Merge pull request #170 from StaticRocket/develop

platformio.ini: add m5stack-timer-cam
2025-04-20 21:09:24 +02:00 · 2025-04-20 02:12:52 -05:00 · 2025-01-05 13:02:44 +01:00 · 2025-01-05 12:38:21 +01:00 · 2024-12-29 13:27:29 +01:00 · 2024-08-24 11:32:26 +02:00
10 changed files with 235 additions and 62 deletions
--- a/README.md
+++ b/README.md
@@ -42,6 +42,8 @@ This software supports the following ESP32-CAM (and alike) modules:
 - M5STACK_V2_PSRAM
 - M5STACK_PSRAM
 - M5STACK_WIDE
+- M5STACK M5PoECAM-W
+- M5STACK Timer CAM (Original and X)
 - M5STACK
 - Seeed Studio XIAO ESP32S3 SENSE
 - TTGO T-CAMERA
@@ -310,22 +312,23 @@ The availability of PSRAM can be seen in the HTML status overview.

 Not all the boards are equipped with PSRAM:

-|  Board            | PSRAM           |
-|---                |---              |
-| WROVER_KIT        | 8Mb             |
-| ESP_EYE           | 8Mb             |
-| ESP32S3_EYE       | 8Mb             |
-| M5STACK_PSRAM     | 8Mb             |
-| M5STACK_V2_PSRAM  | Version B only  |
-| M5STACK_WIDE      | 8Mb             |
-| M5STACK_ESP32CAM  | No              |
-| M5STACK_UNITCAM   | No              |
-| M5STACK_UNITCAMS3 | 8Mb             |
-| AI_THINKER        | 8Mb             |
-| TTGO_T_JOURNAL    | No              |
-| ESP32_CAM_BOARD   | ?               |
-| ESP32S2_CAM_BOARD | ?               |
-| ESP32S3_CAM_LCD   | ?               |
+| Board              | PSRAM          |
+|--------------------|----------------|
+| WROVER_KIT         | 8Mb            |
+| ESP_EYE            | 8Mb            |
+| ESP32S3_EYE        | 8Mb            |
+| M5STACK_PSRAM      | 8Mb            |
+| M5STACK_V2_PSRAM   | Version B only |
+| M5STACK_WIDE       | 8Mb            |
+| M5STACK_ESP32CAM   | No             |
+| M5STACK_UNITCAM    | No             |
+| M5STACK_UNITCAMS3  | 8Mb            |
+| M5STACK_M5PoECAM-W | 8MB            |
+| AI_THINKER         | 8Mb            |
+| TTGO_T_JOURNAL     | No             |
+| ESP32_CAM_BOARD    | ?              |
+| ESP32S2_CAM_BOARD  | ?              |
+| ESP32S3_CAM_LCD    | ?              |

 Depending on the image resolution, framerate and quality, the PSRAM must be enabled and/or the number of frame buffers increased to keep up with the data generated by the sensor.
 There are (a lot of?) boards around with faulty PSRAM. If the camera fails to initialize, this might be a reason. See on [Reddit](https://www.reddit.com/r/esp32/comments/z2hyns/i_have_a_faulty_psram_on_my_esp32cam_what_should/).
@@ -357,6 +360,8 @@ esp32cam-rtsp depends on PlatformIO, Bootstrap 5 and Micro-RTSP by Kevin Hester.

 ## Change history

+- August 2024
+  - Added support for M5Stack M5PoECAM-W
 - January 2024
  - Moved settings to board definitions
  - Added new boards
--- a/assets/boards/m5stack_m5poecam-w_back.webp
+++ b/assets/boards/m5stack_m5poecam-w_back.webp
--- a/assets/boards/m5stack_m5poecam-w_front.webp
+++ b/assets/boards/m5stack_m5poecam-w_front.webp
--- a/boards/esp32cam_ai_thinker.json
+++ b/boards/esp32cam_ai_thinker.json
@@ -9,6 +9,7 @@
      "'-D ESP32CAM_AI_THINKER'",
      "'-D BOARD_HAS_PSRAM'",
      "'-mfix-esp32-psram-cache-issue'",
+      "'-D FLASH_LED_GPIO=4'",
      "'-D USER_LED_GPIO=33'",
      "'-D USER_LED_ON_LEVEL=LOW'",
      "'-D CAMERA_CONFIG_PIN_PWDN=32'",
--- a/boards/esp32cam_m5stack_m5poecam_w.json
+++ b/boards/esp32cam_m5stack_m5poecam_w.json
@@ -0,0 +1,68 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32_out.ld",
+      "partitions": "default_8MB.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "'-D ESP32CAM_M5STACK_M5POECAM'",
+      "'-D BOARD_HAS_PSRAM'",
+      "'-D USER_LED_GPIO=0'",
+      "'-D USER_LED_ON_LEVEL=LOW'",
+      "'-mfix-esp32-psram-cache-issue'",
+      "'-D CAMERA_CONFIG_PIN_PWDN=GPIO_NUM_NC'",
+      "'-D CAMERA_CONFIG_PIN_RESET=15'",
+      "'-D CAMERA_CONFIG_PIN_XCLK=27'",
+      "'-D CAMERA_CONFIG_PIN_SCCB_SDA=14'",
+      "'-D CAMERA_CONFIG_PIN_SCCB_SCL=12'",
+      "'-D CAMERA_CONFIG_PIN_Y9=19'",
+      "'-D CAMERA_CONFIG_PIN_Y8=36'",
+      "'-D CAMERA_CONFIG_PIN_Y7=18'",
+      "'-D CAMERA_CONFIG_PIN_Y6=39'",
+      "'-D CAMERA_CONFIG_PIN_Y5=5'",
+      "'-D CAMERA_CONFIG_PIN_Y4=34'",
+      "'-D CAMERA_CONFIG_PIN_Y3=35'",
+      "'-D CAMERA_CONFIG_PIN_Y2=32'",
+      "'-D CAMERA_CONFIG_PIN_VSYNC=22'",
+      "'-D CAMERA_CONFIG_PIN_HREF=26'",
+      "'-D CAMERA_CONFIG_PIN_PCLK=21'",
+      "'-D CAMERA_CONFIG_CLK_FREQ_HZ=20000000'",
+      "'-D CAMERA_CONFIG_LEDC_TIMER=LEDC_TIMER_0'",
+      "'-D CAMERA_CONFIG_LEDC_CHANNEL=LEDC_CHANNEL_0'",
+      "'-D CAMERA_CONFIG_FB_COUNT=2'",
+      "'-D CAMERA_CONFIG_FB_LOCATION=CAMERA_FB_IN_PSRAM'",
+      "'-D SCCB_I2C_PORT=I2C_NUM_0'",
+      "'-D GROVE_SDA=25'",
+      "'-D GROVE_SCL=33'"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "80000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "esp32"
+  },
+  "connectivity": [
+    "wifi",
+    "bluetooth",
+    "ethernet",
+    "can"
+  ],
+  "debug": {
+    "openocd_board": "esp-wroom-32.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "ESP32-CAM M5STACK M5PoECAM-W",
+  "upload": {
+    "flash_size": "16MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 16777216,
+    "require_upload_port": true,
+    "speed": 460800
+  },
+  "url": "https://docs.m5stack.com/en/unit/poecam-w",
+  "vendor": "M5STACK"
+}
--- a/boards/esp32cam_m5stack_unitcams3.json
+++ b/boards/esp32cam_m5stack_unitcams3.json
@@ -20,25 +20,25 @@
      "'-D CAMERA_CONFIG_PIN_XCLK=11'",
      "'-D CAMERA_CONFIG_PIN_SCCB_SDA=17'",
      "'-D CAMERA_CONFIG_PIN_SCCB_SCL=41'",
-      "'-D CAMERA_CONFIG_PIN_Y9=35'",
-      "'-D CAMERA_CONFIG_PIN_Y8=34'",
-      "'-D CAMERA_CONFIG_PIN_Y7=39'",
-      "'-D CAMERA_CONFIG_PIN_Y6=36'",
-      "'-D CAMERA_CONFIG_PIN_Y5=19'",
-      "'-D CAMERA_CONFIG_PIN_Y4=18'",
-      "'-D CAMERA_CONFIG_PIN_Y3=5'",
-      "'-D CAMERA_CONFIG_PIN_Y2=4'",
-      "'-D CAMERA_CONFIG_PIN_VSYNC=25'",
-      "'-D CAMERA_CONFIG_PIN_HREF=23'",
-      "'-D CAMERA_CONFIG_PIN_PCLK=22'",
+      "'-D CAMERA_CONFIG_PIN_Y9=13'",
+      "'-D CAMERA_CONFIG_PIN_Y8=4'",
+      "'-D CAMERA_CONFIG_PIN_Y7=10'",
+      "'-D CAMERA_CONFIG_PIN_Y6=5'",
+      "'-D CAMERA_CONFIG_PIN_Y5=7'",
+      "'-D CAMERA_CONFIG_PIN_Y4=16'",
+      "'-D CAMERA_CONFIG_PIN_Y3=15'",
+      "'-D CAMERA_CONFIG_PIN_Y2=6'",
+      "'-D CAMERA_CONFIG_PIN_VSYNC=42'",
+      "'-D CAMERA_CONFIG_PIN_HREF=18'",
+      "'-D CAMERA_CONFIG_PIN_PCLK=12'",
      "'-D CAMERA_CONFIG_CLK_FREQ_HZ=20000000'",
      "'-D CAMERA_CONFIG_LEDC_TIMER=LEDC_TIMER_0'",
      "'-D CAMERA_CONFIG_LEDC_CHANNEL=LEDC_CHANNEL_0'",
      "'-D CAMERA_CONFIG_FB_COUNT=2'",
      "'-D CAMERA_CONFIG_FB_LOCATION=CAMERA_FB_IN_DRAM'",
      "'-D SCCB_I2C_PORT=I2C_NUM_0'",
-      "'-D I2C_MEMS_SDA=48'",
-      "'-D I2C_MEMS_SCL=47'",
+      "'-D I2C_MEMS_SDA=17'",
+      "'-D I2C_MEMS_SCL=41'",
      "'-D TF_CS=9'",
      "'-D TF_MOSI=38'",
      "'-D TF_CLK=39'",
--- a/boards/m5stack-timer-cam.json
+++ b/boards/m5stack-timer-cam.json
@@ -0,0 +1,69 @@
+{
+  "build": {
+    "arduino":{
+      "ldscript": "esp32_out.ld",
+      "partitions": "huge_app.csv"
+    },
+    "core": "esp32",
+    "extra_flags": [
+      "'-D ARDUINO_M5Stack_Timer_CAM'",
+      "'-D BOARD_HAS_PSRAM'",
+      "'-mfix-esp32-psram-cache-issue'",
+      "'-mfix-esp32-psram-cache-strategy=memw'",
+      "'-D USER_LED_GPIO=2'",
+      "'-D USER_LED_ON_LEVEL=HIGH'",
+      "'-D CAMERA_CONFIG_PIN_PWDN=GPIO_NUM_NC'",
+      "'-D CAMERA_CONFIG_PIN_RESET=15'",
+      "'-D CAMERA_CONFIG_PIN_XCLK=27'",
+      "'-D CAMERA_CONFIG_PIN_SCCB_SDA=25'",
+      "'-D CAMERA_CONFIG_PIN_SCCB_SCL=23'",
+      "'-D CAMERA_CONFIG_PIN_Y9=19'",
+      "'-D CAMERA_CONFIG_PIN_Y8=36'",
+      "'-D CAMERA_CONFIG_PIN_Y7=18'",
+      "'-D CAMERA_CONFIG_PIN_Y6=39'",
+      "'-D CAMERA_CONFIG_PIN_Y5=5'",
+      "'-D CAMERA_CONFIG_PIN_Y4=34'",
+      "'-D CAMERA_CONFIG_PIN_Y3=35'",
+      "'-D CAMERA_CONFIG_PIN_Y2=32'",
+      "'-D CAMERA_CONFIG_PIN_VSYNC=22'",
+      "'-D CAMERA_CONFIG_PIN_HREF=26'",
+      "'-D CAMERA_CONFIG_PIN_PCLK=21'",
+      "'-D CAMERA_CONFIG_CLK_FREQ_HZ=20000000'",
+      "'-D CAMERA_CONFIG_LEDC_TIMER=LEDC_TIMER_0'",
+      "'-D CAMERA_CONFIG_LEDC_CHANNEL=LEDC_CHANNEL_0'",
+      "'-D CAMERA_CONFIG_FB_COUNT=2'",
+      "'-D CAMERA_CONFIG_FB_LOCATION=CAMERA_FB_IN_PSRAM'",
+      "'-D SCCB_I2C_PORT=I2C_NUM_0'",
+      "'-D GROVE_SDA=4'",
+      "'-D GROVE_SCL=13'"
+    ],
+    "f_cpu": "240000000L",
+    "f_flash": "40000000L",
+    "flash_mode": "dio",
+    "mcu": "esp32",
+    "variant": "m5stack_timer_cam"
+  },
+  "connectivity": [
+    "wifi",
+    "bluetooth",
+    "ethernet",
+    "can"
+  ],
+  "debug": {
+    "openocd_board": "esp-wroom-32.cfg"
+  },
+  "frameworks": [
+    "arduino",
+    "espidf"
+  ],
+  "name": "M5Stack Timer CAM",
+  "upload": {
+    "flash_size": "4MB",
+    "maximum_ram_size": 327680,
+    "maximum_size": 4194304,
+    "require_upload_port": true,
+    "speed": 115200
+  },
+  "url": "https://docs.m5stack.com/en/unit/timercam",
+  "vendor": "M5STACK"
+}
--- a/1
+++ b/1
--- a/platformio.ini
+++ b/platformio.ini
@@ -20,10 +20,10 @@
 #default_envs = esp32cam_m5stack_camera_psram
 #default_envs = esp32cam_m5stack_camera
 #default_envs = esp32cam_m5stack_esp32cam
-
 #default_envs = esp32cam_m5stack_unitcam
 #default_envs = esp32cam_m5stack_unitcams3
 #default_envs = esp32cam_m5stack_wide
+#default_envs = esp32cam_m5stack_m5poecam_w
 #default_envs = esp32cam_seeed_xiao_esp32s3_sense
 #default_envs = esp32cam_ttgo_t_camera
 #default_envs = esp32cam_ttgo_t_journal
@@ -101,6 +101,9 @@ board = esp32cam_m5stack_unitcams3
 [env:esp32cam_m5stack_wide]
 board = esp32cam_m5stack_wide

+[env:esp32cam_m5stack_m5poecam_w]
+board = esp32cam_m5stack_m5poecam_w
+
 [env:esp32cam_seeed_xiao_esp32s3_sense]
 board = esp32cam_seeed_xiao_esp32s3_sense

@@ -108,4 +111,7 @@ board = esp32cam_seeed_xiao_esp32s3_sense
 board = esp32cam_ttgo_t_camera

 [env:esp32cam_ttgo_t_journal]
-board = esp32cam_ttgo_t_journal
+board = esp32cam_ttgo_t_journal
+
+[env:m5stack-timer-cam]
+board = m5stack-timer-cam
--- a/src/main.cpp
+++ b/src/main.cpp
@@ -150,6 +150,20 @@ void handle_root()
  web_server.send(200, "text/html", html);
 }

+#ifdef FLASH_LED_GPIO
+void handle_flash()
+{
+  log_v("handle_flash");
+  // If no value present, use off, otherwise convert v to integer. Depends on analog resolution for max value
+  auto v = web_server.hasArg("v") ? web_server.arg("v").toInt() : 0;
+  // If conversion fails, v = 0
+  analogWrite(FLASH_LED_GPIO, v);
+
+  web_server.sendHeader("Cache-Control", "no-cache, no-store, must-revalidate");
+  web_server.send(200);
+}
+#endif
+
 void handle_snapshot()
 {
  log_v("handle_snapshot");
@@ -219,35 +233,35 @@ esp_err_t initialize_camera()
  auto jpeg_quality = param_jpg_quality.value();
  log_i("Frame duration: %d ms", param_frame_duration.value());
  const camera_config_t camera_config = {
-    .pin_pwdn = CAMERA_CONFIG_PIN_PWDN,         // GPIO pin for camera power down line
-    .pin_reset = CAMERA_CONFIG_PIN_RESET,       // GPIO pin for camera reset line
-    .pin_xclk = CAMERA_CONFIG_PIN_XCLK,         // GPIO pin for camera XCLK line
-    .pin_sccb_sda = CAMERA_CONFIG_PIN_SCCB_SDA, // GPIO pin for camera SDA line
-    .pin_sccb_scl = CAMERA_CONFIG_PIN_SCCB_SCL, // GPIO pin for camera SCL line
-    .pin_d7 = CAMERA_CONFIG_PIN_Y9,             // GPIO pin for camera D7 line
-    .pin_d6 = CAMERA_CONFIG_PIN_Y8,             // GPIO pin for camera D6 line
-    .pin_d5 = CAMERA_CONFIG_PIN_Y7,             // GPIO pin for camera D5 line
-    .pin_d4 = CAMERA_CONFIG_PIN_Y6,             // GPIO pin for camera D4 line
-    .pin_d3 = CAMERA_CONFIG_PIN_Y5,             // GPIO pin for camera D3 line
-    .pin_d2 = CAMERA_CONFIG_PIN_Y4,             // GPIO pin for camera D2 line
-    .pin_d1 = CAMERA_CONFIG_PIN_Y3,             // GPIO pin for camera D1 line
-    .pin_d0 = CAMERA_CONFIG_PIN_Y2,             // GPIO pin for camera D0 line
-    .pin_vsync = CAMERA_CONFIG_PIN_VSYNC,       // GPIO pin for camera VSYNC line
-    .pin_href = CAMERA_CONFIG_PIN_HREF,         // GPIO pin for camera HREF line
-    .pin_pclk = CAMERA_CONFIG_PIN_PCLK,         // GPIO pin for camera PCLK line
-    .xclk_freq_hz = CAMERA_CONFIG_CLK_FREQ_HZ,  // Frequency of XCLK signal, in Hz. EXPERIMENTAL: Set to 16MHz on ESP32-S2 or ESP32-S3 to enable EDMA mode
-    .ledc_timer = CAMERA_CONFIG_LEDC_TIMER,     // LEDC timer to be used for generating XCLK
-    .ledc_channel = CAMERA_CONFIG_LEDC_CHANNEL, // LEDC channel to be used for generating XCLK
-    .pixel_format = PIXFORMAT_JPEG,             // Format of the pixel data: PIXFORMAT_ + YUV422|GRAYSCALE|RGB565|JPEG
-    .frame_size = frame_size,                   // Size of the output image: FRAMESIZE_ + QVGA|CIF|VGA|SVGA|XGA|SXGA|UXGA
-    .jpeg_quality = jpeg_quality,               // Quality of JPEG output. 0-63 lower means higher quality
-    .fb_count = CAMERA_CONFIG_FB_COUNT,         // Number of frame buffers to be allocated. If more than one, then each frame will be acquired (double speed)
-    .fb_location = CAMERA_CONFIG_FB_LOCATION,   // The location where the frame buffer will be allocated
-    .grab_mode = CAMERA_GRAB_LATEST,            // When buffers should be filled
+      .pin_pwdn = CAMERA_CONFIG_PIN_PWDN,         // GPIO pin for camera power down line
+      .pin_reset = CAMERA_CONFIG_PIN_RESET,       // GPIO pin for camera reset line
+      .pin_xclk = CAMERA_CONFIG_PIN_XCLK,         // GPIO pin for camera XCLK line
+      .pin_sccb_sda = CAMERA_CONFIG_PIN_SCCB_SDA, // GPIO pin for camera SDA line
+      .pin_sccb_scl = CAMERA_CONFIG_PIN_SCCB_SCL, // GPIO pin for camera SCL line
+      .pin_d7 = CAMERA_CONFIG_PIN_Y9,             // GPIO pin for camera D7 line
+      .pin_d6 = CAMERA_CONFIG_PIN_Y8,             // GPIO pin for camera D6 line
+      .pin_d5 = CAMERA_CONFIG_PIN_Y7,             // GPIO pin for camera D5 line
+      .pin_d4 = CAMERA_CONFIG_PIN_Y6,             // GPIO pin for camera D4 line
+      .pin_d3 = CAMERA_CONFIG_PIN_Y5,             // GPIO pin for camera D3 line
+      .pin_d2 = CAMERA_CONFIG_PIN_Y4,             // GPIO pin for camera D2 line
+      .pin_d1 = CAMERA_CONFIG_PIN_Y3,             // GPIO pin for camera D1 line
+      .pin_d0 = CAMERA_CONFIG_PIN_Y2,             // GPIO pin for camera D0 line
+      .pin_vsync = CAMERA_CONFIG_PIN_VSYNC,       // GPIO pin for camera VSYNC line
+      .pin_href = CAMERA_CONFIG_PIN_HREF,         // GPIO pin for camera HREF line
+      .pin_pclk = CAMERA_CONFIG_PIN_PCLK,         // GPIO pin for camera PCLK line
+      .xclk_freq_hz = CAMERA_CONFIG_CLK_FREQ_HZ,  // Frequency of XCLK signal, in Hz. EXPERIMENTAL: Set to 16MHz on ESP32-S2 or ESP32-S3 to enable EDMA mode
+      .ledc_timer = CAMERA_CONFIG_LEDC_TIMER,     // LEDC timer to be used for generating XCLK
+      .ledc_channel = CAMERA_CONFIG_LEDC_CHANNEL, // LEDC channel to be used for generating XCLK
+      .pixel_format = PIXFORMAT_JPEG,             // Format of the pixel data: PIXFORMAT_ + YUV422|GRAYSCALE|RGB565|JPEG
+      .frame_size = frame_size,                   // Size of the output image: FRAMESIZE_ + QVGA|CIF|VGA|SVGA|XGA|SXGA|UXGA
+      .jpeg_quality = jpeg_quality,               // Quality of JPEG output. 0-63 lower means higher quality
+      .fb_count = CAMERA_CONFIG_FB_COUNT,         // Number of frame buffers to be allocated. If more than one, then each frame will be acquired (double speed)
+      .fb_location = CAMERA_CONFIG_FB_LOCATION,   // The location where the frame buffer will be allocated
+      .grab_mode = CAMERA_GRAB_LATEST,            // When buffers should be filled
 #if CONFIG_CAMERA_CONVERTER_ENABLED
-    conv_mode = CONV_DISABLE, // RGB<->YUV Conversion mode
+      conv_mode = CONV_DISABLE, // RGB<->YUV Conversion mode
 #endif
-    .sccb_i2c_port = SCCB_I2C_PORT // If pin_sccb_sda is -1, use the already configured I2C bus by number
+      .sccb_i2c_port = SCCB_I2C_PORT // If pin_sccb_sda is -1, use the already configured I2C bus by number
  };

  return cam.init(camera_config);
@@ -316,13 +330,21 @@ void setup()
  // Disable brownout
  WRITE_PERI_REG(RTC_CNTL_BROWN_OUT_REG, 0);

+  Serial.begin(115200);
+  Serial.setDebugOutput(true);
+
 #ifdef USER_LED_GPIO
  pinMode(USER_LED_GPIO, OUTPUT);
  digitalWrite(USER_LED_GPIO, !USER_LED_ON_LEVEL);
 #endif

-  Serial.begin(115200);
-  Serial.setDebugOutput(true);
+#ifdef FLASH_LED_GPIO
+  pinMode(FLASH_LED_GPIO, OUTPUT);
+  // Set resolution to 8 bits
+  analogWriteResolution(8);
+  // Turn flash led off
+  analogWrite(FLASH_LED_GPIO, 0);
+#endif

 #ifdef ARDUINO_USB_CDC_ON_BOOT
  // Delay for USB to connect/settle
@@ -397,7 +419,10 @@ void setup()
  web_server.on("/snapshot", HTTP_GET, handle_snapshot);
  // Camera stream
  web_server.on("/stream", HTTP_GET, handle_stream);
-
+#ifdef FLASH_LED_GPIO
+  // Flash led
+  web_server.on("/flash", HTTP_GET, handle_flash);
+#endif
  web_server.onNotFound([]()
                        { iotWebConf.handleNotFound(); });
 }
Author	SHA1	Message	Date
Rene	346deda2bb	Merge pull request #170 from StaticRocket/develop platformio.ini: add m5stack-timer-cam	2025-04-20 21:09:24 +02:00
Randolph Sapp	e466d592be	platformio.ini: add m5stack-timer-cam Add the m5stack-timer-cam definitions following information from the board documentation [1] and the board entry on platform.io [2]. Tweak the upload speed to use a known working value. Mention the X version in the readme as well since it uses the same board and is just a chassis change. [1] https://docs.m5stack.com/en/unit/timercam [2] `ec69109ed6/boards/m5stack-timer-cam.json` Signed-off-by: Randolph Sapp <rs@ti.com>	2025-04-20 02:12:52 -05:00
Rene	32cbc2479d	Merge pull request #158 from rzeldent:133-esp32-cam-led-flash-not-working 133-esp32-cam-led-flash-not-working	2025-01-05 13:02:44 +01:00
Rene Zeldenthuis	e93511d0c8	Added functions for flasg from API	2025-01-05 12:38:21 +01:00
Rene Zeldenthuis	8be1484386	Merge branch 'main' into develop	2024-12-29 13:27:29 +01:00
Dominik Rimpf	069e6ff2e7	Add support for M5PoECAM-W (#140 ) * add support for M5PoECAM-W (U121-B) * update documentation for newly added M5PoECAM-W * update board values for m5poecam-w	2024-08-24 11:32:26 +02:00
Rene Zeldenthuis	fe7195c232	Update with settings from Sheed	2024-03-19 13:49:06 +01:00
Rene Zeldenthuis	383d5803af	Merge branch 'main' into develop	2024-03-10 12:47:22 +01:00
Rene Zeldenthuis	c1d92bcb36	Merge branch 'main' into develop	2024-03-10 11:27:10 +01:00
Rene	c61e6cd882	Merge branch 'main' into develop	2024-03-10 11:10:09 +01:00
Rene Zeldenthuis	80a23aa5c4	Updated Markdown	2024-03-10 11:01:38 +01:00
Nick Volgas	e702191382	Fixing missing comma in xiao board json (#114 )	2024-02-23 19:42:09 +01:00
absentwallaby	613965e425	Added Freenove wroom-1 n8r8 board (#112 ) Co-authored-by: Nick Eales <nick.eales@outlook.com>	2024-02-22 00:12:54 +01:00
Rene Zeldenthuis	a760fdae38	Added sccb_i2c_port Retry 3 times camera init	2024-02-15 21:22:22 +01:00
Rene	1c2236466d	Merge branch 'main' into develop	2024-02-13 14:13:05 +01:00
Rene Zeldenthuis	9ba11162d8	Readded	2024-02-10 00:31:34 +01:00
Rene Zeldenthuis	fd21f32870	Merge branch 'develop' of https://github.com/rzeldent/esp32cam-rtsp into develop	2024-02-10 00:26:39 +01:00
Rene Zeldenthuis	4239de2286	Removed non required depencency	2024-02-10 00:26:37 +01:00
Rene Zeldenthuis	60b602b077	Removed non required depencency	2024-02-10 00:20:34 +01:00
Rene Zeldenthuis	7b4f4c056a	Typo	2024-02-07 02:09:06 +01:00
Rene Zeldenthuis	4df6c9469d	Added documentation pins for Mems/grove/led	2024-02-07 02:07:23 +01:00
Rene Zeldenthuis	50f4b6f94e	USER_LED_ON_LEVEL=LOW	2024-02-07 00:14:55 +01:00
Rene Zeldenthuis	f9336ad803	Corrected HTML for ipv4 fixed Sewrial issue esp32s2	2024-02-07 00:00:41 +01:00
Rene Zeldenthuis	8e5f4ee66c	UnitcamS3	2024-02-06 16:16:52 +01:00
Rene Zeldenthuis	138c620296	Added unitcams3	2024-02-05 01:19:04 +01:00
Rene Zeldenthuis	545a824b37	Removed OTA	2024-02-05 00:55:44 +01:00
Rene Zeldenthuis	e8cdf6d044	Work in progress	2024-02-04 23:23:59 +01:00
Rene Zeldenthuis	a90c4fe672	WIP	2024-02-04 20:22:09 +01:00
Rene Zeldenthuis	5bdfc45e3b	Work in progress	2024-02-04 17:11:21 +01:00
Rene	d0ef68bbf4	Added M5Stack UnitCamS3	2024-01-28 13:43:31 +01:00
Rene	51c5bf08bc	constexpr camera_config_t m5stack_camera_settings	2024-01-28 12:06:25 +01:00
Rene	7f37bff13d	- Default value for initResult if initialzation fails	2024-01-17 23:51:03 +01:00
Rene Zeldenthuis	351c6a29d5	Updated README.md	2023-12-19 00:01:14 +01:00
Rene Zeldenthuis	6850c2c47f	Merge branch 'feature/seeed_xiao_esp32s3' into develop	2023-12-18 23:47:57 +01:00
Rene Zeldenthuis	9ecdd1c05d	Added cache	2023-12-17 02:24:52 +01:00
Rene Zeldenthuis	0809f6baba	Updated platformio definitions	2023-12-17 02:21:27 +01:00
Rene	ed293ebb68	Update README.md	2023-10-17 16:14:02 +02:00
Rene Zeldenthuis	5b7d6f9da6	Renamed envirnment name to seeed_xiao_esp32s3	2023-10-07 21:59:41 +02:00
Rene Zeldenthuis	fdc0ddd379	Fixed typos	2023-09-21 09:21:08 +02:00
Rene Zeldenthuis	6917e44287	Updating build system	2023-09-18 23:35:53 +02:00
Rene Zeldenthuis	4360630835	Fixed typo	2023-08-17 01:58:47 +02:00
Rene Zeldenthuis	b3cb7d1bf7	Added seeed_xiao_esp32s3	2023-08-17 01:57:14 +02:00