Clarify the DLL hell problem

git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@154 632fc199-4ca6-4c93-a231-07263d6284db

BUILDING.txt

@@ -0,0 +1,306 @@
+*******************************************************************************
+**     Building on Unix Platforms, Cygwin, and MinGW
+*******************************************************************************
+
+==================
+Build Requirements
+==================
+
+-- autoconf 2.56 or later
+   * If using MinGW, this can be obtained by installing the MSYS DTK
+
+-- automake 1.7 or later
+   * If using MinGW, this can be obtained by installing the MSYS DTK
+
+-- libtool 1.4 or later
+   * If using MinGW, this can be obtained by installing the MSYS DTK
+
+-- NASM
+   * 0.98 or later is required for a 32-bit build
+   * NASM 2.05 or later is required for a 64-bit build
+   * NASM 2.07 or later is required for a 64-bit build on OS/X (10.6 "Snow
+     Leopard" or later.)  This can be obtained from MacPorts
+     (http://www.macports.org/).
+
+   The NASM 2.05 RPMs do not work on older Linux systems, such as Enterprise
+   Linux 4.  On such systems, you can easily build and install NASM 2.05
+   from the source RPM by executing the following as root:
+
+     ARCH=`uname -m`
+     wget http://www.nasm.us/pub/nasm/releasebuilds/2.05.01/nasm-2.05.01-1.src.rpm
+     rpmbuild --rebuild nasm-2.05.01-1.src.rpm
+     rpm -Uvh /usr/src/redhat/RPMS/$ARCH/nasm-2.05.01-1.$ARCH.rpm
+
+   NOTE: NASM build will fail if texinfo is not installed.
+
+-- GCC v4.1 or later recommended for best performance
+
+======================
+Building libjpeg-turbo
+======================
+
+The following procedure will build libjpeg-turbo on Linux, 32-bit OS X, and
+Solaris/x86 systems (on Solaris, this generates a 32-bit library.  See below
+for 64-bit build instructions.)
+
+  cd libjpeg-turbo
+  autoreconf -fiv
+  sh ./configure
+  make
+
+NOTE: Running autoreconf is only necessary if building libjpeg-turbo from the
+SVN repository.
+
+This will generate the following files under .libs/
+
+  libjpeg.a
+      Static link library for libjpeg-turbo
+
+  libjpeg.so.62.0.0 (Linux, Solaris)
+  libjpeg.62.dylib (OS X)
+  libjpeg-62.dll (MinGW)
+  cygjpeg-62.dll (Cygwin)
+      Shared library for libjpeg-turbo
+
+  libjpeg.so (Linux, Solaris)
+  libjpeg.dylib (OS X)
+  libjpeg.dll.a (Cygwin, MinGW)
+      Development stub for libjpeg-turbo shared library
+
+  libturbojpeg.a
+      Static link library for TurboJPEG/OSS
+
+  libturbojpeg.so (Linux, Solaris)
+  libturbojpeg.dylib (OS X)
+      Shared library and development stub for TurboJPEG/OSS
+
+  libturbojpeg.dll (MinGW)
+  cygturbojpeg.dll (Cygwin)
+      Shared library for TurboJPEG/OSS
+
+  libturbojpeg.dll.a (Cygwin, MinGW)
+      Development stub for TurboJPEG/OSS shared library
+
+========================
+Installing libjpeg-turbo
+========================
+
+If you intend to install these libraries and the associated header files, then
+replace 'make' in the instructions above with
+
+  make install prefix={base dir} libdir={library directory}
+
+For example,
+
+  make install prefix=/usr/local libdir=/usr/local/lib64
+
+will install the header files in /usr/local/include and the library files in
+/usr/local/lib64.  If 'prefix' and 'libdir' are not specified, then the default
+is to install the header files in /opt/libjpeg-turbo/include and the library
+files in /opt/libjpeg-turbo/lib.
+
+NOTE: You can specify a prefix of /usr and a libdir of, for instance,
+/usr/lib64 to overwrite the system's version of libjpeg.  If you do this,
+however, then be sure to BACK UP YOUR SYSTEM'S INSTALLATION OF LIBJPEG before
+overwriting it.  It is recommended that you instead install libjpeg-turbo into
+a non-system directory and manipulate the LD_LIBRARY_PATH or create sym links
+to force applications to use libjpeg-turbo instead of libjpeg.  See
+README-turbo.txt for more information.
+
+=============
+Build Recipes
+=============
+
+32-bit Library Build on 64-bit Linux
+------------------------------------
+
+Add
+
+  --host i686-pc-linux-gnu CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32'
+
+to the configure command line.
+
+
+64-bit Library Build on 64-bit OS/X
+-----------------------------------
+
+Add
+
+  --host x86_64-apple-darwin10.0.0 NASM=/opt/local/bin/nasm
+
+to the configure command line.  NASM 2.07 from MacPorts must be installed.
+
+
+32-bit Library Build on 64-bit OS/X
+-----------------------------------
+
+Add
+
+  CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32' LDFLAGS=-m32
+
+to the configure command line.
+
+
+32-bit Backward-Compatible Library Build on 64-bit OS/X
+-------------------------------------------------------
+
+Add
+
+  CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4 -O3 -m32' \
+    CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4 -O3 -m32' \
+    LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4 -m32'
+
+to the configure command line.  The OS X 10.4 SDK must be installed.
+
+
+64-bit Library Build on 64-bit Solaris
+--------------------------------------
+
+Add
+
+  --host x86_64-pc-solaris CFLAGS='-O3 -m64' CXXFLAGS='-O3 -m64' LDFLAGS=-m64
+
+to the configure command line.
+
+
+MinGW Build on Cygwin
+---------------------
+
+Add
+
+  --host mingw32
+
+to the configure command line.  This will produce libraries which do not
+depend on cygwin1.dll or other Cygwin DLL's.
+
+
+Sun Studio
+----------
+
+Add
+
+  CC=cc CXX=CC
+
+to the configure command line.  libjpeg-turbo will automatically be built with
+the maximum optimization level (-xO5) unless you override CFLAGS and CXXFLAGS.
+
+To build a 64-bit version of libjpeg-turbo using Sun Studio, add
+
+  --host x86_64-pc-solaris CC=cc CXX=CC CFLAGS='-xO5 -m64' \
+    CXXFLAGS='-xO5 -m64' LDFLAGS=-m64
+
+to the configure command line.
+
+
+*******************************************************************************
+**     Building on Windows (Visual C++)
+*******************************************************************************
+
+==================
+Build Requirements
+==================
+
+-- GNU Make v3.7 or later
+   * Can be found in MSYS (http://www.mingw.org/download.shtml) or
+     Cygwin (http://www.cygwin.com/)
+
+-- Windows SDK for Windows Server 2008 and .NET Framework 3.5 (or a later
+   version)
+
+   http://msdn.microsoft.com/en-us/windows/dd146047.aspx
+
+   * The Windows SDK includes both 32-bit and 64-bit Visual C++ compilers and
+     everything necessary to build libjpeg-turbo.  If you do not already have
+     Visual C++ installed, then this is the recommended solution.  Also tested
+     with Microsoft Visual C++ 2008 Express Edition (both are free downloads.)
+   * Add the compiler and SDK binary directories (for instance,
+     c:\Program Files\Microsoft Visual Studio 9.0\VC\BIN;
+     c:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE;
+     c:\Program Files\Microsoft SDKs\Windows\v6.1\bin)
+     to the system or user PATH environment variable prior to building
+     libjpeg-turbo.
+   * Add the compiler and SDK include directories (for instance,
+     c:\Program Files\Microsoft Visual Studio 9.0\VC\INCLUDE;
+     c:\Program Files\Microsoft SDKs\Windows\v6.1\include)
+     to the system or user INCLUDE environment variable prior to building
+     libjpeg-turbo.
+   * Add the compiler library directory (for instance,
+     c:\Program Files\Microsoft Visual Studio 9.0\VC\LIB;
+     c:\Program Files\Microsoft SDKs\Windows\v6.1\lib)
+     to the system or user LIB environment variable prior to building
+     libjpeg-turbo.
+
+-- NASM (http://www.nasm.us/) 0.98 or later
+
+======================
+Building libjpeg-turbo
+======================
+
+  cd libjpeg-turbo
+  make -f win/Makefile
+
+This will generate the following files under libjpeg-turbo\windows\:
+
+  jpeg-static.lib        Static link library for libjpeg-turbo
+  jpeg62.dll             Shared library for libjpeg-turbo
+  jpeg.lib               Development stub for libjpeg-turbo shared library
+  turbojpeg-static.lib   Static link library for TurboJPEG/OSS
+  turbojpeg.dll          Shared library for TurboJPEG/OSS
+  turbojpeg.lib          Development stub for TurboJPEG/OSS shared library
+
+#If a 64-bit Windows platform is detected, then the build system will attempt
+#to build a 64-bit version of libjpeg-turbo.  You can override this by running
+#
+#  make -f win/Makefile WIN64=no
+
+NOTE:  For unknown reasons, Win64 support doesn't work yet, so at the moment,
+you have to run 'make -f win/Makefile WIN64=yes' to get a 64-bit build on
+64-bit Windows.  The paragraph above will apply once Win64 support is working.
+
+
+*******************************************************************************
+**     Creating Release Packages
+*******************************************************************************
+
+The following commands can be used to create various types of release packages:
+
+make rpm
+
+  Create RedHat-style binary RPM package.  Requires RPM v4 or later.
+
+make srpm
+
+  This runs 'make dist' to create a pristine source tarball, then creates a
+  RedHat-style source RPM package from the tarball.  Requires RPM v4 or later.
+
+make deb
+
+  Create Debian-style binary package.  Requires dpkg.
+
+make dmg
+
+  Create Macintosh package/disk image.  This requires the PackageMaker
+  application, which must be installed in /Developer/Applications/Utilities.
+
+make udmg
+
+  On 64-bit OS X (10.6 "Snow Leopard" or later), this creates a version of the
+  Macintosh package/disk image which contains universal i386/x86-64 binaries.
+  The 32-bit fork of these binaries is backward compatible with OS X 10.4 and
+  later, whereas the 64-bit fork is compatible with OS X 10.6 and later.  OS X
+  10.4 compatibility SDK required.
+
+make nsi
+
+  When using MinGW, this creates a Win32 installer for the GCC version of the
+  libjpeg-turbo SDK.  This requires the Nullsoft Install System
+  (http://nsis.sourceforge.net/.)  makensis.exe should be in your PATH.
+
+make -f win/Makefile dist
+
+  This creates a Win32 installer for the Visual C++ version of the
+  libjpeg-turbo SDK.  This requires the Nullsoft Install System
+  (http://nsis.sourceforge.net/.)  makensis.exe should be in your PATH.

LGPL.txt

@@ -0,0 +1,504 @@
+		  GNU LESSER GENERAL PUBLIC LICENSE
+		       Version 2.1, February 1999
+
+ Copyright (C) 1991, 1999 Free Software Foundation, Inc.
+     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+[This is the first released version of the Lesser GPL.  It also counts
+ as the successor of the GNU Library Public License, version 2, hence
+ the version number 2.1.]
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+Licenses are intended to guarantee your freedom to share and change
+free software--to make sure the software is free for all its users.
+
+  This license, the Lesser General Public License, applies to some
+specially designated software packages--typically libraries--of the
+Free Software Foundation and other authors who decide to use it.  You
+can use it too, but we suggest you first think carefully about whether
+this license or the ordinary General Public License is the better
+strategy to use in any particular case, based on the explanations below.
+
+  When we speak of free software, we are referring to freedom of use,
+not price.  Our General Public Licenses are designed to make sure that
+you have the freedom to distribute copies of free software (and charge
+for this service if you wish); that you receive source code or can get
+it if you want it; that you can change the software and use pieces of
+it in new free programs; and that you are informed that you can do
+these things.
+
+  To protect your rights, we need to make restrictions that forbid
+distributors to deny you these rights or to ask you to surrender these
+rights.  These restrictions translate to certain responsibilities for
+you if you distribute copies of the library or if you modify it.
+
+  For example, if you distribute copies of the library, whether gratis
+or for a fee, you must give the recipients all the rights that we gave
+you.  You must make sure that they, too, receive or can get the source
+code.  If you link other code with the library, you must provide
+complete object files to the recipients, so that they can relink them
+with the library after making changes to the library and recompiling
+it.  And you must show them these terms so they know their rights.
+
+  We protect your rights with a two-step method: (1) we copyright the
+library, and (2) we offer you this license, which gives you legal
+permission to copy, distribute and/or modify the library.
+
+  To protect each distributor, we want to make it very clear that
+there is no warranty for the free library.  Also, if the library is
+modified by someone else and passed on, the recipients should know
+that what they have is not the original version, so that the original
+author's reputation will not be affected by problems that might be
+introduced by others.
+
+  Finally, software patents pose a constant threat to the existence of
+any free program.  We wish to make sure that a company cannot
+effectively restrict the users of a free program by obtaining a
+restrictive license from a patent holder.  Therefore, we insist that
+any patent license obtained for a version of the library must be
+consistent with the full freedom of use specified in this license.
+
+  Most GNU software, including some libraries, is covered by the
+ordinary GNU General Public License.  This license, the GNU Lesser
+General Public License, applies to certain designated libraries, and
+is quite different from the ordinary General Public License.  We use
+this license for certain libraries in order to permit linking those
+libraries into non-free programs.
+
+  When a program is linked with a library, whether statically or using
+a shared library, the combination of the two is legally speaking a
+combined work, a derivative of the original library.  The ordinary
+General Public License therefore permits such linking only if the
+entire combination fits its criteria of freedom.  The Lesser General
+Public License permits more lax criteria for linking other code with
+the library.
+
+  We call this license the "Lesser" General Public License because it
+does Less to protect the user's freedom than the ordinary General
+Public License.  It also provides other free software developers Less
+of an advantage over competing non-free programs.  These disadvantages
+are the reason we use the ordinary General Public License for many
+libraries.  However, the Lesser license provides advantages in certain
+special circumstances.
+
+  For example, on rare occasions, there may be a special need to
+encourage the widest possible use of a certain library, so that it becomes
+a de-facto standard.  To achieve this, non-free programs must be
+allowed to use the library.  A more frequent case is that a free
+library does the same job as widely used non-free libraries.  In this
+case, there is little to gain by limiting the free library to free
+software only, so we use the Lesser General Public License.
+
+  In other cases, permission to use a particular library in non-free
+programs enables a greater number of people to use a large body of
+free software.  For example, permission to use the GNU C Library in
+non-free programs enables many more people to use the whole GNU
+operating system, as well as its variant, the GNU/Linux operating
+system.
+
+  Although the Lesser General Public License is Less protective of the
+users' freedom, it does ensure that the user of a program that is
+linked with the Library has the freedom and the wherewithal to run
+that program using a modified version of the Library.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.  Pay close attention to the difference between a
+"work based on the library" and a "work that uses the library".  The
+former contains code derived from the library, whereas the latter must
+be combined with the library in order to run.
+
+		  GNU LESSER GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License Agreement applies to any software library or other
+program which contains a notice placed by the copyright holder or
+other authorized party saying it may be distributed under the terms of
+this Lesser General Public License (also called "this License").
+Each licensee is addressed as "you".
+
+  A "library" means a collection of software functions and/or data
+prepared so as to be conveniently linked with application programs
+(which use some of those functions and data) to form executables.
+
+  The "Library", below, refers to any such software library or work
+which has been distributed under these terms.  A "work based on the
+Library" means either the Library or any derivative work under
+copyright law: that is to say, a work containing the Library or a
+portion of it, either verbatim or with modifications and/or translated
+straightforwardly into another language.  (Hereinafter, translation is
+included without limitation in the term "modification".)
+
+  "Source code" for a work means the preferred form of the work for
+making modifications to it.  For a library, complete source code means
+all the source code for all modules it contains, plus any associated
+interface definition files, plus the scripts used to control compilation
+and installation of the library.
+
+  Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running a program using the Library is not restricted, and output from
+such a program is covered only if its contents constitute a work based
+on the Library (independent of the use of the Library in a tool for
+writing it).  Whether that is true depends on what the Library does
+and what the program that uses the Library does.
+  
+  1. You may copy and distribute verbatim copies of the Library's
+complete source code as you receive it, in any medium, provided that
+you conspicuously and appropriately publish on each copy an
+appropriate copyright notice and disclaimer of warranty; keep intact
+all the notices that refer to this License and to the absence of any
+warranty; and distribute a copy of this License along with the
+Library.
+
+  You may charge a fee for the physical act of transferring a copy,
+and you may at your option offer warranty protection in exchange for a
+fee.
+
+  2. You may modify your copy or copies of the Library or any portion
+of it, thus forming a work based on the Library, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) The modified work must itself be a software library.
+
+    b) You must cause the files modified to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    c) You must cause the whole of the work to be licensed at no
+    charge to all third parties under the terms of this License.
+
+    d) If a facility in the modified Library refers to a function or a
+    table of data to be supplied by an application program that uses
+    the facility, other than as an argument passed when the facility
+    is invoked, then you must make a good faith effort to ensure that,
+    in the event an application does not supply such function or
+    table, the facility still operates, and performs whatever part of
+    its purpose remains meaningful.
+
+    (For example, a function in a library to compute square roots has
+    a purpose that is entirely well-defined independent of the
+    application.  Therefore, Subsection 2d requires that any
+    application-supplied function or table used by this function must
+    be optional: if the application does not supply it, the square
+    root function must still compute square roots.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Library,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Library, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote
+it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Library.
+
+In addition, mere aggregation of another work not based on the Library
+with the Library (or with a work based on the Library) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may opt to apply the terms of the ordinary GNU General Public
+License instead of this License to a given copy of the Library.  To do
+this, you must alter all the notices that refer to this License, so
+that they refer to the ordinary GNU General Public License, version 2,
+instead of to this License.  (If a newer version than version 2 of the
+ordinary GNU General Public License has appeared, then you can specify
+that version instead if you wish.)  Do not make any other change in
+these notices.
+
+  Once this change is made in a given copy, it is irreversible for
+that copy, so the ordinary GNU General Public License applies to all
+subsequent copies and derivative works made from that copy.
+
+  This option is useful when you wish to copy part of the code of
+the Library into a program that is not a library.
+
+  4. You may copy and distribute the Library (or a portion or
+derivative of it, under Section 2) in object code or executable form
+under the terms of Sections 1 and 2 above provided that you accompany
+it with the complete corresponding machine-readable source code, which
+must be distributed under the terms of Sections 1 and 2 above on a
+medium customarily used for software interchange.
+
+  If distribution of object code is made by offering access to copy
+from a designated place, then offering equivalent access to copy the
+source code from the same place satisfies the requirement to
+distribute the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  5. A program that contains no derivative of any portion of the
+Library, but is designed to work with the Library by being compiled or
+linked with it, is called a "work that uses the Library".  Such a
+work, in isolation, is not a derivative work of the Library, and
+therefore falls outside the scope of this License.
+
+  However, linking a "work that uses the Library" with the Library
+creates an executable that is a derivative of the Library (because it
+contains portions of the Library), rather than a "work that uses the
+library".  The executable is therefore covered by this License.
+Section 6 states terms for distribution of such executables.
+
+  When a "work that uses the Library" uses material from a header file
+that is part of the Library, the object code for the work may be a
+derivative work of the Library even though the source code is not.
+Whether this is true is especially significant if the work can be
+linked without the Library, or if the work is itself a library.  The
+threshold for this to be true is not precisely defined by law.
+
+  If such an object file uses only numerical parameters, data
+structure layouts and accessors, and small macros and small inline
+functions (ten lines or less in length), then the use of the object
+file is unrestricted, regardless of whether it is legally a derivative
+work.  (Executables containing this object code plus portions of the
+Library will still fall under Section 6.)
+
+  Otherwise, if the work is a derivative of the Library, you may
+distribute the object code for the work under the terms of Section 6.
+Any executables containing that work also fall under Section 6,
+whether or not they are linked directly with the Library itself.
+
+  6. As an exception to the Sections above, you may also combine or
+link a "work that uses the Library" with the Library to produce a
+work containing portions of the Library, and distribute that work
+under terms of your choice, provided that the terms permit
+modification of the work for the customer's own use and reverse
+engineering for debugging such modifications.
+
+  You must give prominent notice with each copy of the work that the
+Library is used in it and that the Library and its use are covered by
+this License.  You must supply a copy of this License.  If the work
+during execution displays copyright notices, you must include the
+copyright notice for the Library among them, as well as a reference
+directing the user to the copy of this License.  Also, you must do one
+of these things:
+
+    a) Accompany the work with the complete corresponding
+    machine-readable source code for the Library including whatever
+    changes were used in the work (which must be distributed under
+    Sections 1 and 2 above); and, if the work is an executable linked
+    with the Library, with the complete machine-readable "work that
+    uses the Library", as object code and/or source code, so that the
+    user can modify the Library and then relink to produce a modified
+    executable containing the modified Library.  (It is understood
+    that the user who changes the contents of definitions files in the
+    Library will not necessarily be able to recompile the application
+    to use the modified definitions.)
+
+    b) Use a suitable shared library mechanism for linking with the
+    Library.  A suitable mechanism is one that (1) uses at run time a
+    copy of the library already present on the user's computer system,
+    rather than copying library functions into the executable, and (2)
+    will operate properly with a modified version of the library, if
+    the user installs one, as long as the modified version is
+    interface-compatible with the version that the work was made with.
+
+    c) Accompany the work with a written offer, valid for at
+    least three years, to give the same user the materials
+    specified in Subsection 6a, above, for a charge no more
+    than the cost of performing this distribution.
+
+    d) If distribution of the work is made by offering access to copy
+    from a designated place, offer equivalent access to copy the above
+    specified materials from the same place.
+
+    e) Verify that the user has already received a copy of these
+    materials or that you have already sent this user a copy.
+
+  For an executable, the required form of the "work that uses the
+Library" must include any data and utility programs needed for
+reproducing the executable from it.  However, as a special exception,
+the materials to be distributed need not include anything that is
+normally distributed (in either source or binary form) with the major
+components (compiler, kernel, and so on) of the operating system on
+which the executable runs, unless that component itself accompanies
+the executable.
+
+  It may happen that this requirement contradicts the license
+restrictions of other proprietary libraries that do not normally
+accompany the operating system.  Such a contradiction means you cannot
+use both them and the Library together in an executable that you
+distribute.
+
+  7. You may place library facilities that are a work based on the
+Library side-by-side in a single library together with other library
+facilities not covered by this License, and distribute such a combined
+library, provided that the separate distribution of the work based on
+the Library and of the other library facilities is otherwise
+permitted, and provided that you do these two things:
+
+    a) Accompany the combined library with a copy of the same work
+    based on the Library, uncombined with any other library
+    facilities.  This must be distributed under the terms of the
+    Sections above.
+
+    b) Give prominent notice with the combined library of the fact
+    that part of it is a work based on the Library, and explaining
+    where to find the accompanying uncombined form of the same work.
+
+  8. You may not copy, modify, sublicense, link with, or distribute
+the Library except as expressly provided under this License.  Any
+attempt otherwise to copy, modify, sublicense, link with, or
+distribute the Library is void, and will automatically terminate your
+rights under this License.  However, parties who have received copies,
+or rights, from you under this License will not have their licenses
+terminated so long as such parties remain in full compliance.
+
+  9. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Library or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Library (or any work based on the
+Library), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Library or works based on it.
+
+  10. Each time you redistribute the Library (or any work based on the
+Library), the recipient automatically receives a license from the
+original licensor to copy, distribute, link with or modify the Library
+subject to these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties with
+this License.
+
+  11. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Library at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Library by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Library.
+
+If any portion of this section is held invalid or unenforceable under any
+particular circumstance, the balance of the section is intended to apply,
+and the section as a whole is intended to apply in other circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  12. If the distribution and/or use of the Library is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Library under this License may add
+an explicit geographical distribution limitation excluding those countries,
+so that distribution is permitted only in or among countries not thus
+excluded.  In such case, this License incorporates the limitation as if
+written in the body of this License.
+
+  13. The Free Software Foundation may publish revised and/or new
+versions of the Lesser General Public License from time to time.
+Such new versions will be similar in spirit to the present version,
+but may differ in detail to address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Library
+specifies a version number of this License which applies to it and
+"any later version", you have the option of following the terms and
+conditions either of that version or of any later version published by
+the Free Software Foundation.  If the Library does not specify a
+license version number, you may choose any version ever published by
+the Free Software Foundation.
+
+  14. If you wish to incorporate parts of the Library into other free
+programs whose distribution conditions are incompatible with these,
+write to the author to ask for permission.  For software which is
+copyrighted by the Free Software Foundation, write to the Free
+Software Foundation; we sometimes make exceptions for this.  Our
+decision will be guided by the two goals of preserving the free status
+of all derivatives of our free software and of promoting the sharing
+and reuse of software generally.
+
+			    NO WARRANTY
+
+  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
+WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
+EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
+OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
+KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
+LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
+THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
+
+  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
+WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
+AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
+FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
+CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
+LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
+RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
+FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
+SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
+DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+           How to Apply These Terms to Your New Libraries
+
+  If you develop a new library, and you want it to be of the greatest
+possible use to the public, we recommend making it free software that
+everyone can redistribute and change.  You can do so by permitting
+redistribution under these terms (or, alternatively, under the terms of the
+ordinary General Public License).
+
+  To apply these terms, attach the following notices to the library.  It is
+safest to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least the
+"copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the library's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This library is free software; you can redistribute it and/or
+    modify it under the terms of the GNU Lesser General Public
+    License as published by the Free Software Foundation; either
+    version 2.1 of the License, or (at your option) any later version.
+
+    This library is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+    Lesser General Public License for more details.
+
+    You should have received a copy of the GNU Lesser General Public
+    License along with this library; if not, write to the Free Software
+    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+
+Also add information on how to contact you by electronic and paper mail.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the library, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the
+  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
+
+  <signature of Ty Coon>, 1 April 1990
+  Ty Coon, President of Vice
+
+That's all there is to it!
+
+

LICENSE.txt

@@ -0,0 +1,53 @@
+                wxWindows Library Licence, Version 3.1
+                ======================================
+
+  Copyright (C) 1998-2005 Julian Smart, Robert Roebling et al
+
+  Everyone is permitted to copy and distribute verbatim copies
+  of this licence document, but changing it is not allowed.
+
+                       WXWINDOWS LIBRARY LICENCE
+     TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+  
+  This library is free software; you can redistribute it and/or modify it
+  under the terms of the GNU Library General Public Licence as published by
+  the Free Software Foundation; either version 2 of the Licence, or (at
+  your option) any later version.
+  
+  This library is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library
+  General Public Licence for more details.
+
+  You should have received a copy of the GNU Library General Public Licence
+  along with this software, usually in a file named COPYING.LIB.  If not,
+  write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+  Boston, MA 02111-1307 USA.
+
+  EXCEPTION NOTICE
+
+  1. As a special exception, the copyright holders of this library give
+  permission for additional uses of the text contained in this release of
+  the library as licenced under the wxWindows Library Licence, applying
+  either version 3.1 of the Licence, or (at your option) any later version of
+  the Licence as published by the copyright holders of version
+  3.1 of the Licence document.
+
+  2. The exception is that you may use, copy, link, modify and distribute
+  under your own terms, binary object code versions of works based
+  on the Library.
+
+  3. If you copy code from files distributed under the terms of the GNU
+  General Public Licence or the GNU Library General Public Licence into a
+  copy of this library, as this licence permits, the exception does not
+  apply to the code that you add in this way.  To avoid misleading anyone as
+  to the status of such modified files, you must delete this exception
+  notice from such code and/or adjust the licensing conditions notice
+  accordingly.
+
+  4. If you write modifications of your own for this library, it is your
+  choice whether to permit this exception to apply to your modifications. 
+  If you do not wish that, you must delete the exception notice from such
+  code and/or adjust the licensing conditions notice accordingly.
+
+

Makefile.am

@@ -0,0 +1,171 @@
+lib_LTLIBRARIES = libjpeg.la libturbojpeg.la
+libjpeg_la_LDFLAGS = -version-number 62:0:0 -no-undefined
+libturbojpeg_la_LDFLAGS = -avoid-version -no-undefined
+include_HEADERS = jerror.h jmorecfg.h jpeglib.h turbojpeg.h
+nodist_include_HEADERS = jconfig.h
+
+HDRS = jchuff.h jdct.h jdhuff.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
+	jpegint.h jpeglib.h jversion.h jsimd.h jsimddct.h
+
+libjpeg_la_SOURCES = $(HDRS) jcapimin.c jcapistd.c jccoefct.c jccolor.c \
+	jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+	jcomapi.c jcparam.c jcphuff.c jcprepct.c jcsample.c jctrans.c \
+	jdapimin.c jdapistd.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+	jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+	jdmerge.c jdphuff.c jdpostct.c jdsample.c jdtrans.c jerror.c \
+	jfdctflt.c jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c \
+	jidctred.c jquant1.c jquant2.c jutils.c jmemmgr.c jmemnobs.c
+
+libturbojpeg_la_SOURCES = $(libjpeg_la_SOURCES) turbojpegl.c turbojpeg.h \
+	turbojpeg-mapfile
+
+if VERSION_SCRIPT
+
+libturbojpeg_la_LDFLAGS += $(VERSION_SCRIPT_FLAG)$(srcdir)/turbojpeg-mapfile
+
+endif
+
+if WITH_SIMD
+
+SUBDIRS = simd
+libjpeg_la_LIBADD = simd/libsimd.la
+libturbojpeg_la_LIBADD = simd/libsimd.la
+
+else
+
+libjpeg_la_SOURCES += jsimd_none.c
+
+endif
+
+TSTHDRS = rrutil.h rrtimer.h
+
+noinst_PROGRAMS = jpgtest jpegut cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+
+jpgtest_SOURCES = $(TSTHDRS) jpgtest.cxx bmp.h bmp.c
+
+jpgtest_LDADD = libturbojpeg.la
+
+jpegut_SOURCES = $(TSTHDRS) jpegut.c bmp.h bmp.c
+
+jpegut_LDADD = libturbojpeg.la
+
+cjpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c cjpeg.c rdbmp.c rdgif.c \
+	rdppm.c rdswitch.c rdtarga.c 
+
+cjpeg_LDADD = libjpeg.la
+
+cjpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
+	-DTARGA_SUPPORTED
+
+djpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c djpeg.c rdcolmap.c rdswitch.c \
+	wrbmp.c wrgif.c wrppm.c wrtarga.c
+
+djpeg_LDADD = libjpeg.la
+
+djpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
+	-DTARGA_SUPPORTED
+
+jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c transupp.h
+
+jpegtran_LDADD = libjpeg.la
+
+rdjpgcom_SOURCES = rdjpgcom.c
+
+rdjpgcom_LDADD = libjpeg.la
+
+wrjpgcom_SOURCES = wrjpgcom.c
+
+wrjpgcom_LDADD = libjpeg.la
+
+
+DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
+
+DOCS= README install.doc usage.doc wizard.doc example.c libjpeg.doc \
+	structure.doc coderules.doc filelist.doc jconfig.doc change.log \
+	README-turbo.txt rdrle.c wrrle.c LICENSE.txt LGPL.txt BUILDING.txt
+
+TESTFILES= testorig.jpg testorig.ppm testimg.bmp testimgflt.jpg \
+	testimgfst.jpg testimgint.jpg testimgp.jpg testimgfst.ppm testimgint.ppm
+
+EXTRA_DIST = win release $(DOCS) $(DISTMANS) $(TESTFILES)
+
+dist-hook:
+	rm -rf `find $(distdir) -name .svn`
+
+
+test: testclean cjpeg djpeg jpegtran jpegut
+	./jpegut
+	./cjpeg -dct int -outfile testoutint.jpg $(srcdir)/testorig.ppm
+	./cjpeg -dct fast -opt -outfile testoutfst.jpg $(srcdir)/testorig.ppm
+	./cjpeg -dct float -outfile testoutflt.jpg $(srcdir)/testorig.ppm
+	cmp $(srcdir)/testimgint.jpg testoutint.jpg
+	cmp $(srcdir)/testimgfst.jpg testoutfst.jpg
+	cmp $(srcdir)/testimgflt.jpg testoutflt.jpg
+	./djpeg -dct int -fast -ppm -outfile testoutint.ppm $(srcdir)/testorig.jpg
+	./djpeg -dct fast -ppm -outfile testoutfst.ppm $(srcdir)/testorig.jpg
+	./djpeg -dct float -ppm -outfile testoutflt.ppm $(srcdir)/testorig.jpg
+	cmp $(srcdir)/testimgint.ppm testoutint.ppm
+	cmp $(srcdir)/testimgfst.ppm testoutfst.ppm
+	cmp $(srcdir)/testorig.ppm testoutflt.ppm
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
+	cmp $(srcdir)/testimg.bmp testout.bmp
+	./cjpeg -dct int -progressive -outfile testoutp.jpg $(srcdir)/testorig.ppm
+	cmp $(srcdir)/testimgp.jpg testoutp.jpg
+	./jpegtran -outfile testoutt.jpg testoutp.jpg
+	cmp $(srcdir)/testimgint.jpg testoutt.jpg
+
+testclean:
+	$(RM) testout*
+	$(RM) *_GRAYQ[0-9]*.bmp
+	$(RM) *_GRAYQ[0-9]*.ppm
+	$(RM) *_GRAYQ[0-9]*.jpg
+	$(RM) *_420Q[0-9]*.bmp
+	$(RM) *_420Q[0-9]*.ppm
+	$(RM) *_420Q[0-9]*.jpg
+	$(RM) *_422Q[0-9]*.bmp
+	$(RM) *_422Q[0-9]*.ppm
+	$(RM) *_422Q[0-9]*.jpg
+	$(RM) *_444Q[0-9]*.bmp
+	$(RM) *_444Q[0-9]*.ppm
+	$(RM) *_444Q[0-9]*.jpg
+
+rpm: all
+	sh $(srcdir)/release/makerpm ${PACKAGE_NAME} ${VERSION} ${BUILD} \
+		${RPMARCH} ${srcdir}
+
+srpm: dist-gzip
+	sh $(srcdir)/release/makesrpm ${PACKAGE_NAME} ${VERSION} ${BUILD} ${srcdir}
+
+deb: all
+	sh $(srcdir)/release/makedpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
+		${DEBARCH} ${srcdir}
+
+if X86_64
+
+udmg: all
+	sh $(srcdir)/release/makemacpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
+		${srcdir} universal
+
+endif
+
+dmg: all
+	sh $(srcdir)/release/makemacpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} ${srcdir}
+
+if X86_64
+
+sunpkg: all
+	sh $(srcdir)/release/makesunpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
+		${DEBARCH} ${srcdir} $(CC) $(CXX) combined
+
+else
+
+sunpkg: all
+	sh $(srcdir)/release/makesunpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
+		${DEBARCH} ${srcdir} $(CC) $(CXX)
+
+endif
+
+nsi: all
+	makensis -nocd -DVERSION=$(VERSION) -DAPPNAME=libjpeg-turbo-gcc \
+		-DWLIBDIR=.libs -DWSRCDIR=$(srcdir) -DWBLDDIR=. -DWHDRDIR=. \
+		-DPLATFORM="GCC" -DGCC $(srcdir)/release/libjpeg-turbo.nsi

README

@@ -1,8 +1,15 @@
+libjpeg-turbo note:  This is the legacy document from the original libjpeg v6b
+release, which is included for reference.  The Internet addresses given below
+are likely non-functional.  For more information about the libjpeg project,
+please see http://www.ijg.org.  For more information about libjpeg-turbo,
+please see http://libjpeg-turbo.virtualgl.org.
+
+
 The Independent JPEG Group's JPEG software
 ==========================================
 
-README for release 6a of 7-Feb-96
-=================================
+README for release 6b of 27-Mar-1998
+====================================
 
 This distribution contains the sixth public release of the Independent JPEG
 Group's free JPEG software.  You are welcome to redistribute this software and
@@ -13,9 +20,10 @@ larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to
 our electronic mailing list.  Mailing list members are notified of updates
 and have a chance to participate in technical discussions, etc.
 
-This software is the work of Tom Lane, Philip Gladstone, Luis Ortiz, Jim
-Boucher, Lee Crocker, Julian Minguillon, George Phillips, Davide Rossi,
-Ge' Weijers, and other members of the Independent JPEG Group.
+This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
+Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi,
+Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG
+Group.
 
 IJG is not affiliated with the official ISO JPEG standards committee.
 
@@ -126,7 +134,7 @@ with respect to this software, its quality, accuracy, merchantability, or
 fitness for a particular purpose.  This software is provided "AS IS", and you,
 its user, assume the entire risk as to its quality and accuracy.
 
-This software is copyright (C) 1991-1996, Thomas G. Lane.
+This software is copyright (C) 1991-1998, Thomas G. Lane.
 All Rights Reserved except as specified below.
 
 Permission is hereby granted to use, copy, modify, and distribute this
@@ -166,8 +174,11 @@ ansi2knr.c for full details.)  However, since ansi2knr.c is not needed as part
 of any program generated from the IJG code, this does not limit you more than
 the foregoing paragraphs do.
 
-The configuration script "configure" was produced with GNU Autoconf.  It
-is copyright by the Free Software Foundation but is freely distributable.
+The Unix configuration script "configure" was produced with GNU Autoconf.
+It is copyright by the Free Software Foundation but is freely distributable.
+The same holds for its supporting scripts (config.guess, config.sub,
+ltconfig, ltmain.sh).  Another support script, install-sh, is copyright
+by M.I.T. but is also freely distributable.
 
 It appears that the arithmetic coding option of the JPEG spec is covered by
 patents owned by IBM, AT&T, and Mitsubishi.  Hence arithmetic coding cannot
@@ -178,13 +189,12 @@ Huffman mode, it is unlikely that very many implementations will support it.)
 So far as we are aware, there are no patent restrictions on the remaining
 code.
 
-WARNING: Unisys has begun to enforce their patent on LZW compression against
-GIF encoders and decoders.  You will need a license from Unisys to use the
-included rdgif.c or wrgif.c files in a commercial or shareware application.
-At this time, Unisys is not enforcing their patent against freeware, so
-distribution of this package remains legal.  However, we intend to remove
-GIF support from the IJG package as soon as a suitable replacement format
-becomes reasonably popular.
+The IJG distribution formerly included code to read and write GIF files.
+To avoid entanglement with the Unisys LZW patent, GIF reading support has
+been removed altogether, and the GIF writer has been simplified to produce
+"uncompressed GIFs".  This technique does not use the LZW algorithm; the
+resulting GIF files are larger than usual, but are readable by all standard
+GIF decoders.
 
 We are required to state that
     "The Graphics Interchange Format(c) is the Copyright property of
@@ -203,21 +213,21 @@ The best short technical introduction to the JPEG compression algorithm is
 	Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
 (Adjacent articles in that issue discuss MPEG motion picture compression,
 applications of JPEG, and related topics.)  If you don't have the CACM issue
-handy, a PostScript file containing a revised version of Wallace's article
-is available at ftp.uu.net, graphics/jpeg/wallace.ps.gz.  The file (actually
+handy, a PostScript file containing a revised version of Wallace's article is
+available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz.  The file (actually
 a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
 omits the sample images that appeared in CACM, but it includes corrections
-and some added material.  Note: the Wallace article is copyright ACM and
-IEEE, and it may not be used for commercial purposes.
+and some added material.  Note: the Wallace article is copyright ACM and IEEE,
+and it may not be used for commercial purposes.
 
 A somewhat less technical, more leisurely introduction to JPEG can be found in
-"The Data Compression Book" by Mark Nelson, published by M&T Books (Redwood
-City, CA), 1991, ISBN 1-55851-216-0.  This book provides good explanations and
-example C code for a multitude of compression methods including JPEG.  It is
-an excellent source if you are comfortable reading C code but don't know much
-about data compression in general.  The book's JPEG sample code is far from
-industrial-strength, but when you are ready to look at a full implementation,
-you've got one here...
+"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by
+M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1.  This book provides
+good explanations and example C code for a multitude of compression methods
+including JPEG.  It is an excellent source if you are comfortable reading C
+code but don't know much about data compression in general.  The book's JPEG
+sample code is far from industrial-strength, but when you are ready to look
+at a full implementation, you've got one here...
 
 The best full description of JPEG is the textbook "JPEG Still Image Data
 Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
@@ -242,10 +252,9 @@ Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
 Continuous-tone Still Images, Part 2: Compliance testing" and has document
 numbers ISO/IEC IS 10918-2, ITU-T T.83.
 
-Extensions to the original JPEG standard are defined in JPEG Part 3, a new ISO
-document.  Part 3 is undergoing ISO balloting and is expected to be approved
-by the end of 1995; it will have document numbers ISO/IEC IS 10918-3, ITU-T
-T.84.  IJG currently does not support any Part 3 extensions.
+Some extensions to the original JPEG standard are defined in JPEG Part 3,
+a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84.  IJG
+currently does not support any Part 3 extensions.
 
 The JPEG standard does not specify all details of an interchangeable file
 format.  For the omitted details we follow the "JFIF" conventions, revision
@@ -255,24 +264,22 @@ format.  For the omitted details we follow the "JFIF" conventions, revision
 	1778 McCarthy Blvd.
 	Milpitas, CA 95035
 	phone (408) 944-6300,  fax (408) 944-6314
-A PostScript version of this document is available at ftp.uu.net, file
-graphics/jpeg/jfif.ps.gz.  It can also be obtained by e-mail from the C-Cube
-mail server, netlib@c3.pla.ca.us.  Send the message "send jfif_ps from jpeg"
-to the server to obtain the JFIF document; send the message "help" if you have
-trouble.
+A PostScript version of this document is available by FTP at
+ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz.  There is also a plain text
+version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing
+the figures.
 
-The TIFF 6.0 file format specification can be obtained by FTP from sgi.com
-(192.48.153.1), file graphics/tiff/TIFF6.ps.Z; or you can order a printed
-copy from Aldus Corp. at (206) 628-6593.  The JPEG incorporation scheme
+The TIFF 6.0 file format specification can be obtained by FTP from
+ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
 found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
 IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
 Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
-(Compression tag 7).  Copies of this Note can be obtained from sgi.com or
-from ftp.uu.net:/graphics/jpeg/.  It is expected that the next revision of
-the TIFF spec will replace the 6.0 JPEG design with the Note's design.
+(Compression tag 7).  Copies of this Note can be obtained from ftp.sgi.com or
+from ftp://ftp.uu.net/graphics/jpeg/.  It is expected that the next revision
+of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
 Although IJG's own code does not support TIFF/JPEG, the free libtiff library
 uses our library to implement TIFF/JPEG per the Note.  libtiff is available
-from sgi.com:/graphics/tiff/.
+from ftp://ftp.sgi.com/graphics/tiff/.
 
 
 ARCHIVE LOCATIONS
@@ -281,26 +288,27 @@ ARCHIVE LOCATIONS
 The "official" archive site for this software is ftp.uu.net (Internet
 address 192.48.96.9).  The most recent released version can always be found
 there in directory graphics/jpeg.  This particular version will be archived
-as graphics/jpeg/jpegsrc.v6a.tar.gz.  If you are on the Internet, you
-can retrieve files from ftp.uu.net by standard anonymous FTP.  If you don't
-have FTP access, UUNET's archives are also available via UUCP; contact
+as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz.  If you don't have
+direct Internet access, UUNET's archives are also available via UUCP; contact
 help@uunet.uu.net for information on retrieving files that way.
 
 Numerous Internet sites maintain copies of the UUNET files.  However, only
 ftp.uu.net is guaranteed to have the latest official version.
 
 You can also obtain this software in DOS-compatible "zip" archive format from
-the SimTel archives (ftp.coast.net:/SimTel/msdos/graphics/), or on CompuServe
-in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 "JPEG Tools".
-Again, these versions may sometimes lag behind the ftp.uu.net release.
+the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
+on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12
+"JPEG Tools".  Again, these versions may sometimes lag behind the ftp.uu.net
+release.
 
 The JPEG FAQ (Frequently Asked Questions) article is a useful source of
 general information about JPEG.  It is updated constantly and therefore is
 not included in this distribution.  The FAQ is posted every two weeks to
 Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
-You can always obtain the latest version from the news.answers archive at
-rtfm.mit.edu.  By FTP, fetch /pub/usenet/news.answers/jpeg-faq/part1 and
-.../part2.  If you don't have FTP, send e-mail to mail-server@rtfm.mit.edu
+It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
+and other news.answers archive sites, including the official news.answers
+archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
+If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu
 with body
 	send usenet/news.answers/jpeg-faq/part1
 	send usenet/news.answers/jpeg-faq/part2
@@ -315,21 +323,20 @@ some of the more popular free and shareware viewers, and tells where to
 obtain them on Internet.
 
 If you are on a Unix machine, we highly recommend Jef Poskanzer's free
-PBMPLUS image software, which provides many useful operations on PPM-format
-image files.  In particular, it can convert PPM images to and from a wide
-range of other formats.  You can obtain this package by FTP from ftp.x.org
-(contrib/pbmplus*.tar.Z) or ftp.ee.lbl.gov (pbmplus*.tar.Z).  There is also
-a newer update of this package called NETPBM, available from
-wuarchive.wustl.edu under directory /graphics/graphics/packages/NetPBM/.
-Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software
-is; you are likely to have difficulty making it work on any non-Unix machine.
+PBMPLUS software, which provides many useful operations on PPM-format image
+files.  In particular, it can convert PPM images to and from a wide range of
+other formats, thus making cjpeg/djpeg considerably more useful.  The latest
+version is distributed by the NetPBM group, and is available from numerous
+sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
+Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is;
+you are likely to have difficulty making it work on any non-Unix machine.
 
 A different free JPEG implementation, written by the PVRG group at Stanford,
-is available from havefun.stanford.edu in directory pub/jpeg.  This program
+is available from ftp://havefun.stanford.edu/pub/jpeg/.  This program
 is designed for research and experimentation rather than production use;
 it is slower, harder to use, and less portable than the IJG code, but it
 is easier to read and modify.  Also, the PVRG code supports lossless JPEG,
-which we do not.
+which we do not.  (On the other hand, it doesn't do progressive JPEG.)
 
 
 FILE FORMAT WARS
@@ -370,14 +377,16 @@ use a proprietary file format!
 TO DO
 =====
 
+The major thrust for v7 will probably be improvement of visual quality.
+The current method for scaling the quantization tables is known not to be
+very good at low Q values.  We also intend to investigate block boundary
+smoothing, "poor man's variable quantization", and other means of improving
+quality-vs-file-size performance without sacrificing compatibility.
+
 In future versions, we are considering supporting some of the upcoming JPEG
 Part 3 extensions --- principally, variable quantization and the SPIFF file
 format.
 
-Tuning the software for better behavior at low quality/high compression
-settings is also of interest.  The current method for scaling the
-quantization tables is known not to be very good at low Q values.
-
-As always, speeding things up is high on our priority list.
+As always, speeding things up is of great interest.
 
 Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net.

README-turbo.txt

@@ -0,0 +1,196 @@
+*******************************************************************************
+**     Background
+*******************************************************************************
+
+libjpeg-turbo is a high-speed version of libjpeg for x86 and x86-64 processors
+which uses SIMD instructions (MMX, SSE2, etc.) to accelerate baseline JPEG
+compression and decompression.  libjpeg-turbo is generally 2-4x as fast
+as the unmodified version of libjpeg, all else being equal.
+
+libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but
+the TigerVNC and VirtualGL projects made numerous enhancements to the codec,
+including improved support for Mac OS X, 64-bit support, support for 32-bit
+and big endian pixel formats, accelerated Huffman encoding/decoding, and
+various bug fixes.  The goal was to produce a fully open source codec that
+could replace the partially closed source TurboJPEG/IPP codec used by VirtualGL
+and TurboVNC.  libjpeg-turbo generally performs in the range of 80-120% of
+TurboJPEG/IPP.  It is faster in some areas but slower in others.
+
+It was decided to split libjpeg-turbo into a separate SDK so that other
+projects could take advantage of this technology.  The libjpeg-turbo shared
+libraries can be used as drop-in replacements for libjpeg on most systems.
+
+
+*******************************************************************************
+**     License
+*******************************************************************************
+
+Some of the optimizations to the Huffman encoder/decoder were borrowed from
+VirtualGL, and thus the libjpeg-turbo distribution, as a whole, falls under the
+wxWindows Library Licence, Version 3.1.  A copy of this license can be found in
+this directory under LICENSE.txt.  The rest of the source code, apart from
+these modifications, falls under a less restrictive license (see README.)
+
+
+*******************************************************************************
+**     Using libjpeg-turbo
+*******************************************************************************
+
+=============================
+Replacing libjpeg at Run Time
+=============================
+
+If a Unix application is dynamically linked with libjpeg, then you can replace
+libjpeg with libjpeg-turbo at run time by manipulating the LD_LIBRARY_PATH.
+For instance:
+
+  [Using libjpeg]
+  > time cjpeg <vgl_5674_0098.ppm >vgl_5674_0098.jpg
+  real  0m0.392s
+  user  0m0.074s
+  sys   0m0.020s
+
+  [Using libjpeg-turbo]
+  > export LD_LIBRARY_PATH=/opt/libjpeg-turbo/{lib}:$LD_LIBRARY_PATH
+  > time cjpeg <vgl_5674_0098.ppm >vgl_5674_0098.jpg
+  real  0m0.109s
+  user  0m0.029s
+  sys   0m0.010s
+
+NOTE: {lib} can be lib, lib32, lib64, or lib/amd64, depending on the O/S and
+architecture.
+
+System administrators can also replace the libjpeg sym links in /usr/{lib} with
+links to the libjpeg dynamic library located in /opt/libjpeg-turbo/{lib}.  This
+will effectively accelerate every dynamically linked libjpeg application on the
+system.
+
+The Windows distribution of the libjpeg-turbo SDK installs jpeg62.dll into
+c:\libjpeg-turbo\bin, and the PATH environment variable can be modified such
+that this directory is searched before any others that might contain
+jpeg62.dll.  However, if jpeg62.dll also exists in an application's install
+directory, then Windows will load the application's version of it first.  Thus,
+if an application ships with jpeg62.dll, then back up the application's version
+of jpeg62.dll and copy c:\libjpeg-turbo\bin\jpeg62.dll into the application's
+install directory to accelerate it.
+
+The version of jpeg62.dll distributed in the libjpeg-turbo SDK requires the
+Visual C++ 2008 C run time DLL (msvcr90.dll).  This library ships with more
+recent versions of Windows, but users of older versions can obtain it from the
+Visual C++ 2008 Redistributable Package, which is available as a free download
+from Microsoft's web site.
+
+NOTE:  Features of libjpeg which require passing a C run time structure, such
+as a file handle, from an application to libjpeg will probably not work with
+the distributed version of jpeg62.dll unless the application is also built to
+use the Visual C++ 2008 C run time DLL.  In particular, this affects
+jpeg_stdio_dest() and jpeg_stdio_src().
+
+Mac applications typically embed their own copies of libjpeg.62.dylib inside
+the (hidden) application bundle, so it is not possible to globally replace
+libjpeg on OS X systems.  If an application uses a shared library version of
+libjpeg, then it may be possible to replace the application's version of it.
+This would generally involve copying libjpeg.62.dylib into the appropriate
+place in the application bundle and using install_name_tool to repoint the
+dylib to the new directory.  This requires an advanced knowledge of OS X and
+would not survive an upgrade or a re-install of the application.  Thus, it is
+not recommended for most users.
+
+=======================
+Replacing TurboJPEG/IPP
+=======================
+
+libjpeg-turbo is a drop-in replacement for the TurboJPEG/IPP SDK used by
+VirtualGL 2.1.x (and prior) and TurboVNC.  libjpeg-turbo contains a wrapper
+library (TurboJPEG/OSS) that emulates the TurboJPEG API using libjpeg-turbo
+instead of the closed source Intel Performance Primitives.  You can replace the
+TurboJPEG/IPP package on Linux systems with the libjpeg-turbo package in order
+to make existing releases of VirtualGL 2.1.x and TurboVNC use the new codec at
+run time.  Note that the 64-bit libjpeg-turbo packages contain only 64-bit
+binaries, whereas the TurboJPEG/IPP 64-bit packages contain both 64-bit and
+32-bit binaries.  Thus, to replace a TurboJPEG/IPP 64-bit package, install
+both the 64-bit and 32-bit versions of libjpeg-turbo.
+
+You can also build the VirtualGL 2.1.x and TurboVNC source code with
+the libjpeg-turbo SDK instead of TurboJPEG/IPP.  It should work identically.
+libjpeg-turbo also includes static library versions of TurboJPEG/OSS, which
+are used to build VirtualGL 2.2 and later.
+
+========================================
+Using libjpeg-turbo in Your Own Programs
+========================================
+
+For the most part, libjpeg-turbo should work identically to libjpeg, so in
+most cases, an application can be built against libjpeg and then run against
+libjpeg-turbo.  On Unix systems, you can build against libjpeg-turbo instead
+of libjpeg by setting
+
+  CPATH=/opt/libjpeg-turbo/include
+  and
+  LIBRARY_PATH=/opt/libjpeg-turbo/{lib}
+
+({lib} = lib, lib32, lib64, or lib/amd64, as appropriate.)
+
+If using Cygwin, then set
+
+  CPATH=/cygdrive/c/libjpeg-turbo-gcc/include
+  and
+  LIBRARY_PATH=/cygdrive/c/libjpeg-turbo-gcc/lib
+
+If using MinGW, then set
+
+  CPATH=/c/libjpeg-turbo-gcc/include
+  and
+  LIBRARY_PATH=/c/libjpeg-turbo-gcc/lib
+
+Building against libjpeg-turbo is useful, for instance, if you want to build an
+application that leverages the libjpeg-turbo colorspace extensions (see below.)
+On Linux and Solaris systems, you would still need to manipulate the
+LD_LIBRARY_PATH or sym links appropriately to use libjpeg-turbo at run time.
+On such systems, you can pass -R /opt/libjpeg-turbo/{lib} to the linker to
+force the use of libjpeg-turbo at run time rather than libjpeg (also useful if
+you want to leverage the colorspace extensions), or you can link against the
+libjpeg-turbo static library.
+
+To force a Linux, Solaris, or MinGW application to link against the static
+version of libjpeg-turbo, you can use the following linker options:
+
+  -Wl,-Bstatic -ljpeg -Wl,-Bdynamic
+
+On OS X, simply add /opt/libjpeg-turbo/{lib}/libjpeg.a to the linker command
+line (this also works on Linux and Solaris.)
+
+To build Visual C++ applications using libjpeg-turbo, add
+c:\libjpeg-turbo\include to your system or user INCLUDE environment variable
+and c:\libjpeg-turbo\lib to your system or user LIB environment variable, and
+then link against either jpeg.lib (to use jpeg62.dll) or jpeg-static.lib (to
+use the static version of libjpeg-turbo.)
+
+=====================
+Colorspace Extensions
+=====================
+
+libjpeg-turbo includes extensions which allow JPEG images to be compressed
+directly from (and decompressed directly to) buffers which use BGR, BGRA,
+RGBA, ABGR, and ARGB pixel ordering.  This is implemented with six new
+colorspace constants:
+
+  JCS_EXT_RGB   /* red/green/blue */
+  JCS_EXT_RGBX  /* red/green/blue/x */
+  JCS_EXT_BGR   /* blue/green/red */
+  JCS_EXT_BGRX  /* blue/green/red/x */
+  JCS_EXT_XBGR  /* x/blue/green/red */
+  JCS_EXT_XRGB  /* x/red/green/blue */
+
+Setting cinfo.in_color_space (compression) or cinfo.out_color_space
+(decompression) to one of these values will cause libjpeg-turbo to read the
+red, green, and blue values from (or write them to) the appropriate position in
+the pixel when YUV conversion is performed.
+
+Your application can check for the existence of these extensions at compile
+time with:
+
+  #ifdef JCS_EXTENSIONS
+
+At run time, attempting to use these extensions with a version of libjpeg
+that doesn't support them will result in a "Bogus input colorspace" error.

acinclude.m4

@@ -0,0 +1,129 @@
+# AC_PROG_NASM
+# --------------------------
+# Check that NASM exists and determine flags
+AC_DEFUN([AC_PROG_NASM],[
+
+AC_CHECK_PROGS(NASM, [nasm nasmw])
+test -z "$NASM" && AC_MSG_ERROR([no nasm (Netwide Assembler) found])
+
+AC_MSG_CHECKING([for object file format of host system])
+case "$host_os" in
+  cygwin* | mingw* | pw32* | interix*)
+    case "$host_cpu" in
+      x86_64)
+        objfmt='Win64-COFF'
+        ;;
+      *)
+        objfmt='Win32-COFF'
+        ;;
+    esac
+  ;;
+  msdosdjgpp* | go32*)
+    objfmt='COFF'
+  ;;
+  os2-emx*)			# not tested
+    objfmt='MSOMF'		# obj
+  ;;
+  linux*coff* | linux*oldld*)
+    objfmt='COFF'		# ???
+  ;;
+  linux*aout*)
+    objfmt='a.out'
+  ;;
+  linux*)
+    case "$host_cpu" in
+      x86_64)
+        objfmt='ELF64'
+        ;;
+      *)
+        objfmt='ELF'
+        ;;
+    esac
+  ;;
+  freebsd* | netbsd* | openbsd*)
+    if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
+      objfmt='BSD-a.out'
+    else
+      objfmt='ELF'
+    fi
+  ;;
+  solaris* | sunos* | sysv* | sco*)
+    case "$host_cpu" in
+      x86_64)
+        objfmt='ELF64'
+        ;;
+      *)
+        objfmt='ELF'
+        ;;
+    esac
+  ;;
+  darwin* | rhapsody* | nextstep* | openstep* | macos*)
+    case "$host_cpu" in
+      x86_64)
+        objfmt='Mach-O64'
+        ;;
+      *)
+        objfmt='Mach-O'
+        ;;
+    esac
+  ;;
+  *)
+    objfmt='ELF ?'
+  ;;
+esac
+
+AC_MSG_RESULT([$objfmt])
+if test "$objfmt" = 'ELF ?'; then
+  objfmt='ELF'
+  AC_MSG_WARN([unexpected host system. assumed that the format is $objfmt.])
+fi
+
+AC_MSG_CHECKING([for object file format specifier (NAFLAGS) ])
+case "$objfmt" in
+  MSOMF)      NAFLAGS='-fobj -DOBJ32';;
+  Win32-COFF) NAFLAGS='-fwin32 -DWIN32';;
+  Win64-COFF) NAFLAGS='-fwin64 -DWIN64 -D__x86_64__';;
+  COFF)       NAFLAGS='-fcoff -DCOFF';;
+  a.out)      NAFLAGS='-faout -DAOUT';;
+  BSD-a.out)  NAFLAGS='-faoutb -DAOUT';;
+  ELF)        NAFLAGS='-felf -DELF';;
+  ELF64)      NAFLAGS='-felf64 -DELF -D__x86_64__';;
+  RDF)        NAFLAGS='-frdf -DRDF';;
+  Mach-O)     NAFLAGS='-fmacho -DMACHO';;
+  Mach-O64)   NAFLAGS='-fmacho64 -DMACHO -D__x86_64__';;
+esac
+AC_MSG_RESULT([$NAFLAGS])
+AC_SUBST([NAFLAGS])
+
+AC_MSG_CHECKING([whether the assembler ($NASM $NAFLAGS) works])
+cat > conftest.asm <<EOF
+[%line __oline__ "configure"
+        section .text
+        global  _main,main
+_main:
+main:   xor     eax,eax
+        ret
+]EOF
+try_nasm='$NASM $NAFLAGS -o conftest.o conftest.asm'
+if AC_TRY_EVAL(try_nasm) && test -s conftest.o; then
+  AC_MSG_RESULT(yes)
+else
+  echo "configure: failed program was:" >&AC_FD_CC
+  cat conftest.asm >&AC_FD_CC
+  rm -rf conftest*
+  AC_MSG_RESULT(no)
+  AC_MSG_ERROR([installation or configuration problem: assembler cannot create object files.])
+fi
+
+AC_MSG_CHECKING([whether the linker accepts assembler output])
+try_nasm='${CC-cc} -o conftest${ac_exeext} $LDFLAGS conftest.o $LIBS 1>&AC_FD_CC'
+if AC_TRY_EVAL(try_nasm) && test -s conftest${ac_exeext}; then
+  rm -rf conftest*
+  AC_MSG_RESULT(yes)
+else
+  rm -rf conftest*
+  AC_MSG_RESULT(no)
+  AC_MSG_ERROR([configuration problem: maybe object file format mismatch.])
+fi
+
+])

ansi2knr.1

@@ -1,36 +0,0 @@
-.TH ANSI2KNR 1 "19 Jan 1996"
-.SH NAME
-ansi2knr \- convert ANSI C to Kernighan & Ritchie C
-.SH SYNOPSIS
-.I ansi2knr
-[--varargs] input_file [output_file]
-.SH DESCRIPTION
-If no output_file is supplied, output goes to stdout.
-.br
-There are no error messages.
-.sp
-.I ansi2knr
-recognizes function definitions by seeing a non-keyword identifier at the left
-margin, followed by a left parenthesis, with a right parenthesis as the last
-character on the line, and with a left brace as the first token on the
-following line (ignoring possible intervening comments).  It will recognize a
-multi-line header provided that no intervening line ends with a left or right
-brace or a semicolon.  These algorithms ignore whitespace and comments, except
-that the function name must be the first thing on the line.
-.sp
-The following constructs will confuse it:
-.br
-     - Any other construct that starts at the left margin and follows the
-above syntax (such as a macro or function call).
-.br
-     - Some macros that tinker with the syntax of the function header.
-.sp
-The --varargs switch is obsolete, and is recognized only for
-backwards compatibility.  The present version of
-.I ansi2knr
-will always attempt to convert a ... argument to va_alist and va_dcl.
-.SH AUTHOR
-L. Peter Deutsch <ghost@aladdin.com> wrote the original ansi2knr and
-continues to maintain the current version; most of the code in the current
-version is his work.  ansi2knr also includes contributions by Francois
-Pinard <pinard@iro.umontreal.ca> and Jim Avera <jima@netcom.com>.

ansi2knr.c

@@ -1,693 +0,0 @@
-/* ansi2knr.c */
-/* Convert ANSI C function definitions to K&R ("traditional C") syntax */
-
-/*
-ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY
-WARRANTY.  No author or distributor accepts responsibility to anyone for the
-consequences of using it or for whether it serves any particular purpose or
-works at all, unless he says so in writing.  Refer to the GNU General Public
-License (the "GPL") for full details.
-
-Everyone is granted permission to copy, modify and redistribute ansi2knr,
-but only under the conditions described in the GPL.  A copy of this license
-is supposed to have been given to you along with ansi2knr so you can know
-your rights and responsibilities.  It should be in a file named COPYLEFT.
-[In the IJG distribution, the GPL appears below, not in a separate file.]
-Among other things, the copyright notice and this notice must be preserved
-on all copies.
-
-We explicitly state here what we believe is already implied by the GPL: if
-the ansi2knr program is distributed as a separate set of sources and a
-separate executable file which are aggregated on a storage medium together
-with another program, this in itself does not bring the other program under
-the GPL, nor does the mere fact that such a program or the procedures for
-constructing it invoke the ansi2knr executable bring any other part of the
-program under the GPL.
-*/
-
-/*
----------- Here is the GNU GPL file COPYLEFT, referred to above ----------
------ These terms do NOT apply to the JPEG software itself; see README ------
-
-		    GHOSTSCRIPT GENERAL PUBLIC LICENSE
-		    (Clarified 11 Feb 1988)
-
- Copyright (C) 1988 Richard M. Stallman
- Everyone is permitted to copy and distribute verbatim copies of this
- license, but changing it is not allowed.  You can also use this wording
- to make the terms for other programs.
-
-  The license agreements of most software companies keep you at the
-mercy of those companies.  By contrast, our general public license is
-intended to give everyone the right to share Ghostscript.  To make sure
-that you get the rights we want you to have, we need to make
-restrictions that forbid anyone to deny you these rights or to ask you
-to surrender the rights.  Hence this license agreement.
-
-  Specifically, we want to make sure that you have the right to give
-away copies of Ghostscript, that you receive source code or else can get
-it if you want it, that you can change Ghostscript or use pieces of it
-in new free programs, and that you know you can do these things.
-
-  To make sure that everyone has such rights, we have to forbid you to
-deprive anyone else of these rights.  For example, if you distribute
-copies of Ghostscript, you must give the recipients all the rights that
-you have.  You must make sure that they, too, receive or can get the
-source code.  And you must tell them their rights.
-
-  Also, for our own protection, we must make certain that everyone finds
-out that there is no warranty for Ghostscript.  If Ghostscript is
-modified by someone else and passed on, we want its recipients to know
-that what they have is not what we distributed, so that any problems
-introduced by others will not reflect on our reputation.
-
-  Therefore we (Richard M. Stallman and the Free Software Foundation,
-Inc.) make the following terms which say what you must do to be allowed
-to distribute or change Ghostscript.
-
-
-			COPYING POLICIES
-
-  1. You may copy and distribute verbatim copies of Ghostscript source
-code as you receive it, in any medium, provided that you conspicuously
-and appropriately publish on each copy a valid copyright and license
-notice "Copyright (C) 1989 Aladdin Enterprises.  All rights reserved.
-Distributed by Free Software Foundation, Inc." (or with whatever year is
-appropriate); keep intact the notices on all files that refer to this
-License Agreement and to the absence of any warranty; and give any other
-recipients of the Ghostscript program a copy of this License Agreement
-along with the program.  You may charge a distribution fee for the
-physical act of transferring a copy.
-
-  2. You may modify your copy or copies of Ghostscript or any portion of
-it, and copy and distribute such modifications under the terms of
-Paragraph 1 above, provided that you also do the following:
-
-    a) cause the modified files to carry prominent notices stating
-    that you changed the files and the date of any change; and
-
-    b) cause the whole of any work that you distribute or publish,
-    that in whole or in part contains or is a derivative of Ghostscript
-    or any part thereof, to be licensed at no charge to all third
-    parties on terms identical to those contained in this License
-    Agreement (except that you may choose to grant more extensive
-    warranty protection to some or all third parties, at your option).
-
-    c) You may charge a distribution fee for the physical act of
-    transferring a copy, and you may at your option offer warranty
-    protection in exchange for a fee.
-
-Mere aggregation of another unrelated program with this program (or its
-derivative) on a volume of a storage or distribution medium does not bring
-the other program under the scope of these terms.
-
-  3. You may copy and distribute Ghostscript (or a portion or derivative
-of it, under Paragraph 2) in object code or executable form under the
-terms of Paragraphs 1 and 2 above provided that you also do one of the
-following:
-
-    a) accompany it with the complete corresponding machine-readable
-    source code, which must be distributed under the terms of
-    Paragraphs 1 and 2 above; or,
-
-    b) accompany it with a written offer, valid for at least three
-    years, to give any third party free (except for a nominal
-    shipping charge) a complete machine-readable copy of the
-    corresponding source code, to be distributed under the terms of
-    Paragraphs 1 and 2 above; or,
-
-    c) accompany it with the information you received as to where the
-    corresponding source code may be obtained.  (This alternative is
-    allowed only for noncommercial distribution and only if you
-    received the program in object code or executable form alone.)
-
-For an executable file, complete source code means all the source code for
-all modules it contains; but, as a special exception, it need not include
-source code for modules which are standard libraries that accompany the
-operating system on which the executable file runs.
-
-  4. You may not copy, sublicense, distribute or transfer Ghostscript
-except as expressly provided under this License Agreement.  Any attempt
-otherwise to copy, sublicense, distribute or transfer Ghostscript is
-void and your rights to use the program under this License agreement
-shall be automatically terminated.  However, parties who have received
-computer software programs from you with this License Agreement will not
-have their licenses terminated so long as such parties remain in full
-compliance.
-
-  5. If you wish to incorporate parts of Ghostscript into other free
-programs whose distribution conditions are different, write to the Free
-Software Foundation at 675 Mass Ave, Cambridge, MA 02139.  We have not
-yet worked out a simple rule that can be stated here, but we will often
-permit this.  We will be guided by the two goals of preserving the free
-status of all derivatives of our free software and of promoting the
-sharing and reuse of software.
-
-Your comments and suggestions about our licensing policies and our
-software are welcome!  Please contact the Free Software Foundation,
-Inc., 675 Mass Ave, Cambridge, MA 02139, or call (617) 876-3296.
-
-		       NO WARRANTY
-
-  BECAUSE GHOSTSCRIPT IS LICENSED FREE OF CHARGE, WE PROVIDE ABSOLUTELY
-NO WARRANTY, TO THE EXTENT PERMITTED BY APPLICABLE STATE LAW.  EXCEPT
-WHEN OTHERWISE STATED IN WRITING, FREE SOFTWARE FOUNDATION, INC, RICHARD
-M. STALLMAN, ALADDIN ENTERPRISES, L. PETER DEUTSCH, AND/OR OTHER PARTIES
-PROVIDE GHOSTSCRIPT "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
-EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE
-ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF GHOSTSCRIPT IS WITH
-YOU.  SHOULD GHOSTSCRIPT PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL
-NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW WILL RICHARD M.
-STALLMAN, THE FREE SOFTWARE FOUNDATION, INC., L. PETER DEUTSCH, ALADDIN
-ENTERPRISES, AND/OR ANY OTHER PARTY WHO MAY MODIFY AND REDISTRIBUTE
-GHOSTSCRIPT AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING
-ANY LOST PROFITS, LOST MONIES, OR OTHER SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE
-(INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED
-INACCURATE OR LOSSES SUSTAINED BY THIRD PARTIES OR A FAILURE OF THE
-PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS) GHOSTSCRIPT, EVEN IF YOU
-HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM
-BY ANY OTHER PARTY.
-
--------------------- End of file COPYLEFT ------------------------------
-*/
-
-/*
- * Usage:
-	ansi2knr input_file [output_file]
- * If no output_file is supplied, output goes to stdout.
- * There are no error messages.
- *
- * ansi2knr recognizes function definitions by seeing a non-keyword
- * identifier at the left margin, followed by a left parenthesis,
- * with a right parenthesis as the last character on the line,
- * and with a left brace as the first token on the following line
- * (ignoring possible intervening comments).
- * It will recognize a multi-line header provided that no intervening
- * line ends with a left or right brace or a semicolon.
- * These algorithms ignore whitespace and comments, except that
- * the function name must be the first thing on the line.
- * The following constructs will confuse it:
- *	- Any other construct that starts at the left margin and
- *	    follows the above syntax (such as a macro or function call).
- *	- Some macros that tinker with the syntax of the function header.
- */
-
-/*
- * The original and principal author of ansi2knr is L. Peter Deutsch
- * <ghost@aladdin.com>.  Other authors are noted in the change history
- * that follows (in reverse chronological order):
-	lpd 96-01-21 added code to cope with not HAVE_CONFIG_H and with
-		compilers that don't understand void, as suggested by
-		Tom Lane
-	lpd 96-01-15 changed to require that the first non-comment token
-		on the line following a function header be a left brace,
-		to reduce sensitivity to macros, as suggested by Tom Lane
-		<tgl@sss.pgh.pa.us>
-	lpd 95-06-22 removed #ifndefs whose sole purpose was to define
-		undefined preprocessor symbols as 0; changed all #ifdefs
-		for configuration symbols to #ifs
-	lpd 95-04-05 changed copyright notice to make it clear that
-		including ansi2knr in a program does not bring the entire
-		program under the GPL
-	lpd 94-12-18 added conditionals for systems where ctype macros
-		don't handle 8-bit characters properly, suggested by
-		Francois Pinard <pinard@iro.umontreal.ca>;
-		removed --varargs switch (this is now the default)
-	lpd 94-10-10 removed CONFIG_BROKETS conditional
-	lpd 94-07-16 added some conditionals to help GNU `configure',
-		suggested by Francois Pinard <pinard@iro.umontreal.ca>;
-		properly erase prototype args in function parameters,
-		contributed by Jim Avera <jima@netcom.com>;
-		correct error in writeblanks (it shouldn't erase EOLs)
-	lpd 89-xx-xx original version
- */
-
-/* Most of the conditionals here are to make ansi2knr work with */
-/* or without the GNU configure machinery. */
-
-#if HAVE_CONFIG_H
-# include <config.h>
-#endif
-
-#include <stdio.h>
-#include <ctype.h>
-
-#if HAVE_CONFIG_H
-
-/*
-   For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h).
-   This will define HAVE_CONFIG_H and so, activate the following lines.
- */
-
-# if STDC_HEADERS || HAVE_STRING_H
-#  include <string.h>
-# else
-#  include <strings.h>
-# endif
-
-#else /* not HAVE_CONFIG_H */
-
-/* Otherwise do it the hard way */
-
-# ifdef BSD
-#  include <strings.h>
-# else
-#  ifdef VMS
-    extern int strlen(), strncmp();
-#  else
-#   include <string.h>
-#  endif
-# endif
-
-#endif /* not HAVE_CONFIG_H */
-
-#if STDC_HEADERS
-# include <stdlib.h>
-#else
-/*
-   malloc and free should be declared in stdlib.h,
-   but if you've got a K&R compiler, they probably aren't.
- */
-# ifdef MSDOS
-#  include <malloc.h>
-# else
-#  ifdef VMS
-     extern char *malloc();
-     extern void free();
-#  else
-     extern char *malloc();
-     extern int free();
-#  endif
-# endif
-
-#endif
-
-/*
- * The ctype macros don't always handle 8-bit characters correctly.
- * Compensate for this here.
- */
-#ifdef isascii
-#  undef HAVE_ISASCII		/* just in case */
-#  define HAVE_ISASCII 1
-#else
-#endif
-#if STDC_HEADERS || !HAVE_ISASCII
-#  define is_ascii(c) 1
-#else
-#  define is_ascii(c) isascii(c)
-#endif
-
-#define is_space(c) (is_ascii(c) && isspace(c))
-#define is_alpha(c) (is_ascii(c) && isalpha(c))
-#define is_alnum(c) (is_ascii(c) && isalnum(c))
-
-/* Scanning macros */
-#define isidchar(ch) (is_alnum(ch) || (ch) == '_')
-#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_')
-
-/* Forward references */
-char *skipspace();
-int writeblanks();
-int test1();
-int convert1();
-
-/* The main program */
-int
-main(argc, argv)
-    int argc;
-    char *argv[];
-{	FILE *in, *out;
-#define bufsize 5000			/* arbitrary size */
-	char *buf;
-	char *line;
-	char *more;
-	/*
-	 * In previous versions, ansi2knr recognized a --varargs switch.
-	 * If this switch was supplied, ansi2knr would attempt to convert
-	 * a ... argument to va_alist and va_dcl; if this switch was not
-	 * supplied, ansi2knr would simply drop any such arguments.
-	 * Now, ansi2knr always does this conversion, and we only
-	 * check for this switch for backward compatibility.
-	 */
-	int convert_varargs = 1;
-
-	if ( argc > 1 && argv[1][0] == '-' )
-	  {	if ( !strcmp(argv[1], "--varargs") )
-		  {	convert_varargs = 1;
-			argc--;
-			argv++;
-		  }
-		else
-		  {	fprintf(stderr, "Unrecognized switch: %s\n", argv[1]);
-			exit(1);
-		  }
-	  }
-	switch ( argc )
-	   {
-	default:
-		printf("Usage: ansi2knr input_file [output_file]\n");
-		exit(0);
-	case 2:
-		out = stdout;
-		break;
-	case 3:
-		out = fopen(argv[2], "w");
-		if ( out == NULL )
-		   {	fprintf(stderr, "Cannot open output file %s\n", argv[2]);
-			exit(1);
-		   }
-	   }
-	in = fopen(argv[1], "r");
-	if ( in == NULL )
-	   {	fprintf(stderr, "Cannot open input file %s\n", argv[1]);
-		exit(1);
-	   }
-	fprintf(out, "#line 1 \"%s\"\n", argv[1]);
-	buf = malloc(bufsize);
-	line = buf;
-	while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL )
-	   {
-test:		line += strlen(line);
-		switch ( test1(buf) )
-		   {
-		case 2:			/* a function header */
-			convert1(buf, out, 1, convert_varargs);
-			break;
-		case 1:			/* a function */
-			/* Check for a { at the start of the next line. */
-			more = ++line;
-f:			if ( line >= buf + (bufsize - 1) ) /* overflow check */
-			  goto wl;
-			if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL )
-			  goto wl;
-			switch ( *skipspace(more, 1) )
-			  {
-			  case '{':
-			    /* Definitely a function header. */
-			    convert1(buf, out, 0, convert_varargs);
-			    fputs(more, out);
-			    break;
-			  case 0:
-			    /* The next line was blank or a comment: */
-			    /* keep scanning for a non-comment. */
-			    line += strlen(line);
-			    goto f;
-			  default:
-			    /* buf isn't a function header, but */
-			    /* more might be. */
-			    fputs(buf, out);
-			    strcpy(buf, more);
-			    line = buf;
-			    goto test;
-			  }
-			break;
-		case -1:		/* maybe the start of a function */
-			if ( line != buf + (bufsize - 1) ) /* overflow check */
-			  continue;
-			/* falls through */
-		default:		/* not a function */
-wl:			fputs(buf, out);
-			break;
-		   }
-		line = buf;
-	   }
-	if ( line != buf )
-	  fputs(buf, out);
-	free(buf);
-	fclose(out);
-	fclose(in);
-	return 0;
-}
-
-/* Skip over space and comments, in either direction. */
-char *
-skipspace(p, dir)
-    register char *p;
-    register int dir;			/* 1 for forward, -1 for backward */
-{	for ( ; ; )
-	   {	while ( is_space(*p) )
-		  p += dir;
-		if ( !(*p == '/' && p[dir] == '*') )
-		  break;
-		p += dir;  p += dir;
-		while ( !(*p == '*' && p[dir] == '/') )
-		   {	if ( *p == 0 )
-			  return p;	/* multi-line comment?? */
-			p += dir;
-		   }
-		p += dir;  p += dir;
-	   }
-	return p;
-}
-
-/*
- * Write blanks over part of a string.
- * Don't overwrite end-of-line characters.
- */
-int
-writeblanks(start, end)
-    char *start;
-    char *end;
-{	char *p;
-	for ( p = start; p < end; p++ )
-	  if ( *p != '\r' && *p != '\n' )
-	    *p = ' ';
-	return 0;
-}
-
-/*
- * Test whether the string in buf is a function definition.
- * The string may contain and/or end with a newline.
- * Return as follows:
- *	0 - definitely not a function definition;
- *	1 - definitely a function definition;
- *	2 - definitely a function prototype (NOT USED);
- *	-1 - may be the beginning of a function definition,
- *		append another line and look again.
- * The reason we don't attempt to convert function prototypes is that
- * Ghostscript's declaration-generating macros look too much like
- * prototypes, and confuse the algorithms.
- */
-int
-test1(buf)
-    char *buf;
-{	register char *p = buf;
-	char *bend;
-	char *endfn;
-	int contin;
-
-	if ( !isidfirstchar(*p) )
-	  return 0;		/* no name at left margin */
-	bend = skipspace(buf + strlen(buf) - 1, -1);
-	switch ( *bend )
-	   {
-	   case ';': contin = 0 /*2*/; break;
-	   case ')': contin = 1; break;
-	   case '{': return 0;		/* not a function */
-	   case '}': return 0;		/* not a function */
-	   default: contin = -1;
-	   }
-	while ( isidchar(*p) )
-	  p++;
-	endfn = p;
-	p = skipspace(p, 1);
-	if ( *p++ != '(' )
-	  return 0;		/* not a function */
-	p = skipspace(p, 1);
-	if ( *p == ')' )
-	  return 0;		/* no parameters */
-	/* Check that the apparent function name isn't a keyword. */
-	/* We only need to check for keywords that could be followed */
-	/* by a left parenthesis (which, unfortunately, is most of them). */
-	   {	static char *words[] =
-		   {	"asm", "auto", "case", "char", "const", "double",
-			"extern", "float", "for", "if", "int", "long",
-			"register", "return", "short", "signed", "sizeof",
-			"static", "switch", "typedef", "unsigned",
-			"void", "volatile", "while", 0
-		   };
-		char **key = words;
-		char *kp;
-		int len = endfn - buf;
-
-		while ( (kp = *key) != 0 )
-		   {	if ( strlen(kp) == len && !strncmp(kp, buf, len) )
-			  return 0;	/* name is a keyword */
-			key++;
-		   }
-	   }
-	return contin;
-}
-
-/* Convert a recognized function definition or header to K&R syntax. */
-int
-convert1(buf, out, header, convert_varargs)
-    char *buf;
-    FILE *out;
-    int header;			/* Boolean */
-    int convert_varargs;	/* Boolean */
-{	char *endfn;
-	register char *p;
-	char **breaks;
-	unsigned num_breaks = 2;	/* for testing */
-	char **btop;
-	char **bp;
-	char **ap;
-	char *vararg = 0;
-
-	/* Pre-ANSI implementations don't agree on whether strchr */
-	/* is called strchr or index, so we open-code it here. */
-	for ( endfn = buf; *(endfn++) != '('; )
-	  ;
-top:	p = endfn;
-	breaks = (char **)malloc(sizeof(char *) * num_breaks * 2);
-	if ( breaks == 0 )
-	   {	/* Couldn't allocate break table, give up */
-		fprintf(stderr, "Unable to allocate break table!\n");
-		fputs(buf, out);
-		return -1;
-	   }
-	btop = breaks + num_breaks * 2 - 2;
-	bp = breaks;
-	/* Parse the argument list */
-	do
-	   {	int level = 0;
-		char *lp = NULL;
-		char *rp;
-		char *end = NULL;
-
-		if ( bp >= btop )
-		   {	/* Filled up break table. */
-			/* Allocate a bigger one and start over. */
-			free((char *)breaks);
-			num_breaks <<= 1;
-			goto top;
-		   }
-		*bp++ = p;
-		/* Find the end of the argument */
-		for ( ; end == NULL; p++ )
-		   {	switch(*p)
-			   {
-			   case ',':
-				if ( !level ) end = p;
-				break;
-			   case '(':
-				if ( !level ) lp = p;
-				level++;
-				break;
-			   case ')':
-				if ( --level < 0 ) end = p;
-				else rp = p;
-				break;
-			   case '/':
-				p = skipspace(p, 1) - 1;
-				break;
-			   default:
-				;
-			   }
-		   }
-		/* Erase any embedded prototype parameters. */
-		if ( lp )
-		  writeblanks(lp + 1, rp);
-		p--;			/* back up over terminator */
-		/* Find the name being declared. */
-		/* This is complicated because of procedure and */
-		/* array modifiers. */
-		for ( ; ; )
-		   {	p = skipspace(p - 1, -1);
-			switch ( *p )
-			   {
-			   case ']':	/* skip array dimension(s) */
-			   case ')':	/* skip procedure args OR name */
-			   {	int level = 1;
-				while ( level )
-				 switch ( *--p )
-				   {
-				   case ']': case ')': level++; break;
-				   case '[': case '(': level--; break;
-				   case '/': p = skipspace(p, -1) + 1; break;
-				   default: ;
-				   }
-			   }
-				if ( *p == '(' && *skipspace(p + 1, 1) == '*' )
-				   {	/* We found the name being declared */
-					while ( !isidfirstchar(*p) )
-					  p = skipspace(p, 1) + 1;
-					goto found;
-				   }
-				break;
-			   default:
-				goto found;
-			   }
-		   }
-found:		if ( *p == '.' && p[-1] == '.' && p[-2] == '.' )
-		  {	if ( convert_varargs )
-			  {	*bp++ = "va_alist";
-				vararg = p-2;
-			  }
-			else
-			  {	p++;
-				if ( bp == breaks + 1 )	/* sole argument */
-				  writeblanks(breaks[0], p);
-				else
-				  writeblanks(bp[-1] - 1, p);
-				bp--;
-			  }
-		   }
-		else
-		   {	while ( isidchar(*p) ) p--;
-			*bp++ = p+1;
-		   }
-		p = end;
-	   }
-	while ( *p++ == ',' );
-	*bp = p;
-	/* Make a special check for 'void' arglist */
-	if ( bp == breaks+2 )
-	   {	p = skipspace(breaks[0], 1);
-		if ( !strncmp(p, "void", 4) )
-		   {	p = skipspace(p+4, 1);
-			if ( p == breaks[2] - 1 )
-			   {	bp = breaks;	/* yup, pretend arglist is empty */
-				writeblanks(breaks[0], p + 1);
-			   }
-		   }
-	   }
-	/* Put out the function name and left parenthesis. */
-	p = buf;
-	while ( p != endfn ) putc(*p, out), p++;
-	/* Put out the declaration. */
-	if ( header )
-	  {	fputs(");", out);
-		for ( p = breaks[0]; *p; p++ )
-		  if ( *p == '\r' || *p == '\n' )
-		    putc(*p, out);
-	  }
-	else
-	  {	for ( ap = breaks+1; ap < bp; ap += 2 )
-		  {	p = *ap;
-			while ( isidchar(*p) )
-			  putc(*p, out), p++;
-			if ( ap < bp - 1 )
-			  fputs(", ", out);
-		  }
-		fputs(")  ", out);
-		/* Put out the argument declarations */
-		for ( ap = breaks+2; ap <= bp; ap += 2 )
-		  (*ap)[-1] = ';';
-		if ( vararg != 0 )
-		  {	*vararg = 0;
-			fputs(breaks[0], out);		/* any prior args */
-			fputs("va_dcl", out);		/* the final arg */
-			fputs(bp[0], out);
-		  }
-		else
-		  fputs(breaks[0], out);
-	  }
-	free((char *)breaks);
-	return 0;
-}

bmp.c

@@ -0,0 +1,370 @@
+/* Copyright (C)2004 Landmark Graphics Corporation
+ * Copyright (C)2005 Sun Microsystems, Inc.
+ *
+ * This library is free software and may be redistributed and/or modified under
+ * the terms of the wxWindows Library License, Version 3.1 or (at your option)
+ * any later version.  The full license is in the LICENSE.txt file included
+ * with this distribution.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * wxWindows Library License for more details.
+*/
+
+#include <fcntl.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <errno.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#ifdef _WIN32
+ #include <io.h>
+#else
+ #include <unistd.h>
+#endif
+#include "./rrutil.h"
+#include "./bmp.h"
+
+#ifndef BI_BITFIELDS
+#define BI_BITFIELDS 3L
+#endif
+#ifndef BI_RGB
+#define BI_RGB 0L
+#endif
+
+#define BMPHDRSIZE 54
+typedef struct _bmphdr
+{
+	unsigned short bfType;
+	unsigned int bfSize;
+	unsigned short bfReserved1, bfReserved2;
+	unsigned int bfOffBits;
+
+	unsigned int biSize;
+	int biWidth, biHeight;
+	unsigned short biPlanes, biBitCount;
+	unsigned int biCompression, biSizeImage;
+	int biXPelsPerMeter, biYPelsPerMeter;
+	unsigned int biClrUsed, biClrImportant;
+} bmphdr;
+
+static const char *__bmperr="No error";
+
+static const int ps[BMPPIXELFORMATS]={3, 4, 3, 4, 4, 4};
+static const int roffset[BMPPIXELFORMATS]={0, 0, 2, 2, 3, 1};
+static const int goffset[BMPPIXELFORMATS]={1, 1, 1, 1, 2, 2};
+static const int boffset[BMPPIXELFORMATS]={2, 2, 0, 0, 1, 3};
+
+#define _throw(m) {__bmperr=m;  retcode=-1;  goto finally;}
+#define _unix(f) {if((f)==-1) _throw(strerror(errno));}
+#define _catch(f) {if((f)==-1) {retcode=-1;  goto finally;}}
+
+#define readme(fd, addr, size) \
+	if((bytesread=read(fd, addr, (size)))==-1) _throw(strerror(errno)); \
+	if(bytesread!=(size)) _throw("Read error");
+
+void pixelconvert(unsigned char *srcbuf, enum BMPPIXELFORMAT srcformat,
+	int srcpitch, unsigned char *dstbuf, enum BMPPIXELFORMAT dstformat, int dstpitch,
+	int w, int h, int flip)
+{
+	unsigned char *srcptr, *srcptr0, *dstptr, *dstptr0;
+	int i, j;
+
+	srcptr=flip? &srcbuf[srcpitch*(h-1)]:srcbuf;
+	for(j=0, dstptr=dstbuf; j<h; j++,
+		srcptr+=flip? -srcpitch:srcpitch, dstptr+=dstpitch)
+	{
+		for(i=0, srcptr0=srcptr, dstptr0=dstptr; i<w; i++,
+			srcptr0+=ps[srcformat], dstptr0+=ps[dstformat])
+		{
+			dstptr0[roffset[dstformat]]=srcptr0[roffset[srcformat]];
+			dstptr0[goffset[dstformat]]=srcptr0[goffset[srcformat]];
+			dstptr0[boffset[dstformat]]=srcptr0[boffset[srcformat]];
+		}
+	}
+}
+
+int loadppm(int *fd, unsigned char **buf, int *w, int *h,
+	enum BMPPIXELFORMAT f, int align, int dstbottomup, int ascii)
+{
+	FILE *fs=NULL;  int retcode=0, scalefactor, dstpitch;
+	unsigned char *tempbuf=NULL;  char temps[255], temps2[255];
+	int numread=0, totalread=0, pixel[3], i, j;
+
+	if((fs=fdopen(*fd, "r"))==NULL) _throw(strerror(errno));
+
+	do
+	{
+		if(!fgets(temps, 255, fs)) _throw("Read error");
+		if(strlen(temps)==0 || temps[0]=='\n') continue;
+		if(sscanf(temps, "%s", temps2)==1 && temps2[1]=='#') continue;
+		switch(totalread)
+		{
+			case 0:
+				if((numread=sscanf(temps, "%d %d %d", w, h, &scalefactor))==EOF)
+					_throw("Read error");
+				break;
+			case 1:
+				if((numread=sscanf(temps, "%d %d", h, &scalefactor))==EOF)
+					_throw("Read error");
+				break;
+			case 2:
+				if((numread=sscanf(temps, "%d", &scalefactor))==EOF)
+					_throw("Read error");
+				break;
+		}
+		totalread+=numread;
+	} while(totalread<3);
+	if((*w)<1 || (*h)<1 || scalefactor<1) _throw("Corrupt PPM header");
+
+	dstpitch=(((*w)*ps[f])+(align-1))&(~(align-1));
+	if((*buf=(unsigned char *)malloc(dstpitch*(*h)))==NULL)
+		_throw("Memory allocation error");
+	if(ascii)
+	{
+		for(j=0; j<*h; j++)
+		{
+			for(i=0; i<*w; i++)
+			{
+				if(fscanf(fs, "%d%d%d", &pixel[0], &pixel[1], &pixel[2])!=3)
+					_throw("Read error");
+				(*buf)[j*dstpitch+i*ps[f]+roffset[f]]=(unsigned char)(pixel[0]*255/scalefactor);
+				(*buf)[j*dstpitch+i*ps[f]+goffset[f]]=(unsigned char)(pixel[1]*255/scalefactor);
+				(*buf)[j*dstpitch+i*ps[f]+boffset[f]]=(unsigned char)(pixel[2]*255/scalefactor);
+			}
+		}
+	}
+	else
+	{
+		if(scalefactor!=255)
+			_throw("Binary PPMs must have 8-bit components");
+		if((tempbuf=(unsigned char *)malloc((*w)*(*h)*3))==NULL)
+			_throw("Memory allocation error");
+		if(fread(tempbuf, (*w)*(*h)*3, 1, fs)!=1) _throw("Read error");
+		pixelconvert(tempbuf, BMP_RGB, (*w)*3, *buf, f, dstpitch, *w, *h, dstbottomup);
+	}
+
+	finally:
+	if(fs) {fclose(fs);  *fd=-1;}
+	if(tempbuf) free(tempbuf);
+	return retcode;
+}
+
+
+int loadbmp(char *filename, unsigned char **buf, int *w, int *h, 
+	enum BMPPIXELFORMAT f, int align, int dstbottomup)
+{
+	int fd=-1, bytesread, srcpitch, srcbottomup=1, srcps, dstpitch,
+		retcode=0;
+	unsigned char *tempbuf=NULL;
+	bmphdr bh;  int flags=O_RDONLY;
+
+	dstbottomup=dstbottomup? 1:0;
+	#ifdef _WIN32
+	flags|=O_BINARY;
+	#endif
+	if(!filename || !buf || !w || !h || f<0 || f>BMPPIXELFORMATS-1 || align<1)
+		_throw("invalid argument to loadbmp()");
+	if((align&(align-1))!=0)
+		_throw("Alignment must be a power of 2");
+	_unix(fd=open(filename, flags));
+
+	readme(fd, &bh.bfType, sizeof(unsigned short));
+	if(!littleendian())	bh.bfType=byteswap16(bh.bfType);
+
+	if(bh.bfType==0x3650)
+	{
+		_catch(loadppm(&fd, buf, w, h, f, align, dstbottomup, 0));
+		goto finally;
+	}
+	if(bh.bfType==0x3350)
+	{
+		_catch(loadppm(&fd, buf, w, h, f, align, dstbottomup, 1));
+		goto finally;
+	}
+
+	readme(fd, &bh.bfSize, sizeof(unsigned int));
+	readme(fd, &bh.bfReserved1, sizeof(unsigned short));
+	readme(fd, &bh.bfReserved2, sizeof(unsigned short));
+	readme(fd, &bh.bfOffBits, sizeof(unsigned int));
+	readme(fd, &bh.biSize, sizeof(unsigned int));
+	readme(fd, &bh.biWidth, sizeof(int));
+	readme(fd, &bh.biHeight, sizeof(int));
+	readme(fd, &bh.biPlanes, sizeof(unsigned short));
+	readme(fd, &bh.biBitCount, sizeof(unsigned short));
+	readme(fd, &bh.biCompression, sizeof(unsigned int));
+	readme(fd, &bh.biSizeImage, sizeof(unsigned int));
+	readme(fd, &bh.biXPelsPerMeter, sizeof(int));
+	readme(fd, &bh.biYPelsPerMeter, sizeof(int));
+	readme(fd, &bh.biClrUsed, sizeof(unsigned int));
+	readme(fd, &bh.biClrImportant, sizeof(unsigned int));
+
+	if(!littleendian())
+	{
+		bh.bfSize=byteswap(bh.bfSize);
+		bh.bfOffBits=byteswap(bh.bfOffBits);
+		bh.biSize=byteswap(bh.biSize);
+		bh.biWidth=byteswap(bh.biWidth);
+		bh.biHeight=byteswap(bh.biHeight);
+		bh.biPlanes=byteswap16(bh.biPlanes);
+		bh.biBitCount=byteswap16(bh.biBitCount);
+		bh.biCompression=byteswap(bh.biCompression);
+		bh.biSizeImage=byteswap(bh.biSizeImage);
+		bh.biXPelsPerMeter=byteswap(bh.biXPelsPerMeter);
+		bh.biYPelsPerMeter=byteswap(bh.biYPelsPerMeter);
+		bh.biClrUsed=byteswap(bh.biClrUsed);
+		bh.biClrImportant=byteswap(bh.biClrImportant);
+	}
+
+	if(bh.bfType!=0x4d42 || bh.bfOffBits<BMPHDRSIZE
+	|| bh.biWidth<1 || bh.biHeight==0)
+		_throw("Corrupt bitmap header");
+	if((bh.biBitCount!=24 && bh.biBitCount!=32) || bh.biCompression!=BI_RGB)
+		_throw("Only uncompessed RGB bitmaps are supported");
+
+	*w=bh.biWidth;  *h=bh.biHeight;  srcps=bh.biBitCount/8;
+	if(*h<0) {*h=-(*h);  srcbottomup=0;}
+	srcpitch=(((*w)*srcps)+3)&(~3);
+	dstpitch=(((*w)*ps[f])+(align-1))&(~(align-1));
+
+	if(srcpitch*(*h)+bh.bfOffBits!=bh.bfSize) _throw("Corrupt bitmap header");
+	if((tempbuf=(unsigned char *)malloc(srcpitch*(*h)))==NULL
+	|| (*buf=(unsigned char *)malloc(dstpitch*(*h)))==NULL)
+		_throw("Memory allocation error");
+	if(lseek(fd, (long)bh.bfOffBits, SEEK_SET)!=(long)bh.bfOffBits)
+		_throw(strerror(errno));
+	_unix(bytesread=read(fd, tempbuf, srcpitch*(*h)));
+	if(bytesread!=srcpitch*(*h)) _throw("Read error");
+
+	pixelconvert(tempbuf, BMP_BGR, srcpitch, *buf, f, dstpitch, *w, *h, 
+		srcbottomup!=dstbottomup);
+
+	finally:
+	if(tempbuf) free(tempbuf);
+	if(fd!=-1) close(fd);
+	return retcode;
+}
+
+#define writeme(fd, addr, size) \
+	if((byteswritten=write(fd, addr, (size)))==-1) _throw(strerror(errno)); \
+	if(byteswritten!=(size)) _throw("Write error");
+
+int saveppm(char *filename, unsigned char *buf, int w, int h,
+	enum BMPPIXELFORMAT f, int srcpitch, int srcbottomup)
+{
+	FILE *fs=NULL;  int retcode=0;
+	unsigned char *tempbuf=NULL;
+
+	if((fs=fopen(filename, "wb"))==NULL) _throw(strerror(errno));
+	if(fprintf(fs, "P6\n")<1) _throw("Write error");
+	if(fprintf(fs, "%d %d\n", w, h)<1) _throw("Write error");
+	if(fprintf(fs, "255\n")<1) _throw("Write error");
+
+	if((tempbuf=(unsigned char *)malloc(w*h*3))==NULL)
+		_throw("Memory allocation error");
+
+	pixelconvert(buf, f, srcpitch, tempbuf, BMP_RGB, w*3, w, h, 
+		srcbottomup);
+
+	if((fwrite(tempbuf, w*h*3, 1, fs))!=1) _throw("Write error");
+
+	finally:
+	if(tempbuf) free(tempbuf);
+	if(fs) fclose(fs);
+	return retcode;
+}
+
+int savebmp(char *filename, unsigned char *buf, int w, int h,
+	enum BMPPIXELFORMAT f, int srcpitch, int srcbottomup)
+{
+	int fd=-1, byteswritten, dstpitch, retcode=0;
+	int flags=O_RDWR|O_CREAT|O_TRUNC;
+	unsigned char *tempbuf=NULL;  char *temp;
+	bmphdr bh;  int mode;
+
+	#ifdef _WIN32
+	flags|=O_BINARY;  mode=_S_IREAD|_S_IWRITE;
+	#else
+	mode=S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH|S_IWOTH;
+	#endif
+	if(!filename || !buf || w<1 || h<1 || f<0 || f>BMPPIXELFORMATS-1 || srcpitch<0)
+		_throw("bad argument to savebmp()");
+
+	if(srcpitch==0) srcpitch=w*ps[f];
+
+	if((temp=strrchr(filename, '.'))!=NULL)
+	{
+		if(!stricmp(temp, ".ppm"))
+			return saveppm(filename, buf, w, h, f, srcpitch, srcbottomup);
+	}
+
+	_unix(fd=open(filename, flags, mode));
+	dstpitch=((w*3)+3)&(~3);
+
+	bh.bfType=0x4d42;
+	bh.bfSize=BMPHDRSIZE+dstpitch*h;
+	bh.bfReserved1=0;  bh.bfReserved2=0;
+	bh.bfOffBits=BMPHDRSIZE;
+	bh.biSize=40;
+	bh.biWidth=w;  bh.biHeight=h;
+	bh.biPlanes=0;  bh.biBitCount=24;
+	bh.biCompression=BI_RGB;  bh.biSizeImage=0;
+	bh.biXPelsPerMeter=0;  bh.biYPelsPerMeter=0;
+	bh.biClrUsed=0;  bh.biClrImportant=0;
+
+	if(!littleendian())
+	{
+		bh.bfType=byteswap16(bh.bfType);
+		bh.bfSize=byteswap(bh.bfSize);
+		bh.bfOffBits=byteswap(bh.bfOffBits);
+		bh.biSize=byteswap(bh.biSize);
+		bh.biWidth=byteswap(bh.biWidth);
+		bh.biHeight=byteswap(bh.biHeight);
+		bh.biPlanes=byteswap16(bh.biPlanes);
+		bh.biBitCount=byteswap16(bh.biBitCount);
+		bh.biCompression=byteswap(bh.biCompression);
+		bh.biSizeImage=byteswap(bh.biSizeImage);
+		bh.biXPelsPerMeter=byteswap(bh.biXPelsPerMeter);
+		bh.biYPelsPerMeter=byteswap(bh.biYPelsPerMeter);
+		bh.biClrUsed=byteswap(bh.biClrUsed);
+		bh.biClrImportant=byteswap(bh.biClrImportant);
+	}
+
+	writeme(fd, &bh.bfType, sizeof(unsigned short));
+	writeme(fd, &bh.bfSize, sizeof(unsigned int));
+	writeme(fd, &bh.bfReserved1, sizeof(unsigned short));
+	writeme(fd, &bh.bfReserved2, sizeof(unsigned short));
+	writeme(fd, &bh.bfOffBits, sizeof(unsigned int));
+	writeme(fd, &bh.biSize, sizeof(unsigned int));
+	writeme(fd, &bh.biWidth, sizeof(int));
+	writeme(fd, &bh.biHeight, sizeof(int));
+	writeme(fd, &bh.biPlanes, sizeof(unsigned short));
+	writeme(fd, &bh.biBitCount, sizeof(unsigned short));
+	writeme(fd, &bh.biCompression, sizeof(unsigned int));
+	writeme(fd, &bh.biSizeImage, sizeof(unsigned int));
+	writeme(fd, &bh.biXPelsPerMeter, sizeof(int));
+	writeme(fd, &bh.biYPelsPerMeter, sizeof(int));
+	writeme(fd, &bh.biClrUsed, sizeof(unsigned int));
+	writeme(fd, &bh.biClrImportant, sizeof(unsigned int));
+
+	if((tempbuf=(unsigned char *)malloc(dstpitch*h))==NULL)
+		_throw("Memory allocation error");
+
+	pixelconvert(buf, f, srcpitch, tempbuf, BMP_BGR, dstpitch, w, h, 
+		!srcbottomup);
+
+	if((byteswritten=write(fd, tempbuf, dstpitch*h))!=dstpitch*h)
+		_throw(strerror(errno));
+
+	finally:
+	if(tempbuf) free(tempbuf);
+	if(fd!=-1) close(fd);
+	return retcode;
+}
+
+const char *bmpgeterr(void)
+{
+	return __bmperr;
+}

bmp.h

@@ -0,0 +1,48 @@
+/* Copyright (C)2004 Landmark Graphics Corporation
+ * Copyright (C)2005 Sun Microsystems, Inc.
+ *
+ * This library is free software and may be redistributed and/or modified under
+ * the terms of the wxWindows Library License, Version 3.1 or (at your option)
+ * any later version.  The full license is in the LICENSE.txt file included
+ * with this distribution.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * wxWindows Library License for more details.
+*/
+
+// This provides rudimentary facilities for loading and saving true color
+// BMP and PPM files
+
+#ifndef __BMP_H__
+#define __BMP_H__
+
+#define BMPPIXELFORMATS 6
+enum BMPPIXELFORMAT {BMP_RGB=0, BMP_RGBA, BMP_BGR, BMP_BGRA, BMP_ABGR, BMP_ARGB};
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// This will load a Windows bitmap from a file and return a buffer with the
+// specified pixel format, scanline alignment, and orientation.  The width and
+// height are returned in w and h.
+
+int loadbmp(char *filename, unsigned char **buf, int *w, int *h,
+	enum BMPPIXELFORMAT f, int align, int dstbottomup);
+
+// This will save a buffer with the specified pixel format, pitch, orientation,
+// width, and height as a 24-bit Windows bitmap or PPM (the filename determines
+// which format to use)
+
+int savebmp(char *filename, unsigned char *buf, int w, int h,
+	enum BMPPIXELFORMAT f, int srcpitch, int srcbottomup);
+
+const char *bmpgeterr(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif

cderror.h

@@ -1,7 +1,7 @@
 /*
  * cderror.h
  *
- * Copyright (C) 1994, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -72,7 +72,7 @@ JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
 #ifdef PPM_SUPPORTED
 JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
 JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
-JMESSAGE(JERR_PPM_NOT, "Not a PPM file")
+JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
 JMESSAGE(JTRC_PGM, "%ux%u PGM image")
 JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
 JMESSAGE(JTRC_PPM, "%ux%u PPM image")

cdjpeg.c

@@ -1,7 +1,7 @@
 /*
  * cdjpeg.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -47,7 +47,9 @@ GLOBAL(void)
 enable_signal_catcher (j_common_ptr cinfo)
 {
   sig_cinfo = cinfo;
+#ifdef SIGINT			/* not all systems have SIGINT */
   signal(SIGINT, signal_catcher);
+#endif
 #ifdef SIGTERM			/* not all systems have SIGTERM */
   signal(SIGTERM, signal_catcher);
 #endif

cdjpeg.h

@@ -1,7 +1,7 @@
 /*
  * cdjpeg.h
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -156,9 +156,14 @@ EXTERN(FILE *) write_stdout JPP((void));
 #define READ_BINARY	"r"
 #define WRITE_BINARY	"w"
 #else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define WRITE_BINARY	"wb", "ctx=stm"
+#else				/* standard ANSI-compliant case */
 #define READ_BINARY	"rb"
 #define WRITE_BINARY	"wb"
 #endif
+#endif
 
 #ifndef EXIT_FAILURE		/* define exit() codes if not provided */
 #define EXIT_FAILURE  1

change.log

@@ -1,6 +1,71 @@
 CHANGE LOG for Independent JPEG Group's JPEG software
 
 
+Version 6b  27-Mar-1998
+-----------------------
+
+jpegtran has new features for lossless image transformations (rotation
+and flipping) as well as "lossless" reduction to grayscale.
+
+jpegtran now copies comments by default; it has a -copy switch to enable
+copying all APPn blocks as well, or to suppress comments.  (Formerly it
+always suppressed comments and APPn blocks.)  jpegtran now also preserves
+JFIF version and resolution information.
+
+New decompressor library feature: COM and APPn markers found in the input
+file can be saved in memory for later use by the application.  (Before,
+you had to code this up yourself with a custom marker processor.)
+
+There is an unused field "void * client_data" now in compress and decompress
+parameter structs; this may be useful in some applications.
+
+JFIF version number information is now saved by the decoder and accepted by
+the encoder.  jpegtran uses this to copy the source file's version number,
+to ensure "jpegtran -copy all" won't create bogus files that contain JFXX
+extensions but claim to be version 1.01.  Applications that generate their
+own JFXX extension markers also (finally) have a supported way to cause the
+encoder to emit JFIF version number 1.02.
+
+djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather
+than as unknown APP0 markers.
+
+In -verbose mode, djpeg and rdjpgcom will try to print the contents of
+APP12 markers as text.  Some digital cameras store useful text information
+in APP12 markers.
+
+Handling of truncated data streams is more robust: blocks beyond the one in
+which the error occurs will be output as uniform gray, or left unchanged
+if decoding a progressive JPEG.  The appearance no longer depends on the
+Huffman tables being used.
+
+Huffman tables are checked for validity much more carefully than before.
+
+To avoid the Unisys LZW patent, djpeg's GIF output capability has been
+changed to produce "uncompressed GIFs", and cjpeg's GIF input capability
+has been removed altogether.  We're not happy about it either, but there
+seems to be no good alternative.
+
+The configure script now supports building libjpeg as a shared library
+on many flavors of Unix (all the ones that GNU libtool knows how to
+build shared libraries for).  Use "./configure --enable-shared" to
+try this out.
+
+New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio.
+Also, a jconfig file and a build script for Metrowerks CodeWarrior
+on Apple Macintosh.  makefile.dj has been updated for DJGPP v2, and there
+are miscellaneous other minor improvements in the makefiles.
+
+jmemmac.c now knows how to create temporary files following Mac System 7
+conventions.
+
+djpeg's -map switch is now able to read raw-format PPM files reliably.
+
+cjpeg -progressive -restart no longer generates any unnecessary DRI markers.
+
+Multiple calls to jpeg_simple_progression for a single JPEG object
+no longer leak memory.
+
+
 Version 6a  7-Feb-96
 --------------------
 

cjpeg.1

@@ -1,4 +1,4 @@
-.TH CJPEG 1 "15 June 1995"
+.TH CJPEG 1 "20 March 1998"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -16,7 +16,7 @@ cjpeg \- compress an image file to a JPEG file
 compresses the named image file, or the standard input if no file is
 named, and produces a JPEG/JFIF file on the standard output.
 The currently supported input file formats are: PPM (PBMPLUS color
-format), PGM (PBMPLUS gray-scale format), BMP, GIF, Targa, and RLE (Utah Raster
+format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
 Toolkit format).  (RLE is supported only if the URT library is available.)
 .SH OPTIONS
 All switch names may be abbreviated; for example,
@@ -27,9 +27,9 @@ or
 .BR \-gr .
 Most of the "basic" switches can be abbreviated to as little as one letter.
 Upper and lower case are equivalent (thus
-.B \-GIF
+.B \-BMP
 is the same as
-.BR \-gif ).
+.BR \-bmp ).
 British spellings are also accepted (e.g.,
 .BR \-greyscale ),
 though for brevity these are not mentioned below.
@@ -42,9 +42,9 @@ Scale quantization tables to adjust image quality.  Quality is 0 (worst) to
 .TP
 .B \-grayscale
 Create monochrome JPEG file from color input.  Be sure to use this switch when
-compressing a grayscale GIF file, because
+compressing a grayscale BMP file, because
 .B cjpeg
-isn't bright enough to notice whether a GIF file uses only shades of gray.
+isn't bright enough to notice whether a BMP file uses only shades of gray.
 By saying
 .BR \-grayscale ,
 you'll get a smaller JPEG file that takes less time to process.
@@ -180,16 +180,22 @@ for images that will be transmitted across unreliable networks such as Usenet.
 The
 .B \-smooth
 option filters the input to eliminate fine-scale noise.  This is often useful
-when converting GIF files to JPEG: a moderate smoothing factor of 10 to 50
-gets rid of dithering patterns in the input file, resulting in a smaller JPEG
-file and a better-looking image.  Too large a smoothing factor will visibly
-blur the image, however.
+when converting dithered images to JPEG: a moderate smoothing factor of 10 to
+50 gets rid of dithering patterns in the input file, resulting in a smaller
+JPEG file and a better-looking image.  Too large a smoothing factor will
+visibly blur the image, however.
 .PP
 Switches for wizards:
 .TP
 .B \-baseline
-Force a baseline JPEG file to be generated.  This clamps quantization values
-to 8 bits even at low quality settings.
+Force baseline-compatible quantization tables to be generated.  This clamps
+quantization values to 8 bits even at low quality settings.  (This switch is
+poorly named, since it does not ensure that the output is actually baseline
+JPEG.  For example, you can use
+.B \-baseline
+and
+.B \-progressive
+together.)
 .TP
 .BI \-qtables " file"
 Use the quantization tables given in the specified text file.
@@ -272,6 +278,10 @@ Independent JPEG Group
 .SH BUGS
 Arithmetic coding is not supported for legal reasons.
 .PP
+GIF input files are no longer supported, to avoid the Unisys LZW patent.
+Use a Unisys-licensed program if you need to read a GIF file.  (Conversion
+of GIF files to JPEG is usually a bad idea anyway.)
+.PP
 Not all variants of BMP and Targa file formats are supported.
 .PP
 The

cjpeg.c

@@ -1,7 +1,7 @@
 /*
  * cjpeg.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -184,7 +184,7 @@ usage (void)
 #ifdef C_ARITH_CODING_SUPPORTED
   fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
 #endif
-  fprintf(stderr, "  -baseline      Force baseline output\n");
+  fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
   fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
   fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
   fprintf(stderr, "  -sample HxV[,...]  Set component sampling factors\n");
@@ -255,7 +255,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 #endif
 
     } else if (keymatch(arg, "baseline", 1)) {
-      /* Force baseline output (8-bit quantizer values). */
+      /* Force baseline-compatible output (8-bit quantizer values). */
       force_baseline = TRUE;
 
     } else if (keymatch(arg, "dct", 2)) {

ckconfig.c

@@ -1,402 +0,0 @@
-/*
- * ckconfig.c
- *
- * Copyright (C) 1991-1994, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- */
-
-/*
- * This program is intended to help you determine how to configure the JPEG
- * software for installation on a particular system.  The idea is to try to
- * compile and execute this program.  If your compiler fails to compile the
- * program, make changes as indicated in the comments below.  Once you can
- * compile the program, run it, and it will produce a "jconfig.h" file for
- * your system.
- *
- * As a general rule, each time you try to compile this program,
- * pay attention only to the *first* error message you get from the compiler.
- * Many C compilers will issue lots of spurious error messages once they
- * have gotten confused.  Go to the line indicated in the first error message,
- * and read the comments preceding that line to see what to change.
- *
- * Almost all of the edits you may need to make to this program consist of
- * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL",
- * or vice versa.  This is called defining or undefining that symbol.
- */
-
-
-/* First we must see if your system has the include files we need.
- * We start out with the assumption that your system has all the ANSI-standard
- * include files.  If you get any error trying to include one of these files,
- * undefine the corresponding HAVE_xxx symbol.
- */
-
-#define HAVE_STDDEF_H		/* replace 'define' by 'undef' if error here */
-#ifdef HAVE_STDDEF_H		/* next line will be skipped if you undef... */
-#include <stddef.h>
-#endif
-
-#define HAVE_STDLIB_H		/* same thing for stdlib.h */
-#ifdef HAVE_STDLIB_H
-#include <stdlib.h>
-#endif
-
-#include <stdio.h>		/* If you ain't got this, you ain't got C. */
-
-/* We have to see if your string functions are defined by
- * strings.h (old BSD convention) or string.h (everybody else).
- * We try the non-BSD convention first; define NEED_BSD_STRINGS
- * if the compiler says it can't find string.h.
- */
-
-#undef NEED_BSD_STRINGS
-
-#ifdef NEED_BSD_STRINGS
-#include <strings.h>
-#else
-#include <string.h>
-#endif
-
-/* On some systems (especially older Unix machines), type size_t is
- * defined only in the include file <sys/types.h>.  If you get a failure
- * on the size_t test below, try defining NEED_SYS_TYPES_H.
- */
-
-#undef NEED_SYS_TYPES_H		/* start by assuming we don't need it */
-#ifdef NEED_SYS_TYPES_H
-#include <sys/types.h>
-#endif
-
-
-/* Usually type size_t is defined in one of the include files we've included
- * above.  If not, you'll get an error on the "typedef size_t my_size_t;" line.
- * In that case, first try defining NEED_SYS_TYPES_H just above.
- * If that doesn't work, you'll have to search through your system library
- * to figure out which include file defines "size_t".  Look for a line that
- * says "typedef something-or-other size_t;".  Then, change the line below
- * that says "#include <someincludefile.h>" to instead include the file
- * you found size_t in, and define NEED_SPECIAL_INCLUDE.  If you can't find
- * type size_t anywhere, try replacing "#include <someincludefile.h>" with
- * "typedef unsigned int size_t;".
- */
-
-#undef NEED_SPECIAL_INCLUDE	/* assume we DON'T need it, for starters */
-
-#ifdef NEED_SPECIAL_INCLUDE
-#include <someincludefile.h>
-#endif
-
-typedef size_t my_size_t;	/* The payoff: do we have size_t now? */
-
-
-/* The next question is whether your compiler supports ANSI-style function
- * prototypes.  You need to know this in order to choose between using
- * makefile.ansi and using makefile.unix.
- * The #define line below is set to assume you have ANSI function prototypes.
- * If you get an error in this group of lines, undefine HAVE_PROTOTYPES.
- */
-
-#define HAVE_PROTOTYPES
-
-#ifdef HAVE_PROTOTYPES
-int testfunction (int arg1, int * arg2); /* check prototypes */
-
-struct methods_struct {		/* check method-pointer declarations */
-  int (*error_exit) (char *msgtext);
-  int (*trace_message) (char *msgtext);
-  int (*another_method) (void);
-};
-
-int testfunction (int arg1, int * arg2) /* check definitions */
-{
-  return arg2[arg1];
-}
-
-int test2function (void)	/* check void arg list */
-{
-  return 0;
-}
-#endif
-
-
-/* Now we want to find out if your compiler knows what "unsigned char" means.
- * If you get an error on the "unsigned char un_char;" line,
- * then undefine HAVE_UNSIGNED_CHAR.
- */
-
-#define HAVE_UNSIGNED_CHAR
-
-#ifdef HAVE_UNSIGNED_CHAR
-unsigned char un_char;
-#endif
-
-
-/* Now we want to find out if your compiler knows what "unsigned short" means.
- * If you get an error on the "unsigned short un_short;" line,
- * then undefine HAVE_UNSIGNED_SHORT.
- */
-
-#define HAVE_UNSIGNED_SHORT
-
-#ifdef HAVE_UNSIGNED_SHORT
-unsigned short un_short;
-#endif
-
-
-/* Now we want to find out if your compiler understands type "void".
- * If you get an error anywhere in here, undefine HAVE_VOID.
- */
-
-#define HAVE_VOID
-
-#ifdef HAVE_VOID
-/* Caution: a C++ compiler will insist on complete prototypes */
-typedef void * void_ptr;	/* check void * */
-#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
-typedef void (*void_func) (int a, int b);
-#else
-typedef void (*void_func) ();
-#endif
-
-#ifdef HAVE_PROTOTYPES		/* check void function result */
-void test3function (void_ptr arg1, void_func arg2)
-#else
-void test3function (arg1, arg2)
-     void_ptr arg1;
-     void_func arg2;
-#endif
-{
-  char * locptr = (char *) arg1; /* check casting to and from void * */
-  arg1 = (void *) locptr;
-  (*arg2) (1, 2);		/* check call of fcn returning void */
-}
-#endif
-
-
-/* Now we want to find out if your compiler knows what "const" means.
- * If you get an error here, undefine HAVE_CONST.
- */
-
-#define HAVE_CONST
-
-#ifdef HAVE_CONST
-static const int carray[3] = {1, 2, 3};
-
-#ifdef HAVE_PROTOTYPES
-int test4function (const int arg1)
-#else
-int test4function (arg1)
-     const int arg1;
-#endif
-{
-  return carray[arg1];
-}
-#endif
-
-
-/* If you get an error or warning about this structure definition,
- * define INCOMPLETE_TYPES_BROKEN.
- */
-
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifndef INCOMPLETE_TYPES_BROKEN
-typedef struct undefined_structure * undef_struct_ptr;
-#endif
-
-
-/* If you get an error about duplicate names,
- * define NEED_SHORT_EXTERNAL_NAMES.
- */
-
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-#ifndef NEED_SHORT_EXTERNAL_NAMES
-
-int possibly_duplicate_function ()
-{
-  return 0;
-}
-
-int possibly_dupli_function ()
-{
-  return 1;
-}
-
-#endif
-
-
-
-/************************************************************************
- *  OK, that's it.  You should not have to change anything beyond this
- *  point in order to compile and execute this program.  (You might get
- *  some warnings, but you can ignore them.)
- *  When you run the program, it will make a couple more tests that it
- *  can do automatically, and then it will create jconfig.h and print out
- *  any additional suggestions it has.
- ************************************************************************
- */
-
-
-#ifdef HAVE_PROTOTYPES
-int is_char_signed (int arg)
-#else
-int is_char_signed (arg)
-     int arg;
-#endif
-{
-  if (arg == 189) {		/* expected result for unsigned char */
-    return 0;			/* type char is unsigned */
-  }
-  else if (arg != -67) {	/* expected result for signed char */
-    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
-    printf("I fear the JPEG software will not work at all.\n\n");
-  }
-  return 1;			/* assume char is signed otherwise */
-}
-
-
-#ifdef HAVE_PROTOTYPES
-int is_shifting_signed (long arg)
-#else
-int is_shifting_signed (arg)
-     long arg;
-#endif
-/* See whether right-shift on a long is signed or not. */
-{
-  long res = arg >> 4;
-
-  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
-    return 1;			/* right shift is signed */
-  }
-  /* see if unsigned-shift hack will fix it. */
-  /* we can't just test exact value since it depends on width of long... */
-  res |= (~0L) << (32-4);
-  if (res == -0x7F7E80CL) {	/* expected result now? */
-    return 0;			/* right shift is unsigned */
-  }
-  printf("Right shift isn't acting as I expect it to.\n");
-  printf("I fear the JPEG software will not work at all.\n\n");
-  return 0;			/* try it with unsigned anyway */
-}
-
-
-#ifdef HAVE_PROTOTYPES
-int main (int argc, char ** argv)
-#else
-int main (argc, argv)
-     int argc;
-     char ** argv;
-#endif
-{
-  char signed_char_check = (char) (-67);
-  FILE *outfile;
-
-  /* Attempt to write jconfig.h */
-  if ((outfile = fopen("jconfig.h", "w")) == NULL) {
-    printf("Failed to write jconfig.h\n");
-    return 1;
-  }
-
-  /* Write out all the info */
-  fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n");
-  fprintf(outfile, "/* see jconfig.doc for explanations */\n\n");
-#ifdef HAVE_PROTOTYPES
-  fprintf(outfile, "#define HAVE_PROTOTYPES\n");
-#else
-  fprintf(outfile, "#undef HAVE_PROTOTYPES\n");
-#endif
-#ifdef HAVE_UNSIGNED_CHAR
-  fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n");
-#else
-  fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n");
-#endif
-#ifdef HAVE_UNSIGNED_SHORT
-  fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n");
-#else
-  fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n");
-#endif
-#ifdef HAVE_VOID
-  fprintf(outfile, "/* #define void char */\n");
-#else
-  fprintf(outfile, "#define void char\n");
-#endif
-#ifdef HAVE_CONST
-  fprintf(outfile, "/* #define const */\n");
-#else
-  fprintf(outfile, "#define const\n");
-#endif
-  if (is_char_signed((int) signed_char_check))
-    fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n");
-  else
-    fprintf(outfile, "#define CHAR_IS_UNSIGNED\n");
-#ifdef HAVE_STDDEF_H
-  fprintf(outfile, "#define HAVE_STDDEF_H\n");
-#else
-  fprintf(outfile, "#undef HAVE_STDDEF_H\n");
-#endif
-#ifdef HAVE_STDLIB_H
-  fprintf(outfile, "#define HAVE_STDLIB_H\n");
-#else
-  fprintf(outfile, "#undef HAVE_STDLIB_H\n");
-#endif
-#ifdef NEED_BSD_STRINGS
-  fprintf(outfile, "#define NEED_BSD_STRINGS\n");
-#else
-  fprintf(outfile, "#undef NEED_BSD_STRINGS\n");
-#endif
-#ifdef NEED_SYS_TYPES_H
-  fprintf(outfile, "#define NEED_SYS_TYPES_H\n");
-#else
-  fprintf(outfile, "#undef NEED_SYS_TYPES_H\n");
-#endif
-  fprintf(outfile, "#undef NEED_FAR_POINTERS\n");
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-  fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n");
-#else
-  fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n");
-#endif
-#ifdef INCOMPLETE_TYPES_BROKEN
-  fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n");
-#else
-  fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n");
-#endif
-  fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n");
-  if (is_shifting_signed(-0x7F7E80B1L))
-    fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n");
-  else
-    fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n");
-  fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n");
-  fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n");
-  fprintf(outfile, "#define BMP_SUPPORTED		/* BMP image file format */\n");
-  fprintf(outfile, "#define GIF_SUPPORTED		/* GIF image file format */\n");
-  fprintf(outfile, "#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */\n");
-  fprintf(outfile, "#undef RLE_SUPPORTED		/* Utah RLE image file format */\n");
-  fprintf(outfile, "#define TARGA_SUPPORTED		/* Targa image file format */\n\n");
-  fprintf(outfile, "#undef TWO_FILE_COMMANDLINE	/* You may need this on non-Unix systems */\n");
-  fprintf(outfile, "#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */\n");
-  fprintf(outfile, "#undef DONT_USE_B_MODE\n");
-  fprintf(outfile, "/* #define PROGRESS_REPORT */	/* optional */\n");
-  fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n");
-
-  /* Close the jconfig.h file */
-  fclose(outfile);
-
-  /* User report */
-  printf("Configuration check for Independent JPEG Group's software done.\n");
-  printf("\nI have written the jconfig.h file for you.\n\n");
-#ifdef HAVE_PROTOTYPES
-  printf("You should use makefile.ansi as the starting point for your Makefile.\n");
-#else
-  printf("You should use makefile.unix as the starting point for your Makefile.\n");
-#endif
-
-#ifdef NEED_SPECIAL_INCLUDE
-  printf("\nYou'll need to change jconfig.h to include the system include file\n");
-  printf("that you found type size_t in, or add a direct definition of type\n");
-  printf("size_t if that's what you used.  Just add it to the end.\n");
-#endif
-
-  return 0;
-}

configure.ac

@@ -0,0 +1,184 @@
+#                                               -*- Autoconf -*-
+# Process this file with autoconf to produce a configure script.
+
+AC_PREREQ([2.56])
+AC_INIT([libjpeg-turbo], [0.0.90])
+BUILD=`date +%Y%m%d`
+
+AM_INIT_AUTOMAKE([-Wall foreign dist-bzip2])
+AC_PREFIX_DEFAULT(/opt/libjpeg-turbo)
+
+# Always build with prototypes
+AC_DEFINE([HAVE_PROTOTYPES], 1, [Define if your compiler supports prototypes])
+# Don't use undefined types
+AC_DEFINE([INCOMPLETE_TYPES_BROKEN], 1, [Define if you want use complete types])
+
+# Checks for programs.
+SAVED_CFLAGS=${CFLAGS}
+SAVED_CXXFLAGS=${CXXFLAGS}
+AC_PROG_CPP
+AC_PROG_CC
+AC_PROG_CXX
+AC_PROG_INSTALL
+AC_PROG_LIBTOOL
+AC_PROG_LN_S
+
+AC_MSG_CHECKING([whether the linker supports version scripts])
+VERSION_SCRIPT=no
+LDVER=`$LD --help </dev/null 2>&1 | grep "\-\-version-script"`
+if test "$LDVER"; then
+  VERSION_SCRIPT=yes
+  VERSION_SCRIPT_FLAG=-Wl,--version-script,
+  AC_MSG_RESULT(yes)
+else
+  LDVER=`$LD --help </dev/null 2>&1 | grep "\-M"`
+  if test "$LDVER"; then
+    VERSION_SCRIPT=yes
+    VERSION_SCRIPT_FLAG=-Wl,-M,
+    AC_MSG_RESULT(yes)
+  else
+    AC_MSG_RESULT(no)
+  fi
+fi
+
+AM_CONDITIONAL(VERSION_SCRIPT, test "x$VERSION_SCRIPT" = "xyes")
+AC_SUBST(VERSION_SCRIPT_FLAG)
+
+if test "x${GCC}" = "xyes"; then
+  if test "x${SAVED_CFLAGS}" = "x"; then
+    CFLAGS=-O3
+  fi
+  if test "x${SAVED_CXXFLAGS}" = "x"; then
+    CXXFLAGS=-O3
+  fi
+fi
+
+AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
+if test "x${SUNCC}" = "xyes"; then
+  if test "x${SAVED_CFLAGS}" = "x"; then
+    CFLAGS=-xO5
+  fi
+  if test "x${SAVED_CXXFLAGS}" = "x"; then
+    CXXFLAGS=-xO5
+  fi
+fi
+
+# Checks for libraries.
+
+# Checks for header files.
+AC_HEADER_STDC
+AC_CHECK_HEADERS([stddef.h stdlib.h string.h])
+AC_CHECK_HEADER([sys/types.h], AC_DEFINE([NEED_SYS_TYPES_H], 1, [Define if you have sys/types.h]))
+
+# Checks for typedefs, structures, and compiler characteristics.
+AC_C_CONST
+AC_C_CHAR_UNSIGNED
+AC_C_INLINE
+AC_TYPE_SIZE_T
+AC_CHECK_TYPES([unsigned char, unsigned short])
+
+AC_MSG_CHECKING([if right shift is signed])
+AC_TRY_RUN(
+	[#include <stdio.h>
+	 int is_shifting_signed (long arg) {
+	 long res = arg >> 4;
+
+	 if (res == -0x7F7E80CL)
+		return 1; /* right shift is signed */
+
+	 /* see if unsigned-shift hack will fix it. */
+	 /* we can't just test exact value since it depends on width of long... */
+	 res |= (~0L) << (32-4);
+	 if (res == -0x7F7E80CL)
+		return 0; /* right shift is unsigned */
+
+	 printf("Right shift isn't acting as I expect it to.\n");
+	 printf("I fear the JPEG software will not work at all.\n\n");
+	 return 0; /* try it with unsigned anyway */
+	 }
+	 int main (void) {
+		exit(is_shifting_signed(-0x7F7E80B1L));
+	 }],
+	[AC_MSG_RESULT(no)
+	 AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], 1, [Define if shift is unsigned])],
+	[AC_MSG_RESULT(yes)],
+	[AC_MSG_RESULT(Assuming that right shift is signed on target machine.)])
+
+# test whether global names are unique to at least 15 chars
+AC_MSG_CHECKING([for short external names])
+AC_TRY_LINK(
+	[int possibly_duplicate_function () { return 0; }
+	 int possibly_dupli_function () { return 1; }], [ ],
+	[AC_MSG_RESULT(ok)],
+	[AC_MSG_RESULT(short)
+	 AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], 1, [Define if you need short function names])])
+
+# Checks for library functions.
+AC_CHECK_FUNCS([memset memcpy], [],
+	[AC_DEFINE([NEED_BSD_STRINGS], 1,
+		   [Define if you have BSD-like bzero and bcopy])])
+
+# Set flags to indicate platform
+case "$host_os" in
+  cygwin* | mingw* | pw32* | interix*)
+    is_win32=1
+  ;;
+esac
+AM_CONDITIONAL([IS_WIN32], [test "x$is_win32" = "x1"])
+
+# SIMD is optional
+AC_ARG_WITH([simd],
+    AC_HELP_STRING([--without-simd],[Omit accelerated SIMD routines.]))
+if test "x${with_simd}" != "xno"; then
+  # Check if we're on a supported CPU
+  AC_MSG_CHECKING([if we have SIMD optimisations for cpu type])
+  case "$host_cpu" in
+    x86_64)
+      AC_MSG_RESULT([yes (x86_64)])
+      AC_PROG_NASM
+      simd_arch=x86_64
+    ;;
+    i*86 | x86 | ia32)
+      AC_MSG_RESULT([yes (i386)])
+      AC_PROG_NASM
+      simd_arch=i386
+    ;;
+    *)
+      AC_MSG_RESULT([no ("$host_cpu")])
+      AC_MSG_ERROR([CPU is not supported])
+    ;;
+  esac
+
+  if test "x${with_simd}" != "xno"; then
+    AC_DEFINE([WITH_SIMD], [1], [Use accelerated SIMD routines.])
+  fi
+fi
+
+AM_CONDITIONAL([WITH_SIMD], [test "x$with_simd" != "xno"])
+AM_CONDITIONAL([SIMD_I386], [test "x$simd_arch" = "xi386"])
+AM_CONDITIONAL([SIMD_X86_64], [test "x$simd_arch" = "xx86_64"])
+AM_CONDITIONAL([X86_64], [test "x$host_cpu" = "xx86_64"])
+
+case "$host_cpu" in
+  x86_64)
+    RPMARCH=x86_64
+    DEBARCH=amd64
+    ;;
+  i*86 | x86 | ia32)
+    RPMARCH=i386
+    DEBARCH=i386
+    ;;
+esac
+
+AC_SUBST(RPMARCH)
+AC_SUBST(DEBARCH)
+AC_SUBST(BUILD)
+
+# jconfig.h is the file we use, but we have another before that to
+# fool autoheader. the reason is that we include this header in our
+# API headers, which can screw things up for users of the lib.
+# jconfig.h is a minimal version that allows this package to be built
+AC_CONFIG_HEADERS([config.h])
+AC_CONFIG_HEADERS([jconfig.h])
+AC_CONFIG_FILES([Makefile simd/Makefile])
+AC_OUTPUT

djpeg.1

@@ -1,4 +1,4 @@
-.TH DJPEG 1 "15 June 1995"
+.TH DJPEG 1 "22 August 1997"
 .SH NAME
 djpeg \- decompress a JPEG file to an image file
 .SH SYNOPSIS
@@ -26,9 +26,9 @@ or
 .BR \-gr .
 Most of the "basic" switches can be abbreviated to as little as one letter.
 Upper and lower case are equivalent (thus
-.B \-GIF
+.B \-BMP
 is the same as
-.BR \-gif ).
+.BR \-bmp ).
 British spellings are also accepted (e.g.,
 .BR \-greyscale ),
 though for brevity these are not mentioned below.
@@ -182,13 +182,13 @@ Same as
 .BR \-verbose .
 .SH EXAMPLES
 .LP
-This example decompresses the JPEG file foo.jpg, automatically quantizes to
-256 colors, and saves the output in GIF format in foo.gif:
+This example decompresses the JPEG file foo.jpg, quantizes it to
+256 colors, and saves the output in 8-bit BMP format in foo.bmp:
 .IP
-.B djpeg \-gif
+.B djpeg \-colors 256 \-bmp
 .I foo.jpg
 .B >
-.I foo.gif
+.I foo.bmp
 .SH HINTS
 To get a quick preview of an image, use the
 .B \-grayscale
@@ -245,4 +245,9 @@ Independent JPEG Group
 .SH BUGS
 Arithmetic coding is not supported for legal reasons.
 .PP
+To avoid the Unisys LZW patent,
+.B djpeg
+produces uncompressed GIF files.  These are larger than they should be, but
+are readable by standard GIF decoders.
+.PP
 Still not as fast as we'd like.

djpeg.c

@@ -1,7 +1,7 @@
 /*
  * djpeg.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -344,9 +344,9 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
 
 
 /*
- * Marker processor for COM markers.
+ * Marker processor for COM and interesting APPn markers.
  * This replaces the library's built-in processor, which just skips the marker.
- * We want to print out the marker as text, if possible.
+ * We want to print out the marker as text, to the extent possible.
  * Note this code relies on a non-suspending data source.
  */
 
@@ -366,7 +366,7 @@ jpeg_getc (j_decompress_ptr cinfo)
 
 
 METHODDEF(boolean)
-COM_handler (j_decompress_ptr cinfo)
+print_text_marker (j_decompress_ptr cinfo)
 {
   boolean traceit = (cinfo->err->trace_level >= 1);
   INT32 length;
@@ -377,8 +377,13 @@ COM_handler (j_decompress_ptr cinfo)
   length += jpeg_getc(cinfo);
   length -= 2;			/* discount the length word itself */
 
-  if (traceit)
-    fprintf(stderr, "Comment, length %ld:\n", (long) length);
+  if (traceit) {
+    if (cinfo->unread_marker == JPEG_COM)
+      fprintf(stderr, "Comment, length %ld:\n", (long) length);
+    else			/* assume it is an APPn otherwise */
+      fprintf(stderr, "APP%d, length %ld:\n",
+	      cinfo->unread_marker - JPEG_APP0, (long) length);
+  }
 
   while (--length >= 0) {
     ch = jpeg_getc(cinfo);
@@ -445,8 +450,15 @@ main (int argc, char **argv)
   jerr.addon_message_table = cdjpeg_message_table;
   jerr.first_addon_message = JMSG_FIRSTADDONCODE;
   jerr.last_addon_message = JMSG_LASTADDONCODE;
-  /* Insert custom COM marker processor. */
-  jpeg_set_marker_processor(&cinfo, JPEG_COM, COM_handler);
+
+  /* Insert custom marker processor for COM and APP12.
+   * APP12 is used by some digital camera makers for textual info,
+   * so we provide the ability to display it as text.
+   * If you like, additional APPn marker types can be selected for display,
+   * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
+   */
+  jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
+  jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);
 
   /* Now safe to enable signal catcher. */
 #ifdef NEED_SIGNAL_CATCHER

filelist.doc

@@ -1,6 +1,6 @@
 IJG JPEG LIBRARY:  FILE LIST
 
-Copyright (C) 1994-1996, Thomas G. Lane.
+Copyright (C) 1994-1998, Thomas G. Lane.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -113,8 +113,8 @@ module:
 jmemnobs.c	"No backing store": assumes adequate virtual memory exists.
 jmemansi.c	Makes temporary files with ANSI-standard routine tmpfile().
 jmemname.c	Makes temporary files with program-generated file names.
-jmemdos.c	Custom implementation for MS-DOS: knows about extended and
-		expanded memory as well as temporary files.
+jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
+		can use extended and expanded memory as well as temp files.
 jmemmac.c	Custom implementation for Apple Macintosh.
 
 Exactly one of the system-dependent modules should be configured into an
@@ -134,8 +134,9 @@ CJPEG/DJPEG/JPEGTRAN
 
 Include files:
 
-cdjpeg.h	Declarations shared by cjpeg/djpeg modules.
-cderror.h	Additional error and trace message codes for cjpeg/djpeg.
+cdjpeg.h	Declarations shared by cjpeg/djpeg/jpegtran modules.
+cderror.h	Additional error and trace message codes for cjpeg et al.
+transupp.h	Declarations for jpegtran support routines in transupp.c.
 
 C source code files:
 
@@ -146,11 +147,12 @@ cdjpeg.c	Utility routines used by all three programs.
 rdcolmap.c	Code to read a colormap file for djpeg's "-map" switch.
 rdswitch.c	Code to process some of cjpeg's more complex switches.
 		Also used by jpegtran.
+transupp.c	Support code for jpegtran: lossless image manipulations.
 
 Image file reader modules for cjpeg:
 
 rdbmp.c		BMP file input.
-rdgif.c		GIF file input.
+rdgif.c		GIF file input (now just a stub).
 rdppm.c		PPM/PGM file input.
 rdrle.c		Utah RLE file input.
 rdtarga.c	Targa file input.
@@ -158,7 +160,7 @@ rdtarga.c	Targa file input.
 Image file writer modules for djpeg:
 
 wrbmp.c		BMP file output.
-wrgif.c		GIF file output.
+wrgif.c		GIF file output (a mere shadow of its former self).
 wrppm.c		PPM/PGM file output.
 wrrle.c		Utah RLE file output.
 wrtarga.c	Targa file output.
@@ -190,6 +192,11 @@ example.c	Sample code for calling JPEG library.
 Configuration/installation files and programs (see install.doc for more info):
 
 configure	Unix shell script to perform automatic configuration.
+ltconfig	Support scripts for configure (from GNU libtool).
+ltmain.sh
+config.guess
+config.sub
+install-sh	Install shell script for those Unix systems lacking one.
 ckconfig.c	Program to generate jconfig.h on non-Unix systems.
 jconfig.doc	Template for making jconfig.h by hand.
 makefile.*	Sample makefiles for particular systems.

install.doc

@@ -1,6 +1,6 @@
 INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
 
-Copyright (C) 1991-1996, Thomas G. Lane.
+Copyright (C) 1991-1998, Thomas G. Lane.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -94,6 +94,19 @@ Configure was created with GNU Autoconf and it follows the usual conventions
 for GNU configure scripts.  It makes a few assumptions that you may want to
 override.  You can do this by providing optional switches to configure:
 
+* If you want to build libjpeg as a shared library, say
+	./configure --enable-shared
+To get both shared and static libraries, say
+	./configure --enable-shared --enable-static
+Note that these switches invoke GNU libtool to take care of system-dependent
+shared library building methods.  If things don't work this way, please try
+running configure without either switch; that should build a static library
+without using libtool.  If that works, your problem is probably with libtool
+not with the IJG code.  libtool is fairly new and doesn't support all flavors
+of Unix yet.  (You might be able to find a newer version of libtool than the
+one included with libjpeg; see ftp.gnu.org.  Report libtool problems to
+bug-libtool@gnu.org.)
+
 * Configure will use gcc (GNU C compiler) if it's available, otherwise cc.
 To force a particular compiler to be selected, use the CC option, for example
 	./configure CC='cc'
@@ -102,8 +115,10 @@ For example, on HP-UX you probably want to say
 	./configure CC='cc -Aa'
 to get HP's compiler to run in ANSI mode.
 
-* The default CFLAGS setting is "-O".  You can override this by saying,
-for example, ./configure CFLAGS='-O2'.
+* The default CFLAGS setting is "-O" for non-gcc compilers, "-O2" for gcc.
+You can override this by saying, for example,
+	./configure CFLAGS='-g'
+if you want to compile with debugging support.
 
 * Configure will set up the makefile so that "make install" will install files
 into /usr/local/bin, /usr/local/man, etc.  You can specify an installation
@@ -131,17 +146,20 @@ Makefile	jconfig file	System and/or compiler
 
 makefile.manx	jconfig.manx	Amiga, Manx Aztec C
 makefile.sas	jconfig.sas	Amiga, SAS C
+makeproj.mac	jconfig.mac	Apple Macintosh, Metrowerks CodeWarrior
 mak*jpeg.st	jconfig.st	Atari ST/STE/TT, Pure C or Turbo C
 makefile.bcc	jconfig.bcc	MS-DOS or OS/2, Borland C
 makefile.dj	jconfig.dj	MS-DOS, DJGPP (Delorie's port of GNU C)
-makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C version 6.x and up
+makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C (16-bit only)
 makefile.wat	jconfig.wat	MS-DOS, OS/2, or Windows NT, Watcom C
+makefile.vc	jconfig.vc	Windows NT/95, MS Visual C++
+make*.ds	jconfig.vc	Windows NT/95, MS Developer Studio
 makefile.mms	jconfig.vms	Digital VMS, with MMS software
 makefile.vms	jconfig.vms	Digital VMS, without MMS software
 
-Copy the proper jconfig file to jconfig.h and the makefile to Makefile
-(or whatever your system uses as the standard makefile name).  For the
-Atari, we provide four project files; see the Atari hints below.
+Copy the proper jconfig file to jconfig.h and the makefile to Makefile (or
+whatever your system uses as the standard makefile name).  For more info see
+the appropriate system-specific hints section near the end of this file.
 
 
 Configuring the software by hand
@@ -303,7 +321,7 @@ As a quick test of functionality we've included a small sample image in
 several forms:
 	testorig.jpg	Starting point for the djpeg tests.
 	testimg.ppm	The output of djpeg testorig.jpg
-	testimg.gif	The output of djpeg -gif testorig.jpg
+	testimg.bmp	The output of djpeg -bmp -colors 256 testorig.jpg
 	testimg.jpg	The output of cjpeg testimg.ppm
 	testprog.jpg	Progressive-mode equivalent of testorig.jpg.
 	testimgp.jpg	The output of cjpeg -progressive -optimize testimg.ppm
@@ -339,10 +357,10 @@ check fails, try recompiling with USE_SETMODE or USE_FDOPEN defined.
 If it still doesn't work, better use two-file style.
 
 If you chose a memory manager other than jmemnobs.c, you should test that
-temporary-file usage works.  Try "djpeg -gif -max 0 testorig.jpg" and make
-sure its output matches testimg.gif.  If you have any really large images
-handy, try compressing them with -optimize and/or decompressing with -gif to
-make sure your DEFAULT_MAX_MEM setting is not too large.
+temporary-file usage works.  Try "djpeg -bmp -colors 256 -max 0 testorig.jpg"
+and make sure its output matches testimg.bmp.  If you have any really large
+images handy, try compressing them with -optimize and/or decompressing with
+-colors 256 to make sure your DEFAULT_MAX_MEM setting is not too large.
 
 NOTE: this is far from an exhaustive test of the JPEG software; some modules,
 such as 1-pass color quantization, are not exercised at all.  It's just a
@@ -357,7 +375,7 @@ Once you're done with the above steps, you can install the software by
 copying the executable files (cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom)
 to wherever you normally install programs.  On Unix systems, you'll also want
 to put the man pages (cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1)
-in the man-page directory.  The canned makefiles don't support this step
+in the man-page directory.  The pre-fab makefiles don't support this step
 since there's such a wide variety of installation procedures on different
 systems.
 
@@ -370,8 +388,13 @@ to see where configure thought the files should go.  You may need to edit
 the Makefile, particularly if your system's conventions for man page
 filenames don't match what configure expects.
 
-If you want to install the library file libjpeg.a and the include files j*.h
-(for use in compiling other programs besides the IJG ones), then say
+If you want to install the IJG library itself, for use in compiling other
+programs besides ours, then you need to put the four include files
+	jpeglib.h jerror.h jconfig.h jmorecfg.h
+into your include-file directory, and put the library file libjpeg.a
+(extension may vary depending on system) wherever library files go.
+If you generated a Makefile with "configure", it will do what it thinks
+is the right thing if you say
 	make install-lib
 
 
@@ -426,8 +449,8 @@ The PPM reader (rdppm.c) can read 12-bit data from either text-format or
 binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
 maxval greater than 255 are assumed to use 2 bytes per sample, LSB first
 (little-endian order).  As of early 1995, 2-byte binary format is not
-officially supported by the PBMPLUS library, but it is expected that the
-next release of PBMPLUS will support it.  Note that the PPM reader will
+officially supported by the PBMPLUS library, but it is expected that a
+future release of PBMPLUS will support it.  Note that the PPM reader will
 read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
 data is automatically rescaled to either maxval=255 or maxval=4095 as
 appropriate for the cjpeg bit depth.
@@ -568,19 +591,19 @@ Atari ST/STE/TT:
 Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st
 to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively.  The
 project files should work as-is with Pure C.  For Turbo C, change library
-filenames "PC..." to "TC..." in each project file.  Note that libjpeg.prj
+filenames "pc..." to "tc..." in each project file.  Note that libjpeg.prj
 selects jmemansi.c as the recommended memory manager.  You'll probably want to
 adjust the DEFAULT_MAX_MEM setting --- you want it to be a couple hundred K
 less than your normal free memory.  Put "#define DEFAULT_MAX_MEM nnnn" into
 jconfig.h to do this.
 
 To use the 68881/68882 coprocessor for the floating point DCT, add the
-compiler option "-8" to the project files and replace PCFLTLIB.LIB with
-PC881LIB.LIB in cjpeg.prj and djpeg.prj.  Or if you don't have a
+compiler option "-8" to the project files and replace pcfltlib.lib with
+pc881lib.lib in cjpeg.prj and djpeg.prj.  Or if you don't have a
 coprocessor, you may prefer to remove the float DCT code by undefining
 DCT_FLOAT_SUPPORTED in jmorecfg.h (since without a coprocessor, the float
 code will be too slow to be useful).  In that case, you can delete
-PCFLTLIB.LIB from the project files.
+pcfltlib.lib from the project files.
 
 Note that you must make libjpeg.lib before making cjpeg.ttp, djpeg.ttp,
 or jpegtran.ttp.  You'll have to perform the self-test by hand.
@@ -637,49 +660,62 @@ provide a Unix-style command line interface.  You can use this interface on
 the Mac by means of the ccommand() library routine provided by Metrowerks
 CodeWarrior or Think C.  This is only appropriate for testing the library,
 however; to make a user-friendly equivalent of cjpeg/djpeg you'd really want
-to develop a Mac-style user interface.  Such an interface exists for pre-v5
-IJG libraries (see the Think C entry, below) but at this writing it has not
-been updated to work with the current release.
+to develop a Mac-style user interface.  There isn't a complete example
+available at the moment, but there are some helpful starting points:
+1. Sam Bushell's free "To JPEG" applet provides drag-and-drop conversion to
+JPEG under System 7 and later.  This only illustrates how to use the
+compression half of the library, but it does a very nice job of that part.
+The CodeWarrior source code is available from http://www.pobox.com/~jsam.
+2. Jim Brunner prepared a Mac-style user interface for both compression and
+decompression.  Unfortunately, it hasn't been updated since IJG v4, and
+the library's API has changed considerably since then.  Still it may be of
+some help, particularly as a guide to compiling the IJG code under Think C.
+Jim's code is available from the Info-Mac archives, at sumex-aim.stanford.edu
+or mirrors thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx.
 
-We recommend replacing "malloc" and "free" by "NewPtr" and "DisposePtr" in
-whichever memory manager back end you use, because Mac C libraries often
-have inferior implementations of malloc/free.  jmemmac.c is recommended;
-it is a customized version of jmemansi.c with this change and a Mac-specific
-implementation of jpeg_mem_available().  You can also use jmemnobs.c if you
-don't care about handling images larger than available memory.
+jmemmac.c is the recommended memory manager back end for Macintosh.  It uses
+NewPtr/DisposePtr instead of malloc/free, and has a Mac-specific
+implementation of jpeg_mem_available().  It also creates temporary files that
+follow Mac conventions.  (That part of the code relies on System-7-or-later OS
+functions.  See the comments in jmemmac.c if you need to run it on System 6.)
+NOTE that USE_MAC_MEMMGR must be defined in jconfig.h to use jmemmac.c.
 
-
-Macintosh, MPW:
-
-We don't directly support MPW in the current release, but Larry Rosenstein
-ported an earlier version of the IJG code without very much trouble.  There's
-useful notes and conversion scripts in his kit for porting PBMPLUS to MPW.
-You can obtain the kit by FTP to ftp.apple.com, files /pub/lsr/pbmplus-port*.
+You can also use jmemnobs.c, if you don't care about handling images larger
+than available memory.  If you use any memory manager back end other than
+jmemmac.c, we recommend replacing "malloc" and "free" by "NewPtr" and
+"DisposePtr", because Mac C libraries often have peculiar implementations of
+malloc/free.  (For instance, free() may not return the freed space to the
+Mac Memory Manager.  This is undesirable for the IJG code because jmemmgr.c
+already clumps space requests.)
 
 
 Macintosh, Metrowerks CodeWarrior:
 
-Metrowerks release DR2 has problems with the IJG code; don't use it.  Release
-DR3.5 or later should be OK.
-
 The Unix-command-line-style interface can be used by defining USE_CCOMMAND.
-You'll also need to define either TWO_FILE_COMMANDLINE (to avoid stdin/stdout)
-or USE_FDOPEN (to make stdin/stdout work in binary mode).  See the Think C
-entry for more details.
+You'll also need to define TWO_FILE_COMMANDLINE to avoid stdin/stdout.
+This means that when using the cjpeg/djpeg programs, you'll have to type the
+input and output file names in the "Arguments" text-edit box, rather than
+using the file radio buttons.  (Perhaps USE_FDOPEN or USE_SETMODE would
+eliminate the problem, but I haven't heard from anyone who's tried it.)
 
 On 680x0 Macs, Metrowerks defines type "double" as a 10-byte IEEE extended
 float.  jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power
 of 2.  Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
 
+The supplied configuration file jconfig.mac can be used for your jconfig.h;
+it includes all the recommended symbol definitions.  If you have AppleScript
+installed, you can run the supplied script makeproj.mac to create CodeWarrior
+project files for the library and the testbed applications, then build the
+library and applications.  (Thanks to Dan Sears and Don Agro for this nifty
+hack, which saves us from trying to maintain CodeWarrior project files as part
+of the IJG distribution...)
+
 
 Macintosh, Think C:
 
-Jim Brunner has prepared a Mac-style user interface for the IJG library.
-Unfortunately, the released version of it only works with pre-v5 libraries;
-still, it may be a useful starting point.  You can obtain Jim's additional
-source code from the Info-Mac archives, at sumex-aim.stanford.edu or mirrors
-thereof; see file /info-mac/dev/src/jpeg-convert-c.hqx.  Jim's documentation
-also includes more detailed build instructions for Think C.
+The documentation in Jim Brunner's "JPEG Convert" source code (see above)
+includes detailed build instructions for Think C; it's probably somewhat
+out of date for the current release, but may be helpful.
 
 If you want to build the minimal command line version, proceed as follows.
 You'll have to prepare project files for the programs; we don't include any
@@ -695,6 +731,9 @@ On 680x0 Macs, Think C defines type "double" as a 12-byte IEEE extended float.
 jmemmgr.c won't like this: it wants sizeof(ALIGN_TYPE) to be a power of 2.
 Add "#define ALIGN_TYPE long" to jconfig.h to eliminate the complaint.
 
+jconfig.mac should work as a jconfig.h configuration file for Think C,
+but the makeproj.mac AppleScript script is specific to CodeWarrior.  Sorry.
+
 
 MIPS R3000:
 
@@ -705,7 +744,7 @@ Note that the R3000 chip is found in workstations from DEC and others.
 
 MS-DOS, generic comments for 16-bit compilers:
 
-The IJG code is designed to be compiled in 80x86 "small" or "medium" memory
+The IJG code is designed to work well in 80x86 "small" or "medium" memory
 models (i.e., data pointers are 16 bits unless explicitly declared "far";
 code pointers can be either size).  You may be able to use small model to
 compile cjpeg or djpeg by itself, but you will probably have to use medium
@@ -721,7 +760,7 @@ The DOS-specific memory manager, jmemdos.c, should be used if possible.
 It needs some assembly-code routines which are in jmemdosa.asm; make sure
 your makefile assembles that file and includes it in the library.  If you
 don't have a suitable assembler, you can get pre-assembled object files for
-jmemdosa by FTP from ftp.uu.net: graphics/jpeg/jdosaobj.zip.  (DOS-oriented
+jmemdosa by FTP from ftp.uu.net:/graphics/jpeg/jdosaobj.zip.  (DOS-oriented
 distributions of the IJG source code often include these object files.)
 
 When using jmemdos.c, jconfig.h must define USE_MSDOS_MEMMGR and must set
@@ -778,31 +817,22 @@ jconfig.bcc already includes #define USE_SETMODE to make this work.
 (fdopen does not work correctly.)
 
 
-MS-DOS, DJGPP:
-
-Use a recent version of DJGPP (1.11 or better).  If you prefer two-file
-command line style, change the supplied jconfig.dj to define
-TWO_FILE_COMMANDLINE.  makefile.dj is set up to generate only COFF files
-(cjpeg, djpeg, etc) when you say make.  After testing, say "make exe" to
-make executables with stub.exe, or "make standalone" if you want executables
-that include go32.  You will probably need to tweak the makefile's pointer to
-go32.exe to do "make standalone".
-
-
 MS-DOS, Microsoft C:
 
-makefile.mc6 works with Microsoft C, Visual C++, etc.  Note that this
-makefile assumes that the working copy of itself is called "makefile".
-If you want to call it something else, say "makefile.mak", be sure to adjust
-the dependency line that reads "$(RFILE) : makefile".  Otherwise the make
-will fail because it doesn't know how to create "makefile".  Worse, some
-releases of Microsoft's make utilities give an incorrect error message in
-this situation.
+makefile.mc6 works with Microsoft C, DOS Visual C++, etc.  It should only
+be used if you want to build a 16-bit (small or medium memory model) program.
 
 If you want one-file command line style, just undefine TWO_FILE_COMMANDLINE.
 jconfig.mc6 already includes #define USE_SETMODE to make this work.
 (fdopen does not work correctly.)
 
+Note that this makefile assumes that the working copy of itself is called
+"makefile".  If you want to call it something else, say "makefile.mak",
+be sure to adjust the dependency line that reads "$(RFILE) : makefile".
+Otherwise the make will fail because it doesn't know how to create "makefile".
+Worse, some releases of Microsoft's make utilities give an incorrect error
+message in this situation.
+
 Old versions of MS C fail with an "out of macro expansion space" error
 because they can't cope with the macro TRACEMS8 (defined in jerror.h).
 If this happens to you, the easiest solution is to change TRACEMS8 to
@@ -813,11 +843,12 @@ Original MS C 6.0 is very buggy; it compiles incorrect code unless you turn
 off optimization entirely (remove -O from CFLAGS).  6.00A is better, but it
 still generates bad code if you enable loop optimizations (-Ol or -Ox).
 
-MS C 8.0 reportedly fails to compile jquant1.c if optimization is turned off
-(yes, off).
+MS C 8.0 crashes when compiling jquant1.c with optimization switch /Oo ...
+which is on by default.  To work around this bug, compile that one file
+with /Oo-.
 
 
-Microsoft Windows (all versions):
+Microsoft Windows (all versions), generic comments:
 
 Some Windows system include files define typedef boolean as "unsigned char".
 The IJG code also defines typedef boolean, but we make it "int" by default.
@@ -825,45 +856,86 @@ This doesn't affect the IJG programs because we don't import those Windows
 include files.  But if you use the JPEG library in your own program, and some
 of your program's files import one definition of boolean while some import the
 other, you can get all sorts of mysterious problems.  A good preventive step
-is to change jmorecfg.h to define boolean as unsigned char.  We recommend
-making that part of jmorecfg.h read like this:
+is to make the IJG library use "unsigned char" for boolean.  To do that,
+add something like this to your jconfig.h file:
+	/* Define "boolean" as unsigned char, not int, per Windows custom */
 	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
 	typedef unsigned char boolean;
 	#endif
-In v6a and later, using incompatible definitions of boolean will usually lead
-to the failure message "JPEG parameter struct mismatch", rather than the
-difficult-to-diagnose bugs it caused with earlier versions.
+	#define HAVE_BOOLEAN	/* prevent jmorecfg.h from redefining it */
+(This is already in jconfig.vc, by the way.)
+
+windef.h contains the declarations
+	#define far
+	#define FAR far
+Since jmorecfg.h tries to define FAR as empty, you may get a compiler
+warning if you include both jpeglib.h and windef.h (which windows.h
+includes).  To suppress the warning, you can put "#ifndef FAR"/"#endif"
+around the line "#define FAR" in jmorecfg.h.
 
 When using the library in a Windows application, you will almost certainly
 want to modify or replace the error handler module jerror.c, since our
 default error handler does a couple of inappropriate things:
   1. it tries to write error and warning messages on stderr;
   2. in event of a fatal error, it exits by calling exit().
+
 A simple stopgap solution for problem 1 is to replace the line
 	fprintf(stderr, "%s\n", buffer);
-(in output_message in jerror.c) with something like
-	MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK);
+(in output_message in jerror.c) with
+	MessageBox(GetActiveWindow(),buffer,"JPEG Error",MB_OK|MB_ICONERROR);
 It's highly recommended that you at least do that much, since otherwise
-error messages will disappear into nowhere.
+error messages will disappear into nowhere.  (Beginning with IJG v6b, this
+code is already present in jerror.c; just define USE_WINDOWS_MESSAGEBOX in
+jconfig.h to enable it.)
+
 The proper solution for problem 2 is to return control to your calling
 application after a library error.  This can be done with the setjmp/longjmp
-technique discussed in libjpeg.doc and illustrated in example.c.
+technique discussed in libjpeg.doc and illustrated in example.c.  (NOTE:
+some older Windows C compilers provide versions of setjmp/longjmp that
+don't actually work under Windows.  You may need to use the Windows system
+functions Catch and Throw instead.)
+
+The recommended memory manager under Windows is jmemnobs.c; in other words,
+let Windows do any virtual memory management needed.  You should NOT use
+jmemdos.c nor jmemdosa.asm under Windows.
+
+For Windows 3.1, we recommend compiling in medium or large memory model;
+for newer Windows versions, use a 32-bit flat memory model.  (See the MS-DOS
+sections above for more info about memory models.)  In the 16-bit memory
+models only, you'll need to put
+	#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+into jconfig.h to limit allocation chunks to 64Kb.  (Without that, you'd
+have to use huge memory model, which slows things down unnecessarily.)
+jmemnobs.c works without modification in large or flat memory models, but to
+use medium model, you need to modify its jpeg_get_large and jpeg_free_large
+routines to allocate far memory.  In any case, you might like to replace
+its calls to malloc and free with direct calls on Windows memory allocation
+functions.
 
 You may also want to modify jdatasrc.c and jdatadst.c to use Windows file
 operations rather than fread/fwrite.  This is only necessary if your C
 compiler doesn't provide a competent implementation of C stdio functions.
 
+You might want to tweak the RGB_xxx macros in jmorecfg.h so that the library
+will accept or deliver color pixels in BGR sample order, not RGB; BGR order
+is usually more convenient under Windows.  Note that this change will break
+the sample applications cjpeg/djpeg, but the library itself works fine.
+
+
 Many people want to convert the IJG library into a DLL.  This is reasonably
 straightforward, but watch out for the following:
+
   1. Don't try to compile as a DLL in small or medium memory model; use
 large model, or even better, 32-bit flat model.  Many places in the IJG code
 assume the address of a local variable is an ordinary (not FAR) pointer;
 that isn't true in a medium-model DLL.
+
   2. Microsoft C cannot pass file pointers between applications and DLLs.
 (See Microsoft Knowledge Base, PSS ID Number Q50336.)  So jdatasrc.c and
 jdatadst.c don't work if you open a file in your application and then pass
 the pointer to the DLL.  One workaround is to make jdatasrc.c/jdatadst.c
 part of your main application rather than part of the DLL.
+
   3. You'll probably need to modify the macros GLOBAL() and EXTERN() to
 attach suitable linkage keywords to the exported routine names.  Similarly,
 you'll want to modify METHODDEF() and JMETHOD() to ensure function pointers
@@ -871,10 +943,13 @@ are declared in a way that lets application routines be called back through
 the function pointers.  These macros are in jmorecfg.h.  Typical definitions
 for a 16-bit DLL are:
 	#define GLOBAL(type)		type _far _pascal _loadds _export
-	#define EXTERN(type)		extern type _far _pascal
+	#define EXTERN(type)		extern type _far _pascal _loadds
 	#define METHODDEF(type)		static type _far _pascal
 	#define JMETHOD(type,methodname,arglist)  \
 		type (_far _pascal *methodname) arglist
+For a 32-bit DLL you may want something like
+	#define GLOBAL(type)		__declspec(dllexport) type
+	#define EXTERN(type)		extern __declspec(dllexport) type
 Although not all the GLOBAL routines are actually intended to be called by
 the application, the performance cost of making them all DLL entry points is
 negligible.
@@ -888,6 +963,12 @@ but hasn't been very high priority --- any volunteers out there?
 
 Microsoft Windows, Borland C:
 
+The provided jconfig.bcc should work OK in a 32-bit Windows environment,
+but you'll need to tweak it in a 16-bit environment (you'd need to define
+NEED_FAR_POINTERS and MAX_ALLOC_CHUNK).  Beware that makefile.bcc will need
+alteration if you want to use it for Windows --- in particular, you should
+use jmemnobs.c not jmemdos.c under Windows.
+
 Borland C++ 4.5 fails with an internal compiler error when trying to compile
 jdmerge.c in 32-bit mode.  If enough people complain, perhaps Borland will fix
 it.  In the meantime, the simplest known workaround is to add a redundant
@@ -902,6 +983,57 @@ doesn't trigger the bug.
 Recent reports suggest that this bug does not occur with "bcc32a" (the
 Pentium-optimized version of the compiler).
 
+Another report from a user of Borland C 4.5 was that incorrect code (leading
+to a color shift in processed images) was produced if any of the following
+optimization switch combinations were used: 
+	-Ot -Og
+	-Ot -Op
+	-Ot -Om
+So try backing off on optimization if you see such a problem.  (Are there
+several different releases all numbered "4.5"??)
+
+
+Microsoft Windows, Microsoft Visual C++:
+
+jconfig.vc should work OK with any Microsoft compiler for a 32-bit memory
+model.  makefile.vc is intended for command-line use.  (If you are using
+the Developer Studio environment, you may prefer the DevStudio project
+files; see below.)
+
+Some users feel that it's easier to call the library from C++ code if you
+force VC++ to treat the library as C++ code, which you can do by renaming
+all the *.c files to *.cpp (and adjusting the makefile to match).  This
+avoids the need to put extern "C" { ... } around #include "jpeglib.h" in
+your C++ application.
+
+
+Microsoft Windows, Microsoft Developer Studio:
+
+We include makefiles that should work as project files in DevStudio 4.2 or
+later.  There is a library makefile that builds the IJG library as a static
+Win32 library, and an application makefile that builds the sample applications
+as Win32 console applications.  (Even if you only want the library, we
+recommend building the applications so that you can run the self-test.)
+
+To use:
+1. Copy jconfig.vc to jconfig.h, makelib.ds to jpeg.mak, and
+   makeapps.ds to apps.mak.  (Note that the renaming is critical!)
+2. Click on the .mak files to construct project workspaces.
+   (If you are using DevStudio more recent than 4.2, you'll probably
+   get a message saying that the makefiles are being updated.)
+3. Build the library project, then the applications project.
+4. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
+5. To perform the self-test, execute the command line
+	NMAKE /f makefile.vc  test
+
+
+OS/2, Borland C++:
+
+Watch out for optimization bugs in older Borland compilers; you may need
+to back off the optimization switch settings.  See the comments in
+makefile.bcc.
+
 
 SGI:
 

jcapimin.c

@@ -1,7 +1,7 @@
 /*
  * jcapimin.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,13 +39,18 @@ jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
     ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
 	     (int) SIZEOF(struct jpeg_compress_struct), (int) structsize);
 
-  /* For debugging purposes, zero the whole master structure.
-   * But error manager pointer is already there, so save and restore it.
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
    */
   {
     struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
     MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct));
     cinfo->err = err;
+    cinfo->client_data = client_data;
   }
   cinfo->is_decompressor = FALSE;
 
@@ -66,6 +71,8 @@ jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
     cinfo->ac_huff_tbl_ptrs[i] = NULL;
   }
 
+  cinfo->script_space = NULL;
+
   cinfo->input_gamma = 1.0;	/* in case application forgets */
 
   /* OK, I'm ready */
@@ -185,13 +192,40 @@ GLOBAL(void)
 jpeg_write_marker (j_compress_ptr cinfo, int marker,
 		   const JOCTET *dataptr, unsigned int datalen)
 {
+  JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val));
+
   if (cinfo->next_scanline != 0 ||
       (cinfo->global_state != CSTATE_SCANNING &&
        cinfo->global_state != CSTATE_RAW_OK &&
        cinfo->global_state != CSTATE_WRCOEFS))
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
-  (*cinfo->marker->write_any_marker) (cinfo, marker, dataptr, datalen);
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+  write_marker_byte = cinfo->marker->write_marker_byte;	/* copy for speed */
+  while (datalen--) {
+    (*write_marker_byte) (cinfo, *dataptr);
+    dataptr++;
+  }
+}
+
+/* Same, but piecemeal. */
+
+GLOBAL(void)
+jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
+{
+  if (cinfo->next_scanline != 0 ||
+      (cinfo->global_state != CSTATE_SCANNING &&
+       cinfo->global_state != CSTATE_RAW_OK &&
+       cinfo->global_state != CSTATE_WRCOEFS))
+    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+
+  (*cinfo->marker->write_marker_header) (cinfo, marker, datalen);
+}
+
+GLOBAL(void)
+jpeg_write_m_byte (j_compress_ptr cinfo, int val)
+{
+  (*cinfo->marker->write_marker_byte) (cinfo, val);
 }
 
 
@@ -231,6 +265,16 @@ jpeg_write_tables (j_compress_ptr cinfo)
   (*cinfo->marker->write_tables_only) (cinfo);
   /* And clean up. */
   (*cinfo->dest->term_destination) (cinfo);
-  /* We can use jpeg_abort to release memory. */
-  jpeg_abort((j_common_ptr) cinfo);
+  /*
+   * In library releases up through v6a, we called jpeg_abort() here to free
+   * any working memory allocated by the destination manager and marker
+   * writer.  Some applications had a problem with that: they allocated space
+   * of their own from the library memory manager, and didn't want it to go
+   * away during write_tables.  So now we do nothing.  This will cause a
+   * memory leak if an app calls write_tables repeatedly without doing a full
+   * compression cycle or otherwise resetting the JPEG object.  However, that
+   * seems less bad than unexpectedly freeing memory in the normal case.
+   * An app that prefers the old behavior can call jpeg_abort for itself after
+   * each call to jpeg_write_tables().
+   */
 }

jccoefct.c

@@ -1,7 +1,7 @@
 /*
  * jccoefct.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -135,8 +135,8 @@ start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
  * per call, ie, v_samp_factor block rows for each component in the image.
  * Returns TRUE if the iMCU row is completed, FALSE if suspended.
  *
- * NB: input_buf contains a plane for each component in image.
- * For single pass, this is the same as the components in the scan.
+ * NB: input_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
  */
 
 METHODDEF(boolean)
@@ -175,7 +175,8 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
 	  if (coef->iMCU_row_num < last_iMCU_row ||
 	      yoffset+yindex < compptr->last_row_height) {
 	    (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-					 input_buf[ci], coef->MCU_buffer[blkn],
+					 input_buf[compptr->component_index],
+					 coef->MCU_buffer[blkn],
 					 ypos, xpos, (JDIMENSION) blockcnt);
 	    if (blockcnt < compptr->MCU_width) {
 	      /* Create some dummy blocks at the right edge of the image. */

jccolor.c

@@ -2,6 +2,8 @@
  * jccolor.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright 2009 D. R. Commander
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -11,6 +13,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jsimd.h"
 
 
 /* Private subobject */
@@ -78,6 +81,74 @@ typedef my_color_converter * my_cconvert_ptr;
 #define TABLE_SIZE	(8*(MAXJSAMPLE+1))
 
 
+#if BITS_IN_JSAMPLE == 8
+
+const unsigned char red_lut[256] = {
+  0 , 0 , 1 , 1 , 1 , 1 , 2 , 2 , 2 , 3 , 3 , 3 , 4 , 4 , 4 , 4 ,
+  5 , 5 , 5 , 6 , 6 , 6 , 7 , 7 , 7 , 7 , 8 , 8 , 8 , 9 , 9 , 9 ,
+  10, 10, 10, 10, 11, 11, 11, 12, 12, 12, 13, 13, 13, 13, 14, 14,
+  14, 15, 15, 15, 16, 16, 16, 16, 17, 17, 17, 18, 18, 18, 19, 19,
+  19, 19, 20, 20, 20, 21, 21, 21, 22, 22, 22, 22, 23, 23, 23, 24,
+  24, 24, 25, 25, 25, 25, 26, 26, 26, 27, 27, 27, 28, 28, 28, 28,
+  29, 29, 29, 30, 30, 30, 30, 31, 31, 31, 32, 32, 32, 33, 33, 33,
+  33, 34, 34, 34, 35, 35, 35, 36, 36, 36, 36, 37, 37, 37, 38, 38,
+  38, 39, 39, 39, 39, 40, 40, 40, 41, 41, 41, 42, 42, 42, 42, 43,
+  43, 43, 44, 44, 44, 45, 45, 45, 45, 46, 46, 46, 47, 47, 47, 48,
+  48, 48, 48, 49, 49, 49, 50, 50, 50, 51, 51, 51, 51, 52, 52, 52,
+  53, 53, 53, 54, 54, 54, 54, 55, 55, 55, 56, 56, 56, 57, 57, 57,
+  57, 58, 58, 58, 59, 59, 59, 60, 60, 60, 60, 61, 61, 61, 62, 62,
+  62, 62, 63, 63, 63, 64, 64, 64, 65, 65, 65, 65, 66, 66, 66, 67,
+  67, 67, 68, 68, 68, 68, 69, 69, 69, 70, 70, 70, 71, 71, 71, 71,
+  72, 72, 72, 73, 73, 73, 74, 74, 74, 74, 75, 75, 75, 76, 76, 76
+};
+
+const unsigned char green_lut[256] = {
+  0  , 1  , 1  , 2  , 2  , 3  , 4  , 4  , 5  , 5  , 6  , 6  ,
+  7  , 8  , 8  , 9  , 9  , 10 , 11 , 11 , 12 , 12 , 13 , 14 ,
+  14 , 15 , 15 , 16 , 16 , 17 , 18 , 18 , 19 , 19 , 20 , 21 ,
+  21 , 22 , 22 , 23 , 23 , 24 , 25 , 25 , 26 , 26 , 27 , 28 ,
+  28 , 29 , 29 , 30 , 31 , 31 , 32 , 32 , 33 , 33 , 34 , 35 ,
+  35 , 36 , 36 , 37 , 38 , 38 , 39 , 39 , 40 , 41 , 41 , 42 ,
+  42 , 43 , 43 , 44 , 45 , 45 , 46 , 46 , 47 , 48 , 48 , 49 ,
+  49 , 50 , 50 , 51 , 52 , 52 , 53 , 53 , 54 , 55 , 55 , 56 ,
+  56 , 57 , 58 , 58 , 59 , 59 , 60 , 60 , 61 , 62 , 62 , 63 ,
+  63 , 64 , 65 , 65 , 66 , 66 , 67 , 68 , 68 , 69 , 69 , 70 ,
+  70 , 71 , 72 , 72 , 73 , 73 , 74 , 75 , 75 , 76 , 76 , 77 ,
+  77 , 78 , 79 , 79 , 80 , 80 , 81 , 82 , 82 , 83 , 83 , 84 ,
+  85 , 85 , 86 , 86 , 87 , 87 , 88 , 89 , 89 , 90 , 90 , 91 ,
+  92 , 92 , 93 , 93 , 94 , 95 , 95 , 96 , 96 , 97 , 97 , 98 ,
+  99 , 99 , 100, 100, 101, 102, 102, 103, 103, 104, 104, 105,
+  106, 106, 107, 107, 108, 109, 109, 110, 110, 111, 112, 112,
+  113, 113, 114, 114, 115, 116, 116, 117, 117, 118, 119, 119,
+  120, 120, 121, 122, 122, 123, 123, 124, 124, 125, 126, 126,
+  127, 127, 128, 129, 129, 130, 130, 131, 131, 132, 133, 133,
+  34, 134, 135, 136, 136, 137, 137, 138, 139, 139, 140, 140,
+  141, 141, 142, 143, 143, 144, 144, 145, 146, 146, 147, 147,
+  148, 149, 149, 150
+};
+
+const unsigned char blue_lut[256] = {
+  0 , 0 , 0 , 0 , 0 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 2 , 2 ,
+  2 , 2 , 2 , 2 , 2 , 2 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 4 ,
+  4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 5 , 5 , 5 , 5 , 5 , 5 , 5 , 5 ,
+  5 , 6 , 6 , 6 , 6 , 6 , 6 , 6 , 6 , 6 , 7 , 7 , 7 , 7 , 7 , 7 ,
+  7 , 7 , 8 , 8 , 8 , 8 , 8 , 8 , 8 , 8 , 8 , 9 , 9 , 9 , 9 , 9 ,
+  9 , 9 , 9 , 9 , 10, 10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11,
+  11, 11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13,
+  13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14,
+  15, 15, 15, 15, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
+  16, 17, 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18,
+  18, 18, 18, 19, 19, 19, 19, 19, 19, 19, 19, 19, 20, 20, 20, 20,
+  20, 20, 20, 20, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22,
+  22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, 23, 24,
+  24, 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25,
+  26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27,
+  27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29
+};
+
+#endif
+
+
 /*
  * Initialize for RGB->YCC colorspace conversion.
  */
@@ -146,10 +217,10 @@ rgb_ycc_convert (j_compress_ptr cinfo,
     outptr2 = output_buf[2][output_row];
     output_row++;
     for (col = 0; col < num_cols; col++) {
-      r = GETJSAMPLE(inptr[RGB_RED]);
-      g = GETJSAMPLE(inptr[RGB_GREEN]);
-      b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
+      r = GETJSAMPLE(inptr[rgb_red[cinfo->in_color_space]]);
+      g = GETJSAMPLE(inptr[rgb_green[cinfo->in_color_space]]);
+      b = GETJSAMPLE(inptr[rgb_blue[cinfo->in_color_space]]);
+      inptr += rgb_pixelsize[cinfo->in_color_space];
       /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
        * must be too; we do not need an explicit range-limiting operation.
        * Hence the value being shifted is never negative, and we don't
@@ -188,26 +259,36 @@ rgb_gray_convert (j_compress_ptr cinfo,
 		  JDIMENSION output_row, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
+  #if BITS_IN_JSAMPLE != 8
   register INT32 * ctab = cconvert->rgb_ycc_tab;
+  #endif
   register JSAMPROW inptr;
   register JSAMPROW outptr;
+  JSAMPLE *maxoutptr;
   register JDIMENSION col;
   JDIMENSION num_cols = cinfo->image_width;
+  int rindex = rgb_red[cinfo->in_color_space];
+  int gindex = rgb_green[cinfo->in_color_space];
+  int bindex = rgb_blue[cinfo->in_color_space];
+  int rgbstride = rgb_pixelsize[cinfo->in_color_space];
 
   while (--num_rows >= 0) {
     inptr = *input_buf++;
     outptr = output_buf[0][output_row];
+    maxoutptr = &outptr[num_cols];
     output_row++;
-    for (col = 0; col < num_cols; col++) {
-      r = GETJSAMPLE(inptr[RGB_RED]);
-      g = GETJSAMPLE(inptr[RGB_GREEN]);
-      b = GETJSAMPLE(inptr[RGB_BLUE]);
-      inptr += RGB_PIXELSIZE;
+    for (; outptr < maxoutptr; outptr++, inptr += rgbstride) {
       /* Y */
-      outptr[col] = (JSAMPLE)
-		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
-		 >> SCALEBITS);
+      #if BITS_IN_JSAMPLE == 8
+      *outptr = red_lut[inptr[rindex]] + green_lut[inptr[gindex]]
+	    + blue_lut[inptr[bindex]];
+      #else
+      *outptr = (JSAMPLE)
+	    ((ctab[GETJSAMPLE(inptr[rindex])+R_Y_OFF]
+	     + ctab[GETJSAMPLE(inptr[gindex])+G_Y_OFF]
+	     + ctab[GETJSAMPLE(inptr[bindex])+B_Y_OFF])
+	     >> SCALEBITS);
+      #endif
     }
   }
 }
@@ -368,11 +449,15 @@ jinit_color_converter (j_compress_ptr cinfo)
     break;
 
   case JCS_RGB:
-#if RGB_PIXELSIZE != 3
-    if (cinfo->input_components != RGB_PIXELSIZE)
+  case JCS_EXT_RGB:
+  case JCS_EXT_RGBX:
+  case JCS_EXT_BGR:
+  case JCS_EXT_BGRX:
+  case JCS_EXT_XBGR:
+  case JCS_EXT_XRGB:
+    if (cinfo->input_components != rgb_pixelsize[cinfo->in_color_space])
       ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
     break;
-#endif /* else share code with YCbCr */
 
   case JCS_YCbCr:
     if (cinfo->input_components != 3)
@@ -398,7 +483,13 @@ jinit_color_converter (j_compress_ptr cinfo)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
     if (cinfo->in_color_space == JCS_GRAYSCALE)
       cconvert->pub.color_convert = grayscale_convert;
-    else if (cinfo->in_color_space == JCS_RGB) {
+    else if (cinfo->in_color_space == JCS_RGB ||
+             cinfo->in_color_space == JCS_EXT_RGB ||
+             cinfo->in_color_space == JCS_EXT_RGBX ||
+             cinfo->in_color_space == JCS_EXT_BGR ||
+             cinfo->in_color_space == JCS_EXT_BGRX ||
+             cinfo->in_color_space == JCS_EXT_XBGR ||
+             cinfo->in_color_space == JCS_EXT_XRGB) {
       cconvert->pub.start_pass = rgb_ycc_start;
       cconvert->pub.color_convert = rgb_gray_convert;
     } else if (cinfo->in_color_space == JCS_YCbCr)
@@ -408,9 +499,16 @@ jinit_color_converter (j_compress_ptr cinfo)
     break;
 
   case JCS_RGB:
+  case JCS_EXT_RGB:
+  case JCS_EXT_RGBX:
+  case JCS_EXT_BGR:
+  case JCS_EXT_BGRX:
+  case JCS_EXT_XBGR:
+  case JCS_EXT_XRGB:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3)
+    if (cinfo->in_color_space == cinfo->jpeg_color_space &&
+      rgb_pixelsize[cinfo->in_color_space] == 3)
       cconvert->pub.color_convert = null_convert;
     else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
@@ -419,9 +517,19 @@ jinit_color_converter (j_compress_ptr cinfo)
   case JCS_YCbCr:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB) {
-      cconvert->pub.start_pass = rgb_ycc_start;
-      cconvert->pub.color_convert = rgb_ycc_convert;
+    if (cinfo->in_color_space == JCS_RGB ||
+        cinfo->in_color_space == JCS_EXT_RGB ||
+        cinfo->in_color_space == JCS_EXT_RGBX ||
+        cinfo->in_color_space == JCS_EXT_BGR ||
+        cinfo->in_color_space == JCS_EXT_BGRX ||
+        cinfo->in_color_space == JCS_EXT_XBGR ||
+        cinfo->in_color_space == JCS_EXT_XRGB) {
+      if (jsimd_can_rgb_ycc())
+        cconvert->pub.color_convert = jsimd_rgb_ycc_convert;
+      else {
+        cconvert->pub.start_pass = rgb_ycc_start;
+        cconvert->pub.color_convert = rgb_ycc_convert;
+      }
     } else if (cinfo->in_color_space == JCS_YCbCr)
       cconvert->pub.color_convert = null_convert;
     else

jcdctmgr.c

@@ -2,6 +2,8 @@
  * jcdctmgr.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -15,15 +17,35 @@
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jdct.h"		/* Private declarations for DCT subsystem */
+#include "jsimddct.h"
 
 
 /* Private subobject for this module */
 
+typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data));
+typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data));
+
+typedef JMETHOD(void, convsamp_method_ptr,
+                (JSAMPARRAY sample_data, JDIMENSION start_col,
+                 DCTELEM * workspace));
+typedef JMETHOD(void, float_convsamp_method_ptr,
+                (JSAMPARRAY sample_data, JDIMENSION start_col,
+                 FAST_FLOAT *workspace));
+
+typedef JMETHOD(void, quantize_method_ptr,
+                (JCOEFPTR coef_block, DCTELEM * divisors,
+                 DCTELEM * workspace));
+typedef JMETHOD(void, float_quantize_method_ptr,
+                (JCOEFPTR coef_block, FAST_FLOAT * divisors,
+                 FAST_FLOAT * workspace));
+
 typedef struct {
   struct jpeg_forward_dct pub;	/* public fields */
 
   /* Pointer to the DCT routine actually in use */
-  forward_DCT_method_ptr do_dct;
+  forward_DCT_method_ptr dct;
+  convsamp_method_ptr convsamp;
+  quantize_method_ptr quantize;
 
   /* The actual post-DCT divisors --- not identical to the quant table
    * entries, because of scaling (especially for an unnormalized DCT).
@@ -31,16 +53,144 @@ typedef struct {
    */
   DCTELEM * divisors[NUM_QUANT_TBLS];
 
+  /* work area for FDCT subroutine */
+  DCTELEM * workspace;
+
 #ifdef DCT_FLOAT_SUPPORTED
   /* Same as above for the floating-point case. */
-  float_DCT_method_ptr do_float_dct;
+  float_DCT_method_ptr float_dct;
+  float_convsamp_method_ptr float_convsamp;
+  float_quantize_method_ptr float_quantize;
   FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
+  FAST_FLOAT * float_workspace;
 #endif
 } my_fdct_controller;
 
 typedef my_fdct_controller * my_fdct_ptr;
 
 
+/*
+ * Find the highest bit in an integer through binary search.
+ */
+LOCAL(int)
+flss (UINT16 val)
+{
+  int bit;
+
+  bit = 16;
+
+  if (!val)
+    return 0;
+
+  if (!(val & 0xff00)) {
+    bit -= 8;
+    val <<= 8;
+  }
+  if (!(val & 0xf000)) {
+    bit -= 4;
+    val <<= 4;
+  }
+  if (!(val & 0xc000)) {
+    bit -= 2;
+    val <<= 2;
+  }
+  if (!(val & 0x8000)) {
+    bit -= 1;
+    val <<= 1;
+  }
+
+  return bit;
+}
+
+/*
+ * Compute values to do a division using reciprocal.
+ *
+ * This implementation is based on an algorithm described in
+ *   "How to optimize for the Pentium family of microprocessors"
+ *   (http://www.agner.org/assem/).
+ * More information about the basic algorithm can be found in
+ * the paper "Integer Division Using Reciprocals" by Robert Alverson.
+ *
+ * The basic idea is to replace x/d by x * d^-1. In order to store
+ * d^-1 with enough precision we shift it left a few places. It turns
+ * out that this algoright gives just enough precision, and also fits
+ * into DCTELEM:
+ *
+ *   b = (the number of significant bits in divisor) - 1
+ *   r = (word size) + b
+ *   f = 2^r / divisor
+ *
+ * f will not be an integer for most cases, so we need to compensate
+ * for the rounding error introduced:
+ *
+ *   no fractional part:
+ *
+ *       result = input >> r
+ *
+ *   fractional part of f < 0.5:
+ *
+ *       round f down to nearest integer
+ *       result = ((input + 1) * f) >> r
+ *
+ *   fractional part of f > 0.5:
+ *
+ *       round f up to nearest integer
+ *       result = (input * f) >> r
+ *
+ * This is the original algorithm that gives truncated results. But we
+ * want properly rounded results, so we replace "input" with
+ * "input + divisor/2".
+ *
+ * In order to allow SIMD implementations we also tweak the values to
+ * allow the same calculation to be made at all times:
+ * 
+ *   dctbl[0] = f rounded to nearest integer
+ *   dctbl[1] = divisor / 2 (+ 1 if fractional part of f < 0.5)
+ *   dctbl[2] = 1 << ((word size) * 2 - r)
+ *   dctbl[3] = r - (word size)
+ *
+ * dctbl[2] is for stupid instruction sets where the shift operation
+ * isn't member wise (e.g. MMX).
+ *
+ * The reason dctbl[2] and dctbl[3] reduce the shift with (word size)
+ * is that most SIMD implementations have a "multiply and store top
+ * half" operation.
+ *
+ * Lastly, we store each of the values in their own table instead
+ * of in a consecutive manner, yet again in order to allow SIMD
+ * routines.
+ */
+LOCAL(void)
+compute_reciprocal (UINT16 divisor, DCTELEM * dtbl)
+{
+  UDCTELEM2 fq, fr;
+  UDCTELEM c;
+  int b, r;
+
+  b = flss(divisor) - 1;
+  r  = sizeof(DCTELEM) * 8 + b;
+
+  fq = ((UDCTELEM2)1 << r) / divisor;
+  fr = ((UDCTELEM2)1 << r) % divisor;
+
+  c = divisor / 2; /* for rounding */
+
+  if (fr == 0) { /* divisor is power of two */
+    /* fq will be one bit too large to fit in DCTELEM, so adjust */
+    fq >>= 1;
+    r--;
+  } else if (fr <= (divisor / 2)) { /* fractional part is < 0.5 */
+    c++;
+  } else { /* fractional part is > 0.5 */
+    fq++;
+  }
+
+  dtbl[DCTSIZE2 * 0] = (DCTELEM) fq;      /* reciprocal */
+  dtbl[DCTSIZE2 * 1] = (DCTELEM) c;       /* correction + roundfactor */
+  dtbl[DCTSIZE2 * 2] = (DCTELEM) (1 << (sizeof(DCTELEM)*8*2 - r));  /* scale */
+  dtbl[DCTSIZE2 * 3] = (DCTELEM) r - sizeof(DCTELEM)*8; /* shift */
+}
+
 /*
  * Initialize for a processing pass.
  * Verify that all referenced Q-tables are present, and set up
@@ -78,11 +228,11 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
       if (fdct->divisors[qtblno] == NULL) {
 	fdct->divisors[qtblno] = (DCTELEM *)
 	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      DCTSIZE2 * SIZEOF(DCTELEM));
+				      (DCTSIZE2 * 4) * SIZEOF(DCTELEM));
       }
       dtbl = fdct->divisors[qtblno];
       for (i = 0; i < DCTSIZE2; i++) {
-	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
+	compute_reciprocal(qtbl->quantval[i] << 3, &dtbl[i]);
       }
       break;
 #endif
@@ -112,14 +262,14 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 	if (fdct->divisors[qtblno] == NULL) {
 	  fdct->divisors[qtblno] = (DCTELEM *)
 	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(DCTELEM));
+					(DCTSIZE2 * 4) * SIZEOF(DCTELEM));
 	}
 	dtbl = fdct->divisors[qtblno];
 	for (i = 0; i < DCTSIZE2; i++) {
-	  dtbl[i] = (DCTELEM)
+	  compute_reciprocal(
 	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
 				  (INT32) aanscales[i]),
-		    CONST_BITS-3);
+		    CONST_BITS-3), &dtbl[i]);
 	}
       }
       break;
@@ -168,6 +318,77 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 }
 
 
+/*
+ * Load data into workspace, applying unsigned->signed conversion.
+ */
+
+METHODDEF(void)
+convsamp (JSAMPARRAY sample_data, JDIMENSION start_col, DCTELEM * workspace)
+{
+  register DCTELEM *workspaceptr;
+  register JSAMPROW elemptr;
+  register int elemr;
+
+  workspaceptr = workspace;
+  for (elemr = 0; elemr < DCTSIZE; elemr++) {
+    elemptr = sample_data[elemr] + start_col;
+
+#if DCTSIZE == 8		/* unroll the inner loop */
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+#else
+    {
+      register int elemc;
+      for (elemc = DCTSIZE; elemc > 0; elemc--)
+        *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
+    }
+#endif
+  }
+}
+
+
+/*
+ * Quantize/descale the coefficients, and store into coef_blocks[].
+ */
+
+METHODDEF(void)
+quantize (JCOEFPTR coef_block, DCTELEM * divisors, DCTELEM * workspace)
+{
+  int i;
+  DCTELEM temp;
+  UDCTELEM recip, corr, shift;
+  UDCTELEM2 product;
+  JCOEFPTR output_ptr = coef_block;
+
+  for (i = 0; i < DCTSIZE2; i++) {
+    temp = workspace[i];
+    recip = divisors[i + DCTSIZE2 * 0];
+    corr =  divisors[i + DCTSIZE2 * 1];
+    shift = divisors[i + DCTSIZE2 * 3];
+
+    if (temp < 0) {
+      temp = -temp;
+      product = (UDCTELEM2)(temp + corr) * recip;
+      product >>= shift + sizeof(DCTELEM)*8;
+      temp = product;
+      temp = -temp;
+    } else {
+      product = (UDCTELEM2)(temp + corr) * recip;
+      product >>= shift + sizeof(DCTELEM)*8;
+      temp = product;
+    }
+
+    output_ptr[i] = (JCOEF) temp;
+  }
+}
+
+
 /*
  * Perform forward DCT on one or more blocks of a component.
  *
@@ -185,87 +406,87 @@ forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   /* This routine is heavily used, so it's worth coding it tightly. */
   my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  forward_DCT_method_ptr do_dct = fdct->do_dct;
   DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
-  DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
+  DCTELEM * workspace;
   JDIMENSION bi;
 
+  /* Make sure the compiler doesn't look up these every pass */
+  forward_DCT_method_ptr do_dct = fdct->dct;
+  convsamp_method_ptr do_convsamp = fdct->convsamp;
+  quantize_method_ptr do_quantize = fdct->quantize;
+  workspace = fdct->workspace;
+
   sample_data += start_row;	/* fold in the vertical offset once */
 
   for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
     /* Load data into workspace, applying unsigned->signed conversion */
-    { register DCTELEM *workspaceptr;
-      register JSAMPROW elemptr;
-      register int elemr;
-
-      workspaceptr = workspace;
-      for (elemr = 0; elemr < DCTSIZE; elemr++) {
-	elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8		/* unroll the inner loop */
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	*workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-#else
-	{ register int elemc;
-	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
-	    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-	  }
-	}
-#endif
-      }
-    }
+    (*do_convsamp) (sample_data, start_col, workspace);
 
     /* Perform the DCT */
     (*do_dct) (workspace);
 
     /* Quantize/descale the coefficients, and store into coef_blocks[] */
-    { register DCTELEM temp, qval;
-      register int i;
-      register JCOEFPTR output_ptr = coef_blocks[bi];
-
-      for (i = 0; i < DCTSIZE2; i++) {
-	qval = divisors[i];
-	temp = workspace[i];
-	/* Divide the coefficient value by qval, ensuring proper rounding.
-	 * Since C does not specify the direction of rounding for negative
-	 * quotients, we have to force the dividend positive for portability.
-	 *
-	 * In most files, at least half of the output values will be zero
-	 * (at default quantization settings, more like three-quarters...)
-	 * so we should ensure that this case is fast.  On many machines,
-	 * a comparison is enough cheaper than a divide to make a special test
-	 * a win.  Since both inputs will be nonnegative, we need only test
-	 * for a < b to discover whether a/b is 0.
-	 * If your machine's division is fast enough, define FAST_DIVIDE.
-	 */
-#ifdef FAST_DIVIDE
-#define DIVIDE_BY(a,b)	a /= b
-#else
-#define DIVIDE_BY(a,b)	if (a >= b) a /= b; else a = 0
-#endif
-	if (temp < 0) {
-	  temp = -temp;
-	  temp += qval>>1;	/* for rounding */
-	  DIVIDE_BY(temp, qval);
-	  temp = -temp;
-	} else {
-	  temp += qval>>1;	/* for rounding */
-	  DIVIDE_BY(temp, qval);
-	}
-	output_ptr[i] = (JCOEF) temp;
-      }
-    }
+    (*do_quantize) (coef_blocks[bi], divisors, workspace);
   }
 }
 
 
 #ifdef DCT_FLOAT_SUPPORTED
 
+
+METHODDEF(void)
+convsamp_float (JSAMPARRAY sample_data, JDIMENSION start_col, FAST_FLOAT * workspace)
+{
+  register FAST_FLOAT *workspaceptr;
+  register JSAMPROW elemptr;
+  register int elemr;
+
+  workspaceptr = workspace;
+  for (elemr = 0; elemr < DCTSIZE; elemr++) {
+    elemptr = sample_data[elemr] + start_col;
+#if DCTSIZE == 8		/* unroll the inner loop */
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+#else
+    {
+      register int elemc;
+      for (elemc = DCTSIZE; elemc > 0; elemc--)
+        *workspaceptr++ = (FAST_FLOAT)
+                          (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
+    }
+#endif
+  }
+}
+
+
+METHODDEF(void)
+quantize_float (JCOEFPTR coef_block, FAST_FLOAT * divisors, FAST_FLOAT * workspace)
+{
+  register FAST_FLOAT temp;
+  register int i;
+  register JCOEFPTR output_ptr = coef_block;
+
+  for (i = 0; i < DCTSIZE2; i++) {
+    /* Apply the quantization and scaling factor */
+    temp = workspace[i] * divisors[i];
+
+    /* Round to nearest integer.
+     * Since C does not specify the direction of rounding for negative
+     * quotients, we have to force the dividend positive for portability.
+     * The maximum coefficient size is +-16K (for 12-bit data), so this
+     * code should work for either 16-bit or 32-bit ints.
+     */
+    output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
+  }
+}
+
+
 METHODDEF(void)
 forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
 		   JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
@@ -275,62 +496,28 @@ forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   /* This routine is heavily used, so it's worth coding it tightly. */
   my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  float_DCT_method_ptr do_dct = fdct->do_float_dct;
   FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
-  FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
+  FAST_FLOAT * workspace;
   JDIMENSION bi;
 
+
+  /* Make sure the compiler doesn't look up these every pass */
+  float_DCT_method_ptr do_dct = fdct->float_dct;
+  float_convsamp_method_ptr do_convsamp = fdct->float_convsamp;
+  float_quantize_method_ptr do_quantize = fdct->float_quantize;
+  workspace = fdct->float_workspace;
+
   sample_data += start_row;	/* fold in the vertical offset once */
 
   for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
     /* Load data into workspace, applying unsigned->signed conversion */
-    { register FAST_FLOAT *workspaceptr;
-      register JSAMPROW elemptr;
-      register int elemr;
-
-      workspaceptr = workspace;
-      for (elemr = 0; elemr < DCTSIZE; elemr++) {
-	elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8		/* unroll the inner loop */
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	*workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-#else
-	{ register int elemc;
-	  for (elemc = DCTSIZE; elemc > 0; elemc--) {
-	    *workspaceptr++ = (FAST_FLOAT)
-	      (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-	  }
-	}
-#endif
-      }
-    }
+    (*do_convsamp) (sample_data, start_col, workspace);
 
     /* Perform the DCT */
     (*do_dct) (workspace);
 
     /* Quantize/descale the coefficients, and store into coef_blocks[] */
-    { register FAST_FLOAT temp;
-      register int i;
-      register JCOEFPTR output_ptr = coef_blocks[bi];
-
-      for (i = 0; i < DCTSIZE2; i++) {
-	/* Apply the quantization and scaling factor */
-	temp = workspace[i] * divisors[i];
-	/* Round to nearest integer.
-	 * Since C does not specify the direction of rounding for negative
-	 * quotients, we have to force the dividend positive for portability.
-	 * The maximum coefficient size is +-16K (for 12-bit data), so this
-	 * code should work for either 16-bit or 32-bit ints.
-	 */
-	output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
-      }
-    }
+    (*do_quantize) (coef_blocks[bi], divisors, workspace);
   }
 }
 
@@ -353,23 +540,33 @@ jinit_forward_dct (j_compress_ptr cinfo)
   cinfo->fdct = (struct jpeg_forward_dct *) fdct;
   fdct->pub.start_pass = start_pass_fdctmgr;
 
+  /* First determine the DCT... */
   switch (cinfo->dct_method) {
 #ifdef DCT_ISLOW_SUPPORTED
   case JDCT_ISLOW:
     fdct->pub.forward_DCT = forward_DCT;
-    fdct->do_dct = jpeg_fdct_islow;
+    if (jsimd_can_fdct_islow())
+      fdct->dct = jsimd_fdct_islow;
+    else
+      fdct->dct = jpeg_fdct_islow;
     break;
 #endif
 #ifdef DCT_IFAST_SUPPORTED
   case JDCT_IFAST:
     fdct->pub.forward_DCT = forward_DCT;
-    fdct->do_dct = jpeg_fdct_ifast;
+    if (jsimd_can_fdct_ifast())
+      fdct->dct = jsimd_fdct_ifast;
+    else
+      fdct->dct = jpeg_fdct_ifast;
     break;
 #endif
 #ifdef DCT_FLOAT_SUPPORTED
   case JDCT_FLOAT:
     fdct->pub.forward_DCT = forward_DCT_float;
-    fdct->do_float_dct = jpeg_fdct_float;
+    if (jsimd_can_fdct_float())
+      fdct->float_dct = jsimd_fdct_float;
+    else
+      fdct->float_dct = jpeg_fdct_float;
     break;
 #endif
   default:
@@ -377,6 +574,54 @@ jinit_forward_dct (j_compress_ptr cinfo)
     break;
   }
 
+  /* ...then the supporting stages. */
+  switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+  case JDCT_ISLOW:
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+  case JDCT_IFAST:
+#endif
+#if defined(DCT_ISLOW_SUPPORTED) || defined(DCT_IFAST_SUPPORTED)
+    if (jsimd_can_convsamp())
+      fdct->convsamp = jsimd_convsamp;
+    else
+      fdct->convsamp = convsamp;
+    if (jsimd_can_quantize())
+      fdct->quantize = jsimd_quantize;
+    else
+      fdct->quantize = quantize;
+    break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+  case JDCT_FLOAT:
+    if (jsimd_can_convsamp_float())
+      fdct->float_convsamp = jsimd_convsamp_float;
+    else
+      fdct->float_convsamp = convsamp_float;
+    if (jsimd_can_quantize_float())
+      fdct->float_quantize = jsimd_quantize_float;
+    else
+      fdct->float_quantize = quantize_float;
+    break;
+#endif
+  default:
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+    break;
+  }
+
+  /* Allocate workspace memory */
+#ifdef DCT_FLOAT_SUPPORTED
+  if (cinfo->dct_method == JDCT_FLOAT)
+    fdct->float_workspace = (FAST_FLOAT *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(FAST_FLOAT) * DCTSIZE2);
+  else
+#endif
+    fdct->workspace = (DCTELEM *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  SIZEOF(DCTELEM) * DCTSIZE2);
+
   /* Mark divisor tables unallocated */
   for (i = 0; i < NUM_QUANT_TBLS; i++) {
     fdct->divisors[i] = NULL;

jchuff.c

@@ -1,7 +1,7 @@
 /*
  * jchuff.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,11 +14,33 @@
  * permanent JPEG objects only upon successful completion of an MCU.
  */
 
+/* Modifications:
+ * Copyright (C)2007 Sun Microsystems, Inc.
+ * Copyright (C)2009 D. R. Commander
+ *
+ * This library is free software and may be redistributed and/or modified under
+ * the terms of the wxWindows Library License, Version 3.1 or (at your option)
+ * any later version.  The full license is in the LICENSE.txt file included
+ * with this distribution.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * wxWindows Library License for more details.
+ */
+
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jchuff.h"		/* Declarations shared with jcphuff.c */
+#include <limits.h>
 
+static unsigned char jpeg_first_bit_table[65536];
+int jpeg_first_bit_table_init=0;
+
+#ifndef min
+ #define min(a,b) ((a)<(b)?(a):(b))
+#endif
 
 /* Expanded entropy encoder object for Huffman encoding.
  *
@@ -27,7 +49,7 @@
  */
 
 typedef struct {
-  INT32 put_buffer;		/* current bit-accumulation buffer */
+  long put_buffer;		/* current bit-accumulation buffer */
   int put_bits;			/* # of bits now in it */
   int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
 } savable_state;
@@ -125,16 +147,14 @@ start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
     compptr = cinfo->cur_comp_info[ci];
     dctbl = compptr->dc_tbl_no;
     actbl = compptr->ac_tbl_no;
-    /* Make sure requested tables are present */
-    /* (In gather mode, tables need not be allocated yet) */
-    if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS ||
-	(cinfo->dc_huff_tbl_ptrs[dctbl] == NULL && !gather_statistics))
-      ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
-    if (actbl < 0 || actbl >= NUM_HUFF_TBLS ||
-	(cinfo->ac_huff_tbl_ptrs[actbl] == NULL && !gather_statistics))
-      ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
     if (gather_statistics) {
 #ifdef ENTROPY_OPT_SUPPORTED
+      /* Check for invalid table indexes */
+      /* (make_c_derived_tbl does this in the other path) */
+      if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS)
+	ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
+      if (actbl < 0 || actbl >= NUM_HUFF_TBLS)
+	ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
       /* Allocate and zero the statistics tables */
       /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
       if (entropy->dc_count_ptrs[dctbl] == NULL)
@@ -151,9 +171,9 @@ start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
     } else {
       /* Compute derived values for Huffman tables */
       /* We may do this more than once for a table, but it's not expensive */
-      jpeg_make_c_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[dctbl],
+      jpeg_make_c_derived_tbl(cinfo, TRUE, dctbl,
 			      & entropy->dc_derived_tbls[dctbl]);
-      jpeg_make_c_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[actbl],
+      jpeg_make_c_derived_tbl(cinfo, FALSE, actbl,
 			      & entropy->ac_derived_tbls[actbl]);
     }
     /* Initialize DC predictions to 0 */
@@ -161,6 +181,7 @@ start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
   }
 
   /* Initialize bit buffer to empty */
+
   entropy->saved.put_buffer = 0;
   entropy->saved.put_bits = 0;
 
@@ -172,19 +193,34 @@ start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics)
 
 /*
  * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
  * Note this is also used by jcphuff.c.
  */
 
 GLOBAL(void)
-jpeg_make_c_derived_tbl (j_compress_ptr cinfo, JHUFF_TBL * htbl,
+jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno,
 			 c_derived_tbl ** pdtbl)
 {
+  JHUFF_TBL *htbl;
   c_derived_tbl *dtbl;
-  int p, i, l, lastp, si;
+  int p, i, l, lastp, si, maxsymbol;
   char huffsize[257];
   unsigned int huffcode[257];
   unsigned int code;
 
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
   /* Allocate a workspace if we haven't already done so. */
   if (*pdtbl == NULL)
     *pdtbl = (c_derived_tbl *)
@@ -193,19 +229,21 @@ jpeg_make_c_derived_tbl (j_compress_ptr cinfo, JHUFF_TBL * htbl,
   dtbl = *pdtbl;
   
   /* Figure C.1: make table of Huffman code length for each symbol */
-  /* Note that this is in code-length order. */
 
   p = 0;
   for (l = 1; l <= 16; l++) {
-    for (i = 1; i <= (int) htbl->bits[l]; i++)
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)	/* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
       huffsize[p++] = (char) l;
   }
   huffsize[p] = 0;
   lastp = p;
   
   /* Figure C.2: generate the codes themselves */
-  /* Note that this is in code-length order. */
-  
+  /* We also validate that the counts represent a legal Huffman code tree. */
+
   code = 0;
   si = huffsize[0];
   p = 0;
@@ -214,6 +252,11 @@ jpeg_make_c_derived_tbl (j_compress_ptr cinfo, JHUFF_TBL * htbl,
       huffcode[p++] = code;
       code++;
     }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((INT32) code) >= (((INT32) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
     code <<= 1;
     si++;
   }
@@ -221,14 +264,34 @@ jpeg_make_c_derived_tbl (j_compress_ptr cinfo, JHUFF_TBL * htbl,
   /* Figure C.3: generate encoding tables */
   /* These are code and size indexed by symbol value */
 
-  /* Set any codeless symbols to have code length 0;
-   * this allows emit_bits to detect any attempt to emit such symbols.
+  /* Set all codeless symbols to have code length 0;
+   * this lets us detect duplicate VAL entries here, and later
+   * allows emit_bits to detect any attempt to emit such symbols.
    */
   MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi));
 
+  /* This is also a convenient place to check for out-of-range
+   * and duplicated VAL entries.  We allow 0..255 for AC symbols
+   * but only 0..15 for DC.  (We could constrain them further
+   * based on data depth and mode, but this seems enough.)
+   */
+  maxsymbol = isDC ? 15 : 255;
+
   for (p = 0; p < lastp; p++) {
-    dtbl->ehufco[htbl->huffval[p]] = huffcode[p];
-    dtbl->ehufsi[htbl->huffval[p]] = huffsize[p];
+    i = htbl->huffval[p];
+    if (i < 0 || i > maxsymbol || dtbl->ehufsi[i])
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    dtbl->ehufco[i] = huffcode[p];
+    dtbl->ehufsi[i] = huffsize[p];
+  }
+
+  if(!jpeg_first_bit_table_init) {
+    for(i = 0; i < 65536; i++) {
+      int bit = 0, val = i;
+      while (val) {val >>= 1;  bit++;}
+      jpeg_first_bit_table[i] = bit;
+    }
+    jpeg_first_bit_table_init = 1;
   }
 }
 
@@ -249,6 +312,8 @@ dump_buffer (working_state * state)
 {
   struct jpeg_destination_mgr * dest = state->cinfo->dest;
 
+  dest->free_in_buffer = state->free_in_buffer;
+
   if (! (*dest->empty_output_buffer) (state->cinfo))
     return FALSE;
   /* After a successful buffer dump, must reset buffer pointers */
@@ -266,139 +331,250 @@ dump_buffer (working_state * state)
  * between calls, so 24 bits are sufficient.
  */
 
-INLINE
-LOCAL(boolean)
-emit_bits (working_state * state, unsigned int code, int size)
-/* Emit some bits; return TRUE if successful, FALSE if must suspend */
-{
-  /* This routine is heavily used, so it's worth coding tightly. */
-  register INT32 put_buffer = (INT32) code;
-  register int put_bits = state->cur.put_bits;
+/***************************************************************/
 
-  /* if size is 0, caller used an invalid Huffman table entry */
-  if (size == 0)
-    ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE);
+#define EMIT_BYTE() {                                           \
+  if (0xFF == (*buffer++ =  (unsigned char)(put_buffer >> (put_bits -= 8))))  \
+    *buffer++ = 0;                                              \
+ }
 
-  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
-  
-  put_bits += size;		/* new number of bits in buffer */
-  
-  put_buffer <<= 24 - put_bits; /* align incoming bits */
+/***************************************************************/
 
-  put_buffer |= state->cur.put_buffer; /* and merge with old buffer contents */
-  
-  while (put_bits >= 8) {
-    int c = (int) ((put_buffer >> 16) & 0xFF);
-    
-    emit_byte(state, c, return FALSE);
-    if (c == 0xFF) {		/* need to stuff a zero byte? */
-      emit_byte(state, 0, return FALSE);
-    }
-    put_buffer <<= 8;
-    put_bits -= 8;
-  }
+#define DUMP_BITS_(code, size) {                                \
+  put_bits += size;                                             \
+  put_buffer = (put_buffer << size) | code;                     \
+  if (put_bits > 7)                                             \
+    while(put_bits > 7)                                         \
+      EMIT_BYTE()                                               \
+ }
 
-  state->cur.put_buffer = put_buffer; /* update state variables */
-  state->cur.put_bits = put_bits;
+/***************************************************************/
 
-  return TRUE;
+#define CHECKBUF15() {                                          \
+  if (put_bits > 15) {                                          \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+  }                                                             \
 }
 
+#define CHECKBUF47() {                                          \
+  if (put_bits > 47) {                                          \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+  }                                                             \
+}
+
+#define CHECKBUF31() {                                          \
+  if (put_bits > 31) {                                          \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+    EMIT_BYTE()                                                 \
+  }                                                             \
+}
+
+/***************************************************************/
+
+#define DUMP_BITS_NOCHECK(code, size) {                         \
+  put_bits += size;                                             \
+  put_buffer = (put_buffer << size) | code;                     \
+ }
+
+#if __WORDSIZE==64
+
+#define DUMP_BITS(code, size) {                                 \
+  CHECKBUF47()                                                  \
+  put_bits += size;                                             \
+  put_buffer = (put_buffer << size) | code;                     \
+ }
+
+#else
+
+#define DUMP_BITS(code, size) {                                 \
+  put_bits += size;                                             \
+  put_buffer = (put_buffer << size) | code;                     \
+  CHECKBUF15()                                                  \
+ }
+
+#endif
+
+/***************************************************************/
+
+#define DUMP_SINGLE_VALUE(ht, codevalue) { \
+  size = ht->ehufsi[codevalue];            \
+  code = ht->ehufco[codevalue];            \
+                                           \
+  DUMP_BITS(code, size)                    \
+ }
+
+/***************************************************************/
+
+#define DUMP_VALUE_SLOW(ht, codevalue, t, nbits) { \
+  size = ht->ehufsi[codevalue];               \
+  code = ht->ehufco[codevalue];               \
+  t &= ~(-1 << nbits);                        \
+  DUMP_BITS_NOCHECK(code, size)               \
+  CHECKBUF15()                                \
+  DUMP_BITS_NOCHECK(t, nbits)                 \
+  CHECKBUF15()                                \
+ }
+
+int _max=0;
+
+#if __WORDSIZE==64
+
+#define DUMP_VALUE(ht, codevalue, t, nbits) { \
+  size = ht->ehufsi[codevalue];               \
+  code = ht->ehufco[codevalue];               \
+  t &= ~(-1 << nbits);                        \
+  CHECKBUF31()                                \
+  DUMP_BITS_NOCHECK(code, size)               \
+  DUMP_BITS_NOCHECK(t, nbits)                 \
+ }
+
+#else
+
+#define DUMP_VALUE(ht, codevalue, t, nbits) { \
+  size = ht->ehufsi[codevalue];               \
+  code = ht->ehufco[codevalue];               \
+  t &= ~(-1 << nbits);                        \
+  DUMP_BITS_NOCHECK(code, size)               \
+  CHECKBUF15()                                \
+  DUMP_BITS_NOCHECK(t, nbits)                 \
+  CHECKBUF15()                                \
+ }
+
+#endif
+
+/***************************************************************/
+
+#define BUFSIZE (DCTSIZE2 * 2)
+
+#define LOAD_BUFFER() {                                           \
+  if (state->free_in_buffer < BUFSIZE) {                          \
+    localbuf = 1;                                                 \
+    buffer = _buffer;                                             \
+  }                                                               \
+  else buffer = state->next_output_byte;                          \
+ }
+
+#define STORE_BUFFER() {                                          \
+  if (localbuf) {                                                 \
+    bytes = buffer - _buffer;                                     \
+    buffer = _buffer;                                             \
+    while (bytes > 0) {                                           \
+      bytestocopy = min(bytes, state->free_in_buffer);            \
+      MEMCOPY(state->next_output_byte, buffer, bytestocopy);      \
+      state->next_output_byte += bytestocopy;                     \
+      buffer += bytestocopy;                                      \
+      state->free_in_buffer -= bytestocopy;                       \
+      if (state->free_in_buffer == 0)                             \
+        if (! dump_buffer(state)) return FALSE;                   \
+      bytes -= bytestocopy;                                       \
+    }                                                             \
+  }                                                               \
+  else {                                                          \
+    state->free_in_buffer -= (buffer - state->next_output_byte);  \
+    state->next_output_byte = buffer;                             \
+  }                                                               \
+ }
+
+/***************************************************************/
 
 LOCAL(boolean)
 flush_bits (working_state * state)
 {
-  if (! emit_bits(state, 0x7F, 7)) /* fill any partial byte with ones */
-    return FALSE;
+  unsigned char _buffer[BUFSIZE], *buffer;
+  long put_buffer;  int put_bits;
+  int bytes, bytestocopy, localbuf = 0;
+
+  put_buffer = state->cur.put_buffer;
+  put_bits = state->cur.put_bits;
+  LOAD_BUFFER()
+
+  DUMP_BITS_(0x7F, 7)
+
   state->cur.put_buffer = 0;	/* and reset bit-buffer to empty */
   state->cur.put_bits = 0;
+  STORE_BUFFER()
+
   return TRUE;
 }
 
-
 /* Encode a single block's worth of coefficients */
 
 LOCAL(boolean)
 encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
 		  c_derived_tbl *dctbl, c_derived_tbl *actbl)
 {
-  register int temp, temp2;
-  register int nbits;
-  register int k, r, i;
-  
+  int temp, temp2;
+  int nbits;
+  int r, sflag, size, code;
+  unsigned char _buffer[BUFSIZE], *buffer;
+  long put_buffer;  int put_bits;
+  int code_0xf0 = actbl->ehufco[0xf0], size_0xf0 = actbl->ehufsi[0xf0];
+  int bytes, bytestocopy, localbuf = 0;
+
+  put_buffer = state->cur.put_buffer;
+  put_bits = state->cur.put_bits;
+  LOAD_BUFFER()
+
   /* Encode the DC coefficient difference per section F.1.2.1 */
   
   temp = temp2 = block[0] - last_dc_val;
 
-  if (temp < 0) {
-    temp = -temp;		/* temp is abs value of input */
-    /* For a negative input, want temp2 = bitwise complement of abs(input) */
-    /* This code assumes we are on a two's complement machine */
-    temp2--;
-  }
-  
-  /* Find the number of bits needed for the magnitude of the coefficient */
-  nbits = 0;
-  while (temp) {
-    nbits++;
-    temp >>= 1;
-  }
-  
-  /* Emit the Huffman-coded symbol for the number of bits */
-  if (! emit_bits(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits]))
-    return FALSE;
-
-  /* Emit that number of bits of the value, if positive, */
-  /* or the complement of its magnitude, if negative. */
-  if (nbits)			/* emit_bits rejects calls with size 0 */
-    if (! emit_bits(state, (unsigned int) temp2, nbits))
-      return FALSE;
+  sflag = temp >> 31;
+  temp -= ((temp + temp) & sflag);
+  temp2 += sflag;
+  nbits = jpeg_first_bit_table[temp];
+  DUMP_VALUE_SLOW(dctbl, nbits, temp2, nbits)
 
   /* Encode the AC coefficients per section F.1.2.2 */
   
   r = 0;			/* r = run length of zeros */
-  
-  for (k = 1; k < DCTSIZE2; k++) {
-    if ((temp = block[jpeg_natural_order[k]]) == 0) {
-      r++;
-    } else {
-      /* if run length > 15, must emit special run-length-16 codes (0xF0) */
-      while (r > 15) {
-	if (! emit_bits(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0]))
-	  return FALSE;
-	r -= 16;
-      }
 
-      temp2 = temp;
-      if (temp < 0) {
-	temp = -temp;		/* temp is abs value of input */
-	/* This code assumes we are on a two's complement machine */
-	temp2--;
-      }
-      
-      /* Find the number of bits needed for the magnitude of the coefficient */
-      nbits = 1;		/* there must be at least one 1 bit */
-      while ((temp >>= 1))
-	nbits++;
-      
-      /* Emit Huffman symbol for run length / number of bits */
-      i = (r << 4) + nbits;
-      if (! emit_bits(state, actbl->ehufco[i], actbl->ehufsi[i]))
-	return FALSE;
+#define innerloop(order) {  \
+  temp2  = *(JCOEF*)((unsigned char*)block + order);  \
+  if(temp2 == 0) r++;  \
+  else {  \
+    temp = (JCOEF)temp2;  \
+    sflag = temp >> 31;  \
+    temp = (temp ^ sflag) - sflag;  \
+    temp2 += sflag;  \
+    nbits = jpeg_first_bit_table[temp];  \
+    for(; r > 15; r -= 16) DUMP_BITS(code_0xf0, size_0xf0)  \
+    sflag = (r << 4) + nbits;  \
+    DUMP_VALUE(actbl, sflag, temp2, nbits)  \
+    r = 0;  \
+  }}
 
-      /* Emit that number of bits of the value, if positive, */
-      /* or the complement of its magnitude, if negative. */
-      if (! emit_bits(state, (unsigned int) temp2, nbits))
-	return FALSE;
-      
-      r = 0;
-    }
-  }
+  innerloop(2*1);   innerloop(2*8);   innerloop(2*16);  innerloop(2*9);
+  innerloop(2*2);   innerloop(2*3);   innerloop(2*10);  innerloop(2*17);
+  innerloop(2*24);  innerloop(2*32);  innerloop(2*25);  innerloop(2*18);
+  innerloop(2*11);  innerloop(2*4);   innerloop(2*5);   innerloop(2*12);
+  innerloop(2*19);  innerloop(2*26);  innerloop(2*33);  innerloop(2*40);
+  innerloop(2*48);  innerloop(2*41);  innerloop(2*34);  innerloop(2*27);
+  innerloop(2*20);  innerloop(2*13);  innerloop(2*6);   innerloop(2*7);
+  innerloop(2*14);  innerloop(2*21);  innerloop(2*28);  innerloop(2*35);
+  innerloop(2*42);  innerloop(2*49);  innerloop(2*56);  innerloop(2*57);
+  innerloop(2*50);  innerloop(2*43);  innerloop(2*36);  innerloop(2*29);
+  innerloop(2*22);  innerloop(2*15);  innerloop(2*23);  innerloop(2*30);
+  innerloop(2*37);  innerloop(2*44);  innerloop(2*51);  innerloop(2*58);
+  innerloop(2*59);  innerloop(2*52);  innerloop(2*45);  innerloop(2*38);
+  innerloop(2*31);  innerloop(2*39);  innerloop(2*46);  innerloop(2*53);
+  innerloop(2*60);  innerloop(2*61);  innerloop(2*54);  innerloop(2*47);
+  innerloop(2*55);  innerloop(2*62);  innerloop(2*63);
 
   /* If the last coef(s) were zero, emit an end-of-block code */
-  if (r > 0)
-    if (! emit_bits(state, actbl->ehufco[0], actbl->ehufsi[0]))
-      return FALSE;
+  if (r > 0) DUMP_SINGLE_VALUE(actbl, 0x0)
+
+  state->cur.put_buffer = put_buffer;
+  state->cur.put_bits = put_bits;
+  STORE_BUFFER()
 
   return TRUE;
 }
@@ -516,19 +692,12 @@ finish_pass_huff (j_compress_ptr cinfo)
 /*
  * Huffman coding optimization.
  *
- * This actually is optimization, in the sense that we find the best possible
- * Huffman table(s) for the given data.  We first scan the supplied data and
- * count the number of uses of each symbol that is to be Huffman-coded.
- * (This process must agree with the code above.)  Then we build an
- * optimal Huffman coding tree for the observed counts.
- *
- * The JPEG standard requires Huffman codes to be no more than 16 bits long.
- * If some symbols have a very small but nonzero probability, the Huffman tree
- * must be adjusted to meet the code length restriction.  We currently use
- * the adjustment method suggested in the JPEG spec.  This method is *not*
- * optimal; it may not choose the best possible limited-length code.  But
- * since the symbols involved are infrequently used, it's not clear that
- * going to extra trouble is worthwhile.
+ * We first scan the supplied data and count the number of uses of each symbol
+ * that is to be Huffman-coded. (This process MUST agree with the code above.)
+ * Then we build a Huffman coding tree for the observed counts.
+ * Symbols which are not needed at all for the particular image are not
+ * assigned any code, which saves space in the DHT marker as well as in
+ * the compressed data.
  */
 
 #ifdef ENTROPY_OPT_SUPPORTED
@@ -537,7 +706,7 @@ finish_pass_huff (j_compress_ptr cinfo)
 /* Process a single block's worth of coefficients */
 
 LOCAL(void)
-htest_one_block (JCOEFPTR block, int last_dc_val,
+htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
 		 long dc_counts[], long ac_counts[])
 {
   register int temp;
@@ -556,6 +725,11 @@ htest_one_block (JCOEFPTR block, int last_dc_val,
     nbits++;
     temp >>= 1;
   }
+  /* Check for out-of-range coefficient values.
+   * Since we're encoding a difference, the range limit is twice as much.
+   */
+  if (nbits > MAX_COEF_BITS+1)
+    ERREXIT(cinfo, JERR_BAD_DCT_COEF);
 
   /* Count the Huffman symbol for the number of bits */
   dc_counts[nbits]++;
@@ -582,6 +756,9 @@ htest_one_block (JCOEFPTR block, int last_dc_val,
       nbits = 1;		/* there must be at least one 1 bit */
       while ((temp >>= 1))
 	nbits++;
+      /* Check for out-of-range coefficient values */
+      if (nbits > MAX_COEF_BITS)
+	ERREXIT(cinfo, JERR_BAD_DCT_COEF);
       
       /* Count Huffman symbol for run length / number of bits */
       ac_counts[(r << 4) + nbits]++;
@@ -623,7 +800,7 @@ encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
   for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
     ci = cinfo->MCU_membership[blkn];
     compptr = cinfo->cur_comp_info[ci];
-    htest_one_block(MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
+    htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci],
 		    entropy->dc_count_ptrs[compptr->dc_tbl_no],
 		    entropy->ac_count_ptrs[compptr->ac_tbl_no]);
     entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0];
@@ -634,8 +811,31 @@ encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
 
 /*
- * Generate the optimal coding for the given counts, fill htbl.
+ * Generate the best Huffman code table for the given counts, fill htbl.
  * Note this is also used by jcphuff.c.
+ *
+ * The JPEG standard requires that no symbol be assigned a codeword of all
+ * one bits (so that padding bits added at the end of a compressed segment
+ * can't look like a valid code).  Because of the canonical ordering of
+ * codewords, this just means that there must be an unused slot in the
+ * longest codeword length category.  Section K.2 of the JPEG spec suggests
+ * reserving such a slot by pretending that symbol 256 is a valid symbol
+ * with count 1.  In theory that's not optimal; giving it count zero but
+ * including it in the symbol set anyway should give a better Huffman code.
+ * But the theoretically better code actually seems to come out worse in
+ * practice, because it produces more all-ones bytes (which incur stuffed
+ * zero bytes in the final file).  In any case the difference is tiny.
+ *
+ * The JPEG standard requires Huffman codes to be no more than 16 bits long.
+ * If some symbols have a very small but nonzero probability, the Huffman tree
+ * must be adjusted to meet the code length restriction.  We currently use
+ * the adjustment method suggested in JPEG section K.2.  This method is *not*
+ * optimal; it may not choose the best possible limited-length code.  But
+ * typically only very-low-frequency symbols will be given less-than-optimal
+ * lengths, so the code is almost optimal.  Experimental comparisons against
+ * an optimal limited-length-code algorithm indicate that the difference is
+ * microscopic --- usually less than a hundredth of a percent of total size.
+ * So the extra complexity of an optimal algorithm doesn't seem worthwhile.
  */
 
 GLOBAL(void)
@@ -656,10 +856,10 @@ jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[])
   for (i = 0; i < 257; i++)
     others[i] = -1;		/* init links to empty */
   
-  freq[256] = 1;		/* make sure there is a nonzero count */
+  freq[256] = 1;		/* make sure 256 has a nonzero count */
   /* Including the pseudo-symbol 256 in the Huffman procedure guarantees
    * that no real symbol is given code-value of all ones, because 256
-   * will be placed in the largest codeword category.
+   * will be placed last in the largest codeword category.
    */
 
   /* Huffman's basic algorithm to assign optimal code lengths to symbols */

jchuff.h

@@ -1,7 +1,7 @@
 /*
  * jchuff.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -10,6 +10,18 @@
  * progressive encoder (jcphuff.c).  No other modules need to see these.
  */
 
+/* The legal range of a DCT coefficient is
+ *  -1024 .. +1023  for 8-bit data;
+ * -16384 .. +16383 for 12-bit data.
+ * Hence the magnitude should always fit in 10 or 14 bits respectively.
+ */
+
+#if BITS_IN_JSAMPLE == 8
+#define MAX_COEF_BITS 10
+#else
+#define MAX_COEF_BITS 14
+#endif
+
 /* Derived data constructed for each Huffman table */
 
 typedef struct {
@@ -27,7 +39,8 @@ typedef struct {
 
 /* Expand a Huffman table definition into the derived format */
 EXTERN(void) jpeg_make_c_derived_tbl
-	JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, c_derived_tbl ** pdtbl));
+	JPP((j_compress_ptr cinfo, boolean isDC, int tblno,
+	     c_derived_tbl ** pdtbl));
 
 /* Generate an optimal table definition given the specified counts */
 EXTERN(void) jpeg_gen_optimal_table

jcinit.c

@@ -1,7 +1,7 @@
 /*
  * jcinit.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -56,7 +56,7 @@ jinit_compress_master (j_compress_ptr cinfo)
 
   /* Need a full-image coefficient buffer in any multi-pass mode. */
   jinit_c_coef_controller(cinfo,
-			  (cinfo->num_scans > 1 || cinfo->optimize_coding));
+		(boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding));
   jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */);
 
   jinit_marker_writer(cinfo);

jcmarker.c

@@ -1,7 +1,7 @@
 /*
  * jcmarker.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -81,6 +81,17 @@ typedef enum {			/* JPEG marker codes */
 } JPEG_MARKER;
 
 
+/* Private state */
+
+typedef struct {
+  struct jpeg_marker_writer pub; /* public fields */
+
+  unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */
+} my_marker_writer;
+
+typedef my_marker_writer * my_marker_ptr;
+
+
 /*
  * Basic output routines.
  *
@@ -158,8 +169,8 @@ emit_dqt (j_compress_ptr cinfo, int index)
       /* The table entries must be emitted in zigzag order. */
       unsigned int qval = qtbl->quantval[jpeg_natural_order[i]];
       if (prec)
-	emit_byte(cinfo, qval >> 8);
-      emit_byte(cinfo, qval & 0xFF);
+	emit_byte(cinfo, (int) (qval >> 8));
+      emit_byte(cinfo, (int) (qval & 0xFF));
     }
 
     qtbl->sent_table = TRUE;
@@ -342,7 +353,7 @@ emit_jfif_app0 (j_compress_ptr cinfo)
    * Length of APP0 block	(2 bytes)
    * Block ID			(4 bytes - ASCII "JFIF")
    * Zero byte			(1 byte to terminate the ID string)
-   * Version Major, Minor	(2 bytes - 0x01, 0x01)
+   * Version Major, Minor	(2 bytes - major first)
    * Units			(1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm)
    * Xdpu			(2 bytes - dots per unit horizontal)
    * Ydpu			(2 bytes - dots per unit vertical)
@@ -359,11 +370,8 @@ emit_jfif_app0 (j_compress_ptr cinfo)
   emit_byte(cinfo, 0x49);
   emit_byte(cinfo, 0x46);
   emit_byte(cinfo, 0);
-  /* We currently emit version code 1.01 since we use no 1.02 features.
-   * This may avoid complaints from some older decoders.
-   */
-  emit_byte(cinfo, 1);		/* Major version */
-  emit_byte(cinfo, 1);		/* Minor version */
+  emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */
+  emit_byte(cinfo, cinfo->JFIF_minor_version);
   emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */
   emit_2bytes(cinfo, (int) cinfo->X_density);
   emit_2bytes(cinfo, (int) cinfo->Y_density);
@@ -419,28 +427,30 @@ emit_adobe_app14 (j_compress_ptr cinfo)
 
 
 /*
- * This routine is exported for possible use by applications.
- * The intended use is to emit COM or APPn markers after calling
- * jpeg_start_compress() and before the first jpeg_write_scanlines() call
- * (hence, after write_file_header but before write_frame_header).
+ * These routines allow writing an arbitrary marker with parameters.
+ * The only intended use is to emit COM or APPn markers after calling
+ * write_file_header and before calling write_frame_header.
  * Other uses are not guaranteed to produce desirable results.
+ * Counting the parameter bytes properly is the caller's responsibility.
  */
 
 METHODDEF(void)
-write_any_marker (j_compress_ptr cinfo, int marker,
-		  const JOCTET *dataptr, unsigned int datalen)
-/* Emit an arbitrary marker with parameters */
+write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen)
+/* Emit an arbitrary marker header */
 {
-  if (datalen <= (unsigned int) 65533) { /* safety check */
-    emit_marker(cinfo, (JPEG_MARKER) marker);
-  
-    emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */
+  if (datalen > (unsigned int) 65533)		/* safety check */
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
 
-    while (datalen--) {
-      emit_byte(cinfo, *dataptr);
-      dataptr++;
-    }
-  }
+  emit_marker(cinfo, (JPEG_MARKER) marker);
+
+  emit_2bytes(cinfo, (int) (datalen + 2));	/* total length */
+}
+
+METHODDEF(void)
+write_marker_byte (j_compress_ptr cinfo, int val)
+/* Emit one byte of marker parameters following write_marker_header */
+{
+  emit_byte(cinfo, val);
 }
 
 
@@ -458,8 +468,13 @@ write_any_marker (j_compress_ptr cinfo, int marker,
 METHODDEF(void)
 write_file_header (j_compress_ptr cinfo)
 {
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
   emit_marker(cinfo, M_SOI);	/* first the SOI */
 
+  /* SOI is defined to reset restart interval to 0 */
+  marker->last_restart_interval = 0;
+
   if (cinfo->write_JFIF_header)	/* next an optional JFIF APP0 */
     emit_jfif_app0(cinfo);
   if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */
@@ -535,6 +550,7 @@ write_frame_header (j_compress_ptr cinfo)
 METHODDEF(void)
 write_scan_header (j_compress_ptr cinfo)
 {
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
   int i;
   jpeg_component_info *compptr;
 
@@ -567,11 +583,12 @@ write_scan_header (j_compress_ptr cinfo)
   }
 
   /* Emit DRI if required --- note that DRI value could change for each scan.
-   * If it doesn't, a tiny amount of space is wasted in multiple-scan files.
-   * We assume DRI will never be nonzero for one scan and zero for a later one.
+   * We avoid wasting space with unnecessary DRIs, however.
    */
-  if (cinfo->restart_interval)
+  if (cinfo->restart_interval != marker->last_restart_interval) {
     emit_dri(cinfo);
+    marker->last_restart_interval = cinfo->restart_interval;
+  }
 
   emit_sos(cinfo);
 }
@@ -627,15 +644,21 @@ write_tables_only (j_compress_ptr cinfo)
 GLOBAL(void)
 jinit_marker_writer (j_compress_ptr cinfo)
 {
+  my_marker_ptr marker;
+
   /* Create the subobject */
-  cinfo->marker = (struct jpeg_marker_writer *)
+  marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(struct jpeg_marker_writer));
+				SIZEOF(my_marker_writer));
+  cinfo->marker = (struct jpeg_marker_writer *) marker;
   /* Initialize method pointers */
-  cinfo->marker->write_any_marker = write_any_marker;
-  cinfo->marker->write_file_header = write_file_header;
-  cinfo->marker->write_frame_header = write_frame_header;
-  cinfo->marker->write_scan_header = write_scan_header;
-  cinfo->marker->write_file_trailer = write_file_trailer;
-  cinfo->marker->write_tables_only = write_tables_only;
+  marker->pub.write_file_header = write_file_header;
+  marker->pub.write_frame_header = write_frame_header;
+  marker->pub.write_scan_header = write_scan_header;
+  marker->pub.write_file_trailer = write_file_trailer;
+  marker->pub.write_tables_only = write_tables_only;
+  marker->pub.write_marker_header = write_marker_header;
+  marker->pub.write_marker_byte = write_marker_byte;
+  /* Initialize private state */
+  marker->last_restart_interval = 0;
 }

jcmaster.c

@@ -1,7 +1,7 @@
 /*
  * jcmaster.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -185,8 +185,20 @@ validate_script (j_compress_ptr cinfo)
     Al = scanptr->Al;
     if (cinfo->progressive_mode) {
 #ifdef C_PROGRESSIVE_SUPPORTED
+      /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that
+       * seems wrong: the upper bound ought to depend on data precision.
+       * Perhaps they really meant 0..N+1 for N-bit precision.
+       * Here we allow 0..10 for 8-bit data; Al larger than 10 results in
+       * out-of-range reconstructed DC values during the first DC scan,
+       * which might cause problems for some decoders.
+       */
+#if BITS_IN_JSAMPLE == 8
+#define MAX_AH_AL 10
+#else
+#define MAX_AH_AL 13
+#endif
       if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
-	  Ah < 0 || Ah > 13 || Al < 0 || Al > 13)
+	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
 	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
       if (Ss == 0) {
 	if (Se != 0)		/* DC and AC together not OK */

jcomapi.c

@@ -1,7 +1,7 @@
 /*
  * jcomapi.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -30,6 +30,10 @@ jpeg_abort (j_common_ptr cinfo)
 {
   int pool;
 
+  /* Do nothing if called on a not-initialized or destroyed JPEG object. */
+  if (cinfo->mem == NULL)
+    return;
+
   /* Releasing pools in reverse order might help avoid fragmentation
    * with some (brain-damaged) malloc libraries.
    */
@@ -38,7 +42,15 @@ jpeg_abort (j_common_ptr cinfo)
   }
 
   /* Reset overall state for possible reuse of object */
-  cinfo->global_state = (cinfo->is_decompressor ? DSTATE_START : CSTATE_START);
+  if (cinfo->is_decompressor) {
+    cinfo->global_state = DSTATE_START;
+    /* Try to keep application from accessing now-deleted marker list.
+     * A bit kludgy to do it here, but this is the most central place.
+     */
+    ((j_decompress_ptr) cinfo)->marker_list = NULL;
+  } else {
+    cinfo->global_state = CSTATE_START;
+  }
 }
 
 

jconfig.bcc

@@ -1,48 +0,0 @@
-/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#ifdef __MSDOS__
-#define NEED_FAR_POINTERS	/* for small or medium memory model */
-#endif
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN	/* this assumes you have -w-stu in CFLAGS */
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#ifdef __MSDOS__
-#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
-#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
-#define USE_FMEM		/* Borland has _fmemcpy() and _fmemset() */
-#endif
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define USE_SETMODE		/* Borland has setmode() */
-#ifdef __MSDOS__
-#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
-#endif
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.cfg

@@ -1,44 +0,0 @@
-/* jconfig.cfg --- source file edited by configure script */
-/* see jconfig.doc for explanations */
-
-#undef HAVE_PROTOTYPES
-#undef HAVE_UNSIGNED_CHAR
-#undef HAVE_UNSIGNED_SHORT
-#undef void
-#undef const
-#undef CHAR_IS_UNSIGNED
-#undef HAVE_STDDEF_H
-#undef HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-/* Define this if you get warnings about undefined structures. */
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-#undef INLINE
-/* These are for configuring the JPEG memory manager. */
-#undef DEFAULT_MAX_MEM
-#undef NO_MKTEMP
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-
-/* Define this if you want percent-done progress reports from cjpeg/djpeg. */
-#undef PROGRESS_REPORT
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.dj

@@ -1,38 +0,0 @@
-/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS	/* DJGPP uses flat 32-bit addressing */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE	/* optional */
-#define USE_SETMODE		/* Needed to make one-file style work in DJGPP */
-#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.h.in

@@ -0,0 +1,49 @@
+/* Define if your compiler supports prototypes */
+#undef HAVE_PROTOTYPES
+
+/* Define to 1 if you have the <stddef.h> header file. */
+#undef HAVE_STDDEF_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if the system has the type `unsigned char'. */
+#undef HAVE_UNSIGNED_CHAR
+
+/* Define to 1 if the system has the type `unsigned short'. */
+#undef HAVE_UNSIGNED_SHORT
+
+/* Define if you want use complete types */
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define if you have BSD-like bzero and bcopy */
+#undef NEED_BSD_STRINGS
+
+/* Define if you need short function names */
+#undef NEED_SHORT_EXTERNAL_NAMES
+
+/* Define if you have sys/types.h */
+#undef NEED_SYS_TYPES_H
+
+/* Define if shift is unsigned */
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+/* Use accelerated SIMD routines. */
+#undef WITH_SIMD
+
+/* Define to 1 if type `char' is unsigned and you are not using gcc.  */
+#ifndef __CHAR_UNSIGNED__
+# undef __CHAR_UNSIGNED__
+#endif
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to `__inline__' or `__inline' if that's what the C compiler
+   calls it, or to nothing if 'inline' is not supported under any name.  */
+#ifndef __cplusplus
+#undef inline
+#endif
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t

jconfig.manx

@@ -1,43 +0,0 @@
-/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
-
-#define SHORTxSHORT_32		/* produces better DCT code with Aztec C */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#define signal_catcher _abort	/* hack for Aztec C naming requirements */
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.mc6

@@ -1,52 +0,0 @@
-/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#define NEED_FAR_POINTERS	/* for small or medium memory model */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
-
-#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
-
-#define USE_FMEM		/* Microsoft has _fmemcpy() and _fmemset() */
-
-#define NEED_FHEAPMIN		/* far heap management routines are broken */
-
-#define SHORTxLCONST_32		/* enable compiler-specific DCT optimization */
-/* Note: the above define is known to improve the code with Microsoft C 6.00A.
- * I do not know whether it is good for later compiler versions.
- * Please report any info on this point to jpeg-info@uunet.uu.net.
- */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define USE_SETMODE		/* Microsoft has setmode() */
-#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.sas

@@ -1,43 +0,0 @@
-/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
-
-#define NO_MKTEMP		/* SAS C doesn't have mktemp() */
-
-#define SHORTxSHORT_32		/* produces better DCT code with SAS C */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE
-#define NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.st

@@ -1,42 +0,0 @@
-/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#define INCOMPLETE_TYPES_BROKEN	/* suppress undefined-structure warnings */
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#define ALIGN_TYPE  long	/* apparently double is a weird size? */
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE	/* optional -- undef if you like Unix style */
-/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define
- * USE_SETMODE.  Some Atari compilers require it, some do not.
- */
-#define NEED_SIGNAL_CATCHER	/* needed if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.vms

@@ -1,37 +0,0 @@
-/* jconfig.vms --- jconfig.h for use on Digital VMS. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#undef CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#define TWO_FILE_COMMANDLINE	/* Needed on VMS */
-#undef NEED_SIGNAL_CATCHER
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

jconfig.wat

@@ -1,38 +0,0 @@
-/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */
-/* see jconfig.doc for explanations */
-
-#define HAVE_PROTOTYPES
-#define HAVE_UNSIGNED_CHAR
-#define HAVE_UNSIGNED_SHORT
-/* #define void char */
-/* #define const */
-#define CHAR_IS_UNSIGNED
-#define HAVE_STDDEF_H
-#define HAVE_STDLIB_H
-#undef NEED_BSD_STRINGS
-#undef NEED_SYS_TYPES_H
-#undef NEED_FAR_POINTERS	/* Watcom uses flat 32-bit addressing */
-#undef NEED_SHORT_EXTERNAL_NAMES
-#undef INCOMPLETE_TYPES_BROKEN
-
-#ifdef JPEG_INTERNALS
-
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-#endif /* JPEG_INTERNALS */
-
-#ifdef JPEG_CJPEG_DJPEG
-
-#define BMP_SUPPORTED		/* BMP image file format */
-#define GIF_SUPPORTED		/* GIF image file format */
-#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
-#undef RLE_SUPPORTED		/* Utah RLE image file format */
-#define TARGA_SUPPORTED		/* Targa image file format */
-
-#undef TWO_FILE_COMMANDLINE	/* optional */
-#define USE_SETMODE		/* Needed to make one-file style work in Watcom */
-#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
-#undef DONT_USE_B_MODE
-#undef PROGRESS_REPORT		/* optional */
-
-#endif /* JPEG_CJPEG_DJPEG */

jcparam.c

@@ -1,7 +1,8 @@
 /*
  * jcparam.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Copyright (C) 2009, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -29,7 +30,7 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
  * are limited to 1..255 for JPEG baseline compatibility.
  */
 {
-  JQUANT_TBL ** qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
+  JQUANT_TBL ** qtblptr;
   int i;
   long temp;
 
@@ -37,6 +38,11 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
   if (cinfo->global_state != CSTATE_START)
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
+  if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS)
+    ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl);
+
+  qtblptr = & cinfo->quant_tbl_ptrs[which_tbl];
+
   if (*qtblptr == NULL)
     *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo);
 
@@ -148,11 +154,25 @@ add_huff_table (j_compress_ptr cinfo,
 		JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val)
 /* Define a Huffman table */
 {
+  int nsymbols, len;
+
   if (*htblptr == NULL)
     *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-  
+
+  /* Copy the number-of-symbols-of-each-code-length counts */
   MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits));
-  MEMCOPY((*htblptr)->huffval, val, SIZEOF((*htblptr)->huffval));
+
+  /* Validate the counts.  We do this here mainly so we can copy the right
+   * number of symbols from the val[] array, without risking marching off
+   * the end of memory.  jchuff.c will do a more thorough test later.
+   */
+  nsymbols = 0;
+  for (len = 1; len <= 16; len++)
+    nsymbols += bits[len];
+  if (nsymbols < 1 || nsymbols > 256)
+    ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+
+  MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8));
 
   /* Initialize sent_table FALSE so table will be written to JPEG file. */
   (*htblptr)->sent_table = FALSE;
@@ -313,7 +333,15 @@ jpeg_set_defaults (j_compress_ptr cinfo)
 
   /* Fill in default JFIF marker parameters.  Note that whether the marker
    * will actually be written is determined by jpeg_set_colorspace.
+   *
+   * By default, the library emits JFIF version code 1.01.
+   * An application that wants to emit JFIF 1.02 extension markers should set
+   * JFIF_minor_version to 2.  We could probably get away with just defaulting
+   * to 1.02, but there may still be some decoders in use that will complain
+   * about that; saying 1.01 should minimize compatibility problems.
    */
+  cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
+  cinfo->JFIF_minor_version = 1;
   cinfo->density_unit = 0;	/* Pixel size is unknown by default */
   cinfo->X_density = 1;		/* Pixel aspect ratio is square by default */
   cinfo->Y_density = 1;
@@ -336,6 +364,12 @@ jpeg_default_colorspace (j_compress_ptr cinfo)
     jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
     break;
   case JCS_RGB:
+  case JCS_EXT_RGB:
+  case JCS_EXT_RGBX:
+  case JCS_EXT_BGR:
+  case JCS_EXT_BGRX:
+  case JCS_EXT_XBGR:
+  case JCS_EXT_XRGB:
     jpeg_set_colorspace(cinfo, JCS_YCbCr);
     break;
   case JCS_YCbCr:
@@ -529,11 +563,20 @@ jpeg_simple_progression (j_compress_ptr cinfo)
       nscans = 2 + 4 * ncomps;	/* 2 DC scans; 4 AC scans per component */
   }
 
-  /* Allocate space for script. */
-  /* We use permanent pool just in case application re-uses script. */
-  scanptr = (jpeg_scan_info *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
-				nscans * SIZEOF(jpeg_scan_info));
+  /* Allocate space for script.
+   * We need to put it in the permanent pool in case the application performs
+   * multiple compressions without changing the settings.  To avoid a memory
+   * leak if jpeg_simple_progression is called repeatedly for the same JPEG
+   * object, we try to re-use previously allocated space, and we allocate
+   * enough space to handle YCbCr even if initially asked for grayscale.
+   */
+  if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
+    cinfo->script_space_size = MAX(nscans, 10);
+    cinfo->script_space = (jpeg_scan_info *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+			cinfo->script_space_size * SIZEOF(jpeg_scan_info));
+  }
+  scanptr = cinfo->script_space;
   cinfo->scan_info = scanptr;
   cinfo->num_scans = nscans;
 

jcphuff.c

@@ -1,7 +1,7 @@
 /*
  * jcphuff.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -147,22 +147,19 @@ start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics)
     compptr = cinfo->cur_comp_info[ci];
     /* Initialize DC predictions to 0 */
     entropy->last_dc_val[ci] = 0;
-    /* Make sure requested tables are present */
-    /* (In gather mode, tables need not be allocated yet) */
+    /* Get table index */
     if (is_DC_band) {
       if (cinfo->Ah != 0)	/* DC refinement needs no table */
 	continue;
       tbl = compptr->dc_tbl_no;
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-	  (cinfo->dc_huff_tbl_ptrs[tbl] == NULL && !gather_statistics))
-	ERREXIT1(cinfo,JERR_NO_HUFF_TABLE, tbl);
     } else {
       entropy->ac_tbl_no = tbl = compptr->ac_tbl_no;
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-          (cinfo->ac_huff_tbl_ptrs[tbl] == NULL && !gather_statistics))
-        ERREXIT1(cinfo,JERR_NO_HUFF_TABLE, tbl);
     }
     if (gather_statistics) {
+      /* Check for invalid table index */
+      /* (make_c_derived_tbl does this in the other path) */
+      if (tbl < 0 || tbl >= NUM_HUFF_TBLS)
+        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
       /* Allocate and zero the statistics tables */
       /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
       if (entropy->count_ptrs[tbl] == NULL)
@@ -171,14 +168,10 @@ start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics)
 				      257 * SIZEOF(long));
       MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long));
     } else {
-      /* Compute derived values for Huffman tables */
+      /* Compute derived values for Huffman table */
       /* We may do this more than once for a table, but it's not expensive */
-      if (is_DC_band)
-        jpeg_make_c_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[tbl],
-				& entropy->derived_tbls[tbl]);
-      else
-        jpeg_make_c_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[tbl],
-				& entropy->derived_tbls[tbl]);
+      jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl,
+			      & entropy->derived_tbls[tbl]);
     }
   }
 
@@ -230,7 +223,6 @@ dump_buffer (phuff_entropy_ptr entropy)
  * between calls, so 24 bits are sufficient.
  */
 
-INLINE
 LOCAL(void)
 emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size)
 /* Emit some bits, unless we are in gather mode */
@@ -283,7 +275,6 @@ flush_bits (phuff_entropy_ptr entropy)
  * Emit (or just count) a Huffman symbol.
  */
 
-INLINE
 LOCAL(void)
 emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol)
 {
@@ -329,6 +320,9 @@ emit_eobrun (phuff_entropy_ptr entropy)
     nbits = 0;
     while ((temp >>= 1))
       nbits++;
+    /* safety check: shouldn't happen given limited correction-bit buffer */
+    if (nbits > 14)
+      ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
 
     emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4);
     if (nbits)
@@ -427,6 +421,11 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
       nbits++;
       temp >>= 1;
     }
+    /* Check for out-of-range coefficient values.
+     * Since we're encoding a difference, the range limit is twice as much.
+     */
+    if (nbits > MAX_COEF_BITS+1)
+      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
     
     /* Count/emit the Huffman-coded symbol for the number of bits */
     emit_symbol(entropy, compptr->dc_tbl_no, nbits);
@@ -523,6 +522,9 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
     nbits = 1;			/* there must be at least one 1 bit */
     while ((temp >>= 1))
       nbits++;
+    /* Check for out-of-range coefficient values */
+    if (nbits > MAX_COEF_BITS)
+      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
 
     /* Count/emit Huffman symbol for run length / number of bits */
     emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits);

jcsample.c

@@ -2,6 +2,7 @@
  * jcsample.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -48,6 +49,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jsimd.h"
 
 
 /* Pointer to routine to downsample a single component */
@@ -494,7 +496,10 @@ jinit_downsampler (j_compress_ptr cinfo)
     } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
 	       compptr->v_samp_factor == cinfo->max_v_samp_factor) {
       smoothok = FALSE;
-      downsample->methods[ci] = h2v1_downsample;
+      if (jsimd_can_h2v1_downsample())
+        downsample->methods[ci] = jsimd_h2v1_downsample;
+      else
+        downsample->methods[ci] = h2v1_downsample;
     } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
 	       compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) {
 #ifdef INPUT_SMOOTHING_SUPPORTED
@@ -503,7 +508,10 @@ jinit_downsampler (j_compress_ptr cinfo)
 	downsample->pub.need_context_rows = TRUE;
       } else
 #endif
-	downsample->methods[ci] = h2v2_downsample;
+	if (jsimd_can_h2v2_downsample())
+	  downsample->methods[ci] = jsimd_h2v2_downsample;
+	else
+	  downsample->methods[ci] = h2v2_downsample;
     } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 &&
 	       (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) {
       smoothok = FALSE;

jctrans.c

@@ -1,7 +1,7 @@
 /*
  * jctrans.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -129,6 +129,23 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
      * instead we rely on jpeg_set_colorspace to have made a suitable choice.
      */
   }
+  /* Also copy JFIF version and resolution information, if available.
+   * Strictly speaking this isn't "critical" info, but it's nearly
+   * always appropriate to copy it if available.  In particular,
+   * if the application chooses to copy JFIF 1.02 extension markers from
+   * the source file, we need to copy the version to make sure we don't
+   * emit a file that has 1.02 extensions but a claimed version of 1.01.
+   * We will *not*, however, copy version info from mislabeled "2.01" files.
+   */
+  if (srcinfo->saw_JFIF_marker) {
+    if (srcinfo->JFIF_major_version == 1) {
+      dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
+      dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
+    }
+    dstinfo->density_unit = srcinfo->density_unit;
+    dstinfo->X_density = srcinfo->X_density;
+    dstinfo->Y_density = srcinfo->Y_density;
+  }
 }
 
 
@@ -170,7 +187,7 @@ transencode_master_selection (j_compress_ptr cinfo,
   /* We can now tell the memory manager to allocate virtual arrays. */
   (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo);
 
-  /* Write the datastream header (SOI) immediately.
+  /* Write the datastream header (SOI, JFIF) immediately.
    * Frame and scan headers are postponed till later.
    * This lets application insert special markers after the SOI.
    */

jdapimin.c

@@ -1,7 +1,7 @@
 /*
  * jdapimin.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,13 +39,18 @@ jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
     ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, 
 	     (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize);
 
-  /* For debugging purposes, zero the whole master structure.
-   * But error manager pointer is already there, so save and restore it.
+  /* For debugging purposes, we zero the whole master structure.
+   * But the application has already set the err pointer, and may have set
+   * client_data, so we have to save and restore those fields.
+   * Note: if application hasn't set client_data, tools like Purify may
+   * complain here.
    */
   {
     struct jpeg_error_mgr * err = cinfo->err;
+    void * client_data = cinfo->client_data; /* ignore Purify complaint here */
     MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct));
     cinfo->err = err;
+    cinfo->client_data = client_data;
   }
   cinfo->is_decompressor = TRUE;
 
@@ -67,6 +72,7 @@ jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize)
   /* Initialize marker processor so application can override methods
    * for COM, APPn markers before calling jpeg_read_header.
    */
+  cinfo->marker_list = NULL;
   jinit_marker_reader(cinfo);
 
   /* And initialize the overall input controller. */
@@ -100,23 +106,6 @@ jpeg_abort_decompress (j_decompress_ptr cinfo)
 }
 
 
-/*
- * Install a special processing method for COM or APPn markers.
- */
-
-GLOBAL(void)
-jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
-			   jpeg_marker_parser_method routine)
-{
-  if (marker_code == JPEG_COM)
-    cinfo->marker->process_COM = routine;
-  else if (marker_code >= JPEG_APP0 && marker_code <= JPEG_APP0+15)
-    cinfo->marker->process_APPn[marker_code-JPEG_APP0] = routine;
-  else
-    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
-}
-
-
 /*
  * Set default decompression parameters.
  */

jdcoefct.c

@@ -1,7 +1,7 @@
 /*
  * jdcoefct.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -47,6 +47,9 @@ typedef struct {
    */
   JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU];
 
+  /* Temporary workspace for one MCU */
+  JCOEF * workspace;
+
 #ifdef D_MULTISCAN_FILES_SUPPORTED
   /* In multi-pass modes, we need a virtual block array for each component. */
   jvirt_barray_ptr whole_image[MAX_COMPONENTS];
@@ -139,8 +142,8 @@ start_output_pass (j_decompress_ptr cinfo)
  * Input and output must run in lockstep since we have only a one-MCU buffer.
  * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED.
  *
- * NB: output_buf contains a plane for each component in image.
- * For single pass, this is the same as the components in the scan.
+ * NB: output_buf contains a plane for each component in image,
+ * which we index according to the component's SOF position.
  */
 
 METHODDEF(int)
@@ -186,7 +189,8 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index];
 	useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
 						    : compptr->last_col_width;
-	output_ptr = output_buf[ci] + yoffset * compptr->DCT_scaled_size;
+	output_ptr = output_buf[compptr->component_index] +
+	  yoffset * compptr->DCT_scaled_size;
 	start_col = MCU_col_num * compptr->MCU_sample_width;
 	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
 	  if (cinfo->input_iMCU_row < last_iMCU_row ||
@@ -470,13 +474,16 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
   jpeg_component_info *compptr;
   inverse_DCT_method_ptr inverse_DCT;
   boolean first_row, last_row;
-  JBLOCK workspace;
+  JCOEF * workspace;
   int *coef_bits;
   JQUANT_TBL *quanttbl;
   INT32 Q00,Q01,Q02,Q10,Q11,Q20, num;
   int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9;
   int Al, pred;
 
+  /* Keep a local variable to avoid looking it up more than once */
+  workspace = coef->workspace;
+
   /* Force some input to be done if we are getting ahead of the input. */
   while (cinfo->input_scan_number <= cinfo->output_scan_number &&
 	 ! cinfo->inputctl->eoi_reached) {
@@ -732,4 +739,9 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
     coef->pub.decompress_data = decompress_onepass;
     coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
   }
+
+  /* Allocate the workspace buffer */
+  coef->workspace = (JCOEF *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+                                SIZEOF(JCOEF) * DCTSIZE2);
 }

jdcolor.c

@@ -1,7 +1,9 @@
 /*
  * jdcolor.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2009, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -11,6 +13,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jsimd.h"
 
 
 /* Private subobject */
@@ -146,12 +149,12 @@ ycc_rgb_convert (j_decompress_ptr cinfo,
       cb = GETJSAMPLE(inptr1[col]);
       cr = GETJSAMPLE(inptr2[col]);
       /* Range-limiting is essential due to noise introduced by DCT losses. */
-      outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
-      outptr[RGB_GREEN] = range_limit[y +
+      outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + Crrtab[cr]];
+      outptr[rgb_green[cinfo->out_color_space]] = range_limit[y +
 			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
 						 SCALEBITS))];
-      outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
-      outptr += RGB_PIXELSIZE;
+      outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + Cbbtab[cb]];
+      outptr += rgb_pixelsize[cinfo->out_color_space];
     }
   }
 }
@@ -207,6 +210,38 @@ grayscale_convert (j_decompress_ptr cinfo,
 }
 
 
+/*
+ * Convert grayscale to RGB: just duplicate the graylevel three times.
+ * This is provided to support applications that don't want to cope
+ * with grayscale as a separate case.
+ */
+
+METHODDEF(void)
+gray_rgb_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW inptr, outptr;
+  JSAMPLE *maxinptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+  int rindex = rgb_red[cinfo->out_color_space];
+  int gindex = rgb_green[cinfo->out_color_space];
+  int bindex = rgb_blue[cinfo->out_color_space];
+  int rgbstride = rgb_pixelsize[cinfo->out_color_space];
+
+  while (--num_rows >= 0) {
+    inptr = input_buf[0][input_row++];
+    maxinptr = &inptr[num_cols];
+    outptr = *output_buf++;
+    for (; inptr < maxinptr; inptr++, outptr += rgbstride) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr[rindex] = outptr[gindex] = outptr[bindex] = *inptr;
+    }
+  }
+}
+
+
 /*
  * Adobe-style YCCK->CMYK conversion.
  * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same
@@ -329,11 +364,24 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
     break;
 
   case JCS_RGB:
-    cinfo->out_color_components = RGB_PIXELSIZE;
+  case JCS_EXT_RGB:
+  case JCS_EXT_RGBX:
+  case JCS_EXT_BGR:
+  case JCS_EXT_BGRX:
+  case JCS_EXT_XBGR:
+  case JCS_EXT_XRGB:
+    cinfo->out_color_components = rgb_pixelsize[cinfo->out_color_space];
     if (cinfo->jpeg_color_space == JCS_YCbCr) {
-      cconvert->pub.color_convert = ycc_rgb_convert;
-      build_ycc_rgb_table(cinfo);
-    } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) {
+      if (jsimd_can_ycc_rgb())
+        cconvert->pub.color_convert = jsimd_ycc_rgb_convert;
+      else {
+        cconvert->pub.color_convert = ycc_rgb_convert;
+        build_ycc_rgb_table(cinfo);
+      }
+    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
+      cconvert->pub.color_convert = gray_rgb_convert;
+    } else if (cinfo->jpeg_color_space == cinfo->out_color_space &&
+      rgb_pixelsize[cinfo->out_color_space] == 3) {
       cconvert->pub.color_convert = null_convert;
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);

jdct.h

@@ -23,18 +23,26 @@
  * have a range of +-8K for 8-bit data, +-128K for 12-bit data.  This
  * convention improves accuracy in integer implementations and saves some
  * work in floating-point ones.
- * Quantization of the output coefficients is done by jcdctmgr.c.
+ * Quantization of the output coefficients is done by jcdctmgr.c. This
+ * step requires an unsigned type and also one with twice the bits.
  */
 
 #if BITS_IN_JSAMPLE == 8
+#ifndef WITH_SIMD
 typedef int DCTELEM;		/* 16 or 32 bits is fine */
+typedef unsigned int UDCTELEM;
+typedef unsigned long long UDCTELEM2;
+#else
+typedef short DCTELEM;  /* prefer 16 bit with SIMD for parellelism */
+typedef unsigned short UDCTELEM;
+typedef unsigned int UDCTELEM2;
+#endif
 #else
 typedef INT32 DCTELEM;		/* must have 32 bits */
+typedef UINT32 UDCTELEM;
+typedef unsigned long long UDCTELEM2;
 #endif
 
-typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data));
-typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data));
-
 
 /*
  * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer

jddctmgr.c

@@ -2,6 +2,7 @@
  * jddctmgr.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -19,6 +20,7 @@
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jdct.h"		/* Private declarations for DCT subsystem */
+#include "jsimddct.h"
 
 
 /*
@@ -105,11 +107,17 @@ start_pass (j_decompress_ptr cinfo)
       method = JDCT_ISLOW;	/* jidctred uses islow-style table */
       break;
     case 2:
-      method_ptr = jpeg_idct_2x2;
+      if (jsimd_can_idct_2x2())
+        method_ptr = jsimd_idct_2x2;
+      else
+        method_ptr = jpeg_idct_2x2;
       method = JDCT_ISLOW;	/* jidctred uses islow-style table */
       break;
     case 4:
-      method_ptr = jpeg_idct_4x4;
+      if (jsimd_can_idct_4x4())
+        method_ptr = jsimd_idct_4x4;
+      else
+        method_ptr = jpeg_idct_4x4;
       method = JDCT_ISLOW;	/* jidctred uses islow-style table */
       break;
 #endif
@@ -117,19 +125,28 @@ start_pass (j_decompress_ptr cinfo)
       switch (cinfo->dct_method) {
 #ifdef DCT_ISLOW_SUPPORTED
       case JDCT_ISLOW:
-	method_ptr = jpeg_idct_islow;
+	if (jsimd_can_idct_islow())
+	  method_ptr = jsimd_idct_islow;
+	else
+	  method_ptr = jpeg_idct_islow;
 	method = JDCT_ISLOW;
 	break;
 #endif
 #ifdef DCT_IFAST_SUPPORTED
       case JDCT_IFAST:
-	method_ptr = jpeg_idct_ifast;
+	if (jsimd_can_idct_ifast())
+	  method_ptr = jsimd_idct_ifast;
+	else
+	  method_ptr = jpeg_idct_ifast;
 	method = JDCT_IFAST;
 	break;
 #endif
 #ifdef DCT_FLOAT_SUPPORTED
       case JDCT_FLOAT:
-	method_ptr = jpeg_idct_float;
+	if (jsimd_can_idct_float())
+	  method_ptr = jsimd_idct_float;
+	else
+	  method_ptr = jpeg_idct_float;
 	method = JDCT_FLOAT;
 	break;
 #endif

jdhuff.c

@@ -1,7 +1,7 @@
 /*
  * jdhuff.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,6 +14,21 @@
  * storage only upon successful completion of an MCU.
  */
 
+/* Modifications:
+ * Copyright (C)2007 Sun Microsystems, Inc.
+ * Copyright (C)2009 D. R. Commander
+ *
+ * This library is free software and may be redistributed and/or modified under
+ * the terms of the wxWindows Library License, Version 3.1 or (at your option)
+ * any later version.  The full license is in the LICENSE.txt file included
+ * with this distribution.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * wxWindows Library License for more details.
+ */
+
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
@@ -64,6 +79,15 @@ typedef struct {
   /* Pointers to derived tables (these workspaces have image lifespan) */
   d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS];
   d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS];
+
+  /* Precalculated info set up by start_pass for use in decode_mcu: */
+
+  /* Pointers to derived tables to be used for each block within an MCU */
+  d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU];
+  /* Whether we care about the DC and AC coefficient values for each block */
+  boolean dc_needed[D_MAX_BLOCKS_IN_MCU];
+  boolean ac_needed[D_MAX_BLOCKS_IN_MCU];
 } huff_entropy_decoder;
 
 typedef huff_entropy_decoder * huff_entropy_ptr;
@@ -77,7 +101,7 @@ METHODDEF(void)
 start_pass_huff_decoder (j_decompress_ptr cinfo)
 {
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  int ci, dctbl, actbl;
+  int ci, blkn, dctbl, actbl;
   jpeg_component_info * compptr;
 
   /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
@@ -92,27 +116,37 @@ start_pass_huff_decoder (j_decompress_ptr cinfo)
     compptr = cinfo->cur_comp_info[ci];
     dctbl = compptr->dc_tbl_no;
     actbl = compptr->ac_tbl_no;
-    /* Make sure requested tables are present */
-    if (dctbl < 0 || dctbl >= NUM_HUFF_TBLS ||
-	cinfo->dc_huff_tbl_ptrs[dctbl] == NULL)
-      ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, dctbl);
-    if (actbl < 0 || actbl >= NUM_HUFF_TBLS ||
-	cinfo->ac_huff_tbl_ptrs[actbl] == NULL)
-      ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, actbl);
     /* Compute derived values for Huffman tables */
     /* We may do this more than once for a table, but it's not expensive */
-    jpeg_make_d_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[dctbl],
+    jpeg_make_d_derived_tbl(cinfo, TRUE, dctbl,
 			    & entropy->dc_derived_tbls[dctbl]);
-    jpeg_make_d_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[actbl],
+    jpeg_make_d_derived_tbl(cinfo, FALSE, actbl,
 			    & entropy->ac_derived_tbls[actbl]);
     /* Initialize DC predictions to 0 */
     entropy->saved.last_dc_val[ci] = 0;
   }
 
+  /* Precalculate decoding info for each block in an MCU of this scan */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+    /* Precalculate which table to use for each block */
+    entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no];
+    entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no];
+    /* Decide whether we really care about the coefficient values */
+    if (compptr->component_needed) {
+      entropy->dc_needed[blkn] = TRUE;
+      /* we don't need the ACs if producing a 1/8th-size image */
+      entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1);
+    } else {
+      entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE;
+    }
+  }
+
   /* Initialize bitread state variables */
   entropy->bitstate.bits_left = 0;
   entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
-  entropy->bitstate.printed_eod = FALSE;
+  entropy->pub.insufficient_data = FALSE;
 
   /* Initialize restart counter */
   entropy->restarts_to_go = cinfo->restart_interval;
@@ -121,20 +155,35 @@ start_pass_huff_decoder (j_decompress_ptr cinfo)
 
 /*
  * Compute the derived values for a Huffman table.
+ * This routine also performs some validation checks on the table.
+ *
  * Note this is also used by jdphuff.c.
  */
 
 GLOBAL(void)
-jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl,
+jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno,
 			 d_derived_tbl ** pdtbl)
 {
+  JHUFF_TBL *htbl;
   d_derived_tbl *dtbl;
-  int p, i, l, si;
+  int p, i, l, si, numsymbols;
   int lookbits, ctr;
   char huffsize[257];
   unsigned int huffcode[257];
   unsigned int code;
 
+  /* Note that huffsize[] and huffcode[] are filled in code-length order,
+   * paralleling the order of the symbols themselves in htbl->huffval[].
+   */
+
+  /* Find the input Huffman table */
+  if (tblno < 0 || tblno >= NUM_HUFF_TBLS)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+  htbl =
+    isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno];
+  if (htbl == NULL)
+    ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno);
+
   /* Allocate a workspace if we haven't already done so. */
   if (*pdtbl == NULL)
     *pdtbl = (d_derived_tbl *)
@@ -144,17 +193,20 @@ jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl,
   dtbl->pub = htbl;		/* fill in back link */
   
   /* Figure C.1: make table of Huffman code length for each symbol */
-  /* Note that this is in code-length order. */
 
   p = 0;
   for (l = 1; l <= 16; l++) {
-    for (i = 1; i <= (int) htbl->bits[l]; i++)
+    i = (int) htbl->bits[l];
+    if (i < 0 || p + i > 256)	/* protect against table overrun */
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    while (i--)
       huffsize[p++] = (char) l;
   }
   huffsize[p] = 0;
+  numsymbols = p;
   
   /* Figure C.2: generate the codes themselves */
-  /* Note that this is in code-length order. */
+  /* We also validate that the counts represent a legal Huffman code tree. */
   
   code = 0;
   si = huffsize[0];
@@ -164,6 +216,11 @@ jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl,
       huffcode[p++] = code;
       code++;
     }
+    /* code is now 1 more than the last code used for codelength si; but
+     * it must still fit in si bits, since no code is allowed to be all ones.
+     */
+    if (((INT32) code) >= (((INT32) 1) << si))
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
     code <<= 1;
     si++;
   }
@@ -173,8 +230,10 @@ jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl,
   p = 0;
   for (l = 1; l <= 16; l++) {
     if (htbl->bits[l]) {
-      dtbl->valptr[l] = p; /* huffval[] index of 1st symbol of code length l */
-      dtbl->mincode[l] = huffcode[p]; /* minimum code of length l */
+      /* valoffset[l] = huffval[] index of 1st symbol of code length l,
+       * minus the minimum code of length l
+       */
+      dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p];
       p += htbl->bits[l];
       dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */
     } else {
@@ -190,7 +249,8 @@ jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl,
    * with that code.
    */
 
-  MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits));
+   for (i = 0; i < (1 << HUFF_LOOKAHEAD); i++)
+     dtbl->lookup[i] = (HUFF_LOOKAHEAD + 1) << HUFF_LOOKAHEAD;
 
   p = 0;
   for (l = 1; l <= HUFF_LOOKAHEAD; l++) {
@@ -199,12 +259,25 @@ jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, JHUFF_TBL * htbl,
       /* Generate left-justified code followed by all possible bit sequences */
       lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l);
       for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) {
-	dtbl->look_nbits[lookbits] = l;
-	dtbl->look_sym[lookbits] = htbl->huffval[p];
+	dtbl->lookup[lookbits] = (l << HUFF_LOOKAHEAD) | htbl->huffval[p];
 	lookbits++;
       }
     }
   }
+
+  /* Validate symbols as being reasonable.
+   * For AC tables, we make no check, but accept all byte values 0..255.
+   * For DC tables, we require the symbols to be in range 0..15.
+   * (Tighter bounds could be applied depending on the data depth and mode,
+   * but this is sufficient to ensure safe decoding.)
+   */
+  if (isDC) {
+    for (i = 0; i < numsymbols; i++) {
+      int sym = htbl->huffval[i];
+      if (sym < 0 || sym > 15)
+	ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
+    }
+  }
 }
 
 
@@ -239,68 +312,86 @@ jpeg_fill_bit_buffer (bitread_working_state * state,
   /* Copy heavily used state fields into locals (hopefully registers) */
   register const JOCTET * next_input_byte = state->next_input_byte;
   register size_t bytes_in_buffer = state->bytes_in_buffer;
-  register int c;
+  j_decompress_ptr cinfo = state->cinfo;
 
   /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */
   /* (It is assumed that no request will be for more than that many bits.) */
+  /* We fail to do so only if we hit a marker or are forced to suspend. */
 
-  while (bits_left < MIN_GET_BITS) {
-    /* Attempt to read a byte */
-    if (state->unread_marker != 0)
-      goto no_more_data;	/* can't advance past a marker */
+  if (cinfo->unread_marker == 0) {	/* cannot advance past a marker */
+    while (bits_left < MIN_GET_BITS) {
+      register int c;
 
-    if (bytes_in_buffer == 0) {
-      if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo))
-	return FALSE;
-      next_input_byte = state->cinfo->src->next_input_byte;
-      bytes_in_buffer = state->cinfo->src->bytes_in_buffer;
-    }
-    bytes_in_buffer--;
-    c = GETJOCTET(*next_input_byte++);
-
-    /* If it's 0xFF, check and discard stuffed zero byte */
-    if (c == 0xFF) {
-      do {
-	if (bytes_in_buffer == 0) {
-	  if (! (*state->cinfo->src->fill_input_buffer) (state->cinfo))
-	    return FALSE;
-	  next_input_byte = state->cinfo->src->next_input_byte;
-	  bytes_in_buffer = state->cinfo->src->bytes_in_buffer;
-	}
-	bytes_in_buffer--;
-	c = GETJOCTET(*next_input_byte++);
-      } while (c == 0xFF);
-
-      if (c == 0) {
-	/* Found FF/00, which represents an FF data byte */
-	c = 0xFF;
-      } else {
-	/* Oops, it's actually a marker indicating end of compressed data. */
-	/* Better put it back for use later */
-	state->unread_marker = c;
-
-      no_more_data:
-	/* There should be enough bits still left in the data segment; */
-	/* if so, just break out of the outer while loop. */
-	if (bits_left >= nbits)
-	  break;
-	/* Uh-oh.  Report corrupted data to user and stuff zeroes into
-	 * the data stream, so that we can produce some kind of image.
-	 * Note that this code will be repeated for each byte demanded
-	 * for the rest of the segment.  We use a nonvolatile flag to ensure
-	 * that only one warning message appears.
-	 */
-	if (! *(state->printed_eod_ptr)) {
-	  WARNMS(state->cinfo, JWRN_HIT_MARKER);
-	  *(state->printed_eod_ptr) = TRUE;
-	}
-	c = 0;			/* insert a zero byte into bit buffer */
+      /* Attempt to read a byte */
+      if (bytes_in_buffer == 0) {
+	if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	  return FALSE;
+	next_input_byte = cinfo->src->next_input_byte;
+	bytes_in_buffer = cinfo->src->bytes_in_buffer;
       }
-    }
+      bytes_in_buffer--;
+      c = GETJOCTET(*next_input_byte++);
 
-    /* OK, load c into get_buffer */
-    get_buffer = (get_buffer << 8) | c;
-    bits_left += 8;
+      /* If it's 0xFF, check and discard stuffed zero byte */
+      if (c == 0xFF) {
+	/* Loop here to discard any padding FF's on terminating marker,
+	 * so that we can save a valid unread_marker value.  NOTE: we will
+	 * accept multiple FF's followed by a 0 as meaning a single FF data
+	 * byte.  This data pattern is not valid according to the standard.
+	 */
+	do {
+	  if (bytes_in_buffer == 0) {
+	    if (! (*cinfo->src->fill_input_buffer) (cinfo))
+	      return FALSE;
+	    next_input_byte = cinfo->src->next_input_byte;
+	    bytes_in_buffer = cinfo->src->bytes_in_buffer;
+	  }
+	  bytes_in_buffer--;
+	  c = GETJOCTET(*next_input_byte++);
+	} while (c == 0xFF);
+
+	if (c == 0) {
+	  /* Found FF/00, which represents an FF data byte */
+	  c = 0xFF;
+	} else {
+	  /* Oops, it's actually a marker indicating end of compressed data.
+	   * Save the marker code for later use.
+	   * Fine point: it might appear that we should save the marker into
+	   * bitread working state, not straight into permanent state.  But
+	   * once we have hit a marker, we cannot need to suspend within the
+	   * current MCU, because we will read no more bytes from the data
+	   * source.  So it is OK to update permanent state right away.
+	   */
+	  cinfo->unread_marker = c;
+	  /* See if we need to insert some fake zero bits. */
+	  goto no_more_bytes;
+	}
+      }
+
+      /* OK, load c into get_buffer */
+      get_buffer = (get_buffer << 8) | c;
+      bits_left += 8;
+    } /* end while */
+  } else {
+  no_more_bytes:
+    /* We get here if we've read the marker that terminates the compressed
+     * data segment.  There should be enough bits in the buffer register
+     * to satisfy the request; if so, no problem.
+     */
+    if (nbits > bits_left) {
+      /* Uh-oh.  Report corrupted data to user and stuff zeroes into
+       * the data stream, so that we can produce some kind of image.
+       * We use a nonvolatile flag to ensure that only one warning message
+       * appears per data segment.
+       */
+      if (! cinfo->entropy->insufficient_data) {
+	WARNMS(cinfo, JWRN_HIT_MARKER);
+	cinfo->entropy->insufficient_data = TRUE;
+      }
+      /* Fill the buffer with zero bits */
+      get_buffer <<= MIN_GET_BITS - bits_left;
+      bits_left = MIN_GET_BITS;
+    }
   }
 
   /* Unload the local registers */
@@ -353,8 +444,7 @@ jpeg_huff_decode (bitread_working_state * state,
     return 0;			/* fake a zero as the safest result */
   }
 
-  return htbl->pub->huffval[ htbl->valptr[l] +
-			    ((int) (code - htbl->mincode[l])) ];
+  return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ];
 }
 
 
@@ -363,9 +453,10 @@ jpeg_huff_decode (bitread_working_state * state,
  * On some machines, a shift and add will be faster than a table lookup.
  */
 
+#define AVOID_TABLES
 #ifdef AVOID_TABLES
 
-#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
+#define HUFF_EXTEND(x,s)  ((x) + ((((x) - (1<<((s)-1))) >> 31) & (((-1)<<(s)) + 1)))
 
 #else
 
@@ -411,13 +502,248 @@ process_restart (j_decompress_ptr cinfo)
   /* Reset restart counter */
   entropy->restarts_to_go = cinfo->restart_interval;
 
-  /* Next segment can get another out-of-data warning */
-  entropy->bitstate.printed_eod = FALSE;
+  /* Reset out-of-data flag, unless read_restart_marker left us smack up
+   * against a marker.  In that case we will end up treating the next data
+   * segment as empty, and we can avoid producing bogus output pixels by
+   * leaving the flag set.
+   */
+  if (cinfo->unread_marker == 0)
+    entropy->pub.insufficient_data = FALSE;
 
   return TRUE;
 }
 
 
+LOCAL(boolean)
+decode_mcu_slow (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  BITREAD_STATE_VARS;
+  int blkn;
+  savable_state state;
+  /* Outer loop handles each block in the MCU */
+
+  /* Load up working state */
+  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+  ASSIGN_STATE(state, entropy->saved);
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    JBLOCKROW block = MCU_data[blkn];
+    d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
+    d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
+    register int s, k, r;
+
+    /* Decode a single block's worth of coefficients */
+
+    /* Section F.2.2.1: decode the DC coefficient difference */
+    HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
+    if (s) {
+      CHECK_BIT_BUFFER(br_state, s, return FALSE);
+      r = GET_BITS(s);
+      s = HUFF_EXTEND(r, s);
+    }
+
+    if (entropy->dc_needed[blkn]) {
+      /* Convert DC difference to actual value, update last_dc_val */
+      int ci = cinfo->MCU_membership[blkn];
+      s += state.last_dc_val[ci];
+      state.last_dc_val[ci] = s;
+      /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */
+      (*block)[0] = (JCOEF) s;
+    }
+
+    if (entropy->ac_needed[blkn]) {
+
+      /* Section F.2.2.2: decode the AC coefficients */
+      /* Since zeroes are skipped, output area must be cleared beforehand */
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE(s, br_state, actbl, return FALSE, label2);
+
+        r = s >> 4;
+        s &= 15;
+      
+        if (s) {
+          k += r;
+          CHECK_BIT_BUFFER(br_state, s, return FALSE);
+          r = GET_BITS(s);
+          s = HUFF_EXTEND(r, s);
+          /* Output coefficient in natural (dezigzagged) order.
+           * Note: the extra entries in jpeg_natural_order[] will save us
+           * if k >= DCTSIZE2, which could happen if the data is corrupted.
+           */
+          (*block)[jpeg_natural_order[k]] = (JCOEF) s;
+        } else {
+          if (r != 15)
+            break;
+          k += 15;
+        }
+      }
+
+    } else {
+
+      /* Section F.2.2.2: decode the AC coefficients */
+      /* In this path we just discard the values */
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
+
+        r = s >> 4;
+        s &= 15;
+
+        if (s) {
+          k += r;
+          CHECK_BIT_BUFFER(br_state, s, return FALSE);
+          DROP_BITS(s);
+        } else {
+          if (r != 15)
+            break;
+          k += 15;
+        }
+      }
+    }
+  }
+
+  /* Completed MCU, so update state */
+  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+  ASSIGN_STATE(entropy->saved, state);
+  return TRUE;
+}
+
+
+/***************************************************************/
+
+#define ADD_BYTE  {                                     \
+  int val0 = *(buffer++);                               \
+  int val1 = *(buffer);                                 \
+                                                        \
+  bits_left += 8;                                       \
+  get_buffer = (get_buffer << 8) | (val0);              \
+  if (val0 == 0xFF) {                                   \
+    buffer++;                                           \
+    if (val1 != 0) {                                    \
+      buffer   -= 2;                                    \
+      get_buffer      &= ~0xFF;                         \
+    }                                                   \
+  }                                                     \
+}
+
+/***************************************************************/
+
+#if __WORDSIZE == 64
+
+#define ENSURE_SHORT \
+  if (bits_left < 16) { \
+    ADD_BYTE ADD_BYTE ADD_BYTE ADD_BYTE ADD_BYTE ADD_BYTE \
+  }
+
+#else
+
+#define ENSURE_SHORT  if (bits_left < 16) { ADD_BYTE ADD_BYTE }
+
+#endif
+
+/***************************************************************/
+
+#define HUFF_DECODE_FAST(symbol, size, htbl) { \
+  ENSURE_SHORT \
+  symbol = PEEK_BITS(HUFF_LOOKAHEAD); \
+  symbol = htbl->lookup[symbol]; \
+  size = symbol >> 8; \
+  bits_left -= size; \
+  symbol = symbol & ((1 << HUFF_LOOKAHEAD) - 1); \
+  if (size == HUFF_LOOKAHEAD + 1) { \
+    symbol = (get_buffer >> bits_left) & ((1 << (size)) - 1); \
+    while (symbol > htbl->maxcode[size]) { \
+      symbol <<= 1; \
+      symbol |= GET_BITS(1); \
+      size++; \
+    } \
+    symbol = htbl->pub->huffval[ (int) (symbol + htbl->valoffset[size]) ]; \
+  } \
+}
+
+/***************************************************************/
+
+LOCAL(boolean)
+decode_mcu_fast (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  BITREAD_STATE_VARS;
+  JOCTET *buffer;
+  int blkn;
+  savable_state state;
+  /* Outer loop handles each block in the MCU */
+
+  /* Load up working state */
+  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+  buffer = (JOCTET *) br_state.next_input_byte;
+  ASSIGN_STATE(state, entropy->saved);
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    JBLOCKROW block = MCU_data[blkn];
+    d_derived_tbl * dctbl = entropy->dc_cur_tbls[blkn];
+    d_derived_tbl * actbl = entropy->ac_cur_tbls[blkn];
+    register int s, k, r, l;
+
+    HUFF_DECODE_FAST(s, l, dctbl);
+    if (s) {
+      ENSURE_SHORT
+      r = GET_BITS(s);
+      s = HUFF_EXTEND(r, s);
+    }
+
+    if (entropy->dc_needed[blkn]) {
+      int ci = cinfo->MCU_membership[blkn];
+      s += state.last_dc_val[ci];
+      state.last_dc_val[ci] = s;
+      (*block)[0] = (JCOEF) s;
+    }
+
+    if (entropy->ac_needed[blkn]) {
+
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE_FAST(s, l, actbl);
+        r = s >> 4;
+        s &= 15;
+      
+        if (s) {
+          k += r;
+          ENSURE_SHORT
+          r = GET_BITS(s);
+          s = HUFF_EXTEND(r, s);
+          (*block)[jpeg_natural_order[k]] = (JCOEF) s;
+        } else {
+          if (r != 15) break;
+          k += 15;
+        }
+      }
+
+    } else {
+
+      for (k = 1; k < DCTSIZE2; k++) {
+        HUFF_DECODE_FAST(s, l, actbl);
+        r = s >> 4;
+        s &= 15;
+
+        if (s) {
+          k += r;
+          ENSURE_SHORT
+          DROP_BITS(s);
+        } else {
+          if (r != 15) break;
+          k += 15;
+        }
+      }
+    }
+  }
+
+  br_state.bytes_in_buffer -= (buffer - br_state.next_input_byte);
+  br_state.next_input_byte = buffer;
+  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+  ASSIGN_STATE(entropy->saved, state);
+  return TRUE;
+}
+
+
 /*
  * Decode and return one MCU's worth of Huffman-compressed coefficients.
  * The coefficients are reordered from zigzag order into natural array order,
@@ -433,18 +759,12 @@ process_restart (j_decompress_ptr cinfo)
  * this module, since we'll just re-assign them on the next call.)
  */
 
+#define BUFSIZE (DCTSIZE2 * 2)
+
 METHODDEF(boolean)
 decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  register int s, k, r;
-  int blkn, ci;
-  JBLOCKROW block;
-  BITREAD_STATE_VARS;
-  savable_state state;
-  d_derived_tbl * dctbl;
-  d_derived_tbl * actbl;
-  jpeg_component_info * compptr;
 
   /* Process restart marker if needed; may have to suspend */
   if (cinfo->restart_interval) {
@@ -453,96 +773,20 @@ decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 	return FALSE;
   }
 
-  /* Load up working state */
-  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-  ASSIGN_STATE(state, entropy->saved);
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->pub.insufficient_data) {
 
-  /* Outer loop handles each block in the MCU */
-
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-    dctbl = entropy->dc_derived_tbls[compptr->dc_tbl_no];
-    actbl = entropy->ac_derived_tbls[compptr->ac_tbl_no];
-
-    /* Decode a single block's worth of coefficients */
-
-    /* Section F.2.2.1: decode the DC coefficient difference */
-    HUFF_DECODE(s, br_state, dctbl, return FALSE, label1);
-    if (s) {
-      CHECK_BIT_BUFFER(br_state, s, return FALSE);
-      r = GET_BITS(s);
-      s = HUFF_EXTEND(r, s);
+    if (cinfo->src->bytes_in_buffer >= BUFSIZE) {
+      if (!decode_mcu_fast(cinfo, MCU_data)) return FALSE;
+    }
+    else {
+      if (!decode_mcu_slow(cinfo, MCU_data)) return FALSE;
     }
 
-    /* Shortcut if component's values are not interesting */
-    if (! compptr->component_needed)
-      goto skip_ACs;
-
-    /* Convert DC difference to actual value, update last_dc_val */
-    s += state.last_dc_val[ci];
-    state.last_dc_val[ci] = s;
-    /* Output the DC coefficient (assumes jpeg_natural_order[0] = 0) */
-    (*block)[0] = (JCOEF) s;
-
-    /* Do we need to decode the AC coefficients for this component? */
-    if (compptr->DCT_scaled_size > 1) {
-
-      /* Section F.2.2.2: decode the AC coefficients */
-      /* Since zeroes are skipped, output area must be cleared beforehand */
-      for (k = 1; k < DCTSIZE2; k++) {
-	HUFF_DECODE(s, br_state, actbl, return FALSE, label2);
-      
-	r = s >> 4;
-	s &= 15;
-      
-	if (s) {
-	  k += r;
-	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
-	  r = GET_BITS(s);
-	  s = HUFF_EXTEND(r, s);
-	  /* Output coefficient in natural (dezigzagged) order.
-	   * Note: the extra entries in jpeg_natural_order[] will save us
-	   * if k >= DCTSIZE2, which could happen if the data is corrupted.
-	   */
-	  (*block)[jpeg_natural_order[k]] = (JCOEF) s;
-	} else {
-	  if (r != 15)
-	    break;
-	  k += 15;
-	}
-      }
-
-    } else {
-skip_ACs:
-
-      /* Section F.2.2.2: decode the AC coefficients */
-      /* In this path we just discard the values */
-      for (k = 1; k < DCTSIZE2; k++) {
-	HUFF_DECODE(s, br_state, actbl, return FALSE, label3);
-      
-	r = s >> 4;
-	s &= 15;
-      
-	if (s) {
-	  k += r;
-	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
-	  DROP_BITS(s);
-	} else {
-	  if (r != 15)
-	    break;
-	  k += 15;
-	}
-      }
-
-    }
   }
 
-  /* Completed MCU, so update state */
-  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-  ASSIGN_STATE(entropy->saved, state);
-
   /* Account for restart interval (no-op if not using restarts) */
   entropy->restarts_to_go--;
 

jdhuff.h

@@ -1,7 +1,7 @@
 /*
  * jdhuff.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -25,26 +25,34 @@
 
 typedef struct {
   /* Basic tables: (element [0] of each array is unused) */
-  INT32 mincode[17];		/* smallest code of length k */
   INT32 maxcode[18];		/* largest code of length k (-1 if none) */
   /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
-  int valptr[17];		/* huffval[] index of 1st symbol of length k */
+  INT32 valoffset[17];		/* huffval[] offset for codes of length k */
+  /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
+   * the smallest code of length k; so given a code of length k, the
+   * corresponding symbol is huffval[code + valoffset[k]]
+   */
 
   /* Link to public Huffman table (needed only in jpeg_huff_decode) */
   JHUFF_TBL *pub;
 
-  /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of
+  /* Lookahead table: indexed by the next HUFF_LOOKAHEAD bits of
    * the input data stream.  If the next Huffman code is no more
    * than HUFF_LOOKAHEAD bits long, we can obtain its length and
-   * the corresponding symbol directly from these tables.
+   * the corresponding symbol directly from this tables.
+   *
+   * The lower 8 bits of each table entry contain the number of
+   * bits in the corresponding Huffman code, or HUFF_LOOKAHEAD + 1
+   * if too long.  The next 8 bits of each entry contain the
+   * symbol.
    */
-  int look_nbits[1<<HUFF_LOOKAHEAD]; /* # bits, or 0 if too long */
-  UINT8 look_sym[1<<HUFF_LOOKAHEAD]; /* symbol, or unused */
+  int lookup[1<<HUFF_LOOKAHEAD];
 } d_derived_tbl;
 
 /* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_d_derived_tbl JPP((j_decompress_ptr cinfo,
-				JHUFF_TBL * htbl, d_derived_tbl ** pdtbl));
+EXTERN(void) jpeg_make_d_derived_tbl
+	JPP((j_decompress_ptr cinfo, boolean isDC, int tblno,
+	     d_derived_tbl ** pdtbl));
 
 
 /*
@@ -65,35 +73,42 @@ EXTERN(void) jpeg_make_d_derived_tbl JPP((j_decompress_ptr cinfo,
  * necessary.
  */
 
+#if __WORDSIZE == 64
+
+typedef long bit_buf_type;	/* type of bit-extraction buffer */
+#define BIT_BUF_SIZE  64		/* size of buffer in bits */
+
+#else
+
 typedef INT32 bit_buf_type;	/* type of bit-extraction buffer */
-#define BIT_BUF_SIZE  32	/* size of buffer in bits */
+#define BIT_BUF_SIZE  32		/* size of buffer in bits */
+
+#endif
 
 /* If long is > 32 bits on your machine, and shifting/masking longs is
  * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
- * appropriately should be a win.  Unfortunately we can't do this with
- * something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
+ * appropriately should be a win.  Unfortunately we can't define the size
+ * with something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
  * because not all machines measure sizeof in 8-bit bytes.
  */
 
 typedef struct {		/* Bitreading state saved across MCUs */
   bit_buf_type get_buffer;	/* current bit-extraction buffer */
   int bits_left;		/* # of unused bits in it */
-  boolean printed_eod;		/* flag to suppress multiple warning msgs */
 } bitread_perm_state;
 
 typedef struct {		/* Bitreading working state within an MCU */
-  /* current data source state */
+  /* Current data source location */
+  /* We need a copy, rather than munging the original, in case of suspension */
   const JOCTET * next_input_byte; /* => next byte to read from source */
   size_t bytes_in_buffer;	/* # of bytes remaining in source buffer */
-  int unread_marker;		/* nonzero if we have hit a marker */
-  /* bit input buffer --- note these values are kept in register variables,
+  /* Bit input buffer --- note these values are kept in register variables,
    * not in this struct, inside the inner loops.
    */
   bit_buf_type get_buffer;	/* current bit-extraction buffer */
   int bits_left;		/* # of unused bits in it */
-  /* pointers needed by jpeg_fill_bit_buffer */
+  /* Pointer needed by jpeg_fill_bit_buffer. */
   j_decompress_ptr cinfo;	/* back link to decompress master record */
-  boolean * printed_eod_ptr;	/* => flag in permanent state */
 } bitread_working_state;
 
 /* Macros to declare and load/save bitread local variables. */
@@ -106,15 +121,12 @@ typedef struct {		/* Bitreading working state within an MCU */
 	br_state.cinfo = cinfop; \
 	br_state.next_input_byte = cinfop->src->next_input_byte; \
 	br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
-	br_state.unread_marker = cinfop->unread_marker; \
 	get_buffer = permstate.get_buffer; \
-	bits_left = permstate.bits_left; \
-	br_state.printed_eod_ptr = & permstate.printed_eod
+	bits_left = permstate.bits_left;
 
 #define BITREAD_SAVE_STATE(cinfop,permstate)  \
 	cinfop->src->next_input_byte = br_state.next_input_byte; \
 	cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
-	cinfop->unread_marker = br_state.unread_marker; \
 	permstate.get_buffer = get_buffer; \
 	permstate.bits_left = bits_left
 
@@ -184,11 +196,10 @@ EXTERN(boolean) jpeg_fill_bit_buffer
     } \
   } \
   look = PEEK_BITS(HUFF_LOOKAHEAD); \
-  if ((nb = htbl->look_nbits[look]) != 0) { \
+  if ((nb = (htbl->lookup[look] >> HUFF_LOOKAHEAD)) <= HUFF_LOOKAHEAD) { \
     DROP_BITS(nb); \
-    result = htbl->look_sym[look]; \
+    result = htbl->lookup[look] & ((1 << HUFF_LOOKAHEAD) - 1); \
   } else { \
-    nb = HUFF_LOOKAHEAD+1; \
 slowlabel: \
     if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \
 	{ failaction; } \

jdinput.c

@@ -1,7 +1,7 @@
 /*
  * jdinput.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -301,7 +301,7 @@ consume_markers (j_decompress_ptr cinfo)
       initial_setup(cinfo);
       inputctl->inheaders = FALSE;
       /* Note: start_input_pass must be called by jdmaster.c
-       * before any more input can be consumed.  jdapi.c is
+       * before any more input can be consumed.  jdapimin.c is
        * responsible for enforcing this sequencing.
        */
     } else {			/* 2nd or later SOS marker */

jdmarker.c

@@ -1,7 +1,7 @@
 /*
  * jdmarker.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -85,6 +85,28 @@ typedef enum {			/* JPEG marker codes */
 } JPEG_MARKER;
 
 
+/* Private state */
+
+typedef struct {
+  struct jpeg_marker_reader pub; /* public fields */
+
+  /* Application-overridable marker processing methods */
+  jpeg_marker_parser_method process_COM;
+  jpeg_marker_parser_method process_APPn[16];
+
+  /* Limit on marker data length to save for each marker type */
+  unsigned int length_limit_COM;
+  unsigned int length_limit_APPn[16];
+
+  /* Status of COM/APPn marker saving */
+  jpeg_saved_marker_ptr cur_marker;	/* NULL if not processing a marker */
+  unsigned int bytes_read;		/* data bytes read so far in marker */
+  /* Note: cur_marker is not linked into marker_list until it's all read. */
+} my_marker_reader;
+
+typedef my_marker_reader * my_marker_ptr;
+
+
 /*
  * Macros for fetching data from the data source module.
  *
@@ -104,7 +126,7 @@ typedef enum {			/* JPEG marker codes */
 	( datasrc->next_input_byte = next_input_byte,  \
 	  datasrc->bytes_in_buffer = bytes_in_buffer )
 
-/* Reload the local copies --- seldom used except in MAKE_BYTE_AVAIL */
+/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */
 #define INPUT_RELOAD(cinfo)  \
 	( next_input_byte = datasrc->next_input_byte,  \
 	  bytes_in_buffer = datasrc->bytes_in_buffer )
@@ -118,14 +140,14 @@ typedef enum {			/* JPEG marker codes */
 	  if (! (*datasrc->fill_input_buffer) (cinfo))  \
 	    { action; }  \
 	  INPUT_RELOAD(cinfo);  \
-	}  \
-	bytes_in_buffer--
+	}
 
 /* Read a byte into variable V.
  * If must suspend, take the specified action (typically "return FALSE").
  */
 #define INPUT_BYTE(cinfo,V,action)  \
 	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
 		  V = GETJOCTET(*next_input_byte++); )
 
 /* As above, but read two bytes interpreted as an unsigned 16-bit integer.
@@ -133,8 +155,10 @@ typedef enum {			/* JPEG marker codes */
  */
 #define INPUT_2BYTES(cinfo,V,action)  \
 	MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
 		  V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \
 		  MAKE_BYTE_AVAIL(cinfo,action); \
+		  bytes_in_buffer--; \
 		  V += GETJOCTET(*next_input_byte++); )
 
 
@@ -150,11 +174,18 @@ typedef enum {			/* JPEG marker codes */
  *   marker parameters; restart point has not been moved.  Same routine
  *   will be called again after application supplies more input data.
  *
- * This approach to suspension assumes that all of a marker's parameters can
- * fit into a single input bufferload.  This should hold for "normal"
- * markers.  Some COM/APPn markers might have large parameter segments,
- * but we use skip_input_data to get past those, and thereby put the problem
- * on the source manager's shoulders.
+ * This approach to suspension assumes that all of a marker's parameters
+ * can fit into a single input bufferload.  This should hold for "normal"
+ * markers.  Some COM/APPn markers might have large parameter segments
+ * that might not fit.  If we are simply dropping such a marker, we use
+ * skip_input_data to get past it, and thereby put the problem on the
+ * source manager's shoulders.  If we are saving the marker's contents
+ * into memory, we use a slightly different convention: when forced to
+ * suspend, the marker processor updates the restart point to the end of
+ * what it's consumed (ie, the end of the buffer) before returning FALSE.
+ * On resumption, cinfo->unread_marker still contains the marker code,
+ * but the data source will point to the next chunk of marker data.
+ * The marker processor must retain internal state to deal with this.
  *
  * Note that we don't bother to avoid duplicate trace messages if a
  * suspension occurs within marker parameters.  Other side effects
@@ -188,7 +219,9 @@ get_soi (j_decompress_ptr cinfo)
   cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
 
   cinfo->saw_JFIF_marker = FALSE;
-  cinfo->density_unit = 0;	/* set default JFIF APP0 values */
+  cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */
+  cinfo->JFIF_minor_version = 1;
+  cinfo->density_unit = 0;
   cinfo->X_density = 1;
   cinfo->Y_density = 1;
   cinfo->saw_Adobe_marker = FALSE;
@@ -280,11 +313,11 @@ get_sos (j_decompress_ptr cinfo)
 
   INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */
 
+  TRACEMS1(cinfo, 1, JTRC_SOS, n);
+
   if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN)
     ERREXIT(cinfo, JERR_BAD_LENGTH);
 
-  TRACEMS1(cinfo, 1, JTRC_SOS, n);
-
   cinfo->comps_in_scan = n;
 
   /* Collect the component-spec parameters */
@@ -334,111 +367,7 @@ get_sos (j_decompress_ptr cinfo)
 }
 
 
-METHODDEF(boolean)
-get_app0 (j_decompress_ptr cinfo)
-/* Process an APP0 marker */
-{
-#define JFIF_LEN 14
-  INT32 length;
-  UINT8 b[JFIF_LEN];
-  int buffp;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-
-  /* See if a JFIF APP0 marker is present */
-
-  if (length >= JFIF_LEN) {
-    for (buffp = 0; buffp < JFIF_LEN; buffp++)
-      INPUT_BYTE(cinfo, b[buffp], return FALSE);
-    length -= JFIF_LEN;
-
-    if (b[0]==0x4A && b[1]==0x46 && b[2]==0x49 && b[3]==0x46 && b[4]==0) {
-      /* Found JFIF APP0 marker: check version */
-      /* Major version must be 1, anything else signals an incompatible change.
-       * We used to treat this as an error, but now it's a nonfatal warning,
-       * because some bozo at Hijaak couldn't read the spec.
-       * Minor version should be 0..2, but process anyway if newer.
-       */
-      if (b[5] != 1)
-	WARNMS2(cinfo, JWRN_JFIF_MAJOR, b[5], b[6]);
-      else if (b[6] > 2)
-	TRACEMS2(cinfo, 1, JTRC_JFIF_MINOR, b[5], b[6]);
-      /* Save info */
-      cinfo->saw_JFIF_marker = TRUE;
-      cinfo->density_unit = b[7];
-      cinfo->X_density = (b[8] << 8) + b[9];
-      cinfo->Y_density = (b[10] << 8) + b[11];
-      TRACEMS3(cinfo, 1, JTRC_JFIF,
-	       cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
-      if (b[12] | b[13])
-	TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, b[12], b[13]);
-      if (length != ((INT32) b[12] * (INT32) b[13] * (INT32) 3))
-	TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) length);
-    } else {
-      /* Start of APP0 does not match "JFIF" */
-      TRACEMS1(cinfo, 1, JTRC_APP0, (int) length + JFIF_LEN);
-    }
-  } else {
-    /* Too short to be JFIF marker */
-    TRACEMS1(cinfo, 1, JTRC_APP0, (int) length);
-  }
-
-  INPUT_SYNC(cinfo);
-  if (length > 0)		/* skip any remaining data -- could be lots */
-    (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
-  return TRUE;
-}
-
-
-METHODDEF(boolean)
-get_app14 (j_decompress_ptr cinfo)
-/* Process an APP14 marker */
-{
-#define ADOBE_LEN 12
-  INT32 length;
-  UINT8 b[ADOBE_LEN];
-  int buffp;
-  unsigned int version, flags0, flags1, transform;
-  INPUT_VARS(cinfo);
-
-  INPUT_2BYTES(cinfo, length, return FALSE);
-  length -= 2;
-
-  /* See if an Adobe APP14 marker is present */
-
-  if (length >= ADOBE_LEN) {
-    for (buffp = 0; buffp < ADOBE_LEN; buffp++)
-      INPUT_BYTE(cinfo, b[buffp], return FALSE);
-    length -= ADOBE_LEN;
-
-    if (b[0]==0x41 && b[1]==0x64 && b[2]==0x6F && b[3]==0x62 && b[4]==0x65) {
-      /* Found Adobe APP14 marker */
-      version = (b[5] << 8) + b[6];
-      flags0 = (b[7] << 8) + b[8];
-      flags1 = (b[9] << 8) + b[10];
-      transform = b[11];
-      TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
-      cinfo->saw_Adobe_marker = TRUE;
-      cinfo->Adobe_transform = (UINT8) transform;
-    } else {
-      /* Start of APP14 does not match "Adobe" */
-      TRACEMS1(cinfo, 1, JTRC_APP14, (int) length + ADOBE_LEN);
-    }
-  } else {
-    /* Too short to be Adobe marker */
-    TRACEMS1(cinfo, 1, JTRC_APP14, (int) length);
-  }
-
-  INPUT_SYNC(cinfo);
-  if (length > 0)		/* skip any remaining data -- could be lots */
-    (*cinfo->src->skip_input_data) (cinfo, (long) length);
-
-  return TRUE;
-}
-
+#ifdef D_ARITH_CODING_SUPPORTED
 
 LOCAL(boolean)
 get_dac (j_decompress_ptr cinfo)
@@ -472,10 +401,19 @@ get_dac (j_decompress_ptr cinfo)
     }
   }
 
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   INPUT_SYNC(cinfo);
   return TRUE;
 }
 
+#else /* ! D_ARITH_CODING_SUPPORTED */
+
+#define get_dac(cinfo)  skip_variable(cinfo)
+
+#endif /* D_ARITH_CODING_SUPPORTED */
+
 
 LOCAL(boolean)
 get_dht (j_decompress_ptr cinfo)
@@ -491,7 +429,7 @@ get_dht (j_decompress_ptr cinfo)
   INPUT_2BYTES(cinfo, length, return FALSE);
   length -= 2;
   
-  while (length > 0) {
+  while (length > 16) {
     INPUT_BYTE(cinfo, index, return FALSE);
 
     TRACEMS1(cinfo, 1, JTRC_DHT, index);
@@ -512,8 +450,11 @@ get_dht (j_decompress_ptr cinfo)
 	     bits[9], bits[10], bits[11], bits[12],
 	     bits[13], bits[14], bits[15], bits[16]);
 
+    /* Here we just do minimal validation of the counts to avoid walking
+     * off the end of our table space.  jdhuff.c will check more carefully.
+     */
     if (count > 256 || ((INT32) count) > length)
-      ERREXIT(cinfo, JERR_DHT_COUNTS);
+      ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
 
     for (i = 0; i < count; i++)
       INPUT_BYTE(cinfo, huffval[i], return FALSE);
@@ -537,6 +478,9 @@ get_dht (j_decompress_ptr cinfo)
     MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval));
   }
 
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   INPUT_SYNC(cinfo);
   return TRUE;
 }
@@ -592,6 +536,9 @@ get_dqt (j_decompress_ptr cinfo)
     if (prec) length -= DCTSIZE2;
   }
 
+  if (length != 0)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
   INPUT_SYNC(cinfo);
   return TRUE;
 }
@@ -621,6 +568,279 @@ get_dri (j_decompress_ptr cinfo)
 }
 
 
+/*
+ * Routines for processing APPn and COM markers.
+ * These are either saved in memory or discarded, per application request.
+ * APP0 and APP14 are specially checked to see if they are
+ * JFIF and Adobe markers, respectively.
+ */
+
+#define APP0_DATA_LEN	14	/* Length of interesting data in APP0 */
+#define APP14_DATA_LEN	12	/* Length of interesting data in APP14 */
+#define APPN_DATA_LEN	14	/* Must be the largest of the above!! */
+
+
+LOCAL(void)
+examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
+	      unsigned int datalen, INT32 remaining)
+/* Examine first few bytes from an APP0.
+ * Take appropriate action if it is a JFIF marker.
+ * datalen is # of bytes at data[], remaining is length of rest of marker data.
+ */
+{
+  INT32 totallen = (INT32) datalen + remaining;
+
+  if (datalen >= APP0_DATA_LEN &&
+      GETJOCTET(data[0]) == 0x4A &&
+      GETJOCTET(data[1]) == 0x46 &&
+      GETJOCTET(data[2]) == 0x49 &&
+      GETJOCTET(data[3]) == 0x46 &&
+      GETJOCTET(data[4]) == 0) {
+    /* Found JFIF APP0 marker: save info */
+    cinfo->saw_JFIF_marker = TRUE;
+    cinfo->JFIF_major_version = GETJOCTET(data[5]);
+    cinfo->JFIF_minor_version = GETJOCTET(data[6]);
+    cinfo->density_unit = GETJOCTET(data[7]);
+    cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
+    cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
+    /* Check version.
+     * Major version must be 1, anything else signals an incompatible change.
+     * (We used to treat this as an error, but now it's a nonfatal warning,
+     * because some bozo at Hijaak couldn't read the spec.)
+     * Minor version should be 0..2, but process anyway if newer.
+     */
+    if (cinfo->JFIF_major_version != 1)
+      WARNMS2(cinfo, JWRN_JFIF_MAJOR,
+	      cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
+    /* Generate trace messages */
+    TRACEMS5(cinfo, 1, JTRC_JFIF,
+	     cinfo->JFIF_major_version, cinfo->JFIF_minor_version,
+	     cinfo->X_density, cinfo->Y_density, cinfo->density_unit);
+    /* Validate thumbnail dimensions and issue appropriate messages */
+    if (GETJOCTET(data[12]) | GETJOCTET(data[13]))
+      TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL,
+	       GETJOCTET(data[12]), GETJOCTET(data[13]));
+    totallen -= APP0_DATA_LEN;
+    if (totallen !=
+	((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3))
+      TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen);
+  } else if (datalen >= 6 &&
+      GETJOCTET(data[0]) == 0x4A &&
+      GETJOCTET(data[1]) == 0x46 &&
+      GETJOCTET(data[2]) == 0x58 &&
+      GETJOCTET(data[3]) == 0x58 &&
+      GETJOCTET(data[4]) == 0) {
+    /* Found JFIF "JFXX" extension APP0 marker */
+    /* The library doesn't actually do anything with these,
+     * but we try to produce a helpful trace message.
+     */
+    switch (GETJOCTET(data[5])) {
+    case 0x10:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen);
+      break;
+    case 0x11:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen);
+      break;
+    case 0x13:
+      TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen);
+      break;
+    default:
+      TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION,
+	       GETJOCTET(data[5]), (int) totallen);
+      break;
+    }
+  } else {
+    /* Start of APP0 does not match "JFIF" or "JFXX", or too short */
+    TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen);
+  }
+}
+
+
+LOCAL(void)
+examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data,
+	       unsigned int datalen, INT32 remaining)
+/* Examine first few bytes from an APP14.
+ * Take appropriate action if it is an Adobe marker.
+ * datalen is # of bytes at data[], remaining is length of rest of marker data.
+ */
+{
+  unsigned int version, flags0, flags1, transform;
+
+  if (datalen >= APP14_DATA_LEN &&
+      GETJOCTET(data[0]) == 0x41 &&
+      GETJOCTET(data[1]) == 0x64 &&
+      GETJOCTET(data[2]) == 0x6F &&
+      GETJOCTET(data[3]) == 0x62 &&
+      GETJOCTET(data[4]) == 0x65) {
+    /* Found Adobe APP14 marker */
+    version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]);
+    flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]);
+    flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]);
+    transform = GETJOCTET(data[11]);
+    TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform);
+    cinfo->saw_Adobe_marker = TRUE;
+    cinfo->Adobe_transform = (UINT8) transform;
+  } else {
+    /* Start of APP14 does not match "Adobe", or too short */
+    TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining));
+  }
+}
+
+
+METHODDEF(boolean)
+get_interesting_appn (j_decompress_ptr cinfo)
+/* Process an APP0 or APP14 marker without saving it */
+{
+  INT32 length;
+  JOCTET b[APPN_DATA_LEN];
+  unsigned int i, numtoread;
+  INPUT_VARS(cinfo);
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
+
+  /* get the interesting part of the marker data */
+  if (length >= APPN_DATA_LEN)
+    numtoread = APPN_DATA_LEN;
+  else if (length > 0)
+    numtoread = (unsigned int) length;
+  else
+    numtoread = 0;
+  for (i = 0; i < numtoread; i++)
+    INPUT_BYTE(cinfo, b[i], return FALSE);
+  length -= numtoread;
+
+  /* process it */
+  switch (cinfo->unread_marker) {
+  case M_APP0:
+    examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length);
+    break;
+  case M_APP14:
+    examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length);
+    break;
+  default:
+    /* can't get here unless jpeg_save_markers chooses wrong processor */
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
+    break;
+  }
+
+  /* skip any remaining data -- could be lots */
+  INPUT_SYNC(cinfo);
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
+
+  return TRUE;
+}
+
+
+#ifdef SAVE_MARKERS_SUPPORTED
+
+METHODDEF(boolean)
+save_marker (j_decompress_ptr cinfo)
+/* Save an APPn or COM marker into the marker list */
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  jpeg_saved_marker_ptr cur_marker = marker->cur_marker;
+  unsigned int bytes_read, data_length;
+  JOCTET FAR * data;
+  INT32 length = 0;
+  INPUT_VARS(cinfo);
+
+  if (cur_marker == NULL) {
+    /* begin reading a marker */
+    INPUT_2BYTES(cinfo, length, return FALSE);
+    length -= 2;
+    if (length >= 0) {		/* watch out for bogus length word */
+      /* figure out how much we want to save */
+      unsigned int limit;
+      if (cinfo->unread_marker == (int) M_COM)
+	limit = marker->length_limit_COM;
+      else
+	limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0];
+      if ((unsigned int) length < limit)
+	limit = (unsigned int) length;
+      /* allocate and initialize the marker item */
+      cur_marker = (jpeg_saved_marker_ptr)
+	(*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				    SIZEOF(struct jpeg_marker_struct) + limit);
+      cur_marker->next = NULL;
+      cur_marker->marker = (UINT8) cinfo->unread_marker;
+      cur_marker->original_length = (unsigned int) length;
+      cur_marker->data_length = limit;
+      /* data area is just beyond the jpeg_marker_struct */
+      data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1);
+      marker->cur_marker = cur_marker;
+      marker->bytes_read = 0;
+      bytes_read = 0;
+      data_length = limit;
+    } else {
+      /* deal with bogus length word */
+      bytes_read = data_length = 0;
+      data = NULL;
+    }
+  } else {
+    /* resume reading a marker */
+    bytes_read = marker->bytes_read;
+    data_length = cur_marker->data_length;
+    data = cur_marker->data + bytes_read;
+  }
+
+  while (bytes_read < data_length) {
+    INPUT_SYNC(cinfo);		/* move the restart point to here */
+    marker->bytes_read = bytes_read;
+    /* If there's not at least one byte in buffer, suspend */
+    MAKE_BYTE_AVAIL(cinfo, return FALSE);
+    /* Copy bytes with reasonable rapidity */
+    while (bytes_read < data_length && bytes_in_buffer > 0) {
+      *data++ = *next_input_byte++;
+      bytes_in_buffer--;
+      bytes_read++;
+    }
+  }
+
+  /* Done reading what we want to read */
+  if (cur_marker != NULL) {	/* will be NULL if bogus length word */
+    /* Add new marker to end of list */
+    if (cinfo->marker_list == NULL) {
+      cinfo->marker_list = cur_marker;
+    } else {
+      jpeg_saved_marker_ptr prev = cinfo->marker_list;
+      while (prev->next != NULL)
+	prev = prev->next;
+      prev->next = cur_marker;
+    }
+    /* Reset pointer & calc remaining data length */
+    data = cur_marker->data;
+    length = cur_marker->original_length - data_length;
+  }
+  /* Reset to initial state for next marker */
+  marker->cur_marker = NULL;
+
+  /* Process the marker if interesting; else just make a generic trace msg */
+  switch (cinfo->unread_marker) {
+  case M_APP0:
+    examine_app0(cinfo, data, data_length, length);
+    break;
+  case M_APP14:
+    examine_app14(cinfo, data, data_length, length);
+    break;
+  default:
+    TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker,
+	     (int) (data_length + length));
+    break;
+  }
+
+  /* skip any remaining data -- could be lots */
+  INPUT_SYNC(cinfo);		/* do before skip_input_data */
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
+
+  return TRUE;
+}
+
+#endif /* SAVE_MARKERS_SUPPORTED */
+
+
 METHODDEF(boolean)
 skip_variable (j_decompress_ptr cinfo)
 /* Skip over an unknown or uninteresting variable-length marker */
@@ -629,11 +849,13 @@ skip_variable (j_decompress_ptr cinfo)
   INPUT_VARS(cinfo);
 
   INPUT_2BYTES(cinfo, length, return FALSE);
+  length -= 2;
   
   TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length);
 
   INPUT_SYNC(cinfo);		/* do before skip_input_data */
-  (*cinfo->src->skip_input_data) (cinfo, (long) length - 2L);
+  if (length > 0)
+    (*cinfo->src->skip_input_data) (cinfo, (long) length);
 
   return TRUE;
 }
@@ -833,12 +1055,13 @@ read_markers (j_decompress_ptr cinfo)
     case M_APP13:
     case M_APP14:
     case M_APP15:
-      if (! (*cinfo->marker->process_APPn[cinfo->unread_marker - (int) M_APP0]) (cinfo))
+      if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[
+		cinfo->unread_marker - (int) M_APP0]) (cinfo))
 	return JPEG_SUSPENDED;
       break;
       
     case M_COM:
-      if (! (*cinfo->marker->process_COM) (cinfo))
+      if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
 	return JPEG_SUSPENDED;
       break;
 
@@ -1018,12 +1241,15 @@ jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired)
 METHODDEF(void)
 reset_marker_reader (j_decompress_ptr cinfo)
 {
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
   cinfo->comp_info = NULL;		/* until allocated by get_sof */
   cinfo->input_scan_number = 0;		/* no SOS seen yet */
   cinfo->unread_marker = 0;		/* no pending marker */
-  cinfo->marker->saw_SOI = FALSE;	/* set internal state too */
-  cinfo->marker->saw_SOF = FALSE;
-  cinfo->marker->discarded_bytes = 0;
+  marker->pub.saw_SOI = FALSE;		/* set internal state too */
+  marker->pub.saw_SOF = FALSE;
+  marker->pub.discarded_bytes = 0;
+  marker->cur_marker = NULL;
 }
 
 
@@ -1035,21 +1261,100 @@ reset_marker_reader (j_decompress_ptr cinfo)
 GLOBAL(void)
 jinit_marker_reader (j_decompress_ptr cinfo)
 {
+  my_marker_ptr marker;
   int i;
 
   /* Create subobject in permanent pool */
-  cinfo->marker = (struct jpeg_marker_reader *)
+  marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
-				SIZEOF(struct jpeg_marker_reader));
-  /* Initialize method pointers */
-  cinfo->marker->reset_marker_reader = reset_marker_reader;
-  cinfo->marker->read_markers = read_markers;
-  cinfo->marker->read_restart_marker = read_restart_marker;
-  cinfo->marker->process_COM = skip_variable;
-  for (i = 0; i < 16; i++)
-    cinfo->marker->process_APPn[i] = skip_variable;
-  cinfo->marker->process_APPn[0] = get_app0;
-  cinfo->marker->process_APPn[14] = get_app14;
+				SIZEOF(my_marker_reader));
+  cinfo->marker = (struct jpeg_marker_reader *) marker;
+  /* Initialize public method pointers */
+  marker->pub.reset_marker_reader = reset_marker_reader;
+  marker->pub.read_markers = read_markers;
+  marker->pub.read_restart_marker = read_restart_marker;
+  /* Initialize COM/APPn processing.
+   * By default, we examine and then discard APP0 and APP14,
+   * but simply discard COM and all other APPn.
+   */
+  marker->process_COM = skip_variable;
+  marker->length_limit_COM = 0;
+  for (i = 0; i < 16; i++) {
+    marker->process_APPn[i] = skip_variable;
+    marker->length_limit_APPn[i] = 0;
+  }
+  marker->process_APPn[0] = get_interesting_appn;
+  marker->process_APPn[14] = get_interesting_appn;
   /* Reset marker processing state */
   reset_marker_reader(cinfo);
 }
+
+
+/*
+ * Control saving of COM and APPn markers into marker_list.
+ */
+
+#ifdef SAVE_MARKERS_SUPPORTED
+
+GLOBAL(void)
+jpeg_save_markers (j_decompress_ptr cinfo, int marker_code,
+		   unsigned int length_limit)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+  long maxlength;
+  jpeg_marker_parser_method processor;
+
+  /* Length limit mustn't be larger than what we can allocate
+   * (should only be a concern in a 16-bit environment).
+   */
+  maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct);
+  if (((long) length_limit) > maxlength)
+    length_limit = (unsigned int) maxlength;
+
+  /* Choose processor routine to use.
+   * APP0/APP14 have special requirements.
+   */
+  if (length_limit) {
+    processor = save_marker;
+    /* If saving APP0/APP14, save at least enough for our internal use. */
+    if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN)
+      length_limit = APP0_DATA_LEN;
+    else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN)
+      length_limit = APP14_DATA_LEN;
+  } else {
+    processor = skip_variable;
+    /* If discarding APP0/APP14, use our regular on-the-fly processor. */
+    if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14)
+      processor = get_interesting_appn;
+  }
+
+  if (marker_code == (int) M_COM) {
+    marker->process_COM = processor;
+    marker->length_limit_COM = length_limit;
+  } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) {
+    marker->process_APPn[marker_code - (int) M_APP0] = processor;
+    marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit;
+  } else
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
+}
+
+#endif /* SAVE_MARKERS_SUPPORTED */
+
+
+/*
+ * Install a special processing method for COM or APPn markers.
+ */
+
+GLOBAL(void)
+jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code,
+			   jpeg_marker_parser_method routine)
+{
+  my_marker_ptr marker = (my_marker_ptr) cinfo->marker;
+
+  if (marker_code == (int) M_COM)
+    marker->process_COM = routine;
+  else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15)
+    marker->process_APPn[marker_code - (int) M_APP0] = routine;
+  else
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code);
+}

jdmaster.c

@@ -1,7 +1,8 @@
 /*
  * jdmaster.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Copyright (C) 2009, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -49,8 +50,14 @@ use_merged_upsample (j_decompress_ptr cinfo)
     return FALSE;
   /* jdmerge.c only supports YCC=>RGB color conversion */
   if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
-      cinfo->out_color_space != JCS_RGB ||
-      cinfo->out_color_components != RGB_PIXELSIZE)
+      (cinfo->out_color_space != JCS_RGB &&
+      cinfo->out_color_space != JCS_EXT_RGB &&
+      cinfo->out_color_space != JCS_EXT_RGBX &&
+      cinfo->out_color_space != JCS_EXT_BGR &&
+      cinfo->out_color_space != JCS_EXT_BGRX &&
+      cinfo->out_color_space != JCS_EXT_XBGR &&
+      cinfo->out_color_space != JCS_EXT_XRGB) ||
+      cinfo->out_color_components != rgb_pixelsize[cinfo->out_color_space])
     return FALSE;
   /* and it only handles 2h1v or 2h2v sampling ratios */
   if (cinfo->comp_info[0].h_samp_factor != 2 ||
@@ -84,8 +91,10 @@ GLOBAL(void)
 jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
 /* Do computations that are needed before master selection phase */
 {
+#ifdef IDCT_SCALING_SUPPORTED
   int ci;
   jpeg_component_info *compptr;
+#endif
 
   /* Prevent application from calling me at wrong times */
   if (cinfo->global_state != DSTATE_READY)
@@ -173,10 +182,14 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
     cinfo->out_color_components = 1;
     break;
   case JCS_RGB:
-#if RGB_PIXELSIZE != 3
-    cinfo->out_color_components = RGB_PIXELSIZE;
+  case JCS_EXT_RGB:
+  case JCS_EXT_RGBX:
+  case JCS_EXT_BGR:
+  case JCS_EXT_BGRX:
+  case JCS_EXT_XBGR:
+  case JCS_EXT_XRGB:
+    cinfo->out_color_components = rgb_pixelsize[cinfo->out_color_space];
     break;
-#endif /* else share code with YCbCr */
   case JCS_YCbCr:
     cinfo->out_color_components = 3;
     break;
@@ -429,7 +442,7 @@ master_selection (j_decompress_ptr cinfo)
  * modules will be active during this pass and give them appropriate
  * start_pass calls.  We also set is_dummy_pass to indicate whether this
  * is a "real" output pass or a dummy pass for color quantization.
- * (In the latter case, jdapi.c will crank the pass to completion.)
+ * (In the latter case, jdapistd.c will crank the pass to completion.)
  */
 
 METHODDEF(void)

jdmerge.c

@@ -2,6 +2,8 @@
  * jdmerge.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2009, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -35,6 +37,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jsimd.h"
 
 #ifdef UPSAMPLE_MERGING_SUPPORTED
 
@@ -255,15 +258,15 @@ h2v1_merged_upsample (j_decompress_ptr cinfo,
     cblue = Cbbtab[cb];
     /* Fetch 2 Y values and emit 2 pixels */
     y  = GETJSAMPLE(*inptr0++);
-    outptr[RGB_RED] =   range_limit[y + cred];
-    outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
-    outptr += RGB_PIXELSIZE;
+    outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr += rgb_pixelsize[cinfo->out_color_space];
     y  = GETJSAMPLE(*inptr0++);
-    outptr[RGB_RED] =   range_limit[y + cred];
-    outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
-    outptr += RGB_PIXELSIZE;
+    outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr += rgb_pixelsize[cinfo->out_color_space];
   }
   /* If image width is odd, do the last output column separately */
   if (cinfo->output_width & 1) {
@@ -273,9 +276,9 @@ h2v1_merged_upsample (j_decompress_ptr cinfo,
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
     cblue = Cbbtab[cb];
     y  = GETJSAMPLE(*inptr0);
-    outptr[RGB_RED] =   range_limit[y + cred];
-    outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
+    outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
   }
 }
 
@@ -319,24 +322,24 @@ h2v2_merged_upsample (j_decompress_ptr cinfo,
     cblue = Cbbtab[cb];
     /* Fetch 4 Y values and emit 4 pixels */
     y  = GETJSAMPLE(*inptr00++);
-    outptr0[RGB_RED] =   range_limit[y + cred];
-    outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr0[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr0[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
     outptr0 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr00++);
-    outptr0[RGB_RED] =   range_limit[y + cred];
-    outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr0[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr0[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
     outptr0 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr01++);
-    outptr1[RGB_RED] =   range_limit[y + cred];
-    outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr1[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr1[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
     outptr1 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr01++);
-    outptr1[RGB_RED] =   range_limit[y + cred];
-    outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr1[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr1[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
     outptr1 += RGB_PIXELSIZE;
   }
   /* If image width is odd, do the last output column separately */
@@ -347,13 +350,13 @@ h2v2_merged_upsample (j_decompress_ptr cinfo,
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
     cblue = Cbbtab[cb];
     y  = GETJSAMPLE(*inptr00);
-    outptr0[RGB_RED] =   range_limit[y + cred];
-    outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr0[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr0[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
     y  = GETJSAMPLE(*inptr01);
-    outptr1[RGB_RED] =   range_limit[y + cred];
-    outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
+    outptr1[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
+    outptr1[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
   }
 }
 
@@ -382,14 +385,20 @@ jinit_merged_upsampler (j_decompress_ptr cinfo)
 
   if (cinfo->max_v_samp_factor == 2) {
     upsample->pub.upsample = merged_2v_upsample;
-    upsample->upmethod = h2v2_merged_upsample;
+    if (jsimd_can_h2v2_merged_upsample())
+      upsample->upmethod = jsimd_h2v2_merged_upsample;
+    else
+      upsample->upmethod = h2v2_merged_upsample;
     /* Allocate a spare row buffer */
     upsample->spare_row = (JSAMPROW)
       (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 		(size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
   } else {
     upsample->pub.upsample = merged_1v_upsample;
-    upsample->upmethod = h2v1_merged_upsample;
+    if (jsimd_can_h2v1_merged_upsample())
+      upsample->upmethod = jsimd_h2v1_merged_upsample;
+    else
+      upsample->upmethod = h2v1_merged_upsample;
     /* No spare row needed */
     upsample->spare_row = NULL;
   }

jdphuff.c

@@ -1,7 +1,7 @@
 /*
  * jdphuff.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -119,6 +119,12 @@ start_pass_phuff_decoder (j_decompress_ptr cinfo)
   }
   if (cinfo->Al > 13)		/* need not check for < 0 */
     bad = TRUE;
+  /* Arguably the maximum Al value should be less than 13 for 8-bit precision,
+   * but the spec doesn't say so, and we try to be liberal about what we
+   * accept.  Note: large Al values could result in out-of-range DC
+   * coefficients during early scans, leading to bizarre displays due to
+   * overflows in the IDCT math.  But we won't crash.
+   */
   if (bad)
     ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
 	     cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
@@ -160,18 +166,12 @@ start_pass_phuff_decoder (j_decompress_ptr cinfo)
     if (is_DC_band) {
       if (cinfo->Ah == 0) {	/* DC refinement needs no table */
 	tbl = compptr->dc_tbl_no;
-	if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-	    cinfo->dc_huff_tbl_ptrs[tbl] == NULL)
-	  ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
-	jpeg_make_d_derived_tbl(cinfo, cinfo->dc_huff_tbl_ptrs[tbl],
+	jpeg_make_d_derived_tbl(cinfo, TRUE, tbl,
 				& entropy->derived_tbls[tbl]);
       }
     } else {
       tbl = compptr->ac_tbl_no;
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS ||
-          cinfo->ac_huff_tbl_ptrs[tbl] == NULL)
-        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
-      jpeg_make_d_derived_tbl(cinfo, cinfo->ac_huff_tbl_ptrs[tbl],
+      jpeg_make_d_derived_tbl(cinfo, FALSE, tbl,
 			      & entropy->derived_tbls[tbl]);
       /* remember the single active table */
       entropy->ac_derived_tbl = entropy->derived_tbls[tbl];
@@ -183,7 +183,7 @@ start_pass_phuff_decoder (j_decompress_ptr cinfo)
   /* Initialize bitread state variables */
   entropy->bitstate.bits_left = 0;
   entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
-  entropy->bitstate.printed_eod = FALSE;
+  entropy->pub.insufficient_data = FALSE;
 
   /* Initialize private state variables */
   entropy->saved.EOBRUN = 0;
@@ -248,8 +248,13 @@ process_restart (j_decompress_ptr cinfo)
   /* Reset restart counter */
   entropy->restarts_to_go = cinfo->restart_interval;
 
-  /* Next segment can get another out-of-data warning */
-  entropy->bitstate.printed_eod = FALSE;
+  /* Reset out-of-data flag, unless read_restart_marker left us smack up
+   * against a marker.  In that case we will end up treating the next data
+   * segment as empty, and we can avoid producing bogus output pixels by
+   * leaving the flag set.
+   */
+  if (cinfo->unread_marker == 0)
+    entropy->pub.insufficient_data = FALSE;
 
   return TRUE;
 }
@@ -297,39 +302,45 @@ decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 	return FALSE;
   }
 
-  /* Load up working state */
-  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-  ASSIGN_STATE(state, entropy->saved);
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
+   */
+  if (! entropy->pub.insufficient_data) {
 
-  /* Outer loop handles each block in the MCU */
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(state, entropy->saved);
 
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-    tbl = entropy->derived_tbls[compptr->dc_tbl_no];
+    /* Outer loop handles each block in the MCU */
 
-    /* Decode a single block's worth of coefficients */
+    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+      block = MCU_data[blkn];
+      ci = cinfo->MCU_membership[blkn];
+      compptr = cinfo->cur_comp_info[ci];
+      tbl = entropy->derived_tbls[compptr->dc_tbl_no];
 
-    /* Section F.2.2.1: decode the DC coefficient difference */
-    HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
-    if (s) {
-      CHECK_BIT_BUFFER(br_state, s, return FALSE);
-      r = GET_BITS(s);
-      s = HUFF_EXTEND(r, s);
+      /* Decode a single block's worth of coefficients */
+
+      /* Section F.2.2.1: decode the DC coefficient difference */
+      HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
+      if (s) {
+	CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	r = GET_BITS(s);
+	s = HUFF_EXTEND(r, s);
+      }
+
+      /* Convert DC difference to actual value, update last_dc_val */
+      s += state.last_dc_val[ci];
+      state.last_dc_val[ci] = s;
+      /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */
+      (*block)[0] = (JCOEF) (s << Al);
     }
 
-    /* Convert DC difference to actual value, update last_dc_val */
-    s += state.last_dc_val[ci];
-    state.last_dc_val[ci] = s;
-    /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */
-    (*block)[0] = (JCOEF) (s << Al);
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    ASSIGN_STATE(entropy->saved, state);
   }
 
-  /* Completed MCU, so update state */
-  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-  ASSIGN_STATE(entropy->saved, state);
-
   /* Account for restart interval (no-op if not using restarts) */
   entropy->restarts_to_go--;
 
@@ -361,53 +372,59 @@ decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 	return FALSE;
   }
 
-  /* Load up working state.
-   * We can avoid loading/saving bitread state if in an EOB run.
+  /* If we've run out of data, just leave the MCU set to zeroes.
+   * This way, we return uniform gray for the remainder of the segment.
    */
-  EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we care about */
+  if (! entropy->pub.insufficient_data) {
 
-  /* There is always only one block per MCU */
+    /* Load up working state.
+     * We can avoid loading/saving bitread state if in an EOB run.
+     */
+    EOBRUN = entropy->saved.EOBRUN;	/* only part of saved state we need */
 
-  if (EOBRUN > 0)		/* if it's a band of zeroes... */
-    EOBRUN--;			/* ...process it now (we do nothing) */
-  else {
-    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-    block = MCU_data[0];
-    tbl = entropy->ac_derived_tbl;
+    /* There is always only one block per MCU */
 
-    for (k = cinfo->Ss; k <= Se; k++) {
-      HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
-      r = s >> 4;
-      s &= 15;
-      if (s) {
-        k += r;
-        CHECK_BIT_BUFFER(br_state, s, return FALSE);
-        r = GET_BITS(s);
-        s = HUFF_EXTEND(r, s);
-	/* Scale and output coefficient in natural (dezigzagged) order */
-        (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al);
-      } else {
-        if (r == 15) {		/* ZRL */
-          k += 15;		/* skip 15 zeroes in band */
-        } else {		/* EOBr, run length is 2^r + appended bits */
-          EOBRUN = 1 << r;
-          if (r) {		/* EOBr, r > 0 */
-	    CHECK_BIT_BUFFER(br_state, r, return FALSE);
-            r = GET_BITS(r);
-            EOBRUN += r;
-          }
-	  EOBRUN--;		/* this band is processed at this moment */
-	  break;		/* force end-of-band */
+    if (EOBRUN > 0)		/* if it's a band of zeroes... */
+      EOBRUN--;			/* ...process it now (we do nothing) */
+    else {
+      BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+      block = MCU_data[0];
+      tbl = entropy->ac_derived_tbl;
+
+      for (k = cinfo->Ss; k <= Se; k++) {
+	HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
+	r = s >> 4;
+	s &= 15;
+	if (s) {
+	  k += r;
+	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
+	  r = GET_BITS(s);
+	  s = HUFF_EXTEND(r, s);
+	  /* Scale and output coefficient in natural (dezigzagged) order */
+	  (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al);
+	} else {
+	  if (r == 15) {	/* ZRL */
+	    k += 15;		/* skip 15 zeroes in band */
+	  } else {		/* EOBr, run length is 2^r + appended bits */
+	    EOBRUN = 1 << r;
+	    if (r) {		/* EOBr, r > 0 */
+	      CHECK_BIT_BUFFER(br_state, r, return FALSE);
+	      r = GET_BITS(r);
+	      EOBRUN += r;
+	    }
+	    EOBRUN--;		/* this band is processed at this moment */
+	    break;		/* force end-of-band */
+	  }
 	}
       }
+
+      BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
     }
 
-    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    /* Completed MCU, so update state */
+    entropy->saved.EOBRUN = EOBRUN;	/* only part of saved state we need */
   }
 
-  /* Completed MCU, so update state */
-  entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we care about */
-
   /* Account for restart interval (no-op if not using restarts) */
   entropy->restarts_to_go--;
 
@@ -437,6 +454,10 @@ decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 	return FALSE;
   }
 
+  /* Not worth the cycles to check insufficient_data here,
+   * since we will not change the data anyway if we read zeroes.
+   */
+
   /* Load up working state */
   BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
 
@@ -489,55 +510,93 @@ decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 	return FALSE;
   }
 
-  /* Load up working state */
-  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-  EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we care about */
-
-  /* There is always only one block per MCU */
-  block = MCU_data[0];
-  tbl = entropy->ac_derived_tbl;
-
-  /* If we are forced to suspend, we must undo the assignments to any newly
-   * nonzero coefficients in the block, because otherwise we'd get confused
-   * next time about which coefficients were already nonzero.
-   * But we need not undo addition of bits to already-nonzero coefficients;
-   * instead, we can test the current bit position to see if we already did it.
+  /* If we've run out of data, don't modify the MCU.
    */
-  num_newnz = 0;
+  if (! entropy->pub.insufficient_data) {
 
-  /* initialize coefficient loop counter to start of band */
-  k = cinfo->Ss;
+    /* Load up working state */
+    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+    EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */
 
-  if (EOBRUN == 0) {
-    for (; k <= Se; k++) {
-      HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
-      r = s >> 4;
-      s &= 15;
-      if (s) {
-	if (s != 1)		/* size of new coef should always be 1 */
-	  WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
-        CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-        if (GET_BITS(1))
-	  s = p1;		/* newly nonzero coef is positive */
-	else
-	  s = m1;		/* newly nonzero coef is negative */
-      } else {
-	if (r != 15) {
-	  EOBRUN = 1 << r;	/* EOBr, run length is 2^r + appended bits */
-	  if (r) {
-	    CHECK_BIT_BUFFER(br_state, r, goto undoit);
-	    r = GET_BITS(r);
-	    EOBRUN += r;
+    /* There is always only one block per MCU */
+    block = MCU_data[0];
+    tbl = entropy->ac_derived_tbl;
+
+    /* If we are forced to suspend, we must undo the assignments to any newly
+     * nonzero coefficients in the block, because otherwise we'd get confused
+     * next time about which coefficients were already nonzero.
+     * But we need not undo addition of bits to already-nonzero coefficients;
+     * instead, we can test the current bit to see if we already did it.
+     */
+    num_newnz = 0;
+
+    /* initialize coefficient loop counter to start of band */
+    k = cinfo->Ss;
+
+    if (EOBRUN == 0) {
+      for (; k <= Se; k++) {
+	HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
+	r = s >> 4;
+	s &= 15;
+	if (s) {
+	  if (s != 1)		/* size of new coef should always be 1 */
+	    WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
+	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
+	  if (GET_BITS(1))
+	    s = p1;		/* newly nonzero coef is positive */
+	  else
+	    s = m1;		/* newly nonzero coef is negative */
+	} else {
+	  if (r != 15) {
+	    EOBRUN = 1 << r;	/* EOBr, run length is 2^r + appended bits */
+	    if (r) {
+	      CHECK_BIT_BUFFER(br_state, r, goto undoit);
+	      r = GET_BITS(r);
+	      EOBRUN += r;
+	    }
+	    break;		/* rest of block is handled by EOB logic */
 	  }
-	  break;		/* rest of block is handled by EOB logic */
+	  /* note s = 0 for processing ZRL */
+	}
+	/* Advance over already-nonzero coefs and r still-zero coefs,
+	 * appending correction bits to the nonzeroes.  A correction bit is 1
+	 * if the absolute value of the coefficient must be increased.
+	 */
+	do {
+	  thiscoef = *block + jpeg_natural_order[k];
+	  if (*thiscoef != 0) {
+	    CHECK_BIT_BUFFER(br_state, 1, goto undoit);
+	    if (GET_BITS(1)) {
+	      if ((*thiscoef & p1) == 0) { /* do nothing if already set it */
+		if (*thiscoef >= 0)
+		  *thiscoef += p1;
+		else
+		  *thiscoef += m1;
+	      }
+	    }
+	  } else {
+	    if (--r < 0)
+	      break;		/* reached target zero coefficient */
+	  }
+	  k++;
+	} while (k <= Se);
+	if (s) {
+	  int pos = jpeg_natural_order[k];
+	  /* Output newly nonzero coefficient */
+	  (*block)[pos] = (JCOEF) s;
+	  /* Remember its position in case we have to suspend */
+	  newnz_pos[num_newnz++] = pos;
 	}
-	/* note s = 0 for processing ZRL */
       }
-      /* Advance over already-nonzero coefs and r still-zero coefs,
-       * appending correction bits to the nonzeroes.  A correction bit is 1
+    }
+
+    if (EOBRUN > 0) {
+      /* Scan any remaining coefficient positions after the end-of-band
+       * (the last newly nonzero coefficient, if any).  Append a correction
+       * bit to each already-nonzero coefficient.  A correction bit is 1
        * if the absolute value of the coefficient must be increased.
        */
-      do {
+      for (; k <= Se; k++) {
 	thiscoef = *block + jpeg_natural_order[k];
 	if (*thiscoef != 0) {
 	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
@@ -549,49 +608,16 @@ decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 		*thiscoef += m1;
 	    }
 	  }
-	} else {
-	  if (--r < 0)
-	    break;		/* reached target zero coefficient */
-	}
-	k++;
-      } while (k <= Se);
-      if (s) {
-	int pos = jpeg_natural_order[k];
-	/* Output newly nonzero coefficient */
-	(*block)[pos] = (JCOEF) s;
-	/* Remember its position in case we have to suspend */
-	newnz_pos[num_newnz++] = pos;
-      }
-    }
-  }
-
-  if (EOBRUN > 0) {
-    /* Scan any remaining coefficient positions after the end-of-band
-     * (the last newly nonzero coefficient, if any).  Append a correction
-     * bit to each already-nonzero coefficient.  A correction bit is 1
-     * if the absolute value of the coefficient must be increased.
-     */
-    for (; k <= Se; k++) {
-      thiscoef = *block + jpeg_natural_order[k];
-      if (*thiscoef != 0) {
-	CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-	if (GET_BITS(1)) {
-	  if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
-	    if (*thiscoef >= 0)
-	      *thiscoef += p1;
-	    else
-	      *thiscoef += m1;
-	  }
 	}
       }
+      /* Count one block completed in EOB run */
+      EOBRUN--;
     }
-    /* Count one block completed in EOB run */
-    EOBRUN--;
-  }
 
-  /* Completed MCU, so update state */
-  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-  entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we care about */
+    /* Completed MCU, so update state */
+    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
+    entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
+  }
 
   /* Account for restart interval (no-op if not using restarts) */
   entropy->restarts_to_go--;

jdsample.c

@@ -2,6 +2,7 @@
  * jdsample.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -21,6 +22,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jsimd.h"
 
 
 /* Pointer to routine to upsample a single component */
@@ -447,18 +449,32 @@ jinit_upsampler (j_decompress_ptr cinfo)
     } else if (h_in_group * 2 == h_out_group &&
 	       v_in_group == v_out_group) {
       /* Special cases for 2h1v upsampling */
-      if (do_fancy && compptr->downsampled_width > 2)
-	upsample->methods[ci] = h2v1_fancy_upsample;
-      else
-	upsample->methods[ci] = h2v1_upsample;
+      if (do_fancy && compptr->downsampled_width > 2) {
+	if (jsimd_can_h2v1_fancy_upsample())
+	  upsample->methods[ci] = jsimd_h2v1_fancy_upsample;
+	else
+	  upsample->methods[ci] = h2v1_fancy_upsample;
+      } else {
+	if (jsimd_can_h2v1_upsample())
+	  upsample->methods[ci] = jsimd_h2v1_upsample;
+	else
+	  upsample->methods[ci] = h2v1_upsample;
+      }
     } else if (h_in_group * 2 == h_out_group &&
 	       v_in_group * 2 == v_out_group) {
       /* Special cases for 2h2v upsampling */
       if (do_fancy && compptr->downsampled_width > 2) {
-	upsample->methods[ci] = h2v2_fancy_upsample;
+	if (jsimd_can_h2v2_fancy_upsample())
+	  upsample->methods[ci] = jsimd_h2v2_fancy_upsample;
+	else
+	  upsample->methods[ci] = h2v2_fancy_upsample;
 	upsample->pub.need_context_rows = TRUE;
-      } else
-	upsample->methods[ci] = h2v2_upsample;
+      } else {
+	if (jsimd_can_h2v2_upsample())
+	  upsample->methods[ci] = jsimd_h2v2_upsample;
+	else
+	  upsample->methods[ci] = h2v2_upsample;
+      }
     } else if ((h_out_group % h_in_group) == 0 &&
 	       (v_out_group % v_in_group) == 0) {
       /* Generic integral-factors upsampling method */

jdtrans.c

@@ -1,7 +1,7 @@
 /*
  * jdtrans.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -30,6 +30,13 @@ LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo));
  * To release the memory occupied by the virtual arrays, call
  * jpeg_finish_decompress() when done with the data.
  *
+ * An alternative usage is to simply obtain access to the coefficient arrays
+ * during a buffered-image-mode decompression operation.  This is allowed
+ * after any jpeg_finish_output() call.  The arrays can be accessed until
+ * jpeg_finish_decompress() is called.  (Note that any call to the library
+ * may reposition the arrays, so don't rely on access_virt_barray() results
+ * to stay valid across library calls.)
+ *
  * Returns NULL if suspended.  This case need be checked only if
  * a suspending data source is used.
  */
@@ -41,32 +48,43 @@ jpeg_read_coefficients (j_decompress_ptr cinfo)
     /* First call: initialize active modules */
     transdecode_master_selection(cinfo);
     cinfo->global_state = DSTATE_RDCOEFS;
-  } else if (cinfo->global_state != DSTATE_RDCOEFS)
-    ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
-  /* Absorb whole file into the coef buffer */
-  for (;;) {
-    int retcode;
-    /* Call progress monitor hook if present */
-    if (cinfo->progress != NULL)
-      (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
-    /* Absorb some more input */
-    retcode = (*cinfo->inputctl->consume_input) (cinfo);
-    if (retcode == JPEG_SUSPENDED)
-      return NULL;
-    if (retcode == JPEG_REACHED_EOI)
-      break;
-    /* Advance progress counter if appropriate */
-    if (cinfo->progress != NULL &&
-	(retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
-      if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
-	/* startup underestimated number of scans; ratchet up one scan */
-	cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
+  }
+  if (cinfo->global_state == DSTATE_RDCOEFS) {
+    /* Absorb whole file into the coef buffer */
+    for (;;) {
+      int retcode;
+      /* Call progress monitor hook if present */
+      if (cinfo->progress != NULL)
+	(*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo);
+      /* Absorb some more input */
+      retcode = (*cinfo->inputctl->consume_input) (cinfo);
+      if (retcode == JPEG_SUSPENDED)
+	return NULL;
+      if (retcode == JPEG_REACHED_EOI)
+	break;
+      /* Advance progress counter if appropriate */
+      if (cinfo->progress != NULL &&
+	  (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) {
+	if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) {
+	  /* startup underestimated number of scans; ratchet up one scan */
+	  cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows;
+	}
       }
     }
+    /* Set state so that jpeg_finish_decompress does the right thing */
+    cinfo->global_state = DSTATE_STOPPING;
   }
-  /* Set state so that jpeg_finish_decompress does the right thing */
-  cinfo->global_state = DSTATE_STOPPING;
-  return cinfo->coef->coef_arrays;
+  /* At this point we should be in state DSTATE_STOPPING if being used
+   * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access
+   * to the coefficients during a full buffered-image-mode decompression.
+   */
+  if ((cinfo->global_state == DSTATE_STOPPING ||
+       cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) {
+    return cinfo->coef->coef_arrays;
+  }
+  /* Oops, improper usage */
+  ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
+  return NULL;			/* keep compiler happy */
 }
 
 
@@ -78,6 +96,9 @@ jpeg_read_coefficients (j_decompress_ptr cinfo)
 LOCAL(void)
 transdecode_master_selection (j_decompress_ptr cinfo)
 {
+  /* This is effectively a buffered-image operation. */
+  cinfo->buffered_image = TRUE;
+
   /* Entropy decoding: either Huffman or arithmetic coding. */
   if (cinfo->arith_code) {
     ERREXIT(cinfo, JERR_ARITH_NOTIMPL);

jerror.c

@@ -1,7 +1,7 @@
 /*
  * jerror.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -10,6 +10,11 @@
  * stderr is the right thing to do.  Many applications will want to replace
  * some or all of these routines.
  *
+ * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile,
+ * you get a Windows-specific hack to display error messages in a dialog box.
+ * It ain't much, but it beats dropping error messages into the bit bucket,
+ * which is what happens to output to stderr under most Windows C compilers.
+ *
  * These routines are used by both the compression and decompression code.
  */
 
@@ -19,6 +24,10 @@
 #include "jversion.h"
 #include "jerror.h"
 
+#ifdef USE_WINDOWS_MESSAGEBOX
+#include <windows.h>
+#endif
+
 #ifndef EXIT_FAILURE		/* define exit() codes if not provided */
 #define EXIT_FAILURE  1
 #endif
@@ -74,6 +83,15 @@ error_exit (j_common_ptr cinfo)
  * Actual output of an error or trace message.
  * Applications may override this method to send JPEG messages somewhere
  * other than stderr.
+ *
+ * On Windows, printing to stderr is generally completely useless,
+ * so we provide optional code to produce an error-dialog popup.
+ * Most Windows applications will still prefer to override this routine,
+ * but if they don't, it'll do something at least marginally useful.
+ *
+ * NOTE: to use the library in an environment that doesn't support the
+ * C stdio library, you may have to delete the call to fprintf() entirely,
+ * not just not use this routine.
  */
 
 METHODDEF(void)
@@ -84,8 +102,14 @@ output_message (j_common_ptr cinfo)
   /* Create the message */
   (*cinfo->err->format_message) (cinfo, buffer);
 
+#ifdef USE_WINDOWS_MESSAGEBOX
+  /* Display it in a message dialog box */
+  MessageBox(GetActiveWindow(), buffer, "JPEG Library Error",
+	     MB_OK | MB_ICONERROR);
+#else
   /* Send it to stderr, adding a newline */
   fprintf(stderr, "%s\n", buffer);
+#endif
 }
 
 

jerror.h

@@ -1,7 +1,7 @@
 /*
  * jerror.h
  *
- * Copyright (C) 1994-1995, Thomas G. Lane.
+ * Copyright (C) 1994-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -45,7 +45,9 @@ JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix")
 JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
 JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
 JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
+JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
 JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported")
+JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
 JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace")
 JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace")
 JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length")
@@ -71,7 +73,6 @@ JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d")
 JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request")
 JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d")
 JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x")
-JMESSAGE(JERR_DHT_COUNTS, "Bogus DHT counts")
 JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d")
 JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d")
 JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)")
@@ -134,12 +135,13 @@ JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u")
 JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u")
 JMESSAGE(JTRC_EOI, "End Of Image")
 JMESSAGE(JTRC_HUFFBITS, "        %3d %3d %3d %3d %3d %3d %3d %3d")
-JMESSAGE(JTRC_JFIF, "JFIF APP0 marker, density %dx%d  %d")
+JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d  %d")
 JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE,
 	 "Warning: thumbnail image size does not match data length %u")
-JMESSAGE(JTRC_JFIF_MINOR, "Unknown JFIF minor revision number %d.%02d")
+JMESSAGE(JTRC_JFIF_EXTENSION,
+	 "JFIF extension marker: type 0x%02x, length %u")
 JMESSAGE(JTRC_JFIF_THUMBNAIL, "    with %d x %d thumbnail image")
-JMESSAGE(JTRC_MISC_MARKER, "Skipping marker 0x%02x, length %u")
+JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u")
 JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x")
 JMESSAGE(JTRC_QUANTVALS, "        %4u %4u %4u %4u %4u %4u %4u %4u")
 JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors")
@@ -157,6 +159,12 @@ JMESSAGE(JTRC_SOS_COMPONENT, "    Component %d: dc=%d ac=%d")
 JMESSAGE(JTRC_SOS_PARAMS, "  Ss=%d, Se=%d, Ah=%d, Al=%d")
 JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s")
 JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s")
+JMESSAGE(JTRC_THUMB_JPEG,
+	 "JFIF extension marker: JPEG-compressed thumbnail image, length %u")
+JMESSAGE(JTRC_THUMB_PALETTE,
+	 "JFIF extension marker: palette thumbnail image, length %u")
+JMESSAGE(JTRC_THUMB_RGB,
+	 "JFIF extension marker: RGB thumbnail image, length %u")
 JMESSAGE(JTRC_UNKNOWN_IDS,
 	 "Unrecognized component IDs %d %d %d, assuming YCbCr")
 JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u")
@@ -263,6 +271,12 @@ JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines")
 	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
 	   (cinfo)->err->msg_code = (code); \
 	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
+#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5)  \
+  MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
+	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \
+	   _mp[4] = (p5); \
+	   (cinfo)->err->msg_code = (code); \
+	   (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); )
 #define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8)  \
   MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \
 	   _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \

jidctflt.c

@@ -1,7 +1,7 @@
 /*
  * jidctflt.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -96,9 +96,10 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * column DCT calculations can be simplified this way.
      */
     
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] |
-	 inptr[DCTSIZE*7]) == 0) {
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero */
       FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
       

jidctfst.c

@@ -1,7 +1,7 @@
 /*
  * jidctfst.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -197,9 +197,10 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * column DCT calculations can be simplified this way.
      */
     
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] |
-	 inptr[DCTSIZE*7]) == 0) {
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero */
       int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
 
@@ -289,8 +290,8 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      */
     
 #ifndef NO_ZERO_ROW_TEST
-    if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[4] | wsptr[5] | wsptr[6] |
-	 wsptr[7]) == 0) {
+    if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
+	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
       /* AC terms all zero */
       JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3)
 				  & RANGE_MASK];

jidctint.c

@@ -1,7 +1,7 @@
 /*
  * jidctint.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -178,9 +178,10 @@ jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * column DCT calculations can be simplified this way.
      */
     
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*4] | inptr[DCTSIZE*5] | inptr[DCTSIZE*6] |
-	 inptr[DCTSIZE*7]) == 0) {
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
+	inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero */
       int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
       
@@ -284,8 +285,8 @@ jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      */
     
 #ifndef NO_ZERO_ROW_TEST
-    if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[4] | wsptr[5] | wsptr[6] |
-	 wsptr[7]) == 0) {
+    if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
+	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
       /* AC terms all zero */
       JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
 				  & RANGE_MASK];

jidctred.c

@@ -1,7 +1,7 @@
 /*
  * jidctred.c
  *
- * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 1994-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -139,8 +139,9 @@ jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     /* Don't bother to process column 4, because second pass won't use it */
     if (ctr == DCTSIZE-4)
       continue;
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*2] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*5] | inptr[DCTSIZE*6] | inptr[DCTSIZE*7]) == 0) {
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
+	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*5] == 0 &&
+	inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero; we need not examine term 4 for 4x4 output */
       int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
       
@@ -198,8 +199,8 @@ jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     /* It's not clear whether a zero row test is worthwhile here ... */
 
 #ifndef NO_ZERO_ROW_TEST
-    if ((wsptr[1] | wsptr[2] | wsptr[3] | wsptr[5] | wsptr[6] |
-	 wsptr[7]) == 0) {
+    if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 &&
+	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
       /* AC terms all zero */
       JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
 				  & RANGE_MASK];
@@ -290,8 +291,8 @@ jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     /* Don't bother to process columns 2,4,6 */
     if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6)
       continue;
-    if ((inptr[DCTSIZE*1] | inptr[DCTSIZE*3] |
-	 inptr[DCTSIZE*5] | inptr[DCTSIZE*7]) == 0) {
+    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*3] == 0 &&
+	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */
       int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
       
@@ -331,7 +332,7 @@ jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     /* It's not clear whether a zero row test is worthwhile here ... */
 
 #ifndef NO_ZERO_ROW_TEST
-    if ((wsptr[1] | wsptr[3] | wsptr[5] | wsptr[7]) == 0) {
+    if (wsptr[1] == 0 && wsptr[3] == 0 && wsptr[5] == 0 && wsptr[7] == 0) {
       /* AC terms all zero */
       JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
 				  & RANGE_MASK];

jmemansi.c

@@ -1,167 +0,0 @@
-/*
- * jmemansi.c
- *
- * Copyright (C) 1992-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides a simple generic implementation of the system-
- * dependent portion of the JPEG memory manager.  This implementation
- * assumes that you have the ANSI-standard library routine tmpfile().
- * Also, the problem of determining the amount of memory available
- * is shoved onto the user.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h"		/* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-#endif
-
-#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
-#define SEEK_SET  0		/* if not, assume 0 is correct */
-#endif
-
-
-/*
- * Memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
-  free(object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: although we include FAR keywords in the routine declarations,
- * this file won't actually work in 80x86 small/medium model; at least,
- * you probably won't be able to process useful-size images in only 64KB.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void FAR *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
-  free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
-#define DEFAULT_MAX_MEM		1000000L /* default: one megabyte */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
-		    long max_bytes_needed, long already_allocated)
-{
-  return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed.  You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-		    void FAR * buffer_address,
-		    long file_offset, long byte_count)
-{
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFREAD(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
-    ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-		     void FAR * buffer_address,
-		     long file_offset, long byte_count)
-{
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFWRITE(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
-    ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
-  fclose(info->temp_file);
-  /* Since this implementation uses tmpfile() to create the file,
-   * no explicit file deletion is needed.
-   */
-}
-
-
-/*
- * Initial opening of a backing-store object.
- *
- * This version uses tmpfile(), which constructs a suitable file name
- * behind the scenes.  We don't have to use info->temp_name[] at all;
- * indeed, we can't even find out the actual name of the temp file.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-			 long total_bytes_needed)
-{
-  if ((info->temp_file = tmpfile()) == NULL)
-    ERREXITS(cinfo, JERR_TFILE_CREATE, "");
-  info->read_backing_store = read_backing_store;
-  info->write_backing_store = write_backing_store;
-  info->close_backing_store = close_backing_store;
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
-  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
-  /* no work */
-}

jmemdos.c

@@ -1,634 +0,0 @@
-/*
- * jmemdos.c
- *
- * Copyright (C) 1992-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides an MS-DOS-compatible implementation of the system-
- * dependent portion of the JPEG memory manager.  Temporary data can be
- * stored in extended or expanded memory as well as in regular DOS files.
- *
- * If you use this file, you must be sure that NEED_FAR_POINTERS is defined
- * if you compile in a small-data memory model; it should NOT be defined if
- * you use a large-data memory model.  This file is not recommended if you
- * are using a flat-memory-space 386 environment such as DJGCC or Watcom C.
- * Also, this code will NOT work if struct fields are aligned on greater than
- * 2-byte boundaries.
- *
- * Based on code contributed by Ge' Weijers.
- */
-
-/*
- * If you have both extended and expanded memory, you may want to change the
- * order in which they are tried in jopen_backing_store.  On a 286 machine
- * expanded memory is usually faster, since extended memory access involves
- * an expensive protected-mode-and-back switch.  On 386 and better, extended
- * memory is usually faster.  As distributed, the code tries extended memory
- * first (what? not everyone has a 386? :-).
- *
- * You can disable use of extended/expanded memory entirely by altering these
- * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0).
- */
-
-#ifndef XMS_SUPPORTED
-#define XMS_SUPPORTED  1
-#endif
-#ifndef EMS_SUPPORTED
-#define EMS_SUPPORTED  1
-#endif
-
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h"		/* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare these */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-extern char * getenv JPP((const char * name));
-#endif
-
-#ifdef NEED_FAR_POINTERS
-
-#ifdef __TURBOC__
-/* These definitions work for Borland C (Turbo C) */
-#include <alloc.h>		/* need farmalloc(), farfree() */
-#define far_malloc(x)	farmalloc(x)
-#define far_free(x)	farfree(x)
-#else
-/* These definitions work for Microsoft C and compatible compilers */
-#include <malloc.h>		/* need _fmalloc(), _ffree() */
-#define far_malloc(x)	_fmalloc(x)
-#define far_free(x)	_ffree(x)
-#endif
-
-#else /* not NEED_FAR_POINTERS */
-
-#define far_malloc(x)	malloc(x)
-#define far_free(x)	free(x)
-
-#endif /* NEED_FAR_POINTERS */
-
-#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
-#define READ_BINARY	"r"
-#else
-#define READ_BINARY	"rb"
-#endif
-
-#if MAX_ALLOC_CHUNK >= 65535L	/* make sure jconfig.h got this right */
-  MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */
-#endif
-
-
-/*
- * Declarations for assembly-language support routines (see jmemdosa.asm).
- *
- * The functions are declared "far" as are all their pointer arguments;
- * this ensures the assembly source code will work regardless of the
- * compiler memory model.  We assume "short" is 16 bits, "long" is 32.
- */
-
-typedef void far * XMSDRIVER;	/* actually a pointer to code */
-typedef struct {		/* registers for calling XMS driver */
-	unsigned short ax, dx, bx;
-	void far * ds_si;
-      } XMScontext;
-typedef struct {		/* registers for calling EMS driver */
-	unsigned short ax, dx, bx;
-	void far * ds_si;
-      } EMScontext;
-
-extern short far jdos_open JPP((short far * handle, char far * filename));
-extern short far jdos_close JPP((short handle));
-extern short far jdos_seek JPP((short handle, long offset));
-extern short far jdos_read JPP((short handle, void far * buffer,
-				unsigned short count));
-extern short far jdos_write JPP((short handle, void far * buffer,
-				 unsigned short count));
-extern void far jxms_getdriver JPP((XMSDRIVER far *));
-extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *));
-extern short far jems_available JPP((void));
-extern void far jems_calldriver JPP((EMScontext far *));
-
-
-/*
- * Selection of a file name for a temporary file.
- * This is highly system-dependent, and you may want to customize it.
- */
-
-static int next_file_num;	/* to distinguish among several temp files */
-
-LOCAL(void)
-select_file_name (char * fname)
-{
-  const char * env;
-  char * ptr;
-  FILE * tfile;
-
-  /* Keep generating file names till we find one that's not in use */
-  for (;;) {
-    /* Get temp directory name from environment TMP or TEMP variable;
-     * if none, use "."
-     */
-    if ((env = (const char *) getenv("TMP")) == NULL)
-      if ((env = (const char *) getenv("TEMP")) == NULL)
-	env = ".";
-    if (*env == '\0')		/* null string means "." */
-      env = ".";
-    ptr = fname;		/* copy name to fname */
-    while (*env != '\0')
-      *ptr++ = *env++;
-    if (ptr[-1] != '\\' && ptr[-1] != '/')
-      *ptr++ = '\\';		/* append backslash if not in env variable */
-    /* Append a suitable file name */
-    next_file_num++;		/* advance counter */
-    sprintf(ptr, "JPG%03d.TMP", next_file_num);
-    /* Probe to see if file name is already in use */
-    if ((tfile = fopen(fname, READ_BINARY)) == NULL)
-      break;
-    fclose(tfile);		/* oops, it's there; close tfile & try again */
-  }
-}
-
-
-/*
- * Near-memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
-  free(object);
-}
-
-
-/*
- * "Large" objects are allocated in far memory, if possible
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void FAR *) far_malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
-  far_free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
-#define DEFAULT_MAX_MEM		300000L /* for total usage about 450K */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
-		    long max_bytes_needed, long already_allocated)
-{
-  return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed.  You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-/*
- * For MS-DOS we support three types of backing storage:
- *   1. Conventional DOS files.  We access these by direct DOS calls rather
- *      than via the stdio package.  This provides a bit better performance,
- *      but the real reason is that the buffers to be read or written are FAR.
- *      The stdio library for small-data memory models can't cope with that.
- *   2. Extended memory, accessed per the XMS V2.0 specification.
- *   3. Expanded memory, accessed per the LIM/EMS 4.0 specification.
- * You'll need copies of those specs to make sense of the related code.
- * The specs are available by Internet FTP from the SIMTEL archives 
- * (oak.oakland.edu and its various mirror sites).  See files
- * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip.
- */
-
-
-/*
- * Access methods for a DOS file.
- */
-
-
-METHODDEF(void)
-read_file_store (j_common_ptr cinfo, backing_store_ptr info,
-		 void FAR * buffer_address,
-		 long file_offset, long byte_count)
-{
-  if (jdos_seek(info->handle.file_handle, file_offset))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
-  if (byte_count > 65535L)	/* safety check */
-    ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
-  if (jdos_read(info->handle.file_handle, buffer_address,
-		(unsigned short) byte_count))
-    ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_file_store (j_common_ptr cinfo, backing_store_ptr info,
-		  void FAR * buffer_address,
-		  long file_offset, long byte_count)
-{
-  if (jdos_seek(info->handle.file_handle, file_offset))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
-  if (byte_count > 65535L)	/* safety check */
-    ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
-  if (jdos_write(info->handle.file_handle, buffer_address,
-		 (unsigned short) byte_count))
-    ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_file_store (j_common_ptr cinfo, backing_store_ptr info)
-{
-  jdos_close(info->handle.file_handle);	/* close the file */
-  remove(info->temp_name);	/* delete the file */
-/* If your system doesn't have remove(), try unlink() instead.
- * remove() is the ANSI-standard name for this function, but
- * unlink() was more common in pre-ANSI systems.
- */
-  TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
-}
-
-
-LOCAL(boolean)
-open_file_store (j_common_ptr cinfo, backing_store_ptr info,
-		 long total_bytes_needed)
-{
-  short handle;
-
-  select_file_name(info->temp_name);
-  if (jdos_open((short far *) & handle, (char far *) info->temp_name)) {
-    /* might as well exit since jpeg_open_backing_store will fail anyway */
-    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
-    return FALSE;
-  }
-  info->handle.file_handle = handle;
-  info->read_backing_store = read_file_store;
-  info->write_backing_store = write_file_store;
-  info->close_backing_store = close_file_store;
-  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
-  return TRUE;			/* succeeded */
-}
-
-
-/*
- * Access methods for extended memory.
- */
-
-#if XMS_SUPPORTED
-
-static XMSDRIVER xms_driver;	/* saved address of XMS driver */
-
-typedef union {			/* either long offset or real-mode pointer */
-	long offset;
-	void far * ptr;
-      } XMSPTR;
-
-typedef struct {		/* XMS move specification structure */
-	long length;
-	XMSH src_handle;
-	XMSPTR src;
-	XMSH dst_handle;
-	XMSPTR dst;
-      } XMSspec;
-
-#define ODD(X)	(((X) & 1L) != 0)
-
-
-METHODDEF(void)
-read_xms_store (j_common_ptr cinfo, backing_store_ptr info,
-		void FAR * buffer_address,
-		long file_offset, long byte_count)
-{
-  XMScontext ctx;
-  XMSspec spec;
-  char endbuffer[2];
-
-  /* The XMS driver can't cope with an odd length, so handle the last byte
-   * specially if byte_count is odd.  We don't expect this to be common.
-   */
-
-  spec.length = byte_count & (~ 1L);
-  spec.src_handle = info->handle.xms_handle;
-  spec.src.offset = file_offset;
-  spec.dst_handle = 0;
-  spec.dst.ptr = buffer_address;
-  
-  ctx.ds_si = (void far *) & spec;
-  ctx.ax = 0x0b00;		/* EMB move */
-  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
-  if (ctx.ax != 1)
-    ERREXIT(cinfo, JERR_XMS_READ);
-
-  if (ODD(byte_count)) {
-    read_xms_store(cinfo, info, (void FAR *) endbuffer,
-		   file_offset + byte_count - 1L, 2L);
-    ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0];
-  }
-}
-
-
-METHODDEF(void)
-write_xms_store (j_common_ptr cinfo, backing_store_ptr info,
-		 void FAR * buffer_address,
-		 long file_offset, long byte_count)
-{
-  XMScontext ctx;
-  XMSspec spec;
-  char endbuffer[2];
-
-  /* The XMS driver can't cope with an odd length, so handle the last byte
-   * specially if byte_count is odd.  We don't expect this to be common.
-   */
-
-  spec.length = byte_count & (~ 1L);
-  spec.src_handle = 0;
-  spec.src.ptr = buffer_address;
-  spec.dst_handle = info->handle.xms_handle;
-  spec.dst.offset = file_offset;
-
-  ctx.ds_si = (void far *) & spec;
-  ctx.ax = 0x0b00;		/* EMB move */
-  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
-  if (ctx.ax != 1)
-    ERREXIT(cinfo, JERR_XMS_WRITE);
-
-  if (ODD(byte_count)) {
-    read_xms_store(cinfo, info, (void FAR *) endbuffer,
-		   file_offset + byte_count - 1L, 2L);
-    endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L];
-    write_xms_store(cinfo, info, (void FAR *) endbuffer,
-		    file_offset + byte_count - 1L, 2L);
-  }
-}
-
-
-METHODDEF(void)
-close_xms_store (j_common_ptr cinfo, backing_store_ptr info)
-{
-  XMScontext ctx;
-
-  ctx.dx = info->handle.xms_handle;
-  ctx.ax = 0x0a00;
-  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
-  TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle);
-  /* we ignore any error return from the driver */
-}
-
-
-LOCAL(boolean)
-open_xms_store (j_common_ptr cinfo, backing_store_ptr info,
-		long total_bytes_needed)
-{
-  XMScontext ctx;
-
-  /* Get address of XMS driver */
-  jxms_getdriver((XMSDRIVER far *) & xms_driver);
-  if (xms_driver == NULL)
-    return FALSE;		/* no driver to be had */
-
-  /* Get version number, must be >= 2.00 */
-  ctx.ax = 0x0000;
-  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
-  if (ctx.ax < (unsigned short) 0x0200)
-    return FALSE;
-
-  /* Try to get space (expressed in kilobytes) */
-  ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10);
-  ctx.ax = 0x0900;
-  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
-  if (ctx.ax != 1)
-    return FALSE;
-
-  /* Succeeded, save the handle and away we go */
-  info->handle.xms_handle = ctx.dx;
-  info->read_backing_store = read_xms_store;
-  info->write_backing_store = write_xms_store;
-  info->close_backing_store = close_xms_store;
-  TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx);
-  return TRUE;			/* succeeded */
-}
-
-#endif /* XMS_SUPPORTED */
-
-
-/*
- * Access methods for expanded memory.
- */
-
-#if EMS_SUPPORTED
-
-/* The EMS move specification structure requires word and long fields aligned
- * at odd byte boundaries.  Some compilers will align struct fields at even
- * byte boundaries.  While it's usually possible to force byte alignment,
- * that causes an overall performance penalty and may pose problems in merging
- * JPEG into a larger application.  Instead we accept some rather dirty code
- * here.  Note this code would fail if the hardware did not allow odd-byte
- * word & long accesses, but all 80x86 CPUs do.
- */
-
-typedef void far * EMSPTR;
-
-typedef union {			/* EMS move specification structure */
-	long length;		/* It's easy to access first 4 bytes */
-	char bytes[18];		/* Misaligned fields in here! */
-      } EMSspec;
-
-/* Macros for accessing misaligned fields */
-#define FIELD_AT(spec,offset,type)  (*((type *) &(spec.bytes[offset])))
-#define SRC_TYPE(spec)		FIELD_AT(spec,4,char)
-#define SRC_HANDLE(spec)	FIELD_AT(spec,5,EMSH)
-#define SRC_OFFSET(spec)	FIELD_AT(spec,7,unsigned short)
-#define SRC_PAGE(spec)		FIELD_AT(spec,9,unsigned short)
-#define SRC_PTR(spec)		FIELD_AT(spec,7,EMSPTR)
-#define DST_TYPE(spec)		FIELD_AT(spec,11,char)
-#define DST_HANDLE(spec)	FIELD_AT(spec,12,EMSH)
-#define DST_OFFSET(spec)	FIELD_AT(spec,14,unsigned short)
-#define DST_PAGE(spec)		FIELD_AT(spec,16,unsigned short)
-#define DST_PTR(spec)		FIELD_AT(spec,14,EMSPTR)
-
-#define EMSPAGESIZE	16384L	/* gospel, see the EMS specs */
-
-#define HIBYTE(W)  (((W) >> 8) & 0xFF)
-#define LOBYTE(W)  ((W) & 0xFF)
-
-
-METHODDEF(void)
-read_ems_store (j_common_ptr cinfo, backing_store_ptr info,
-		void FAR * buffer_address,
-		long file_offset, long byte_count)
-{
-  EMScontext ctx;
-  EMSspec spec;
-
-  spec.length = byte_count;
-  SRC_TYPE(spec) = 1;
-  SRC_HANDLE(spec) = info->handle.ems_handle;
-  SRC_PAGE(spec)   = (unsigned short) (file_offset / EMSPAGESIZE);
-  SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
-  DST_TYPE(spec) = 0;
-  DST_HANDLE(spec) = 0;
-  DST_PTR(spec)    = buffer_address;
-  
-  ctx.ds_si = (void far *) & spec;
-  ctx.ax = 0x5700;		/* move memory region */
-  jems_calldriver((EMScontext far *) & ctx);
-  if (HIBYTE(ctx.ax) != 0)
-    ERREXIT(cinfo, JERR_EMS_READ);
-}
-
-
-METHODDEF(void)
-write_ems_store (j_common_ptr cinfo, backing_store_ptr info,
-		 void FAR * buffer_address,
-		 long file_offset, long byte_count)
-{
-  EMScontext ctx;
-  EMSspec spec;
-
-  spec.length = byte_count;
-  SRC_TYPE(spec) = 0;
-  SRC_HANDLE(spec) = 0;
-  SRC_PTR(spec)    = buffer_address;
-  DST_TYPE(spec) = 1;
-  DST_HANDLE(spec) = info->handle.ems_handle;
-  DST_PAGE(spec)   = (unsigned short) (file_offset / EMSPAGESIZE);
-  DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
-  
-  ctx.ds_si = (void far *) & spec;
-  ctx.ax = 0x5700;		/* move memory region */
-  jems_calldriver((EMScontext far *) & ctx);
-  if (HIBYTE(ctx.ax) != 0)
-    ERREXIT(cinfo, JERR_EMS_WRITE);
-}
-
-
-METHODDEF(void)
-close_ems_store (j_common_ptr cinfo, backing_store_ptr info)
-{
-  EMScontext ctx;
-
-  ctx.ax = 0x4500;
-  ctx.dx = info->handle.ems_handle;
-  jems_calldriver((EMScontext far *) & ctx);
-  TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle);
-  /* we ignore any error return from the driver */
-}
-
-
-LOCAL(boolean)
-open_ems_store (j_common_ptr cinfo, backing_store_ptr info,
-		long total_bytes_needed)
-{
-  EMScontext ctx;
-
-  /* Is EMS driver there? */
-  if (! jems_available())
-    return FALSE;
-
-  /* Get status, make sure EMS is OK */
-  ctx.ax = 0x4000;
-  jems_calldriver((EMScontext far *) & ctx);
-  if (HIBYTE(ctx.ax) != 0)
-    return FALSE;
-
-  /* Get version, must be >= 4.0 */
-  ctx.ax = 0x4600;
-  jems_calldriver((EMScontext far *) & ctx);
-  if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40)
-    return FALSE;
-
-  /* Try to allocate requested space */
-  ctx.ax = 0x4300;
-  ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE);
-  jems_calldriver((EMScontext far *) & ctx);
-  if (HIBYTE(ctx.ax) != 0)
-    return FALSE;
-
-  /* Succeeded, save the handle and away we go */
-  info->handle.ems_handle = ctx.dx;
-  info->read_backing_store = read_ems_store;
-  info->write_backing_store = write_ems_store;
-  info->close_backing_store = close_ems_store;
-  TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx);
-  return TRUE;			/* succeeded */
-}
-
-#endif /* EMS_SUPPORTED */
-
-
-/*
- * Initial opening of a backing-store object.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-			 long total_bytes_needed)
-{
-  /* Try extended memory, then expanded memory, then regular file. */
-#if XMS_SUPPORTED
-  if (open_xms_store(cinfo, info, total_bytes_needed))
-    return;
-#endif
-#if EMS_SUPPORTED
-  if (open_ems_store(cinfo, info, total_bytes_needed))
-    return;
-#endif
-  if (open_file_store(cinfo, info, total_bytes_needed))
-    return;
-  ERREXITS(cinfo, JERR_TFILE_CREATE, "");
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
-  next_file_num = 0;		/* initialize temp file name generator */
-  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
-  /* Microsoft C, at least in v6.00A, will not successfully reclaim freed
-   * blocks of size > 32Kbytes unless we give it a kick in the rear, like so:
-   */
-#ifdef NEED_FHEAPMIN
-  _fheapmin();
-#endif
-}

jmemdosa.asm

@@ -1,379 +0,0 @@
-;
-; jmemdosa.asm
-;
-; Copyright (C) 1992, Thomas G. Lane.
-; This file is part of the Independent JPEG Group's software.
-; For conditions of distribution and use, see the accompanying README file.
-;
-; This file contains low-level interface routines to support the MS-DOS
-; backing store manager (jmemdos.c).  Routines are provided to access disk
-; files through direct DOS calls, and to access XMS and EMS drivers.
-;
-; This file should assemble with Microsoft's MASM or any compatible
-; assembler (including Borland's Turbo Assembler).  If you haven't got
-; a compatible assembler, better fall back to jmemansi.c or jmemname.c.
-;
-; To minimize dependence on the C compiler's register usage conventions,
-; we save and restore all 8086 registers, even though most compilers only
-; require SI,DI,DS to be preserved.  Also, we use only 16-bit-wide return
-; values, which everybody returns in AX.
-;
-; Based on code contributed by Ge' Weijers.
-;
-
-JMEMDOSA_TXT	segment byte public 'CODE'
-
-		assume	cs:JMEMDOSA_TXT
-
-		public	_jdos_open
-		public	_jdos_close
-		public	_jdos_seek
-		public	_jdos_read
-		public	_jdos_write
-		public	_jxms_getdriver
-		public	_jxms_calldriver
-		public	_jems_available
-		public	_jems_calldriver
-
-;
-; short far jdos_open (short far * handle, char far * filename)
-;
-; Create and open a temporary file
-;
-_jdos_open	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	cx,0			; normal file attributes
-		lds	dx,dword ptr [bp+10]	; get filename pointer
-		mov	ah,3ch			; create file
-		int	21h
-		jc	open_err		; if failed, return error code
-		lds	bx,dword ptr [bp+6]	; get handle pointer
-		mov	word ptr [bx],ax	; save the handle
-		xor	ax,ax			; return zero for OK
-open_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_open	endp
-
-
-;
-; short far jdos_close (short handle)
-;
-; Close the file handle
-;
-_jdos_close	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		mov	ah,3eh			; close file
-		int	21h
-		jc	close_err		; if failed, return error code
-		xor	ax,ax			; return zero for OK
-close_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_close	endp
-
-
-;
-; short far jdos_seek (short handle, long offset)
-;
-; Set file position
-;
-_jdos_seek	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		mov	dx,word ptr [bp+8]	; LS offset
-		mov	cx,word ptr [bp+10]	; MS offset
-		mov	ax,4200h		; absolute seek
-		int	21h
-		jc	seek_err		; if failed, return error code
-		xor	ax,ax			; return zero for OK
-seek_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_seek	endp
-
-
-;
-; short far jdos_read (short handle, void far * buffer, unsigned short count)
-;
-; Read from file
-;
-_jdos_read	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		lds	dx,dword ptr [bp+8]	; buffer address
-		mov	cx,word ptr [bp+12]	; number of bytes
-		mov	ah,3fh			; read file
-		int	21h
-		jc	read_err		; if failed, return error code
-		cmp	ax,word ptr [bp+12]	; make sure all bytes were read
-		je	read_ok
-		mov	ax,1			; else return 1 for not OK
-		jmp	short read_err
-read_ok:	xor	ax,ax			; return zero for OK
-read_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_read	endp
-
-
-;
-; short far jdos_write (short handle, void far * buffer, unsigned short count)
-;
-; Write to file
-;
-_jdos_write	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	bx,word ptr [bp+6]	; file handle
-		lds	dx,dword ptr [bp+8]	; buffer address
-		mov	cx,word ptr [bp+12]	; number of bytes
-		mov	ah,40h			; write file
-		int	21h
-		jc	write_err		; if failed, return error code
-		cmp	ax,word ptr [bp+12]	; make sure all bytes written
-		je	write_ok
-		mov	ax,1			; else return 1 for not OK
-		jmp	short write_err
-write_ok:	xor	ax,ax			; return zero for OK
-write_err:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jdos_write	endp
-
-
-;
-; void far jxms_getdriver (XMSDRIVER far *)
-;
-; Get the address of the XMS driver, or NULL if not available
-;
-_jxms_getdriver	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov 	ax,4300h		; call multiplex interrupt with
-		int	2fh			; a magic cookie, hex 4300
-		cmp 	al,80h			; AL should contain hex 80
-		je	xmsavail
-		xor 	dx,dx			; no XMS driver available
-		xor 	ax,ax			; return a nil pointer
-		jmp	short xmsavail_done
-xmsavail:	mov 	ax,4310h		; fetch driver address with
-		int	2fh			; another magic cookie
-		mov 	dx,es			; copy address to dx:ax
-		mov 	ax,bx
-xmsavail_done:	les 	bx,dword ptr [bp+6]	; get pointer to return value
-		mov	word ptr es:[bx],ax
-		mov	word ptr es:[bx+2],dx
-		pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop	bp
-		ret
-_jxms_getdriver	endp
-
-
-;
-; void far jxms_calldriver (XMSDRIVER, XMScontext far *)
-;
-; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers.
-; These are loaded, the XMS call is performed, and the new values of the
-; AX,DX,BX registers are written back to the context structure.
-;
-_jxms_calldriver 	proc	far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
-		mov 	ax,word ptr es:[bx]	; load registers
-		mov 	dx,word ptr es:[bx+2]
-		mov 	si,word ptr es:[bx+6]
-		mov 	ds,word ptr es:[bx+8]
-		mov 	bx,word ptr es:[bx+4]
-		call	dword ptr [bp+6]	; call the driver
-		mov	cx,bx			; save returned BX for a sec
-		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
-		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
-		mov 	word ptr es:[bx+2],dx
-		mov 	word ptr es:[bx+4],cx
-		pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jxms_calldriver 	endp
-
-
-;
-; short far jems_available (void)
-;
-; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs)
-;
-_jems_available	proc	far
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		mov	ax,3567h		; get interrupt vector 67h
-		int	21h
-		push	cs
-		pop	ds
-		mov	di,000ah		; check offs 10 in returned seg
-		lea	si,ASCII_device_name	; against literal string
-		mov	cx,8
-		cld
-		repe cmpsb
-		jne	no_ems
-		mov	ax,1			; match, it's there
-		jmp	short avail_done
-no_ems:		xor	ax,ax			; it's not there
-avail_done:	pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		ret
-
-ASCII_device_name	db	"EMMXXXX0"
-
-_jems_available	endp
-
-
-;
-; void far jems_calldriver (EMScontext far *)
-;
-; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers.
-; These are loaded, the EMS trap is performed, and the new values of the
-; AX,DX,BX registers are written back to the context structure.
-;
-_jems_calldriver	proc far
-		push	bp			; linkage
-		mov 	bp,sp
-		push	si			; save all registers for safety
-		push	di
-		push	bx
-		push	cx
-		push	dx
-		push	es
-		push	ds
-		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
-		mov 	ax,word ptr es:[bx]	; load registers
-		mov 	dx,word ptr es:[bx+2]
-		mov 	si,word ptr es:[bx+6]
-		mov 	ds,word ptr es:[bx+8]
-		mov 	bx,word ptr es:[bx+4]
-		int	67h			; call the EMS driver
-		mov	cx,bx			; save returned BX for a sec
-		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
-		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
-		mov 	word ptr es:[bx+2],dx
-		mov 	word ptr es:[bx+4],cx
-		pop	ds			; restore registers and exit
-		pop	es
-		pop	dx
-		pop	cx
-		pop	bx
-		pop	di
-		pop	si
-		pop 	bp
-		ret
-_jems_calldriver	endp
-
-JMEMDOSA_TXT	ends
-
-		end

jmemmac.c

@@ -1,199 +0,0 @@
-/*
- * jmemmac.c
- *
- * Copyright (C) 1992-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * jmemmac.c provides an Apple Macintosh implementation of the system-
- * dependent portion of the JPEG memory manager.
- *
- * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr
- * instead of malloc and free.  It accurately determines the amount of
- * memory available by using CompactMem.  Notice that if left to its
- * own devices, this code can chew up all available space in the
- * application's zone, with the exception of the rather small "slop"
- * factor computed in jpeg_mem_available().  The application can ensure
- * that more space is left over by reducing max_memory_to_use.
- *
- * Large images are swapped to disk using temporary files created with
- * tmpfile(); that part of the module is the same as in jmemansi.c.
- * Metrowerks CodeWarrior's implementation of tmpfile() isn't quite what
- * we want: it puts the files in the local directory and makes them
- * user-visible -- and only deletes them when the application quits,
- * which means they stick around in the event of a crash.
- * It would be better to create the temp files in the system's temporary
- * items folder.  Perhaps someday we'll get around to doing that.
- *
- * Contributed by Sam Bushell (jsam@iagu.on.net).
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h"		/* import the system-dependent declarations */
-
-#include <Memory.h>		/* we use the MacOS memory manager */
-
-#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
-#define SEEK_SET  0		/* if not, assume 0 is correct */
-#endif
-
-
-/*
- * Memory allocation and freeing are controlled by the MacOS library
- * routines NewPtr() and DisposePtr(), which allocate fixed-address
- * storage.  Unfortunately, the IJG library isn't smart enough to cope
- * with relocatable storage.
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void *) NewPtr(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
-  DisposePtr((Ptr) object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: we include FAR keywords in the routine declarations simply for
- * consistency with the rest of the IJG code; FAR should expand to empty
- * on rational architectures like the Mac.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void FAR *) NewPtr(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
-  DisposePtr((Ptr) object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- */
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
-		    long max_bytes_needed, long already_allocated)
-{
-  long limit = cinfo->mem->max_memory_to_use - already_allocated;
-  long slop, mem;
-
-  /* Don't ask for more than what application has told us we may use */
-  if (max_bytes_needed > limit && limit > 0)
-    max_bytes_needed = limit;
-  /* Find whether there's a big enough free block in the heap.
-   * CompactMem tries to create a contiguous block of the requested size,
-   * and then returns the size of the largest free block (which could be
-   * much more or much less than we asked for).
-   * We add some slop to ensure we don't use up all available memory.
-   */
-  slop = max_bytes_needed / 16 + 32768L;
-  mem = CompactMem(max_bytes_needed + slop) - slop;
-  if (mem < 0)
-    mem = 0;			/* sigh, couldn't even get the slop */
-  /* Don't take more than the application says we can have */
-  if (mem > limit && limit > 0)
-    mem = limit;
-  return mem;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed.  You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-		    void FAR * buffer_address,
-		    long file_offset, long byte_count)
-{
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFREAD(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
-    ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-		     void FAR * buffer_address,
-		     long file_offset, long byte_count)
-{
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFWRITE(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
-    ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
-  fclose(info->temp_file);
-  /* Since this implementation uses tmpfile() to create the file,
-   * no explicit file deletion is needed.
-   */
-}
-
-
-/*
- * Initial opening of a backing-store object.
- *
- * This version uses tmpfile(), which constructs a suitable file name
- * behind the scenes.  We don't have to use info->temp_name[] at all;
- * indeed, we can't even find out the actual name of the temp file.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-			 long total_bytes_needed)
-{
-  if ((info->temp_file = tmpfile()) == NULL)
-    ERREXITS(cinfo, JERR_TFILE_CREATE, "");
-  info->read_backing_store = read_backing_store;
-  info->write_backing_store = write_backing_store;
-  info->close_backing_store = close_backing_store;
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
-  /* max_memory_to_use will be initialized to FreeMem()'s result;
-   * the calling application might later reduce it, for example
-   * to leave room to invoke multiple JPEG objects.
-   * Note that FreeMem returns the total number of free bytes;
-   * it may not be possible to allocate a single block of this size.
-   */
-  return FreeMem();
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
-  /* no work */
-}

jmemmgr.c

@@ -1,7 +1,7 @@
 /*
  * jmemmgr.c
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -57,22 +57,25 @@ extern char * getenv JPP((const char * name));
  * requirement, and we had better do so too.
  * There isn't any really portable way to determine the worst-case alignment
  * requirement.  This module assumes that the alignment requirement is
- * multiples of sizeof(ALIGN_TYPE).
- * By default, we define ALIGN_TYPE as double.  This is necessary on some
+ * multiples of ALIGN_SIZE.
+ * By default, we define ALIGN_SIZE as sizeof(double).  This is necessary on some
  * workstations (where doubles really do need 8-byte alignment) and will work
  * fine on nearly everything.  If your machine has lesser alignment needs,
- * you can save a few bytes by making ALIGN_TYPE smaller.
+ * you can save a few bytes by making ALIGN_SIZE smaller.
  * The only place I know of where this will NOT work is certain Macintosh
  * 680x0 compilers that define double as a 10-byte IEEE extended float.
  * Doing 10-byte alignment is counterproductive because longwords won't be
- * aligned well.  Put "#define ALIGN_TYPE long" in jconfig.h if you have
+ * aligned well.  Put "#define ALIGN_SIZE 4" in jconfig.h if you have
  * such a compiler.
  */
 
-#ifndef ALIGN_TYPE		/* so can override from jconfig.h */
-#define ALIGN_TYPE  double
+#ifndef ALIGN_SIZE		/* so can override from jconfig.h */
+#ifndef WITH_SIMD
+#define ALIGN_SIZE  SIZEOF(double)
+#else
+#define ALIGN_SIZE  16 /* Most SIMD implementations require this */
+#endif
 #endif
-
 
 /*
  * We allocate objects from "pools", where each pool is gotten with a single
@@ -81,34 +84,24 @@ extern char * getenv JPP((const char * name));
  * header with a link to the next pool of the same class.
  * Small and large pool headers are identical except that the latter's
  * link pointer must be FAR on 80x86 machines.
- * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE
- * field.  This forces the compiler to make SIZEOF(small_pool_hdr) a multiple
- * of the alignment requirement of ALIGN_TYPE.
  */
 
-typedef union small_pool_struct * small_pool_ptr;
+typedef struct small_pool_struct * small_pool_ptr;
 
-typedef union small_pool_struct {
-  struct {
-    small_pool_ptr next;	/* next in list of pools */
-    size_t bytes_used;		/* how many bytes already used within pool */
-    size_t bytes_left;		/* bytes still available in this pool */
-  } hdr;
-  ALIGN_TYPE dummy;		/* included in union to ensure alignment */
+typedef struct small_pool_struct {
+  small_pool_ptr next;	/* next in list of pools */
+  size_t bytes_used;		/* how many bytes already used within pool */
+  size_t bytes_left;		/* bytes still available in this pool */
 } small_pool_hdr;
 
-typedef union large_pool_struct FAR * large_pool_ptr;
+typedef struct large_pool_struct FAR * large_pool_ptr;
 
-typedef union large_pool_struct {
-  struct {
-    large_pool_ptr next;	/* next in list of pools */
-    size_t bytes_used;		/* how many bytes already used within pool */
-    size_t bytes_left;		/* bytes still available in this pool */
-  } hdr;
-  ALIGN_TYPE dummy;		/* included in union to ensure alignment */
+typedef struct large_pool_struct {
+  large_pool_ptr next;	/* next in list of pools */
+  size_t bytes_used;		/* how many bytes already used within pool */
+  size_t bytes_left;		/* bytes still available in this pool */
 } large_pool_hdr;
 
-
 /*
  * Here is the full definition of a memory manager object.
  */
@@ -197,16 +190,16 @@ print_mem_stats (j_common_ptr cinfo, int pool_id)
 	  pool_id, mem->total_space_allocated);
 
   for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL;
-       lhdr_ptr = lhdr_ptr->hdr.next) {
+       lhdr_ptr = lhdr_ptr->next) {
     fprintf(stderr, "  Large chunk used %ld\n",
-	    (long) lhdr_ptr->hdr.bytes_used);
+	    (long) lhdr_ptr->bytes_used);
   }
 
   for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL;
-       shdr_ptr = shdr_ptr->hdr.next) {
+       shdr_ptr = shdr_ptr->next) {
     fprintf(stderr, "  Small chunk used %ld free %ld\n",
-	    (long) shdr_ptr->hdr.bytes_used,
-	    (long) shdr_ptr->hdr.bytes_left);
+	    (long) shdr_ptr->bytes_used,
+	    (long) shdr_ptr->bytes_left);
   }
 }
 
@@ -236,6 +229,10 @@ out_of_memory (j_common_ptr cinfo, int which)
  * and we also distinguish the first pool of a class from later ones.
  * NOTE: the values given work fairly well on both 16- and 32-bit-int
  * machines, but may be too small if longs are 64 bits or more.
+ *
+ * Since we do not know what alignment malloc() gives us, we have to
+ * allocate ALIGN_SIZE-1 extra space per pool to have room for alignment
+ * adjustment.
  */
 
 static const size_t first_pool_slop[JPOOL_NUMPOOLS] = 
@@ -260,33 +257,36 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
   my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
   small_pool_ptr hdr_ptr, prev_hdr_ptr;
   char * data_ptr;
-  size_t odd_bytes, min_request, slop;
+  size_t min_request, slop;
+
+  /*
+   * Round up the requested size to a multiple of ALIGN_SIZE in order
+   * to assure alignment for the next object allocated in the same pool
+   * and so that algorithms can straddle outside the proper area up
+   * to the next alignment.
+   */
+  sizeofobject = jround_up(sizeofobject, ALIGN_SIZE);
 
   /* Check for unsatisfiable request (do now to ensure no overflow below) */
-  if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr)))
+  if ((SIZEOF(small_pool_hdr) + sizeofobject + ALIGN_SIZE - 1) > MAX_ALLOC_CHUNK)
     out_of_memory(cinfo, 1);	/* request exceeds malloc's ability */
 
-  /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
-  odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
-  if (odd_bytes > 0)
-    sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
-
   /* See if space is available in any existing pool */
   if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
     ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
   prev_hdr_ptr = NULL;
   hdr_ptr = mem->small_list[pool_id];
   while (hdr_ptr != NULL) {
-    if (hdr_ptr->hdr.bytes_left >= sizeofobject)
+    if (hdr_ptr->bytes_left >= sizeofobject)
       break;			/* found pool with enough space */
     prev_hdr_ptr = hdr_ptr;
-    hdr_ptr = hdr_ptr->hdr.next;
+    hdr_ptr = hdr_ptr->next;
   }
 
   /* Time to make a new pool? */
   if (hdr_ptr == NULL) {
     /* min_request is what we need now, slop is what will be leftover */
-    min_request = sizeofobject + SIZEOF(small_pool_hdr);
+    min_request = SIZEOF(small_pool_hdr) + sizeofobject + ALIGN_SIZE - 1;
     if (prev_hdr_ptr == NULL)	/* first pool in class? */
       slop = first_pool_slop[pool_id];
     else
@@ -305,20 +305,23 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
     }
     mem->total_space_allocated += min_request + slop;
     /* Success, initialize the new pool header and add to end of list */
-    hdr_ptr->hdr.next = NULL;
-    hdr_ptr->hdr.bytes_used = 0;
-    hdr_ptr->hdr.bytes_left = sizeofobject + slop;
+    hdr_ptr->next = NULL;
+    hdr_ptr->bytes_used = 0;
+    hdr_ptr->bytes_left = sizeofobject + slop;
     if (prev_hdr_ptr == NULL)	/* first pool in class? */
       mem->small_list[pool_id] = hdr_ptr;
     else
-      prev_hdr_ptr->hdr.next = hdr_ptr;
+      prev_hdr_ptr->next = hdr_ptr;
   }
 
   /* OK, allocate the object from the current pool */
-  data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */
-  data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */
-  hdr_ptr->hdr.bytes_used += sizeofobject;
-  hdr_ptr->hdr.bytes_left -= sizeofobject;
+  data_ptr = (char *) hdr_ptr; /* point to first data byte in pool... */
+  data_ptr += SIZEOF(small_pool_hdr); /* ...by skipping the header... */
+  if ((unsigned long)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
+    data_ptr += ALIGN_SIZE - (unsigned long)data_ptr % ALIGN_SIZE;
+  data_ptr += hdr_ptr->bytes_used; /* point to place for object */
+  hdr_ptr->bytes_used += sizeofobject;
+  hdr_ptr->bytes_left -= sizeofobject;
 
   return (void *) data_ptr;
 }
@@ -344,37 +347,45 @@ alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
 {
   my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
   large_pool_ptr hdr_ptr;
-  size_t odd_bytes;
+  char FAR * data_ptr;
+
+  /*
+   * Round up the requested size to a multiple of ALIGN_SIZE so that
+   * algorithms can straddle outside the proper area up to the next
+   * alignment.
+   */
+  sizeofobject = jround_up(sizeofobject, ALIGN_SIZE);
 
   /* Check for unsatisfiable request (do now to ensure no overflow below) */
-  if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)))
+  if ((SIZEOF(large_pool_hdr) + sizeofobject + ALIGN_SIZE - 1) > MAX_ALLOC_CHUNK)
     out_of_memory(cinfo, 3);	/* request exceeds malloc's ability */
 
-  /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
-  odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
-  if (odd_bytes > 0)
-    sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
-
   /* Always make a new pool */
   if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
     ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
 
   hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject +
-					    SIZEOF(large_pool_hdr));
+					    SIZEOF(large_pool_hdr) +
+					    ALIGN_SIZE - 1);
   if (hdr_ptr == NULL)
     out_of_memory(cinfo, 4);	/* jpeg_get_large failed */
-  mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr);
+  mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr) + ALIGN_SIZE - 1;
 
   /* Success, initialize the new pool header and add to list */
-  hdr_ptr->hdr.next = mem->large_list[pool_id];
+  hdr_ptr->next = mem->large_list[pool_id];
   /* We maintain space counts in each pool header for statistical purposes,
    * even though they are not needed for allocation.
    */
-  hdr_ptr->hdr.bytes_used = sizeofobject;
-  hdr_ptr->hdr.bytes_left = 0;
+  hdr_ptr->bytes_used = sizeofobject;
+  hdr_ptr->bytes_left = 0;
   mem->large_list[pool_id] = hdr_ptr;
 
-  return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */
+  data_ptr = (char *) hdr_ptr; /* point to first data byte in pool... */
+  data_ptr += SIZEOF(small_pool_hdr); /* ...by skipping the header... */
+  if ((unsigned long)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
+    data_ptr += ALIGN_SIZE - (unsigned long)data_ptr % ALIGN_SIZE;
+
+  return (void FAR *) data_ptr;
 }
 
 
@@ -389,6 +400,10 @@ alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
  * this chunking of rows.  The rowsperchunk value is left in the mem manager
  * object so that it can be saved away if this sarray is the workspace for
  * a virtual array.
+ *
+ * Since we are often upsampling with a factor 2, we align the size (not
+ * the start) to 2 * ALIGN_SIZE so that the upsampling routines don't have
+ * to be as careful about size.
  */
 
 METHODDEF(JSAMPARRAY)
@@ -402,6 +417,11 @@ alloc_sarray (j_common_ptr cinfo, int pool_id,
   JDIMENSION rowsperchunk, currow, i;
   long ltemp;
 
+  /* Make sure each row is properly aligned */
+  if ((ALIGN_SIZE % SIZEOF(JSAMPLE)) != 0)
+    out_of_memory(cinfo, 5);	/* safety check */
+  samplesperrow = jround_up(samplesperrow, (2 * ALIGN_SIZE) / SIZEOF(JSAMPLE));
+
   /* Calculate max # of rows allowed in one allocation chunk */
   ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
 	  ((long) samplesperrow * SIZEOF(JSAMPLE));
@@ -450,6 +470,10 @@ alloc_barray (j_common_ptr cinfo, int pool_id,
   JDIMENSION rowsperchunk, currow, i;
   long ltemp;
 
+  /* Make sure each row is properly aligned */
+  if ((SIZEOF(JBLOCK) % ALIGN_SIZE) != 0)
+    out_of_memory(cinfo, 6);	/* safety check */
+
   /* Calculate max # of rows allowed in one allocation chunk */
   ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
 	  ((long) blocksperrow * SIZEOF(JBLOCK));
@@ -968,9 +992,9 @@ free_pool (j_common_ptr cinfo, int pool_id)
   mem->large_list[pool_id] = NULL;
 
   while (lhdr_ptr != NULL) {
-    large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next;
-    space_freed = lhdr_ptr->hdr.bytes_used +
-		  lhdr_ptr->hdr.bytes_left +
+    large_pool_ptr next_lhdr_ptr = lhdr_ptr->next;
+    space_freed = lhdr_ptr->bytes_used +
+		  lhdr_ptr->bytes_left +
 		  SIZEOF(large_pool_hdr);
     jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed);
     mem->total_space_allocated -= space_freed;
@@ -982,9 +1006,9 @@ free_pool (j_common_ptr cinfo, int pool_id)
   mem->small_list[pool_id] = NULL;
 
   while (shdr_ptr != NULL) {
-    small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next;
-    space_freed = shdr_ptr->hdr.bytes_used +
-		  shdr_ptr->hdr.bytes_left +
+    small_pool_ptr next_shdr_ptr = shdr_ptr->next;
+    space_freed = shdr_ptr->bytes_used +
+		  shdr_ptr->bytes_left +
 		  SIZEOF(small_pool_hdr);
     jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed);
     mem->total_space_allocated -= space_freed;
@@ -1041,16 +1065,16 @@ jinit_memory_mgr (j_common_ptr cinfo)
    * in common if and only if X is a power of 2, ie has only one one-bit.
    * Some compilers may give an "unreachable code" warning here; ignore it.
    */
-  if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0)
+  if ((ALIGN_SIZE & (ALIGN_SIZE-1)) != 0)
     ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE);
   /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be
-   * a multiple of SIZEOF(ALIGN_TYPE).
+   * a multiple of ALIGN_SIZE.
    * Again, an "unreachable code" warning may be ignored here.
    * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK.
    */
   test_mac = (size_t) MAX_ALLOC_CHUNK;
   if ((long) test_mac != MAX_ALLOC_CHUNK ||
-      (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0)
+      (MAX_ALLOC_CHUNK % ALIGN_SIZE) != 0)
     ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
 
   max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */
@@ -1076,6 +1100,9 @@ jinit_memory_mgr (j_common_ptr cinfo)
   mem->pub.free_pool = free_pool;
   mem->pub.self_destruct = self_destruct;
 
+  /* Make MAX_ALLOC_CHUNK accessible to other modules */
+  mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK;
+
   /* Initialize working state */
   mem->pub.max_memory_to_use = max_to_use;
 

jmemname.c

@@ -1,271 +0,0 @@
-/*
- * jmemname.c
- *
- * Copyright (C) 1992-1996, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file provides a generic implementation of the system-dependent
- * portion of the JPEG memory manager.  This implementation assumes that
- * you must explicitly construct a name for each temp file.
- * Also, the problem of determining the amount of memory available
- * is shoved onto the user.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jmemsys.h"		/* import the system-dependent declarations */
-
-#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
-extern void * malloc JPP((size_t size));
-extern void free JPP((void *ptr));
-#endif
-
-#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
-#define SEEK_SET  0		/* if not, assume 0 is correct */
-#endif
-
-#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
-#define READ_BINARY	"r"
-#define RW_BINARY	"w+"
-#else
-#define READ_BINARY	"rb"
-#define RW_BINARY	"w+b"
-#endif
-
-
-/*
- * Selection of a file name for a temporary file.
- * This is system-dependent!
- *
- * The code as given is suitable for most Unix systems, and it is easily
- * modified for most non-Unix systems.  Some notes:
- *  1.  The temp file is created in the directory named by TEMP_DIRECTORY.
- *      The default value is /usr/tmp, which is the conventional place for
- *      creating large temp files on Unix.  On other systems you'll probably
- *      want to change the file location.  You can do this by editing the
- *      #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h.
- *
- *  2.  If you need to change the file name as well as its location,
- *      you can override the TEMP_FILE_NAME macro.  (Note that this is
- *      actually a printf format string; it must contain %s and %d.)
- *      Few people should need to do this.
- *
- *  3.  mktemp() is used to ensure that multiple processes running
- *      simultaneously won't select the same file names.  If your system
- *      doesn't have mktemp(), define NO_MKTEMP to do it the hard way.
- *      (If you don't have <errno.h>, also define NO_ERRNO_H.)
- *
- *  4.  You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c
- *      will cause the temp files to be removed if you stop the program early.
- */
-
-#ifndef TEMP_DIRECTORY		/* can override from jconfig.h or Makefile */
-#define TEMP_DIRECTORY  "/usr/tmp/" /* recommended setting for Unix */
-#endif
-
-static int next_file_num;	/* to distinguish among several temp files */
-
-#ifdef NO_MKTEMP
-
-#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
-#define TEMP_FILE_NAME  "%sJPG%03d.TMP"
-#endif
-
-#ifndef NO_ERRNO_H
-#include <errno.h>		/* to define ENOENT */
-#endif
-
-/* ANSI C specifies that errno is a macro, but on older systems it's more
- * likely to be a plain int variable.  And not all versions of errno.h
- * bother to declare it, so we have to in order to be most portable.  Thus:
- */
-#ifndef errno
-extern int errno;
-#endif
-
-
-LOCAL(void)
-select_file_name (char * fname)
-{
-  FILE * tfile;
-
-  /* Keep generating file names till we find one that's not in use */
-  for (;;) {
-    next_file_num++;		/* advance counter */
-    sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
-    if ((tfile = fopen(fname, READ_BINARY)) == NULL) {
-      /* fopen could have failed for a reason other than the file not
-       * being there; for example, file there but unreadable.
-       * If <errno.h> isn't available, then we cannot test the cause.
-       */
-#ifdef ENOENT
-      if (errno != ENOENT)
-	continue;
-#endif
-      break;
-    }
-    fclose(tfile);		/* oops, it's there; close tfile & try again */
-  }
-}
-
-#else /* ! NO_MKTEMP */
-
-/* Note that mktemp() requires the initial filename to end in six X's */
-#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
-#define TEMP_FILE_NAME  "%sJPG%dXXXXXX"
-#endif
-
-LOCAL(void)
-select_file_name (char * fname)
-{
-  next_file_num++;		/* advance counter */
-  sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
-  mktemp(fname);		/* make sure file name is unique */
-  /* mktemp replaces the trailing XXXXXX with a unique string of characters */
-}
-
-#endif /* NO_MKTEMP */
-
-
-/*
- * Memory allocation and freeing are controlled by the regular library
- * routines malloc() and free().
- */
-
-GLOBAL(void *)
-jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
-{
-  free(object);
-}
-
-
-/*
- * "Large" objects are treated the same as "small" ones.
- * NB: although we include FAR keywords in the routine declarations,
- * this file won't actually work in 80x86 small/medium model; at least,
- * you probably won't be able to process useful-size images in only 64KB.
- */
-
-GLOBAL(void FAR *)
-jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
-{
-  return (void FAR *) malloc(sizeofobject);
-}
-
-GLOBAL(void)
-jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
-{
-  free(object);
-}
-
-
-/*
- * This routine computes the total memory space available for allocation.
- * It's impossible to do this in a portable way; our current solution is
- * to make the user tell us (with a default value set at compile time).
- * If you can actually get the available space, it's a good idea to subtract
- * a slop factor of 5% or so.
- */
-
-#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
-#define DEFAULT_MAX_MEM		1000000L /* default: one megabyte */
-#endif
-
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
-		    long max_bytes_needed, long already_allocated)
-{
-  return cinfo->mem->max_memory_to_use - already_allocated;
-}
-
-
-/*
- * Backing store (temporary file) management.
- * Backing store objects are only used when the value returned by
- * jpeg_mem_available is less than the total space needed.  You can dispense
- * with these routines if you have plenty of virtual memory; see jmemnobs.c.
- */
-
-
-METHODDEF(void)
-read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-		    void FAR * buffer_address,
-		    long file_offset, long byte_count)
-{
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFREAD(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
-    ERREXIT(cinfo, JERR_TFILE_READ);
-}
-
-
-METHODDEF(void)
-write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-		     void FAR * buffer_address,
-		     long file_offset, long byte_count)
-{
-  if (fseek(info->temp_file, file_offset, SEEK_SET))
-    ERREXIT(cinfo, JERR_TFILE_SEEK);
-  if (JFWRITE(info->temp_file, buffer_address, byte_count)
-      != (size_t) byte_count)
-    ERREXIT(cinfo, JERR_TFILE_WRITE);
-}
-
-
-METHODDEF(void)
-close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
-{
-  fclose(info->temp_file);	/* close the file */
-  unlink(info->temp_name);	/* delete the file */
-/* If your system doesn't have unlink(), use remove() instead.
- * remove() is the ANSI-standard name for this function, but if
- * your system was ANSI you'd be using jmemansi.c, right?
- */
-  TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
-}
-
-
-/*
- * Initial opening of a backing-store object.
- */
-
-GLOBAL(void)
-jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
-			 long total_bytes_needed)
-{
-  select_file_name(info->temp_name);
-  if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL)
-    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
-  info->read_backing_store = read_backing_store;
-  info->write_backing_store = write_backing_store;
-  info->close_backing_store = close_backing_store;
-  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
-}
-
-
-/*
- * These routines take care of any system-dependent initialization and
- * cleanup required.
- */
-
-GLOBAL(long)
-jpeg_mem_init (j_common_ptr cinfo)
-{
-  next_file_num = 0;		/* initialize temp file name generator */
-  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
-}
-
-GLOBAL(void)
-jpeg_mem_term (j_common_ptr cinfo)
-{
-  /* no work */
-}

jmemsys.h

@@ -1,7 +1,7 @@
 /*
  * jmemsys.h
  *
- * Copyright (C) 1992-1996, Thomas G. Lane.
+ * Copyright (C) 1992-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,7 +14,8 @@
  * in the IJG distribution.  You may need to modify it if you write a
  * custom memory manager.  If system-dependent changes are needed in
  * this file, the best method is to #ifdef them based on a configuration
- * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR.
+ * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR
+ * and USE_MAC_MEMMGR.
  */
 
 
@@ -114,6 +115,7 @@ EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo,
 
 #define TEMP_NAME_LENGTH   64	/* max length of a temporary file's name */
 
+
 #ifdef USE_MSDOS_MEMMGR		/* DOS-specific junk */
 
 typedef unsigned short XMSH;	/* type of extended-memory handles */
@@ -127,6 +129,11 @@ typedef union {
 
 #endif /* USE_MSDOS_MEMMGR */
 
+#ifdef USE_MAC_MEMMGR		/* Mac-specific junk */
+#include <Files.h>
+#endif /* USE_MAC_MEMMGR */
+
+
 typedef struct backing_store_struct * backing_store_ptr;
 
 typedef struct backing_store_struct {
@@ -147,13 +154,21 @@ typedef struct backing_store_struct {
   /* For the MS-DOS manager (jmemdos.c), we need: */
   handle_union handle;		/* reference to backing-store storage object */
   char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
+#else
+#ifdef USE_MAC_MEMMGR
+  /* For the Mac manager (jmemmac.c), we need: */
+  short temp_file;		/* file reference number to temp file */
+  FSSpec tempSpec;		/* the FSSpec for the temp file */
+  char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */
 #else
   /* For a typical implementation with temp files, we need: */
   FILE * temp_file;		/* stdio reference to temp file */
   char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */
 #endif
+#endif
 } backing_store_info;
 
+
 /*
  * Initial opening of a backing-store object.  This must fill in the
  * read/write/close pointers in the object.  The read/write routines

jmorecfg.h

@@ -1,7 +1,8 @@
 /*
  * jmorecfg.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Copyright (C) 2009, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -62,11 +63,11 @@ typedef unsigned char JSAMPLE;
 #else /* not HAVE_UNSIGNED_CHAR */
 
 typedef char JSAMPLE;
-#ifdef CHAR_IS_UNSIGNED
+#ifdef __CHAR_UNSIGNED__
 #define GETJSAMPLE(value)  ((int) (value))
 #else
 #define GETJSAMPLE(value)  ((int) (value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
+#endif /* __CHAR_UNSIGNED__ */
 
 #endif /* HAVE_UNSIGNED_CHAR */
 
@@ -113,11 +114,11 @@ typedef unsigned char JOCTET;
 #else /* not HAVE_UNSIGNED_CHAR */
 
 typedef char JOCTET;
-#ifdef CHAR_IS_UNSIGNED
+#ifdef __CHAR_UNSIGNED__
 #define GETJOCTET(value)  (value)
 #else
 #define GETJOCTET(value)  ((value) & 0xFF)
-#endif /* CHAR_IS_UNSIGNED */
+#endif /* __CHAR_UNSIGNED__ */
 
 #endif /* HAVE_UNSIGNED_CHAR */
 
@@ -134,11 +135,11 @@ typedef char JOCTET;
 #ifdef HAVE_UNSIGNED_CHAR
 typedef unsigned char UINT8;
 #else /* not HAVE_UNSIGNED_CHAR */
-#ifdef CHAR_IS_UNSIGNED
+#ifdef __CHAR_UNSIGNED__
 typedef char UINT8;
-#else /* not CHAR_IS_UNSIGNED */
+#else /* not __CHAR_UNSIGNED__ */
 typedef short UINT8;
-#endif /* CHAR_IS_UNSIGNED */
+#endif /* __CHAR_UNSIGNED__ */
 #endif /* HAVE_UNSIGNED_CHAR */
 
 /* UINT16 must hold at least the values 0..65535. */
@@ -285,6 +286,7 @@ typedef int boolean;
 #undef  D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
 #define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
 #define D_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
+#define SAVE_MARKERS_SUPPORTED	    /* jpeg_save_markers() needed? */
 #define BLOCK_SMOOTHING_SUPPORTED   /* Block smoothing? (Progressive only) */
 #define IDCT_SCALING_SUPPORTED	    /* Output rescaling via IDCT? */
 #undef  UPSAMPLE_SCALING_SUPPORTED  /* Output rescaling at upsample stage? */
@@ -315,31 +317,37 @@ typedef int boolean;
 #define RGB_BLUE	2	/* Offset of Blue */
 #define RGB_PIXELSIZE	3	/* JSAMPLEs per RGB scanline element */
 
+#define JPEG_NUMCS 12
+
+static const int rgb_red[JPEG_NUMCS] = {
+	-1, -1, RGB_RED, -1, -1, -1, 0, 0, 2, 2, 3, 1
+};
+
+static const int rgb_green[JPEG_NUMCS] = {
+	-1, -1, RGB_GREEN, -1, -1, -1, 1, 1, 1, 1, 2, 2
+};
+
+static const int rgb_blue[JPEG_NUMCS] = {
+	-1, -1, RGB_BLUE, -1, -1, -1, 2, 2, 0, 0, 1, 3
+};
+
+static const int rgb_pixelsize[JPEG_NUMCS] = {
+	-1, -1, RGB_PIXELSIZE, -1, -1, -1, 3, 4, 3, 4, 4, 4
+};
 
 /* Definitions for speed-related optimizations. */
 
-
-/* If your compiler supports inline functions, define INLINE
- * as the inline keyword; otherwise define it as empty.
- */
-
-#ifndef INLINE
-#ifdef __GNUC__			/* for instance, GNU C knows about inline */
-#define INLINE __inline__
-#endif
-#ifndef INLINE
-#define INLINE			/* default is to define it as empty */
-#endif
-#endif
-
-
 /* On some machines (notably 68000 series) "int" is 32 bits, but multiplying
  * two 16-bit shorts is faster than multiplying two ints.  Define MULTIPLIER
  * as short on such a machine.  MULTIPLIER must be at least 16 bits wide.
  */
 
 #ifndef MULTIPLIER
+#ifndef WITH_SIMD
 #define MULTIPLIER  int		/* type for fastest integer multiply */
+#else
+#define MULTIPLIER short  /* prefer 16-bit with SIMD for parellelism */
+#endif
 #endif
 
 

jpegint.h

@@ -1,7 +1,7 @@
 /*
  * jpegint.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -118,15 +118,16 @@ struct jpeg_entropy_encoder {
 
 /* Marker writing */
 struct jpeg_marker_writer {
-  /* write_any_marker is exported for use by applications */
-  /* Probably only COM and APPn markers should be written */
-  JMETHOD(void, write_any_marker, (j_compress_ptr cinfo, int marker,
-				   const JOCTET *dataptr, unsigned int datalen));
   JMETHOD(void, write_file_header, (j_compress_ptr cinfo));
   JMETHOD(void, write_frame_header, (j_compress_ptr cinfo));
   JMETHOD(void, write_scan_header, (j_compress_ptr cinfo));
   JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo));
   JMETHOD(void, write_tables_only, (j_compress_ptr cinfo));
+  /* These routines are exported to allow insertion of extra markers */
+  /* Probably only COM and APPn markers should be written this way */
+  JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker,
+				      unsigned int datalen));
+  JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val));
 };
 
 
@@ -194,9 +195,6 @@ struct jpeg_marker_reader {
   JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
   /* Read a restart marker --- exported for use by entropy decoder only */
   jpeg_marker_parser_method read_restart_marker;
-  /* Application-overridable marker processing methods */
-  jpeg_marker_parser_method process_COM;
-  jpeg_marker_parser_method process_APPn[16];
 
   /* State of marker reader --- nominally internal, but applications
    * supplying COM or APPn handlers might like to know the state.
@@ -212,6 +210,10 @@ struct jpeg_entropy_decoder {
   JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
   JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo,
 				JBLOCKROW *MCU_data));
+
+  /* This is here to share code between baseline and progressive decoders; */
+  /* other modules probably should not use it */
+  boolean insufficient_data;	/* set TRUE after emitting warning */
 };
 
 /* Inverse DCT (also performs dequantization) */
@@ -375,7 +377,9 @@ EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
 				  JDIMENSION num_blocks));
 EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
 /* Constant tables in jutils.c */
+#if 0				/* This table is not actually needed in v6a */
 extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
+#endif
 extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
 
 /* Suppress undefined-structure complaints if necessary. */

jpeglib.h

@@ -1,7 +1,8 @@
 /*
  * jpeglib.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Copyright (C) 2009, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -13,6 +14,10 @@
 #ifndef JPEGLIB_H
 #define JPEGLIB_H
 
+#ifdef __cplusplus
+extern "C" {
+#endif
+
 /*
  * First we include the configuration files that record how this
  * installation of the JPEG library is set up.  jconfig.h can be
@@ -30,7 +35,7 @@
  * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60".
  */
 
-#define JPEG_LIB_VERSION  61	/* Version 6a */
+#define JPEG_LIB_VERSION  62	/* Version 6b */
 
 
 /* Various constants determining the sizes of things.
@@ -188,16 +193,37 @@ typedef struct {
   int Ah, Al;			/* progressive JPEG successive approx. parms */
 } jpeg_scan_info;
 
+/* The decompressor can save APPn and COM markers in a list of these: */
+
+typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr;
+
+struct jpeg_marker_struct {
+  jpeg_saved_marker_ptr next;	/* next in list, or NULL */
+  UINT8 marker;			/* marker code: JPEG_COM, or JPEG_APP0+n */
+  unsigned int original_length;	/* # bytes of data in the file */
+  unsigned int data_length;	/* # bytes of data saved at data[] */
+  JOCTET FAR * data;		/* the data contained in the marker */
+  /* the marker length word is not counted in data_length or original_length */
+};
 
 /* Known color spaces. */
 
+#define JCS_EXTENSIONS 1
+
 typedef enum {
 	JCS_UNKNOWN,		/* error/unspecified */
 	JCS_GRAYSCALE,		/* monochrome */
-	JCS_RGB,		/* red/green/blue */
+	JCS_RGB,		/* red/green/blue as specified by the RGB_RED, RGB_GREEN,
+                 RGB_BLUE, and RGB_PIXELSIZE macros */
 	JCS_YCbCr,		/* Y/Cb/Cr (also known as YUV) */
 	JCS_CMYK,		/* C/M/Y/K */
-	JCS_YCCK		/* Y/Cb/Cr/K */
+	JCS_YCCK,		/* Y/Cb/Cr/K */
+	JCS_EXT_RGB,		/* red/green/blue */
+	JCS_EXT_RGBX,		/* red/green/blue/x */
+	JCS_EXT_BGR,		/* blue/green/red */
+	JCS_EXT_BGRX,		/* blue/green/red/x */
+	JCS_EXT_XBGR,		/* x/blue/green/red */
+	JCS_EXT_XRGB		/* x/red/green/blue */
 } J_COLOR_SPACE;
 
 /* DCT/IDCT algorithm options. */
@@ -230,8 +256,9 @@ typedef enum {
   struct jpeg_error_mgr * err;	/* Error handler module */\
   struct jpeg_memory_mgr * mem;	/* Memory manager module */\
   struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\
-  boolean is_decompressor;	/* so common code can tell which is which */\
-  int global_state		/* for checking call sequence validity */
+  void * client_data;		/* Available for use by application */\
+  boolean is_decompressor;	/* So common code can tell which is which */\
+  int global_state		/* For checking call sequence validity */
 
 /* Routines that are to be used by both halves of the library are declared
  * to receive a pointer to this structure.  There are no actual instances of
@@ -322,6 +349,8 @@ struct jpeg_compress_struct {
   /* Parameters controlling emission of special markers. */
 
   boolean write_JFIF_header;	/* should a JFIF marker be written? */
+  UINT8 JFIF_major_version;	/* What to write for the JFIF version number */
+  UINT8 JFIF_minor_version;
   /* These three values are not used by the JPEG code, merely copied */
   /* into the JFIF APP0 marker.  density_unit can be 0 for unknown, */
   /* 1 for dots/inch, or 2 for dots/cm.  Note that the pixel aspect */
@@ -386,6 +415,8 @@ struct jpeg_compress_struct {
   struct jpeg_downsampler * downsample;
   struct jpeg_forward_dct * fdct;
   struct jpeg_entropy_encoder * entropy;
+  jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */
+  int script_space_size;
 };
 
 
@@ -531,7 +562,9 @@ struct jpeg_decompress_struct {
    * the JPEG library.
    */
   boolean saw_JFIF_marker;	/* TRUE iff a JFIF APP0 marker was found */
-  /* Data copied from JFIF marker: */
+  /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */
+  UINT8 JFIF_major_version;	/* JFIF version number */
+  UINT8 JFIF_minor_version;
   UINT8 density_unit;		/* JFIF code for pixel size units */
   UINT16 X_density;		/* Horizontal pixel density */
   UINT16 Y_density;		/* Vertical pixel density */
@@ -540,6 +573,12 @@ struct jpeg_decompress_struct {
 
   boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
 
+  /* Aside from the specific data retained from APPn markers known to the
+   * library, the uninterpreted contents of any or all APPn and COM markers
+   * can be saved in a list for examination by the application.
+   */
+  jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */
+
   /* Remaining fields are known throughout decompressor, but generally
    * should not be touched by a surrounding application.
    */
@@ -772,6 +811,9 @@ struct jpeg_memory_mgr {
    * after creating the JPEG object.
    */
   long max_memory_to_use;
+
+  /* Maximum allocation request accepted by alloc_large. */
+  long max_alloc_chunk;
 };
 
 
@@ -824,6 +866,8 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_finish_compress	jFinCompress
 #define jpeg_write_raw_data	jWrtRawData
 #define jpeg_write_marker	jWrtMarker
+#define jpeg_write_m_header	jWrtMHeader
+#define jpeg_write_m_byte	jWrtMByte
 #define jpeg_write_tables	jWrtTables
 #define jpeg_read_header	jReadHeader
 #define jpeg_start_decompress	jStrtDecompress
@@ -837,6 +881,7 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_new_colormap	jNewCMap
 #define jpeg_consume_input	jConsumeInput
 #define jpeg_calc_output_dimensions	jCalcDimensions
+#define jpeg_save_markers	jSaveMarkers
 #define jpeg_set_marker_processor	jSetMarker
 #define jpeg_read_coefficients	jReadCoefs
 #define jpeg_write_coefficients	jWrtCoefs
@@ -918,6 +963,11 @@ EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo,
 EXTERN(void) jpeg_write_marker
 	JPP((j_compress_ptr cinfo, int marker,
 	     const JOCTET * dataptr, unsigned int datalen));
+/* Same, but piecemeal. */
+EXTERN(void) jpeg_write_m_header
+	JPP((j_compress_ptr cinfo, int marker, unsigned int datalen));
+EXTERN(void) jpeg_write_m_byte
+	JPP((j_compress_ptr cinfo, int val));
 
 /* Alternate compression function: just write an abbreviated table file */
 EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo));
@@ -965,6 +1015,11 @@ EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo));
 /* Precalculate output dimensions for current decompression parameters. */
 EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo));
 
+/* Control saving of COM and APPn markers into marker_list. */
+EXTERN(void) jpeg_save_markers
+	JPP((j_decompress_ptr cinfo, int marker_code,
+	     unsigned int length_limit));
+
 /* Install a special processing method for COM or APPn markers. */
 EXTERN(void) jpeg_set_marker_processor
 	JPP((j_decompress_ptr cinfo, int marker_code,
@@ -1052,4 +1107,8 @@ struct jpeg_color_quantizer { long dummy; };
 #include "jerror.h"		/* fetch error codes too */
 #endif
 
+#ifdef __cplusplus
+}
+#endif
+
 #endif /* JPEGLIB_H */

jpegtran.1

@@ -1,6 +1,6 @@
-.TH JPEGTRAN 1 "15 June 1995"
+.TH JPEGTRAN 1 "3 August 1997"
 .SH NAME
-jpegtran \- lossless transcoding of JPEG files
+jpegtran \- lossless transformation of JPEG files
 .SH SYNOPSIS
 .B jpegtran
 [
@@ -13,23 +13,27 @@ jpegtran \- lossless transcoding of JPEG files
 .SH DESCRIPTION
 .LP
 .B jpegtran
-translates JPEG files from one variant of JPEG to another, for example
-from baseline JPEG to progressive JPEG.  The transformation is lossless:
-no image degradation occurs, which would not be true if you used
+performs various useful transformations of JPEG files.
+It can translate the coded representation from one variant of JPEG to another,
+for example from baseline JPEG to progressive JPEG or vice versa.  It can also
+perform some rearrangements of the image data, for example turning an image
+from landscape to portrait format by rotation.
+.PP
+.B jpegtran
+works by rearranging the compressed data (DCT coefficients), without
+ever fully decoding the image.  Therefore, its transformations are lossless:
+there is no image degradation at all, which would not be true if you used
 .B djpeg
 followed by
-.BR cjpeg .
-However, you cannot alter the image quality, because that would not be
-a lossless operation.
+.B cjpeg
+to accomplish the same conversion.  But by the same token,
+.B jpegtran
+cannot perform lossy operations such as changing the image quality.
+.PP
 .B jpegtran
 reads the named JPEG/JFIF file, or the standard input if no file is
 named, and produces a JPEG/JFIF file on the standard output.
 .SH OPTIONS
-.B jpegtran
-accepts a subset of the switches recognized by
-.BR cjpeg .
-If you specify no switches, you get a plain baseline JPEG output file.
-.PP
 All switch names may be abbreviated; for example,
 .B \-optimize
 may be written
@@ -41,41 +45,131 @@ British spellings are also accepted (e.g.,
 .BR \-optimise ),
 though for brevity these are not mentioned below.
 .PP
-The basic switches are:
+To specify the coded JPEG representation used in the output file,
+.B jpegtran
+accepts a subset of the switches recognized by
+.BR cjpeg :
 .TP
 .B \-optimize
-Perform optimization of entropy encoding parameters.  Without this, default
-encoding parameters are used.
-.B \-optimize
-usually makes the JPEG file a little smaller, but at the price of slower
-compression.  Note that
-.B \-progressive
-implies
-.BR \-optimize .
+Perform optimization of entropy encoding parameters.
 .TP
 .B \-progressive
-Create progressive JPEG file (see below).
-.PP
-The
-.B \-progressive
-switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
-is stored in multiple scans of increasing quality.  If the file is being
-transmitted over a slow communications link, the decoder can use the first
-scan to display a low-quality image very quickly, and can then improve the
-display with each subsequent scan.  The final image is exactly equivalent to a
-standard JPEG file of the same quality setting, and the total file size is
-about the same --- often a little smaller.
-.B Caution:
-progressive JPEG is not yet widely implemented, so many decoders will be
-unable to view a progressive JPEG file at all.
-.PP
-Switches for advanced users:
+Create progressive JPEG file.
 .TP
 .BI \-restart " N"
 Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
 attached to the number.
-.B \-restart 0
-(the default) means no restart markers.
+.TP
+.BI \-scans " file"
+Use the scan script given in the specified text file.
+.PP
+See
+.BR cjpeg (1)
+for more details about these switches.
+If you specify none of these switches, you get a plain baseline-JPEG output
+file.  The quality setting and so forth are determined by the input file.
+.PP
+The image can be losslessly transformed by giving one of these switches:
+.TP
+.B \-flip horizontal
+Mirror image horizontally (left-right).
+.TP
+.B \-flip vertical
+Mirror image vertically (top-bottom).
+.TP
+.B \-rotate 90
+Rotate image 90 degrees clockwise.
+.TP
+.B \-rotate 180
+Rotate image 180 degrees.
+.TP
+.B \-rotate 270
+Rotate image 270 degrees clockwise (or 90 ccw).
+.TP
+.B \-transpose
+Transpose image (across UL-to-LR axis).
+.TP
+.B \-transverse
+Transverse transpose (across UR-to-LL axis).
+.PP
+The transpose transformation has no restrictions regarding image dimensions.
+The other transformations operate rather oddly if the image dimensions are not
+a multiple of the iMCU size (usually 8 or 16 pixels), because they can only
+transform complete blocks of DCT coefficient data in the desired way.
+.PP
+.BR jpegtran 's
+default behavior when transforming an odd-size image is designed
+to preserve exact reversibility and mathematical consistency of the
+transformation set.  As stated, transpose is able to flip the entire image
+area.  Horizontal mirroring leaves any partial iMCU column at the right edge
+untouched, but is able to flip all rows of the image.  Similarly, vertical
+mirroring leaves any partial iMCU row at the bottom edge untouched, but is
+able to flip all columns.  The other transforms can be built up as sequences
+of transpose and flip operations; for consistency, their actions on edge
+pixels are defined to be the same as the end result of the corresponding
+transpose-and-flip sequence.
+.PP
+For practical use, you may prefer to discard any untransformable edge pixels
+rather than having a strange-looking strip along the right and/or bottom edges
+of a transformed image.  To do this, add the
+.B \-trim
+switch:
+.TP
+.B \-trim
+Drop non-transformable edge blocks.
+.PP
+Obviously, a transformation with
+.B \-trim
+is not reversible, so strictly speaking
+.B jpegtran
+with this switch is not lossless.  Also, the expected mathematical
+equivalences between the transformations no longer hold.  For example,
+.B \-rot 270 -trim
+trims only the bottom edge, but
+.B \-rot 90 -trim
+followed by
+.B \-rot 180 -trim
+trims both edges.
+.PP
+Another not-strictly-lossless transformation switch is:
+.TP
+.B \-grayscale
+Force grayscale output.
+.PP
+This option discards the chrominance channels if the input image is YCbCr
+(ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
+luminance channel is preserved exactly, so this is a better method of reducing
+to grayscale than decompression, conversion, and recompression.  This switch
+is particularly handy for fixing a monochrome picture that was mistakenly
+encoded as a color JPEG.  (In such a case, the space savings from getting rid
+of the near-empty chroma channels won't be large; but the decoding time for
+a grayscale JPEG is substantially less than that for a color JPEG.)
+.PP
+.B jpegtran
+also recognizes these switches that control what to do with "extra" markers,
+such as comment blocks:
+.TP
+.B \-copy none
+Copy no extra markers from source file.  This setting suppresses all
+comments and other excess baggage present in the source file.
+.TP
+.B \-copy comments
+Copy only comment markers.  This setting copies comments from the source file,
+but discards any other inessential data.
+.TP
+.B \-copy all
+Copy all extra markers.  This setting preserves miscellaneous markers
+found in the source file, such as JFIF thumbnails and Photoshop settings.
+In some files these extra markers can be sizable.
+.PP
+The default behavior is
+.BR "\-copy comments" .
+(Note: in IJG releases v6 and v6a,
+.B jpegtran
+always did the equivalent of
+.BR "\-copy none" .)
+.PP
+Additional switches recognized by jpegtran are:
 .TP
 .BI \-maxmemory " N"
 Set limit for amount of memory to use in processing large images.  Value is
@@ -95,26 +189,6 @@ give more output.  Also, version information is printed at startup.
 .B \-debug
 Same as
 .BR \-verbose .
-.PP
-The
-.B \-restart
-option inserts extra markers that allow a JPEG decoder to resynchronize after
-a transmission error.  Without restart markers, any damage to a compressed
-file will usually ruin the image from the point of the error to the end of the
-image; with restart markers, the damage is usually confined to the portion of
-the image up to the next restart marker.  Of course, the restart markers
-occupy extra space.  We recommend
-.B \-restart 1
-for images that will be transmitted across unreliable networks such as Usenet.
-.PP
-Switches for wizards:
-.TP
-.BI \-scans " file"
-Use the scan script given in the specified text file.
-.PP
-The "wizard" switches are intended for experimentation with JPEG.  If you
-don't know what you are doing, \fBdon't use them\fR.  These switches are
-documented further in the file wizard.doc.
 .SH EXAMPLES
 .LP
 This example converts a baseline JPEG file to progressive form:
@@ -123,6 +197,14 @@ This example converts a baseline JPEG file to progressive form:
 .I foo.jpg
 .B >
 .I fooprog.jpg
+.PP
+This example rotates an image 90 degrees clockwise, discarding any
+unrotatable edge pixels:
+.IP
+.B jpegtran \-rot 90 -trim
+.I foo.jpg
+.B >
+.I foo90.jpg
 .SH ENVIRONMENT
 .TP
 .B JPEGMEM
@@ -147,4 +229,10 @@ Independent JPEG Group
 .SH BUGS
 Arithmetic coding is not supported for legal reasons.
 .PP
-Still not as fast as we'd like.
+The transform options can't transform odd-size images perfectly.  Use
+.B \-trim
+if you don't like the results without it.
+.PP
+The entire image is read into memory and then written out again, even in
+cases where this isn't really necessary.  Expect swapping on large images,
+especially when using the more complex transform options.

jpegtran.c

@@ -1,16 +1,18 @@
 /*
  * jpegtran.c
  *
- * Copyright (C) 1995-1996, Thomas G. Lane.
+ * Copyright (C) 1995-1997, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains a command-line user interface for JPEG transcoding.
  * It is very similar to cjpeg.c, but provides lossless transcoding between
- * different JPEG file formats.
+ * different JPEG file formats.  It also provides some lossless and sort-of-
+ * lossless transformations of JPEG data.
  */
 
 #include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
+#include "transupp.h"		/* Support routines for jpegtran */
 #include "jversion.h"		/* for version message */
 
 #ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
@@ -35,6 +37,8 @@
 
 static const char * progname;	/* program name for error messages */
 static char * outfilename;	/* for -outfile switch */
+static JCOPY_OPTION copyoption;	/* -copy switch */
+static jpeg_transform_info transformoption; /* image transformation options */
 
 
 LOCAL(void)
@@ -49,12 +53,24 @@ usage (void)
 #endif
 
   fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -copy none     Copy no extra markers from source file\n");
+  fprintf(stderr, "  -copy comments Copy only comment markers (default)\n");
+  fprintf(stderr, "  -copy all      Copy all extra markers\n");
 #ifdef ENTROPY_OPT_SUPPORTED
   fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
 #endif
 #ifdef C_PROGRESSIVE_SUPPORTED
   fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
 #endif
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "Switches for modifying the image:\n");
+  fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
+  fprintf(stderr, "  -flip [horizontal|vertical]  Mirror image (left-right or top-bottom)\n");
+  fprintf(stderr, "  -rotate [90|180|270]         Rotate image (degrees clockwise)\n");
+  fprintf(stderr, "  -transpose     Transpose image\n");
+  fprintf(stderr, "  -transverse    Transverse transpose image\n");
+  fprintf(stderr, "  -trim          Drop non-transformable edge blocks\n");
+#endif /* TRANSFORMS_SUPPORTED */
   fprintf(stderr, "Switches for advanced users:\n");
   fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
   fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
@@ -71,6 +87,29 @@ usage (void)
 }
 
 
+LOCAL(void)
+select_transform (JXFORM_CODE transform)
+/* Silly little routine to detect multiple transform options,
+ * which we can't handle.
+ */
+{
+#if TRANSFORMS_SUPPORTED
+  if (transformoption.transform == JXFORM_NONE ||
+      transformoption.transform == transform) {
+    transformoption.transform = transform;
+  } else {
+    fprintf(stderr, "%s: can only do one image transformation at a time\n",
+	    progname);
+    usage();
+  }
+#else
+  fprintf(stderr, "%s: sorry, image transformation was not compiled\n",
+	  progname);
+  exit(EXIT_FAILURE);
+#endif
+}
+
+
 LOCAL(int)
 parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 		int last_file_arg_seen, boolean for_real)
@@ -91,6 +130,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
   /* Set up default JPEG parameters. */
   simple_progressive = FALSE;
   outfilename = NULL;
+  copyoption = JCOPYOPT_DEFAULT;
+  transformoption.transform = JXFORM_NONE;
+  transformoption.trim = FALSE;
+  transformoption.force_grayscale = FALSE;
   cinfo->err->trace_level = 0;
 
   /* Scan command line options, adjust parameters */
@@ -117,6 +160,19 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       exit(EXIT_FAILURE);
 #endif
 
+    } else if (keymatch(arg, "copy", 1)) {
+      /* Select which extra markers to copy. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "none", 1)) {
+	copyoption = JCOPYOPT_NONE;
+      } else if (keymatch(argv[argn], "comments", 1)) {
+	copyoption = JCOPYOPT_COMMENTS;
+      } else if (keymatch(argv[argn], "all", 1)) {
+	copyoption = JCOPYOPT_ALL;
+      } else
+	usage();
+
     } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
       /* Enable debug printouts. */
       /* On first -d, print version identification */
@@ -129,6 +185,25 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       }
       cinfo->err->trace_level++;
 
+    } else if (keymatch(arg, "flip", 1)) {
+      /* Mirror left-right or top-bottom. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "horizontal", 1))
+	select_transform(JXFORM_FLIP_H);
+      else if (keymatch(argv[argn], "vertical", 1))
+	select_transform(JXFORM_FLIP_V);
+      else
+	usage();
+
+    } else if (keymatch(arg, "grayscale", 1) || keymatch(arg, "greyscale",1)) {
+      /* Force to grayscale. */
+#if TRANSFORMS_SUPPORTED
+      transformoption.force_grayscale = TRUE;
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
     } else if (keymatch(arg, "maxmemory", 3)) {
       /* Maximum memory in Kb (or Mb with 'm'). */
       long lval;
@@ -188,7 +263,20 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 	/* restart_interval will be computed during startup */
       }
 
-    } else if (keymatch(arg, "scans", 2)) {
+    } else if (keymatch(arg, "rotate", 2)) {
+      /* Rotate 90, 180, or 270 degrees (measured clockwise). */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (keymatch(argv[argn], "90", 2))
+	select_transform(JXFORM_ROT_90);
+      else if (keymatch(argv[argn], "180", 3))
+	select_transform(JXFORM_ROT_180);
+      else if (keymatch(argv[argn], "270", 3))
+	select_transform(JXFORM_ROT_270);
+      else
+	usage();
+
+    } else if (keymatch(arg, "scans", 1)) {
       /* Set scan script. */
 #ifdef C_MULTISCAN_FILES_SUPPORTED
       if (++argn >= argc)	/* advance to next argument */
@@ -201,6 +289,18 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       exit(EXIT_FAILURE);
 #endif
 
+    } else if (keymatch(arg, "transpose", 1)) {
+      /* Transpose (across UL-to-LR axis). */
+      select_transform(JXFORM_TRANSPOSE);
+
+    } else if (keymatch(arg, "transverse", 6)) {
+      /* Transverse transpose (across UR-to-LL axis). */
+      select_transform(JXFORM_TRANSVERSE);
+
+    } else if (keymatch(arg, "trim", 3)) {
+      /* Trim off any partial edge MCUs that the transform can't handle. */
+      transformoption.trim = TRUE;
+
     } else {
       usage();			/* bogus switch */
     }
@@ -239,7 +339,8 @@ main (int argc, char **argv)
 #ifdef PROGRESS_REPORT
   struct cdjpeg_progress_mgr progress;
 #endif
-  jvirt_barray_ptr * coef_arrays;
+  jvirt_barray_ptr * src_coef_arrays;
+  jvirt_barray_ptr * dst_coef_arrays;
   int file_index;
   FILE * input_file;
   FILE * output_file;
@@ -269,8 +370,10 @@ main (int argc, char **argv)
 
   /* Scan command line to find file names.
    * It is convenient to use just one switch-parsing routine, but the switch
-   * values read here are ignored; we will rescan the switches after opening
-   * the input file.
+   * values read here are mostly ignored; we will rescan the switches after
+   * opening the input file.  Also note that most of the switches affect the
+   * destination JPEG object, so we parse into that and then copy over what
+   * needs to affects the source too.
    */
 
   file_index = parse_switches(&dstinfo, argc, argv, 0, FALSE);
@@ -330,25 +433,54 @@ main (int argc, char **argv)
   /* Specify data source for decompression */
   jpeg_stdio_src(&srcinfo, input_file);
 
+  /* Enable saving of extra markers that we want to copy */
+  jcopy_markers_setup(&srcinfo, copyoption);
+
   /* Read file header */
   (void) jpeg_read_header(&srcinfo, TRUE);
 
+  /* Any space needed by a transform option must be requested before
+   * jpeg_read_coefficients so that memory allocation will be done right.
+   */
+#if TRANSFORMS_SUPPORTED
+  jtransform_request_workspace(&srcinfo, &transformoption);
+#endif
+
   /* Read source file as DCT coefficients */
-  coef_arrays = jpeg_read_coefficients(&srcinfo);
+  src_coef_arrays = jpeg_read_coefficients(&srcinfo);
 
   /* Initialize destination compression parameters from source values */
   jpeg_copy_critical_parameters(&srcinfo, &dstinfo);
 
+  /* Adjust destination parameters if required by transform options;
+   * also find out which set of coefficient arrays will hold the output.
+   */
+#if TRANSFORMS_SUPPORTED
+  dst_coef_arrays = jtransform_adjust_parameters(&srcinfo, &dstinfo,
+						 src_coef_arrays,
+						 &transformoption);
+#else
+  dst_coef_arrays = src_coef_arrays;
+#endif
+
   /* Adjust default compression parameters by re-parsing the options */
   file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
 
   /* Specify data destination for compression */
   jpeg_stdio_dest(&dstinfo, output_file);
 
-  /* Start compressor */
-  jpeg_write_coefficients(&dstinfo, coef_arrays);
+  /* Start compressor (note no image data is actually written here) */
+  jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
 
-  /* ought to copy source comments here... */
+  /* Copy to the output file any extra markers that we want to preserve */
+  jcopy_markers_execute(&srcinfo, &dstinfo, copyoption);
+
+  /* Execute image transformation, if any */
+#if TRANSFORMS_SUPPORTED
+  jtransform_execute_transformation(&srcinfo, &dstinfo,
+				    src_coef_arrays,
+				    &transformoption);
+#endif
 
   /* Finish compression and release memory */
   jpeg_finish_compress(&dstinfo);

jpegut.c

@@ -0,0 +1,387 @@
+/* Copyright (C)2004 Landmark Graphics Corporation
+ * Copyright (C)2005 Sun Microsystems, Inc.
+ * Copyright (C)2009 D. R. Commander
+ *
+ * This library is free software and may be redistributed and/or modified under
+ * the terms of the wxWindows Library License, Version 3.1 or (at your option)
+ * any later version.  The full license is in the LICENSE.txt file included
+ * with this distribution.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * wxWindows Library License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include "./rrtimer.h"
+#include "./turbojpeg.h"
+
+#define _catch(f) {if((f)==-1) {printf("TJPEG: %s\n", tjGetErrorStr());  bailout();}}
+
+const char *_subnamel[NUMSUBOPT]={"4:4:4", "4:2:2", "4:2:0", "GRAY"};
+const char *_subnames[NUMSUBOPT]={"444", "422", "420", "GRAY"};
+
+int exitstatus=0;
+#define bailout() {exitstatus=-1;  goto finally;}
+
+int pixels[9][3]=
+{
+	{0, 255, 0},
+	{255, 0, 255},
+	{255, 255, 0},
+	{0, 0, 255},
+	{0, 255, 255},
+	{255, 0, 0},
+	{255, 255, 255},
+	{0, 0, 0},
+	{255, 0, 0}
+};
+
+void initbuf(unsigned char *buf, int w, int h, int ps, int flags)
+{
+	int roffset=(flags&TJ_BGR)?2:0, goffset=1, boffset=(flags&TJ_BGR)?0:2, i,
+		_i, j;
+	if(flags&TJ_ALPHAFIRST) {roffset++;  goffset++;  boffset++;}
+	memset(buf, 0, w*h*ps);
+	for(_i=0; _i<16; _i++)
+	{
+		if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+		for(j=0; j<w; j++)
+		{
+			buf[(w*i+j)*ps+roffset]=255;
+			if(((_i/8)+(j/8))%2==0)
+			{
+				buf[(w*i+j)*ps+goffset]=255;
+				buf[(w*i+j)*ps+boffset]=255;
+			}
+		}
+	}
+	for(_i=16; _i<h; _i++)
+	{
+		if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+		for(j=0; j<w; j++)
+		{
+			if(((_i/8)+(j/8))%2!=0)
+			{
+				buf[(w*i+j)*ps+roffset]=255;
+				buf[(w*i+j)*ps+goffset]=255;
+			}
+		}
+	}
+}
+
+void dumpbuf(unsigned char *buf, int w, int h, int ps, int flags)
+{
+	int roffset=(flags&TJ_BGR)?2:0, goffset=1, boffset=(flags&TJ_BGR)?0:2, i,
+		j;
+	for(i=0; i<h; i++)
+	{
+		for(j=0; j<w; j++)
+		{
+			printf("%.3d/%.3d/%.3d ", buf[(w*i+j)*ps+roffset],
+				buf[(w*i+j)*ps+roffset], buf[(w*i+j)*ps+roffset]);
+		}
+		printf("\n");
+	}
+}
+
+int checkbuf(unsigned char *buf, int w, int h, int ps, int subsamp, int flags)
+{
+	int roffset=(flags&TJ_BGR)?2:0, goffset=1, boffset=(flags&TJ_BGR)?0:2, i,
+		_i, j;
+	if(flags&TJ_ALPHAFIRST) {roffset++;  goffset++;  boffset++;}
+	if(subsamp==TJ_GRAYSCALE)
+	{
+		for(_i=0; _i<16; _i++)
+		{
+			if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+			for(j=0; j<w; j++)
+			{
+				unsigned char r=buf[(w*i+j)*ps+roffset],
+					g=buf[(w*i+j)*ps+goffset],
+					b=buf[(w*i+j)*ps+boffset];
+				if(((_i/8)+(j/8))%2==0)
+				{
+					if(r<253 || g<253 || b<253) return 0;
+				}
+				else
+				{
+					if(r<74 || r>78 || g<74 || g>78 || b<74 || b>78) return 0;
+				}
+			}
+		}
+		for(_i=16; _i<h; _i++)
+		{
+			if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+			for(j=0; j<w; j++)
+			{
+				unsigned char r=buf[(w*i+j)*ps+roffset],
+					g=buf[(w*i+j)*ps+goffset],
+					b=buf[(w*i+j)*ps+boffset];
+				if(((_i/8)+(j/8))%2==0)
+				{
+					if(r>2 || g>2 || b>2) return 0;
+				}
+				else
+				{
+					if(r<224 || r>228 || g<224 || g>228 || b<224 || b>228) return 0;
+				}
+			}
+		}
+	}
+	else
+	{
+		for(_i=0; _i<16; _i++)
+		{
+			if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+			for(j=0; j<w; j++)
+			{
+				if(buf[(w*i+j)*ps+roffset]<253) return 0;
+				if(((_i/8)+(j/8))%2==0)
+				{
+					if(buf[(w*i+j)*ps+goffset]<253) return 0;
+					if(buf[(w*i+j)*ps+boffset]<253) return 0;
+				}
+				else
+				{
+					if(buf[(w*i+j)*ps+goffset]>2) return 0;
+					if(buf[(w*i+j)*ps+boffset]>2) return 0;
+				}
+			}
+		}
+		for(_i=16; _i<h; _i++)
+		{
+			if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+			for(j=0; j<w; j++)
+			{
+				if(buf[(w*i+j)*ps+boffset]>2) return 0;
+				if(((_i/8)+(j/8))%2==0)
+				{
+					if(buf[(w*i+j)*ps+roffset]>2) return 0;
+					if(buf[(w*i+j)*ps+goffset]>2) return 0;
+				}
+				else
+				{
+					if(buf[(w*i+j)*ps+roffset]<253) return 0;
+					if(buf[(w*i+j)*ps+goffset]<253) return 0;
+				}
+			}
+		}
+	}
+	return 1;
+}
+
+void writejpeg(unsigned char *jpegbuf, unsigned long jpgbufsize, char *filename)
+{
+	FILE *outfile=NULL;
+	if((outfile=fopen(filename, "wb"))==NULL)
+	{
+		printf("ERROR: Could not open %s for writing.\n", filename);
+		bailout();
+	}
+	if(fwrite(jpegbuf, jpgbufsize, 1, outfile)!=1)
+	{
+		printf("ERROR: Could not write to %s.\n", filename);
+		bailout();
+	}
+
+	finally:
+	if(outfile) fclose(outfile);
+}
+
+void gentestjpeg(tjhandle hnd, unsigned char *jpegbuf, unsigned long *size,
+	int w, int h, int ps, char *basefilename, int subsamp, int qual, int flags)
+{
+	char tempstr[1024];  unsigned char *bmpbuf=NULL;
+	const char *pixformat;  double t;
+
+	if(flags&TJ_BGR)
+	{
+		if(ps==3) pixformat="BGR";
+		else {if(flags&TJ_ALPHAFIRST) pixformat="ABGR";  else pixformat="BGRA";}
+	}
+	else
+	{
+		if(ps==3) pixformat="RGB";
+		else {if(flags&TJ_ALPHAFIRST) pixformat="ARGB";  else pixformat="RGBA";}
+	}
+	printf("%s %s -> %s Q%d ... ", pixformat,
+		(flags&TJ_BOTTOMUP)?"Bottom-Up":"Top-Down ", _subnamel[subsamp], qual);
+
+	if((bmpbuf=(unsigned char *)malloc(w*h*ps+1))==NULL)
+	{
+		printf("ERROR: Could not allocate buffer\n");  bailout();
+	}
+	initbuf(bmpbuf, w, h, ps, flags);
+	memset(jpegbuf, 0, TJBUFSIZE(w, h));
+
+	t=rrtime();
+	_catch(tjCompress(hnd, bmpbuf, w, 0, h, ps, jpegbuf, size, subsamp, qual, flags));
+	t=rrtime()-t;
+
+	sprintf(tempstr, "%s_enc_%s_%s_%sQ%d.jpg", basefilename, pixformat,
+		(flags&TJ_BOTTOMUP)? "BU":"TD", _subnames[subsamp], qual);
+	writejpeg(jpegbuf, *size, tempstr);
+	printf("Done.  %f ms\n  Result in %s\n", t*1000., tempstr);
+
+	finally:
+	if(bmpbuf) free(bmpbuf);
+}
+
+void gentestbmp(tjhandle hnd, unsigned char *jpegbuf, unsigned long jpegsize,
+	int w, int h, int ps, char *basefilename, int subsamp, int qual, int flags)
+{
+	unsigned char *bmpbuf=NULL;
+	const char *pixformat;  int _w=0, _h=0;  double t;
+
+	if(flags&TJ_BGR)
+	{
+		if(ps==3) pixformat="BGR";
+		else {if(flags&TJ_ALPHAFIRST) pixformat="ABGR";  else pixformat="BGRA";}
+	}
+	else
+	{
+		if(ps==3) pixformat="RGB";
+		else {if(flags&TJ_ALPHAFIRST) pixformat="ARGB";  else pixformat="RGBA";}
+	}
+	printf("JPEG -> %s %s ... ", pixformat, (flags&TJ_BOTTOMUP)?"Bottom-Up":"Top-Down ");
+
+	_catch(tjDecompressHeader(hnd, jpegbuf, jpegsize, &_w, &_h));
+	if(_w!=w || _h!=h)
+	{
+		printf("Incorrect JPEG header\n");  bailout();
+	}
+
+	if((bmpbuf=(unsigned char *)malloc(w*h*ps+1))==NULL)
+	{
+		printf("ERROR: Could not allocate buffer\n");  bailout();
+	}
+	memset(bmpbuf, 0, w*ps*h);
+
+	t=rrtime();
+	_catch(tjDecompress(hnd, jpegbuf, jpegsize, bmpbuf, w, w*ps, h, ps, flags));
+	t=rrtime()-t;
+
+	if(checkbuf(bmpbuf, w, h, ps, subsamp, flags)) printf("Passed.");
+	else {printf("FAILED!");  dumpbuf(bmpbuf, w, h, ps, flags);}
+
+	printf("  %f ms\n\n", t*1000.);
+
+	finally:
+	if(bmpbuf) free(bmpbuf);
+}
+
+void dotest(int w, int h, int ps, int subsamp, char *basefilename)
+{
+	tjhandle hnd=NULL, dhnd=NULL;  unsigned char *jpegbuf=NULL;
+	unsigned long size;
+
+	if((jpegbuf=(unsigned char *)malloc(TJBUFSIZE(w, h))) == NULL)
+	{
+		puts("ERROR: Could not allocate buffer.");  bailout();
+	}
+
+	if((hnd=tjInitCompress())==NULL)
+		{printf("Error in tjInitCompress():\n%s\n", tjGetErrorStr());  bailout();}
+	if((dhnd=tjInitDecompress())==NULL)
+		{printf("Error in tjInitDecompress():\n%s\n", tjGetErrorStr());  bailout();}
+
+	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, 0);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, 0);
+
+	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_BGR);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_BGR);
+
+	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_BOTTOMUP);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_BOTTOMUP);
+
+	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_BGR|TJ_BOTTOMUP);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_BGR|TJ_BOTTOMUP);
+
+	if(ps==4)
+	{
+		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST);
+
+		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR);
+
+		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BOTTOMUP);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BOTTOMUP);
+
+		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR|TJ_BOTTOMUP);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR|TJ_BOTTOMUP);
+	}
+
+	finally:
+	if(hnd) tjDestroy(hnd);
+	if(dhnd) tjDestroy(dhnd);
+
+	if(jpegbuf) free(jpegbuf);
+}
+
+#define MAXLENGTH 2048
+
+void dotest1(void)
+{
+	int i, j, i2;  unsigned char *bmpbuf=NULL, *jpgbuf=NULL;
+	tjhandle hnd=NULL;  unsigned long size;
+	if((hnd=tjInitCompress())==NULL)
+		{printf("Error in tjInitCompress():\n%s\n", tjGetErrorStr());  bailout();}
+	printf("Buffer size regression test\n");
+	for(j=1; j<48; j++)
+	{
+		for(i=1; i<(j==1?MAXLENGTH:48); i++)
+		{
+			if(i%100==0) printf("%.4d x %.4d\b\b\b\b\b\b\b\b\b\b\b", i, j);
+			if((bmpbuf=(unsigned char *)malloc(i*j*4))==NULL
+			|| (jpgbuf=(unsigned char *)malloc(TJBUFSIZE(i, j)))==NULL)
+			{
+				printf("Memory allocation failure\n");  bailout();
+			}
+			memset(bmpbuf, 0, i*j*4);
+			for(i2=0; i2<i*j; i2++)
+			{
+				bmpbuf[i2*4]=pixels[i2%9][2];
+				bmpbuf[i2*4+1]=pixels[i2%9][1];
+				bmpbuf[i2*2+2]=pixels[i2%9][0];
+			}
+			_catch(tjCompress(hnd, bmpbuf, i, i*4, j, 4,
+				jpgbuf, &size, TJ_444, 100, TJ_BGR));
+			free(bmpbuf);  bmpbuf=NULL;  free(jpgbuf);  jpgbuf=NULL;
+
+			if((bmpbuf=(unsigned char *)malloc(j*i*4))==NULL
+			|| (jpgbuf=(unsigned char *)malloc(TJBUFSIZE(j, i)))==NULL)
+			{
+				printf("Memory allocation failure\n");  bailout();
+			}
+			for(i2=0; i2<j*i*4; i2++)
+			{
+				if(i2%2==0) bmpbuf[i2]=0xFF;
+				else bmpbuf[i2]=0;
+			}
+			_catch(tjCompress(hnd, bmpbuf, j, j*4, i, 4,
+				jpgbuf, &size, TJ_444, 100, TJ_BGR));
+			free(bmpbuf);  bmpbuf=NULL;  free(jpgbuf);  jpgbuf=NULL;
+		}
+	}
+	printf("Done.      \n");
+
+	finally:
+	if(bmpbuf) free(bmpbuf);  if(jpgbuf) free(jpgbuf);
+	if(hnd) tjDestroy(hnd);
+}
+
+int main(int argc, char *argv[])
+{
+	dotest(35, 41, 3, TJ_444, "test");
+	dotest(35, 41, 4, TJ_444, "test");
+	dotest(35, 41, 3, TJ_GRAYSCALE, "test");
+	dotest(35, 41, 4, TJ_GRAYSCALE, "test");
+	dotest1();
+
+	return exitstatus;
+}

jpgtest.cxx

@@ -0,0 +1,392 @@
+/* Copyright (C)2004 Landmark Graphics Corporation
+ * Copyright (C)2005, 2006 Sun Microsystems, Inc.
+ * Copyright (C)2009 D. R. Commander
+ *
+ * This library is free software and may be redistributed and/or modified under
+ * the terms of the wxWindows Library License, Version 3.1 or (at your option)
+ * any later version.  The full license is in the LICENSE.txt file included
+ * with this distribution.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * wxWindows Library License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+#include "./bmp.h"
+#include "./rrutil.h"
+#include "./rrtimer.h"
+#include "./turbojpeg.h"
+
+#define _catch(f) {if((f)==-1) {printf("Error in %s:\n%s\n", #f, tjGetErrorStr());  goto bailout;}}
+
+int forcemmx=0, forcesse=0, forcesse2=0, forcesse3=0, fastupsample=0;
+const int _ps[BMPPIXELFORMATS]={3, 4, 3, 4, 4, 4};
+const int _flags[BMPPIXELFORMATS]={0, 0, TJ_BGR, TJ_BGR,
+	TJ_BGR|TJ_ALPHAFIRST, TJ_ALPHAFIRST};
+const int _rindex[BMPPIXELFORMATS]={0, 0, 2, 2, 3, 1};
+const int _gindex[BMPPIXELFORMATS]={1, 1, 1, 1, 2, 2};
+const int _bindex[BMPPIXELFORMATS]={2, 2, 0, 0, 1, 3};
+const char *_pfname[]={"RGB", "RGBA", "BGR", "BGRA", "ABGR", "ARGB"};
+const char *_subnamel[NUMSUBOPT]={"4:4:4", "4:2:2", "4:2:0", "GRAY"};
+const char *_subnames[NUMSUBOPT]={"444", "422", "420", "GRAY"};
+
+void printsigfig(double val, int figs)
+{
+	char format[80];
+	double _l=log10(val);  int l;
+	if(_l<0.)
+	{
+		l=(int)fabs(_l);
+		sprintf(format, "%%%d.%df", figs+l+2, figs+l);
+	}
+	else
+	{
+		l=(int)_l+1;
+		if(figs<=l) sprintf(format, "%%.0f");
+		else sprintf(format, "%%%d.%df", figs+1, figs-l);
+	}	
+	printf(format, val);
+}
+
+void dotest(unsigned char *srcbuf, int w, int h, BMPPIXELFORMAT pf, int bu,
+	int jpegsub, int qual, char *filename, int dotile, int useppm, int quiet)
+{
+	char tempstr[1024];
+	FILE *outfile;  tjhandle hnd;
+	unsigned char **jpegbuf=NULL, *rgbbuf=NULL;
+	rrtimer timer; double elapsed;
+	int jpgbufsize=0, i, j, tilesizex, tilesizey, numtilesx, numtilesy, ITER;
+	unsigned long *comptilesize=NULL;
+	int flags=(forcemmx?TJ_FORCEMMX:0)|(forcesse?TJ_FORCESSE:0)
+		|(forcesse2?TJ_FORCESSE2:0)|(forcesse3?TJ_FORCESSE3:0)
+		|(fastupsample?TJ_FASTUPSAMPLE:0);
+	int ps=_ps[pf];
+	int pitch=w*ps;
+
+	flags |= _flags[pf];
+	if(bu) flags |= TJ_BOTTOMUP;
+
+	if((rgbbuf=(unsigned char *)malloc(pitch*h)) == NULL)
+	{
+		puts("ERROR: Could not allocate image buffer.");
+		exit(1);
+	}
+
+	if(!quiet) printf("\n>>>>>  %s (%s) <--> JPEG %s Q%d  <<<<<\n", _pfname[pf],
+		bu?"Bottom-up":"Top-down", _subnamel[jpegsub], qual);
+	if(dotile) {tilesizex=tilesizey=4;}  else {tilesizex=w;  tilesizey=h;}
+
+	do
+	{
+		tilesizex*=2;  if(tilesizex>w) tilesizex=w;
+		tilesizey*=2;  if(tilesizey>h) tilesizey=h;
+		numtilesx=(w+tilesizex-1)/tilesizex;
+		numtilesy=(h+tilesizey-1)/tilesizey;
+		if((comptilesize=(unsigned long *)malloc(sizeof(unsigned long)*numtilesx*numtilesy)) == NULL
+		|| (jpegbuf=(unsigned char **)malloc(sizeof(unsigned char *)*numtilesx*numtilesy)) == NULL)
+		{
+			puts("ERROR: Could not allocate image buffers.");
+			goto bailout;
+		}
+		memset(jpegbuf, 0, sizeof(unsigned char *)*numtilesx*numtilesy);
+		for(i=0; i<numtilesx*numtilesy; i++)
+		{
+			if((jpegbuf[i]=(unsigned char *)malloc(TJBUFSIZE(tilesizex, tilesizey))) == NULL)
+			{
+				puts("ERROR: Could not allocate image buffers.");
+				goto bailout;
+			}
+		}
+
+		// Compression test
+		if(quiet) printf("%s\t%s\t%s\t%d\t",  _pfname[pf], bu?"BU":"TD",
+			_subnamel[jpegsub], qual);
+		for(i=0; i<h; i++) memcpy(&rgbbuf[pitch*i], &srcbuf[w*ps*i], w*ps);
+		if((hnd=tjInitCompress())==NULL)
+		{
+			printf("Error in tjInitCompress():\n%s\n", tjGetErrorStr());
+			goto bailout;
+		}
+		_catch(tjCompress(hnd, rgbbuf, tilesizex, pitch, tilesizey, ps,
+			jpegbuf[0], &comptilesize[0], jpegsub, qual, flags));
+		ITER=0;
+		timer.start();
+		do
+		{
+			jpgbufsize=0;  int tilen=0;
+			for(i=0; i<h; i+=tilesizey)
+			{
+				for(j=0; j<w; j+=tilesizex)
+				{
+					int tempw=min(tilesizex, w-j), temph=min(tilesizey, h-i);
+					_catch(tjCompress(hnd, &rgbbuf[pitch*i+j*ps], tempw, pitch,
+						temph, ps, jpegbuf[tilen], &comptilesize[tilen], jpegsub, qual,
+						flags));
+					jpgbufsize+=comptilesize[tilen];
+					tilen++;
+				}
+			}
+			ITER++;
+		} while((elapsed=timer.elapsed())<5.);
+		_catch(tjDestroy(hnd));
+		if(quiet)
+		{
+			if(tilesizex==w && tilesizey==h) printf("Full     \t");
+			else printf("%-4d %-4d\t", tilesizex, tilesizey);
+			printsigfig((double)(w*h)/1000000.*(double)ITER/elapsed, 4);
+			printf("\t");
+			printsigfig((double)(w*h*ps)/(double)jpgbufsize, 4);
+			printf("\t");
+		}
+		else
+		{
+			if(tilesizex==w && tilesizey==h) printf("\nFull image\n");
+			else printf("\nTile size: %d x %d\n", tilesizex, tilesizey);
+			printf("C--> Frame rate:           %f fps\n", (double)ITER/elapsed);
+			printf("     Output image size:    %d bytes\n", jpgbufsize);
+			printf("     Compression ratio:    %f:1\n",
+				(double)(w*h*ps)/(double)jpgbufsize);
+			printf("     Source throughput:    %f Megapixels/sec\n",
+				(double)(w*h)/1000000.*(double)ITER/elapsed);
+			printf("     Output bit stream:    %f Megabits/sec\n",
+				(double)jpgbufsize*8./1000000.*(double)ITER/elapsed);
+		}
+		if(tilesizex==w && tilesizey==h)
+		{
+			sprintf(tempstr, "%s_%sQ%d.jpg", filename, _subnames[jpegsub], qual);
+			if((outfile=fopen(tempstr, "wb"))==NULL)
+			{
+				puts("ERROR: Could not open reference image");
+				exit(1);
+			}
+			if(fwrite(jpegbuf[0], jpgbufsize, 1, outfile)!=1)
+			{
+				puts("ERROR: Could not write reference image");
+				exit(1);
+			}
+			fclose(outfile);
+			if(!quiet) printf("Reference image written to %s\n", tempstr);
+		}
+
+		// Decompression test
+		memset(rgbbuf, 127, pitch*h);  // Grey image means decompressor did nothing
+		if((hnd=tjInitDecompress())==NULL)
+		{
+			printf("Error in tjInitDecompress():\n%s\n", tjGetErrorStr());
+			goto bailout;
+		}
+		_catch(tjDecompress(hnd, jpegbuf[0], jpgbufsize, rgbbuf, tilesizex, pitch,
+			tilesizey, ps, flags));
+		ITER=0;
+		timer.start();
+		do
+		{
+			int tilen=0;
+			for(i=0; i<h; i+=tilesizey)
+			{
+				for(j=0; j<w; j+=tilesizex)
+				{
+					int tempw=min(tilesizex, w-j), temph=min(tilesizey, h-i);
+					_catch(tjDecompress(hnd, jpegbuf[tilen], comptilesize[tilen],
+						&rgbbuf[pitch*i+ps*j], tempw, pitch, temph, ps, flags));
+					tilen++;
+				}
+			}
+			ITER++;
+		}	while((elapsed=timer.elapsed())<5.);
+		_catch(tjDestroy(hnd));
+		if(quiet)
+		{
+			printsigfig((double)(w*h)/1000000.*(double)ITER/elapsed, 4);
+			printf("\n");
+		}
+		else
+		{
+			printf("D--> Frame rate:           %f fps\n", (double)ITER/elapsed);
+			printf("     Dest. throughput:     %f Megapixels/sec\n",
+				(double)(w*h)/1000000.*(double)ITER/elapsed);
+		}
+		if(tilesizex==w && tilesizey==h)
+			sprintf(tempstr, "%s_%sQ%d_full.%s", filename, _subnames[jpegsub], qual,
+				useppm?"ppm":"bmp");
+		else sprintf(tempstr, "%s_%sQ%d_%dx%d.%s", filename, _subnames[jpegsub],
+			qual, tilesizex, tilesizey, useppm?"ppm":"bmp");
+		if(savebmp(tempstr, rgbbuf, w, h, pf, pitch, bu)==-1)
+		{
+			printf("ERROR saving bitmap: %s\n", bmpgeterr());
+			goto bailout;
+		}
+		sprintf(strrchr(tempstr, '.'), "-err.%s", useppm?"ppm":"bmp");
+		if(!quiet)
+			printf("Computing compression error and saving to %s.\n", tempstr);
+		if(jpegsub==TJ_GRAYSCALE)
+		{
+			for(j=0; j<h; j++)
+			{
+				for(i=0; i<w*ps; i+=ps)
+				{
+					int y=(int)((double)srcbuf[w*ps*j+i+_rindex[pf]]*0.299
+						+ (double)srcbuf[w*ps*j+i+_gindex[pf]]*0.587
+						+ (double)srcbuf[w*ps*j+i+_bindex[pf]]*0.114 + 0.5);
+					if(y>255) y=255;  if(y<0) y=0;
+					rgbbuf[pitch*j+i+_rindex[pf]]=abs(rgbbuf[pitch*j+i+_rindex[pf]]-y);
+					rgbbuf[pitch*j+i+_gindex[pf]]=abs(rgbbuf[pitch*j+i+_gindex[pf]]-y);
+					rgbbuf[pitch*j+i+_bindex[pf]]=abs(rgbbuf[pitch*j+i+_bindex[pf]]-y);
+				}
+			}
+		}		
+		else
+		{
+			for(j=0; j<h; j++) for(i=0; i<w*ps; i++)
+				rgbbuf[pitch*j+i]=abs(rgbbuf[pitch*j+i]-srcbuf[w*ps*j+i]);
+		}
+		if(savebmp(tempstr, rgbbuf, w, h, pf, pitch, bu)==-1)
+		{
+			printf("ERROR saving bitmap: %s\n", bmpgeterr());
+			goto bailout;
+		}
+
+		// Cleanup
+		if(jpegbuf)
+		{
+			for(i=0; i<numtilesx*numtilesy; i++)
+				{if(jpegbuf[i]) free(jpegbuf[i]);  jpegbuf[i]=NULL;}
+			free(jpegbuf);  jpegbuf=NULL;
+		}
+		if(comptilesize) {free(comptilesize);  comptilesize=NULL;}
+	} while(tilesizex<w || tilesizey<h);
+
+	if(rgbbuf) {free(rgbbuf);  rgbbuf=NULL;}
+	return;
+
+	bailout:
+	if(jpegbuf)
+	{
+		for(i=0; i<numtilesx*numtilesy; i++)
+			{if(jpegbuf[i]) free(jpegbuf[i]);  jpegbuf[i]=NULL;}
+		free(jpegbuf);  jpegbuf=NULL;
+	}
+	if(comptilesize) {free(comptilesize);  comptilesize=NULL;}
+	if(rgbbuf) {free(rgbbuf);  rgbbuf=NULL;}
+	return;
+}
+
+
+int main(int argc, char *argv[])
+{
+	unsigned char *bmpbuf=NULL;  int w, h, i, useppm=0;
+	int qual, dotile=0, quiet=0, hiqual=-1;  char *temp;
+	BMPPIXELFORMAT pf=BMP_BGR;
+	int bu=0;
+
+	printf("\n");
+
+	if(argc<3)
+	{
+		printf("USAGE: %s <Inputfile (BMP|PPM)> <%% Quality>\n\n", argv[0]);
+		printf("       [-tile]\n");
+		printf("       Test performance of the codec when the image is encoded\n");
+		printf("       as separate tiles of varying sizes.\n\n");
+		printf("       [-forcemmx] [-forcesse] [-forcesse2] [-forcesse3]\n");
+		printf("       Force MMX, SSE, or SSE2 code paths in Intel codec\n\n");
+		printf("       [-rgb | -bgr | -rgba | -bgra | -abgr | -argb]\n");
+		printf("       Test the specified color conversion path in the codec (default: BGR)\n\n");
+		printf("       [-fastupsample]\n");
+		printf("       Use fast, inaccurate upsampling code to perform 4:2:2 and 4:2:0\n");
+		printf("       YUV decoding in libjpeg decompressor\n\n");
+		printf("       [-quiet]\n");
+		printf("       Output in tabular rather than verbose format\n\n");
+		printf("       NOTE: If the quality is specified as a range, i.e. 90-100, a separate\n");
+		printf("       test will be performed for all quality values in the range.\n");
+		exit(1);
+	}
+	if((qual=atoi(argv[2]))<1 || qual>100)
+	{
+		puts("ERROR: Quality must be between 1 and 100.");
+		exit(1);
+	}
+	if((temp=strchr(argv[2], '-'))!=NULL && strlen(temp)>1
+		&& sscanf(&temp[1], "%d", &hiqual)==1 && hiqual>qual && hiqual>=1
+		&& hiqual<=100) {}
+	else hiqual=qual;
+
+	if(argc>3)
+	{
+		for(i=3; i<argc; i++)
+		{
+			if(!stricmp(argv[i], "-tile")) dotile=1;
+			if(!stricmp(argv[i], "-forcesse3"))
+			{
+				printf("Using SSE3 code\n");
+				forcesse3=1;
+			}
+			if(!stricmp(argv[i], "-forcesse2"))
+			{
+				printf("Using SSE2 code\n");
+				forcesse2=1;
+			}
+			if(!stricmp(argv[i], "-forcesse"))
+			{
+				printf("Using SSE code\n");
+				forcesse=1;
+			}
+			if(!stricmp(argv[i], "-forcemmx"))
+			{
+				printf("Using MMX code\n");
+				forcemmx=1;
+			}
+			if(!stricmp(argv[i], "-fastupsample"))
+			{
+				printf("Using fast upsampling code\n");
+				fastupsample=1;
+			}
+			if(!stricmp(argv[i], "-rgb")) pf=BMP_RGB;
+			if(!stricmp(argv[i], "-rgba")) pf=BMP_RGBA;
+			if(!stricmp(argv[i], "-bgr")) pf=BMP_BGR;
+			if(!stricmp(argv[i], "-bgra")) pf=BMP_BGRA;
+			if(!stricmp(argv[i], "-abgr")) pf=BMP_ABGR;
+			if(!stricmp(argv[i], "-argb")) pf=BMP_ARGB;
+			if(!stricmp(argv[i], "-bottomup")) bu=1;
+			if(!stricmp(argv[i], "-quiet")) quiet=1;
+		}
+	}
+
+	if(loadbmp(argv[1], &bmpbuf, &w, &h, pf, 1, bu)==-1)
+	{
+		printf("ERROR loading bitmap: %s\n", bmpgeterr());  exit(1);
+	}
+
+	temp=strrchr(argv[1], '.');
+	if(temp!=NULL)
+	{
+		if(!stricmp(temp, ".ppm")) useppm=1;
+		*temp='\0';
+	}
+
+	if(quiet)
+	{
+		printf("All performance values in Mpixels/sec\n\n");
+		printf("Bitmap\tBitmap\tJPEG\tJPEG\tTile Size\tCompr\tCompr\tDecomp\n");
+		printf("Format\tOrder\tFormat\tQual\t X    Y  \tPerf \tRatio\tPerf\n\n");
+	}
+
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_GRAYSCALE, i, argv[1], dotile, useppm, quiet);
+	if(quiet) printf("\n");
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_420, i, argv[1], dotile, useppm, quiet);
+	if(quiet) printf("\n");
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_422, i, argv[1], dotile, useppm, quiet);
+	if(quiet) printf("\n");
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_444, i, argv[1], dotile, useppm, quiet);
+
+	if(bmpbuf) free(bmpbuf);
+	return 0;
+}

jquant1.c

@@ -2,6 +2,7 @@
  * jquant1.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 2009, D. R. Commander
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -193,7 +194,10 @@ select_ncolors (j_decompress_ptr cinfo, int Ncolors[])
   int total_colors, iroot, i, j;
   boolean changed;
   long temp;
-  static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE };
+  int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE };
+  RGB_order[0] = rgb_green[cinfo->out_color_space];
+  RGB_order[1] = rgb_red[cinfo->out_color_space];
+  RGB_order[2] = rgb_blue[cinfo->out_color_space];
 
   /* We can allocate at least the nc'th root of max_colors per component. */
   /* Compute floor(nc'th root of max_colors). */

jquant2.c

@@ -2,6 +2,7 @@
  * jquant2.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 2009, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -74,29 +75,10 @@
 #define G_SCALE 3		/* scale G distances by this much */
 #define B_SCALE 1		/* and B by this much */
 
-/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined
- * in jmorecfg.h.  As the code stands, it will do the right thing for R,G,B
- * and B,G,R orders.  If you define some other weird order in jmorecfg.h,
- * you'll get compile errors until you extend this logic.  In that case
- * you'll probably want to tweak the histogram sizes too.
- */
-
-#if RGB_RED == 0
-#define C0_SCALE R_SCALE
-#endif
-#if RGB_BLUE == 0
-#define C0_SCALE B_SCALE
-#endif
-#if RGB_GREEN == 1
-#define C1_SCALE G_SCALE
-#endif
-#if RGB_RED == 2
-#define C2_SCALE R_SCALE
-#endif
-#if RGB_BLUE == 2
-#define C2_SCALE B_SCALE
-#endif
-
+static const int c_scales[3]={R_SCALE, G_SCALE, B_SCALE};
+#define C0_SCALE c_scales[rgb_red[cinfo->out_color_space]]
+#define C1_SCALE c_scales[rgb_green[cinfo->out_color_space]]
+#define C2_SCALE c_scales[rgb_blue[cinfo->out_color_space]]
 
 /*
  * First we have the histogram data structure and routines for creating it.
@@ -454,15 +436,16 @@ median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes,
     /* We want to break any ties in favor of green, then red, blue last.
      * This code does the right thing for R,G,B or B,G,R color orders only.
      */
-#if RGB_RED == 0
-    cmax = c1; n = 1;
-    if (c0 > cmax) { cmax = c0; n = 0; }
-    if (c2 > cmax) { n = 2; }
-#else
-    cmax = c1; n = 1;
-    if (c2 > cmax) { cmax = c2; n = 2; }
-    if (c0 > cmax) { n = 0; }
-#endif
+    if (rgb_red[cinfo->out_color_space] == 0) {
+      cmax = c1; n = 1;
+      if (c0 > cmax) { cmax = c0; n = 0; }
+      if (c2 > cmax) { n = 2; }
+    }
+    else {
+      cmax = c1; n = 1;
+      if (c2 > cmax) { cmax = c2; n = 2; }
+      if (c0 > cmax) { n = 0; }
+    }
     /* Choose split point along selected axis, and update box bounds.
      * Current algorithm: split at halfway point.
      * (Since the box has been shrunk to minimum volume,

jsimd.h

@@ -0,0 +1,89 @@
+/*
+ * jsimd.h
+ *
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * 
+ * Based on the x86 SIMD extension for IJG JPEG library,
+ * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ *
+ */
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jsimd_can_rgb_ycc                 jSCanRgbYcc
+#define jsimd_can_ycc_rgb                 jSCanYccRgb
+#define jsimd_rgb_ycc_convert             jSRgbYccConv
+#define jsimd_ycc_rgb_convert             jSYccRgbConv
+#define jsimd_can_h2v2_downsample         jSCanH2V2Down
+#define jsimd_can_h2v1_downsample         jSCanH2V1Down
+#define jsimd_h2v2_downsample             jSH2V2Down
+#define jsimd_h2v1_downsample             jSH2V1Down
+#define jsimd_can_h2v2_upsample           jSCanH2V2Up
+#define jsimd_can_h2v1_upsample           jSCanH2V1Up
+#define jsimd_h2v2_upsample               jSH2V2Up
+#define jsimd_h2v1_upsample               jSH2V1Up
+#define jsimd_can_h2v2_fancy_upsample     jSCanH2V2FUp
+#define jsimd_can_h2v1_fancy_upsample     jSCanH2V1FUp
+#define jsimd_h2v2_fancy_upsample         jSH2V2FUp
+#define jsimd_h2v1_fancy_upsample         jSH2V1FUp
+#define jsimd_can_h2v2_merged_upsample    jSCanH2V2MUp
+#define jsimd_can_h2v1_merged_upsample    jSCanH2V1MUp
+#define jsimd_h2v2_merged_upsample        jSH2V2MUp
+#define jsimd_h2v1_merged_upsample        jSH2V1MUp
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+EXTERN(int) jsimd_can_rgb_ycc JPP((void));
+EXTERN(int) jsimd_can_ycc_rgb JPP((void));
+
+EXTERN(void) jsimd_rgb_ycc_convert
+        JPP((j_compress_ptr cinfo,
+             JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+             JDIMENSION output_row, int num_rows));
+EXTERN(void) jsimd_ycc_rgb_convert
+        JPP((j_decompress_ptr cinfo,
+             JSAMPIMAGE input_buf, JDIMENSION input_row,
+             JSAMPARRAY output_buf, int num_rows));
+
+EXTERN(int) jsimd_can_h2v2_downsample JPP((void));
+EXTERN(int) jsimd_can_h2v1_downsample JPP((void));
+
+EXTERN(void) jsimd_h2v2_downsample
+        JPP((j_compress_ptr cinfo, jpeg_component_info * compptr,
+             JSAMPARRAY input_data, JSAMPARRAY output_data));
+EXTERN(void) jsimd_h2v1_downsample
+        JPP((j_compress_ptr cinfo, jpeg_component_info * compptr,
+             JSAMPARRAY input_data, JSAMPARRAY output_data));
+
+EXTERN(int) jsimd_can_h2v2_upsample JPP((void));
+EXTERN(int) jsimd_can_h2v1_upsample JPP((void));
+
+EXTERN(void) jsimd_h2v2_upsample
+        JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+             JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr));
+EXTERN(void) jsimd_h2v1_upsample
+        JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+             JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr));
+
+EXTERN(int) jsimd_can_h2v2_fancy_upsample JPP((void));
+EXTERN(int) jsimd_can_h2v1_fancy_upsample JPP((void));
+
+EXTERN(void) jsimd_h2v2_fancy_upsample
+        JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+             JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr));
+EXTERN(void) jsimd_h2v1_fancy_upsample
+        JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+             JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr));
+
+EXTERN(int) jsimd_can_h2v2_merged_upsample JPP((void));
+EXTERN(int) jsimd_can_h2v1_merged_upsample JPP((void));
+
+EXTERN(void) jsimd_h2v2_merged_upsample
+        JPP((j_decompress_ptr cinfo,
+             JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
+             JSAMPARRAY output_buf));
+EXTERN(void) jsimd_h2v1_merged_upsample
+        JPP((j_decompress_ptr cinfo,
+             JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr,
+             JSAMPARRAY output_buf));
+

jsimd_none.c

@@ -0,0 +1,299 @@
+/*
+ * jsimd_none.c
+ *
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright 2009 D. R. Commander
+ * 
+ * Based on the x86 SIMD extension for IJG JPEG library,
+ * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ *
+ * This file contains stubs for when there is no SIMD support available.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jsimd.h"
+#include "jdct.h"
+#include "jsimddct.h"
+
+GLOBAL(int)
+jsimd_can_rgb_ycc (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_ycc_rgb (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_rgb_ycc_convert (j_compress_ptr cinfo,
+                       JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+                       JDIMENSION output_row, int num_rows)
+{
+}
+
+GLOBAL(void)
+jsimd_ycc_rgb_convert (j_decompress_ptr cinfo,
+                       JSAMPIMAGE input_buf, JDIMENSION input_row,
+                       JSAMPARRAY output_buf, int num_rows)
+{
+}
+
+GLOBAL(int)
+jsimd_can_h2v2_downsample (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_h2v1_downsample (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+                       JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+}
+
+GLOBAL(void)
+jsimd_h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
+                       JSAMPARRAY input_data, JSAMPARRAY output_data)
+{
+}
+
+GLOBAL(int)
+jsimd_can_h2v2_upsample (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_h2v1_upsample (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_h2v2_upsample (j_decompress_ptr cinfo,
+                     jpeg_component_info * compptr, 
+                     JSAMPARRAY input_data,
+                     JSAMPARRAY * output_data_ptr)
+{
+}
+
+GLOBAL(void)
+jsimd_h2v1_upsample (j_decompress_ptr cinfo,
+                     jpeg_component_info * compptr, 
+                     JSAMPARRAY input_data,
+                     JSAMPARRAY * output_data_ptr)
+{
+}
+
+GLOBAL(int)
+jsimd_can_h2v2_fancy_upsample (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_h2v1_fancy_upsample (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_h2v2_fancy_upsample (j_decompress_ptr cinfo,
+                           jpeg_component_info * compptr, 
+                           JSAMPARRAY input_data,
+                           JSAMPARRAY * output_data_ptr)
+{
+}
+
+GLOBAL(void)
+jsimd_h2v1_fancy_upsample (j_decompress_ptr cinfo,
+                           jpeg_component_info * compptr, 
+                           JSAMPARRAY input_data,
+                           JSAMPARRAY * output_data_ptr)
+{
+}
+
+GLOBAL(int)
+jsimd_can_h2v2_merged_upsample (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_h2v1_merged_upsample (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_h2v2_merged_upsample (j_decompress_ptr cinfo,
+                            JSAMPIMAGE input_buf,
+                            JDIMENSION in_row_group_ctr,
+                            JSAMPARRAY output_buf)
+{
+}
+
+GLOBAL(void)
+jsimd_h2v1_merged_upsample (j_decompress_ptr cinfo,
+                            JSAMPIMAGE input_buf,
+                            JDIMENSION in_row_group_ctr,
+                            JSAMPARRAY output_buf)
+{
+}
+
+GLOBAL(int)
+jsimd_can_convsamp (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_convsamp_float (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_convsamp (JSAMPARRAY sample_data, JDIMENSION start_col,
+                DCTELEM * workspace)
+{
+}
+
+GLOBAL(void)
+jsimd_convsamp_float (JSAMPARRAY sample_data, JDIMENSION start_col,
+                      FAST_FLOAT * workspace)
+{
+}
+
+GLOBAL(int)
+jsimd_can_fdct_islow (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_fdct_ifast (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_fdct_float (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_fdct_islow (DCTELEM * data)
+{
+}
+
+GLOBAL(void)
+jsimd_fdct_ifast (DCTELEM * data)
+{
+}
+
+GLOBAL(void)
+jsimd_fdct_float (FAST_FLOAT * data)
+{
+}
+
+GLOBAL(int)
+jsimd_can_quantize (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_quantize_float (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_quantize (JCOEFPTR coef_block, DCTELEM * divisors,
+                DCTELEM * workspace)
+{
+}
+
+GLOBAL(void)
+jsimd_quantize_float (JCOEFPTR coef_block, FAST_FLOAT * divisors,
+                      FAST_FLOAT * workspace)
+{
+}
+
+GLOBAL(int)
+jsimd_can_idct_2x2 (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_idct_4x4 (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+                JCOEFPTR coef_block, JSAMPARRAY output_buf,
+                JDIMENSION output_col)
+{
+}
+
+GLOBAL(void)
+jsimd_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+                JCOEFPTR coef_block, JSAMPARRAY output_buf,
+                JDIMENSION output_col)
+{
+}
+
+GLOBAL(int)
+jsimd_can_idct_islow (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_idct_ifast (void)
+{
+  return 0;
+}
+
+GLOBAL(int)
+jsimd_can_idct_float (void)
+{
+  return 0;
+}
+
+GLOBAL(void)
+jsimd_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+                JCOEFPTR coef_block, JSAMPARRAY output_buf,
+                JDIMENSION output_col)
+{
+}
+
+GLOBAL(void)
+jsimd_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+                JCOEFPTR coef_block, JSAMPARRAY output_buf,
+                JDIMENSION output_col)
+{
+}
+
+GLOBAL(void)
+jsimd_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
+                JCOEFPTR coef_block, JSAMPARRAY output_buf,
+                JDIMENSION output_col)
+{
+}
+

jsimddct.h

@@ -0,0 +1,101 @@
+/*
+ * jsimddct.h
+ *
+ * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * 
+ * Based on the x86 SIMD extension for IJG JPEG library,
+ * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ *
+ */
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jsimd_can_convsamp                jSCanConv
+#define jsimd_can_convsamp_float          jSCanConvF
+#define jsimd_convsamp                    jSConv
+#define jsimd_convsamp_float              jSConvF
+#define jsimd_can_fdct_islow              jSCanFDCTIS
+#define jsimd_can_fdct_ifast              jSCanFDCTIF
+#define jsimd_can_fdct_float              jSCanFDCTFl
+#define jsimd_fdct_islow                  jSFDCTIS
+#define jsimd_fdct_ifast                  jSFDCTIF
+#define jsimd_fdct_float                  jSFDCTFl
+#define jsimd_can_quantize                jSCanQuant
+#define jsimd_can_quantize_float          jSCanQuantF
+#define jsimd_quantize                    jSQuant
+#define jsimd_quantize_float              jSQuantF
+#define jsimd_can_idct_2x2                jSCanIDCT22
+#define jsimd_can_idct_4x4                jSCanIDCT44
+#define jsimd_idct_2x2                    jSIDCT22
+#define jsimd_idct_4x4                    jSIDCT44
+#define jsimd_can_idct_islow              jSCanIDCTIS
+#define jsimd_can_idct_ifast              jSCanIDCTIF
+#define jsimd_can_idct_float              jSCanIDCTFl
+#define jsimd_idct_islow                  jSIDCTIS
+#define jsimd_idct_ifast                  jSIDCTIF
+#define jsimd_idct_float                  jSIDCTFl
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+EXTERN(int) jsimd_can_convsamp JPP((void));
+EXTERN(int) jsimd_can_convsamp_float JPP((void));
+
+EXTERN(void) jsimd_convsamp JPP((JSAMPARRAY sample_data,
+                                 JDIMENSION start_col,
+                                 DCTELEM * workspace));
+EXTERN(void) jsimd_convsamp_float JPP((JSAMPARRAY sample_data,
+                                       JDIMENSION start_col,
+                                       FAST_FLOAT * workspace));
+
+EXTERN(int) jsimd_can_fdct_islow JPP((void));
+EXTERN(int) jsimd_can_fdct_ifast JPP((void));
+EXTERN(int) jsimd_can_fdct_float JPP((void));
+
+EXTERN(void) jsimd_fdct_islow JPP((DCTELEM * data));
+EXTERN(void) jsimd_fdct_ifast JPP((DCTELEM * data));
+EXTERN(void) jsimd_fdct_float JPP((FAST_FLOAT * data));
+
+EXTERN(int) jsimd_can_quantize JPP((void));
+EXTERN(int) jsimd_can_quantize_float JPP((void));
+
+EXTERN(void) jsimd_quantize JPP((JCOEFPTR coef_block,
+                                 DCTELEM * divisors,
+                                 DCTELEM * workspace));
+EXTERN(void) jsimd_quantize_float JPP((JCOEFPTR coef_block,
+                                       FAST_FLOAT * divisors,
+                                       FAST_FLOAT * workspace));
+
+EXTERN(int) jsimd_can_idct_2x2 JPP((void));
+EXTERN(int) jsimd_can_idct_4x4 JPP((void));
+
+EXTERN(void) jsimd_idct_2x2 JPP((j_decompress_ptr cinfo,
+                                 jpeg_component_info * compptr,
+                                 JCOEFPTR coef_block,
+                                 JSAMPARRAY output_buf,
+                                 JDIMENSION output_col));
+EXTERN(void) jsimd_idct_4x4 JPP((j_decompress_ptr cinfo,
+                                 jpeg_component_info * compptr,
+                                 JCOEFPTR coef_block,
+                                 JSAMPARRAY output_buf,
+                                 JDIMENSION output_col));
+
+EXTERN(int) jsimd_can_idct_islow JPP((void));
+EXTERN(int) jsimd_can_idct_ifast JPP((void));
+EXTERN(int) jsimd_can_idct_float JPP((void));
+
+EXTERN(void) jsimd_idct_islow JPP((j_decompress_ptr cinfo,
+                                   jpeg_component_info * compptr,
+                                   JCOEFPTR coef_block,
+                                   JSAMPARRAY output_buf,
+                                   JDIMENSION output_col));
+EXTERN(void) jsimd_idct_ifast JPP((j_decompress_ptr cinfo,
+                                   jpeg_component_info * compptr,
+                                   JCOEFPTR coef_block,
+                                   JSAMPARRAY output_buf,
+                                   JDIMENSION output_col));
+EXTERN(void) jsimd_idct_float JPP((j_decompress_ptr cinfo,
+                                   jpeg_component_info * compptr,
+                                   JCOEFPTR coef_block,
+                                   JSAMPARRAY output_buf,
+                                   JDIMENSION output_col));
+

jversion.h

@@ -1,7 +1,7 @@
 /*
  * jversion.h
  *
- * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 1991-1998, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -9,6 +9,6 @@
  */
 
 
-#define JVERSION	"6a  7-Feb-96"
+#define JVERSION	"6b  27-Mar-1998"
 
-#define JCOPYRIGHT	"Copyright (C) 1996, Thomas G. Lane"
+#define JCOPYRIGHT	"Copyright (C) 1998, Thomas G. Lane"

libjpeg.doc

@@ -1,6 +1,6 @@
 USING THE IJG JPEG LIBRARY
 
-Copyright (C) 1994-1996, Thomas G. Lane.
+Copyright (C) 1994-1998, Thomas G. Lane.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -47,6 +47,7 @@ Advanced features:
 	Really raw data: DCT coefficients
 	Progress monitoring
 	Memory management
+	Memory usage
 	Library compile-time options
 	Portability considerations
 	Notes for MS-DOS implementors
@@ -437,7 +438,7 @@ Typical code:
 	jpeg_finish_compress(&cinfo);
 
 If using the stdio destination manager, don't forget to close the output
-stdio stream if necessary.
+stdio stream (if necessary) afterwards.
 
 If you have requested a multi-pass operating mode, such as Huffman code
 optimization, jpeg_finish_compress() will perform the additional passes using
@@ -463,12 +464,13 @@ you'll need to repeat all of step 3.
 7. Release the JPEG compression object.
 
 When you are done with a JPEG compression object, destroy it by calling
-jpeg_destroy_compress().  This will free all subsidiary memory.  Or you can
-call jpeg_destroy() which works for either compression or decompression
-objects --- this may be more convenient if you are sharing code between
-compression and decompression cases.  (Actually, these routines are equivalent
-except for the declared type of the passed pointer.  To avoid gripes from
-ANSI C compilers, jpeg_destroy() should be passed a j_common_ptr.)
+jpeg_destroy_compress().  This will free all subsidiary memory (regardless of
+the previous state of the object).  Or you can call jpeg_destroy(), which
+works for either compression or decompression objects --- this may be more
+convenient if you are sharing code between compression and decompression
+cases.  (Actually, these routines are equivalent except for the declared type
+of the passed pointer.  To avoid gripes from ANSI C compilers, jpeg_destroy()
+should be passed a j_common_ptr.)
 
 If you allocated the jpeg_compress_struct structure from malloc(), freeing
 it is your responsibility --- jpeg_destroy() won't.  Ditto for the error
@@ -489,13 +491,19 @@ in either of two ways:
   legitimate at any point after calling jpeg_create_compress() --- in fact,
   it's safe even if jpeg_create_compress() fails.
 
-* If you want to re-use the JPEG object, call jpeg_abort_compress(), or
+* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call
   jpeg_abort() which works on both compression and decompression objects.
   This will return the object to an idle state, releasing any working memory.
   jpeg_abort() is allowed at any time after successful object creation.
 
 Note that cleaning up the data destination, if required, is your
-responsibility.
+responsibility; neither of these routines will call term_destination().
+(See "Compressed data handling", below, for more about that.)
+
+jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG
+object that has reported an error by calling error_exit (see "Error handling"
+for more info).  The internal state of such an object is likely to be out of
+whack.  Either of these two routines will return the object to a known state.
 
 
 Decompression details
@@ -673,10 +681,10 @@ jpeg_read_scanlines() reads at least one scanline per call, until the
 bottom of the image has been reached.
 
 If you use a buffer larger than one scanline, it is NOT safe to assume that
-jpeg_read_scanlines() fills it.  (The current implementation won't return
-more than cinfo.rec_outbuf_height scanlines per call, no matter how large
-a buffer you pass.)  So you must always provide a loop that calls
-jpeg_read_scanlines() repeatedly until the whole image has been read.
+jpeg_read_scanlines() fills it.  (The current implementation returns only a
+few scanlines per call, no matter how large a buffer you pass.)  So you must
+always provide a loop that calls jpeg_read_scanlines() repeatedly until the
+whole image has been read.
 
 
 7. jpeg_finish_decompress(...);
@@ -693,7 +701,7 @@ If using the stdio source manager, don't forget to close the source stdio
 stream if necessary.
 
 It is an error to call jpeg_finish_decompress() before reading the correct
-total number of scanlines.  If you wish to abort compression, call
+total number of scanlines.  If you wish to abort decompression, call
 jpeg_abort() as discussed below.
 
 After completing a decompression cycle, you may dispose of the JPEG object as
@@ -744,6 +752,17 @@ library (only compression or only decompression), only that much code will be
 included from the library, unless your linker is hopelessly brain-damaged.
 The supplied makefiles build libjpeg.a automatically (see install.doc).
 
+While you can build the JPEG library as a shared library if the whim strikes
+you, we don't really recommend it.  The trouble with shared libraries is that
+at some point you'll probably try to substitute a new version of the library
+without recompiling the calling applications.  That generally doesn't work
+because the parameter struct declarations usually change with each new
+version.  In other words, the library's API is *not* guaranteed binary
+compatible across versions; we only try to ensure source-code compatibility.
+(In hindsight, it might have been smarter to hide the parameter structs from
+applications and introduce a ton of access functions instead.  Too late now,
+however.)
+
 On some systems your application may need to set up a signal handler to ensure
 that temporary files are deleted if the program is interrupted.  This is most
 critical if you are on MS-DOS and use the jmemdos.c memory manager back end;
@@ -893,6 +912,11 @@ int restart_in_rows
 	Set restart_in_rows to specify the interval in MCU rows.  (If
 	restart_in_rows is not 0, then restart_interval is set after the
 	image width in MCUs is computed.)  Defaults are zero (no restarts).
+	One restart marker per MCU row is often a good choice.
+	NOTE: the overhead of restart markers is higher in grayscale JPEG
+	files than in color files, and MUCH higher in progressive JPEGs.
+	If you use restarts, you may want to use larger intervals in those
+	cases.
 
 const jpeg_scan_info * scan_info
 int num_scans
@@ -916,6 +940,13 @@ boolean write_JFIF_header
 	jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space
 	(ie, YCbCr or grayscale) is selected, otherwise FALSE.
 
+UINT8 JFIF_major_version
+UINT8 JFIF_minor_version
+	The version number to be written into the JFIF marker.
+	jpeg_set_defaults() initializes the version to 1.01 (major=minor=1).
+	You should set it to 1.02 (major=1, minor=2) if you plan to write
+	any JFIF 1.02 extension markers.
+
 UINT8 density_unit
 UINT16 X_density
 UINT16 Y_density
@@ -1013,6 +1044,8 @@ JDIMENSION image_height
 int num_components			Number of color components
 J_COLOR_SPACE jpeg_color_space		Colorspace of image
 boolean saw_JFIF_marker			TRUE if a JFIF APP0 marker was seen
+  UINT8 JFIF_major_version		Version information from JFIF marker
+  UINT8 JFIF_minor_version
   UINT8 density_unit			Resolution data from JFIF marker
   UINT16 X_density
   UINT16 Y_density
@@ -1144,6 +1177,8 @@ copying.  In high-quality modes, rec_outbuf_height is always 1, but some
 faster, lower-quality modes set it to larger values (typically 2 to 4).
 If you are going to ask for a high-speed processing mode, you may as well
 go to the trouble of honoring rec_outbuf_height so as to avoid data copying.
+(An output buffer larger than rec_outbuf_height lines is OK, but won't
+provide any material speed improvement over that height.)
 
 
 Special color spaces
@@ -1204,8 +1239,11 @@ set out_color_space to override this.  Again, you must select a supported
 transformation.  jdcolor.c currently supports
 	YCbCr => GRAYSCALE
 	YCbCr => RGB
+	GRAYSCALE => RGB
 	YCCK => CMYK
-as well as the null transforms.
+as well as the null transforms.  (Since GRAYSCALE=>RGB is provided, an
+application can force grayscale JPEGs to look like color JPEGs if it only
+wants to handle one case.)
 
 The two-pass color quantizer, jquant2.c, is specialized to handle RGB data
 (it weights distances appropriately for RGB colors).  You'll need to modify
@@ -1264,7 +1302,10 @@ additional data which is not known to the JPEG library or the standard error
 handler.  The most convenient way to do this is to embed either the JPEG
 object or the jpeg_error_mgr struct in a larger structure that contains
 additional fields; then casting the passed pointer provides access to the
-additional fields.  Again, see example.c for one way to do it.
+additional fields.  Again, see example.c for one way to do it.  (Beginning
+with IJG version 6b, there is also a void pointer "client_data" in each
+JPEG object, which the application can also use to find related data.
+The library does not touch client_data at all.)
 
 The individual methods that you might wish to override are:
 
@@ -1603,19 +1644,27 @@ fill_input_buffer() knows that no more data is available, it can set the
 pointer/count to point to a dummy EOI marker and then return TRUE just as
 though it had read more data in a non-suspending situation.
 
-The decompressor does not attempt to suspend within any JPEG marker; it will
-backtrack to the start of the marker.  Hence the input buffer must be large
-enough to hold the longest marker in the file.  We recommend at least a 2K
-buffer.  The buffer would need to be 64K to allow for arbitrary COM or APPn
-markers, but the decompressor does not actually try to read these; it just
-skips them by calling skip_input_data().  If you provide a special marker
-handling routine that does look at such markers, coping with buffer overflow
-is your problem.  Ordinary JPEG markers should normally not exceed a few
-hundred bytes each (DHT tables are typically the longest).  For robustness
-against damaged marker length counts, you may wish to insert a test in your
-application for the case that the input buffer is completely full and yet the
-decoder has suspended without consuming any data --- otherwise, if this
-situation did occur, it would lead to an endless loop.
+The decompressor does not attempt to suspend within standard JPEG markers;
+instead it will backtrack to the start of the marker and reprocess the whole
+marker next time.  Hence the input buffer must be large enough to hold the
+longest standard marker in the file.  Standard JPEG markers should normally
+not exceed a few hundred bytes each (DHT tables are typically the longest).
+We recommend at least a 2K buffer for performance reasons, which is much
+larger than any correct marker is likely to be.  For robustness against
+damaged marker length counts, you may wish to insert a test in your
+application for the case that the input buffer is completely full and yet
+the decoder has suspended without consuming any data --- otherwise, if this
+situation did occur, it would lead to an endless loop.  (The library can't
+provide this test since it has no idea whether "the buffer is full", or
+even whether there is a fixed-size input buffer.)
+
+The input buffer would need to be 64K to allow for arbitrary COM or APPn
+markers, but these are handled specially: they are either saved into allocated
+memory, or skipped over by calling skip_input_data().  In the former case,
+suspension is handled correctly, and in the latter case, the problem of
+buffer overrun is placed on skip_input_data's shoulders, as explained above.
+Note that if you provide your own marker handling routine for large markers,
+you should consider how to deal with buffer overflow.
 
 Multiple-buffer management:
 
@@ -2186,11 +2235,42 @@ for an example of copying quantization tables.
 To read abbreviated image files, you simply need to load the proper tables
 into the decompression object before trying to read the abbreviated image.
 If the proper tables are stored in the application program, you can just
-allocate the table structs and fill in their contents directly.  More commonly
-you'd want to read the tables from a tables-only file.  The jpeg_read_header()
-call is sufficient to read a tables-only file.  You must pass a second
-parameter of FALSE to indicate that you do not require an image to be present.
-Thus, the typical scenario is
+allocate the table structs and fill in their contents directly.  For example,
+to load a fixed quantization table into table slot "n":
+
+    if (cinfo.quant_tbl_ptrs[n] == NULL)
+      cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo);
+    quant_ptr = cinfo.quant_tbl_ptrs[n];	/* quant_ptr is JQUANT_TBL* */
+    for (i = 0; i < 64; i++) {
+      /* Qtable[] is desired quantization table, in natural array order */
+      quant_ptr->quantval[i] = Qtable[i];
+    }
+
+Code to load a fixed Huffman table is typically (for AC table "n"):
+
+    if (cinfo.ac_huff_tbl_ptrs[n] == NULL)
+      cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo);
+    huff_ptr = cinfo.ac_huff_tbl_ptrs[n];	/* huff_ptr is JHUFF_TBL* */
+    for (i = 1; i <= 16; i++) {
+      /* counts[i] is number of Huffman codes of length i bits, i=1..16 */
+      huff_ptr->bits[i] = counts[i];
+    }
+    for (i = 0; i < 256; i++) {
+      /* symbols[] is the list of Huffman symbols, in code-length order */
+      huff_ptr->huffval[i] = symbols[i];
+    }
+
+(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a
+constant JQUANT_TBL object is not safe.  If the incoming file happened to
+contain a quantization table definition, your master table would get
+overwritten!  Instead allocate a working table copy and copy the master table
+into it, as illustrated above.  Ditto for Huffman tables, of course.)
+
+You might want to read the tables from a tables-only file, rather than
+hard-wiring them into your application.  The jpeg_read_header() call is
+sufficient to read a tables-only file.  You must pass a second parameter of
+FALSE to indicate that you do not require an image to be present.  Thus, the
+typical scenario is
 
 	create JPEG decompression object
 	set source to tables-only file
@@ -2264,6 +2344,7 @@ the selected colorspace is RGB, CMYK, or YCCK.  You can disable this, but
 we don't recommend it.  The decompression library will recognize JFIF and
 Adobe markers and will set the JPEG colorspace properly when one is found.
 
+
 You can write special markers immediately following the datastream header by
 calling jpeg_write_marker() after jpeg_start_compress() and before the first
 call to jpeg_write_scanlines().  When you do this, the markers appear after
@@ -2273,18 +2354,96 @@ all else.  Specify the marker type parameter as "JPEG_COM" for COM or
 any marker type, but we don't recommend writing any other kinds of marker.)
 For example, to write a user comment string pointed to by comment_text:
 	jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text));
-Or if you prefer to synthesize the marker byte sequence yourself, you can
-just cram it straight into the data destination module.
 
-For decompression, you can supply your own routine to process COM or APPn
-markers by calling jpeg_set_marker_processor().  Usually you'd call this
-after creating a decompression object and before calling jpeg_read_header(),
-because the markers of interest will normally be scanned by jpeg_read_header.
-Once you've supplied a routine, it will be used for the life of that
-decompression object.  A separate routine may be registered for COM and for
-each APPn marker code.
+If it's not convenient to store all the marker data in memory at once,
+you can instead call jpeg_write_m_header() followed by multiple calls to
+jpeg_write_m_byte().  If you do it this way, it's your responsibility to
+call jpeg_write_m_byte() exactly the number of times given in the length
+parameter to jpeg_write_m_header().  (This method lets you empty the
+output buffer partway through a marker, which might be important when
+using a suspending data destination module.  In any case, if you are using
+a suspending destination, you should flush its buffer after inserting
+any special markers.  See "I/O suspension".)
 
-A marker processor routine must have the signature
+Or, if you prefer to synthesize the marker byte sequence yourself,
+you can just cram it straight into the data destination module.
+
+If you are writing JFIF 1.02 extension markers (thumbnail images), don't
+forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the
+correct JFIF version number in the JFIF header marker.  The library's default
+is to write version 1.01, but that's wrong if you insert any 1.02 extension
+markers.  (We could probably get away with just defaulting to 1.02, but there
+used to be broken decoders that would complain about unknown minor version
+numbers.  To reduce compatibility risks it's safest not to write 1.02 unless
+you are actually using 1.02 extensions.)
+
+
+When reading, two methods of handling special markers are available:
+1. You can ask the library to save the contents of COM and/or APPn markers
+into memory, and then examine them at your leisure afterwards.
+2. You can supply your own routine to process COM and/or APPn markers
+on-the-fly as they are read.
+The first method is simpler to use, especially if you are using a suspending
+data source; writing a marker processor that copes with input suspension is
+not easy (consider what happens if the marker is longer than your available
+input buffer).  However, the second method conserves memory since the marker
+data need not be kept around after it's been processed.
+
+For either method, you'd normally set up marker handling after creating a
+decompression object and before calling jpeg_read_header(), because the
+markers of interest will typically be near the head of the file and so will
+be scanned by jpeg_read_header.  Once you've established a marker handling
+method, it will be used for the life of that decompression object
+(potentially many datastreams), unless you change it.  Marker handling is
+determined separately for COM markers and for each APPn marker code.
+
+
+To save the contents of special markers in memory, call
+	jpeg_save_markers(cinfo, marker_code, length_limit)
+where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n.
+(To arrange to save all the special marker types, you need to call this
+routine 17 times, for COM and APP0-APP15.)  If the incoming marker is longer
+than length_limit data bytes, only length_limit bytes will be saved; this
+parameter allows you to avoid chewing up memory when you only need to see the
+first few bytes of a potentially large marker.  If you want to save all the
+data, set length_limit to 0xFFFF; that is enough since marker lengths are only
+16 bits.  As a special case, setting length_limit to 0 prevents that marker
+type from being saved at all.  (That is the default behavior, in fact.)
+
+After jpeg_read_header() completes, you can examine the special markers by
+following the cinfo->marker_list pointer chain.  All the special markers in
+the file appear in this list, in order of their occurrence in the file (but
+omitting any markers of types you didn't ask for).  Both the original data
+length and the saved data length are recorded for each list entry; the latter
+will not exceed length_limit for the particular marker type.  Note that these
+lengths exclude the marker length word, whereas the stored representation
+within the JPEG file includes it.  (Hence the maximum data length is really
+only 65533.)
+
+It is possible that additional special markers appear in the file beyond the
+SOS marker at which jpeg_read_header stops; if so, the marker list will be
+extended during reading of the rest of the file.  This is not expected to be
+common, however.  If you are short on memory you may want to reset the length
+limit to zero for all marker types after finishing jpeg_read_header, to
+ensure that the max_memory_to_use setting cannot be exceeded due to addition
+of later markers.
+
+The marker list remains stored until you call jpeg_finish_decompress or
+jpeg_abort, at which point the memory is freed and the list is set to empty.
+(jpeg_destroy also releases the storage, of course.)
+
+Note that the library is internally interested in APP0 and APP14 markers;
+if you try to set a small nonzero length limit on these types, the library
+will silently force the length up to the minimum it wants.  (But you can set
+a zero length limit to prevent them from being saved at all.)  Also, in a
+16-bit environment, the maximum length limit may be constrained to less than
+65533 by malloc() limitations.  It is therefore best not to assume that the
+effective length limit is exactly what you set it to be.
+
+
+If you want to supply your own marker-reading routine, you do it by calling
+jpeg_set_marker_processor().  A marker processor routine must have the
+signature
 	boolean jpeg_marker_parser_method (j_decompress_ptr cinfo)
 Although the marker code is not explicitly passed, the routine can find it
 in cinfo->unread_marker.  At the time of call, the marker proper has been
@@ -2298,9 +2457,16 @@ use a suspending data source.)
 If you override the default APP0 or APP14 processors, it is up to you to
 recognize JFIF and Adobe markers if you want colorspace recognition to occur
 properly.  We recommend copying and extending the default processors if you
-want to do that.
+want to do that.  (A better idea is to save these marker types for later
+examination by calling jpeg_save_markers(); that method doesn't interfere
+with the library's own processing of these markers.)
+
+jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive
+--- if you call one it overrides any previous call to the other, for the
+particular marker type specified.
 
 A simple example of an external COM processor can be found in djpeg.c.
+Also, see jpegtran.c for an example of using jpeg_save_markers.
 
 
 Raw (downsampled) image data
@@ -2446,6 +2612,15 @@ and also read structure.doc's discussion of virtual array handling).  Or,
 for simple transcoding to a different JPEG file format, the array list can
 just be handed directly to jpeg_write_coefficients().
 
+Each block in the block arrays contains quantized coefficient values in
+normal array order (not JPEG zigzag order).  The block arrays contain only
+DCT blocks containing real data; any entirely-dummy blocks added to fill out
+interleaved MCUs at the right or bottom edges of the image are discarded
+during reading and are not stored in the block arrays.  (The size of each
+block array can be determined from the width_in_blocks and height_in_blocks
+fields of the component's comp_info entry.)  This is also the data format
+expected by jpeg_write_coefficients().
+
 When you are done using the virtual arrays, call jpeg_finish_decompress()
 to release the array storage and return the decompression object to an idle
 state; or just call jpeg_destroy() if you don't need to reuse the object.
@@ -2455,14 +2630,14 @@ NULL if it is forced to suspend; a non-NULL return value indicates successful
 completion.  You need not test for a NULL return value when using a
 non-suspending data source.
 
-Each block in the block arrays contains quantized coefficient values in
-normal array order (not JPEG zigzag order).  The block arrays contain only
-DCT blocks containing real data; any entirely-dummy blocks added to fill out
-interleaved MCUs at the right or bottom edges of the image are discarded
-during reading and are not stored in the block arrays.  (The size of each
-block array can be determined from the width_in_blocks and height_in_blocks
-fields of the component's comp_info entry.)  This is also the data format
-expected by jpeg_write_coefficients().
+It is also possible to call jpeg_read_coefficients() to obtain access to the
+decoder's coefficient arrays during a normal decode cycle in buffered-image
+mode.  This frammish might be useful for progressively displaying an incoming
+image and then re-encoding it without loss.  To do this, decode in buffered-
+image mode as discussed previously, then call jpeg_read_coefficients() after
+the last jpeg_finish_output() call.  The arrays will be available for your use
+until you call jpeg_finish_decompress().
+
 
 To write the contents of a JPEG file as DCT coefficients, you must provide
 the DCT coefficients stored in virtual block arrays.  You can either pass
@@ -2635,13 +2810,59 @@ since the C library is supposed to take care of deleting files made with
 tmpfile().
 
 
+Memory usage
+------------
+
+Working memory requirements while performing compression or decompression
+depend on image dimensions, image characteristics (such as colorspace and
+JPEG process), and operating mode (application-selected options).
+
+As of v6b, the decompressor requires:
+ 1. About 24K in more-or-less-fixed-size data.  This varies a bit depending
+    on operating mode and image characteristics (particularly color vs.
+    grayscale), but it doesn't depend on image dimensions.
+ 2. Strip buffers (of size proportional to the image width) for IDCT and
+    upsampling results.  The worst case for commonly used sampling factors
+    is about 34 bytes * width in pixels for a color image.  A grayscale image
+    only needs about 8 bytes per pixel column.
+ 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG
+    file (including progressive JPEGs), or whenever you select buffered-image
+    mode.  This takes 2 bytes/coefficient.  At typical 2x2 sampling, that's
+    3 bytes per pixel for a color image.  Worst case (1x1 sampling) requires
+    6 bytes/pixel.  For grayscale, figure 2 bytes/pixel.
+ 4. To perform 2-pass color quantization, the decompressor also needs a
+    128K color lookup table and a full-image pixel buffer (3 bytes/pixel).
+This does not count any memory allocated by the application, such as a
+buffer to hold the final output image.
+
+The above figures are valid for 8-bit JPEG data precision and a machine with
+32-bit ints.  For 12-bit JPEG data, double the size of the strip buffers and
+quantization pixel buffer.  The "fixed-size" data will be somewhat smaller
+with 16-bit ints, larger with 64-bit ints.  Also, CMYK or other unusual
+color spaces will require different amounts of space.
+
+The full-image coefficient and pixel buffers, if needed at all, do not
+have to be fully RAM resident; you can have the library use temporary
+files instead when the total memory usage would exceed a limit you set.
+(But if your OS supports virtual memory, it's probably better to just use
+jmemnobs and let the OS do the swapping.)
+
+The compressor's memory requirements are similar, except that it has no need
+for color quantization.  Also, it needs a full-image DCT coefficient buffer
+if Huffman-table optimization is asked for, even if progressive mode is not
+requested.
+
+If you need more detailed information about memory usage in a particular
+situation, you can enable the MEM_STATS code in jmemmgr.c.
+
+
 Library compile-time options
 ----------------------------
 
 A number of compile-time options are available by modifying jmorecfg.h.
 
 The JPEG standard provides for both the baseline 8-bit DCT process and
-a 12-bit DCT process.  12-bit lossy JPEG is supported if you define
+a 12-bit DCT process.  The IJG code supports 12-bit lossy JPEG if you define
 BITS_IN_JSAMPLE as 12 rather than 8.  Note that this causes JSAMPLE to be
 larger than a char, so it affects the surrounding application's image data.
 The sample applications cjpeg and djpeg can support 12-bit mode only for PPM
@@ -2658,6 +2879,9 @@ Note that a 12-bit library always compresses in Huffman optimization mode,
 in order to generate valid Huffman tables.  This is necessary because our
 default Huffman tables only cover 8-bit data.  If you need to output 12-bit
 files in one pass, you'll have to supply suitable default Huffman tables.
+You may also want to supply your own DCT quantization tables; the existing
+quality-scaling code has been developed for 8-bit use, and probably doesn't
+generate especially good tables for 12-bit.
 
 The maximum number of components (color channels) in the image is determined
 by MAX_COMPONENTS.  The JPEG standard allows up to 255 components, but we
@@ -2674,6 +2898,16 @@ to burn.
 You can reduce the size of the library by compiling out various optional
 functions.  To do this, undefine xxx_SUPPORTED symbols as necessary.
 
+You can also save a few K by not having text error messages in the library;
+the standard error message table occupies about 5Kb.  This is particularly
+reasonable for embedded applications where there's no good way to display 
+a message anyway.  To do this, remove the creation of the message table
+(jpeg_std_message_table[]) from jerror.c, and alter format_message to do
+something reasonable without it.  You could output the numeric value of the
+message code number, for example.  If you do this, you can also save a couple
+more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing;
+you don't need trace capability anyway, right?
+
 
 Portability considerations
 --------------------------
@@ -2684,9 +2918,9 @@ the design goals in this area.  (If you encounter any bugs that cause the
 library to be less portable than is claimed here, we'd appreciate hearing
 about them.)
 
-The code works fine on both ANSI and pre-ANSI C compilers, using any of the
-popular system include file setups, and some not-so-popular ones too.  See
-install.doc for configuration procedures.
+The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of
+the popular system include file setups, and some not-so-popular ones too.
+See install.doc for configuration procedures.
 
 The code is not dependent on the exact sizes of the C data types.  As
 distributed, we make the assumptions that
@@ -2763,7 +2997,7 @@ Far data space may also be a tight resource when you are dealing with large
 images.  The most memory-intensive case is decompression with two-pass color
 quantization, or single-pass quantization to an externally supplied color
 map.  This requires a 128Kb color lookup table plus strip buffers amounting
-to about 50 bytes per column for typical sampling ratios (eg, about 32000
+to about 40 bytes per column for typical sampling ratios (eg, about 25600
 bytes for a 640-pixel-wide image).  You may not be able to process wide
 images if you have large data structures of your own.
 

makcjpeg.st

@@ -1,37 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de)
-; and to Dr. B. Setzepfandt (bernd@gina.uni-muenster.de).
-;
-; To use this file, rename it to CJPEG.PRJ.
-; If you are using Turbo C, change filenames beginning with "PC..." to "TC..."
-; Read installation instructions before trying to make the program!
-;
-;
-;      * * * Output file * * *
-cjpeg.ttp
-;
-; * * * COMPILER OPTIONS * * *  
-.C[-P]        ; absolute calls
-.C[-M]        ; and no string merging, folks
-.C[-w-cln]    ; no "constant is long" warnings
-.C[-w-par]    ; no "parameter xxxx unused"
-.C[-w-rch]    ; no "unreachable code"
-.C[-wsig]     ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * * 
-PCSTART.O
-cjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
-cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdswitch.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdppm.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdgif.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdbmp.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdrle.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-LIBJPEG.LIB        ; built by LIBJPEG.PRJ
-PCFLTLIB.LIB       ; floating point library
-; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-PCSTDLIB.LIB       ; standard library
-PCEXTLIB.LIB       ; extended library

makdjpeg.st

@@ -1,37 +0,0 @@
-; Project file for Independent JPEG Group's software
-;
-; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C.
-; Thanks to Frank Moehle (Frank.Moehle@arbi.informatik.uni-oldenburg.de)
-; and to Dr. B. Setzepfandt (bernd@gina.uni-muenster.de).
-;
-; To use this file, rename it to DJPEG.PRJ.
-; If you are using Turbo C, change filenames beginning with "PC..." to "TC..."
-; Read installation instructions before trying to make the program!
-;
-;
-;      * * * Output file * * *
-djpeg.ttp
-;
-; * * * COMPILER OPTIONS * * *  
-.C[-P]        ; absolute calls
-.C[-M]        ; and no string merging, folks
-.C[-w-cln]    ; no "constant is long" warnings
-.C[-w-par]    ; no "parameter xxxx unused"
-.C[-w-rch]    ; no "unreachable code"
-.C[-wsig]     ; warn if significant digits may be lost
-=
-; * * * * List of modules * * * * 
-PCSTART.O
-djpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h)
-cdjpeg.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-rdcolmap.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrppm.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrgif.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrtarga.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrbmp.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-wrrle.c	(cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h)
-LIBJPEG.LIB        ; built by LIBJPEG.PRJ
-PCFLTLIB.LIB       ; floating point library
-; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED
-PCSTDLIB.LIB       ; standard library
-PCEXTLIB.LIB       ; extended library

makefile.ansi

@@ -1,210 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Unix-like systems with ANSI-capable compilers.
-# If you have a non-ANSI compiler, makefile.unix is a better starting point.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-CFLAGS= -O
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-LDFLAGS= 
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= 
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= rm -f
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o
-
-
-all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-libjpeg.a: $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-cjpeg: $(COBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	$(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
-	$(RM) core testout*
-
-test: cjpeg djpeg jpegtran
-	$(RM) testout*
-	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	./djpeg -dct int -gif -outfile testout.gif  testorig.jpg
-	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	./jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.gif testout.gif
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

makefile.bcc

@@ -1,279 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Borland C on MS-DOS or OS/2.
-# It works with Borland C++ for DOS, revision 3.0 or later,
-# and has been tested with Borland C++ for OS/2, revision 2.0.
-# Thanks to Tom Wright and Ge' Weijers (original DOS) and
-# Ken Porter (OS/2) for this file.
-
-# Read installation instructions before saying "make" !!
-
-# Are we under DOS or OS/2?
-!if !$d(DOS) && !$d(OS2)
-!if $d(__OS2__)
-OS2=1
-!else
-DOS=1
-!endif
-!endif
-
-# The name of your C compiler:
-CC= bcc
-
-# You may need to adjust these cc options:
-!if $d(DOS)
-CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch
-!else
-CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch
-!endif
-# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z).
-# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 for now.
-# -mm selects medium memory model (near data, far code pointers; DOS only!)
-# -w-par suppresses warnings about unused function parameters
-# -w-stu suppresses warnings about incomplete structures
-# -w-ccc suppresses warnings about compile-time-constant conditions
-# -w-rch suppresses warnings about unreachable code
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-!if $d(DOS)
-LDFLAGS= -mm
-# memory model option here must match CFLAGS!
-!else
-LDFLAGS=
-# -lai full-screen app
-# -lc case-significant link
-!endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.
-# For DOS, we recommend jmemdos.c and jmemdosa.asm.
-# For OS/2, we recommend jmemnobs.c (flat memory!)
-# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
-!if $d(DOS)
-SYSDEPMEM= jmemdos.obj jmemdosa.obj
-SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj
-!else
-SYSDEPMEM= jmemnobs.obj
-SYSDEPMEMLIB= +jmemnobs.obj
-!endif
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS)
-	- del libjpeg.lib
-	tlib libjpeg.lib /E /C @&&|
-+jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj +jdatadst.obj &
-+jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj +jcprepct.obj &
-+jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj &
-+jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj &
-+jdapistd.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj &
-+jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj +jdcoefct.obj &
-+jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj &
-+jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj &
-+jdmerge.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj &
-$(SYSDEPMEMLIB)
-|
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
-	$(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib
-
-rdjpgcom.exe: rdjpgcom.c
-!if $d(DOS)
-	$(CC) -ms -O rdjpgcom.c
-!else
-	$(CC) $(CFLAGS) rdjpgcom.c
-!endif
-
-# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk
-wrjpgcom.exe: wrjpgcom.c
-!if $d(DOS)
-	$(CC) -ml -O wrjpgcom.c
-!else
-	$(CC) $(CFLAGS) wrjpgcom.c
-!endif
-
-# This "{}" syntax allows Borland Make to "batch" source files.
-# In this way, each run of the compiler can build many modules.
-.c.obj:
-	$(CC) $(CFLAGS) -c{ $<}
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	- del *.obj
-	- del libjpeg.lib
-	- del cjpeg.exe
-	- del djpeg.exe
-	- del jpegtran.exe
-	- del rdjpgcom.exe
-	- del wrjpgcom.exe
-	- del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
-	- del testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -gif -outfile testout.gif  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-!if $d(DOS)
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.gif testout.gif
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-!else
-	echo n > n.tmp
-	comp testimg.ppm testout.ppm < n.tmp
-	comp testimg.gif testout.gif < n.tmp
-	comp testimg.jpg testout.jpg < n.tmp
-	comp testimg.ppm testoutp.ppm < n.tmp
-	comp testimgp.jpg testoutp.jpg < n.tmp
-	comp testorig.jpg testoutt.jpg < n.tmp
-	del n.tmp
-!endif
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-jmemdosa.obj: jmemdosa.asm
-	tasm /mx jmemdosa.asm

makefile.cfg

@@ -1,274 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# makefile.cfg is edited by configure to produce a custom Makefile.
-
-# Read installation instructions before saying "make" !!
-
-# For compiling with source and object files in different directories.
-srcdir = @srcdir@
-VPATH = @srcdir@
-
-# Where to install the programs and man pages.
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-bindir = $(exec_prefix)/bin
-libdir = $(exec_prefix)/lib
-includedir = $(prefix)/include
-binprefix =
-manprefix =
-manext = 1
-mandir = $(prefix)/man/man$(manext)
-
-# The name of your C compiler:
-CC= @CC@
-
-# You may need to adjust these cc options:
-CFLAGS= @CFLAGS@ @CPPFLAGS@ @INCLUDEFLAGS@
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-# However, any special defines for ansi2knr.c may be included here:
-ANSI2KNRFLAGS= @ANSI2KNRFLAGS@
-
-# Link-time cc options:
-LDFLAGS= @LDFLAGS@
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= @LIBS@
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= @MEMORYMGR@
-
-# miscellaneous OS-dependent stuff
-SHELL= /bin/sh
-# linker
-LN= $(CC)
-# file deletion command
-RM= rm -f
-# file rename command
-MV= mv
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= @RANLIB@
-# installation program
-INSTALL= @INSTALL@
-INSTALL_PROGRAM= @INSTALL_PROGRAM@
-INSTALL_DATA= @INSTALL_DATA@
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o
-
-
-all: @ANSI2KNR@ libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-# This rule causes ansi2knr to be invoked.
-@ISANSICOM@.c.o:
-@ISANSICOM@	./ansi2knr $(srcdir)/$*.c T$*.c
-@ISANSICOM@	$(CC) $(CFLAGS) -c T$*.c
-@ISANSICOM@	$(RM) T$*.c $*.o
-@ISANSICOM@	$(MV) T$*.o $*.o
-
-ansi2knr: ansi2knr.c
-	$(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr ansi2knr.c
-
-libjpeg.a: @ANSI2KNR@ $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-cjpeg: $(COBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-install: cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-	$(INSTALL_PROGRAM) cjpeg $(bindir)/$(binprefix)cjpeg
-	$(INSTALL_PROGRAM) djpeg $(bindir)/$(binprefix)djpeg
-	$(INSTALL_PROGRAM) jpegtran $(bindir)/$(binprefix)jpegtran
-	$(INSTALL_PROGRAM) rdjpgcom $(bindir)/$(binprefix)rdjpgcom
-	$(INSTALL_PROGRAM) wrjpgcom $(bindir)/$(binprefix)wrjpgcom
-	$(INSTALL_DATA) $(srcdir)/cjpeg.1 $(mandir)/$(manprefix)cjpeg.$(manext)
-	$(INSTALL_DATA) $(srcdir)/djpeg.1 $(mandir)/$(manprefix)djpeg.$(manext)
-	$(INSTALL_DATA) $(srcdir)/jpegtran.1 $(mandir)/$(manprefix)jpegtran.$(manext)
-	$(INSTALL_DATA) $(srcdir)/rdjpgcom.1 $(mandir)/$(manprefix)rdjpgcom.$(manext)
-	$(INSTALL_DATA) $(srcdir)/wrjpgcom.1 $(mandir)/$(manprefix)wrjpgcom.$(manext)
-
-install-lib: libjpeg.a install-headers
-	$(INSTALL_DATA) libjpeg.a $(libdir)/$(binprefix)libjpeg.a
-
-install-headers: jconfig.h
-	$(INSTALL_DATA) jconfig.h $(includedir)/jconfig.h
-	$(INSTALL_DATA) $(srcdir)/jpeglib.h $(includedir)/jpeglib.h
-	$(INSTALL_DATA) $(srcdir)/jmorecfg.h $(includedir)/jmorecfg.h
-	$(INSTALL_DATA) $(srcdir)/jerror.h $(includedir)/jerror.h
-
-clean:
-	$(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
-	$(RM) ansi2knr core testout* config.log config.status
-
-distribute:
-	$(RM) jpegsrc.tar*
-	tar cvf jpegsrc.tar $(DISTFILES)
-	compress -v jpegsrc.tar
-
-test: cjpeg djpeg jpegtran
-	$(RM) testout*
-	./djpeg -dct int -ppm -outfile testout.ppm  $(srcdir)/testorig.jpg
-	./djpeg -dct int -gif -outfile testout.gif  $(srcdir)/testorig.jpg
-	./cjpeg -dct int -outfile testout.jpg  $(srcdir)/testimg.ppm
-	./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg
-	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm
-	./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg
-	cmp $(srcdir)/testimg.ppm testout.ppm
-	cmp $(srcdir)/testimg.gif testout.gif
-	cmp $(srcdir)/testimg.jpg testout.jpg
-	cmp $(srcdir)/testimg.ppm testoutp.ppm
-	cmp $(srcdir)/testimgp.jpg testoutp.jpg
-	cmp $(srcdir)/testorig.jpg testoutt.jpg
-
-check: test
-
-# GNU Make likes to know which target names are not really files to be made:
-.PHONY: all install install-lib install-headers clean distribute test check
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

makefile.dj

@@ -1,234 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for DJGPP (Delorie's GNU C port) on MS-DOS.
-# Say "make exe" to get stub-style .exe's, or
-# "make standalone" to get standalone .exe's.
-
-# Read installation instructions before saying "make" !!
-
-# To do "make standalone", you'll need to be sure this points to go32.exe:
-GO32= c:/djgpp/bin/go32.exe
-
-# The name of your C compiler:
-CC= gcc
-
-# You may need to adjust these cc options:
-CFLAGS= -O2 -Wall
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Link-time cc options:
-LDFLAGS= 
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= 
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For DJGPP this is usually jmemnobs.o, but you could
-# use jmemname.o if you want to use named temp files instead of swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= del
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o
-
-
-all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-libjpeg.a: $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-cjpeg: $(COBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-exe: cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-	coff2exe cjpeg
-	coff2exe djpeg
-	coff2exe jpegtran
-	coff2exe rdjpgcom
-	coff2exe wrjpgcom
-
-standalone: cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-	coff2exe -s $(GO32) cjpeg
-	coff2exe -s $(GO32) djpeg
-	coff2exe -s $(GO32) jpegtran
-	coff2exe -s $(GO32) rdjpgcom
-	coff2exe -s $(GO32) wrjpgcom
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	$(RM) *.o
-	$(RM) cjpeg
-	$(RM) djpeg
-	$(RM) jpegtran
-	$(RM) rdjpgcom
-	$(RM) wrjpgcom
-	$(RM) libjpeg.a
-	$(RM) testout*.*
-
-test: cjpeg djpeg jpegtran
-	$(RM) testout*.*
-	go32 djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	go32 djpeg -dct int -gif -outfile testout.gif  testorig.jpg
-	go32 cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	go32 djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	go32 cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	go32 jpegtran -outfile testoutt.jpg testprog.jpg
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.gif testout.gif
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

makefile.manx

@@ -1,210 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Amiga systems using Manx Aztec C ver 5.x.
-# Thanks to D.J. James (djjames@cup.portal.com) for this version.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-# Uncomment for generic 68000 code (will work on any Amiga)
-ARCHFLAGS= -sn
-
-# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU)
-#ARCHFLAGS= -c2
-
-CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4
-
-# Link-time cc options:
-LDFLAGS= -g
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= -lml -lcl
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Amiga we recommend jmemname.o.
-SYSDEPMEM= jmemname.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= ln
-# file deletion command
-RM= delete quiet
-# library (.lib) file creation command
-AR= lb
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o
-
-
-all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-libjpeg.lib: $(LIBOBJECTS)
-	-$(RM) libjpeg.lib
-	$(AR) libjpeg.lib  $(LIBOBJECTS)
-
-cjpeg: $(COBJECTS) libjpeg.lib
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS)
-
-djpeg: $(DOBJECTS) libjpeg.lib
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS)
-
-jpegtran: $(TROBJECTS) libjpeg.lib
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	-$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom
-	-$(RM) core testout*.*
-
-test: cjpeg djpeg jpegtran
-	-$(RM) testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -gif -outfile testout.gif  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.gif testout.gif
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

makefile.mc6

@@ -1,233 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Microsoft C for MS-DOS, version 6.00A and up.
-# Use NMAKE, not Microsoft's brain-damaged MAKE.
-# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd.
-
-# Read installation instructions before saying "nmake" !!
-
-# You may need to adjust these compiler options:
-CFLAGS = -AM -Oecigt -Gs -W3
-# -AM medium memory model (or use -AS for small model, if you remove features)
-# -Oecigt -Gs  maximum safe optimisation (-Ol has bugs in MSC 6.00A)
-# -W3 warning level 3
-# You might also want to add -G2 if you have an 80286, etc.
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For DOS, we recommend jmemdos.c and jmemdosa.asm.
-# If you change this, you'll need to modify the linker response file
-# name list, below, by hand!
-SYSDEPMEM= jmemdos.obj jmemdosa.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj
-
-# need linker response file because file list > 128 chars
-RFILE = libjpeg.ans
-
-
-all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-
-libjpeg.lib: $(LIBOBJECTS) $(RFILE)
-	del libjpeg.lib
-	lib @$(RFILE)
-
-# linker response file for building libjpeg.lib
-$(RFILE) : makefile
-	del $(RFILE)
-	echo libjpeg.lib >$(RFILE)
-# silly want-to-create-it prompt:
-	echo y >>$(RFILE)
-	echo +jcapimin.obj +jcapistd.obj +jctrans.obj +jcparam.obj & >>$(RFILE)
-	echo +jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj & >>$(RFILE)
-	echo +jcmainct.obj +jcprepct.obj +jccoefct.obj & >>$(RFILE)
-	echo +jccolor.obj +jcsample.obj +jchuff.obj +jcphuff.obj & >>$(RFILE)
-	echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE)
-	echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE)
-	echo +jdtrans.obj +jdatasrc.obj +jdmaster.obj +jdinput.obj & >>$(RFILE)
-	echo +jdmarker.obj +jdhuff.obj +jdphuff.obj +jdmainct.obj & >>$(RFILE)
-	echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE)
-	echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE)
-	echo +jidctred.obj +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE)
-	echo +jquant2.obj +jdmerge.obj +jcomapi.obj +jutils.obj & >>$(RFILE)
-	echo +jerror.obj +jmemmgr.obj +jmemdos.obj +jmemdosa.obj ; >>$(RFILE)
-
-cjpeg.exe: $(COBJECTS) libjpeg.lib
-	echo $(COBJECTS) >cjpeg.lst
-	link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ;
-	del cjpeg.lst
-
-djpeg.exe: $(DOBJECTS) libjpeg.lib
-	echo $(DOBJECTS) >djpeg.lst
-	link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ;
-	del djpeg.lst
-
-jpegtran.exe: $(TROBJECTS) libjpeg.lib
-	link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ;
-
-rdjpgcom.exe: rdjpgcom.c
-	$(CC) -AS -O -W3 rdjpgcom.c
-
-# wrjpgcom needs large model so it can malloc a 64K chunk
-wrjpgcom.exe: wrjpgcom.c
-	$(CC) -AL -O -W3 wrjpgcom.c
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	del *.obj
-	del libjpeg.lib
-	del cjpeg.exe
-	del djpeg.exe
-	del jpegtran.exe
-	del rdjpgcom.exe
-	del wrjpgcom.exe
-	del testout*.*
-
-test: cjpeg.exe djpeg.exe jpegtran.exe
-	del testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -gif -outfile testout.gif  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-	fc /b testimg.ppm testout.ppm
-	fc /b testimg.gif testout.gif
-	fc /b testimg.jpg testout.jpg
-	fc /b testimg.ppm testoutp.ppm
-	fc /b testimgp.jpg testoutp.jpg
-	fc /b testorig.jpg testoutt.jpg
-
-
-jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
-rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-jmemdosa.obj : jmemdosa.asm
-	masm /mx $*;

makefile.mms

@@ -1,214 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for use with MMS on Digital VMS systems.
-# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu)
-# and Tim Bell (tbell@netcom.com) for their help.
-
-# Read installation instructions before saying "MMS" !!
-
-# You may need to adjust these cc options:
-CFLAGS= $(CFLAGS) /NoDebug /Optimize
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via /Define switches here.
-.ifdef ALPHA
-OPT=
-.else
-OPT= ,Sys$Disk:[]MAKVMS.OPT/Option
-.endif
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.obj
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.obj jcapistd.obj jctrans.obj jcparam.obj jdatadst.obj \
-        jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj jcprepct.obj \
-        jccoefct.obj jccolor.obj jcsample.obj jchuff.obj jcphuff.obj \
-        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
-# decompression library object files
-DLIBOBJECTS= jdapimin.obj jdapistd.obj jdtrans.obj jdatasrc.obj \
-        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdphuff.obj \
-        jdmainct.obj jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj \
-        jidctflt.obj jidctint.obj jidctred.obj jdsample.obj jdcolor.obj \
-        jquant1.obj jquant2.obj jdmerge.obj
-# These objectfiles are included in libjpeg.olb
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
-        rdswitch.obj cdjpeg.obj
-DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
-        rdcolmap.obj cdjpeg.obj
-TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj
-# objectfile lists with commas --- what a crock
-COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\
-          rdswitch.obj,cdjpeg.obj
-DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\
-          rdcolmap.obj,cdjpeg.obj
-TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj
-LIBOBJLIST= jcapimin.obj,jcapistd.obj,jctrans.obj,jcparam.obj,jdatadst.obj,\
-          jcinit.obj,jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,\
-          jccoefct.obj,jccolor.obj,jcsample.obj,jchuff.obj,jcphuff.obj,\
-          jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,jdapimin.obj,\
-          jdapistd.obj,jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,\
-          jdmarker.obj,jdhuff.obj,jdphuff.obj,jdmainct.obj,jdcoefct.obj,\
-          jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,jidctint.obj,\
-          jidctred.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\
-          jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM)
-
-
-.first
-	@- Define /NoLog Sys Sys$Library
-
-ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
-	@ Continue
-
-libjpeg.olb : $(LIBOBJECTS)
-	Library /Create libjpeg.olb $(LIBOBJLIST)
-
-cjpeg.exe : $(COBJECTS) libjpeg.olb
-	$(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT)
-
-djpeg.exe : $(DOBJECTS) libjpeg.olb
-	$(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT)
-
-jpegtran.exe : $(TROBJECTS) libjpeg.olb
-	$(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT)
-
-rdjpgcom.exe : rdjpgcom.obj
-	$(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT)
-
-wrjpgcom.exe : wrjpgcom.obj
-	$(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT)
-
-jconfig.h : jconfig.vms
-	@- Copy jconfig.vms jconfig.h
-
-clean :
-	@- Set Protection = Owner:RWED *.*;-1
-	@- Set Protection = Owner:RWED *.OBJ
-	- Purge /NoLog /NoConfirm *.*
-	- Delete /NoLog /NoConfirm *.OBJ;
-
-test : cjpeg.exe djpeg.exe jpegtran.exe
-	mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg
-	mcr sys$disk:[]djpeg -dct int -gif -outfile testout.gif testorig.jpg
-	mcr sys$disk:[]cjpeg -dct int      -outfile testout.jpg testimg.ppm
-	mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg
-	- Backup /Compare/Log	  testimg.ppm testout.ppm
-	- Backup /Compare/Log	  testimg.gif testout.gif
-	- Backup /Compare/Log	  testimg.jpg testout.jpg
-	- Backup /Compare/Log	  testimg.ppm testoutp.ppm
-	- Backup /Compare/Log	  testimgp.jpg testoutp.jpg
-	- Backup /Compare/Log	  testorig.jpg testoutt.jpg
-
-
-jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.obj : jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.obj : jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.obj : jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h
-rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

makefile.sas

@@ -1,244 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is for Amiga systems using SAS C 6.0 and up.
-# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= sc
-
-# You may need to adjust these cc options:
-# Uncomment the following lines for generic 680x0 version
-ARCHFLAGS= cpu=any
-SUFFIX=
-
-# Uncomment the following lines for 68030-only version
-#ARCHFLAGS= cpu=68030
-#SUFFIX=.030
-
-CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \
-	ignore=104 ignore=304 ignore=306
-# ignore=104 disables warnings for mismatched const qualifiers
-# ignore=304 disables warnings for variables being optimized out
-# ignore=306 disables warnings for the inlining of functions
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via define switches here.
-
-# Link-time cc options:
-LDFLAGS= SC SD ND BATCH
-
-# To link any special libraries, add the necessary commands here.
-LDLIBS= LIB:scm.lib LIB:sc.lib
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Amiga we recommend jmemname.o.
-SYSDEPMEM= jmemname.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= slink
-# file deletion command
-RM= delete quiet
-# library (.lib) file creation command
-AR= oml
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.lib
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o
-
-
-all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX)
-
-libjpeg.lib: $(LIBOBJECTS)
-	-$(RM) libjpeg.lib
-	$(AR) libjpeg.lib r $(LIBOBJECTS)
-
-cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib
-	$(LN) <WITH <
-$(LDFLAGS)
-TO cjpeg$(SUFFIX)
-FROM LIB:c.o $(COBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-djpeg$(SUFFIX): $(DOBJECTS) libjpeg.lib
-	$(LN) <WITH <
-$(LDFLAGS)
-TO djpeg$(SUFFIX)
-FROM LIB:c.o $(DOBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-jpegtran$(SUFFIX): $(TROBJECTS) libjpeg.lib
-	$(LN) <WITH <
-$(LDFLAGS)
-TO jpegtran$(SUFFIX)
-FROM LIB:c.o $(TROBJECTS)
-LIB libjpeg.lib $(LDLIBS)
-<
-
-rdjpgcom$(SUFFIX): rdjpgcom.o
-	$(LN) <WITH <
-$(LDFLAGS)
-TO rdjpgcom$(SUFFIX)
-FROM LIB:c.o rdjpgcom.o
-LIB $(LDLIBS)
-<
-
-wrjpgcom$(SUFFIX): wrjpgcom.o
-	$(LN) <WITH <
-$(LDFLAGS)
-TO wrjpgcom$(SUFFIX)
-FROM LIB:c.o wrjpgcom.o
-LIB $(LDLIBS)
-<
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	-$(RM) *.o cjpeg djpeg jpegtran cjpeg.030 djpeg.030 jpegtran.030
-	-$(RM) rdjpgcom wrjpgcom rdjpgcom.030 wrjpgcom.030
-	-$(RM) libjpeg.lib core testout*.*
-
-test: cjpeg djpeg jpegtran
-	-$(RM) testout*.*
-	djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	djpeg -dct int -gif -outfile testout.gif  testorig.jpg
-	cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.gif testout.gif
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

makefile.unix

@@ -1,224 +0,0 @@
-# Makefile for Independent JPEG Group's software
-
-# This makefile is suitable for Unix-like systems with non-ANSI compilers.
-# If you have an ANSI compiler, makefile.ansi is a better starting point.
-
-# Read installation instructions before saying "make" !!
-
-# The name of your C compiler:
-CC= cc
-
-# You may need to adjust these cc options:
-CFLAGS= -O
-# Generally, we recommend defining any configuration symbols in jconfig.h,
-# NOT via -D switches here.
-# However, any special defines for ansi2knr.c may be included here:
-ANSI2KNRFLAGS= 
-
-# Link-time cc options:
-LDFLAGS= 
-
-# To link any special libraries, add the necessary -l commands here.
-LDLIBS= 
-
-# Put here the object file name for the correct system-dependent memory
-# manager file.  For Unix this is usually jmemnobs.o, but you may want
-# to use jmemansi.o or jmemname.o if you have limited swap space.
-SYSDEPMEM= jmemnobs.o
-
-# miscellaneous OS-dependent stuff
-# linker
-LN= $(CC)
-# file deletion command
-RM= rm -f
-# file rename command
-MV= mv
-# library (.a) file creation command
-AR= ar rc
-# second step in .a creation (use "touch" if not needed)
-AR2= ranlib
-
-# End of configurable options.
-
-
-# source files: JPEG library proper
-LIBSOURCES= jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c \
-        jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c \
-        jcphuff.c jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c \
-        jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c \
-        jdinput.c jdmainct.c jdmarker.c jdmaster.c jdmerge.c jdphuff.c \
-        jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c jfdctfst.c \
-        jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c jquant1.c \
-        jquant2.c jutils.c jmemmgr.c
-# memmgr back ends: compile only one of these into a working library
-SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
-# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
-APPSOURCES= cjpeg.c djpeg.c jpegtran.c cdjpeg.c rdcolmap.c rdswitch.c \
-        rdjpgcom.c wrjpgcom.c rdppm.c wrppm.c rdgif.c wrgif.c rdtarga.c \
-        wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
-SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
-# files included by source files
-INCLUDES= jchuff.h jdhuff.h jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-        jpegint.h jpeglib.h jversion.h cdjpeg.h cderror.h
-# documentation, test, and support files
-DOCS= README install.doc usage.doc cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
-        wrjpgcom.1 wizard.doc example.c libjpeg.doc structure.doc \
-        coderules.doc filelist.doc change.log
-MKFILES= configure makefile.cfg makefile.ansi makefile.unix makefile.bcc \
-        makefile.mc6 makefile.dj makefile.wat makcjpeg.st makdjpeg.st \
-        makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \
-        makefile.vms makvms.opt
-CONFIGFILES= jconfig.cfg jconfig.manx jconfig.sas jconfig.st jconfig.bcc \
-        jconfig.mc6 jconfig.dj jconfig.wat jconfig.vms
-OTHERFILES= jconfig.doc ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm
-TESTFILES= testorig.jpg testimg.ppm testimg.gif testimg.jpg testprog.jpg \
-        testimgp.jpg
-DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
-        $(OTHERFILES) $(TESTFILES)
-# library object files common to compression and decompression
-COMOBJECTS= jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM)
-# compression library object files
-CLIBOBJECTS= jcapimin.o jcapistd.o jctrans.o jcparam.o jdatadst.o jcinit.o \
-        jcmaster.o jcmarker.o jcmainct.o jcprepct.o jccoefct.o jccolor.o \
-        jcsample.o jchuff.o jcphuff.o jcdctmgr.o jfdctfst.o jfdctflt.o \
-        jfdctint.o
-# decompression library object files
-DLIBOBJECTS= jdapimin.o jdapistd.o jdtrans.o jdatasrc.o jdmaster.o \
-        jdinput.o jdmarker.o jdhuff.o jdphuff.o jdmainct.o jdcoefct.o \
-        jdpostct.o jddctmgr.o jidctfst.o jidctflt.o jidctint.o jidctred.o \
-        jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o
-# These objectfiles are included in libjpeg.a
-LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
-# object files for sample applications (excluding library files)
-COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \
-        cdjpeg.o
-DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \
-        cdjpeg.o
-TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o
-
-
-all: ansi2knr libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-
-# This rule causes ansi2knr to be invoked.
-.c.o:
-	./ansi2knr $*.c T$*.c
-	$(CC) $(CFLAGS) -c T$*.c
-	$(RM) T$*.c $*.o
-	$(MV) T$*.o $*.o
-
-ansi2knr: ansi2knr.c
-	$(CC) $(CFLAGS) $(ANSI2KNRFLAGS) -o ansi2knr ansi2knr.c
-
-libjpeg.a: ansi2knr $(LIBOBJECTS)
-	$(RM) libjpeg.a
-	$(AR) libjpeg.a  $(LIBOBJECTS)
-	$(AR2) libjpeg.a
-
-cjpeg: ansi2knr $(COBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS)
-
-djpeg: ansi2knr $(DOBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS)
-
-jpegtran: ansi2knr $(TROBJECTS) libjpeg.a
-	$(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS)
-
-rdjpgcom: rdjpgcom.o
-	$(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS)
-
-wrjpgcom: wrjpgcom.o
-	$(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS)
-
-jconfig.h: jconfig.doc
-	echo You must prepare a system-dependent jconfig.h file.
-	echo Please read the installation directions in install.doc.
-	exit 1
-
-clean:
-	$(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom
-	$(RM) ansi2knr core testout*
-
-test: cjpeg djpeg jpegtran
-	$(RM) testout*
-	./djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
-	./djpeg -dct int -gif -outfile testout.gif  testorig.jpg
-	./cjpeg -dct int -outfile testout.jpg  testimg.ppm
-	./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
-	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
-	./jpegtran -outfile testoutt.jpg testprog.jpg
-	cmp testimg.ppm testout.ppm
-	cmp testimg.gif testout.gif
-	cmp testimg.jpg testout.jpg
-	cmp testimg.ppm testoutp.ppm
-	cmp testimgp.jpg testoutp.jpg
-	cmp testorig.jpg testoutt.jpg
-
-
-jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcphuff.o: jcphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jchuff.h
-jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
-jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdphuff.o: jdphuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdhuff.h
-jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
-jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jidctred.o: jidctred.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
-jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
-jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
-cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
-cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h
-wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h
-rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
-wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h