Can't assume that current directory is in PATH

git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/branches/1.1.x@614 632fc199-4ca6-4c93-a231-07263d6284db

BUILDING.txt

@@ -1,70 +1,84 @@
 *******************************************************************************
-**     Building on Unix Platforms, Cygwin, and MinGW
+**     Building on Unix Platforms (including Cygwin)
 *******************************************************************************
 
+
 ==================
 Build Requirements
 ==================
 
 -- autoconf 2.56 or later
-   * If using MinGW, this can be obtained by installing the MSYS DTK
-
 -- automake 1.7 or later
-   * If using MinGW, this can be obtained by installing the MSYS DTK
-
 -- libtool 1.4 or later
-   * If using MinGW, this can be obtained by installing the MSYS DTK
 
 -- NASM
-   * 0.98 or later is required for a 32-bit build
-   * NASM 2.05 or later is required for a 64-bit build
-   * NASM 2.07 or later is required for a 64-bit build on OS/X (10.6 "Snow
-     Leopard" or later.)  This can be obtained from MacPorts
-     (http://www.macports.org/).
+   * 0.98, or 2.01 or later is required for a 32-bit build
+   * NASM 2.00 or later is required for a 64-bit build
+   * NASM 2.07 or later is required for a 64-bit build on OS X.  This can be
+     obtained from MacPorts (http://www.macports.org/).
 
-   The NASM 2.05 RPMs do not work on older Linux systems, such as Enterprise
-   Linux 4.  On such systems, you can easily build and install NASM 2.05
-   from the source RPM by executing the following as root:
+   The binary RPMs released by the NASM project do not work on older Linux
+   systems, such as Red Hat Enterprise Linux 4.  On such systems, you can
+   easily build and install NASM from a source RPM by downloading one of the
+   SRPMs from
+
+   http://www.nasm.us/pub/nasm/releasebuilds
+
+   and executing the following as root:
 
      ARCH=`uname -m`
-     wget http://www.nasm.us/pub/nasm/releasebuilds/2.05.01/nasm-2.05.01-1.src.rpm
-     rpmbuild --rebuild nasm-2.05.01-1.src.rpm
-     rpm -Uvh /usr/src/redhat/RPMS/$ARCH/nasm-2.05.01-1.$ARCH.rpm
+     rpmbuild --rebuild nasm-{version}.src.rpm
+     rpm -Uvh /usr/src/redhat/RPMS/$ARCH/nasm-{version}.$ARCH.rpm
 
-   NOTE: NASM build will fail if texinfo is not installed.
+   NOTE: the NASM build will fail if texinfo is not installed.
 
 -- GCC v4.1 or later recommended for best performance
 
+
+==================
+Out-of-Tree Builds
+==================
+
+Binary objects, libraries, and executables are generated in the same directory
+from which configure was executed (the "binary directory"), and this directory
+need not necessarily be the same as the libjpeg-turbo source directory.  You
+can create multiple independent binary directories, in which different versions
+of libjpeg-turbo can be built from the same source tree using different
+compilers or settings.  In the sections below, {build_directory} refers to the
+binary directory, whereas {source_directory} refers to the libjpeg-turbo source
+directory.  For in-tree builds, these directories are the same.
+
+
 ======================
 Building libjpeg-turbo
 ======================
 
-The following procedure will build libjpeg-turbo on Linux, 32-bit OS X, and
-Solaris/x86 systems (on Solaris, this generates a 32-bit library.  See below
-for 64-bit build instructions.)
+The following procedure will build libjpeg-turbo on Linux, FreeBSD, 32-bit
+OS X, Cygwin, and Solaris/x86 systems (on Solaris, this generates a 32-bit
+library.  See below for 64-bit build instructions.)
 
-  cd libjpeg-turbo
+  cd {source_directory}
   autoreconf -fiv
-  sh ./configure
+  cd {build_directory}
+  sh {source_directory}/configure [additional configure flags]
   make
 
-NOTE: Running autoreconf is only necessary if building libjpeg-turbo from the
-SVN repository.
+NOTE: Running autoreconf in the source directory is only necessary if building
+libjpeg-turbo from the SVN repository.
 
 This will generate the following files under .libs/
 
   libjpeg.a
       Static link library for libjpeg-turbo
 
-  libjpeg.so.62.0.0 (Linux, Solaris)
-  libjpeg.62.dylib (OS X)
-  libjpeg-62.dll (MinGW)
-  cygjpeg-62.dll (Cygwin)
+  libjpeg.so.{version} (Linux, Solaris)
+  libjpeg.{version}.dylib (OS X)
+  cygjpeg-{version}.dll (Cygwin)
       Shared library for libjpeg-turbo
 
   libjpeg.so (Linux, Solaris)
   libjpeg.dylib (OS X)
-  libjpeg.dll.a (Cygwin, MinGW)
+  libjpeg.dll.a (Cygwin)
       Development stub for libjpeg-turbo shared library
 
   libturbojpeg.a
@@ -74,13 +88,39 @@ This will generate the following files under .libs/
   libturbojpeg.dylib (OS X)
       Shared library and development stub for TurboJPEG/OSS
 
-  libturbojpeg.dll (MinGW)
   cygturbojpeg.dll (Cygwin)
       Shared library for TurboJPEG/OSS
 
-  libturbojpeg.dll.a (Cygwin, MinGW)
+  libturbojpeg.dll.a (Cygwin)
       Development stub for TurboJPEG/OSS shared library
 
+{version} is 62.0.0, 7.0.0, or 8.0.2, depending on whether libjpeg v6b
+(default), v7, or v8 emulation is enabled.  If using Cygwin, {version} is
+62, 7, or 8.
+
+
+libjpeg v7 or v8 Emulation
+--------------------------
+
+Add --with-jpeg7 to the configure command line to build a version of
+libjpeg-turbo that is compatible with libjpeg v7.  Add --with-jpeg8 to the
+configure command to build a version of libjpeg-turbo that is compatible with
+libjpeg v8.  See README-turbo.txt for more information on libjpeg v7 and v8
+emulation.
+
+
+Arithmetic Coding Support
+-------------------------
+
+Since the patent on arithmetic coding has expired, this functionality has been
+included in this release of libjpeg-turbo.  libjpeg-turbo's implementation is
+based on the implementation in libjpeg v8, but it works when emulating libjpeg
+v7 or v6b as well.  The default is to enable both arithmetic encoding and
+decoding, but those who have philosophical objections to arithmetic coding can
+add --without-arith-enc or --without-arith-dec to the configure command line to
+disable encoding or decoding (respectively.)
+
+
 ========================
 Installing libjpeg-turbo
 ========================
@@ -107,48 +147,64 @@ a non-system directory and manipulate the LD_LIBRARY_PATH or create sym links
 to force applications to use libjpeg-turbo instead of libjpeg.  See
 README-turbo.txt for more information.
 
+
 =============
 Build Recipes
 =============
 
+
 32-bit Library Build on 64-bit Linux
 ------------------------------------
 
 Add
 
-  --host i686-pc-linux-gnu CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32'
+  --host i686-pc-linux-gnu CFLAGS='-O3 -m32' LDFLAGS=-m32
 
 to the configure command line.
 
 
-64-bit Library Build on 64-bit OS/X
+64-bit Library Build on 64-bit OS X
 -----------------------------------
 
 Add
 
-  --host x86_64-apple-darwin10.0.0 NASM=/opt/local/bin/nasm
+  --host x86_64-apple-darwin NASM=/opt/local/bin/nasm
 
-to the configure command line.  NASM 2.07 from MacPorts must be installed.
+to the configure command line.  NASM 2.07 or later from MacPorts must be
+installed.
 
 
-32-bit Library Build on 64-bit OS/X
+32-bit Library Build on 64-bit OS X
 -----------------------------------
 
 Add
 
-  CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32' LDFLAGS=-m32
+  CFLAGS='-O3 -m32' LDFLAGS=-m32
 
 to the configure command line.
 
 
-32-bit Backward-Compatible Library Build on 64-bit OS/X
+64-bit Backward-Compatible Library Build on 64-bit OS X
 -------------------------------------------------------
 
+Add
+
+  --host x86_64-apple-darwin NASM=/opt/local/bin/nasm \
+  CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4 -O3' \
+    LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4'
+
+to the configure command line.  The OS X 10.4 SDK, and NASM 2.07 or later from
+MacPorts, must be installed.
+
+
+32-bit Backward-Compatible Library Build on OS X
+------------------------------------------------
+
 Add
 
   CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-    -mmacosx-version-min=10.4 -O3 -m32' \
-    CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
     -mmacosx-version-min=10.4 -O3 -m32' \
     LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
     -mmacosx-version-min=10.4 -m32'
@@ -161,20 +217,21 @@ to the configure command line.  The OS X 10.4 SDK must be installed.
 
 Add
 
-  --host x86_64-pc-solaris CFLAGS='-O3 -m64' CXXFLAGS='-O3 -m64' LDFLAGS=-m64
+  --host x86_64-pc-solaris CFLAGS='-O3 -m64' LDFLAGS=-m64
 
 to the configure command line.
 
 
-MinGW Build on Cygwin
----------------------
+32-bit Library Build on 64-bit FreeBSD
+--------------------------------------
 
 Add
 
-  --host mingw32
+  --host i386-unknown-freebsd CC='gcc -B /usr/lib32' CFLAGS='-O3 -m32' \
+    LDFLAGS='-B/usr/lib32'
 
-to the configure command line.  This will produce libraries which do not
-depend on cygwin1.dll or other Cygwin DLL's.
+to the configure command line.  NASM 2.07 or later from FreeBSD ports must be
+installed.
 
 
 Sun Studio
@@ -182,83 +239,287 @@ Sun Studio
 
 Add
 
-  CC=cc CXX=CC
+  CC=cc
 
 to the configure command line.  libjpeg-turbo will automatically be built with
-the maximum optimization level (-xO5) unless you override CFLAGS and CXXFLAGS.
+the maximum optimization level (-xO5) unless you override CFLAGS.
 
 To build a 64-bit version of libjpeg-turbo using Sun Studio, add
 
-  --host x86_64-pc-solaris CC=cc CXX=CC CFLAGS='-xO5 -m64' \
-    CXXFLAGS='-xO5 -m64' LDFLAGS=-m64
+  --host x86_64-pc-solaris CC=cc CFLAGS='-xO5 -m64' LDFLAGS=-m64
 
 to the configure command line.
 
 
+MinGW Build on Cygwin
+---------------------
+
+Use CMake (see recipes below)
+
+
+
 *******************************************************************************
-**     Building on Windows (Visual C++)
+**     Building on Windows (Visual C++ or MinGW)
 *******************************************************************************
 
+
 ==================
 Build Requirements
 ==================
 
--- GNU Make v3.7 or later
-   * Can be found in MSYS (http://www.mingw.org/download.shtml) or
-     Cygwin (http://www.cygwin.com/)
+-- CMake (http://www.cmake.org) v2.6 or later
 
--- Windows SDK for Windows Server 2008 and .NET Framework 3.5 (or a later
-   version)
+-- Microsoft Visual C++ 2005 or later
 
-   http://msdn.microsoft.com/en-us/windows/dd146047.aspx
+   If you don't already have Visual C++, then the easiest way to get it is by
+   installing the Windows SDK:
 
-   * The Windows SDK includes both 32-bit and 64-bit Visual C++ compilers and
-     everything necessary to build libjpeg-turbo.  If you do not already have
-     Visual C++ installed, then this is the recommended solution.  Also tested
-     with Microsoft Visual C++ 2008 Express Edition (both are free downloads.)
-   * Add the compiler and SDK binary directories (for instance,
-     c:\Program Files\Microsoft Visual Studio 9.0\VC\BIN;
-     c:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE;
-     c:\Program Files\Microsoft SDKs\Windows\v6.1\bin)
-     to the system or user PATH environment variable prior to building
-     libjpeg-turbo.
-   * Add the compiler and SDK include directories (for instance,
-     c:\Program Files\Microsoft Visual Studio 9.0\VC\INCLUDE;
-     c:\Program Files\Microsoft SDKs\Windows\v6.1\include)
-     to the system or user INCLUDE environment variable prior to building
-     libjpeg-turbo.
-   * Add the compiler library directory (for instance,
-     c:\Program Files\Microsoft Visual Studio 9.0\VC\LIB;
-     c:\Program Files\Microsoft SDKs\Windows\v6.1\lib)
-     to the system or user LIB environment variable prior to building
-     libjpeg-turbo.
+   http://msdn.microsoft.com/en-us/windows/bb980924.aspx
+
+   The Windows SDK includes both 32-bit and 64-bit Visual C++ compilers and
+   everything necessary to build libjpeg-turbo.
+
+   * For 32-bit builds, you can also use Microsoft Visual C++ Express
+     Edition.  Visual C++ Express Edition is a free download.
+   * If you intend to build libjpeg-turbo from the command line, then add the
+     appropriate compiler and SDK directories to the INCLUDE, LIB, and PATH
+     environment variables.  This is generally accomplished by executing
+     vcvars32.bat or vcvars64.bat and SetEnv.cmd.  vcvars32.bat and
+     vcvars64.bat are part of Visual C++ and are located in the same directory
+     as the compiler.  SetEnv.cmd is part of the Windows SDK.  You can pass
+     optional arguments to SetEnv.cmd to specify a 32-bit or 64-bit build
+     environment.
+
+... OR ...
+
+-- MinGW
+
+   GCC v4.1 or later recommended for best performance
+
+-- NASM (http://www.nasm.us/) 0.98 or later (NASM 2.05 or later is required for
+   a 64-bit build)
+
+
+==================
+Out-of-Tree Builds
+==================
+
+Binary objects, libraries, and executables are generated in the same directory
+from which cmake was executed (the "binary directory"), and this directory need
+not necessarily be the same as the libjpeg-turbo source directory.  You can
+create multiple independent binary directories, in which different versions of
+libjpeg-turbo can be built from the same source tree using different compilers
+or settings.  In the sections below, {build_directory} refers to the binary
+directory, whereas {source_directory} refers to the libjpeg-turbo source
+directory.  For in-tree builds, these directories are the same.
 
--- NASM (http://www.nasm.us/) 0.98 or later
 
 ======================
 Building libjpeg-turbo
 ======================
 
-  cd libjpeg-turbo
-  make -f win/Makefile
 
-This will generate the following files under libjpeg-turbo\windows\:
+Visual C++ (Command Line)
+-------------------------
 
-  jpeg-static.lib        Static link library for libjpeg-turbo
-  jpeg62.dll             Shared library for libjpeg-turbo
-  jpeg.lib               Development stub for libjpeg-turbo shared library
-  turbojpeg-static.lib   Static link library for TurboJPEG/OSS
-  turbojpeg.dll          Shared library for TurboJPEG/OSS
-  turbojpeg.lib          Development stub for TurboJPEG/OSS shared library
+  cd {build_directory}
+  cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release {source_directory}
+  nmake
 
-#If a 64-bit Windows platform is detected, then the build system will attempt
-#to build a 64-bit version of libjpeg-turbo.  You can override this by running
-#
-#  make -f win/Makefile WIN64=no
+This will build either a 32-bit or a 64-bit version of libjpeg-turbo, depending
+on which version of cl.exe is in the PATH.
 
-NOTE:  For unknown reasons, Win64 support doesn't work yet, so at the moment,
-you have to run 'make -f win/Makefile WIN64=yes' to get a 64-bit build on
-64-bit Windows.  The paragraph above will apply once Win64 support is working.
+The following files will be generated under {build_directory}:
+
+  jpeg-static.lib
+      Static link library for libjpeg-turbo
+  sharedlib/jpeg{version}.dll
+      DLL for libjpeg-turbo
+  sharedlib/jpeg.lib
+      Import library for libjpeg-turbo DLL
+  turbojpeg-static.lib
+      Static link library for TurboJPEG/OSS
+  turbojpeg.dll
+      DLL for TurboJPEG/OSS
+  turbojpeg.lib
+      Import library for TurboJPEG/OSS DLL
+
+{version} is 62, 7, or 8, depending on whether libjpeg v6b (default), v7, or
+v8 emulation is enabled.
+
+
+Visual C++ (IDE)
+----------------
+
+Choose the appropriate CMake generator option for your version of Visual Studio
+(run "cmake" with no arguments for a list of available generators.)  For
+instance:
+
+  cd {build_directory}
+  cmake -G "Visual Studio 9 2008" {source_directory}
+
+You can then open ALL_BUILD.vcproj in Visual Studio and build one of the
+configurations in that project ("Debug", "Release", etc.) to generate a full
+build of libjpeg-turbo.
+
+This will generate the following files under {build_directory}:
+
+  {configuration}/jpeg-static.lib
+      Static link library for libjpeg-turbo
+  sharedlib/{configuration}/jpeg{version}.dll
+      DLL for libjpeg-turbo
+  sharedlib/{configuration}/jpeg.lib
+      Import library for libjpeg-turbo DLL
+  {configuration}/turbojpeg-static.lib
+      Static link library for TurboJPEG/OSS
+  {configuration}/turbojpeg.dll
+      DLL for TurboJPEG/OSS
+  {configuration}/turbojpeg.lib
+      Import library for TurboJPEG/OSS DLL
+
+{configuration} is Debug, Release, RelWithDebInfo, or MinSizeRel, depending on
+the configuration you built in the IDE, and {version} is 62, 7, or 8,
+depending on whether libjpeg v6b (default), v7, or v8 emulation is enabled.
+
+
+MinGW
+-----
+
+  cd {build_directory}
+  cmake -G "MSYS Makefiles" {source_directory}
+  make
+
+This will generate the following files under {build_directory}
+
+  libjpeg.a
+      Static link library for libjpeg-turbo
+  sharedlib/libjpeg-{version}.dll
+      DLL for libjpeg-turbo
+  sharedlib/libjpeg.dll.a
+      Import library for libjpeg-turbo DLL
+  libturbojpeg.a
+      Static link library for TurboJPEG/OSS
+  libturbojpeg.dll
+      DLL for TurboJPEG/OSS
+  libturbojpeg.dll.a
+      Import library for TurboJPEG/OSS DLL
+
+{version} is 62, 7, or 8, depending on whether libjpeg v6b (default), v7, or
+v8 emulation is enabled.
+
+
+Debug Build
+-----------
+
+Add "-DCMAKE_BUILD_TYPE=Debug" to the cmake command line.  Or, if building with
+NMake, remove "-DCMAKE_BUILD_TYPE=Release" (Debug builds are the default with
+NMake.)
+
+
+libjpeg v7 or v8 Emulation
+--------------------------
+
+Add "-DWITH_JPEG7=1" to the cmake command line to build a version of
+libjpeg-turbo that is compatible with libjpeg v7.  Add "-DWITH_JPEG8=1" to the
+cmake command to build a version of libjpeg-turbo that is compatible with
+libjpeg v8.  See README-turbo.txt for more information on libjpeg v7 and v8
+emulation.
+
+
+Arithmetic Coding Support
+-------------------------
+
+Since the patent on arithmetic coding has expired, this functionality has been
+included in this release of libjpeg-turbo.  libjpeg-turbo's implementation is
+based on the implementation in libjpeg v8, but it works when emulating libjpeg
+v7 or v6b as well.  The default is to enable both arithmetic encoding and
+decoding, but those who have philosophical objections to arithmetic coding can
+add "-DWITH_ARITH_ENC=0" or "-DWITH_ARITH_DEC=0" to the cmake command line to
+disable encoding or decoding (respectively.)
+
+
+========================
+Installing libjpeg-turbo
+========================
+
+You can use the build system to install libjpeg-turbo into a directory of your
+choosing (as opposed to creating an installer.)  To do this, add:
+
+  -DCMAKE_INSTALL_PREFIX={install_directory}
+
+to the cmake command line.
+
+For example,
+
+  cmake -G "NMake Makefiles" -DCMAKE_BUILD_TYPE=Release \
+    -DCMAKE_INSTALL_PREFIX=c:\libjpeg-turbo {source_directory}
+  nmake install
+
+will install the header files in c:\libjpeg-turbo\include, the library files
+in c:\libjpeg-turbo\lib, the DLL's in c:\libjpeg-turbo\bin, and the
+documentation in c:\libjpeg-turbo\doc.
+
+
+=============
+Build Recipes
+=============
+
+
+64-bit MinGW Build on Cygwin
+----------------------------
+
+  cd {build_directory}
+  CC=/usr/bin/x86_64-w64-mingw32-gcc \
+    cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
+    -DCMAKE_AR=/usr/bin/x86_64-w64-mingw32-ar \
+    -DCMAKE_RANLIB=/usr/bin/x86_64-w64-mingw32-ranlib {source_directory}
+  make
+
+This produces a 64-bit build of libjpeg-turbo that does not depend on
+cygwin1.dll or other Cygwin DLL's.  The mingw64-x86_64-gcc-core and
+mingw64-x86_64-gcc-g++ packages (and their dependencies) must be installed.
+
+
+32-bit MinGW Build on Cygwin
+----------------------------
+
+  cd {build_directory}
+  CC=/usr/bin/i686-w64-mingw32-gcc \
+    cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
+    -DDCMAKE_AR=/usr/bin/i686-w64-mingw32-ar \
+    -DCMAKE_RANLIB=/usr/bin/i686-w64-mingw32-ranlib {source_directory}
+  make
+
+This produces a 32-bit build of libjpeg-turbo that does not depend on
+cygwin1.dll or other Cygwin DLL's.  The mingw64-i686-gcc-core and
+mingw64-i686-gcc-g++ packages (and their dependencies) must be installed.
+
+
+MinGW-w64 Build on Windows
+--------------------------
+
+This produces a 64-bit build of libjpeg-turbo using the "native" MinGW-w64
+toolchain (which is faster than the Cygwin version):
+
+  cd {build_directory}
+  CC={mingw-w64_binary_path}/x86_64-w64-mingw32-gcc \
+    cmake -G "MSYS Makefiles" \
+    -DCMAKE_AR={mingw-w64_binary_path}/x86_64-w64-mingw32-ar \
+    -DCMAKE_RANLIB={mingw-w64_binary_path}/x86_64-w64-mingw32-ranlib \
+    {source_directory}
+  make
+
+
+MinGW Build on Linux
+--------------------
+
+  cd {build_directory}
+  CC={mingw_binary_path}/i386-mingw32-gcc \
+    cmake -G "Unix Makefiles" -DCMAKE_SYSTEM_NAME=Windows \
+    -DCMAKE_AR={mingw_binary_path}/i386-mingw32-ar \
+    -DCMAKE_RANLIB={mingw_binary_path}/i386-mingw32-ranlib \
+    {source_directory}
+  make
 
 
 *******************************************************************************
@@ -267,14 +528,18 @@ you have to run 'make -f win/Makefile WIN64=yes' to get a 64-bit build on
 
 The following commands can be used to create various types of release packages:
 
+
+Unix
+----
+
 make rpm
 
-  Create RedHat-style binary RPM package.  Requires RPM v4 or later.
+  Create Red Hat-style binary RPM package.  Requires RPM v4 or later.
 
 make srpm
 
   This runs 'make dist' to create a pristine source tarball, then creates a
-  RedHat-style source RPM package from the tarball.  Requires RPM v4 or later.
+  Red Hat-style source RPM package from the tarball.  Requires RPM v4 or later.
 
 make deb
 
@@ -285,22 +550,55 @@ make dmg
   Create Macintosh package/disk image.  This requires the PackageMaker
   application, which must be installed in /Developer/Applications/Utilities.
 
-make udmg
+make udmg [BUILDDIR32={32-bit build directory}]
 
-  On 64-bit OS X (10.6 "Snow Leopard" or later), this creates a version of the
-  Macintosh package/disk image which contains universal i386/x86-64 binaries.
-  The 32-bit fork of these binaries is backward compatible with OS X 10.4 and
-  later, whereas the 64-bit fork is compatible with OS X 10.6 and later.  OS X
-  10.4 compatibility SDK required.
+  On 64-bit OS X systems, this creates a version of the Macintosh package and
+  disk image which contains universal i386/x86-64 binaries.  You should first
+  configure a 32-bit out-of-tree build of libjpeg-turbo, then configure a
+  64-bit out-of-tree build, then run 'make udmg' from the 64-bit build
+  directory.  The build system will look for the 32-bit build under
+  {source_directory}/osxx86 by default, but you can override this by setting
+  the BUILDDIR32 variable on the make command line as shown above.
 
-make nsi
+make sunpkg
 
-  When using MinGW, this creates a Win32 installer for the GCC version of the
-  libjpeg-turbo SDK.  This requires the Nullsoft Install System
-  (http://nsis.sourceforge.net/.)  makensis.exe should be in your PATH.
+  Build a Solaris package.  This requires pkgmk, pkgtrans, and bzip2.
 
-make -f win/Makefile dist
+make csunpkg [BUILDDIR32={32-bit build directory}]
 
-  This creates a Win32 installer for the Visual C++ version of the
-  libjpeg-turbo SDK.  This requires the Nullsoft Install System
-  (http://nsis.sourceforge.net/.)  makensis.exe should be in your PATH.
+  On 64-bit Solaris systems, this creates a combined package which contains
+  both 32-bit and 64-bit libraries.  You should first configure a 32-bit
+  out-of-tree build of libjpeg-turbo, then configure a 64-bit out-of-tree
+  build, then run 'make csunpkg' from the 64-bit build directory.  The build
+  system will look for the 32-bit build under {source_directory}/solx86 by
+  default, but you can override this by setting the BUILDDIR32 variable on the
+  make command line as shown above.
+
+make cygwinpkg
+
+  Build a Cygwin binary package.
+
+
+Windows
+-------
+
+If using NMake:
+
+  cd {build_directory}
+  nmake installer
+
+If using MinGW:
+
+  cd {build_directory}
+  make installer
+
+If using the Visual Studio IDE, build the "installer" project.
+
+The installer package (libjpeg-turbo[-gcc][64].exe) will be located under
+{build_directory}.  If building using the Visual Studio IDE, then the installer
+package will be located in a subdirectory with the same name as the
+configuration you built (such as {build_directory}\Debug\ or
+{build_directory}\Release\).
+
+Building a Windows installer requires the Nullsoft Install System
+(http://nsis.sourceforge.net/.)  makensis.exe should be in your PATH.

CMakeLists.txt

@@ -0,0 +1,343 @@
+#
+# Setup
+#
+
+cmake_minimum_required(VERSION 2.6)
+
+project(libjpeg-turbo C)
+set(VERSION 1.1.1)
+
+if(MINGW OR CYGWIN)
+  execute_process(COMMAND "date" "+%Y%m%d" OUTPUT_VARIABLE BUILD)
+  string(REGEX REPLACE "\n" "" BUILD ${BUILD})
+elseif(WIN32)
+  execute_process(COMMAND "${CMAKE_SOURCE_DIR}/cmakescripts/getdate.bat"
+    OUTPUT_VARIABLE BUILD)
+  string(REGEX REPLACE "\n" "" BUILD ${BUILD})
+else()
+  message(FATAL_ERROR "Platform not supported by this build system.  Use autotools instead.")
+endif()
+
+if(NOT CMAKE_BUILD_TYPE)
+  set(CMAKE_BUILD_TYPE Release)
+endif()
+
+message(STATUS "CMAKE_BUILD_TYPE = ${CMAKE_BUILD_TYPE}")
+
+# This only works if building from the command line.  There is currently no way
+# to set a variable's value based on the build type when using the MSVC IDE.
+if(CMAKE_BUILD_TYPE STREQUAL "Debug")
+  set(BUILD "${BUILD}d")
+endif()
+
+message(STATUS "VERSION = ${VERSION}, BUILD = ${BUILD}")
+
+option(WITH_SIMD "Include SIMD extensions" TRUE)
+option(WITH_ARITH_ENC "Include arithmetic encoding support" TRUE)
+option(WITH_ARITH_DEC "Include arithmetic decoding support" TRUE)
+option(WITH_JPEG7 "Emulate libjpeg v7 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b)" FALSE)
+option(WITH_JPEG8 "Emulate libjpeg v8 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b)" FALSE)
+
+if(WITH_ARITH_ENC)
+  set(C_ARITH_CODING_SUPPORTED 1)
+  message(STATUS "Arithmetic encoding support enabled")
+else()
+  message(STATUS "Arithmetic encoding support disabled")
+endif()
+
+if(WITH_ARITH_DEC)
+  set(D_ARITH_CODING_SUPPORTED 1)
+  message(STATUS "Arithmetic decoding support enabled")
+else()
+  message(STATUS "Arithmetic decoding support disabled")
+endif()
+
+set(JPEG_LIB_VERSION 62)
+set(DLL_VERSION ${JPEG_LIB_VERSION})
+set(FULLVERSION ${DLL_VERSION}.0.0)
+if(WITH_JPEG8)
+  set(JPEG_LIB_VERSION 80)
+  set(DLL_VERSION 8)
+  set(FULLVERSION ${DLL_VERSION}.0.2)
+  message(STATUS "Emulating libjpeg v8 API/ABI")
+elseif(WITH_JPEG7)
+  set(JPEG_LIB_VERSION 70)
+  set(DLL_VERSION 7)
+  set(FULLVERSION ${DLL_VERSION}.0.0)
+  message(STATUS "Emulating libjpeg v7 API/ABI")
+endif(WITH_JPEG8)
+
+if(MSVC)
+  # Use the static C library for all build types
+  foreach(var CMAKE_C_FLAGS CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE
+    CMAKE_C_FLAGS_MINSIZEREL CMAKE_C_FLAGS_RELWITHDEBINFO)
+    if(${var} MATCHES "/MD")
+      string(REGEX REPLACE "/MD" "/MT" ${var} "${${var}}")
+    endif()
+  endforeach()
+
+  add_definitions(-W3 -wd4996)
+endif()
+
+# Detect whether compiler is 64-bit
+if(MSVC AND CMAKE_CL_64)
+  set(SIMD_X86_64 1)
+  set(64BIT 1)
+elseif(CMAKE_SIZEOF_VOID_P MATCHES 8)
+  set(SIMD_X86_64 1)
+  set(64BIT 1)
+endif()
+
+if(64BIT)
+  message(STATUS "64-bit build")
+else()
+  message(STATUS "32-bit build")
+endif()
+
+configure_file(win/jconfig.h.in jconfig.h)
+configure_file(win/config.h.in config.h)
+
+include_directories(${CMAKE_CURRENT_BINARY_DIR} ${CMAKE_SOURCE_DIR})
+
+
+#
+# Targets
+#
+
+set(JPEG_SOURCES jcapimin.c jcapistd.c jccoefct.c jccolor.c jcdctmgr.c jchuff.c
+  jcinit.c jcmainct.c jcmarker.c jcmaster.c jcomapi.c jcparam.c jcphuff.c
+  jcprepct.c jcsample.c jctrans.c jdapimin.c jdapistd.c jdatadst.c jdatasrc.c
+  jdcoefct.c jdcolor.c jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c
+  jdmaster.c jdmerge.c jdphuff.c jdpostct.c jdsample.c jdtrans.c jerror.c
+  jfdctflt.c jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jidctred.c
+  jquant1.c jquant2.c jutils.c jmemmgr.c jmemnobs.c)
+
+if(WITH_ARITH_ENC OR WITH_ARITH_DEC)
+  set(JPEG_SOURCES ${JPEG_SOURCES} jaricom.c)
+endif()
+
+if(WITH_ARITH_ENC)
+  set(JPEG_SOURCES ${JPEG_SOURCES} jcarith.c)
+endif()
+
+if(WITH_ARITH_DEC)
+  set(JPEG_SOURCES ${JPEG_SOURCES} jdarith.c)
+endif()
+
+if(WITH_SIMD)
+  add_definitions(-DWITH_SIMD)
+  add_subdirectory(simd)
+  if(SIMD_X86_64)
+    set(JPEG_SOURCES ${JPEG_SOURCES} simd/jsimd_x86_64.c)
+  else()
+    set(JPEG_SOURCES ${JPEG_SOURCES} simd/jsimd_i386.c)
+  endif()
+  # This tells CMake that the "source" files haven't been generated yet
+  set_source_files_properties(${SIMD_OBJS} PROPERTIES GENERATED 1)
+else()
+  set(JPEG_SOURCES ${JPEG_SOURCES} jsimd_none.c)
+  message(STATUS "Not using SIMD acceleration")
+endif()
+
+add_subdirectory(sharedlib)
+
+add_library(jpeg-static STATIC ${JPEG_SOURCES} ${SIMD_OBJS})
+if(NOT MSVC)
+  set_target_properties(jpeg-static PROPERTIES OUTPUT_NAME jpeg)
+endif()
+if(WITH_SIMD)
+  add_dependencies(jpeg-static simd)
+endif()
+
+add_library(turbojpeg SHARED turbojpegl.c)
+set_target_properties(turbojpeg PROPERTIES DEFINE_SYMBOL DLLDEFINE)
+target_link_libraries(turbojpeg jpeg-static)
+set_target_properties(turbojpeg PROPERTIES LINK_INTERFACE_LIBRARIES "")
+
+add_library(turbojpeg-static STATIC ${JPEG_SOURCES} ${SIMD_OBJS}
+  turbojpegl.c)
+if(NOT MSVC)
+  set_target_properties(turbojpeg-static PROPERTIES OUTPUT_NAME turbojpeg)
+endif()
+if(WITH_SIMD)
+  add_dependencies(turbojpeg-static simd)
+endif()
+
+add_executable(jpegut jpegut.c)
+target_link_libraries(jpegut turbojpeg)
+
+add_executable(jpegut-static jpegut.c)
+target_link_libraries(jpegut-static turbojpeg-static)
+
+add_executable(jpgtest jpgtest.c bmp.c)
+target_link_libraries(jpgtest turbojpeg)
+
+add_executable(jpgtest-static jpgtest.c bmp.c)
+target_link_libraries(jpgtest-static turbojpeg-static)
+
+add_executable(cjpeg-static cjpeg.c cdjpeg.c rdbmp.c rdgif.c rdppm.c rdswitch.c
+  rdtarga.c)
+set_property(TARGET cjpeg-static PROPERTY COMPILE_FLAGS
+  "-DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED -DTARGA_SUPPORTED -DUSE_SETMODE")
+target_link_libraries(cjpeg-static jpeg-static)
+
+add_executable(djpeg-static djpeg.c cdjpeg.c rdcolmap.c rdswitch.c wrbmp.c wrgif.c
+  wrppm.c wrtarga.c)
+set_property(TARGET djpeg-static PROPERTY COMPILE_FLAGS
+  "-DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED -DTARGA_SUPPORTED -DUSE_SETMODE")
+target_link_libraries(djpeg-static jpeg-static)
+
+add_executable(jpegtran-static jpegtran.c cdjpeg.c rdswitch.c transupp.c)
+target_link_libraries(jpegtran-static jpeg-static)
+
+add_executable(rdjpgcom rdjpgcom.c)
+
+add_executable(wrjpgcom rdjpgcom.c)
+
+
+#
+# Tests
+#
+
+enable_testing()
+add_test(jpegut jpegut)
+add_test(jpegut-yuv jpegut -yuv)
+add_test(cjpeg-int sharedlib/cjpeg -dct int -outfile testoutint.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-int-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.jpg testoutint.jpg)
+add_test(cjpeg-fast sharedlib/cjpeg -dct fast -opt -outfile testoutfst.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-fast-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgfst.jpg testoutfst.jpg)
+add_test(cjpeg-fast-100 sharedlib/cjpeg -dct fast -quality 100 -opt -outfile testoutfst100.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-fast-100-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgfst100.jpg testoutfst100.jpg)
+add_test(cjpeg-float sharedlib/cjpeg -dct float -outfile testoutflt.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+if(WITH_SIMD)
+add_test(cjpeg-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgflt.jpg testoutflt.jpg)
+else()
+add_test(cjpeg-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgflt-nosimd.jpg testoutflt.jpg)
+endif()
+add_test(djpeg-int sharedlib/djpeg -dct int -fast -ppm -outfile testoutint.ppm ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(djpeg-int-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.ppm testoutint.ppm)
+add_test(djpeg-fast sharedlib/djpeg -dct fast -ppm -outfile testoutfst.ppm ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(djpeg-fast-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgfst.ppm testoutfst.ppm)
+add_test(djpeg-float sharedlib/djpeg -dct float -ppm -outfile testoutflt.ppm ${CMAKE_SOURCE_DIR}/testorig.jpg)
+if(WITH_SIMD)
+add_test(djpeg-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgflt.ppm testoutflt.ppm)
+else()
+add_test(djpeg-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testorig.ppm testoutflt.ppm)
+endif()
+add_test(djpeg-256 sharedlib/djpeg -dct int -bmp -colors 256 -outfile testout.bmp  ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(djpeg-256-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimg.bmp testout.bmp)
+add_test(cjpeg-prog sharedlib/cjpeg -dct int -progressive -outfile testoutp.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-prog-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgp.jpg testoutp.jpg)
+add_test(jpegtran-prog sharedlib/jpegtran -outfile testoutt.jpg testoutp.jpg)
+add_test(jpegtran-prog-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.jpg testoutt.jpg)
+if(WITH_ARITH_ENC)
+add_test(cjpeg-ari sharedlib/cjpeg -dct int -arithmetic -outfile testoutari.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-ari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgari.jpg testoutari.jpg)
+add_test(jpegtran-toari sharedlib/jpegtran -arithmetic -outfile testouta.jpg ${CMAKE_SOURCE_DIR}/testimgint.jpg)
+add_test(jpegtran-toari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgari.jpg testouta.jpg)
+endif()
+if(WITH_ARITH_DEC)
+add_test(djpeg-ari sharedlib/djpeg -dct int -fast -ppm -outfile testoutari.ppm ${CMAKE_SOURCE_DIR}/testimgari.jpg)
+add_test(djpeg-ari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgari.ppm testoutari.ppm)
+add_test(jpegtran-fromari	sharedlib/jpegtran -outfile testouta.jpg ${CMAKE_SOURCE_DIR}/testimgari.jpg)
+add_test(jpegtran-fromari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.jpg testouta.jpg)
+endif()
+add_test(jpegtran-crop sharedlib/jpegtran -crop 120x90+20+50 -transpose -perfect -outfile testoutcrop.jpg ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(jpegtran-crop-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgcrop.jpg testoutcrop.jpg)
+
+add_test(jpegut-static jpegut-static)
+add_test(jpegut-static-yuv jpegut-static -yuv)
+add_test(cjpeg-static-int cjpeg-static -dct int -outfile testoutint.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-static-int-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.jpg testoutint.jpg)
+add_test(cjpeg-static-fast cjpeg-static -dct fast -opt -outfile testoutfst.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-static-fast-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgfst.jpg testoutfst.jpg)
+add_test(cjpeg-static-fast-100 cjpeg-static -dct fast -quality 100 -opt -outfile testoutfst100.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-static-fast-100-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgfst100.jpg testoutfst100.jpg)
+add_test(cjpeg-static-float cjpeg-static -dct float -outfile testoutflt.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+if(WITH_SIMD)
+add_test(cjpeg-static-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgflt.jpg testoutflt.jpg)
+else()
+add_test(cjpeg-static-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgflt-nosimd.jpg testoutflt.jpg)
+endif()
+add_test(djpeg-static-int djpeg-static -dct int -fast -ppm -outfile testoutint.ppm ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(djpeg-static-int-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.ppm testoutint.ppm)
+add_test(djpeg-static-fast djpeg-static -dct fast -ppm -outfile testoutfst.ppm ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(djpeg-static-fast-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgfst.ppm testoutfst.ppm)
+add_test(djpeg-static-float djpeg-static -dct float -ppm -outfile testoutflt.ppm ${CMAKE_SOURCE_DIR}/testorig.jpg)
+if(WITH_SIMD)
+add_test(djpeg-static-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgflt.ppm testoutflt.ppm)
+else()
+add_test(djpeg-static-float-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testorig.ppm testoutflt.ppm)
+endif()
+add_test(djpeg-static-256 djpeg-static -dct int -bmp -colors 256 -outfile testout.bmp  ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(djpeg-static-256-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimg.bmp testout.bmp)
+add_test(cjpeg-static-prog cjpeg-static -dct int -progressive -outfile testoutp.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-static-prog-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgp.jpg testoutp.jpg)
+add_test(jpegtran-static-prog jpegtran-static -outfile testoutt.jpg testoutp.jpg)
+add_test(jpegtran-static-prog-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.jpg testoutt.jpg)
+if(WITH_ARITH_ENC)
+add_test(cjpeg-static-ari cjpeg-static -dct int -arithmetic -outfile testoutari.jpg ${CMAKE_SOURCE_DIR}/testorig.ppm)
+add_test(cjpeg-static-ari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgari.jpg testoutari.jpg)
+add_test(jpegtran-static-toari jpegtran-static -arithmetic -outfile testouta.jpg ${CMAKE_SOURCE_DIR}/testimgint.jpg)
+add_test(jpegtran-static-toari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgari.jpg testouta.jpg)
+endif()
+if(WITH_ARITH_DEC)
+add_test(djpeg-static-ari djpeg-static -dct int -fast -ppm -outfile testoutari.ppm ${CMAKE_SOURCE_DIR}/testimgari.jpg)
+add_test(djpeg-static-ari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgari.ppm testoutari.ppm)
+add_test(jpegtran-static-fromari	jpegtran-static -outfile testouta.jpg ${CMAKE_SOURCE_DIR}/testimgari.jpg)
+add_test(jpegtran-static-fromari-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgint.jpg testouta.jpg)
+endif()
+add_test(jpegtran-static-crop jpegtran-static -crop 120x90+20+50 -transpose -perfect -outfile testoutcrop.jpg ${CMAKE_SOURCE_DIR}/testorig.jpg)
+add_test(jpegtran-static-crop-cmp ${CMAKE_COMMAND} -E compare_files ${CMAKE_SOURCE_DIR}/testimgcrop.jpg testoutcrop.jpg)
+
+
+#
+# Installer
+#
+
+if(MSVC)
+  set(INST_PLATFORM "Visual C++")
+  set(INST_NAME ${CMAKE_PROJECT_NAME}-${VERSION}-vc)
+  set(INST_DIR ${CMAKE_PROJECT_NAME})
+elseif(MINGW)
+  set(INST_PLATFORM GCC)
+  set(INST_NAME ${CMAKE_PROJECT_NAME}-${VERSION}-gcc)
+  set(INST_DIR ${CMAKE_PROJECT_NAME}-gcc)
+  set(INST_DEFS -DGCC)
+endif()
+
+if(64BIT)
+  set(INST_PLATFORM "${INST_PLATFORM} 64-bit")
+  set(INST_NAME ${INST_NAME}64)
+  set(INST_DIR ${INST_DIR}64)
+  set(INST_DEFS ${INST_DEFS} -DWIN64)
+endif()
+
+if(MSVC_IDE)
+  set(INST_DEFS ${INST_DEFS} "-DBUILDDIR=${CMAKE_CFG_INTDIR}\\")
+else()
+  set(INST_DEFS ${INST_DEFS} "-DBUILDDIR=")
+endif()
+
+configure_file(release/libjpeg-turbo.nsi.in libjpeg-turbo.nsi @ONLY)
+
+add_custom_target(installer
+  makensis -nocd ${INST_DEFS} libjpeg-turbo.nsi
+  DEPENDS jpeg jpeg-static turbojpeg turbojpeg-static rdjpgcom wrjpgcom
+    cjpeg djpeg jpegtran jpgtest
+  SOURCES libjpeg-turbo.nsi)
+
+install(TARGETS jpeg-static turbojpeg turbojpeg-static rdjpgcom wrjpgcom jpgtest
+  ARCHIVE DESTINATION lib
+  LIBRARY DESTINATION lib
+  RUNTIME DESTINATION bin
+)
+
+install(FILES ${CMAKE_SOURCE_DIR}/LGPL.txt ${CMAKE_SOURCE_DIR}/LICENSE.txt
+  ${CMAKE_SOURCE_DIR}/README ${CMAKE_SOURCE_DIR}/README-turbo.txt
+  ${CMAKE_SOURCE_DIR}/libjpeg.txt ${CMAKE_SOURCE_DIR}/usage.txt
+  DESTINATION doc)
+
+install(FILES ${CMAKE_BINARY_DIR}/jconfig.h ${CMAKE_SOURCE_DIR}/jerror.h
+  ${CMAKE_SOURCE_DIR}/jmorecfg.h ${CMAKE_SOURCE_DIR}/jpeglib.h
+  ${CMAKE_SOURCE_DIR}/turbojpeg.h DESTINATION include)

ChangeLog.txt

@@ -0,0 +1,162 @@
+1.1.1
+=====
+
+[1] Fixed a 1-pixel error in row 0, column 21 of the luminance plane generated
+by tjEncodeYUV().
+
+[2] libjpeg-turbo's accelerated Huffman decoder previously ignored unexpected
+markers found in the middle of the JPEG data stream during decompression.  It
+will now hand off decoding of a particular block to the unaccelerated Huffman
+decoder if an unexpected marker is found, so that the unaccelerated Huffman
+decoder can generate an appropriate warning.
+
+[3] Older versions of MinGW64 prefixed symbol names with underscores by
+default, which differed from the behavior of 64-bit Visual C++.  MinGW64 1.0
+has adopted the behavior of 64-bit Visual C++ as the default, so to accommodate
+this, the libjpeg-turbo SIMD function names are no longer prefixed with an
+underscore when building with MinGW64.  This means that, when building
+libjpeg-turbo with older versions of MinGW64, you will now have to add
+-fno-leading-underscore to the CFLAGS.
+
+[4] Fixed a regression bug in the NSIS script that caused the Windows installer
+build to fail when using the Visual Studio IDE.
+
+[5] Fixed a bug in jpeg_read_coefficients() whereby it would not initialize
+cinfo->image_width and cinfo->image_height if libjpeg v7 or v8 emulation was
+enabled.  This specifically caused the jpegoptim program to fail if it was
+linked against a version of libjpeg-turbo that was built with libjpeg v7 or v8
+emulation.
+
+[6] Eliminated excessive I/O overhead that occurred when reading BMP files in
+cjpeg.
+
+[7] Eliminated errors in the output of cjpeg on Windows that occurred when the
+application was invoked using I/O redirection (cjpeg <inputfile >output.jpg).
+
+
+1.1.0
+=====
+
+[1] The algorithm used by the SIMD quantization function cannot produce correct
+results when the JPEG quality is >= 98 and the fast integer forward DCT is
+used.  Thus, the non-SIMD quantization function is now used for those cases,
+and libjpeg-turbo should now produce identical output to libjpeg v6b in all
+cases.
+
+[2] Despite the above, the fast integer forward DCT still degrades somewhat for
+JPEG qualities greater than 95, so TurboJPEG/OSS will now automatically use the
+slow integer forward DCT when generating JPEG images of quality 96 or greater.
+This reduces compression performance by as much as 15% for these high-quality
+images but is necessary to ensure that the images are perceptually lossless.
+It also ensures that the library can avoid the performance pitfall created by
+[1].
+
+[3] Ported jpgtest.cxx to pure C to avoid the need for a C++ compiler.
+
+[4] Fixed visual artifacts in grayscale JPEG compression caused by a typo in
+the RGB-to-luminance lookup tables.
+
+[5] The Windows distribution packages now include the libjpeg run-time programs
+(cjpeg, etc.)
+
+[6] All packages now include jpgtest.
+
+[7] The TurboJPEG dynamic library now uses versioned symbols.
+
+[8] Added two new TurboJPEG API functions, tjEncodeYUV() and
+tjDecompressToYUV(), to replace the somewhat hackish TJ_YUV flag.
+
+
+1.0.90 (1.1 beta1)
+==================
+
+[1] Added emulation of the libjpeg v7 and v8 APIs and ABIs.  See
+README-turbo.txt for more details.  This feature was sponsored by CamTrace SAS.
+
+[2] Created a new CMake-based build system for the Visual C++ and MinGW builds.
+
+[3] TurboJPEG/OSS can now compress from/decompress to grayscale bitmaps.
+
+[4] jpgtest can now be used to test decompression performance with existing
+JPEG images.
+
+[5] If the default install prefix (/opt/libjpeg-turbo) is used, then
+'make install' now creates /opt/libjpeg-turbo/lib32 and
+/opt/libjpeg-turbo/lib64 sym links to duplicate the behavior of the binary
+packages.
+
+[6] All symbols in the libjpeg-turbo dynamic library are now versioned, even
+when the library is built with libjpeg v6b emulation.
+
+[7] Added arithmetic encoding and decoding support (can be disabled with
+configure or CMake options)
+
+[8] Added a TJ_YUV flag to TurboJPEG/OSS which causes both the compressor and
+decompressor to output planar YUV images.
+
+[9] Added an extended version of tjDecompressHeader() to TurboJPEG/OSS which
+allows the caller to determine the type of subsampling used in a JPEG image.
+
+[10] Added further protections against invalid Huffman codes.
+
+
+1.0.1
+=====
+
+[1] The Huffman decoder will now handle erroneous Huffman codes (for instance,
+from a corrupt JPEG image.)  Previously, these would cause libjpeg-turbo to
+crash under certain circumstances.
+
+[2] Fixed typo in SIMD dispatch routines which was causing 4:2:2 upsampling to
+be used instead of 4:2:0 when decompressing JPEG images using SSE2 code.
+
+[3] configure script will now automatically determine whether the
+INCOMPLETE_TYPES_BROKEN macro should be defined.
+
+
+1.0.0
+=====
+
+[1] 2983700: Further FreeBSD build tweaks (no longer necessary to specify
+--host when configuring on a 64-bit system)
+
+[2] Created sym. links in the Unix/Linux packages so that the TurboJPEG
+include file can always be found in /opt/libjpeg-turbo/include, the 32-bit
+static libraries can always be found in /opt/libjpeg-turbo/lib32, and the
+64-bit static libraries can always be found in /opt/libjpeg-turbo/lib64.
+
+[3] The Unix/Linux distribution packages now include the libjpeg run-time
+programs (cjpeg, etc.) and man pages.
+
+[4] Created a 32-bit supplementary package for amd64 Debian systems which
+contains just the 32-bit libjpeg-turbo libraries.
+
+[5] Moved the libraries from */lib32 to */lib in the i386 Debian package.
+
+[6] Include distribution package for Cygwin
+
+[7] No longer necessary to specify --without-simd on non-x86 architectures, and
+unit tests now work on those architectures.
+
+
+0.0.93
+======
+
+[1] 2982659, Fixed x86-64 build on FreeBSD systems
+
+[2] 2988188: Added support for Windows 64-bit systems
+
+
+0.0.91
+======
+
+[1] Added documentation to .deb packages
+
+[2] 2968313: Fixed data corruption issues when decompressing large JPEG images
+and/or using buffered I/O with the libjpeg-turbo decompressor
+
+
+0.0.90
+======
+
+Initial release

Makefile.am

@@ -1,11 +1,11 @@
 lib_LTLIBRARIES = libjpeg.la libturbojpeg.la
-libjpeg_la_LDFLAGS = -version-number 62:0:0 -no-undefined
+libjpeg_la_LDFLAGS = -version-info ${SO_MAJOR_VERSION}:${SO_MINOR_VERSION} -no-undefined
 libturbojpeg_la_LDFLAGS = -avoid-version -no-undefined
 include_HEADERS = jerror.h jmorecfg.h jpeglib.h turbojpeg.h
 nodist_include_HEADERS = jconfig.h
 
 HDRS = jchuff.h jdct.h jdhuff.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-	jpegint.h jpeglib.h jversion.h jsimd.h jsimddct.h
+	jpegint.h jpeglib.h jversion.h jsimd.h jsimddct.h jpegcomp.h
 
 libjpeg_la_SOURCES = $(HDRS) jcapimin.c jcapistd.c jccoefct.c jccolor.c \
 	jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
@@ -16,12 +16,31 @@ libjpeg_la_SOURCES = $(HDRS) jcapimin.c jcapistd.c jccoefct.c jccolor.c \
 	jfdctflt.c jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c \
 	jidctred.c jquant1.c jquant2.c jutils.c jmemmgr.c jmemnobs.c
 
+if WITH_ARITH
+
+libjpeg_la_SOURCES += jaricom.c
+
+endif
+
+if WITH_ARITH_ENC
+
+libjpeg_la_SOURCES += jcarith.c
+
+endif
+
+if WITH_ARITH_DEC
+
+libjpeg_la_SOURCES += jdarith.c
+
+endif
+
 libturbojpeg_la_SOURCES = $(libjpeg_la_SOURCES) turbojpegl.c turbojpeg.h \
 	turbojpeg-mapfile
 
 if VERSION_SCRIPT
 
 libturbojpeg_la_LDFLAGS += $(VERSION_SCRIPT_FLAG)$(srcdir)/turbojpeg-mapfile
+libjpeg_la_LDFLAGS += $(VERSION_SCRIPT_FLAG)libjpeg.map
 
 endif
 
@@ -39,11 +58,12 @@ endif
 
 TSTHDRS = rrutil.h rrtimer.h
 
-noinst_PROGRAMS = jpgtest jpegut cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom jpgtest
+noinst_PROGRAMS = jpegut
 
-jpgtest_SOURCES = $(TSTHDRS) jpgtest.cxx bmp.h bmp.c
+jpgtest_SOURCES = $(TSTHDRS) jpgtest.c bmp.h bmp.c
 
-jpgtest_LDADD = libturbojpeg.la
+jpgtest_LDADD = libturbojpeg.la -lm
 
 jpegut_SOURCES = $(TSTHDRS) jpegut.c bmp.h bmp.c
 
@@ -78,94 +98,166 @@ wrjpgcom_SOURCES = wrjpgcom.c
 wrjpgcom_LDADD = libjpeg.la
 
 
-DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
+dist_man1_MANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
 
-DOCS= README install.doc usage.doc wizard.doc example.c libjpeg.doc \
-	structure.doc coderules.doc filelist.doc jconfig.doc change.log \
-	README-turbo.txt rdrle.c wrrle.c LICENSE.txt LGPL.txt BUILDING.txt
+DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \
+	structure.txt coderules.txt filelist.txt jconfig.txt change.log \
+	README-turbo.txt rdrle.c wrrle.c LICENSE.txt LGPL.txt BUILDING.txt \
+	ChangeLog.txt
 
 TESTFILES= testorig.jpg testorig.ppm testimg.bmp testimgflt.jpg \
-	testimgfst.jpg testimgint.jpg testimgp.jpg testimgfst.ppm testimgint.ppm
+	testimgfst.jpg testimgint.jpg testimgp.jpg testimgflt.ppm testimgfst.ppm \
+	testimgint.ppm testimgflt-nosimd.jpg testimgcrop.jpg testimgari.jpg \
+	testimgari.ppm testimgfst100.jpg
 
-EXTRA_DIST = win release $(DOCS) $(DISTMANS) $(TESTFILES)
+EXTRA_DIST = win release $(DOCS) $(TESTFILES) CMakeLists.txt \
+	sharedlib/CMakeLists.txt cmakescripts libjpeg.map.in
 
 dist-hook:
 	rm -rf `find $(distdir) -name .svn`
 
 
-test: testclean cjpeg djpeg jpegtran jpegut
+test: testclean all
 	./jpegut
+	./jpegut -yuv
 	./cjpeg -dct int -outfile testoutint.jpg $(srcdir)/testorig.ppm
-	./cjpeg -dct fast -opt -outfile testoutfst.jpg $(srcdir)/testorig.ppm
-	./cjpeg -dct float -outfile testoutflt.jpg $(srcdir)/testorig.ppm
 	cmp $(srcdir)/testimgint.jpg testoutint.jpg
+	./cjpeg -dct fast -opt -outfile testoutfst.jpg $(srcdir)/testorig.ppm
 	cmp $(srcdir)/testimgfst.jpg testoutfst.jpg
+	./cjpeg -dct fast -quality 100 -opt -outfile testoutfst100.jpg $(srcdir)/testorig.ppm
+	cmp $(srcdir)/testimgfst100.jpg testoutfst100.jpg
+	./cjpeg -dct float -outfile testoutflt.jpg $(srcdir)/testorig.ppm
+if WITH_SIMD
 	cmp $(srcdir)/testimgflt.jpg testoutflt.jpg
+else
+	cmp $(srcdir)/testimgflt-nosimd.jpg testoutflt.jpg
+endif
 	./djpeg -dct int -fast -ppm -outfile testoutint.ppm $(srcdir)/testorig.jpg
-	./djpeg -dct fast -ppm -outfile testoutfst.ppm $(srcdir)/testorig.jpg
-	./djpeg -dct float -ppm -outfile testoutflt.ppm $(srcdir)/testorig.jpg
 	cmp $(srcdir)/testimgint.ppm testoutint.ppm
+	./djpeg -dct fast -ppm -outfile testoutfst.ppm $(srcdir)/testorig.jpg
 	cmp $(srcdir)/testimgfst.ppm testoutfst.ppm
+	./djpeg -dct float -ppm -outfile testoutflt.ppm $(srcdir)/testorig.jpg
+if WITH_SIMD
+	cmp $(srcdir)/testimgflt.ppm testoutflt.ppm
+else
 	cmp $(srcdir)/testorig.ppm testoutflt.ppm
+endif
 	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
 	cmp $(srcdir)/testimg.bmp testout.bmp
+if WITH_ARITH_ENC
+	./cjpeg -dct int -arithmetic -outfile testoutari.jpg $(srcdir)/testorig.ppm
+	cmp $(srcdir)/testimgari.jpg testoutari.jpg
+	./jpegtran -arithmetic -outfile testouta.jpg $(srcdir)/testimgint.jpg
+	cmp $(srcdir)/testimgari.jpg testouta.jpg
+endif
+if WITH_ARITH_DEC
+	./djpeg -dct int -fast -ppm -outfile testoutari.ppm $(srcdir)/testimgari.jpg
+	cmp $(srcdir)/testimgari.ppm testoutari.ppm
+	./jpegtran -outfile testouta.jpg $(srcdir)/testimgari.jpg
+	cmp $(srcdir)/testimgint.jpg testouta.jpg
+endif
 	./cjpeg -dct int -progressive -outfile testoutp.jpg $(srcdir)/testorig.ppm
 	cmp $(srcdir)/testimgp.jpg testoutp.jpg
 	./jpegtran -outfile testoutt.jpg testoutp.jpg
 	cmp $(srcdir)/testimgint.jpg testoutt.jpg
+	./jpegtran -crop 120x90+20+50 -transpose -perfect -outfile testoutcrop.jpg $(srcdir)/testorig.jpg
+	cmp $(srcdir)/testimgcrop.jpg testoutcrop.jpg
+
 
 testclean:
-	$(RM) testout*
-	$(RM) *_GRAYQ[0-9]*.bmp
-	$(RM) *_GRAYQ[0-9]*.ppm
-	$(RM) *_GRAYQ[0-9]*.jpg
-	$(RM) *_420Q[0-9]*.bmp
-	$(RM) *_420Q[0-9]*.ppm
-	$(RM) *_420Q[0-9]*.jpg
-	$(RM) *_422Q[0-9]*.bmp
-	$(RM) *_422Q[0-9]*.ppm
-	$(RM) *_422Q[0-9]*.jpg
-	$(RM) *_444Q[0-9]*.bmp
-	$(RM) *_444Q[0-9]*.ppm
-	$(RM) *_444Q[0-9]*.jpg
+	rm -f testout*
+	rm -f *_GRAYQ[0-9]*.bmp
+	rm -f *_GRAYQ[0-9]*.ppm
+	rm -f *_GRAYQ[0-9]*.jpg
+	rm -f *_GRAY.yuv
+	rm -f *_420Q[0-9]*.bmp
+	rm -f *_420Q[0-9]*.ppm
+	rm -f *_420Q[0-9]*.jpg
+	rm -f *_420.yuv
+	rm -f *_422Q[0-9]*.bmp
+	rm -f *_422Q[0-9]*.ppm
+	rm -f *_422Q[0-9]*.jpg
+	rm -f *_422.yuv
+	rm -f *_444Q[0-9]*.bmp
+	rm -f *_444Q[0-9]*.ppm
+	rm -f *_444Q[0-9]*.jpg
+	rm -f *_444.yuv
+
+if X86_64
+
+install-exec-hook:
+	__PREFIX=`echo ${prefix} | sed -e 's@\/*$$@@'`;  \
+	if [ "$$__PREFIX" = "/opt/libjpeg-turbo" ]; then  \
+		cd $(DESTDIR)/${prefix};  \
+		if [ -d lib -a ! -d lib64 -a ! -h lib64 ]; then  \
+			$(LN_S) lib lib64;  \
+		fi  \
+	fi
+
+else
+
+install-exec-hook:
+	__PREFIX=`echo ${prefix} | sed -e 's@\/*$$@@'`;  \
+	if [ "$$__PREFIX" = "/opt/libjpeg-turbo" ]; then  \
+		cd $(DESTDIR)/${prefix};  \
+		if [ -d lib -a ! -d lib32 -a ! -h lib32 ]; then  \
+			$(LN_S) lib lib32;  \
+		fi  \
+	fi
+
+endif
 
 rpm: all
-	sh $(srcdir)/release/makerpm ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${RPMARCH} ${srcdir}
+	TMPDIR=`mktemp -d /tmp/${PACKAGE_NAME}-build.XXXXXX`; \
+	mkdir -p $$TMPDIR/RPMS; \
+	ln -fs `pwd` $$TMPDIR/BUILD; \
+	rm -f ${PACKAGE_NAME}-${VERSION}.${RPMARCH}.rpm; \
+	rpmbuild -bb --define "_blddir $$TMPDIR/buildroot"  \
+		--define "_topdir $$TMPDIR" --define "_srcdir ${srcdir}" \
+		--target ${RPMARCH} pkgscripts/libjpeg-turbo.spec; \
+	cp $$TMPDIR/RPMS/${RPMARCH}/${PACKAGE_NAME}-${VERSION}-${BUILD}.${RPMARCH}.rpm \
+		${PACKAGE_NAME}-${VERSION}.${RPMARCH}.rpm; \
+	rm -rf $$TMPDIR
 
 srpm: dist-gzip
-	sh $(srcdir)/release/makesrpm ${PACKAGE_NAME} ${VERSION} ${BUILD} ${srcdir}
+	TMPDIR=`mktemp -d /tmp/${PACKAGE_NAME}-build.XXXXXX`; \
+	mkdir -p $$TMPDIR/RPMS; \
+	mkdir -p $$TMPDIR/SRPMS; \
+	mkdir -p $$TMPDIR/BUILD; \
+	mkdir -p $$TMPDIR/SOURCES; \
+	mkdir -p $$TMPDIR/SPECS; \
+	rm -f ${PACKAGE_NAME}-${VERSION}.src.rpm; \
+	cp ${PACKAGE_NAME}-${VERSION}.tar.gz $$TMPDIR/SOURCES; \
+	cat pkgscripts/libjpeg-turbo.spec | sed s/%{_blddir}/%{_tmppath}/g \
+		| sed s@%{_srcdir}/@@g | sed s/#--\>//g \
+		> $$TMPDIR/SPECS/libjpeg-turbo.spec; \
+	rpmbuild -bs --define "_topdir $$TMPDIR" $$TMPDIR/SPECS/libjpeg-turbo.spec; \
+	cp $$TMPDIR/SRPMS/${PACKAGE_NAME}-${VERSION}-${BUILD}.src.rpm \
+		${PACKAGE_NAME}-${VERSION}.src.rpm; \
+	rm -rf $$TMPDIR
 
 deb: all
-	sh $(srcdir)/release/makedpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${DEBARCH} ${srcdir}
+	sh pkgscripts/makedpkg
 
 if X86_64
 
 udmg: all
-	sh $(srcdir)/release/makemacpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${srcdir} universal
+	sh pkgscripts/makemacpkg universal ${BUILDDIR32}
 
 endif
 
 dmg: all
-	sh $(srcdir)/release/makemacpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} ${srcdir}
+	sh pkgscripts/makemacpkg
 
 if X86_64
 
-sunpkg: all
-	sh $(srcdir)/release/makesunpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${DEBARCH} ${srcdir} $(CC) $(CXX) combined
-
-else
-
-sunpkg: all
-	sh $(srcdir)/release/makesunpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${DEBARCH} ${srcdir} $(CC) $(CXX)
+csunpkg: all
+	sh pkgscripts/makesunpkg combined ${BUILDDIR32}
 
 endif
 
-nsi: all
-	makensis -nocd -DVERSION=$(VERSION) -DAPPNAME=libjpeg-turbo-gcc \
-		-DWLIBDIR=.libs -DWSRCDIR=$(srcdir) -DWBLDDIR=. -DWHDRDIR=. \
-		-DPLATFORM="GCC" -DGCC $(srcdir)/release/libjpeg-turbo.nsi
+sunpkg: all
+	sh pkgscripts/makesunpkg
+
+cygwinpkg: all
+	sh pkgscripts/makecygwinpkg

README

@@ -1,29 +1,20 @@
-libjpeg-turbo note:  This is the legacy document from the original libjpeg v6b
-release, which is included for reference.  The Internet addresses given below
-are likely non-functional.  For more information about the libjpeg project,
-please see http://www.ijg.org.  For more information about libjpeg-turbo,
-please see http://libjpeg-turbo.virtualgl.org.
+libjpeg-turbo note:  This file is mostly taken from the libjpeg v8b README
+file, and it is included only for reference.  Some parts of it may not apply to
+libjpeg-turbo.  Please see README-turbo.txt for information specific to the
+turbo version.
 
 
 The Independent JPEG Group's JPEG software
 ==========================================
 
-README for release 6b of 27-Mar-1998
-====================================
+This distribution contains a release of the Independent JPEG Group's free JPEG
+software.  You are welcome to redistribute this software and to use it for any
+purpose, subject to the conditions under LEGAL ISSUES, below.
 
-This distribution contains the sixth public release of the Independent JPEG
-Group's free JPEG software.  You are welcome to redistribute this software and
-to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
-
-Serious users of this software (particularly those incorporating it into
-larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to
-our electronic mailing list.  Mailing list members are notified of updates
-and have a chance to participate in technical discussions, etc.
-
-This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
-Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi,
-Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG
-Group.
+This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone,
+Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson,
+Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers,
+and other members of the Independent JPEG Group.
 
 IJG is not affiliated with the official ISO JPEG standards committee.
 
@@ -37,27 +28,26 @@ OVERVIEW            General description of JPEG and the IJG software.
 LEGAL ISSUES        Copyright, lack of warranty, terms of distribution.
 REFERENCES          Where to learn more about JPEG.
 ARCHIVE LOCATIONS   Where to find newer versions of this software.
-RELATED SOFTWARE    Other stuff you should get.
 FILE FORMAT WARS    Software *not* to get.
 TO DO               Plans for future IJG releases.
 
 Other documentation files in the distribution are:
 
 User documentation:
-  install.doc       How to configure and install the IJG software.
-  usage.doc         Usage instructions for cjpeg, djpeg, jpegtran,
+  install.txt       How to configure and install the IJG software.
+  usage.txt         Usage instructions for cjpeg, djpeg, jpegtran,
                     rdjpgcom, and wrjpgcom.
-  *.1               Unix-style man pages for programs (same info as usage.doc).
-  wizard.doc        Advanced usage instructions for JPEG wizards only.
+  *.1               Unix-style man pages for programs (same info as usage.txt).
+  wizard.txt        Advanced usage instructions for JPEG wizards only.
   change.log        Version-to-version change highlights.
 Programmer and internal documentation:
-  libjpeg.doc       How to use the JPEG library in your own programs.
+  libjpeg.txt       How to use the JPEG library in your own programs.
   example.c         Sample code for calling the JPEG library.
-  structure.doc     Overview of the JPEG library's internal structure.
-  filelist.doc      Road map of IJG files.
-  coderules.doc     Coding style rules --- please read if you contribute code.
+  structure.txt     Overview of the JPEG library's internal structure.
+  filelist.txt      Road map of IJG files.
+  coderules.txt     Coding style rules --- please read if you contribute code.
 
-Please read at least the files install.doc and usage.doc.  Useful information
+Please read at least the files install.txt and usage.txt.  Some information
 can also be found in the JPEG FAQ (Frequently Asked Questions) article.  See
 ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
 
@@ -69,24 +59,27 @@ the order listed) before diving into the code.
 OVERVIEW
 ========
 
-This package contains C software to implement JPEG image compression and
-decompression.  JPEG (pronounced "jay-peg") is a standardized compression
-method for full-color and gray-scale images.  JPEG is intended for compressing
-"real-world" scenes; line drawings, cartoons and other non-realistic images
-are not its strong suit.  JPEG is lossy, meaning that the output image is not
-exactly identical to the input image.  Hence you must not use JPEG if you
-have to have identical output bits.  However, on typical photographic images,
-very good compression levels can be obtained with no visible change, and
-remarkably high compression levels are possible if you can tolerate a
-low-quality image.  For more details, see the references, or just experiment
-with various compression settings.
+This package contains C software to implement JPEG image encoding, decoding,
+and transcoding.  JPEG (pronounced "jay-peg") is a standardized compression
+method for full-color and gray-scale images.  JPEG's strong suit is compressing
+photographic images or other types of images which have smooth color and
+brightness transitions between neighboring pixels.  Images with sharp lines or
+other abrupt features may not compress well with JPEG, and a higher JPEG
+quality may have to be used to avoid visible compression artifacts with such
+images.
+
+JPEG is lossy, meaning that the output pixels are not necessarily identical to
+the input pixels.  However, on photographic content and other "smooth" images,
+very good compression ratios can be obtained with no visible compression
+artifacts, and extremely high compression ratios are possible if you are
+willing to sacrifice image quality (by reducing the "quality" setting in the
+compressor.)
 
 This software implements JPEG baseline, extended-sequential, and progressive
 compression processes.  Provision is made for supporting all variants of these
 processes, although some uncommon parameter settings aren't implemented yet.
-For legal reasons, we are not distributing code for the arithmetic-coding
-variants of JPEG; see LEGAL ISSUES.  We have made no provision for supporting
-the hierarchical or lossless processes defined in the standard.
+We have made no provision for supporting the hierarchical or lossless
+processes defined in the standard.
 
 We provide a set of library routines for reading and writing JPEG image files,
 plus two sample applications "cjpeg" and "djpeg", which use the library to
@@ -98,10 +91,11 @@ considerable functionality beyond the bare JPEG coding/decoding capability;
 for example, the color quantization modules are not strictly part of JPEG
 decoding, but they are essential for output to colormapped file formats or
 colormapped displays.  These extra functions can be compiled out of the
-library if not required for a particular application.  We have also included
-"jpegtran", a utility for lossless transcoding between different JPEG
-processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
-inserting and extracting textual comments in JFIF files.
+library if not required for a particular application.
+
+We have also included "jpegtran", a utility for lossless transcoding between
+different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple
+applications for inserting and extracting textual comments in JFIF files.
 
 The emphasis in designing this software has been on achieving portability and
 flexibility, while also making it fast enough to be useful.  In particular,
@@ -134,7 +128,7 @@ with respect to this software, its quality, accuracy, merchantability, or
 fitness for a particular purpose.  This software is provided "AS IS", and you,
 its user, assume the entire risk as to its quality and accuracy.
 
-This software is copyright (C) 1991-1998, Thomas G. Lane.
+This software is copyright (C) 1991-2010, Thomas G. Lane, Guido Vollbeding.
 All Rights Reserved except as specified below.
 
 Permission is hereby granted to use, copy, modify, and distribute this
@@ -177,17 +171,8 @@ the foregoing paragraphs do.
 The Unix configuration script "configure" was produced with GNU Autoconf.
 It is copyright by the Free Software Foundation but is freely distributable.
 The same holds for its supporting scripts (config.guess, config.sub,
-ltconfig, ltmain.sh).  Another support script, install-sh, is copyright
-by M.I.T. but is also freely distributable.
-
-It appears that the arithmetic coding option of the JPEG spec is covered by
-patents owned by IBM, AT&T, and Mitsubishi.  Hence arithmetic coding cannot
-legally be used without obtaining one or more licenses.  For this reason,
-support for arithmetic coding has been removed from the free JPEG software.
-(Since arithmetic coding provides only a marginal gain over the unpatented
-Huffman mode, it is unlikely that very many implementations will support it.)
-So far as we are aware, there are no patent restrictions on the remaining
-code.
+ltmain.sh).  Another support script, install-sh, is copyright by X Consortium
+but is also freely distributable.
 
 The IJG distribution formerly included code to read and write GIF files.
 To avoid entanglement with the Unisys LZW patent, GIF reading support has
@@ -205,7 +190,7 @@ We are required to state that
 REFERENCES
 ==========
 
-We highly recommend reading one or more of these references before trying to
+We recommend reading one or more of these references before trying to
 understand the innards of the JPEG software.
 
 The best short technical introduction to the JPEG compression algorithm is
@@ -214,7 +199,7 @@ The best short technical introduction to the JPEG compression algorithm is
 (Adjacent articles in that issue discuss MPEG motion picture compression,
 applications of JPEG, and related topics.)  If you don't have the CACM issue
 handy, a PostScript file containing a revised version of Wallace's article is
-available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz.  The file (actually
+available at http://www.ijg.org/files/wallace.ps.gz.  The file (actually
 a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
 omits the sample images that appeared in CACM, but it includes corrections
 and some added material.  Note: the Wallace article is copyright ACM and IEEE,
@@ -229,82 +214,53 @@ code but don't know much about data compression in general.  The book's JPEG
 sample code is far from industrial-strength, but when you are ready to look
 at a full implementation, you've got one here...
 
-The best full description of JPEG is the textbook "JPEG Still Image Data
-Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
-by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.  Price US$59.95, 638 pp.
-The book includes the complete text of the ISO JPEG standards (DIS 10918-1
-and draft DIS 10918-2).  This is by far the most complete exposition of JPEG
-in existence, and we highly recommend it.
+The best currently available description of JPEG is the textbook "JPEG Still
+Image Data Compression Standard" by William B. Pennebaker and Joan L.
+Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.
+Price US$59.95, 638 pp.  The book includes the complete text of the ISO JPEG
+standards (DIS 10918-1 and draft DIS 10918-2).
 
-The JPEG standard itself is not available electronically; you must order a
-paper copy through ISO or ITU.  (Unless you feel a need to own a certified
-official copy, we recommend buying the Pennebaker and Mitchell book instead;
-it's much cheaper and includes a great deal of useful explanatory material.)
-In the USA, copies of the standard may be ordered from ANSI Sales at (212)
-642-4900, or from Global Engineering Documents at (800) 854-7179.  (ANSI
-doesn't take credit card orders, but Global does.)  It's not cheap: as of
-1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
-shipping/handling.  The standard is divided into two parts, Part 1 being the
-actual specification, while Part 2 covers compliance testing methods.  Part 1
-is titled "Digital Compression and Coding of Continuous-tone Still Images,
+The original JPEG standard is divided into two parts, Part 1 being the actual
+specification, while Part 2 covers compliance testing methods.  Part 1 is
+titled "Digital Compression and Coding of Continuous-tone Still Images,
 Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
 10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding of
 Continuous-tone Still Images, Part 2: Compliance testing" and has document
 numbers ISO/IEC IS 10918-2, ITU-T T.83.
 
-Some extensions to the original JPEG standard are defined in JPEG Part 3,
-a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84.  IJG
-currently does not support any Part 3 extensions.
-
 The JPEG standard does not specify all details of an interchangeable file
 format.  For the omitted details we follow the "JFIF" conventions, revision
-1.02.  A copy of the JFIF spec is available from:
-	Literature Department
-	C-Cube Microsystems, Inc.
-	1778 McCarthy Blvd.
-	Milpitas, CA 95035
-	phone (408) 944-6300,  fax (408) 944-6314
-A PostScript version of this document is available by FTP at
-ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz.  There is also a plain text
-version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing
-the figures.
+1.02.  JFIF 1.02 has been adopted as an Ecma International Technical Report
+and thus received a formal publication status.  It is available as a free
+download in PDF format from
+http://www.ecma-international.org/publications/techreports/E-TR-098.htm.
+A PostScript version of the JFIF document is available at
+http://www.ijg.org/files/jfif.ps.gz.  There is also a plain text version at
+http://www.ijg.org/files/jfif.txt.gz, but it is missing the figures.
 
 The TIFF 6.0 file format specification can be obtained by FTP from
 ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
 found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
 IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
 Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
-(Compression tag 7).  Copies of this Note can be obtained from ftp.sgi.com or
-from ftp://ftp.uu.net/graphics/jpeg/.  It is expected that the next revision
+(Compression tag 7).  Copies of this Note can be obtained from
+http://www.ijg.org/files/.  It is expected that the next revision
 of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
 Although IJG's own code does not support TIFF/JPEG, the free libtiff library
-uses our library to implement TIFF/JPEG per the Note.  libtiff is available
-from ftp://ftp.sgi.com/graphics/tiff/.
+uses our library to implement TIFF/JPEG per the Note.
 
 
 ARCHIVE LOCATIONS
 =================
 
-The "official" archive site for this software is ftp.uu.net (Internet
-address 192.48.96.9).  The most recent released version can always be found
-there in directory graphics/jpeg.  This particular version will be archived
-as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz.  If you don't have
-direct Internet access, UUNET's archives are also available via UUCP; contact
-help@uunet.uu.net for information on retrieving files that way.
+The "official" archive site for this software is www.ijg.org.
+The most recent released version can always be found there in
+directory "files".  This particular version will be archived as
+http://www.ijg.org/files/jpegsrc.v8b.tar.gz, and in Windows-compatible
+"zip" archive format as http://www.ijg.org/files/jpegsr8b.zip.
 
-Numerous Internet sites maintain copies of the UUNET files.  However, only
-ftp.uu.net is guaranteed to have the latest official version.
-
-You can also obtain this software in DOS-compatible "zip" archive format from
-the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
-on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12
-"JPEG Tools".  Again, these versions may sometimes lag behind the ftp.uu.net
-release.
-
-The JPEG FAQ (Frequently Asked Questions) article is a useful source of
-general information about JPEG.  It is updated constantly and therefore is
-not included in this distribution.  The FAQ is posted every two weeks to
-Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
+The JPEG FAQ (Frequently Asked Questions) article is a source of some
+general information about JPEG.
 It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
 and other news.answers archive sites, including the official news.answers
 archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
@@ -314,79 +270,20 @@ with body
 	send usenet/news.answers/jpeg-faq/part2
 
 
-RELATED SOFTWARE
-================
-
-Numerous viewing and image manipulation programs now support JPEG.  (Quite a
-few of them use this library to do so.)  The JPEG FAQ described above lists
-some of the more popular free and shareware viewers, and tells where to
-obtain them on Internet.
-
-If you are on a Unix machine, we highly recommend Jef Poskanzer's free
-PBMPLUS software, which provides many useful operations on PPM-format image
-files.  In particular, it can convert PPM images to and from a wide range of
-other formats, thus making cjpeg/djpeg considerably more useful.  The latest
-version is distributed by the NetPBM group, and is available from numerous
-sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
-Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is;
-you are likely to have difficulty making it work on any non-Unix machine.
-
-A different free JPEG implementation, written by the PVRG group at Stanford,
-is available from ftp://havefun.stanford.edu/pub/jpeg/.  This program
-is designed for research and experimentation rather than production use;
-it is slower, harder to use, and less portable than the IJG code, but it
-is easier to read and modify.  Also, the PVRG code supports lossless JPEG,
-which we do not.  (On the other hand, it doesn't do progressive JPEG.)
-
-
 FILE FORMAT WARS
 ================
 
-Some JPEG programs produce files that are not compatible with our library.
-The root of the problem is that the ISO JPEG committee failed to specify a
-concrete file format.  Some vendors "filled in the blanks" on their own,
-creating proprietary formats that no one else could read.  (For example, none
-of the early commercial JPEG implementations for the Macintosh were able to
-exchange compressed files.)
-
-The file format we have adopted is called JFIF (see REFERENCES).  This format
-has been agreed to by a number of major commercial JPEG vendors, and it has
-become the de facto standard.  JFIF is a minimal or "low end" representation.
-We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF
-Technical Note #2) for "high end" applications that need to record a lot of
-additional data about an image.  TIFF/JPEG is fairly new and not yet widely
-supported, unfortunately.
-
-The upcoming JPEG Part 3 standard defines a file format called SPIFF.
-SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should
-be able to read the most common variant of SPIFF.  SPIFF has some technical
-advantages over JFIF, but its major claim to fame is simply that it is an
-official standard rather than an informal one.  At this point it is unclear
-whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto
-standard.  IJG intends to support SPIFF once the standard is frozen, but we
-have not decided whether it should become our default output format or not.
-(In any case, our decoder will remain capable of reading JFIF indefinitely.)
-
-Various proprietary file formats incorporating JPEG compression also exist.
-We have little or no sympathy for the existence of these formats.  Indeed,
+The ISO JPEG standards committee actually promotes different formats like
+"JPEG 2000" or "JPEG XR" which are incompatible with original DCT-based
+JPEG.  IJG therefore does not support these formats (see REFERENCES).  Indeed,
 one of the original reasons for developing this free software was to help
-force convergence on common, open format standards for JPEG files.  Don't
-use a proprietary file format!
+force convergence on common, interoperable format standards for JPEG files.
+Don't use an incompatible file format!
+(In any case, our decoder will remain capable of reading existing JPEG
+image files indefinitely.)
 
 
 TO DO
 =====
 
-The major thrust for v7 will probably be improvement of visual quality.
-The current method for scaling the quantization tables is known not to be
-very good at low Q values.  We also intend to investigate block boundary
-smoothing, "poor man's variable quantization", and other means of improving
-quality-vs-file-size performance without sacrificing compatibility.
-
-In future versions, we are considering supporting some of the upcoming JPEG
-Part 3 extensions --- principally, variable quantization and the SPIFF file
-format.
-
-As always, speeding things up is of great interest.
-
-Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net.
+Please send bug reports, offers of help, etc. to jpeg-info@uc.ag.

README-turbo.txt

@@ -2,22 +2,23 @@
 **     Background
 *******************************************************************************
 
-libjpeg-turbo is a high-speed version of libjpeg for x86 and x86-64 processors
-which uses SIMD instructions (MMX, SSE2, etc.) to accelerate baseline JPEG
-compression and decompression.  libjpeg-turbo is generally 2-4x as fast
+libjpeg-turbo is a derivative of libjpeg which uses SIMD instructions (MMX,
+SSE2, etc.) to accelerate baseline JPEG compression and decompression on x86
+and x86-64 systems.  On such systems, libjpeg-turbo is generally 2-4x as fast
 as the unmodified version of libjpeg, all else being equal.
 
 libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but
-the TigerVNC and VirtualGL projects made numerous enhancements to the codec,
-including improved support for Mac OS X, 64-bit support, support for 32-bit
-and big endian pixel formats, accelerated Huffman encoding/decoding, and
-various bug fixes.  The goal was to produce a fully open source codec that
-could replace the partially closed source TurboJPEG/IPP codec used by VirtualGL
-and TurboVNC.  libjpeg-turbo generally performs in the range of 80-120% of
-TurboJPEG/IPP.  It is faster in some areas but slower in others.
+the TigerVNC and VirtualGL projects made numerous enhancements to the codec in
+2009, including improved support for Mac OS X, 64-bit support, support for
+32-bit and big endian pixel formats (RGBX, XBGR, etc.), accelerated Huffman
+encoding/decoding, and various bug fixes.  The goal was to produce a fully open
+source codec that could replace the partially closed source TurboJPEG/IPP codec
+used by VirtualGL and TurboVNC.  libjpeg-turbo generally performs in the range
+of 80-120% of TurboJPEG/IPP.  It is faster in some areas but slower in others.
 
-It was decided to split libjpeg-turbo into a separate SDK so that other
-projects could take advantage of this technology.  The libjpeg-turbo shared
+In early 2010, libjpeg-turbo spun off into its own independent project, with
+the goal of making high-speed JPEG compression/decompression technology
+available to a broader range of users and developers.  The libjpeg-turbo shared
 libraries can be used as drop-in replacements for libjpeg on most systems.
 
 
@@ -25,11 +26,21 @@ libraries can be used as drop-in replacements for libjpeg on most systems.
 **     License
 *******************************************************************************
 
-Some of the optimizations to the Huffman encoder/decoder were borrowed from
-VirtualGL, and thus the libjpeg-turbo distribution, as a whole, falls under the
-wxWindows Library Licence, Version 3.1.  A copy of this license can be found in
-this directory under LICENSE.txt.  The rest of the source code, apart from
-these modifications, falls under a less restrictive license (see README.)
+The TurboJPEG/OSS wrapper, as well as some of the optimizations to the Huffman
+encoder (jchuff.c) and decoder (jdhuff.c), were borrowed from VirtualGL, and
+thus any distribution of libjpeg-turbo which includes those files must, as a
+whole, be subject to the terms of the wxWindows Library Licence, Version 3.1.
+A copy of this license can be found in this directory under LICENSE.txt.  The
+wxWindows Library License is based on the LGPL but includes provisions which
+allow the Library to be statically linked into proprietary libraries and
+applications without requiring the resulting binaries to be distributed under
+the terms of the LGPL.
+
+The rest of the source code, apart from TurboJPEG/OSS and the Huffman codec
+optimizations, falls under a less restrictive, BSD-style license (see README.)
+You can choose to distribute libjpeg-turbo, as a whole, under this BSD-style
+license by simply removing TurboJPEG/OSS and replacing the optimized jchuff.c
+and jdhuff.c with their unoptimized counterparts from the libjpeg v6b source.
 
 
 *******************************************************************************
@@ -41,7 +52,7 @@ Replacing libjpeg at Run Time
 =============================
 
 If a Unix application is dynamically linked with libjpeg, then you can replace
-libjpeg with libjpeg-turbo at run time by manipulating the LD_LIBRARY_PATH.
+libjpeg with libjpeg-turbo at run time by manipulating LD_LIBRARY_PATH.
 For instance:
 
   [Using libjpeg]
@@ -57,7 +68,7 @@ For instance:
   user  0m0.029s
   sys   0m0.010s
 
-NOTE: {lib} can be lib, lib32, lib64, or lib/amd64, depending on the O/S and
+NOTE: {lib} can be lib, lib32, lib64, or lib/64, depending on the O/S and
 architecture.
 
 System administrators can also replace the libjpeg sym links in /usr/{lib} with
@@ -65,56 +76,59 @@ links to the libjpeg dynamic library located in /opt/libjpeg-turbo/{lib}.  This
 will effectively accelerate every dynamically linked libjpeg application on the
 system.
 
-The Windows distribution of the libjpeg-turbo SDK installs jpeg62.dll into
-c:\libjpeg-turbo\bin, and the PATH environment variable can be modified such
-that this directory is searched before any others that might contain
-jpeg62.dll.  However, if jpeg62.dll also exists in an application's install
-directory, then Windows will load the application's version of it first.  Thus,
-if an application ships with jpeg62.dll, then back up the application's version
-of jpeg62.dll and copy c:\libjpeg-turbo\bin\jpeg62.dll into the application's
-install directory to accelerate it.
+The libjpeg-turbo SDK for Visual C++ installs the libjpeg-turbo DLL
+(jpeg62.dll, jpeg7.dll, or jpeg8.dll, depending on whether libjpeg v6b, v7, or
+v8 emulation is enabled) into c:\libjpeg-turbo[64]\bin, and the PATH
+environment variable can be modified such that this directory is searched
+before any others that might contain a libjpeg DLL.  However, if a libjpeg
+DLL exists in an application's install directory, then Windows will load this
+DLL first whenever the application is launched.  Thus, if an application ships
+with jpeg62.dll, jpeg7.dll, or jpeg8.dll, then back up the application's
+version of this DLL and copy c:\libjpeg-turbo[64]\bin\jpeg*.dll into the
+application's install directory to accelerate it.
 
-The version of jpeg62.dll distributed in the libjpeg-turbo SDK requires the
-Visual C++ 2008 C run time DLL (msvcr90.dll).  This library ships with more
-recent versions of Windows, but users of older versions can obtain it from the
-Visual C++ 2008 Redistributable Package, which is available as a free download
-from Microsoft's web site.
+The version of the libjpeg-turbo DLL distributed in the libjpeg-turbo SDK for
+Visual C++ requires the Visual C++ 2008 C run time DLL (msvcr90.dll).
+msvcr90.dll ships with more recent versions of Windows, but users of older
+Windows releases can obtain it from the Visual C++ 2008 Redistributable
+Package, which is available as a free download from Microsoft's web site.
 
 NOTE:  Features of libjpeg which require passing a C run time structure, such
 as a file handle, from an application to libjpeg will probably not work with
-the distributed version of jpeg62.dll unless the application is also built to
-use the Visual C++ 2008 C run time DLL.  In particular, this affects
-jpeg_stdio_dest() and jpeg_stdio_src().
+the version of the libjpeg-turbo DLL distributed in the libjpeg-turbo SDK for
+Visual C++, unless the application is also built to use the Visual C++ 2008 C
+run time DLL.  In particular, this affects jpeg_stdio_dest() and
+jpeg_stdio_src().
 
-Mac applications typically embed their own copies of libjpeg.62.dylib inside
+Mac applications typically embed their own copies of the libjpeg dylib inside
 the (hidden) application bundle, so it is not possible to globally replace
 libjpeg on OS X systems.  If an application uses a shared library version of
 libjpeg, then it may be possible to replace the application's version of it.
-This would generally involve copying libjpeg.62.dylib into the appropriate
-place in the application bundle and using install_name_tool to repoint the
-dylib to the new directory.  This requires an advanced knowledge of OS X and
-would not survive an upgrade or a re-install of the application.  Thus, it is
-not recommended for most users.
+This would generally involve copying libjpeg.*.dylib from libjpeg-turbo into
+the appropriate place in the application bundle and using install_name_tool to
+repoint the dylib to the new directory.  This requires an advanced knowledge of
+OS X and would not survive an upgrade or a re-install of the application.
+Thus, it is not recommended for most users.
 
 =======================
 Replacing TurboJPEG/IPP
 =======================
 
 libjpeg-turbo is a drop-in replacement for the TurboJPEG/IPP SDK used by
-VirtualGL 2.1.x (and prior) and TurboVNC.  libjpeg-turbo contains a wrapper
+VirtualGL 2.1.x and TurboVNC 0.6 (and prior.)  libjpeg-turbo contains a wrapper
 library (TurboJPEG/OSS) that emulates the TurboJPEG API using libjpeg-turbo
 instead of the closed source Intel Performance Primitives.  You can replace the
 TurboJPEG/IPP package on Linux systems with the libjpeg-turbo package in order
-to make existing releases of VirtualGL 2.1.x and TurboVNC use the new codec at
-run time.  Note that the 64-bit libjpeg-turbo packages contain only 64-bit
-binaries, whereas the TurboJPEG/IPP 64-bit packages contain both 64-bit and
+to make existing releases of VirtualGL 2.1.x and TurboVNC 0.x use the new codec
+at run time.  Note that the 64-bit libjpeg-turbo packages contain only 64-bit
+binaries, whereas the TurboJPEG/IPP 64-bit packages contained both 64-bit and
 32-bit binaries.  Thus, to replace a TurboJPEG/IPP 64-bit package, install
 both the 64-bit and 32-bit versions of libjpeg-turbo.
 
-You can also build the VirtualGL 2.1.x and TurboVNC source code with
+You can also build the VirtualGL 2.1.x and TurboVNC 0.6 source code with
 the libjpeg-turbo SDK instead of TurboJPEG/IPP.  It should work identically.
 libjpeg-turbo also includes static library versions of TurboJPEG/OSS, which
-are used to build VirtualGL 2.2 and later.
+are used to build TurboVNC 1.0 and later.
 
 ========================================
 Using libjpeg-turbo in Your Own Programs
@@ -122,34 +136,29 @@ Using libjpeg-turbo in Your Own Programs
 
 For the most part, libjpeg-turbo should work identically to libjpeg, so in
 most cases, an application can be built against libjpeg and then run against
-libjpeg-turbo.  On Unix systems, you can build against libjpeg-turbo instead
-of libjpeg by setting
+libjpeg-turbo.  On Unix systems (including Cygwin), you can build against
+libjpeg-turbo instead of libjpeg by setting
 
   CPATH=/opt/libjpeg-turbo/include
   and
   LIBRARY_PATH=/opt/libjpeg-turbo/{lib}
 
-({lib} = lib, lib32, lib64, or lib/amd64, as appropriate.)
-
-If using Cygwin, then set
-
-  CPATH=/cygdrive/c/libjpeg-turbo-gcc/include
-  and
-  LIBRARY_PATH=/cygdrive/c/libjpeg-turbo-gcc/lib
+({lib} = lib32 or lib64, depending on whether you are building a 32-bit or a
+64-bit application.)
 
 If using MinGW, then set
 
-  CPATH=/c/libjpeg-turbo-gcc/include
+  CPATH=/c/libjpeg-turbo-gcc[64]/include
   and
-  LIBRARY_PATH=/c/libjpeg-turbo-gcc/lib
+  LIBRARY_PATH=/c/libjpeg-turbo-gcc[64]/lib
 
 Building against libjpeg-turbo is useful, for instance, if you want to build an
 application that leverages the libjpeg-turbo colorspace extensions (see below.)
-On Linux and Solaris systems, you would still need to manipulate the
-LD_LIBRARY_PATH or sym links appropriately to use libjpeg-turbo at run time.
-On such systems, you can pass -R /opt/libjpeg-turbo/{lib} to the linker to
-force the use of libjpeg-turbo at run time rather than libjpeg (also useful if
-you want to leverage the colorspace extensions), or you can link against the
+On Linux and Solaris systems, you would still need to manipulate
+LD_LIBRARY_PATH or create appropriate sym links to use libjpeg-turbo at run
+time.  On such systems, you can pass -R /opt/libjpeg-turbo/{lib} to the linker
+to force the use of libjpeg-turbo at run time rather than libjpeg (also useful
+if you want to leverage the colorspace extensions), or you can link against the
 libjpeg-turbo static library.
 
 To force a Linux, Solaris, or MinGW application to link against the static
@@ -157,22 +166,22 @@ version of libjpeg-turbo, you can use the following linker options:
 
   -Wl,-Bstatic -ljpeg -Wl,-Bdynamic
 
-On OS X, simply add /opt/libjpeg-turbo/{lib}/libjpeg.a to the linker command
+On OS X, simply add /opt/libjpeg-turbo/lib/libjpeg.a to the linker command
 line (this also works on Linux and Solaris.)
 
 To build Visual C++ applications using libjpeg-turbo, add
-c:\libjpeg-turbo\include to your system or user INCLUDE environment variable
-and c:\libjpeg-turbo\lib to your system or user LIB environment variable, and
-then link against either jpeg.lib (to use jpeg62.dll) or jpeg-static.lib (to
-use the static version of libjpeg-turbo.)
+c:\libjpeg-turbo[64]\include to the system or user INCLUDE environment
+variable and c:\libjpeg-turbo[64]\lib to the system or user LIB environment
+variable, and then link against either jpeg.lib (to use the DLL version of
+libjpeg-turbo) or jpeg-static.lib (to use the static version of libjpeg-turbo.)
 
 =====================
 Colorspace Extensions
 =====================
 
 libjpeg-turbo includes extensions which allow JPEG images to be compressed
-directly from (and decompressed directly to) buffers which use BGR, BGRA,
-RGBA, ABGR, and ARGB pixel ordering.  This is implemented with six new
+directly from (and decompressed directly to) buffers which use BGR, BGRX,
+RGBX, XBGR, and XRGB pixel ordering.  This is implemented with six new
 colorspace constants:
 
   JCS_EXT_RGB   /* red/green/blue */
@@ -194,3 +203,102 @@ time with:
 
 At run time, attempting to use these extensions with a version of libjpeg
 that doesn't support them will result in a "Bogus input colorspace" error.
+
+=================================
+libjpeg v7 and v8 API/ABI support
+=================================
+
+libjpeg v7 and v8 added new features to the API/ABI, and, unfortunately, the
+compression and decompression structures were extended in a backward-
+incompatible manner to accommodate these features.  Thus, programs which are
+built to use libjpeg v7 or v8 did not work with libjpeg-turbo, since it is
+based on the libjpeg v6b code base.  Although libjpeg v7 and v8 are still not
+as widely used as v6b, enough programs (including a few Linux distros) have
+made the switch that it was desirable to provide support for the libjpeg v7/v8
+API/ABI in libjpeg-turbo.
+
+Some of the libjpeg v7 and v8 features -- DCT scaling, to name one -- involve
+deep modifications to the code which cannot be accommodated by libjpeg-turbo
+without either breaking compatibility with libjpeg v6b or producing an
+unsupportable mess.  In order to fully support libjpeg v8 with all of its
+features, we would have to essentially port the SIMD extensions to the libjpeg
+v8 code base and maintain two separate code trees.  We are hesitant to do this
+until/unless the newer libjpeg code bases garner more community support and
+involvement and until/unless we have some notion of whether future libjpeg
+releases will also be backward-incompatible.
+
+By passing an argument of --with-jpeg7 or --with-jpeg8 to configure, or an
+argument of -DWITH_JPEG7=1 or -DWITH_JPEG8=1 to cmake, you can build a version
+of libjpeg-turbo which emulates the libjpeg v7 or v8 API/ABI, so that programs
+which are built against libjpeg v7 or v8 can be run with libjpeg-turbo.  The
+following section describes which libjpeg v7+ features are supported and which
+aren't.
+
+libjpeg v7 and v8 Features:
+---------------------------
+
+Fully supported:
+
+-- cjpeg: Separate quality settings for luminance and chrominance
+   Note that the libpjeg v7+ API was extended to accommodate this feature only
+   for convenience purposes.  It has always been possible to implement this
+   feature with libjpeg v6b (see rdswitch.c for an example.)
+
+-- cjpeg: 32-bit BMP support
+
+-- jpegtran: lossless cropping
+
+-- jpegtran: -perfect option
+
+-- rdjpgcom: -raw option
+
+-- rdjpgcom: locale awareness
+
+
+Fully supported when using libjpeg v7/v8 emulation:
+
+-- libjpeg: In-memory source and destination managers
+
+
+Not supported:
+
+-- libjpeg: DCT scaling in compressor
+   cinfo.scale_num and cinfo.scale_denom are silently ignored.
+
+-- libjpeg: IDCT scaling extensions in decompressor
+   libjpeg-turbo still supports IDCT scaling with scaling factors of 1/2, 1/4,
+   and 1/8 (same as libjpeg v6b.)
+
+-- libjpeg: Fancy downsampling in compressor
+   cinfo.do_fancy_downsampling is silently ignored.
+
+-- jpegtran: Scaling
+   Seems to depend on the DCT scaling feature, which isn't supported.
+
+
+*******************************************************************************
+**     Performance pitfalls
+*******************************************************************************
+
+===============
+Restart Markers
+===============
+
+The optimized Huffman decoder in libjpeg-turbo does not handle restart markers
+in a way that makes libjpeg happy, so it is necessary to use the slow Huffman
+decoder when decompressing a JPEG image that has restart markers.  This can
+cause the decompression performance to drop by as much as 20%, but the
+performance will still be much much greater than that of libjpeg v6b.  Many
+consumer packages, such as PhotoShop, use restart markers when generating JPEG
+images, so images generated by those programs will experience this issue.
+
+===============================================
+Fast Integer Forward DCT at High Quality Levels
+===============================================
+
+The algorithm used by the SIMD-accelerated quantization function cannot produce
+correct results whenever the fast integer forward DCT is used along with a JPEG
+quality of 98-100.  Thus, libjpeg-turbo must use the non-SIMD quantization
+function in those cases.  This causes performance to drop by as much as 40%.
+It is therefore strongly advised that you use the slow integer forward DCT
+whenever encoding images with a JPEG quality of 98 or higher.

acinclude.m4

@@ -44,7 +44,14 @@ case "$host_os" in
     if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
       objfmt='BSD-a.out'
     else
-      objfmt='ELF'
+      case "$host_cpu" in
+        x86_64 | amd64)
+          objfmt='ELF64'
+          ;;
+        *)
+          objfmt='ELF'
+          ;;
+      esac
     fi
   ;;
   solaris* | sunos* | sysv* | sco*)

bmp.h

@@ -1,5 +1,6 @@
 /* Copyright (C)2004 Landmark Graphics Corporation
  * Copyright (C)2005 Sun Microsystems, Inc.
+ * Copyright (C)2011 D. R. Commander
  *
  * This library is free software and may be redistributed and/or modified under
  * the terms of the wxWindows Library License, Version 3.1 or (at your option)
@@ -19,7 +20,7 @@
 #define __BMP_H__
 
 #define BMPPIXELFORMATS 6
-enum BMPPIXELFORMAT {BMP_RGB=0, BMP_RGBA, BMP_BGR, BMP_BGRA, BMP_ABGR, BMP_ARGB};
+enum BMPPIXELFORMAT {BMP_RGB=0, BMP_RGBX, BMP_BGR, BMP_BGRX, BMP_XBGR, BMP_XRGB};
 
 #ifdef __cplusplus
 extern "C" {

cderror.h

@@ -2,6 +2,7 @@
  * cderror.h
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -45,6 +46,7 @@ JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
 JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
 JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
 JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
+JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image")
 JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
 JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
 JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")

cdjpeg.h

@@ -104,6 +104,7 @@ typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
 #define jinit_write_targa	jIWrTarga
 #define read_quant_tables	RdQTables
 #define read_scan_script	RdScnScript
+#define set_quality_ratings     SetQRates
 #define set_quant_slots		SetQSlots
 #define set_sample_factors	SetSFacts
 #define read_color_map		RdCMap
@@ -131,8 +132,10 @@ EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
 /* cjpeg support routines (in rdswitch.c) */
 
 EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
-				    int scale_factor, boolean force_baseline));
+				       boolean force_baseline));
 EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
+EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg,
+					 boolean force_baseline));
 EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
 EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
 

change.log

@@ -1,6 +1,67 @@
 CHANGE LOG for Independent JPEG Group's JPEG software
 
 
+Version 8b  16-May-2010
+-----------------------
+
+Repair problem in new memory source manager with corrupt JPEG data.
+Thank to Ted Campbell and Samuel Chun for the report.
+
+
+Version 8a  28-Feb-2010
+-----------------------
+
+Writing tables-only datastreams via jpeg_write_tables works again.
+
+Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg.
+Thank to Brett Blackham for the suggestion.
+
+
+Version 8  10-Jan-2010
+----------------------
+
+Add sanity check in BMP reader module to avoid cjpeg crash for empty input
+image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error).
+
+Add data source and destination managers for read from and write to
+memory buffers.  New API functions jpeg_mem_src and jpeg_mem_dest.
+Thank to Roberto Boni from Italy for the suggestion.
+
+
+Version 7  27-Jun-2009
+----------------------
+
+cjpeg -quality option has been extended for support of separate quality
+settings for luminance and chrominance (or in general, for every provided
+quantization table slot).
+New API function jpeg_default_qtables() and q_scale_factor array in library.
+
+Support arithmetic entropy encoding and decoding.
+Added files jaricom.c, jcarith.c, jdarith.c.
+
+jpegtran has a new "lossless" cropping feature.
+
+Implement -perfect option in jpegtran, new API function
+jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch)
+
+Better error messages for jpegtran fopen failure.
+(DP 203_jpegtran_errmsg.dpatch)
+
+Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c:
+according to Netpbm, the de facto standard implementation of the PNM formats,
+the most significant byte is first. (DP 203_rdppm.dpatch)
+
+Add -raw option to rdjpgcom not to mangle the output.
+(DP 205_rdjpgcom_raw.dpatch)
+
+Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch)
+
+Add extern "C" to jpeglib.h.
+This avoids the need to put extern "C" { ... } around #include "jpeglib.h"
+in your C++ application.  Defining the symbol DONT_USE_EXTERN_C in the
+configuration prevents this. (DP 202_jpeglib.h_c++.dpatch)
+
+
 Version 6b  27-Mar-1998
 -----------------------
 

cjpeg.1

@@ -1,4 +1,4 @@
-.TH CJPEG 1 "20 March 1998"
+.TH CJPEG 1 "11 October 2010"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -36,7 +36,7 @@ though for brevity these are not mentioned below.
 .PP
 The basic switches are:
 .TP
-.BI \-quality " N"
+.BI \-quality " N[,...]"
 Scale quantization tables to adjust image quality.  Quality is 0 (worst) to
 100 (best); default is 75.  (See below for more info.)
 .TP
@@ -108,6 +108,36 @@ other JPEG programs may be unable to decode the resulting file.  Use
 .B \-baseline
 if you need to ensure compatibility at low quality values.)
 .PP
+The \fB-quality\fR option has been extended in this version of \fBcjpeg\fR to
+support separate quality settings for luminance and chrominance (or, in
+general, separate settings for every quantization table slot.)  The principle
+is the same as chrominance subsampling:  since the human eye is more sensitive
+to spatial changes in brightness than spatial changes in color, the chrominance
+components can be quantized more than the luminance components without
+incurring any visible image quality loss.  However, unlike subsampling, this
+feature reduces data in the frequency domain instead of the spatial domain,
+which allows for more fine-grained control.  This option is useful in
+quality-sensitive applications, for which the artifacts generated by
+subsampling may be unacceptable.
+.PP
+The \fB-quality\fR option accepts a comma-separated list of parameters, which
+respectively refer to the quality levels which should be assigned to the
+quantization table slots.  If there are more q-table slots than parameters,
+then the last parameter is replicated.  Thus, if only one quality parameter is
+given, this is used for both luminance and chrominance (slots 0 and 1,
+respectively), preserving the legacy behavior of cjpeg v6b and prior.
+More (or customized) quantization tables can be set with the \fB-qtables\fR
+option and assigned to components with the \fB-qslots\fR option (see the
+"wizard" switches below.)
+.PP
+JPEG files generated with separate luminance and chrominance quality are fully
+compliant with standard JPEG decoders.
+.PP
+.BR CAUTION:
+For this setting to be useful, be sure to pass an argument of \fB-sample 1x1\fR
+to \fBcjpeg\fR to disable chrominance subsampling.  Otherwise, the default
+subsampling level (2x2, AKA "4:2:0") will be used.
+.PP
 The
 .B \-progressive
 switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
@@ -117,9 +147,6 @@ scan to display a low-quality image very quickly, and can then improve the
 display with each subsequent scan.  The final image is exactly equivalent to a
 standard JPEG file of the same quality setting, and the total file size is
 about the same --- often a little smaller.
-.B Caution:
-progressive JPEG is not yet widely implemented, so many decoders will be
-unable to view a progressive JPEG file at all.
 .PP
 Switches for advanced users:
 .TP
@@ -187,6 +214,12 @@ visibly blur the image, however.
 .PP
 Switches for wizards:
 .TP
+.B \-arithmetic
+Use arithmetic coding.
+.B Caution:
+arithmetic coded JPEG is not yet widely implemented, so many decoders will be
+unable to view an arithmetic coded JPEG file at all.
+.TP
 .B \-baseline
 Force baseline-compatible quantization tables to be generated.  This clamps
 quantization values to 8 bits even at low quality settings.  (This switch is
@@ -211,7 +244,7 @@ Use the scan script given in the specified text file.
 .PP
 The "wizard" switches are intended for experimentation with JPEG.  If you
 don't know what you are doing, \fBdon't use them\fR.  These switches are
-documented further in the file wizard.doc.
+documented further in the file wizard.txt.
 .SH EXAMPLES
 .LP
 This example compresses the PPM file foo.ppm with a quality factor of
@@ -276,11 +309,10 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
-Use a Unisys-licensed program if you need to read a GIF file.  (Conversion
-of GIF files to JPEG is usually a bad idea anyway.)
+Support for GIF input files was removed in cjpeg v6b due to concerns over
+the Unisys LZW patent.  Although this patent expired in 2006, cjpeg still
+lacks GIF support, for these historical reasons.  (Conversion of GIF files to
+JPEG is usually a bad idea anyway.)
 .PP
 Not all variants of BMP and Targa file formats are supported.
 .PP
@@ -288,5 +320,3 @@ The
 .B \-targa
 switch is not a bug, it's a feature.  (It would be a bug if the Targa format
 designers had not been clueless.)
-.PP
-Still not as fast as we'd like.

cjpeg.c

@@ -2,6 +2,8 @@
  * cjpeg.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2008 by Guido Vollbeding.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -25,6 +27,7 @@
 
 #include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
 #include "jversion.h"		/* for version message */
+#include "config.h"
 
 #ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
 #ifdef __MWERKS__
@@ -149,7 +152,7 @@ usage (void)
 #endif
 
   fprintf(stderr, "Switches (names may be abbreviated):\n");
-  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -quality N[,...]   Compression quality (0..100; 5-95 is useful range)\n");
   fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
 #ifdef ENTROPY_OPT_SUPPORTED
   fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
@@ -209,21 +212,16 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 {
   int argn;
   char * arg;
-  int quality;			/* -quality parameter */
-  int q_scale_factor;		/* scaling percentage for -qtables */
   boolean force_baseline;
   boolean simple_progressive;
+  char * qualityarg = NULL;	/* saves -quality parm if any */
   char * qtablefile = NULL;	/* saves -qtables filename if any */
   char * qslotsarg = NULL;	/* saves -qslots parm if any */
   char * samplearg = NULL;	/* saves -sample parm if any */
   char * scansarg = NULL;	/* saves -scans parm if any */
 
   /* Set up default JPEG parameters. */
-  /* Note that default -quality level need not, and does not,
-   * match the default scaling for an explicit -qtables argument.
-   */
-  quality = 75;			/* default -quality value */
-  q_scale_factor = 100;		/* default to no scaling for -qtables */
+
   force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
   simple_progressive = FALSE;
   is_targa = FALSE;
@@ -277,7 +275,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       static boolean printed_version = FALSE;
 
       if (! printed_version) {
-	fprintf(stderr, "Independent JPEG Group's CJPEG, version %s\n%s\n",
+	fprintf(stderr, "%s version %s (build %s)\n",
+		PACKAGE_NAME, VERSION, BUILD);
+	fprintf(stderr, "%s\n\n", LJTCOPYRIGHT);
+	fprintf(stderr, "Based on Independent JPEG Group's libjpeg, version %s\n%s\n\n",
 		JVERSION, JCOPYRIGHT);
 	printed_version = TRUE;
       }
@@ -328,13 +329,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 #endif
 
     } else if (keymatch(arg, "quality", 1)) {
-      /* Quality factor (quantization table scaling factor). */
+      /* Quality ratings (quantization table scaling factors). */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d", &quality) != 1)
-	usage();
-      /* Change scale factor in case -qtables is present. */
-      q_scale_factor = jpeg_quality_scaling(quality);
+      qualityarg = argv[argn];
 
     } else if (keymatch(arg, "qslots", 2)) {
       /* Quantization table slot numbers. */
@@ -382,7 +380,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
        * default sampling factors.
        */
 
-    } else if (keymatch(arg, "scans", 2)) {
+    } else if (keymatch(arg, "scans", 4)) {
       /* Set scan script. */
 #ifdef C_MULTISCAN_FILES_SUPPORTED
       if (++argn >= argc)	/* advance to next argument */
@@ -422,11 +420,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 
     /* Set quantization tables for selected quality. */
     /* Some or all may be overridden if -qtables is present. */
-    jpeg_set_quality(cinfo, quality, force_baseline);
+    if (qualityarg != NULL)	/* process -quality if it was present */
+      if (! set_quality_ratings(cinfo, qualityarg, force_baseline))
+	usage();
 
     if (qtablefile != NULL)	/* process -qtables if it was present */
-      if (! read_quant_tables(cinfo, qtablefile,
-			      q_scale_factor, force_baseline))
+      if (! read_quant_tables(cinfo, qtablefile, force_baseline))
 	usage();
 
     if (qslotsarg != NULL)	/* process -qslots if it was present */

cmakescripts/getdate.bat

@@ -0,0 +1,3 @@
+@echo off
+for /f "tokens=1-4 eol=/ DELIMS=/ " %%i in ('date /t') do set BUILD=%%l%%j%%k
+echo %BUILD%

coderules.txt

@@ -103,7 +103,7 @@ should be in the common data structures.
 
 4. Don't use static variables except for read-only constant tables.  Variables
 that should be private to a module can be placed into private structures (see
-the system architecture document, structure.doc).
+the system architecture document, structure.txt).
 
 5. Source file names should begin with "j" for files that are part of the
 library proper; source files that are not part of the library, such as cjpeg.c

configure.ac

@@ -2,7 +2,7 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ([2.56])
-AC_INIT([libjpeg-turbo], [0.0.90])
+AC_INIT([libjpeg-turbo], [1.1.1])
 BUILD=`date +%Y%m%d`
 
 AM_INIT_AUTOMAKE([-Wall foreign dist-bzip2])
@@ -10,46 +10,29 @@ AC_PREFIX_DEFAULT(/opt/libjpeg-turbo)
 
 # Always build with prototypes
 AC_DEFINE([HAVE_PROTOTYPES], 1, [Define if your compiler supports prototypes])
-# Don't use undefined types
-AC_DEFINE([INCOMPLETE_TYPES_BROKEN], 1, [Define if you want use complete types])
 
 # Checks for programs.
 SAVED_CFLAGS=${CFLAGS}
-SAVED_CXXFLAGS=${CXXFLAGS}
+SAVED_CPPFLAGS=${CPPFLAGS}
 AC_PROG_CPP
 AC_PROG_CC
-AC_PROG_CXX
 AC_PROG_INSTALL
 AC_PROG_LIBTOOL
 AC_PROG_LN_S
 
-AC_MSG_CHECKING([whether the linker supports version scripts])
-VERSION_SCRIPT=no
-LDVER=`$LD --help </dev/null 2>&1 | grep "\-\-version-script"`
-if test "$LDVER"; then
-  VERSION_SCRIPT=yes
-  VERSION_SCRIPT_FLAG=-Wl,--version-script,
-  AC_MSG_RESULT(yes)
-else
-  LDVER=`$LD --help </dev/null 2>&1 | grep "\-M"`
-  if test "$LDVER"; then
-    VERSION_SCRIPT=yes
-    VERSION_SCRIPT_FLAG=-Wl,-M,
-    AC_MSG_RESULT(yes)
-  else
-    AC_MSG_RESULT(no)
-  fi
-fi
-
-AM_CONDITIONAL(VERSION_SCRIPT, test "x$VERSION_SCRIPT" = "xyes")
-AC_SUBST(VERSION_SCRIPT_FLAG)
+# Check whether compiler supports pointers to undefined structures
+AC_MSG_CHECKING(whether compiler supports pointers to undefined structures)
+AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], ,
+AC_MSG_RESULT(yes),
+[AC_MSG_RESULT(no)
+AC_DEFINE([INCOMPLETE_TYPES_BROKEN],[1],[Compiler does not support pointers to undefined structures.])])
 
 if test "x${GCC}" = "xyes"; then
   if test "x${SAVED_CFLAGS}" = "x"; then
     CFLAGS=-O3
   fi
-  if test "x${SAVED_CXXFLAGS}" = "x"; then
-    CXXFLAGS=-O3
+  if test "x${SAVED_CPPFLAGS}" = "x"; then
+    CPPFLAGS=-Wall
   fi
 fi
 
@@ -58,9 +41,6 @@ if test "x${SUNCC}" = "xyes"; then
   if test "x${SAVED_CFLAGS}" = "x"; then
     CFLAGS=-xO5
   fi
-  if test "x${SAVED_CXXFLAGS}" = "x"; then
-    CXXFLAGS=-xO5
-  fi
 fi
 
 # Checks for libraries.
@@ -118,22 +98,112 @@ AC_CHECK_FUNCS([memset memcpy], [],
 	[AC_DEFINE([NEED_BSD_STRINGS], 1,
 		   [Define if you have BSD-like bzero and bcopy])])
 
-# Set flags to indicate platform
-case "$host_os" in
-  cygwin* | mingw* | pw32* | interix*)
-    is_win32=1
-  ;;
-esac
-AM_CONDITIONAL([IS_WIN32], [test "x$is_win32" = "x1"])
+AC_MSG_CHECKING([libjpeg API version])
+AC_ARG_VAR(JPEG_LIB_VERSION, [libjpeg API version (62, 70, or 80)])
+if test "x$JPEG_LIB_VERSION" = "x"; then
+    AC_ARG_WITH([jpeg7],
+        AC_HELP_STRING([--with-jpeg7], [Emulate libjpeg v7 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b.)]))
+    AC_ARG_WITH([jpeg8],
+        AC_HELP_STRING([--with-jpeg8], [Emulate libjpeg v8 API/ABI (this makes libjpeg-turbo backward incompatible with libjpeg v6b.)]))
+    if test "x${with_jpeg8}" = "xyes"; then
+        JPEG_LIB_VERSION=80
+    else
+        if test "x${with_jpeg7}" = "xyes"; then
+            JPEG_LIB_VERSION=70
+        else
+            JPEG_LIB_VERSION=62
+        fi
+    fi
+fi
+JPEG_LIB_VERSION_DECIMAL=`expr $JPEG_LIB_VERSION / 10`.`expr $JPEG_LIB_VERSION % 10`
+AC_SUBST(JPEG_LIB_VERSION_DECIMAL)
+AC_MSG_RESULT([$JPEG_LIB_VERSION_DECIMAL])
+AC_DEFINE_UNQUOTED(JPEG_LIB_VERSION, [$JPEG_LIB_VERSION], [libjpeg API version])
+
+AC_MSG_CHECKING([libjpeg shared library version])
+AC_ARG_VAR(SO_MAJOR_VERSION, [Major version of the libjpeg-turbo shared library (default is determined by the API version)])
+AC_ARG_VAR(SO_MINOR_VERSION, [Minor version of the libjpeg-turbo shared library (default is determined by the API version)])
+if test "x$SO_MAJOR_VERSION" = "x"; then
+    case "$JPEG_LIB_VERSION" in
+        62)  SO_MAJOR_VERSION=$JPEG_LIB_VERSION ;;
+        *)   SO_MAJOR_VERSION=`expr $JPEG_LIB_VERSION / 10` ;;
+    esac
+fi
+if test "x$SO_MINOR_VERSION" = "x"; then
+    case "$JPEG_LIB_VERSION" in
+        80)  SO_MINOR_VERSION=2 ;;
+        *)   SO_MINOR_VERSION=0 ;;
+    esac
+fi
+AC_MSG_RESULT([$SO_MAJOR_VERSION:$SO_MINOR_VERSION])
+AC_SUBST(SO_MAJOR_VERSION)
+AC_SUBST(SO_MINOR_VERSION)
+
+VERSION_SCRIPT=yes
+AC_ARG_ENABLE([ld-version-script],
+  AS_HELP_STRING([--disable-ld-version-script],
+    [Disable linker version script for libjpeg-turbo (default is to use linker version script if the linker supports it)]),
+    [VERSION_SCRIPT=$enableval], [])
+
+AC_MSG_CHECKING([whether the linker supports version scripts])
+SAVED_LDFLAGS="$LDFLAGS"
+LDFLAGS="$LDFLAGS -Wl,--version-script,conftest.map"
+cat > conftest.map <<EOF
+VERS_1 {
+  global: *;
+};
+EOF
+AC_LINK_IFELSE(AC_LANG_PROGRAM([], []),
+  [VERSION_SCRIPT_FLAG=-Wl,--version-script,; AC_MSG_RESULT([yes (GNU style)])], [])
+if test "x$VERSION_SCRIPT_FLAG" = "x"; then
+  LDFLAGS="$SAVED_LDFLAGS -Wl,-M,conftest.map"
+  AC_LINK_IFELSE(AC_LANG_PROGRAM([], []),
+    [VERSION_SCRIPT_FLAG=-Wl,-M,; AC_MSG_RESULT([yes (Sun style)])], [])
+fi
+if test "x$VERSION_SCRIPT_FLAG" = "x"; then
+  VERSION_SCRIPT=no
+  AC_MSG_RESULT(no)
+fi
+LDFLAGS="$SAVED_LDFLAGS"
+
+AC_MSG_CHECKING([whether to use version script when building libjpeg-turbo])
+AC_MSG_RESULT($VERSION_SCRIPT)
+
+AM_CONDITIONAL(VERSION_SCRIPT, test "x$VERSION_SCRIPT" = "xyes")
+AC_SUBST(VERSION_SCRIPT_FLAG)
+
+AC_MSG_CHECKING([whether to include arithmetic encoding support])
+AC_ARG_WITH([arith-enc],
+    AC_HELP_STRING([--without-arith-enc], [Omit arithmetic encoding support]))
+if test "x$with_arith_enc" = "xno"; then
+    AC_MSG_RESULT(no)
+else
+    AC_DEFINE([C_ARITH_CODING_SUPPORTED], [1], [Support arithmetic encoding])
+    AC_MSG_RESULT(yes)
+fi
+AM_CONDITIONAL([WITH_ARITH_ENC], [test "x$with_arith_enc" != "xno"])
+
+AC_MSG_CHECKING([whether to include arithmetic decoding support])
+AC_ARG_WITH([arith-dec],
+    AC_HELP_STRING([--without-arith-dec], [Omit arithmetic decoding support]))
+if test "x$with_arith_dec" = "xno"; then
+    AC_MSG_RESULT(no)
+else
+    AC_DEFINE([D_ARITH_CODING_SUPPORTED], [1], [Support arithmetic decoding])
+    AC_MSG_RESULT(yes)
+fi
+AM_CONDITIONAL([WITH_ARITH_DEC], [test "x$with_arith_dec" != "xno"])
+
+AM_CONDITIONAL([WITH_ARITH], [test "x$with_arith_dec" != "xno" -o "x$with_arith_enc" != "xno"])
 
 # SIMD is optional
 AC_ARG_WITH([simd],
-    AC_HELP_STRING([--without-simd],[Omit accelerated SIMD routines.]))
+    AC_HELP_STRING([--without-simd],[Omit SIMD extensions.]))
 if test "x${with_simd}" != "xno"; then
   # Check if we're on a supported CPU
   AC_MSG_CHECKING([if we have SIMD optimisations for cpu type])
   case "$host_cpu" in
-    x86_64)
+    x86_64 | amd64)
       AC_MSG_RESULT([yes (x86_64)])
       AC_PROG_NASM
       simd_arch=x86_64
@@ -145,7 +215,8 @@ if test "x${with_simd}" != "xno"; then
     ;;
     *)
       AC_MSG_RESULT([no ("$host_cpu")])
-      AC_MSG_ERROR([CPU is not supported])
+      AC_MSG_WARN([SIMD support not available for this CPU.  Performance will suffer.])
+      with_simd=no;
     ;;
   esac
 
@@ -157,7 +228,7 @@ fi
 AM_CONDITIONAL([WITH_SIMD], [test "x$with_simd" != "xno"])
 AM_CONDITIONAL([SIMD_I386], [test "x$simd_arch" = "xi386"])
 AM_CONDITIONAL([SIMD_X86_64], [test "x$simd_arch" = "xx86_64"])
-AM_CONDITIONAL([X86_64], [test "x$host_cpu" = "xx86_64"])
+AM_CONDITIONAL([X86_64], [test "x$host_cpu" = "xx86_64" -o "x$host_cpu" = "xamd64"])
 
 case "$host_cpu" in
   x86_64)
@@ -173,6 +244,7 @@ esac
 AC_SUBST(RPMARCH)
 AC_SUBST(DEBARCH)
 AC_SUBST(BUILD)
+AC_DEFINE_UNQUOTED([BUILD], "$BUILD", [Build number])
 
 # jconfig.h is the file we use, but we have another before that to
 # fool autoheader. the reason is that we include this header in our
@@ -180,5 +252,16 @@ AC_SUBST(BUILD)
 # jconfig.h is a minimal version that allows this package to be built
 AC_CONFIG_HEADERS([config.h])
 AC_CONFIG_HEADERS([jconfig.h])
+AC_CONFIG_FILES([pkgscripts/libjpeg-turbo.spec:release/libjpeg-turbo.spec.in])
+AC_CONFIG_FILES([pkgscripts/makecygwinpkg:release/makecygwinpkg.in])
+AC_CONFIG_FILES([pkgscripts/makedpkg:release/makedpkg.in])
+AC_CONFIG_FILES([pkgscripts/deb-control:release/deb-control.in])
+AC_CONFIG_FILES([pkgscripts/makemacpkg:release/makemacpkg.in])
+AC_CONFIG_FILES([pkgscripts/Description.plist:release/Description.plist.in])
+AC_CONFIG_FILES([pkgscripts/Info.plist:release/Info.plist.in])
+AC_CONFIG_FILES([pkgscripts/uninstall:release/uninstall.in])
+AC_CONFIG_FILES([pkgscripts/makesunpkg:release/makesunpkg.in])
+AC_CONFIG_FILES([pkgscripts/pkginfo:release/pkginfo.in])
+AC_CONFIG_FILES([libjpeg.map])
 AC_CONFIG_FILES([Makefile simd/Makefile])
 AC_OUTPUT

djpeg.1

@@ -1,4 +1,4 @@
-.TH DJPEG 1 "22 August 1997"
+.TH DJPEG 1 "11 October 2010"
 .SH NAME
 djpeg \- decompress a JPEG file to an image file
 .SH SYNOPSIS
@@ -243,11 +243,7 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
 To avoid the Unisys LZW patent,
 .B djpeg
 produces uncompressed GIF files.  These are larger than they should be, but
 are readable by standard GIF decoders.
-.PP
-Still not as fast as we'd like.

djpeg.c

@@ -2,6 +2,7 @@
  * djpeg.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -25,6 +26,7 @@
 
 #include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
 #include "jversion.h"		/* for version message */
+#include "config.h"
 
 #include <ctype.h>		/* to declare isprint() */
 
@@ -240,7 +242,10 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       static boolean printed_version = FALSE;
 
       if (! printed_version) {
-	fprintf(stderr, "Independent JPEG Group's DJPEG, version %s\n%s\n",
+	fprintf(stderr, "%s version %s (build %s)\n",
+		PACKAGE_NAME, VERSION, BUILD);
+	fprintf(stderr, "%s\n\n", LJTCOPYRIGHT);
+	fprintf(stderr, "Based on Independent JPEG Group's libjpeg, version %s\n%s\n\n",
 		JVERSION, JCOPYRIGHT);
 	printed_version = TRUE;
       }
@@ -455,7 +460,7 @@ main (int argc, char **argv)
    * APP12 is used by some digital camera makers for textual info,
    * so we provide the ability to display it as text.
    * If you like, additional APPn marker types can be selected for display,
-   * but don't try to override APP0 or APP14 this way (see libjpeg.doc).
+   * but don't try to override APP0 or APP14 this way (see libjpeg.txt).
    */
   jpeg_set_marker_processor(&cinfo, JPEG_COM, print_text_marker);
   jpeg_set_marker_processor(&cinfo, JPEG_APP0+12, print_text_marker);

example.c

@@ -3,7 +3,7 @@
  *
  * This file illustrates how to use the IJG code as a subroutine library
  * to read or write JPEG image files.  You should look at this code in
- * conjunction with the documentation file libjpeg.doc.
+ * conjunction with the documentation file libjpeg.txt.
  *
  * This code will not do anything useful as-is, but it may be helpful as a
  * skeleton for constructing routines that call the JPEG library.  
@@ -196,7 +196,7 @@ write_JPEG_file (char * filename, int quality)
  * files for anything that doesn't fit within the maximum-memory setting.
  * (Note that temp files are NOT needed if you use the default parameters.)
  * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
  *
  * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
  * files to be compatible with everyone else's.  If you cannot readily read
@@ -335,7 +335,7 @@ read_JPEG_file (char * filename)
   /* We can ignore the return value from jpeg_read_header since
    *   (a) suspension is not possible with the stdio data source, and
    *   (b) we passed TRUE to reject a tables-only JPEG file as an error.
-   * See libjpeg.doc for more info.
+   * See libjpeg.txt for more info.
    */
 
   /* Step 4: set parameters for decompression */
@@ -413,14 +413,14 @@ read_JPEG_file (char * filename)
  * In the above code, we ignored the return value of jpeg_read_scanlines,
  * which is the number of scanlines actually read.  We could get away with
  * this because we asked for only one line at a time and we weren't using
- * a suspending data source.  See libjpeg.doc for more info.
+ * a suspending data source.  See libjpeg.txt for more info.
  *
  * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
  * we should have done it beforehand to ensure that the space would be
  * counted against the JPEG max_memory setting.  In some systems the above
  * code would risk an out-of-memory error.  However, in general we don't
  * know the output image dimensions before jpeg_start_decompress(), unless we
- * call jpeg_calc_output_dimensions().  See libjpeg.doc for more about this.
+ * call jpeg_calc_output_dimensions().  See libjpeg.txt for more about this.
  *
  * Scanlines are returned in the same order as they appear in the JPEG file,
  * which is standardly top-to-bottom.  If you must emit data bottom-to-top,
@@ -429,5 +429,5 @@ read_JPEG_file (char * filename)
  *
  * As with compression, some operating modes may require temporary files.
  * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
  */

filelist.txt

@@ -1,6 +1,6 @@
 IJG JPEG LIBRARY:  FILE LIST
 
-Copyright (C) 1994-1998, Thomas G. Lane.
+Copyright (C) 1994-2010, Thomas G. Lane, Guido Vollbeding, D. R. Commander.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -74,8 +74,9 @@ jfdctfst.c	Forward DCT using faster, less accurate integer method.
 jfdctflt.c	Forward DCT using floating-point arithmetic.
 jchuff.c	Huffman entropy coding for sequential JPEG.
 jcphuff.c	Huffman entropy coding for progressive JPEG.
+jcarith.c	Arithmetic entropy coding.
 jcmarker.c	JPEG marker writing.
-jdatadst.c	Data destination manager for stdio output.
+jdatadst.c	Data destination managers for memory and stdio output.
 
 Decompression side of the library:
 
@@ -87,6 +88,7 @@ jdpostct.c	Postprocessor buffer controller.
 jdmarker.c	JPEG marker reading.
 jdhuff.c	Huffman entropy decoding for sequential JPEG.
 jdphuff.c	Huffman entropy decoding for progressive JPEG.
+jdarith.c	Arithmetic entropy decoding.
 jddctmgr.c	IDCT manager (IDCT implementation selection & control).
 jidctint.c	Inverse DCT using slow-but-accurate integer method.
 jidctfst.c	Inverse DCT using faster, less accurate integer method.
@@ -98,10 +100,12 @@ jdmerge.c	Merged upsampling/color conversion (faster, lower quality).
 jquant1.c	One-pass color quantization using a fixed-spacing colormap.
 jquant2.c	Two-pass color quantization using a custom-generated colormap.
 		Also handles one-pass quantization to an externally given map.
-jdatasrc.c	Data source manager for stdio input.
+jdatasrc.c	Data source managers for memory and stdio input.
 
 Support files for both compression and decompression:
 
+jaricom.c	Tables for common use in arithmetic entropy encoding and
+		decoding routines.
 jerror.c	Standard error handling routines (application replaceable).
 jmemmgr.c	System-independent (more or less) memory management code.
 jutils.c	Miscellaneous utility routines.
@@ -118,7 +122,7 @@ jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
 jmemmac.c	Custom implementation for Apple Macintosh.
 
 Exactly one of the system-dependent modules should be configured into an
-installed JPEG library (see install.doc for hints about which one to use).
+installed JPEG library (see install.txt for hints about which one to use).
 On unusual systems you may find it worthwhile to make a special
 system-dependent memory manager.
 
@@ -184,27 +188,27 @@ ADDITIONAL FILES
 Documentation (see README for a guide to the documentation files):
 
 README		Master documentation file.
-*.doc		Other documentation files.
+*.txt		Other documentation files.
 *.1		Documentation in Unix man page format.
 change.log	Version-to-version change highlights.
 example.c	Sample code for calling JPEG library.
 
-Configuration/installation files and programs (see install.doc for more info):
+Configuration/installation files and programs (see install.txt for more info):
 
 configure	Unix shell script to perform automatic configuration.
-ltconfig	Support scripts for configure (from GNU libtool).
-ltmain.sh
+configure.ac	Source file for use with Autoconf to generate configure.
+ltmain.sh	Support scripts for configure (from GNU libtool).
 config.guess
 config.sub
+depcomp
+missing
 install-sh	Install shell script for those Unix systems lacking one.
-ckconfig.c	Program to generate jconfig.h on non-Unix systems.
-jconfig.doc	Template for making jconfig.h by hand.
-makefile.*	Sample makefiles for particular systems.
-jconfig.*	Sample jconfig.h for particular systems.
-ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
-		L. Peter Deutsch and Aladdin Enterprises).
+Makefile.in	Makefile input for configure.
+Makefile.am	Source file for use with Automake to generate Makefile.in.
+jconfig.txt	Template for making jconfig.h by hand.
+aclocal.m4	M4 macro definitions for use with Autoconf.
 
-Test files (see install.doc for test procedure):
+Test files (see install.txt for test procedure):
 
 test*.*		Source and comparison files for confidence test.
 		These are binary image files, NOT text files.

install.txt

@@ -1,6 +1,6 @@
 INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
 
-Copyright (C) 1991-1998, Thomas G. Lane.
+Copyright (C) 1991-2010, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -94,18 +94,13 @@ Configure was created with GNU Autoconf and it follows the usual conventions
 for GNU configure scripts.  It makes a few assumptions that you may want to
 override.  You can do this by providing optional switches to configure:
 
-* If you want to build libjpeg as a shared library, say
-	./configure --enable-shared
-To get both shared and static libraries, say
-	./configure --enable-shared --enable-static
-Note that these switches invoke GNU libtool to take care of system-dependent
-shared library building methods.  If things don't work this way, please try
-running configure without either switch; that should build a static library
-without using libtool.  If that works, your problem is probably with libtool
-not with the IJG code.  libtool is fairly new and doesn't support all flavors
-of Unix yet.  (You might be able to find a newer version of libtool than the
-one included with libjpeg; see ftp.gnu.org.  Report libtool problems to
-bug-libtool@gnu.org.)
+* Configure will build both static and shared libraries, if possible.
+If you want to build libjpeg only as a static library, say
+	./configure --disable-shared
+If you want to build libjpeg only as a shared library, say
+	./configure --disable-static
+Configure uses GNU libtool to take care of system-dependent shared library
+building methods.
 
 * Configure will use gcc (GNU C compiler) if it's available, otherwise cc.
 To force a particular compiler to be selected, use the CC option, for example
@@ -115,10 +110,10 @@ For example, on HP-UX you probably want to say
 	./configure CC='cc -Aa'
 to get HP's compiler to run in ANSI mode.
 
-* The default CFLAGS setting is "-O" for non-gcc compilers, "-O2" for gcc.
+* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc.
 You can override this by saying, for example,
-	./configure CFLAGS='-g'
-if you want to compile with debugging support.
+	./configure CFLAGS='-O2'
+if you want to compile without debugging support.
 
 * Configure will set up the makefile so that "make install" will install files
 into /usr/local/bin, /usr/local/man, etc.  You can specify an installation
@@ -153,7 +148,8 @@ makefile.dj	jconfig.dj	MS-DOS, DJGPP (Delorie's port of GNU C)
 makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C (16-bit only)
 makefile.wat	jconfig.wat	MS-DOS, OS/2, or Windows NT, Watcom C
 makefile.vc	jconfig.vc	Windows NT/95, MS Visual C++
-make*.ds	jconfig.vc	Windows NT/95, MS Developer Studio
+make*.vc6	jconfig.vc	Windows NT/95, MS Visual C++ 6
+make*.v10	jconfig.vc	Windows NT/95, MS Visual C++ 2010 (v10)
 makefile.mms	jconfig.vms	Digital VMS, with MMS software
 makefile.vms	jconfig.vms	Digital VMS, without MMS software
 
@@ -166,8 +162,8 @@ Configuring the software by hand
 --------------------------------
 
 First, generate a jconfig.h file.  If you are moderately familiar with C,
-the comments in jconfig.doc should be enough information to do this; just
-copy jconfig.doc to jconfig.h and edit it appropriately.  Otherwise, you may
+the comments in jconfig.txt should be enough information to do this; just
+copy jconfig.txt to jconfig.h and edit it appropriately.  Otherwise, you may
 prefer to use the ckconfig.c program.  You will need to compile and execute
 ckconfig.c by hand --- we hope you know at least enough to do that.
 ckconfig.c may not compile the first try (in fact, the whole idea is for it
@@ -447,8 +443,8 @@ on our to-do list.)
 
 The PPM reader (rdppm.c) can read 12-bit data from either text-format or
 binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
-maxval greater than 255 are assumed to use 2 bytes per sample, LSB first
-(little-endian order).  As of early 1995, 2-byte binary format is not
+maxval greater than 255 are assumed to use 2 bytes per sample, MSB first
+(big-endian order).  As of early 1995, 2-byte binary format is not
 officially supported by the PBMPLUS library, but it is expected that a
 future release of PBMPLUS will support it.  Note that the PPM reader will
 read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
@@ -521,7 +517,7 @@ that float DCT results may vary slightly across machines.)  To do that, add
 "#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h.  Even if you don't change
 the default, you should redefine JDCT_FASTEST, which is the method selected
 by djpeg's -fast switch.  Don't forget to update the documentation files
-(usage.doc and/or cjpeg.1, djpeg.1) to agree with what you've done.
+(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done.
 
 If access to "short" arrays is slow on your machine, it may be a win to
 define type JCOEF as int rather than short.  This will cost a good deal of
@@ -538,17 +534,17 @@ In general, it's worth trying the maximum optimization level of your compiler,
 and experimenting with any optional optimizations such as loop unrolling.
 (Unfortunately, far too many compilers have optimizer bugs ... be prepared to
 back off if the code fails self-test.)  If you do any experimentation along
-these lines, please report the optimal settings to jpeg-info@uunet.uu.net so
-we can mention them in future releases.  Be sure to specify your machine and
-compiler version.
+these lines, please report the optimal settings to jpeg-info@uc.ag so we
+can mention them in future releases.  Be sure to specify your machine
+and compiler version.
 
 
 HINTS FOR SPECIFIC SYSTEMS
 ==========================
 
 We welcome reports on changes needed for systems not mentioned here.  Submit
-'em to jpeg-info@uunet.uu.net.  Also, if configure or ckconfig.c is wrong
-about how to configure the JPEG software for your system, please let us know.
+'em to jpeg-info@uc.ag.  Also, if configure or ckconfig.c is wrong about how
+to configure the JPEG software for your system, please let us know.
 
 
 Acorn RISC OS:
@@ -568,7 +564,7 @@ Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'.  Remove the
 lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h'
 dependency section.
 
-Copy jconfig.doc to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
+Copy jconfig.txt to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
 and CHAR_IS_UNSIGNED.
 
 Run the makefile using !AMU not !Make.  If you want to use the 'clean' and
@@ -587,7 +583,7 @@ manager, with temporary files being created on the device named by
 
 
 Atari ST/STE/TT:
- 
+
 Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st
 to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively.  The
 project files should work as-is with Pure C.  For Turbo C, change library
@@ -610,7 +606,8 @@ or jpegtran.ttp.  You'll have to perform the self-test by hand.
 
 We haven't bothered to include project files for rdjpgcom and wrjpgcom.
 Those source files should just be compiled by themselves; they don't
-depend on the JPEG library.
+depend on the JPEG library.  You can use the default.prj project file
+of the Pure C distribution to make the programs.
 
 There is a bug in some older versions of the Turbo C library which causes the
 space used by temporary files created with "tmpfile()" not to be freed after
@@ -872,6 +869,7 @@ Since jmorecfg.h tries to define FAR as empty, you may get a compiler
 warning if you include both jpeglib.h and windef.h (which windows.h
 includes).  To suppress the warning, you can put "#ifndef FAR"/"#endif"
 around the line "#define FAR" in jmorecfg.h.
+(Something like this is already in jmorecfg.h, by the way.)
 
 When using the library in a Windows application, you will almost certainly
 want to modify or replace the error handler module jerror.c, since our
@@ -890,7 +888,7 @@ jconfig.h to enable it.)
 
 The proper solution for problem 2 is to return control to your calling
 application after a library error.  This can be done with the setjmp/longjmp
-technique discussed in libjpeg.doc and illustrated in example.c.  (NOTE:
+technique discussed in libjpeg.txt and illustrated in example.c.  (NOTE:
 some older Windows C compilers provide versions of setjmp/longjmp that
 don't actually work under Windows.  You may need to use the Windows system
 functions Catch and Throw instead.)
@@ -1000,32 +998,67 @@ model.  makefile.vc is intended for command-line use.  (If you are using
 the Developer Studio environment, you may prefer the DevStudio project
 files; see below.)
 
-Some users feel that it's easier to call the library from C++ code if you
-force VC++ to treat the library as C++ code, which you can do by renaming
-all the *.c files to *.cpp (and adjusting the makefile to match).  This
-avoids the need to put extern "C" { ... } around #include "jpeglib.h" in
-your C++ application.
+IJG JPEG 7 adds extern "C" to jpeglib.h.  This avoids the need to put
+extern "C" { ... } around #include "jpeglib.h" in your C++ application.
+You can also force VC++ to treat the library as C++ code by renaming
+all the *.c files to *.cpp (and adjusting the makefile to match).
+In this case you also need to define the symbol DONT_USE_EXTERN_C in
+the configuration to prevent jpeglib.h from using extern "C".
 
 
-Microsoft Windows, Microsoft Developer Studio:
+Microsoft Windows, Microsoft Visual C++ 6 Developer Studio:
 
-We include makefiles that should work as project files in DevStudio 4.2 or
+We include makefiles that should work as project files in DevStudio 6.0 or
 later.  There is a library makefile that builds the IJG library as a static
-Win32 library, and an application makefile that builds the sample applications
+Win32 library, and application makefiles that build the sample applications
 as Win32 console applications.  (Even if you only want the library, we
 recommend building the applications so that you can run the self-test.)
 
 To use:
-1. Copy jconfig.vc to jconfig.h, makelib.ds to jpeg.mak, and
-   makeapps.ds to apps.mak.  (Note that the renaming is critical!)
-2. Click on the .mak files to construct project workspaces.
-   (If you are using DevStudio more recent than 4.2, you'll probably
-   get a message saying that the makefiles are being updated.)
-3. Build the library project, then the applications project.
-4. Move the application .exe files from `app`\Release to an
+1. Open the command prompt, change to the main directory and execute the
+   command line
+	NMAKE /f makefile.vc  setup-vc6
+   This will move jconfig.vc to jconfig.h and makefiles to project files.
+   (Note that the renaming is critical!)
+2. Open the workspace file jpeg.dsw, build the library project.
+   (If you are using DevStudio more recent than 6.0, you'll probably
+   get a message saying that the project files are being updated.)
+3. Open the workspace file apps.dsw, build the application projects.
+4. To perform the self-test, execute the command line
+	NMAKE /f makefile.vc  test-build
+5. Move the application .exe files from `app`\Release to an
    appropriate location on your path.
-5. To perform the self-test, execute the command line
-	NMAKE /f makefile.vc  test
+
+
+Microsoft Windows, Microsoft Visual C++ 2010 Developer Studio (v10):
+
+We include makefiles that should work as project files in Visual Studio
+2010 or later.  There is a library makefile that builds the IJG library
+as a static Win32 library, and application makefiles that build the sample
+applications as Win32 console applications.  (Even if you only want the
+library, we recommend building the applications so that you can run the
+self-test.)
+
+To use:
+1. Open the command prompt, change to the main directory and execute the
+   command line
+	NMAKE /f makefile.vc  setup-v10
+   This will move jconfig.vc to jconfig.h and makefiles to project files.
+   (Note that the renaming is critical!)
+2. Open the solution file jpeg.sln, build the library project.
+   (If you are using Visual Studio more recent than 2010 (v10), you'll
+   probably get a message saying that the project files are being updated.)
+3. Open the solution file apps.sln, build the application projects.
+4. To perform the self-test, execute the command line
+	NMAKE /f makefile.vc  test-build
+5. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
+
+Note:
+There seems to be an optimization bug in the compiler which causes the
+self-test to fail with the color quantization option.
+We have disabled optimization for the file jquant2.c in the library
+project file which causes the self-test to pass properly.
 
 
 OS/2, Borland C++:

jaricom.c

@@ -0,0 +1,153 @@
+/*
+ * jaricom.c
+ *
+ * Developed 1997-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains probability estimation tables for common use in
+ * arithmetic entropy encoding and decoding routines.
+ *
+ * This data represents Table D.2 in the JPEG spec (ISO/IEC IS 10918-1
+ * and CCITT Recommendation ITU-T T.81) and Table 24 in the JBIG spec
+ * (ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+/* The following #define specifies the packing of the four components
+ * into the compact INT32 representation.
+ * Note that this formula must match the actual arithmetic encoder
+ * and decoder implementation.  The implementation has to be changed
+ * if this formula is changed.
+ * The current organization is leaned on Markus Kuhn's JBIG
+ * implementation (jbig_tab.c).
+ */
+
+#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b)
+
+const INT32 jpeg_aritab[113+1] = {
+/*
+ * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS
+ */
+  V(   0, 0x5a1d,   1,   1, 1 ),
+  V(   1, 0x2586,  14,   2, 0 ),
+  V(   2, 0x1114,  16,   3, 0 ),
+  V(   3, 0x080b,  18,   4, 0 ),
+  V(   4, 0x03d8,  20,   5, 0 ),
+  V(   5, 0x01da,  23,   6, 0 ),
+  V(   6, 0x00e5,  25,   7, 0 ),
+  V(   7, 0x006f,  28,   8, 0 ),
+  V(   8, 0x0036,  30,   9, 0 ),
+  V(   9, 0x001a,  33,  10, 0 ),
+  V(  10, 0x000d,  35,  11, 0 ),
+  V(  11, 0x0006,   9,  12, 0 ),
+  V(  12, 0x0003,  10,  13, 0 ),
+  V(  13, 0x0001,  12,  13, 0 ),
+  V(  14, 0x5a7f,  15,  15, 1 ),
+  V(  15, 0x3f25,  36,  16, 0 ),
+  V(  16, 0x2cf2,  38,  17, 0 ),
+  V(  17, 0x207c,  39,  18, 0 ),
+  V(  18, 0x17b9,  40,  19, 0 ),
+  V(  19, 0x1182,  42,  20, 0 ),
+  V(  20, 0x0cef,  43,  21, 0 ),
+  V(  21, 0x09a1,  45,  22, 0 ),
+  V(  22, 0x072f,  46,  23, 0 ),
+  V(  23, 0x055c,  48,  24, 0 ),
+  V(  24, 0x0406,  49,  25, 0 ),
+  V(  25, 0x0303,  51,  26, 0 ),
+  V(  26, 0x0240,  52,  27, 0 ),
+  V(  27, 0x01b1,  54,  28, 0 ),
+  V(  28, 0x0144,  56,  29, 0 ),
+  V(  29, 0x00f5,  57,  30, 0 ),
+  V(  30, 0x00b7,  59,  31, 0 ),
+  V(  31, 0x008a,  60,  32, 0 ),
+  V(  32, 0x0068,  62,  33, 0 ),
+  V(  33, 0x004e,  63,  34, 0 ),
+  V(  34, 0x003b,  32,  35, 0 ),
+  V(  35, 0x002c,  33,   9, 0 ),
+  V(  36, 0x5ae1,  37,  37, 1 ),
+  V(  37, 0x484c,  64,  38, 0 ),
+  V(  38, 0x3a0d,  65,  39, 0 ),
+  V(  39, 0x2ef1,  67,  40, 0 ),
+  V(  40, 0x261f,  68,  41, 0 ),
+  V(  41, 0x1f33,  69,  42, 0 ),
+  V(  42, 0x19a8,  70,  43, 0 ),
+  V(  43, 0x1518,  72,  44, 0 ),
+  V(  44, 0x1177,  73,  45, 0 ),
+  V(  45, 0x0e74,  74,  46, 0 ),
+  V(  46, 0x0bfb,  75,  47, 0 ),
+  V(  47, 0x09f8,  77,  48, 0 ),
+  V(  48, 0x0861,  78,  49, 0 ),
+  V(  49, 0x0706,  79,  50, 0 ),
+  V(  50, 0x05cd,  48,  51, 0 ),
+  V(  51, 0x04de,  50,  52, 0 ),
+  V(  52, 0x040f,  50,  53, 0 ),
+  V(  53, 0x0363,  51,  54, 0 ),
+  V(  54, 0x02d4,  52,  55, 0 ),
+  V(  55, 0x025c,  53,  56, 0 ),
+  V(  56, 0x01f8,  54,  57, 0 ),
+  V(  57, 0x01a4,  55,  58, 0 ),
+  V(  58, 0x0160,  56,  59, 0 ),
+  V(  59, 0x0125,  57,  60, 0 ),
+  V(  60, 0x00f6,  58,  61, 0 ),
+  V(  61, 0x00cb,  59,  62, 0 ),
+  V(  62, 0x00ab,  61,  63, 0 ),
+  V(  63, 0x008f,  61,  32, 0 ),
+  V(  64, 0x5b12,  65,  65, 1 ),
+  V(  65, 0x4d04,  80,  66, 0 ),
+  V(  66, 0x412c,  81,  67, 0 ),
+  V(  67, 0x37d8,  82,  68, 0 ),
+  V(  68, 0x2fe8,  83,  69, 0 ),
+  V(  69, 0x293c,  84,  70, 0 ),
+  V(  70, 0x2379,  86,  71, 0 ),
+  V(  71, 0x1edf,  87,  72, 0 ),
+  V(  72, 0x1aa9,  87,  73, 0 ),
+  V(  73, 0x174e,  72,  74, 0 ),
+  V(  74, 0x1424,  72,  75, 0 ),
+  V(  75, 0x119c,  74,  76, 0 ),
+  V(  76, 0x0f6b,  74,  77, 0 ),
+  V(  77, 0x0d51,  75,  78, 0 ),
+  V(  78, 0x0bb6,  77,  79, 0 ),
+  V(  79, 0x0a40,  77,  48, 0 ),
+  V(  80, 0x5832,  80,  81, 1 ),
+  V(  81, 0x4d1c,  88,  82, 0 ),
+  V(  82, 0x438e,  89,  83, 0 ),
+  V(  83, 0x3bdd,  90,  84, 0 ),
+  V(  84, 0x34ee,  91,  85, 0 ),
+  V(  85, 0x2eae,  92,  86, 0 ),
+  V(  86, 0x299a,  93,  87, 0 ),
+  V(  87, 0x2516,  86,  71, 0 ),
+  V(  88, 0x5570,  88,  89, 1 ),
+  V(  89, 0x4ca9,  95,  90, 0 ),
+  V(  90, 0x44d9,  96,  91, 0 ),
+  V(  91, 0x3e22,  97,  92, 0 ),
+  V(  92, 0x3824,  99,  93, 0 ),
+  V(  93, 0x32b4,  99,  94, 0 ),
+  V(  94, 0x2e17,  93,  86, 0 ),
+  V(  95, 0x56a8,  95,  96, 1 ),
+  V(  96, 0x4f46, 101,  97, 0 ),
+  V(  97, 0x47e5, 102,  98, 0 ),
+  V(  98, 0x41cf, 103,  99, 0 ),
+  V(  99, 0x3c3d, 104, 100, 0 ),
+  V( 100, 0x375e,  99,  93, 0 ),
+  V( 101, 0x5231, 105, 102, 0 ),
+  V( 102, 0x4c0f, 106, 103, 0 ),
+  V( 103, 0x4639, 107, 104, 0 ),
+  V( 104, 0x415e, 103,  99, 0 ),
+  V( 105, 0x5627, 105, 106, 1 ),
+  V( 106, 0x50e7, 108, 107, 0 ),
+  V( 107, 0x4b85, 109, 103, 0 ),
+  V( 108, 0x5597, 110, 109, 0 ),
+  V( 109, 0x504f, 111, 107, 0 ),
+  V( 110, 0x5a10, 110, 111, 1 ),
+  V( 111, 0x5522, 112, 109, 0 ),
+  V( 112, 0x59eb, 112, 111, 1 ),
+/*
+ * This last entry is used for fixed probability estimate of 0.5
+ * as recommended in Section 10.3 Table 5 of ITU-T Rec. T.851.
+ */
+  V( 113, 0x5a1d, 113, 113, 0 )
+};

jcapimin.c

@@ -2,6 +2,7 @@
  * jcapimin.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2003-2010 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -63,14 +64,25 @@ jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
 
   cinfo->comp_info = NULL;
 
-  for (i = 0; i < NUM_QUANT_TBLS; i++)
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
     cinfo->quant_tbl_ptrs[i] = NULL;
+#if JPEG_LIB_VERSION >= 70
+    cinfo->q_scale_factor[i] = 100;
+#endif
+  }
 
   for (i = 0; i < NUM_HUFF_TBLS; i++) {
     cinfo->dc_huff_tbl_ptrs[i] = NULL;
     cinfo->ac_huff_tbl_ptrs[i] = NULL;
   }
 
+#if JPEG_LIB_VERSION >= 80
+  /* Must do it here for emit_dqt in case jpeg_write_tables is used */
+  cinfo->block_size = DCTSIZE;
+  cinfo->natural_order = jpeg_natural_order;
+  cinfo->lim_Se = DCTSIZE2-1;
+#endif
+
   cinfo->script_space = NULL;
 
   cinfo->input_gamma = 1.0;	/* in case application forgets */

jcarith.c

@@ -0,0 +1,925 @@
+/*
+ * jcarith.c
+ *
+ * Developed 1997-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy encoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy encoder object for arithmetic encoding. */
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */
+  INT32 a;               /* A register, normalized size of coding interval */
+  INT32 sc;        /* counter for stacked 0xFF values which might overflow */
+  INT32 zc;          /* counter for pending 0x00 output values which might *
+                          * be discarded at the end ("Pacman" termination) */
+  int ct;  /* bit shift counter, determines when next byte will be written */
+  int buffer;                /* buffer for most recent output byte != 0xFF */
+
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+  int next_restart_num;		/* next restart number to write (0-7) */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_encoder;
+
+typedef arith_entropy_encoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+/* NOTE: Uncomment the following #define if you want to use the
+ * given formula for calculating the AC conditioning parameter Kx
+ * for spectral selection progressive coding in section G.1.3.2
+ * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4).
+ * Although the spec and P&M authors claim that this "has proven
+ * to give good results for 8 bit precision samples", I'm not
+ * convinced yet that this is really beneficial.
+ * Early tests gave only very marginal compression enhancements
+ * (a few - around 5 or so - bytes even for very large files),
+ * which would turn out rather negative if we'd suppress the
+ * DAC (Define Arithmetic Conditioning) marker segments for
+ * the default parameters in the future.
+ * Note that currently the marker writing module emits 12-byte
+ * DAC segments for a full-component scan in a color image.
+ * This is not worth worrying about IMHO. However, since the
+ * spec defines the default values to be used if the tables
+ * are omitted (unlike Huffman tables, which are required
+ * anyway), one might optimize this behaviour in the future,
+ * and then it would be disadvantageous to use custom tables if
+ * they don't provide sufficient gain to exceed the DAC size.
+ *
+ * On the other hand, I'd consider it as a reasonable result
+ * that the conditioning has no significant influence on the
+ * compression performance. This means that the basic
+ * statistical model is already rather stable.
+ *
+ * Thus, at the moment, we use the default conditioning values
+ * anyway, and do not use the custom formula.
+ *
+#define CALCULATE_SPECTRAL_CONDITIONING
+ */
+
+/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
+ * We assume that int right shift is unsigned if INT32 right shift is,
+ * which should be safe.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	int ishift_temp;
+#define IRIGHT_SHIFT(x,shft)  \
+	((ishift_temp = (x)) < 0 ? \
+	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
+	 (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+
+LOCAL(void)
+emit_byte (int val, j_compress_ptr cinfo)
+/* Write next output byte; we do not support suspension in this module. */
+{
+  struct jpeg_destination_mgr * dest = cinfo->dest;
+
+  *dest->next_output_byte++ = (JOCTET) val;
+  if (--dest->free_in_buffer == 0)
+    if (! (*dest->empty_output_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+}
+
+
+/*
+ * Finish up at the end of an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  INT32 temp;
+
+  /* Section D.1.8: Termination of encoding */
+
+  /* Find the e->c in the coding interval with the largest
+   * number of trailing zero bits */
+  if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c)
+    e->c = temp + 0x8000L;
+  else
+    e->c = temp;
+  /* Send remaining bytes to output */
+  e->c <<= e->ct;
+  if (e->c & 0xF8000000L) {
+    /* One final overflow has to be handled */
+    if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer + 1, cinfo);
+      if (e->buffer + 1 == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+    e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+    e->sc = 0;
+  } else {
+    if (e->buffer == 0)
+      ++e->zc;
+    else if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer, cinfo);
+    }
+    if (e->sc) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      do {
+	emit_byte(0xFF, cinfo);
+	emit_byte(0x00, cinfo);
+      } while (--e->sc);
+    }
+  }
+  /* Output final bytes only if they are not 0x00 */
+  if (e->c & 0x7FFF800L) {
+    if (e->zc)  /* output final pending zero bytes */
+      do emit_byte(0x00, cinfo);
+      while (--e->zc);
+    emit_byte((e->c >> 19) & 0xFF, cinfo);
+    if (((e->c >> 19) & 0xFF) == 0xFF)
+      emit_byte(0x00, cinfo);
+    if (e->c & 0x7F800L) {
+      emit_byte((e->c >> 11) & 0xFF, cinfo);
+      if (((e->c >> 11) & 0xFF) == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+  }
+}
+
+
+/*
+ * The core arithmetic encoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Parameter 'val' to be encoded may be 0 or 1 (binary decision).
+ *
+ * Note: I've added full "Pacman" termination support to the
+ * byte output routines, which is equivalent to the optional
+ * Discard_final_zeros procedure (Figure D.15) in the spec.
+ * Thus, we always produce the shortest possible output
+ * stream compliant to the spec (no trailing zero bytes,
+ * except for FF stuffing).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(void)
+arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) 
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv;
+
+  /* Fetch values from our compact representation of Table D.2:
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Encode & estimation procedures per sections D.1.4 & D.1.5 */
+  e->a -= qe;
+  if (val != (sv >> 7)) {
+    /* Encode the less probable symbol */
+    if (e->a >= qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency, otherwise code the LPS
+       * as usual: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+  } else {
+    /* Encode the more probable symbol */
+    if (e->a >= 0x8000L)
+      return;  /* A >= 0x8000 -> ready, no renormalization required */
+    if (e->a < qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+  }
+
+  /* Renormalization & data output per section D.1.6 */
+  do {
+    e->a <<= 1;
+    e->c <<= 1;
+    if (--e->ct == 0) {
+      /* Another byte is ready for output */
+      temp = e->c >> 19;
+      if (temp > 0xFF) {
+	/* Handle overflow over all stacked 0xFF bytes */
+	if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer + 1, cinfo);
+	  if (e->buffer + 1 == 0xFF)
+	    emit_byte(0x00, cinfo);
+	}
+	e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+	e->sc = 0;
+	/* Note: The 3 spacer bits in the C register guarantee
+	 * that the new buffer byte can't be 0xFF here
+	 * (see page 160 in the P&M JPEG book). */
+	e->buffer = temp & 0xFF;  /* new output byte, might overflow later */
+      } else if (temp == 0xFF) {
+	++e->sc;  /* stack 0xFF byte (which might overflow later) */
+      } else {
+	/* Output all stacked 0xFF bytes, they will not overflow any more */
+	if (e->buffer == 0)
+	  ++e->zc;
+	else if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer, cinfo);
+	}
+	if (e->sc) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  do {
+	    emit_byte(0xFF, cinfo);
+	    emit_byte(0x00, cinfo);
+	  } while (--e->sc);
+	}
+	e->buffer = temp & 0xFF;  /* new output byte (can still overflow) */
+      }
+      e->c &= 0x7FFFFL;
+      e->ct += 8;
+    }
+  } while (e->a < 0x8000L);
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(void)
+emit_restart (j_compress_ptr cinfo, int restart_num)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  finish_pass(cinfo);
+
+  emit_byte(0xFF, cinfo);
+  emit_byte(JPEG_RST0 + restart_num, cinfo);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->progressive_mode == 0 || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->progressive_mode == 0 || cinfo->Se) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+}
+
+
+/*
+ * MCU encoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl;
+  int v, v2, m;
+  ISHIFT_TEMPS
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Compute the DC value after the required point transform by Al.
+     * This is simply an arithmetic right shift.
+     */
+    m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al);
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = m - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = m;
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke;
+  int v, v2, m;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  for (ke = cinfo->Se; ke > 0; ke--)
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[jpeg_natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+
+  /* Figure F.5: Encode_AC_Coefficients */
+  for (k = cinfo->Ss; k <= ke; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 0);		/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[jpeg_natural_order[k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 0);
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 1);
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+    }
+    st += 2;
+    /* Figure F.8: Encoding the magnitude category of v */
+    m = 0;
+    if (v -= 1) {
+      arith_encode(cinfo, st, 1);
+      m = 1;
+      v2 = v;
+      if (v2 >>= 1) {
+	arith_encode(cinfo, st, 1);
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+    }
+    arith_encode(cinfo, st, 0);
+    /* Figure F.9: Encoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      arith_encode(cinfo, st, (m & v) ? 1 : 0);
+  }
+  /* Encode EOB decision only if k <= cinfo->Se */
+  if (k <= cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for DC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int Al, blkn;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  Al = cinfo->Al;
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* We simply emit the Al'th bit of the DC coefficient value. */
+    arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke, kex;
+  int v;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Section G.1.3.3: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  for (ke = cinfo->Se; ke > 0; ke--)
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[jpeg_natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  for (kex = ke; kex > 0; kex--)
+    if ((v = (*block)[jpeg_natural_order[kex]]) >= 0) {
+      if (v >>= cinfo->Ah) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Ah) break;
+    }
+
+  /* Figure G.10: Encode_AC_Coefficients_SA */
+  for (k = cinfo->Ss; k <= ke; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (k > kex)
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[jpeg_natural_order[k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 0);
+	  }
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 1);
+	  }
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0); st += 3; k++;
+    }
+  }
+  /* Encode EOB decision only if k <= cinfo->Se */
+  if (k <= cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  jpeg_component_info * compptr;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, k, ke;
+  int v, v2, m;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = (*block)[0];
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+
+    /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+    tbl = compptr->ac_tbl_no;
+
+    /* Establish EOB (end-of-block) index */
+    for (ke = DCTSIZE2 - 1; ke > 0; ke--)
+      if ((*block)[jpeg_natural_order[ke]]) break;
+
+    /* Figure F.5: Encode_AC_Coefficients */
+    for (k = 1; k <= ke; k++) {
+      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+      while ((v = (*block)[jpeg_natural_order[k]]) == 0) {
+	arith_encode(cinfo, st + 1, 0); st += 3; k++;
+      }
+      arith_encode(cinfo, st + 1, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, entropy->fixed_bin, 0);
+      } else {
+	v = -v;
+	arith_encode(cinfo, entropy->fixed_bin, 1);
+      }
+      st += 2;
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	if (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (v2 >>= 1) {
+	    arith_encode(cinfo, st, 1);
+	    m <<= 1;
+	    st += 1;
+	  }
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+    /* Encode EOB decision only if k <= DCTSIZE2 - 1 */
+    if (k <= DCTSIZE2 - 1) {
+      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+      arith_encode(cinfo, st, 1);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_compress_ptr cinfo, boolean gather_statistics)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (gather_statistics)
+    /* Make sure to avoid that in the master control logic!
+     * We are fully adaptive here and need no extra
+     * statistics gathering pass!
+     */
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+
+  /* We assume jcmaster.c already validated the progressive scan parameters. */
+
+  /* Select execution routines */
+  if (cinfo->progressive_mode) {
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_first;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_refine;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_refine;
+    }
+  } else
+    entropy->pub.encode_mcu = encode_mcu;
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->progressive_mode == 0 || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->progressive_mode == 0 || cinfo->Se) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+#ifdef CALCULATE_SPECTRAL_CONDITIONING
+      if (cinfo->progressive_mode)
+	/* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */
+	cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4);
+#endif
+    }
+  }
+
+  /* Initialize arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_arith_encoder (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_encoder));
+  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  entropy->pub.start_pass = start_pass;
+  entropy->pub.finish_pass = finish_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+}

jccolor.c

@@ -3,7 +3,7 @@
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
  * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
- * Copyright 2009 D. R. Commander
+ * Copyright 2009-2011 D. R. Commander
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -83,7 +83,7 @@ typedef my_color_converter * my_cconvert_ptr;
 
 #if BITS_IN_JSAMPLE == 8
 
-const unsigned char red_lut[256] = {
+static const unsigned char red_lut[256] = {
   0 , 0 , 1 , 1 , 1 , 1 , 2 , 2 , 2 , 3 , 3 , 3 , 4 , 4 , 4 , 4 ,
   5 , 5 , 5 , 6 , 6 , 6 , 7 , 7 , 7 , 7 , 8 , 8 , 8 , 9 , 9 , 9 ,
   10, 10, 10, 10, 11, 11, 11, 12, 12, 12, 13, 13, 13, 13, 14, 14,
@@ -102,7 +102,7 @@ const unsigned char red_lut[256] = {
   72, 72, 72, 73, 73, 73, 74, 74, 74, 74, 75, 75, 75, 76, 76, 76
 };
 
-const unsigned char green_lut[256] = {
+static const unsigned char green_lut[256] = {
   0  , 1  , 1  , 2  , 2  , 3  , 4  , 4  , 5  , 5  , 6  , 6  ,
   7  , 8  , 8  , 9  , 9  , 10 , 11 , 11 , 12 , 12 , 13 , 14 ,
   14 , 15 , 15 , 16 , 16 , 17 , 18 , 18 , 19 , 19 , 20 , 21 ,
@@ -122,12 +122,12 @@ const unsigned char green_lut[256] = {
   113, 113, 114, 114, 115, 116, 116, 117, 117, 118, 119, 119,
   120, 120, 121, 122, 122, 123, 123, 124, 124, 125, 126, 126,
   127, 127, 128, 129, 129, 130, 130, 131, 131, 132, 133, 133,
-  34, 134, 135, 136, 136, 137, 137, 138, 139, 139, 140, 140,
+  134, 134, 135, 136, 136, 137, 137, 138, 139, 139, 140, 140,
   141, 141, 142, 143, 143, 144, 144, 145, 146, 146, 147, 147,
   148, 149, 149, 150
 };
 
-const unsigned char blue_lut[256] = {
+static const unsigned char blue_lut[256] = {
   0 , 0 , 0 , 0 , 0 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 2 , 2 ,
   2 , 2 , 2 , 2 , 2 , 2 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 4 ,
   4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 5 , 5 , 5 , 5 , 5 , 5 , 5 , 5 ,
@@ -258,14 +258,13 @@ rgb_gray_convert (j_compress_ptr cinfo,
 		  JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
 		  JDIMENSION output_row, int num_rows)
 {
-  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
   #if BITS_IN_JSAMPLE != 8
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
   register INT32 * ctab = cconvert->rgb_ycc_tab;
   #endif
   register JSAMPROW inptr;
   register JSAMPROW outptr;
   JSAMPLE *maxoutptr;
-  register JDIMENSION col;
   JDIMENSION num_cols = cinfo->image_width;
   int rindex = rgb_red[cinfo->in_color_space];
   int gindex = rgb_green[cinfo->in_color_space];

jcdctmgr.c

@@ -4,6 +4,7 @@
  * Copyright (C) 1994-1996, Thomas G. Lane.
  * Copyright (C) 1999-2006, MIYASAKA Masaru.
  * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2011 D. R. Commander
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,6 +40,8 @@ typedef JMETHOD(void, float_quantize_method_ptr,
                 (JCOEFPTR coef_block, FAST_FLOAT * divisors,
                  FAST_FLOAT * workspace));
 
+METHODDEF(void) quantize (JCOEFPTR, DCTELEM *, DCTELEM *);
+
 typedef struct {
   struct jpeg_forward_dct pub;	/* public fields */
 
@@ -160,7 +163,7 @@ flss (UINT16 val)
  * of in a consecutive manner, yet again in order to allow SIMD
  * routines.
  */
-LOCAL(void)
+LOCAL(int)
 compute_reciprocal (UINT16 divisor, DCTELEM * dtbl)
 {
   UDCTELEM2 fq, fr;
@@ -189,6 +192,9 @@ compute_reciprocal (UINT16 divisor, DCTELEM * dtbl)
   dtbl[DCTSIZE2 * 1] = (DCTELEM) c;       /* correction + roundfactor */
   dtbl[DCTSIZE2 * 2] = (DCTELEM) (1 << (sizeof(DCTELEM)*8*2 - r));  /* scale */
   dtbl[DCTSIZE2 * 3] = (DCTELEM) r - sizeof(DCTELEM)*8; /* shift */
+
+  if(r <= 16) return 0;
+  else return 1;
 }
 
 /*
@@ -232,7 +238,9 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
       }
       dtbl = fdct->divisors[qtblno];
       for (i = 0; i < DCTSIZE2; i++) {
-	compute_reciprocal(qtbl->quantval[i] << 3, &dtbl[i]);
+	if(!compute_reciprocal(qtbl->quantval[i] << 3, &dtbl[i])
+	  && fdct->quantize == jsimd_quantize)
+	  fdct->quantize = quantize;
       }
       break;
 #endif
@@ -266,10 +274,12 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 	}
 	dtbl = fdct->divisors[qtblno];
 	for (i = 0; i < DCTSIZE2; i++) {
-	  compute_reciprocal(
+	  if(!compute_reciprocal(
 	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
 				  (INT32) aanscales[i]),
-		    CONST_BITS-3), &dtbl[i]);
+		    CONST_BITS-3), &dtbl[i])
+	    && fdct->quantize == jsimd_quantize)
+	    fdct->quantize = quantize;
 	}
       }
       break;

jchuff.c

@@ -36,7 +36,7 @@
 #include <limits.h>
 
 static unsigned char jpeg_first_bit_table[65536];
-int jpeg_first_bit_table_init=0;
+static int jpeg_first_bit_table_init=0;
 
 #ifndef min
  #define min(a,b) ((a)<(b)?(a):(b))
@@ -49,7 +49,7 @@ int jpeg_first_bit_table_init=0;
  */
 
 typedef struct {
-  long put_buffer;		/* current bit-accumulation buffer */
+  size_t put_buffer;		/* current bit-accumulation buffer */
   int put_bits;			/* # of bits now in it */
   int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
 } savable_state;
@@ -384,7 +384,7 @@ dump_buffer (working_state * state)
   put_buffer = (put_buffer << size) | code;                     \
  }
 
-#if __WORDSIZE==64
+#if __WORDSIZE==64 || defined(_WIN64)
 
 #define DUMP_BITS(code, size) {                                 \
   CHECKBUF47()                                                  \
@@ -423,9 +423,7 @@ dump_buffer (working_state * state)
   CHECKBUF15()                                \
  }
 
-int _max=0;
-
-#if __WORDSIZE==64
+#if __WORDSIZE==64 || defined(_WIN64)
 
 #define DUMP_VALUE(ht, codevalue, t, nbits) { \
   size = ht->ehufsi[codevalue];               \
@@ -489,8 +487,8 @@ LOCAL(boolean)
 flush_bits (working_state * state)
 {
   unsigned char _buffer[BUFSIZE], *buffer;
-  long put_buffer;  int put_bits;
-  int bytes, bytestocopy, localbuf = 0;
+  size_t put_buffer;  int put_bits;
+  size_t bytes, bytestocopy;  int localbuf = 0;
 
   put_buffer = state->cur.put_buffer;
   put_bits = state->cur.put_bits;
@@ -515,9 +513,9 @@ encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
   int nbits;
   int r, sflag, size, code;
   unsigned char _buffer[BUFSIZE], *buffer;
-  long put_buffer;  int put_bits;
+  size_t put_buffer;  int put_bits;
   int code_0xf0 = actbl->ehufco[0xf0], size_0xf0 = actbl->ehufsi[0xf0];
-  int bytes, bytestocopy, localbuf = 0;
+  size_t bytes, bytestocopy;  int localbuf = 0;
 
   put_buffer = state->cur.put_buffer;
   put_bits = state->cur.put_bits;

jcinit.c

@@ -42,7 +42,11 @@ jinit_compress_master (j_compress_ptr cinfo)
   jinit_forward_dct(cinfo);
   /* Entropy encoding: either Huffman or arithmetic coding. */
   if (cinfo->arith_code) {
+#ifdef C_ARITH_CODING_SUPPORTED
+    jinit_arith_encoder(cinfo);
+#else
     ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
+#endif
   } else {
     if (cinfo->progressive_mode) {
 #ifdef C_PROGRESSIVE_SUPPORTED

jcmarker.c

@@ -2,6 +2,7 @@
  * jcmarker.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -11,6 +12,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jpegcomp.h"
 
 
 typedef enum {			/* JPEG marker codes */
@@ -285,13 +287,13 @@ emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
   emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */
 
   /* Make sure image isn't bigger than SOF field can handle */
-  if ((long) cinfo->image_height > 65535L ||
-      (long) cinfo->image_width > 65535L)
+  if ((long) cinfo->_jpeg_height > 65535L ||
+      (long) cinfo->_jpeg_width > 65535L)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535);
 
   emit_byte(cinfo, cinfo->data_precision);
-  emit_2bytes(cinfo, (int) cinfo->image_height);
-  emit_2bytes(cinfo, (int) cinfo->image_width);
+  emit_2bytes(cinfo, (int) cinfo->_jpeg_height);
+  emit_2bytes(cinfo, (int) cinfo->_jpeg_width);
 
   emit_byte(cinfo, cinfo->num_components);
 

jcmaster.c

@@ -2,6 +2,8 @@
  * jcmaster.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2010 by Guido Vollbeding.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,6 +16,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jpegcomp.h"
 
 
 /* Private state */
@@ -42,8 +45,28 @@ typedef my_comp_master * my_master_ptr;
  * Support routines that do various essential calculations.
  */
 
+#if JPEG_LIB_VERSION >= 70
+/*
+ * Compute JPEG image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+  /* Hardwire it to "no scaling" */
+  cinfo->jpeg_width = cinfo->image_width;
+  cinfo->jpeg_height = cinfo->image_height;
+  cinfo->min_DCT_h_scaled_size = DCTSIZE;
+  cinfo->min_DCT_v_scaled_size = DCTSIZE;
+}
+#endif
+
+
 LOCAL(void)
-initial_setup (j_compress_ptr cinfo)
+initial_setup (j_compress_ptr cinfo, boolean transcode_only)
 /* Do computations that are needed before master selection phase */
 {
   int ci;
@@ -51,14 +74,21 @@ initial_setup (j_compress_ptr cinfo)
   long samplesperrow;
   JDIMENSION jd_samplesperrow;
 
+#if JPEG_LIB_VERSION >= 70
+#if JPEG_LIB_VERSION >= 80
+  if (!transcode_only)
+#endif
+    jpeg_calc_jpeg_dimensions(cinfo);
+#endif
+
   /* Sanity check on image dimensions */
-  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
+  if (cinfo->_jpeg_height <= 0 || cinfo->_jpeg_width <= 0
       || cinfo->num_components <= 0 || cinfo->input_components <= 0)
     ERREXIT(cinfo, JERR_EMPTY_IMAGE);
 
   /* Make sure image isn't bigger than I can handle */
-  if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
-      (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
+  if ((long) cinfo->_jpeg_height > (long) JPEG_MAX_DIMENSION ||
+      (long) cinfo->_jpeg_width > (long) JPEG_MAX_DIMENSION)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
 
   /* Width of an input scanline must be representable as JDIMENSION. */
@@ -96,20 +126,24 @@ initial_setup (j_compress_ptr cinfo)
     /* Fill in the correct component_index value; don't rely on application */
     compptr->component_index = ci;
     /* For compression, we never do DCT scaling. */
+#if JPEG_LIB_VERSION >= 70
+    compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size = DCTSIZE;
+#else
     compptr->DCT_scaled_size = DCTSIZE;
+#endif
     /* Size in DCT blocks */
     compptr->width_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+      jdiv_round_up((long) cinfo->_jpeg_width * (long) compptr->h_samp_factor,
 		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
     compptr->height_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+      jdiv_round_up((long) cinfo->_jpeg_height * (long) compptr->v_samp_factor,
 		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
     /* Size in samples */
     compptr->downsampled_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
+      jdiv_round_up((long) cinfo->_jpeg_width * (long) compptr->h_samp_factor,
 		    (long) cinfo->max_h_samp_factor);
     compptr->downsampled_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
+      jdiv_round_up((long) cinfo->_jpeg_height * (long) compptr->v_samp_factor,
 		    (long) cinfo->max_v_samp_factor);
     /* Mark component needed (this flag isn't actually used for compression) */
     compptr->component_needed = TRUE;
@@ -119,7 +153,7 @@ initial_setup (j_compress_ptr cinfo)
    * main controller will call coefficient controller).
    */
   cinfo->total_iMCU_rows = (JDIMENSION)
-    jdiv_round_up((long) cinfo->image_height,
+    jdiv_round_up((long) cinfo->_jpeg_height,
 		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
 }
 
@@ -347,10 +381,10 @@ per_scan_setup (j_compress_ptr cinfo)
     
     /* Overall image size in MCUs */
     cinfo->MCUs_per_row = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width,
+      jdiv_round_up((long) cinfo->_jpeg_width,
 		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
     cinfo->MCU_rows_in_scan = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height,
+      jdiv_round_up((long) cinfo->_jpeg_height,
 		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
     
     cinfo->blocks_in_MCU = 0;
@@ -554,7 +588,7 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
   master->pub.is_last_pass = FALSE;
 
   /* Validate parameters, determine derived values */
-  initial_setup(cinfo);
+  initial_setup(cinfo, transcode_only);
 
   if (cinfo->scan_info != NULL) {
 #ifdef C_MULTISCAN_FILES_SUPPORTED

jconfig.h.in

@@ -1,3 +1,14 @@
+/* Version ID for the JPEG library.
+ * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60".
+ */
+#define JPEG_LIB_VERSION  62	/* Version 6b */
+
+/* Support arithmetic encoding */
+#undef C_ARITH_CODING_SUPPORTED
+
+/* Support arithmetic decoding */
+#undef D_ARITH_CODING_SUPPORTED
+
 /* Define if your compiler supports prototypes */
 #undef HAVE_PROTOTYPES
 

jconfig.txt

@@ -1,5 +1,5 @@
 /*
- * jconfig.doc
+ * jconfig.txt
  *
  * Copyright (C) 1991-1994, Thomas G. Lane.
  * This file is part of the Independent JPEG Group's software.
@@ -24,7 +24,7 @@
  */
 
 /* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
+ * (If not, you also need to use ansi2knr, see install.txt)
  */
 #define HAVE_PROTOTYPES
 
@@ -91,6 +91,15 @@
  */
 #undef INCOMPLETE_TYPES_BROKEN
 
+/* Define "boolean" as unsigned char, not int, on Windows systems.
+ */
+#ifdef _WIN32
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+#endif
+
 
 /*
  * The following options affect code selection within the JPEG library,

jcparam.c

@@ -2,7 +2,8 @@
  * jcparam.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Copyright (C) 2009, D. R. Commander.
+ * Modified 2003-2008 by Guido Vollbeding.
+ * Copyright (C) 2009-2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -61,6 +62,49 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
 }
 
 
+/* These are the sample quantization tables given in JPEG spec section K.1.
+ * The spec says that the values given produce "good" quality, and
+ * when divided by 2, "very good" quality.
+ */
+static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
+  16,  11,  10,  16,  24,  40,  51,  61,
+  12,  12,  14,  19,  26,  58,  60,  55,
+  14,  13,  16,  24,  40,  57,  69,  56,
+  14,  17,  22,  29,  51,  87,  80,  62,
+  18,  22,  37,  56,  68, 109, 103,  77,
+  24,  35,  55,  64,  81, 104, 113,  92,
+  49,  64,  78,  87, 103, 121, 120, 101,
+  72,  92,  95,  98, 112, 100, 103,  99
+};
+static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
+  17,  18,  24,  47,  99,  99,  99,  99,
+  18,  21,  26,  66,  99,  99,  99,  99,
+  24,  26,  56,  99,  99,  99,  99,  99,
+  47,  66,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99
+};
+
+
+#if JPEG_LIB_VERSION >= 70
+GLOBAL(void)
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables
+ * and straight percentage-scaling quality scales.
+ * This entry point allows different scalings for luminance and chrominance.
+ */
+{
+  /* Set up two quantization tables using the specified scaling */
+  jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
+		       cinfo->q_scale_factor[0], force_baseline);
+  jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
+		       cinfo->q_scale_factor[1], force_baseline);
+}
+#endif
+
+
 GLOBAL(void)
 jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
 			 boolean force_baseline)
@@ -70,31 +114,6 @@ jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
  * applications that insist on a linear percentage scaling.
  */
 {
-  /* These are the sample quantization tables given in JPEG spec section K.1.
-   * The spec says that the values given produce "good" quality, and
-   * when divided by 2, "very good" quality.
-   */
-  static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
-    16,  11,  10,  16,  24,  40,  51,  61,
-    12,  12,  14,  19,  26,  58,  60,  55,
-    14,  13,  16,  24,  40,  57,  69,  56,
-    14,  17,  22,  29,  51,  87,  80,  62,
-    18,  22,  37,  56,  68, 109, 103,  77,
-    24,  35,  55,  64,  81, 104, 113,  92,
-    49,  64,  78,  87, 103, 121, 120, 101,
-    72,  92,  95,  98, 112, 100, 103,  99
-  };
-  static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
-    17,  18,  24,  47,  99,  99,  99,  99,
-    18,  21,  26,  66,  99,  99,  99,  99,
-    24,  26,  56,  99,  99,  99,  99,  99,
-    47,  66,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99
-  };
-
   /* Set up two quantization tables using the specified scaling */
   jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
 		       scale_factor, force_baseline);
@@ -285,6 +304,10 @@ jpeg_set_defaults (j_compress_ptr cinfo)
 
   /* Initialize everything not dependent on the color space */
 
+#if JPEG_LIB_VERSION >= 70
+  cinfo->scale_num = 1;		/* 1:1 scaling */
+  cinfo->scale_denom = 1;
+#endif
   cinfo->data_precision = BITS_IN_JSAMPLE;
   /* Set up two quantization tables using default quality of 75 */
   jpeg_set_quality(cinfo, 75, TRUE);
@@ -321,6 +344,11 @@ jpeg_set_defaults (j_compress_ptr cinfo)
   /* By default, use the simpler non-cosited sampling alignment */
   cinfo->CCIR601_sampling = FALSE;
 
+#if JPEG_LIB_VERSION >= 70
+  /* By default, apply fancy downsampling */
+  cinfo->do_fancy_downsampling = TRUE;
+#endif
+
   /* No input smoothing */
   cinfo->smoothing_factor = 0;
 

jctrans.c

@@ -2,6 +2,7 @@
  * jctrans.c
  *
  * Copyright (C) 1995-1998, Thomas G. Lane.
+ * Modified 2000-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -76,6 +77,12 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
   dstinfo->image_height = srcinfo->image_height;
   dstinfo->input_components = srcinfo->num_components;
   dstinfo->in_color_space = srcinfo->jpeg_color_space;
+#if JPEG_LIB_VERSION >= 70
+  dstinfo->jpeg_width = srcinfo->output_width;
+  dstinfo->jpeg_height = srcinfo->output_height;
+  dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size;
+  dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size;
+#endif
   /* Initialize all parameters to default values */
   jpeg_set_defaults(dstinfo);
   /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
@@ -167,7 +174,11 @@ transencode_master_selection (j_compress_ptr cinfo,
 
   /* Entropy encoding: either Huffman or arithmetic coding. */
   if (cinfo->arith_code) {
+#ifdef C_ARITH_CODING_SUPPORTED
+    jinit_arith_encoder(cinfo);
+#else
     ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
+#endif
   } else {
     if (cinfo->progressive_mode) {
 #ifdef C_PROGRESSIVE_SUPPORTED

jdapistd.c

@@ -2,6 +2,7 @@
  * jdapistd.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -17,6 +18,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jpegcomp.h"
 
 
 /* Forward declarations */
@@ -202,7 +204,7 @@ jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
   }
 
   /* Verify that at least one iMCU row can be returned. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size;
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->_min_DCT_scaled_size;
   if (max_lines < lines_per_iMCU_row)
     ERREXIT(cinfo, JERR_BUFFER_SIZE);
 

jdarith.c

@@ -0,0 +1,761 @@
+/*
+ * jdarith.c
+ *
+ * Developed 1997-2009 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy decoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy decoder object for arithmetic decoding. */
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  INT32 c;       /* C register, base of coding interval + input bit buffer */
+  INT32 a;               /* A register, normalized size of coding interval */
+  int ct;     /* bit shift counter, # of bits left in bit buffer part of C */
+                                                         /* init: ct = -16 */
+                                                         /* run: ct = 0..7 */
+                                                         /* error: ct = -1 */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_decoder;
+
+typedef arith_entropy_decoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+
+LOCAL(int)
+get_byte (j_decompress_ptr cinfo)
+/* Read next input byte; we do not support suspension in this module. */
+{
+  struct jpeg_source_mgr * src = cinfo->src;
+
+  if (src->bytes_in_buffer == 0)
+    if (! (*src->fill_input_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  src->bytes_in_buffer--;
+  return GETJOCTET(*src->next_input_byte++);
+}
+
+
+/*
+ * The core arithmetic decoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Return value is 0 or 1 (binary decision).
+ *
+ * Note: I've changed the handling of the code base & bit
+ * buffer register C compared to other implementations
+ * based on the standards layout & procedures.
+ * While it also contains both the actual base of the
+ * coding interval (16 bits) and the next-bits buffer,
+ * the cut-point between these two parts is floating
+ * (instead of fixed) with the bit shift counter CT.
+ * Thus, we also need only one (variable instead of
+ * fixed size) shift for the LPS/MPS decision, and
+ * we can get away with any renormalization update
+ * of C (except for new data insertion, of course).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(int)
+arith_decode (j_decompress_ptr cinfo, unsigned char *st)
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv, data;
+
+  /* Renormalization & data input per section D.2.6 */
+  while (e->a < 0x8000L) {
+    if (--e->ct < 0) {
+      /* Need to fetch next data byte */
+      if (cinfo->unread_marker)
+	data = 0;		/* stuff zero data */
+      else {
+	data = get_byte(cinfo);	/* read next input byte */
+	if (data == 0xFF) {	/* zero stuff or marker code */
+	  do data = get_byte(cinfo);
+	  while (data == 0xFF);	/* swallow extra 0xFF bytes */
+	  if (data == 0)
+	    data = 0xFF;	/* discard stuffed zero byte */
+	  else {
+	    /* Note: Different from the Huffman decoder, hitting
+	     * a marker while processing the compressed data
+	     * segment is legal in arithmetic coding.
+	     * The convention is to supply zero data
+	     * then until decoding is complete.
+	     */
+	    cinfo->unread_marker = data;
+	    data = 0;
+	  }
+	}
+      }
+      e->c = (e->c << 8) | data; /* insert data into C register */
+      if ((e->ct += 8) < 0)	 /* update bit shift counter */
+	/* Need more initial bytes */
+	if (++e->ct == 0)
+	  /* Got 2 initial bytes -> re-init A and exit loop */
+	  e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */
+    }
+    e->a <<= 1;
+  }
+
+  /* Fetch values from our compact representation of Table D.2:
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Decode & estimation procedures per sections D.2.4 & D.2.5 */
+  temp = e->a - qe;
+  e->a = temp;
+  temp <<= e->ct;
+  if (e->c >= temp) {
+    e->c -= temp;
+    /* Conditional LPS (less probable symbol) exchange */
+    if (e->a < qe) {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    } else {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    }
+  } else if (e->a < 0x8000L) {
+    /* Conditional MPS (more probable symbol) exchange */
+    if (e->a < qe) {
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    } else {
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    }
+  }
+
+  return sv >> 7;
+}
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ */
+
+LOCAL(void)
+process_restart (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  /* Advance past the RSTn marker */
+  if (! (*cinfo->marker->read_restart_marker) (cinfo))
+    ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if (! cinfo->progressive_mode || cinfo->Ss) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Arithmetic MCU decoding.
+ * Each of these routines decodes and returns one MCU's worth of
+ * arithmetic-compressed coefficients.
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
+ */
+
+/*
+ * MCU decoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign;
+  int v, m;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */
+    (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, sign, k;
+  int v, m;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+  /* Figure F.20: Decode_AC_coefficients */
+  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (arith_decode(cinfo, st)) break;		/* EOB flag */
+    while (arith_decode(cinfo, st + 1) == 0) {
+      st += 3; k++;
+      if (k > cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+    /* Figure F.21: Decoding nonzero value v */
+    /* Figure F.22: Decoding the sign of v */
+    sign = arith_decode(cinfo, entropy->fixed_bin);
+    st += 2;
+    /* Figure F.23: Decoding the magnitude category of v */
+    if ((m = arith_decode(cinfo, st)) != 0) {
+      if (arith_decode(cinfo, st)) {
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+    }
+    v = m;
+    /* Figure F.24: Decoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      if (arith_decode(cinfo, st)) v |= m;
+    v += 1; if (sign) v = -v;
+    /* Scale and output coefficient in natural (dezigzagged) order */
+    (*block)[jpeg_natural_order[k]] = (JCOEF) (v << cinfo->Al);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for DC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int p1, blkn;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* Encoded data is simply the next bit of the two's-complement DC value */
+    if (arith_decode(cinfo, st))
+      MCU_data[blkn][0][0] |= p1;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  JCOEFPTR thiscoef;
+  unsigned char *st;
+  int tbl, k, kex;
+  int p1, m1;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+  m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  for (kex = cinfo->Se; kex > 0; kex--)
+    if ((*block)[jpeg_natural_order[kex]]) break;
+
+  for (k = cinfo->Ss; k <= cinfo->Se; k++) {
+    st = entropy->ac_stats[tbl] + 3 * (k - 1);
+    if (k > kex)
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+    for (;;) {
+      thiscoef = *block + jpeg_natural_order[k];
+      if (*thiscoef) {				/* previously nonzero coef */
+	if (arith_decode(cinfo, st + 2)) {
+	  if (*thiscoef < 0)
+	    *thiscoef += m1;
+	  else
+	    *thiscoef += p1;
+	}
+	break;
+      }
+      if (arith_decode(cinfo, st + 1)) {	/* newly nonzero coef */
+	if (arith_decode(cinfo, entropy->fixed_bin))
+	  *thiscoef = m1;
+	else
+	  *thiscoef = p1;
+	break;
+      }
+      st += 3; k++;
+      if (k > cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Decode one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  jpeg_component_info * compptr;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign, k;
+  int v, m;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    (*block)[0] = (JCOEF) entropy->last_dc_val[ci];
+
+    /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+    tbl = compptr->ac_tbl_no;
+
+    /* Figure F.20: Decode_AC_coefficients */
+    for (k = 1; k <= DCTSIZE2 - 1; k++) {
+      st = entropy->ac_stats[tbl] + 3 * (k - 1);
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+      while (arith_decode(cinfo, st + 1) == 0) {
+	st += 3; k++;
+	if (k > DCTSIZE2 - 1) {
+	  WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	  entropy->ct = -1;			/* spectral overflow */
+	  return TRUE;
+	}
+      }
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, entropy->fixed_bin);
+      st += 2;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	if (arith_decode(cinfo, st)) {
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (arith_decode(cinfo, st)) {
+	    if ((m <<= 1) == 0x8000) {
+	      WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	      entropy->ct = -1;			/* magnitude overflow */
+	      return TRUE;
+	    }
+	    st += 1;
+	  }
+	}
+      }
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      (*block)[jpeg_natural_order[k]] = (JCOEF) v;
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (cinfo->progressive_mode) {
+    /* Validate progressive scan parameters */
+    if (cinfo->Ss == 0) {
+      if (cinfo->Se != 0)
+	goto bad;
+    } else {
+      /* need not check Ss/Se < 0 since they came from unsigned bytes */
+      if (cinfo->Se < cinfo->Ss || cinfo->Se > DCTSIZE2 - 1)
+	goto bad;
+      /* AC scans may have only one component */
+      if (cinfo->comps_in_scan != 1)
+	goto bad;
+    }
+    if (cinfo->Ah != 0) {
+      /* Successive approximation refinement scan: must have Al = Ah-1. */
+      if (cinfo->Ah-1 != cinfo->Al)
+	goto bad;
+    }
+    if (cinfo->Al > 13) {	/* need not check for < 0 */
+      bad:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+    }
+    /* Update progression status, and verify that scan order is legal.
+     * Note that inter-scan inconsistencies are treated as warnings
+     * not fatal errors ... not clear if this is right way to behave.
+     */
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      int coefi, cindex = cinfo->cur_comp_info[ci]->component_index;
+      int *coef_bit_ptr = & cinfo->coef_bits[cindex][0];
+      if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
+	WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
+      for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
+	int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
+	if (cinfo->Ah != expected)
+	  WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
+	coef_bit_ptr[coefi] = cinfo->Al;
+      }
+    }
+    /* Select MCU decoding routine */
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_first;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_refine;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_refine;
+    }
+  } else {
+    /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+     * This ought to be an error condition, but we make it a warning.
+     */
+    if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 ||
+	(cinfo->Se < DCTSIZE2 && cinfo->Se != DCTSIZE2 - 1))
+      WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+    /* Select MCU decoding routine */
+    entropy->pub.decode_mcu = decode_mcu;
+  }
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if (! cinfo->progressive_mode || cinfo->Ss) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+    }
+  }
+
+  /* Initialize arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_arith_decoder (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_decoder));
+  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
+  entropy->pub.start_pass = start_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+
+  if (cinfo->progressive_mode) {
+    /* Create progression status table */
+    int *coef_bit_ptr, ci;
+    cinfo->coef_bits = (int (*)[DCTSIZE2])
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  cinfo->num_components*DCTSIZE2*SIZEOF(int));
+    coef_bit_ptr = & cinfo->coef_bits[0][0];
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      for (i = 0; i < DCTSIZE2; i++)
+	*coef_bit_ptr++ = -1;
+  }
+}

jdatadst.c

@@ -2,13 +2,14 @@
  * jdatadst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains compression data destination routines for the case of
- * emitting JPEG data to a file (or any stdio stream).  While these routines
- * are sufficient for most applications, some will want to use a different
- * destination manager.
+ * emitting JPEG data to memory or to a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different destination manager.
  * IMPORTANT: we assume that fwrite() will correctly transcribe an array of
  * JOCTETs into 8-bit-wide elements on external storage.  If char is wider
  * than 8 bits on your machine, you may need to do some tweaking.
@@ -19,6 +20,11 @@
 #include "jpeglib.h"
 #include "jerror.h"
 
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
 
 /* Expanded data destination object for stdio output */
 
@@ -34,6 +40,23 @@ typedef my_destination_mgr * my_dest_ptr;
 #define OUTPUT_BUF_SIZE  4096	/* choose an efficiently fwrite'able size */
 
 
+#if JPEG_LIB_VERSION >= 80
+/* Expanded data destination object for memory output */
+
+typedef struct {
+  struct jpeg_destination_mgr pub; /* public fields */
+
+  unsigned char ** outbuffer;	/* target buffer */
+  unsigned long * outsize;
+  unsigned char * newbuffer;	/* newly allocated buffer */
+  JOCTET * buffer;		/* start of buffer */
+  size_t bufsize;
+} my_mem_destination_mgr;
+
+typedef my_mem_destination_mgr * my_mem_dest_ptr;
+#endif
+
+
 /*
  * Initialize destination --- called by jpeg_start_compress
  * before any data is actually written.
@@ -53,6 +76,14 @@ init_destination (j_compress_ptr cinfo)
   dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
 }
 
+#if JPEG_LIB_VERSION >= 80
+METHODDEF(void)
+init_mem_destination (j_compress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+#endif
+
 
 /*
  * Empty the output buffer --- called whenever buffer fills up.
@@ -92,6 +123,38 @@ empty_output_buffer (j_compress_ptr cinfo)
   return TRUE;
 }
 
+#if JPEG_LIB_VERSION >= 80
+METHODDEF(boolean)
+empty_mem_output_buffer (j_compress_ptr cinfo)
+{
+  size_t nextsize;
+  JOCTET * nextbuffer;
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  /* Try to allocate new buffer with double size */
+  nextsize = dest->bufsize * 2;
+  nextbuffer = malloc(nextsize);
+
+  if (nextbuffer == NULL)
+    ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+
+  MEMCOPY(nextbuffer, dest->buffer, dest->bufsize);
+
+  if (dest->newbuffer != NULL)
+    free(dest->newbuffer);
+
+  dest->newbuffer = nextbuffer;
+
+  dest->pub.next_output_byte = nextbuffer + dest->bufsize;
+  dest->pub.free_in_buffer = dest->bufsize;
+
+  dest->buffer = nextbuffer;
+  dest->bufsize = nextsize;
+
+  return TRUE;
+}
+#endif
+
 
 /*
  * Terminate destination --- called by jpeg_finish_compress
@@ -119,6 +182,17 @@ term_destination (j_compress_ptr cinfo)
     ERREXIT(cinfo, JERR_FILE_WRITE);
 }
 
+#if JPEG_LIB_VERSION >= 80
+METHODDEF(void)
+term_mem_destination (j_compress_ptr cinfo)
+{
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  *dest->outbuffer = dest->buffer;
+  *dest->outsize = dest->bufsize - dest->pub.free_in_buffer;
+}
+#endif
+
 
 /*
  * Prepare for output to a stdio stream.
@@ -149,3 +223,55 @@ jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile)
   dest->pub.term_destination = term_destination;
   dest->outfile = outfile;
 }
+
+
+#if JPEG_LIB_VERSION >= 80
+/*
+ * Prepare for output to a memory buffer.
+ * The caller may supply an own initial buffer with appropriate size.
+ * Otherwise, or when the actual data output exceeds the given size,
+ * the library adapts the buffer size as necessary.
+ * The standard library functions malloc/free are used for allocating
+ * larger memory, so the buffer is available to the application after
+ * finishing compression, and then the application is responsible for
+ * freeing the requested memory.
+ */
+
+GLOBAL(void)
+jpeg_mem_dest (j_compress_ptr cinfo,
+	       unsigned char ** outbuffer, unsigned long * outsize)
+{
+  my_mem_dest_ptr dest;
+
+  if (outbuffer == NULL || outsize == NULL)	/* sanity check */
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* The destination object is made permanent so that multiple JPEG images
+   * can be written to the same buffer without re-executing jpeg_mem_dest.
+   */
+  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
+    cinfo->dest = (struct jpeg_destination_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_mem_destination_mgr));
+  }
+
+  dest = (my_mem_dest_ptr) cinfo->dest;
+  dest->pub.init_destination = init_mem_destination;
+  dest->pub.empty_output_buffer = empty_mem_output_buffer;
+  dest->pub.term_destination = term_mem_destination;
+  dest->outbuffer = outbuffer;
+  dest->outsize = outsize;
+  dest->newbuffer = NULL;
+
+  if (*outbuffer == NULL || *outsize == 0) {
+    /* Allocate initial buffer */
+    dest->newbuffer = *outbuffer = malloc(OUTPUT_BUF_SIZE);
+    if (dest->newbuffer == NULL)
+      ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+    *outsize = OUTPUT_BUF_SIZE;
+  }
+
+  dest->pub.next_output_byte = dest->buffer = *outbuffer;
+  dest->pub.free_in_buffer = dest->bufsize = *outsize;
+}
+#endif

jdatasrc.c

@@ -2,13 +2,14 @@
  * jdatasrc.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009-2010 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains decompression data source routines for the case of
- * reading JPEG data from a file (or any stdio stream).  While these routines
- * are sufficient for most applications, some will want to use a different
- * source manager.
+ * reading JPEG data from memory or from a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different source manager.
  * IMPORTANT: we assume that fread() will correctly transcribe an array of
  * JOCTETs from 8-bit-wide elements on external storage.  If char is wider
  * than 8 bits on your machine, you may need to do some tweaking.
@@ -52,6 +53,14 @@ init_source (j_decompress_ptr cinfo)
   src->start_of_file = TRUE;
 }
 
+#if JPEG_LIB_VERSION >= 80
+METHODDEF(void)
+init_mem_source (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+#endif
+
 
 /*
  * Fill the input buffer --- called whenever buffer is emptied.
@@ -111,6 +120,28 @@ fill_input_buffer (j_decompress_ptr cinfo)
   return TRUE;
 }
 
+#if JPEG_LIB_VERSION >= 80
+METHODDEF(boolean)
+fill_mem_input_buffer (j_decompress_ptr cinfo)
+{
+  static JOCTET mybuffer[4];
+
+  /* The whole JPEG data is expected to reside in the supplied memory
+   * buffer, so any request for more data beyond the given buffer size
+   * is treated as an error.
+   */
+  WARNMS(cinfo, JWRN_JPEG_EOF);
+  /* Insert a fake EOI marker */
+  mybuffer[0] = (JOCTET) 0xFF;
+  mybuffer[1] = (JOCTET) JPEG_EOI;
+
+  cinfo->src->next_input_byte = mybuffer;
+  cinfo->src->bytes_in_buffer = 2;
+
+  return TRUE;
+}
+#endif
+
 
 /*
  * Skip data --- used to skip over a potentially large amount of
@@ -127,22 +158,22 @@ fill_input_buffer (j_decompress_ptr cinfo)
 METHODDEF(void)
 skip_input_data (j_decompress_ptr cinfo, long num_bytes)
 {
-  my_src_ptr src = (my_src_ptr) cinfo->src;
+  struct jpeg_source_mgr * src = cinfo->src;
 
   /* Just a dumb implementation for now.  Could use fseek() except
    * it doesn't work on pipes.  Not clear that being smart is worth
    * any trouble anyway --- large skips are infrequent.
    */
   if (num_bytes > 0) {
-    while (num_bytes > (long) src->pub.bytes_in_buffer) {
-      num_bytes -= (long) src->pub.bytes_in_buffer;
-      (void) fill_input_buffer(cinfo);
+    while (num_bytes > (long) src->bytes_in_buffer) {
+      num_bytes -= (long) src->bytes_in_buffer;
+      (void) (*src->fill_input_buffer) (cinfo);
       /* note we assume that fill_input_buffer will never return FALSE,
        * so suspension need not be handled.
        */
     }
-    src->pub.next_input_byte += (size_t) num_bytes;
-    src->pub.bytes_in_buffer -= (size_t) num_bytes;
+    src->next_input_byte += (size_t) num_bytes;
+    src->bytes_in_buffer -= (size_t) num_bytes;
   }
 }
 
@@ -210,3 +241,40 @@ jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile)
   src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */
   src->pub.next_input_byte = NULL; /* until buffer loaded */
 }
+
+
+#if JPEG_LIB_VERSION >= 80
+/*
+ * Prepare for input from a supplied memory buffer.
+ * The buffer must contain the whole JPEG data.
+ */
+
+GLOBAL(void)
+jpeg_mem_src (j_decompress_ptr cinfo,
+	      unsigned char * inbuffer, unsigned long insize)
+{
+  struct jpeg_source_mgr * src;
+
+  if (inbuffer == NULL || insize == 0)	/* Treat empty input as fatal error */
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+
+  /* The source object is made permanent so that a series of JPEG images
+   * can be read from the same buffer by calling jpeg_mem_src only before
+   * the first one.
+   */
+  if (cinfo->src == NULL) {	/* first time for this JPEG object? */
+    cinfo->src = (struct jpeg_source_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(struct jpeg_source_mgr));
+  }
+
+  src = cinfo->src;
+  src->init_source = init_mem_source;
+  src->fill_input_buffer = fill_mem_input_buffer;
+  src->skip_input_data = skip_input_data;
+  src->resync_to_restart = jpeg_resync_to_restart; /* use default method */
+  src->term_source = term_source;
+  src->bytes_in_buffer = (size_t) insize;
+  src->next_input_byte = (JOCTET *) inbuffer;
+}
+#endif

jdcoefct.c

@@ -2,6 +2,7 @@
  * jdcoefct.c
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -17,6 +18,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jpegcomp.h"
 
 /* Block smoothing is only applicable for progressive JPEG, so: */
 #ifndef D_PROGRESSIVE_SUPPORTED
@@ -190,7 +192,7 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
 						    : compptr->last_col_width;
 	output_ptr = output_buf[compptr->component_index] +
-	  yoffset * compptr->DCT_scaled_size;
+	  yoffset * compptr->_DCT_scaled_size;
 	start_col = MCU_col_num * compptr->MCU_sample_width;
 	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
 	  if (cinfo->input_iMCU_row < last_iMCU_row ||
@@ -200,11 +202,11 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	      (*inverse_DCT) (cinfo, compptr,
 			      (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
 			      output_ptr, output_col);
-	      output_col += compptr->DCT_scaled_size;
+	      output_col += compptr->_DCT_scaled_size;
 	    }
 	  }
 	  blkn += compptr->MCU_width;
-	  output_ptr += compptr->DCT_scaled_size;
+	  output_ptr += compptr->_DCT_scaled_size;
 	}
       }
     }
@@ -365,9 +367,9 @@ decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
 			output_ptr, output_col);
 	buffer_ptr++;
-	output_col += compptr->DCT_scaled_size;
+	output_col += compptr->_DCT_scaled_size;
       }
-      output_ptr += compptr->DCT_scaled_size;
+      output_ptr += compptr->_DCT_scaled_size;
     }
   }
 
@@ -660,9 +662,9 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	DC4 = DC5; DC5 = DC6;
 	DC7 = DC8; DC8 = DC9;
 	buffer_ptr++, prev_block_row++, next_block_row++;
-	output_col += compptr->DCT_scaled_size;
+	output_col += compptr->_DCT_scaled_size;
       }
-      output_ptr += compptr->DCT_scaled_size;
+      output_ptr += compptr->_DCT_scaled_size;
     }
   }
 

jdcolor.c

@@ -223,7 +223,6 @@ gray_rgb_convert (j_decompress_ptr cinfo,
 {
   register JSAMPROW inptr, outptr;
   JSAMPLE *maxinptr;
-  register JDIMENSION col;
   JDIMENSION num_cols = cinfo->output_width;
   int rindex = rgb_red[cinfo->out_color_space];
   int gindex = rgb_green[cinfo->out_color_space];

jddctmgr.c

@@ -3,6 +3,7 @@
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
  * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -21,6 +22,7 @@
 #include "jpeglib.h"
 #include "jdct.h"		/* Private declarations for DCT subsystem */
 #include "jsimddct.h"
+#include "jpegcomp.h"
 
 
 /*
@@ -100,7 +102,7 @@ start_pass (j_decompress_ptr cinfo)
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     /* Select the proper IDCT routine for this component's scaling */
-    switch (compptr->DCT_scaled_size) {
+    switch (compptr->_DCT_scaled_size) {
 #ifdef IDCT_SCALING_SUPPORTED
     case 1:
       method_ptr = jpeg_idct_1x1;
@@ -156,7 +158,7 @@ start_pass (j_decompress_ptr cinfo)
       }
       break;
     default:
-      ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size);
+      ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->_DCT_scaled_size);
       break;
     }
     idct->pub.inverse_DCT[ci] = method_ptr;

jdhuff.c

@@ -2,6 +2,7 @@
  * jdhuff.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,9 +15,9 @@
  * storage only upon successful completion of an MCU.
  */
 
-/* Modifications:
+/* Performance enhancements:
  * Copyright (C)2007 Sun Microsystems, Inc.
- * Copyright (C)2009 D. R. Commander
+ * Copyright (C)2009-2010 D. R. Commander
  *
  * This library is free software and may be redistributed and/or modified under
  * the terms of the wxWindows Library License, Version 3.1 or (at your option)
@@ -33,6 +34,7 @@
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jdhuff.h"		/* Declarations shared with jdphuff.c */
+#include "jpegcomp.h"
 
 
 /*
@@ -137,7 +139,7 @@ start_pass_huff_decoder (j_decompress_ptr cinfo)
     if (compptr->component_needed) {
       entropy->dc_needed[blkn] = TRUE;
       /* we don't need the ACs if producing a 1/8th-size image */
-      entropy->ac_needed[blkn] = (compptr->DCT_scaled_size > 1);
+      entropy->ac_needed[blkn] = (compptr->_DCT_scaled_size > 1);
     } else {
       entropy->dc_needed[blkn] = entropy->ac_needed[blkn] = FALSE;
     }
@@ -240,6 +242,7 @@ jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno,
       dtbl->maxcode[l] = -1;	/* -1 if no codes of this length */
     }
   }
+  dtbl->valoffset[17] = 0;
   dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */
 
   /* Compute lookahead tables to speed up decoding.
@@ -620,6 +623,7 @@ decode_mcu_slow (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
   if (val0 == 0xFF) {                                   \
     buffer++;                                           \
     if (val1 != 0) {                                    \
+      cinfo->unread_marker = val1;                      \
       buffer   -= 2;                                    \
       get_buffer      &= ~0xFF;                         \
     }                                                   \
@@ -628,7 +632,7 @@ decode_mcu_slow (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 
 /***************************************************************/
 
-#if __WORDSIZE == 64
+#if __WORDSIZE == 64 || defined(_WIN64)
 
 #define ENSURE_SHORT \
   if (bits_left < 16) { \
@@ -657,7 +661,7 @@ decode_mcu_slow (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
       symbol |= GET_BITS(1); \
       size++; \
     } \
-    symbol = htbl->pub->huffval[ (int) (symbol + htbl->valoffset[size]) ]; \
+    symbol = htbl->pub->huffval[ (int) (symbol + htbl->valoffset[size]) & 0xFF ]; \
   } \
 }
 
@@ -736,6 +740,11 @@ decode_mcu_fast (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
     }
   }
 
+  if (cinfo->unread_marker != 0) {
+    cinfo->unread_marker = 0;
+    return FALSE;
+  }
+
   br_state.bytes_in_buffer -= (buffer - br_state.next_input_byte);
   br_state.next_input_byte = buffer;
   BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
@@ -765,23 +774,30 @@ METHODDEF(boolean)
 decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  int usefast = 1;
 
   /* Process restart marker if needed; may have to suspend */
   if (cinfo->restart_interval) {
     if (entropy->restarts_to_go == 0)
       if (! process_restart(cinfo))
 	return FALSE;
+    usefast = 0;
   }
 
+  if (cinfo->src->bytes_in_buffer < BUFSIZE * cinfo->blocks_in_MCU
+    || cinfo->unread_marker != 0)
+    usefast = 0;
+
   /* If we've run out of data, just leave the MCU set to zeroes.
    * This way, we return uniform gray for the remainder of the segment.
    */
   if (! entropy->pub.insufficient_data) {
 
-    if (cinfo->src->bytes_in_buffer >= BUFSIZE) {
-      if (!decode_mcu_fast(cinfo, MCU_data)) return FALSE;
+    if (usefast) {
+      if (!decode_mcu_fast(cinfo, MCU_data)) goto use_slow;
     }
     else {
+      use_slow:
       if (!decode_mcu_slow(cinfo, MCU_data)) return FALSE;
     }
 

jdhuff.h

@@ -2,6 +2,7 @@
  * jdhuff.h
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -27,7 +28,7 @@ typedef struct {
   /* Basic tables: (element [0] of each array is unused) */
   INT32 maxcode[18];		/* largest code of length k (-1 if none) */
   /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
-  INT32 valoffset[17];		/* huffval[] offset for codes of length k */
+  INT32 valoffset[18];		/* huffval[] offset for codes of length k */
   /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
    * the smallest code of length k; so given a code of length k, the
    * corresponding symbol is huffval[code + valoffset[k]]
@@ -73,9 +74,9 @@ EXTERN(void) jpeg_make_d_derived_tbl
  * necessary.
  */
 
-#if __WORDSIZE == 64
+#if __WORDSIZE == 64 || defined(_WIN64)
 
-typedef long bit_buf_type;	/* type of bit-extraction buffer */
+typedef size_t bit_buf_type;	/* type of bit-extraction buffer */
 #define BIT_BUF_SIZE  64		/* size of buffer in bits */
 
 #else

jdinput.c

@@ -2,6 +2,8 @@
  * jdinput.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2002-2009 by Guido Vollbeding.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,6 +16,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jpegcomp.h"
 
 
 /* Private state */
@@ -35,6 +38,79 @@ METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo));
  * Routines to calculate various quantities related to the size of the image.
  */
 
+
+#if JPEG_LIB_VERSION >= 80
+/*
+ * Compute output image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_core_output_dimensions (j_decompress_ptr cinfo)
+/* Do computations that are needed before master selection phase.
+ * This function is used for transcoding and full decompression.
+ */
+{
+#ifdef IDCT_SCALING_SUPPORTED
+  int ci;
+  jpeg_component_info *compptr;
+
+  /* Compute actual output image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) {
+    /* Provide 1/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) {
+    /* Provide 2/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) {
+    /* Provide 4/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) {
+    /* Provide 8/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  }
+  /* Recompute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size;
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size;
+  }
+
+#else /* !IDCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->output_width = cinfo->image_width;
+  cinfo->output_height = cinfo->image_height;
+  /* jdinput.c has already initialized DCT_scaled_size,
+   * and has computed unscaled downsampled_width and downsampled_height.
+   */
+
+#endif /* IDCT_SCALING_SUPPORTED */
+}
+#endif
+
+
 LOCAL(void)
 initial_setup (j_decompress_ptr cinfo)
 /* Called once, when first SOS marker is reached */
@@ -70,16 +146,30 @@ initial_setup (j_decompress_ptr cinfo)
 				   compptr->v_samp_factor);
   }
 
+#if JPEG_LIB_VERSION >=80
+    cinfo->block_size = DCTSIZE;
+    cinfo->natural_order = jpeg_natural_order;
+    cinfo->lim_Se = DCTSIZE2-1;
+#endif
+
   /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE.
    * In the full decompressor, this will be overridden by jdmaster.c;
    * but in the transcoder, jdmaster.c is not used, so we must do it here.
    */
+#if JPEG_LIB_VERSION >= 70
+  cinfo->min_DCT_h_scaled_size = cinfo->min_DCT_v_scaled_size = DCTSIZE;
+#else
   cinfo->min_DCT_scaled_size = DCTSIZE;
+#endif
 
   /* Compute dimensions of components */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
+#if JPEG_LIB_VERSION >= 70
+    compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size = DCTSIZE;
+#else
     compptr->DCT_scaled_size = DCTSIZE;
+#endif
     /* Size in DCT blocks */
     compptr->width_in_blocks = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
@@ -138,7 +228,7 @@ per_scan_setup (j_decompress_ptr cinfo)
     compptr->MCU_width = 1;
     compptr->MCU_height = 1;
     compptr->MCU_blocks = 1;
-    compptr->MCU_sample_width = compptr->DCT_scaled_size;
+    compptr->MCU_sample_width = compptr->_DCT_scaled_size;
     compptr->last_col_width = 1;
     /* For noninterleaved scans, it is convenient to define last_row_height
      * as the number of block rows present in the last iMCU row.
@@ -174,7 +264,7 @@ per_scan_setup (j_decompress_ptr cinfo)
       compptr->MCU_width = compptr->h_samp_factor;
       compptr->MCU_height = compptr->v_samp_factor;
       compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
-      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->_DCT_scaled_size;
       /* Figure number of non-dummy blocks in last MCU column & row */
       tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
       if (tmp == 0) tmp = compptr->MCU_width;

jdmainct.c

@@ -2,6 +2,7 @@
  * jdmainct.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -16,6 +17,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jpegcomp.h"
 
 
 /*
@@ -161,7 +163,7 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
 {
   my_main_ptr main = (my_main_ptr) cinfo->main;
   int ci, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->_min_DCT_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf;
 
@@ -175,8 +177,8 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
     /* Get space for pointer lists --- M+4 row groups in each list.
      * We alloc both pointer lists with one call to save a few cycles.
      */
@@ -202,14 +204,14 @@ make_funny_pointers (j_decompress_ptr cinfo)
 {
   my_main_ptr main = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->_min_DCT_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY buf, xbuf0, xbuf1;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
     xbuf0 = main->xbuffer[0][ci];
     xbuf1 = main->xbuffer[1][ci];
     /* First copy the workspace pointers as-is */
@@ -242,14 +244,14 @@ set_wraparound_pointers (j_decompress_ptr cinfo)
 {
   my_main_ptr main = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->_min_DCT_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf0, xbuf1;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
     xbuf0 = main->xbuffer[0][ci];
     xbuf1 = main->xbuffer[1][ci];
     for (i = 0; i < rgroup; i++) {
@@ -277,8 +279,8 @@ set_bottom_pointers (j_decompress_ptr cinfo)
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     /* Count sample rows in one iMCU row and in one row group */
-    iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;
-    rgroup = iMCUheight / cinfo->min_DCT_scaled_size;
+    iMCUheight = compptr->v_samp_factor * compptr->_DCT_scaled_size;
+    rgroup = iMCUheight / cinfo->_min_DCT_scaled_size;
     /* Count nondummy sample rows remaining for this component */
     rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
     if (rows_left == 0) rows_left = iMCUheight;
@@ -357,7 +359,7 @@ process_data_simple_main (j_decompress_ptr cinfo,
   }
 
   /* There are always min_DCT_scaled_size row groups in an iMCU row. */
-  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;
+  rowgroups_avail = (JDIMENSION) cinfo->_min_DCT_scaled_size;
   /* Note: at the bottom of the image, we may pass extra garbage row groups
    * to the postprocessor.  The postprocessor has to check for bottom
    * of image anyway (at row resolution), so no point in us doing it too.
@@ -417,7 +419,7 @@ process_data_context_main (j_decompress_ptr cinfo,
   case CTX_PREPARE_FOR_IMCU:
     /* Prepare to process first M-1 row groups of this iMCU row */
     main->rowgroup_ctr = 0;
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);
+    main->rowgroups_avail = (JDIMENSION) (cinfo->_min_DCT_scaled_size - 1);
     /* Check for bottom of image: if so, tweak pointers to "duplicate"
      * the last sample row, and adjust rowgroups_avail to ignore padding rows.
      */
@@ -440,8 +442,8 @@ process_data_context_main (j_decompress_ptr cinfo,
     main->buffer_full = FALSE;
     /* Still need to process last row group of this iMCU row, */
     /* which is saved at index M+1 of the other xbuffer */
-    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);
+    main->rowgroup_ctr = (JDIMENSION) (cinfo->_min_DCT_scaled_size + 1);
+    main->rowgroups_avail = (JDIMENSION) (cinfo->_min_DCT_scaled_size + 2);
     main->context_state = CTX_POSTPONED_ROW;
   }
 }
@@ -492,21 +494,21 @@ jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
    * ngroups is the number of row groups we need.
    */
   if (cinfo->upsample->need_context_rows) {
-    if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */
+    if (cinfo->_min_DCT_scaled_size < 2) /* unsupported, see comments above */
       ERREXIT(cinfo, JERR_NOTIMPL);
     alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
-    ngroups = cinfo->min_DCT_scaled_size + 2;
+    ngroups = cinfo->_min_DCT_scaled_size + 2;
   } else {
-    ngroups = cinfo->min_DCT_scaled_size;
+    ngroups = cinfo->_min_DCT_scaled_size;
   }
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+      cinfo->_min_DCT_scaled_size; /* height of a row group of component */
     main->buffer[ci] = (*cinfo->mem->alloc_sarray)
 			((j_common_ptr) cinfo, JPOOL_IMAGE,
-			 compptr->width_in_blocks * compptr->DCT_scaled_size,
+			 compptr->width_in_blocks * compptr->_DCT_scaled_size,
 			 (JDIMENSION) (rgroup * ngroups));
   }
 }

jdmaster.c

@@ -2,7 +2,7 @@
  * jdmaster.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Copyright (C) 2009, D. R. Commander.
+ * Copyright (C) 2009-2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -15,6 +15,7 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
+#include "jpegcomp.h"
 
 
 /* Private state */
@@ -68,9 +69,9 @@ use_merged_upsample (j_decompress_ptr cinfo)
       cinfo->comp_info[2].v_samp_factor != 1)
     return FALSE;
   /* furthermore, it doesn't work if we've scaled the IDCTs differently */
-  if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
-      cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
-      cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size)
+  if (cinfo->comp_info[0]._DCT_scaled_size != cinfo->_min_DCT_scaled_size ||
+      cinfo->comp_info[1]._DCT_scaled_size != cinfo->_min_DCT_scaled_size ||
+      cinfo->comp_info[2]._DCT_scaled_size != cinfo->_min_DCT_scaled_size)
     return FALSE;
   /* ??? also need to test for upsample-time rescaling, when & if supported */
   return TRUE;			/* by golly, it'll work... */
@@ -109,26 +110,42 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
       jdiv_round_up((long) cinfo->image_width, 8L);
     cinfo->output_height = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height, 8L);
+#if JPEG_LIB_VERSION >= 70
+    cinfo->min_DCT_h_scaled_size = cinfo->min_DCT_v_scaled_size = 1;
+#else
     cinfo->min_DCT_scaled_size = 1;
+#endif
   } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) {
     /* Provide 1/4 scaling */
     cinfo->output_width = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width, 4L);
     cinfo->output_height = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height, 4L);
+#if JPEG_LIB_VERSION >= 70
+    cinfo->min_DCT_h_scaled_size = cinfo->min_DCT_v_scaled_size = 2;
+#else
     cinfo->min_DCT_scaled_size = 2;
+#endif
   } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) {
     /* Provide 1/2 scaling */
     cinfo->output_width = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width, 2L);
     cinfo->output_height = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height, 2L);
+#if JPEG_LIB_VERSION >= 70
+    cinfo->min_DCT_h_scaled_size = cinfo->min_DCT_v_scaled_size = 4;
+#else
     cinfo->min_DCT_scaled_size = 4;
+#endif
   } else {
     /* Provide 1/1 scaling */
     cinfo->output_width = cinfo->image_width;
     cinfo->output_height = cinfo->image_height;
+#if JPEG_LIB_VERSION >= 70
+    cinfo->min_DCT_h_scaled_size = cinfo->min_DCT_v_scaled_size = DCTSIZE;
+#else
     cinfo->min_DCT_scaled_size = DCTSIZE;
+#endif
   }
   /* In selecting the actual DCT scaling for each component, we try to
    * scale up the chroma components via IDCT scaling rather than upsampling.
@@ -137,15 +154,19 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
    */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    int ssize = cinfo->min_DCT_scaled_size;
+    int ssize = cinfo->_min_DCT_scaled_size;
     while (ssize < DCTSIZE &&
 	   (compptr->h_samp_factor * ssize * 2 <=
-	    cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) &&
+	    cinfo->max_h_samp_factor * cinfo->_min_DCT_scaled_size) &&
 	   (compptr->v_samp_factor * ssize * 2 <=
-	    cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) {
+	    cinfo->max_v_samp_factor * cinfo->_min_DCT_scaled_size)) {
       ssize = ssize * 2;
     }
+#if JPEG_LIB_VERSION >= 70
+    compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size = ssize;
+#else
     compptr->DCT_scaled_size = ssize;
+#endif
   }
 
   /* Recompute downsampled dimensions of components;
@@ -156,11 +177,11 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
     /* Size in samples, after IDCT scaling */
     compptr->downsampled_width = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width *
-		    (long) (compptr->h_samp_factor * compptr->DCT_scaled_size),
+		    (long) (compptr->h_samp_factor * compptr->_DCT_scaled_size),
 		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
     compptr->downsampled_height = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height *
-		    (long) (compptr->v_samp_factor * compptr->DCT_scaled_size),
+		    (long) (compptr->v_samp_factor * compptr->_DCT_scaled_size),
 		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
   }
 
@@ -384,7 +405,11 @@ master_selection (j_decompress_ptr cinfo)
   jinit_inverse_dct(cinfo);
   /* Entropy decoding: either Huffman or arithmetic coding. */
   if (cinfo->arith_code) {
+#ifdef D_ARITH_CODING_SUPPORTED
+    jinit_arith_decoder(cinfo);
+#else
     ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
+#endif
   } else {
     if (cinfo->progressive_mode) {
 #ifdef D_PROGRESSIVE_SUPPORTED

jdsample.c

@@ -3,6 +3,7 @@
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
  * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -23,6 +24,7 @@
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jsimd.h"
+#include "jpegcomp.h"
 
 
 /* Pointer to routine to upsample a single component */
@@ -420,7 +422,7 @@ jinit_upsampler (j_decompress_ptr cinfo)
   /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1,
    * so don't ask for it.
    */
-  do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1;
+  do_fancy = cinfo->do_fancy_upsampling && cinfo->_min_DCT_scaled_size > 1;
 
   /* Verify we can handle the sampling factors, select per-component methods,
    * and create storage as needed.
@@ -430,10 +432,10 @@ jinit_upsampler (j_decompress_ptr cinfo)
     /* Compute size of an "input group" after IDCT scaling.  This many samples
      * are to be converted to max_h_samp_factor * max_v_samp_factor pixels.
      */
-    h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
-    v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
+    h_in_group = (compptr->h_samp_factor * compptr->_DCT_scaled_size) /
+		 cinfo->_min_DCT_scaled_size;
+    v_in_group = (compptr->v_samp_factor * compptr->_DCT_scaled_size) /
+		 cinfo->_min_DCT_scaled_size;
     h_out_group = cinfo->max_h_samp_factor;
     v_out_group = cinfo->max_v_samp_factor;
     upsample->rowgroup_height[ci] = v_in_group; /* save for use later */

jdtrans.c

@@ -99,9 +99,18 @@ transdecode_master_selection (j_decompress_ptr cinfo)
   /* This is effectively a buffered-image operation. */
   cinfo->buffered_image = TRUE;
 
+#if JPEG_LIB_VERSION >= 80
+  /* Compute output image dimensions and related values. */
+  jpeg_core_output_dimensions(cinfo);
+#endif
+
   /* Entropy decoding: either Huffman or arithmetic coding. */
   if (cinfo->arith_code) {
+#ifdef D_ARITH_CODING_SUPPORTED
+    jinit_arith_decoder(cinfo);
+#else
     ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
+#endif
   } else {
     if (cinfo->progressive_mode) {
 #ifdef D_PROGRESSIVE_SUPPORTED

jerror.h

@@ -2,6 +2,7 @@
  * jerror.h
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 1997-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -40,11 +41,12 @@ JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */
 
 /* For maintenance convenience, list is alphabetical by message code name */
 JMESSAGE(JERR_ARITH_NOTIMPL,
-	 "Sorry, there are legal restrictions on arithmetic coding")
+	 "Sorry, arithmetic coding is not implemented")
 JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix")
 JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
 JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
 JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
+JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request")
 JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
 JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported")
 JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
@@ -93,6 +95,7 @@ JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data")
 JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change")
 JMESSAGE(JERR_NOTIMPL, "Not implemented yet")
 JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time")
+JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined")
 JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported")
 JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined")
 JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image")
@@ -170,6 +173,7 @@ JMESSAGE(JTRC_UNKNOWN_IDS,
 JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u")
 JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u")
 JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d")
+JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code")
 JMESSAGE(JWRN_BOGUS_PROGRESSION,
 	 "Inconsistent progression sequence for component %d coefficient %d")
 JMESSAGE(JWRN_EXTRANEOUS_DATA,

jmemmgr.c

@@ -37,6 +37,15 @@ extern char * getenv JPP((const char * name));
 #endif
 
 
+LOCAL(size_t)
+round_up_pow2 (size_t a, size_t b)
+/* a rounded up to the next multiple of b, i.e. ceil(a/b)*b */
+/* Assumes a >= 0, b > 0, and b is a power of 2 */
+{
+  return ((a + b - 1) & (~(b - 1)));
+}
+
+
 /*
  * Some important notes:
  *   The allocation routines provided here must never return NULL.
@@ -122,7 +131,7 @@ typedef struct {
   jvirt_barray_ptr virt_barray_list;
 
   /* This counts total space obtained from jpeg_get_small/large */
-  long total_space_allocated;
+  size_t total_space_allocated;
 
   /* alloc_sarray and alloc_barray set this value for use by virtual
    * array routines.
@@ -265,7 +274,7 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
    * and so that algorithms can straddle outside the proper area up
    * to the next alignment.
    */
-  sizeofobject = jround_up(sizeofobject, ALIGN_SIZE);
+  sizeofobject = round_up_pow2(sizeofobject, ALIGN_SIZE);
 
   /* Check for unsatisfiable request (do now to ensure no overflow below) */
   if ((SIZEOF(small_pool_hdr) + sizeofobject + ALIGN_SIZE - 1) > MAX_ALLOC_CHUNK)
@@ -317,8 +326,8 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
   /* OK, allocate the object from the current pool */
   data_ptr = (char *) hdr_ptr; /* point to first data byte in pool... */
   data_ptr += SIZEOF(small_pool_hdr); /* ...by skipping the header... */
-  if ((unsigned long)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
-    data_ptr += ALIGN_SIZE - (unsigned long)data_ptr % ALIGN_SIZE;
+  if ((size_t)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
+    data_ptr += ALIGN_SIZE - (size_t)data_ptr % ALIGN_SIZE;
   data_ptr += hdr_ptr->bytes_used; /* point to place for object */
   hdr_ptr->bytes_used += sizeofobject;
   hdr_ptr->bytes_left -= sizeofobject;
@@ -354,7 +363,7 @@ alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
    * algorithms can straddle outside the proper area up to the next
    * alignment.
    */
-  sizeofobject = jround_up(sizeofobject, ALIGN_SIZE);
+  sizeofobject = round_up_pow2(sizeofobject, ALIGN_SIZE);
 
   /* Check for unsatisfiable request (do now to ensure no overflow below) */
   if ((SIZEOF(large_pool_hdr) + sizeofobject + ALIGN_SIZE - 1) > MAX_ALLOC_CHUNK)
@@ -382,8 +391,8 @@ alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
 
   data_ptr = (char *) hdr_ptr; /* point to first data byte in pool... */
   data_ptr += SIZEOF(small_pool_hdr); /* ...by skipping the header... */
-  if ((unsigned long)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
-    data_ptr += ALIGN_SIZE - (unsigned long)data_ptr % ALIGN_SIZE;
+  if ((size_t)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
+    data_ptr += ALIGN_SIZE - (size_t)data_ptr % ALIGN_SIZE;
 
   return (void FAR *) data_ptr;
 }
@@ -420,7 +429,7 @@ alloc_sarray (j_common_ptr cinfo, int pool_id,
   /* Make sure each row is properly aligned */
   if ((ALIGN_SIZE % SIZEOF(JSAMPLE)) != 0)
     out_of_memory(cinfo, 5);	/* safety check */
-  samplesperrow = jround_up(samplesperrow, (2 * ALIGN_SIZE) / SIZEOF(JSAMPLE));
+  samplesperrow = (JDIMENSION)round_up_pow2(samplesperrow, (2 * ALIGN_SIZE) / SIZEOF(JSAMPLE));
 
   /* Calculate max # of rows allowed in one allocation chunk */
   ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
@@ -608,8 +617,8 @@ realize_virt_arrays (j_common_ptr cinfo)
 /* Allocate the in-memory buffers for any unrealized virtual arrays */
 {
   my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
-  long space_per_minheight, maximum_space, avail_mem;
-  long minheights, max_minheights;
+  size_t space_per_minheight, maximum_space, avail_mem;
+  size_t minheights, max_minheights;
   jvirt_sarray_ptr sptr;
   jvirt_barray_ptr bptr;
 

jmemnobs.c

@@ -69,9 +69,9 @@ jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
  * Here we always say, "we got all you want bud!"
  */
 
-GLOBAL(long)
-jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
-		    long max_bytes_needed, long already_allocated)
+GLOBAL(size_t)
+jpeg_mem_available (j_common_ptr cinfo, size_t min_bytes_needed,
+		    size_t max_bytes_needed, size_t already_allocated)
 {
   return max_bytes_needed;
 }

jmemsys.h

@@ -100,10 +100,10 @@ EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object,
  * Conversely, zero may be returned to always use the minimum amount of memory.
  */
 
-EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo,
-				     long min_bytes_needed,
-				     long max_bytes_needed,
-				     long already_allocated));
+EXTERN(size_t) jpeg_mem_available JPP((j_common_ptr cinfo,
+				     size_t min_bytes_needed,
+				     size_t max_bytes_needed,
+				     size_t already_allocated));
 
 
 /*

jmorecfg.h

@@ -257,8 +257,6 @@ typedef int boolean;
  * (You may HAVE to do that if your compiler doesn't like null source files.)
  */
 
-/* Arithmetic coding is unsupported for legal reasons.  Complaints to IBM. */
-
 /* Capability options common to encoder and decoder: */
 
 #define DCT_ISLOW_SUPPORTED	/* slow but accurate integer algorithm */
@@ -267,7 +265,6 @@ typedef int boolean;
 
 /* Encoder capability options: */
 
-#undef  C_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
 #define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
 #define C_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
 #define ENTROPY_OPT_SUPPORTED	    /* Optimization of entropy coding parms? */
@@ -283,7 +280,6 @@ typedef int boolean;
 
 /* Decoder capability options: */
 
-#undef  D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
 #define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
 #define D_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
 #define SAVE_MARKERS_SUPPORTED	    /* jpeg_save_markers() needed? */

jpegcomp.h

@@ -0,0 +1,26 @@
+/*
+ * jpegcomp.h
+ *
+ * Copyright (C) 2010, D. R. Commander
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * JPEG compatibility macros
+ * These declarations are considered internal to the JPEG library; most
+ * applications using the library shouldn't need to include this file.
+ */
+
+#if JPEG_LIB_VERSION >= 70
+#define _DCT_scaled_size DCT_h_scaled_size
+#define _min_DCT_scaled_size min_DCT_h_scaled_size
+#define _min_DCT_h_scaled_size min_DCT_h_scaled_size
+#define _min_DCT_v_scaled_size min_DCT_v_scaled_size
+#define _jpeg_width jpeg_width
+#define _jpeg_height jpeg_height
+#else
+#define _DCT_scaled_size DCT_scaled_size
+#define _min_DCT_scaled_size min_DCT_scaled_size
+#define _min_DCT_h_scaled_size min_DCT_scaled_size
+#define _min_DCT_v_scaled_size min_DCT_scaled_size
+#define _jpeg_width image_width
+#define _jpeg_height image_height
+#endif

jpegint.h

@@ -2,6 +2,7 @@
  * jpegint.h
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 1997-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -304,6 +305,7 @@ struct jpeg_color_quantizer {
 #define jinit_forward_dct	jIFDCT
 #define jinit_huff_encoder	jIHEncoder
 #define jinit_phuff_encoder	jIPHEncoder
+#define jinit_arith_encoder	jIAEncoder
 #define jinit_marker_writer	jIMWriter
 #define jinit_master_decompress	jIDMaster
 #define jinit_d_main_controller	jIDMainC
@@ -313,6 +315,7 @@ struct jpeg_color_quantizer {
 #define jinit_marker_reader	jIMReader
 #define jinit_huff_decoder	jIHDecoder
 #define jinit_phuff_decoder	jIPHDecoder
+#define jinit_arith_decoder	jIADecoder
 #define jinit_inverse_dct	jIIDCT
 #define jinit_upsampler		jIUpsampler
 #define jinit_color_deconverter	jIDColor
@@ -327,6 +330,7 @@ struct jpeg_color_quantizer {
 #define jzero_far		jZeroFar
 #define jpeg_zigzag_order	jZIGTable
 #define jpeg_natural_order	jZAGTable
+#define jpeg_aritab		jAriTab
 #endif /* NEED_SHORT_EXTERNAL_NAMES */
 
 
@@ -345,6 +349,7 @@ EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_phuff_encoder JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo));
 EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
 /* Decompression module initialization routines */
 EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
@@ -358,6 +363,7 @@ EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_phuff_decoder JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
 EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
@@ -382,6 +388,9 @@ extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
 #endif
 extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
 
+/* Arithmetic coding probability estimation tables in jaricom.c */
+extern const INT32 jpeg_aritab[];
+
 /* Suppress undefined-structure complaints if necessary. */
 
 #ifdef INCOMPLETE_TYPES_BROKEN

jpeglib.h

@@ -2,7 +2,8 @@
  * jpeglib.h
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Copyright (C) 2009, D. R. Commander.
+ * Modified 2002-2009 by Guido Vollbeding.
+ * Copyright (C) 2009-2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,10 +15,6 @@
 #ifndef JPEGLIB_H
 #define JPEGLIB_H
 
-#ifdef __cplusplus
-extern "C" {
-#endif
-
 /*
  * First we include the configuration files that record how this
  * installation of the JPEG library is set up.  jconfig.h can be
@@ -31,11 +28,11 @@ extern "C" {
 #include "jmorecfg.h"		/* seldom changed options */
 
 
-/* Version ID for the JPEG library.
- * Might be useful for tests like "#if JPEG_LIB_VERSION >= 60".
- */
-
-#define JPEG_LIB_VERSION  62	/* Version 6b */
+#ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
+extern "C" {
+#endif
+#endif
 
 
 /* Various constants determining the sizes of things.
@@ -149,12 +146,17 @@ typedef struct {
    * Values of 1,2,4,8 are likely to be supported.  Note that different
    * components may receive different IDCT scalings.
    */
+#if JPEG_LIB_VERSION >= 70
+  int DCT_h_scaled_size;
+  int DCT_v_scaled_size;
+#else
   int DCT_scaled_size;
+#endif
   /* The downsampled dimensions are the component's actual, unpadded number
    * of samples at the main buffer (preprocessing/compression interface), thus
    * downsampled_width = ceil(image_width * Hi/Hmax)
    * and similarly for height.  For decompression, IDCT scaling is included, so
-   * downsampled_width = ceil(image_width * Hi/Hmax * DCT_scaled_size/DCTSIZE)
+   * downsampled_width = ceil(image_width * Hi/Hmax * DCT_[h_]scaled_size/DCTSIZE)
    */
   JDIMENSION downsampled_width;	 /* actual width in samples */
   JDIMENSION downsampled_height; /* actual height in samples */
@@ -169,7 +171,7 @@ typedef struct {
   int MCU_width;		/* number of blocks per MCU, horizontally */
   int MCU_height;		/* number of blocks per MCU, vertically */
   int MCU_blocks;		/* MCU_width * MCU_height */
-  int MCU_sample_width;		/* MCU width in samples, MCU_width*DCT_scaled_size */
+  int MCU_sample_width;		/* MCU width in samples, MCU_width*DCT_[h_]scaled_size */
   int last_col_width;		/* # of non-dummy blocks across in last MCU */
   int last_row_height;		/* # of non-dummy blocks down in last MCU */
 
@@ -305,6 +307,19 @@ struct jpeg_compress_struct {
    * helper routines to simplify changing parameters.
    */
 
+#if JPEG_LIB_VERSION >= 70
+  unsigned int scale_num, scale_denom; /* fraction by which to scale image */
+
+  JDIMENSION jpeg_width;	/* scaled JPEG image width */
+  JDIMENSION jpeg_height;	/* scaled JPEG image height */
+  /* Dimensions of actual JPEG image that will be written to file,
+   * derived from input dimensions by scaling factors above.
+   * These fields are computed by jpeg_start_compress().
+   * You can also use jpeg_calc_jpeg_dimensions() to determine these values
+   * in advance of calling jpeg_start_compress().
+   */
+#endif
+
   int data_precision;		/* bits of precision in image data */
 
   int num_components;		/* # of color components in JPEG image */
@@ -312,14 +327,19 @@ struct jpeg_compress_struct {
 
   jpeg_component_info * comp_info;
   /* comp_info[i] describes component that appears i'th in SOF */
-  
+
   JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
-  /* ptrs to coefficient quantization tables, or NULL if not defined */
-  
+#if JPEG_LIB_VERSION >= 70
+  int q_scale_factor[NUM_QUANT_TBLS];
+#endif
+  /* ptrs to coefficient quantization tables, or NULL if not defined,
+   * and corresponding scale factors (percentage, initialized 100).
+   */
+
   JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
   JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
   /* ptrs to Huffman coding tables, or NULL if not defined */
-  
+
   UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */
   UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */
   UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */
@@ -335,6 +355,9 @@ struct jpeg_compress_struct {
   boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
   boolean optimize_coding;	/* TRUE=optimize entropy encoding parms */
   boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
+#if JPEG_LIB_VERSION >= 70
+  boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */
+#endif
   int smoothing_factor;		/* 1..100, or 0 for no input smoothing */
   J_DCT_METHOD dct_method;	/* DCT algorithm selector */
 
@@ -378,6 +401,11 @@ struct jpeg_compress_struct {
   int max_h_samp_factor;	/* largest h_samp_factor */
   int max_v_samp_factor;	/* largest v_samp_factor */
 
+#if JPEG_LIB_VERSION >= 70
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
+#endif
+
   JDIMENSION total_iMCU_rows;	/* # of iMCU rows to be input to coef ctlr */
   /* The coefficient controller receives data in units of MCU rows as defined
    * for fully interleaved scans (whether the JPEG file is interleaved or not).
@@ -403,6 +431,12 @@ struct jpeg_compress_struct {
 
   int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
 
+#if JPEG_LIB_VERSION >= 80
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order;	/* natural-order position array */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) */
+#endif
+
   /*
    * Links to compression subobjects (methods and private variables of modules)
    */
@@ -549,6 +583,9 @@ struct jpeg_decompress_struct {
   jpeg_component_info * comp_info;
   /* comp_info[i] describes component that appears i'th in SOF */
 
+#if JPEG_LIB_VERSION >= 80
+  boolean is_baseline;		/* TRUE if Baseline SOF0 encountered */
+#endif
   boolean progressive_mode;	/* TRUE if SOFn specifies progressive mode */
   boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
 
@@ -589,7 +626,12 @@ struct jpeg_decompress_struct {
   int max_h_samp_factor;	/* largest h_samp_factor */
   int max_v_samp_factor;	/* largest v_samp_factor */
 
+#if JPEG_LIB_VERSION >= 70
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
+#else
   int min_DCT_scaled_size;	/* smallest DCT_scaled_size of any component */
+#endif
 
   JDIMENSION total_iMCU_rows;	/* # of iMCU rows in image */
   /* The coefficient controller's input and output progress is measured in
@@ -597,7 +639,7 @@ struct jpeg_decompress_struct {
    * in fully interleaved JPEG scans, but are used whether the scan is
    * interleaved or not.  We define an iMCU row as v_samp_factor DCT block
    * rows of each component.  Therefore, the IDCT output contains
-   * v_samp_factor*DCT_scaled_size sample rows of a component per iMCU row.
+   * v_samp_factor*DCT_[v_]scaled_size sample rows of a component per iMCU row.
    */
 
   JSAMPLE * sample_range_limit; /* table for fast range-limiting */
@@ -621,6 +663,14 @@ struct jpeg_decompress_struct {
 
   int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
 
+#if JPEG_LIB_VERSION >= 80
+  /* These fields are derived from Se of first SOS marker.
+   */
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order; /* natural-order position array for entropy decode */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) for entropy decode */
+#endif
+
   /* This field is shared between entropy decoder and marker parser.
    * It is either zero or the code of a JPEG marker that has been
    * read from the data source, but has not yet been processed.
@@ -850,11 +900,18 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_destroy_decompress	jDestDecompress
 #define jpeg_stdio_dest		jStdDest
 #define jpeg_stdio_src		jStdSrc
+#if JPEG_LIB_VERSION >= 80
+#define jpeg_mem_dest		jMemDest
+#define jpeg_mem_src		jMemSrc
+#endif
 #define jpeg_set_defaults	jSetDefaults
 #define jpeg_set_colorspace	jSetColorspace
 #define jpeg_default_colorspace	jDefColorspace
 #define jpeg_set_quality	jSetQuality
 #define jpeg_set_linear_quality	jSetLQuality
+#if JPEG_LIB_VERSION >= 70
+#define jpeg_default_qtables	jDefQTables
+#endif
 #define jpeg_add_quant_table	jAddQuantTable
 #define jpeg_quality_scaling	jQualityScaling
 #define jpeg_simple_progression	jSimProgress
@@ -864,6 +921,9 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_start_compress	jStrtCompress
 #define jpeg_write_scanlines	jWrtScanlines
 #define jpeg_finish_compress	jFinCompress
+#if JPEG_LIB_VERSION >= 70
+#define jpeg_calc_jpeg_dimensions	jCjpegDimensions
+#endif
 #define jpeg_write_raw_data	jWrtRawData
 #define jpeg_write_marker	jWrtMarker
 #define jpeg_write_m_header	jWrtMHeader
@@ -880,6 +940,9 @@ typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
 #define jpeg_input_complete	jInComplete
 #define jpeg_new_colormap	jNewCMap
 #define jpeg_consume_input	jConsumeInput
+#if JPEG_LIB_VERSION >= 80
+#define jpeg_core_output_dimensions	jCoreDimensions
+#endif
 #define jpeg_calc_output_dimensions	jCalcDimensions
 #define jpeg_save_markers	jSaveMarkers
 #define jpeg_set_marker_processor	jSetMarker
@@ -924,6 +987,16 @@ EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo));
 EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile));
 EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile));
 
+#if JPEG_LIB_VERSION >= 80
+/* Data source and destination managers: memory buffers. */
+EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo,
+			       unsigned char ** outbuffer,
+			       unsigned long * outsize));
+EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo,
+			      unsigned char * inbuffer,
+			      unsigned long insize));
+#endif
+
 /* Default parameter setup for compression */
 EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo));
 /* Compression parameter setup aids */
@@ -935,6 +1008,10 @@ EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality,
 EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo,
 					  int scale_factor,
 					  boolean force_baseline));
+#if JPEG_LIB_VERSION >= 70
+EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo,
+				       boolean force_baseline));
+#endif
 EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl,
 				       const unsigned int *basic_table,
 				       int scale_factor,
@@ -954,12 +1031,17 @@ EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo,
 					     JDIMENSION num_lines));
 EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo));
 
+#if JPEG_LIB_VERSION >= 70
+/* Precalculate JPEG dimensions for current compression parameters. */
+EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo));
+#endif
+
 /* Replaces jpeg_write_scanlines when writing raw downsampled data. */
 EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo,
 					    JSAMPIMAGE data,
 					    JDIMENSION num_lines));
 
-/* Write a special marker.  See libjpeg.doc concerning safe usage. */
+/* Write a special marker.  See libjpeg.txt concerning safe usage. */
 EXTERN(void) jpeg_write_marker
 	JPP((j_compress_ptr cinfo, int marker,
 	     const JOCTET * dataptr, unsigned int datalen));
@@ -1013,6 +1095,9 @@ EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo));
 #define JPEG_SCAN_COMPLETED	4 /* Completed last iMCU row of a scan */
 
 /* Precalculate output dimensions for current decompression parameters. */
+#if JPEG_LIB_VERSION >= 80
+EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo));
+#endif
 EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo));
 
 /* Control saving of COM and APPn markers into marker_list. */
@@ -1108,7 +1193,9 @@ struct jpeg_color_quantizer { long dummy; };
 #endif
 
 #ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
 }
 #endif
+#endif
 
 #endif /* JPEGLIB_H */

jpegtran.1

@@ -1,4 +1,4 @@
-.TH JPEGTRAN 1 "3 August 1997"
+.TH JPEGTRAN 1 "11 October 2010"
 .SH NAME
 jpegtran \- lossless transformation of JPEG files
 .SH SYNOPSIS
@@ -60,6 +60,9 @@ Create progressive JPEG file.
 Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
 attached to the number.
 .TP
+.B \-arithmetic
+Use arithmetic coding.
+.TP
 .BI \-scans " file"
 Use the scan script given in the specified text file.
 .PP
@@ -117,7 +120,7 @@ switch:
 .TP
 .B \-trim
 Drop non-transformable edge blocks.
-.PP
+.IP
 Obviously, a transformation with
 .B \-trim
 is not reversible, so strictly speaking
@@ -130,12 +133,38 @@ trims only the bottom edge, but
 followed by
 .B \-rot 180 -trim
 trims both edges.
+.TP
+.B \-perfect
+If you are only interested in perfect transformations, add the
+.B \-perfect
+switch.  This causes
+.B jpegtran
+to fail with an error if the transformation is not perfect.
+.IP
+For example, you may want to do
+.IP
+.B (jpegtran \-rot 90 -perfect
+.I foo.jpg
+.B || djpeg
+.I foo.jpg
+.B | pnmflip \-r90 | cjpeg)
+.IP
+to do a perfect rotation, if available, or an approximated one if not.
+.TP
+.B \-crop WxH+X+Y
+Crop the image to a rectangular region of width W and height H, starting at
+point X,Y.  The lossless crop feature discards data outside of a given image
+region but losslessly preserves what is inside.  Like the rotate and flip
+transforms, lossless crop is restricted by the current JPEG format; the upper
+left corner of the selected region must fall on an iMCU boundary.  If it
+doesn't, then it is silently moved up and/or left to the nearest iMCU boundary
+(the lower right corner is unchanged.)
 .PP
-Another not-strictly-lossless transformation switch is:
+Other not-strictly-lossless transformation switches are:
 .TP
 .B \-grayscale
 Force grayscale output.
-.PP
+.IP
 This option discards the chrominance channels if the input image is YCbCr
 (ie, a standard color JPEG), resulting in a grayscale JPEG file.  The
 luminance channel is preserved exactly, so this is a better method of reducing
@@ -154,20 +183,16 @@ Copy no extra markers from source file.  This setting suppresses all
 comments and other excess baggage present in the source file.
 .TP
 .B \-copy comments
-Copy only comment markers.  This setting copies comments from the source file,
-but discards any other inessential data.
+Copy only comment markers.  This setting copies comments from the source file
+but discards any other data which is inessential for image display.
 .TP
 .B \-copy all
 Copy all extra markers.  This setting preserves miscellaneous markers
-found in the source file, such as JFIF thumbnails and Photoshop settings.
-In some files these extra markers can be sizable.
+found in the source file, such as JFIF thumbnails, Exif data, and Photoshop
+settings.  In some files, these extra markers can be sizable.
 .PP
-The default behavior is
-.BR "\-copy comments" .
-(Note: in IJG releases v6 and v6a,
-.B jpegtran
-always did the equivalent of
-.BR "\-copy none" .)
+The default behavior is \fB-copy comments\fR.  (Note: in IJG releases v6 and
+v6a, \fBjpegtran\fR always did the equivalent of \fB-copy none\fR.)
 .PP
 Additional switches recognized by jpegtran are:
 .TP
@@ -227,11 +252,11 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
 The transform options can't transform odd-size images perfectly.  Use
 .B \-trim
-if you don't like the results without it.
+or
+.B \-perfect
+if you don't like the results.
 .PP
 The entire image is read into memory and then written out again, even in
 cases where this isn't really necessary.  Expect swapping on large images,

jpegtran.c

@@ -1,19 +1,21 @@
 /*
  * jpegtran.c
  *
- * Copyright (C) 1995-1997, Thomas G. Lane.
+ * Copyright (C) 1995-2010, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains a command-line user interface for JPEG transcoding.
- * It is very similar to cjpeg.c, but provides lossless transcoding between
- * different JPEG file formats.  It also provides some lossless and sort-of-
- * lossless transformations of JPEG data.
+ * It is very similar to cjpeg.c, and partly to djpeg.c, but provides
+ * lossless transcoding between different JPEG file formats.  It also
+ * provides some lossless and sort-of-lossless transformations of JPEG data.
  */
 
 #include "cdjpeg.h"		/* Common decls for cjpeg/djpeg applications */
 #include "transupp.h"		/* Support routines for jpegtran */
 #include "jversion.h"		/* for version message */
+#include "config.h"
 
 #ifdef USE_CCOMMAND		/* command-line reader for Macintosh */
 #ifdef __MWERKS__
@@ -62,15 +64,19 @@ usage (void)
 #ifdef C_PROGRESSIVE_SUPPORTED
   fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
 #endif
-#if TRANSFORMS_SUPPORTED
   fprintf(stderr, "Switches for modifying the image:\n");
+#if TRANSFORMS_SUPPORTED
+  fprintf(stderr, "  -crop WxH+X+Y  Crop to a rectangular subarea\n");
   fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
   fprintf(stderr, "  -flip [horizontal|vertical]  Mirror image (left-right or top-bottom)\n");
+  fprintf(stderr, "  -perfect       Fail if there is non-transformable edge blocks\n");
   fprintf(stderr, "  -rotate [90|180|270]         Rotate image (degrees clockwise)\n");
+#endif
+#if TRANSFORMS_SUPPORTED
   fprintf(stderr, "  -transpose     Transpose image\n");
   fprintf(stderr, "  -transverse    Transverse transpose image\n");
   fprintf(stderr, "  -trim          Drop non-transformable edge blocks\n");
-#endif /* TRANSFORMS_SUPPORTED */
+#endif
   fprintf(stderr, "Switches for advanced users:\n");
   fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
   fprintf(stderr, "  -maxmemory N   Maximum memory to use (in kbytes)\n");
@@ -132,8 +138,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
   outfilename = NULL;
   copyoption = JCOPYOPT_DEFAULT;
   transformoption.transform = JXFORM_NONE;
+  transformoption.perfect = FALSE;
   transformoption.trim = FALSE;
   transformoption.force_grayscale = FALSE;
+  transformoption.crop = FALSE;
   cinfo->err->trace_level = 0;
 
   /* Scan command line options, adjust parameters */
@@ -160,7 +168,7 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       exit(EXIT_FAILURE);
 #endif
 
-    } else if (keymatch(arg, "copy", 1)) {
+    } else if (keymatch(arg, "copy", 2)) {
       /* Select which extra markers to copy. */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
@@ -173,13 +181,30 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       } else
 	usage();
 
+    } else if (keymatch(arg, "crop", 2)) {
+      /* Perform lossless cropping. */
+#if TRANSFORMS_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+	fprintf(stderr, "%s: bogus -crop argument '%s'\n",
+		progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
     } else if (keymatch(arg, "debug", 1) || keymatch(arg, "verbose", 1)) {
       /* Enable debug printouts. */
       /* On first -d, print version identification */
       static boolean printed_version = FALSE;
 
       if (! printed_version) {
-	fprintf(stderr, "Independent JPEG Group's JPEGTRAN, version %s\n%s\n",
+	fprintf(stderr, "%s version %s (build %s)\n",
+		PACKAGE_NAME, VERSION, BUILD);
+	fprintf(stderr, "%s\n\n", LJTCOPYRIGHT);
+	fprintf(stderr, "Based on Independent JPEG Group's libjpeg, version %s\n%s\n\n",
 		JVERSION, JCOPYRIGHT);
 	printed_version = TRUE;
       }
@@ -233,7 +258,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 	usage();
       outfilename = argv[argn];	/* save it away for later use */
 
-    } else if (keymatch(arg, "progressive", 1)) {
+    } else if (keymatch(arg, "perfect", 2)) {
+      /* Fail if there is any partial edge MCUs that the transform can't
+       * handle. */
+      transformoption.perfect = TRUE;
+
+    } else if (keymatch(arg, "progressive", 2)) {
       /* Select simple progressive mode. */
 #ifdef C_PROGRESSIVE_SUPPORTED
       simple_progressive = TRUE;
@@ -342,8 +372,10 @@ main (int argc, char **argv)
   jvirt_barray_ptr * src_coef_arrays;
   jvirt_barray_ptr * dst_coef_arrays;
   int file_index;
-  FILE * input_file;
-  FILE * output_file;
+  /* We assume all-in-memory processing and can therefore use only a
+   * single file pointer for sequential input and output operation. 
+   */
+  FILE * fp;
 
   /* On Mac, fetch a command line. */
 #ifdef USE_CCOMMAND
@@ -406,24 +438,13 @@ main (int argc, char **argv)
 
   /* Open the input file. */
   if (file_index < argc) {
-    if ((input_file = fopen(argv[file_index], READ_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, argv[file_index]);
+    if ((fp = fopen(argv[file_index], READ_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for reading\n", progname, argv[file_index]);
       exit(EXIT_FAILURE);
     }
   } else {
     /* default input file is stdin */
-    input_file = read_stdin();
-  }
-
-  /* Open the output file. */
-  if (outfilename != NULL) {
-    if ((output_file = fopen(outfilename, WRITE_BINARY)) == NULL) {
-      fprintf(stderr, "%s: can't open %s\n", progname, outfilename);
-      exit(EXIT_FAILURE);
-    }
-  } else {
-    /* default output file is stdout */
-    output_file = write_stdout();
+    fp = read_stdin();
   }
 
 #ifdef PROGRESS_REPORT
@@ -431,7 +452,7 @@ main (int argc, char **argv)
 #endif
 
   /* Specify data source for decompression */
-  jpeg_stdio_src(&srcinfo, input_file);
+  jpeg_stdio_src(&srcinfo, fp);
 
   /* Enable saving of extra markers that we want to copy */
   jcopy_markers_setup(&srcinfo, copyoption);
@@ -443,7 +464,12 @@ main (int argc, char **argv)
    * jpeg_read_coefficients so that memory allocation will be done right.
    */
 #if TRANSFORMS_SUPPORTED
-  jtransform_request_workspace(&srcinfo, &transformoption);
+  /* Fail right away if -perfect is given and transformation is not perfect.
+   */
+  if (!jtransform_request_workspace(&srcinfo, &transformoption)) {
+    fprintf(stderr, "%s: transformation is not perfect\n", progname);
+    exit(EXIT_FAILURE);
+  }
 #endif
 
   /* Read source file as DCT coefficients */
@@ -463,11 +489,32 @@ main (int argc, char **argv)
   dst_coef_arrays = src_coef_arrays;
 #endif
 
+  /* Close input file, if we opened it.
+   * Note: we assume that jpeg_read_coefficients consumed all input
+   * until JPEG_REACHED_EOI, and that jpeg_finish_decompress will
+   * only consume more while (! cinfo->inputctl->eoi_reached).
+   * We cannot call jpeg_finish_decompress here since we still need the
+   * virtual arrays allocated from the source object for processing.
+   */
+  if (fp != stdin)
+    fclose(fp);
+
+  /* Open the output file. */
+  if (outfilename != NULL) {
+    if ((fp = fopen(outfilename, WRITE_BINARY)) == NULL) {
+      fprintf(stderr, "%s: can't open %s for writing\n", progname, outfilename);
+      exit(EXIT_FAILURE);
+    }
+  } else {
+    /* default output file is stdout */
+    fp = write_stdout();
+  }
+
   /* Adjust default compression parameters by re-parsing the options */
   file_index = parse_switches(&dstinfo, argc, argv, 0, TRUE);
 
   /* Specify data destination for compression */
-  jpeg_stdio_dest(&dstinfo, output_file);
+  jpeg_stdio_dest(&dstinfo, fp);
 
   /* Start compressor (note no image data is actually written here) */
   jpeg_write_coefficients(&dstinfo, dst_coef_arrays);
@@ -488,11 +535,9 @@ main (int argc, char **argv)
   (void) jpeg_finish_decompress(&srcinfo);
   jpeg_destroy_decompress(&srcinfo);
 
-  /* Close files, if we opened them */
-  if (input_file != stdin)
-    fclose(input_file);
-  if (output_file != stdout)
-    fclose(output_file);
+  /* Close output file, if we opened it */
+  if (fp != stdout)
+    fclose(fp);
 
 #ifdef PROGRESS_REPORT
   end_progress_monitor((j_common_ptr) &dstinfo);

jpegut.c

@@ -1,6 +1,6 @@
 /* Copyright (C)2004 Landmark Graphics Corporation
  * Copyright (C)2005 Sun Microsystems, Inc.
- * Copyright (C)2009 D. R. Commander
+ * Copyright (C)2009-2011 D. R. Commander
  *
  * This library is free software and may be redistributed and/or modified under
  * the terms of the wxWindows Library License, Version 3.1 or (at your option)
@@ -18,11 +18,19 @@
 #include <string.h>
 #include "./rrtimer.h"
 #include "./turbojpeg.h"
+#ifndef _WIN32
+ #define stricmp strcasecmp
+#endif
 
 #define _catch(f) {if((f)==-1) {printf("TJPEG: %s\n", tjGetErrorStr());  bailout();}}
 
 const char *_subnamel[NUMSUBOPT]={"4:4:4", "4:2:2", "4:2:0", "GRAY"};
 const char *_subnames[NUMSUBOPT]={"444", "422", "420", "GRAY"};
+const int _hsf[NUMSUBOPT]={1, 2, 2, 1};
+const int _vsf[NUMSUBOPT]={1, 1, 2, 1};
+
+enum {YUVENCODE=1, YUVDECODE};
+int yuv=0;
 
 int exitstatus=0;
 #define bailout() {exitstatus=-1;  goto finally;}
@@ -46,6 +54,28 @@ void initbuf(unsigned char *buf, int w, int h, int ps, int flags)
 		_i, j;
 	if(flags&TJ_ALPHAFIRST) {roffset++;  goffset++;  boffset++;}
 	memset(buf, 0, w*h*ps);
+	if(ps==1)
+	{
+		for(_i=0; _i<16; _i++)
+		{
+			if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+			for(j=0; j<w; j++)
+			{
+				if(((_i/8)+(j/8))%2==0) buf[w*i+j]=255;
+				else buf[w*i+j]=76;
+			}
+		}
+		for(_i=16; _i<h; _i++)
+		{
+			if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
+			for(j=0; j<w; j++)
+			{
+				if(((_i/8)+(j/8))%2==0) buf[w*i+j]=0;
+				else buf[w*i+j]=226;
+			}
+		}
+		return;
+	}
 	for(_i=0; _i<16; _i++)
 	{
 		if(flags&TJ_BOTTOMUP) i=h-_i-1;  else i=_i;
@@ -77,12 +107,13 @@ void dumpbuf(unsigned char *buf, int w, int h, int ps, int flags)
 {
 	int roffset=(flags&TJ_BGR)?2:0, goffset=1, boffset=(flags&TJ_BGR)?0:2, i,
 		j;
+	printf("\n");
 	for(i=0; i<h; i++)
 	{
 		for(j=0; j<w; j++)
 		{
 			printf("%.3d/%.3d/%.3d ", buf[(w*i+j)*ps+roffset],
-				buf[(w*i+j)*ps+roffset], buf[(w*i+j)*ps+roffset]);
+				buf[(w*i+j)*ps+goffset], buf[(w*i+j)*ps+boffset]);
 		}
 		printf("\n");
 	}
@@ -93,6 +124,7 @@ int checkbuf(unsigned char *buf, int w, int h, int ps, int subsamp, int flags)
 	int roffset=(flags&TJ_BGR)?2:0, goffset=1, boffset=(flags&TJ_BGR)?0:2, i,
 		_i, j;
 	if(flags&TJ_ALPHAFIRST) {roffset++;  goffset++;  boffset++;}
+	if(ps==1) roffset=goffset=boffset=0;
 	if(subsamp==TJ_GRAYSCALE)
 	{
 		for(_i=0; _i<16; _i++)
@@ -174,6 +206,118 @@ int checkbuf(unsigned char *buf, int w, int h, int ps, int subsamp, int flags)
 	return 1;
 }
 
+#define checkval(v, cv) { \
+	if(v<cv-1 || v>cv+1) { \
+		printf("\nComp. %s at %d,%d should be %d, not %d\n", #v, i, j, cv, v); \
+		retval=0;  goto bailout; \
+	}}
+
+#define checkval0(v) { \
+	if(v>1) { \
+		printf("\nComp. %s at %d,%d should be 0, not %d\n", #v, i, j, v); \
+		retval=0;  goto bailout; \
+	}}
+
+#define checkval255(v) { \
+	if(v<254) { \
+		printf("\nComp. %s at %d,%d should be 255, not %d\n", #v, i, j, v); \
+		retval=0;  goto bailout; \
+	}}
+
+#define PAD(v, p) ((v+(p)-1)&(~((p)-1)))
+
+int checkbufyuv(unsigned char *buf, int w, int h, int subsamp)
+{
+	int i, j;
+	int hsf=_hsf[subsamp], vsf=_vsf[subsamp];
+	int pw=PAD(w, hsf), ph=PAD(h, vsf);
+	int cw=pw/hsf, ch=ph/vsf;
+	int ypitch=PAD(pw, 4), uvpitch=PAD(cw, 4);
+	int retval=1;
+
+	for(i=0; i<16; i++)
+	{
+		for(j=0; j<pw; j++)
+		{
+			unsigned char y=buf[ypitch*i+j];
+			if(((i/8)+(j/8))%2==0) checkval255(y)
+			else checkval(y, 76)
+		}
+	}
+	for(i=16; i<ph; i++)
+	{
+		for(j=0; j<pw; j++)
+		{
+			unsigned char y=buf[ypitch*i+j];
+			if(((i/8)+(j/8))%2==0) checkval0(y)
+			else checkval(y, 226)
+		}
+	}
+	if(subsamp!=TJ_GRAYSCALE)
+	{
+		for(i=0; i<16/vsf; i++)
+		{
+			for(j=0; j<cw; j++)
+			{
+				unsigned char u=buf[ypitch*ph + (uvpitch*i+j)],
+					v=buf[ypitch*ph + uvpitch*ch + (uvpitch*i+j)];
+				if(((i*vsf/8)+(j*hsf/8))%2==0)
+				{
+					checkval(u, 128);  checkval(v, 128);
+				}
+				else
+				{
+					checkval(u, 85);  checkval255(v);
+				}
+			}
+		}
+		for(i=16/vsf; i<ch; i++)
+		{
+			for(j=0; j<cw; j++)
+			{
+				unsigned char u=buf[ypitch*ph + (uvpitch*i+j)],
+					v=buf[ypitch*ph + uvpitch*ch + (uvpitch*i+j)];
+				if(((i*vsf/8)+(j*hsf/8))%2==0)
+				{
+					checkval(u, 128);  checkval(v, 128);
+				}
+				else
+				{
+					checkval0(u);  checkval(v, 149);
+				}
+			}
+		}
+	}
+
+	bailout:
+	if(retval==0)
+	{
+		for(i=0; i<ph; i++)
+		{
+			for(j=0; j<pw; j++)
+				printf("%.3d ", buf[ypitch*i+j]);
+			printf("\n");
+		}
+		printf("\n");
+		for(i=0; i<ch; i++)
+		{
+			for(j=0; j<cw; j++)
+				printf("%.3d ", buf[ypitch*ph + (uvpitch*i+j)]);
+			printf("\n");
+		}
+		printf("\n");
+		for(i=0; i<ch; i++)
+		{
+			for(j=0; j<cw; j++)
+				printf("%.3d ", buf[ypitch*ph + uvpitch*ch + (uvpitch*i+j)]);
+			printf("\n");
+		}
+		printf("\n");
+	}
+
+	return retval;
+}
+
 void writejpeg(unsigned char *jpegbuf, unsigned long jpgbufsize, char *filename)
 {
 	FILE *outfile=NULL;
@@ -201,53 +345,86 @@ void gentestjpeg(tjhandle hnd, unsigned char *jpegbuf, unsigned long *size,
 	if(flags&TJ_BGR)
 	{
 		if(ps==3) pixformat="BGR";
-		else {if(flags&TJ_ALPHAFIRST) pixformat="ABGR";  else pixformat="BGRA";}
+		else {if(flags&TJ_ALPHAFIRST) pixformat="XBGR";  else pixformat="BGRX";}
 	}
 	else
 	{
 		if(ps==3) pixformat="RGB";
-		else {if(flags&TJ_ALPHAFIRST) pixformat="ARGB";  else pixformat="RGBA";}
+		else {if(flags&TJ_ALPHAFIRST) pixformat="XRGB";  else pixformat="RGBX";}
 	}
-	printf("%s %s -> %s Q%d ... ", pixformat,
-		(flags&TJ_BOTTOMUP)?"Bottom-Up":"Top-Down ", _subnamel[subsamp], qual);
+	if(ps==1) pixformat="Grayscale";
+	if(yuv==YUVENCODE)
+		printf("%s %s -> %s YUV ... ", pixformat,
+			(flags&TJ_BOTTOMUP)?"Bottom-Up":"Top-Down ", _subnamel[subsamp]);
+	else
+		printf("%s %s -> %s Q%d ... ", pixformat,
+			(flags&TJ_BOTTOMUP)?"Bottom-Up":"Top-Down ", _subnamel[subsamp], qual);
 
 	if((bmpbuf=(unsigned char *)malloc(w*h*ps+1))==NULL)
 	{
 		printf("ERROR: Could not allocate buffer\n");  bailout();
 	}
 	initbuf(bmpbuf, w, h, ps, flags);
-	memset(jpegbuf, 0, TJBUFSIZE(w, h));
+	memset(jpegbuf, 0,
+		yuv==YUVENCODE? TJBUFSIZEYUV(w, h, subsamp):TJBUFSIZE(w, h));
 
 	t=rrtime();
-	_catch(tjCompress(hnd, bmpbuf, w, 0, h, ps, jpegbuf, size, subsamp, qual, flags));
+	if(yuv==YUVENCODE)
+	{
+		_catch(tjEncodeYUV(hnd, bmpbuf, w, 0, h, ps, jpegbuf, subsamp, flags));
+		*size=TJBUFSIZEYUV(w, h, subsamp);
+	}
+	else
+	{
+		_catch(tjCompress(hnd, bmpbuf, w, 0, h, ps, jpegbuf, size, subsamp, qual,
+			flags));
+	}
 	t=rrtime()-t;
 
-	sprintf(tempstr, "%s_enc_%s_%s_%sQ%d.jpg", basefilename, pixformat,
-		(flags&TJ_BOTTOMUP)? "BU":"TD", _subnames[subsamp], qual);
+	if(yuv==YUVENCODE)
+		sprintf(tempstr, "%s_enc_%s_%s_%s.yuv", basefilename, pixformat,
+			(flags&TJ_BOTTOMUP)? "BU":"TD", _subnames[subsamp]);
+	else
+		sprintf(tempstr, "%s_enc_%s_%s_%sQ%d.jpg", basefilename, pixformat,
+			(flags&TJ_BOTTOMUP)? "BU":"TD", _subnames[subsamp], qual);
 	writejpeg(jpegbuf, *size, tempstr);
-	printf("Done.  %f ms\n  Result in %s\n", t*1000., tempstr);
+	if(yuv==YUVENCODE)
+	{
+		if(checkbufyuv(jpegbuf, w, h, subsamp)) printf("Passed.");
+		else {printf("FAILED!");  exitstatus=-1;}
+	}
+	else printf("Done.");
+	printf("  %f ms\n  Result in %s\n", t*1000., tempstr);
 
 	finally:
 	if(bmpbuf) free(bmpbuf);
 }
 
 void gentestbmp(tjhandle hnd, unsigned char *jpegbuf, unsigned long jpegsize,
-	int w, int h, int ps, char *basefilename, int subsamp, int qual, int flags)
+	int w, int h, int ps, char *basefilename, int subsamp, int flags)
 {
 	unsigned char *bmpbuf=NULL;
 	const char *pixformat;  int _w=0, _h=0;  double t;
+	unsigned long size=0;
+
+	if(yuv==YUVENCODE) return;
 
 	if(flags&TJ_BGR)
 	{
 		if(ps==3) pixformat="BGR";
-		else {if(flags&TJ_ALPHAFIRST) pixformat="ABGR";  else pixformat="BGRA";}
+		else {if(flags&TJ_ALPHAFIRST) pixformat="XBGR";  else pixformat="BGRX";}
 	}
 	else
 	{
 		if(ps==3) pixformat="RGB";
-		else {if(flags&TJ_ALPHAFIRST) pixformat="ARGB";  else pixformat="RGBA";}
+		else {if(flags&TJ_ALPHAFIRST) pixformat="XRGB";  else pixformat="RGBX";}
 	}
-	printf("JPEG -> %s %s ... ", pixformat, (flags&TJ_BOTTOMUP)?"Bottom-Up":"Top-Down ");
+	if(ps==1) pixformat="Grayscale";
+	if(yuv==YUVDECODE)
+		printf("JPEG -> YUV %s ... ", _subnames[subsamp]);
+	else
+		printf("JPEG -> %s %s ... ", pixformat,
+			(flags&TJ_BOTTOMUP)?"Bottom-Up":"Top-Down ");
 
 	_catch(tjDecompressHeader(hnd, jpegbuf, jpegsize, &_w, &_h));
 	if(_w!=w || _h!=h)
@@ -255,19 +432,40 @@ void gentestbmp(tjhandle hnd, unsigned char *jpegbuf, unsigned long jpegsize,
 		printf("Incorrect JPEG header\n");  bailout();
 	}
 
-	if((bmpbuf=(unsigned char *)malloc(w*h*ps+1))==NULL)
+	if(yuv==YUVDECODE) size=TJBUFSIZEYUV(w, h, subsamp);
+	else size=w*h*ps+1;
+	if((bmpbuf=(unsigned char *)malloc(size))==NULL)
 	{
 		printf("ERROR: Could not allocate buffer\n");  bailout();
 	}
-	memset(bmpbuf, 0, w*ps*h);
+	memset(bmpbuf, 0, size);
 
 	t=rrtime();
-	_catch(tjDecompress(hnd, jpegbuf, jpegsize, bmpbuf, w, w*ps, h, ps, flags));
+	if(yuv==YUVDECODE)
+	{
+		_catch(tjDecompressToYUV(hnd, jpegbuf, jpegsize, bmpbuf, flags));
+	}
+	else
+	{
+		_catch(tjDecompress(hnd, jpegbuf, jpegsize, bmpbuf, w, w*ps, h, ps,
+			flags));
+	}
 	t=rrtime()-t;
 
-	if(checkbuf(bmpbuf, w, h, ps, subsamp, flags)) printf("Passed.");
-	else {printf("FAILED!");  dumpbuf(bmpbuf, w, h, ps, flags);}
-
+	if(yuv==YUVDECODE)
+	{
+		if(checkbufyuv(bmpbuf, w, h, subsamp)) printf("Passed.");
+		else {printf("FAILED!");  exitstatus=-1;}
+	}
+	else
+	{
+		if(checkbuf(bmpbuf, w, h, ps, subsamp, flags)) printf("Passed.");
+		else
+		{
+			printf("FAILED!");  exitstatus=-1;
+			dumpbuf(bmpbuf, w, h, ps, flags);
+		}
+	}
 	printf("  %f ms\n\n", t*1000.);
 
 	finally:
@@ -279,7 +477,8 @@ void dotest(int w, int h, int ps, int subsamp, char *basefilename)
 	tjhandle hnd=NULL, dhnd=NULL;  unsigned char *jpegbuf=NULL;
 	unsigned long size;
 
-	if((jpegbuf=(unsigned char *)malloc(TJBUFSIZE(w, h))) == NULL)
+	size=(yuv==YUVENCODE? TJBUFSIZEYUV(w, h, subsamp):TJBUFSIZE(w, h));
+	if((jpegbuf=(unsigned char *)malloc(size)) == NULL)
 	{
 		puts("ERROR: Could not allocate buffer.");  bailout();
 	}
@@ -290,30 +489,32 @@ void dotest(int w, int h, int ps, int subsamp, char *basefilename)
 		{printf("Error in tjInitDecompress():\n%s\n", tjGetErrorStr());  bailout();}
 
 	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, 0);
-	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, 0);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 0);
+
+	if(ps==1 || yuv==YUVDECODE) goto finally;
 
 	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_BGR);
-	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_BGR);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, TJ_BGR);
 
 	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_BOTTOMUP);
-	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_BOTTOMUP);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, TJ_BOTTOMUP);
 
 	gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_BGR|TJ_BOTTOMUP);
-	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_BGR|TJ_BOTTOMUP);
+	gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, TJ_BGR|TJ_BOTTOMUP);
 
 	if(ps==4)
 	{
 		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST);
-		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, TJ_ALPHAFIRST);
 
 		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR);
-		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, TJ_ALPHAFIRST|TJ_BGR);
 
 		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BOTTOMUP);
-		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BOTTOMUP);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, TJ_ALPHAFIRST|TJ_BOTTOMUP);
 
 		gentestjpeg(hnd, jpegbuf, &size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR|TJ_BOTTOMUP);
-		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, 100, TJ_ALPHAFIRST|TJ_BGR|TJ_BOTTOMUP);
+		gentestbmp(dhnd, jpegbuf, size, w, h, ps, basefilename, subsamp, TJ_ALPHAFIRST|TJ_BGR|TJ_BOTTOMUP);
 	}
 
 	finally:
@@ -347,9 +548,9 @@ void dotest1(void)
 			{
 				bmpbuf[i2*4]=pixels[i2%9][2];
 				bmpbuf[i2*4+1]=pixels[i2%9][1];
-				bmpbuf[i2*2+2]=pixels[i2%9][0];
+				bmpbuf[i2*4+2]=pixels[i2%9][0];
 			}
-			_catch(tjCompress(hnd, bmpbuf, i, i*4, j, 4,
+			_catch(tjCompress(hnd, bmpbuf, i, 0, j, 4,
 				jpgbuf, &size, TJ_444, 100, TJ_BGR));
 			free(bmpbuf);  bmpbuf=NULL;  free(jpgbuf);  jpgbuf=NULL;
 
@@ -358,12 +559,12 @@ void dotest1(void)
 			{
 				printf("Memory allocation failure\n");  bailout();
 			}
-			for(i2=0; i2<j*i*4; i2++)
+			for(i2=0; i2<j*i; i2++)
 			{
-				if(i2%2==0) bmpbuf[i2]=0xFF;
-				else bmpbuf[i2]=0;
+				if(i2%2==0) bmpbuf[i2*4]=bmpbuf[i2*4+1]=bmpbuf[i2*4+2]=0xFF;
+				else bmpbuf[i2*4]=bmpbuf[i2*4+1]=bmpbuf[i2*4+2]=0;
 			}
-			_catch(tjCompress(hnd, bmpbuf, j, j*4, i, 4,
+			_catch(tjCompress(hnd, bmpbuf, j, 0, i, 4,
 				jpgbuf, &size, TJ_444, 100, TJ_BGR));
 			free(bmpbuf);  bmpbuf=NULL;  free(jpgbuf);  jpgbuf=NULL;
 		}
@@ -377,11 +578,36 @@ void dotest1(void)
 
 int main(int argc, char *argv[])
 {
-	dotest(35, 41, 3, TJ_444, "test");
-	dotest(35, 41, 4, TJ_444, "test");
-	dotest(35, 41, 3, TJ_GRAYSCALE, "test");
-	dotest(35, 41, 4, TJ_GRAYSCALE, "test");
-	dotest1();
+	int doyuv=0;
+	if(argc>1 && !stricmp(argv[1], "-yuv")) doyuv=1;
+	if(doyuv) yuv=YUVENCODE;
+	dotest(35, 39, 3, TJ_444, "test");
+	dotest(39, 41, 4, TJ_444, "test");
+	if(doyuv)
+	{
+		dotest(41, 35, 3, TJ_422, "test");
+		dotest(35, 39, 4, TJ_422, "test");
+		dotest(39, 41, 3, TJ_420, "test");
+		dotest(41, 35, 4, TJ_420, "test");
+	}
+	dotest(35, 39, 1, TJ_GRAYSCALE, "test");
+	dotest(39, 41, 3, TJ_GRAYSCALE, "test");
+	dotest(41, 35, 4, TJ_GRAYSCALE, "test");
+	if(!doyuv) dotest1();
+	if(doyuv)
+	{
+		yuv=YUVDECODE;
+		dotest(48, 48, 3, TJ_444, "test");
+		dotest(35, 39, 3, TJ_444, "test");
+		dotest(48, 48, 3, TJ_422, "test");
+		dotest(39, 41, 3, TJ_422, "test");
+		dotest(48, 48, 3, TJ_420, "test");
+		dotest(41, 35, 3, TJ_420, "test");
+		dotest(48, 48, 3, TJ_GRAYSCALE, "test");
+		dotest(35, 39, 3, TJ_GRAYSCALE, "test");
+		dotest(48, 48, 1, TJ_GRAYSCALE, "test");
+		dotest(39, 41, 1, TJ_GRAYSCALE, "test");
+	}
 
 	return exitstatus;
 }

jpgtest.c

@@ -0,0 +1,610 @@
+/* Copyright (C)2004 Landmark Graphics Corporation
+ * Copyright (C)2005, 2006 Sun Microsystems, Inc.
+ * Copyright (C)2009-2011 D. R. Commander
+ *
+ * This library is free software and may be redistributed and/or modified under
+ * the terms of the wxWindows Library License, Version 3.1 or (at your option)
+ * any later version.  The full license is in the LICENSE.txt file included
+ * with this distribution.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * wxWindows Library License for more details.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <math.h>
+#include <errno.h>
+#include "./bmp.h"
+#include "./rrutil.h"
+#include "./rrtimer.h"
+#include "./turbojpeg.h"
+
+#define _throw(op, err) {  \
+	printf("ERROR in line %d while %s:\n%s\n", __LINE__, op, err);  goto bailout;}
+#define _throwunix(m) _throw(m, strerror(errno))
+#define _throwtj(m) _throw(m, tjGetErrorStr())
+#define _throwbmp(m) _throw(m, bmpgeterr())
+
+#define PAD(v, p) ((v+(p)-1)&(~((p)-1)))
+
+enum {YUVENCODE=1, YUVDECODE};
+int forcemmx=0, forcesse=0, forcesse2=0, forcesse3=0, fastupsample=0,
+	decomponly=0, yuv=0;
+const int _ps[BMPPIXELFORMATS]={3, 4, 3, 4, 4, 4};
+const int _flags[BMPPIXELFORMATS]={0, 0, TJ_BGR, TJ_BGR,
+	TJ_BGR|TJ_ALPHAFIRST, TJ_ALPHAFIRST};
+const int _rindex[BMPPIXELFORMATS]={0, 0, 2, 2, 3, 1};
+const int _gindex[BMPPIXELFORMATS]={1, 1, 1, 1, 2, 2};
+const int _bindex[BMPPIXELFORMATS]={2, 2, 0, 0, 1, 3};
+const char *_pfname[]={"RGB", "RGBX", "BGR", "BGRX", "XBGR", "XRGB"};
+const char *_subnamel[NUMSUBOPT]={"4:4:4", "4:2:2", "4:2:0", "GRAY"};
+const char *_subnames[NUMSUBOPT]={"444", "422", "420", "GRAY"};
+
+void printsigfig(double val, int figs)
+{
+	char format[80];
+	double _l=log10(val);  int l;
+	if(_l<0.)
+	{
+		l=(int)fabs(_l);
+		sprintf(format, "%%%d.%df", figs+l+2, figs+l);
+	}
+	else
+	{
+		l=(int)_l+1;
+		if(figs<=l) sprintf(format, "%%.0f");
+		else sprintf(format, "%%%d.%df", figs+1, figs-l);
+	}	
+	printf(format, val);
+}
+
+void dotest(unsigned char *srcbuf, int w, int h, int pf, int bu,
+	int jpegsub, int qual, char *filename, int dotile, int useppm, int quiet)
+{
+	char tempstr[1024];
+	FILE *outfile=NULL;  tjhandle hnd=NULL;
+	unsigned char **jpegbuf=NULL, *rgbbuf=NULL;
+	double start, elapsed;
+	int jpgbufsize=0, i, j, tilesizex=w, tilesizey=h, numtilesx=1, numtilesy=1,
+		ITER;
+	unsigned long *comptilesize=NULL;
+	int flags=(forcemmx?TJ_FORCEMMX:0)|(forcesse?TJ_FORCESSE:0)
+		|(forcesse2?TJ_FORCESSE2:0)|(forcesse3?TJ_FORCESSE3:0)
+		|(fastupsample?TJ_FASTUPSAMPLE:0);
+	int ps=_ps[pf], tilen;
+	int pitch=w*ps, yuvsize=0;
+
+	flags |= _flags[pf];
+	if(bu) flags |= TJ_BOTTOMUP;
+
+	if(yuv==YUVENCODE) yuvsize=TJBUFSIZEYUV(w, h, jpegsub);
+	if((rgbbuf=(unsigned char *)malloc(max(yuvsize, pitch*h+1))) == NULL)
+		_throwunix("allocating image buffer");
+
+	if(!quiet)
+	{
+		if(yuv==YUVENCODE)
+			printf(">>>>>  %s (%s) <--> YUV %s  <<<<<\n", _pfname[pf],
+				bu?"Bottom-up":"Top-down", _subnamel[jpegsub]);
+		else
+			printf(">>>>>  %s (%s) <--> JPEG %s Q%d  <<<<<\n", _pfname[pf],
+				bu?"Bottom-up":"Top-down", _subnamel[jpegsub], qual);
+	}
+	if(yuv) dotile=0;
+	if(dotile) {tilesizex=tilesizey=4;}  else {tilesizex=w;  tilesizey=h;}
+
+	do
+	{
+		tilesizex*=2;  if(tilesizex>w) tilesizex=w;
+		tilesizey*=2;  if(tilesizey>h) tilesizey=h;
+		numtilesx=(w+tilesizex-1)/tilesizex;
+		numtilesy=(h+tilesizey-1)/tilesizey;
+		if((comptilesize=(unsigned long *)malloc(sizeof(unsigned long)*numtilesx*numtilesy)) == NULL
+		|| (jpegbuf=(unsigned char **)malloc(sizeof(unsigned char *)*numtilesx*numtilesy)) == NULL)
+			_throwunix("allocating image buffers");
+		memset(jpegbuf, 0, sizeof(unsigned char *)*numtilesx*numtilesy);
+		for(i=0; i<numtilesx*numtilesy; i++)
+		{
+			if((jpegbuf[i]=(unsigned char *)malloc(
+				yuv==YUVENCODE? TJBUFSIZEYUV(tilesizex, tilesizey, jpegsub)
+					: TJBUFSIZE(tilesizex, tilesizey))) == NULL)
+				_throwunix("allocating image buffers");
+		}
+
+		// Compression test
+		if(quiet==1) printf("%s\t%s\t%s\t%d\t",  _pfname[pf], bu?"BU":"TD",
+			_subnamel[jpegsub], qual);
+		for(i=0; i<h; i++) memcpy(&rgbbuf[pitch*i], &srcbuf[w*ps*i], w*ps);
+		if((hnd=tjInitCompress())==NULL)
+			_throwtj("executing tjInitCompress()");
+		if(yuv==YUVENCODE)
+		{
+			if(tjEncodeYUV(hnd, rgbbuf, tilesizex, pitch, tilesizey, ps,
+				jpegbuf[0], jpegsub, flags)==-1)
+				_throwtj("executing tjEncodeYUV()");
+			comptilesize[0]=TJBUFSIZEYUV(tilesizex, tilesizey, jpegsub);
+		}
+		else if(tjCompress(hnd, rgbbuf, tilesizex, pitch, tilesizey, ps,
+			jpegbuf[0], &comptilesize[0], jpegsub, qual, flags)==-1)
+			_throwtj("executing tjCompress()");
+		ITER=0;
+		start=rrtime();
+		do
+		{
+			jpgbufsize=0;  tilen=0;
+			for(i=0; i<h; i+=tilesizey)
+			{
+				for(j=0; j<w; j+=tilesizex)
+				{
+					int tempw=min(tilesizex, w-j), temph=min(tilesizey, h-i);
+					if(yuv==YUVENCODE)
+					{
+						if(tjEncodeYUV(hnd, &rgbbuf[pitch*i+j*ps], tempw, pitch,
+							temph, ps, jpegbuf[tilen], jpegsub, flags)==-1)
+							_throwtj("executing tjEncodeYUV()");
+						comptilesize[tilen]=TJBUFSIZEYUV(tempw, temph, jpegsub);
+					}
+					else if(tjCompress(hnd, &rgbbuf[pitch*i+j*ps], tempw, pitch,
+						temph, ps, jpegbuf[tilen], &comptilesize[tilen], jpegsub, qual,
+						flags)==-1)
+						_throwtj("executing tjCompress()");
+					jpgbufsize+=comptilesize[tilen];
+					tilen++;
+				}
+			}
+			ITER++;
+		} while((elapsed=rrtime()-start)<5.);
+		if(tjDestroy(hnd)==-1) _throwtj("executing tjDestroy()");
+		hnd=NULL;
+		if(quiet==1)
+		{
+			if(tilesizex==w && tilesizey==h) printf("Full     \t");
+			else printf("%-4d %-4d\t", tilesizex, tilesizey);
+		}
+		if(quiet)
+		{
+			printsigfig((double)(w*h)/1000000.*(double)ITER/elapsed, 4);
+			printf("%c", quiet==2? '\n':'\t');
+			printsigfig((double)(w*h*ps)/(double)jpgbufsize, 4);
+			printf("%c", quiet==2? '\n':'\t');
+		}
+		else
+		{
+			if(tilesizex==w && tilesizey==h) printf("\nFull image\n");
+			else printf("\nTile size: %d x %d\n", tilesizex, tilesizey);
+			printf("C--> Frame rate:           %f fps\n", (double)ITER/elapsed);
+			printf("     Output image size:    %d bytes\n", jpgbufsize);
+			printf("     Compression ratio:    %f:1\n",
+				(double)(w*h*ps)/(double)jpgbufsize);
+			printf("     Source throughput:    %f Megapixels/sec\n",
+				(double)(w*h)/1000000.*(double)ITER/elapsed);
+			printf("     Output bit stream:    %f Megabits/sec\n",
+				(double)jpgbufsize*8./1000000.*(double)ITER/elapsed);
+		}
+		if(tilesizex==w && tilesizey==h)
+		{
+			if(yuv==YUVENCODE)
+				sprintf(tempstr, "%s_%s.yuv", filename, _subnames[jpegsub]);
+			else
+				sprintf(tempstr, "%s_%sQ%d.jpg", filename, _subnames[jpegsub], qual);
+			if((outfile=fopen(tempstr, "wb"))==NULL)
+				_throwunix("opening reference image");
+			if(fwrite(jpegbuf[0], jpgbufsize, 1, outfile)!=1)
+				_throwunix("writing reference image");
+			fclose(outfile);  outfile=NULL;
+			if(!quiet) printf("Reference image written to %s\n", tempstr);
+		}
+		if(yuv==YUVENCODE)
+		{
+			if(quiet==1) printf("\n");  goto bailout;
+		}
+
+		// Decompression test
+		memset(rgbbuf, 127, max(yuvsize, pitch*h));  // Grey image means decompressor did nothing
+		if((hnd=tjInitDecompress())==NULL)
+			_throwtj("executing tjInitDecompress()");
+		if(yuv==YUVDECODE)
+		{
+			if(tjDecompressToYUV(hnd, jpegbuf[0], jpgbufsize, rgbbuf, flags)==-1)
+				_throwtj("executing tjDecompressToYUV()");
+		}
+		else if(tjDecompress(hnd, jpegbuf[0], jpgbufsize, rgbbuf, tilesizex, pitch,
+			tilesizey, ps, flags)==-1)
+			_throwtj("executing tjDecompress()");
+		ITER=0;
+		start=rrtime();
+		do
+		{
+			int tilen=0;
+			for(i=0; i<h; i+=tilesizey)
+			{
+				for(j=0; j<w; j+=tilesizex)
+				{
+					int tempw=min(tilesizex, w-j), temph=min(tilesizey, h-i);
+					if(yuv==YUVDECODE)
+					{
+						if(tjDecompressToYUV(hnd, jpegbuf[tilen], comptilesize[tilen],
+							&rgbbuf[pitch*i+ps*j], flags)==-1)
+							_throwtj("executing tjDecompressToYUV()");
+					}
+					else if(tjDecompress(hnd, jpegbuf[tilen], comptilesize[tilen],
+						&rgbbuf[pitch*i+ps*j], tempw, pitch, temph, ps, flags)==-1)
+						_throwtj("executing tjDecompress()");
+					tilen++;
+				}
+			}
+			ITER++;
+		}	while((elapsed=rrtime()-start)<5.);
+		if(tjDestroy(hnd)==-1) _throwtj("executing tjDestroy()");
+		hnd=NULL;
+		if(quiet)
+		{
+			printsigfig((double)(w*h)/1000000.*(double)ITER/elapsed, 4);
+			printf("\n");
+		}
+		else
+		{
+			printf("D--> Frame rate:           %f fps\n", (double)ITER/elapsed);
+			printf("     Dest. throughput:     %f Megapixels/sec\n",
+				(double)(w*h)/1000000.*(double)ITER/elapsed);
+		}
+		if(yuv==YUVDECODE)
+		{
+			sprintf(tempstr, "%s_%sQ%d.yuv", filename, _subnames[jpegsub], qual);
+			if((outfile=fopen(tempstr, "wb"))==NULL)
+				_throwunix("opening YUV image for output");
+			if(fwrite(rgbbuf, yuvsize, 1, outfile)!=1)
+				_throwunix("writing YUV image");
+			fclose(outfile);  outfile=NULL;
+		}
+		else
+		{
+			if(tilesizex==w && tilesizey==h)
+				sprintf(tempstr, "%s_%sQ%d_full.%s", filename, _subnames[jpegsub], qual,
+					useppm?"ppm":"bmp");
+			else sprintf(tempstr, "%s_%sQ%d_%dx%d.%s", filename, _subnames[jpegsub],
+				qual, tilesizex, tilesizey, useppm?"ppm":"bmp");
+			if(savebmp(tempstr, rgbbuf, w, h, pf, pitch, bu)==-1)
+				_throwbmp("saving bitmap");
+			sprintf(strrchr(tempstr, '.'), "-err.%s", useppm?"ppm":"bmp");
+			if(!quiet)
+				printf("Computing compression error and saving to %s.\n", tempstr);
+			if(jpegsub==TJ_GRAYSCALE)
+			{
+				for(j=0; j<h; j++)
+				{
+					for(i=0; i<w*ps; i+=ps)
+					{
+						int y=(int)((double)srcbuf[w*ps*j+i+_rindex[pf]]*0.299
+							+ (double)srcbuf[w*ps*j+i+_gindex[pf]]*0.587
+							+ (double)srcbuf[w*ps*j+i+_bindex[pf]]*0.114 + 0.5);
+						if(y>255) y=255;  if(y<0) y=0;
+						rgbbuf[pitch*j+i+_rindex[pf]]=abs(rgbbuf[pitch*j+i+_rindex[pf]]-y);
+						rgbbuf[pitch*j+i+_gindex[pf]]=abs(rgbbuf[pitch*j+i+_gindex[pf]]-y);
+						rgbbuf[pitch*j+i+_bindex[pf]]=abs(rgbbuf[pitch*j+i+_bindex[pf]]-y);
+					}
+				}
+			}		
+			else
+			{
+				for(j=0; j<h; j++) for(i=0; i<w*ps; i++)
+					rgbbuf[pitch*j+i]=abs(rgbbuf[pitch*j+i]-srcbuf[w*ps*j+i]);
+			}
+			if(savebmp(tempstr, rgbbuf, w, h, pf, pitch, bu)==-1)
+				_throwbmp("saving bitmap");
+		}
+
+		// Cleanup
+		if(outfile) {fclose(outfile);  outfile=NULL;}
+		if(jpegbuf)
+		{
+			for(i=0; i<numtilesx*numtilesy; i++)
+				{if(jpegbuf[i]) free(jpegbuf[i]);  jpegbuf[i]=NULL;}
+			free(jpegbuf);  jpegbuf=NULL;
+		}
+		if(comptilesize) {free(comptilesize);  comptilesize=NULL;}
+	} while(tilesizex<w || tilesizey<h);
+
+	if(rgbbuf) {free(rgbbuf);  rgbbuf=NULL;}
+	return;
+
+	bailout:
+	if(outfile) {fclose(outfile);  outfile=NULL;}
+	if(jpegbuf)
+	{
+		for(i=0; i<numtilesx*numtilesy; i++)
+			{if(jpegbuf[i]) free(jpegbuf[i]);  jpegbuf[i]=NULL;}
+		free(jpegbuf);  jpegbuf=NULL;
+	}
+	if(comptilesize) {free(comptilesize);  comptilesize=NULL;}
+	if(rgbbuf) {free(rgbbuf);  rgbbuf=NULL;}
+	if(hnd) {tjDestroy(hnd);  hnd=NULL;}
+	return;
+}
+
+
+void dodecomptest(char *filename, int pf, int bu, int useppm,
+	int quiet)
+{
+	char tempstr[1024];
+	FILE *file=NULL;  tjhandle hnd=NULL;
+	unsigned char *jpegbuf=NULL, *rgbbuf=NULL;
+	double start, elapsed;
+	int w, h, ITER;
+	unsigned long jpgbufsize=0;
+	int flags=(forcemmx?TJ_FORCEMMX:0)|(forcesse?TJ_FORCESSE:0)
+		|(forcesse2?TJ_FORCESSE2:0)|(forcesse3?TJ_FORCESSE3:0)
+		|(fastupsample?TJ_FASTUPSAMPLE:0);
+	int ps=_ps[pf], pitch, jpegsub=-1;
+	char *temp=NULL;
+	int yuvsize, bufsize;
+
+	flags |= _flags[pf];
+	if(bu) flags |= TJ_BOTTOMUP;
+
+	if((file=fopen(filename, "rb"))==NULL)
+		_throwunix("opening file");
+	if(fseek(file, 0, SEEK_END)<0 || (jpgbufsize=ftell(file))<0)
+		_throwunix("determining file size");
+	if((jpegbuf=(unsigned char *)malloc(jpgbufsize))==NULL)
+		_throwunix("allocating memory");
+	if(fseek(file, 0, SEEK_SET)<0)
+		_throwunix("setting file position");
+	if(fread(jpegbuf, jpgbufsize, 1, file)<1)
+		_throwunix("reading JPEG data");
+	fclose(file);  file=NULL;
+
+	temp=strrchr(filename, '.');
+	if(temp!=NULL) *temp='\0';
+
+	if((hnd=tjInitDecompress())==NULL) _throwtj("executing tjInitDecompress()");
+	if(tjDecompressHeader2(hnd, jpegbuf, jpgbufsize, &w, &h, &jpegsub)==-1)
+		_throwtj("executing tjDecompressHeader2()");
+
+	yuvsize=TJBUFSIZEYUV(w, h, jpegsub);
+
+	pitch=w*ps;
+
+	if(quiet==1)
+	{
+		printf("All performance values in Mpixels/sec\n\n");
+		printf("Bitmap\tBitmap\tImage Size\tDecomp\n"),
+		printf("Format\tOrder\t X    Y  \tPerf\n\n");
+		printf("%s\t%s\t%-4d %-4d\t", _pfname[pf], bu?"BU":"TD", w, h);
+	}
+
+	bufsize=(yuv==YUVDECODE? yuvsize:pitch*h);
+	if((rgbbuf=(unsigned char *)malloc(bufsize))==NULL)
+		_throwunix("allocating image buffer");
+
+	if(!quiet)
+	{
+		if(yuv==YUVDECODE)
+			printf(">>>>>  JPEG --> YUV %s  <<<<<\n", _subnamel[jpegsub]);
+		else
+			printf(">>>>>  JPEG --> %s (%s)  <<<<<\n", _pfname[pf],
+				bu?"Bottom-up":"Top-down");
+		printf("\nImage size: %d x %d\n", w, h);
+	}
+
+	memset(rgbbuf, 127, bufsize);  // Grey image means decompressor did nothing
+	if(yuv==YUVDECODE)
+	{
+		if(tjDecompressToYUV(hnd, jpegbuf, jpgbufsize, rgbbuf, flags)==-1)
+			_throwtj("executing tjDecompressToYUV()");
+	}
+	else if(tjDecompress(hnd, jpegbuf, jpgbufsize, rgbbuf, w, pitch, h, ps,
+		flags)==-1)
+		_throwtj("executing tjDecompress()");
+	ITER=0;
+	start=rrtime();
+	do
+	{
+		if(yuv==YUVDECODE)
+		{
+			if(tjDecompressToYUV(hnd, jpegbuf, jpgbufsize, rgbbuf, flags)==-1)
+				_throwtj("executing tjDecompressToYUV()");
+		}
+		else if(tjDecompress(hnd, jpegbuf, jpgbufsize, rgbbuf, w, pitch, h, ps,
+			flags)==-1)
+			_throwtj("executing tjDecompress()");
+		ITER++;
+	}	while((elapsed=rrtime()-start)<5.);
+	if(tjDestroy(hnd)==-1) _throwtj("executing tjDestroy()");
+	hnd=NULL;
+	if(quiet)
+	{
+		printsigfig((double)(w*h)/1000000.*(double)ITER/elapsed, 4);
+		printf("\n");
+	}
+	else
+	{
+		printf("D--> Frame rate:           %f fps\n", (double)ITER/elapsed);
+		printf("     Dest. throughput:     %f Megapixels/sec\n",
+			(double)(w*h)/1000000.*(double)ITER/elapsed);
+	}
+	sprintf(tempstr, "%s_full.%s", filename, useppm?"ppm":"bmp");
+	if(yuv==YUVDECODE)
+	{
+		sprintf(tempstr, "%s_%s.yuv", filename, _subnames[jpegsub]);
+		if((file=fopen(tempstr, "wb"))==NULL)
+			_throwunix("opening YUV image for output");
+		if(fwrite(rgbbuf, yuvsize, 1, file)!=1)
+			_throwunix("writing YUV image");
+		fclose(file);  file=NULL;
+	}
+	else
+	{
+		if(savebmp(tempstr, rgbbuf, w, h, pf, pitch, bu)==-1)
+			_throwbmp("saving bitmap");
+	}
+
+	bailout:
+	if(file) {fclose(file);  file=NULL;}
+	if(jpegbuf) {free(jpegbuf);  jpegbuf=NULL;}
+	if(rgbbuf) {free(rgbbuf);  rgbbuf=NULL;}
+	if(hnd) {tjDestroy(hnd);  hnd=NULL;}
+	return;
+}
+
+
+void usage(char *progname)
+{
+	printf("USAGE: %s <Inputfile (BMP|PPM))> <%% Quality>\n", progname);
+	printf("       %s <Inputfile (JPG))>\n\n", progname);
+	printf("       [-tile]\n");
+	printf("       Test performance of the codec when the image is encoded\n");
+	printf("       as separate tiles of varying sizes.\n\n");
+	printf("       [-forcemmx] [-forcesse] [-forcesse2] [-forcesse3]\n");
+	printf("       Force MMX, SSE, SSE2, or SSE3 code paths in the underlying codec\n\n");
+	printf("       [-rgb | -bgr | -rgbx | -bgrx | -xbgr | -xrgb]\n");
+	printf("       Test the specified color conversion path in the codec (default: BGR)\n\n");
+	printf("       [-fastupsample]\n");
+	printf("       Use fast, inaccurate upsampling code to perform 4:2:2 and 4:2:0\n");
+	printf("       YUV decoding in libjpeg decompressor\n\n");
+	printf("       [-quiet]\n");
+	printf("       Output in tabular rather than verbose format\n\n");
+	printf("       [-yuvencode]\n");
+	printf("       Encode RGB input as planar YUV rather than compressing as JPEG\n\n");
+	printf("       [-yuvdecode]\n");
+	printf("       Decode JPEG image to planar YUV rather than RGB\n\n");
+	printf("       NOTE: If the quality is specified as a range, i.e. 90-100, a separate\n");
+	printf("       test will be performed for all quality values in the range.\n");
+	exit(1);
+}
+
+
+int main(int argc, char *argv[])
+{
+	unsigned char *bmpbuf=NULL;  int w, h, i, useppm=0;
+	int qual=-1, dotile=0, quiet=0, hiqual=-1;  char *temp;
+	int pf=BMP_BGR;
+	int bu=0, minarg=2;
+
+	if(argc<minarg) usage(argv[0]);
+
+	temp=strrchr(argv[1], '.');
+	if(temp!=NULL)
+	{
+		if(!stricmp(temp, ".ppm")) useppm=1;
+		if(!stricmp(temp, ".jpg") || !stricmp(temp, ".jpeg")) decomponly=1;
+	}
+
+	printf("\n");
+
+	if(argc>minarg)
+	{
+		for(i=minarg; i<argc; i++)
+		{
+			if(!stricmp(argv[i], "-yuvencode"))
+			{
+				printf("Testing YUV planar encoding\n\n");
+				yuv=YUVENCODE;  hiqual=qual=100;
+			}
+			if(!stricmp(argv[i], "-yuvdecode"))
+			{
+				printf("Testing YUV planar decoding\n\n");
+				yuv=YUVDECODE;
+			}
+		}
+	}
+
+	if(!decomponly && yuv!=YUVENCODE)
+	{
+		minarg=3;
+		if(argc<minarg) usage(argv[0]);
+		if((qual=atoi(argv[2]))<1 || qual>100)
+		{
+			puts("ERROR: Quality must be between 1 and 100.");
+			exit(1);
+		}
+		if((temp=strchr(argv[2], '-'))!=NULL && strlen(temp)>1
+			&& sscanf(&temp[1], "%d", &hiqual)==1 && hiqual>qual && hiqual>=1
+			&& hiqual<=100) {}
+		else hiqual=qual;
+	}
+
+	if(argc>minarg)
+	{
+		for(i=minarg; i<argc; i++)
+		{
+			if(!stricmp(argv[i], "-tile")) dotile=1;
+			if(!stricmp(argv[i], "-forcesse3"))
+			{
+				printf("Using SSE3 code\n\n");
+				forcesse3=1;
+			}
+			if(!stricmp(argv[i], "-forcesse2"))
+			{
+				printf("Using SSE2 code\n\n");
+				forcesse2=1;
+			}
+			if(!stricmp(argv[i], "-forcesse"))
+			{
+				printf("Using SSE code\n\n");
+				forcesse=1;
+			}
+			if(!stricmp(argv[i], "-forcemmx"))
+			{
+				printf("Using MMX code\n\n");
+				forcemmx=1;
+			}
+			if(!stricmp(argv[i], "-fastupsample"))
+			{
+				printf("Using fast upsampling code\n\n");
+				fastupsample=1;
+			}
+			if(!stricmp(argv[i], "-rgb")) pf=BMP_RGB;
+			if(!stricmp(argv[i], "-rgbx")) pf=BMP_RGBX;
+			if(!stricmp(argv[i], "-bgr")) pf=BMP_BGR;
+			if(!stricmp(argv[i], "-bgrx")) pf=BMP_BGRX;
+			if(!stricmp(argv[i], "-xbgr")) pf=BMP_XBGR;
+			if(!stricmp(argv[i], "-xrgb")) pf=BMP_XRGB;
+			if(!stricmp(argv[i], "-bottomup")) bu=1;
+			if(!stricmp(argv[i], "-quiet")) quiet=1;
+			if(!stricmp(argv[i], "-qq")) quiet=2;
+		}
+	}
+
+	if(!decomponly)
+	{
+		if(loadbmp(argv[1], &bmpbuf, &w, &h, pf, 1, bu)==-1)
+			_throwbmp("loading bitmap");
+		temp=strrchr(argv[1], '.');
+		if(temp!=NULL) *temp='\0';
+	}
+
+	if(quiet==1 && !decomponly)
+	{
+		printf("All performance values in Mpixels/sec\n\n");
+		printf("Bitmap\tBitmap\tJPEG\tJPEG\tTile Size\tCompr\tCompr\tDecomp\n");
+		printf("Format\tOrder\tFormat\tQual\t X    Y  \tPerf \tRatio\tPerf\n\n");
+	}
+
+	if(decomponly)
+	{
+		dodecomptest(argv[1], pf, bu, 1, quiet);
+		printf("\n");
+		goto bailout;
+	}
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_GRAYSCALE, i, argv[1], dotile, useppm, quiet);
+	printf("\n");
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_420, i, argv[1], dotile, useppm, quiet);
+	printf("\n");
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_422, i, argv[1], dotile, useppm, quiet);
+	printf("\n");
+	for(i=hiqual; i>=qual; i--)
+		dotest(bmpbuf, w, h, pf, bu, TJ_444, i, argv[1], dotile, useppm, quiet);
+	printf("\n");
+
+	bailout:
+	if(bmpbuf) free(bmpbuf);
+	return 0;
+}

jpgtest.cxx

@@ -1,392 +0,0 @@
-/* Copyright (C)2004 Landmark Graphics Corporation
- * Copyright (C)2005, 2006 Sun Microsystems, Inc.
- * Copyright (C)2009 D. R. Commander
- *
- * This library is free software and may be redistributed and/or modified under
- * the terms of the wxWindows Library License, Version 3.1 or (at your option)
- * any later version.  The full license is in the LICENSE.txt file included
- * with this distribution.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * wxWindows Library License for more details.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <math.h>
-#include "./bmp.h"
-#include "./rrutil.h"
-#include "./rrtimer.h"
-#include "./turbojpeg.h"
-
-#define _catch(f) {if((f)==-1) {printf("Error in %s:\n%s\n", #f, tjGetErrorStr());  goto bailout;}}
-
-int forcemmx=0, forcesse=0, forcesse2=0, forcesse3=0, fastupsample=0;
-const int _ps[BMPPIXELFORMATS]={3, 4, 3, 4, 4, 4};
-const int _flags[BMPPIXELFORMATS]={0, 0, TJ_BGR, TJ_BGR,
-	TJ_BGR|TJ_ALPHAFIRST, TJ_ALPHAFIRST};
-const int _rindex[BMPPIXELFORMATS]={0, 0, 2, 2, 3, 1};
-const int _gindex[BMPPIXELFORMATS]={1, 1, 1, 1, 2, 2};
-const int _bindex[BMPPIXELFORMATS]={2, 2, 0, 0, 1, 3};
-const char *_pfname[]={"RGB", "RGBA", "BGR", "BGRA", "ABGR", "ARGB"};
-const char *_subnamel[NUMSUBOPT]={"4:4:4", "4:2:2", "4:2:0", "GRAY"};
-const char *_subnames[NUMSUBOPT]={"444", "422", "420", "GRAY"};
-
-void printsigfig(double val, int figs)
-{
-	char format[80];
-	double _l=log10(val);  int l;
-	if(_l<0.)
-	{
-		l=(int)fabs(_l);
-		sprintf(format, "%%%d.%df", figs+l+2, figs+l);
-	}
-	else
-	{
-		l=(int)_l+1;
-		if(figs<=l) sprintf(format, "%%.0f");
-		else sprintf(format, "%%%d.%df", figs+1, figs-l);
-	}	
-	printf(format, val);
-}
-
-void dotest(unsigned char *srcbuf, int w, int h, BMPPIXELFORMAT pf, int bu,
-	int jpegsub, int qual, char *filename, int dotile, int useppm, int quiet)
-{
-	char tempstr[1024];
-	FILE *outfile;  tjhandle hnd;
-	unsigned char **jpegbuf=NULL, *rgbbuf=NULL;
-	rrtimer timer; double elapsed;
-	int jpgbufsize=0, i, j, tilesizex, tilesizey, numtilesx, numtilesy, ITER;
-	unsigned long *comptilesize=NULL;
-	int flags=(forcemmx?TJ_FORCEMMX:0)|(forcesse?TJ_FORCESSE:0)
-		|(forcesse2?TJ_FORCESSE2:0)|(forcesse3?TJ_FORCESSE3:0)
-		|(fastupsample?TJ_FASTUPSAMPLE:0);
-	int ps=_ps[pf];
-	int pitch=w*ps;
-
-	flags |= _flags[pf];
-	if(bu) flags |= TJ_BOTTOMUP;
-
-	if((rgbbuf=(unsigned char *)malloc(pitch*h)) == NULL)
-	{
-		puts("ERROR: Could not allocate image buffer.");
-		exit(1);
-	}
-
-	if(!quiet) printf("\n>>>>>  %s (%s) <--> JPEG %s Q%d  <<<<<\n", _pfname[pf],
-		bu?"Bottom-up":"Top-down", _subnamel[jpegsub], qual);
-	if(dotile) {tilesizex=tilesizey=4;}  else {tilesizex=w;  tilesizey=h;}
-
-	do
-	{
-		tilesizex*=2;  if(tilesizex>w) tilesizex=w;
-		tilesizey*=2;  if(tilesizey>h) tilesizey=h;
-		numtilesx=(w+tilesizex-1)/tilesizex;
-		numtilesy=(h+tilesizey-1)/tilesizey;
-		if((comptilesize=(unsigned long *)malloc(sizeof(unsigned long)*numtilesx*numtilesy)) == NULL
-		|| (jpegbuf=(unsigned char **)malloc(sizeof(unsigned char *)*numtilesx*numtilesy)) == NULL)
-		{
-			puts("ERROR: Could not allocate image buffers.");
-			goto bailout;
-		}
-		memset(jpegbuf, 0, sizeof(unsigned char *)*numtilesx*numtilesy);
-		for(i=0; i<numtilesx*numtilesy; i++)
-		{
-			if((jpegbuf[i]=(unsigned char *)malloc(TJBUFSIZE(tilesizex, tilesizey))) == NULL)
-			{
-				puts("ERROR: Could not allocate image buffers.");
-				goto bailout;
-			}
-		}
-
-		// Compression test
-		if(quiet) printf("%s\t%s\t%s\t%d\t",  _pfname[pf], bu?"BU":"TD",
-			_subnamel[jpegsub], qual);
-		for(i=0; i<h; i++) memcpy(&rgbbuf[pitch*i], &srcbuf[w*ps*i], w*ps);
-		if((hnd=tjInitCompress())==NULL)
-		{
-			printf("Error in tjInitCompress():\n%s\n", tjGetErrorStr());
-			goto bailout;
-		}
-		_catch(tjCompress(hnd, rgbbuf, tilesizex, pitch, tilesizey, ps,
-			jpegbuf[0], &comptilesize[0], jpegsub, qual, flags));
-		ITER=0;
-		timer.start();
-		do
-		{
-			jpgbufsize=0;  int tilen=0;
-			for(i=0; i<h; i+=tilesizey)
-			{
-				for(j=0; j<w; j+=tilesizex)
-				{
-					int tempw=min(tilesizex, w-j), temph=min(tilesizey, h-i);
-					_catch(tjCompress(hnd, &rgbbuf[pitch*i+j*ps], tempw, pitch,
-						temph, ps, jpegbuf[tilen], &comptilesize[tilen], jpegsub, qual,
-						flags));
-					jpgbufsize+=comptilesize[tilen];
-					tilen++;
-				}
-			}
-			ITER++;
-		} while((elapsed=timer.elapsed())<5.);
-		_catch(tjDestroy(hnd));
-		if(quiet)
-		{
-			if(tilesizex==w && tilesizey==h) printf("Full     \t");
-			else printf("%-4d %-4d\t", tilesizex, tilesizey);
-			printsigfig((double)(w*h)/1000000.*(double)ITER/elapsed, 4);
-			printf("\t");
-			printsigfig((double)(w*h*ps)/(double)jpgbufsize, 4);
-			printf("\t");
-		}
-		else
-		{
-			if(tilesizex==w && tilesizey==h) printf("\nFull image\n");
-			else printf("\nTile size: %d x %d\n", tilesizex, tilesizey);
-			printf("C--> Frame rate:           %f fps\n", (double)ITER/elapsed);
-			printf("     Output image size:    %d bytes\n", jpgbufsize);
-			printf("     Compression ratio:    %f:1\n",
-				(double)(w*h*ps)/(double)jpgbufsize);
-			printf("     Source throughput:    %f Megapixels/sec\n",
-				(double)(w*h)/1000000.*(double)ITER/elapsed);
-			printf("     Output bit stream:    %f Megabits/sec\n",
-				(double)jpgbufsize*8./1000000.*(double)ITER/elapsed);
-		}
-		if(tilesizex==w && tilesizey==h)
-		{
-			sprintf(tempstr, "%s_%sQ%d.jpg", filename, _subnames[jpegsub], qual);
-			if((outfile=fopen(tempstr, "wb"))==NULL)
-			{
-				puts("ERROR: Could not open reference image");
-				exit(1);
-			}
-			if(fwrite(jpegbuf[0], jpgbufsize, 1, outfile)!=1)
-			{
-				puts("ERROR: Could not write reference image");
-				exit(1);
-			}
-			fclose(outfile);
-			if(!quiet) printf("Reference image written to %s\n", tempstr);
-		}
-
-		// Decompression test
-		memset(rgbbuf, 127, pitch*h);  // Grey image means decompressor did nothing
-		if((hnd=tjInitDecompress())==NULL)
-		{
-			printf("Error in tjInitDecompress():\n%s\n", tjGetErrorStr());
-			goto bailout;
-		}
-		_catch(tjDecompress(hnd, jpegbuf[0], jpgbufsize, rgbbuf, tilesizex, pitch,
-			tilesizey, ps, flags));
-		ITER=0;
-		timer.start();
-		do
-		{
-			int tilen=0;
-			for(i=0; i<h; i+=tilesizey)
-			{
-				for(j=0; j<w; j+=tilesizex)
-				{
-					int tempw=min(tilesizex, w-j), temph=min(tilesizey, h-i);
-					_catch(tjDecompress(hnd, jpegbuf[tilen], comptilesize[tilen],
-						&rgbbuf[pitch*i+ps*j], tempw, pitch, temph, ps, flags));
-					tilen++;
-				}
-			}
-			ITER++;
-		}	while((elapsed=timer.elapsed())<5.);
-		_catch(tjDestroy(hnd));
-		if(quiet)
-		{
-			printsigfig((double)(w*h)/1000000.*(double)ITER/elapsed, 4);
-			printf("\n");
-		}
-		else
-		{
-			printf("D--> Frame rate:           %f fps\n", (double)ITER/elapsed);
-			printf("     Dest. throughput:     %f Megapixels/sec\n",
-				(double)(w*h)/1000000.*(double)ITER/elapsed);
-		}
-		if(tilesizex==w && tilesizey==h)
-			sprintf(tempstr, "%s_%sQ%d_full.%s", filename, _subnames[jpegsub], qual,
-				useppm?"ppm":"bmp");
-		else sprintf(tempstr, "%s_%sQ%d_%dx%d.%s", filename, _subnames[jpegsub],
-			qual, tilesizex, tilesizey, useppm?"ppm":"bmp");
-		if(savebmp(tempstr, rgbbuf, w, h, pf, pitch, bu)==-1)
-		{
-			printf("ERROR saving bitmap: %s\n", bmpgeterr());
-			goto bailout;
-		}
-		sprintf(strrchr(tempstr, '.'), "-err.%s", useppm?"ppm":"bmp");
-		if(!quiet)
-			printf("Computing compression error and saving to %s.\n", tempstr);
-		if(jpegsub==TJ_GRAYSCALE)
-		{
-			for(j=0; j<h; j++)
-			{
-				for(i=0; i<w*ps; i+=ps)
-				{
-					int y=(int)((double)srcbuf[w*ps*j+i+_rindex[pf]]*0.299
-						+ (double)srcbuf[w*ps*j+i+_gindex[pf]]*0.587
-						+ (double)srcbuf[w*ps*j+i+_bindex[pf]]*0.114 + 0.5);
-					if(y>255) y=255;  if(y<0) y=0;
-					rgbbuf[pitch*j+i+_rindex[pf]]=abs(rgbbuf[pitch*j+i+_rindex[pf]]-y);
-					rgbbuf[pitch*j+i+_gindex[pf]]=abs(rgbbuf[pitch*j+i+_gindex[pf]]-y);
-					rgbbuf[pitch*j+i+_bindex[pf]]=abs(rgbbuf[pitch*j+i+_bindex[pf]]-y);
-				}
-			}
-		}		
-		else
-		{
-			for(j=0; j<h; j++) for(i=0; i<w*ps; i++)
-				rgbbuf[pitch*j+i]=abs(rgbbuf[pitch*j+i]-srcbuf[w*ps*j+i]);
-		}
-		if(savebmp(tempstr, rgbbuf, w, h, pf, pitch, bu)==-1)
-		{
-			printf("ERROR saving bitmap: %s\n", bmpgeterr());
-			goto bailout;
-		}
-
-		// Cleanup
-		if(jpegbuf)
-		{
-			for(i=0; i<numtilesx*numtilesy; i++)
-				{if(jpegbuf[i]) free(jpegbuf[i]);  jpegbuf[i]=NULL;}
-			free(jpegbuf);  jpegbuf=NULL;
-		}
-		if(comptilesize) {free(comptilesize);  comptilesize=NULL;}
-	} while(tilesizex<w || tilesizey<h);
-
-	if(rgbbuf) {free(rgbbuf);  rgbbuf=NULL;}
-	return;
-
-	bailout:
-	if(jpegbuf)
-	{
-		for(i=0; i<numtilesx*numtilesy; i++)
-			{if(jpegbuf[i]) free(jpegbuf[i]);  jpegbuf[i]=NULL;}
-		free(jpegbuf);  jpegbuf=NULL;
-	}
-	if(comptilesize) {free(comptilesize);  comptilesize=NULL;}
-	if(rgbbuf) {free(rgbbuf);  rgbbuf=NULL;}
-	return;
-}
-
-
-int main(int argc, char *argv[])
-{
-	unsigned char *bmpbuf=NULL;  int w, h, i, useppm=0;
-	int qual, dotile=0, quiet=0, hiqual=-1;  char *temp;
-	BMPPIXELFORMAT pf=BMP_BGR;
-	int bu=0;
-
-	printf("\n");
-
-	if(argc<3)
-	{
-		printf("USAGE: %s <Inputfile (BMP|PPM)> <%% Quality>\n\n", argv[0]);
-		printf("       [-tile]\n");
-		printf("       Test performance of the codec when the image is encoded\n");
-		printf("       as separate tiles of varying sizes.\n\n");
-		printf("       [-forcemmx] [-forcesse] [-forcesse2] [-forcesse3]\n");
-		printf("       Force MMX, SSE, or SSE2 code paths in Intel codec\n\n");
-		printf("       [-rgb | -bgr | -rgba | -bgra | -abgr | -argb]\n");
-		printf("       Test the specified color conversion path in the codec (default: BGR)\n\n");
-		printf("       [-fastupsample]\n");
-		printf("       Use fast, inaccurate upsampling code to perform 4:2:2 and 4:2:0\n");
-		printf("       YUV decoding in libjpeg decompressor\n\n");
-		printf("       [-quiet]\n");
-		printf("       Output in tabular rather than verbose format\n\n");
-		printf("       NOTE: If the quality is specified as a range, i.e. 90-100, a separate\n");
-		printf("       test will be performed for all quality values in the range.\n");
-		exit(1);
-	}
-	if((qual=atoi(argv[2]))<1 || qual>100)
-	{
-		puts("ERROR: Quality must be between 1 and 100.");
-		exit(1);
-	}
-	if((temp=strchr(argv[2], '-'))!=NULL && strlen(temp)>1
-		&& sscanf(&temp[1], "%d", &hiqual)==1 && hiqual>qual && hiqual>=1
-		&& hiqual<=100) {}
-	else hiqual=qual;
-
-	if(argc>3)
-	{
-		for(i=3; i<argc; i++)
-		{
-			if(!stricmp(argv[i], "-tile")) dotile=1;
-			if(!stricmp(argv[i], "-forcesse3"))
-			{
-				printf("Using SSE3 code\n");
-				forcesse3=1;
-			}
-			if(!stricmp(argv[i], "-forcesse2"))
-			{
-				printf("Using SSE2 code\n");
-				forcesse2=1;
-			}
-			if(!stricmp(argv[i], "-forcesse"))
-			{
-				printf("Using SSE code\n");
-				forcesse=1;
-			}
-			if(!stricmp(argv[i], "-forcemmx"))
-			{
-				printf("Using MMX code\n");
-				forcemmx=1;
-			}
-			if(!stricmp(argv[i], "-fastupsample"))
-			{
-				printf("Using fast upsampling code\n");
-				fastupsample=1;
-			}
-			if(!stricmp(argv[i], "-rgb")) pf=BMP_RGB;
-			if(!stricmp(argv[i], "-rgba")) pf=BMP_RGBA;
-			if(!stricmp(argv[i], "-bgr")) pf=BMP_BGR;
-			if(!stricmp(argv[i], "-bgra")) pf=BMP_BGRA;
-			if(!stricmp(argv[i], "-abgr")) pf=BMP_ABGR;
-			if(!stricmp(argv[i], "-argb")) pf=BMP_ARGB;
-			if(!stricmp(argv[i], "-bottomup")) bu=1;
-			if(!stricmp(argv[i], "-quiet")) quiet=1;
-		}
-	}
-
-	if(loadbmp(argv[1], &bmpbuf, &w, &h, pf, 1, bu)==-1)
-	{
-		printf("ERROR loading bitmap: %s\n", bmpgeterr());  exit(1);
-	}
-
-	temp=strrchr(argv[1], '.');
-	if(temp!=NULL)
-	{
-		if(!stricmp(temp, ".ppm")) useppm=1;
-		*temp='\0';
-	}
-
-	if(quiet)
-	{
-		printf("All performance values in Mpixels/sec\n\n");
-		printf("Bitmap\tBitmap\tJPEG\tJPEG\tTile Size\tCompr\tCompr\tDecomp\n");
-		printf("Format\tOrder\tFormat\tQual\t X    Y  \tPerf \tRatio\tPerf\n\n");
-	}
-
-	for(i=hiqual; i>=qual; i--)
-		dotest(bmpbuf, w, h, pf, bu, TJ_GRAYSCALE, i, argv[1], dotile, useppm, quiet);
-	if(quiet) printf("\n");
-	for(i=hiqual; i>=qual; i--)
-		dotest(bmpbuf, w, h, pf, bu, TJ_420, i, argv[1], dotile, useppm, quiet);
-	if(quiet) printf("\n");
-	for(i=hiqual; i>=qual; i--)
-		dotest(bmpbuf, w, h, pf, bu, TJ_422, i, argv[1], dotile, useppm, quiet);
-	if(quiet) printf("\n");
-	for(i=hiqual; i>=qual; i--)
-		dotest(bmpbuf, w, h, pf, bu, TJ_444, i, argv[1], dotile, useppm, quiet);
-
-	if(bmpbuf) free(bmpbuf);
-	return 0;
-}

jsimd.h

@@ -5,6 +5,7 @@
  * 
  * Based on the x86 SIMD extension for IJG JPEG library,
  * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ * For conditions of distribution and use, see copyright notice in jsimdext.inc
  *
  */
 

jsimd_none.c

@@ -6,6 +6,7 @@
  * 
  * Based on the x86 SIMD extension for IJG JPEG library,
  * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ * For conditions of distribution and use, see copyright notice in jsimdext.inc
  *
  * This file contains stubs for when there is no SIMD support available.
  */

jsimddct.h

@@ -5,6 +5,7 @@
  * 
  * Based on the x86 SIMD extension for IJG JPEG library,
  * Copyright (C) 1999-2006, MIYASAKA Masaru.
+ * For conditions of distribution and use, see copyright notice in jsimdext.inc
  *
  */
 

jversion.h

@@ -1,7 +1,8 @@
 /*
  * jversion.h
  *
- * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Copyright (C) 1991-2010, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -9,6 +10,28 @@
  */
 
 
+#if JPEG_LIB_VERSION >= 80
+
+#define JVERSION	"8b  16-May-2010"
+
+#define JCOPYRIGHT	"Copyright (C) 2010, Thomas G. Lane, Guido Vollbeding"
+
+#elif JPEG_LIB_VERSION >= 70
+
+#define JVERSION        "7  27-Jun-2009"
+
+#define JCOPYRIGHT      "Copyright (C) 2009, Thomas G. Lane, Guido Vollbeding"
+
+#else
+
 #define JVERSION	"6b  27-Mar-1998"
 
 #define JCOPYRIGHT	"Copyright (C) 1998, Thomas G. Lane"
+
+#endif
+
+#define LJTCOPYRIGHT	"Copyright (C) 1999-2006 MIYASAKA Masaru\n" \
+			"Copyright (C) 2004 Landmark Graphics Corporation\n" \
+			"Copyright (C) 2005-2007 Sun Microsystems, Inc.\n" \
+			"Copyright (C) 2009 Pierre Ossman for Cendio AB\n" \
+			"Copyright (C) 2009-2011 D. R. Commander"

libjpeg.map.in

@@ -0,0 +1,10 @@
+LIBJPEGTURBO_@JPEG_LIB_VERSION_DECIMAL@ {
+  local:
+    jsimd_*;
+    jconst_*;
+};
+
+LIBJPEG_@JPEG_LIB_VERSION_DECIMAL@ {
+  global:
+    *;
+};

libjpeg.txt

@@ -1,6 +1,6 @@
 USING THE IJG JPEG LIBRARY
 
-Copyright (C) 1994-1998, Thomas G. Lane.
+Copyright (C) 1994-2010, Thomas G. Lane, Guido Vollbeding, D. R. Commander.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -93,7 +93,6 @@ JPEG processes are supported.  (Our subset includes all features now in common
 use.)  Unsupported ISO options include:
 	* Hierarchical storage
 	* Lossless JPEG
-	* Arithmetic entropy coding (unsupported for legal reasons)
 	* DNL marker
 	* Nonintegral subsampling ratios
 We support both 8- and 12-bit data precision, but this is a compile-time
@@ -750,7 +749,7 @@ is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix
 machines) and reference it at your link step.  If you use only half of the
 library (only compression or only decompression), only that much code will be
 included from the library, unless your linker is hopelessly brain-damaged.
-The supplied makefiles build libjpeg.a automatically (see install.doc).
+The supplied makefiles build libjpeg.a automatically (see install.txt).
 
 While you can build the JPEG library as a shared library if the whim strikes
 you, we don't really recommend it.  The trouble with shared libraries is that
@@ -850,6 +849,10 @@ int jpeg_quality_scaling (int quality)
 	can't be expressed as a simple scalar multiplier, in which case the
 	premise of this routine collapses.  Caveat user.
 
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+	[libjpeg v7/v8 only] Set default quantization tables with linear
+	q_scale_factor[] values (see below).
+
 jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
 		      const unsigned int *basic_table,
 		      int scale_factor, boolean force_baseline)
@@ -972,6 +975,32 @@ JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]
 	routines will set up table slot 0 for luminance quality and table
 	slot 1 for chrominance.
 
+int q_scale_factor[NUM_QUANT_TBLS]
+	[libjpeg v7+ only] Linear quantization scaling factors (0-100, default
+	100) for use with jpeg_default_qtables().
+	See rdswitch.c and cjpeg.c for an example of usage.
+	Note that the q_scale_factor[] values use "linear" scales, so JPEG
+	quality levels chosen by the user must be converted to these scales
+	using jpeg_quality_scaling().  Here is an example which corresponds to
+	cjpeg -quality 90,70:
+
+		jpeg_set_defaults(cinfo);
+
+		/* Set luminance quality 90. */
+		cinfo->q_scale_factor[0] = jpeg_quality_scaling(90);
+		/* Set chrominance quality 70. */
+		cinfo->q_scale_factor[1] = jpeg_quality_scaling(70);
+
+		jpeg_default_qtables(cinfo, force_baseline);
+
+	CAUTION: Setting separate quality levels for chrominance and luminance
+	is mainly only useful if chrominance subsampling is disabled.  2x2
+	chrominance subsampling (AKA "4:2:0") is the default, but you can
+	explicitly disable subsampling as follows:
+
+		cinfo->comp_info[0].v_samp_factor = 1;
+		cinfo->comp_info[0].h_samp_factor = 1;
+
 JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]
 JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]
 	Pointers to Huffman coding tables, one per table slot, or NULL if
@@ -982,9 +1011,15 @@ JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]
 	by setting optimize_coding, as discussed above; there's seldom
 	any need to mess with providing your own Huffman tables.
 
-There are some additional cinfo fields which are not documented here
-because you currently can't change them; for example, you can't set
-arith_code TRUE because arithmetic coding is unsupported.
+
+[libjpeg v7+ only] The actual dimensions of the JPEG image that will be written
+to the file are given by the following fields.  These are computed from the
+input image dimensions and the compression parameters by jpeg_start_compress().
+You can also call jpeg_calc_jpeg_dimensions() to obtain the values that will
+result from the current parameter settings.
+
+JDIMENSION jpeg_width		Actual dimensions of output image.
+JDIMENSION jpeg_height
 
 
 Per-component parameters are stored in the struct cinfo.comp_info[i] for
@@ -1374,21 +1409,22 @@ Compressed data handling (source and destination managers)
 
 The JPEG compression library sends its compressed data to a "destination
 manager" module.  The default destination manager just writes the data to a
-stdio stream, but you can provide your own manager to do something else.
-Similarly, the decompression library calls a "source manager" to obtain the
-compressed data; you can provide your own source manager if you want the data
-to come from somewhere other than a stdio stream.
+memory buffer or to a stdio stream, but you can provide your own manager to
+do something else.  Similarly, the decompression library calls a "source
+manager" to obtain the compressed data; you can provide your own source
+manager if you want the data to come from somewhere other than a memory
+buffer or a stdio stream.
 
 In both cases, compressed data is processed a bufferload at a time: the
 destination or source manager provides a work buffer, and the library invokes
 the manager only when the buffer is filled or emptied.  (You could define a
 one-character buffer to force the manager to be invoked for each byte, but
 that would be rather inefficient.)  The buffer's size and location are
-controlled by the manager, not by the library.  For example, if you desired to
-decompress a JPEG datastream that was all in memory, you could just make the
-buffer pointer and length point to the original data in memory.  Then the
-buffer-reload procedure would be invoked only if the decompressor ran off the
-end of the datastream, which would indicate an erroneous datastream.
+controlled by the manager, not by the library.  For example, the memory
+source manager just makes the buffer pointer and length point to the original
+data in memory.  In this case the buffer-reload procedure will be invoked
+only if the decompressor ran off the end of the datastream, which would
+indicate an erroneous datastream.
 
 The work buffer is defined as an array of datatype JOCTET, which is generally
 "char" or "unsigned char".  On a machine where char is not exactly 8 bits
@@ -1440,7 +1476,8 @@ You will also need code to create a jpeg_destination_mgr struct, fill in its
 method pointers, and insert a pointer to the struct into the "dest" field of
 the JPEG compression object.  This can be done in-line in your setup code if
 you like, but it's probably cleaner to provide a separate routine similar to
-the jpeg_stdio_dest() routine of the supplied destination manager.
+the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination
+managers.
 
 Decompression source managers follow a parallel design, but with some
 additional frammishes.  The source manager struct contains a pointer and count
@@ -1516,10 +1553,10 @@ You will also need code to create a jpeg_source_mgr struct, fill in its method
 pointers, and insert a pointer to the struct into the "src" field of the JPEG
 decompression object.  This can be done in-line in your setup code if you
 like, but it's probably cleaner to provide a separate routine similar to the
-jpeg_stdio_src() routine of the supplied source manager.
+jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers.
 
-For more information, consult the stdio source and destination managers
-in jdatasrc.c and jdatadst.c.
+For more information, consult the memory and stdio source and destination
+managers in jdatasrc.c and jdatadst.c.
 
 
 I/O suspension
@@ -2608,7 +2645,7 @@ entire image into a set of virtual coefficient-block arrays, one array per
 component.  The return value is a pointer to an array of virtual-array
 descriptors.  Each virtual array can be accessed directly using the JPEG
 memory manager's access_virt_barray method (see Memory management, below,
-and also read structure.doc's discussion of virtual array handling).  Or,
+and also read structure.txt's discussion of virtual array handling).  Or,
 for simple transcoding to a different JPEG file format, the array list can
 just be handed directly to jpeg_write_coefficients().
 
@@ -2752,7 +2789,7 @@ Memory management
 -----------------
 
 This section covers some key facts about the JPEG library's built-in memory
-manager.  For more info, please read structure.doc's section about the memory
+manager.  For more info, please read structure.txt's section about the memory
 manager, and consult the source code if necessary.
 
 All memory and temporary file allocation within the library is done via the
@@ -2867,7 +2904,7 @@ BITS_IN_JSAMPLE as 12 rather than 8.  Note that this causes JSAMPLE to be
 larger than a char, so it affects the surrounding application's image data.
 The sample applications cjpeg and djpeg can support 12-bit mode only for PPM
 and GIF file formats; you must disable the other file formats to compile a
-12-bit cjpeg or djpeg.  (install.doc has more information about that.)
+12-bit cjpeg or djpeg.  (install.txt has more information about that.)
 At present, a 12-bit library can handle *only* 12-bit images, not both
 precisions.  (If you need to include both 8- and 12-bit libraries in a single
 application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES
@@ -2920,7 +2957,7 @@ about them.)
 
 The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of
 the popular system include file setups, and some not-so-popular ones too.
-See install.doc for configuration procedures.
+See install.txt for configuration procedures.
 
 The code is not dependent on the exact sizes of the C data types.  As
 distributed, we make the assumptions that
@@ -2959,7 +2996,7 @@ The code generally assumes that C names must be unique in the first 15
 characters.  However, global function names can be made unique in the
 first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES.
 
-More info about porting the code may be gleaned by reading jconfig.doc,
+More info about porting the code may be gleaned by reading jconfig.txt,
 jmorecfg.h, and jinclude.h.
 
 

rdbmp.c

@@ -2,6 +2,8 @@
  * rdbmp.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009-2010 by Guido Vollbeding.
+ * Modified 2011 by Siarhei Siamashka.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -177,10 +179,41 @@ get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
 }
 
 
+METHODDEF(JDIMENSION)
+get_32bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
+/* This version is for reading 32-bit pixels */
+{
+  bmp_source_ptr source = (bmp_source_ptr) sinfo;
+  JSAMPARRAY image_ptr;
+  register JSAMPROW inptr, outptr;
+  register JDIMENSION col;
+
+  /* Fetch next row from virtual array */
+  source->source_row--;
+  image_ptr = (*cinfo->mem->access_virt_sarray)
+    ((j_common_ptr) cinfo, source->whole_image,
+     source->source_row, (JDIMENSION) 1, FALSE);
+  /* Transfer data.  Note source values are in BGR order
+   * (even though Microsoft's own documents say the opposite).
+   */
+  inptr = image_ptr[0];
+  outptr = source->pub.buffer[0];
+  for (col = cinfo->image_width; col > 0; col--) {
+    outptr[2] = *inptr++;	/* can omit GETJSAMPLE() safely */
+    outptr[1] = *inptr++;
+    outptr[0] = *inptr++;
+    inptr++;			/* skip the 4th byte (Alpha channel) */
+    outptr += 3;
+  }
+
+  return 1;
+}
+
+
 /*
  * This method loads the image into whole_image during the first call on
  * get_pixel_rows.  The get_pixel_rows pointer is then adjusted to call
- * get_8bit_row or get_24bit_row on subsequent calls.
+ * get_8bit_row, get_24bit_row, or get_32bit_row on subsequent calls.
  */
 
 METHODDEF(JDIMENSION)
@@ -188,10 +221,9 @@ preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
 {
   bmp_source_ptr source = (bmp_source_ptr) sinfo;
   register FILE *infile = source->pub.input_file;
-  register int c;
   register JSAMPROW out_ptr;
   JSAMPARRAY image_ptr;
-  JDIMENSION row, col;
+  JDIMENSION row;
   cd_progress_ptr progress = (cd_progress_ptr) cinfo->progress;
 
   /* Read the data into a virtual array in input-file row order. */
@@ -205,11 +237,11 @@ preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
       ((j_common_ptr) cinfo, source->whole_image,
        row, (JDIMENSION) 1, TRUE);
     out_ptr = image_ptr[0];
-    for (col = source->row_width; col > 0; col--) {
-      /* inline copy of read_byte() for speed */
-      if ((c = getc(infile)) == EOF)
-	ERREXIT(cinfo, JERR_INPUT_EOF);
-      *out_ptr++ = (JSAMPLE) c;
+    if (fread(out_ptr, 1, source->row_width, infile) != source->row_width) {
+      if (feof(infile))
+        ERREXIT(cinfo, JERR_INPUT_EOF);
+      else
+        ERREXIT(cinfo, JERR_FILE_READ);
     }
   }
   if (progress != NULL)
@@ -223,6 +255,9 @@ preload_image (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   case 24:
     source->pub.get_pixel_rows = get_24bit_row;
     break;
+  case 32:
+    source->pub.get_pixel_rows = get_32bit_row;
+    break;
   default:
     ERREXIT(cinfo, JERR_BMP_BADDEPTH);
   }
@@ -251,8 +286,8 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
 			       (((INT32) UCH(array[offset+3])) << 24))
   INT32 bfOffBits;
   INT32 headerSize;
-  INT32 biWidth = 0;		/* initialize to avoid compiler warning */
-  INT32 biHeight = 0;
+  INT32 biWidth;
+  INT32 biHeight;
   unsigned int biPlanes;
   INT32 biCompression;
   INT32 biXPelsPerMeter,biYPelsPerMeter;
@@ -300,8 +335,6 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
       ERREXIT(cinfo, JERR_BMP_BADDEPTH);
       break;
     }
-    if (biPlanes != 1)
-      ERREXIT(cinfo, JERR_BMP_BADPLANES);
     break;
   case 40:
   case 64:
@@ -325,12 +358,13 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     case 24:			/* RGB image */
       TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
       break;
+    case 32:			/* RGB image + Alpha channel */
+      TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
+      break;
     default:
       ERREXIT(cinfo, JERR_BMP_BADDEPTH);
       break;
     }
-    if (biPlanes != 1)
-      ERREXIT(cinfo, JERR_BMP_BADPLANES);
     if (biCompression != 0)
       ERREXIT(cinfo, JERR_BMP_COMPRESSED);
 
@@ -343,9 +377,14 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     break;
   default:
     ERREXIT(cinfo, JERR_BMP_BADHEADER);
-    break;
+    return;
   }
 
+  if (biWidth <= 0 || biHeight <= 0)
+    ERREXIT(cinfo, JERR_BMP_EMPTY);
+  if (biPlanes != 1)
+    ERREXIT(cinfo, JERR_BMP_BADPLANES);
+
   /* Compute distance to bitmap data --- will adjust for colormap below */
   bPad = bfOffBits - (headerSize + 14);
 
@@ -375,6 +414,8 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   /* Compute row width in file, including padding to 4-byte boundary */
   if (source->bits_per_pixel == 24)
     row_width = (JDIMENSION) (biWidth * 3);
+  else if (source->bits_per_pixel == 32)
+    row_width = (JDIMENSION) (biWidth * 4);
   else
     row_width = (JDIMENSION) biWidth;
   while ((row_width & 3) != 0) row_width++;

rdjpgcom.1

@@ -1,9 +1,12 @@
-.TH RDJPGCOM 1 "11 October 1997"
+.TH RDJPGCOM 1 "02 April 2009"
 .SH NAME
 rdjpgcom \- display text comments from a JPEG file
 .SH SYNOPSIS
 .B rdjpgcom
 [
+.B \-raw
+]
+[
 .B \-verbose
 ]
 [
@@ -25,6 +28,12 @@ file.  The maximum size of a COM block is 64K, but you can have as many of
 them as you like in one JPEG file.
 .SH OPTIONS
 .TP
+.B \-raw
+Normally
+.B rdjpgcom
+escapes non-printable characters in comments, for security reasons.
+This option avoids that.
+.PP
 .B \-verbose
 Causes
 .B rdjpgcom

rdjpgcom.c

@@ -2,6 +2,7 @@
  * rdjpgcom.c
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2009 by Bill Allombert, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,6 +15,9 @@
 #define JPEG_CJPEG_DJPEG	/* to get the command-line config symbols */
 #include "jinclude.h"		/* get auto-config symbols, <stdio.h> */
 
+#ifdef HAVE_LOCALE_H
+#include <locale.h>		/* Bill Allombert: use locale for isprint */
+#endif
 #include <ctype.h>		/* to declare isupper(), tolower() */
 #ifdef USE_SETMODE
 #include <fcntl.h>		/* to declare setmode()'s parameter macros */
@@ -218,12 +222,17 @@ skip_variable (void)
  */
 
 static void
-process_COM (void)
+process_COM (int raw)
 {
   unsigned int length;
   int ch;
   int lastch = 0;
 
+  /* Bill Allombert: set locale properly for isprint */
+#ifdef HAVE_LOCALE_H
+  setlocale(LC_CTYPE, "");
+#endif
+
   /* Get the marker parameter length count */
   length = read_2_bytes();
   /* Length includes itself, so must be at least 2 */
@@ -233,12 +242,14 @@ process_COM (void)
 
   while (length > 0) {
     ch = read_1_byte();
+    if (raw) {
+      putc(ch, stdout);
     /* Emit the character in a readable form.
      * Nonprintables are converted to \nnn form,
      * while \ is converted to \\.
      * Newlines in CR, CR/LF, or LF form will be printed as one newline.
      */
-    if (ch == '\r') {
+    } else if (ch == '\r') {
       printf("\n");
     } else if (ch == '\n') {
       if (lastch != '\r')
@@ -254,6 +265,11 @@ process_COM (void)
     length--;
   }
   printf("\n");
+
+  /* Bill Allombert: revert to C locale */
+#ifdef HAVE_LOCALE_H
+  setlocale(LC_CTYPE, "C");
+#endif
 }
 
 
@@ -321,7 +337,7 @@ process_SOFn (int marker)
  */
 
 static int
-scan_JPEG_header (int verbose)
+scan_JPEG_header (int verbose, int raw)
 {
   int marker;
 
@@ -362,7 +378,7 @@ scan_JPEG_header (int verbose)
       return marker;
 
     case M_COM:
-      process_COM();
+      process_COM(raw);
       break;
 
     case M_APP12:
@@ -371,7 +387,7 @@ scan_JPEG_header (int verbose)
        */
       if (verbose) {
 	printf("APP12 contains:\n");
-	process_COM();
+	process_COM(raw);
       } else
 	skip_variable();
       break;
@@ -398,6 +414,7 @@ usage (void)
   fprintf(stderr, "Usage: %s [switches] [inputfile]\n", progname);
 
   fprintf(stderr, "Switches (names may be abbreviated):\n");
+  fprintf(stderr, "  -raw        Display non-printable characters in comments (unsafe)\n");
   fprintf(stderr, "  -verbose    Also display dimensions of JPEG image\n");
 
   exit(EXIT_FAILURE);
@@ -438,7 +455,7 @@ main (int argc, char **argv)
 {
   int argn;
   char * arg;
-  int verbose = 0;
+  int verbose = 0, raw = 0;
 
   /* On Mac, fetch a command line. */
 #ifdef USE_CCOMMAND
@@ -457,6 +474,8 @@ main (int argc, char **argv)
     arg++;			/* advance over '-' */
     if (keymatch(arg, "verbose", 1)) {
       verbose++;
+    } else if (keymatch(arg, "raw", 1)) {
+      raw = 1;
     } else
       usage();
   }
@@ -488,7 +507,7 @@ main (int argc, char **argv)
   }
 
   /* Scan the JPEG headers. */
-  (void) scan_JPEG_header(verbose);
+  (void) scan_JPEG_header(verbose, raw);
 
   /* All done. */
   exit(EXIT_SUCCESS);

rdppm.c

@@ -2,6 +2,7 @@
  * rdppm.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2009 by Bill Allombert, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -250,8 +251,8 @@ get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   bufferptr = source->iobuffer;
   for (col = cinfo->image_width; col > 0; col--) {
     register int temp;
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
     *ptr++ = rescale[temp];
   }
   return 1;
@@ -274,14 +275,14 @@ get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   bufferptr = source->iobuffer;
   for (col = cinfo->image_width; col > 0; col--) {
     register int temp;
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
     *ptr++ = rescale[temp];
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
     *ptr++ = rescale[temp];
-    temp  = UCH(*bufferptr++);
-    temp |= UCH(*bufferptr++) << 8;
+    temp  = UCH(*bufferptr++) << 8;
+    temp |= UCH(*bufferptr++);
     *ptr++ = rescale[temp];
   }
   return 1;

rdswitch.c

@@ -2,6 +2,7 @@
  * rdswitch.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Copyright (C) 2010, D. R. Commander.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -9,6 +10,7 @@
  * command-line switches.  Switches processed here are:
  *	-qtables file		Read quantization tables from text file
  *	-scans file		Read scan script from text file
+ *	-quality N[,N,...]	Set quality ratings
  *	-qslots N[,N,...]	Set component quantization table selectors
  *	-sample HxV[,HxV,...]	Set component sampling factors
  */
@@ -69,9 +71,12 @@ read_text_integer (FILE * file, long * result, int * termchar)
 }
 
 
+#if JPEG_LIB_VERSION < 70
+static int q_scale_factor[NUM_QUANT_TBLS] = {100, 100, 100, 100};
+#endif
+
 GLOBAL(boolean)
-read_quant_tables (j_compress_ptr cinfo, char * filename,
-		   int scale_factor, boolean force_baseline)
+read_quant_tables (j_compress_ptr cinfo, char * filename, boolean force_baseline)
 /* Read a set of quantization tables from the specified file.
  * The file is plain ASCII text: decimal numbers with whitespace between.
  * Comments preceded by '#' may be included in the file.
@@ -108,7 +113,13 @@ read_quant_tables (j_compress_ptr cinfo, char * filename,
       }
       table[i] = (unsigned int) val;
     }
-    jpeg_add_quant_table(cinfo, tblno, table, scale_factor, force_baseline);
+#if JPEG_LIB_VERSION >= 70
+    jpeg_add_quant_table(cinfo, tblno, table, cinfo->q_scale_factor[tblno],
+			 force_baseline);
+#else
+    jpeg_add_quant_table(cinfo, tblno, table, q_scale_factor[tblno],
+                         force_baseline);
+#endif
     tblno++;
   }
 
@@ -262,6 +273,84 @@ bogus:
 #endif /* C_MULTISCAN_FILES_SUPPORTED */
 
 
+#if JPEG_LIB_VERSION < 70
+/* These are the sample quantization tables given in JPEG spec section K.1.
+ * The spec says that the values given produce "good" quality, and
+ * when divided by 2, "very good" quality.
+ */
+static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
+  16,  11,  10,  16,  24,  40,  51,  61,
+  12,  12,  14,  19,  26,  58,  60,  55,
+  14,  13,  16,  24,  40,  57,  69,  56,
+  14,  17,  22,  29,  51,  87,  80,  62,
+  18,  22,  37,  56,  68, 109, 103,  77,
+  24,  35,  55,  64,  81, 104, 113,  92,
+  49,  64,  78,  87, 103, 121, 120, 101,
+  72,  92,  95,  98, 112, 100, 103,  99
+};
+static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
+  17,  18,  24,  47,  99,  99,  99,  99,
+  18,  21,  26,  66,  99,  99,  99,  99,
+  24,  26,  56,  99,  99,  99,  99,  99,
+  47,  66,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99
+};
+
+
+LOCAL(void)
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+{
+  jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
+		       q_scale_factor[0], force_baseline);
+  jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
+		       q_scale_factor[1], force_baseline);
+}
+#endif
+
+
+GLOBAL(boolean)
+set_quality_ratings (j_compress_ptr cinfo, char *arg, boolean force_baseline)
+/* Process a quality-ratings parameter string, of the form
+ *     N[,N,...]
+ * If there are more q-table slots than parameters, the last value is replicated.
+ */
+{
+  int val = 75;			/* default value */
+  int tblno;
+  char ch;
+
+  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
+    if (*arg) {
+      ch = ',';			/* if not set by sscanf, will be ',' */
+      if (sscanf(arg, "%d%c", &val, &ch) < 1)
+	return FALSE;
+      if (ch != ',')		/* syntax check */
+	return FALSE;
+      /* Convert user 0-100 rating to percentage scaling */
+#if JPEG_LIB_VERSION >= 70
+      cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val);
+#else
+      q_scale_factor[tblno] = jpeg_quality_scaling(val);
+#endif
+      while (*arg && *arg++ != ',') /* advance to next segment of arg string */
+	;
+    } else {
+      /* reached end of parameter, set remaining factors to last value */
+#if JPEG_LIB_VERSION >= 70
+      cinfo->q_scale_factor[tblno] = jpeg_quality_scaling(val);
+#else
+      q_scale_factor[tblno] = jpeg_quality_scaling(val);
+#endif
+    }
+  }
+  jpeg_default_qtables(cinfo, force_baseline);
+  return TRUE;
+}
+
+
 GLOBAL(boolean)
 set_quant_slots (j_compress_ptr cinfo, char *arg)
 /* Process a quantization-table-selectors parameter string, of the form

release/Description.plist.in

@@ -5,8 +5,8 @@
 	<key>IFPkgDescriptionDescription</key>
 	<string>A SIMD-accelerated JPEG codec which provides both the libjpeg and TurboJPEG APIs</string>
 	<key>IFPkgDescriptionTitle</key>
-	<string>{__APPNAME}</string>
+	<string>@PACKAGE_NAME@</string>
 	<key>IFPkgDescriptionVersion</key>
-	<string>{__VERSION}</string>
+	<string>@VERSION@</string>
 </dict>
 </plist>

release/Info.plist.in

@@ -3,15 +3,15 @@
 <plist version="1.0">
 <dict>
 	<key>CFBundleGetInfoString</key>
-	<string>{__VERSION}, The libjpeg-turbo Project</string>
+	<string>@VERSION@, The libjpeg-turbo Project</string>
 	<key>CFBundleIdentifier</key>
 	<string>com.libjpeg-turbo.libjpeg-turbo</string>
 	<key>CFBundleShortVersionString</key>
-	<string>{__VERSION}</string>
+	<string>@VERSION@</string>
 	<key>IFMajorVersion</key>
 	<integer>1</integer>
 	<key>IFMinorVersion</key>
-	<integer>{__BUILD}</integer>
+	<integer>@BUILD@</integer>
 	<key>IFPkgFlagAllowBackRev</key>
 	<false/>
 	<key>IFPkgFlagAuthorizationAction</key>

release/ReadMe.rtf

@@ -1,11 +1,13 @@
-{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf250
+{\rtf1\ansi\ansicpg1252\cocoartf1038\cocoasubrtf350
 {\fonttbl\f0\fswiss\fcharset0 Helvetica;}
 {\colortbl;\red255\green255\blue255;}
 \margl1440\margr1440\vieww15200\viewh9600\viewkind0
 \deftab720
 \pard\pardeftab720\ql\qnatural
 
-\f0\fs24 \cf0 libjpeg-turbo is a high-speed version of libjpeg for x86 and x86-64 processors which uses SIMD instructions (MMX, SSE2, etc.) to accelerate baseline JPEG compression and decompression.  libjpeg-turbo is generally 2-4x as fast as the unmodified version of libjpeg, all else being equal.  libjpeg-turbo also includes a wrapper library for the TurboJPEG API used by VirtualGL and TurboVNC.\
+\f0\fs24 \cf0 libjpeg-turbo is a derivative of libjpeg which uses SIMD instructions (MMX, SSE2, etc.) to accelerate baseline JPEG compression and decompression on x86 and x86-64 systems.  On such systems, libjpeg-turbo is generally 2-4x as fast as the unmodified version of libjpeg, all else being equal.  libjpeg-turbo also includes a wrapper library which implements the TurboJPEG API used by VirtualGL and TurboVNC.\
 \
-libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but the TigerVNC and VirtualGL projects made numerous enhancements to the codec, including improved support for Mac OS X, 64-bit support, support for 32-bit and big endian pixel formats, accelerated Huffman encoding/decoding, and various bug fixes.  The goal was to produce a fully open source codec that could replace the partially closed source TurboJPEG/IPP codec used by VirtualGL and TurboVNC.  libjpeg-turbo generally performs in the range of 80-120% of TurboJPEG/IPP.  It is faster in some areas but slower in others.\
+libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but the TigerVNC and VirtualGL projects made numerous enhancements to the codec in 2009, including improved support for Mac OS X, 64-bit support, support for 32-bit and big endian pixel formats (RGBX, XBGR, etc.), accelerated Huffman encoding/decoding, and various bug fixes.  The goal was to produce a fully open source codec that could replace the partially closed source TurboJPEG/IPP codec used by VirtualGL and TurboVNC.  libjpeg-turbo generally performs in the range of 80-120% of TurboJPEG/IPP.  It is faster in some areas but slower in others.\
+\
+In early 2010, libjpeg-turbo spun off into its own independent project, with the goal of making high-speed JPEG compression/decompression technology available to a broader range of users and developers.\
 }

release/deb-control.in

@@ -0,0 +1,28 @@
+Package: @PACKAGE_NAME@
+Version: @VERSION@-@BUILD@
+Section: misc
+Priority: optional
+Architecture: @DEBARCH@
+Essential: no
+Maintainer: The libjpeg-turbo Project [http://www.libjpeg-turbo.org]
+Description: A SIMD-accelerated JPEG codec which provides both the libjpeg and TurboJPEG APIs
+ libjpeg-turbo is a derivative of libjpeg which uses SIMD instructions (MMX,
+ SSE2, etc.) to accelerate baseline JPEG compression and decompression on x86
+ and x86-64 systems.  On such systems, libjpeg-turbo is generally 2-4x as fast
+ as the unmodified version of libjpeg, all else being equal.  libjpeg-turbo
+ also includes a wrapper library which implements the TurboJPEG API used by
+ VirtualGL and TurboVNC.
+ .
+ libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but
+ the TigerVNC and VirtualGL projects made numerous enhancements to the codec
+ in 2009, including improved support for Mac OS X, 64-bit support, support
+ for 32-bit and big endian pixel formats (RGBX, XBGR, etc.), accelerated
+ Huffman encoding/decoding, and various bug fixes.  The goal was to produce a
+ fully open source codec that could replace the partially closed source
+ TurboJPEG/IPP codec used by VirtualGL and TurboVNC.  libjpeg-turbo generally
+ performs in the range of 80-120% of TurboJPEG/IPP.  It is faster in some
+ areas but slower in others.
+ .
+ In early 2010, libjpeg-turbo spun off into its own independent project, with
+ the goal of making high-speed JPEG compression/decompression technology
+ available to a broader range of users and developers.

release/deb-control.tmpl

@@ -1,23 +0,0 @@
-Package: {__PKGNAME}
-Version: {__VERSION}-{__BUILD}
-Section: misc
-Priority: optional
-Architecture: {__ARCH}
-Essential: no
-Maintainer: The libjpeg-turbo Project [http://libjpeg-turbo.VirtualGL.org]
-Description: A toolkit for displaying OpenGL applications to thin clients
- libjpeg-turbo is a high-speed version of libjpeg for x86 and x86-64 processors
- which uses SIMD instructions (MMX, SSE2, etc.) to accelerate baseline JPEG
- compression and decompression.  libjpeg-turbo is generally 2-4x as fast
- as the unmodified version of libjpeg, all else being equal.  libjpeg-turbo
- also includes a wrapper library for the TurboJPEG API used by VirtualGL and
- TurboVNC.
- .
- libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but
- the TigerVNC and VirtualGL projects made numerous enhancements to the codec,
- including improved support for Mac OS X, 64-bit support, support for 32-bit
- and big endian pixel formats, accelerated Huffman encoding/decoding, and
- various bug fixes.  The goal was to produce a fully open source codec that
- could replace the partially closed source TurboJPEG/IPP codec used by
- VirtualGL and TurboVNC.  libjpeg-turbo generally performs in the range of
- 80-120% of TurboJPEG/IPP.  It is faster in some areas but slower in others.

release/libjpeg-turbo.nsi

@@ -1,115 +0,0 @@
-Name "libjpeg-turbo SDK for ${PLATFORM}"
-OutFile ${WBLDDIR}\${APPNAME}.exe
-InstallDir c:\${APPNAME}
-
-SetCompressor bzip2
-
-Page directory
-Page instfiles
-
-UninstPage uninstConfirm
-UninstPage instfiles
-
-Section "libjpeg-turbo SDK for ${PLATFORM} (required)"
-	SectionIn RO
-!ifdef GCC
-	IfFileExists $SYSDIR/libturbojpeg.dll exists 0
-!else
-	IfFileExists $SYSDIR/turbojpeg.dll exists 0
-!endif
-	goto notexists
-	exists:
-!ifdef GCC
-	MessageBox MB_OK "An existing version of the libjpeg-turbo SDK for ${PLATFORM} is already installed.  Please uninstall it first."
-!else
-	MessageBox MB_OK "An existing version of the libjpeg-turbo SDK for ${PLATFORM} or the TurboJPEG SDK is already installed.  Please uninstall it first."
-!endif
-	quit
-
-	notexists:
-	SetOutPath $SYSDIR
-!ifdef GCC
-	File "${WLIBDIR}\libturbojpeg.dll"
-!else
-	File "${WLIBDIR}\turbojpeg.dll"
-!endif
-	SetOutPath $INSTDIR\bin
-!ifdef GCC
-	File "${WLIBDIR}\libjpeg-62.dll"
-!else
-	File "${WLIBDIR}\jpeg62.dll"
-!endif
-	SetOutPath $INSTDIR\lib
-!ifdef GCC
-	File "${WLIBDIR}\libturbojpeg.dll.a"
-	File "${WLIBDIR}\libturbojpeg.a"
-	File "${WLIBDIR}\libjpeg.dll.a"
-	File "${WLIBDIR}\libjpeg.a"
-!else
-	File "${WLIBDIR}\turbojpeg.lib"
-	File "${WLIBDIR}\turbojpeg-static.lib"
-	File "${WLIBDIR}\jpeg.lib"
-	File "${WLIBDIR}\jpeg-static.lib"
-!endif
-	SetOutPath $INSTDIR\include
-	File "${WHDRDIR}\jconfig.h"
-	File "${WSRCDIR}\jerror.h"
-	File "${WSRCDIR}\jmorecfg.h"
-	File "${WSRCDIR}\jpeglib.h"
-	File "${WSRCDIR}\turbojpeg.h"
-	SetOutPath $INSTDIR
-	File "${WSRCDIR}\README"
-	File "${WSRCDIR}\README-turbo.txt"
-	File "${WSRCDIR}\libjpeg.doc"
-	File "${WSRCDIR}\LGPL.txt"
-	File "${WSRCDIR}\LICENSE.txt"
-
-	WriteRegStr HKLM "SOFTWARE\${APPNAME} ${VERSION}" "Install_Dir" "$INSTDIR"
-
-	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\${APPNAME} ${VERSION}" "DisplayName" "libjpeg-turbo SDK v${VERSION} for ${PLATFORM}"
-	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\${APPNAME} ${VERSION}" "UninstallString" '"$INSTDIR\uninstall_${VERSION}.exe"'
-	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\${APPNAME} ${VERSION}" "NoModify" 1
-	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\${APPNAME} ${VERSION}" "NoRepair" 1
-	WriteUninstaller "uninstall_${VERSION}.exe"
-SectionEnd
-
-Section "Uninstall"
-
-	SetShellVarContext all
-
-	DeleteRegKey HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\${APPNAME} ${VERSION}"
-	DeleteRegKey HKLM "SOFTWARE\${APPNAME} ${VERSION}"
-
-!ifdef GCC
-	Delete $INSTDIR\bin\libjpeg-62.dll
-	Delete $SYSDIR\libturbojpeg.dll
-	Delete $INSTDIR\lib\libturbojpeg.dll.a"
-	Delete $INSTDIR\lib\libturbojpeg.a"
-	Delete $INSTDIR\lib\libjpeg.dll.a"
-	Delete $INSTDIR\lib\libjpeg.a"
-!else
-	Delete $INSTDIR\bin\jpeg62.dll
-	Delete $SYSDIR\turbojpeg.dll
-	Delete $INSTDIR\lib\jpeg.lib
-	Delete $INSTDIR\lib\jpeg-static.lib
-	Delete $INSTDIR\lib\turbojpeg.lib
-	Delete $INSTDIR\lib\turbojpeg-static.lib
-!endif
-	Delete $INSTDIR\include\jconfig.h"
-	Delete $INSTDIR\include\jerror.h"
-	Delete $INSTDIR\include\jmorecfg.h"
-	Delete $INSTDIR\include\jpeglib.h"
-	Delete $INSTDIR\include\turbojpeg.h"
-	Delete $INSTDIR\uninstall_${VERSION}.exe
-	Delete $INSTDIR\README
-	Delete $INSTDIR\README-turbo.txt
-	Delete $INSTDIR\libjpeg.doc
-	Delete $INSTDIR\LGPL.txt
-	Delete $INSTDIR\LICENSE.txt
-
-	RMDir "$INSTDIR\include"
-	RMDir "$INSTDIR\lib"
-	RMDir "$INSTDIR\bin"
-	RMDir "$INSTDIR"
-
-SectionEnd

release/libjpeg-turbo.nsi.in

@@ -0,0 +1,141 @@
+!include x64.nsh
+Name "@CMAKE_PROJECT_NAME@ SDK for @INST_PLATFORM@"
+OutFile "@CMAKE_BINARY_DIR@\${BUILDDIR}@INST_NAME@.exe"
+InstallDir c:\@INST_DIR@
+
+SetCompressor bzip2
+
+Page directory
+Page instfiles
+
+UninstPage uninstConfirm
+UninstPage instfiles
+
+Section "@CMAKE_PROJECT_NAME@ SDK for @INST_PLATFORM@ (required)"
+!ifdef WIN64
+	${If} ${RunningX64}
+	${DisableX64FSRedirection}
+	${Endif}
+!endif
+	SectionIn RO
+!ifdef GCC
+	IfFileExists $SYSDIR/libturbojpeg.dll exists 0
+!else
+	IfFileExists $SYSDIR/turbojpeg.dll exists 0
+!endif
+	goto notexists
+	exists:
+!ifdef GCC
+	MessageBox MB_OK "An existing version of the @CMAKE_PROJECT_NAME@ SDK for @INST_PLATFORM@ is already installed.  Please uninstall it first."
+!else
+	MessageBox MB_OK "An existing version of the @CMAKE_PROJECT_NAME@ SDK for @INST_PLATFORM@ or the TurboJPEG SDK is already installed.  Please uninstall it first."
+!endif
+	quit
+
+	notexists:
+	SetOutPath $SYSDIR
+!ifdef GCC
+	File "@CMAKE_BINARY_DIR@\libturbojpeg.dll"
+!else
+	File "@CMAKE_BINARY_DIR@\${BUILDDIR}turbojpeg.dll"
+!endif
+	SetOutPath $INSTDIR\bin
+!ifdef GCC
+	File "/oname=libjpeg-@DLL_VERSION@.dll" "@CMAKE_BINARY_DIR@\sharedlib\libjpeg-*.dll" 
+!else
+	File "@CMAKE_BINARY_DIR@\sharedlib\${BUILDDIR}jpeg@DLL_VERSION@.dll"
+!endif
+	File "@CMAKE_BINARY_DIR@\sharedlib\${BUILDDIR}cjpeg.exe"
+	File "@CMAKE_BINARY_DIR@\sharedlib\${BUILDDIR}djpeg.exe"
+	File "@CMAKE_BINARY_DIR@\sharedlib\${BUILDDIR}jpegtran.exe"
+	File "@CMAKE_BINARY_DIR@\${BUILDDIR}jpgtest.exe"
+	File "@CMAKE_BINARY_DIR@\${BUILDDIR}rdjpgcom.exe"
+	File "@CMAKE_BINARY_DIR@\${BUILDDIR}wrjpgcom.exe"
+	SetOutPath $INSTDIR\lib
+!ifdef GCC
+	File "@CMAKE_BINARY_DIR@\libturbojpeg.dll.a"
+	File "@CMAKE_BINARY_DIR@\libturbojpeg.a"
+	File "@CMAKE_BINARY_DIR@\sharedlib\libjpeg.dll.a"
+	File "@CMAKE_BINARY_DIR@\libjpeg.a"
+!else
+	File "@CMAKE_BINARY_DIR@\${BUILDDIR}turbojpeg.lib"
+	File "@CMAKE_BINARY_DIR@\${BUILDDIR}turbojpeg-static.lib"
+	File "@CMAKE_BINARY_DIR@\sharedlib\${BUILDDIR}jpeg.lib"
+	File "@CMAKE_BINARY_DIR@\${BUILDDIR}jpeg-static.lib"
+!endif
+	SetOutPath $INSTDIR\include
+	File "@CMAKE_BINARY_DIR@\jconfig.h"
+	File "@CMAKE_SOURCE_DIR@\jerror.h"
+	File "@CMAKE_SOURCE_DIR@\jmorecfg.h"
+	File "@CMAKE_SOURCE_DIR@\jpeglib.h"
+	File "@CMAKE_SOURCE_DIR@\turbojpeg.h"
+	SetOutPath $INSTDIR\doc
+	File "@CMAKE_SOURCE_DIR@\README"
+	File "@CMAKE_SOURCE_DIR@\README-turbo.txt"
+	File "@CMAKE_SOURCE_DIR@\libjpeg.txt"
+	File "@CMAKE_SOURCE_DIR@\LGPL.txt"
+	File "@CMAKE_SOURCE_DIR@\LICENSE.txt"
+	File "@CMAKE_SOURCE_DIR@\usage.txt"
+
+	WriteRegStr HKLM "SOFTWARE\@INST_DIR@ @VERSION@" "Install_Dir" "$INSTDIR"
+
+	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@INST_DIR@ @VERSION@" "DisplayName" "@CMAKE_PROJECT_NAME@ SDK v@VERSION@ for @INST_PLATFORM@"
+	WriteRegStr HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@INST_DIR@ @VERSION@" "UninstallString" '"$INSTDIR\uninstall_@VERSION@.exe"'
+	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@INST_DIR@ @VERSION@" "NoModify" 1
+	WriteRegDWORD HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@INST_DIR@ @VERSION@" "NoRepair" 1
+	WriteUninstaller "uninstall_@VERSION@.exe"
+SectionEnd
+
+Section "Uninstall"
+!ifdef WIN64
+	${If} ${RunningX64}
+	${DisableX64FSRedirection}
+	${Endif}
+!endif
+
+	SetShellVarContext all
+
+	DeleteRegKey HKLM "Software\Microsoft\Windows\CurrentVersion\Uninstall\@INST_DIR@ @VERSION@"
+	DeleteRegKey HKLM "SOFTWARE\@INST_DIR@ @VERSION@"
+
+!ifdef GCC
+	Delete $INSTDIR\bin\libjpeg-@DLL_VERSION@.dll
+	Delete $SYSDIR\libturbojpeg.dll
+	Delete $INSTDIR\lib\libturbojpeg.dll.a"
+	Delete $INSTDIR\lib\libturbojpeg.a"
+	Delete $INSTDIR\lib\libjpeg.dll.a"
+	Delete $INSTDIR\lib\libjpeg.a"
+!else
+	Delete $INSTDIR\bin\jpeg@DLL_VERSION@.dll
+	Delete $SYSDIR\turbojpeg.dll
+	Delete $INSTDIR\lib\jpeg.lib
+	Delete $INSTDIR\lib\jpeg-static.lib
+	Delete $INSTDIR\lib\turbojpeg.lib
+	Delete $INSTDIR\lib\turbojpeg-static.lib
+!endif
+	Delete $INSTDIR\bin\cjpeg.exe
+	Delete $INSTDIR\bin\djpeg.exe
+	Delete $INSTDIR\bin\jpegtran.exe
+	Delete $INSTDIR\bin\jpgtest.exe
+	Delete $INSTDIR\bin\rdjpgcom.exe
+	Delete $INSTDIR\bin\wrjpgcom.exe
+	Delete $INSTDIR\include\jconfig.h"
+	Delete $INSTDIR\include\jerror.h"
+	Delete $INSTDIR\include\jmorecfg.h"
+	Delete $INSTDIR\include\jpeglib.h"
+	Delete $INSTDIR\include\turbojpeg.h"
+	Delete $INSTDIR\uninstall_@VERSION@.exe
+	Delete $INSTDIR\doc\README
+	Delete $INSTDIR\doc\README-turbo.txt
+	Delete $INSTDIR\doc\libjpeg.txt
+	Delete $INSTDIR\doc\LGPL.txt
+	Delete $INSTDIR\doc\LICENSE.txt
+	Delete $INSTDIR\doc\usage.txt
+
+	RMDir "$INSTDIR\include"
+	RMDir "$INSTDIR\lib"
+	RMDir "$INSTDIR\doc"
+	RMDir "$INSTDIR\bin"
+	RMDir "$INSTDIR"
+
+SectionEnd

release/libjpeg-turbo.spec

@@ -1,82 +0,0 @@
-%ifarch x86_64
-%define __lib lib64
-%else
-%define __lib lib
-%endif
-
-Summary: A SIMD-accelerated JPEG codec which provides both the libjpeg and TurboJPEG APIs
-Name: %{_name}
-Version: %{_version}
-Vendor: The libjpeg-turbo Project
-URL: http://libjpeg-turbo.virtualgl.org
-Group: System Environment/Libraries
-#-->Source0: http://prdownloads.sourceforge.net/libjpeg-turbo/libjpeg-turbo-%{version}.tar.gz
-Release: %{_build}
-License: wxWindows Library License, v3.1
-BuildRoot: %{_blddir}/%{name}-buildroot-%{version}-%{release}
-Prereq: /sbin/ldconfig
-Provides: %{name} = %{version}-%{release}, turbojpeg = 2.00
-Obsoletes: turbojpeg
-
-%description
-libjpeg-turbo is a high-speed version of libjpeg for x86 and x86-64 processors
-which uses SIMD instructions (MMX, SSE2, etc.) to accelerate baseline JPEG
-compression and decompression.  libjpeg-turbo is generally 2-4x as fast
-as the unmodified version of libjpeg, all else being equal.  libjpeg-turbo also
-includes a wrapper library for the TurboJPEG API used by VirtualGL and
-TurboVNC.
-
-libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but
-the TigerVNC and VirtualGL projects made numerous enhancements to the codec,
-including improved support for Mac OS X, 64-bit support, support for 32-bit
-and big endian pixel formats, accelerated Huffman encoding/decoding, and
-various bug fixes.  The goal was to produce a fully open source codec that
-could replace the partially closed source TurboJPEG/IPP codec used by VirtualGL
-and TurboVNC.  libjpeg-turbo generally performs in the range of 80-120% of
-TurboJPEG/IPP.  It is faster in some areas but slower in others.
-
-#-->%prep
-#-->%setup -q
-
-#-->%build
-#-->configure prefix=$RPM_BUILD_ROOT/opt/%{name} libdir=$RPM_BUILD_ROOT/opt/%{name}/%{__lib} --with-pic
-#-->make prefix=$RPM_BUILD_ROOT/opt/%{name} libdir=$RPM_BUILD_ROOT/opt/%{name}/%{__lib}
-
-%install
-
-rm -rf $RPM_BUILD_ROOT
-make install prefix=$RPM_BUILD_ROOT/opt/%{name} libdir=$RPM_BUILD_ROOT/opt/%{name}/%{__lib}
-rm -f $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/*.la
-mkdir -p $RPM_BUILD_ROOT/usr/%{__lib}
-mv $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/libturbojpeg.* $RPM_BUILD_ROOT/usr/%{__lib}
-/sbin/ldconfig -n $RPM_BUILD_ROOT/opt/%{name}/%{__lib}
-/sbin/ldconfig -n $RPM_BUILD_ROOT/usr/%{__lib}
-mkdir -p $RPM_BUILD_ROOT/usr/include
-mv $RPM_BUILD_ROOT/opt/%{name}/include/turbojpeg.h $RPM_BUILD_ROOT/usr/include
-
-%post -p /sbin/ldconfig
-
-%postun -p /sbin/ldconfig
-
-%clean
-rm -rf $RPM_BUILD_ROOT
-
-%files
-%defattr(-,root,root)
-%doc %{_srcdir}/README-turbo.txt %{_srcdir}/README %{_srcdir}/libjpeg.doc %{_srcdir}/LICENSE.txt %{_srcdir}/LGPL.txt
-%dir /opt/%{name}
-%dir /opt/%{name}/%{__lib}
-/opt/%{name}/%{__lib}/libjpeg.so.62.0.0
-/opt/%{name}/%{__lib}/libjpeg.so.62
-/opt/%{name}/%{__lib}/libjpeg.so
-/opt/%{name}/%{__lib}/libjpeg.a
-/usr/%{__lib}/libturbojpeg.so
-/usr/%{__lib}/libturbojpeg.a
-/usr/include/turbojpeg.h
-%dir /opt/%{name}/include
-/opt/%{name}/include/jconfig.h
-/opt/%{name}/include/jerror.h
-/opt/%{name}/include/jmorecfg.h
-/opt/%{name}/include/jpeglib.h
-
-%changelog

release/libjpeg-turbo.spec.in

@@ -0,0 +1,108 @@
+%ifarch x86_64
+%define __lib lib64
+%else
+%define __lib lib
+%endif
+
+Summary: A SIMD-accelerated JPEG codec which provides both the libjpeg and TurboJPEG APIs
+Name: @PACKAGE_NAME@
+Version: @VERSION@
+Vendor: The libjpeg-turbo Project
+URL: http://www.libjpeg-turbo.org
+Group: System Environment/Libraries
+#-->Source0: http://prdownloads.sourceforge.net/libjpeg-turbo/libjpeg-turbo-%{version}.tar.gz
+Release: @BUILD@
+License: wxWindows Library License, v3.1
+BuildRoot: %{_blddir}/%{name}-buildroot-%{version}-%{release}
+Prereq: /sbin/ldconfig
+Provides: %{name} = %{version}-%{release}, turbojpeg = 2.00
+Obsoletes: turbojpeg
+
+%description
+libjpeg-turbo is a derivative of libjpeg which uses SIMD instructions (MMX,
+SSE2, etc.) to accelerate baseline JPEG compression and decompression on x86
+and x86-64 systems.  On such systems, libjpeg-turbo is generally 2-4x as fast
+as the unmodified version of libjpeg, all else being equal.  libjpeg-turbo also
+includes a wrapper library which implements the TurboJPEG API used by VirtualGL
+and TurboVNC.
+
+libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but
+the TigerVNC and VirtualGL projects made numerous enhancements to the codec in
+2009, including improved support for Mac OS X, 64-bit support, support for
+32-bit and big endian pixel formats (RGBX, XBGR, etc.), accelerated Huffman
+encoding/decoding, and various bug fixes.  The goal was to produce a fully open
+source codec that could replace the partially closed source TurboJPEG/IPP codec
+used by VirtualGL and TurboVNC.  libjpeg-turbo generally performs in the range
+of 80-120% of TurboJPEG/IPP.  It is faster in some areas but slower in others.
+
+In early 2010, libjpeg-turbo spun off into its own independent project, with
+the goal of making high-speed JPEG compression/decompression technology
+available to a broader range of users and developers.
+
+#-->%prep
+#-->%setup -q
+
+#-->%build
+#-->./configure libdir=/opt/%{name}/%{__lib} mandir=/opt/%{name}/man JPEG_LIB_VERSION=@JPEG_LIB_VERSION@ SO_MAJOR_VERSION=@SO_MAJOR_VERSION@ SO_MINOR_VERSION=@SO_MINOR_VERSION@ --with-pic
+#-->make DESTDIR=$RPM_BUILD_ROOT libdir=/opt/%{name}/%{__lib} mandir=/opt/%{name}/man
+
+%install
+
+rm -rf $RPM_BUILD_ROOT
+make install DESTDIR=$RPM_BUILD_ROOT libdir=/opt/%{name}/%{__lib} mandir=/opt/%{name}/man
+rm -f $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/*.la
+mkdir -p $RPM_BUILD_ROOT/usr/%{__lib}
+mv $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/libturbojpeg.* $RPM_BUILD_ROOT/usr/%{__lib}
+/sbin/ldconfig -n $RPM_BUILD_ROOT/opt/%{name}/%{__lib}
+/sbin/ldconfig -n $RPM_BUILD_ROOT/usr/%{__lib}
+mkdir -p $RPM_BUILD_ROOT/usr/include
+mv $RPM_BUILD_ROOT/opt/%{name}/include/turbojpeg.h $RPM_BUILD_ROOT/usr/include
+ln -fs /usr/include/turbojpeg.h $RPM_BUILD_ROOT/opt/%{name}/include/
+ln -fs /usr/%{__lib}/libturbojpeg.a $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/
+
+%post -p /sbin/ldconfig
+
+%postun -p /sbin/ldconfig
+
+%clean
+rm -rf $RPM_BUILD_ROOT
+
+%files
+%defattr(-,root,root)
+%doc %{_srcdir}/README-turbo.txt %{_srcdir}/README %{_srcdir}/libjpeg.txt %{_srcdir}/usage.txt %{_srcdir}/LICENSE.txt %{_srcdir}/LGPL.txt
+%dir /opt/%{name}
+%dir /opt/%{name}/bin
+/opt/%{name}/bin/cjpeg
+/opt/%{name}/bin/djpeg
+/opt/%{name}/bin/jpegtran
+/opt/%{name}/bin/jpgtest
+/opt/%{name}/bin/rdjpgcom
+/opt/%{name}/bin/wrjpgcom
+%dir /opt/%{name}/%{__lib}
+%ifarch x86_64
+%else
+/opt/%{name}/lib32
+%endif
+/opt/%{name}/%{__lib}/libjpeg.so.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@
+/opt/%{name}/%{__lib}/libjpeg.so.@SO_MAJOR_VERSION@
+/opt/%{name}/%{__lib}/libjpeg.so
+/opt/%{name}/%{__lib}/libjpeg.a
+/opt/%{name}/%{__lib}/libturbojpeg.a
+/usr/%{__lib}/libturbojpeg.so
+/usr/%{__lib}/libturbojpeg.a
+/usr/include/turbojpeg.h
+%dir /opt/%{name}/include
+/opt/%{name}/include/jconfig.h
+/opt/%{name}/include/jerror.h
+/opt/%{name}/include/jmorecfg.h
+/opt/%{name}/include/jpeglib.h
+/opt/%{name}/include/turbojpeg.h
+%dir /opt/%{name}/man
+%dir /opt/%{name}/man/man1
+/opt/%{name}/man/man1/cjpeg.1*
+/opt/%{name}/man/man1/djpeg.1*
+/opt/%{name}/man/man1/jpegtran.1*
+/opt/%{name}/man/man1/rdjpgcom.1*
+/opt/%{name}/man/man1/wrjpgcom.1*
+
+%changelog

release/makecygwinpkg.in

@@ -0,0 +1,42 @@
+#!/bin/sh
+
+set -u
+set -e
+trap onexit INT
+trap onexit TERM
+trap onexit EXIT
+
+TMPDIR=
+
+onexit()
+{
+	if [ ! "$TMPDIR" = "" ]; then
+		rm -rf $TMPDIR
+	fi
+}
+
+PACKAGE_NAME=@PACKAGE_NAME@
+VERSION=@VERSION@
+SRCDIR=@abs_top_srcdir@
+
+umask 022
+rm -f $PACKAGE_NAME-$VERSION-cygwin.tar.bz2
+TMPDIR=`mktemp -d /tmp/ljtbuild.XXXXXX`
+__PWD=`pwd`
+make install DESTDIR=$TMPDIR/pkg mandir=/opt/$PACKAGE_NAME/man
+rm $TMPDIR/pkg/opt/$PACKAGE_NAME/lib/*.la
+DOCDIR=$TMPDIR/pkg/usr/share/doc/$PACKAGE_NAME-$VERSION
+mkdir -p $DOCDIR
+install -m 644 $SRCDIR/README-turbo.txt $DOCDIR
+install -m 644 $SRCDIR/README $DOCDIR
+install -m 644 $SRCDIR/libjpeg.txt $DOCDIR
+install -m 644 $SRCDIR/usage.txt $DOCDIR
+install -m 644 $SRCDIR/LICENSE.txt $DOCDIR
+install -m 644 $SRCDIR/LGPL.txt $DOCDIR
+ln -fs lib $TMPDIR/pkg/opt/$PACKAGE_NAME/lib32
+cd $TMPDIR/pkg
+tar cfj ../$PACKAGE_NAME-$VERSION-cygwin.tar.bz2 *
+cd $__PWD
+mv $TMPDIR/*.tar.bz2 .
+
+exit 0

release/makedpkg

@@ -1,56 +0,0 @@
-#!/bin/sh
-
-set -u
-set -e
-trap onexit INT
-trap onexit TERM
-trap onexit EXIT
-
-TMPDIR=
-
-onexit()
-{
-	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
-	fi
-}
-
-usage()
-{
-	echo "$0 <package name> <version> <build> <DEB architecture> <source dir.>"
-	exit 1
-}
-
-if [ $# -lt 5 ]; then usage $0; fi
-PACKAGE_NAME=$1
-VERSION=$2
-BUILD=$3
-DEBARCH=$4
-SRCDIR=$5
-
-umask 022
-rm -f $PACKAGE_NAME\_$DEBARCH.deb
-TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
-mkdir $TMPDIR/DEBIAN
-(cat $SRCDIR/release/deb-control.tmpl | sed s/{__PKGNAME}/$PACKAGE_NAME/g \
-	| sed s/{__VERSION}/$VERSION/g | sed s/{__BUILD}/$BUILD/g \
-	| sed s/{__ARCH}/$DEBARCH/g > $TMPDIR/DEBIAN/control)
-
-if [ "$DEBARCH" = "amd64" ]; then
-	__LIB=lib
-else
-	__LIB=lib32
-fi
-make install prefix=$TMPDIR/opt/$PACKAGE_NAME libdir=$TMPDIR/opt/$PACKAGE_NAME/$__LIB
-rm -f $TMPDIR/opt/$PACKAGE_NAME/$__LIB/*.la
-mkdir -p $TMPDIR/usr/$__LIB
-mv $TMPDIR/opt/$PACKAGE_NAME/$__LIB/libturbojpeg.* $TMPDIR/usr/$__LIB
-/sbin/ldconfig -n $TMPDIR/opt/$PACKAGE_NAME/$__LIB
-/sbin/ldconfig -n $TMPDIR/usr/$__LIB
-mkdir -p $TMPDIR/usr/include
-mv $TMPDIR/opt/$PACKAGE_NAME/include/turbojpeg.h $TMPDIR/usr/include
-
-sudo chown -Rh root:root $TMPDIR/*
-dpkg -b $TMPDIR $PACKAGE_NAME\_$DEBARCH.deb
-
-exit

release/makedpkg.in

@@ -0,0 +1,85 @@
+#!/bin/sh
+
+set -u
+set -e
+trap onexit INT
+trap onexit TERM
+trap onexit EXIT
+
+TMPDIR=
+
+onexit()
+{
+	if [ ! "$TMPDIR" = "" ]; then
+		sudo rm -rf $TMPDIR
+	fi
+}
+
+makedeb()
+{
+	SUPPLEMENT=$1
+	DIRNAME=$PACKAGE_NAME
+
+	if [ $SUPPLEMENT = 1 ]; then
+		PACKAGE_NAME=$PACKAGE_NAME\32
+		DEBARCH=amd64
+		__LIB=lib32
+	else
+		__LIB=lib
+	fi
+
+	umask 022
+	rm -f $PACKAGE_NAME\_$VERSION\_$DEBARCH.deb
+	TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
+	mkdir $TMPDIR/DEBIAN
+	cp pkgscripts/deb-control $TMPDIR/DEBIAN/control
+
+	make install prefix=$TMPDIR/opt/$DIRNAME libdir=$TMPDIR/opt/$DIRNAME/$__LIB mandir=$TMPDIR/opt/$DIRNAME/man
+	rm -f $TMPDIR/opt/$DIRNAME/$__LIB/*.la
+
+	if [ $SUPPLEMENT = 1 ]; then
+		rm -rf $TMPDIR/opt/$DIRNAME/include
+		rm -rf $TMPDIR/opt/$DIRNAME/man
+		rm -rf $TMPDIR/opt/$DIRNAME/bin
+	fi
+
+	mkdir -p $TMPDIR/usr/$__LIB
+	mv $TMPDIR/opt/$DIRNAME/$__LIB/libturbojpeg.* $TMPDIR/usr/$__LIB
+	ln -fs /usr/$__LIB/libturbojpeg.a $TMPDIR/opt/$DIRNAME/$__LIB/
+	/sbin/ldconfig -n $TMPDIR/opt/$DIRNAME/$__LIB
+	/sbin/ldconfig -n $TMPDIR/usr/$__LIB
+
+	if [ ! $SUPPLEMENT = 1 ]; then
+		if [ "$DEBARCH" = "amd64" ]; then
+			ln -fs lib $TMPDIR/opt/$DIRNAME/lib64
+		else
+			if [ ! "$__LIB" = "lib32" ]; then
+				ln -fs lib $TMPDIR/opt/$DIRNAME/lib32
+			fi
+		fi
+		mkdir -p $TMPDIR/usr/include
+		mv $TMPDIR/opt/$DIRNAME/include/turbojpeg.h $TMPDIR/usr/include
+		ln -fs /usr/include/turbojpeg.h $TMPDIR/opt/$DIRNAME/include/
+		mkdir -p $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/LICENSE.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/LGPL.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/README-turbo.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/README $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/libjpeg.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/usage.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+	fi
+
+	sudo chown -Rh root:root $TMPDIR/*
+	dpkg -b $TMPDIR $PACKAGE_NAME\_$VERSION\_$DEBARCH.deb
+}
+
+PACKAGE_NAME=@PACKAGE_NAME@
+VERSION=@VERSION@
+BUILD=@BUILD@
+DEBARCH=@DEBARCH@
+SRCDIR=@abs_top_srcdir@
+
+makedeb 0
+if [ "$DEBARCH" = "i386" ]; then makedeb 1; fi
+
+exit

release/makemacpkg

@@ -1,126 +0,0 @@
-#!/bin/sh
-
-set -u
-set -e
-trap onexit INT
-trap onexit TERM
-trap onexit EXIT
-
-TMPDIR=
-
-onexit()
-{
-	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
-	fi
-}
-
-usage()
-{
-	echo "$0 <package name> <version> <build> <source dir.> [universal]"
-	exit 1
-}
-
-UNIVERSAL=0
-
-if [ $# -lt 4 ]; then usage $0; fi
-PACKAGE_NAME=$1
-VERSION=$2
-BUILD=$3
-SRCDIR=$4
-if [ $# -gt 4 ]; then
-	if [ "$5" = "universal" ]; then UNIVERSAL=1; fi
-fi
-PACKAGEMAKER=/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker
-
-if [ -f $PACKAGE_NAME.dmg ]; then
-	rm -f $PACKAGE_NAME.dmg
-fi
-
-umask 022
-TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
-PKGROOT=$TMPDIR/pkg/Package_Root
-mkdir -p $PKGROOT
-mkdir -p $PKGROOT/opt/$PACKAGE_NAME/bin
-make install prefix=$PKGROOT/opt/$PACKAGE_NAME
-rm -f $PKGROOT/opt/$PACKAGE_NAME/lib/*.la
-mkdir -p $PKGROOT/usr/lib
-mv $PKGROOT/opt/$PACKAGE_NAME/lib/libturbojpeg.* $PKGROOT/usr/lib
-mkdir -p $PKGROOT/usr/include
-mv $PKGROOT/opt/$PACKAGE_NAME/include/turbojpeg.h $PKGROOT/usr/include
-
-if [ $UNIVERSAL = 1 ]; then
-	if [ ! -d $SRCDIR/osxx86 ]; then
-		mkdir -p $SRCDIR/osxx86
-	fi
-	mkdir -p $TMPDIR/dist.x86
-	pushd $SRCDIR/osxx86
-	sh $SRCDIR/configure --with-pic \
-		CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4 -O3 -m32' \
-		CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4 -O3 -m32' \
-		LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4 -m32'
-	make prefix=$TMPDIR/dist.x86 install
-	popd
-	if [ ! -h $TMPDIR/dist.x86/lib/libjpeg.62.dylib -a \
-		! -h $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib ]; then
-		lipo -create -arch i386 $TMPDIR/dist.x86/lib/libjpeg.62.dylib -arch x86_64 \
-			$PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib \
-			-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib
-	elif [ ! -h $TMPDIR/dist.x86/lib/libjpeg.62.0.0.dylib -a \
-		! -h $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib ]; then
-		lipo -create -arch i386 $TMPDIR/dist.x86/lib/libjpeg.62.0.0.dylib \
-			-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib \
-			-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib
-	fi
-	lipo -create -arch i386 $TMPDIR/dist.x86/lib/libjpeg.a -arch x86_64 \
-		$PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.a \
-		-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.a
-	lipo -create -arch i386 $TMPDIR/dist.x86/lib/libturbojpeg.dylib -arch x86_64 \
-		$PKGROOT/usr/lib/libturbojpeg.dylib \
-		-output $PKGROOT/usr/lib/libturbojpeg.dylib
-	lipo -create -arch i386 $TMPDIR/dist.x86/lib/libturbojpeg.a -arch x86_64 \
-		$PKGROOT/usr/lib/libturbojpeg.a \
-		-output $PKGROOT/usr/lib/libturbojpeg.a
-fi
-
-install_name_tool -id /opt/$PACKAGE_NAME/lib/libjpeg.62.dylib $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib
-install_name_tool -id libturbojpeg.dylib $PKGROOT/usr/lib/libturbojpeg.dylib
-
-mkdir -p $PKGROOT/Library/Documentation/$PACKAGE_NAME
-chmod 1775 $PKGROOT/Library
-chmod 775 $PKGROOT/Library/Documentation 
-mkdir -p $TMPDIR/pkg/Resources 
-
-(cat $SRCDIR/release/Description.plist.tmpl | sed s/{__VERSION}/$VERSION/g \
-	| sed s/{__APPNAME}/$PACKAGE_NAME/g \
-	> $TMPDIR/pkg/Description.plist) 
-(cat $SRCDIR/release/Info.plist.tmpl | sed s/{__VERSION}/$VERSION/g	\
-	| sed s/{__BUILD}/$BUILD/g > $TMPDIR/pkg/Info.plist) 
-(cat $SRCDIR/release/uninstall.sh.tmpl \
-	| sed s/{__APPNAME}/$PACKAGE_NAME/g \
-	> $PKGROOT/opt/$PACKAGE_NAME/bin/uninstall) 
-chmod 755 $PKGROOT/opt/$PACKAGE_NAME/bin/uninstall
-
-install -m 644 $SRCDIR/LICENSE.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/LICENSE.txt 
-install -m 644 $SRCDIR/LGPL.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/LGPL.txt 
-install -m 644 $SRCDIR/README-turbo.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/README-turbo.txt 
-install -m 644 $SRCDIR/README $PKGROOT/Library/Documentation/$PACKAGE_NAME/README 
-install -m 644 $SRCDIR/libjpeg.doc $PKGROOT/Library/Documentation/$PACKAGE_NAME/libjpeg.doc 
-
-sudo chown -R root:admin $PKGROOT 
-sudo chown -R root:0 $PKGROOT/usr 
-cp $SRCDIR/release/License.rtf $SRCDIR/release/Welcome.rtf $SRCDIR/release/ReadMe.rtf $TMPDIR/pkg/Resources/ 
-
-mkdir $TMPDIR/dmg
-$PACKAGEMAKER -build -v -p $TMPDIR/dmg/$PACKAGE_NAME.pkg \
-	-f $PKGROOT -r $TMPDIR/pkg/Resources \
-	-i $TMPDIR/pkg/Info.plist -d $TMPDIR/pkg/Description.plist 
-install -m 644 $SRCDIR/release/uninstall.applescript $TMPDIR 
-sudo osacompile -t APPL -o "$TMPDIR/dmg/Uninstall $PACKAGE_NAME.app" $TMPDIR/uninstall.applescript 
-sudo chown -R $USER "$TMPDIR/dmg/Uninstall $PACKAGE_NAME.app" 
-hdiutil create -fs HFS+ -volname $PACKAGE_NAME-$VERSION \
-	-srcfolder "$TMPDIR/dmg" \
-	$TMPDIR/$PACKAGE_NAME.dmg 
-cp $TMPDIR/$PACKAGE_NAME.dmg . 
-
-exit

release/makemacpkg.in

@@ -0,0 +1,163 @@
+#!/bin/sh
+
+set -u
+set -e
+trap onexit INT
+trap onexit TERM
+trap onexit EXIT
+
+TMPDIR=
+
+onexit()
+{
+	if [ ! "$TMPDIR" = "" ]; then
+		sudo rm -rf $TMPDIR
+	fi
+}
+
+usage()
+{
+	echo "$0 [universal [32-bit build dir]]"
+	exit 1
+}
+
+UNIVERSAL=0
+
+PACKAGE_NAME=@PACKAGE_NAME@
+VERSION=@VERSION@
+BUILD=@BUILD@
+SRCDIR=@abs_top_srcdir@
+BUILDDIR32=@abs_top_srcdir@/osxx86
+if [ $# -gt 0 ]; then
+	if [ "$1" = "universal" ]; then
+		UNIVERSAL=1
+		if [ $# -gt 1 ]; then BUILDDIR32=$2; fi
+	fi
+fi
+PACKAGEMAKER=/Developer/Applications/Utilities/PackageMaker.app/Contents/MacOS/PackageMaker
+
+if [ -f $PACKAGE_NAME-$VERSION.dmg ]; then
+	rm -f $PACKAGE_NAME-$VERSION.dmg
+fi
+
+umask 022
+TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
+PKGROOT=$TMPDIR/pkg/Package_Root
+mkdir -p $PKGROOT
+mkdir -p $PKGROOT/opt/$PACKAGE_NAME/bin
+make install DESTDIR=$PKGROOT mandir=/opt/$PACKAGE_NAME/man
+rm -f $PKGROOT/opt/$PACKAGE_NAME/lib/*.la
+mkdir -p $PKGROOT/usr/lib
+mv $PKGROOT/opt/$PACKAGE_NAME/lib/libturbojpeg.* $PKGROOT/usr/lib
+mkdir -p $PKGROOT/usr/include
+mv $PKGROOT/opt/$PACKAGE_NAME/include/turbojpeg.h $PKGROOT/usr/include
+
+if [ $UNIVERSAL = 1 ]; then
+	if [ ! -d $BUILDDIR32 ]; then
+		echo ERROR: 32-bit build directory $BUILDDIR32 does not exist
+		exit 1
+	fi
+	if [ ! -f $BUILDDIR32/Makefile ]; then
+		echo ERROR: 32-bit build directory $BUILDDIR32 is not configured
+		exit 1
+	fi
+	mkdir -p $TMPDIR/dist.x86
+	pushd $BUILDDIR32
+	make install DESTDIR=$TMPDIR/dist.x86
+	popd
+	if [ ! -h $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.dylib -a \
+		! -h $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.dylib ]; then
+		lipo -create \
+			-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.dylib \
+			-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.dylib \
+			-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.dylib
+	elif [ ! -h $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@.dylib -a \
+		! -h $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@.dylib ]; then
+		lipo -create \
+			-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@.dylib \
+			-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@.dylib \
+			-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@.dylib
+	fi
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.a \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.a \
+		-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.a
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libturbojpeg.dylib \
+		-arch x86_64 $PKGROOT/usr/lib/libturbojpeg.dylib \
+		-output $PKGROOT/usr/lib/libturbojpeg.dylib
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libturbojpeg.a \
+		-arch x86_64 $PKGROOT/usr/lib/libturbojpeg.a \
+		-output $PKGROOT/usr/lib/libturbojpeg.a
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/cjpeg \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/cjpeg \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/cjpeg
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/djpeg \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/djpeg \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/djpeg
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/jpegtran \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/jpegtran \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/jpegtran
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/jpgtest \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/jpgtest \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/jpgtest
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/rdjpgcom \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/rdjpgcom \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/rdjpgcom
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/wrjpgcom \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/wrjpgcom \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/wrjpgcom
+
+fi
+
+install_name_tool -id /opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.dylib $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.@SO_MAJOR_VERSION@.dylib
+install_name_tool -id libturbojpeg.dylib $PKGROOT/usr/lib/libturbojpeg.dylib
+
+ln -fs /usr/include/turbojpeg.h $PKGROOT/opt/$PACKAGE_NAME/include/
+ln -fs /usr/lib/libturbojpeg.a $PKGROOT/opt/$PACKAGE_NAME/lib/
+if [ ! -h $PKGROOT/opt/$PACKAGE_NAME/lib32 ]; then
+	ln -fs lib $PKGROOT/opt/$PACKAGE_NAME/lib32
+fi
+if [ ! -h $PKGROOT/opt/$PACKAGE_NAME/lib64 ]; then
+	ln -fs lib $PKGROOT/opt/$PACKAGE_NAME/lib64
+fi
+
+mkdir -p $PKGROOT/Library/Documentation/$PACKAGE_NAME
+chmod 1775 $PKGROOT/Library
+chmod 775 $PKGROOT/Library/Documentation 
+mkdir -p $TMPDIR/pkg/Resources 
+
+cp pkgscripts/Description.plist $TMPDIR/pkg/
+cp pkgscripts/Info.plist $TMPDIR/pkg/
+install -m 755 pkgscripts/uninstall $PKGROOT/opt/$PACKAGE_NAME/bin/
+
+install -m 644 $SRCDIR/LICENSE.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/LICENSE.txt 
+install -m 644 $SRCDIR/LGPL.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/LGPL.txt 
+install -m 644 $SRCDIR/README-turbo.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/README-turbo.txt 
+install -m 644 $SRCDIR/README $PKGROOT/Library/Documentation/$PACKAGE_NAME/README 
+install -m 644 $SRCDIR/libjpeg.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/libjpeg.txt 
+install -m 644 $SRCDIR/usage.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/usage.txt 
+
+sudo chown -R root:admin $PKGROOT 
+sudo chown -R root:0 $PKGROOT/usr 
+cp $SRCDIR/release/License.rtf $SRCDIR/release/Welcome.rtf $SRCDIR/release/ReadMe.rtf $TMPDIR/pkg/Resources/ 
+
+mkdir $TMPDIR/dmg
+$PACKAGEMAKER -build -v -p $TMPDIR/dmg/$PACKAGE_NAME.pkg \
+	-f $PKGROOT -r $TMPDIR/pkg/Resources \
+	-i $TMPDIR/pkg/Info.plist -d $TMPDIR/pkg/Description.plist 
+install -m 644 $SRCDIR/release/uninstall.applescript $TMPDIR 
+sudo osacompile -t APPL -o "$TMPDIR/dmg/Uninstall $PACKAGE_NAME.app" $TMPDIR/uninstall.applescript 
+sudo chown -R $USER "$TMPDIR/dmg/Uninstall $PACKAGE_NAME.app" 
+hdiutil create -fs HFS+ -volname $PACKAGE_NAME-$VERSION \
+	-srcfolder "$TMPDIR/dmg" $TMPDIR/$PACKAGE_NAME-$VERSION.dmg 
+cp $TMPDIR/$PACKAGE_NAME-$VERSION.dmg . 
+
+exit

release/makerpm

@@ -1,42 +0,0 @@
-#!/bin/sh
-
-set -u
-set -e
-trap onexit INT
-trap onexit TERM
-trap onexit EXIT
-
-TMPDIR=
-
-onexit()
-{
-	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
-	fi
-}
-
-usage()
-{
-	echo "$0 <package name> <version> <build> <RPM architecture> <source dir.>"
-	exit 1
-}
-
-if [ $# -lt 5 ]; then usage $0; fi
-PACKAGE_NAME=$1
-VERSION=$2
-BUILD=$3
-RPMARCH=$4
-SRCDIR=$5
-
-TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
-mkdir -p $TMPDIR/RPMS
-ln -fs `pwd` $TMPDIR/BUILD
-rm -f $PACKAGE_NAME.$RPMARCH.rpm
-rpmbuild -bb --define "_name $PACKAGE_NAME" \
-	--define "_blddir $TMPDIR/buildroot" --define "_topdir $TMPDIR" \
-	--define "_version $VERSION" --define "_build $BUILD" \
-	--define "_srcdir $SRCDIR" --target $RPMARCH \
-	$SRCDIR/release/libjpeg-turbo.spec
-cp $TMPDIR/RPMS/$RPMARCH/$PACKAGE_NAME-$VERSION-$BUILD.$RPMARCH.rpm $PACKAGE_NAME.$RPMARCH.rpm
-
-exit

release/makesrpm

@@ -1,51 +0,0 @@
-#!/bin/sh
-
-set -u
-set -e
-trap onexit INT
-trap onexit TERM
-trap onexit EXIT
-
-TMPDIR=
-
-onexit()
-{
-	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
-	fi
-}
-
-usage()
-{
-	echo "$0 <package name> <version> <build> <RPM architecture> <source dir.>"
-	exit 1
-}
-
-if [ $# -lt 4 ]; then usage $0; fi
-PACKAGE_NAME=$1
-VERSION=$2
-BUILD=$3
-SRCDIR=$4
-
-TARBALL=$PACKAGE_NAME-$VERSION.tar.gz
-if [ ! -f ./$TARBALL ]; then
-	echo ./$TARBALL does not exist.  Run make dist-gzip first.
-	exit -1
-fi
-
-TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
-mkdir -p $TMPDIR/RPMS
-mkdir -p $TMPDIR/SRPMS
-mkdir -p $TMPDIR/BUILD
-mkdir -p $TMPDIR/SOURCES
-mkdir -p $TMPDIR/SPECS
-rm -f $PACKAGE_NAME.src.rpm
-cp $TARBALL $TMPDIR/SOURCES
-cat $SRCDIR/release/libjpeg-turbo.spec | sed s/%{_name}/$PACKAGE_NAME/g \
-	| sed s/%{_version}/$VERSION/g | sed s/%{_build}/$BUILD/g \
-	| sed s/%{_blddir}/%{_tmppath}/g | sed s@%{_srcdir}/@@g \
-	| sed s/#--\>//g >$TMPDIR/SPECS/libjpeg-turbo.spec
-rpmbuild -bs --define "_topdir $TMPDIR" $TMPDIR/SPECS/libjpeg-turbo.spec
-cp $TMPDIR/SRPMS/$PACKAGE_NAME-$VERSION-$BUILD.src.rpm $PACKAGE_NAME.src.rpm
-
-exit

release/makesunpkg

@@ -1,118 +0,0 @@
-#!/bin/sh
-
-set -u
-set -e
-trap onexit INT
-trap onexit TERM
-trap onexit EXIT
-
-TMPDIR=
-
-onexit()
-{
-	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
-	fi
-}
-
-usage()
-{
-	echo "$0 <package name> <version> <build> <package architecture> <source dir.> [combined]"
-	exit 1
-}
-
-COMBINED=0
-
-if [ $# -lt 4 ]; then usage $0; fi
-PACKAGE_NAME=$1
-VERSION=$2
-BUILD=$3
-PKGARCH=$4
-SRCDIR=$5
-CC=$6
-CXX=$7
-if [ $# -gt 7 ]; then
-	if [ "$8" = "combined" ]; then COMBINED=1; fi
-fi
-
-umask 022
-TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
-rm -f $PACKAGE_NAME.pkg.bz2
-PKGROOT=$TMPDIR/pkgbuild/$PACKAGE_NAME
-mkdir -p $PKGROOT
-cp $SRCDIR/release/copyright $TMPDIR
-touch $TMPDIR/depend
-cat $SRCDIR/release/pkginfo.tmpl | sed s/{__VERSION}/$VERSION/g \
-	| sed s/{__BUILD}/$BUILD/g | sed s/{__APPNAME}/$PACKAGE_NAME/g \
-	| sed s/{__PKGNAME}/$PACKAGE_NAME/g > $TMPDIR/pkginfo 
-
-if [ "$PKGARCH" = "i386" ]; then
-	__LIB=lib
-else
-	__LIB=lib/$PKGARCH
-fi
-
-# This mess is to work around a bug in /usr/ccs/bin/make
-make install prefix=$PKGROOT libdir=$PKGROOT/$__LIB AM_MAKEFLAGS="prefix=$PKGROOT libdir=$PKGROOT/$__LIB"
-rm -f $PKGROOT/$__LIB/*.la
-if [ $COMBINED = 1 ]; then
-	if [ ! -d $SRCDIR/solx86 ]; then
-		mkdir -p $SRCDIR/solx86
-	fi
-	PWD=`pwd`
-	cd $SRCDIR/solx86
-	sh $SRCDIR/configure --with-pic CC=$CC CXX=$CXX CFLAGS= CXXFLAGS= LDFLAGS= host_alias=
-	make install prefix=$PKGROOT AM_MAKEFLAGS="prefix=$PKGROOT"
-	cd $PWD
-fi
-mkdir -p $PKGROOT/doc
-cp $SRCDIR/LICENSE.txt $SRCDIR/LGPL.txt $SRCDIR/README-turbo.txt $SRCDIR/README $SRCDIR/libjpeg.doc $PKGROOT/doc
-chmod 644 $PKGROOT/doc/*
-
-cat >$TMPDIR/proto <<EOF
-i copyright
-i depend
-i pkginfo
-d none libjpeg-turbo 0755 root bin
-d none libjpeg-turbo/lib 0755 root bin
-EOF
-if [ $COMBINED = 1 ]; then
-cat >>$TMPDIR/proto <<EOF
-f none libjpeg-turbo/lib/libjpeg.so.62.0.0 0755 root bin
-s none libjpeg-turbo/lib/libjpeg.so.62=libjpeg.so.62.0.0
-s none libjpeg-turbo/lib/libjpeg.so=libjpeg.so.62.0.0
-f none libjpeg-turbo/lib/libjpeg.a 0644 root bin
-f none libjpeg-turbo/lib/libturbojpeg.so 0755 root bin
-f none libjpeg-turbo/lib/libturbojpeg.a 0644 root bin
-EOF
-fi
-if [ "${__LIB}" != "lib" ]; then
-echo d none libjpeg-turbo/${__LIB} 0755 root bin >>$TMPDIR/proto
-fi
-cat >>$TMPDIR/proto <<EOF
-f none libjpeg-turbo/${__LIB}/libjpeg.so.62.0.0 0755 root bin
-s none libjpeg-turbo/${__LIB}/libjpeg.so.62=libjpeg.so.62.0.0
-s none libjpeg-turbo/${__LIB}/libjpeg.so=libjpeg.so.62.0.0
-f none libjpeg-turbo/${__LIB}/libjpeg.a 0644 root bin
-f none libjpeg-turbo/${__LIB}/libturbojpeg.so 0755 root bin
-f none libjpeg-turbo/${__LIB}/libturbojpeg.a 0644 root bin
-d none libjpeg-turbo/include 0755 root bin
-f none libjpeg-turbo/include/jconfig.h 0644 root bin
-f none libjpeg-turbo/include/jerror.h 0644 root bin
-f none libjpeg-turbo/include/jmorecfg.h 0644 root bin
-f none libjpeg-turbo/include/jpeglib.h 0644 root bin
-f none libjpeg-turbo/include/turbojpeg.h 0644 root bin
-d none libjpeg-turbo/doc 0755 root bin
-f none libjpeg-turbo/doc/LGPL.txt 0644 root bin
-f none libjpeg-turbo/doc/libjpeg.doc 0644 root bin
-f none libjpeg-turbo/doc/LICENSE.txt 0644 root bin
-f none libjpeg-turbo/doc/README 0644 root bin
-f none libjpeg-turbo/doc/README-turbo.txt 0644 root bin
-EOF
-
-pkgmk -o -r $TMPDIR/pkgbuild -d $TMPDIR -a i386 -f $TMPDIR/proto
-pkgtrans -s $TMPDIR $TMPDIR/$PACKAGE_NAME.pkg $PACKAGE_NAME
-bzip2 $TMPDIR/$PACKAGE_NAME.pkg
-cp $TMPDIR/$PACKAGE_NAME.pkg.bz2 . 
-
-exit

release/makesunpkg.in

@@ -0,0 +1,137 @@
+#!/bin/sh
+
+set -u
+set -e
+trap onexit INT
+trap onexit TERM
+trap onexit EXIT
+
+TMPDIR=
+
+onexit()
+{
+	if [ ! "$TMPDIR" = "" ]; then
+		rm -rf $TMPDIR
+	fi
+}
+
+usage()
+{
+	echo "$0 [combined [32-bit build dir.]]"
+	exit 1
+}
+
+COMBINED=0
+
+PACKAGE_NAME=@PACKAGE_NAME@
+VERSION=@VERSION@
+BUILD=@BUILD@
+PKGARCH=@DEBARCH@
+SRCDIR=@abs_top_srcdir@
+BUILDDIR32=@abs_top_srcdir@/solx86
+if [ $# -gt 0 ]; then
+	if [ "$1" = "combined" ]; then
+		COMBINED=1
+		if [ $# -gt 1 ]; then	BUILDDIR32=$2; fi
+	fi
+fi
+
+umask 022
+TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
+rm -f $PACKAGE_NAME.pkg.bz2
+cp $SRCDIR/release/copyright $TMPDIR
+touch $TMPDIR/depend
+cp pkgscripts/pkginfo $TMPDIR/pkginfo 
+
+if [ "$PKGARCH" = "i386" ]; then
+	__LIB=lib
+else
+	__LIB=lib/$PKGARCH
+fi
+
+if [ $COMBINED = 1 ]; then
+	if [ ! -d $BUILDDIR32 ]; then
+		echo ERROR: 32-bit build directory $BUILDDIR32 does not exist
+		exit 1
+	fi
+	if [ ! -f $BUILDDIR32/Makefile ]; then
+		echo ERROR: 32-bit build directory $BUILDDIR32 is not configured
+		exit 1
+	fi
+	PWD=`pwd`
+	cd $BUILDDIR32
+	make install DESTDIR=$TMPDIR mandir=/opt/$PACKAGE_NAME/man AM_MAKEFLAGS="mandir=/opt/$PACKAGE_NAME/man"
+	cd $PWD
+fi
+# This mess is to work around a bug in /usr/ccs/bin/make
+make install DESTDIR=$TMPDIR libdir=/opt/$PACKAGE_NAME/$__LIB mandir=/opt/$PACKAGE_NAME/man AM_MAKEFLAGS="libdir=/opt/$PACKAGE_NAME/$__LIB mandir=/opt/$PACKAGE_NAME/man"
+rm -f $TMPDIR/opt/$PACKAGE_NAME/$__LIB/*.la
+mkdir -p $TMPDIR/opt/$PACKAGE_NAME/doc
+cp $SRCDIR/LICENSE.txt $SRCDIR/LGPL.txt $SRCDIR/README-turbo.txt $SRCDIR/README $SRCDIR/libjpeg.txt $SRCDIR/usage.txt $TMPDIR/opt/$PACKAGE_NAME/doc
+chmod 644 $TMPDIR/opt/$PACKAGE_NAME/doc/*
+
+cat >$TMPDIR/proto <<EOF
+i copyright
+i depend
+i pkginfo
+d none $PACKAGE_NAME 0755 root bin
+d none $PACKAGE_NAME/bin 0755 root bin
+f none $PACKAGE_NAME/bin/cjpeg 0755 root bin
+f none $PACKAGE_NAME/bin/djpeg 0755 root bin
+f none $PACKAGE_NAME/bin/jpegtran 0755 root bin
+f none $PACKAGE_NAME/bin/jpgtest 0755 root bin
+f none $PACKAGE_NAME/bin/rdjpgcom 0755 root bin
+f none $PACKAGE_NAME/bin/wrjpgcom 0755 root bin
+d none $PACKAGE_NAME/lib 0755 root bin
+EOF
+if [ $COMBINED = 1 ]; then
+cat >>$TMPDIR/proto <<EOF
+f none $PACKAGE_NAME/lib/libjpeg.so.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@ 0755 root bin
+s none $PACKAGE_NAME/lib/libjpeg.so.@SO_MAJOR_VERSION@=libjpeg.so.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@
+s none $PACKAGE_NAME/lib/libjpeg.so=libjpeg.so.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@
+f none $PACKAGE_NAME/lib/libjpeg.a 0644 root bin
+f none $PACKAGE_NAME/lib/libturbojpeg.so 0755 root bin
+f none $PACKAGE_NAME/lib/libturbojpeg.a 0644 root bin
+EOF
+fi
+if [ "${__LIB}" != "lib" ]; then
+echo d none $PACKAGE_NAME/${__LIB} 0755 root bin >>$TMPDIR/proto
+echo s none $PACKAGE_NAME/lib64=${__LIB} >>$TMPDIR/proto
+echo s none $PACKAGE_NAME/lib/64=$PKGARCH >>$TMPDIR/proto
+fi
+cat >>$TMPDIR/proto <<EOF
+f none $PACKAGE_NAME/${__LIB}/libjpeg.so.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@ 0755 root bin
+s none $PACKAGE_NAME/${__LIB}/libjpeg.so.@SO_MAJOR_VERSION@=libjpeg.so.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@
+s none $PACKAGE_NAME/${__LIB}/libjpeg.so=libjpeg.so.@SO_MAJOR_VERSION@.0.@SO_MINOR_VERSION@
+f none $PACKAGE_NAME/${__LIB}/libjpeg.a 0644 root bin
+f none $PACKAGE_NAME/${__LIB}/libturbojpeg.so 0755 root bin
+f none $PACKAGE_NAME/${__LIB}/libturbojpeg.a 0644 root bin
+s none $PACKAGE_NAME/lib32=lib
+d none $PACKAGE_NAME/man 0755 root bin
+d none $PACKAGE_NAME/man/man1 0755 root bin
+d none $PACKAGE_NAME/man/man1/cjpeg.1 0644 root bin
+d none $PACKAGE_NAME/man/man1/djpeg.1 0644 root bin
+d none $PACKAGE_NAME/man/man1/jpegtran.1 0644 root bin
+d none $PACKAGE_NAME/man/man1/rdjpgcom.1 0644 root bin
+d none $PACKAGE_NAME/man/man1/wrjpgcom.1 0644 root bin
+d none $PACKAGE_NAME/include 0755 root bin
+f none $PACKAGE_NAME/include/jconfig.h 0644 root bin
+f none $PACKAGE_NAME/include/jerror.h 0644 root bin
+f none $PACKAGE_NAME/include/jmorecfg.h 0644 root bin
+f none $PACKAGE_NAME/include/jpeglib.h 0644 root bin
+f none $PACKAGE_NAME/include/turbojpeg.h 0644 root bin
+d none $PACKAGE_NAME/doc 0755 root bin
+f none $PACKAGE_NAME/doc/LGPL.txt 0644 root bin
+f none $PACKAGE_NAME/doc/libjpeg.txt 0644 root bin
+f none $PACKAGE_NAME/doc/LICENSE.txt 0644 root bin
+f none $PACKAGE_NAME/doc/README 0644 root bin
+f none $PACKAGE_NAME/doc/README-turbo.txt 0644 root bin
+f none $PACKAGE_NAME/doc/usage.txt 0644 root bin
+EOF
+
+pkgmk -o -r $TMPDIR/opt -d $TMPDIR -a i386 -f $TMPDIR/proto
+pkgtrans -s $TMPDIR $TMPDIR/$PACKAGE_NAME-$VERSION.pkg $PACKAGE_NAME
+bzip2 $TMPDIR/$PACKAGE_NAME-$VERSION.pkg
+cp $TMPDIR/$PACKAGE_NAME-$VERSION.pkg.bz2 . 
+
+exit

release/pkginfo.in

@@ -1,12 +1,12 @@
 ARCH=i386
-PKG={__PKGNAME}
-NAME={__APPNAME} SDK and run time libraries
-VERSION={__VERSION},REV={__BUILD}
+PKG=@PACKAGE_NAME@
+NAME=@PACKAGE_NAME@ SDK and run time libraries
+VERSION=@VERSION@,REV=@BUILD@
 SUNW_PKGVERS=1.0
 DESC=A SIMD-accelerated JPEG codec which provides both the libjpeg and TurboJPEG APIs
 VENDOR=The libjpeg-turbo Project
-HOTLINE=http://libjpeg-turbo.VirtualGL.org
-EMAIL=dcommander@users.sourceforge.net
+HOTLINE=http://www.libjpeg-turbo.org
+EMAIL=information@libjpeg-turbo.org
 MAXINST=1
 CATEGORY=application
 BASEDIR=/opt

release/uninstall.in

@@ -1,4 +1,4 @@
-# Copyright (C)2009-2010 D. R. Commander
+# Copyright (C)2009-2011 D. R. Commander
 # Copyright (C)2009 Sun Microsystems, Inc.
 #
 # This library is free software and may be redistributed and/or modified under
@@ -23,7 +23,7 @@ if [ ! "`id -u`" = "0" ]; then
 	error "This command must be run as root"
 fi
 
-PKGNAME={__APPNAME}
+PKGNAME=@PACKAGE_NAME@
 MACPKGNAME=com.$PKGNAME.$PKGNAME
 RCPT=/Library/Receipts/$PKGNAME.pkg
 
@@ -46,12 +46,23 @@ cd $PWD
 
 echo Removing directories ...
 rmdir /opt/$PKGNAME/bin 2>&1 || RETCODE=-1
+if [ -d /opt/$PKGNAME/bin ]; then
+	rmdir /opt/$PKGNAME/bin 2>&1 || RETCODE=-1
+fi
 if [ -d /opt/$PKGNAME/lib ]; then
 	rmdir /opt/$PKGNAME/lib 2>&1 || RETCODE=-1
 fi
 if [ -d /opt/$PKGNAME/include ]; then
 	rmdir /opt/$PKGNAME/include 2>&1 || RETCODE=-1
 fi
+rm /opt/$PKGNAME/lib32 2>&1 || RETCODE=-1
+rm /opt/$PKGNAME/lib64 2>&1 || RETCODE=-1
+if [ -d /opt/$PKGNAME/man/man1 ]; then
+	rmdir /opt/$PKGNAME/man/man1 2>&1 || RETCODE=-1
+fi
+if [ -d /opt/$PKGNAME/man ]; then
+	rmdir /opt/$PKGNAME/man 2>&1 || RETCODE=-1
+fi
 rmdir /opt/$PKGNAME 2>&1 || RETCODE=-1
 rmdir /Library/Documentation/$PKGNAME 2>&1 || RETCODE=-1
 

rrtimer.h

@@ -15,69 +15,6 @@
 #ifndef __RRTIMER_H__
 #define __RRTIMER_H__
 
-#ifdef __cplusplus
-
-#ifdef _WIN32
-#include <windows.h>
-#else
-#include <sys/time.h>
-#endif
-
-class rrtimer
-{
-	public:
-
-		rrtimer(void) : t1(0.0)
-		{
-			#ifdef _WIN32
-			highres=false;  tick=0.001;
-			LARGE_INTEGER Frequency;
-			if(QueryPerformanceFrequency(&Frequency)!=0)
-			{
-				tick=(double)1.0/(double)(Frequency.QuadPart);
-				highres=true;
-			}
-			#endif
-		}
-
-		void start(void)
-		{
-			t1=time();
-		}
-
-		double time(void)
-		{
-			#ifdef _WIN32
-			if(highres)
-			{
-				LARGE_INTEGER Time;
-				QueryPerformanceCounter(&Time);
-				return((double)(Time.QuadPart)*tick);
-			}
-			else
-				return((double)GetTickCount()*tick);
-			#else
-			struct timeval __tv;
-			gettimeofday(&__tv, (struct timezone *)NULL);
-			return((double)(__tv.tv_sec)+(double)(__tv.tv_usec)*0.000001);
-			#endif
-		}
-
-		double elapsed(void)
-		{
-			return time()-t1;
-		}
-
-	private:
-
-		#ifdef _WIN32
-		bool highres;  double tick;
-		#endif
-		double t1;
-};
-
-#endif  // __cplusplus
-
 #ifdef _WIN32
 
 #include <windows.h>
@@ -111,4 +48,3 @@ static __inline double rrtime(void)
 #endif
 
 #endif
-

rrutil.h

@@ -1,5 +1,6 @@
 /* Copyright (C)2004 Landmark Graphics Corporation
  * Copyright (C)2005 Sun Microsystems, Inc.
+ * Copyright (C)2010 D. R. Commander
  *
  * This library is free software and may be redistributed and/or modified under
  * the terms of the wxWindows Library License, Version 3.1 or (at your option)
@@ -49,7 +50,7 @@ static __inline int numprocs(void)
 	#ifdef _WIN32
 	DWORD_PTR ProcAff, SysAff, i;  int count=0;
 	if(!GetProcessAffinityMask(GetCurrentProcess(), &ProcAff, &SysAff)) return(1);
-	for(i=0; i<sizeof(long)*8; i++) if(ProcAff&(1<<i)) count++;
+	for(i=0; i<sizeof(long*)*8; i++) if(ProcAff&(1LL<<i)) count++;
 	return(count);
 	#elif defined (__APPLE__)
 	return(1);

sharedlib/CMakeLists.txt

@@ -0,0 +1,58 @@
+# Anything that must be linked against the shared C library on Windows must
+# be built in this subdirectory, because CMake doesn't allow us to override
+# the compiler flags for each build type except at directory scope.  Note
+# to CMake developers:  Add a COMPILE_FLAGS_<CONFIG> target property, or
+# better yet, provide a friendly way of configuring a Windows target to use the
+# static C library.
+
+if(MSVC)
+  # Build all configurations against shared C library
+  foreach(var CMAKE_C_FLAGS CMAKE_C_FLAGS_DEBUG CMAKE_C_FLAGS_RELEASE
+    CMAKE_C_FLAGS_MINSIZEREL CMAKE_C_FLAGS_RELWITHDEBINFO)
+    if(${var} MATCHES "/MT")
+      string(REGEX REPLACE "/MT" "/MD" ${var} "${${var}}")
+    endif()
+  endforeach()
+endif()
+
+foreach(src ${JPEG_SOURCES})
+  set(JPEG_SRCS ${JPEG_SRCS} ${CMAKE_SOURCE_DIR}/${src})
+endforeach()
+
+if(WITH_SIMD)
+  # This tells CMake that the "source" files haven't been generated yet
+  set_source_files_properties(${SIMD_OBJS} PROPERTIES GENERATED 1)
+endif()
+
+add_library(jpeg SHARED ${JPEG_SRCS} ${SIMD_OBJS}
+  ${CMAKE_SOURCE_DIR}/win/jpeg${DLL_VERSION}.def)
+set_target_properties(jpeg PROPERTIES SOVERSION ${DLL_VERSION}
+  VERSION ${FULLVERSION})
+if(MSVC)
+  set_target_properties(jpeg PROPERTIES SUFFIX ${DLL_VERSION}.dll)
+elseif(MINGW OR CYGWIN)
+  set_target_properties(jpeg PROPERTIES SUFFIX -${DLL_VERSION}.dll)
+endif(MSVC)
+if(WITH_SIMD)
+  add_dependencies(jpeg simd)
+endif()
+
+add_executable(cjpeg ../cjpeg.c ../cdjpeg.c ../rdbmp.c ../rdgif.c ../rdppm.c
+  ../rdswitch.c ../rdtarga.c)
+set_property(TARGET cjpeg PROPERTY COMPILE_FLAGS
+  "-DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED -DTARGA_SUPPORTED -DUSE_SETMODE")
+target_link_libraries(cjpeg jpeg)
+
+add_executable(djpeg ../djpeg.c ../cdjpeg.c ../rdcolmap.c ../rdswitch.c
+  ../wrbmp.c ../wrgif.c ../wrppm.c ../wrtarga.c)
+set_property(TARGET djpeg PROPERTY COMPILE_FLAGS
+  "-DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED -DTARGA_SUPPORTED -DUSE_SETMODE")
+target_link_libraries(djpeg jpeg)
+
+add_executable(jpegtran ../jpegtran.c ../cdjpeg.c ../rdswitch.c ../transupp.c)
+target_link_libraries(jpegtran jpeg)
+
+install(TARGETS jpeg cjpeg djpeg jpegtran
+  ARCHIVE DESTINATION lib
+  LIBRARY DESTINATION lib
+  RUNTIME DESTINATION bin)

simd/CMakeLists.txt

@@ -0,0 +1,58 @@
+if(NOT DEFINED NASM)
+  set(NASM nasm)
+endif()
+
+if(SIMD_X86_64)
+  set(NAFLAGS -fwin64 -DWIN64 -D__x86_64__ -I${CMAKE_SOURCE_DIR}/win/
+    -I${CMAKE_CURRENT_SOURCE_DIR}/)
+else()
+  set(NAFLAGS -fwin32 -DWIN32 -I${CMAKE_SOURCE_DIR}/win/
+    -I${CMAKE_CURRENT_SOURCE_DIR}/)
+endif()
+
+# This only works if building from the command line.  There is currently no way
+# to set a variable's value based on the build type when using the MSVC IDE.
+if(CMAKE_BUILD_TYPE STREQUAL "Debug"
+  OR CMAKE_BUILD_TYPE STREQUAL "RelWithDebInfo")
+  set(NAFLAGS ${NAFLAGS} -g)
+endif()
+
+if(SIMD_X86_64)
+  set(SIMD_BASENAMES jfsseflt-64 jccolss2-64 jdcolss2-64 jcsamss2-64
+    jdsamss2-64 jdmerss2-64 jcqnts2i-64 jfss2fst-64 jfss2int-64 jiss2red-64
+    jiss2int-64 jiss2fst-64 jcqnts2f-64 jiss2flt-64)
+  message(STATUS "Building x86_64 SIMD extensions")
+else()
+  set(SIMD_BASENAMES jsimdcpu jccolmmx jdcolmmx jcsammmx jdsammmx jdmermmx
+    jcqntmmx jfmmxfst jfmmxint jimmxred jimmxint jimmxfst jcqnt3dn jf3dnflt
+    ji3dnflt jcqntsse jfsseflt jisseflt jccolss2 jdcolss2 jcsamss2 jdsamss2
+    jdmerss2 jcqnts2i jfss2fst jfss2int jiss2red jiss2int jiss2fst jcqnts2f
+    jiss2flt)
+  message(STATUS "Building i386 SIMD extensions")
+endif()
+
+if(MSVC_IDE)
+  set(OBJDIR "${CMAKE_CURRENT_BINARY_DIR}/${CMAKE_CFG_INTDIR}")
+else()
+  set(OBJDIR ${CMAKE_CURRENT_BINARY_DIR})
+endif()
+
+foreach(file ${SIMD_BASENAMES})
+  set(DEPFILE "")
+  set(SIMD_SRC ${CMAKE_CURRENT_SOURCE_DIR}/${file}.asm)
+  if(${file} MATCHES col)
+    set(DEPFILE ${SIMD_SRC})
+    string(REGEX REPLACE "col" "clr" DEPFILE ${DEPFILE})
+  endif()
+  if(${file} MATCHES mer)
+    set(DEPFILE ${SIMD_SRC})
+    string(REGEX REPLACE "mer" "mrg" DEPFILE ${DEPFILE})
+  endif()
+  set(SIMD_OBJ ${OBJDIR}/${file}.obj)
+  add_custom_command(OUTPUT ${SIMD_OBJ} DEPENDS ${SIMD_SRC} ${DEPFILE} *.inc
+    COMMAND ${NASM} ${NAFLAGS} ${SIMD_SRC} -o${SIMD_OBJ})
+  set(SIMD_OBJS ${SIMD_OBJS} ${SIMD_OBJ})
+endforeach()
+
+set(SIMD_OBJS ${SIMD_OBJS} PARENT_SCOPE)
+add_custom_target(simd DEPENDS ${SIMD_OBJS})

simd/Makefile.am

@@ -4,7 +4,7 @@ BUILT_SOURCES = jsimdcfg.inc
 
 EXTRA_DIST = nasm_lt.sh jcclrmmx.asm jcclrss2.asm jdclrmmx.asm jdclrss2.asm \
 	jdmrgmmx.asm jdmrgss2.asm jcclrss2-64.asm jdclrss2-64.asm \
-	jdmrgss2-64.asm
+	jdmrgss2-64.asm CMakeLists.txt
 
 if SIMD_X86_64
 

simd/jcclrss2-64.asm

@@ -1,5 +1,5 @@
 ;
-; jcclrss2.asm - colorspace conversion (64-bit SSE2)
+; jcclrss2-64.asm - colorspace conversion (64-bit SSE2)
 ;
 ; x86 SIMD extension for IJG JPEG library
 ; Copyright (C) 1999-2006, MIYASAKA Masaru.
@@ -70,7 +70,7 @@ EXTN(jsimd_rgb_ycc_convert_sse2):
 	pop	rcx
 
 	mov rsi, r11
-	mov	rax, r14
+	mov	eax, r14d
 	test	rax,rax
 	jle	near .return
 .rowloop:

simd/jccolss2-64.asm

@@ -1,5 +1,5 @@
 ;
-; jccolss2.asm - colorspace conversion (64-bit SSE2)
+; jccolss2-64.asm - colorspace conversion (64-bit SSE2)
 ;
 ; x86 SIMD extension for IJG JPEG library
 ; Copyright (C) 1999-2006, MIYASAKA Masaru.

simd/jcqnts2f-64.asm

@@ -1,5 +1,5 @@
 ;
-; jcqnts2f.asm - sample data conversion and quantization (64-bit SSE & SSE2)
+; jcqnts2f-64.asm - sample data conversion and quantization (64-bit SSE & SSE2)
 ;
 ; Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
 ; Copyright 2009 D. R. Commander