 +139,8 @@ start_output_pass (j_decompress_ptr cinfo)
  * Input and output must run in lockstep since we have only a one-MCU buffer.
  * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
  *
- * NB: output_buf contains a plane for each component in image.
- * For single pass, this is the same as the components in the scan.
+ * NB: output_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
  */
 
 METHODDEF(int)
@@ -186,7 +186,8 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
 	useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
 						    : compptr->last_col_width;
-	output_ptr = output_buf[ci] + yoffset * compptr->DCT_scaled_size;
+	output_ptr = output_buf[compptr->component_index] +
+	  yoffset * compptr->DCT_v_scaled_size;
 	start_col = MCU_col_num * compptr->MCU_sample_width;
 	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
 	  if (cinfo->input_iMCU_row < last_iMCU_row ||
@@ -196,11 +197,11 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	      (*inverse_DCT) (cinfo, compptr,
 			      (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
 			      output_ptr, output_col);
-	      output_col += compptr->DCT_scaled_size;
+	      output_col += compptr->DCT_h_scaled_size;
 	    }
 	  }
 	  blkn += compptr->MCU_width;
-	  output_ptr += compptr->DCT_scaled_size;
+	  output_ptr += compptr->DCT_v_scaled_size;
 	}
       }
     }
@@ -361,9 +362,9 @@ decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
 			output_ptr, output_col);
 	buffer_ptr++;
-	output_col += compptr->DCT_scaled_size;
+	output_col += compptr->DCT_h_scaled_size;
       }
-      output_ptr += compptr->DCT_scaled_size;
+      output_ptr += compptr->DCT_v_scaled_size;
     }
   }
 
@@ -653,9 +654,9 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	DC4 = DC5; DC5 = DC6;
 	DC7 = DC8; DC8 = DC9;
 	buffer_ptr++, prev_block_row++, next_block_row++;
-	output_col += compptr->DCT_scaled_size;
+	output_col += compptr->DCT_h_scaled_size;
       }
-      output_ptr += compptr->DCT_scaled_size;
+      output_ptr += compptr->DCT_v_scaled_size;
     }
   }
 

jdcolor.c

@@ -1,7 +1,7 @@
 /*
  * jdcolor.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -207,6 +207,33 @@ grayscale_convert (j_decompress_ptr cinfo,
 }
 
 
+/*
+ * Convert grayscale to RGB: just duplicate the graylevel three times.
+ * This is provided to support applications that don't want to cope
+ * with grayscale as a separate case.
+ */
+
+METHODDEF(void)
+gray_rgb_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr = input_buf[0][input_row++];
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
 /*
  * Adobe-style YCCK->CMYK conversion.
  * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
@@ -333,6 +360,8 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
     if (cinfo->jpeg_color_space == JCS_YCbCr) {
       cconvert->pub.color_convert = ycc_rgb_convert;
       build_ycc_rgb_table(cinfo);
+    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
+      cconvert->pub.color_convert = gray_rgb_convert;
     } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
       cconvert->pub.color_convert = null_convert;
     } else

jdct.h

@@ -14,11 +14,16 @@
 
 
 /*
- * A forward DCT routine is given a pointer to a work area of type DCTELEM[];
- * the DCT is to be performed in-place in that buffer.  Type DCTELEM is int
- * for 8-bit samples, INT32 for 12-bit samples.  (NOTE: Floating-point DCT
- * implementations use an array of type FAST_FLOAT, instead.)
- * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE).
+ * A forward DCT routine is given a pointer to an input sample array and
+ * a pointer to a work area of type DCTELEM[]; the DCT is to be performed
+ * in-place in that buffer.  Type DCTELEM is int for 8-bit samples, INT32
+ * for 12-bit samples.  (NOTE: Floating-point DCT implementations use an
+ * array of type FAST_FLOAT, instead.)
+ * The input data is to be fetched from the sample array starting at a
+ * specified column.  (Any row offset needed will be applied to the array
+ * pointer before it is passed to the FDCT code.)
+ * Note that the number of samples fetched by the FDCT routine is
+ * DCT_h_scaled_size * DCT_v_scaled_size.
  * The DCT outputs are returned scaled up by a factor of 8; they therefore
  * have a range of +-8K for 8-bit data, +-128K for 12-bit data.  This
  * convention improves accuracy in integer implementations and saves some
@@ -32,8 +37,12 @@ typedef int DCTELEM;		/* 16 or 32 bits is fine */
 typedef INT32 DCTELEM;		/* must have 32 bits */
 #endif
 
-typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data));
-typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data));
+typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data,
+					       JSAMPARRAY sample_data,
+					       JDIMENSION start_col));
+typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data,
+					     JSAMPARRAY sample_data,
+					     JDIMENSION start_col));
 
 
 /*
@@ -44,7 +53,7 @@ typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data));
  * sample array starting at a specified column.  (Any row offset needed will
  * be applied to the array pointer before it is passed to the IDCT code.)
  * Note that the number of samples emitted by the IDCT routine is
- * DCT_scaled_size * DCT_scaled_size.
+ * DCT_h_scaled_size * DCT_v_scaled_size.
  */
 
 /* typedef inverse_DCT_method_ptr is declared in jpegint.h */
@@ -84,19 +93,143 @@ typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
 #define jpeg_fdct_islow		jFDislow
 #define jpeg_fdct_ifast		jFDifast
 #define jpeg_fdct_float		jFDfloat
+#define jpeg_fdct_7x7		jFD7x7
+#define jpeg_fdct_6x6		jFD6x6
+#define jpeg_fdct_5x5		jFD5x5
+#define jpeg_fdct_4x4		jFD4x4
+#define jpeg_fdct_3x3		jFD3x3
+#define jpeg_fdct_2x2		jFD2x2
+#define jpeg_fdct_1x1		jFD1x1
+#define jpeg_fdct_9x9		jFD9x9
+#define jpeg_fdct_10x10		jFD10x10
+#define jpeg_fdct_11x11		jFD11x11
+#define jpeg_fdct_12x12		jFD12x12
+#define jpeg_fdct_13x13		jFD13x13
+#define jpeg_fdct_14x14		jFD14x14
+#define jpeg_fdct_15x15		jFD15x15
+#define jpeg_fdct_16x16		jFD16x16
+#define jpeg_fdct_16x8		jFD16x8
+#define jpeg_fdct_14x7		jFD14x7
+#define jpeg_fdct_12x6		jFD12x6
+#define jpeg_fdct_10x5		jFD10x5
+#define jpeg_fdct_8x4		jFD8x4
+#define jpeg_fdct_6x3		jFD6x3
+#define jpeg_fdct_4x2		jFD4x2
+#define jpeg_fdct_2x1		jFD2x1
+#define jpeg_fdct_8x16		jFD8x16
+#define jpeg_fdct_7x14		jFD7x14
+#define jpeg_fdct_6x12		jFD6x12
+#define jpeg_fdct_5x10		jFD5x10
+#define jpeg_fdct_4x8		jFD4x8
+#define jpeg_fdct_3x6		jFD3x6
+#define jpeg_fdct_2x4		jFD2x4
+#define jpeg_fdct_1x2		jFD1x2
 #define jpeg_idct_islow		jRDislow
 #define jpeg_idct_ifast		jRDifast
 #define jpeg_idct_float		jRDfloat
+#define jpeg_idct_7x7		jRD7x7
+#define jpeg_idct_6x6		jRD6x6
+#define jpeg_idct_5x5		jRD5x5
 #define jpeg_idct_4x4		jRD4x4
+#define jpeg_idct_3x3		jRD3x3
 #define jpeg_idct_2x2		jRD2x2
 #define jpeg_idct_1x1		jRD1x1
+#define jpeg_idct_9x9		jRD9x9
+#define jpeg_idct_10x10		jRD10x10
+#define jpeg_idct_11x11		jRD11x11
+#define jpeg_idct_12x12		jRD12x12
+#define jpeg_idct_13x13		jRD13x13
+#define jpeg_idct_14x14		jRD14x14
+#define jpeg_idct_15x15		jRD15x15
+#define jpeg_idct_16x16		jRD16x16
+#define jpeg_idct_16x8		jRD16x8
+#define jpeg_idct_14x7		jRD14x7
+#define jpeg_idct_12x6		jRD12x6
+#define jpeg_idct_10x5		jRD10x5
+#define jpeg_idct_8x4		jRD8x4
+#define jpeg_idct_6x3		jRD6x3
+#define jpeg_idct_4x2		jRD4x2
+#define jpeg_idct_2x1		jRD2x1
+#define jpeg_idct_8x16		jRD8x16
+#define jpeg_idct_7x14		jRD7x14
+#define jpeg_idct_6x12		jRD6x12
+#define jpeg_idct_5x10		jRD5x10
+#define jpeg_idct_4x8		jRD4x8
+#define jpeg_idct_3x6		jRD3x8
+#define jpeg_idct_2x4		jRD2x4
+#define jpeg_idct_1x2		jRD1x2
 #endif /* NEED_SHORT_EXTERNAL_NAMES */
 
 /* Extern declarations for the forward and inverse DCT routines. */
 
-EXTERN(void) jpeg_fdct_islow JPP((DCTELEM * data));
-EXTERN(void) jpeg_fdct_ifast JPP((DCTELEM * data));
-EXTERN(void) jpeg_fdct_float JPP((FAST_FLOAT * data));
+EXTERN(void) jpeg_fdct_islow
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_ifast
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_float
+    JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_7x7
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_5x5
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_3x3
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_1x1
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_9x9
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_10x10
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_11x11
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_12x12
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_13x13
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_14x14
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_15x15
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_16x16
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_16x8
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_14x7
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_12x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_10x5
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_8x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x3
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x1
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_8x16
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_7x14
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x12
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_5x10
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x8
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_3x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_1x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
 
 EXTERN(void) jpeg_idct_islow
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
@@ -107,15 +240,99 @@ EXTERN(void) jpeg_idct_ifast
 EXTERN(void) jpeg_idct_float
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_7x7
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_5x5
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 EXTERN(void) jpeg_idct_4x4
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_3x3
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 EXTERN(void) jpeg_idct_2x2
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 EXTERN(void) jpeg_idct_1x1
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_9x9
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_10x10
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_11x11
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_12x12
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_13x13
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_14x14
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_15x15
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_16x16
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_16x8
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_14x7
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_12x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_10x5
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_8x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x3
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x1
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_8x16
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_7x14
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x12
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_5x10
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x8
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_3x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_1x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 
 
 /*

jddctmgr.c

@@ -2,6 +2,7 @@
  * jddctmgr.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2010 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -98,22 +99,134 @@ start_pass (j_decompress_ptr cinfo)
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     /* Select the proper IDCT routine for this component's scaling */
-    switch (compptr->DCT_scaled_size) {
+    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
 #ifdef IDCT_SCALING_SUPPORTED
-    case 1:
+    case ((1 << 8) + 1):
       method_ptr = jpeg_idct_1x1;
-      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
       break;
-    case 2:
+    case ((2 << 8) + 2):
       method_ptr = jpeg_idct_2x2;
-      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
       break;
-    case 4:
+    case ((3 << 8) + 3):
+      method_ptr = jpeg_idct_3x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 4):
       method_ptr = jpeg_idct_4x4;
-      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 5):
+      method_ptr = jpeg_idct_5x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 6):
+      method_ptr = jpeg_idct_6x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 7):
+      method_ptr = jpeg_idct_7x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((9 << 8) + 9):
+      method_ptr = jpeg_idct_9x9;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 10):
+      method_ptr = jpeg_idct_10x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((11 << 8) + 11):
+      method_ptr = jpeg_idct_11x11;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 12):
+      method_ptr = jpeg_idct_12x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((13 << 8) + 13):
+      method_ptr = jpeg_idct_13x13;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 14):
+      method_ptr = jpeg_idct_14x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((15 << 8) + 15):
+      method_ptr = jpeg_idct_15x15;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 16):
+      method_ptr = jpeg_idct_16x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 8):
+      method_ptr = jpeg_idct_16x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 7):
+      method_ptr = jpeg_idct_14x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 6):
+      method_ptr = jpeg_idct_12x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 5):
+      method_ptr = jpeg_idct_10x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 4):
+      method_ptr = jpeg_idct_8x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 3):
+      method_ptr = jpeg_idct_6x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 2):
+      method_ptr = jpeg_idct_4x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 1):
+      method_ptr = jpeg_idct_2x1;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 16):
+      method_ptr = jpeg_idct_8x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 14):
+      method_ptr = jpeg_idct_7x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 12):
+      method_ptr = jpeg_idct_6x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 10):
+      method_ptr = jpeg_idct_5x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 8):
+      method_ptr = jpeg_idct_4x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((3 << 8) + 6):
+      method_ptr = jpeg_idct_3x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 4):
+      method_ptr = jpeg_idct_2x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((1 << 8) + 2):
+      method_ptr = jpeg_idct_1x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
       break;
 #endif
-    case DCTSIZE:
+    case ((DCTSIZE << 8) + DCTSIZE):
       switch (cinfo->dct_method) {
 #ifdef DCT_ISLOW_SUPPORTED
       case JDCT_ISLOW:
@@ -139,7 +252,8 @@ start_pass (j_decompress_ptr cinfo)
       }
       break;
     default:
-      ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size);
+      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
       break;
     }
     idct->pub.inverse_DCT[ci] = method_ptr;
@@ -211,6 +325,7 @@ start_pass (j_decompress_ptr cinfo)
 	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
 	 *   scalefactor[0] = 1
 	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 1/8.
 	 */
 	FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
 	int row, col;
@@ -224,7 +339,7 @@ start_pass (j_decompress_ptr cinfo)
 	  for (col = 0; col < DCTSIZE; col++) {
 	    fmtbl[i] = (FLOAT_MULT_TYPE)
 	      ((double) qtbl->quantval[i] *
-	       aanscalefactor[row] * aanscalefactor[col]);
+	       aanscalefactor[row] * aanscalefactor[col] * 0.125);
 	    i++;
 	  }
 	}

jdhuff.h

@@ -1,202 +0,0 @@
-/*
- * jdhuff.h
- *
- * Copyright (C) 1991-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy decoding routines
- * that are shared between the sequential decoder (jdhuff.c) and the
- * progressive decoder (jdphuff.c).  No other modules need to see these.
- */
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_d_derived_tbl	jMkDDerived
-#define jpeg_fill_bit_buffer	jFilBitBuf
-#define jpeg_huff_decode	jHufDecode
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* Derived data constructed for each Huffman table */
-
-#define HUFF_LOOKAHEAD	8	/* # of bits of lookahead */
-
-typedef struct {
-  /* Basic tables: (element [0] of each array is unused) */
-  INT32 mincode[17];		/* smallest code of length k */
-  INT32 maxcode[18];		/* largest code of length k (-1 if none) */
-  /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
-  int valptr[17];		/* huffval[] index of 1st symbol of length k */
-
-  /* Link to public Huffman table (needed only in jpeg_huff_decode) */
-  JHUFF_TBL *pub;
-
-  /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of
-   * the input data stream.  If the next Huffman code is no more
-   * than HUFF_LOOKAHEAD bits long, we can obtain its length and
-   * the corresponding symbol directly from these tables.
-   */
-  int look_nbits[1<<HUFF_LOOKAHEAD]; /* # bits, or 0 if too long */
-  UINT8 look_sym[1<<HUFF_LOOKAHEAD]; /* symbol, or unused */
-} d_derived_tbl;
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_d_derived_tbl JPP((j_decompress_ptr cinfo,
-				JHUFF_TBL * htbl, d_derived_tbl ** pdtbl));
-
-
-/*
- * Fetching the next N bits from the input stream is a time-critical operation
- * for the Huffman decoders.  We implement it with a combination of inline
- * macros and out-of-line subroutines.  Note that N (the number of bits
- * demanded at one time) never exceeds 15 for JPEG use.
- *
- * We read source bytes into get_buffer and dole out bits as needed.
- * If get_buffer already contains enough bits, they are fetched in-line
- * by the macros CHECK_BIT_BUFFER and GET_BITS.  When there aren't enough
- * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer
- * as full as possible (not just to the number of bits needed; this
- * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer).
- * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension.
- * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains
- * at least the requested number of bits --- dummy zeroes are inserted if
- * necessary.
- */
-
-typedef INT32 bit_buf_type;	/* type of bit-extraction buffer */
-#define BIT_BUF_SIZE  32	/* size of buffer in bits */
-
-/* If long is > 32 bits on your machine, and shifting/masking longs is
- * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
- * appropriately should be a win.  Unfortunately we can't do this with
- * something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
- * because not all machines measure sizeof in 8-bit bytes.
- */
-
-typedef struct {		/* Bitreading state saved across MCUs */
-  bit_buf_type get_buffer;	/* current bit-extraction buffer */
-  int bits_left;		/* # of unused bits in it */
-  boolean printed_eod;		/* flag to suppress multiple warning msgs */
-} bitread_perm_state;
-
-typedef struct {		/* Bitreading working state within an MCU */
-  /* current data source state */
-  const JOCTET * next_input_byte; /* => next byte to read from source */
-  size_t bytes_in_buffer;	/* # of bytes remaining in source buffer */
-  int unread_marker;		/* nonzero if we have hit a marker */
-  /* bit input buffer --- note these values are kept in register variables,
-   * not in this struct, inside the inner loops.
-   */
-  bit_buf_type get_buffer;	/* current bit-extraction buffer */
-  int bits_left;		/* # of unused bits in it */
-  /* pointers needed by jpeg_fill_bit_buffer */
-  j_decompress_ptr cinfo;	/* back link to decompress master record */
-  boolean * printed_eod_ptr;	/* => flag in permanent state */
-} bitread_working_state;
-
-/* Macros to declare and load/save bitread local variables. */
-#define BITREAD_STATE_VARS  \
-	register bit_buf_type get_buffer;  \
-	register int bits_left;  \
-	bitread_working_state br_state
-
-#define BITREAD_LOAD_STATE(cinfop,permstate)  \
-	br_state.cinfo = cinfop; \
-	br_state.next_input_byte = cinfop->src->next_input_byte; \
-	br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
-	br_state.unread_marker = cinfop->unread_marker; \
-	get_buffer = permstate.get_buffer; \
-	bits_left = permstate.bits_left; \
-	br_state.printed_eod_ptr = & permstate.printed_eod
-
-#define BITREAD_SAVE_STATE(cinfop,permstate)  \
-	cinfop->src->next_input_byte = br_state.next_input_byte; \
-	cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
-	cinfop->unread_marker = br_state.unread_marker; \
-	permstate.get_buffer = get_buffer; \
-	permstate.bits_left = bits_left
-
-/*
- * These macros provide the in-line portion of bit fetching.
- * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer
- * before using GET_BITS, PEEK_BITS, or DROP_BITS.
- * The variables get_buffer and bits_left are assumed to be locals,
- * but the state struct might not be (jpeg_huff_decode needs this).
- *	CHECK_BIT_BUFFER(state,n,action);
- *		Ensure there are N bits in get_buffer; if suspend, take action.
- *      val = GET_BITS(n);
- *		Fetch next N bits.
- *      val = PEEK_BITS(n);
- *		Fetch next N bits without removing them from the buffer.
- *	DROP_BITS(n);
- *		Discard next N bits.
- * The value N should be a simple variable, not an expression, because it
- * is evaluated multiple times.
- */
-
-#define CHECK_BIT_BUFFER(state,nbits,action) \
-	{ if (bits_left < (nbits)) {  \
-	    if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits))  \
-	      { action; }  \
-	    get_buffer = (state).get_buffer; bits_left = (state).bits_left; } }
-
-#define GET_BITS(nbits) \
-	(((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1))
-
-#define PEEK_BITS(nbits) \
-	(((int) (get_buffer >> (bits_left -  (nbits)))) & ((1<<(nbits))-1))
-
-#define DROP_BITS(nbits) \
-	(bits_left -= (nbits))
-
-/* Load up the bit buffer to a depth of at least nbits */
-EXTERN(boolean) jpeg_fill_bit_buffer
-	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
-	     register int bits_left, int nbits));
-
-
-/*
- * Code for extracting next Huffman-coded symbol from input bit stream.
- * Again, this is time-critical and we make the main paths be macros.
- *
- * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits
- * without looping.  Usually, more than 95% of the Huffman codes will be 8
- * or fewer bits long.  The few overlength codes are handled with a loop,
- * which need not be inline code.
- *
- * Notes about the HUFF_DECODE macro:
- * 1. Near the end of the data segment, we may fail to get enough bits
- *    for a lookahead.  In that case, we do it the hard way.
- * 2. If the lookahead table contains no entry, the next code must be
- *    more than HUFF_LOOKAHEAD bits long.
- * 3. jpeg_huff_decode returns -1 if forced to suspend.
- */
-
-#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \
-{ register int nb, look; \
-  if (bits_left < HUFF_LOOKAHEAD) { \
-    if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \
-    get_buffer = state.get_buffer; bits_left = state.bits_left; \
-    if (bits_left < HUFF_LOOKAHEAD) { \
-      nb = 1; goto slowlabel; \
-    } \
-  } \
-  look = PEEK_BITS(HUFF_LOOKAHEAD); \
-  if ((nb = htbl->look_nbits[look]) != 0) { \
-    DROP_BITS(nb); \
-    result = htbl->look_sym[look]; \
-  } else { \
-    nb = HUFF_LOOKAHEAD+1; \
-slowlabel: \
-    if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \
-	{ failaction; } \
-    get_buffer = state.get_buffer; bits_left = state.bits_left; \
-  } \
-}
-
-/* Out-of-line case for Huffman code fetching */
-EXTERN(int) jpeg_huff_decode
-	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
-	     register int bits_left, d_derived_tbl * htbl, int min_bits));

jdinput.c

@@ -1,14 +1,15 @@
 /*
  * jdinput.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2002-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains input control logic for the JPEG decompressor.
  * These routines are concerned with controlling the decompressor's input
  * processing (marker reading and coefficient decoding).  The actual input
- * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c.
+ * reading is done in jdmarker.c, jdhuff.c, and jdarith.c.
  */
 
 #define JPEG_INTERNALS
@@ -21,7 +22,7 @@
 typedef struct {
   struct jpeg_input_controller pub; /* public fields */
 
-  boolean inheaders;		/* TRUE until first SOS is reached */
+  int inheaders;		/* Nonzero until first SOS is reached */
 } my_input_controller;
 
 typedef my_input_controller * my_inputctl_ptr;
@@ -35,6 +36,174 @@ METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo));
  * Routines to calculate various quantities related to the size of the image.
  */
 
+
+/*
+ * Compute output image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_core_output_dimensions (j_decompress_ptr cinfo)
+/* Do computations that are needed before master selection phase.
+ * This function is used for transcoding and full decompression.
+ */
+{
+#ifdef IDCT_SCALING_SUPPORTED
+  int ci;
+  jpeg_component_info *compptr;
+
+  /* Compute actual output image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) {
+    /* Provide 1/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) {
+    /* Provide 2/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) {
+    /* Provide 3/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 3;
+    cinfo->min_DCT_v_scaled_size = 3;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) {
+    /* Provide 4/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) {
+    /* Provide 5/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 5;
+    cinfo->min_DCT_v_scaled_size = 5;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) {
+    /* Provide 6/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 6;
+    cinfo->min_DCT_v_scaled_size = 6;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) {
+    /* Provide 7/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 7;
+    cinfo->min_DCT_v_scaled_size = 7;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) {
+    /* Provide 8/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) {
+    /* Provide 9/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 9;
+    cinfo->min_DCT_v_scaled_size = 9;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) {
+    /* Provide 10/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 10;
+    cinfo->min_DCT_v_scaled_size = 10;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) {
+    /* Provide 11/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 11;
+    cinfo->min_DCT_v_scaled_size = 11;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) {
+    /* Provide 12/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 12;
+    cinfo->min_DCT_v_scaled_size = 12;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) {
+    /* Provide 13/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 13;
+    cinfo->min_DCT_v_scaled_size = 13;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) {
+    /* Provide 14/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 14;
+    cinfo->min_DCT_v_scaled_size = 14;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) {
+    /* Provide 15/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 15;
+    cinfo->min_DCT_v_scaled_size = 15;
+  } else {
+    /* Provide 16/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 16;
+    cinfo->min_DCT_v_scaled_size = 16;
+  }
+
+  /* Recompute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size;
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size;
+  }
+
+#else /* !IDCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->output_width = cinfo->image_width;
+  cinfo->output_height = cinfo->image_height;
+  /* jdinput.c has already initialized DCT_scaled_size,
+   * and has computed unscaled downsampled_width and downsampled_height.
+   */
+
+#endif /* IDCT_SCALING_SUPPORTED */
+}
+
+
 LOCAL(void)
 initial_setup (j_decompress_ptr cinfo)
 /* Called once, when first SOS marker is reached */
@@ -70,23 +239,121 @@ initial_setup (j_decompress_ptr cinfo)
 				   compptr->v_samp_factor);
   }
 
-  /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE.
-   * In the full decompressor, this will be overridden by jdmaster.c;
-   * but in the transcoder, jdmaster.c is not used, so we must do it here.
+  /* Derive block_size, natural_order, and lim_Se */
+  if (cinfo->is_baseline || (cinfo->progressive_mode &&
+      cinfo->comps_in_scan)) { /* no pseudo SOS marker */
+    cinfo->block_size = DCTSIZE;
+    cinfo->natural_order = jpeg_natural_order;
+    cinfo->lim_Se = DCTSIZE2-1;
+  } else
+    switch (cinfo->Se) {
+    case (1*1-1):
+      cinfo->block_size = 1;
+      cinfo->natural_order = jpeg_natural_order; /* not needed */
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (2*2-1):
+      cinfo->block_size = 2;
+      cinfo->natural_order = jpeg_natural_order2;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (3*3-1):
+      cinfo->block_size = 3;
+      cinfo->natural_order = jpeg_natural_order3;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (4*4-1):
+      cinfo->block_size = 4;
+      cinfo->natural_order = jpeg_natural_order4;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (5*5-1):
+      cinfo->block_size = 5;
+      cinfo->natural_order = jpeg_natural_order5;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (6*6-1):
+      cinfo->block_size = 6;
+      cinfo->natural_order = jpeg_natural_order6;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (7*7-1):
+      cinfo->block_size = 7;
+      cinfo->natural_order = jpeg_natural_order7;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (8*8-1):
+      cinfo->block_size = 8;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (9*9-1):
+      cinfo->block_size = 9;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (10*10-1):
+      cinfo->block_size = 10;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (11*11-1):
+      cinfo->block_size = 11;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (12*12-1):
+      cinfo->block_size = 12;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (13*13-1):
+      cinfo->block_size = 13;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (14*14-1):
+      cinfo->block_size = 14;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (15*15-1):
+      cinfo->block_size = 15;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (16*16-1):
+      cinfo->block_size = 16;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    default:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+      break;
+    }
+
+  /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size.
+   * In the full decompressor,
+   * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c;
+   * but in the transcoder,
+   * jpeg_calc_output_dimensions is not used, so we must do it here.
    */
-  cinfo->min_DCT_scaled_size = DCTSIZE;
+  cinfo->min_DCT_h_scaled_size = cinfo->block_size;
+  cinfo->min_DCT_v_scaled_size = cinfo->block_size;
 
   /* Compute dimensions of components */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    compptr->DCT_scaled_size = DCTSIZE;
+    compptr->DCT_h_scaled_size = cinfo->block_size;
+    compptr->DCT_v_scaled_size = cinfo->block_size;
     /* Size in DCT blocks */
     compptr->width_in_blocks = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->height_in_blocks = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     /* downsampled_width and downsampled_height will also be overridden by
      * jdmaster.c if we are doing full decompression.  The transcoder library
      * doesn't use these values, but the calling application might.
@@ -107,7 +374,7 @@ initial_setup (j_decompress_ptr cinfo)
   /* Compute number of fully interleaved MCU rows. */
   cinfo->total_iMCU_rows = (JDIMENSION)
     jdiv_round_up((long) cinfo->image_height,
-		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
+	          (long) (cinfo->max_v_samp_factor * cinfo->block_size));
 
   /* Decide whether file contains multiple scans */
   if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode)
@@ -138,7 +405,7 @@ per_scan_setup (j_decompress_ptr cinfo)
     compptr->MCU_width = 1;
     compptr->MCU_height = 1;
     compptr->MCU_blocks = 1;
-    compptr->MCU_sample_width = compptr->DCT_scaled_size;
+    compptr->MCU_sample_width = compptr->DCT_h_scaled_size;
     compptr->last_col_width = 1;
     /* For noninterleaved scans, it is convenient to define last_row_height
      * as the number of block rows present in the last iMCU row.
@@ -161,10 +428,10 @@ per_scan_setup (j_decompress_ptr cinfo)
     /* Overall image size in MCUs */
     cinfo->MCUs_per_row = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width,
-		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     cinfo->MCU_rows_in_scan = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height,
-		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     
     cinfo->blocks_in_MCU = 0;
     
@@ -174,7 +441,7 @@ per_scan_setup (j_decompress_ptr cinfo)
       compptr->MCU_width = compptr->h_samp_factor;
       compptr->MCU_height = compptr->v_samp_factor;
       compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
-      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size;
       /* Figure number of non-dummy blocks in last MCU column & row */
       tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
       if (tmp == 0) tmp = compptr->MCU_width;
@@ -282,6 +549,10 @@ finish_input_pass (j_decompress_ptr cinfo)
  * The consume_input method pointer points either here or to the
  * coefficient controller's consume_data routine, depending on whether
  * we are reading a compressed data segment or inter-segment markers.
+ *
+ * Note: This function should NOT return a pseudo SOS marker (with zero
+ * component number) to the caller.  A pseudo marker received by
+ * read_markers is processed and then skipped for other markers.
  */
 
 METHODDEF(int)
@@ -293,23 +564,31 @@ consume_markers (j_decompress_ptr cinfo)
   if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */
     return JPEG_REACHED_EOI;
 
+  for (;;) {			/* Loop to pass pseudo SOS marker */
     val = (*cinfo->marker->read_markers) (cinfo);
 
     switch (val) {
     case JPEG_REACHED_SOS:	/* Found SOS */
       if (inputctl->inheaders) { /* 1st SOS */
+	if (inputctl->inheaders == 1)
 	  initial_setup(cinfo);
-      inputctl->inheaders = FALSE;
+	if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */
+	  inputctl->inheaders = 2;
+	  break;
+	}
+	inputctl->inheaders = 0;
 	/* Note: start_input_pass must be called by jdmaster.c
-       * before any more input can be consumed.  jdapi.c is
+	 * before any more input can be consumed.  jdapimin.c is
 	 * responsible for enforcing this sequencing.
 	 */
       } else {			/* 2nd or later SOS marker */
 	if (! inputctl->pub.has_multiple_scans)
 	  ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */
+	if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */
+	  break;
 	start_input_pass(cinfo);
       }
-    break;
+      return val;
     case JPEG_REACHED_EOI:	/* Found EOI */
       inputctl->pub.eoi_reached = TRUE;
       if (inputctl->inheaders) { /* Tables-only datastream, apparently */
@@ -322,12 +601,13 @@ consume_markers (j_decompress_ptr cinfo)
 	if (cinfo->output_scan_number > cinfo->input_scan_number)
 	  cinfo->output_scan_number = cinfo->input_scan_number;
       }
-    break;
-  case JPEG_SUSPENDED:
-    break;
-  }
-
       return val;
+    case JPEG_SUSPENDED:
+      return val;
+    default:
+      return val;
+    }
+  }
 }
 
 
@@ -343,7 +623,7 @@ reset_input_controller (j_decompress_ptr cinfo)
   inputctl->pub.consume_input = consume_markers;
   inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
   inputctl->pub.eoi_reached = FALSE;
-  inputctl->inheaders = TRUE;
+  inputctl->inheaders = 1;
   /* Reset other modules */
   (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
   (*cinfo->marker->reset_marker_reader) (cinfo);
@@ -377,5 +657,5 @@ jinit_input_controller (j_decompress_ptr cinfo)
    */
   inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
   inputctl->pub.eoi_reached = FALSE;
-  inputctl->inheaders = TRUE;
+  inputctl->inheaders = 1;
 }

jdmainct.c

@@ -161,7 +161,7 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
 {
   my_main_ptr main = (my_main_ptr) cinfo->main;
   int ci, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf;
 
@@ -175,8 +175,8 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
     /* Get space for pointer lists --- M+4 row groups in each list.
      * We alloc both pointer lists with one call to save a few cycles.
      */
@@ -202,14 +202,14 @@ make_funny_pointers (j_decompress_ptr cinfo)
 {
   my_main_ptr main = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY buf, xbuf0, xbuf1;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
     xbuf0 = main->xbuffer[0][ci];
     xbuf1 = main->xbuffer[1][ci];
     /* First copy the workspace pointers as-is */
@@ -242,14 +242,14 @@ set_wraparound_pointers (j_decompress_ptr cinfo)
 {
   my_main_ptr main = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf0, xbuf1;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
     xbuf0 = main->xbuffer[0][ci];
     xbuf1 = main->xbuffer[1][ci];
     for (i = 0; i < rgroup; i++) {
@@ -277,8 +277,8 @@ set_bottom_pointers (j_decompress_ptr cinfo)
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     /* Count sample rows in one iMCU row and in one row group */
-    iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;
-    rgroup = iMCUheight / cinfo->min_DCT_scaled_size;
+    iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size;
+    rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size;
     /* Count nondummy sample rows remaining for this component */
     rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
     if (rows_left == 0) rows_left = iMCUheight;
@@ -357,7 +357,7 @@ process_data_simple_main (j_decompress_ptr cinfo,
   }
 
   /* There are always min_DCT_scaled_size row groups in an iMCU row. */
-  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;
+  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_v_scaled_size;
   /* Note: at the bottom of the image, we may pass extra garbage row groups
    * to the postprocessor.  The postprocessor has to check for bottom
    * of image anyway (at row resolution), so no point in us doing it too.
@@ -417,7 +417,7 @@ process_data_context_main (j_decompress_ptr cinfo,
   case CTX_PREPARE_FOR_IMCU:
     /* Prepare to process first M-1 row groups of this iMCU row */
     main->rowgroup_ctr = 0;
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);
+    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1);
     /* Check for bottom of image: if so, tweak pointers to "duplicate"
      * the last sample row, and adjust rowgroups_avail to ignore padding rows.
      */
@@ -440,8 +440,8 @@ process_data_context_main (j_decompress_ptr cinfo,
     main->buffer_full = FALSE;
     /* Still need to process last row group of this iMCU row, */
     /* which is saved at index M+1 of the other xbuffer */
-    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);
+    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1);
+    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2);
     main->context_state = CTX_POSTPONED_ROW;
   }
 }
@@ -492,21 +492,21 @@ jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
    * ngroups is the number of row groups we need.
    */
   if (cinfo->upsample->need_context_rows) {
-    if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */
+    if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */
       ERREXIT(cinfo, JERR_NOTIMPL);
     alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
-    ngroups = cinfo->min_DCT_scaled_size + 2;
+    ngroups = cinfo->min_DCT_v_scaled_size + 2;
   } else {
-    ngroups = cinfo->min_DCT_scaled_size;
+    ngroups = cinfo->min_DCT_v_scaled_size;
   }
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
     main->buffer[ci] = (*cinfo->mem->alloc_sarray)
 			((j_common_ptr) cinfo, JPOOL_IMAGE,
-			 compptr->width_in_blocks * compptr->DCT_scaled_size,
+			 compptr->width_in_blocks * compptr->DCT_h_scaled_size,
 			 (JDIMENSION) (rgroup * ngroups));
   }
 }

jdmarker.c

@@ -1,7 +1,8 @@
 /*
  * jdmarker.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -85,6 +86,28 @@ typedef enum {			/* JPEG marker codes */
 } JPEG_MARKER;
 
 
+/* Private state */
+
+typedef struct {
+  struct jpeg_marker_reader pub; /* public fields */
+
+  /* Application-overridable marker processing methods */
+  jpeg_marker_parser_method process_COM;
+  jpeg_marker_parser_method process_APPn[16];
+
+  /* Limit on marker data length to save for each marker type */
+  unsigned int length_limit_COM;
+  unsigned int length_limit_APPn[16];
+
+  /* Status of COM/APPn marker saving */
+  jpeg_saved_marker_ptr cur_marker;	/* NULL if not processing a marker */
+  unsigned int bytes_read;		/* data bytes read so far in marker */
+  /* Note: cur_marker is not linked into marker_list until it's all read. */
+} my_marker_reader;
+
+typedef my_marker_reader * my_marker_ptr;
+
+
 /*
  * Macros for fetching data from the data source module.
  *
@@ -104,7 +127,7 @@ typedef enum {			/* JPEG marker codes */
 	( datasrc->next_input_byte = next_input_byte,  \
 	  datasrc->bytes_in_buffer = bytes_in_buffer )
 
-/* Reload the local copies --- seldom used except in MAKE_BYTE_AVAIL */
+/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */
 #define INPUT_RELOAD(cinfo)  \
 	( next_input_byte = datasrc->next_input_byte,  \
 	  bytes_in_buffer = datasrc->bytes_in_buffer )
@@ -118,14 +141,14 @@ typedef enum {			/* JPEG marker codes */
 	  if (! (*datasrc->fill_input_buffer) (cinfo))  \
 	    { action; }  \
 	  INPUT_RELOAD(cinfo);  \
-	}  \
-	bytes_in_buffer--
+	}
 
 /* Read a byte into variable V.
  * If must suspend, take the specified action (typically "return FALSE").
  */
 #define INPUT_BYTE(cinfo,V,action)  \
 	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
 		  V = GETJOCTET(*next_input_byte++); )
 
 /* As above, but read two bytes interpreted as an unsigned 16-bit integer.
@@ -133,8 +156,10 @@ typedef enum {			/* JPEG marker codes */
  */
 #define INPUT_2BYTES(cinfo,V,action)  \
 	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
 		  V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \
 		  MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
 		  V += GETJOCTET(*next_input_byte++); )
 
 
@@ -150,11 +175,18 @@ typedef enum {			/* JPEG marker codes */
  *   marker parameters; restart point has not been moved.  Same routine
  *   will be called again after application supplies more input data.
  *
- * This approach to suspension assumes that all of a marker's parameters can
- * fit into a single input bufferload.  This should hold for "normal"
- * markers.  Some COM/APPn markers might have large parameter segments,
- * but we use skip_input_data to get past those, and thereby put the problem
- * on the source manager's shoulders.
+ * This approach to suspension assumes that all of a marker's parameters
+ * can fit into a single input bufferload.  This should hold for "normal"
+ * markers.  Some COM/APPn markers might have large parameter segments
+ * that might not fit.  If we are simply dropping such a marker, we use
+ * skip_input_data to get past it, and thereby put the problem on the
+ * source manager's shoulders.  If we are saving the marker's contents
+ * into memory, we use a slightly different convention: when forced to
+ * suspend, the marker processor updates the restart point to the end of
+ * what it's consumed (ie, the end of the buffer) before returning FALSE.
+ * On resumption, cinfo->unread_marker still contains the marker code,
+ * but the data source will point to the next chunk of marker data.
+ * The marker processor must retain internal state to deal with this.
  *
  * Note that we don't bother to avoid duplicate trace messages if a
  * suspension occurs within marker parameters.  Other side effects
@@ -188,7 +220,9 @@ get_soi (j_decompress_ptr cinfo)
   cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
 
   cinfo->saw_JFIF_marker = FALSE;
-  cinfo->density_unit = 0;	/* set default JFIF APP0 values */
+  cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */
+  cinfo->JFIF_minor_version = 1;
+  cinfo->density_unit = 0;
   cinfo->X_density = 1;
   cinfo->Y_density = 1;
   cinfo->saw_Adobe_marker = FALSE;
@@ -201,7 +235,8 @@ get_soi (j_decompress_ptr cinfo)
 
 
 LOCAL(boolean)
-get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
+get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog,
+	 boolean is_arith)
 /* Process a SOFn marker */
 {
   INT32 length;
@@ -209,6 +244,7 @@ get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
   jpeg_component_info * compptr;
   INPUT_VARS(cinfo);
 
+  cinfo->is_baseline = is_baseline;
   cinfo->progressive_mode = is_prog;
   cinfo->arith_code = is_arith;
 
@@ -280,11 +316,13 @@ get_sos (j_decompress_ptr cinfo)
 
   INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */
 
-  if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN)
-    ERREXIT(cinfo, JERR_BAD_LENGTH);
-
   TRACEMS1(cinfo, 1, JTRC_SOS, n);
 
+  if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN ||
+      (n == 0 && !cinfo->progressive_mode))
+      /* pseudo SOS marker only allowed in progressive mode */
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   cinfo->comps_in_scan = n;
 
   /* Collect the component-spec parameters */
@@ -326,119 +364,15 @@ get_sos (j_decompress_ptr cinfo)
   /* Prepare to scan data & restart markers */
   cinfo->marker->next_restart_num = 0;
 
-  /* Count another SOS marker */
-  cinfo->input_scan_number++;
+  /* Count another (non-pseudo) SOS marker */
+  if (n) cinfo->input_scan_number++;
 
   INPUT_SYNC(cinfo);
   return TRUE;
 }
 
 
-METHODDEF(boolean)
-get_app0 (j_decompress_ptr cinfo)
-/* Process an APP0 marker */
-{
-#define JFIF_LEN 14
-  INT32 length;
-  UINT8 b[JFIF_LEN];
-  int buffp;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-
-  /* See if a JFIF APP0 marker is present */
-
-  if (length >= JFIF_LEN) {
-    for (buffp = 0; buffp < JFIF_LEN; buffp++)
-      INPUT_BYTE(cinfo, b[buffp], return FALSE);
-    length -= JFIF_LEN;
-
-    if (b[0]==0x4A && b[1]==0x46 && b[2]==0x49 && b[3]==0x46 && b[4]==0) {
-      /* Found JFIF APP0 marker: check version */
-      /* Major version must be 1, anything else signals an incompatible change.
-       * We used to treat this as an error, but now it's a nonfatal warning,
-       * because some bozo at Hijaak couldn't read the spec.
-       * Minor version should be 0..2, but process anyway if newer.
-       */
-      if (b[5] != 1)
-	WARNMS2(cinfo, JWRN_JFIF_MAJOR, b[5], b[6]);
-      else if (b[6] > 2)
-	TRACEMS2(cinfo, 1, JTRC_JFIF_MINOR, b[5], b[6]);
-      /* Save info */
-      cinfo->saw_JFIF_marker = TRUE;
-      cinfo->density_unit = b[7];
-      cinfo->X_density = (b[8] << 8) + b[9];
-      cinfo->Y_density = (b[10] << 8) + b[11];
-      TRACEMS3(cinfo, 1, JTRC_JFIF,
-	       cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
-      if (b[12] | b[13])
-	TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, b[12], b[13]);
-      if (length != ((INT32) b[12] * (INT32) b[13] * (INT32) 3))
-	TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) length);
-    } else {
-      /* Start of APP0 does not match "JFIF" */
-      TRACEMS1(cinfo, 1, JTRC_APP0, (int) length + JFIF_LEN);
-    }
-  } else {
-    /* Too short to be JFIF marker */
-    TRACEMS1(cinfo, 1, JTRC_APP0, (int) length);
-  }
-
-  INPUT_SYNC(cinfo);
-  if (length > 0)		/* skip any remaining data -- could be lots */
-    (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
-  return TRUE;
-}
-
-
-METHODDEF(boolean)
-get_app14 (j_decompress_ptr cinfo)
-/* Process an APP14 marker */
-{
-#define ADOBE_LEN 12
-  INT32 length;
-  UINT8 b[ADOBE_LEN];
-  int buffp;
-  unsigned int version, flags0, flags1, transform;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-
-  /* See if an Adobe APP14 marker is present */
-
-  if (length >= ADOBE_LEN) {
-    for (buffp = 0; buffp < ADOBE_LEN; buffp++)
-      INPUT_BYTE(cinfo, b[buffp], return FALSE);
-    length -= ADOBE_LEN;
-
-    if (b[0]==0x41 && b[1]==0x64 && b[2]==0x6F && b[3]==0x62 && b[4]==0x65) {
-      /* Found Adobe APP14 marker */
-      version = (b[5] << 8) + b[6];
-      flags0 = (b[7] << 8) + b[8];
-      flags1 = (b[9] << 8) + b[10];
-      transform = b[11];
-      TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
-      cinfo->saw_Adobe_marker = TRUE;
-      cinfo->Adobe_transform = (UINT8) transform;
-    } else {
-      /* Start of APP14 does not match "Adobe" */
-      TRACEMS1(cinfo, 1, JTRC_APP14, (int) length + ADOBE_LEN);
-    }
-  } else {
-    /* Too short to be Adobe marker */
-    TRACEMS1(cinfo, 1, JTRC_APP14, (int) length);
-  }
-
-  INPUT_SYNC(cinfo);
-  if (length > 0)		/* skip any remaining data -- could be lots */
-    (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
-  return TRUE;
-}
-
+#ifdef D_ARITH_CODING_SUPPORTED
 
 LOCAL(boolean)
 get_dac (j_decompress_ptr cinfo)
@@ -472,10 +406,19 @@ get_dac (j_decompress_ptr cinfo)
     }
   }
 
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   INPUT_SYNC(cinfo);
   return TRUE;
 }
 
+#else /* ! D_ARITH_CODING_SUPPORTED */
+
+#define get_dac(cinfo)  skip_variable(cinfo)
+
+#endif /* D_ARITH_CODING_SUPPORTED */
+
 
 LOCAL(boolean)
 get_dht (j_decompress_ptr cinfo)
@@ -491,7 +434,7 @@ get_dht (j_decompress_ptr cinfo)
   INPUT_2BYTES(cinfo, length, return FALSE);
   length -= 2;
   
-  while (length > 0) {
+  while (length > 16) {
     INPUT_BYTE(cinfo, index, return FALSE);
 
     TRACEMS1(cinfo, 1, JTRC_DHT, index);
@@ -512,8 +455,11 @@ get_dht (j_decompress_ptr cinfo)
 	     bits[9], bits[10], bits[11], bits[12],
 	     bits[13], bits[14], bits[15], bits[16]);
 
+    /* Here we just do minimal validation of the counts to avoid walking
+     * off the end of our table space.  jdhuff.c will check more carefully.
+     */
     if (count > 256 || ((INT32) count) > length)
-      ERREXIT(cinfo, JERR_DHT_COUNTS);
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
 
     for (i = 0; i < count; i++)
       INPUT_BYTE(cinfo, huffval[i], return FALSE);
@@ -537,6 +483,9 @@ get_dht (j_decompress_ptr cinfo)
     MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval));
   }
 
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   INPUT_SYNC(cinfo);
   return TRUE;
 }
@@ -546,16 +495,18 @@ LOCAL(boolean)
 get_dqt (j_decompress_ptr cinfo)
 /* Process a DQT marker */
 {
-  INT32 length;
-  int n, i, prec;
+  INT32 length, count, i;
+  int n, prec;
   unsigned int tmp;
   JQUANT_TBL *quant_ptr;
+  const int *natural_order;
   INPUT_VARS(cinfo);
 
   INPUT_2BYTES(cinfo, length, return FALSE);
   length -= 2;
 
   while (length > 0) {
+    length--;
     INPUT_BYTE(cinfo, n, return FALSE);
     prec = n >> 4;
     n &= 0x0F;
@@ -569,13 +520,43 @@ get_dqt (j_decompress_ptr cinfo)
       cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo);
     quant_ptr = cinfo->quant_tbl_ptrs[n];
 
+    if (prec) {
+      if (length < DCTSIZE2 * 2) {
+	/* Initialize full table for safety. */
 	for (i = 0; i < DCTSIZE2; i++) {
+	  quant_ptr->quantval[i] = 1;
+	}
+	count = length >> 1;
+      } else
+	count = DCTSIZE2;
+    } else {
+      if (length < DCTSIZE2) {
+	/* Initialize full table for safety. */
+	for (i = 0; i < DCTSIZE2; i++) {
+	  quant_ptr->quantval[i] = 1;
+	}
+	count = length;
+      } else
+	count = DCTSIZE2;
+    }
+
+    switch (count) {
+    case (2*2): natural_order = jpeg_natural_order2; break;
+    case (3*3): natural_order = jpeg_natural_order3; break;
+    case (4*4): natural_order = jpeg_natural_order4; break;
+    case (5*5): natural_order = jpeg_natural_order5; break;
+    case (6*6): natural_order = jpeg_natural_order6; break;
+    case (7*7): natural_order = jpeg_natural_order7; break;
+    default:    natural_order = jpeg_natural_order;  break;
+    }
+
+    for (i = 0; i < count; i++) {
       if (prec)
 	INPUT_2BYTES(cinfo, tmp, return FALSE);
       else
 	INPUT_BYTE(cinfo, tmp, return FALSE);
       /* We convert the zigzag-order table to natural array order. */
-      quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp;
+      quant_ptr->quantval[natural_order[i]] = (UINT16) tmp;
     }
 
     if (cinfo->err->trace_level >= 2) {
@@ -588,10 +569,13 @@ get_dqt (j_decompress_ptr cinfo)
       }
     }
 
-    length -= DCTSIZE2+1;
-    if (prec) length -= DCTSIZE2;
+    length -= count;
+    if (prec) length -= count;
   }
 
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   INPUT_SYNC(cinfo);
   return TRUE;
 }
@@ -621,6 +605,279 @@ get_dri (j_decompress_ptr cinfo)
 }
 
 
+/*
+ * Routines for processing APPn and COM markers.
+ * These are either saved in memory or discarded, per application request.
+ * APP0 and APP14 are specially checked to see if they are
+ * JFIF and Adobe markers, respectively.
+ */
+
+#define APP0_DATA_LEN	14	/* Length of interesting data in APP0 */
+#define APP14_DATA_LEN	12	/* Length of interesting data in APP14 */
+#define APPN_DATA_LEN	14	/* Must be the largest of the above!! */
+
+
+LOCAL(void)
+examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
+	      unsigned int datalen, INT32 remaining)
+/* Examine first few bytes from an APP0.
+ * Take appropriate action if it is a JFIF marker.
+ * datalen is # of bytes at data[], remaining is length of rest of marker data.
+ */
+{
+  INT32 totallen = (INT32) datalen + remaining;
+
+  if (datalen >= APP0_DATA_LEN &&
+      GETJOCTET(data[0]) == 0x4A &&
+      GETJOCTET(data[1]) == 0x46 &&
+      GETJOCTET(data[2]) == 0x49 &&
+      GETJOCTET(data[3]) == 0x46 &&
+      GETJOCTET(data[4]) == 0) {
+    /* Found JFIF APP0 marker: save info */
+    cinfo->saw_JFIF_marker = TRUE;
+    cinfo->JFIF_major_version = GETJOCTET(data[5]);
+    cinfo->JFIF_minor_version = GETJOCTET(data[6]);
+    cinfo->density_unit = GETJOCTET(data[7]);
+    cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
+    cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
+    /* Check version.
+     * Major version must be 1, anything else signals an incompatible change.
+     * (We used to treat this as an error, but now it's a nonfatal warning,
+     * because some bozo at Hijaak couldn't read the spec.)
+     * Minor version should be 0..2, but process anyway if newer.
+     */
+    if (cinfo->JFIF_major_version != 1)
+      WARNMS2(cinfo, JWRN_JFIF_MAJOR,
+	      cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
+    /* Generate trace messages */
+    TRACEMS5(cinfo, 1, JTRC_JFIF,
+	     cinfo->JFIF_major_version, cinfo->JFIF_minor_version,
+	     cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
+    /* Validate thumbnail dimensions and issue appropriate messages */
+    if (GETJOCTET(data[12]) | GETJOCTET(data[13]))
+      TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL,
+	       GETJOCTET(data[12]), GETJOCTET(data[13]));
+    totallen -= APP0_DATA_LEN;
+    if (totallen !=
+	((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3))
+      TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen);
+  } else if (datalen >= 6 &&
+      GETJOCTET(data[0]) == 0x4A &&
+      GETJOCTET(data[1]) == 0x46 &&
+      GETJOCTET(data[2]) == 0x58 &&
+      GETJOCTET(data[3]) == 0x58 &&
+      GETJOCTET(data[4]) == 0) {
+    /* Found JFIF "JFXX" extension APP0 marker */
+    /* The library doesn't actually do anything with these,
+     * but we try to produce a helpful trace message.
+     */
+    switch (GETJOCTET(data[5])) {
+    case 0x10:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen);
+      break;
+    case 0x11:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen);
+      break;
+    case 0x13:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen);
+      break;
+    default:
+      TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION,
+	       GETJOCTET(data[5]), (int) totallen);
+      break;
+    }
+  } else {
+    /* Start of APP0 does not match "JFIF" or "JFXX", or too short */
+    TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen);
+  }
+}
+
+
+LOCAL(void)
+examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data,
+	       unsigned int datalen, INT32 remaining)
+/* Examine first few bytes from an APP14.
+ * Take appropriate action if it is an Adobe marker.
+ * datalen is # of bytes at data[], remaining is length of rest of marker data.
+ */
+{
+  unsigned int version, flags0, flags1, transform;
+
+  if (datalen >= APP14_DATA_LEN &&
+      GETJOCTET(data[0]) == 0x41 &&
+      GETJOCTET(data[1]) == 0x64 &&
+      GETJOCTET(data[2]) == 0x6F &&
+      GETJOCTET(data[3]) == 0x62 &&
+      GETJOCTET(data[4]) == 0x65) {
+    /* Found Adobe APP14 marker */
+    version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]);
+    flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]);
+    flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]);
+    transform = GETJOCTET(data[11]);
+    TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
+    cinfo->saw_Adobe_marker = TRUE;
+    cinfo->Adobe_transform = (UINT8) transform;
+  } else {
+    /* Start of APP14 does not match "Adobe", or too short */
+    TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining));
+  }
+}
+
+
+METHODDEF(boolean)
+get_interesting_appn (j_decompress_ptr cinfo)
+/* Process an APP0 or APP14 marker without saving it */
+{
+  INT32 length;
+  JOCTET b[APPN_DATA_LEN];
+  unsigned int i, numtoread;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
+
+  /* get the interesting part of the marker data */
+  if (length >= APPN_DATA_LEN)
+    numtoread = APPN_DATA_LEN;
+  else if (length > 0)
+    numtoread = (unsigned int) length;
+  else
+    numtoread = 0;
+  for (i = 0; i < numtoread; i++)
+    INPUT_BYTE(cinfo, b[i], return FALSE);
+  length -= numtoread;
+
+  /* process it */
+  switch (cinfo->unread_marker) {
+  case M_APP0:
+    examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length);
+    break;
+  case M_APP14:
+    examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length);
+    break;
+  default:
+    /* can't get here unless jpeg_save_markers chooses wrong processor */
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
+    break;
+  }
+
+  /* skip any remaining data -- could be lots */
+  INPUT_SYNC(cinfo);
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
+
+  return TRUE;
+}
+
+
+#ifdef SAVE_MARKERS_SUPPORTED
+
+METHODDEF(boolean)
+save_marker (j_decompress_ptr cinfo)
+/* Save an APPn or COM marker into the marker list */
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  jpeg_saved_marker_ptr cur_marker = marker->cur_marker;
+  unsigned int bytes_read, data_length;
+  JOCTET FAR * data;
+  INT32 length = 0;
+  INPUT_VARS(cinfo);
+
+  if (cur_marker == NULL) {
+    /* begin reading a marker */
+    INPUT_2BYTES(cinfo, length, return FALSE);
+    length -= 2;
+    if (length >= 0) {		/* watch out for bogus length word */
+      /* figure out how much we want to save */
+      unsigned int limit;
+      if (cinfo->unread_marker == (int) M_COM)
+	limit = marker->length_limit_COM;
+      else
+	limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0];
+      if ((unsigned int) length < limit)
+	limit = (unsigned int) length;
+      /* allocate and initialize the marker item */
+      cur_marker = (jpeg_saved_marker_ptr)
+	(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				    SIZEOF(struct jpeg_marker_struct) + limit);
+      cur_marker->next = NULL;
+      cur_marker->marker = (UINT8) cinfo->unread_marker;
+      cur_marker->original_length = (unsigned int) length;
+      cur_marker->data_length = limit;
+      /* data area is just beyond the jpeg_marker_struct */
+      data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1);
+      marker->cur_marker = cur_marker;
+      marker->bytes_read = 0;
+      bytes_read = 0;
+      data_length = limit;
+    } else {
+      /* deal with bogus length word */
+      bytes_read = data_length = 0;
+      data = NULL;
+    }
+  } else {
+    /* resume reading a marker */
+    bytes_read = marker->bytes_read;
+    data_length = cur_marker->data_length;
+    data = cur_marker->data + bytes_read;
+  }
+
+  while (bytes_read < data_length) {
+    INPUT_SYNC(cinfo);		/* move the restart point to here */
+    marker->bytes_read = bytes_read;
+    /* If there's not at least one byte in buffer, suspend */
+    MAKE_BYTE_AVAIL(cinfo, return FALSE);
+    /* Copy bytes with reasonable rapidity */
+    while (bytes_read < data_length && bytes_in_buffer > 0) {
+      *data++ = *next_input_byte++;
+      bytes_in_buffer--;
+      bytes_read++;
+    }
+  }
+
+  /* Done reading what we want to read */
+  if (cur_marker != NULL) {	/* will be NULL if bogus length word */
+    /* Add new marker to end of list */
+    if (cinfo->marker_list == NULL) {
+      cinfo->marker_list = cur_marker;
+    } else {
+      jpeg_saved_marker_ptr prev = cinfo->marker_list;
+      while (prev->next != NULL)
+	prev = prev->next;
+      prev->next = cur_marker;
+    }
+    /* Reset pointer & calc remaining data length */
+    data = cur_marker->data;
+    length = cur_marker->original_length - data_length;
+  }
+  /* Reset to initial state for next marker */
+  marker->cur_marker = NULL;
+
+  /* Process the marker if interesting; else just make a generic trace msg */
+  switch (cinfo->unread_marker) {
+  case M_APP0:
+    examine_app0(cinfo, data, data_length, length);
+    break;
+  case M_APP14:
+    examine_app14(cinfo, data, data_length, length);
+    break;
+  default:
+    TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker,
+	     (int) (data_length + length));
+    break;
+  }
+
+  /* skip any remaining data -- could be lots */
+  INPUT_SYNC(cinfo);		/* do before skip_input_data */
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
+
+  return TRUE;
+}
+
+#endif /* SAVE_MARKERS_SUPPORTED */
+
+
 METHODDEF(boolean)
 skip_variable (j_decompress_ptr cinfo)
 /* Skip over an unknown or uninteresting variable-length marker */
@@ -629,11 +886,13 @@ skip_variable (j_decompress_ptr cinfo)
   INPUT_VARS(cinfo);
 
   INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
   
   TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length);
 
   INPUT_SYNC(cinfo);		/* do before skip_input_data */
-  (*cinfo->src->skip_input_data) (cinfo, (long) length - 2L);
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
 
   return TRUE;
 }
@@ -724,6 +983,11 @@ first_marker (j_decompress_ptr cinfo)
  *
  * Returns same codes as are defined for jpeg_consume_input:
  * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
+ *
+ * Note: This function may return a pseudo SOS marker (with zero
+ * component number) for treat by input controller's consume_input.
+ * consume_input itself should filter out (skip) the pseudo marker
+ * after processing for the caller.
  */
 
 METHODDEF(int)
@@ -753,23 +1017,27 @@ read_markers (j_decompress_ptr cinfo)
       break;
 
     case M_SOF0:		/* Baseline */
+      if (! get_sof(cinfo, TRUE, FALSE, FALSE))
+	return JPEG_SUSPENDED;
+      break;
+
     case M_SOF1:		/* Extended sequential, Huffman */
-      if (! get_sof(cinfo, FALSE, FALSE))
+      if (! get_sof(cinfo, FALSE, FALSE, FALSE))
 	return JPEG_SUSPENDED;
       break;
 
     case M_SOF2:		/* Progressive, Huffman */
-      if (! get_sof(cinfo, TRUE, FALSE))
+      if (! get_sof(cinfo, FALSE, TRUE, FALSE))
 	return JPEG_SUSPENDED;
       break;
 
     case M_SOF9:		/* Extended sequential, arithmetic */
-      if (! get_sof(cinfo, FALSE, TRUE))
+      if (! get_sof(cinfo, FALSE, FALSE, TRUE))
 	return JPEG_SUSPENDED;
       break;
 
     case M_SOF10:		/* Progressive, arithmetic */
-      if (! get_sof(cinfo, TRUE, TRUE))
+      if (! get_sof(cinfo, FALSE, TRUE, TRUE))
 	return JPEG_SUSPENDED;
       break;
 
@@ -833,12 +1101,13 @@ read_markers (j_decompress_ptr cinfo)
     case M_APP13:
     case M_APP14:
     case M_APP15:
-      if (! (*cinfo->marker->process_APPn[cinfo->unread_marker - (int) M_APP0]) (cinfo))
+      if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[
+		cinfo->unread_marker - (int) M_APP0]) (cinfo))
 	return JPEG_SUSPENDED;
       break;
       
     case M_COM:
-      if (! (*cinfo->marker->process_COM) (cinfo))
+      if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
 	return JPEG_SUSPENDED;
       break;
 
@@ -1018,12 +1287,15 @@ jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired)
 METHODDEF(void)
 reset_marker_reader (j_decompress_ptr cinfo)
 {
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
   cinfo->comp_info = NULL;		/* until allocated by get_sof */
   cinfo->input_scan_number = 0;		/* no SOS seen yet */
   cinfo->unread_marker = 0;		/* no pending marker */
-  cinfo->marker->saw_SOI = FALSE;	/* set internal state too */
-  cinfo->marker->saw_SOF = FALSE;
-  cinfo->marker->discarded_bytes = 0;
+  marker->pub.saw_SOI = FALSE;		/* set internal state too */
+  marker->pub.saw_SOF = FALSE;
+  marker->pub.discarded_bytes = 0;
+  marker->cur_marker = NULL;
 }
 
 
@@ -1035,21 +1307,100 @@ reset_marker_reader (j_decompress_ptr cinfo)
 GLOBAL(void)
 jinit_marker_reader (j_decompress_ptr cinfo)
 {
+  my_marker_ptr marker;
   int i;
 
   /* Create subobject in permanent pool */
-  cinfo->marker = (struct jpeg_marker_reader *)
+  marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
-				SIZEOF(struct jpeg_marker_reader));
-  /* Initialize method pointers */
-  cinfo->marker->reset_marker_reader = reset_marker_reader;
-  cinfo->marker->read_markers = read_markers;
-  cinfo->marker->read_restart_marker = read_restart_marker;
-  cinfo->marker->process_COM = skip_variable;
-  for (i = 0; i < 16; i++)
-    cinfo->marker->process_APPn[i] = skip_variable;
-  cinfo->marker->process_APPn[0] = get_app0;
-  cinfo->marker->process_APPn[14] = get_app14;
+				SIZEOF(my_marker_reader));
+  cinfo->marker = (struct jpeg_marker_reader *) marker;
+  /* Initialize public method pointers */
+  marker->pub.reset_marker_reader = reset_marker_reader;
+  marker->pub.read_markers = read_markers;
+  marker->pub.read_restart_marker = read_restart_marker;
+  /* Initialize COM/APPn processing.
+   * By default, we examine and then discard APP0 and APP14,
+   * but simply discard COM and all other APPn.
+   */
+  marker->process_COM = skip_variable;
+  marker->length_limit_COM = 0;
+  for (i = 0; i < 16; i++) {
+    marker->process_APPn[i] = skip_variable;
+    marker->length_limit_APPn[i] = 0;
+  }
+  marker->process_APPn[0] = get_interesting_appn;
+  marker->process_APPn[14] = get_interesting_appn;
   /* Reset marker processing state */
   reset_marker_reader(cinfo);
 }
+
+
+/*
+ * Control saving of COM and APPn markers into marker_list.
+ */
+
+#ifdef SAVE_MARKERS_SUPPORTED
+
+GLOBAL(void)
+jpeg_save_markers (j_decompress_ptr cinfo, int marker_code,
+		   unsigned int length_limit)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  long maxlength;
+  jpeg_marker_parser_method processor;
+
+  /* Length limit mustn't be larger than what we can allocate
+   * (should only be a concern in a 16-bit environment).
+   */
+  maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct);
+  if (((long) length_limit) > maxlength)
+    length_limit = (unsigned int) maxlength;
+
+  /* Choose processor routine to use.
+   * APP0/APP14 have special requirements.
+   */
+  if (length_limit) {
+    processor = save_marker;
+    /* If saving APP0/APP14, save at least enough for our internal use. */
+    if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN)
+      length_limit = APP0_DATA_LEN;
+    else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN)
+      length_limit = APP14_DATA_LEN;
+  } else {
+    processor = skip_variable;
+    /* If discarding APP0/APP14, use our regular on-the-fly processor. */
+    if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14)
+      processor = get_interesting_appn;
+  }
+
+  if (marker_code == (int) M_COM) {
+    marker->process_COM = processor;
+    marker->length_limit_COM = length_limit;
+  } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) {
+    marker->process_APPn[marker_code - (int) M_APP0] = processor;
+    marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit;
+  } else
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
+}
+
+#endif /* SAVE_MARKERS_SUPPORTED */
+
+
+/*
+ * Install a special processing method for COM or APPn markers.
+ */
+
+GLOBAL(void)
+jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
+			   jpeg_marker_parser_method routine)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
+  if (marker_code == (int) M_COM)
+    marker->process_COM = routine;
+  else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15)
+    marker->process_APPn[marker_code - (int) M_APP0] = routine;
+  else
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
+}

jdmaster.c

@@ -1,7 +1,8 @@
 /*
  * jdmaster.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2002-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -61,9 +62,12 @@ use_merged_upsample (j_decompress_ptr cinfo)
       cinfo->comp_info[2].v_samp_factor != 1)
     return FALSE;
   /* furthermore, it doesn't work if we've scaled the IDCTs differently */
-  if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
-      cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
-      cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size)
+  if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
+      cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
+      cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size)
     return FALSE;
   /* ??? also need to test for upsample-time rescaling, when & if supported */
   return TRUE;			/* by golly, it'll work... */
@@ -82,61 +86,51 @@ use_merged_upsample (j_decompress_ptr cinfo)
 
 GLOBAL(void)
 jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
-/* Do computations that are needed before master selection phase */
+/* Do computations that are needed before master selection phase.
+ * This function is used for full decompression.
+ */
 {
+#ifdef IDCT_SCALING_SUPPORTED
   int ci;
   jpeg_component_info *compptr;
+#endif
 
   /* Prevent application from calling me at wrong times */
   if (cinfo->global_state != DSTATE_READY)
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
+  /* Compute core output image dimensions and DCT scaling choices. */
+  jpeg_core_output_dimensions(cinfo);
+
 #ifdef IDCT_SCALING_SUPPORTED
 
-  /* Compute actual output image dimensions and DCT scaling choices. */
-  if (cinfo->scale_num * 8 <= cinfo->scale_denom) {
-    /* Provide 1/8 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 8L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 8L);
-    cinfo->min_DCT_scaled_size = 1;
-  } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) {
-    /* Provide 1/4 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 4L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 4L);
-    cinfo->min_DCT_scaled_size = 2;
-  } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) {
-    /* Provide 1/2 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 2L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 2L);
-    cinfo->min_DCT_scaled_size = 4;
-  } else {
-    /* Provide 1/1 scaling */
-    cinfo->output_width = cinfo->image_width;
-    cinfo->output_height = cinfo->image_height;
-    cinfo->min_DCT_scaled_size = DCTSIZE;
-  }
   /* In selecting the actual DCT scaling for each component, we try to
    * scale up the chroma components via IDCT scaling rather than upsampling.
    * This saves time if the upsampler gets to use 1:1 scaling.
-   * Note this code assumes that the supported DCT scalings are powers of 2.
+   * Note this code adapts subsampling ratios which are powers of 2.
    */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    int ssize = cinfo->min_DCT_scaled_size;
-    while (ssize < DCTSIZE &&
-	   (compptr->h_samp_factor * ssize * 2 <=
-	    cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) &&
-	   (compptr->v_samp_factor * ssize * 2 <=
-	    cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) {
+    int ssize = 1;
+    while (cinfo->min_DCT_h_scaled_size * ssize <=
+	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
       ssize = ssize * 2;
     }
-    compptr->DCT_scaled_size = ssize;
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
+    ssize = 1;
+    while (cinfo->min_DCT_v_scaled_size * ssize <=
+	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
+
+    /* We don't support IDCT ratios larger than 2. */
+    if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
+	compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
+    else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
+	compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
   }
 
   /* Recompute downsampled dimensions of components;
@@ -147,23 +141,14 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
     /* Size in samples, after IDCT scaling */
     compptr->downsampled_width = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width *
-		    (long) (compptr->h_samp_factor * compptr->DCT_scaled_size),
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+		    (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->downsampled_height = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height *
-		    (long) (compptr->v_samp_factor * compptr->DCT_scaled_size),
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
   }
 
-#else /* !IDCT_SCALING_SUPPORTED */
-
-  /* Hardwire it to "no scaling" */
-  cinfo->output_width = cinfo->image_width;
-  cinfo->output_height = cinfo->image_height;
-  /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE,
-   * and has computed unscaled downsampled_width and downsampled_height.
-   */
-
 #endif /* IDCT_SCALING_SUPPORTED */
 
   /* Report number of components in selected colorspace. */
@@ -370,16 +355,9 @@ master_selection (j_decompress_ptr cinfo)
   /* Inverse DCT */
   jinit_inverse_dct(cinfo);
   /* Entropy decoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef D_PROGRESSIVE_SUPPORTED
-      jinit_phuff_decoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
+  if (cinfo->arith_code)
+    jinit_arith_decoder(cinfo);
+  else {
     jinit_huff_decoder(cinfo);
   }
 
@@ -429,7 +407,7 @@ master_selection (j_decompress_ptr cinfo)
  * modules will be active during this pass and give them appropriate
  * start_pass calls.  We also set is_dummy_pass to indicate whether this
  * is a "real" output pass or a dummy pass for color quantization.
- * (In the latter case, jdapi.c will crank the pass to completion.)
+ * (In the latter case, jdapistd.c will crank the pass to completion.)
  */
 
 METHODDEF(void)

jdphuff.c

@@ -1,642 +0,0 @@
-/*
- * jdphuff.c
- *
- * Copyright (C) 1995-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy decoding routines for progressive JPEG.
- *
- * Much of the complexity here has to do with supporting input suspension.
- * If the data source module demands suspension, we want to be able to back
- * up to the start of the current MCU.  To do this, we copy state variables
- * into local working storage, and update them back to the permanent
- * storage only upon successful completion of an MCU.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdhuff.h"		/* Declarations shared with jdhuff.c */
-
-
-#ifdef D_PROGRESSIVE_SUPPORTED
-
-/*
- * Expanded entropy decoder object for progressive Huffman decoding.
- *
- * The savable_state subrecord contains fields that change within an MCU,
- * but must not be updated permanently until we complete the MCU.
- */
-
-typedef struct {
-  unsigned int EOBRUN;			/* remaining EOBs in EOBRUN */
-  int last_dc_val[MAX_COMPS_IN_SCAN];	/* last DC coef for each component */
-} savable_state;
-
-/* This macro is to work around compilers with missing or broken
- * structure assignment.  You'll need to fix this code if you have
- * such a compiler and you change MAX_COMPS_IN_SCAN.
- */
-
-#ifndef NO_STRUCT_ASSIGN
-#define ASSIGN_STATE(dest,src)  ((dest) = (src))
-#else
-#if MAX_COMPS_IN_SCAN == 4
-#define ASSIGN_STATE(dest,src)  \
-	((dest).EOBRUN = (src).EOBRUN, \
-	 (dest).last_dc_val[0] = (src).last_dc_val[0], \
-	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
-	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
-	 (dest).last_dc_val[3] = (src).last_dc_val[3])
-#endif
-#endif
-
-
-typedef struct {
-  struct jpeg_entropy_decoder pub; /* public fields */
-
-  /* These fields are loaded into local variables at start of each MCU.
-   * In case of suspension, we exit WITHOUT updating them.
-   */
-  bitread_perm_state bitstate;	/* Bit buffer at start of MCU */
-  savable_state saved;		/* Other state at start of MCU */
-
-  /* These fields are NOT loaded into local working state. */
-  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
-
-  /* Pointers to derived tables (these workspaces have image lifespan) */
-  d_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
-
-  d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */
-} phuff_entropy_decoder;
-
-typedef phuff_entropy_decoder * phuff_entropy_ptr;
-
-/* Forward declarations */
-METHODDEF(boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-
-
-/*
- * Initialize for a Huffman-compressed scan.
- */
-
-METHODDEF(void)
-start_pass_phuff_decoder (j_decompress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band, bad;
-  int ci, coefi, tbl;
-  int *coef_bit_ptr;
-  jpeg_component_info * compptr;
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* Validate scan parameters */
-  bad = FALSE;
-  if (is_DC_band) {
-    if (cinfo->Se != 0)
-      bad = TRUE;
-  } else {
-    /* need not check Ss/Se < 0 since they came from unsigned bytes */
-    if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2)
-      bad = TRUE;
-    /* AC scans may have only one component */
-    if (cinfo->comps_in_scan != 1)
-      bad = TRUE;
-  }
-  if (cinfo->Ah != 0) {
-    /* Successive approximation refinement scan: must have Al = Ah-1. */
-    if (cinfo->Al != cinfo->Ah-1)
-      bad = TRUE;
-  }
-  if (cinfo->Al > 13)		/* need not check for < 0 */
-    bad = TRUE;
-  if (bad)
-    ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
-	     cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
-  /* Update progression status, and verify that scan order is legal.
-   * Note that inter-scan inconsistencies are treated as warnings
-   * not fatal errors ... not clear if this is right way to behave.
-   */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    int cindex = cinfo->cur_comp_info[ci]->component_index;
-    coef_bit_ptr = & cinfo->coef_bits[cindex][0];
-    if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
-      WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
-    for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
-      int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
-      if (cinfo->Ah != expected)
-	WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
-      coef_bit_ptr[coefi] = cinfo->Al;
-    }
-  }
-
-  /* Select MCU decoding routine */
-  if (cinfo->Ah == 0) {
-    if (is_DC_band)
-      entropy->pub.decode_mcu = decode_mcu_DC_first;
-    else
-      entropy->pub.decode_mcu = decode_mcu_AC_first;
-  } else {
-    if (is_DC_band)
-      entropy->pub.decode_mcu = decode_mcu_DC_refine;
-    else
-      entropy->pub.decode_mcu = decode_mcu_AC_refine;
-  }
-
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    /* Make sure requested tables are present, and compute derived tables.
-     * We may build same derived table more than once, but it's not expensive.
-     */
-    if (is_DC_band) {
-      if (cinfo->Ah == 0) {	/* DC refinement needs no table */
-	tbl = compptr->dc_tbl_no;
-	if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-	    cinfo->dc_huff_tbl_ptrs[tbl] == NULL)
-	  ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
-	jpeg_make_d_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[tbl],
-				& entropy->derived_tbls[tbl]);
-      }
-    } else {
-      tbl = compptr->ac_tbl_no;
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-          cinfo->ac_huff_tbl_ptrs[tbl] == NULL)
-        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
-      jpeg_make_d_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[tbl],
-			      & entropy->derived_tbls[tbl]);
-      /* remember the single active table */
-      entropy->ac_derived_tbl = entropy->derived_tbls[tbl];
-    }
-    /* Initialize DC predictions to 0 */
-    entropy->saved.last_dc_val[ci] = 0;
-  }
-
-  /* Initialize bitread state variables */
-  entropy->bitstate.bits_left = 0;
-  entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
-  entropy->bitstate.printed_eod = FALSE;
-
-  /* Initialize private state variables */
-  entropy->saved.EOBRUN = 0;
-
-  /* Initialize restart counter */
-  entropy->restarts_to_go = cinfo->restart_interval;
-}
-
-
-/*
- * Figure F.12: extend sign bit.
- * On some machines, a shift and add will be faster than a table lookup.
- */
-
-#ifdef AVOID_TABLES
-
-#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
-
-#else
-
-#define HUFF_EXTEND(x,s)  ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
-
-static const int extend_test[16] =   /* entry n is 2**(n-1) */
-  { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
-    0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };
-
-static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
-  { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
-    ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
-    ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
-    ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };
-
-#endif /* AVOID_TABLES */
-
-
-/*
- * Check for a restart marker & resynchronize decoder.
- * Returns FALSE if must suspend.
- */
-
-LOCAL(boolean)
-process_restart (j_decompress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int ci;
-
-  /* Throw away any unused bits remaining in bit buffer; */
-  /* include any full bytes in next_marker's count of discarded bytes */
-  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
-  entropy->bitstate.bits_left = 0;
-
-  /* Advance past the RSTn marker */
-  if (! (*cinfo->marker->read_restart_marker) (cinfo))
-    return FALSE;
-
-  /* Re-initialize DC predictions to 0 */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++)
-    entropy->saved.last_dc_val[ci] = 0;
-  /* Re-init EOB run count, too */
-  entropy->saved.EOBRUN = 0;
-
-  /* Reset restart counter */
-  entropy->restarts_to_go = cinfo->restart_interval;
-
-  /* Next segment can get another out-of-data warning */
-  entropy->bitstate.printed_eod = FALSE;
-
-  return TRUE;
-}
-
-
-/*
- * Huffman MCU decoding.
- * Each of these routines decodes and returns one MCU's worth of
- * Huffman-compressed coefficients. 
- * The coefficients are reordered from zigzag order into natural array order,
- * but are not dequantized.
- *
- * The i'th block of the MCU is stored into the block pointed to by
- * MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
- *
- * We return FALSE if data source requested suspension.  In that case no
- * changes have been made to permanent state.  (Exception: some output
- * coefficients may already have been assigned.  This is harmless for
- * spectral selection, since we'll just re-assign them on the next call.
- * Successive approximation AC refinement has to be more careful, however.)
- */
-
-/*
- * MCU decoding for DC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int Al = cinfo->Al;
-  register int s, r;
-  int blkn, ci;
-  JBLOCKROW block;
-  BITREAD_STATE_VARS;
-  savable_state state;
-  d_derived_tbl * tbl;
-  jpeg_component_info * compptr;
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* Load up working state */
-  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-  ASSIGN_STATE(state, entropy->saved);
-
-  /* Outer loop handles each block in the MCU */
-
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-    tbl = entropy->derived_tbls[compptr->dc_tbl_no];
-
-    /* Decode a single block's worth of coefficients */
-
-    /* Section F.2.2.1: decode the DC coefficient difference */
-    HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
-    if (s) {
-      CHECK_BIT_BUFFER(br_state, s, return FALSE);
-      r = GET_BITS(s);
-      s = HUFF_EXTEND(r, s);
-    }
-
-    /* Convert DC difference to actual value, update last_dc_val */
-    s += state.last_dc_val[ci];
-    state.last_dc_val[ci] = s;
-    /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */
-    (*block)[0] = (JCOEF) (s << Al);
-  }
-
-  /* Completed MCU, so update state */
-  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-  ASSIGN_STATE(entropy->saved, state);
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-}
-
-
-/*
- * MCU decoding for AC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  register int s, k, r;
-  unsigned int EOBRUN;
-  JBLOCKROW block;
-  BITREAD_STATE_VARS;
-  d_derived_tbl * tbl;
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* Load up working state.
-   * We can avoid loading/saving bitread state if in an EOB run.
-   */
-  EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we care about */
-
-  /* There is always only one block per MCU */
-
-  if (EOBRUN > 0)		/* if it's a band of zeroes... */
-    EOBRUN--;			/* ...process it now (we do nothing) */
-  else {
-    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-    block = MCU_data[0];
-    tbl = entropy->ac_derived_tbl;
-
-    for (k = cinfo->Ss; k <= Se; k++) {
-      HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
-      r = s >> 4;
-      s &= 15;
-      if (s) {
-        k += r;
-        CHECK_BIT_BUFFER(br_state, s, return FALSE);
-        r = GET_BITS(s);
-        s = HUFF_EXTEND(r, s);
-	/* Scale and output coefficient in natural (dezigzagged) order */
-        (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al);
-      } else {
-        if (r == 15) {		/* ZRL */
-          k += 15;		/* skip 15 zeroes in band */
-        } else {		/* EOBr, run length is 2^r + appended bits */
-          EOBRUN = 1 << r;
-          if (r) {		/* EOBr, r > 0 */
-	    CHECK_BIT_BUFFER(br_state, r, return FALSE);
-            r = GET_BITS(r);
-            EOBRUN += r;
-          }
-	  EOBRUN--;		/* this band is processed at this moment */
-	  break;		/* force end-of-band */
-	}
-      }
-    }
-
-    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-  }
-
-  /* Completed MCU, so update state */
-  entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we care about */
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-}
-
-
-/*
- * MCU decoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
- * is not very clear on the point.
- */
-
-METHODDEF(boolean)
-decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
-  int blkn;
-  JBLOCKROW block;
-  BITREAD_STATE_VARS;
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* Load up working state */
-  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-
-  /* Outer loop handles each block in the MCU */
-
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-
-    /* Encoded data is simply the next bit of the two's-complement DC value */
-    CHECK_BIT_BUFFER(br_state, 1, return FALSE);
-    if (GET_BITS(1))
-      (*block)[0] |= p1;
-    /* Note: since we use |=, repeating the assignment later is safe */
-  }
-
-  /* Completed MCU, so update state */
-  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-}
-
-
-/*
- * MCU decoding for AC successive approximation refinement scan.
- */
-
-METHODDEF(boolean)
-decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int Se = cinfo->Se;
-  int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
-  int m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
-  register int s, k, r;
-  unsigned int EOBRUN;
-  JBLOCKROW block;
-  JCOEFPTR thiscoef;
-  BITREAD_STATE_VARS;
-  d_derived_tbl * tbl;
-  int num_newnz;
-  int newnz_pos[DCTSIZE2];
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* Load up working state */
-  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-  EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we care about */
-
-  /* There is always only one block per MCU */
-  block = MCU_data[0];
-  tbl = entropy->ac_derived_tbl;
-
-  /* If we are forced to suspend, we must undo the assignments to any newly
-   * nonzero coefficients in the block, because otherwise we'd get confused
-   * next time about which coefficients were already nonzero.
-   * But we need not undo addition of bits to already-nonzero coefficients;
-   * instead, we can test the current bit position to see if we already did it.
-   */
-  num_newnz = 0;
-
-  /* initialize coefficient loop counter to start of band */
-  k = cinfo->Ss;
-
-  if (EOBRUN == 0) {
-    for (; k <= Se; k++) {
-      HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
-      r = s >> 4;
-      s &= 15;
-      if (s) {
-	if (s != 1)		/* size of new coef should always be 1 */
-	  WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
-        CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-        if (GET_BITS(1))
-	  s = p1;		/* newly nonzero coef is positive */
-	else
-	  s = m1;		/* newly nonzero coef is negative */
-      } else {
-	if (r != 15) {
-	  EOBRUN = 1 << r;	/* EOBr, run length is 2^r + appended bits */
-	  if (r) {
-	    CHECK_BIT_BUFFER(br_state, r, goto undoit);
-	    r = GET_BITS(r);
-	    EOBRUN += r;
-	  }
-	  break;		/* rest of block is handled by EOB logic */
-	}
-	/* note s = 0 for processing ZRL */
-      }
-      /* Advance over already-nonzero coefs and r still-zero coefs,
-       * appending correction bits to the nonzeroes.  A correction bit is 1
-       * if the absolute value of the coefficient must be increased.
-       */
-      do {
-	thiscoef = *block + jpeg_natural_order[k];
-	if (*thiscoef != 0) {
-	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-	  if (GET_BITS(1)) {
-	    if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
-	      if (*thiscoef >= 0)
-		*thiscoef += p1;
-	      else
-		*thiscoef += m1;
-	    }
-	  }
-	} else {
-	  if (--r < 0)
-	    break;		/* reached target zero coefficient */
-	}
-	k++;
-      } while (k <= Se);
-      if (s) {
-	int pos = jpeg_natural_order[k];
-	/* Output newly nonzero coefficient */
-	(*block)[pos] = (JCOEF) s;
-	/* Remember its position in case we have to suspend */
-	newnz_pos[num_newnz++] = pos;
-      }
-    }
-  }
-
-  if (EOBRUN > 0) {
-    /* Scan any remaining coefficient positions after the end-of-band
-     * (the last newly nonzero coefficient, if any).  Append a correction
-     * bit to each already-nonzero coefficient.  A correction bit is 1
-     * if the absolute value of the coefficient must be increased.
-     */
-    for (; k <= Se; k++) {
-      thiscoef = *block + jpeg_natural_order[k];
-      if (*thiscoef != 0) {
-	CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-	if (GET_BITS(1)) {
-	  if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
-	    if (*thiscoef >= 0)
-	      *thiscoef += p1;
-	    else
-	      *thiscoef += m1;
-	  }
-	}
-      }
-    }
-    /* Count one block completed in EOB run */
-    EOBRUN--;
-  }
-
-  /* Completed MCU, so update state */
-  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-  entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we care about */
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-
-undoit:
-  /* Re-zero any output coefficients that we made newly nonzero */
-  while (num_newnz > 0)
-    (*block)[newnz_pos[--num_newnz]] = 0;
-
-  return FALSE;
-}
-
-
-/*
- * Module initialization routine for progressive Huffman entropy decoding.
- */
-
-GLOBAL(void)
-jinit_phuff_decoder (j_decompress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy;
-  int *coef_bit_ptr;
-  int ci, i;
-
-  entropy = (phuff_entropy_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(phuff_entropy_decoder));
-  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
-  entropy->pub.start_pass = start_pass_phuff_decoder;
-
-  /* Mark derived tables unallocated */
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    entropy->derived_tbls[i] = NULL;
-  }
-
-  /* Create progression status table */
-  cinfo->coef_bits = (int (*)[DCTSIZE2])
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				cinfo->num_components*DCTSIZE2*SIZEOF(int));
-  coef_bit_ptr = & cinfo->coef_bits[0][0];
-  for (ci = 0; ci < cinfo->num_components; ci++) 
-    for (i = 0; i < DCTSIZE2; i++)
-      *coef_bit_ptr++ = -1;
-}
-
-#endif /* D_PROGRESSIVE_SUPPORTED */

jdsample.c

@@ -2,13 +2,14 @@
  * jdsample.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2002-2008 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains upsampling routines.
  *
  * Upsampling input data is counted in "row groups".  A row group
- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size)
  * sample rows of each component.  Upsampling will normally produce
  * max_v_samp_factor pixel rows from each row group (but this could vary
  * if the upsampler is applying a scale factor of its own).
@@ -237,11 +238,11 @@ h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   register JSAMPROW inptr, outptr;
   register JSAMPLE invalue;
   JSAMPROW outend;
-  int inrow;
+  int outrow;
 
-  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
-    inptr = input_data[inrow];
-    outptr = output_data[inrow];
+  for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) {
+    inptr = input_data[outrow];
+    outptr = output_data[outrow];
     outend = outptr + cinfo->output_width;
     while (outptr < outend) {
       invalue = *inptr++;	/* don't need GETJSAMPLE() here */
@@ -285,112 +286,6 @@ h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
 }
 
 
-/*
- * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical.
- *
- * The upsampling algorithm is linear interpolation between pixel centers,
- * also known as a "triangle filter".  This is a good compromise between
- * speed and visual quality.  The centers of the output pixels are 1/4 and 3/4
- * of the way between input pixel centers.
- *
- * A note about the "bias" calculations: when rounding fractional values to
- * integer, we do not want to always round 0.5 up to the next integer.
- * If we did that, we'd introduce a noticeable bias towards larger values.
- * Instead, this code is arranged so that 0.5 will be rounded up or down at
- * alternate pixel locations (a simple ordered dither pattern).
- */
-
-METHODDEF(void)
-h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		     JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr, outptr;
-  register int invalue;
-  register JDIMENSION colctr;
-  int inrow;
-
-  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
-    inptr = input_data[inrow];
-    outptr = output_data[inrow];
-    /* Special case for first column */
-    invalue = GETJSAMPLE(*inptr++);
-    *outptr++ = (JSAMPLE) invalue;
-    *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2);
-
-    for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
-      /* General case: 3/4 * nearer pixel + 1/4 * further pixel */
-      invalue = GETJSAMPLE(*inptr++) * 3;
-      *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2);
-      *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2);
-    }
-
-    /* Special case for last column */
-    invalue = GETJSAMPLE(*inptr);
-    *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2);
-    *outptr++ = (JSAMPLE) invalue;
-  }
-}
-
-
-/*
- * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical.
- * Again a triangle filter; see comments for h2v1 case, above.
- *
- * It is OK for us to reference the adjacent input rows because we demanded
- * context from the main buffer controller (see initialization code).
- */
-
-METHODDEF(void)
-h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		     JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr0, inptr1, outptr;
-#if BITS_IN_JSAMPLE == 8
-  register int thiscolsum, lastcolsum, nextcolsum;
-#else
-  register INT32 thiscolsum, lastcolsum, nextcolsum;
-#endif
-  register JDIMENSION colctr;
-  int inrow, outrow, v;
-
-  inrow = outrow = 0;
-  while (outrow < cinfo->max_v_samp_factor) {
-    for (v = 0; v < 2; v++) {
-      /* inptr0 points to nearest input row, inptr1 points to next nearest */
-      inptr0 = input_data[inrow];
-      if (v == 0)		/* next nearest is row above */
-	inptr1 = input_data[inrow-1];
-      else			/* next nearest is row below */
-	inptr1 = input_data[inrow+1];
-      outptr = output_data[outrow++];
-
-      /* Special case for first column */
-      thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-      nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
-      lastcolsum = thiscolsum; thiscolsum = nextcolsum;
-
-      for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
-	/* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */
-	/* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */
-	nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-	*outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
-	*outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
-	lastcolsum = thiscolsum; thiscolsum = nextcolsum;
-      }
-
-      /* Special case for last column */
-      *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4);
-    }
-    inrow++;
-  }
-}
-
-
 /*
  * Module initialization routine for upsampling.
  */
@@ -401,7 +296,7 @@ jinit_upsampler (j_decompress_ptr cinfo)
   my_upsample_ptr upsample;
   int ci;
   jpeg_component_info * compptr;
-  boolean need_buffer, do_fancy;
+  boolean need_buffer;
   int h_in_group, v_in_group, h_out_group, v_out_group;
 
   upsample = (my_upsample_ptr)
@@ -415,11 +310,6 @@ jinit_upsampler (j_decompress_ptr cinfo)
   if (cinfo->CCIR601_sampling)	/* this isn't supported */
     ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
 
-  /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1,
-   * so don't ask for it.
-   */
-  do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1;
-
   /* Verify we can handle the sampling factors, select per-component methods,
    * and create storage as needed.
    */
@@ -428,10 +318,10 @@ jinit_upsampler (j_decompress_ptr cinfo)
     /* Compute size of an "input group" after IDCT scaling.  This many samples
      * are to be converted to max_h_samp_factor * max_v_samp_factor pixels.
      */
-    h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
-    v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
+    h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) /
+		 cinfo->min_DCT_h_scaled_size;
+    v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		 cinfo->min_DCT_v_scaled_size;
     h_out_group = cinfo->max_h_samp_factor;
     v_out_group = cinfo->max_v_samp_factor;
     upsample->rowgroup_height[ci] = v_in_group; /* save for use later */
@@ -446,18 +336,11 @@ jinit_upsampler (j_decompress_ptr cinfo)
       need_buffer = FALSE;
     } else if (h_in_group * 2 == h_out_group &&
 	       v_in_group == v_out_group) {
-      /* Special cases for 2h1v upsampling */
-      if (do_fancy && compptr->downsampled_width > 2)
-	upsample->methods[ci] = h2v1_fancy_upsample;
-      else
+      /* Special case for 2h1v upsampling */
       upsample->methods[ci] = h2v1_upsample;
     } else if (h_in_group * 2 == h_out_group &&
 	       v_in_group * 2 == v_out_group) {
-      /* Special cases for 2h2v upsampling */
-      if (do_fancy && compptr->downsampled_width > 2) {
-	upsample->methods[ci] = h2v2_fancy_upsample;
-	upsample->pub.need_context_rows = TRUE;
-      } else
+      /* Special case for 2h2v upsampling */
       upsample->methods[ci] = h2v2_upsample;
     } else if ((h_out_group % h_in_group) == 0 &&
 	       (v_out_group % v_in_group) == 0) {

jdtrans.c

@@ -1,7 +1,8 @@
 /*
  * jdtrans.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-1997, Thomas G. Lane.
+ * Modified 2000-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -30,6 +31,13 @@ LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo));
  * To release the memory occupied by the virtual arrays, call
  * jpeg_finish_decompress() when done with the data.
  *
+ * An alternative usage is to simply obtain access to the coefficient arrays
+ * during a buffered-image-mode decompression operation.  This is allowed
+ * after any jpeg_finish_output() call.  The arrays can be accessed until
+ * jpeg_finish_decompress() is called.  (Note that any call to the library
+ * may reposition the arrays, so don't rely on access_virt_barray() results
+ * to stay valid across library calls.)
+ *
  * Returns NULL if suspended.  This case need be checked only if
  * a suspending data source is used.
  */
@@ -41,8 +49,8 @@ jpeg_read_coefficients (j_decompress_ptr cinfo)
     /* First call: initialize active modules */
     transdecode_master_selection(cinfo);
     cinfo->global_state = DSTATE_RDCOEFS;
-  } else if (cinfo->global_state != DSTATE_RDCOEFS)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  }
+  if (cinfo->global_state == DSTATE_RDCOEFS) {
     /* Absorb whole file into the coef buffer */
     for (;;) {
       int retcode;
@@ -66,7 +74,18 @@ jpeg_read_coefficients (j_decompress_ptr cinfo)
     }
     /* Set state so that jpeg_finish_decompress does the right thing */
     cinfo->global_state = DSTATE_STOPPING;
+  }
+  /* At this point we should be in state DSTATE_STOPPING if being used
+   * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
+   * to the coefficients during a full buffered-image-mode decompression.
+   */
+  if ((cinfo->global_state == DSTATE_STOPPING ||
+       cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
     return cinfo->coef->coef_arrays;
+  }
+  /* Oops, improper usage */
+  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return NULL;			/* keep compiler happy */
 }
 
 
@@ -78,17 +97,16 @@ jpeg_read_coefficients (j_decompress_ptr cinfo)
 LOCAL(void)
 transdecode_master_selection (j_decompress_ptr cinfo)
 {
+  /* This is effectively a buffered-image operation. */
+  cinfo->buffered_image = TRUE;
+
+  /* Compute output image dimensions and related values. */
+  jpeg_core_output_dimensions(cinfo);
+
   /* Entropy decoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef D_PROGRESSIVE_SUPPORTED
-      jinit_phuff_decoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
+  if (cinfo->arith_code)
+    jinit_arith_decoder(cinfo);
+  else {
     jinit_huff_decoder(cinfo);
   }
 

jerror.c

@@ -1,7 +1,7 @@
 /*
  * jerror.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -10,6 +10,11 @@
  * stderr is the right thing to do.  Many applications will want to replace
  * some or all of these routines.
  *
+ * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile,
+ * you get a Windows-specific hack to display error messages in a dialog box.
+ * It ain't much, but it beats dropping error messages into the bit bucket,
+ * which is what happens to output to stderr under most Windows C compilers.
+ *
  * These routines are used by both the compression and decompression code.
  */
 
@@ -19,6 +24,10 @@
 #include "jversion.h"
 #include "jerror.h"
 
+#ifdef USE_WINDOWS_MESSAGEBOX
+#include <windows.h>
+#endif
+
 #ifndef EXIT_FAILURE		/* define exit() codes if not provided */
 #define EXIT_FAILURE  1
 #endif
@@ -74,6 +83,15 @@ error_exit (j_common_ptr cinfo)
  * Actual output of an error or trace message.
  * Applications may override this method to send JPEG messages somewhere
  * other than stderr.
+ *
+ * On Windows, printing to stderr is generally completely useless,
+ * so we provide optional code to produce an error-dialog popup.
+ * Most Windows applications will still prefer to override this routine,
+ * but if they don't, it'll do something at least marginally useful.
+ *
+ * NOTE: to use the library in an environment that doesn't support the
+ * C stdio library, you may have to delete the call to fprintf() entirely,
+ * not just not use this routine.
  */
 
 METHODDEF(void)
@@ -84,8 +102,14 @@ output_message (j_common_ptr cinfo)
   /* Create the message */
   (*cinfo->err->format_message) (cinfo, buffer);
 
+#ifdef USE_WINDOWS_MESSAGEBOX
+  /* Display it in a message dialog box */
+  MessageBox(GetActiveWindow(), buffer, "JPEG Library Error",
+	     MB_OK | MB_ICONERROR);
+#else
   /* Send it to stderr, adding a newline */
   fprintf(stderr, "%s\n", buffer);
+#endif
 }
 
 

jerror.h

@@ -1,7 +1,8 @@
 /*
  * jerror.h
  *
- * Copyright (C) 1994-1995, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 1997-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,13 +40,16 @@ typedef enum {
 JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */
 
 /* For maintenance convenience, list is alphabetical by message code name */
-JMESSAGE(JERR_ARITH_NOTIMPL,
-	 "Sorry, there are legal restrictions on arithmetic coding")
 JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix")
 JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
 JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
 JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
-JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported")
+JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request")
+JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
+JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported")
+JMESSAGE(JERR_BAD_DROP_SAMPLING,
+	 "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c")
+JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
 JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace")
 JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace")
 JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length")
@@ -71,7 +75,6 @@ JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d")
 JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request")
 JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d")
 JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x")
-JMESSAGE(JERR_DHT_COUNTS, "Bogus DHT counts")
 JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d")
 JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d")
 JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)")
@@ -92,6 +95,7 @@ JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data")
 JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change")
 JMESSAGE(JERR_NOTIMPL, "Not implemented yet")
 JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time")
+JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined")
 JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported")
 JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined")
 JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image")
@@ -134,12 +138,13 @@ JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u")
 JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u")
 JMESSAGE(JTRC_EOI, "End Of Image")
 JMESSAGE(JTRC_HUFFBITS, "        %3d %3d %3d %3d %3d %3d %3d %3d")
-JMESSAGE(JTRC_JFIF, "JFIF APP0 marker, density %dx%d  %d")
+JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d  %d")
 JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE,
 	 "Warning: thumbnail image size does not match data length %u")
-JMESSAGE(JTRC_JFIF_MINOR, "Unknown JFIF minor revision number %d.%02d")
+JMESSAGE(JTRC_JFIF_EXTENSION,
+	 "JFIF extension marker: type 0x%02x, length %u")
 JMESSAGE(JTRC_JFIF_THUMBNAIL, "    with %d x %d thumbnail image")
-JMESSAGE(JTRC_MISC_MARKER, "Skipping marker 0x%02x, length %u")
+JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u")
 JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x")
 JMESSAGE(JTRC_QUANTVALS, "        %4u %4u %4u %4u %4u %4u %4u %4u")
 JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors")
@@ -157,11 +162,18 @@ JMESSAGE(JTRC_SOS_COMPONENT, "    Component %d: dc=%d ac=%d")
 JMESSAGE(JTRC_SOS_PARAMS, "  Ss=%d, Se=%d, Ah=%d, Al=%d")
 JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s")
 JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s")
+JMESSAGE(JTRC_THUMB_JPEG,
+	 "JFIF extension marker: JPEG-compressed thumbnail image, length %u")
+JMESSAGE(JTRC_THUMB_PALETTE,
+	 "JFIF extension marker: palette thumbnail image, length %u")
+JMESSAGE(JTRC_THUMB_RGB,
+	 "JFIF extension marker: RGB thumbnail image, length %u")
 JMESSAGE(JTRC_UNKNOWN_IDS,
 	 "Unrecognized component IDs %d %d %d, assuming YCbCr")
 JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u")
 JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u")
 JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d")
+JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code")
 JMESSAGE(JWRN_BOGUS_PROGRESSION,
 	 "Inconsistent progression sequence for component %d coefficient %d")
 JMESSAGE(JWRN_EXTRANEOUS_DATA,
@@ -219,6 +231,15 @@ JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines")
    (cinfo)->err->msg_parm.i[2] = (p3), \
    (cinfo)->err->msg_parm.i[3] = (p4), \
    (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (cinfo)->err->msg_parm.i[2] = (p3), \
+   (cinfo)->err->msg_parm.i[3] = (p4), \
+   (cinfo)->err->msg_parm.i[4] = (p5), \
+   (cinfo)->err->msg_parm.i[5] = (p6), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
 #define ERREXITS(cinfo,code,str)  \
   ((cinfo)->err->msg_code = (code), \
    strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \
@@ -263,6 +284,12 @@ JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines")
 	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
 	   (cinfo)->err->msg_code = (code); \
 	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
+#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5)  \
+  MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
+	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
+	   _mp[4] = (p5); \
+	   (cinfo)->err->msg_code = (code); \
+	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
 #define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8)  \
   MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
 	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \

jfdctflt.c

@@ -2,6 +2,7 @@
  * jfdctflt.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -56,26 +57,30 @@
  */
 
 GLOBAL(void)
-jpeg_fdct_float (FAST_FLOAT * data)
+jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)
 {
   FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
   FAST_FLOAT tmp10, tmp11, tmp12, tmp13;
   FAST_FLOAT z1, z2, z3, z4, z5, z11, z13;
   FAST_FLOAT *dataptr;
+  JSAMPROW elemptr;
   int ctr;
 
   /* Pass 1: process rows. */
 
   dataptr = data;
-  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
-    tmp0 = dataptr[0] + dataptr[7];
-    tmp7 = dataptr[0] - dataptr[7];
-    tmp1 = dataptr[1] + dataptr[6];
-    tmp6 = dataptr[1] - dataptr[6];
-    tmp2 = dataptr[2] + dataptr[5];
-    tmp5 = dataptr[2] - dataptr[5];
-    tmp3 = dataptr[3] + dataptr[4];
-    tmp4 = dataptr[3] - dataptr[4];
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Load data into workspace */
+    tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]));
+    tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]));
+    tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]));
+    tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]));
+    tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]));
+    tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]));
+    tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]));
+    tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]));
 
     /* Even part */
 
@@ -84,7 +89,8 @@ jpeg_fdct_float (FAST_FLOAT * data)
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
 
-    dataptr[0] = tmp10 + tmp11; /* phase 3 */
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
     dataptr[4] = tmp10 - tmp11;
 
     z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */

jfdctfst.c

@@ -2,6 +2,7 @@
  * jfdctfst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -111,27 +112,31 @@
  */
 
 GLOBAL(void)
-jpeg_fdct_ifast (DCTELEM * data)
+jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
 {
   DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
   DCTELEM tmp10, tmp11, tmp12, tmp13;
   DCTELEM z1, z2, z3, z4, z5, z11, z13;
   DCTELEM *dataptr;
+  JSAMPROW elemptr;
   int ctr;
   SHIFT_TEMPS
 
   /* Pass 1: process rows. */
 
   dataptr = data;
-  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
-    tmp0 = dataptr[0] + dataptr[7];
-    tmp7 = dataptr[0] - dataptr[7];
-    tmp1 = dataptr[1] + dataptr[6];
-    tmp6 = dataptr[1] - dataptr[6];
-    tmp2 = dataptr[2] + dataptr[5];
-    tmp5 = dataptr[2] - dataptr[5];
-    tmp3 = dataptr[3] + dataptr[4];
-    tmp4 = dataptr[3] - dataptr[4];
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Load data into workspace */
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]);
+    tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]);
+    tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]);
+    tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]);
+    tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]);
 
     /* Even part */
 
@@ -140,7 +145,8 @@ jpeg_fdct_ifast (DCTELEM * data)
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
 
-    dataptr[0] = tmp10 + tmp11; /* phase 3 */
+    /* Apply unsigned->signed conversion */
+    dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
     dataptr[4] = tmp10 - tmp11;
 
     z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */

jidctflt.c

@@ -1,7 +1,8 @@
 /*
  * jidctflt.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2010 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -76,10 +77,9 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   FLOAT_MULT_TYPE * quantptr;
   FAST_FLOAT * wsptr;
   JSAMPROW outptr;
-  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
+  JSAMPLE *range_limit = cinfo->sample_range_limit;
   int ctr;
   FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */
-  SHIFT_TEMPS
 
   /* Pass 1: process columns from input, store into work array. */
 
@@ -96,9 +96,10 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * column DCT calculations can be simplified this way.
      */
     
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] |
-	 inptr[DCTSIZE*7]) == 0) {
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero */
       FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
       
@@ -151,12 +152,12 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */
 
     z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
-    tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */
-    tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */
+    tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */
 
     tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
     wsptr[DCTSIZE*0] = tmp0 + tmp7;
     wsptr[DCTSIZE*7] = tmp0 - tmp7;
@@ -164,8 +165,8 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     wsptr[DCTSIZE*6] = tmp1 - tmp6;
     wsptr[DCTSIZE*2] = tmp2 + tmp5;
     wsptr[DCTSIZE*5] = tmp2 - tmp5;
-    wsptr[DCTSIZE*4] = tmp3 + tmp4;
-    wsptr[DCTSIZE*3] = tmp3 - tmp4;
+    wsptr[DCTSIZE*3] = tmp3 + tmp4;
+    wsptr[DCTSIZE*4] = tmp3 - tmp4;
 
     inptr++;			/* advance pointers to next column */
     quantptr++;
@@ -173,7 +174,6 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   }
   
   /* Pass 2: process rows from work array, store into output array. */
-  /* Note that we must descale the results by a factor of 8 == 2**3. */
 
   wsptr = workspace;
   for (ctr = 0; ctr < DCTSIZE; ctr++) {
@@ -186,8 +186,10 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     
     /* Even part */
 
-    tmp10 = wsptr[0] + wsptr[4];
-    tmp11 = wsptr[0] - wsptr[4];
+    /* Apply signed->unsigned and prepare float->int conversion */
+    z5 = wsptr[0] + ((FAST_FLOAT) CENTERJSAMPLE + (FAST_FLOAT) 0.5);
+    tmp10 = z5 + wsptr[4];
+    tmp11 = z5 - wsptr[4];
 
     tmp13 = wsptr[2] + wsptr[6];
     tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13;
@@ -208,31 +210,23 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562);
 
     z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
-    tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */
-    tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */
+    tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */
 
     tmp6 = tmp12 - tmp7;
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
-    /* Final output stage: scale down by a factor of 8 and range-limit */
+    /* Final output stage: float->int conversion and range-limit */
 
-    outptr[0] = range_limit[(int) DESCALE((INT32) (tmp0 + tmp7), 3)
-			    & RANGE_MASK];
-    outptr[7] = range_limit[(int) DESCALE((INT32) (tmp0 - tmp7), 3)
-			    & RANGE_MASK];
-    outptr[1] = range_limit[(int) DESCALE((INT32) (tmp1 + tmp6), 3)
-			    & RANGE_MASK];
-    outptr[6] = range_limit[(int) DESCALE((INT32) (tmp1 - tmp6), 3)
-			    & RANGE_MASK];
-    outptr[2] = range_limit[(int) DESCALE((INT32) (tmp2 + tmp5), 3)
-			    & RANGE_MASK];
-    outptr[5] = range_limit[(int) DESCALE((INT32) (tmp2 - tmp5), 3)
-			    & RANGE_MASK];
-    outptr[4] = range_limit[(int) DESCALE((INT32) (tmp3 + tmp4), 3)
-			    & RANGE_MASK];
-    outptr[3] = range_limit[(int) DESCALE((INT32) (tmp3 - tmp4), 3)
-			    & RANGE_MASK];
+    outptr[0] = range_limit[((int) (tmp0 + tmp7)) & RANGE_MASK];
+    outptr[7] = range_limit[((int) (tmp0 - tmp7)) & RANGE_MASK];
+    outptr[1] = range_limit[((int) (tmp1 + tmp6)) & RANGE_MASK];
+    outptr[6] = range_limit[((int) (tmp1 - tmp6)) & RANGE_MASK];
+    outptr[2] = range_limit[((int) (tmp2 + tmp5)) & RANGE_MASK];
+    outptr[5] = range_limit[((int) (tmp2 - tmp5)) & RANGE_MASK];
+    outptr[3] = range_limit[((int) (tmp3 + tmp4)) & RANGE_MASK];
+    outptr[4] = range_limit[((int) (tmp3 - tmp4)) & RANGE_MASK];
     
     wsptr += DCTSIZE;		/* advance pointer to next row */
   }

jidctfst.c

@@ -1,7 +1,7 @@
 /*
  * jidctfst.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -197,9 +197,10 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * column DCT calculations can be simplified this way.
      */
     
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] |
-	 inptr[DCTSIZE*7]) == 0) {
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero */
       int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
 
@@ -289,8 +290,8 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      */
     
 #ifndef NO_ZERO_ROW_TEST
-    if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[4] | wsptr[5] | wsptr[6] |
-	 wsptr[7]) == 0) {
+    if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
+	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
       /* AC terms all zero */
       JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3)
 				  & RANGE_MASK];

jidctred.c

@@ -1,397 +0,0 @@
-/*
- * jidctred.c
- *
- * Copyright (C) 1994-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains inverse-DCT routines that produce reduced-size output:
- * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block.
- *
- * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M)
- * algorithm used in jidctint.c.  We simply replace each 8-to-8 1-D IDCT step
- * with an 8-to-4 step that produces the four averages of two adjacent outputs
- * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output).
- * These steps were derived by computing the corresponding values at the end
- * of the normal LL&M code, then simplifying as much as possible.
- *
- * 1x1 is trivial: just take the DC coefficient divided by 8.
- *
- * See jidctint.c for additional comments.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h"		/* Private declarations for DCT subsystem */
-
-#ifdef IDCT_SCALING_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/* Scaling is the same as in jidctint.c. */
-
-#if BITS_IN_JSAMPLE == 8
-#define CONST_BITS  13
-#define PASS1_BITS  2
-#else
-#define CONST_BITS  13
-#define PASS1_BITS  1		/* lose a little precision to avoid overflow */
-#endif
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 13
-#define FIX_0_211164243  ((INT32)  1730)	/* FIX(0.211164243) */
-#define FIX_0_509795579  ((INT32)  4176)	/* FIX(0.509795579) */
-#define FIX_0_601344887  ((INT32)  4926)	/* FIX(0.601344887) */
-#define FIX_0_720959822  ((INT32)  5906)	/* FIX(0.720959822) */
-#define FIX_0_765366865  ((INT32)  6270)	/* FIX(0.765366865) */
-#define FIX_0_850430095  ((INT32)  6967)	/* FIX(0.850430095) */
-#define FIX_0_899976223  ((INT32)  7373)	/* FIX(0.899976223) */
-#define FIX_1_061594337  ((INT32)  8697)	/* FIX(1.061594337) */
-#define FIX_1_272758580  ((INT32)  10426)	/* FIX(1.272758580) */
-#define FIX_1_451774981  ((INT32)  11893)	/* FIX(1.451774981) */
-#define FIX_1_847759065  ((INT32)  15137)	/* FIX(1.847759065) */
-#define FIX_2_172734803  ((INT32)  17799)	/* FIX(2.172734803) */
-#define FIX_2_562915447  ((INT32)  20995)	/* FIX(2.562915447) */
-#define FIX_3_624509785  ((INT32)  29692)	/* FIX(3.624509785) */
-#else
-#define FIX_0_211164243  FIX(0.211164243)
-#define FIX_0_509795579  FIX(0.509795579)
-#define FIX_0_601344887  FIX(0.601344887)
-#define FIX_0_720959822  FIX(0.720959822)
-#define FIX_0_765366865  FIX(0.765366865)
-#define FIX_0_850430095  FIX(0.850430095)
-#define FIX_0_899976223  FIX(0.899976223)
-#define FIX_1_061594337  FIX(1.061594337)
-#define FIX_1_272758580  FIX(1.272758580)
-#define FIX_1_451774981  FIX(1.451774981)
-#define FIX_1_847759065  FIX(1.847759065)
-#define FIX_2_172734803  FIX(2.172734803)
-#define FIX_2_562915447  FIX(2.562915447)
-#define FIX_3_624509785  FIX(3.624509785)
-#endif
-
-
-/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
- * For 8-bit samples with the recommended scaling, all the variable
- * and constant values involved are no more than 16 bits wide, so a
- * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
- * For 12-bit samples, a full 32-bit multiplication will be needed.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MULTIPLY(var,const)  MULTIPLY16C16(var,const)
-#else
-#define MULTIPLY(var,const)  ((var) * (const))
-#endif
-
-
-/* Dequantize a coefficient by multiplying it by the multiplier-table
- * entry; produce an int result.  In this module, both inputs and result
- * are 16 bits or less, so either int or short multiply will work.
- */
-
-#define DEQUANTIZE(coef,quantval)  (((ISLOW_MULT_TYPE) (coef)) * (quantval))
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 4x4 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JCOEFPTR coef_block,
-	       JSAMPARRAY output_buf, JDIMENSION output_col)
-{
-  INT32 tmp0, tmp2, tmp10, tmp12;
-  INT32 z1, z2, z3, z4;
-  JCOEFPTR inptr;
-  ISLOW_MULT_TYPE * quantptr;
-  int * wsptr;
-  JSAMPROW outptr;
-  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
-  int ctr;
-  int workspace[DCTSIZE*4];	/* buffers data between passes */
-  SHIFT_TEMPS
-
-  /* Pass 1: process columns from input, store into work array. */
-
-  inptr = coef_block;
-  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-  wsptr = workspace;
-  for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) {
-    /* Don't bother to process column 4, because second pass won't use it */
-    if (ctr == DCTSIZE-4)
-      continue;
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | inptr[DCTSIZE*7]) == 0) {
-      /* AC terms all zero; we need not examine term 4 for 4x4 output */
-      int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
-      
-      wsptr[DCTSIZE*0] = dcval;
-      wsptr[DCTSIZE*1] = dcval;
-      wsptr[DCTSIZE*2] = dcval;
-      wsptr[DCTSIZE*3] = dcval;
-      
-      continue;
-    }
-    
-    /* Even part */
-    
-    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-    tmp0 <<= (CONST_BITS+1);
-    
-    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
-    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
-
-    tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865);
-    
-    tmp10 = tmp0 + tmp2;
-    tmp12 = tmp0 - tmp2;
-    
-    /* Odd part */
-    
-    z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
-    z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
-    z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
-    z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
-    
-    tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */
-	 + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */
-	 + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */
-	 + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */
-    
-    tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */
-	 + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */
-	 + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */
-	 + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */
-
-    /* Final output stage */
-    
-    wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1);
-    wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1);
-    wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1);
-    wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1);
-  }
-  
-  /* Pass 2: process 4 rows from work array, store into output array. */
-
-  wsptr = workspace;
-  for (ctr = 0; ctr < 4; ctr++) {
-    outptr = output_buf[ctr] + output_col;
-    /* It's not clear whether a zero row test is worthwhile here ... */
-
-#ifndef NO_ZERO_ROW_TEST
-    if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[5] | wsptr[6] |
-	 wsptr[7]) == 0) {
-      /* AC terms all zero */
-      JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
-				  & RANGE_MASK];
-      
-      outptr[0] = dcval;
-      outptr[1] = dcval;
-      outptr[2] = dcval;
-      outptr[3] = dcval;
-      
-      wsptr += DCTSIZE;		/* advance pointer to next row */
-      continue;
-    }
-#endif
-    
-    /* Even part */
-    
-    tmp0 = ((INT32) wsptr[0]) << (CONST_BITS+1);
-    
-    tmp2 = MULTIPLY((INT32) wsptr[2], FIX_1_847759065)
-	 + MULTIPLY((INT32) wsptr[6], - FIX_0_765366865);
-    
-    tmp10 = tmp0 + tmp2;
-    tmp12 = tmp0 - tmp2;
-    
-    /* Odd part */
-    
-    z1 = (INT32) wsptr[7];
-    z2 = (INT32) wsptr[5];
-    z3 = (INT32) wsptr[3];
-    z4 = (INT32) wsptr[1];
-    
-    tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */
-	 + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */
-	 + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */
-	 + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */
-    
-    tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */
-	 + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */
-	 + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */
-	 + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */
-
-    /* Final output stage */
-    
-    outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    
-    wsptr += DCTSIZE;		/* advance pointer to next row */
-  }
-}
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 2x2 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JCOEFPTR coef_block,
-	       JSAMPARRAY output_buf, JDIMENSION output_col)
-{
-  INT32 tmp0, tmp10, z1;
-  JCOEFPTR inptr;
-  ISLOW_MULT_TYPE * quantptr;
-  int * wsptr;
-  JSAMPROW outptr;
-  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
-  int ctr;
-  int workspace[DCTSIZE*2];	/* buffers data between passes */
-  SHIFT_TEMPS
-
-  /* Pass 1: process columns from input, store into work array. */
-
-  inptr = coef_block;
-  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-  wsptr = workspace;
-  for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) {
-    /* Don't bother to process columns 2,4,6 */
-    if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6)
-      continue;
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*5] | inptr[DCTSIZE*7]) == 0) {
-      /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */
-      int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
-      
-      wsptr[DCTSIZE*0] = dcval;
-      wsptr[DCTSIZE*1] = dcval;
-      
-      continue;
-    }
-    
-    /* Even part */
-    
-    z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-    tmp10 = z1 << (CONST_BITS+2);
-    
-    /* Odd part */
-
-    z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
-    tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */
-    z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
-    tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */
-    z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
-    tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */
-    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
-    tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */
-
-    /* Final output stage */
-    
-    wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2);
-    wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2);
-  }
-  
-  /* Pass 2: process 2 rows from work array, store into output array. */
-
-  wsptr = workspace;
-  for (ctr = 0; ctr < 2; ctr++) {
-    outptr = output_buf[ctr] + output_col;
-    /* It's not clear whether a zero row test is worthwhile here ... */
-
-#ifndef NO_ZERO_ROW_TEST
-    if ((wsptr[1] | wsptr[3] | wsptr[5] | wsptr[7]) == 0) {
-      /* AC terms all zero */
-      JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
-				  & RANGE_MASK];
-      
-      outptr[0] = dcval;
-      outptr[1] = dcval;
-      
-      wsptr += DCTSIZE;		/* advance pointer to next row */
-      continue;
-    }
-#endif
-    
-    /* Even part */
-    
-    tmp10 = ((INT32) wsptr[0]) << (CONST_BITS+2);
-    
-    /* Odd part */
-
-    tmp0 = MULTIPLY((INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */
-	 + MULTIPLY((INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */
-	 + MULTIPLY((INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */
-	 + MULTIPLY((INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */
-
-    /* Final output stage */
-    
-    outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0,
-					  CONST_BITS+PASS1_BITS+3+2)
-			    & RANGE_MASK];
-    outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0,
-					  CONST_BITS+PASS1_BITS+3+2)
-			    & RANGE_MASK];
-    
-    wsptr += DCTSIZE;		/* advance pointer to next row */
-  }
-}
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 1x1 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JCOEFPTR coef_block,
-	       JSAMPARRAY output_buf, JDIMENSION output_col)
-{
-  int dcval;
-  ISLOW_MULT_TYPE * quantptr;
-  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
-  SHIFT_TEMPS
-
-  /* We hardly need an inverse DCT routine for this: just take the
-   * average pixel value, which is one-eighth of the DC coefficient.
-   */
-  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-  dcval = DEQUANTIZE(coef_block[0], quantptr[0]);
-  dcval = (int) DESCALE((INT32) dcval, 3);
-
-  output_buf[0][output_col] = range_limit[dcval & RANGE_MASK];
-}
-
-#endif /* IDCT_SCALING_SUPPORTED */

jmemdos.c

@@ -1,7 +1,7 @@
 /*
  * jmemdos.c
  *
- * Copyright (C) 1992-1996, Thomas G. Lane.
+ * Copyright (C) 1992-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -77,6 +77,10 @@ extern char * getenv JPP((const char * name));
 #define READ_BINARY	"rb"
 #endif
 
+#ifndef USE_MSDOS_MEMMGR	/* make sure user got configuration right */
+  You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */
+#endif
+
 #if MAX_ALLOC_CHUNK >= 65535L	/* make sure jconfig.h got this right */
   MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */
 #endif

jmemmac.c

@@ -1,13 +1,16 @@
 /*
  * jmemmac.c
  *
- * Copyright (C) 1992-1996, Thomas G. Lane.
+ * Copyright (C) 1992-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * jmemmac.c provides an Apple Macintosh implementation of the system-
  * dependent portion of the JPEG memory manager.
  *
+ * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the
+ * JPEG_INTERNALS part of jconfig.h.
+ *
  * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr
  * instead of malloc and free.  It accurately determines the amount of
  * memory available by using CompactMem.  Notice that if left to its
@@ -16,16 +19,34 @@
  * factor computed in jpeg_mem_available().  The application can ensure
  * that more space is left over by reducing max_memory_to_use.
  *
- * Large images are swapped to disk using temporary files created with
- * tmpfile(); that part of the module is the same as in jmemansi.c.
- * Metrowerks CodeWarrior's implementation of tmpfile() isn't quite what
- * we want: it puts the files in the local directory and makes them
- * user-visible -- and only deletes them when the application quits,
- * which means they stick around in the event of a crash.
- * It would be better to create the temp files in the system's temporary
- * items folder.  Perhaps someday we'll get around to doing that.
+ * Large images are swapped to disk using temporary files and System 7.0+'s
+ * temporary folder functionality.
  *
- * Contributed by Sam Bushell (jsam@iagu.on.net).
+ * Note that jmemmac.c depends on two features of MacOS that were first
+ * introduced in System 7: FindFolder and the FSSpec-based calls.
+ * If your application uses jmemmac.c and is run under System 6 or earlier,
+ * and the jpeg library decides it needs a temporary file, it will abort,
+ * printing error messages about requiring System 7.  (If no temporary files
+ * are created, it will run fine.)
+ *
+ * If you want to use jmemmac.c in an application that might be used with
+ * System 6 or earlier, then you should remove dependencies on FindFolder
+ * and the FSSpec calls.  You will need to replace FindFolder with some
+ * other mechanism for finding a place to put temporary files, and you
+ * should replace the FSSpec calls with their HFS equivalents:
+ *
+ *     FSpDelete     ->  HDelete
+ *     FSpGetFInfo   ->  HGetFInfo
+ *     FSpCreate     ->  HCreate
+ *     FSpOpenDF     ->  HOpen      *** Note: not HOpenDF ***
+ *     FSMakeFSSpec  ->  (fill in spec by hand.)
+ *
+ * (Use HOpen instead of HOpenDF.  HOpen is just a glue-interface to PBHOpen,
+ * which is on all HFS macs.  HOpenDF is a System 7 addition which avoids the
+ * ages-old problem of names starting with a period.)
+ *
+ * Contributed by Sam Bushell (jsam@iagu.on.net) and
+ * Dan Gildor (gyld@in-touch.com).
  */
 
 #define JPEG_INTERNALS
@@ -33,12 +54,22 @@
 #include "jpeglib.h"
 #include "jmemsys.h"    /* import the system-dependent declarations */
 
-#include <Memory.h>		/* we use the MacOS memory manager */
-
-#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
-#define SEEK_SET  0		/* if not, assume 0 is correct */
+#ifndef USE_MAC_MEMMGR	/* make sure user got configuration right */
+  You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */
 #endif
 
+#include <Memory.h>     /* we use the MacOS memory manager */
+#include <Files.h>      /* we use the MacOS File stuff */
+#include <Folders.h>    /* we use the MacOS HFS stuff */
+#include <Script.h>     /* for smSystemScript */
+#include <Gestalt.h>    /* we use Gestalt to test for specific functionality */
+
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "JPG%03d.TMP"
+#endif
+
+static int next_file_num;	/* to distinguish among several temp files */
+
 
 /*
  * Memory allocation and freeing are controlled by the MacOS library
@@ -124,10 +155,15 @@ read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
 		    void FAR * buffer_address,
 		    long file_offset, long byte_count)
 {
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
     ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFREAD(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
+
+  retVal = FSRead ( info->temp_file, &bytes,
+		    (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
     ERREXIT(cinfo, JERR_TFILE_READ);
 }
 
@@ -137,10 +173,15 @@ write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
 		     void FAR * buffer_address,
 		     long file_offset, long byte_count)
 {
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
     ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFWRITE(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
+
+  retVal = FSWrite ( info->temp_file, &bytes,
+		     (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
     ERREXIT(cinfo, JERR_TFILE_WRITE);
 }
 
@@ -148,30 +189,77 @@ write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
 METHODDEF(void)
 close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
 {
-  fclose(info->temp_file);
-  /* Since this implementation uses tmpfile() to create the file,
-   * no explicit file deletion is needed.
-   */
+  FSClose ( info->temp_file );
+  FSpDelete ( &(info->tempSpec) );
 }
 
 
 /*
  * Initial opening of a backing-store object.
  *
- * This version uses tmpfile(), which constructs a suitable file name
- * behind the scenes.  We don't have to use info->temp_name[] at all;
- * indeed, we can't even find out the actual name of the temp file.
+ * This version uses FindFolder to find the Temporary Items folder,
+ * and puts the temporary file in there.
  */
 
 GLOBAL(void)
 jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
 			 long total_bytes_needed)
 {
-  if ((info->temp_file = tmpfile()) == NULL)
-    ERREXITS(cinfo, JERR_TFILE_CREATE, "");
+  short         tmpRef, vRefNum;
+  long          dirID;
+  FInfo         finderInfo;
+  FSSpec        theSpec;
+  Str255        fName;
+  OSErr         osErr;
+  long          gestaltResponse = 0;
+
+  /* Check that FSSpec calls are available. */
+  osErr = Gestalt( gestaltFSAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltHasFSSpecCalls) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  /* Check that FindFolder is available. */
+  osErr = Gestalt( gestaltFindFolderAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltFindFolderPresent) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required.");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  osErr = FindFolder ( kOnSystemDisk, kTemporaryFolderType, kCreateFolder,
+                       &vRefNum, &dirID );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- temporary items folder unavailable");
+  /* TO DO: Try putting the temp files somewhere else. */
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    next_file_num++;		/* advance counter */
+
+    sprintf(info->temp_name, TEMP_FILE_NAME, next_file_num);
+    strcpy ( (Ptr)fName+1, info->temp_name );
+    *fName = strlen (info->temp_name);
+    osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec );
+
+    if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr )
+      break;
+  }
+
+  osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  info->tempSpec = theSpec;
+
   info->read_backing_store = read_backing_store;
   info->write_backing_store = write_backing_store;
   info->close_backing_store = close_backing_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
 }
 
 
@@ -183,6 +271,8 @@ jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
 GLOBAL(long)
 jpeg_mem_init (j_common_ptr cinfo)
 {
+  next_file_num = 0;
+
   /* max_memory_to_use will be initialized to FreeMem()'s result;
    * the calling application might later reduce it, for example
    * to leave room to invoke multiple JPEG objects.

jmemmgr.c

@@ -1,7 +1,7 @@
 /*
  * jmemmgr.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -1076,6 +1076,9 @@ jinit_memory_mgr (j_common_ptr cinfo)
   mem->pub.free_pool = free_pool;
   mem->pub.self_destruct = self_destruct;
 
+  /* Make MAX_ALLOC_CHUNK accessible to other modules */
+  mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK;
+
   /* Initialize working state */
   mem->pub.max_memory_to_use = max_to_use;
 

jmemname.c

@@ -1,7 +1,7 @@
 /*
  * jmemname.c
  *
- * Copyright (C) 1992-1996, Thomas G. Lane.
+ * Copyright (C) 1992-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -30,9 +30,14 @@ extern void free JPP((void *ptr));
 #define READ_BINARY	"r"
 #define RW_BINARY	"w+"
 #else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define RW_BINARY	"w+b", "ctx=stm"
+#else				/* standard ANSI-compliant case */
 #define READ_BINARY	"rb"
 #define RW_BINARY	"w+b"
 #endif
+#endif
 
 
 /*

jmemsys.h

@@ -1,7 +1,7 @@
 /*
  * jmemsys.h
  *
- * Copyright (C) 1992-1996, Thomas G. Lane.
+ * Copyright (C) 1992-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,7 +14,8 @@
  * in the IJG distribution.  You may need to modify it if you write a
  * custom memory manager.  If system-dependent changes are needed in
  * this file, the best method is to #ifdef them based on a configuration
- * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR.
+ * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR
+ * and USE_MAC_MEMMGR.
  */
 
 
@@ -114,6 +115,7 @@ EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo,
 
 #define TEMP_NAME_LENGTH   64	/* max length of a temporary file's name */
 
+
 #ifdef USE_MSDOS_MEMMGR		/* DOS-specific junk */
 
 typedef unsigned short XMSH;	/* type of extended-memory handles */
@@ -127,6 +129,11 @@ typedef union {
 
 #endif /* USE_MSDOS_MEMMGR */
 
+#ifdef USE_MAC_MEMMGR		/* Mac-specific junk */
+#include <Files.h>
+#endif /* USE_MAC_MEMMGR */
+
+
 typedef struct backing_store_struct * backing_store_ptr;
 
 typedef struct backing_store_struct {
@@ -147,13 +154,21 @@ typedef struct backing_store_struct {
   /* For the MS-DOS manager (jmemdos.c), we need: */
   handle_union handle;		/* reference to backing-store storage object */
   char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
+#else
+#ifdef USE_MAC_MEMMGR
+  /* For the Mac manager (jmemmac.c), we need: */
+  short temp_file;		/* file reference number to temp file */
+  FSSpec tempSpec;		/* the FSSpec for the temp file */
+  char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
 #else
   /* For a typical implementation with temp files, we need: */
   FILE * temp_file;		/* stdio reference to temp file */
   char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */
 #endif
+#endif
 } backing_store_info;
 
+
 /*
  * Initial opening of a backing-store object.  This must fill in the
  * read/write/close pointers in the object.  The read/write routines

jmorecfg.h

@@ -1,7 +1,8 @@
 /*
  * jmorecfg.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 1997-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -158,8 +159,14 @@ typedef short INT16;
 /* INT32 must hold at least signed 32-bit values. */
 
 #ifndef XMD_H			/* X11/xmd.h correctly defines INT32 */
+#ifndef _BASETSD_H_		/* Microsoft defines it in basetsd.h */
+#ifndef _BASETSD_H		/* MinGW is slightly different */
+#ifndef QGLOBAL_H		/* Qt defines it in qglobal.h */
 typedef long INT32;
 #endif
+#endif
+#endif
+#endif
 
 /* Datatype used for image dimensions.  The JPEG standard only supports
  * images up to 64K*64K due to 16-bit fields in SOF markers.  Therefore
@@ -209,11 +216,13 @@ typedef unsigned int JDIMENSION;
  * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol.
  */
 
+#ifndef FAR
 #ifdef NEED_FAR_POINTERS
 #define FAR  far
 #else
 #define FAR
 #endif
+#endif
 
 
 /*
@@ -256,8 +265,6 @@ typedef int boolean;
  * (You may HAVE to do that if your compiler doesn't like null source files.)
  */
 
-/* Arithmetic coding is unsupported for legal reasons.  Complaints to IBM. */
-
 /* Capability options common to encoder and decoder: */
 
 #define DCT_ISLOW_SUPPORTED	/* slow but accurate integer algorithm */
@@ -266,9 +273,10 @@ typedef int boolean;
 
 /* Encoder capability options: */
 
-#undef  C_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
+#define C_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
 #define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
 #define C_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
+#define DCT_SCALING_SUPPORTED	    /* Input rescaling via DCT? (Requires DCT_ISLOW)*/
 #define ENTROPY_OPT_SUPPORTED	    /* Optimization of entropy coding parms? */
 /* Note: if you selected 12-bit data precision, it is dangerous to turn off
  * ENTROPY_OPT_SUPPORTED.  The standard Huffman tables are only good for 8-bit
@@ -282,11 +290,12 @@ typedef int boolean;
 
 /* Decoder capability options: */
 
-#undef  D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
+#define D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
 #define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
 #define D_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
-#define BLOCK_SMOOTHING_SUPPORTED   /* Block smoothing? (Progressive only) */
 #define IDCT_SCALING_SUPPORTED	    /* Output rescaling via IDCT? */
+#define SAVE_MARKERS_SUPPORTED	    /* jpeg_save_markers() needed? */
+#define BLOCK_SMOOTHING_SUPPORTED   /* Block smoothing? (Progressive only) */
 #undef  UPSAMPLE_SCALING_SUPPORTED  /* Output rescaling at upsample stage? */
 #define UPSAMPLE_MERGING_SUPPORTED  /* Fast path for sloppy upsampling? */
 #define QUANT_1PASS_SUPPORTED	    /* 1-pass color quantization? */

jpegint.h

@@ -1,7 +1,8 @@
 /*
  * jpegint.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 1997-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -99,14 +100,16 @@ struct jpeg_downsampler {
 };
 
 /* Forward DCT (also controls coefficient quantization) */
-struct jpeg_forward_dct {
-  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
-  /* perhaps this should be an array??? */
-  JMETHOD(void, forward_DCT, (j_compress_ptr cinfo,
-			      jpeg_component_info * compptr,
+typedef JMETHOD(void, forward_DCT_ptr,
+		(j_compress_ptr cinfo, jpeg_component_info * compptr,
 		 JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
 		 JDIMENSION start_row, JDIMENSION start_col,
 		 JDIMENSION num_blocks));
+
+struct jpeg_forward_dct {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
+  /* It is useful to allow each component to have a separate FDCT method. */
+  forward_DCT_ptr forward_DCT[MAX_COMPONENTS];
 };
 
 /* Entropy encoding */
@@ -118,15 +121,16 @@ struct jpeg_entropy_encoder {
 
 /* Marker writing */
 struct jpeg_marker_writer {
-  /* write_any_marker is exported for use by applications */
-  /* Probably only COM and APPn markers should be written */
-  JMETHOD(void, write_any_marker, (j_compress_ptr cinfo, int marker,
-				   const JOCTET *dataptr, unsigned int datalen));
   JMETHOD(void, write_file_header, (j_compress_ptr cinfo));
   JMETHOD(void, write_frame_header, (j_compress_ptr cinfo));
   JMETHOD(void, write_scan_header, (j_compress_ptr cinfo));
   JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo));
   JMETHOD(void, write_tables_only, (j_compress_ptr cinfo));
+  /* These routines are exported to allow insertion of extra markers */
+  /* Probably only COM and APPn markers should be written this way */
+  JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker,
+				      unsigned int datalen));
+  JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val));
 };
 
 
@@ -194,9 +198,6 @@ struct jpeg_marker_reader {
   JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
   /* Read a restart marker --- exported for use by entropy decoder only */
   jpeg_marker_parser_method read_restart_marker;
-  /* Application-overridable marker processing methods */
-  jpeg_marker_parser_method process_COM;
-  jpeg_marker_parser_method process_APPn[16];
 
   /* State of marker reader --- nominally internal, but applications
    * supplying COM or APPn handlers might like to know the state.
@@ -301,7 +302,7 @@ struct jpeg_color_quantizer {
 #define jinit_downsampler	jIDownsampler
 #define jinit_forward_dct	jIFDCT
 #define jinit_huff_encoder	jIHEncoder
-#define jinit_phuff_encoder	jIPHEncoder
+#define jinit_arith_encoder	jIAEncoder
 #define jinit_marker_writer	jIMWriter
 #define jinit_master_decompress	jIDMaster
 #define jinit_d_main_controller	jIDMainC
@@ -310,7 +311,7 @@ struct jpeg_color_quantizer {
 #define jinit_input_controller	jIInCtlr
 #define jinit_marker_reader	jIMReader
 #define jinit_huff_decoder	jIHDecoder
-#define jinit_phuff_decoder	jIPHDecoder
+#define jinit_arith_decoder	jIADecoder
 #define jinit_inverse_dct	jIIDCT
 #define jinit_upsampler		jIUpsampler
 #define jinit_color_deconverter	jIDColor
@@ -325,6 +326,13 @@ struct jpeg_color_quantizer {
 #define jzero_far		jZeroFar
 #define jpeg_zigzag_order	jZIGTable
 #define jpeg_natural_order	jZAGTable
+#define jpeg_natural_order7	jZAGTable7
+#define jpeg_natural_order6	jZAGTable6
+#define jpeg_natural_order5	jZAGTable5
+#define jpeg_natural_order4	jZAGTable4
+#define jpeg_natural_order3	jZAGTable3
+#define jpeg_natural_order2	jZAGTable2
+#define jpeg_aritab		jAriTab
 #endif /* NEED_SHORT_EXTERNAL_NAMES */
 
 
@@ -342,7 +350,7 @@ EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
-EXTERN(void) jinit_phuff_encoder JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
 /* Decompression module initialization routines */
 EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
@@ -355,7 +363,7 @@ EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo,
 EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
-EXTERN(void) jinit_phuff_decoder JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
@@ -375,8 +383,19 @@ EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
 				  JDIMENSION num_blocks));
 EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
 /* Constant tables in jutils.c */
+#if 0				/* This table is not actually needed in v6a */
 extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
+#endif
 extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
+extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */
+extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */
+extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */
+extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */
+extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */
+extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */
+
+/* Arithmetic coding probability estimation tables in jaricom.c */
+extern const INT32 jpeg_aritab[];
 
 /* Suppress undefined-structure complaints if necessary. */
 

jpeglib.h

@@ -1,7 +1,8 @@
 /*
  * jpeglib.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2002-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -26,11 +27,17 @@
 #include "jmorecfg.h"		/* seldom changed options */
 
 
+#ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
+extern "C" {
+#endif
+#endif
+
 /* Version ID for the JPEG library.
- * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60".
+ * Might be useful for tests like "#if JPEG_LIB_VERSION >= 80".
  */
 
-#define JPEG_LIB_VERSION  61	/* Version 6a */
+#define JPEG_LIB_VERSION  80	/* Version 8.0 */
 
 
 /* Various constants determining the sizes of things.
@@ -138,18 +145,18 @@ typedef struct {
    */
   JDIMENSION width_in_blocks;
   JDIMENSION height_in_blocks;
-  /* Size of a DCT block in samples.  Always DCTSIZE for compression.
-   * For decompression this is the size of the output from one DCT block,
-   * reflecting any scaling we choose to apply during the IDCT step.
-   * Values of 1,2,4,8 are likely to be supported.  Note that different
-   * components may receive different IDCT scalings.
+  /* Size of a DCT block in samples,
+   * reflecting any scaling we choose to apply during the DCT step.
+   * Values from 1 to 16 are supported.
+   * Note that different components may receive different DCT scalings.
    */
-  int DCT_scaled_size;
+  int DCT_h_scaled_size;
+  int DCT_v_scaled_size;
   /* The downsampled dimensions are the component's actual, unpadded number
-   * of samples at the main buffer (preprocessing/compression interface), thus
-   * downsampled_width = ceil(image_width * Hi/Hmax)
-   * and similarly for height.  For decompression, IDCT scaling is included, so
-   * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE)
+   * of samples at the main buffer (preprocessing/compression interface);
+   * DCT scaling is included, so
+   * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE)
+   * and similarly for height.
    */
   JDIMENSION downsampled_width;	 /* actual width in samples */
   JDIMENSION downsampled_height; /* actual height in samples */
@@ -164,7 +171,7 @@ typedef struct {
   int MCU_width;		/* number of blocks per MCU, horizontally */
   int MCU_height;		/* number of blocks per MCU, vertically */
   int MCU_blocks;		/* MCU_width * MCU_height */
-  int MCU_sample_width;		/* MCU width in samples, MCU_width*DCT_scaled_size */
+  int MCU_sample_width;	/* MCU width in samples: MCU_width * DCT_h_scaled_size */
   int last_col_width;		/* # of non-dummy blocks across in last MCU */
   int last_row_height;		/* # of non-dummy blocks down in last MCU */
 
@@ -188,6 +195,18 @@ typedef struct {
   int Ah, Al;			/* progressive JPEG successive approx. parms */
 } jpeg_scan_info;
 
+/* The decompressor can save APPn and COM markers in a list of these: */
+
+typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr;
+
+struct jpeg_marker_struct {
+  jpeg_saved_marker_ptr next;	/* next in list, or NULL */
+  UINT8 marker;			/* marker code: JPEG_COM, or JPEG_APP0+n */
+  unsigned int original_length;	/* # bytes of data in the file */
+  unsigned int data_length;	/* # bytes of data saved at data[] */
+  JOCTET FAR * data;		/* the data contained in the marker */
+  /* the marker length word is not counted in data_length or original_length */
+};
 
 /* Known color spaces. */
 
@@ -230,8 +249,9 @@ typedef enum {
   struct jpeg_error_mgr * err;	/* Error handler module */\
   struct jpeg_memory_mgr * mem;	/* Memory manager module */\
   struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\
-  boolean is_decompressor;	/* so common code can tell which is which */\
-  int global_state		/* for checking call sequence validity */
+  void * client_data;		/* Available for use by application */\
+  boolean is_decompressor;	/* So common code can tell which is which */\
+  int global_state		/* For checking call sequence validity */
 
 /* Routines that are to be used by both halves of the library are declared
  * to receive a pointer to this structure.  There are no actual instances of
@@ -278,6 +298,17 @@ struct jpeg_compress_struct {
    * helper routines to simplify changing parameters.
    */
 
+  unsigned int scale_num, scale_denom; /* fraction by which to scale image */
+
+  JDIMENSION jpeg_width;	/* scaled JPEG image width */
+  JDIMENSION jpeg_height;	/* scaled JPEG image height */
+  /* Dimensions of actual JPEG image that will be written to file,
+   * derived from input dimensions by scaling factors above.
+   * These fields are computed by jpeg_start_compress().
+   * You can also use jpeg_calc_jpeg_dimensions() to determine these values
+   * in advance of calling jpeg_start_compress().
+   */
+
   int data_precision;		/* bits of precision in image data */
 
   int num_components;		/* # of color components in JPEG image */
@@ -287,7 +318,10 @@ struct jpeg_compress_struct {
   /* comp_info[i] describes component that appears i'th in SOF */
 
   JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
-  /* ptrs to coefficient quantization tables, or NULL if not defined */
+  int q_scale_factor[NUM_QUANT_TBLS];
+  /* ptrs to coefficient quantization tables, or NULL if not defined,
+   * and corresponding scale factors (percentage, initialized 100).
+   */
 
   JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
   JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
@@ -308,6 +342,7 @@ struct jpeg_compress_struct {
   boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
   boolean optimize_coding;	/* TRUE=optimize entropy encoding parms */
   boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
+  boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */
   int smoothing_factor;		/* 1..100, or 0 for no input smoothing */
   J_DCT_METHOD dct_method;	/* DCT algorithm selector */
 
@@ -322,6 +357,8 @@ struct jpeg_compress_struct {
   /* Parameters controlling emission of special markers. */
 
   boolean write_JFIF_header;	/* should a JFIF marker be written? */
+  UINT8 JFIF_major_version;	/* What to write for the JFIF version number */
+  UINT8 JFIF_minor_version;
   /* These three values are not used by the JPEG code, merely copied */
   /* into the JFIF APP0 marker.  density_unit can be 0 for unknown, */
   /* 1 for dots/inch, or 2 for dots/cm.  Note that the pixel aspect */
@@ -349,6 +386,9 @@ struct jpeg_compress_struct {
   int max_h_samp_factor;	/* largest h_samp_factor */
   int max_v_samp_factor;	/* largest v_samp_factor */
 
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
+
   JDIMENSION total_iMCU_rows;	/* # of iMCU rows to be input to coef ctlr */
   /* The coefficient controller receives data in units of MCU rows as defined
    * for fully interleaved scans (whether the JPEG file is interleaved or not).
@@ -374,6 +414,10 @@ struct jpeg_compress_struct {
 
   int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
 
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order;	/* natural-order position array */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) */
+
   /*
    * Links to compression subobjects (methods and private variables of modules)
    */
@@ -386,6 +430,8 @@ struct jpeg_compress_struct {
   struct jpeg_downsampler * downsample;
   struct jpeg_forward_dct * fdct;
   struct jpeg_entropy_encoder * entropy;
+  jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */
+  int script_space_size;
 };
 
 
@@ -518,6 +564,7 @@ struct jpeg_decompress_struct {
   jpeg_component_info * comp_info;
   /* comp_info[i] describes component that appears i'th in SOF */
 
+  boolean is_baseline;		/* TRUE if Baseline SOF0 encountered */
   boolean progressive_mode;	/* TRUE if SOFn specifies progressive mode */
   boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
 
@@ -531,7 +578,9 @@ struct jpeg_decompress_struct {
    * the JPEG library.
    */
   boolean saw_JFIF_marker;	/* TRUE iff a JFIF APP0 marker was found */
-  /* Data copied from JFIF marker: */
+  /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */
+  UINT8 JFIF_major_version;	/* JFIF version number */
+  UINT8 JFIF_minor_version;
   UINT8 density_unit;		/* JFIF code for pixel size units */
   UINT16 X_density;		/* Horizontal pixel density */
   UINT16 Y_density;		/* Vertical pixel density */
@@ -540,6 +589,12 @@ struct jpeg_decompress_struct {
 
   boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
 
+  /* Aside from the specific data retained from APPn markers known to the
+   * library, the uninterpreted contents of any or all APPn and COM markers
+   * can be saved in a list for examination by the application.
+   */
+  jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */
+
   /* Remaining fields are known throughout decompressor, but generally
    * should not be touched by a surrounding application.
    */
@@ -550,7 +605,8 @@ struct jpeg_decompress_struct {
   int max_h_samp_factor;	/* largest h_samp_factor */
   int max_v_samp_factor;	/* largest v_samp_factor */
 
-  int min_DCT_scaled_size;	/* smallest DCT_scaled_size of any component */
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
 
   JDIMENSION total_iMCU_rows;	/* # of iMCU rows in image */
   /* The coefficient controller's input and output progress is measured in
@@ -558,7 +614,7 @@ struct jpeg_decompress_struct {
    * in fully interleaved JPEG scans, but are used whether the scan is
    * interleaved or not.  We define an iMCU row as v_samp_factor DCT block
    * rows of each component.  Therefore, the IDCT output contains
-   * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row.
+   * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row.
    */
 
   JSAMPLE * sample_range_limit; /* table for fast range-limiting */
@@ -582,6 +638,12 @@ struct jpeg_decompress_struct {
 
   int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
 
+  /* These fields are derived from Se of first SOS marker.
+   */
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order; /* natural-order position array for entropy decode */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) for entropy decode */
+
   /* This field is shared between entropy decoder and marker parser.
    * It is either zero or the code of a JPEG marker that has been
    * read from the data source, but has not yet been processed.
@@ -772,6 +834,9 @@ struct jpeg_memory_mgr {
    * after creating the JPEG object.
    */
   long max_memory_to_use;
+
+  /* Maximum allocation request accepted by alloc_large. */
+  long max_alloc_chunk;
 };
 
 
@@ -808,11 +873,14 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_destroy_decompress	jDestDecompress
 #define jpeg_stdio_dest		jStdDest
 #define jpeg_stdio_src		jStdSrc
+#define jpeg_mem_dest		jMemDest
+#define jpeg_mem_src		jMemSrc
 #define jpeg_set_defaults	jSetDefaults
 #define jpeg_set_colorspace	jSetColorspace
 #define jpeg_default_colorspace	jDefColorspace
 #define jpeg_set_quality	jSetQuality
 #define jpeg_set_linear_quality	jSetLQuality
+#define jpeg_default_qtables	jDefQTables
 #define jpeg_add_quant_table	jAddQuantTable
 #define jpeg_quality_scaling	jQualityScaling
 #define jpeg_simple_progression	jSimProgress
@@ -822,8 +890,11 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_start_compress	jStrtCompress
 #define jpeg_write_scanlines	jWrtScanlines
 #define jpeg_finish_compress	jFinCompress
+#define jpeg_calc_jpeg_dimensions	jCjpegDimensions
 #define jpeg_write_raw_data	jWrtRawData
 #define jpeg_write_marker	jWrtMarker
+#define jpeg_write_m_header	jWrtMHeader
+#define jpeg_write_m_byte	jWrtMByte
 #define jpeg_write_tables	jWrtTables
 #define jpeg_read_header	jReadHeader
 #define jpeg_start_decompress	jStrtDecompress
@@ -836,7 +907,9 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_input_complete	jInComplete
 #define jpeg_new_colormap	jNewCMap
 #define jpeg_consume_input	jConsumeInput
+#define jpeg_core_output_dimensions	jCoreDimensions
 #define jpeg_calc_output_dimensions	jCalcDimensions
+#define jpeg_save_markers	jSaveMarkers
 #define jpeg_set_marker_processor	jSetMarker
 #define jpeg_read_coefficients	jReadCoefs
 #define jpeg_write_coefficients	jWrtCoefs
@@ -879,6 +952,14 @@ EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo));
 EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile));
 EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile));
 
+/* Data source and destination managers: memory buffers. */
+EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo,
+			       unsigned char ** outbuffer,
+			       unsigned long * outsize));
+EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo,
+			      unsigned char * inbuffer,
+			      unsigned long insize));
+
 /* Default parameter setup for compression */
 EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo));
 /* Compression parameter setup aids */
@@ -890,6 +971,8 @@ EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality,
 EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo,
 					  int scale_factor,
 					  boolean force_baseline));
+EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo,
+				       boolean force_baseline));
 EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl,
 				       const unsigned int *basic_table,
 				       int scale_factor,
@@ -909,15 +992,23 @@ EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo,
 					     JDIMENSION num_lines));
 EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo));
 
+/* Precalculate JPEG dimensions for current compression parameters. */
+EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo));
+
 /* Replaces jpeg_write_scanlines when writing raw downsampled data. */
 EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo,
 					    JSAMPIMAGE data,
 					    JDIMENSION num_lines));
 
-/* Write a special marker.  See libjpeg.doc concerning safe usage. */
+/* Write a special marker.  See libjpeg.txt concerning safe usage. */
 EXTERN(void) jpeg_write_marker
 	JPP((j_compress_ptr cinfo, int marker,
 	     const JOCTET * dataptr, unsigned int datalen));
+/* Same, but piecemeal. */
+EXTERN(void) jpeg_write_m_header
+	JPP((j_compress_ptr cinfo, int marker, unsigned int datalen));
+EXTERN(void) jpeg_write_m_byte
+	JPP((j_compress_ptr cinfo, int val));
 
 /* Alternate compression function: just write an abbreviated table file */
 EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo));
@@ -963,8 +1054,14 @@ EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo));
 #define JPEG_SCAN_COMPLETED	4 /* Completed last iMCU row of a scan */
 
 /* Precalculate output dimensions for current decompression parameters. */
+EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo));
 EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo));
 
+/* Control saving of COM and APPn markers into marker_list. */
+EXTERN(void) jpeg_save_markers
+	JPP((j_decompress_ptr cinfo, int marker_code,
+	     unsigned int length_limit));
+
 /* Install a special processing method for COM or APPn markers. */
 EXTERN(void) jpeg_set_marker_processor
 	JPP((j_decompress_ptr cinfo, int marker_code,
@@ -1052,4 +1149,10 @@ struct jpeg_color_quantizer { long dummy; };
 #include "jerror.h"		/* fetch error codes too */
 #endif
 
+#ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
+}
+#endif
+#endif
+
 #endif /* JPEGLIB_H */

jpegtran.1

@@ -1,6 +1,6 @@
-.TH JPEGTRAN 1 "15 June 1995"
+.TH JPEGTRAN 1 "28 December 2009"
 .SH NAME
-jpegtran \- lossless transcoding of JPEG files
+jpegtran \- lossless transformation of JPEG files
 .SH SYNOPSIS
 .B jpegtran
 [
@@ -13,23 +13,27 @@ jpegtran \- lossless transcoding of JPEG files
 .SH DESCRIPTION
 .LP
 .B jpegtran
-translates JPEG files from one variant of JPEG to another, for example
-from baseline JPEG to progressive JPEG.  The transformation is lossless:
-no image degradation occurs, which would not be true if you used
+performs various useful transformations of JPEG files.
+It can translate the coded representation from one variant of JPEG to another,
+for example from baseline JPEG to progressive JPEG or vice versa.  It can also
+perform some rearrangements of the image data, for example turning an image
+from landscape to portrait format by rotation.
+.PP
+.B jpegtran
+works by rearranging the compressed data (DCT coefficients), without
+ever fully decoding the image.  Therefore, its transformations are lossless:
+there is no image degradation at all, which would not be true if you used
 .B djpeg
 followed by
-.BR cjpeg .
-However, you cannot alter the image quality, because that would not be
-a lossless operation.
+.B cjpeg
+to accomplish the same conversion.  But by the same token,
+.B jpegtran
+cannot perform lossy operations such as changing the image quality.
+.PP
 .B jpegtran
 reads the named JPEG/JFIF file, or the standard input if no file is
 named, and produces a JPEG/JFIF file on the standard output.
 .SH OPTIONS
-.B jpegtran
-accepts a subset of the switches recognized by
-.BR cjpeg .
-If you specify no switches, you get a plain baseline JPEG output file.
-.PP
 All switch names may be abbreviated; for example,
 .B \-optimize
 may be written
@@ -41,41 +45,178 @@ British spellings are also accepted (e.g.,
 .BR \-optimise ),
 though for brevity these are not mentioned below.
 .PP
-The basic switches are:
+To specify the coded JPEG representation used in the output file,
+.B jpegtran
+accepts a subset of the switches recognized by
+.BR cjpeg :
 .TP
 .B \-optimize
-Perform optimization of entropy encoding parameters.  Without this, default
-encoding parameters are used.
-.B \-optimize
-usually makes the JPEG file a little smaller, but at the price of slower
-compression.  Note that
-.B \-progressive
-implies
-.BR \-optimize .
+Perform optimization of entropy encoding parameters.
 .TP
 .B \-progressive
-Create progressive JPEG file (see below).
-.PP
-The
-.B \-progressive
-switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
-is stored in multiple scans of increasing quality.  If the file is being
-transmitted over a slow communications link, the decoder can use the first
-scan to display a low-quality image very quickly, and can then improve the
-display with each subsequent scan.  The final image is exactly equivalent to a
-standard JPEG file of the same quality setting, and the total file size is
-about the same --- often a little smaller.
-.B Caution:
-progressive JPEG is not yet widely implemented, so many decoders will be
-unable to view a progressive JPEG file at all.
-.PP
-Switches for advanced users:
+Create progressive JPEG file.
 .TP
 .BI \-restart " N"
 Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
 attached to the number.
-.B \-restart 0
-(the default) means no restart markers.
+.TP
+.B \-arithmetic
+Use arithmetic coding.
+.TP
+.BI \-scans " file"
+Use the scan script given in the specified text file.
+.PP
+See
+.BR cjpeg (1)
+for more details about these switches.
+If you specify none of these switches, you get a plain baseline-JPEG output
+file.  The quality setting and so forth are determined by the input file.
+.PP
+The image can be losslessly transformed by giving one of these switches:
+.TP
+.B \-flip horizontal
+Mirror image horizontally (left-right).
+.TP
+.B \-flip vertical
+Mirror image vertically (top-bottom).
+.TP
+.B \-rotate 90
+Rotate image 90 degrees clockwise.
+.TP
+.B \-rotate 180
+Rotate image 180 degrees.
+.TP
+.B \-rotate 270
+Rotate image 270 degrees clockwise (or 90 ccw).
+.TP
+.B \-transpose
+Transpose image (across UL-to-LR axis).
+.TP
+.B \-transverse
+Transverse transpose (across UR-to-LL axis).
+.IP
+The transpose transformation has no restrictions regarding image dimensions.
+The other transformations operate rather oddly if the image dimensions are not
+a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
+transform complete blocks of DCT coefficient data in the desired way.
+.IP
+.BR jpegtran 's
+default behavior when transforming an odd-size image is designed
+to preserve exact reversibility and mathematical consistency of the
+transformation set.  As stated, transpose is able to flip the entire image
+area.  Horizontal mirroring leaves any partial iMCU column at the right edge
+untouched, but is able to flip all rows of the image.  Similarly, vertical
+mirroring leaves any partial iMCU row at the bottom edge untouched, but is
+able to flip all columns.  The other transforms can be built up as sequences
+of transpose and flip operations; for consistency, their actions on edge
+pixels are defined to be the same as the end result of the corresponding
+transpose-and-flip sequence.
+.IP
+For practical use, you may prefer to discard any untransformable edge pixels
+rather than having a strange-looking strip along the right and/or bottom edges
+of a transformed image.  To do this, add the
+.B \-trim
+switch:
+.TP
+.B \-trim
+Drop non-transformable edge blocks.
+.IP
+Obviously, a transformation with
+.B \-trim
+is not reversible, so strictly speaking
+.B jpegtran
+with this switch is not lossless.  Also, the expected mathematical
+equivalences between the transformations no longer hold.  For example,
+.B \-rot 270 -trim
+trims only the bottom edge, but
+.B \-rot 90 -trim
+followed by
+.B \-rot 180 -trim
+trims both edges.
+.IP
+If you are only interested in perfect transformation, add the
+.B \-perfect
+switch:
+.TP
+.B \-perfect
+Fails with an error if the transformation is not perfect.
+.IP
+For example you may want to do
+.IP
+.B (jpegtran \-rot 90 -perfect
+.I foo.jpg
+.B || djpeg
+.I foo.jpg
+.B | pnmflip \-r90 | cjpeg)
+.IP
+to do a perfect rotation if available or an approximated one if not.
+.PP
+We also offer a lossless-crop option, which discards data outside a given
+image region but losslessly preserves what is inside.  Like the rotate and
+flip transforms, lossless crop is restricted by the current JPEG format: the
+upper left corner of the selected region must fall on an iMCU boundary.  If
+this does not hold for the given crop parameters, we silently move the upper
+left corner up and/or left to make it so, simultaneously increasing the region
+dimensions to keep the lower right crop corner unchanged.  (Thus, the output
+image covers at least the requested region, but may cover more.)
+
+The image can be losslessly cropped by giving the switch:
+.TP
+.B \-crop WxH+X+Y
+Crop to a rectangular subarea of width W, height H starting at point X,Y.
+.PP
+Other not-strictly-lossless transformation switches are:
+.TP
+.B \-grayscale
+Force grayscale output.
+.IP
+This option discards the chrominance channels if the input image is YCbCr
+(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
+luminance channel is preserved exactly, so this is a better method of reducing
+to grayscale than decompression, conversion, and recompression.  This switch
+is particularly handy for fixing a monochrome picture that was mistakenly
+encoded as a color JPEG.  (In such a case, the space savings from getting rid
+of the near-empty chroma channels won't be large; but the decoding time for
+a grayscale JPEG is substantially less than that for a color JPEG.)
+.TP
+.BI \-scale " M/N"
+Scale the output image by a factor M/N.
+.IP
+Currently supported scale factors are M/N with all M from 1 to 16, where N is
+the source DCT size, which is 8 for baseline JPEG.  If the /N part is omitted,
+then M specifies the DCT scaled size to be applied on the given input.  For
+baseline JPEG this is equivalent to M/8 scaling, since the source DCT size
+for baseline JPEG is 8.
+.B Caution:
+An implementation of the JPEG SmartScale extension is required for this
+feature.  SmartScale enabled JPEG is not yet widely implemented, so many
+decoders will be unable to view a SmartScale extended JPEG file at all.
+.PP
+.B jpegtran
+also recognizes these switches that control what to do with "extra" markers,
+such as comment blocks:
+.TP
+.B \-copy none
+Copy no extra markers from source file.  This setting suppresses all
+comments and other excess baggage present in the source file.
+.TP
+.B \-copy comments
+Copy only comment markers.  This setting copies comments from the source file,
+but discards any other inessential (for image display) data.
+.TP
+.B \-copy all
+Copy all extra markers.  This setting preserves miscellaneous markers
+found in the source file, such as JFIF thumbnails, Exif data, and Photoshop
+settings.  In some files these extra markers can be sizable.
+.IP
+The default behavior is
+.BR "\-copy comments" .
+(Note: in IJG releases v6 and v6a,
+.B jpegtran
+always did the equivalent of
+.BR "\-copy none" .)
+.PP
+Additional switches recognized by jpegtran are:
 .TP
 .BI \-maxmemory " N"
 Set limit for amount of memory to use in processing large images.  Value is
@@ -95,26 +236,6 @@ give more output.  Also, version information is printed at startup.
 .B \-debug
 Same as
 .BR \-verbose .
-.PP
-The
-.B \-restart
-option inserts extra markers that allow a JPEG decoder to resynchronize after
-a transmission error.  Without restart markers, any damage to a compressed
-file will usually ruin the image from the point of the error to the end of the
-image; with restart markers, the damage is usually confined to the portion of
-the image up to the next restart marker.  Of course, the restart markers
-occupy extra space.  We recommend
-.B \-restart 1
-for images that will be transmitted across unreliable networks such as Usenet.
-.PP
-Switches for wizards:
-.TP
-.BI \-scans " file"
-Use the scan script given in the specified text file.
-.PP
-The "wizard" switches are intended for experimentation with JPEG.  If you
-don't know what you are doing, \fBdon't use them\fR.  These switches are
-documented further in the file wizard.doc.
 .SH EXAMPLES
 .LP
 This example converts a baseline JPEG file to progressive form:
@@ -123,6 +244,14 @@ This example converts a baseline JPEG file to progressive form:
 .I foo.jpg
 .B >
 .I fooprog.jpg
+.PP
+This example rotates an image 90 degrees clockwise, discarding any
+unrotatable edge pixels:
+.IP
+.B jpegtran \-rot 90 -trim
+.I foo.jpg
+.B >
+.I foo90.jpg
 .SH ENVIRONMENT
 .TP
 .B JPEGMEM
@@ -145,6 +274,12 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
+The transform options can't transform odd-size images perfectly.  Use
+.B \-trim
+or
+.B \-perfect
+if you don't like the results.
 .PP
-Still not as fast as we'd like.
+The entire image is read into memory and then written out again, even in
+cases where this isn't really necessary.  Expect swapping on large images,
+especially when using the more complex transform options.

jpegtran.c

@@ -1,16 +1,18 @@
 /*
  * jpegtran.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-2010, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains a command-line user interface for JPEG transcoding.
- * It is very similar to cjpeg.c, but provides lossless transcoding between
- * different JPEG file formats.
+ * It is very similar to cjpeg.c, and partly to djpeg.c, but provides
+ * lossless transcoding between different JPEG file formats.  It also
+ * provides some lossless and sort-of-lossless transformations of JPEG data.
  */
 
 #include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "transupp.h"		/* Support routines for jpegtran */
 #include "jversion.h"		/* for version message */
 
 #ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
@@ -35,6 +37,9 @@
 
 static const char * progname;	/* program name for error messages */
 static char * outfilename;	/* for -outfile switch */
+static char * scaleoption;	/* -scale switch */
+static JCOPY_OPTION copyoption;	/* -copy switch */
+static jpeg_transform_info transformoption; /* image transformation options */
 
 
 LOCAL(void)
@@ -49,11 +54,28 @@ usage (void)
 #endif
 
   fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -copy none     Copy no extra markers from source file\n");
+  fprintf(stderr, "  -copy comments Copy only comment markers (default)\n");
+  fprintf(stderr, "  -copy all      Copy all extra markers\n");
 #ifdef ENTROPY_OPT_SUPPORTED
   fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
 #endif
 #ifdef C_PROGRESSIVE_SUPPORTED
   fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
+#endif
+  fprintf(stderr, "Switches for modifying the image:\n");
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "  -crop WxH+X+Y  Crop to a rectangular subarea\n");
+  fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
+  fprintf(stderr, "  -flip [horizontal|vertical]  Mirror image (left-right or top-bottom)\n");
+  fprintf(stderr, "  -perfect       Fail if there is non-transformable edge blocks\n");
+  fprintf(stderr, "  -rotate [90|180|270]         Rotate image (degrees clockwise)\n");
+#endif
+  fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "  -transpose     Transpose image\n");
+  fprintf(stderr, "  -transverse    Transverse transpose image\n");
+  fprintf(stderr, "  -trim          Drop non-transformable edge blocks\n");
 #endif
   fprintf(stderr, "Switches for advanced users:\n");
   fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
@@ -71,6 +93,29 @@ usage (void)
 }
 
 
+LOCAL(void)
+select_transform (JXFORM_CODE transform)
+/* Silly little routine to detect multiple transform options,
+ * which we can't handle.
+ */
+{
+#if TRANSFORMS_SUPPORTED
+  if (transformoption.transform == JXFORM_NONE ||
+      transformoption.transform == transform) {
+    transformoption.transform = transform;
+  } else {
+    fprintf(stderr, "%s: can only do one image transformation at a time\n",
+	    progname);
+    usage();
+  }
+#else
+  fprintf(stderr, "%s: sorry, image transformation was not compiled\n",
+	  progname);
+  exit(EXIT_FAILURE);
+#endif
+}
+
+
 LOCAL(int)
 parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 		int last_file_arg_seen, boolean for_real)
@@ -91,6 +136,13 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
   /* Set up default JPEG parameters. */
   simple_progressive = FALSE;
   outfilename = NULL;
+  scaleoption = NULL;
+  copyoption = JCOPYOPT_DEFAULT;
+  transformoption.transform = JXFORM_NONE;
+  transformoption.perfect = FALSE;
+  transformoption.trim = FALSE;
+  transformoption.force_grayscale = FALSE;
+  transformoption.crop = FALSE;
   cinfo->err->trace_level = 0;
 
   /* Scan command line options, adjust parameters */
@@ -117,6 +169,33 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       exit(EXIT_FAILURE);
 #endif
 
+    } else if (keymatch(arg, "copy", 2)) {
+      /* Select which extra markers to copy. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "none", 1)) {
+	copyoption = JCOPYOPT_NONE;
+      } else if (keymatch(argv[argn], "comments", 1)) {
+	copyoption = JCOPYOPT_COMMENTS;
+      } else if (keymatch(argv[argn], "all", 1)) {
+	copyoption = JCOPYOPT_ALL;
+      } else
+	usage();
+
+    } else if (keymatch(arg, "crop", 2)) {
+      /* Perform lossless cropping. */
+#if TRANSFORMS_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+	fprintf(stderr, "%s: bogus -crop argument '%s'\n",
+		progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
     } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
       /* Enable debug printouts. */
       /* On first -d, print version identification */
@@ -129,6 +208,25 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       }
       cinfo->err->trace_level++;
 
+    } else if (keymatch(arg, "flip", 1)) {
+      /* Mirror left-right or top-bottom. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "horizontal", 1))
+	select_transform(JXFORM_FLIP_H);
+      else if (keymatch(argv[argn], "vertical", 1))
+	select_transform(JXFORM_FLIP_V);
+      else
+	usage();
+
+    } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) {
+      /* Force to grayscale. */
+#if TRANSFORMS_SUPPORTED
+      transformoption.force_grayscale = TRUE;
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
     } else if (keymatch(arg, "maxmemory", 3)) {
       /* Maximum memory in Kb (or Mb with 'm'). */
       long lval;
@@ -158,7 +256,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 	usage();
       outfilename = argv[argn];	/* save it away for later use */
 
-    } else if (keymatch(arg, "progressive", 1)) {
+    } else if (keymatch(arg, "perfect", 2)) {
+      /* Fail if there is any partial edge MCUs that the transform can't
+       * handle. */
+      transformoption.perfect = TRUE;
+
+    } else if (keymatch(arg, "progressive", 2)) {
       /* Select simple progressive mode. */
 #ifdef C_PROGRESSIVE_SUPPORTED
       simple_progressive = TRUE;
@@ -188,7 +291,27 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 	/* restart_interval will be computed during startup */
       }
 
-    } else if (keymatch(arg, "scans", 2)) {
+    } else if (keymatch(arg, "rotate", 2)) {
+      /* Rotate 90, 180, or 270 degrees (measured clockwise). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "90", 2))
+	select_transform(JXFORM_ROT_90);
+      else if (keymatch(argv[argn], "180", 3))
+	select_transform(JXFORM_ROT_180);
+      else if (keymatch(argv[argn], "270", 3))
+	select_transform(JXFORM_ROT_270);
+      else
+	usage();
+
+    } else if (keymatch(arg, "scale", 4)) {
+      /* Scale the output image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      scaleoption = argv[argn];
+      /* We must postpone processing until decompression startup. */
+
+    } else if (keymatch(arg, "scans", 1)) {
       /* Set scan script. */
 #ifdef C_MULTISCAN_FILES_SUPPORTED
       if (++argn >= argc)	/* advance to next argument */
@@ -201,6 +324,18 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       exit(EXIT_FAILURE);
 #endif
 
+    } else if (keymatch(arg, "transpose", 1)) {
+      /* Transpose (across UL-to-LR axis). */
+      select_transform(JXFORM_TRANSPOSE);
+
+    } else if (keymatch(arg, "transverse", 6)) {
+      /* Transverse transpose (across UR-to-LL axis). */
+      select_transform(JXFORM_TRANSVERSE);
+
+    } else if (keymatch(arg, "trim", 3)) {
+      /* Trim off any partial edge MCUs that the transform can't handle. */
+      transformoption.trim = TRUE;
+
     } else {
       usage();			/* bogus switch */
     }
@@ -239,10 +374,13 @@ main (int argc, char **argv)
 #ifdef PROGRESS_REPORT
   struct cdjpeg_progress_mgr progress;
 #endif
-  jvirt_barray_ptr * coef_arrays;
+  jvirt_barray_ptr * src_coef_arrays;
+  jvirt_barray_ptr * dst_coef_arrays;
   int file_index;
-  FILE * input_file;
-  FILE * output_file;
+  /* We assume all-in-memory processing and can therefore use only a
+   * single file pointer for sequential input and output operation. 
+   */
+  FILE * fp;
 
   /* On Mac, fetch a command line. */
 #ifdef USE_CCOMMAND
@@ -269,8 +407,10 @@ main (int argc, char **argv)
 
   /* Scan command line to find file names.
    * It is convenient to use just one switch-parsing routine, but the switch
-   * values read here are ignored; we will rescan the switches after opening
-   * the input file.
+   * values read here are mostly ignored; we will rescan the switches after
+   * opening the input file.  Also note that most of the switches affect the
+   * destination JPEG object, so we parse into that and then copy over what
+   * needs to affects the source too.
    */
 
   file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
@@ -303,24 +443,13 @@ main (int argc, char **argv)
 
   /* Open the input file. */
   if (file_index < argc) {
-    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+    if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]);
       exit(EXIT_FAILURE);
     }
   } else {
     /* default input file is stdin */
-    input_file = read_stdin();
-  }
-
-  /* Open the output file. */
-  if (outfilename != NULL) {
-    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default output file is stdout */
-    output_file = write_stdout();
+    fp = read_stdin();
   }
 
 #ifdef PROGRESS_REPORT
@@ -328,27 +457,88 @@ main (int argc, char **argv)
 #endif
 
   /* Specify data source for decompression */
-  jpeg_stdio_src(&srcinfo, input_file);
+  jpeg_stdio_src(&srcinfo, fp);
+
+  /* Enable saving of extra markers that we want to copy */
+  jcopy_markers_setup(&srcinfo, copyoption);
 
   /* Read file header */
   (void) jpeg_read_header(&srcinfo, TRUE);
 
+  /* Adjust default decompression parameters */
+  if (scaleoption != NULL)
+    if (sscanf(scaleoption, "%d/%d",
+	&srcinfo.scale_num, &srcinfo.scale_denom) < 1)
+      usage();
+
+  /* Any space needed by a transform option must be requested before
+   * jpeg_read_coefficients so that memory allocation will be done right.
+   */
+#if TRANSFORMS_SUPPORTED
+  /* Fail right away if -perfect is given and transformation is not perfect.
+   */
+  if (!jtransform_request_workspace(&srcinfo, &transformoption)) {
+    fprintf(stderr, "%s: transformation is not perfect\n", progname);
+    exit(EXIT_FAILURE);
+  }
+#endif
+
   /* Read source file as DCT coefficients */
-  coef_arrays = jpeg_read_coefficients(&srcinfo);
+  src_coef_arrays = jpeg_read_coefficients(&srcinfo);
 
   /* Initialize destination compression parameters from source values */
   jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
 
+  /* Adjust destination parameters if required by transform options;
+   * also find out which set of coefficient arrays will hold the output.
+   */
+#if TRANSFORMS_SUPPORTED
+  dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
+						 src_coef_arrays,
+						 &transformoption);
+#else
+  dst_coef_arrays = src_coef_arrays;
+#endif
+
+  /* Close input file, if we opened it.
+   * Note: we assume that jpeg_read_coefficients consumed all input
+   * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
+   * only consume more while (! cinfo->inputctl->eoi_reached).
+   * We cannot call jpeg_finish_decompress here since we still need the
+   * virtual arrays allocated from the source object for processing.
+   */
+  if (fp != stdin)
+    fclose(fp);
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    fp = write_stdout();
+  }
+
   /* Adjust default compression parameters by re-parsing the options */
   file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
 
   /* Specify data destination for compression */
-  jpeg_stdio_dest(&dstinfo, output_file);
+  jpeg_stdio_dest(&dstinfo, fp);
 
-  /* Start compressor */
-  jpeg_write_coefficients(&dstinfo, coef_arrays);
+  /* Start compressor (note no image data is actually written here) */
+  jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
 
-  /* ought to copy source comments here... */
+  /* Copy to the output file any extra markers that we want to preserve */
+  jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
+
+  /* Execute image transformation, if any */
+#if TRANSFORMS_SUPPORTED
+  jtransform_execute_transformation(&srcinfo, &dstinfo,
+				    src_coef_arrays,
+				    &transformoption);
+#endif
 
   /* Finish compression and release memory */
   jpeg_finish_compress(&dstinfo);
@@ -356,11 +546,9 @@ main (int argc, char **argv)
   (void) jpeg_finish_decompress(&srcinfo);
   jpeg_destroy_decompress(&srcinfo);
 
-  /* Close files, if we opened them */
-  if (input_file != stdin)
-    fclose(input_file);
-  if (output_file != stdout)
-    fclose(output_file);
+  /* Close output file, if we opened it */
+  if (fp != stdout)
+    fclose(fp);
 
 #ifdef PROGRESS_REPORT
   end_progress_monitor((j_common_ptr) &dstinfo);

jutils.c

@@ -2,6 +2,7 @@
  * jutils.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -63,6 +64,57 @@ const int jpeg_natural_order[DCTSIZE2+16] = {
  63, 63, 63, 63, 63, 63, 63, 63
 };
 
+const int jpeg_natural_order7[7*7+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 32, 25, 18, 11,  4,  5,
+ 12, 19, 26, 33, 40, 48, 41, 34,
+ 27, 20, 13,  6, 14, 21, 28, 35,
+ 42, 49, 50, 43, 36, 29, 22, 30,
+ 37, 44, 51, 52, 45, 38, 46, 53,
+ 54,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order6[6*6+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 32, 25, 18, 11,  4,  5,
+ 12, 19, 26, 33, 40, 41, 34, 27,
+ 20, 13, 21, 28, 35, 42, 43, 36,
+ 29, 37, 44, 45,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order5[5*5+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 32, 25, 18, 11,  4, 12,
+ 19, 26, 33, 34, 27, 20, 28, 35,
+ 36,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order4[4*4+16] = {
+  0,  1,  8, 16,  9,  2,  3, 10,
+ 17, 24, 25, 18, 11, 19, 26, 27,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order3[3*3+16] = {
+  0,  1,  8, 16,  9,  2, 10, 17,
+ 18,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
+const int jpeg_natural_order2[2*2+16] = {
+  0,  1,  8,  9,
+ 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */
+ 63, 63, 63, 63, 63, 63, 63, 63
+};
+
 
 /*
  * Arithmetic utilities

jversion.h

@@ -1,7 +1,7 @@
 /*
  * jversion.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-2010, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -9,6 +9,6 @@
  */
 
 
-#define JVERSION	"6a  7-Feb-96"
+#define JVERSION	"8a  28-Feb-2010"
 
-#define JCOPYRIGHT	"Copyright (C) 1996, Thomas G. Lane"
+#define JCOPYRIGHT	"Copyright (C) 2010, Thomas G. Lane, Guido Vollbeding"

libjpeg.map

@@ -0,0 +1,4 @@
+LIBJPEG_8.0 {
+  global:
+    *;
+};

libjpeg.txt

@@ -1,6 +1,6 @@
 USING THE IJG JPEG LIBRARY
 
-Copyright (C) 1994-1996, Thomas G. Lane.
+Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -47,6 +47,7 @@ Advanced features:
 	Really raw data: DCT coefficients
 	Progress monitoring
 	Memory management
+	Memory usage
 	Library compile-time options
 	Portability considerations
 	Notes for MS-DOS implementors
@@ -92,7 +93,6 @@ JPEG processes are supported.  (Our subset includes all features now in common
 use.)  Unsupported ISO options include:
 	* Hierarchical storage
 	* Lossless JPEG
-	* Arithmetic entropy coding (unsupported for legal reasons)
 	* DNL marker
 	* Nonintegral subsampling ratios
 We support both 8- and 12-bit data precision, but this is a compile-time
@@ -437,7 +437,7 @@ Typical code:
 	jpeg_finish_compress(&cinfo);
 
 If using the stdio destination manager, don't forget to close the output
-stdio stream if necessary.
+stdio stream (if necessary) afterwards.
 
 If you have requested a multi-pass operating mode, such as Huffman code
 optimization, jpeg_finish_compress() will perform the additional passes using
@@ -463,12 +463,13 @@ you'll need to repeat all of step 3.
 7. Release the JPEG compression object.
 
 When you are done with a JPEG compression object, destroy it by calling
-jpeg_destroy_compress().  This will free all subsidiary memory.  Or you can
-call jpeg_destroy() which works for either compression or decompression
-objects --- this may be more convenient if you are sharing code between
-compression and decompression cases.  (Actually, these routines are equivalent
-except for the declared type of the passed pointer.  To avoid gripes from
-ANSI C compilers, jpeg_destroy() should be passed a j_common_ptr.)
+jpeg_destroy_compress().  This will free all subsidiary memory (regardless of
+the previous state of the object).  Or you can call jpeg_destroy(), which
+works for either compression or decompression objects --- this may be more
+convenient if you are sharing code between compression and decompression
+cases.  (Actually, these routines are equivalent except for the declared type
+of the passed pointer.  To avoid gripes from ANSI C compilers, jpeg_destroy()
+should be passed a j_common_ptr.)
 
 If you allocated the jpeg_compress_struct structure from malloc(), freeing
 it is your responsibility --- jpeg_destroy() won't.  Ditto for the error
@@ -489,13 +490,19 @@ in either of two ways:
   legitimate at any point after calling jpeg_create_compress() --- in fact,
   it's safe even if jpeg_create_compress() fails.
 
-* If you want to re-use the JPEG object, call jpeg_abort_compress(), or
+* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call
   jpeg_abort() which works on both compression and decompression objects.
   This will return the object to an idle state, releasing any working memory.
   jpeg_abort() is allowed at any time after successful object creation.
 
 Note that cleaning up the data destination, if required, is your
-responsibility.
+responsibility; neither of these routines will call term_destination().
+(See "Compressed data handling", below, for more about that.)
+
+jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG
+object that has reported an error by calling error_exit (see "Error handling"
+for more info).  The internal state of such an object is likely to be out of
+whack.  Either of these two routines will return the object to a known state.
 
 
 Decompression details
@@ -673,10 +680,10 @@ jpeg_read_scanlines() reads at least one scanline per call, until the
 bottom of the image has been reached.
 
 If you use a buffer larger than one scanline, it is NOT safe to assume that
-jpeg_read_scanlines() fills it.  (The current implementation won't return
-more than cinfo.rec_outbuf_height scanlines per call, no matter how large
-a buffer you pass.)  So you must always provide a loop that calls
-jpeg_read_scanlines() repeatedly until the whole image has been read.
+jpeg_read_scanlines() fills it.  (The current implementation returns only a
+few scanlines per call, no matter how large a buffer you pass.)  So you must
+always provide a loop that calls jpeg_read_scanlines() repeatedly until the
+whole image has been read.
 
 
 7. jpeg_finish_decompress(...);
@@ -693,7 +700,7 @@ If using the stdio source manager, don't forget to close the source stdio
 stream if necessary.
 
 It is an error to call jpeg_finish_decompress() before reading the correct
-total number of scanlines.  If you wish to abort compression, call
+total number of scanlines.  If you wish to abort decompression, call
 jpeg_abort() as discussed below.
 
 After completing a decompression cycle, you may dispose of the JPEG object as
@@ -742,7 +749,18 @@ is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix
 machines) and reference it at your link step.  If you use only half of the
 library (only compression or only decompression), only that much code will be
 included from the library, unless your linker is hopelessly brain-damaged.
-The supplied makefiles build libjpeg.a automatically (see install.doc).
+The supplied makefiles build libjpeg.a automatically (see install.txt).
+
+While you can build the JPEG library as a shared library if the whim strikes
+you, we don't really recommend it.  The trouble with shared libraries is that
+at some point you'll probably try to substitute a new version of the library
+without recompiling the calling applications.  That generally doesn't work
+because the parameter struct declarations usually change with each new
+version.  In other words, the library's API is *not* guaranteed binary
+compatible across versions; we only try to ensure source-code compatibility.
+(In hindsight, it might have been smarter to hide the parameter structs from
+applications and introduce a ton of access functions instead.  Too late now,
+however.)
 
 On some systems your application may need to set up a signal handler to ensure
 that temporary files are deleted if the program is interrupted.  This is most
@@ -831,6 +849,10 @@ int jpeg_quality_scaling (int quality)
 	can't be expressed as a simple scalar multiplier, in which case the
 	premise of this routine collapses.  Caveat user.
 
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+	Set default quantization tables with linear q_scale_factor[] values
+	(see below).
+
 jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
 		      const unsigned int *basic_table,
 		      int scale_factor, boolean force_baseline)
@@ -870,6 +892,12 @@ J_DCT_METHOD dct_method
 	recommended if high quality is a concern.  JDCT_DEFAULT and
 	JDCT_FASTEST are macros configurable by each installation.
 
+unsigned int scale_num, scale_denom
+	Scale the image by the fraction scale_num/scale_denom.  Default is
+	1/1, or no scaling.  Currently, the supported scaling ratios are
+	8/N with all N from 1 to 16.  (The library design allows for arbitrary
+	scaling ratios but this is not likely to be implemented any time soon.)
+
 J_COLOR_SPACE jpeg_color_space
 int num_components
 	The JPEG color space and corresponding number of components; see
@@ -893,6 +921,11 @@ int restart_in_rows
 	Set restart_in_rows to specify the interval in MCU rows.  (If
 	restart_in_rows is not 0, then restart_interval is set after the
 	image width in MCUs is computed.)  Defaults are zero (no restarts).
+	One restart marker per MCU row is often a good choice.
+	NOTE: the overhead of restart markers is higher in grayscale JPEG
+	files than in color files, and MUCH higher in progressive JPEGs.
+	If you use restarts, you may want to use larger intervals in those
+	cases.
 
 const jpeg_scan_info * scan_info
 int num_scans
@@ -906,6 +939,15 @@ int num_scans
 	a suitable scan definition array for progressive JPEG.)  This is
 	discussed further under "Progressive JPEG support".
 
+boolean do_fancy_downsampling
+	If TRUE, use direct DCT scaling with DCT size > 8 for downsampling
+	of chroma components.
+	If FALSE, use only DCT size <= 8 and simple separate downsampling.
+	Default is TRUE.
+	For better image stability in multiple generation compression cycles
+	it is preferable that this value matches the corresponding
+	do_fancy_upsampling value in decompression.
+
 int smoothing_factor
 	If non-zero, the input image is smoothed; the value should be 1 for
 	minimal smoothing to 100 for maximum smoothing.  Consult jcsample.c
@@ -916,6 +958,13 @@ boolean write_JFIF_header
 	jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space
 	(ie, YCbCr or grayscale) is selected, otherwise FALSE.
 
+UINT8 JFIF_major_version
+UINT8 JFIF_minor_version
+	The version number to be written into the JFIF marker.
+	jpeg_set_defaults() initializes the version to 1.01 (major=minor=1).
+	You should set it to 1.02 (major=1, minor=2) if you plan to write
+	any JFIF 1.02 extension markers.
+
 UINT8 density_unit
 UINT16 X_density
 UINT16 Y_density
@@ -941,6 +990,30 @@ JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]
 	routines will set up table slot 0 for luminance quality and table
 	slot 1 for chrominance.
 
+int q_scale_factor[NUM_QUANT_TBLS]
+	Linear quantization scaling factors (percentage, initialized 100)
+	for use with jpeg_default_qtables().
+	See rdswitch.c and cjpeg.c for an example of usage.
+	Note that the q_scale_factor[] fields are the "linear" scales, so you
+	have to convert from user-defined ratings via jpeg_quality_scaling().
+	Here is an example code which corresponds to cjpeg -quality 90,70:
+
+		jpeg_set_defaults(cinfo);
+
+		/* Set luminance quality 90. */
+		cinfo->q_scale_factor[0] = jpeg_quality_scaling(90);
+		/* Set chrominance quality 70. */
+		cinfo->q_scale_factor[1] = jpeg_quality_scaling(70);
+
+		jpeg_default_qtables(cinfo, force_baseline);
+
+	CAUTION: You must also set 1x1 subsampling for efficient separate
+	color quality selection, since the default value used by library
+	is 2x2:
+
+		cinfo->comp_info[0].v_samp_factor = 1;
+		cinfo->comp_info[0].h_samp_factor = 1;
+
 JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]
 JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]
 	Pointers to Huffman coding tables, one per table slot, or NULL if
@@ -951,9 +1024,16 @@ JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]
 	by setting optimize_coding, as discussed above; there's seldom
 	any need to mess with providing your own Huffman tables.
 
-There are some additional cinfo fields which are not documented here
-because you currently can't change them; for example, you can't set
-arith_code TRUE because arithmetic coding is unsupported.
+
+The actual dimensions of the JPEG image that will be written to the file are
+given by the following fields.  These are computed from the input image
+dimensions and the compression parameters by jpeg_start_compress().  You can
+also call jpeg_calc_jpeg_dimensions() to obtain the values that will result
+from the current parameter settings.  This can be useful if you are trying
+to pick a scaling ratio that will get close to a desired target size.
+
+JDIMENSION jpeg_width		Actual dimensions of output image.
+JDIMENSION jpeg_height
 
 
 Per-component parameters are stored in the struct cinfo.comp_info[i] for
@@ -1013,6 +1093,8 @@ JDIMENSION image_height
 int num_components			Number of color components
 J_COLOR_SPACE jpeg_color_space		Colorspace of image
 boolean saw_JFIF_marker			TRUE if a JFIF APP0 marker was seen
+  UINT8 JFIF_major_version		Version information from JFIF marker
+  UINT8 JFIF_minor_version
   UINT8 density_unit			Resolution data from JFIF marker
   UINT16 X_density
   UINT16 Y_density
@@ -1040,10 +1122,16 @@ J_COLOR_SPACE out_color_space
 	unusual conversion.
 
 unsigned int scale_num, scale_denom
-	Scale the image by the fraction scale_num/scale_denom.  Default is
-	1/1, or no scaling.  Currently, the only supported scaling ratios
-	are 1/1, 1/2, 1/4, and 1/8.  (The library design allows for arbitrary
-	scaling ratios but this is not likely to be implemented any time soon.)
+	Scale the image by the fraction scale_num/scale_denom.  Currently,
+	the supported scaling ratios are M/N with all M from 1 to 16, where
+	N is the source DCT size, which is 8 for baseline JPEG.  (The library
+	design allows for arbitrary scaling ratios but this is not likely
+	to be implemented any time soon.)  The values are initialized by
+	jpeg_read_header() with the source DCT size.  For baseline JPEG
+	this is 8/8.  If you change only the scale_num value while leaving
+	the other unchanged, then this specifies the DCT scaled size to be
+	applied on the given input.  For baseline JPEG this is equivalent
+	to M/8 scaling, since the source DCT size for baseline JPEG is 8.
 	Smaller scaling ratios permit significantly faster decoding since
 	fewer pixels need be processed and a simpler IDCT method can be used.
 
@@ -1099,9 +1187,13 @@ J_DCT_METHOD dct_method
 	as described above for compression.
 
 boolean do_fancy_upsampling
-	If TRUE, do careful upsampling of chroma components.  If FALSE,
-	a faster but sloppier method is used.  Default is TRUE.  The visual
-	impact of the sloppier method is often very small.
+	If TRUE, use direct DCT scaling with DCT size > 8 for upsampling
+	of chroma components.
+	If FALSE, use only DCT size <= 8 and simple separate upsampling.
+	Default is TRUE.
+	For better image stability in multiple generation compression cycles
+	it is preferable that this value matches the corresponding
+	do_fancy_downsampling value in compression.
 
 boolean do_block_smoothing
 	If TRUE, interblock smoothing is applied in early stages of decoding
@@ -1144,6 +1236,8 @@ copying.  In high-quality modes, rec_outbuf_height is always 1, but some
 faster, lower-quality modes set it to larger values (typically 2 to 4).
 If you are going to ask for a high-speed processing mode, you may as well
 go to the trouble of honoring rec_outbuf_height so as to avoid data copying.
+(An output buffer larger than rec_outbuf_height lines is OK, but won't
+provide any material speed improvement over that height.)
 
 
 Special color spaces
@@ -1204,8 +1298,11 @@ set out_color_space to override this.  Again, you must select a supported
 transformation.  jdcolor.c currently supports
 	YCbCr => GRAYSCALE
 	YCbCr => RGB
+	GRAYSCALE => RGB
 	YCCK => CMYK
-as well as the null transforms.
+as well as the null transforms.  (Since GRAYSCALE=>RGB is provided, an
+application can force grayscale JPEGs to look like color JPEGs if it only
+wants to handle one case.)
 
 The two-pass color quantizer, jquant2.c, is specialized to handle RGB data
 (it weights distances appropriately for RGB colors).  You'll need to modify
@@ -1264,7 +1361,10 @@ additional data which is not known to the JPEG library or the standard error
 handler.  The most convenient way to do this is to embed either the JPEG
 object or the jpeg_error_mgr struct in a larger structure that contains
 additional fields; then casting the passed pointer provides access to the
-additional fields.  Again, see example.c for one way to do it.
+additional fields.  Again, see example.c for one way to do it.  (Beginning
+with IJG version 6b, there is also a void pointer "client_data" in each
+JPEG object, which the application can also use to find related data.
+The library does not touch client_data at all.)
 
 The individual methods that you might wish to override are:
 
@@ -1333,21 +1433,22 @@ Compressed data handling (source and destination managers)
 
 The JPEG compression library sends its compressed data to a "destination
 manager" module.  The default destination manager just writes the data to a
-stdio stream, but you can provide your own manager to do something else.
-Similarly, the decompression library calls a "source manager" to obtain the
-compressed data; you can provide your own source manager if you want the data
-to come from somewhere other than a stdio stream.
+memory buffer or to a stdio stream, but you can provide your own manager to
+do something else.  Similarly, the decompression library calls a "source
+manager" to obtain the compressed data; you can provide your own source
+manager if you want the data to come from somewhere other than a memory
+buffer or a stdio stream.
 
 In both cases, compressed data is processed a bufferload at a time: the
 destination or source manager provides a work buffer, and the library invokes
 the manager only when the buffer is filled or emptied.  (You could define a
 one-character buffer to force the manager to be invoked for each byte, but
 that would be rather inefficient.)  The buffer's size and location are
-controlled by the manager, not by the library.  For example, if you desired to
-decompress a JPEG datastream that was all in memory, you could just make the
-buffer pointer and length point to the original data in memory.  Then the
-buffer-reload procedure would be invoked only if the decompressor ran off the
-end of the datastream, which would indicate an erroneous datastream.
+controlled by the manager, not by the library.  For example, the memory
+source manager just makes the buffer pointer and length point to the original
+data in memory.  In this case the buffer-reload procedure will be invoked
+only if the decompressor ran off the end of the datastream, which would
+indicate an erroneous datastream.
 
 The work buffer is defined as an array of datatype JOCTET, which is generally
 "char" or "unsigned char".  On a machine where char is not exactly 8 bits
@@ -1399,7 +1500,8 @@ You will also need code to create a jpeg_destination_mgr struct, fill in its
 method pointers, and insert a pointer to the struct into the "dest" field of
 the JPEG compression object.  This can be done in-line in your setup code if
 you like, but it's probably cleaner to provide a separate routine similar to
-the jpeg_stdio_dest() routine of the supplied destination manager.
+the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination
+managers.
 
 Decompression source managers follow a parallel design, but with some
 additional frammishes.  The source manager struct contains a pointer and count
@@ -1475,10 +1577,10 @@ You will also need code to create a jpeg_source_mgr struct, fill in its method
 pointers, and insert a pointer to the struct into the "src" field of the JPEG
 decompression object.  This can be done in-line in your setup code if you
 like, but it's probably cleaner to provide a separate routine similar to the
-jpeg_stdio_src() routine of the supplied source manager.
+jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers.
 
-For more information, consult the stdio source and destination managers
-in jdatasrc.c and jdatadst.c.
+For more information, consult the memory and stdio source and destination
+managers in jdatasrc.c and jdatadst.c.
 
 
 I/O suspension
@@ -1603,19 +1705,27 @@ fill_input_buffer() knows that no more data is available, it can set the
 pointer/count to point to a dummy EOI marker and then return TRUE just as
 though it had read more data in a non-suspending situation.
 
-The decompressor does not attempt to suspend within any JPEG marker; it will
-backtrack to the start of the marker.  Hence the input buffer must be large
-enough to hold the longest marker in the file.  We recommend at least a 2K
-buffer.  The buffer would need to be 64K to allow for arbitrary COM or APPn
-markers, but the decompressor does not actually try to read these; it just
-skips them by calling skip_input_data().  If you provide a special marker
-handling routine that does look at such markers, coping with buffer overflow
-is your problem.  Ordinary JPEG markers should normally not exceed a few
-hundred bytes each (DHT tables are typically the longest).  For robustness
-against damaged marker length counts, you may wish to insert a test in your
-application for the case that the input buffer is completely full and yet the
-decoder has suspended without consuming any data --- otherwise, if this
-situation did occur, it would lead to an endless loop.
+The decompressor does not attempt to suspend within standard JPEG markers;
+instead it will backtrack to the start of the marker and reprocess the whole
+marker next time.  Hence the input buffer must be large enough to hold the
+longest standard marker in the file.  Standard JPEG markers should normally
+not exceed a few hundred bytes each (DHT tables are typically the longest).
+We recommend at least a 2K buffer for performance reasons, which is much
+larger than any correct marker is likely to be.  For robustness against
+damaged marker length counts, you may wish to insert a test in your
+application for the case that the input buffer is completely full and yet
+the decoder has suspended without consuming any data --- otherwise, if this
+situation did occur, it would lead to an endless loop.  (The library can't
+provide this test since it has no idea whether "the buffer is full", or
+even whether there is a fixed-size input buffer.)
+
+The input buffer would need to be 64K to allow for arbitrary COM or APPn
+markers, but these are handled specially: they are either saved into allocated
+memory, or skipped over by calling skip_input_data().  In the former case,
+suspension is handled correctly, and in the latter case, the problem of
+buffer overrun is placed on skip_input_data's shoulders, as explained above.
+Note that if you provide your own marker handling routine for large markers,
+you should consider how to deal with buffer overflow.
 
 Multiple-buffer management:
 
@@ -2186,11 +2296,42 @@ for an example of copying quantization tables.
 To read abbreviated image files, you simply need to load the proper tables
 into the decompression object before trying to read the abbreviated image.
 If the proper tables are stored in the application program, you can just
-allocate the table structs and fill in their contents directly.  More commonly
-you'd want to read the tables from a tables-only file.  The jpeg_read_header()
-call is sufficient to read a tables-only file.  You must pass a second
-parameter of FALSE to indicate that you do not require an image to be present.
-Thus, the typical scenario is
+allocate the table structs and fill in their contents directly.  For example,
+to load a fixed quantization table into table slot "n":
+
+    if (cinfo.quant_tbl_ptrs[n] == NULL)
+      cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo);
+    quant_ptr = cinfo.quant_tbl_ptrs[n];	/* quant_ptr is JQUANT_TBL* */
+    for (i = 0; i < 64; i++) {
+      /* Qtable[] is desired quantization table, in natural array order */
+      quant_ptr->quantval[i] = Qtable[i];
+    }
+
+Code to load a fixed Huffman table is typically (for AC table "n"):
+
+    if (cinfo.ac_huff_tbl_ptrs[n] == NULL)
+      cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo);
+    huff_ptr = cinfo.ac_huff_tbl_ptrs[n];	/* huff_ptr is JHUFF_TBL* */
+    for (i = 1; i <= 16; i++) {
+      /* counts[i] is number of Huffman codes of length i bits, i=1..16 */
+      huff_ptr->bits[i] = counts[i];
+    }
+    for (i = 0; i < 256; i++) {
+      /* symbols[] is the list of Huffman symbols, in code-length order */
+      huff_ptr->huffval[i] = symbols[i];
+    }
+
+(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a
+constant JQUANT_TBL object is not safe.  If the incoming file happened to
+contain a quantization table definition, your master table would get
+overwritten!  Instead allocate a working table copy and copy the master table
+into it, as illustrated above.  Ditto for Huffman tables, of course.)
+
+You might want to read the tables from a tables-only file, rather than
+hard-wiring them into your application.  The jpeg_read_header() call is
+sufficient to read a tables-only file.  You must pass a second parameter of
+FALSE to indicate that you do not require an image to be present.  Thus, the
+typical scenario is
 
 	create JPEG decompression object
 	set source to tables-only file
@@ -2264,6 +2405,7 @@ the selected colorspace is RGB, CMYK, or YCCK.  You can disable this, but
 we don't recommend it.  The decompression library will recognize JFIF and
 Adobe markers and will set the JPEG colorspace properly when one is found.
 
+
 You can write special markers immediately following the datastream header by
 calling jpeg_write_marker() after jpeg_start_compress() and before the first
 call to jpeg_write_scanlines().  When you do this, the markers appear after
@@ -2273,18 +2415,96 @@ all else.  Specify the marker type parameter as "JPEG_COM" for COM or
 any marker type, but we don't recommend writing any other kinds of marker.)
 For example, to write a user comment string pointed to by comment_text:
 	jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text));
-Or if you prefer to synthesize the marker byte sequence yourself, you can
-just cram it straight into the data destination module.
 
-For decompression, you can supply your own routine to process COM or APPn
-markers by calling jpeg_set_marker_processor().  Usually you'd call this
-after creating a decompression object and before calling jpeg_read_header(),
-because the markers of interest will normally be scanned by jpeg_read_header.
-Once you've supplied a routine, it will be used for the life of that
-decompression object.  A separate routine may be registered for COM and for
-each APPn marker code.
+If it's not convenient to store all the marker data in memory at once,
+you can instead call jpeg_write_m_header() followed by multiple calls to
+jpeg_write_m_byte().  If you do it this way, it's your responsibility to
+call jpeg_write_m_byte() exactly the number of times given in the length
+parameter to jpeg_write_m_header().  (This method lets you empty the
+output buffer partway through a marker, which might be important when
+using a suspending data destination module.  In any case, if you are using
+a suspending destination, you should flush its buffer after inserting
+any special markers.  See "I/O suspension".)
 
-A marker processor routine must have the signature
+Or, if you prefer to synthesize the marker byte sequence yourself,
+you can just cram it straight into the data destination module.
+
+If you are writing JFIF 1.02 extension markers (thumbnail images), don't
+forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the
+correct JFIF version number in the JFIF header marker.  The library's default
+is to write version 1.01, but that's wrong if you insert any 1.02 extension
+markers.  (We could probably get away with just defaulting to 1.02, but there
+used to be broken decoders that would complain about unknown minor version
+numbers.  To reduce compatibility risks it's safest not to write 1.02 unless
+you are actually using 1.02 extensions.)
+
+
+When reading, two methods of handling special markers are available:
+1. You can ask the library to save the contents of COM and/or APPn markers
+into memory, and then examine them at your leisure afterwards.
+2. You can supply your own routine to process COM and/or APPn markers
+on-the-fly as they are read.
+The first method is simpler to use, especially if you are using a suspending
+data source; writing a marker processor that copes with input suspension is
+not easy (consider what happens if the marker is longer than your available
+input buffer).  However, the second method conserves memory since the marker
+data need not be kept around after it's been processed.
+
+For either method, you'd normally set up marker handling after creating a
+decompression object and before calling jpeg_read_header(), because the
+markers of interest will typically be near the head of the file and so will
+be scanned by jpeg_read_header.  Once you've established a marker handling
+method, it will be used for the life of that decompression object
+(potentially many datastreams), unless you change it.  Marker handling is
+determined separately for COM markers and for each APPn marker code.
+
+
+To save the contents of special markers in memory, call
+	jpeg_save_markers(cinfo, marker_code, length_limit)
+where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n.
+(To arrange to save all the special marker types, you need to call this
+routine 17 times, for COM and APP0-APP15.)  If the incoming marker is longer
+than length_limit data bytes, only length_limit bytes will be saved; this
+parameter allows you to avoid chewing up memory when you only need to see the
+first few bytes of a potentially large marker.  If you want to save all the
+data, set length_limit to 0xFFFF; that is enough since marker lengths are only
+16 bits.  As a special case, setting length_limit to 0 prevents that marker
+type from being saved at all.  (That is the default behavior, in fact.)
+
+After jpeg_read_header() completes, you can examine the special markers by
+following the cinfo->marker_list pointer chain.  All the special markers in
+the file appear in this list, in order of their occurrence in the file (but
+omitting any markers of types you didn't ask for).  Both the original data
+length and the saved data length are recorded for each list entry; the latter
+will not exceed length_limit for the particular marker type.  Note that these
+lengths exclude the marker length word, whereas the stored representation
+within the JPEG file includes it.  (Hence the maximum data length is really
+only 65533.)
+
+It is possible that additional special markers appear in the file beyond the
+SOS marker at which jpeg_read_header stops; if so, the marker list will be
+extended during reading of the rest of the file.  This is not expected to be
+common, however.  If you are short on memory you may want to reset the length
+limit to zero for all marker types after finishing jpeg_read_header, to
+ensure that the max_memory_to_use setting cannot be exceeded due to addition
+of later markers.
+
+The marker list remains stored until you call jpeg_finish_decompress or
+jpeg_abort, at which point the memory is freed and the list is set to empty.
+(jpeg_destroy also releases the storage, of course.)
+
+Note that the library is internally interested in APP0 and APP14 markers;
+if you try to set a small nonzero length limit on these types, the library
+will silently force the length up to the minimum it wants.  (But you can set
+a zero length limit to prevent them from being saved at all.)  Also, in a
+16-bit environment, the maximum length limit may be constrained to less than
+65533 by malloc() limitations.  It is therefore best not to assume that the
+effective length limit is exactly what you set it to be.
+
+
+If you want to supply your own marker-reading routine, you do it by calling
+jpeg_set_marker_processor().  A marker processor routine must have the
+signature
 	boolean jpeg_marker_parser_method (j_decompress_ptr cinfo)
 Although the marker code is not explicitly passed, the routine can find it
 in cinfo->unread_marker.  At the time of call, the marker proper has been
@@ -2298,9 +2518,16 @@ use a suspending data source.)
 If you override the default APP0 or APP14 processors, it is up to you to
 recognize JFIF and Adobe markers if you want colorspace recognition to occur
 properly.  We recommend copying and extending the default processors if you
-want to do that.
+want to do that.  (A better idea is to save these marker types for later
+examination by calling jpeg_save_markers(); that method doesn't interfere
+with the library's own processing of these markers.)
+
+jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive
+--- if you call one it overrides any previous call to the other, for the
+particular marker type specified.
 
 A simple example of an external COM processor can be found in djpeg.c.
+Also, see jpegtran.c for an example of using jpeg_save_markers.
 
 
 Raw (downsampled) image data
@@ -2341,6 +2568,8 @@ jpeg_write_scanlines().  Before calling jpeg_start_compress(), you must do
 the following:
   * Set cinfo->raw_data_in to TRUE.  (It is set FALSE by jpeg_set_defaults().)
     This notifies the library that you will be supplying raw data.
+    Furthermore, set cinfo->do_fancy_downsampling to FALSE if you want to use
+    real downsampled data.  (It is set TRUE by jpeg_set_defaults().)
   * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace()
     call is a good idea.  Note that since color conversion is bypassed,
     in_color_space is ignored, except that jpeg_set_defaults() uses it to
@@ -2399,16 +2628,17 @@ destination module suspends, jpeg_write_raw_data() will return 0.
 In this case the same data rows must be passed again on the next call.
 
 
-Decompression with raw data output implies bypassing all postprocessing:
-you cannot ask for rescaling or color quantization, for instance.  More
-seriously, you must deal with the color space and sampling factors present in
-the incoming file.  If your application only handles, say, 2h1v YCbCr data,
+Decompression with raw data output implies bypassing all postprocessing.
+You must deal with the color space and sampling factors present in the
+incoming file.  If your application only handles, say, 2h1v YCbCr data,
 you must check for and fail on other color spaces or other sampling factors.
 The library will not convert to a different color space for you.
 
 To obtain raw data output, set cinfo->raw_data_out = TRUE before
 jpeg_start_decompress() (it is set FALSE by jpeg_read_header()).  Be sure to
 verify that the color space and sampling factors are ones you can handle.
+Furthermore, set cinfo->do_fancy_upsampling = FALSE if you want to get real
+downsampled data (it is set TRUE by jpeg_read_header()).
 Then call jpeg_read_raw_data() in place of jpeg_read_scanlines().  The
 decompression process is otherwise the same as usual.
 
@@ -2442,10 +2672,19 @@ entire image into a set of virtual coefficient-block arrays, one array per
 component.  The return value is a pointer to an array of virtual-array
 descriptors.  Each virtual array can be accessed directly using the JPEG
 memory manager's access_virt_barray method (see Memory management, below,
-and also read structure.doc's discussion of virtual array handling).  Or,
+and also read structure.txt's discussion of virtual array handling).  Or,
 for simple transcoding to a different JPEG file format, the array list can
 just be handed directly to jpeg_write_coefficients().
 
+Each block in the block arrays contains quantized coefficient values in
+normal array order (not JPEG zigzag order).  The block arrays contain only
+DCT blocks containing real data; any entirely-dummy blocks added to fill out
+interleaved MCUs at the right or bottom edges of the image are discarded
+during reading and are not stored in the block arrays.  (The size of each
+block array can be determined from the width_in_blocks and height_in_blocks
+fields of the component's comp_info entry.)  This is also the data format
+expected by jpeg_write_coefficients().
+
 When you are done using the virtual arrays, call jpeg_finish_decompress()
 to release the array storage and return the decompression object to an idle
 state; or just call jpeg_destroy() if you don't need to reuse the object.
@@ -2455,14 +2694,14 @@ NULL if it is forced to suspend; a non-NULL return value indicates successful
 completion.  You need not test for a NULL return value when using a
 non-suspending data source.
 
-Each block in the block arrays contains quantized coefficient values in
-normal array order (not JPEG zigzag order).  The block arrays contain only
-DCT blocks containing real data; any entirely-dummy blocks added to fill out
-interleaved MCUs at the right or bottom edges of the image are discarded
-during reading and are not stored in the block arrays.  (The size of each
-block array can be determined from the width_in_blocks and height_in_blocks
-fields of the component's comp_info entry.)  This is also the data format
-expected by jpeg_write_coefficients().
+It is also possible to call jpeg_read_coefficients() to obtain access to the
+decoder's coefficient arrays during a normal decode cycle in buffered-image
+mode.  This frammish might be useful for progressively displaying an incoming
+image and then re-encoding it without loss.  To do this, decode in buffered-
+image mode as discussed previously, then call jpeg_read_coefficients() after
+the last jpeg_finish_output() call.  The arrays will be available for your use
+until you call jpeg_finish_decompress().
+
 
 To write the contents of a JPEG file as DCT coefficients, you must provide
 the DCT coefficients stored in virtual block arrays.  You can either pass
@@ -2577,7 +2816,7 @@ Memory management
 -----------------
 
 This section covers some key facts about the JPEG library's built-in memory
-manager.  For more info, please read structure.doc's section about the memory
+manager.  For more info, please read structure.txt's section about the memory
 manager, and consult the source code if necessary.
 
 All memory and temporary file allocation within the library is done via the
@@ -2635,18 +2874,64 @@ since the C library is supposed to take care of deleting files made with
 tmpfile().
 
 
+Memory usage
+------------
+
+Working memory requirements while performing compression or decompression
+depend on image dimensions, image characteristics (such as colorspace and
+JPEG process), and operating mode (application-selected options).
+
+As of v6b, the decompressor requires:
+ 1. About 24K in more-or-less-fixed-size data.  This varies a bit depending
+    on operating mode and image characteristics (particularly color vs.
+    grayscale), but it doesn't depend on image dimensions.
+ 2. Strip buffers (of size proportional to the image width) for IDCT and
+    upsampling results.  The worst case for commonly used sampling factors
+    is about 34 bytes * width in pixels for a color image.  A grayscale image
+    only needs about 8 bytes per pixel column.
+ 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG
+    file (including progressive JPEGs), or whenever you select buffered-image
+    mode.  This takes 2 bytes/coefficient.  At typical 2x2 sampling, that's
+    3 bytes per pixel for a color image.  Worst case (1x1 sampling) requires
+    6 bytes/pixel.  For grayscale, figure 2 bytes/pixel.
+ 4. To perform 2-pass color quantization, the decompressor also needs a
+    128K color lookup table and a full-image pixel buffer (3 bytes/pixel).
+This does not count any memory allocated by the application, such as a
+buffer to hold the final output image.
+
+The above figures are valid for 8-bit JPEG data precision and a machine with
+32-bit ints.  For 12-bit JPEG data, double the size of the strip buffers and
+quantization pixel buffer.  The "fixed-size" data will be somewhat smaller
+with 16-bit ints, larger with 64-bit ints.  Also, CMYK or other unusual
+color spaces will require different amounts of space.
+
+The full-image coefficient and pixel buffers, if needed at all, do not
+have to be fully RAM resident; you can have the library use temporary
+files instead when the total memory usage would exceed a limit you set.
+(But if your OS supports virtual memory, it's probably better to just use
+jmemnobs and let the OS do the swapping.)
+
+The compressor's memory requirements are similar, except that it has no need
+for color quantization.  Also, it needs a full-image DCT coefficient buffer
+if Huffman-table optimization is asked for, even if progressive mode is not
+requested.
+
+If you need more detailed information about memory usage in a particular
+situation, you can enable the MEM_STATS code in jmemmgr.c.
+
+
 Library compile-time options
 ----------------------------
 
 A number of compile-time options are available by modifying jmorecfg.h.
 
 The JPEG standard provides for both the baseline 8-bit DCT process and
-a 12-bit DCT process.  12-bit lossy JPEG is supported if you define
+a 12-bit DCT process.  The IJG code supports 12-bit lossy JPEG if you define
 BITS_IN_JSAMPLE as 12 rather than 8.  Note that this causes JSAMPLE to be
 larger than a char, so it affects the surrounding application's image data.
 The sample applications cjpeg and djpeg can support 12-bit mode only for PPM
 and GIF file formats; you must disable the other file formats to compile a
-12-bit cjpeg or djpeg.  (install.doc has more information about that.)
+12-bit cjpeg or djpeg.  (install.txt has more information about that.)
 At present, a 12-bit library can handle *only* 12-bit images, not both
 precisions.  (If you need to include both 8- and 12-bit libraries in a single
 application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES
@@ -2658,6 +2943,9 @@ Note that a 12-bit library always compresses in Huffman optimization mode,
 in order to generate valid Huffman tables.  This is necessary because our
 default Huffman tables only cover 8-bit data.  If you need to output 12-bit
 files in one pass, you'll have to supply suitable default Huffman tables.
+You may also want to supply your own DCT quantization tables; the existing
+quality-scaling code has been developed for 8-bit use, and probably doesn't
+generate especially good tables for 12-bit.
 
 The maximum number of components (color channels) in the image is determined
 by MAX_COMPONENTS.  The JPEG standard allows up to 255 components, but we
@@ -2674,6 +2962,16 @@ to burn.
 You can reduce the size of the library by compiling out various optional
 functions.  To do this, undefine xxx_SUPPORTED symbols as necessary.
 
+You can also save a few K by not having text error messages in the library;
+the standard error message table occupies about 5Kb.  This is particularly
+reasonable for embedded applications where there's no good way to display 
+a message anyway.  To do this, remove the creation of the message table
+(jpeg_std_message_table[]) from jerror.c, and alter format_message to do
+something reasonable without it.  You could output the numeric value of the
+message code number, for example.  If you do this, you can also save a couple
+more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing;
+you don't need trace capability anyway, right?
+
 
 Portability considerations
 --------------------------
@@ -2684,9 +2982,9 @@ the design goals in this area.  (If you encounter any bugs that cause the
 library to be less portable than is claimed here, we'd appreciate hearing
 about them.)
 
-The code works fine on both ANSI and pre-ANSI C compilers, using any of the
-popular system include file setups, and some not-so-popular ones too.  See
-install.doc for configuration procedures.
+The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of
+the popular system include file setups, and some not-so-popular ones too.
+See install.txt for configuration procedures.
 
 The code is not dependent on the exact sizes of the C data types.  As
 distributed, we make the assumptions that
@@ -2725,7 +3023,7 @@ The code generally assumes that C names must be unique in the first 15
 characters.  However, global function names can be made unique in the
 first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES.
 
-More info about porting the code may be gleaned by reading jconfig.doc,
+More info about porting the code may be gleaned by reading jconfig.txt,
 jmorecfg.h, and jinclude.h.
 
 
@@ -2763,7 +3061,7 @@ Far data space may also be a tight resource when you are dealing with large
 images.  The most memory-intensive case is decompression with two-pass color
 quantization, or single-pass quantization to an externally supplied color
 map.  This requires a 128Kb color lookup table plus strip buffers amounting
-to about 50 bytes per column for typical sampling ratios (eg, about 32000
+to about 40 bytes per column for typical sampling ratios (eg, about 25600
 bytes for a 640-pixel-wide image).  You may not be able to process wide
 images if you have large data structures of your own.
 

makcjpeg.st

@@ -1,11 +1,10 @@
 ; Project file for Independent JPEG Group's software
 ;
 ; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de)
-; and to Dr. B. Setzepfandt (bernd@gina.uni-muenster.de).
+; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding.
 ;
-; To use this file, rename it to CJPEG.PRJ.
-; If you are using Turbo C, change filenames beginning with "PC..." to "TC..."
+; To use this file, rename it to cjpeg.prj.
+; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
 ; Read installation instructions before trying to make the program!
 ;
 ;
@@ -21,7 +20,7 @@ cjpeg.ttp
 .C[-wsig]     ; warn if significant digits may be lost
 =
 ; * * * * List of modules * * * * 
-PCSTART.O
+pcstart.o
 cjpeg.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
 cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 rdswitch.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
@@ -30,8 +29,8 @@ rdgif.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 rdtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 rdbmp.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 rdrle.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-LIBJPEG.LIB        ; built by LIBJPEG.PRJ
-PCFLTLIB.LIB       ; floating point library
+libjpeg.lib        ; built by libjpeg.prj
+pcfltlib.lib       ; floating point library
 ; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-PCSTDLIB.LIB       ; standard library
-PCEXTLIB.LIB       ; extended library
+pcstdlib.lib       ; standard library
+pcextlib.lib       ; extended library

makdjpeg.st

@@ -1,11 +1,10 @@
 ; Project file for Independent JPEG Group's software
 ;
 ; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de)
-; and to Dr. B. Setzepfandt (bernd@gina.uni-muenster.de).
+; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding.
 ;
-; To use this file, rename it to DJPEG.PRJ.
-; If you are using Turbo C, change filenames beginning with "PC..." to "TC..."
+; To use this file, rename it to djpeg.prj.
+; If you are using Turbo C, change filenames beginning with "pc..." to "tc..."
 ; Read installation instructions before trying to make the program!
 ;
 ;
@@ -21,7 +20,7 @@ djpeg.ttp
 .C[-wsig]     ; warn if significant digits may be lost
 =
 ; * * * * List of modules * * * * 
-PCSTART.O
+pcstart.o
 djpeg.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
 cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 rdcolmap.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
@@ -30,8 +29,8 @@ wrgif.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 wrtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 wrbmp.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
 wrrle.c		(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-LIBJPEG.LIB        ; built by LIBJPEG.PRJ
-PCFLTLIB.LIB       ; floating point library
+libjpeg.lib        ; built by libjpeg.prj
+pcfltlib.lib       ; floating point library
 ; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-PCSTDLIB.LIB       ; standard library
-PCEXTLIB.LIB       ; extended library
+pcstdlib.lib       ; standard library
+pcextlib.lib       ; extended library

makeadsw.vc6

@@ -0,0 +1,77 @@
+Microsoft Developer Studio Workspace File, Format Version 6.00
+# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL<45>SCHT WERDEN!
+
+###############################################################################
+
+Project: "cjpeg"=".\cjpeg.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "djpeg"=".\djpeg.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "jpegtran"=".\jpegtran.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "rdjpgcom"=".\rdjpgcom.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Project: "wrjpgcom"=".\wrjpgcom.dsp" - Package Owner=<4>
+
+Package=<5>
+{{{
+}}}
+
+Package=<4>
+{{{
+}}}
+
+###############################################################################
+
+Global:
+
+Package=<5>
+{{{
+}}}
+
+Package=<3>
+{{{
+}}}
+
+###############################################################################
+

makeasln.vc9

@@ -0,0 +1,33 @@
+<EFBFBD><EFBFBD><EFBFBD>
+Microsoft Visual Studio Solution File, Format Version 10.00
+# Visual C++ Express 2008
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcproj", "{B4F61778-C45D-45C6-9E87-06F03F50519F}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcproj", "{9B7E57AE-31CD-405E-8070-26A8303B9DC9}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcproj", "{813C33AF-9031-49D2-BA19-93D600CDD404}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcproj", "{EB107F86-A8CC-4507-8115-88D31DDE4CDF}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcproj", "{178670D7-FA7F-44A8-96C7-11B1CA14269C}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Release|Win32 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{B4F61778-C45D-45C6-9E87-06F03F50519F}.Release|Win32.ActiveCfg = Release|Win32
+		{B4F61778-C45D-45C6-9E87-06F03F50519F}.Release|Win32.Build.0 = Release|Win32
+		{9B7E57AE-31CD-405E-8070-26A8303B9DC9}.Release|Win32.ActiveCfg = Release|Win32
+		{9B7E57AE-31CD-405E-8070-26A8303B9DC9}.Release|Win32.Build.0 = Release|Win32
+		{813C33AF-9031-49D2-BA19-93D600CDD404}.Release|Win32.ActiveCfg = Release|Win32
+		{813C33AF-9031-49D2-BA19-93D600CDD404}.Release|Win32.Build.0 = Release|Win32
+		{EB107F86-A8CC-4507-8115-88D31DDE4CDF}.Release|Win32.ActiveCfg = Release|Win32
+		{EB107F86-A8CC-4507-8115-88D31DDE4CDF}.Release|Win32.Build.0 = Release|Win32
+		{178670D7-FA7F-44A8-96C7-11B1CA14269C}.Release|Win32.ActiveCfg = Release|Win32
+		{178670D7-FA7F-44A8-96C7-11B1CA14269C}.Release|Win32.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

makecdep.vc6

@@ -0,0 +1,82 @@
+# Microsoft Developer Studio erstellte Abh<62>ngigkeitsdatei, einbezogen von cjpeg.mak
+
+.\cdjpeg.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\cjpeg.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	".\jversion.h"\
+	
+
+.\rdbmp.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdgif.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdppm.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdrle.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdswitch.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+	
+
+.\rdtarga.c : \
+	".\cderror.h"\
+	".\cdjpeg.h"\
+	".\jconfig.h"\
+	".\jerror.h"\
+	".\jinclude.h"\
+	".\jmorecfg.h"\
+	".\jpeglib.h"\
+