Kornel Lesiński 3554fdb9cf Merge branch 'libjpeg-turbo' ...

* libjpeg-turbo:
  Remove trailing spaces
  Another oops.  tjBufSizeYUV2() should return -1 if width < 1.
  Oops.  tjPlaneSizeYUV() should return -1 if componentID > 0 and subsamp==TJSAMP_GRAY.
  The AltiVec code actually works on 32-bit PowerPC platforms as well, so change the "powerpc64" token to "powerpc".  Also clean up the shift code, which wasn't building properly on OS X.
  AltiVec SIMD implementation of fast forward DCT
  Bump version to 1.5 alpha1 to prepare for new features
  When building libjpeg-turbo on Un*x systems, INT32 is usually typedef'ed to long, not int, so we need to specify an int pointer when doing a 4-byte write to the RGB565 output buffer.  On little endian systems, this doesn't matter, but when you write a 32-bit int to a 64-bit long pointer address on a big endian system, you are writing to the upper 4 bytes, not the lower 4 bytes.  NOTE: this will probably break on big endian systems that use 16-bit ints (are there any of those still around?)
  Fix Windows build
  Fix issues with RGB565 color conversion on big endian machines.  The RGB565 routines are now abstracted in a separate file, with separate little-endian and big-endian versions defined at compile time through the use of macros (this is similar to how the colorspace extension routines work.)  This allows big-endian machines to take advantage of the same performance optimizations as little-endian machines, and it retains the performance on little-endian machines, since the conditional branch for endianness is at a very coarse-grained level.
  Fix build on OS X PowerPC platforms
  Oops.  Forgot to alter the version header in the change log to indicate the release of 1.4 beta.

2014-11-08 16:36:45 +00:00

..

CMakeLists.txt

Merge libjpeg-turbo r1390

2014-09-07 18:21:19 +01:00

jccolext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolext-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jccolext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolor-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolor-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jccolor-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgray-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgray-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgray-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgryext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcgryext-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jcgryext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcolsamp.inc

Initial commit of libjpeg-turbo plus readme edits.

2014-01-13 18:28:20 -06:00

jcsample-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcsample-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jcsample-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolext-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolor-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolor-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdcolor-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdct.inc

Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)

2014-05-09 18:00:32 +00:00

jdmerge-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmerge-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmerge-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmrgext-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmrgext-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdmrgext-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdsample-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdsample-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jdsample-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctflt-3dn.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctflt-sse-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctflt-sse.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctfst-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctfst-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jfdctfst-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctint-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jfdctint-sse2-64.asm

Revert r1335 and r1336. It was a valiant effort, but on Windows, xmm8-xmm15 are non-volatile, and the overhead of pushing them onto the stack at the beginning of each function and popping them at the end was causing worse performance (in the neighborhood of 3-5%) than just using the work areas and limiting the register usage to xmm0-xmm7. Best to leave the SSE2 code alone. We can optimize the register usage for AVX2, once that port takes place.

2014-08-22 18:30:44 +00:00

jfdctint-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-3dn.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctflt-sse.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctfst-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctfst-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctfst-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctint-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctint-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctint-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctred-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctred-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jidctred-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquant-3dn.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquant-mmx.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquant-sse.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquantf-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquantf-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquanti-sse2-64.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jquanti-sse2.asm

Using subdirectories unfortunately opened up a can of worms. In order to prevent object name conflicts, it is necessary to use the subdir-objects automake directive, but it simply doesn't work right on some of the versions of automake we still have to support. Another option would be to add a separate Makefile.am file to each subdirectory, but that requires maintaining a completely different set of build rules for each one. Fortunately, however, we're in the 21st century now, so we can use filenames longer than 8.3.

2014-05-10 09:53:34 +00:00

jsimd_arm64_neon.S

Rename the ARM64 assembly file to match the C file

2014-08-29 01:53:17 +00:00

jsimd_arm64.c

ARM64 NEON SIMD support for YCC-to-RGB565 conversion

2014-08-23 15:57:38 +00:00

jsimd_arm_neon.S

Merge mozjpeg into libjpeg-turbo

2014-09-07 18:20:38 +01:00

jsimd_arm.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd_i386.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd_mips_dspr2_asm.h

Initial commit of libjpeg-turbo plus readme edits.

2014-01-13 18:28:20 -06:00

jsimd_mips_dspr2.S

SIMD-accelerated int upsample routine for MIPS DSPr2

2014-05-18 20:04:47 +00:00

jsimd_mips.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd_powerpc_altivec.c

The AltiVec code actually works on 32-bit PowerPC platforms as well, so change the "powerpc64" token to "powerpc". Also clean up the shift code, which wasn't building properly on OS X.

2014-09-05 07:23:12 +00:00

jsimd_powerpc.c

The AltiVec code actually works on 32-bit PowerPC platforms as well, so change the "powerpc64" token to "powerpc". Also clean up the shift code, which wasn't building properly on OS X.

2014-09-05 07:23:12 +00:00

jsimd_x86_64.c

ARM NEON SIMD support for YCC-to-RGB565 conversion, and optimizations to the existing YCC-to-RGB conversion code:

2014-08-23 15:47:51 +00:00

jsimd.h

AltiVec SIMD implementation of fast forward DCT

2014-09-05 06:33:42 +00:00

jsimdcfg.inc.h

Remove MS-DOS code and information, and adjust copyright headers to reflect the removal of features in r1307 and r1308. libjpeg-turbo has never supported MS-DOS, nor is it even possible for us to do so.

2014-05-18 18:33:44 +00:00

jsimdcpu.asm

Convert tabs to spaces in the libjpeg code and the SIMD code (TurboJPEG retains the use of tabs for historical reasons. They were annoying in the libjpeg code primarily because they were not consistently used and because they were used to format as well as indent the code. In the case of TurboJPEG, tabs are used just to indent the code, so even if the editor assumes a different tab width, the code will still be readable.)

2014-05-09 18:00:32 +00:00

jsimdext.inc

Add proper support for Borland compilers (Borland needs section names to be prefixed with an underscore, and it needs OMF object files.)

2014-06-22 21:14:39 +00:00

Makefile.am

Merge branch 'libjpeg-turbo'

2014-11-08 16:36:45 +00:00

nasm_lt.sh

configure.ac: enable silent build rules

2014-04-17 23:00:01 -05:00