mozjpeg

CMakeLists.txt

Add proper support for Borland compilers (Borland needs section names to be prefixed with an underscore, and it needs OMF object files.)

2014-06-22 21:14:39 +00:00

jccolext-altivec.c

Simplify the code somewhat. It actually wasn't necessary to have a "fast path" and a "medium path"-- they perform the same.

2015-01-10 12:09:11 +00:00

jccolext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolext-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jccolext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolor-altivec.c

Overhaul the AltiVec vector loading code in the compression-side colorspace conversion routines. The existing code was sometimes overreading the source buffer (at least according to valgrind), and it was necessary to increase the complexity of the code in order to prevent this without significantly compromising performance.

2015-01-10 11:32:36 +00:00

jccolor-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolor-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolor-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgray-altivec.c

Overhaul the AltiVec vector loading code in the compression-side colorspace conversion routines. The existing code was sometimes overreading the source buffer (at least according to valgrind), and it was necessary to increase the complexity of the code in order to prevent this without significantly compromising performance.

2015-01-10 11:32:36 +00:00

jcgray-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgray-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgray-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgryext-altivec.c

Simplify the code somewhat. It actually wasn't necessary to have a "fast path" and a "medium path"-- they perform the same.

2015-01-10 12:09:11 +00:00

jcgryext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgryext-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jcgryext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcolsamp.inc

Add SSE2 SIMD implementation of computationally intensive routines.

2009-03-09 13:34:17 +00:00

jcsample-altivec.c

AltiVec SIMD implementation of 2x1 and 2x2 downsampling

2015-01-08 06:18:33 +00:00

jcsample-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcsample-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcsample-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcsample.h

AltiVec SIMD implementation of 2x1 and 2x2 downsampling

2015-01-08 06:18:33 +00:00

jdcolext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolext-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolor-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolor-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolor-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdct.inc

Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)

2014-05-09 18:00:32 +00:00

jdmerge-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmerge-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmerge-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmrgext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmrgext-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmrgext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdsample-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdsample-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdsample-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctflt-3dn.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctflt-sse-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctflt-sse.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctfst-altivec.c

Use intrinsics for loading/storing data in the DCT/IDCT functions. This has no effect on the performance of the aligned loads/stores, but it makes it more obvious what that code is doing. Using intrinsics for the unaligned stores in the inverse DCT functions increases overall decompression performance by 1-2%.

2014-12-22 16:04:17 +00:00

jfdctfst-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctfst-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jfdctfst-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctint-altivec.c

Document the fact that the AltiVec implementation uses the same modified algorithms as the SSE2 implementation

2014-12-23 02:42:59 +00:00

jfdctint-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctint-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jfdctint-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-3dn.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-sse.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctfst-altivec.c

Document the fact that the AltiVec implementation uses the same modified algorithms as the SSE2 implementation

2014-12-23 02:42:59 +00:00

jidctfst-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctfst-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctfst-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctint-altivec.c

Document the fact that the AltiVec implementation uses the same modified algorithms as the SSE2 implementation

2014-12-23 02:42:59 +00:00

jidctint-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctint-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctint-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctred-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctred-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctred-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquant-3dn.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquant-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquant-sse.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquantf-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquantf-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquanti-altivec.c

AltiVec SIMD implementation of sample conversion and integer quantization

2014-12-23 04:14:54 +00:00

jquanti-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquanti-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jsimd_altivec.h

Split AltiVec algorithms into separate files for ease of maintenance; Rename constants using lowercase so they are not confused with macros

2014-12-22 01:00:42 +00:00

jsimd_arm64_neon.S

Modify the ARM64 assembly file so that it uses only syntax that the clang assembler in XCode 5.x can understand. These changes should all be cosmetic in nature-- they do not change the meaning or readability of the code nor the ability to build it for Linux. Actually, the code is now more in compliance with the ARM64 programming manual. In addition to these changes, there were a couple of instructions that clang simply doesn't support, so gas-preprocessor.pl was modified so that it now converts those into equivalent instructions that clang can handle.

2014-12-19 15:36:39 +00:00

jsimd_arm64.c

ARM64 NEON SIMD support for YCC-to-RGB565 conversion

2014-08-23 15:57:38 +00:00

jsimd_arm_neon.S

Reformat code per Siarhei's original patch (to clearly indicate that the offset instructions are completely independent) and add Siarhei as an individual author (he no longer works for Nokia.)

2014-08-25 15:26:09 +00:00

jsimd_arm.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd_i386.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd_mips_dspr2_asm.h

SIMD-accelerated floating point quantize and convsamp routines for MIPS DSPr2

2013-10-09 18:39:44 +00:00

jsimd_mips_dspr2.S

SIMD-accelerated int upsample routine for MIPS DSPr2

2014-05-18 20:04:47 +00:00

jsimd_mips.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd_powerpc.c

AltiVec SIMD implementation of 2x1 and 2x2 downsampling

2015-01-08 06:18:33 +00:00

jsimd_x86_64.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd.h

AltiVec SIMD implementation of 2x1 and 2x2 downsampling

2015-01-08 06:18:33 +00:00

jsimdcfg.inc.h

Remove MS-DOS code and information, and adjust copyright headers to reflect the removal of features in r1307 and r1308. libjpeg-turbo has never supported MS-DOS, nor is it even possible for us to do so.

2014-05-18 18:33:44 +00:00

jsimdcpu.asm

Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)

2014-05-09 18:00:32 +00:00

jsimdext.inc

Add proper support for Borland compilers (Borland needs section names to be prefixed with an underscore, and it needs OMF object files.)

2014-06-22 21:14:39 +00:00

Makefile.am

AltiVec SIMD implementation of 2x1 and 2x2 downsampling

2015-01-08 06:18:33 +00:00

nasm_lt.sh

First attempt at Win64 support

2010-02-18 13:03:41 +00:00