The Independent JPEG Group's JPEG software v9c

Makefile.am

@@ -33,17 +33,17 @@ DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \
         structure.txt coderules.txt filelist.txt change.log
 
 # Makefiles for various systems
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 
 # Configuration files
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
@@ -55,7 +55,7 @@ CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
 
 # Miscellaneous support files
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 
 # Test support files
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
@@ -103,6 +103,10 @@ noinst_HEADERS = $(OTHERINCLUDES)
 EXTRA_DIST =  $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \
         $(OTHERFILES) $(TESTFILES)
 
+# pkg-config file
+pkgconfigdir = $(libdir)/pkgconfig
+nodist_pkgconfig_DATA = libjpeg.pc
+
 # Files to be cleaned
 CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \
         testoutt.jpg

Makefile.in

@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.13.1 from Makefile.am.
+# Makefile.in generated by automake 1.15.1 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+# Copyright (C) 1994-2017 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -22,24 +22,63 @@
 
 
 
+
 VPATH = @srcdir@
-am__make_dryrun = \
+am__is_gnu_make = { \
-  { \
+  if test -z '$(MAKELEVEL)'; then \
-    am__dry=no; \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
     case $$MAKEFLAGS in \
       *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+        bs=\\; \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
-      *) \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
     esac; \
-    test $$am__dry = yes; \
+  fi; \
-  }
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -63,19 +102,17 @@ target_triplet = @target@
 bin_PROGRAMS = cjpeg$(EXEEXT) djpeg$(EXEEXT) jpegtran$(EXEEXT) \
 	rdjpgcom$(EXEEXT) wrjpgcom$(EXEEXT)
 subdir = .
-DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
-	$(top_srcdir)/configure $(am__configure_deps) \
-	$(srcdir)/jconfig.cfg depcomp $(include_HEADERS) \
-	$(noinst_HEADERS)
 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
 	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
+	$(am__configure_deps) $(include_HEADERS) $(noinst_HEADERS)
 am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
  configure.lineno config.status.lineno
 mkinstalldirs = $(install_sh) -d
 CONFIG_HEADER = jconfig.h
-CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_FILES = libjpeg.pc
 CONFIG_CLEAN_VPATH_FILES =
 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 am__vpath_adj = case $$p in \
@@ -105,7 +142,8 @@ am__uninstall_files_from_dir = { \
          $(am__cd) "$$dir" && rm -f $$files; }; \
   }
 am__installdirs = "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" \
-	"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"
+	"$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" \
+	"$(DESTDIR)$(includedir)"
 LTLIBRARIES = $(lib_LTLIBRARIES)
 libjpeg_la_LIBADD =
 am__objects_1 = jaricom.lo jcapimin.lo jcapistd.lo jcarith.lo \
@@ -192,6 +230,7 @@ am__can_run_installinfo = \
 man1dir = $(mandir)/man1
 NROFF = nroff
 MANS = $(man_MANS)
+DATA = $(nodist_pkgconfig_DATA)
 HEADERS = $(include_HEADERS) $(noinst_HEADERS)
 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) \
 	$(LISP)jconfig.cfg
@@ -256,6 +295,7 @@ LIBTOOL = @LIBTOOL@
 LIPO = @LIPO@
 LN_S = @LN_S@
 LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
 MAINT = @MAINT@
 MAKEINFO = @MAKEINFO@
 MANIFEST_TOOL = @MANIFEST_TOOL@
@@ -369,17 +409,17 @@ DOCS = README install.txt usage.txt wizard.txt example.c libjpeg.txt \
 
 
 # Makefiles for various systems
-MKFILES = configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES = configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 
 
 # Configuration files
@@ -394,7 +434,7 @@ CONFIGUREFILES = config.guess config.sub install-sh ltmain.sh depcomp \
 
 
 # Miscellaneous support files
-OTHERFILES = jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES = jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 
 # Test support files
 TESTFILES = testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
@@ -439,6 +479,10 @@ EXTRA_DIST = $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \
         $(OTHERFILES) $(TESTFILES)
 
 
+# pkg-config file
+pkgconfigdir = $(libdir)/pkgconfig
+nodist_pkgconfig_DATA = libjpeg.pc
+
 # Files to be cleaned
 CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \
         testoutt.jpg
@@ -463,7 +507,6 @@ $(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__confi
 	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
 	$(am__cd) $(top_srcdir) && \
 	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 	@case '$?' in \
 	  *config.status*) \
@@ -484,8 +527,8 @@ $(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
 $(am__aclocal_m4_deps):
 
 jconfig.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
+	@test -f $@ || rm -f stamp-h1
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
+	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/jconfig.cfg $(top_builddir)/config.status
 	@rm -f stamp-h1
@@ -497,6 +540,8 @@ $(srcdir)/jconfig.cfg: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
 
 distclean-hdr:
 	-rm -f jconfig.h stamp-h1
+libjpeg.pc: $(top_builddir)/config.status $(srcdir)/libjpeg.pc.in
+	cd $(top_builddir) && $(SHELL) ./config.status $@
 
 install-libLTLIBRARIES: $(lib_LTLIBRARIES)
 	@$(NORMAL_INSTALL)
@@ -532,6 +577,7 @@ clean-libLTLIBRARIES:
 	  echo rm -f $${locs}; \
 	  rm -f $${locs}; \
 	}
+
 libjpeg.la: $(libjpeg_la_OBJECTS) $(libjpeg_la_DEPENDENCIES) $(EXTRA_libjpeg_la_DEPENDENCIES) 
 	$(AM_V_CCLD)$(libjpeg_la_LINK) -rpath $(libdir) $(libjpeg_la_OBJECTS) $(libjpeg_la_LIBADD) $(LIBS)
 install-binPROGRAMS: $(bin_PROGRAMS)
@@ -583,18 +629,23 @@ clean-binPROGRAMS:
 	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
 	echo " rm -f" $$list; \
 	rm -f $$list
+
 cjpeg$(EXEEXT): $(cjpeg_OBJECTS) $(cjpeg_DEPENDENCIES) $(EXTRA_cjpeg_DEPENDENCIES) 
 	@rm -f cjpeg$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(cjpeg_OBJECTS) $(cjpeg_LDADD) $(LIBS)
+
 djpeg$(EXEEXT): $(djpeg_OBJECTS) $(djpeg_DEPENDENCIES) $(EXTRA_djpeg_DEPENDENCIES) 
 	@rm -f djpeg$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(djpeg_OBJECTS) $(djpeg_LDADD) $(LIBS)
+
 jpegtran$(EXEEXT): $(jpegtran_OBJECTS) $(jpegtran_DEPENDENCIES) $(EXTRA_jpegtran_DEPENDENCIES) 
 	@rm -f jpegtran$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(jpegtran_OBJECTS) $(jpegtran_LDADD) $(LIBS)
+
 rdjpgcom$(EXEEXT): $(rdjpgcom_OBJECTS) $(rdjpgcom_DEPENDENCIES) $(EXTRA_rdjpgcom_DEPENDENCIES) 
 	@rm -f rdjpgcom$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(rdjpgcom_OBJECTS) $(rdjpgcom_LDADD) $(LIBS)
+
 wrjpgcom$(EXEEXT): $(wrjpgcom_OBJECTS) $(wrjpgcom_DEPENDENCIES) $(EXTRA_wrjpgcom_DEPENDENCIES) 
 	@rm -f wrjpgcom$(EXEEXT)
 	$(AM_V_CCLD)$(LINK) $(wrjpgcom_OBJECTS) $(wrjpgcom_LDADD) $(LIBS)
@@ -676,14 +727,14 @@ distclean-compile:
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c $<
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ $<
 
 .c.obj:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
 @am__fastdepCC_TRUE@	$(AM_V_at)$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	$(AM_V_CC)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
 @AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c `$(CYGPATH_W) '$<'`
+@am__fastdepCC_FALSE@	$(AM_V_CC@am__nodep@)$(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
 
 .c.lo:
 @am__fastdepCC_TRUE@	$(AM_V_CC)$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@@ -743,6 +794,27 @@ uninstall-man1:
 	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
 	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 	dir='$(DESTDIR)$(man1dir)'; $(am__uninstall_files_from_dir)
+install-nodist_pkgconfigDATA: $(nodist_pkgconfig_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nodist_pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
+	done
+
+uninstall-nodist_pkgconfigDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nodist_pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
 install-includeHEADERS: $(include_HEADERS)
 	@$(NORMAL_INSTALL)
 	@list='$(include_HEADERS)'; test -n "$(includedir)" || list=; \
@@ -826,12 +898,12 @@ distclean-tags:
 check-am: all-am
 	$(MAKE) $(AM_MAKEFLAGS) check-local
 check: check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(HEADERS) \
+all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(MANS) $(DATA) $(HEADERS) \
 		jconfig.h
 install-binPROGRAMS: install-libLTLIBRARIES
 
 installdirs:
-	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(includedir)"; do \
+	for dir in "$(DESTDIR)$(libdir)" "$(DESTDIR)$(bindir)" "$(DESTDIR)$(man1dir)" "$(DESTDIR)$(pkgconfigdir)" "$(DESTDIR)$(includedir)"; do \
 	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 	done
 install: install-am
@@ -889,7 +961,8 @@ info: info-am
 
 info-am:
 
-install-data-am: install-data-local install-includeHEADERS install-man
+install-data-am: install-data-local install-includeHEADERS install-man \
+	install-nodist_pkgconfigDATA
 
 install-dvi: install-dvi-am
 
@@ -938,7 +1011,8 @@ ps: ps-am
 ps-am:
 
 uninstall-am: uninstall-binPROGRAMS uninstall-includeHEADERS \
-	uninstall-libLTLIBRARIES uninstall-local uninstall-man
+	uninstall-libLTLIBRARIES uninstall-local uninstall-man \
+	uninstall-nodist_pkgconfigDATA
 
 uninstall-man: uninstall-man1
 
@@ -954,14 +1028,17 @@ uninstall-man: uninstall-man1
 	install-dvi-am install-exec install-exec-am install-html \
 	install-html-am install-includeHEADERS install-info \
 	install-info-am install-libLTLIBRARIES install-man \
-	install-man1 install-pdf install-pdf-am install-ps \
+	install-man1 install-nodist_pkgconfigDATA install-pdf \
-	install-ps-am install-strip installcheck installcheck-am \
+	install-pdf-am install-ps install-ps-am install-strip \
-	installdirs maintainer-clean maintainer-clean-generic \
+	installcheck installcheck-am installdirs maintainer-clean \
-	mostlyclean mostlyclean-compile mostlyclean-generic \
+	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
+	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall-am uninstall-binPROGRAMS uninstall-includeHEADERS \
+	tags tags-am uninstall uninstall-am uninstall-binPROGRAMS \
-	uninstall-libLTLIBRARIES uninstall-local uninstall-man \
+	uninstall-includeHEADERS uninstall-libLTLIBRARIES \
-	uninstall-man1
+	uninstall-local uninstall-man uninstall-man1 \
+	uninstall-nodist_pkgconfigDATA
+
+.PRECIOUS: Makefile
 
 
 # Install jconfig.h

README

@@ -1,8 +1,8 @@
 The Independent JPEG Group's JPEG software
 ==========================================
 
-README for release 9 of 13-Jan-2013
+README for release 9c of 14-Jan-2018
-===================================
+====================================
 
 This distribution contains the ninth public release of the Independent JPEG
 Group's free JPEG software.  You are welcome to redistribute this software and
@@ -14,7 +14,7 @@ Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers,
 and other members of the Independent JPEG Group.
 
 IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee
-(also known as JPEG, together with ITU-T SG16).
+(previously known as JPEG, together with ITU-T SG16).
 
 
 DOCUMENTATION ROADMAP
@@ -60,7 +60,7 @@ OVERVIEW
 
 This package contains C software to implement JPEG image encoding, decoding,
 and transcoding.  JPEG (pronounced "jay-peg") is a standardized compression
-method for full-color and gray-scale images.
+method for full-color and grayscale images.
 
 This software implements JPEG baseline, extended-sequential, and progressive
 compression processes.  Provision is made for supporting all variants of these
@@ -115,7 +115,7 @@ with respect to this software, its quality, accuracy, merchantability, or
 fitness for a particular purpose.  This software is provided "AS IS", and you,
 its user, assume the entire risk as to its quality and accuracy.
 
-This software is copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding.
+This software is copyright (C) 1991-2018, Thomas G. Lane, Guido Vollbeding.
 All Rights Reserved except as specified below.
 
 Permission is hereby granted to use, copy, modify, and distribute this
@@ -153,16 +153,11 @@ ltmain.sh).  Another support script, install-sh, is copyright by X Consortium
 but is also freely distributable.
 
 The IJG distribution formerly included code to read and write GIF files.
-To avoid entanglement with the Unisys LZW patent, GIF reading support has
+To avoid entanglement with the Unisys LZW patent (now expired), GIF reading
-been removed altogether, and the GIF writer has been simplified to produce
+support has been removed altogether, and the GIF writer has been simplified
-"uncompressed GIFs".  This technique does not use the LZW algorithm; the
+to produce "uncompressed GIFs".  This technique does not use the LZW
-resulting GIF files are larger than usual, but are readable by all standard
+algorithm; the resulting GIF files are larger than usual, but are readable
-GIF decoders.
+by all standard GIF decoders.
-
-We are required to state that
-    "The Graphics Interchange Format(c) is the Copyright property of
-    CompuServe Incorporated.  GIF(sm) is a Service Mark property of
-    CompuServe Incorporated."
 
 
 REFERENCES
@@ -176,8 +171,8 @@ The best short technical introduction to the JPEG compression algorithm is
 	Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
 (Adjacent articles in that issue discuss MPEG motion picture compression,
 applications of JPEG, and related topics.)  If you don't have the CACM issue
-handy, a PostScript file containing a revised version of Wallace's article is
+handy, a PDF file containing a revised version of Wallace's article is
-available at http://www.ijg.org/files/wallace.ps.gz.  The file (actually
+available at http://www.ijg.org/files/Wallace.JPEG.pdf.  The file (actually
 a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
 omits the sample images that appeared in CACM, but it includes corrections
 and some added material.  Note: the Wallace article is copyright ACM and IEEE,
@@ -225,14 +220,13 @@ WG1 N 6080 with title "JPEG 9 Lossless Coding", June/July 2012, Paris,
 France.
 
 The JPEG standard does not specify all details of an interchangeable file
-format.  For the omitted details we follow the "JFIF" conventions, revision
+format.  For the omitted details we follow the "JFIF" conventions, version 2.
-1.02.  JFIF 1.02 has been adopted as an Ecma International Technical Report
+JFIF version 1 has been adopted as Recommendation ITU-T T.871 (05/2011) :
-and thus received a formal publication status.  It is available as a free
+Information technology - Digital compression and coding of continuous-tone
-download in PDF format from
+still images: JPEG File Interchange Format (JFIF).  It is available as a
-http://www.ecma-international.org/publications/techreports/E-TR-098.htm.
+free download in PDF file format from http://www.itu.int/rec/T-REC-T.871.
-A PostScript version of the JFIF document is available at
+A PDF file of the older JFIF document is available at
-http://www.ijg.org/files/jfif.ps.gz.  There is also a plain text version at
+http://www.w3.org/Graphics/JPEG/jfif3.pdf.
-http://www.ijg.org/files/jfif.txt.gz, but it is missing the figures.
 
 The TIFF 6.0 file format specification can be obtained by FTP from
 ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
@@ -252,8 +246,8 @@ ARCHIVE LOCATIONS
 The "official" archive site for this software is www.ijg.org.
 The most recent released version can always be found there in
 directory "files".  This particular version will be archived as
-http://www.ijg.org/files/jpegsrc.v9.tar.gz, and in Windows-compatible
+http://www.ijg.org/files/jpegsrc.v9c.tar.gz, and in Windows-compatible
-"zip" archive format as http://www.ijg.org/files/jpegsr9.zip.
+"zip" archive format as http://www.ijg.org/files/jpegsr9c.zip.
 
 The JPEG FAQ (Frequently Asked Questions) article is a source of some
 general information about JPEG.
@@ -280,7 +274,7 @@ Thank to Thomas Wiegand and Gary Sullivan for inviting me to the
 Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland.
 
 Thank to Thomas Richter and Daniel Lee for inviting me to the
-ISO/IEC JTC1/SC29/WG1 (also known as JPEG, together with ITU-T SG16)
+ISO/IEC JTC1/SC29/WG1 (previously known as JPEG, together with ITU-T SG16)
 meeting in Berlin, Germany.
 
 Thank to John Korejwa and Massimo Ballerini for inviting me to
@@ -299,17 +293,20 @@ communication about JPEG configuration in Sigma Photo Pro software.
 
 Thank to Andrew Finkenstadt for hosting the ijg.org site.
 
-Last but not least special thank to Thomas G. Lane for the original
+Thank to Thomas G. Lane for the original design and development of
-design and development of this singular software package.
+this singular software package.
+
+Thank to Lars Goehler, Andreas Heinecke, Sebastian Fuss, Yvonne Roebert,
+Andrej Werner, and Ulf-Dietrich Braumann for support and public relations.
 
 
 FILE FORMAT WARS
 ================
 
-The ISO/IEC JTC1/SC29/WG1 standards committee (also known as JPEG, together
+The ISO/IEC JTC1/SC29/WG1 standards committee (previously known as JPEG,
-with ITU-T SG16) currently promotes different formats containing the name
+together with ITU-T SG16) currently promotes different formats containing
-"JPEG" which is misleading because these formats are incompatible with
+the name "JPEG" which is misleading because these formats are incompatible
-original DCT-based JPEG and are based on faulty technologies.
+with original DCT-based JPEG and are based on faulty technologies.
 IJG therefore does not and will not support such momentary mistakes
 (see REFERENCES).
 There exist also distributions under the name "OpenJPEG" promoting such
@@ -322,9 +319,13 @@ Don't use an incompatible file format!
 (In any case, our decoder will remain capable of reading existing JPEG
 image files indefinitely.)
 
-Furthermore, the ISO committee pretends to be "responsible for the popular
+The ISO committee pretends to be "responsible for the popular JPEG" in their
-JPEG" in their public reports which is not true because they don't respond to
+public reports which is not true because they don't respond to actual
-actual requirements for the maintenance of the original JPEG specification.
+requirements for the maintenance of the original JPEG specification.
+Furthermore, the ISO committee pretends to "ensure interoperability" with
+their standards which is not true because their "standards" support only
+application-specific and proprietary use cases and contain mathematically
+incorrect code.
 
 There are currently different distributions in circulation containing the
 name "libjpeg" which is misleading because they don't have the features and
@@ -332,19 +333,46 @@ are incompatible with formats supported by actual IJG libjpeg distributions.
 One of those fakes is released by members of the ISO committee and just uses
 the name of libjpeg for misdirection of people, similar to the abuse of the
 name JPEG as described above, while having nothing in common with actual IJG
-libjpeg distributions.
+libjpeg distributions and containing mathematically incorrect code.
-The other one claims to be a "derivative" or "fork" of the original libjpeg
+The other one claims to be a "derivative" or "fork" of the original libjpeg,
-and violates the license conditions as described under LEGAL ISSUES above.
+but violates the license conditions as described under LEGAL ISSUES above
-We have no sympathy for the release of misleading and illegal distributions
+and violates basic C programming properties.
-derived from obsolete code bases.
+We have no sympathy for the release of misleading, incorrect and illegal
+distributions derived from obsolete code bases.
 Don't use an obsolete code base!
 
+According to the UCC (Uniform Commercial Code) law, IJG has the lawful and
+legal right to foreclose on certain standardization bodies and other
+institutions or corporations that knowingly perform substantial and
+systematic deceptive acts and practices, fraud, theft, and damaging of the
+value of the people of this planet without their knowing, willing and
+intentional consent.
+The titles, ownership, and rights of these institutions and all their assets
+are now duly secured and held in trust for the free people of this planet.
+People of the planet, on every country, may have a financial interest in
+the assets of these former principals, agents, and beneficiaries of the
+foreclosed institutions and corporations.
+IJG asserts what is: that each man, woman, and child has unalienable value
+and rights granted and deposited in them by the Creator and not any one of
+the people is subordinate to any artificial principality, corporate fiction
+or the special interest of another without their appropriate knowing,
+willing and intentional consent made by contract or accommodation agreement.
+IJG expresses that which already was.
+The people have already determined and demanded that public administration
+entities, national governments, and their supporting judicial systems must
+be fully transparent, accountable, and liable.
+IJG has secured the value for all concerned free people of the planet.
+
+A partial list of foreclosed institutions and corporations ("Hall of Shame")
+is currently prepared and will be published later.
+
 
 TO DO
 =====
 
 Version 9 is the second release of a new generation JPEG standard
-to overcome the limitations of the original JPEG specification.
+to overcome the limitations of the original JPEG specification,
+and is the first true source reference JPEG codec.
 More features are being prepared for coming releases...
 
 Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org.

ar-lib

@@ -4,7 +4,7 @@
 me=ar-lib
 scriptversion=2012-03-01.08; # UTC
 
-# Copyright (C) 2010-2013 Free Software Foundation, Inc.
+# Copyright (C) 2010-2017 Free Software Foundation, Inc.
 # Written by Peter Rosin <peda@lysator.liu.se>.
 #
 # This program is free software; you can redistribute it and/or modify

cderror.h

@@ -2,7 +2,7 @@
  * cderror.h
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
+ * Modified 2009-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -41,16 +41,16 @@ JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */
 
 #ifdef BMP_SUPPORTED
 JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format")
-JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported")
+JMESSAGE(JERR_BMP_BADDEPTH, "Only 8-, 24-, and 32-bit BMP files are supported")
 JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
 JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
 JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
 JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
-JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image")
 JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
-JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
+JMESSAGE(JERR_BMP_OUTOFRANGE, "Numeric value out of range in BMP file")
+JMESSAGE(JTRC_BMP, "%ux%u %d-bit BMP image")
 JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
-JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image")
+JMESSAGE(JTRC_BMP_OS2, "%ux%u %d-bit OS2 BMP image")
 JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image")
 #endif /* BMP_SUPPORTED */
 
@@ -75,6 +75,7 @@ JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
 JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
 JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
 JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
+JMESSAGE(JERR_PPM_OUTOFRANGE, "Numeric value out of range in PPM file")
 JMESSAGE(JTRC_PGM, "%ux%u PGM image")
 JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
 JMESSAGE(JTRC_PPM, "%ux%u PPM image")

change.log

@@ -1,6 +1,77 @@
 CHANGE LOG for Independent JPEG Group's JPEG software
 
 
+Version 9c  14-Jan-2018
+-----------------------
+
+jpegtran: add an option to the -wipe switch to fill the region
+with the average of adjacent blocks, instead of gray out.
+Thank to Caitlyn Feddock and Maddie Ziegler for inspiration.
+
+Make range extension bits adjustable (in jpegint.h).
+Thank to Robin Watts for suggestion.
+
+Provide macros for fflush() and ferror() in jinclude.h in order
+to facilitate adaption by applications using an own FILE class.
+Thank to Gerhard Huber for suggestion.
+
+Add libjpeg pkg-config file.  Thank to Mark Lavi, Vincent Torri,
+Patrick McMunn, and Huw Davies for suggestion.
+
+Add sanity checks in cjpeg image reader modules.
+Thank to Bingchang, Liu for reports.
+
+
+Version 9b  17-Jan-2016
+-----------------------
+
+Improvements and optimizations in DCT and color calculations.
+Normalize range limit array composition and access pattern.
+Thank to Sia Furler and Maddie Ziegler for inspiration.
+
+Use merged upsample with scaled DCT sizes larger than 8.
+Thank to Taylor Hatala for inspiration.
+
+Check for excessive comment lengths in argument parsing in wrjpgcom.c.
+Thank to Julian Cohen for hint.
+
+Add makefile.b32 for use with Borland C++ 32-bit (bcc32).
+Thank to Joe Slater for contribution.
+
+Document 'f' specifier for jpegtran -crop specification.
+Thank to Michele Martone for suggestion.
+
+Use defined value from header instead of hardwired number in rdswitch.c.
+Thank to Robert Sprowson for hint.
+
+
+Version 9a  19-Jan-2014
+-----------------------
+
+Add support for wide gamut color spaces (JFIF version 2).
+Improve clarity and accuracy in color conversion modules.
+Note: Requires rebuild of test images.
+
+Extend the bit depth support to all values from 8 to 12
+(BITS_IN_JSAMPLE configuration option in jmorecfg.h).
+jpegtran now supports N bits sample data precision with all N from 8 to 12
+in a single instance.  Thank to Roland Fassauer for inspiration.
+
+Try to resolve issues with new boolean type definition.
+Thank also to v4hn for suggestion.
+
+Enable option to use default Huffman tables for lossless compression
+(for hardware solution), and in this case improve lossless RGB compression
+with reversible color transform.  Thank to Benny Alexandar for hint.
+
+Extend the entropy decoding structure, so that extraneous bytes between
+compressed scan data and following marker can be reported correctly.
+Thank to Nigel Tao for hint.
+
+Add jpegtran -wipe option and extension for -crop.
+Thank to Andrew Senior, David Clunie, and Josef Schmid for suggestion.
+
+
 Version 9  13-Jan-2013
 ----------------------
 

cjpeg.1

@@ -1,4 +1,4 @@
-.TH CJPEG 1 "4 May 2012"
+.TH CJPEG 1 "26 July 2015"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -16,7 +16,7 @@ cjpeg \- compress an image file to a JPEG file
 compresses the named image file, or the standard input if no file is
 named, and produces a JPEG/JFIF file on the standard output.
 The currently supported input file formats are: PPM (PBMPLUS color
-format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
+format), PGM (PBMPLUS grayscale format), BMP, Targa, and RLE (Utah Raster
 Toolkit format).  (RLE is supported only if the URT library is available.)
 .SH OPTIONS
 All switch names may be abbreviated; for example,
@@ -199,6 +199,26 @@ this feature.  Reversible color transform support is not yet
 widely implemented, so many decoders will be unable to view
 a reversible color transformed JPEG file at all.
 .TP
+.B \-bgycc
+Create big gamut YCC JPEG file.
+In this type of encoding the color difference components are quantized
+further by a factor of 2 compared to the normal Cb/Cr values, thus creating
+space to allow larger color values with higher saturation than the normal
+gamut limits to be encoded.  In order to compensate for the loss of color
+fidelity compared to a normal YCC encoded file, the color quantization
+tables can be adjusted accordingly.  For example,
+.B cjpeg \-bgycc \-quality
+80,90 will give similar results as
+.B cjpeg \-quality
+80.
+.B Caution:
+For correct decompression a decoder with big gamut YCC support (JFIF
+version 2) is required.  An old decoder may or may not display a big
+gamut YCC encoded JPEG file, depending on JFIF version check and
+corresponding warning/error configuration.  In case of a granted
+decompression the old decoder will display the image with half
+saturated colors.
+.TP
 .B \-dct int
 Use integer DCT method (default).
 .TP
@@ -355,7 +375,8 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
+GIF input files are no longer supported, to avoid the Unisys LZW patent
+(now expired).
 (Conversion of GIF files to JPEG is usually a bad idea anyway.)
 .PP
 Not all variants of BMP and Targa file formats are supported.

cjpeg.c

@@ -174,6 +174,7 @@ usage (void)
 #endif
 #if JPEG_LIB_VERSION_MAJOR >= 9
   fprintf(stderr, "  -rgb1          Create RGB JPEG file with reversible color transform\n");
+  fprintf(stderr, "  -bgycc         Create big gamut YCC JPEG file\n");
 #endif
 #ifdef DCT_ISLOW_SUPPORTED
   fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
@@ -323,6 +324,17 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 #endif
       jpeg_set_colorspace(cinfo, JCS_RGB);
 
+    } else if (keymatch(arg, "bgycc", 5)) {
+      /* Force a big gamut YCC JPEG file to be generated. */
+#if JPEG_LIB_VERSION_MAJOR >= 9 && \
+      (JPEG_LIB_VERSION_MAJOR > 9 || JPEG_LIB_VERSION_MINOR >= 1)
+      jpeg_set_colorspace(cinfo, JCS_BG_YCC);
+#else
+      fprintf(stderr, "%s: sorry, BG_YCC colorspace not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
     } else if (keymatch(arg, "maxmemory", 3)) {
       /* Maximum memory in Kb (or Mb with 'm'). */
       long lval;

compile

@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2016-01-11.22; # UTC
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:

config.guess

@@ -1,10 +1,8 @@
 #! /bin/sh
 # Attempt to guess a canonical system name.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   Copyright 1992-2017 Free Software Foundation, Inc.
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2012-12-29'
+timestamp='2017-05-27'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -26,12 +24,12 @@ timestamp='2012-12-29'
 # program.  This Exception is an additional permission under section 7
 # of the GNU General Public License, version 3 ("GPLv3").
 #
-# Originally written by Per Bothner. 
+# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
 #
 # You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
 #
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
 
 
 me=`echo "$0" | sed -e 's,.*/,,'`
@@ -52,9 +50,7 @@ version="\
 GNU config.guess ($timestamp)
 
 Originally written by Per Bothner.
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+Copyright 1992-2017 Free Software Foundation, Inc.
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
-2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -136,6 +132,27 @@ UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
 UNAME_SYSTEM=`(uname -s) 2>/dev/null`  || UNAME_SYSTEM=unknown
 UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
 
+case "${UNAME_SYSTEM}" in
+Linux|GNU|GNU/*)
+	# If the system lacks a compiler, then just pick glibc.
+	# We could probably try harder.
+	LIBC=gnu
+
+	eval $set_cc_for_build
+	cat <<-EOF > $dummy.c
+	#include <features.h>
+	#if defined(__UCLIBC__)
+	LIBC=uclibc
+	#elif defined(__dietlibc__)
+	LIBC=dietlibc
+	#else
+	LIBC=gnu
+	#endif
+	EOF
+	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
+	;;
+esac
+
 # Note: order is significant - the case branches are not exclusive.
 
 case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
@@ -151,19 +168,29 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	# Note: NetBSD doesn't particularly care about the vendor
 	# portion of the name.  We always set it to "unknown".
 	sysctl="sysctl -n hw.machine_arch"
-	UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \
+	UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
-	    /usr/sbin/$sysctl 2>/dev/null || echo unknown)`
+	    /sbin/$sysctl 2>/dev/null || \
+	    /usr/sbin/$sysctl 2>/dev/null || \
+	    echo unknown)`
 	case "${UNAME_MACHINE_ARCH}" in
 	    armeb) machine=armeb-unknown ;;
 	    arm*) machine=arm-unknown ;;
 	    sh3el) machine=shl-unknown ;;
 	    sh3eb) machine=sh-unknown ;;
 	    sh5el) machine=sh5le-unknown ;;
+	    earmv*)
+		arch=`echo ${UNAME_MACHINE_ARCH} | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
+		endian=`echo ${UNAME_MACHINE_ARCH} | sed -ne 's,^.*\(eb\)$,\1,p'`
+		machine=${arch}${endian}-unknown
+		;;
 	    *) machine=${UNAME_MACHINE_ARCH}-unknown ;;
 	esac
 	# The Operating System including object format, if it has switched
-	# to ELF recently, or will in the future.
+	# to ELF recently (or will in the future) and ABI.
 	case "${UNAME_MACHINE_ARCH}" in
+	    earm*)
+		os=netbsdelf
+		;;
 	    arm*|i386|m68k|ns32k|sh3*|sparc|vax)
 		eval $set_cc_for_build
 		if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
@@ -180,6 +207,13 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		os=netbsd
 		;;
 	esac
+	# Determine ABI tags.
+	case "${UNAME_MACHINE_ARCH}" in
+	    earm*)
+		expr='s/^earmv[0-9]/-eabi/;s/eb$//'
+		abi=`echo ${UNAME_MACHINE_ARCH} | sed -e "$expr"`
+		;;
+	esac
 	# The OS release
 	# Debian GNU/NetBSD machines have a different userland, and
 	# thus, need a distinct triplet. However, they do not need
@@ -190,13 +224,13 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 		release='-gnu'
 		;;
 	    *)
-		release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'`
+		release=`echo ${UNAME_RELEASE} | sed -e 's/[-_].*//' | cut -d. -f1,2`
 		;;
 	esac
 	# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
 	# contains redundant information, the shorter form:
 	# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
-	echo "${machine}-${os}${release}"
+	echo "${machine}-${os}${release}${abi}"
 	exit ;;
     *:Bitrig:*:*)
 	UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
@@ -206,6 +240,10 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
 	echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE}
 	exit ;;
+    *:LibertyBSD:*:*)
+	UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
+	echo ${UNAME_MACHINE_ARCH}-unknown-libertybsd${UNAME_RELEASE}
+	exit ;;
     *:ekkoBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE}
 	exit ;;
@@ -218,6 +256,9 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
     *:MirBSD:*:*)
 	echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE}
 	exit ;;
+    *:Sortix:*:*)
+	echo ${UNAME_MACHINE}-unknown-sortix
+	exit ;;
     alpha:OSF1:*:*)
 	case $UNAME_RELEASE in
 	*4.0)
@@ -234,42 +275,42 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^  The alpha \(.*\) processor.*$/\1/p' | head -n 1`
 	case "$ALPHA_CPU_TYPE" in
 	    "EV4 (21064)")
-		UNAME_MACHINE="alpha" ;;
+		UNAME_MACHINE=alpha ;;
 	    "EV4.5 (21064)")
-		UNAME_MACHINE="alpha" ;;
+		UNAME_MACHINE=alpha ;;
 	    "LCA4 (21066/21068)")
-		UNAME_MACHINE="alpha" ;;
+		UNAME_MACHINE=alpha ;;
 	    "EV5 (21164)")
-		UNAME_MACHINE="alphaev5" ;;
+		UNAME_MACHINE=alphaev5 ;;
 	    "EV5.6 (21164A)")
-		UNAME_MACHINE="alphaev56" ;;
+		UNAME_MACHINE=alphaev56 ;;
 	    "EV5.6 (21164PC)")
-		UNAME_MACHINE="alphapca56" ;;
+		UNAME_MACHINE=alphapca56 ;;
 	    "EV5.7 (21164PC)")
-		UNAME_MACHINE="alphapca57" ;;
+		UNAME_MACHINE=alphapca57 ;;
 	    "EV6 (21264)")
-		UNAME_MACHINE="alphaev6" ;;
+		UNAME_MACHINE=alphaev6 ;;
 	    "EV6.7 (21264A)")
-		UNAME_MACHINE="alphaev67" ;;
+		UNAME_MACHINE=alphaev67 ;;
 	    "EV6.8CB (21264C)")
-		UNAME_MACHINE="alphaev68" ;;
+		UNAME_MACHINE=alphaev68 ;;
 	    "EV6.8AL (21264B)")
-		UNAME_MACHINE="alphaev68" ;;
+		UNAME_MACHINE=alphaev68 ;;
 	    "EV6.8CX (21264D)")
-		UNAME_MACHINE="alphaev68" ;;
+		UNAME_MACHINE=alphaev68 ;;
 	    "EV6.9A (21264/EV69A)")
-		UNAME_MACHINE="alphaev69" ;;
+		UNAME_MACHINE=alphaev69 ;;
 	    "EV7 (21364)")
-		UNAME_MACHINE="alphaev7" ;;
+		UNAME_MACHINE=alphaev7 ;;
 	    "EV7.9 (21364A)")
-		UNAME_MACHINE="alphaev79" ;;
+		UNAME_MACHINE=alphaev79 ;;
 	esac
 	# A Pn.n version is a patched version.
 	# A Vn.n version is a released version.
 	# A Tn.n version is a released field test version.
 	# A Xn.n version is an unreleased experimental baselevel.
 	# 1.2 uses "1.2" for uname -r.
-	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
 	# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
 	exitcode=$?
 	trap '' 0
@@ -342,16 +383,16 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	exit ;;
     i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
 	eval $set_cc_for_build
-	SUN_ARCH="i386"
+	SUN_ARCH=i386
 	# If there is a compiler, see if it is configured for 64-bit objects.
 	# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
 	# This test works for both compilers.
-	if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
 	    if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
-		(CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+		(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
 		grep IS_64BIT_ARCH >/dev/null
 	    then
-		SUN_ARCH="x86_64"
+		SUN_ARCH=x86_64
 	    fi
 	fi
 	echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'`
@@ -376,7 +417,7 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in
 	exit ;;
     sun*:*:4.2BSD:*)
 	UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
-	test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3
+	test "x${UNAME_RELEASE}" = x && UNAME_RELEASE=3
 	case "`/bin/arch`" in
 	    sun3)
 		echo m68k-sun-sunos${UNAME_RELEASE}
@@ -562,8 +603,9 @@ EOF
 	else
 		IBM_ARCH=powerpc
 	fi
-	if [ -x /usr/bin/oslevel ] ; then
+	if [ -x /usr/bin/lslpp ] ; then
-		IBM_REV=`/usr/bin/oslevel`
+		IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc |
+			   awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
 	else
 		IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE}
 	fi
@@ -600,13 +642,13 @@ EOF
 		    sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
 		    sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
 		    case "${sc_cpu_version}" in
-		      523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0
+		      523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
-		      528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1
+		      528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
 		      532)                      # CPU_PA_RISC2_0
 			case "${sc_kernel_bits}" in
-			  32) HP_ARCH="hppa2.0n" ;;
+			  32) HP_ARCH=hppa2.0n ;;
-			  64) HP_ARCH="hppa2.0w" ;;
+			  64) HP_ARCH=hppa2.0w ;;
-			  '') HP_ARCH="hppa2.0" ;;   # HP-UX 10.20
+			  '') HP_ARCH=hppa2.0 ;;   # HP-UX 10.20
 			esac ;;
 		    esac
 		fi
@@ -645,11 +687,11 @@ EOF
 		    exit (0);
 		}
 EOF
-		    (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
+		    (CCOPTS="" $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy`
 		    test -z "$HP_ARCH" && HP_ARCH=hppa
 		fi ;;
 	esac
-	if [ ${HP_ARCH} = "hppa2.0w" ]
+	if [ ${HP_ARCH} = hppa2.0w ]
 	then
 	    eval $set_cc_for_build
 
@@ -662,12 +704,12 @@ EOF
 	    # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
 	    # => hppa64-hp-hpux11.23
 
-	    if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) |
+	    if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
 		grep -q __LP64__
 	    then
-		HP_ARCH="hppa2.0w"
+		HP_ARCH=hppa2.0w
 	    else
-		HP_ARCH="hppa64"
+		HP_ARCH=hppa64
 	    fi
 	fi
 	echo ${HP_ARCH}-hp-hpux${HPUX_REV}
@@ -772,14 +814,14 @@ EOF
 	echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/'
 	exit ;;
     F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
-	FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'`
+	FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
 	FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'`
 	echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     5000:UNIX_System_V:4.*:*)
-	FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'`
+	FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
-	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'`
+	FUJITSU_REL=`echo ${UNAME_RELEASE} | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
 	echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}"
 	exit ;;
     i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
@@ -795,10 +837,11 @@ EOF
 	UNAME_PROCESSOR=`/usr/bin/uname -p`
 	case ${UNAME_PROCESSOR} in
 	    amd64)
-		echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+		UNAME_PROCESSOR=x86_64 ;;
-	    *)
+	    i386)
-		echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;;
+		UNAME_PROCESSOR=i586 ;;
 	esac
+	echo ${UNAME_PROCESSOR}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`
 	exit ;;
     i*:CYGWIN*:*)
 	echo ${UNAME_MACHINE}-pc-cygwin
@@ -809,7 +852,7 @@ EOF
     *:MINGW*:*)
 	echo ${UNAME_MACHINE}-pc-mingw32
 	exit ;;
-    i*:MSYS*:*)
+    *:MSYS*:*)
 	echo ${UNAME_MACHINE}-pc-msys
 	exit ;;
     i*:windows32*:*)
@@ -857,21 +900,21 @@ EOF
 	exit ;;
     *:GNU:*:*)
 	# the GNU system
-	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
+	echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-${LIBC}`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'`
 	exit ;;
     *:GNU/*:*:*)
 	# other systems with GNU libc and userland
-	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu
+	echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-${LIBC}
 	exit ;;
     i*86:Minix:*:*)
 	echo ${UNAME_MACHINE}-pc-minix
 	exit ;;
     aarch64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     aarch64_be:Linux:*:*)
 	UNAME_MACHINE=aarch64_be
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     alpha:Linux:*:*)
 	case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in
@@ -884,59 +927,60 @@ EOF
 	  EV68*) UNAME_MACHINE=alphaev68 ;;
 	esac
 	objdump --private-headers /bin/sh | grep -q ld.so.1
-	if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi
+	if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
-	echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC}
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    arc:Linux:*:* | arceb:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     arm*:Linux:*:*)
 	eval $set_cc_for_build
 	if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
 	    | grep -q __ARM_EABI__
 	then
-	    echo ${UNAME_MACHINE}-unknown-linux-gnu
+	    echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	else
 	    if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
 		| grep -q __ARM_PCS_VFP
 	    then
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabi
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabi
 	    else
-		echo ${UNAME_MACHINE}-unknown-linux-gnueabihf
+		echo ${UNAME_MACHINE}-unknown-linux-${LIBC}eabihf
 	    fi
 	fi
 	exit ;;
     avr32*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     cris:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
 	exit ;;
     crisv32:Linux:*:*)
-	echo ${UNAME_MACHINE}-axis-linux-gnu
+	echo ${UNAME_MACHINE}-axis-linux-${LIBC}
+	exit ;;
+    e2k:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     frv:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     hexagon:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:Linux:*:*)
-	LIBC=gnu
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
-	eval $set_cc_for_build
-	sed 's/^	//' << EOF >$dummy.c
-	#ifdef __dietlibc__
-	LIBC=dietlibc
-	#endif
-EOF
-	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^LIBC'`
-	echo "${UNAME_MACHINE}-pc-linux-${LIBC}"
 	exit ;;
     ia64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    k1om:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m32r*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     m68*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     mips:Linux:*:* | mips64:Linux:*:*)
 	eval $set_cc_for_build
@@ -955,54 +999,69 @@ EOF
 	#endif
 EOF
 	eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep '^CPU'`
-	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; }
+	test x"${CPU}" != x && { echo "${CPU}-unknown-linux-${LIBC}"; exit; }
 	;;
-    or32:Linux:*:*)
+    mips64el:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
+	exit ;;
+    openrisc*:Linux:*:*)
+	echo or1k-unknown-linux-${LIBC}
+	exit ;;
+    or32:Linux:*:* | or1k*:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     padre:Linux:*:*)
-	echo sparc-unknown-linux-gnu
+	echo sparc-unknown-linux-${LIBC}
 	exit ;;
     parisc64:Linux:*:* | hppa64:Linux:*:*)
-	echo hppa64-unknown-linux-gnu
+	echo hppa64-unknown-linux-${LIBC}
 	exit ;;
     parisc:Linux:*:* | hppa:Linux:*:*)
 	# Look for CPU level
 	case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
-	  PA7*) echo hppa1.1-unknown-linux-gnu ;;
+	  PA7*) echo hppa1.1-unknown-linux-${LIBC} ;;
-	  PA8*) echo hppa2.0-unknown-linux-gnu ;;
+	  PA8*) echo hppa2.0-unknown-linux-${LIBC} ;;
-	  *)    echo hppa-unknown-linux-gnu ;;
+	  *)    echo hppa-unknown-linux-${LIBC} ;;
 	esac
 	exit ;;
     ppc64:Linux:*:*)
-	echo powerpc64-unknown-linux-gnu
+	echo powerpc64-unknown-linux-${LIBC}
 	exit ;;
     ppc:Linux:*:*)
-	echo powerpc-unknown-linux-gnu
+	echo powerpc-unknown-linux-${LIBC}
+	exit ;;
+    ppc64le:Linux:*:*)
+	echo powerpc64le-unknown-linux-${LIBC}
+	exit ;;
+    ppcle:Linux:*:*)
+	echo powerpcle-unknown-linux-${LIBC}
+	exit ;;
+    riscv32:Linux:*:* | riscv64:Linux:*:*)
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     s390:Linux:*:* | s390x:Linux:*:*)
-	echo ${UNAME_MACHINE}-ibm-linux
+	echo ${UNAME_MACHINE}-ibm-linux-${LIBC}
 	exit ;;
     sh64*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sh*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     sparc:Linux:*:* | sparc64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     tile*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     vax:Linux:*:*)
-	echo ${UNAME_MACHINE}-dec-linux-gnu
+	echo ${UNAME_MACHINE}-dec-linux-${LIBC}
 	exit ;;
     x86_64:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-pc-linux-${LIBC}
 	exit ;;
     xtensa*:Linux:*:*)
-	echo ${UNAME_MACHINE}-unknown-linux-gnu
+	echo ${UNAME_MACHINE}-unknown-linux-${LIBC}
 	exit ;;
     i*86:DYNIX/ptx:4*:*)
 	# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
@@ -1078,7 +1137,7 @@ EOF
 	# uname -m prints for DJGPP always 'pc', but it prints nothing about
 	# the processor, so we play safe by assuming i586.
 	# Note: whatever this is, it MUST be the same as what config.sub
-	# prints for the "djgpp" host, or else GDB configury will decide that
+	# prints for the "djgpp" host, or else GDB configure will decide that
 	# this is a cross-build.
 	echo i586-pc-msdosdjgpp
 	exit ;;
@@ -1227,6 +1286,9 @@ EOF
     SX-8R:SUPER-UX:*:*)
 	echo sx8r-nec-superux${UNAME_RELEASE}
 	exit ;;
+    SX-ACE:SUPER-UX:*:*)
+	echo sxace-nec-superux${UNAME_RELEASE}
+	exit ;;
     Power*:Rhapsody:*:*)
 	echo powerpc-apple-rhapsody${UNAME_RELEASE}
 	exit ;;
@@ -1235,24 +1297,43 @@ EOF
 	exit ;;
     *:Darwin:*:*)
 	UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown
-	case $UNAME_PROCESSOR in
+	eval $set_cc_for_build
-	    i386)
+	if test "$UNAME_PROCESSOR" = unknown ; then
-		eval $set_cc_for_build
+	    UNAME_PROCESSOR=powerpc
-		if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then
+	fi
-		  if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
+	if test `echo "$UNAME_RELEASE" | sed -e 's/\..*//'` -le 10 ; then
-		      (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \
+	    if [ "$CC_FOR_BUILD" != no_compiler_found ]; then
-		      grep IS_64BIT_ARCH >/dev/null
+		if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
-		  then
+		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
-		      UNAME_PROCESSOR="x86_64"
+		       grep IS_64BIT_ARCH >/dev/null
-		  fi
+		then
-		fi ;;
+		    case $UNAME_PROCESSOR in
-	    unknown) UNAME_PROCESSOR=powerpc ;;
+			i386) UNAME_PROCESSOR=x86_64 ;;
-	esac
+			powerpc) UNAME_PROCESSOR=powerpc64 ;;
+		    esac
+		fi
+		# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
+		if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
+		       (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
+		       grep IS_PPC >/dev/null
+		then
+		    UNAME_PROCESSOR=powerpc
+		fi
+	    fi
+	elif test "$UNAME_PROCESSOR" = i386 ; then
+	    # Avoid executing cc on OS X 10.9, as it ships with a stub
+	    # that puts up a graphical alert prompting to install
+	    # developer tools.  Any system running Mac OS X 10.7 or
+	    # later (Darwin 11 and later) is required to have a 64-bit
+	    # processor. This is not true of the ARM version of Darwin
+	    # that Apple uses in portable devices.
+	    UNAME_PROCESSOR=x86_64
+	fi
 	echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE}
 	exit ;;
     *:procnto*:*:* | *:QNX:[0123456789]*:*)
 	UNAME_PROCESSOR=`uname -p`
-	if test "$UNAME_PROCESSOR" = "x86"; then
+	if test "$UNAME_PROCESSOR" = x86; then
 		UNAME_PROCESSOR=i386
 		UNAME_MACHINE=pc
 	fi
@@ -1261,15 +1342,18 @@ EOF
     *:QNX:*:4*)
 	echo i386-pc-qnx
 	exit ;;
-    NEO-?:NONSTOP_KERNEL:*:*)
+    NEO-*:NONSTOP_KERNEL:*:*)
 	echo neo-tandem-nsk${UNAME_RELEASE}
 	exit ;;
     NSE-*:NONSTOP_KERNEL:*:*)
 	echo nse-tandem-nsk${UNAME_RELEASE}
 	exit ;;
-    NSR-?:NONSTOP_KERNEL:*:*)
+    NSR-*:NONSTOP_KERNEL:*:*)
 	echo nsr-tandem-nsk${UNAME_RELEASE}
 	exit ;;
+    NSX-*:NONSTOP_KERNEL:*:*)
+	echo nsx-tandem-nsk${UNAME_RELEASE}
+	exit ;;
     *:NonStop-UX:*:*)
 	echo mips-compaq-nonstopux
 	exit ;;
@@ -1283,7 +1367,7 @@ EOF
 	# "uname -m" is not consistent, so use $cputype instead. 386
 	# is converted to i386 for consistency with other x86
 	# operating systems.
-	if test "$cputype" = "386"; then
+	if test "$cputype" = 386; then
 	    UNAME_MACHINE=i386
 	else
 	    UNAME_MACHINE="$cputype"
@@ -1325,7 +1409,7 @@ EOF
 	echo i386-pc-xenix
 	exit ;;
     i*86:skyos:*:*)
-	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//'
+	echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE} | sed -e 's/ .*$//'`
 	exit ;;
     i*86:rdos:*:*)
 	echo ${UNAME_MACHINE}-pc-rdos
@@ -1336,171 +1420,25 @@ EOF
     x86_64:VMkernel:*:*)
 	echo ${UNAME_MACHINE}-unknown-esx
 	exit ;;
+    amd64:Isilon\ OneFS:*:*)
+	echo x86_64-unknown-onefs
+	exit ;;
 esac
 
-eval $set_cc_for_build
-cat >$dummy.c <<EOF
-#ifdef _SEQUENT_
-# include <sys/types.h>
-# include <sys/utsname.h>
-#endif
-main ()
-{
-#if defined (sony)
-#if defined (MIPSEB)
-  /* BFD wants "bsd" instead of "newsos".  Perhaps BFD should be changed,
-     I don't know....  */
-  printf ("mips-sony-bsd\n"); exit (0);
-#else
-#include <sys/param.h>
-  printf ("m68k-sony-newsos%s\n",
-#ifdef NEWSOS4
-	"4"
-#else
-	""
-#endif
-	); exit (0);
-#endif
-#endif
-
-#if defined (__arm) && defined (__acorn) && defined (__unix)
-  printf ("arm-acorn-riscix\n"); exit (0);
-#endif
-
-#if defined (hp300) && !defined (hpux)
-  printf ("m68k-hp-bsd\n"); exit (0);
-#endif
-
-#if defined (NeXT)
-#if !defined (__ARCHITECTURE__)
-#define __ARCHITECTURE__ "m68k"
-#endif
-  int version;
-  version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
-  if (version < 4)
-    printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
-  else
-    printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
-  exit (0);
-#endif
-
-#if defined (MULTIMAX) || defined (n16)
-#if defined (UMAXV)
-  printf ("ns32k-encore-sysv\n"); exit (0);
-#else
-#if defined (CMU)
-  printf ("ns32k-encore-mach\n"); exit (0);
-#else
-  printf ("ns32k-encore-bsd\n"); exit (0);
-#endif
-#endif
-#endif
-
-#if defined (__386BSD__)
-  printf ("i386-pc-bsd\n"); exit (0);
-#endif
-
-#if defined (sequent)
-#if defined (i386)
-  printf ("i386-sequent-dynix\n"); exit (0);
-#endif
-#if defined (ns32000)
-  printf ("ns32k-sequent-dynix\n"); exit (0);
-#endif
-#endif
-
-#if defined (_SEQUENT_)
-    struct utsname un;
-
-    uname(&un);
-
-    if (strncmp(un.version, "V2", 2) == 0) {
-	printf ("i386-sequent-ptx2\n"); exit (0);
-    }
-    if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
-	printf ("i386-sequent-ptx1\n"); exit (0);
-    }
-    printf ("i386-sequent-ptx\n"); exit (0);
-
-#endif
-
-#if defined (vax)
-# if !defined (ultrix)
-#  include <sys/param.h>
-#  if defined (BSD)
-#   if BSD == 43
-      printf ("vax-dec-bsd4.3\n"); exit (0);
-#   else
-#    if BSD == 199006
-      printf ("vax-dec-bsd4.3reno\n"); exit (0);
-#    else
-      printf ("vax-dec-bsd\n"); exit (0);
-#    endif
-#   endif
-#  else
-    printf ("vax-dec-bsd\n"); exit (0);
-#  endif
-# else
-    printf ("vax-dec-ultrix\n"); exit (0);
-# endif
-#endif
-
-#if defined (alliant) && defined (i860)
-  printf ("i860-alliant-bsd\n"); exit (0);
-#endif
-
-  exit (1);
-}
-EOF
-
-$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` &&
-	{ echo "$SYSTEM_NAME"; exit; }
-
-# Apollos put the system type in the environment.
-
-test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; }
-
-# Convex versions that predate uname can use getsysinfo(1)
-
-if [ -x /usr/convex/getsysinfo ]
-then
-    case `getsysinfo -f cpu_type` in
-    c1*)
-	echo c1-convex-bsd
-	exit ;;
-    c2*)
-	if getsysinfo -f scalar_acc
-	then echo c32-convex-bsd
-	else echo c2-convex-bsd
-	fi
-	exit ;;
-    c34*)
-	echo c34-convex-bsd
-	exit ;;
-    c38*)
-	echo c38-convex-bsd
-	exit ;;
-    c4*)
-	echo c4-convex-bsd
-	exit ;;
-    esac
-fi
-
 cat >&2 <<EOF
 $0: unable to guess system type
 
-This script, last modified $timestamp, has failed to recognize
+This script (version $timestamp), has failed to recognize the
-the operating system you are using. It is advised that you
+operating system you are using. If your script is old, overwrite
-download the most up to date version of the config scripts from
+config.guess and config.sub with the latest versions from:
 
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess
 and
-  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+  http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
 
-If the version you run ($0) is already up to date, please
+If $0 has already been updated, send the following data and any
-send the following data and any information you think might be
+information you think might be pertinent to config-patches@gnu.org to
-pertinent to <config-patches@gnu.org> in order to provide the needed
+provide the necessary information to handle your system.
-information to handle your system.
 
 config.guess timestamp = $timestamp
 

config.sub

@@ -1,10 +1,8 @@
 #! /bin/sh
 # Configuration validation subroutine script.
-#   Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
+#   Copyright 1992-2017 Free Software Foundation, Inc.
-#   2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010,
-#   2011, 2012, 2013 Free Software Foundation, Inc.
 
-timestamp='2012-12-29'
+timestamp='2017-04-02'
 
 # This file is free software; you can redistribute it and/or modify it
 # under the terms of the GNU General Public License as published by
@@ -27,7 +25,7 @@ timestamp='2012-12-29'
 # of the GNU General Public License, version 3 ("GPLv3").
 
 
-# Please send patches with a ChangeLog entry to config-patches@gnu.org.
+# Please send patches to <config-patches@gnu.org>.
 #
 # Configuration subroutine to validate and canonicalize a configuration type.
 # Supply the specified configuration type as an argument.
@@ -35,7 +33,7 @@ timestamp='2012-12-29'
 # Otherwise, we print the canonical config type on stdout and succeed.
 
 # You can get the latest version of this script from:
-# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD
+# http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub
 
 # This file is supposed to be the same for all GNU packages
 # and recognize all the CPU types, system types and aliases
@@ -55,8 +53,7 @@ timestamp='2012-12-29'
 me=`echo "$0" | sed -e 's,.*/,,'`
 
 usage="\
-Usage: $0 [OPTION] CPU-MFR-OPSYS
+Usage: $0 [OPTION] CPU-MFR-OPSYS or ALIAS
-       $0 [OPTION] ALIAS
 
 Canonicalize a configuration name.
 
@@ -70,9 +67,7 @@ Report bugs and patches to <config-patches@gnu.org>."
 version="\
 GNU config.sub ($timestamp)
 
-Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000,
+Copyright 1992-2017 Free Software Foundation, Inc.
-2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011,
-2012, 2013 Free Software Foundation, Inc.
 
 This is free software; see the source for copying conditions.  There is NO
 warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
@@ -121,8 +116,8 @@ maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'`
 case $maybe_os in
   nto-qnx* | linux-gnu* | linux-android* | linux-dietlibc | linux-newlib* | \
   linux-musl* | linux-uclibc* | uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | \
-  knetbsd*-gnu* | netbsd*-gnu* | \
+  knetbsd*-gnu* | netbsd*-gnu* | netbsd*-eabi* | \
-  kopensolaris*-gnu* | \
+  kopensolaris*-gnu* | cloudabi*-eabi* | \
   storm-chaos* | os2-emx* | rtmk-nova*)
     os=-$maybe_os
     basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'`
@@ -256,19 +251,21 @@ case $basic_machine in
 	| alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \
 	| alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \
 	| am33_2.0 \
-	| arc \
+	| arc | arceb \
 	| arm | arm[bl]e | arme[lb] | armv[2-8] | armv[3-8][lb] | armv7[arm] \
 	| avr | avr32 \
+	| ba \
 	| be32 | be64 \
 	| bfin \
-	| c4x | clipper \
+	| c4x | c8051 | clipper \
 	| d10v | d30v | dlx | dsp16xx \
-	| epiphany \
+	| e2k | epiphany \
-	| fido | fr30 | frv \
+	| fido | fr30 | frv | ft32 \
 	| h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \
 	| hexagon \
-	| i370 | i860 | i960 | ia64 \
+	| i370 | i860 | i960 | ia16 | ia64 \
 	| ip2k | iq2000 \
+	| k1om \
 	| le32 | le64 \
 	| lm32 \
 	| m32c | m32r | m32rle | m68000 | m68k | m88k \
@@ -286,26 +283,30 @@ case $basic_machine in
 	| mips64vr5900 | mips64vr5900el \
 	| mipsisa32 | mipsisa32el \
 	| mipsisa32r2 | mipsisa32r2el \
+	| mipsisa32r6 | mipsisa32r6el \
 	| mipsisa64 | mipsisa64el \
 	| mipsisa64r2 | mipsisa64r2el \
+	| mipsisa64r6 | mipsisa64r6el \
 	| mipsisa64sb1 | mipsisa64sb1el \
 	| mipsisa64sr71k | mipsisa64sr71kel \
+	| mipsr5900 | mipsr5900el \
 	| mipstx39 | mipstx39el \
 	| mn10200 | mn10300 \
 	| moxie \
 	| mt \
 	| msp430 \
 	| nds32 | nds32le | nds32be \
-	| nios | nios2 \
+	| nios | nios2 | nios2eb | nios2el \
 	| ns16k | ns32k \
-	| open8 \
+	| open8 | or1k | or1knd | or32 \
-	| or32 \
 	| pdp10 | pdp11 | pj | pjl \
 	| powerpc | powerpc64 | powerpc64le | powerpcle \
+	| pru \
 	| pyramid \
+	| riscv32 | riscv64 \
 	| rl78 | rx \
 	| score \
-	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
+	| sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[234]eb | sheb | shbe | shle | sh[1234]le | sh3ele \
 	| sh64 | sh64le \
 	| sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \
 	| sparcv8 | sparcv9 | sparcv9b | sparcv9v \
@@ -313,6 +314,8 @@ case $basic_machine in
 	| tahoe | tic4x | tic54x | tic55x | tic6x | tic80 | tron \
 	| ubicom32 \
 	| v850 | v850e | v850e1 | v850e2 | v850es | v850e2v3 \
+	| visium \
+	| wasm32 \
 	| we32k \
 	| x86 | xc16x | xstormy16 | xtensa \
 	| z8k | z80)
@@ -327,7 +330,10 @@ case $basic_machine in
 	c6x)
 		basic_machine=tic6x-unknown
 		;;
-	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | picochip)
+	leon|leon[3-9])
+		basic_machine=sparc-$basic_machine
+		;;
+	m6811 | m68hc11 | m6812 | m68hc12 | m68hcs12x | nvptx | picochip)
 		basic_machine=$basic_machine-unknown
 		os=-none
 		;;
@@ -369,21 +375,23 @@ case $basic_machine in
 	| aarch64-* | aarch64_be-* \
 	| alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \
 	| alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \
-	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* \
+	| alphapca5[67]-* | alpha64pca5[67]-* | arc-* | arceb-* \
 	| arm-*  | armbe-* | armle-* | armeb-* | armv*-* \
 	| avr-* | avr32-* \
+	| ba-* \
 	| be32-* | be64-* \
 	| bfin-* | bs2000-* \
 	| c[123]* | c30-* | [cjt]90-* | c4x-* \
-	| clipper-* | craynv-* | cydra-* \
+	| c8051-* | clipper-* | craynv-* | cydra-* \
 	| d10v-* | d30v-* | dlx-* \
-	| elxsi-* \
+	| e2k-* | elxsi-* \
 	| f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \
 	| h8300-* | h8500-* \
 	| hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \
 	| hexagon-* \
-	| i*86-* | i860-* | i960-* | ia64-* \
+	| i*86-* | i860-* | i960-* | ia16-* | ia64-* \
 	| ip2k-* | iq2000-* \
+	| k1om-* \
 	| le32-* | le64-* \
 	| lm32-* \
 	| m32c-* | m32r-* | m32rle-* \
@@ -403,28 +411,34 @@ case $basic_machine in
 	| mips64vr5900-* | mips64vr5900el-* \
 	| mipsisa32-* | mipsisa32el-* \
 	| mipsisa32r2-* | mipsisa32r2el-* \
+	| mipsisa32r6-* | mipsisa32r6el-* \
 	| mipsisa64-* | mipsisa64el-* \
 	| mipsisa64r2-* | mipsisa64r2el-* \
+	| mipsisa64r6-* | mipsisa64r6el-* \
 	| mipsisa64sb1-* | mipsisa64sb1el-* \
 	| mipsisa64sr71k-* | mipsisa64sr71kel-* \
+	| mipsr5900-* | mipsr5900el-* \
 	| mipstx39-* | mipstx39el-* \
 	| mmix-* \
 	| mt-* \
 	| msp430-* \
 	| nds32-* | nds32le-* | nds32be-* \
-	| nios-* | nios2-* \
+	| nios-* | nios2-* | nios2eb-* | nios2el-* \
 	| none-* | np1-* | ns16k-* | ns32k-* \
 	| open8-* \
+	| or1k*-* \
 	| orion-* \
 	| pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \
 	| powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* \
+	| pru-* \
 	| pyramid-* \
+	| riscv32-* | riscv64-* \
 	| rl78-* | romp-* | rs6000-* | rx-* \
 	| sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \
 	| shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \
 	| sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \
 	| sparclite-* \
-	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx?-* \
+	| sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | sv1-* | sx*-* \
 	| tahoe-* \
 	| tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \
 	| tile*-* \
@@ -432,6 +446,8 @@ case $basic_machine in
 	| ubicom32-* \
 	| v850-* | v850e-* | v850e1-* | v850es-* | v850e2-* | v850e2v3-* \
 	| vax-* \
+	| visium-* \
+	| wasm32-* \
 	| we32k-* \
 	| x86-* | x86_64-* | xc16x-* | xps100-* \
 	| xstormy16-* | xtensa*-* \
@@ -508,6 +524,9 @@ case $basic_machine in
 		basic_machine=i386-pc
 		os=-aros
 		;;
+	asmjs)
+		basic_machine=asmjs-unknown
+		;;
 	aux)
 		basic_machine=m68k-apple
 		os=-aux
@@ -628,6 +647,14 @@ case $basic_machine in
 		basic_machine=m68k-bull
 		os=-sysv3
 		;;
+	e500v[12])
+		basic_machine=powerpc-unknown
+		os=$os"spe"
+		;;
+	e500v[12]-*)
+		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
+		os=$os"spe"
+		;;
 	ebmon29k)
 		basic_machine=a29k-amd
 		os=-ebmon
@@ -769,6 +796,9 @@ case $basic_machine in
 		basic_machine=m68k-isi
 		os=-sysv
 		;;
+	leon-*|leon[3-9]-*)
+		basic_machine=sparc-`echo $basic_machine | sed 's/-.*//'`
+		;;
 	m68knommu)
 		basic_machine=m68k-unknown
 		os=-linux
@@ -796,7 +826,7 @@ case $basic_machine in
 		os=-mingw64
 		;;
 	mingw32)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-mingw32
 		;;
 	mingw32ce)
@@ -824,6 +854,10 @@ case $basic_machine in
 		basic_machine=powerpc-unknown
 		os=-morphos
 		;;
+	moxiebox)
+		basic_machine=moxie-unknown
+		os=-moxiebox
+		;;
 	msdos)
 		basic_machine=i386-pc
 		os=-msdos
@@ -832,7 +866,7 @@ case $basic_machine in
 		basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'`
 		;;
 	msys)
-		basic_machine=i386-pc
+		basic_machine=i686-pc
 		os=-msys
 		;;
 	mvs)
@@ -916,6 +950,9 @@ case $basic_machine in
 	nsr-tandem)
 		basic_machine=nsr-tandem
 		;;
+	nsx-tandem)
+		basic_machine=nsx-tandem
+		;;
 	op50n-* | op60c-*)
 		basic_machine=hppa1.1-oki
 		os=-proelf
@@ -1000,7 +1037,7 @@ case $basic_machine in
 	ppc-* | ppcbe-*)
 		basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	ppcle | powerpclittle | ppc-le | powerpc-little)
+	ppcle | powerpclittle)
 		basic_machine=powerpcle-unknown
 		;;
 	ppcle-* | powerpclittle-*)
@@ -1010,7 +1047,7 @@ case $basic_machine in
 		;;
 	ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'`
 		;;
-	ppc64le | powerpc64little | ppc64-le | powerpc64-little)
+	ppc64le | powerpc64little)
 		basic_machine=powerpc64le-unknown
 		;;
 	ppc64le-* | powerpc64little-*)
@@ -1211,6 +1248,9 @@ case $basic_machine in
 		basic_machine=a29k-wrs
 		os=-vxworks
 		;;
+	wasm32)
+		basic_machine=wasm32-unknown
+		;;
 	w65*)
 		basic_machine=w65-wdc
 		os=-none
@@ -1354,29 +1394,30 @@ case $os in
 	-gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \
 	      | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\
 	      | -hpux* | -unos* | -osf* | -luna* | -dgux* | -auroraux* | -solaris* \
-	      | -sym* | -kopensolaris* \
+	      | -sym* | -kopensolaris* | -plan9* \
 	      | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \
-	      | -aos* | -aros* \
+	      | -aos* | -aros* | -cloudabi* | -sortix* \
 	      | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \
 	      | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \
 	      | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \
-	      | -bitrig* | -openbsd* | -solidbsd* \
+	      | -bitrig* | -openbsd* | -solidbsd* | -libertybsd* \
 	      | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \
 	      | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \
 	      | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \
 	      | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \
-	      | -chorusos* | -chorusrdb* | -cegcc* \
+	      | -chorusos* | -chorusrdb* | -cegcc* | -glidix* \
 	      | -cygwin* | -msys* | -pe* | -psos* | -moss* | -proelf* | -rtems* \
-	      | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
+	      | -midipix* | -mingw32* | -mingw64* | -linux-gnu* | -linux-android* \
 	      | -linux-newlib* | -linux-musl* | -linux-uclibc* \
-	      | -uxpv* | -beos* | -mpeix* | -udk* \
+	      | -uxpv* | -beos* | -mpeix* | -udk* | -moxiebox* \
 	      | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \
 	      | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \
 	      | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \
 	      | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \
 	      | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \
 	      | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \
-	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es*)
+	      | -skyos* | -haiku* | -rdos* | -toppers* | -drops* | -es* \
+	      | -onefs* | -tirtos* | -phoenix* | -fuchsia* | -redox*)
 	# Remember, each alternative MUST END IN *, to match a version number.
 		;;
 	-qnx*)
@@ -1500,9 +1541,6 @@ case $os in
 	-aros*)
 		os=-aros
 		;;
-	-kaos*)
-		os=-kaos
-		;;
 	-zvmoe)
 		os=-zvmoe
 		;;
@@ -1511,6 +1549,8 @@ case $os in
 		;;
 	-nacl*)
 		;;
+	-ios)
+		;;
 	-none)
 		;;
 	*)
@@ -1551,6 +1591,9 @@ case $basic_machine in
 	c4x-* | tic4x-*)
 		os=-coff
 		;;
+	c8051-*)
+		os=-elf
+		;;
 	hexagon-*)
 		os=-elf
 		;;
@@ -1603,6 +1646,9 @@ case $basic_machine in
 	sparc-* | *-sun)
 		os=-sunos4.1.1
 		;;
+	pru-*)
+		os=-elf
+		;;
 	*-be)
 		os=-beos
 		;;

configure.ac

@@ -5,7 +5,7 @@
 # Configure script for IJG libjpeg
 #
 
-AC_INIT([libjpeg], [9.0.0])
+AC_INIT([libjpeg], [9.3.0])
 
 # Directory where autotools helper scripts lives.
 AC_CONFIG_AUX_DIR([.])
@@ -361,5 +361,5 @@ AC_SUBST([JPEG_LIB_VERSION],
          [`expr $major + $minor`:0:$minor])
 AC_MSG_RESULT([$JPEG_LIB_VERSION])
 
-AC_CONFIG_FILES([Makefile])
+AC_CONFIG_FILES([Makefile libjpeg.pc])
 AC_OUTPUT

depcomp

@@ -1,9 +1,9 @@
 #! /bin/sh
 # depcomp - compile a program generating dependencies as side-effects
 
-scriptversion=2012-10-18.11; # UTC
+scriptversion=2016-01-11.22; # UTC
 
-# Copyright (C) 1999-2013 Free Software Foundation, Inc.
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
 
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -552,6 +552,7 @@ $ {
   G
   p
 }' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
   rm -f "$tmpdepfile"
   ;;
 
@@ -785,6 +786,6 @@ exit 0
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

djpeg.1

@@ -1,4 +1,4 @@
-.TH DJPEG 1 "3 October 2009"
+.TH DJPEG 1 "26 July 2015"
 .SH NAME
 djpeg \- decompress a JPEG file to an image file
 .SH SYNOPSIS
@@ -55,11 +55,16 @@ default options are chosen for highest quality output.)  Currently, this is
 equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR.
 .TP
 .B \-grayscale
-Force gray-scale output even if JPEG file is color.  Useful for viewing on
+Force grayscale output even if JPEG file is color.
-monochrome displays; also,
+Useful for viewing on monochrome displays; also,
 .B djpeg
 runs noticeably faster in this mode.
 .TP
+.B \-rgb
+Force RGB output even if JPEG file is grayscale.
+This is provided to support applications that don't
+want to cope with grayscale as a separate case.
+.TP
 .BI \-scale " M/N"
 Scale the output image by a factor M/N.  Currently supported scale factors are
 M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for
@@ -76,7 +81,7 @@ emitted if
 .B \-colors
 or
 .B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
+is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
 format is emitted.
 .TP
 .B \-gif
@@ -90,12 +95,12 @@ emitted if
 .B \-colors
 or
 .B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
+is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
 format is emitted.
 .TP
 .B \-pnm
 Select PBMPLUS (PPM/PGM) output format (this is the default format).
-PGM is emitted if the JPEG file is gray-scale or if
+PGM is emitted if the JPEG file is grayscale or if
 .B \-grayscale
 is specified; otherwise PPM is emitted.
 .TP
@@ -103,8 +108,8 @@ is specified; otherwise PPM is emitted.
 Select RLE output format.  (Requires URT library.)
 .TP
 .B \-targa
-Select Targa output format.  Gray-scale format is emitted if the JPEG file is
+Select Targa output format.  Grayscale format is emitted if the JPEG file is
-gray-scale or if
+grayscale or if
 .B \-grayscale
 is specified; otherwise, colormapped format is emitted if
 .B \-colors
@@ -162,7 +167,7 @@ faster and needs less memory, but it produces a lower-quality image.
 is ignored unless you also say
 .B \-colors
 .IR N .
-Also, the one-pass method is always used for gray-scale output (the two-pass
+Also, the one-pass method is always used for grayscale output (the two-pass
 method is no improvement then).
 .TP
 .BI \-maxmemory " N"
@@ -246,7 +251,7 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-To avoid the Unisys LZW patent,
+To avoid the Unisys LZW patent (now expired),
 .B djpeg
 produces uncompressed GIF files.  These are larger than they should be, but
 are readable by standard GIF decoders.

djpeg.c

@@ -2,7 +2,7 @@
  * djpeg.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2009-2013 by Guido Vollbeding.
+ * Modified 2009-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -102,6 +102,7 @@ usage (void)
   fprintf(stderr, "  -colors N      Reduce image to no more than N colors\n");
   fprintf(stderr, "  -fast          Fast, low-quality processing\n");
   fprintf(stderr, "  -grayscale     Force grayscale output\n");
+  fprintf(stderr, "  -rgb           Force RGB output\n");
 #ifdef IDCT_SCALING_SUPPORTED
   fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
 #endif
@@ -264,6 +265,10 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       /* Force monochrome output. */
       cinfo->out_color_space = JCS_GRAYSCALE;
 
+    } else if (keymatch(arg, "rgb", 3)) {
+      /* Force RGB output. */
+      cinfo->out_color_space = JCS_RGB;
+
     } else if (keymatch(arg, "map", 3)) {
       /* Quantize to a color map taken from an input file. */
       if (++argn >= argc)	/* advance to next argument */

filelist.txt

@@ -1,6 +1,6 @@
 IJG JPEG LIBRARY:  FILE LIST
 
-Copyright (C) 1994-2012, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1994-2017, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -198,6 +198,7 @@ config.sub
 depcomp
 missing
 ar-lib
+compile
 install-sh	Install shell script for those Unix systems lacking one.
 Makefile.in	Makefile input for configure.
 Makefile.am	Source file for use with Automake to generate Makefile.in.
@@ -206,6 +207,7 @@ jconfig.txt	Template for making jconfig.h by hand.
 mak*.*		Sample makefiles for particular systems.
 jconfig.*	Sample jconfig.h for particular systems.
 libjpeg.map	Script to generate shared library with versioned symbols.
+libjpeg.pc.in	libjpeg.pc pkg-config file input for configure.
 aclocal.m4	M4 macro definitions for use with Autoconf.
 
 Test files (see install.txt for test procedure):

install-sh

@@ -1,7 +1,7 @@
 #!/bin/sh
 # install - install a program, script, or datafile
 
-scriptversion=2011-11-20.07; # UTC
+scriptversion=2016-01-11.22; # UTC
 
 # This originates from X11R5 (mit/util/scripts/install.sh), which was
 # later released in X11R6 (xc/config/util/install.sh) with the
@@ -41,19 +41,15 @@ scriptversion=2011-11-20.07; # UTC
 # This script is compatible with the BSD install script, but was written
 # from scratch.
 
+tab='	'
 nl='
 '
-IFS=" ""	$nl"
+IFS=" $tab$nl"
 
-# set DOITPROG to echo to test this script
+# Set DOITPROG to "echo" to test this script.
 
-# Don't use :- since 4.3BSD and earlier shells don't like it.
 doit=${DOITPROG-}
-if test -z "$doit"; then
+doit_exec=${doit:-exec}
-  doit_exec=exec
-else
-  doit_exec=$doit
-fi
 
 # Put in absolute file names if you don't have them in your path;
 # or use environment vars.
@@ -68,17 +64,6 @@ mvprog=${MVPROG-mv}
 rmprog=${RMPROG-rm}
 stripprog=${STRIPPROG-strip}
 
-posix_glob='?'
-initialize_posix_glob='
-  test "$posix_glob" != "?" || {
-    if (set -f) 2>/dev/null; then
-      posix_glob=
-    else
-      posix_glob=:
-    fi
-  }
-'
-
 posix_mkdir=
 
 # Desired mode of installed file.
@@ -97,7 +82,7 @@ dir_arg=
 dst_arg=
 
 copy_on_change=false
-no_target_directory=
+is_target_a_directory=possibly
 
 usage="\
 Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
@@ -137,46 +122,57 @@ while test $# -ne 0; do
     -d) dir_arg=true;;
 
     -g) chgrpcmd="$chgrpprog $2"
-	shift;;
+        shift;;
 
     --help) echo "$usage"; exit $?;;
 
     -m) mode=$2
-	case $mode in
+        case $mode in
-	  *' '* | *'	'* | *'
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
-'*	  | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
-	    echo "$0: invalid mode: $mode" >&2
+            exit 1;;
-	    exit 1;;
+        esac
-	esac
+        shift;;
-	shift;;
 
     -o) chowncmd="$chownprog $2"
-	shift;;
+        shift;;
 
     -s) stripcmd=$stripprog;;
 
-    -t) dst_arg=$2
+    -t)
-	# Protect names problematic for 'test' and other utilities.
+        is_target_a_directory=always
-	case $dst_arg in
+        dst_arg=$2
-	  -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        # Protect names problematic for 'test' and other utilities.
-	esac
+        case $dst_arg in
-	shift;;
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
 
-    -T) no_target_directory=true;;
+    -T) is_target_a_directory=never;;
 
     --version) echo "$0 $scriptversion"; exit $?;;
 
-    --)	shift
+    --) shift
-	break;;
+        break;;
 
-    -*)	echo "$0: invalid option: $1" >&2
+    -*) echo "$0: invalid option: $1" >&2
-	exit 1;;
+        exit 1;;
 
     *)  break;;
   esac
   shift
 done
 
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
 if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
   # When -d is used, all remaining arguments are directories to create.
   # When -t is used, the destination is already specified.
@@ -207,6 +203,15 @@ if test $# -eq 0; then
   exit 0
 fi
 
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
 if test -z "$dir_arg"; then
   do_exit='(exit $ret); exit $ret'
   trap "ret=129; $do_exit" 1
@@ -223,16 +228,16 @@ if test -z "$dir_arg"; then
 
     *[0-7])
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw='% 200'
+        u_plus_rw='% 200'
       fi
       cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
     *)
       if test -z "$stripcmd"; then
-	u_plus_rw=
+        u_plus_rw=
       else
-	u_plus_rw=,u+rw
+        u_plus_rw=,u+rw
       fi
       cp_umask=$mode$u_plus_rw;;
   esac
@@ -269,41 +274,15 @@ do
     # If destination is a directory, append the input filename; won't work
     # if double slashes aren't ignored.
     if test -d "$dst"; then
-      if test -n "$no_target_directory"; then
+      if test "$is_target_a_directory" = never; then
-	echo "$0: $dst_arg: Is a directory" >&2
+        echo "$0: $dst_arg: Is a directory" >&2
-	exit 1
+        exit 1
       fi
       dstdir=$dst
       dst=$dstdir/`basename "$src"`
       dstdir_status=0
     else
-      # Prefer dirname, but fall back on a substitute if dirname fails.
+      dstdir=`dirname "$dst"`
-      dstdir=`
-	(dirname "$dst") 2>/dev/null ||
-	expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
-	     X"$dst" : 'X\(//\)[^/]' \| \
-	     X"$dst" : 'X\(//\)$' \| \
-	     X"$dst" : 'X\(/\)' \| . 2>/dev/null ||
-	echo X"$dst" |
-	    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)[^/].*/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\/\)$/{
-		   s//\1/
-		   q
-		 }
-		 /^X\(\/\).*/{
-		   s//\1/
-		   q
-		 }
-		 s/.*/./; q'
-      `
-
       test -d "$dstdir"
       dstdir_status=$?
     fi
@@ -314,74 +293,74 @@ do
   if test $dstdir_status != 0; then
     case $posix_mkdir in
       '')
-	# Create intermediate dirs using mode 755 as modified by the umask.
+        # Create intermediate dirs using mode 755 as modified by the umask.
-	# This is like FreeBSD 'install' as of 1997-10-28.
+        # This is like FreeBSD 'install' as of 1997-10-28.
-	umask=`umask`
+        umask=`umask`
-	case $stripcmd.$umask in
+        case $stripcmd.$umask in
-	  # Optimize common cases.
+          # Optimize common cases.
-	  *[2367][2367]) mkdir_umask=$umask;;
+          *[2367][2367]) mkdir_umask=$umask;;
-	  .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
 
-	  *[0-7])
+          *[0-7])
-	    mkdir_umask=`expr $umask + 22 \
+            mkdir_umask=`expr $umask + 22 \
-	      - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 100 % 40 + $umask % 20 \
-	      - $umask % 10 % 4 + $umask % 2
+              - $umask % 10 % 4 + $umask % 2
-	    `;;
+            `;;
-	  *) mkdir_umask=$umask,go-w;;
+          *) mkdir_umask=$umask,go-w;;
-	esac
+        esac
 
-	# With -d, create the new directory with the user-specified mode.
+        # With -d, create the new directory with the user-specified mode.
-	# Otherwise, rely on $mkdir_umask.
+        # Otherwise, rely on $mkdir_umask.
-	if test -n "$dir_arg"; then
+        if test -n "$dir_arg"; then
-	  mkdir_mode=-m$mode
+          mkdir_mode=-m$mode
-	else
+        else
-	  mkdir_mode=
+          mkdir_mode=
-	fi
+        fi
 
-	posix_mkdir=false
+        posix_mkdir=false
-	case $umask in
+        case $umask in
-	  *[123567][0-7][0-7])
+          *[123567][0-7][0-7])
-	    # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
-	    # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
-	    ;;
+            ;;
-	  *)
+          *)
-	    tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
-	    trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
 
-	    if (umask $mkdir_umask &&
+            if (umask $mkdir_umask &&
-		exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
-	    then
+            then
-	      if test -z "$dir_arg" || {
+              if test -z "$dir_arg" || {
-		   # Check for POSIX incompatibilities with -m.
+                   # Check for POSIX incompatibilities with -m.
-		   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
-		   # other-writable bit of parent directory when it shouldn't.
+                   # other-writable bit of parent directory when it shouldn't.
-		   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
-		   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
-		   case $ls_ld_tmpdir in
+                   case $ls_ld_tmpdir in
-		     d????-?r-*) different_mode=700;;
+                     d????-?r-*) different_mode=700;;
-		     d????-?--*) different_mode=755;;
+                     d????-?--*) different_mode=755;;
-		     *) false;;
+                     *) false;;
-		   esac &&
+                   esac &&
-		   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
-		     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
-		     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
-		   }
+                   }
-		 }
+                 }
-	      then posix_mkdir=:
+              then posix_mkdir=:
-	      fi
+              fi
-	      rmdir "$tmpdir/d" "$tmpdir"
+              rmdir "$tmpdir/d" "$tmpdir"
-	    else
+            else
-	      # Remove any dirs left behind by ancient mkdir implementations.
+              # Remove any dirs left behind by ancient mkdir implementations.
-	      rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
-	    fi
+            fi
-	    trap '' 0;;
+            trap '' 0;;
-	esac;;
+        esac;;
     esac
 
     if
       $posix_mkdir && (
-	umask $mkdir_umask &&
+        umask $mkdir_umask &&
-	$doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
       )
     then :
     else
@@ -391,53 +370,51 @@ do
       # directory the slow way, step by step, checking for races as we go.
 
       case $dstdir in
-	/*) prefix='/';;
+        /*) prefix='/';;
-	[-=\(\)!]*) prefix='./';;
+        [-=\(\)!]*) prefix='./';;
-	*)  prefix='';;
+        *)  prefix='';;
       esac
 
-      eval "$initialize_posix_glob"
-
       oIFS=$IFS
       IFS=/
-      $posix_glob set -f
+      set -f
       set fnord $dstdir
       shift
-      $posix_glob set +f
+      set +f
       IFS=$oIFS
 
       prefixes=
 
       for d
       do
-	test X"$d" = X && continue
+        test X"$d" = X && continue
 
-	prefix=$prefix$d
+        prefix=$prefix$d
-	if test -d "$prefix"; then
+        if test -d "$prefix"; then
-	  prefixes=
+          prefixes=
-	else
+        else
-	  if $posix_mkdir; then
+          if $posix_mkdir; then
-	    (umask=$mkdir_umask &&
+            (umask=$mkdir_umask &&
-	     $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
-	    # Don't fail if two instances are running concurrently.
+            # Don't fail if two instances are running concurrently.
-	    test -d "$prefix" || exit 1
+            test -d "$prefix" || exit 1
-	  else
+          else
-	    case $prefix in
+            case $prefix in
-	      *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
-	      *) qprefix=$prefix;;
+              *) qprefix=$prefix;;
-	    esac
+            esac
-	    prefixes="$prefixes '$qprefix'"
+            prefixes="$prefixes '$qprefix'"
-	  fi
+          fi
-	fi
+        fi
-	prefix=$prefix/
+        prefix=$prefix/
       done
 
       if test -n "$prefixes"; then
-	# Don't fail if two instances are running concurrently.
+        # Don't fail if two instances are running concurrently.
-	(umask $mkdir_umask &&
+        (umask $mkdir_umask &&
-	 eval "\$doit_exec \$mkdirprog $prefixes") ||
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
-	  test -d "$dstdir" || exit 1
+          test -d "$dstdir" || exit 1
-	obsolete_mkdir_used=true
+        obsolete_mkdir_used=true
       fi
     fi
   fi
@@ -472,15 +449,12 @@ do
 
     # If -C, don't bother to copy if it wouldn't change the file.
     if $copy_on_change &&
-       old=`LC_ALL=C ls -dlL "$dst"	2>/dev/null` &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
-       new=`LC_ALL=C ls -dlL "$dsttmp"	2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
-
+       set -f &&
-       eval "$initialize_posix_glob" &&
-       $posix_glob set -f &&
        set X $old && old=:$2:$4:$5:$6 &&
        set X $new && new=:$2:$4:$5:$6 &&
-       $posix_glob set +f &&
+       set +f &&
-
        test "$old" = "$new" &&
        $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
     then
@@ -493,24 +467,24 @@ do
       # to itself, or perhaps because mv is so ancient that it does not
       # support -f.
       {
-	# Now remove or move aside any old file at destination location.
+        # Now remove or move aside any old file at destination location.
-	# We try this two ways since rm can't unlink itself on some
+        # We try this two ways since rm can't unlink itself on some
-	# systems and the destination file might be busy for other
+        # systems and the destination file might be busy for other
-	# reasons.  In this case, the final cleanup might fail but the new
+        # reasons.  In this case, the final cleanup might fail but the new
-	# file should still install successfully.
+        # file should still install successfully.
-	{
+        {
-	  test ! -f "$dst" ||
+          test ! -f "$dst" ||
-	  $doit $rmcmd -f "$dst" 2>/dev/null ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
-	  { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
-	    { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
-	  } ||
+          } ||
-	  { echo "$0: cannot unlink or rename $dst" >&2
+          { echo "$0: cannot unlink or rename $dst" >&2
-	    (exit 1); exit 1
+            (exit 1); exit 1
-	  }
+          }
-	} &&
+        } &&
 
-	# Now rename the file to the real destination.
+        # Now rename the file to the real destination.
-	$doit $mvcmd "$dsttmp" "$dst"
+        $doit $mvcmd "$dsttmp" "$dst"
       }
     fi || exit 1
 
@@ -522,6 +496,6 @@ done
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

install.txt

@@ -1,6 +1,6 @@
 INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
 
-Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1991-2017, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -147,9 +147,12 @@ makefile.bcc	jconfig.bcc	MS-DOS or OS/2, Borland C
 makefile.dj	jconfig.dj	MS-DOS, DJGPP (Delorie's port of GNU C)
 makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C (16-bit only)
 makefile.wat	jconfig.wat	MS-DOS, OS/2, or Windows NT, Watcom C
-makefile.vc	jconfig.vc	Windows NT/95, MS Visual C++
+makefile.vc	jconfig.vc	Windows, MS Visual C++
-make*.vc6	jconfig.vc	Windows NT/95, MS Visual C++ 6
+makefile.vs	jconfig.vc	Windows, MS Visual C++ 6 Developer Studio
-make*.v10	jconfig.vc	Windows NT/95, MS Visual C++ 2010 (v10)
+make*.vc6
+makefile.vs	jconfig.vc	Windows, Visual Studio 2017 (v15)
+make*.v15
+makefile.b32	jconfig.vc	Windows, Borland C++ 32-bit (bcc32)
 makefile.mms	jconfig.vms	Digital VMS, with MMS software
 makefile.vms	jconfig.vms	Digital VMS, without MMS software
 
@@ -418,54 +421,58 @@ support as follows:
 	    the directory containing the URT "librle.a" file (typically the
 	    "lib" subdirectory of the URT distribution).
 
-Support for 12-bit-deep pixel data:
+Support for 9-bit to 12-bit deep pixel data:
 
-The JPEG standard allows either 8-bit or 12-bit data precision.  (For color,
+The IJG code currently allows 8, 9, 10, 11, or 12 bits sample data precision.
-this means 8 or 12 bits per channel, of course.)  If you need to work with
+(For color, this means 8 to 12 bits per channel, of course.)  If you need to
-deeper than 8-bit data, you can compile the IJG code for 12-bit operation.
+work with deeper than 8-bit data, you can compile the IJG code for 9-bit to
+12-bit operation.
 To do so:
-  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8.
+  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 9, 10, 11, or 12 rather than 8.
   2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED,
-     because the code for those formats doesn't handle 12-bit data and won't
+     because the code for those formats doesn't handle deeper than 8-bit data
-     even compile.  (The PPM code does work, as explained below.  The GIF
+     and won't even compile.  (The PPM code does work, as explained below.
-     code works too; it scales 8-bit GIF data to and from 12-bit depth
+     The GIF code works too; it scales 8-bit GIF data to and from 12-bit
-     automatically.)
+     depth automatically.)
   3. Compile.  Don't expect "make test" to pass, since the supplied test
      files are for 8-bit data.
 
-Currently, 12-bit support does not work on 16-bit-int machines.
+Currently, 9-bit to 12-bit support does not work on 16-bit-int machines.
 
-Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa;
+Run-time selection and conversion of data precision are currently not
-so you'll want to keep around a regular 8-bit compilation as well.
+supported and may be added later.
-(Run-time selection of data depth, to allow a single copy that does both,
+Exception:  The transcoding part (jpegtran) supports all settings in a
-is possible but would probably slow things down considerably; it's very low
+single instance, since it operates on the level of DCT coefficients and
-on our to-do list.)
+not sample values.
 
-The PPM reader (rdppm.c) can read 12-bit data from either text-format or
+The PPM reader (rdppm.c) can read deeper than 8-bit data from either
-binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
+text-format or binary-format PPM and PGM files.  Binary-format PPM/PGM files
-maxval greater than 255 are assumed to use 2 bytes per sample, MSB first
+which have a maxval greater than 255 are assumed to use 2 bytes per sample,
-(big-endian order).  As of early 1995, 2-byte binary format is not
+MSB first (big-endian order).  As of early 1995, 2-byte binary format is not
 officially supported by the PBMPLUS library, but it is expected that a
 future release of PBMPLUS will support it.  Note that the PPM reader will
 read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
-data is automatically rescaled to either maxval=255 or maxval=4095 as
+data is automatically rescaled to maxval=MAXJSAMPLE as appropriate for the
-appropriate for the cjpeg bit depth.
+cjpeg bit depth.
 
 The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM
-format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12.  Since this
+format, maxval=MAXJSAMPLE, when compiled with BITS_IN_JSAMPLE>8.  Since this
 format is not yet widely supported, you can disable it by compiling wrppm.c
 with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a
 standard 1-byte/sample PPM or PGM file.  (Yes, this means still another copy
 of djpeg to keep around.  But hopefully you won't need it for very long.
 Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.)
 
-Of course, if you are working with 12-bit data, you probably have it stored
+Of course, if you are working with 9-bit to 12-bit data, you probably have
-in some other, nonstandard format.  In that case you'll probably want to
+it stored in some other, nonstandard format.  In that case you'll probably
-write your own I/O modules to read and write your format.
+want to write your own I/O modules to read and write your format.
 
-Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in
+Note:
-order to generate valid Huffman tables.  This is necessary because our
+The standard Huffman tables are only valid for 8-bit data precision.  If
-default Huffman tables only cover 8-bit data.
+you selected more than 8-bit data precision, cjpeg uses arithmetic coding
+by default.  The Huffman encoder normally uses entropy optimization to
+compute usable tables for higher precision.  Otherwise, you'll have to
+supply different default Huffman tables.
 
 Removing code:
 
@@ -859,6 +866,12 @@ add something like this to your jconfig.h file:
 	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
 	typedef unsigned char boolean;
 	#endif
+	#ifndef FALSE		/* in case these macros already exist */
+	#define FALSE	0	/* values of boolean */
+	#endif
+	#ifndef TRUE
+	#define TRUE	1
+	#endif
 	#define HAVE_BOOLEAN	/* prevent jmorecfg.h from redefining it */
 (This is already in jconfig.vc, by the way.)
 
@@ -1008,33 +1021,9 @@ the configuration to prevent jpeglib.h from using extern "C".
 
 Microsoft Windows, Microsoft Visual C++ 6 Developer Studio:
 
-We include makefiles that should work as project files in DevStudio 6.0 or
+We include makefiles that should work as project files in Developer Studio
-later.  There is a library makefile that builds the IJG library as a static
+6.0 or later.  There is a library makefile that builds the IJG library as
-Win32 library, and application makefiles that build the sample applications
+a static Win32 library, and application makefiles that build the sample
-as Win32 console applications.  (Even if you only want the library, we
-recommend building the applications so that you can run the self-test.)
-
-To use:
-1. Open the command prompt, change to the main directory and execute the
-   command line
-	NMAKE /f makefile.vc  setup-vc6
-   This will move jconfig.vc to jconfig.h and makefiles to project files.
-   (Note that the renaming is critical!)
-2. Open the workspace file jpeg.dsw, build the library project.
-   (If you are using DevStudio more recent than 6.0, you'll probably
-   get a message saying that the project files are being updated.)
-3. Open the workspace file apps.dsw, build the application projects.
-4. To perform the self-test, execute the command line
-	NMAKE /f makefile.vc  test-build
-5. Move the application .exe files from `app`\Release to an
-   appropriate location on your path.
-
-
-Microsoft Windows, Microsoft Visual C++ 2010 Developer Studio (v10):
-
-We include makefiles that should work as project files in Visual Studio
-2010 or later.  There is a library makefile that builds the IJG library
-as a static Win32 library, and application makefiles that build the sample
 applications as Win32 console applications.  (Even if you only want the
 library, we recommend building the applications so that you can run the
 self-test.)
@@ -1042,23 +1031,47 @@ self-test.)
 To use:
 1. Open the command prompt, change to the main directory and execute the
    command line
-	NMAKE /f makefile.vc  setup-v10
+	NMAKE /f makefile.vs  setup-vc6
    This will move jconfig.vc to jconfig.h and makefiles to project files.
    (Note that the renaming is critical!)
-2. Open the solution file jpeg.sln, build the library project.
+2. Open the workspace file jpeg.dsw, build the library project.
-   (If you are using Visual Studio more recent than 2010 (v10), you'll
+   (If you are using Developer Studio more recent than 6.0, you'll
    probably get a message saying that the project files are being updated.)
-3. Open the solution file apps.sln, build the application projects.
+3. Open the workspace file apps.dsw, build the application projects.
 4. To perform the self-test, execute the command line
-	NMAKE /f makefile.vc  test-build
+	NMAKE /f makefile.vs  test-build
 5. Move the application .exe files from `app`\Release to an
    appropriate location on your path.
 
-Note:
+
-There seems to be an optimization bug in the compiler which causes the
+Microsoft Windows, Visual Studio 2017 (v15):
-self-test to fail with the color quantization option.
+
-We have disabled optimization for the file jquant2.c in the library
+We include makefiles that should work as project files in Visual Studio
-project file which causes the self-test to pass properly.
+2017 (v15) or later.  There is a library makefile that builds the IJG
+library as a static Win32 library, and application makefiles that build
+the sample applications as Win32 console applications.  (Even if you only
+want the library, we recommend building the applications so that you can
+run the self-test.)
+
+To use:
+1. Open the Developer Command Prompt, change to the main directory and
+   execute the command line
+	NMAKE /f makefile.vs  setup-v15
+   This will move jconfig.vc to jconfig.h and makefiles to project files.
+   (Note that the renaming is critical!)
+2. Open the solution file jpeg.sln, build the library project.
+     a) If you are using Visual Studio more recent than
+	2017 (v15), you'll probably get a message saying
+	that the project files are being updated.
+     b) If necessary, open the project properties and
+	adapt the Windows Target Platform Version in
+	the Configuration Properties, General section;
+	we support the latest version at the time of release.
+3. Open the solution file apps.sln, build the application projects.
+4. To perform the self-test, execute the command line
+	NMAKE /f makefile.vs  test-build
+5. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
 
 
 OS/2, Borland C++:

jcapistd.c

@@ -2,6 +2,7 @@
  * jcapistd.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -145,7 +146,7 @@ jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
     (*cinfo->master->pass_startup) (cinfo);
 
   /* Verify that at least one iMCU row has been passed. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size;
   if (num_lines < lines_per_iMCU_row)
     ERREXIT(cinfo, JERR_BUFFER_SIZE);
 

jcarith.c

@@ -1,7 +1,7 @@
 /*
  * jcarith.c
  *
- * Developed 1997-2012 by Guido Vollbeding.
+ * Developed 1997-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -362,7 +362,6 @@ METHODDEF(boolean)
 encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
-  JBLOCKROW block;
   unsigned char *st;
   int blkn, ci, tbl;
   int v, v2, m;
@@ -381,14 +380,13 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
   /* Encode the MCU data blocks */
   for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
     ci = cinfo->MCU_membership[blkn];
     tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
 
     /* Compute the DC value after the required point transform by Al.
      * This is simply an arithmetic right shift.
      */
-    m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al);
+    m = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al);
 
     /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
 
@@ -453,11 +451,11 @@ METHODDEF(boolean)
 encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
   JBLOCKROW block;
   unsigned char *st;
   int tbl, k, ke;
   int v, v2, m;
-  const int * natural_order;
 
   /* Emit restart marker if needed */
   if (cinfo->restart_interval) {
@@ -552,6 +550,8 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
 /*
  * MCU encoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component,
+ * although the spec is not very clear on the point.
  */
 
 METHODDEF(boolean)
@@ -593,11 +593,11 @@ METHODDEF(boolean)
 encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
   JBLOCKROW block;
   unsigned char *st;
   int tbl, k, ke, kex;
   int v;
-  const int * natural_order;
 
   /* Emit restart marker if needed */
   if (cinfo->restart_interval) {
@@ -692,12 +692,13 @@ METHODDEF(boolean)
 encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
-  jpeg_component_info * compptr;
+  const int * natural_order;
   JBLOCKROW block;
   unsigned char *st;
-  int blkn, ci, tbl, k, ke;
+  int tbl, k, ke;
   int v, v2, m;
-  const int * natural_order;
+  int blkn, ci;
+  jpeg_component_info * compptr;
 
   /* Emit restart marker if needed */
   if (cinfo->restart_interval) {

jccolor.c

@@ -2,7 +2,7 @@
  * jccolor.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
- * Modified 2011-2012 by Guido Vollbeding.
+ * Modified 2011-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -29,13 +29,25 @@ typedef my_color_converter * my_cconvert_ptr;
 /**************** RGB -> YCbCr conversion: most common case **************/
 
 /*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
+ * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011),
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * previously known as Recommendation CCIR 601-1, except that Cb and Cr
- * The conversion equations to be implemented are therefore
+ * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- *	Y  =  0.29900 * R + 0.58700 * G + 0.11400 * B
+ * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999.
- *	Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B  + CENTERJSAMPLE
+ * sYCC (standard luma-chroma-chroma color space with extended gamut)
- *	Cr =  0.50000 * R - 0.41869 * G - 0.08131 * B  + CENTERJSAMPLE
+ * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F.
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ * bg-sRGB and bg-sYCC (big gamut standard color spaces)
+ * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G.
+ * Note that the derived conversion coefficients given in some of these
+ * documents are imprecise.  The general conversion equations are
+ *	Y  = Kr * R + (1 - Kr - Kb) * G + Kb * B
+ *	Cb = 0.5 * (B - Y) / (1 - Kb)
+ *	Cr = 0.5 * (R - Y) / (1 - Kr)
+ * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993
+ * from the 1953 FCC NTSC primaries and CIE Illuminant C),
+ * the conversion equations to be implemented are therefore
+ *	Y  =  0.299 * R + 0.587 * G + 0.114 * B
+ *	Cb = -0.168735892 * R - 0.331264108 * G + 0.5 * B + CENTERJSAMPLE
+ *	Cr =  0.5 * R - 0.418687589 * G - 0.081312411 * B + CENTERJSAMPLE
  * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2,
  * rather than CENTERJSAMPLE, for Cb and Cr.  This gave equal positive and
  * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0)
@@ -49,9 +61,9 @@ typedef my_color_converter * my_cconvert_ptr;
  * For even more speed, we avoid doing any multiplications in the inner loop
  * by precalculating the constants times R,G,B for all possible values.
  * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable.  It's not very reasonable for
+ * for 9-bit to 12-bit samples it is still acceptable.  It's not very
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
+ * reasonable for 16-bit samples, but if you want lossless storage you
- * colorspace anyway.
+ * shouldn't be changing colorspace anyway.
  * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
  * in the tables to save adding them separately in the inner loop.
  */
@@ -96,21 +108,21 @@ rgb_ycc_start (j_compress_ptr cinfo)
 				(TABLE_SIZE * SIZEOF(INT32)));
 
   for (i = 0; i <= MAXJSAMPLE; i++) {
-    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i;
+    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.299) * i;
-    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i;
+    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.587) * i;
-    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i     + ONE_HALF;
+    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.114) * i   + ONE_HALF;
-    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i;
+    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.168735892)) * i;
-    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i;
+    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.331264108)) * i;
     /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
      * This ensures that the maximum output will round to MAXJSAMPLE
      * not MAXJSAMPLE+1, and thus that we don't have to range-limit.
      */
-    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.5) * i    + CBCR_OFFSET + ONE_HALF-1;
 /*  B=>Cb and R=>Cr tables are the same
-    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.5) * i    + CBCR_OFFSET + ONE_HALF-1;
 */
-    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i;
+    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.418687589)) * i;
-    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i;
+    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.081312411)) * i;
   }
 }
 
@@ -274,6 +286,9 @@ cmyk_ycck_convert (j_compress_ptr cinfo,
  * Convert some rows of samples to the JPEG colorspace.
  * [R,G,B] to [R-G,G,B-G] conversion with modulo calculation
  * (forward reversible color transform).
+ * This can be seen as an adaption of the general RGB->YCbCr
+ * conversion equation with Kr = Kb = 0, while replacing the
+ * normalization by modulo calculation.
  */
 
 METHODDEF(void)
@@ -312,7 +327,7 @@ rgb_rgb1_convert (j_compress_ptr cinfo,
 /*
  * Convert some rows of samples to the JPEG colorspace.
  * This version handles grayscale output with no conversion.
- * The source can be either plain grayscale or YCbCr (since Y == gray).
+ * The source can be either plain grayscale or YCC (since Y == gray).
  */
 
 METHODDEF(void)
@@ -439,11 +454,13 @@ jinit_color_converter (j_compress_ptr cinfo)
     break;
 
   case JCS_RGB:
+  case JCS_BG_RGB:
     if (cinfo->input_components != RGB_PIXELSIZE)
       ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
     break;
 
   case JCS_YCbCr:
+  case JCS_BG_YCC:
     if (cinfo->input_components != 3)
       ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
     break;
@@ -460,8 +477,10 @@ jinit_color_converter (j_compress_ptr cinfo)
     break;
   }
 
-  /* Support color transform only for RGB colorspace */
+  /* Support color transform only for RGB colorspaces */
-  if (cinfo->color_transform && cinfo->jpeg_color_space != JCS_RGB)
+  if (cinfo->color_transform &&
+      cinfo->jpeg_color_space != JCS_RGB &&
+      cinfo->jpeg_color_space != JCS_BG_RGB)
     ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
 
   /* Check num_components, set conversion method based on requested space */
@@ -469,20 +488,26 @@ jinit_color_converter (j_compress_ptr cinfo)
   case JCS_GRAYSCALE:
     if (cinfo->num_components != 1)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_GRAYSCALE ||
+    switch (cinfo->in_color_space) {
-	cinfo->in_color_space == JCS_YCbCr)
+    case JCS_GRAYSCALE:
+    case JCS_YCbCr:
+    case JCS_BG_YCC:
       cconvert->pub.color_convert = grayscale_convert;
-    else if (cinfo->in_color_space == JCS_RGB) {
+      break;
+    case JCS_RGB:
       cconvert->pub.start_pass = rgb_ycc_start;
       cconvert->pub.color_convert = rgb_gray_convert;
-    } else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   case JCS_RGB:
+  case JCS_BG_RGB:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB) {
+    if (cinfo->in_color_space == cinfo->jpeg_color_space) {
       switch (cinfo->color_transform) {
       case JCT_NONE:
 	cconvert->pub.color_convert = rgb_convert;
@@ -492,7 +517,6 @@ jinit_color_converter (j_compress_ptr cinfo)
 	break;
       default:
 	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-	break;
       }
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
@@ -501,13 +525,48 @@ jinit_color_converter (j_compress_ptr cinfo)
   case JCS_YCbCr:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB) {
+    switch (cinfo->in_color_space) {
+    case JCS_RGB:
       cconvert->pub.start_pass = rgb_ycc_start;
       cconvert->pub.color_convert = rgb_ycc_convert;
-    } else if (cinfo->in_color_space == JCS_YCbCr)
+      break;
+    case JCS_YCbCr:
       cconvert->pub.color_convert = null_convert;
-    else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
+    break;
+
+  case JCS_BG_YCC:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    switch (cinfo->in_color_space) {
+    case JCS_RGB:
+      /* For conversion from normal RGB input to BG_YCC representation,
+       * the Cb/Cr values are first computed as usual, and then
+       * quantized further after DCT processing by a factor of
+       * 2 in reference to the nominal quantization factor.
+       */
+      /* need quantization scale by factor of 2 after DCT */
+      cinfo->comp_info[1].component_needed = TRUE;
+      cinfo->comp_info[2].component_needed = TRUE;
+      /* compute normal YCC first */
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = rgb_ycc_convert;
+      break;
+    case JCS_YCbCr:
+      /* need quantization scale by factor of 2 after DCT */
+      cinfo->comp_info[1].component_needed = TRUE;
+      cinfo->comp_info[2].component_needed = TRUE;
+      /*FALLTHROUGH*/
+    case JCS_BG_YCC:
+      /* Pass through for BG_YCC input */
+      cconvert->pub.color_convert = null_convert;
+      break;
+    default:
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   case JCS_CMYK:
@@ -522,13 +581,17 @@ jinit_color_converter (j_compress_ptr cinfo)
   case JCS_YCCK:
     if (cinfo->num_components != 4)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_CMYK) {
+    switch (cinfo->in_color_space) {
+    case JCS_CMYK:
       cconvert->pub.start_pass = rgb_ycc_start;
       cconvert->pub.color_convert = cmyk_ycck_convert;
-    } else if (cinfo->in_color_space == JCS_YCCK)
+      break;
+    case JCS_YCCK:
       cconvert->pub.color_convert = null_convert;
-    else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   default:			/* allow null conversion of JCS_UNKNOWN */

jcdctmgr.c

@@ -2,6 +2,7 @@
  * jcdctmgr.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -25,22 +26,30 @@ typedef struct {
   /* Pointer to the DCT routine actually in use */
   forward_DCT_method_ptr do_dct[MAX_COMPONENTS];
 
-  /* The actual post-DCT divisors --- not identical to the quant table
-   * entries, because of scaling (especially for an unnormalized DCT).
-   * Each table is given in normal array order.
-   */
-  DCTELEM * divisors[NUM_QUANT_TBLS];
-
 #ifdef DCT_FLOAT_SUPPORTED
   /* Same as above for the floating-point case. */
   float_DCT_method_ptr do_float_dct[MAX_COMPONENTS];
-  FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
 #endif
 } my_fdct_controller;
 
 typedef my_fdct_controller * my_fdct_ptr;
 
 
+/* The allocated post-DCT divisor tables -- big enough for any
+ * supported variant and not identical to the quant table entries,
+ * because of scaling (especially for an unnormalized DCT) --
+ * are pointed to by dct_table in the per-component comp_info
+ * structures.  Each table is given in normal array order.
+ */
+
+typedef union {
+  DCTELEM int_array[DCTSIZE2];
+#ifdef DCT_FLOAT_SUPPORTED
+  FAST_FLOAT float_array[DCTSIZE2];
+#endif
+} divisor_table;
+
+
 /* The current scaled-DCT routines require ISLOW-style divisor tables,
  * so be sure to compile that code if either ISLOW or SCALING is requested.
  */
@@ -71,7 +80,7 @@ forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
   /* This routine is heavily used, so it's worth coding it tightly. */
   my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
   forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index];
-  DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
+  DCTELEM * divisors = (DCTELEM *) compptr->dct_table;
   DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
   JDIMENSION bi;
 
@@ -134,7 +143,7 @@ forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
   /* This routine is heavily used, so it's worth coding it tightly. */
   my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
   float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index];
-  FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
+  FAST_FLOAT * divisors = (FAST_FLOAT *) compptr->dct_table;
   FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
   JDIMENSION bi;
 
@@ -352,22 +361,17 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 	cinfo->quant_tbl_ptrs[qtblno] == NULL)
       ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
     qtbl = cinfo->quant_tbl_ptrs[qtblno];
-    /* Compute divisors for this quant table */
+    /* Create divisor table from quant table */
-    /* We may do this more than once for same table, but it's not a big deal */
     switch (method) {
 #ifdef PROVIDE_ISLOW_TABLES
     case JDCT_ISLOW:
       /* For LL&M IDCT method, divisors are equal to raw quantization
        * coefficients multiplied by 8 (to counteract scaling).
        */
-      if (fdct->divisors[qtblno] == NULL) {
+      dtbl = (DCTELEM *) compptr->dct_table;
-	fdct->divisors[qtblno] = (DCTELEM *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      DCTSIZE2 * SIZEOF(DCTELEM));
-      }
-      dtbl = fdct->divisors[qtblno];
       for (i = 0; i < DCTSIZE2; i++) {
-	dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3;
+	dtbl[i] =
+	  ((DCTELEM) qtbl->quantval[i]) << (compptr->component_needed ? 4 : 3);
       }
       fdct->pub.forward_DCT[ci] = forward_DCT;
       break;
@@ -395,17 +399,12 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 	};
 	SHIFT_TEMPS
 
-	if (fdct->divisors[qtblno] == NULL) {
+	dtbl = (DCTELEM *) compptr->dct_table;
-	  fdct->divisors[qtblno] = (DCTELEM *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(DCTELEM));
-	}
-	dtbl = fdct->divisors[qtblno];
 	for (i = 0; i < DCTSIZE2; i++) {
 	  dtbl[i] = (DCTELEM)
 	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
 				  (INT32) aanscales[i]),
-		    CONST_BITS-3);
+		    compptr->component_needed ? CONST_BITS-4 : CONST_BITS-3);
 	}
       }
       fdct->pub.forward_DCT[ci] = forward_DCT;
@@ -422,25 +421,20 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 	 * What's actually stored is 1/divisor so that the inner loop can
 	 * use a multiplication rather than a division.
 	 */
-	FAST_FLOAT * fdtbl;
+	FAST_FLOAT * fdtbl = (FAST_FLOAT *) compptr->dct_table;
 	int row, col;
 	static const double aanscalefactor[DCTSIZE] = {
 	  1.0, 1.387039845, 1.306562965, 1.175875602,
 	  1.0, 0.785694958, 0.541196100, 0.275899379
 	};
 
-	if (fdct->float_divisors[qtblno] == NULL) {
-	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(FAST_FLOAT));
-	}
-	fdtbl = fdct->float_divisors[qtblno];
 	i = 0;
 	for (row = 0; row < DCTSIZE; row++) {
 	  for (col = 0; col < DCTSIZE; col++) {
 	    fdtbl[i] = (FAST_FLOAT)
-	      (1.0 / (((double) qtbl->quantval[i] *
+	      (1.0 / ((double) qtbl->quantval[i] *
-		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
+		      aanscalefactor[row] * aanscalefactor[col] *
+		      (compptr->component_needed ? 16.0 : 8.0)));
 	    i++;
 	  }
 	}
@@ -464,19 +458,20 @@ GLOBAL(void)
 jinit_forward_dct (j_compress_ptr cinfo)
 {
   my_fdct_ptr fdct;
-  int i;
+  int ci;
+  jpeg_component_info *compptr;
 
   fdct = (my_fdct_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_fdct_controller));
-  cinfo->fdct = (struct jpeg_forward_dct *) fdct;
+  cinfo->fdct = &fdct->pub;
   fdct->pub.start_pass = start_pass_fdctmgr;
 
-  /* Mark divisor tables unallocated */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-  for (i = 0; i < NUM_QUANT_TBLS; i++) {
+       ci++, compptr++) {
-    fdct->divisors[i] = NULL;
+    /* Allocate a divisor table for each component */
-#ifdef DCT_FLOAT_SUPPORTED
+    compptr->dct_table =
-    fdct->float_divisors[i] = NULL;
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-#endif
+				  SIZEOF(divisor_table));
   }
 }

jchuff.c

@@ -2,7 +2,7 @@
  * jchuff.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2006-2009 by Guido Vollbeding.
+ * Modified 2006-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -308,24 +308,27 @@ emit_bits_s (working_state * state, unsigned int code, int size)
 /* Emit some bits; return TRUE if successful, FALSE if must suspend */
 {
   /* This routine is heavily used, so it's worth coding tightly. */
-  register INT32 put_buffer = (INT32) code;
+  register INT32 put_buffer;
-  register int put_bits = state->cur.put_bits;
+  register int put_bits;
 
   /* if size is 0, caller used an invalid Huffman table entry */
   if (size == 0)
     ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE);
 
-  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
+  /* mask off any extra bits in code */
-  
+  put_buffer = ((INT32) code) & ((((INT32) 1) << size) - 1);
-  put_bits += size;		/* new number of bits in buffer */
+
-  
+  /* new number of bits in buffer */
+  put_bits = size + state->cur.put_bits;
+
   put_buffer <<= 24 - put_bits; /* align incoming bits */
 
-  put_buffer |= state->cur.put_buffer; /* and merge with old buffer contents */
+  /* and merge with old buffer contents */
-  
+  put_buffer |= state->cur.put_buffer;
+
   while (put_bits >= 8) {
     int c = (int) ((put_buffer >> 16) & 0xFF);
-    
+
     emit_byte_s(state, c, return FALSE);
     if (c == 0xFF) {		/* need to stuff a zero byte? */
       emit_byte_s(state, 0, return FALSE);
@@ -347,8 +350,8 @@ emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size)
 /* Emit some bits, unless we are in gather mode */
 {
   /* This routine is heavily used, so it's worth coding tightly. */
-  register INT32 put_buffer = (INT32) code;
+  register INT32 put_buffer;
-  register int put_bits = entropy->saved.put_bits;
+  register int put_bits;
 
   /* if size is 0, caller used an invalid Huffman table entry */
   if (size == 0)
@@ -357,9 +360,11 @@ emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size)
   if (entropy->gather_statistics)
     return;			/* do nothing if we're only getting stats */
 
-  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
+  /* mask off any extra bits in code */
-  
+  put_buffer = ((INT32) code) & ((((INT32) 1) << size) - 1);
-  put_bits += size;		/* new number of bits in buffer */
+
+  /* new number of bits in buffer */
+  put_bits = size + entropy->saved.put_bits;
 
   put_buffer <<= 24 - put_bits; /* align incoming bits */
 
@@ -543,10 +548,7 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
   register int temp, temp2;
   register int nbits;
-  int blkn, ci;
+  int blkn, ci, tbl;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-  jpeg_component_info * compptr;
   ISHIFT_TEMPS
 
   entropy->next_output_byte = cinfo->dest->next_output_byte;
@@ -559,28 +561,27 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
   /* Encode the MCU data blocks */
   for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
     ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
 
     /* Compute the DC value after the required point transform by Al.
      * This is simply an arithmetic right shift.
      */
-    temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al);
+    temp = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al);
 
     /* DC differences are figured on the point-transformed values. */
-    temp = temp2 - entropy->saved.last_dc_val[ci];
+    temp2 = temp - entropy->saved.last_dc_val[ci];
-    entropy->saved.last_dc_val[ci] = temp2;
+    entropy->saved.last_dc_val[ci] = temp;
 
     /* Encode the DC coefficient difference per section G.1.2.1 */
-    temp2 = temp;
+    temp = temp2;
     if (temp < 0) {
       temp = -temp;		/* temp is abs value of input */
       /* For a negative input, want temp2 = bitwise complement of abs(input) */
       /* This code assumes we are on a two's complement machine */
       temp2--;
     }
-    
+
     /* Find the number of bits needed for the magnitude of the coefficient */
     nbits = 0;
     while (temp) {
@@ -592,10 +593,10 @@ encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
      */
     if (nbits > MAX_COEF_BITS+1)
       ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-    
+
     /* Count/emit the Huffman-coded symbol for the number of bits */
-    emit_dc_symbol(entropy, compptr->dc_tbl_no, nbits);
+    emit_dc_symbol(entropy, tbl, nbits);
-    
+
     /* Emit that number of bits of the value, if positive, */
     /* or the complement of its magnitude, if negative. */
     if (nbits)			/* emit_bits rejects calls with size 0 */
@@ -628,12 +629,12 @@ METHODDEF(boolean)
 encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
+  JBLOCKROW block;
   register int temp, temp2;
   register int nbits;
   register int r, k;
   int Se, Al;
-  const int * natural_order;
-  JBLOCKROW block;
 
   entropy->next_output_byte = cinfo->dest->next_output_byte;
   entropy->free_in_buffer = cinfo->dest->free_in_buffer;
@@ -731,18 +732,15 @@ encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 
 /*
  * MCU encoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
+ * Note: we assume such scans can be multi-component,
- * is not very clear on the point.
+ * although the spec is not very clear on the point.
  */
 
 METHODDEF(boolean)
 encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  register int temp;
+  int Al, blkn;
-  int blkn;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
 
   entropy->next_output_byte = cinfo->dest->next_output_byte;
   entropy->free_in_buffer = cinfo->dest->free_in_buffer;
@@ -752,13 +750,12 @@ encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
     if (entropy->restarts_to_go == 0)
       emit_restart_e(entropy, entropy->next_restart_num);
 
+  Al = cinfo->Al;
+
   /* Encode the MCU data blocks */
   for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-
     /* We simply emit the Al'th bit of the DC coefficient value. */
-    temp = (*block)[0];
+    emit_bits_e(entropy, (unsigned int) (MCU_data[blkn][0][0] >> Al), 1);
-    emit_bits_e(entropy, (unsigned int) (temp >> Al), 1);
   }
 
   cinfo->dest->next_output_byte = entropy->next_output_byte;
@@ -786,14 +783,14 @@ METHODDEF(boolean)
 encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
 {
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
+  JBLOCKROW block;
   register int temp;
   register int r, k;
+  int Se, Al;
   int EOB;
   char *BR_buffer;
   unsigned int BR;
-  int Se, Al;
-  const int * natural_order;
-  JBLOCKROW block;
   int absvalues[DCTSIZE2];
 
   entropy->next_output_byte = cinfo->dest->next_output_byte;
@@ -918,7 +915,7 @@ encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
 {
   register int temp, temp2;
   register int nbits;
-  register int k, r, i;
+  register int r, k;
   int Se = state->cinfo->lim_Se;
   const int * natural_order = state->cinfo->natural_order;
 
@@ -960,7 +957,7 @@ encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
   r = 0;			/* r = run length of zeros */
 
   for (k = 1; k <= Se; k++) {
-    if ((temp = block[natural_order[k]]) == 0) {
+    if ((temp2 = block[natural_order[k]]) == 0) {
       r++;
     } else {
       /* if run length > 15, must emit special run-length-16 codes (0xF0) */
@@ -970,7 +967,7 @@ encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
 	r -= 16;
       }
 
-      temp2 = temp;
+      temp = temp2;
       if (temp < 0) {
 	temp = -temp;		/* temp is abs value of input */
 	/* This code assumes we are on a two's complement machine */
@@ -986,8 +983,8 @@ encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val,
 	ERREXIT(state->cinfo, JERR_BAD_DCT_COEF);
 
       /* Emit Huffman symbol for run length / number of bits */
-      i = (r << 4) + nbits;
+      temp = (r << 4) + nbits;
-      if (! emit_bits_s(state, actbl->ehufco[i], actbl->ehufsi[i]))
+      if (! emit_bits_s(state, actbl->ehufco[temp], actbl->ehufsi[temp]))
 	return FALSE;
 
       /* Emit that number of bits of the value, if positive, */
@@ -1124,16 +1121,16 @@ htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
 {
   register int temp;
   register int nbits;
-  register int k, r;
+  register int r, k;
   int Se = cinfo->lim_Se;
   const int * natural_order = cinfo->natural_order;
-  
+
   /* Encode the DC coefficient difference per section F.1.2.1 */
-  
+
   temp = block[0] - last_dc_val;
   if (temp < 0)
     temp = -temp;
-  
+
   /* Find the number of bits needed for the magnitude of the coefficient */
   nbits = 0;
   while (temp) {
@@ -1148,11 +1145,11 @@ htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
 
   /* Count the Huffman symbol for the number of bits */
   dc_counts[nbits]++;
-  
+
   /* Encode the AC coefficients per section F.1.2.2 */
-  
+
   r = 0;			/* r = run length of zeros */
-  
+
   for (k = 1; k <= Se; k++) {
     if ((temp = block[natural_order[k]]) == 0) {
       r++;
@@ -1162,11 +1159,11 @@ htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
 	ac_counts[0xF0]++;
 	r -= 16;
       }
-      
+
       /* Find the number of bits needed for the magnitude of the coefficient */
       if (temp < 0)
 	temp = -temp;
-      
+
       /* Find the number of bits needed for the magnitude of the coefficient */
       nbits = 1;		/* there must be at least one 1 bit */
       while ((temp >>= 1))
@@ -1174,10 +1171,10 @@ htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val,
       /* Check for out-of-range coefficient values */
       if (nbits > MAX_COEF_BITS)
 	ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-      
+
       /* Count Huffman symbol for run length / number of bits */
       ac_counts[(r << 4) + nbits]++;
-      
+
       r = 0;
     }
   }
@@ -1562,7 +1559,7 @@ jinit_huff_encoder (j_compress_ptr cinfo)
   entropy = (huff_entropy_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(huff_entropy_encoder));
-  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
+  cinfo->entropy = &entropy->pub;
   entropy->pub.start_pass = start_pass_huff;
 
   /* Mark tables unallocated */

jcinit.c

@@ -2,6 +2,7 @@
  * jcinit.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -20,6 +21,168 @@
 #include "jpeglib.h"
 
 
+/*
+ * Compute JPEG image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+  /* Sanity check on input image dimensions to prevent overflow in
+   * following calculations.
+   * We do check jpeg_width and jpeg_height in initial_setup in jcmaster.c,
+   * but image_width and image_height can come from arbitrary data,
+   * and we need some space for multiplication by block_size.
+   */
+  if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24))
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+#ifdef DCT_SCALING_SUPPORTED
+
+  /* Compute actual JPEG image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/1 scaling */
+    cinfo->jpeg_width = cinfo->image_width * cinfo->block_size;
+    cinfo->jpeg_height = cinfo->image_height * cinfo->block_size;
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/2 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L);
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/3 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L);
+    cinfo->min_DCT_h_scaled_size = 3;
+    cinfo->min_DCT_v_scaled_size = 3;
+  } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/4 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L);
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/5 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L);
+    cinfo->min_DCT_h_scaled_size = 5;
+    cinfo->min_DCT_v_scaled_size = 5;
+  } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/6 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L);
+    cinfo->min_DCT_h_scaled_size = 6;
+    cinfo->min_DCT_v_scaled_size = 6;
+  } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/7 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L);
+    cinfo->min_DCT_h_scaled_size = 7;
+    cinfo->min_DCT_v_scaled_size = 7;
+  } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/8 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L);
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/9 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L);
+    cinfo->min_DCT_h_scaled_size = 9;
+    cinfo->min_DCT_v_scaled_size = 9;
+  } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/10 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L);
+    cinfo->min_DCT_h_scaled_size = 10;
+    cinfo->min_DCT_v_scaled_size = 10;
+  } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/11 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L);
+    cinfo->min_DCT_h_scaled_size = 11;
+    cinfo->min_DCT_v_scaled_size = 11;
+  } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/12 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L);
+    cinfo->min_DCT_h_scaled_size = 12;
+    cinfo->min_DCT_v_scaled_size = 12;
+  } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/13 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L);
+    cinfo->min_DCT_h_scaled_size = 13;
+    cinfo->min_DCT_v_scaled_size = 13;
+  } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/14 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L);
+    cinfo->min_DCT_h_scaled_size = 14;
+    cinfo->min_DCT_v_scaled_size = 14;
+  } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/15 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L);
+    cinfo->min_DCT_h_scaled_size = 15;
+    cinfo->min_DCT_v_scaled_size = 15;
+  } else {
+    /* Provide block_size/16 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L);
+    cinfo->min_DCT_h_scaled_size = 16;
+    cinfo->min_DCT_v_scaled_size = 16;
+  }
+
+#else /* !DCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->jpeg_width = cinfo->image_width;
+  cinfo->jpeg_height = cinfo->image_height;
+  cinfo->min_DCT_h_scaled_size = DCTSIZE;
+  cinfo->min_DCT_v_scaled_size = DCTSIZE;
+
+#endif /* DCT_SCALING_SUPPORTED */
+}
+
+
 /*
  * Master selection of compression modules.
  * This is done once at the start of processing an image.  We determine
@@ -29,6 +192,27 @@
 GLOBAL(void)
 jinit_compress_master (j_compress_ptr cinfo)
 {
+  long samplesperrow;
+  JDIMENSION jd_samplesperrow;
+
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+  /* Sanity check on input image dimensions */
+  if (cinfo->image_height <= 0 || cinfo->image_width <= 0 ||
+      cinfo->input_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
+  /* Width of an input scanline must be representable as JDIMENSION. */
+  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
+  jd_samplesperrow = (JDIMENSION) samplesperrow;
+  if ((long) jd_samplesperrow != samplesperrow)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+
+  /* Compute JPEG image dimensions and related values. */
+  jpeg_calc_jpeg_dimensions(cinfo);
+
   /* Initialize master control (includes parameter checking/processing) */
   jinit_c_master_control(cinfo, FALSE /* full compression */);
 

jcmarker.c

@@ -2,7 +2,7 @@
  * jcmarker.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2003-2012 by Guido Vollbeding.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -508,8 +508,8 @@ write_marker_byte (j_compress_ptr cinfo, int val)
  * Write datastream header.
  * This consists of an SOI and optional APPn markers.
  * We recommend use of the JFIF marker, but not the Adobe marker,
- * when using YCbCr or grayscale data.  The JFIF marker should NOT
+ * when using YCbCr or grayscale data.  The JFIF marker is also used
- * be used for any other JPEG colorspace.  The Adobe marker is helpful
+ * for other standard JPEG colorspaces.  The Adobe marker is helpful
  * to distinguish RGB, CMYK, and YCCK colorspaces.
  * Note that an application can write additional header markers after
  * jpeg_start_compress returns.

jcmaster.c

@@ -2,7 +2,7 @@
  * jcmaster.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2003-2011 by Guido Vollbeding.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -43,192 +43,12 @@ typedef my_comp_master * my_master_ptr;
  * Support routines that do various essential calculations.
  */
 
-/*
- * Compute JPEG image dimensions and related values.
- * NOTE: this is exported for possible use by application.
- * Hence it mustn't do anything that can't be done twice.
- */
-
-GLOBAL(void)
-jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo)
-/* Do computations that are needed before master selection phase */
-{
-#ifdef DCT_SCALING_SUPPORTED
-
-  /* Sanity check on input image dimensions to prevent overflow in
-   * following calculation.
-   * We do check jpeg_width and jpeg_height in initial_setup below,
-   * but image_width and image_height can come from arbitrary data,
-   * and we need some space for multiplication by block_size.
-   */
-  if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24))
-    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
-
-  /* Compute actual JPEG image dimensions and DCT scaling choices. */
-  if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/1 scaling */
-    cinfo->jpeg_width = cinfo->image_width * cinfo->block_size;
-    cinfo->jpeg_height = cinfo->image_height * cinfo->block_size;
-    cinfo->min_DCT_h_scaled_size = 1;
-    cinfo->min_DCT_v_scaled_size = 1;
-  } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/2 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L);
-    cinfo->min_DCT_h_scaled_size = 2;
-    cinfo->min_DCT_v_scaled_size = 2;
-  } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/3 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L);
-    cinfo->min_DCT_h_scaled_size = 3;
-    cinfo->min_DCT_v_scaled_size = 3;
-  } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/4 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L);
-    cinfo->min_DCT_h_scaled_size = 4;
-    cinfo->min_DCT_v_scaled_size = 4;
-  } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/5 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L);
-    cinfo->min_DCT_h_scaled_size = 5;
-    cinfo->min_DCT_v_scaled_size = 5;
-  } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/6 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L);
-    cinfo->min_DCT_h_scaled_size = 6;
-    cinfo->min_DCT_v_scaled_size = 6;
-  } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/7 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L);
-    cinfo->min_DCT_h_scaled_size = 7;
-    cinfo->min_DCT_v_scaled_size = 7;
-  } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/8 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L);
-    cinfo->min_DCT_h_scaled_size = 8;
-    cinfo->min_DCT_v_scaled_size = 8;
-  } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/9 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L);
-    cinfo->min_DCT_h_scaled_size = 9;
-    cinfo->min_DCT_v_scaled_size = 9;
-  } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/10 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L);
-    cinfo->min_DCT_h_scaled_size = 10;
-    cinfo->min_DCT_v_scaled_size = 10;
-  } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/11 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L);
-    cinfo->min_DCT_h_scaled_size = 11;
-    cinfo->min_DCT_v_scaled_size = 11;
-  } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/12 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L);
-    cinfo->min_DCT_h_scaled_size = 12;
-    cinfo->min_DCT_v_scaled_size = 12;
-  } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/13 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L);
-    cinfo->min_DCT_h_scaled_size = 13;
-    cinfo->min_DCT_v_scaled_size = 13;
-  } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/14 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L);
-    cinfo->min_DCT_h_scaled_size = 14;
-    cinfo->min_DCT_v_scaled_size = 14;
-  } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) {
-    /* Provide block_size/15 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L);
-    cinfo->min_DCT_h_scaled_size = 15;
-    cinfo->min_DCT_v_scaled_size = 15;
-  } else {
-    /* Provide block_size/16 scaling */
-    cinfo->jpeg_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L);
-    cinfo->jpeg_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L);
-    cinfo->min_DCT_h_scaled_size = 16;
-    cinfo->min_DCT_v_scaled_size = 16;
-  }
-
-#else /* !DCT_SCALING_SUPPORTED */
-
-  /* Hardwire it to "no scaling" */
-  cinfo->jpeg_width = cinfo->image_width;
-  cinfo->jpeg_height = cinfo->image_height;
-  cinfo->min_DCT_h_scaled_size = DCTSIZE;
-  cinfo->min_DCT_v_scaled_size = DCTSIZE;
-
-#endif /* DCT_SCALING_SUPPORTED */
-}
-
-
 LOCAL(void)
-jpeg_calc_trans_dimensions (j_compress_ptr cinfo)
+initial_setup (j_compress_ptr cinfo)
-{
-  if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size)
-    ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
-	     cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size);
-
-  cinfo->block_size = cinfo->min_DCT_h_scaled_size;
-}
-
-
-LOCAL(void)
-initial_setup (j_compress_ptr cinfo, boolean transcode_only)
 /* Do computations that are needed before master selection phase */
 {
   int ci, ssize;
   jpeg_component_info *compptr;
-  long samplesperrow;
-  JDIMENSION jd_samplesperrow;
-
-  if (transcode_only)
-    jpeg_calc_trans_dimensions(cinfo);
-  else
-    jpeg_calc_jpeg_dimensions(cinfo);
 
   /* Sanity check on block_size */
   if (cinfo->block_size < 1 || cinfo->block_size > 16)
@@ -251,7 +71,7 @@ initial_setup (j_compress_ptr cinfo, boolean transcode_only)
 
   /* Sanity check on image dimensions */
   if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 ||
-      cinfo->num_components <= 0 || cinfo->input_components <= 0)
+      cinfo->num_components <= 0)
     ERREXIT(cinfo, JERR_EMPTY_IMAGE);
 
   /* Make sure image isn't bigger than I can handle */
@@ -259,14 +79,8 @@ initial_setup (j_compress_ptr cinfo, boolean transcode_only)
       (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
 
-  /* Width of an input scanline must be representable as JDIMENSION. */
+  /* Only 8 to 12 bits data precision are supported for DCT based JPEG */
-  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
+  if (cinfo->data_precision < 8 || cinfo->data_precision > 12)
-  jd_samplesperrow = (JDIMENSION) samplesperrow;
-  if ((long) jd_samplesperrow != samplesperrow)
-    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
-
-  /* For now, precision must match compiled-in value... */
-  if (cinfo->data_precision != BITS_IN_JSAMPLE)
     ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
 
   /* Check that number of components won't exceed internal array sizes */
@@ -339,8 +153,10 @@ initial_setup (j_compress_ptr cinfo, boolean transcode_only)
       jdiv_round_up((long) cinfo->jpeg_height *
 		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
 		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
-    /* Mark component needed (this flag isn't actually used for compression) */
+    /* Don't need quantization scale after DCT,
-    compptr->component_needed = TRUE;
+     * until color conversion says otherwise.
+     */
+    compptr->component_needed = FALSE;
   }
 
   /* Compute number of fully interleaved MCU rows (number of times that
@@ -420,13 +236,9 @@ validate_script (j_compress_ptr cinfo)
        * out-of-range reconstructed DC values during the first DC scan,
        * which might cause problems for some decoders.
        */
-#if BITS_IN_JSAMPLE == 8
-#define MAX_AH_AL 10
-#else
-#define MAX_AH_AL 13
-#endif
       if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
-	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
+	  Ah < 0 || Ah > (cinfo->data_precision > 8 ? 13 : 10) ||
+	  Al < 0 || Al > (cinfo->data_precision > 8 ? 13 : 10))
 	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
       if (Ss == 0) {
 	if (Se != 0)		/* DC and AC together not OK */
@@ -811,14 +623,14 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
   master = (my_master_ptr)
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				  SIZEOF(my_comp_master));
-  cinfo->master = (struct jpeg_comp_master *) master;
+  cinfo->master = &master->pub;
   master->pub.prepare_for_pass = prepare_for_pass;
   master->pub.pass_startup = pass_startup;
   master->pub.finish_pass = finish_pass_master;
   master->pub.is_last_pass = FALSE;
 
   /* Validate parameters, determine derived values */
-  initial_setup(cinfo, transcode_only);
+  initial_setup(cinfo);
 
   if (cinfo->scan_info != NULL) {
 #ifdef C_MULTISCAN_FILES_SUPPORTED
@@ -833,10 +645,14 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
     cinfo->num_scans = 1;
   }
 
-  if ((cinfo->progressive_mode || cinfo->block_size < DCTSIZE) &&
+  if (cinfo->optimize_coding)
-      !cinfo->arith_code)			/*  TEMPORARY HACK ??? */
+    cinfo->arith_code = FALSE; /* disable arithmetic coding */
-    /* assume default tables no good for progressive or downscale mode */
+  else if (! cinfo->arith_code &&
-    cinfo->optimize_coding = TRUE;
+	   (cinfo->progressive_mode ||
+	    (cinfo->block_size > 1 && cinfo->block_size < DCTSIZE)))
+    /* TEMPORARY HACK ??? */
+    /* assume default tables no good for progressive or reduced AC mode */
+    cinfo->optimize_coding = TRUE; /* force Huffman optimization */
 
   /* Initialize my private state */
   if (transcode_only) {

jconfig.cfg

@@ -17,11 +17,17 @@
 /* Define this if you get warnings about undefined structures. */
 #undef INCOMPLETE_TYPES_BROKEN
 
-/* Define "boolean" as unsigned char, not int, on Windows systems. */
+/* Define "boolean" as unsigned char, not enum, on Windows systems. */
 #ifdef _WIN32
 #ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
 typedef unsigned char boolean;
 #endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
 #define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
 #endif
 

jconfig.txt

@@ -2,6 +2,7 @@
  * jconfig.txt
  *
  * Copyright (C) 1991-1994, Thomas G. Lane.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -91,12 +92,18 @@
  */
 #undef INCOMPLETE_TYPES_BROKEN
 
-/* Define "boolean" as unsigned char, not int, on Windows systems.
+/* Define "boolean" as unsigned char, not enum, on Windows systems.
  */
 #ifdef _WIN32
 #ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
 typedef unsigned char boolean;
 #endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
 #define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
 #endif
 

jconfig.vc

@@ -1,4 +1,5 @@
-/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */
+/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 9x or NT. */
+/* This file also works for Borland C++ 32-bit (bcc32) on Windows 9x or NT. */
 /* see jconfig.txt for explanations */
 
 #define HAVE_PROTOTYPES
@@ -19,6 +20,12 @@
 #ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
 typedef unsigned char boolean;
 #endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
 #define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
 
 

jcparam.c

@@ -2,7 +2,7 @@
  * jcparam.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2003-2012 by Guido Vollbeding.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -323,18 +323,17 @@ jpeg_set_defaults (j_compress_ptr cinfo)
   /* Expect normal source image, not raw downsampled data */
   cinfo->raw_data_in = FALSE;
 
-  /* Use Huffman coding, not arithmetic coding, by default */
+  /* The standard Huffman tables are only valid for 8-bit data precision.
-  cinfo->arith_code = FALSE;
+   * If the precision is higher, use arithmetic coding.
+   * (Alternatively, using Huffman coding would be possible with forcing
+   * optimization on so that usable tables will be computed, or by
+   * supplying default tables that are valid for the desired precision.)
+   * Otherwise, use Huffman coding by default.
+   */
+  cinfo->arith_code = cinfo->data_precision > 8 ? TRUE : FALSE;
 
   /* By default, don't do extra passes to optimize entropy coding */
   cinfo->optimize_coding = FALSE;
-  /* The standard Huffman tables are only valid for 8-bit data precision.
-   * If the precision is higher, force optimization on so that usable
-   * tables will be computed.  This test can be removed if default tables
-   * are supplied that are valid for the desired precision.
-   */
-  if (cinfo->data_precision > 8)
-    cinfo->optimize_coding = TRUE;
 
   /* By default, use the simpler non-cosited sampling alignment */
   cinfo->CCIR601_sampling = FALSE;
@@ -360,6 +359,9 @@ jpeg_set_defaults (j_compress_ptr cinfo)
    * JFIF_minor_version to 2.  We could probably get away with just defaulting
    * to 1.02, but there may still be some decoders in use that will complain
    * about that; saying 1.01 should minimize compatibility problems.
+   *
+   * For wide gamut colorspaces (BG_RGB and BG_YCC), the major version will be
+   * overridden by jpeg_set_colorspace and set to 2.
    */
   cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
   cinfo->JFIF_minor_version = 1;
@@ -384,6 +386,9 @@ GLOBAL(void)
 jpeg_default_colorspace (j_compress_ptr cinfo)
 {
   switch (cinfo->in_color_space) {
+  case JCS_UNKNOWN:
+    jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
+    break;
   case JCS_GRAYSCALE:
     jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
     break;
@@ -399,8 +404,12 @@ jpeg_default_colorspace (j_compress_ptr cinfo)
   case JCS_YCCK:
     jpeg_set_colorspace(cinfo, JCS_YCCK);
     break;
-  case JCS_UNKNOWN:
+  case JCS_BG_RGB:
-    jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
+    /* No translation for now -- conversion to BG_YCC not yet supportet */
+    jpeg_set_colorspace(cinfo, JCS_BG_RGB);
+    break;
+  case JCS_BG_YCC:
+    jpeg_set_colorspace(cinfo, JCS_BG_YCC);
     break;
   default:
     ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
@@ -441,29 +450,40 @@ jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
   cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */
 
   switch (colorspace) {
+  case JCS_UNKNOWN:
+    cinfo->num_components = cinfo->input_components;
+    if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	       MAX_COMPONENTS);
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      SET_COMP(ci, ci, 1,1, 0, 0,0);
+    }
+    break;
   case JCS_GRAYSCALE:
     cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
     cinfo->num_components = 1;
     /* JFIF specifies component ID 1 */
-    SET_COMP(0, 1, 1,1, 0, 0,0);
+    SET_COMP(0, 0x01, 1,1, 0, 0,0);
     break;
   case JCS_RGB:
     cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */
     cinfo->num_components = 3;
-    SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0);
+    SET_COMP(0, 0x52 /* 'R' */, 1,1, 0,
-    SET_COMP(1, 0x47 /* 'G' */, 1,1, 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
+    SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x42 /* 'B' */, 1,1, 0,
 		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
 		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
-    SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0);
     break;
   case JCS_YCbCr:
     cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
     cinfo->num_components = 3;
     /* JFIF specifies component IDs 1,2,3 */
     /* We default to 2x2 subsamples of chrominance */
-    SET_COMP(0, 1, 2,2, 0, 0,0);
+    SET_COMP(0, 0x01, 2,2, 0, 0,0);
-    SET_COMP(1, 2, 1,1, 1, 1,1);
+    SET_COMP(1, 0x02, 1,1, 1, 1,1);
-    SET_COMP(2, 3, 1,1, 1, 1,1);
+    SET_COMP(2, 0x03, 1,1, 1, 1,1);
     break;
   case JCS_CMYK:
     cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */
@@ -476,19 +496,33 @@ jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
   case JCS_YCCK:
     cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */
     cinfo->num_components = 4;
-    SET_COMP(0, 1, 2,2, 0, 0,0);
+    SET_COMP(0, 0x01, 2,2, 0, 0,0);
-    SET_COMP(1, 2, 1,1, 1, 1,1);
+    SET_COMP(1, 0x02, 1,1, 1, 1,1);
-    SET_COMP(2, 3, 1,1, 1, 1,1);
+    SET_COMP(2, 0x03, 1,1, 1, 1,1);
-    SET_COMP(3, 4, 2,2, 0, 0,0);
+    SET_COMP(3, 0x04, 2,2, 0, 0,0);
     break;
-  case JCS_UNKNOWN:
+  case JCS_BG_RGB:
-    cinfo->num_components = cinfo->input_components;
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
-    if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
+    cinfo->JFIF_major_version = 2;   /* Set JFIF major version = 2 */
-      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+    cinfo->num_components = 3;
-	       MAX_COMPONENTS);
+    /* Add offset 0x20 to the normal R/G/B component IDs */
-    for (ci = 0; ci < cinfo->num_components; ci++) {
+    SET_COMP(0, 0x72 /* 'r' */, 1,1, 0,
-      SET_COMP(ci, ci, 1,1, 0, 0,0);
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
-    }
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
+    SET_COMP(1, 0x67 /* 'g' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x62 /* 'b' */, 1,1, 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
+    break;
+  case JCS_BG_YCC:
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
+    cinfo->JFIF_major_version = 2;   /* Set JFIF major version = 2 */
+    cinfo->num_components = 3;
+    /* Add offset 0x20 to the normal Cb/Cr component IDs */
+    /* We default to 2x2 subsamples of chrominance */
+    SET_COMP(0, 0x01, 2,2, 0, 0,0);
+    SET_COMP(1, 0x22, 1,1, 1, 1,1);
+    SET_COMP(2, 0x23, 1,1, 1, 1,1);
     break;
   default:
     ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
@@ -572,8 +606,10 @@ jpeg_simple_progression (j_compress_ptr cinfo)
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
   /* Figure space needed for script.  Calculation must match code below! */
-  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
+  if (ncomps == 3 &&
-    /* Custom script for YCbCr color images. */
+      (cinfo->jpeg_color_space == JCS_YCbCr ||
+       cinfo->jpeg_color_space == JCS_BG_YCC)) {
+    /* Custom script for YCC color images. */
     nscans = 10;
   } else {
     /* All-purpose script for other color spaces. */
@@ -588,7 +624,7 @@ jpeg_simple_progression (j_compress_ptr cinfo)
    * multiple compressions without changing the settings.  To avoid a memory
    * leak if jpeg_simple_progression is called repeatedly for the same JPEG
    * object, we try to re-use previously allocated space, and we allocate
-   * enough space to handle YCbCr even if initially asked for grayscale.
+   * enough space to handle YCC even if initially asked for grayscale.
    */
   if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
     cinfo->script_space_size = MAX(nscans, 10);
@@ -600,8 +636,10 @@ jpeg_simple_progression (j_compress_ptr cinfo)
   cinfo->scan_info = scanptr;
   cinfo->num_scans = nscans;
 
-  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
+  if (ncomps == 3 &&
-    /* Custom script for YCbCr color images. */
+      (cinfo->jpeg_color_space == JCS_YCbCr ||
+       cinfo->jpeg_color_space == JCS_BG_YCC)) {
+    /* Custom script for YCC color images. */
     /* Initial DC scan */
     scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
     /* Initial AC scan: get some luma data out in a hurry */

jctrans.c

@@ -2,7 +2,7 @@
  * jctrans.c
  *
  * Copyright (C) 1995-1998, Thomas G. Lane.
- * Modified 2000-2012 by Guido Vollbeding.
+ * Modified 2000-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -85,12 +85,15 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
   jpeg_set_defaults(dstinfo);
   /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
    * Fix it to get the right header markers for the image colorspace.
-   * Note: Entropy table assignment in jpeg_set_colorspace depends
+   * Note: Entropy table assignment in jpeg_set_colorspace
-   * on color_transform.
+   * depends on color_transform.
+   * Adaption is also required for setting the appropriate
+   * entropy coding mode dependent on image data precision.
    */
   dstinfo->color_transform = srcinfo->color_transform;
   jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
   dstinfo->data_precision = srcinfo->data_precision;
+  dstinfo->arith_code = srcinfo->data_precision > 8 ? TRUE : FALSE;
   dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
   /* Copy the source's quantization tables. */
   for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
@@ -143,10 +146,10 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
    * if the application chooses to copy JFIF 1.02 extension markers from
    * the source file, we need to copy the version to make sure we don't
    * emit a file that has 1.02 extensions but a claimed version of 1.01.
-   * We will *not*, however, copy version info from mislabeled "2.01" files.
    */
   if (srcinfo->saw_JFIF_marker) {
-    if (srcinfo->JFIF_major_version == 1) {
+    if (srcinfo->JFIF_major_version == 1 ||
+	srcinfo->JFIF_major_version == 2) {
       dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
       dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
     }
@@ -157,6 +160,18 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
 }
 
 
+LOCAL(void)
+jpeg_calc_trans_dimensions (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+  if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size)
+    ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	     cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size);
+
+  cinfo->block_size = cinfo->min_DCT_h_scaled_size;
+}
+
+
 /*
  * Master selection of compression modules for transcoding.
  * This substitutes for jcinit.c's initialization of the full compressor.
@@ -166,6 +181,9 @@ LOCAL(void)
 transencode_master_selection (j_compress_ptr cinfo,
 			      jvirt_barray_ptr * coef_arrays)
 {
+  /* Do computations that are needed before master selection phase */
+  jpeg_calc_trans_dimensions(cinfo);
+
   /* Initialize master control (includes parameter checking/processing) */
   jinit_c_master_control(cinfo, TRUE /* transcode only */);
 

jdapimin.c

@@ -2,7 +2,7 @@
  * jdapimin.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
- * Modified 2009 by Guido Vollbeding.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -114,8 +114,9 @@ jpeg_abort_decompress (j_decompress_ptr cinfo)
 LOCAL(void)
 default_decompress_parms (j_decompress_ptr cinfo)
 {
+  int cid0, cid1, cid2;
+
   /* Guess the input colorspace, and set output colorspace accordingly. */
-  /* (Wish JPEG committee had provided a real way to specify this...) */
   /* Note application may override our guesses. */
   switch (cinfo->num_components) {
   case 1:
@@ -124,9 +125,22 @@ default_decompress_parms (j_decompress_ptr cinfo)
     break;
     
   case 3:
-    if (cinfo->saw_JFIF_marker) {
+    cid0 = cinfo->comp_info[0].component_id;
-      cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */
+    cid1 = cinfo->comp_info[1].component_id;
-    } else if (cinfo->saw_Adobe_marker) {
+    cid2 = cinfo->comp_info[2].component_id;
+
+    /* First try to guess from the component IDs */
+    if      (cid0 == 0x01 && cid1 == 0x02 && cid2 == 0x03)
+      cinfo->jpeg_color_space = JCS_YCbCr;
+    else if (cid0 == 0x01 && cid1 == 0x22 && cid2 == 0x23)
+      cinfo->jpeg_color_space = JCS_BG_YCC;
+    else if (cid0 == 0x52 && cid1 == 0x47 && cid2 == 0x42)
+      cinfo->jpeg_color_space = JCS_RGB;	/* ASCII 'R', 'G', 'B' */
+    else if (cid0 == 0x72 && cid1 == 0x67 && cid2 == 0x62)
+      cinfo->jpeg_color_space = JCS_BG_RGB;	/* ASCII 'r', 'g', 'b' */
+    else if (cinfo->saw_JFIF_marker)
+      cinfo->jpeg_color_space = JCS_YCbCr;	/* assume it's YCbCr */
+    else if (cinfo->saw_Adobe_marker) {
       switch (cinfo->Adobe_transform) {
       case 0:
 	cinfo->jpeg_color_space = JCS_RGB;
@@ -136,23 +150,12 @@ default_decompress_parms (j_decompress_ptr cinfo)
 	break;
       default:
 	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
+	cinfo->jpeg_color_space = JCS_YCbCr;	/* assume it's YCbCr */
 	break;
       }
     } else {
-      /* Saw no special markers, try to guess from the component IDs */
+      TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
-      int cid0 = cinfo->comp_info[0].component_id;
+      cinfo->jpeg_color_space = JCS_YCbCr;	/* assume it's YCbCr */
-      int cid1 = cinfo->comp_info[1].component_id;
-      int cid2 = cinfo->comp_info[2].component_id;
-
-      if (cid0 == 1 && cid1 == 2 && cid2 == 3)
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */
-      else if (cid0 == 82 && cid1 == 71 && cid2 == 66)
-	cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */
-      else {
-	TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
-      }
     }
     /* Always guess RGB is proper output colorspace. */
     cinfo->out_color_space = JCS_RGB;
@@ -169,7 +172,7 @@ default_decompress_parms (j_decompress_ptr cinfo)
 	break;
       default:
 	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
-	cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */
+	cinfo->jpeg_color_space = JCS_YCCK;	/* assume it's YCCK */
 	break;
       }
     } else {

jdapistd.c

@@ -2,6 +2,7 @@
  * jdapistd.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *

jdarith.c

@@ -1,7 +1,7 @@
 /*
  * jdarith.c
  *
- * Developed 1997-2012 by Guido Vollbeding.
+ * Developed 1997-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -94,7 +94,7 @@ get_byte (j_decompress_ptr cinfo)
  * (instead of fixed) with the bit shift counter CT.
  * Thus, we also need only one (variable instead of
  * fixed size) shift for the LPS/MPS decision, and
- * we can get away with any renormalization update
+ * we can do away with any renormalization update
  * of C (except for new data insertion, of course).
  *
  * I've also introduced a new scheme for accessing
@@ -395,6 +395,8 @@ decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 
 /*
  * MCU decoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component,
+ * although the spec is not very clear on the point.
  */
 
 METHODDEF(boolean)
@@ -743,6 +745,17 @@ start_pass (j_decompress_ptr cinfo)
 }
 
 
+/*
+ * Finish up at the end of an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
+
 /*
  * Module initialization routine for arithmetic entropy decoding.
  */
@@ -758,6 +771,7 @@ jinit_arith_decoder (j_decompress_ptr cinfo)
 				SIZEOF(arith_entropy_decoder));
   cinfo->entropy = &entropy->pub;
   entropy->pub.start_pass = start_pass;
+  entropy->pub.finish_pass = finish_pass;
 
   /* Mark tables unallocated */
   for (i = 0; i < NUM_ARITH_TBLS; i++) {

jdatadst.c

@@ -2,7 +2,7 @@
  * jdatadst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2009-2012 by Guido Vollbeding.
+ * Modified 2009-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -170,9 +170,9 @@ term_destination (j_compress_ptr cinfo)
     if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount)
       ERREXIT(cinfo, JERR_FILE_WRITE);
   }
-  fflush(dest->outfile);
+  JFFLUSH(dest->outfile);
   /* Make sure we wrote the output file OK */
-  if (ferror(dest->outfile))
+  if (JFERROR(dest->outfile))
     ERREXIT(cinfo, JERR_FILE_WRITE);
 }
 

jdatasrc.c

@@ -2,7 +2,7 @@
  * jdatasrc.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2009-2011 by Guido Vollbeding.
+ * Modified 2009-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -247,7 +247,7 @@ jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile)
 
 GLOBAL(void)
 jpeg_mem_src (j_decompress_ptr cinfo,
-	      unsigned char * inbuffer, unsigned long insize)
+	      const unsigned char * inbuffer, unsigned long insize)
 {
   struct jpeg_source_mgr * src;
 
@@ -271,5 +271,5 @@ jpeg_mem_src (j_decompress_ptr cinfo,
   src->resync_to_restart = jpeg_resync_to_restart; /* use default method */
   src->term_source = term_source;
   src->bytes_in_buffer = (size_t) insize;
-  src->next_input_byte = (JOCTET *) inbuffer;
+  src->next_input_byte = (const JOCTET *) inbuffer;
 }

jdcolor.c

@@ -2,7 +2,7 @@
  * jdcolor.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2011-2012 by Guido Vollbeding.
+ * Modified 2011-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,12 +14,18 @@
 #include "jpeglib.h"
 
 
+#if RANGE_BITS < 2
+  /* Deliberate syntax err */
+  Sorry, this code requires 2 or more range extension bits.
+#endif
+
+
 /* Private subobject */
 
 typedef struct {
   struct jpeg_color_deconverter pub; /* public fields */
 
-  /* Private state for YCC->RGB conversion */
+  /* Private state for YCbCr->RGB and BG_YCC->RGB conversion */
   int * Cr_r_tab;		/* => table for Cr to R conversion */
   int * Cb_b_tab;		/* => table for Cb to B conversion */
   INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
@@ -32,22 +38,44 @@ typedef struct {
 typedef my_color_deconverter * my_cconvert_ptr;
 
 
-/**************** YCbCr -> RGB conversion: most common case **************/
+/***************  YCbCr -> RGB conversion: most common case **************/
-/****************   RGB -> Y   conversion: less common case **************/
+/*************** BG_YCC -> RGB conversion: less common case **************/
+/***************    RGB -> Y   conversion: less common case **************/
 
 /*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
+ * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011),
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * previously known as Recommendation CCIR 601-1, except that Cb and Cr
- * The conversion equations to be implemented are therefore
+ * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999.
+ * sYCC (standard luma-chroma-chroma color space with extended gamut)
+ * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F.
+ * bg-sRGB and bg-sYCC (big gamut standard color spaces)
+ * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G.
+ * Note that the derived conversion coefficients given in some of these
+ * documents are imprecise.  The general conversion equations are
  *
- *	R = Y                + 1.40200 * Cr
+ *	R = Y + K * (1 - Kr) * Cr
- *	G = Y - 0.34414 * Cb - 0.71414 * Cr
+ *	G = Y - K * (Kb * (1 - Kb) * Cb + Kr * (1 - Kr) * Cr) / (1 - Kr - Kb)
- *	B = Y + 1.77200 * Cb
+ *	B = Y + K * (1 - Kb) * Cb
  *
- *	Y = 0.29900 * R + 0.58700 * G + 0.11400 * B
+ *	Y = Kr * R + (1 - Kr - Kb) * G + Kb * B
+ *
+ * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993
+ * from the 1953 FCC NTSC primaries and CIE Illuminant C), K = 2 for sYCC,
+ * the conversion equations to be implemented are therefore
+ *
+ *	R = Y + 1.402 * Cr
+ *	G = Y - 0.344136286 * Cb - 0.714136286 * Cr
+ *	B = Y + 1.772 * Cb
+ *
+ *	Y = 0.299 * R + 0.587 * G + 0.114 * B
  *
  * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ * For bg-sYCC, with K = 4, the equations are
+ *
+ *	R = Y + 2.804 * Cr
+ *	G = Y - 0.688272572 * Cb - 1.428272572 * Cr
+ *	B = Y + 3.544 * Cb
  *
  * To avoid floating-point arithmetic, we represent the fractional constants
  * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
@@ -58,9 +86,9 @@ typedef my_color_deconverter * my_cconvert_ptr;
  * For even more speed, we avoid doing any multiplications in the inner loop
  * by precalculating the constants times Cb and Cr for all possible values.
  * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable.  It's not very reasonable for
+ * for 9-bit to 12-bit samples it is still acceptable.  It's not very
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
+ * reasonable for 16-bit samples, but if you want lossless storage you
- * colorspace anyway.
+ * shouldn't be changing colorspace anyway.
  * The Cr=>R and Cb=>B values can be rounded to integers in advance; the
  * values for the G calculation are left scaled up, since we must add them
  * together before rounding.
@@ -84,11 +112,12 @@ typedef my_color_deconverter * my_cconvert_ptr;
 
 
 /*
- * Initialize tables for YCC->RGB colorspace conversion.
+ * Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion.
  */
 
 LOCAL(void)
 build_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Normal case, sYCC */
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
   int i;
@@ -111,17 +140,57 @@ build_ycc_rgb_table (j_decompress_ptr cinfo)
   for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
     /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
     /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
-    /* Cr=>R value is nearest int to 1.40200 * x */
+    /* Cr=>R value is nearest int to 1.402 * x */
     cconvert->Cr_r_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
+		    RIGHT_SHIFT(FIX(1.402) * x + ONE_HALF, SCALEBITS);
-    /* Cb=>B value is nearest int to 1.77200 * x */
+    /* Cb=>B value is nearest int to 1.772 * x */
     cconvert->Cb_b_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
+		    RIGHT_SHIFT(FIX(1.772) * x + ONE_HALF, SCALEBITS);
-    /* Cr=>G value is scaled-up -0.71414 * x */
+    /* Cr=>G value is scaled-up -0.714136286 * x */
-    cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
+    cconvert->Cr_g_tab[i] = (- FIX(0.714136286)) * x;
-    /* Cb=>G value is scaled-up -0.34414 * x */
+    /* Cb=>G value is scaled-up -0.344136286 * x */
     /* We also add in ONE_HALF so that need not do it in inner loop */
-    cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
+    cconvert->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF;
+  }
+}
+
+
+LOCAL(void)
+build_bg_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Wide gamut case, bg-sYCC */
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  int i;
+  INT32 x;
+  SHIFT_TEMPS
+
+  cconvert->Cr_r_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cb_b_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cr_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+  cconvert->Cb_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+
+  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
+    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
+    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
+    /* Cr=>R value is nearest int to 2.804 * x */
+    cconvert->Cr_r_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(2.804) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 3.544 * x */
+    cconvert->Cb_b_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(3.544) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -1.428272572 * x */
+    cconvert->Cr_g_tab[i] = (- FIX(1.428272572)) * x;
+    /* Cb=>G value is scaled-up -0.688272572 * x */
+    /* We also add in ONE_HALF so that need not do it in inner loop */
+    cconvert->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF;
   }
 }
 
@@ -166,19 +235,21 @@ ycc_rgb_convert (j_decompress_ptr cinfo,
       y  = GETJSAMPLE(inptr0[col]);
       cb = GETJSAMPLE(inptr1[col]);
       cr = GETJSAMPLE(inptr2[col]);
-      /* Range-limiting is essential due to noise introduced by DCT losses. */
+      /* Range-limiting is essential due to noise introduced by DCT losses,
-      outptr[RGB_RED] =   range_limit[y + Crrtab[cr]];
+       * for extended gamut (sYCC) and wide gamut (bg-sYCC) encodings.
+       */
+      outptr[RGB_RED]   = range_limit[y + Crrtab[cr]];
       outptr[RGB_GREEN] = range_limit[y +
 			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
 						 SCALEBITS))];
-      outptr[RGB_BLUE] =  range_limit[y + Cbbtab[cb]];
+      outptr[RGB_BLUE]  = range_limit[y + Cbbtab[cb]];
       outptr += RGB_PIXELSIZE;
     }
   }
 }
 
 
-/**************** Cases other than YCbCr -> RGB **************/
+/**************** Cases other than YCC -> RGB ****************/
 
 
 /*
@@ -198,9 +269,9 @@ build_rgb_y_table (j_decompress_ptr cinfo)
 				(TABLE_SIZE * SIZEOF(INT32)));
 
   for (i = 0; i <= MAXJSAMPLE; i++) {
-    rgb_y_tab[i+R_Y_OFF] = FIX(0.29900) * i;
+    rgb_y_tab[i+R_Y_OFF] = FIX(0.299) * i;
-    rgb_y_tab[i+G_Y_OFF] = FIX(0.58700) * i;
+    rgb_y_tab[i+G_Y_OFF] = FIX(0.587) * i;
-    rgb_y_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF;
+    rgb_y_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF;
   }
 }
 
@@ -244,6 +315,9 @@ rgb_gray_convert (j_decompress_ptr cinfo,
 /*
  * [R-G,G,B-G] to [R,G,B] conversion with modulo calculation
  * (inverse color transform).
+ * This can be seen as an adaption of the general YCbCr->RGB
+ * conversion equation with Kr = Kb = 0, while replacing the
+ * normalization by modulo calculation.
  */
 
 METHODDEF(void)
@@ -387,7 +461,7 @@ null_convert (j_decompress_ptr cinfo,
 
 /*
  * Color conversion for grayscale: just copy the data.
- * This also works for YCbCr -> grayscale conversion, in which
+ * This also works for YCC -> grayscale conversion, in which
  * we just copy the Y (luminance) component and ignore chrominance.
  */
 
@@ -466,7 +540,9 @@ ycck_cmyk_convert (j_decompress_ptr cinfo,
       y  = GETJSAMPLE(inptr0[col]);
       cb = GETJSAMPLE(inptr1[col]);
       cr = GETJSAMPLE(inptr2[col]);
-      /* Range-limiting is essential due to noise introduced by DCT losses. */
+      /* Range-limiting is essential due to noise introduced by DCT losses,
+       * and for extended gamut encodings (sYCC).
+       */
       outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];	/* red */
       outptr[1] = range_limit[MAXJSAMPLE - (y +			/* green */
 			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
@@ -516,6 +592,8 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
 
   case JCS_RGB:
   case JCS_YCbCr:
+  case JCS_BG_RGB:
+  case JCS_BG_YCC:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
     break;
@@ -532,8 +610,10 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
     break;
   }
 
-  /* Support color transform only for RGB colorspace */
+  /* Support color transform only for RGB colorspaces */
-  if (cinfo->color_transform && cinfo->jpeg_color_space != JCS_RGB)
+  if (cinfo->color_transform &&
+      cinfo->jpeg_color_space != JCS_RGB &&
+      cinfo->jpeg_color_space != JCS_BG_RGB)
     ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
 
   /* Set out_color_components and conversion method based on requested space.
@@ -544,13 +624,16 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
   switch (cinfo->out_color_space) {
   case JCS_GRAYSCALE:
     cinfo->out_color_components = 1;
-    if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
+    switch (cinfo->jpeg_color_space) {
-	cinfo->jpeg_color_space == JCS_YCbCr) {
+    case JCS_GRAYSCALE:
+    case JCS_YCbCr:
+    case JCS_BG_YCC:
       cconvert->pub.color_convert = grayscale_convert;
       /* For color->grayscale conversion, only the Y (0) component is needed */
       for (ci = 1; ci < cinfo->num_components; ci++)
 	cinfo->comp_info[ci].component_needed = FALSE;
-    } else if (cinfo->jpeg_color_space == JCS_RGB) {
+      break;
+    case JCS_RGB:
       switch (cinfo->color_transform) {
       case JCT_NONE:
 	cconvert->pub.color_convert = rgb_gray_convert;
@@ -560,21 +643,29 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
 	break;
       default:
 	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
-	break;
       }
       build_rgb_y_table(cinfo);
-    } else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   case JCS_RGB:
     cinfo->out_color_components = RGB_PIXELSIZE;
-    if (cinfo->jpeg_color_space == JCS_YCbCr) {
+    switch (cinfo->jpeg_color_space) {
+    case JCS_GRAYSCALE:
+      cconvert->pub.color_convert = gray_rgb_convert;
+      break;
+    case JCS_YCbCr:
       cconvert->pub.color_convert = ycc_rgb_convert;
       build_ycc_rgb_table(cinfo);
-    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
+      break;
-      cconvert->pub.color_convert = gray_rgb_convert;
+    case JCS_BG_YCC:
-    } else if (cinfo->jpeg_color_space == JCS_RGB) {
+      cconvert->pub.color_convert = ycc_rgb_convert;
+      build_bg_ycc_rgb_table(cinfo);
+      break;
+    case JCS_RGB:
       switch (cinfo->color_transform) {
       case JCT_NONE:
 	cconvert->pub.color_convert = rgb_convert;
@@ -584,7 +675,25 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
 	break;
       default:
 	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+      }
+      break;
+    default:
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
+    break;
+
+  case JCS_BG_RGB:
+    cinfo->out_color_components = RGB_PIXELSIZE;
+    if (cinfo->jpeg_color_space == JCS_BG_RGB) {
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_convert;
 	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb1_rgb_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
       }
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
@@ -592,13 +701,17 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
 
   case JCS_CMYK:
     cinfo->out_color_components = 4;
-    if (cinfo->jpeg_color_space == JCS_YCCK) {
+    switch (cinfo->jpeg_color_space) {
+    case JCS_YCCK:
       cconvert->pub.color_convert = ycck_cmyk_convert;
       build_ycc_rgb_table(cinfo);
-    } else if (cinfo->jpeg_color_space == JCS_CMYK) {
+      break;
+    case JCS_CMYK:
       cconvert->pub.color_convert = null_convert;
-    } else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   default:

jdct.h

@@ -2,6 +2,7 @@
  * jdct.h
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -78,13 +79,15 @@ typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
  * converting them to unsigned form (0..MAXJSAMPLE).  The raw outputs could
  * be quite far out of range if the input data is corrupt, so a bulletproof
  * range-limiting step is required.  We use a mask-and-table-lookup method
- * to do the combined operations quickly.  See the comments with
+ * to do the combined operations quickly, assuming that RANGE_CENTER
+ * (defined in jpegint.h) is a power of 2.  See the comments with
  * prepare_range_limit_table (in jdmaster.c) for more info.
  */
 
-#define IDCT_range_limit(cinfo)  ((cinfo)->sample_range_limit + CENTERJSAMPLE)
+#define RANGE_MASK  (RANGE_CENTER * 2 - 1)
+#define RANGE_SUBSET  (RANGE_CENTER - CENTERJSAMPLE)
 
-#define RANGE_MASK  (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */
+#define IDCT_range_limit(cinfo)  ((cinfo)->sample_range_limit - RANGE_SUBSET)
 
 
 /* Short forms of external names for systems with brain-damaged linkers. */
@@ -391,3 +394,23 @@ EXTERN(void) jpeg_idct_1x2
 #ifndef MULTIPLY16V16		/* default definition */
 #define MULTIPLY16V16(var1,var2)  ((var1) * (var2))
 #endif
+
+/* Like RIGHT_SHIFT, but applies to a DCTELEM.
+ * We assume that int right shift is unsigned if INT32 right shift is.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	DCTELEM ishift_temp;
+#if BITS_IN_JSAMPLE == 8
+#define DCTELEMBITS  16		/* DCTELEM may be 16 or 32 bits */
+#else
+#define DCTELEMBITS  32		/* DCTELEM must be 32 bits */
+#endif
+#define IRIGHT_SHIFT(x,shft)  \
+    ((ishift_temp = (x)) < 0 ? \
+     (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \
+     (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif

jddctmgr.c

@@ -2,7 +2,7 @@
  * jddctmgr.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2002-2010 by Guido Vollbeding.
+ * Modified 2002-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -368,7 +368,7 @@ jinit_inverse_dct (j_decompress_ptr cinfo)
   idct = (my_idct_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_idct_controller));
-  cinfo->idct = (struct jpeg_inverse_dct *) idct;
+  cinfo->idct = &idct->pub;
   idct->pub.start_pass = start_pass;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

jdhuff.c

@@ -2,7 +2,7 @@
  * jdhuff.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2006-2012 by Guido Vollbeding.
+ * Modified 2006-2016 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -627,6 +627,22 @@ jpeg_huff_decode (bitread_working_state * state,
 }
 
 
+/*
+ * Finish up at the end of a Huffman-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass_huff (j_decompress_ptr cinfo)
+{
+  huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
+
+  /* Throw away any unused bits remaining in bit buffer; */
+  /* include any full bytes in next_marker's count of discarded bytes */
+  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
+  entropy->bitstate.bits_left = 0;
+}
+
+
 /*
  * Check for a restart marker & resynchronize decoder.
  * Returns FALSE if must suspend.
@@ -638,10 +654,7 @@ process_restart (j_decompress_ptr cinfo)
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
   int ci;
 
-  /* Throw away any unused bits remaining in bit buffer; */
+  finish_pass_huff(cinfo);
-  /* include any full bytes in next_marker's count of discarded bytes */
-  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
-  entropy->bitstate.bits_left = 0;
 
   /* Advance past the RSTn marker */
   if (! (*cinfo->marker->read_restart_marker) (cinfo))
@@ -786,10 +799,6 @@ decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
    */
   if (! entropy->insufficient_data) {
 
-    Se = cinfo->Se;
-    Al = cinfo->Al;
-    natural_order = cinfo->natural_order;
-
     /* Load up working state.
      * We can avoid loading/saving bitread state if in an EOB run.
      */
@@ -801,6 +810,9 @@ decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
       EOBRUN--;			/* ...process it now (we do nothing) */
     else {
       BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
+      Se = cinfo->Se;
+      Al = cinfo->Al;
+      natural_order = cinfo->natural_order;
       block = MCU_data[0];
       tbl = entropy->ac_derived_tbl;
 
@@ -846,17 +858,15 @@ decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 
 /*
  * MCU decoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
+ * Note: we assume such scans can be multi-component,
- * is not very clear on the point.
+ * although the spec is not very clear on the point.
  */
 
 METHODDEF(boolean)
 decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
 {   
   huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy;
-  int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
+  int p1, blkn;
-  int blkn;
-  JBLOCKROW block;
   BITREAD_STATE_VARS;
 
   /* Process restart marker if needed; may have to suspend */
@@ -873,15 +883,15 @@ decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
   /* Load up working state */
   BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
 
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+
   /* Outer loop handles each block in the MCU */
 
   for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-
     /* Encoded data is simply the next bit of the two's-complement DC value */
     CHECK_BIT_BUFFER(br_state, 1, return FALSE);
     if (GET_BITS(1))
-      (*block)[0] |= p1;
+      MCU_data[blkn][0][0] |= p1;
     /* Note: since we use |=, repeating the assignment later is safe */
   }
 
@@ -1517,6 +1527,7 @@ jinit_huff_decoder (j_decompress_ptr cinfo)
 				SIZEOF(huff_entropy_decoder));
   cinfo->entropy = &entropy->pub;
   entropy->pub.start_pass = start_pass_huff_decoder;
+  entropy->pub.finish_pass = finish_pass_huff;
 
   if (cinfo->progressive_mode) {
     /* Create progression status table */

jdinput.c

@@ -2,7 +2,7 @@
  * jdinput.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2002-2009 by Guido Vollbeding.
+ * Modified 2002-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -196,7 +196,7 @@ jpeg_core_output_dimensions (j_decompress_ptr cinfo)
   /* Hardwire it to "no scaling" */
   cinfo->output_width = cinfo->image_width;
   cinfo->output_height = cinfo->image_height;
-  /* jdinput.c has already initialized DCT_scaled_size,
+  /* initial_setup has already initialized DCT_scaled_size,
    * and has computed unscaled downsampled_width and downsampled_height.
    */
 
@@ -216,8 +216,8 @@ initial_setup (j_decompress_ptr cinfo)
       (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
 
-  /* For now, precision must match compiled-in value... */
+  /* Only 8 to 12 bits data precision are supported for DCT based JPEG */
-  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+  if (cinfo->data_precision < 8 || cinfo->data_precision > 12)
     ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
 
   /* Check that number of components won't exceed internal array sizes */
@@ -537,6 +537,7 @@ start_input_pass (j_decompress_ptr cinfo)
 METHODDEF(void)
 finish_input_pass (j_decompress_ptr cinfo)
 {
+  (*cinfo->entropy->finish_pass) (cinfo);
   cinfo->inputctl->consume_input = consume_markers;
 }
 
@@ -646,7 +647,7 @@ jinit_input_controller (j_decompress_ptr cinfo)
   inputctl = (my_inputctl_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
 				SIZEOF(my_input_controller));
-  cinfo->inputctl = (struct jpeg_input_controller *) inputctl;
+  cinfo->inputctl = &inputctl->pub;
   /* Initialize method pointers */
   inputctl->pub.consume_input = consume_markers;
   inputctl->pub.reset_input_controller = reset_input_controller;

jdmainct.c

@@ -2,7 +2,7 @@
  * jdmainct.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2002-2012 by Guido Vollbeding.
+ * Modified 2002-2016 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -26,8 +26,8 @@
  * trivial.  Its responsibility is to provide context rows for upsampling/
  * rescaling, and doing this in an efficient fashion is a bit tricky.
  *
- * Postprocessor input data is counted in "row groups".  A row group
+ * Postprocessor input data is counted in "row groups".  A row group is
- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size)
  * sample rows of each component.  (We require DCT_scaled_size values to be
  * chosen such that these numbers are integers.  In practice DCT_scaled_size
  * values will likely be powers of two, so we actually have the stronger
@@ -37,8 +37,8 @@
  * applying).
  *
  * The coefficient controller will deliver data to us one iMCU row at a time;
- * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
+ * each iMCU row contains v_samp_factor * DCT_v_scaled_size sample rows, or
- * exactly min_DCT_scaled_size row groups.  (This amount of data corresponds
+ * exactly min_DCT_v_scaled_size row groups.  (This amount of data corresponds
  * to one row of MCUs when the image is fully interleaved.)  Note that the
  * number of sample rows varies across components, but the number of row
  * groups does not.  Some garbage sample rows may be included in the last iMCU
@@ -75,7 +75,7 @@
  * We could do this most simply by copying data around in our buffer, but
  * that'd be very slow.  We can avoid copying any data by creating a rather
  * strange pointer structure.  Here's how it works.  We allocate a workspace
- * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
+ * consisting of M+2 row groups (where M = min_DCT_v_scaled_size is the number
  * of row groups per iMCU row).  We create two sets of redundant pointers to
  * the workspace.  Labeling the physical row groups 0 to M+1, the synthesized
  * pointer lists look like this:
@@ -100,11 +100,11 @@
  * the first or last sample row as necessary (this is cheaper than copying
  * sample rows around).
  *
- * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that
+ * This scheme breaks down if M < 2, ie, min_DCT_v_scaled_size is 1.  In that
  * situation each iMCU row provides only one row group so the buffering logic
  * must be different (eg, we must read two iMCU rows before we can emit the
  * first row group).  For now, we simply do not support providing context
- * rows when min_DCT_scaled_size is 1.  That combination seems unlikely to
+ * rows when min_DCT_v_scaled_size is 1.  That combination seems unlikely to
  * be worth providing --- if someone wants a 1/8th-size preview, they probably
  * want it quick and dirty, so a context-free upsampler is sufficient.
  */
@@ -118,17 +118,18 @@ typedef struct {
   /* Pointer to allocated workspace (M or M+2 row groups). */
   JSAMPARRAY buffer[MAX_COMPONENTS];
 
-  boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
   JDIMENSION rowgroup_ctr;	/* counts row groups output to postprocessor */
+  JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
 
   /* Remaining fields are only used in the context case. */
 
+  boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
+
   /* These are the master pointers to the funny-order pointer lists. */
   JSAMPIMAGE xbuffer[2];	/* pointers to weird pointer lists */
 
   int whichptr;			/* indicates which pointer set is now in use */
   int context_state;		/* process_data state machine status */
-  JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
   JDIMENSION iMCU_row_ctr;	/* counts iMCU rows to detect image top/bot */
 } my_main_controller;
 
@@ -195,7 +196,7 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
 LOCAL(void)
 make_funny_pointers (j_decompress_ptr cinfo)
 /* Create the funny pointer lists discussed in the comments above.
- * The actual workspace is already allocated (in main->buffer),
+ * The actual workspace is already allocated (in mainp->buffer),
  * and the space for the pointer lists is allocated too.
  * This routine just fills in the curiously ordered lists.
  * This will be repeated at the beginning of each pass.
@@ -317,12 +318,12 @@ start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
       mainp->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
       mainp->context_state = CTX_PREPARE_FOR_IMCU;
       mainp->iMCU_row_ctr = 0;
+      mainp->buffer_full = FALSE; /* Mark buffer empty */
     } else {
       /* Simple case with no context needed */
       mainp->pub.process_data = process_data_simple_main;
+      mainp->rowgroup_ctr = mainp->rowgroups_avail; /* Mark buffer empty */
     }
-    mainp->buffer_full = FALSE;	/* Mark buffer empty */
-    mainp->rowgroup_ctr = 0;
     break;
 #ifdef QUANT_2PASS_SUPPORTED
   case JBUF_CRANK_DEST:
@@ -348,17 +349,14 @@ process_data_simple_main (j_decompress_ptr cinfo,
 			  JDIMENSION out_rows_avail)
 {
   my_main_ptr mainp = (my_main_ptr) cinfo->main;
-  JDIMENSION rowgroups_avail;
 
   /* Read input data if we haven't filled the main buffer yet */
-  if (! mainp->buffer_full) {
+  if (mainp->rowgroup_ctr >= mainp->rowgroups_avail) {
     if (! (*cinfo->coef->decompress_data) (cinfo, mainp->buffer))
       return;			/* suspension forced, can do nothing more */
-    mainp->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+    mainp->rowgroup_ctr = 0;	/* OK, we have an iMCU row to work with */
   }
 
-  /* There are always min_DCT_scaled_size row groups in an iMCU row. */
-  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_v_scaled_size;
   /* Note: at the bottom of the image, we may pass extra garbage row groups
    * to the postprocessor.  The postprocessor has to check for bottom
    * of image anyway (at row resolution), so no point in us doing it too.
@@ -366,14 +364,8 @@ process_data_simple_main (j_decompress_ptr cinfo,
 
   /* Feed the postprocessor */
   (*cinfo->post->post_process_data) (cinfo, mainp->buffer,
-				     &mainp->rowgroup_ctr, rowgroups_avail,
+			&mainp->rowgroup_ctr, mainp->rowgroups_avail,
-				     output_buf, out_row_ctr, out_rows_avail);
+			output_buf, out_row_ctr, out_rows_avail);
-
-  /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
-  if (mainp->rowgroup_ctr >= rowgroups_avail) {
-    mainp->buffer_full = FALSE;
-    mainp->rowgroup_ctr = 0;
-  }
 }
 
 
@@ -498,7 +490,9 @@ jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
     alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
     ngroups = cinfo->min_DCT_v_scaled_size + 2;
   } else {
+    /* There are always min_DCT_v_scaled_size row groups in an iMCU row. */
     ngroups = cinfo->min_DCT_v_scaled_size;
+    mainp->rowgroups_avail = (JDIMENSION) ngroups;
   }
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

jdmarker.c

@@ -2,7 +2,7 @@
  * jdmarker.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2009-2012 by Guido Vollbeding.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -269,8 +269,8 @@ get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog,
   /* We don't support files in which the image height is initially specified */
   /* as 0 and is later redefined by DNL.  As long as we have to check that,  */
   /* might as well have a general sanity check. */
-  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
+  if (cinfo->image_height <= 0 || cinfo->image_width <= 0 ||
-      || cinfo->num_components <= 0)
+      cinfo->num_components <= 0)
     ERREXIT(cinfo, JERR_EMPTY_IMAGE);
 
   if (length != (cinfo->num_components * 3))
@@ -350,6 +350,9 @@ get_sos (j_decompress_ptr cinfo)
 
     /* Detect the case where component id's are not unique, and, if so, */
     /* create a fake component id using the same logic as in get_sof.   */
+    /* Note:  This also ensures that all of the SOF components are      */
+    /* referenced in the single scan case, which prevents access to     */
+    /* uninitialized memory in later decoding stages. */
     for (ci = 0; ci < i; ci++) {
       if (c == cinfo->cur_comp_info[ci]->component_id) {
 	c = cinfo->cur_comp_info[0]->component_id;
@@ -493,6 +496,8 @@ get_dht (j_decompress_ptr cinfo)
     if (count > 256 || ((INT32) count) > length)
       ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
 
+    MEMZERO(huffval, SIZEOF(huffval)); /* pre-zero array for later copy */
+
     for (i = 0; i < count; i++)
       INPUT_BYTE(cinfo, huffval[i], return FALSE);
 
@@ -735,12 +740,13 @@ examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
     cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
     cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
     /* Check version.
-     * Major version must be 1, anything else signals an incompatible change.
+     * Major version must be 1 or 2, anything else signals an incompatible
+     * change.
      * (We used to treat this as an error, but now it's a nonfatal warning,
      * because some bozo at Hijaak couldn't read the spec.)
      * Minor version should be 0..2, but process anyway if newer.
      */
-    if (cinfo->JFIF_major_version != 1)
+    if (cinfo->JFIF_major_version != 1 && cinfo->JFIF_major_version != 2)
       WARNMS2(cinfo, JWRN_JFIF_MAJOR,
 	      cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
     /* Generate trace messages */

jdmaster.c

@@ -2,7 +2,7 @@
  * jdmaster.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2002-2011 by Guido Vollbeding.
+ * Modified 2002-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -45,13 +45,26 @@ LOCAL(boolean)
 use_merged_upsample (j_decompress_ptr cinfo)
 {
 #ifdef UPSAMPLE_MERGING_SUPPORTED
-  /* Merging is the equivalent of plain box-filter upsampling */
+  /* Merging is the equivalent of plain box-filter upsampling. */
-  if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling)
+  /* The following condition is only needed if fancy shall select
+   * a different upsampling method.  In our current implementation
+   * fancy only affects the DCT scaling, thus we can use fancy
+   * upsampling and merged upsample simultaneously, in particular
+   * with scaled DCT sizes larger than the default DCTSIZE.
+   */
+#if 0
+  if (cinfo->do_fancy_upsampling)
+    return FALSE;
+#endif
+  if (cinfo->CCIR601_sampling)
     return FALSE;
   /* jdmerge.c only supports YCC=>RGB color conversion */
-  if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
+  if ((cinfo->jpeg_color_space != JCS_YCbCr &&
+       cinfo->jpeg_color_space != JCS_BG_YCC) ||
+      cinfo->num_components != 3 ||
       cinfo->out_color_space != JCS_RGB ||
-      cinfo->out_color_components != RGB_PIXELSIZE)
+      cinfo->out_color_components != RGB_PIXELSIZE ||
+      cinfo->color_transform)
     return FALSE;
   /* and it only handles 2h1v or 2h2v sampling ratios */
   if (cinfo->comp_info[0].h_samp_factor != 2 ||
@@ -158,9 +171,11 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
     cinfo->out_color_components = 1;
     break;
   case JCS_RGB:
+  case JCS_BG_RGB:
     cinfo->out_color_components = RGB_PIXELSIZE;
     break;
   case JCS_YCbCr:
+  case JCS_BG_YCC:
     cinfo->out_color_components = 3;
     break;
   case JCS_CMYK:
@@ -196,30 +211,20 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
  * These processes all use a common table prepared by the routine below.
  *
  * For most steps we can mathematically guarantee that the initial value
- * of x is within MAXJSAMPLE+1 of the legal range, so a table running from
+ * of x is within 2*(MAXJSAMPLE+1) of the legal range, so a table running
- * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient.  But for the initial
+ * from -2*(MAXJSAMPLE+1) to 3*MAXJSAMPLE+2 is sufficient.  But for the
- * limiting step (just after the IDCT), a wildly out-of-range value is 
+ * initial limiting step (just after the IDCT), a wildly out-of-range value
- * possible if the input data is corrupt.  To avoid any chance of indexing
+ * is possible if the input data is corrupt.  To avoid any chance of indexing
  * off the end of memory and getting a bad-pointer trap, we perform the
  * post-IDCT limiting thus:
- *		x = range_limit[x & MASK];
+ *		x = (sample_range_limit - SUBSET)[(x + CENTER) & MASK];
  * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
  * samples.  Under normal circumstances this is more than enough range and
  * a correct output will be generated; with bogus input data the mask will
  * cause wraparound, and we will safely generate a bogus-but-in-range output.
  * For the post-IDCT step, we want to convert the data from signed to unsigned
  * representation by adding CENTERJSAMPLE at the same time that we limit it.
- * So the post-IDCT limiting table ends up looking like this:
+ * This is accomplished with SUBSET = CENTER - CENTERJSAMPLE.
- *   CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE,
- *   MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- *   0          (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- *   0,1,...,CENTERJSAMPLE-1
- * Negative inputs select values from the upper half of the table after
- * masking.
- *
- * We can save some space by overlapping the start of the post-IDCT table
- * with the simpler range limiting table.  The post-IDCT table begins at
- * sample_range_limit + CENTERJSAMPLE.
  *
  * Note that the table is allocated in near data space on PCs; it's small
  * enough and used often enough to justify this.
@@ -232,25 +237,18 @@ prepare_range_limit_table (j_decompress_ptr cinfo)
   JSAMPLE * table;
   int i;
 
-  table = (JSAMPLE *)
+  table = (JSAMPLE *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo,
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+    JPOOL_IMAGE, (RANGE_CENTER * 2 + MAXJSAMPLE + 1) * SIZEOF(JSAMPLE));
-		(5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
+  /* First segment of range limit table: limit[x] = 0 for x < 0 */
-  table += (MAXJSAMPLE+1);	/* allow negative subscripts of simple table */
+  MEMZERO(table, RANGE_CENTER * SIZEOF(JSAMPLE));
+  table += RANGE_CENTER;	/* allow negative subscripts of table */
   cinfo->sample_range_limit = table;
-  /* First segment of "simple" table: limit[x] = 0 for x < 0 */
+  /* Main part of range limit table: limit[x] = x */
-  MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
-  /* Main part of "simple" table: limit[x] = x */
   for (i = 0; i <= MAXJSAMPLE; i++)
     table[i] = (JSAMPLE) i;
-  table += CENTERJSAMPLE;	/* Point to where post-IDCT table starts */
+  /* End of range limit table: limit[x] = MAXJSAMPLE for x > MAXJSAMPLE */
-  /* End of simple table, rest of first half of post-IDCT table */
+  for (; i <=  MAXJSAMPLE + RANGE_CENTER; i++)
-  for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
     table[i] = MAXJSAMPLE;
-  /* Second half of post-IDCT table */
-  MEMZERO(table + (2 * (MAXJSAMPLE+1)),
-	  (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
-  MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
-	  cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
 }
 
 
@@ -273,10 +271,19 @@ master_selection (j_decompress_ptr cinfo)
   long samplesperrow;
   JDIMENSION jd_samplesperrow;
 
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
   /* Initialize dimensions and other stuff */
   jpeg_calc_output_dimensions(cinfo);
   prepare_range_limit_table(cinfo);
 
+  /* Sanity check on image dimensions */
+  if (cinfo->output_height <= 0 || cinfo->output_width <= 0 ||
+      cinfo->out_color_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
   /* Width of an output scanline must be representable as JDIMENSION. */
   samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components;
   jd_samplesperrow = (JDIMENSION) samplesperrow;
@@ -521,7 +528,7 @@ jinit_master_decompress (j_decompress_ptr cinfo)
   master = (my_master_ptr)
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				  SIZEOF(my_decomp_master));
-  cinfo->master = (struct jpeg_decomp_master *) master;
+  cinfo->master = &master->pub;
   master->pub.prepare_for_output_pass = prepare_for_output_pass;
   master->pub.finish_output_pass = finish_output_pass;
 

jdmerge.c

@@ -2,6 +2,7 @@
  * jdmerge.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2013-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -23,7 +24,7 @@
  * multiplications needed for color conversion.
  *
  * This file currently provides implementations for the following cases:
- *	YCbCr => RGB color conversion only.
+ *	YCC => RGB color conversion only (YCbCr or BG_YCC).
  *	Sampling ratios of 2h1v or 2h2v.
  *	No scaling needed at upsample time.
  *	Corner-aligned (non-CCIR601) sampling alignment.
@@ -39,6 +40,12 @@
 #ifdef UPSAMPLE_MERGING_SUPPORTED
 
 
+#if RANGE_BITS < 2
+  /* Deliberate syntax err */
+  Sorry, this code requires 2 or more range extension bits.
+#endif
+
+
 /* Private subobject */
 
 typedef struct {
@@ -75,12 +82,13 @@ typedef my_upsampler * my_upsample_ptr;
 
 
 /*
- * Initialize tables for YCC->RGB colorspace conversion.
+ * Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion.
  * This is taken directly from jdcolor.c; see that file for more info.
  */
 
 LOCAL(void)
 build_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Normal case, sYCC */
 {
   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
   int i;
@@ -103,17 +111,57 @@ build_ycc_rgb_table (j_decompress_ptr cinfo)
   for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
     /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
     /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
-    /* Cr=>R value is nearest int to 1.40200 * x */
+    /* Cr=>R value is nearest int to 1.402 * x */
     upsample->Cr_r_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
+		    RIGHT_SHIFT(FIX(1.402) * x + ONE_HALF, SCALEBITS);
-    /* Cb=>B value is nearest int to 1.77200 * x */
+    /* Cb=>B value is nearest int to 1.772 * x */
     upsample->Cb_b_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
+		    RIGHT_SHIFT(FIX(1.772) * x + ONE_HALF, SCALEBITS);
-    /* Cr=>G value is scaled-up -0.71414 * x */
+    /* Cr=>G value is scaled-up -0.714136286 * x */
-    upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
+    upsample->Cr_g_tab[i] = (- FIX(0.714136286)) * x;
-    /* Cb=>G value is scaled-up -0.34414 * x */
+    /* Cb=>G value is scaled-up -0.344136286 * x */
     /* We also add in ONE_HALF so that need not do it in inner loop */
-    upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
+    upsample->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF;
+  }
+}
+
+
+LOCAL(void)
+build_bg_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Wide gamut case, bg-sYCC */
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  int i;
+  INT32 x;
+  SHIFT_TEMPS
+
+  upsample->Cr_r_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  upsample->Cb_b_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  upsample->Cr_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+  upsample->Cb_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+
+  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
+    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
+    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
+    /* Cr=>R value is nearest int to 2.804 * x */
+    upsample->Cr_r_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(2.804) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 3.544 * x */
+    upsample->Cb_b_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(3.544) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -1.428272572 * x */
+    upsample->Cr_g_tab[i] = (- FIX(1.428272572)) * x;
+    /* Cb=>G value is scaled-up -0.688272572 * x */
+    /* We also add in ONE_HALF so that need not do it in inner loop */
+    upsample->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF;
   }
 }
 
@@ -250,32 +298,32 @@ h2v1_merged_upsample (j_decompress_ptr cinfo,
     /* Do the chroma part of the calculation */
     cb = GETJSAMPLE(*inptr1++);
     cr = GETJSAMPLE(*inptr2++);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     /* Fetch 2 Y values and emit 2 pixels */
     y  = GETJSAMPLE(*inptr0++);
-    outptr[RGB_RED] =   range_limit[y + cred];
+    outptr[RGB_RED]   = range_limit[y + cred];
     outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
+    outptr[RGB_BLUE]  = range_limit[y + cblue];
     outptr += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr0++);
-    outptr[RGB_RED] =   range_limit[y + cred];
+    outptr[RGB_RED]   = range_limit[y + cred];
     outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
+    outptr[RGB_BLUE]  = range_limit[y + cblue];
     outptr += RGB_PIXELSIZE;
   }
   /* If image width is odd, do the last output column separately */
   if (cinfo->output_width & 1) {
     cb = GETJSAMPLE(*inptr1);
     cr = GETJSAMPLE(*inptr2);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     y  = GETJSAMPLE(*inptr0);
-    outptr[RGB_RED] =   range_limit[y + cred];
+    outptr[RGB_RED]   = range_limit[y + cred];
     outptr[RGB_GREEN] = range_limit[y + cgreen];
-    outptr[RGB_BLUE] =  range_limit[y + cblue];
+    outptr[RGB_BLUE]  = range_limit[y + cblue];
   }
 }
 
@@ -314,46 +362,46 @@ h2v2_merged_upsample (j_decompress_ptr cinfo,
     /* Do the chroma part of the calculation */
     cb = GETJSAMPLE(*inptr1++);
     cr = GETJSAMPLE(*inptr2++);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     /* Fetch 4 Y values and emit 4 pixels */
     y  = GETJSAMPLE(*inptr00++);
-    outptr0[RGB_RED] =   range_limit[y + cred];
+    outptr0[RGB_RED]   = range_limit[y + cred];
     outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0[RGB_BLUE]  = range_limit[y + cblue];
     outptr0 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr00++);
-    outptr0[RGB_RED] =   range_limit[y + cred];
+    outptr0[RGB_RED]   = range_limit[y + cred];
     outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0[RGB_BLUE]  = range_limit[y + cblue];
     outptr0 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr01++);
-    outptr1[RGB_RED] =   range_limit[y + cred];
+    outptr1[RGB_RED]   = range_limit[y + cred];
     outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1[RGB_BLUE]  = range_limit[y + cblue];
     outptr1 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr01++);
-    outptr1[RGB_RED] =   range_limit[y + cred];
+    outptr1[RGB_RED]   = range_limit[y + cred];
     outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1[RGB_BLUE]  = range_limit[y + cblue];
     outptr1 += RGB_PIXELSIZE;
   }
   /* If image width is odd, do the last output column separately */
   if (cinfo->output_width & 1) {
     cb = GETJSAMPLE(*inptr1);
     cr = GETJSAMPLE(*inptr2);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     y  = GETJSAMPLE(*inptr00);
-    outptr0[RGB_RED] =   range_limit[y + cred];
+    outptr0[RGB_RED]   = range_limit[y + cred];
     outptr0[RGB_GREEN] = range_limit[y + cgreen];
-    outptr0[RGB_BLUE] =  range_limit[y + cblue];
+    outptr0[RGB_BLUE]  = range_limit[y + cblue];
     y  = GETJSAMPLE(*inptr01);
-    outptr1[RGB_RED] =   range_limit[y + cred];
+    outptr1[RGB_RED]   = range_limit[y + cred];
     outptr1[RGB_GREEN] = range_limit[y + cgreen];
-    outptr1[RGB_BLUE] =  range_limit[y + cblue];
+    outptr1[RGB_BLUE]  = range_limit[y + cblue];
   }
 }
 
@@ -374,7 +422,7 @@ jinit_merged_upsampler (j_decompress_ptr cinfo)
   upsample = (my_upsample_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_upsampler));
-  cinfo->upsample = (struct jpeg_upsampler *) upsample;
+  cinfo->upsample = &upsample->pub;
   upsample->pub.start_pass = start_pass_merged_upsample;
   upsample->pub.need_context_rows = FALSE;
 
@@ -394,7 +442,10 @@ jinit_merged_upsampler (j_decompress_ptr cinfo)
     upsample->spare_row = NULL;
   }
 
-  build_ycc_rgb_table(cinfo);
+  if (cinfo->jpeg_color_space == JCS_BG_YCC)
+    build_bg_ycc_rgb_table(cinfo);
+  else
+    build_ycc_rgb_table(cinfo);
 }
 
 #endif /* UPSAMPLE_MERGING_SUPPORTED */

jdsample.c

@@ -2,7 +2,7 @@
  * jdsample.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
- * Modified 2002-2008 by Guido Vollbeding.
+ * Modified 2002-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -296,13 +296,12 @@ jinit_upsampler (j_decompress_ptr cinfo)
   my_upsample_ptr upsample;
   int ci;
   jpeg_component_info * compptr;
-  boolean need_buffer;
   int h_in_group, v_in_group, h_out_group, v_out_group;
 
   upsample = (my_upsample_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_upsampler));
-  cinfo->upsample = (struct jpeg_upsampler *) upsample;
+  cinfo->upsample = &upsample->pub;
   upsample->pub.start_pass = start_pass_upsample;
   upsample->pub.upsample = sep_upsample;
   upsample->pub.need_context_rows = FALSE; /* until we find out differently */
@@ -325,17 +324,17 @@ jinit_upsampler (j_decompress_ptr cinfo)
     h_out_group = cinfo->max_h_samp_factor;
     v_out_group = cinfo->max_v_samp_factor;
     upsample->rowgroup_height[ci] = v_in_group; /* save for use later */
-    need_buffer = TRUE;
     if (! compptr->component_needed) {
       /* Don't bother to upsample an uninteresting component. */
       upsample->methods[ci] = noop_upsample;
-      need_buffer = FALSE;
+      continue;		/* don't need to allocate buffer */
-    } else if (h_in_group == h_out_group && v_in_group == v_out_group) {
+    }
+    if (h_in_group == h_out_group && v_in_group == v_out_group) {
       /* Fullsize components can be processed without any work. */
       upsample->methods[ci] = fullsize_upsample;
-      need_buffer = FALSE;
+      continue;		/* don't need to allocate buffer */
-    } else if (h_in_group * 2 == h_out_group &&
+    }
-	       v_in_group == v_out_group) {
+    if (h_in_group * 2 == h_out_group && v_in_group == v_out_group) {
       /* Special case for 2h1v upsampling */
       upsample->methods[ci] = h2v1_upsample;
     } else if (h_in_group * 2 == h_out_group &&
@@ -350,12 +349,10 @@ jinit_upsampler (j_decompress_ptr cinfo)
       upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group);
     } else
       ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
-    if (need_buffer) {
+    upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
-      upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
-	((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) jround_up((long) cinfo->output_width,
-	 (JDIMENSION) jround_up((long) cinfo->output_width,
+			      (long) cinfo->max_h_samp_factor),
-				(long) cinfo->max_h_samp_factor),
+       (JDIMENSION) cinfo->max_v_samp_factor);
-	 (JDIMENSION) cinfo->max_v_samp_factor);
-    }
   }
 }

jerror.c

@@ -2,7 +2,7 @@
  * jerror.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2012 by Guido Vollbeding.
+ * Modified 2012-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -19,16 +19,16 @@
  * These routines are used by both the compression and decompression code.
  */
 
+#ifdef USE_WINDOWS_MESSAGEBOX
+#include <windows.h>
+#endif
+
 /* this is not a core library module, so it doesn't define JPEG_INTERNALS */
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jversion.h"
 #include "jerror.h"
 
-#ifdef USE_WINDOWS_MESSAGEBOX
-#include <windows.h>
-#endif
-
 #ifndef EXIT_FAILURE		/* define exit() codes if not provided */
 #define EXIT_FAILURE  1
 #endif

jfdctflt.c

@@ -2,7 +2,7 @@
  * jfdctflt.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2003-2009 by Guido Vollbeding.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -48,12 +48,14 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
 /*
  * Perform the forward DCT on one block of samples.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
@@ -89,7 +91,7 @@ jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
 
-    /* Apply unsigned->signed conversion */
+    /* Apply unsigned->signed conversion. */
     dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
     dataptr[4] = tmp10 - tmp11;
 

jfdctfst.c

@@ -2,7 +2,7 @@
  * jfdctfst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2003-2009 by Guido Vollbeding.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -44,7 +44,7 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
@@ -109,6 +109,8 @@
 
 /*
  * Perform the forward DCT on one block of samples.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
@@ -145,7 +147,7 @@ jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
 
-    /* Apply unsigned->signed conversion */
+    /* Apply unsigned->signed conversion. */
     dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
     dataptr[4] = tmp10 - tmp11;
 

jidctflt.c

@@ -2,7 +2,7 @@
  * jidctflt.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
- * Modified 2010 by Guido Vollbeding.
+ * Modified 2010-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -50,7 +50,7 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
@@ -63,6 +63,8 @@
 
 /*
  * Perform dequantization and inverse DCT on one block of coefficients.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
@@ -77,7 +79,7 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   FLOAT_MULT_TYPE * quantptr;
   FAST_FLOAT * wsptr;
   JSAMPROW outptr;
-  JSAMPLE *range_limit = cinfo->sample_range_limit;
+  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
   int ctr;
   FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */
 
@@ -95,14 +97,14 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * With typical images and quantization tables, half or more of the
      * column DCT calculations can be simplified this way.
      */
-    
+
     if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
 	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
 	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
 	inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero */
       FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-      
+
       wsptr[DCTSIZE*0] = dcval;
       wsptr[DCTSIZE*1] = dcval;
       wsptr[DCTSIZE*2] = dcval;
@@ -111,13 +113,13 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
       wsptr[DCTSIZE*5] = dcval;
       wsptr[DCTSIZE*6] = dcval;
       wsptr[DCTSIZE*7] = dcval;
-      
+
       inptr++;			/* advance pointers to next column */
       quantptr++;
       wsptr++;
       continue;
     }
-    
+
     /* Even part */
 
     tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
@@ -135,7 +137,7 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp3 = tmp10 - tmp13;
     tmp1 = tmp11 + tmp12;
     tmp2 = tmp11 - tmp12;
-    
+
     /* Odd part */
 
     tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
@@ -172,7 +174,7 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     quantptr++;
     wsptr++;
   }
-  
+
   /* Pass 2: process rows from work array, store into output array. */
 
   wsptr = workspace;
@@ -183,16 +185,17 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * the simplification applies less often (typically 5% to 10% of the time).
      * And testing floats for zero is relatively expensive, so we don't bother.
      */
-    
+
     /* Even part */
 
-    /* Apply signed->unsigned and prepare float->int conversion */
+    /* Prepare range-limit and float->int conversion */
-    z5 = wsptr[0] + ((FAST_FLOAT) CENTERJSAMPLE + (FAST_FLOAT) 0.5);
+    z5 = wsptr[0] + (((FAST_FLOAT) RANGE_CENTER) + ((FAST_FLOAT) 0.5));
     tmp10 = z5 + wsptr[4];
     tmp11 = z5 - wsptr[4];
 
     tmp13 = wsptr[2] + wsptr[6];
-    tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13;
+    tmp12 = (wsptr[2] - wsptr[6]) *
+	      ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */
 
     tmp0 = tmp10 + tmp13;
     tmp3 = tmp10 - tmp13;
@@ -206,28 +209,28 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     z11 = wsptr[1] + wsptr[7];
     z12 = wsptr[1] - wsptr[7];
 
-    tmp7 = z11 + z13;
+    tmp7 = z11 + z13;		/* phase 5 */
-    tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562);
+    tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */
 
     z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
     tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */
     tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */
 
-    tmp6 = tmp12 - tmp7;
+    tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
     tmp4 = tmp10 - tmp5;
 
     /* Final output stage: float->int conversion and range-limit */
 
-    outptr[0] = range_limit[((int) (tmp0 + tmp7)) & RANGE_MASK];
+    outptr[0] = range_limit[(int) (tmp0 + tmp7) & RANGE_MASK];
-    outptr[7] = range_limit[((int) (tmp0 - tmp7)) & RANGE_MASK];
+    outptr[7] = range_limit[(int) (tmp0 - tmp7) & RANGE_MASK];
-    outptr[1] = range_limit[((int) (tmp1 + tmp6)) & RANGE_MASK];
+    outptr[1] = range_limit[(int) (tmp1 + tmp6) & RANGE_MASK];
-    outptr[6] = range_limit[((int) (tmp1 - tmp6)) & RANGE_MASK];
+    outptr[6] = range_limit[(int) (tmp1 - tmp6) & RANGE_MASK];
-    outptr[2] = range_limit[((int) (tmp2 + tmp5)) & RANGE_MASK];
+    outptr[2] = range_limit[(int) (tmp2 + tmp5) & RANGE_MASK];
-    outptr[5] = range_limit[((int) (tmp2 - tmp5)) & RANGE_MASK];
+    outptr[5] = range_limit[(int) (tmp2 - tmp5) & RANGE_MASK];
-    outptr[3] = range_limit[((int) (tmp3 + tmp4)) & RANGE_MASK];
+    outptr[3] = range_limit[(int) (tmp3 + tmp4) & RANGE_MASK];
-    outptr[4] = range_limit[((int) (tmp3 - tmp4)) & RANGE_MASK];
+    outptr[4] = range_limit[(int) (tmp3 - tmp4) & RANGE_MASK];
-    
+
     wsptr += DCTSIZE;		/* advance pointer to next row */
   }
 }

jidctfst.c

@@ -2,6 +2,7 @@
  * jidctfst.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2015-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -45,7 +46,7 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
@@ -133,35 +134,10 @@
 #endif
 
 
-/* Like DESCALE, but applies to a DCTELEM and produces an int.
- * We assume that int right shift is unsigned if INT32 right shift is.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define ISHIFT_TEMPS	DCTELEM ishift_temp;
-#if BITS_IN_JSAMPLE == 8
-#define DCTELEMBITS  16		/* DCTELEM may be 16 or 32 bits */
-#else
-#define DCTELEMBITS  32		/* DCTELEM must be 32 bits */
-#endif
-#define IRIGHT_SHIFT(x,shft)  \
-    ((ishift_temp = (x)) < 0 ? \
-     (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \
-     (ishift_temp >> (shft)))
-#else
-#define ISHIFT_TEMPS
-#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
-#endif
-
-#ifdef USE_ACCURATE_ROUNDING
-#define IDESCALE(x,n)  ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n))
-#else
-#define IDESCALE(x,n)  ((int) IRIGHT_SHIFT(x, n))
-#endif
-
-
 /*
  * Perform dequantization and inverse DCT on one block of coefficients.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
@@ -180,7 +156,7 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   int ctr;
   int workspace[DCTSIZE2];	/* buffers data between passes */
   SHIFT_TEMPS			/* for DESCALE */
-  ISHIFT_TEMPS			/* for IDESCALE */
+  ISHIFT_TEMPS			/* for IRIGHT_SHIFT */
 
   /* Pass 1: process columns from input, store into work array. */
 
@@ -253,12 +229,12 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
 
     z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
-    tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
+    tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */
-    tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
+    tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */
 
     tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
     wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7);
     wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7);
@@ -266,21 +242,28 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6);
     wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5);
     wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5);
-    wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4);
+    wsptr[DCTSIZE*3] = (int) (tmp3 + tmp4);
-    wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4);
+    wsptr[DCTSIZE*4] = (int) (tmp3 - tmp4);
 
     inptr++;			/* advance pointers to next column */
     quantptr++;
     wsptr++;
   }
   
-  /* Pass 2: process rows from work array, store into output array. */
+  /* Pass 2: process rows from work array, store into output array.
-  /* Note that we must descale the results by a factor of 8 == 2**3, */
+   * Note that we must descale the results by a factor of 8 == 2**3,
-  /* and also undo the PASS1_BITS scaling. */
+   * and also undo the PASS1_BITS scaling.
+   */
 
   wsptr = workspace;
   for (ctr = 0; ctr < DCTSIZE; ctr++) {
     outptr = output_buf[ctr] + output_col;
+
+    /* Add range center and fudge factor for final descale and range-limit. */
+    z5 = (DCTELEM) wsptr[0] +
+	   ((((DCTELEM) RANGE_CENTER) << (PASS1_BITS+3)) +
+	    (1 << (PASS1_BITS+2)));
+
     /* Rows of zeroes can be exploited in the same way as we did with columns.
      * However, the column calculation has created many nonzero AC terms, so
      * the simplification applies less often (typically 5% to 10% of the time).
@@ -293,7 +276,7 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
 	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
       /* AC terms all zero */
-      JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3)
+      JSAMPLE dcval = range_limit[(int) IRIGHT_SHIFT(z5, PASS1_BITS+3)
 				  & RANGE_MASK];
       
       outptr[0] = dcval;
@@ -312,12 +295,12 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     
     /* Even part */
 
-    tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]);
+    tmp10 = z5 + (DCTELEM) wsptr[4];
-    tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]);
+    tmp11 = z5 - (DCTELEM) wsptr[4];
 
-    tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]);
+    tmp13 = (DCTELEM) wsptr[2] + (DCTELEM) wsptr[6];
-    tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562)
+    tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6],
-	    - tmp13;
+		     FIX_1_414213562) - tmp13; /* 2*c4 */
 
     tmp0 = tmp10 + tmp13;
     tmp3 = tmp10 - tmp13;
@@ -335,30 +318,30 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
 
     z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
-    tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
+    tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */
-    tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
+    tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */
 
     tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
     /* Final output stage: scale down by a factor of 8 and range-limit */
 
-    outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3)
+    outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp7, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3)
+    outptr[7] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp7, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3)
+    outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp1 + tmp6, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3)
+    outptr[6] = range_limit[(int) IRIGHT_SHIFT(tmp1 - tmp6, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3)
+    outptr[2] = range_limit[(int) IRIGHT_SHIFT(tmp2 + tmp5, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3)
+    outptr[5] = range_limit[(int) IRIGHT_SHIFT(tmp2 - tmp5, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3)
+    outptr[3] = range_limit[(int) IRIGHT_SHIFT(tmp3 + tmp4, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3)
+    outptr[4] = range_limit[(int) IRIGHT_SHIFT(tmp3 - tmp4, PASS1_BITS+3)
 			    & RANGE_MASK];
 
     wsptr += DCTSIZE;		/* advance pointer to next row */

jinclude.h

@@ -2,6 +2,7 @@
  * jinclude.h
  *
  * Copyright (C) 1991-1994, Thomas G. Lane.
+ * Modified 2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -83,9 +84,14 @@
  * The modules that use fread() and fwrite() always invoke them through
  * these macros.  On some systems you may need to twiddle the argument casts.
  * CAUTION: argument order is different from underlying functions!
+ *
+ * Furthermore, macros are provided for fflush() and ferror() in order
+ * to facilitate adaption by applications using an own FILE class.
  */
 
 #define JFREAD(file,buf,sizeofbuf)  \
   ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
 #define JFWRITE(file,buf,sizeofbuf)  \
   ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
+#define JFFLUSH(file)	fflush(file)
+#define JFERROR(file)	ferror(file)

jmorecfg.h

@@ -2,7 +2,7 @@
  * jmorecfg.h
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2012 by Guido Vollbeding.
+ * Modified 1997-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -15,13 +15,22 @@
 /*
  * Define BITS_IN_JSAMPLE as either
  *   8   for 8-bit sample values (the usual setting)
+ *   9   for 9-bit sample values
+ *   10  for 10-bit sample values
+ *   11  for 11-bit sample values
  *   12  for 12-bit sample values
- * Only 8 and 12 are legal data precisions for lossy JPEG according to the
+ * Only 8, 9, 10, 11, and 12 bits sample data precision are supported for
- * JPEG standard, and the IJG code does not support anything else!
+ * full-feature DCT processing.  Further depths up to 16-bit may be added
- * We do not support run-time selection of data precision, sorry.
+ * later for the lossless modes of operation.
+ * Run-time selection and conversion of data precision will be added later
+ * and are currently not supported, sorry.
+ * Exception:  The transcoding part (jpegtran) supports all settings in a
+ * single instance, since it operates on the level of DCT coefficients and
+ * not sample values.  The DCT coefficients are of the same type (16 bits)
+ * in all cases (see below).
  */
 
-#define BITS_IN_JSAMPLE  8	/* use 8 or 12 */
+#define BITS_IN_JSAMPLE  8	/* use 8, 9, 10, 11, or 12 */
 
 
 /*
@@ -77,6 +86,48 @@ typedef char JSAMPLE;
 #endif /* BITS_IN_JSAMPLE == 8 */
 
 
+#if BITS_IN_JSAMPLE == 9
+/* JSAMPLE should be the smallest type that will hold the values 0..511.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	511
+#define CENTERJSAMPLE	256
+
+#endif /* BITS_IN_JSAMPLE == 9 */
+
+
+#if BITS_IN_JSAMPLE == 10
+/* JSAMPLE should be the smallest type that will hold the values 0..1023.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	1023
+#define CENTERJSAMPLE	512
+
+#endif /* BITS_IN_JSAMPLE == 10 */
+
+
+#if BITS_IN_JSAMPLE == 11
+/* JSAMPLE should be the smallest type that will hold the values 0..2047.
+ * On nearly all machines "short" will do nicely.
+ */
+
+typedef short JSAMPLE;
+#define GETJSAMPLE(value)  ((int) (value))
+
+#define MAXJSAMPLE	2047
+#define CENTERJSAMPLE	1024
+
+#endif /* BITS_IN_JSAMPLE == 11 */
+
+
 #if BITS_IN_JSAMPLE == 12
 /* JSAMPLE should be the smallest type that will hold the values 0..4095.
  * On nearly all machines "short" will do nicely.
@@ -252,7 +303,10 @@ typedef void noreturn_t;
  * Defining HAVE_BOOLEAN before including jpeglib.h should make it work.
  */
 
-#ifdef HAVE_BOOLEAN
+#ifndef HAVE_BOOLEAN
+#if defined FALSE || defined TRUE || defined QGLOBAL_H
+/* Qt3 defines FALSE and TRUE as "const" variables in qglobal.h */
+typedef int boolean;
 #ifndef FALSE			/* in case these macros already exist */
 #define FALSE	0		/* values of boolean */
 #endif
@@ -262,6 +316,7 @@ typedef void noreturn_t;
 #else
 typedef enum { FALSE = 0, TRUE = 1 } boolean;
 #endif
+#endif
 
 
 /*
@@ -299,11 +354,12 @@ typedef enum { FALSE = 0, TRUE = 1 } boolean;
 #define C_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
 #define DCT_SCALING_SUPPORTED	    /* Input rescaling via DCT? (Requires DCT_ISLOW)*/
 #define ENTROPY_OPT_SUPPORTED	    /* Optimization of entropy coding parms? */
-/* Note: if you selected 12-bit data precision, it is dangerous to turn off
+/* Note: if you selected more than 8-bit data precision, it is dangerous to
- * ENTROPY_OPT_SUPPORTED.  The standard Huffman tables are only good for 8-bit
+ * turn off ENTROPY_OPT_SUPPORTED.  The standard Huffman tables are only
- * precision, so jchuff.c normally uses entropy optimization to compute
+ * good for 8-bit precision, so arithmetic coding is recommended for higher
- * usable tables for higher precision.  If you don't want to do optimization,
+ * precision.  The Huffman encoder normally uses entropy optimization to
- * you'll have to supply different default Huffman tables.
+ * compute usable tables for higher precision.  Otherwise, you'll have to
+ * supply different default Huffman tables.
  * The exact same statements apply for progressive JPEG: the default tables
  * don't work for progressive mode.  (This may get fixed, however.)
  */
@@ -314,7 +370,7 @@ typedef enum { FALSE = 0, TRUE = 1 } boolean;
 #define D_ARITH_CODING_SUPPORTED    /* Arithmetic coding back end? */
 #define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */
 #define D_PROGRESSIVE_SUPPORTED	    /* Progressive JPEG? (Requires MULTISCAN)*/
-#define IDCT_SCALING_SUPPORTED	    /* Output rescaling via IDCT? */
+#define IDCT_SCALING_SUPPORTED	    /* Output rescaling via IDCT? (Requires DCT_ISLOW)*/
 #define SAVE_MARKERS_SUPPORTED	    /* jpeg_save_markers() needed? */
 #define BLOCK_SMOOTHING_SUPPORTED   /* Block smoothing? (Progressive only) */
 #undef  UPSAMPLE_SCALING_SUPPORTED  /* Output rescaling at upsample stage? */

jpegint.h

@@ -2,7 +2,7 @@
  * jpegint.h
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 1997-2011 by Guido Vollbeding.
+ * Modified 1997-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -211,8 +211,8 @@ struct jpeg_marker_reader {
 /* Entropy decoding */
 struct jpeg_entropy_decoder {
   JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
-  JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo,
+  JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, JBLOCKROW *MCU_data));
-				JBLOCKROW *MCU_data));
+  JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
 };
 
 /* Inverse DCT (also performs dequantization) */
@@ -260,6 +260,19 @@ struct jpeg_color_quantizer {
 };
 
 
+/* Definition of range extension bits for decompression processes.
+ * See the comments with prepare_range_limit_table (in jdmaster.c)
+ * for more info.
+ * The recommended default value for normal applications is 2.
+ * Applications with special requirements may use a different value.
+ * For example, Ghostscript wants to use 3 for proper handling of
+ * wacky images with oversize coefficient values.
+ */
+
+#define RANGE_BITS	2
+#define RANGE_CENTER	(CENTERJSAMPLE << RANGE_BITS)
+
+
 /* Miscellaneous useful macros */
 
 #undef MAX

jpeglib.h

@@ -2,7 +2,7 @@
  * jpeglib.h
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Modified 2002-2012 by Guido Vollbeding.
+ * Modified 2002-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,12 +39,12 @@ extern "C" {
 
 #define JPEG_LIB_VERSION        90	/* Compatibility version 9.0 */
 #define JPEG_LIB_VERSION_MAJOR  9
-#define JPEG_LIB_VERSION_MINOR  0
+#define JPEG_LIB_VERSION_MINOR  3
 
 
 /* Various constants determining the sizes of things.
- * All of these are specified by the JPEG standard, so don't change them
+ * All of these are specified by the JPEG standard,
- * if you want to be compatible.
+ * so don't change them if you want to be compatible.
  */
 
 #define DCTSIZE		    8	/* The basic DCT block is 8x8 coefficients */
@@ -137,9 +137,9 @@ typedef struct {
   /* The decompressor output side may not use these variables. */
   int dc_tbl_no;		/* DC entropy table selector (0..3) */
   int ac_tbl_no;		/* AC entropy table selector (0..3) */
-  
+
   /* Remaining fields should be treated as private by applications. */
-  
+
   /* These values are computed during compression or decompression startup: */
   /* Component's size in DCT blocks.
    * Any dummy blocks added to complete an MCU are not counted; therefore
@@ -157,16 +157,21 @@ typedef struct {
   /* The downsampled dimensions are the component's actual, unpadded number
    * of samples at the main buffer (preprocessing/compression interface);
    * DCT scaling is included, so
-   * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE)
+   * downsampled_width =
+   *   ceil(image_width * Hi/Hmax * DCT_h_scaled_size/block_size)
    * and similarly for height.
    */
   JDIMENSION downsampled_width;	 /* actual width in samples */
   JDIMENSION downsampled_height; /* actual height in samples */
-  /* This flag is used only for decompression.  In cases where some of the
+  /* For decompression, in cases where some of the components will be
-   * components will be ignored (eg grayscale output from YCbCr image),
+   * ignored (eg grayscale output from YCbCr image), we can skip most
-   * we can skip most computations for the unused components.
+   * computations for the unused components.
+   * For compression, some of the components will need further quantization
+   * scale by factor of 2 after DCT (eg BG_YCC output from normal RGB input).
+   * The field is first set TRUE for decompression, FALSE for compression
+   * in initial_setup, and then adapted in color conversion setup.
    */
-  boolean component_needed;	/* do we need the value of this component? */
+  boolean component_needed;
 
   /* These values are computed before starting a scan of the component. */
   /* The decompressor output side may not use these variables. */
@@ -215,10 +220,12 @@ struct jpeg_marker_struct {
 typedef enum {
 	JCS_UNKNOWN,		/* error/unspecified */
 	JCS_GRAYSCALE,		/* monochrome */
-	JCS_RGB,		/* red/green/blue */
+	JCS_RGB,		/* red/green/blue, standard RGB (sRGB) */
-	JCS_YCbCr,		/* Y/Cb/Cr (also known as YUV) */
+	JCS_YCbCr,		/* Y/Cb/Cr (also known as YUV), standard YCC */
 	JCS_CMYK,		/* C/M/Y/K */
-	JCS_YCCK		/* Y/Cb/Cr/K */
+	JCS_YCCK,		/* Y/Cb/Cr/K */
+	JCS_BG_RGB,		/* big gamut red/green/blue, bg-sRGB */
+	JCS_BG_YCC		/* big gamut Y/Cb/Cr, bg-sYCC */
 } J_COLOR_SPACE;
 
 /* Supported color transforms. */
@@ -404,10 +411,10 @@ struct jpeg_compress_struct {
   JDIMENSION total_iMCU_rows;	/* # of iMCU rows to be input to coef ctlr */
   /* The coefficient controller receives data in units of MCU rows as defined
    * for fully interleaved scans (whether the JPEG file is interleaved or not).
-   * There are v_samp_factor * DCTSIZE sample rows of each component in an
+   * There are v_samp_factor * DCT_v_scaled_size sample rows of each component
-   * "iMCU" (interleaved MCU) row.
+   * in an "iMCU" (interleaved MCU) row.
    */
-  
+
   /*
    * These fields are valid during any one scan.
    * They describe the components and MCUs actually appearing in the scan.
@@ -415,10 +422,10 @@ struct jpeg_compress_struct {
   int comps_in_scan;		/* # of JPEG components in this scan */
   jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN];
   /* *cur_comp_info[i] describes component that appears i'th in SOS */
-  
+
   JDIMENSION MCUs_per_row;	/* # of MCUs across the image */
   JDIMENSION MCU_rows_in_scan;	/* # of MCU rows in the image */
-  
+
   int blocks_in_MCU;		/* # of DCT blocks per MCU */
   int MCU_membership[C_MAX_BLOCKS_IN_MCU];
   /* MCU_membership[i] is index in cur_comp_info of component owning */
@@ -629,7 +636,7 @@ struct jpeg_decompress_struct {
    * in fully interleaved JPEG scans, but are used whether the scan is
    * interleaved or not.  We define an iMCU row as v_samp_factor DCT block
    * rows of each component.  Therefore, the IDCT output contains
-   * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row.
+   * v_samp_factor * DCT_v_scaled_size sample rows of a component per iMCU row.
    */
 
   JSAMPLE * sample_range_limit; /* table for fast range-limiting */
@@ -704,7 +711,7 @@ struct jpeg_error_mgr {
 #define JMSG_LENGTH_MAX  200	/* recommended size of format_message buffer */
   /* Reset error state variables at start of a new image */
   JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo));
-  
+
   /* The message ID code and any parameters are saved here.
    * A message can have one string parameter or up to 8 int parameters.
    */
@@ -714,11 +721,11 @@ struct jpeg_error_mgr {
     int i[8];
     char s[JMSG_STR_PARM_MAX];
   } msg_parm;
-  
+
   /* Standard state variables for error facility */
-  
+
   int trace_level;		/* max msg_level that will be displayed */
-  
+
   /* For recoverable corrupt-data errors, we emit a warning message,
    * but keep going unless emit_message chooses to abort.  emit_message
    * should count warnings in num_warnings.  The surrounding application
@@ -972,7 +979,7 @@ EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo,
 			       unsigned char ** outbuffer,
 			       unsigned long * outsize));
 EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo,
-			      unsigned char * inbuffer,
+			      const unsigned char * inbuffer,
 			      unsigned long insize));
 
 /* Default parameter setup for compression */

jpegtran.1

@@ -1,4 +1,4 @@
-.TH JPEGTRAN 1 "28 December 2009"
+.TH JPEGTRAN 1 "30 September 2017"
 .SH NAME
 jpegtran \- lossless transformation of JPEG files
 .SH SYNOPSIS
@@ -19,6 +19,10 @@ for example from baseline JPEG to progressive JPEG or vice versa.  It can also
 perform some rearrangements of the image data, for example turning an image
 from landscape to portrait format by rotation.
 .PP
+For EXIF files and JPEG files containing Exif data, you may prefer to use
+.B exiftran
+instead.
+.PP
 .B jpegtran
 works by rearranging the compressed data (DCT coefficients), without
 ever fully decoding the image.  Therefore, its transformations are lossless:
@@ -28,7 +32,11 @@ followed by
 .B cjpeg
 to accomplish the same conversion.  But by the same token,
 .B jpegtran
-cannot perform lossy operations such as changing the image quality.
+cannot perform lossy operations such as changing the image quality.  However,
+while the image data is losslessly transformed, metadata can be removed.  See
+the
+.B \-copy
+option for specifics.
 .PP
 .B jpegtran
 reads the named JPEG/JFIF file, or the standard input if no file is
@@ -156,15 +164,27 @@ image region but losslessly preserves what is inside.  Like the rotate and
 flip transforms, lossless crop is restricted by the current JPEG format: the
 upper left corner of the selected region must fall on an iMCU boundary.  If
 this does not hold for the given crop parameters, we silently move the upper
-left corner up and/or left to make it so, simultaneously increasing the region
+left corner up and/or left to make it so, simultaneously increasing the
-dimensions to keep the lower right crop corner unchanged.  (Thus, the output
+region dimensions to keep the lower right crop corner unchanged.  (Thus, the
-image covers at least the requested region, but may cover more.)
+output image covers at least the requested region, but may cover more.)
+The adjustment of the region dimensions may be optionally disabled by
+attaching an 'f' character ("force") to the width or height number.
 
 The image can be losslessly cropped by giving the switch:
 .TP
 .B \-crop WxH+X+Y
 Crop to a rectangular subarea of width W, height H starting at point X,Y.
 .PP
+A complementary lossless-wipe option is provided to discard (gray out) data
+inside a given image region while losslessly preserving what is outside:
+.TP
+.B \-wipe WxH+X+Y
+Wipe (gray out) a rectangular subarea of width W, height H starting at point
+X,Y.
+.PP
+Attaching an 'f' character ("flatten") to the width number will fill
+the region with the average of adjacent blocks, instead of gray out.
+.PP
 Other not-strictly-lossless transformation switches are:
 .TP
 .B \-grayscale
@@ -198,16 +218,17 @@ such as comment blocks:
 .TP
 .B \-copy none
 Copy no extra markers from source file.  This setting suppresses all
-comments and other excess baggage present in the source file.
+comments and other metadata in the source file.
 .TP
 .B \-copy comments
 Copy only comment markers.  This setting copies comments from the source file,
-but discards any other inessential (for image display) data.
+but discards any other metadata.
 .TP
 .B \-copy all
-Copy all extra markers.  This setting preserves miscellaneous markers
+Copy all extra markers.  This setting preserves metadata
 found in the source file, such as JFIF thumbnails, Exif data, and Photoshop
-settings.  In some files these extra markers can be sizable.
+settings.  In some files these extra markers can be sizable.  Note that this
+option will copy thumbnails as-is; they will not be transformed.
 .IP
 The default behavior is
 .BR "\-copy comments" .

jpegtran.c

@@ -1,7 +1,7 @@
 /*
  * jpegtran.c
  *
- * Copyright (C) 1995-2012, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1995-2013, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -66,8 +66,8 @@ usage (void)
   fprintf(stderr, "Switches for modifying the image:\n");
 #if TRANSFORMS_SUPPORTED
   fprintf(stderr, "  -crop WxH+X+Y  Crop to a rectangular subarea\n");
-  fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
   fprintf(stderr, "  -flip [horizontal|vertical]  Mirror image (left-right or top-bottom)\n");
+  fprintf(stderr, "  -grayscale     Reduce to grayscale (omit color data)\n");
   fprintf(stderr, "  -perfect       Fail if there is non-transformable edge blocks\n");
   fprintf(stderr, "  -rotate [90|180|270]         Rotate image (degrees clockwise)\n");
 #endif
@@ -76,6 +76,7 @@ usage (void)
   fprintf(stderr, "  -transpose     Transpose image\n");
   fprintf(stderr, "  -transverse    Transverse transpose image\n");
   fprintf(stderr, "  -trim          Drop non-transformable edge blocks\n");
+  fprintf(stderr, "  -wipe WxH+X+Y  Wipe (gray out) a rectangular subarea\n");
 #endif
   fprintf(stderr, "Switches for advanced users:\n");
 #ifdef C_ARITH_CODING_SUPPORTED
@@ -187,7 +188,8 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 #if TRANSFORMS_SUPPORTED
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+      if (transformoption.crop /* reject multiple crop/wipe requests */ ||
+	  ! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
 	fprintf(stderr, "%s: bogus -crop argument '%s'\n",
 		progname, argv[argn]);
 	exit(EXIT_FAILURE);
@@ -336,6 +338,21 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       /* Trim off any partial edge MCUs that the transform can't handle. */
       transformoption.trim = TRUE;
 
+    } else if (keymatch(arg, "wipe", 1)) {
+#if TRANSFORMS_SUPPORTED
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (transformoption.crop /* reject multiple crop/wipe requests */ ||
+	  ! jtransform_parse_crop_spec(&transformoption, argv[argn])) {
+	fprintf(stderr, "%s: bogus -wipe argument '%s'\n",
+		progname, argv[argn]);
+	exit(EXIT_FAILURE);
+      }
+      select_transform(JXFORM_WIPE);
+#else
+      select_transform(JXFORM_NONE);	/* force an error */
+#endif
+
     } else {
       usage();			/* bogus switch */
     }

jversion.h

@@ -1,7 +1,7 @@
 /*
  * jversion.h
  *
- * Copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding.
+ * Copyright (C) 1991-2018, Thomas G. Lane, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -9,6 +9,6 @@
  */
 
 
-#define JVERSION	"9  13-Jan-2013"
+#define JVERSION	"9c  14-Jan-2018"
 
-#define JCOPYRIGHT	"Copyright (C) 2013, Thomas G. Lane, Guido Vollbeding"
+#define JCOPYRIGHT	"Copyright (C) 2018, Thomas G. Lane, Guido Vollbeding"

libjpeg.pc.in

@@ -0,0 +1,10 @@
+prefix=@prefix@
+exec_prefix=@exec_prefix@
+libdir=@libdir@
+includedir=@includedir@
+
+Name: libjpeg
+Description: Reads and writes JPEG files
+Version: @JPEG_LIB_VERSION@
+Libs: -L${libdir} -ljpeg
+Cflags: -I${includedir}

libjpeg.txt

@@ -95,8 +95,8 @@ use.)  Unsupported ISO options include:
 	* Lossless JPEG
 	* DNL marker
 	* Nonintegral subsampling ratios
-We support both 8- and 12-bit data precision, but this is a compile-time
+We support 8-bit to 12-bit data precision, but this is a compile-time choice
-choice rather than a run-time choice; hence it is difficult to use both
+rather than a run-time choice; hence it is difficult to use different
 precisions in a single application.
 
 By itself, the library handles only interchange JPEG datastreams --- in
@@ -225,7 +225,7 @@ For best results, source data values should have the precision specified by
 BITS_IN_JSAMPLE (normally 8 bits).  For instance, if you choose to compress
 data that's only 6 bits/channel, you should left-justify each value in a
 byte before passing it to the compressor.  If you need to compress data
-that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12.
+that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 9 to 12.
 (See "Library compile-time options", later.)
 
 
@@ -1273,9 +1273,10 @@ Special color spaces
 The JPEG standard itself is "color blind" and doesn't specify any particular
 color space.  It is customary to convert color data to a luminance/chrominance
 color space before compressing, since this permits greater compression.  The
-existing de-facto JPEG file format standards specify YCbCr or grayscale data
+existing JPEG file interchange format standards specify YCbCr or GRAYSCALE
-(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe).  For special
+data (JFIF version 1), GRAYSCALE, RGB, YCbCr, CMYK, or YCCK (Adobe), or BG_RGB
-applications such as multispectral images, other color spaces can be used,
+or BG_YCC (big gamut color spaces, JFIF version 2).  For special applications
+such as multispectral images, other color spaces can be used,
 but it must be understood that such files will be unportable.
 
 The JPEG library can handle the most common colorspace conversions (namely
@@ -1292,22 +1293,25 @@ jpeg_set_colorspace().  Of course you must select a supported transformation.
 jccolor.c currently supports the following transformations:
 	RGB => YCbCr
 	RGB => GRAYSCALE
+	RGB => BG_YCC
 	YCbCr => GRAYSCALE
+	YCbCr => BG_YCC
 	CMYK => YCCK
 plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB,
-YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN.
+BG_RGB => BG_RGB, YCbCr => YCbCr, BG_YCC => BG_YCC, CMYK => CMYK,
+YCCK => YCCK, and UNKNOWN => UNKNOWN.
 
-The de-facto file format standards (JFIF and Adobe) specify APPn markers that
+The file interchange format standards (JFIF and Adobe) specify APPn markers
-indicate the color space of the JPEG file.  It is important to ensure that
+that indicate the color space of the JPEG file.  It is important to ensure
-these are written correctly, or omitted if the JPEG file's color space is not
+that these are written correctly, or omitted if the JPEG file's color space
-one of the ones supported by the de-facto standards.  jpeg_set_colorspace()
+is not one of the ones supported by the interchange standards.
-will set the compression parameters to include or omit the APPn markers
+jpeg_set_colorspace() will set the compression parameters to include or omit
-properly, so long as it is told the truth about the JPEG color space.
+the APPn markers properly, so long as it is told the truth about the JPEG
-For example, if you are writing some random 3-component color space without
+color space.  For example, if you are writing some random 3-component color
-conversion, don't try to fake out the library by setting in_color_space and
+space without conversion, don't try to fake out the library by setting
-jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN.  You may want to write an
+in_color_space and jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN.
-APPn marker of your own devising to identify the colorspace --- see "Special
+You may want to write an APPn marker of your own devising to identify
-markers", below.
+the colorspace --- see "Special markers", below.
 
 When told that the color space is UNKNOWN, the library will default to using
 luminance-quality compression parameters for all color components.  You may
@@ -1325,6 +1329,8 @@ set out_color_space to override this.  Again, you must select a supported
 transformation.  jdcolor.c currently supports
 	YCbCr => RGB
 	YCbCr => GRAYSCALE
+	BG_YCC => RGB
+	BG_YCC => GRAYSCALE
 	RGB => GRAYSCALE
 	GRAYSCALE => RGB
 	YCCK => CMYK
@@ -2585,10 +2591,10 @@ different sizes.  If the image dimensions are not a multiple of the MCU size,
 you must also pad the data correctly (usually, this is done by replicating
 the last column and/or row).  The data must be padded to a multiple of a DCT
 block in each component: that is, each downsampled row must contain a
-multiple of 8 valid samples, and there must be a multiple of 8 sample rows
+multiple of block_size valid samples, and there must be a multiple of
-for each component.  (For applications such as conversion of digital TV
+block_size sample rows for each component.  (For applications such as
-images, the standard image size is usually a multiple of the DCT block size,
+conversion of digital TV images, the standard image size is usually a
-so that no padding need actually be done.)
+multiple of the DCT block size, so that no padding need actually be done.)
 
 The procedure for compression of raw data is basically the same as normal
 compression, except that you call jpeg_write_raw_data() in place of
@@ -2614,22 +2620,22 @@ The scanlines count passed to and returned from jpeg_write_raw_data is
 measured in terms of the component with the largest v_samp_factor.
 
 jpeg_write_raw_data() processes one MCU row per call, which is to say
-v_samp_factor*DCTSIZE sample rows of each component.  The passed num_lines
+v_samp_factor*block_size sample rows of each component.  The passed num_lines
-value must be at least max_v_samp_factor*DCTSIZE, and the return value will
+value must be at least max_v_samp_factor*block_size, and the return value
-be exactly that amount (or possibly some multiple of that amount, in future
+will be exactly that amount (or possibly some multiple of that amount, in
-library versions).  This is true even on the last call at the bottom of the
+future library versions).  This is true even on the last call at the bottom
-image; don't forget to pad your data as necessary.
+of the image; don't forget to pad your data as necessary.
 
 The required dimensions of the supplied data can be computed for each
 component as
-	cinfo->comp_info[i].width_in_blocks*DCTSIZE  samples per row
+	cinfo->comp_info[i].width_in_blocks*block_size  samples per row
-	cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image
+	cinfo->comp_info[i].height_in_blocks*block_size rows in image
 after jpeg_start_compress() has initialized those fields.  If the valid data
 is smaller than this, it must be padded appropriately.  For some sampling
 factors and image sizes, additional dummy DCT blocks are inserted to make
 the image a multiple of the MCU dimensions.  The library creates such dummy
 blocks itself; it does not read them from your supplied data.  Therefore you
-need never pad by more than DCTSIZE samples.  An example may help here.
+need never pad by more than block_size samples.  An example may help here.
 Assume 2h2v downsampling of YCbCr data, that is
 	cinfo->comp_info[0].h_samp_factor = 2		for Y
 	cinfo->comp_info[0].v_samp_factor = 2
@@ -2671,8 +2677,8 @@ Then call jpeg_read_raw_data() in place of jpeg_read_scanlines().  The
 decompression process is otherwise the same as usual.
 
 jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a
-buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is
+buffer of at least max_v_samp_factor*block_size scanlines (scanline counting
-the same as for raw-data compression).  The buffer you pass must be large
+is the same as for raw-data compression).  The buffer you pass must be large
 enough to hold the actual data plus padding to DCT-block boundaries.  As with
 compression, any entirely dummy DCT blocks are not processed so you need not
 allocate space for them, but the total scanline count includes them.  The
@@ -2928,10 +2934,10 @@ This does not count any memory allocated by the application, such as a
 buffer to hold the final output image.
 
 The above figures are valid for 8-bit JPEG data precision and a machine with
-32-bit ints.  For 12-bit JPEG data, double the size of the strip buffers and
+32-bit ints.  For 9-bit to 12-bit JPEG data, double the size of the strip
-quantization pixel buffer.  The "fixed-size" data will be somewhat smaller
+buffers and quantization pixel buffer.  The "fixed-size" data will be
-with 16-bit ints, larger with 64-bit ints.  Also, CMYK or other unusual
+somewhat smaller with 16-bit ints, larger with 64-bit ints.  Also, CMYK
-color spaces will require different amounts of space.
+or other unusual color spaces will require different amounts of space.
 
 The full-image coefficient and pixel buffers, if needed at all, do not
 have to be fully RAM resident; you can have the library use temporary
@@ -2953,27 +2959,34 @@ Library compile-time options
 
 A number of compile-time options are available by modifying jmorecfg.h.
 
-The JPEG standard provides for both the baseline 8-bit DCT process and
+The IJG code currently supports 8-bit to 12-bit sample data precision by
-a 12-bit DCT process.  The IJG code supports 12-bit JPEG if you define
+defining BITS_IN_JSAMPLE as 8, 9, 10, 11, or 12.
-BITS_IN_JSAMPLE as 12 rather than 8.  Note that this causes JSAMPLE to be
+Note that a value larger than 8 causes JSAMPLE to be larger than a char,
-larger than a char, so it affects the surrounding application's image data.
+so it affects the surrounding application's image data.
-The sample applications cjpeg and djpeg can support 12-bit mode only for PPM
+The sample applications cjpeg and djpeg can support deeper than 8-bit data
-and GIF file formats; you must disable the other file formats to compile a
+only for PPM and GIF file formats; you must disable the other file formats
-12-bit cjpeg or djpeg.  (install.txt has more information about that.)
+to compile a 9-bit to 12-bit cjpeg or djpeg.  (install.txt has more
-At present, a 12-bit library can handle *only* 12-bit images, not both
+information about that.)
-precisions.  (If you need to include both 8- and 12-bit libraries in a single
+Run-time selection and conversion of data precision are currently not
-application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES
+supported and may be added later.
-for just one of the copies.  You'd have to access the 8-bit and 12-bit copies
+Exception:  The transcoding part (jpegtran) supports all settings in a
-from separate application source files.  This is untested ... if you try it,
+single instance, since it operates on the level of DCT coefficients and
-we'd like to hear whether it works!)
+not sample values.
+(If you need to include an 8-bit library and a 9-bit to 12-bit library for
+compression or decompression in a single application, you could probably do
+it by defining NEED_SHORT_EXTERNAL_NAMES for just one of the copies.  You'd
+have to access the 8-bit and the 9-bit to 12-bit copies from separate
+application source files.  This is untested ... if you try it, we'd like to
+hear whether it works!)
 
-Note that a 12-bit library always compresses in Huffman optimization mode,
+Note that the standard Huffman tables are only valid for 8-bit data precision.
-in order to generate valid Huffman tables.  This is necessary because our
+If you selected more than 8-bit data precision, cjpeg uses arithmetic coding
-default Huffman tables only cover 8-bit data.  If you need to output 12-bit
+by default.  The Huffman encoder normally uses entropy optimization to
-files in one pass, you'll have to supply suitable default Huffman tables.
+compute usable tables for higher precision.  Otherwise, you'll have to
-You may also want to supply your own DCT quantization tables; the existing
+supply different default Huffman tables.  You may also want to supply your
-quality-scaling code has been developed for 8-bit use, and probably doesn't
+own DCT quantization tables; the existing quality-scaling code has been
-generate especially good tables for 12-bit.
+developed for 8-bit use, and probably doesn't generate especially good tables
+for 9-bit to 12-bit.
 
 The maximum number of components (color channels) in the image is determined
 by MAX_COMPONENTS.  The JPEG standard allows up to 255 components, but we

makeasln.v15

@@ -0,0 +1,33 @@
+<EFBFBD><EFBFBD><EFBFBD>
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual C++ Express 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcxproj", "{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcxproj", "{11043137-B453-4DFA-9010-4D2B9DC1545C}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcxproj", "{025BAC50-51B5-4FFE-BC47-3F920BB4047E}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcxproj", "{C81513DB-78DC-46BC-BC98-82E745203976}"
+EndProject
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcxproj", "{B57065D4-DDDA-4668-BAF5-2D49270C973C}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Release|Win32 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.ActiveCfg = Release|Win32
+		{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}.Release|Win32.Build.0 = Release|Win32
+		{11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.ActiveCfg = Release|Win32
+		{11043137-B453-4DFA-9010-4D2B9DC1545C}.Release|Win32.Build.0 = Release|Win32
+		{025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.ActiveCfg = Release|Win32
+		{025BAC50-51B5-4FFE-BC47-3F920BB4047E}.Release|Win32.Build.0 = Release|Win32
+		{C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.ActiveCfg = Release|Win32
+		{C81513DB-78DC-46BC-BC98-82E745203976}.Release|Win32.Build.0 = Release|Win32
+		{B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.ActiveCfg = Release|Win32
+		{B57065D4-DDDA-4668-BAF5-2D49270C973C}.Release|Win32.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

makecfil.v15

@@ -0,0 +1,69 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="cdjpeg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="cjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdbmp.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdgif.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdppm.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdrle.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdswitch.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdtarga.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

makecvcx.v15

@@ -0,0 +1,78 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{2E7FAAD9-2F58-4BDE-81F2-1D6D3FB8BF57}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>cjpeg</RootNamespace>
+    <WindowsTargetPlatformVersion>10.0.16299.0</WindowsTargetPlatformVersion>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+    <PlatformToolset>v141</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <AdditionalDependencies>Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h" />
+    <ClInclude Include="cdjpeg.h" />
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c" />
+    <ClCompile Include="cjpeg.c" />
+    <ClCompile Include="rdbmp.c" />
+    <ClCompile Include="rdgif.c" />
+    <ClCompile Include="rdppm.c" />
+    <ClCompile Include="rdrle.c" />
+    <ClCompile Include="rdswitch.c" />
+    <ClCompile Include="rdtarga.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

makedfil.v15

@@ -0,0 +1,69 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="cdjpeg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="djpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdcolmap.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrbmp.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrgif.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrppm.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrrle.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="wrtarga.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

makedvcx.v15

@@ -0,0 +1,78 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{11043137-B453-4DFA-9010-4D2B9DC1545C}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>djpeg</RootNamespace>
+    <WindowsTargetPlatformVersion>10.0.16299.0</WindowsTargetPlatformVersion>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+    <PlatformToolset>v141</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <AdditionalDependencies>Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h" />
+    <ClInclude Include="cdjpeg.h" />
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c" />
+    <ClCompile Include="djpeg.c" />
+    <ClCompile Include="rdcolmap.c" />
+    <ClCompile Include="wrbmp.c" />
+    <ClCompile Include="wrgif.c" />
+    <ClCompile Include="wrppm.c" />
+    <ClCompile Include="wrrle.c" />
+    <ClCompile Include="wrtarga.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

makefile.ansi

@@ -60,23 +60,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.b32

@@ -0,0 +1,243 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is suitable for Borland C on MS-DOS.
+# It works with Borland C++ 32-bit for DOS, revision 5.0 or later.
+# Thanks to Tom Wright and Ge' Weijers (original DOS) and
+# Joe Slater for adding 32-bit additions (needed for Borland
+# revision 5.5).
+
+# Read installation instructions before saying "make" !!
+
+# The name of your C compiler:
+CC= bcc32
+
+# You may need to adjust these cc options:
+CFLAGS= -O2 -w-par -w-stu -w-ccc -w-rch -w-aus
+# -w-par suppresses warnings about unused function parameters
+# -w-stu suppresses warnings about incomplete structures
+# -w-ccc suppresses warnings about compile-time-constant conditions
+# -w-rch suppresses warnings about unreachable code
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Link-time cc options:
+LDFLAGS=
+# -lc case-significant link
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.
+# SYSDEPMEMLIB must list the same files with "+" signs for the librarian.
+SYSDEPMEM= jmemnobs.obj
+SYSDEPMEMLIB= +jmemnobs.obj
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \
+        jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \
+        jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \
+        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
+# decompression library object files
+DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \
+        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \
+        jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \
+        jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \
+        jdmerge.obj
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
+        rdswitch.obj cdjpeg.obj
+DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
+        rdcolmap.obj cdjpeg.obj
+TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
+
+
+all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+
+libjpeg.lib: $(LIBOBJECTS)
+        - del libjpeg.lib
+        tlib libjpeg.lib /E /C @&&|
++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj &
++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj &
++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj &
++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj &
++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj &
++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj &
++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj &
++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj &
++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj &
+$(SYSDEPMEMLIB)
+|
+
+cjpeg.exe: $(COBJECTS) libjpeg.lib
+        $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib
+
+djpeg.exe: $(DOBJECTS) libjpeg.lib
+        $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib
+
+jpegtran.exe: $(TROBJECTS) libjpeg.lib
+        $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib
+
+rdjpgcom.exe: rdjpgcom.c
+        $(CC) $(CFLAGS) rdjpgcom.c
+
+wrjpgcom.exe: wrjpgcom.c
+        $(CC) $(CFLAGS) wrjpgcom.c
+
+# This "{}" syntax allows Borland Make to "batch" source files.
+# In this way, each run of the compiler can build many modules.
+.c.obj:
+        $(CC) $(CFLAGS) -c{ $<}
+
+jconfig.h: jconfig.txt
+        echo You must prepare a system-dependent jconfig.h file.
+        echo Please read the installation directions in install.txt.
+        exit 1
+
+clean:
+        - del *.obj
+        - del libjpeg.lib
+        - del cjpeg.exe
+        - del djpeg.exe
+        - del jpegtran.exe
+        - del rdjpgcom.exe
+        - del wrjpgcom.exe
+        - del testout*.*
+
+test: cjpeg.exe djpeg.exe jpegtran.exe
+        - del testout*.*
+        djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+        djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+        cjpeg -dct int -outfile testout.jpg  testimg.ppm
+        djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+        cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+        jpegtran -outfile testoutt.jpg testprog.jpg
+        echo n > n.tmp
+        comp testimg.ppm testout.ppm < n.tmp
+        comp testimg.bmp testout.bmp < n.tmp
+        comp testimg.jpg testout.jpg < n.tmp
+        comp testimg.ppm testoutp.ppm < n.tmp
+        comp testimgp.jpg testoutp.jpg < n.tmp
+        comp testorig.jpg testoutt.jpg < n.tmp
+        del n.tmp
+
+
+jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+jmemdosa.obj: jmemdosa.asm
+        tasm /mx jmemdosa.asm

makefile.bcc

@@ -87,23 +87,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.dj

@@ -60,23 +60,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.manx

@@ -61,23 +61,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.mc6

@@ -58,23 +58,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.mms

@@ -47,23 +47,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.sas

@@ -69,23 +69,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.unix

@@ -64,23 +64,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \

makefile.vc

@@ -57,23 +57,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
@@ -154,22 +154,22 @@ setup-vc6:
 	ren makewdep.vc6 wrjpgcom.dep
 	ren makewdsp.vc6 wrjpgcom.dsp
 
-setup-v10:
+setup-v15:
 	ren jconfig.vc jconfig.h
-	ren makejsln.v10 jpeg.sln
+	ren makejsln.v15 jpeg.sln
-	ren makeasln.v10 apps.sln
+	ren makeasln.v15 apps.sln
-	ren makejvcx.v10 jpeg.vcxproj
+	ren makejvcx.v15 jpeg.vcxproj
-	ren makejfil.v10 jpeg.vcxproj.filters
+	ren makejfil.v15 jpeg.vcxproj.filters
-	ren makecvcx.v10 cjpeg.vcxproj
+	ren makecvcx.v15 cjpeg.vcxproj
-	ren makecfil.v10 cjpeg.vcxproj.filters
+	ren makecfil.v15 cjpeg.vcxproj.filters
-	ren makedvcx.v10 djpeg.vcxproj
+	ren makedvcx.v15 djpeg.vcxproj
-	ren makedfil.v10 djpeg.vcxproj.filters
+	ren makedfil.v15 djpeg.vcxproj.filters
-	ren maketvcx.v10 jpegtran.vcxproj
+	ren maketvcx.v15 jpegtran.vcxproj
-	ren maketfil.v10 jpegtran.vcxproj.filters
+	ren maketfil.v15 jpegtran.vcxproj.filters
-	ren makervcx.v10 rdjpgcom.vcxproj
+	ren makervcx.v15 rdjpgcom.vcxproj
-	ren makerfil.v10 rdjpgcom.vcxproj.filters
+	ren makerfil.v15 rdjpgcom.vcxproj.filters
-	ren makewvcx.v10 wrjpgcom.vcxproj
+	ren makewvcx.v15 wrjpgcom.vcxproj
-	ren makewfil.v10 wrjpgcom.vcxproj.filters
+	ren makewfil.v15 wrjpgcom.vcxproj.filters
 
 test:
 	IF EXIST testout* $(RM) testout*

makefile.vs

@@ -0,0 +1,273 @@
+# Makefile for Independent JPEG Group's software
+
+# This makefile is for Microsoft Visual C++ on Windows NT (and 95?).
+# It builds the IJG library as a statically linkable library (.LIB),
+# and builds the sample applications as console-mode apps.
+# Thanks to Xingong Chang, Raymond Everly and others.
+
+# Read installation instructions before saying "nmake" !!
+# To build an optimized library without debug info, say "nmake nodebug=1".
+
+# Pull in standard variable definitions
+#!include <win32.mak>
+
+# You may want to adjust these compiler options:
+CFLAGS= $(cflags) $(cdebug) $(cvars) -I.
+# Generally, we recommend defining any configuration symbols in jconfig.h,
+# NOT via -D switches here.
+
+# Link-time options:
+LDFLAGS= $(ldebug) $(conlflags)
+
+# To link any special libraries, add the necessary commands here.
+LDLIBS= $(conlibs)
+
+# Put here the object file name for the correct system-dependent memory
+# manager file.  For NT we suggest jmemnobs.obj, which expects the OS to
+# provide adequate virtual memory.
+SYSDEPMEM= jmemnobs.obj
+
+# miscellaneous OS-dependent stuff
+# file deletion command
+RM= del
+
+# End of configurable options.
+
+
+# source files: JPEG library proper
+LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c
+# memmgr back ends: compile only one of these into a working library
+SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
+# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom
+APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \
+        rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \
+        rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c
+SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES)
+# files included by source files
+INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \
+        jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h
+# documentation, test, and support files
+DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \
+        wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \
+        coderules.txt filelist.txt change.log
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \
+        $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES)
+# library object files common to compression and decompression
+COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM)
+# compression library object files
+CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \
+        jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \
+        jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \
+        jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj
+# decompression library object files
+DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \
+        jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \
+        jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \
+        jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \
+        jdmerge.obj
+# These objectfiles are included in libjpeg.lib
+LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS)
+# object files for sample applications (excluding library files)
+COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \
+        rdswitch.obj cdjpeg.obj
+DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \
+        rdcolmap.obj cdjpeg.obj
+TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj
+
+# Template command for compiling .c to .obj
+.c.obj:
+	$(cc) $(CFLAGS) $*.c
+
+
+all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe
+
+libjpeg.lib: $(LIBOBJECTS)
+	$(RM) libjpeg.lib
+	lib -out:libjpeg.lib  $(LIBOBJECTS)
+
+cjpeg.exe: $(COBJECTS) libjpeg.lib
+	$(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS)
+
+djpeg.exe: $(DOBJECTS) libjpeg.lib
+	$(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS)
+
+jpegtran.exe: $(TROBJECTS) libjpeg.lib
+	$(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS)
+
+rdjpgcom.exe: rdjpgcom.obj
+	$(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS)
+
+wrjpgcom.exe: wrjpgcom.obj
+	$(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS)
+
+
+clean:
+	$(RM) *.obj *.exe libjpeg.lib
+	$(RM) testout*
+
+setup-vc6:
+	ren jconfig.vc jconfig.h
+	ren makejdsw.vc6 jpeg.dsw
+	ren makeadsw.vc6 apps.dsw
+	ren makejmak.vc6 jpeg.mak
+	ren makejdep.vc6 jpeg.dep
+	ren makejdsp.vc6 jpeg.dsp
+	ren makecmak.vc6 cjpeg.mak
+	ren makecdep.vc6 cjpeg.dep
+	ren makecdsp.vc6 cjpeg.dsp
+	ren makedmak.vc6 djpeg.mak
+	ren makeddep.vc6 djpeg.dep
+	ren makeddsp.vc6 djpeg.dsp
+	ren maketmak.vc6 jpegtran.mak
+	ren maketdep.vc6 jpegtran.dep
+	ren maketdsp.vc6 jpegtran.dsp
+	ren makermak.vc6 rdjpgcom.mak
+	ren makerdep.vc6 rdjpgcom.dep
+	ren makerdsp.vc6 rdjpgcom.dsp
+	ren makewmak.vc6 wrjpgcom.mak
+	ren makewdep.vc6 wrjpgcom.dep
+	ren makewdsp.vc6 wrjpgcom.dsp
+
+setup-v15:
+	ren jconfig.vc jconfig.h
+	ren makejsln.v15 jpeg.sln
+	ren makeasln.v15 apps.sln
+	ren makejvcx.v15 jpeg.vcxproj
+	ren makejfil.v15 jpeg.vcxproj.filters
+	ren makecvcx.v15 cjpeg.vcxproj
+	ren makecfil.v15 cjpeg.vcxproj.filters
+	ren makedvcx.v15 djpeg.vcxproj
+	ren makedfil.v15 djpeg.vcxproj.filters
+	ren maketvcx.v15 jpegtran.vcxproj
+	ren maketfil.v15 jpegtran.vcxproj.filters
+	ren makervcx.v15 rdjpgcom.vcxproj
+	ren makerfil.v15 rdjpgcom.vcxproj.filters
+	ren makewvcx.v15 wrjpgcom.vcxproj
+	ren makewfil.v15 wrjpgcom.vcxproj.filters
+
+test:
+	IF EXIST testout* $(RM) testout*
+	.\djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	.\djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	.\cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	.\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	.\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	.\jpegtran -outfile testoutt.jpg testprog.jpg
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+
+test-build:
+	IF EXIST testout* $(RM) testout*
+	.\djpeg\Release\djpeg -dct int -ppm -outfile testout.ppm  testorig.jpg
+	.\djpeg\Release\djpeg -dct int -bmp -colors 256 -outfile testout.bmp  testorig.jpg
+	.\cjpeg\Release\cjpeg -dct int -outfile testout.jpg  testimg.ppm
+	.\djpeg\Release\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg
+	.\cjpeg\Release\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm
+	.\jpegtran\Release\jpegtran -outfile testoutt.jpg testprog.jpg
+	fc /b testimg.ppm testout.ppm
+	fc /b testimg.bmp testout.bmp
+	fc /b testimg.jpg testout.jpg
+	fc /b testimg.ppm testoutp.ppm
+	fc /b testimgp.jpg testoutp.jpg
+	fc /b testorig.jpg testoutt.jpg
+
+
+jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h
+jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h
+jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h
+jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h
+jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h
+cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h
+jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h
+rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h
+wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h
+cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h
+rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h
+wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h

makefile.wat

@@ -59,23 +59,23 @@ INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h &
 DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 &
         wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt &
         coderules.txt filelist.txt change.log
-MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc &
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 &
-        makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 &
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc &
-        makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 &
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 &
-        makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 &
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 &
-        maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 &
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 &
-        makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.v10 &
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 &
-        makeasln.v10 makejvcx.v10 makejfil.v10 makecvcx.v10 makecfil.v10 &
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 &
-        makedvcx.v10 makedfil.v10 maketvcx.v10 maketfil.v10 makervcx.v10 &
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 &
-        makerfil.v10 makewvcx.v10 makewfil.v10 makeproj.mac makcjpeg.st &
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 &
-        makdjpeg.st makljpeg.st maktjpeg.st makefile.manx makefile.sas &
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st &
-        makefile.mms makefile.vms makvms.opt
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
 CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat &
         jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas &
         jconfig.vms
 CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp &
         missing ar-lib
-OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
 TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg &
         testimgp.jpg
 DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) &

makejfil.v15

@@ -0,0 +1,186 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jdct.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmemsys.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpegint.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="jaricom.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcapimin.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcapistd.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcarith.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jccoefct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jccolor.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcdctmgr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jchuff.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcinit.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcmainct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcmarker.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcmaster.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcomapi.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcparam.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcprepct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jcsample.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jctrans.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdapimin.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdapistd.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdarith.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdatadst.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdatasrc.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdcoefct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdcolor.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jddctmgr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdhuff.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdinput.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmainct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmarker.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmaster.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdmerge.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdpostct.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdsample.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jdtrans.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jerror.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jfdctflt.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jfdctfst.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jfdctint.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jidctflt.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jidctfst.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jidctint.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jmemmgr.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jmemnobs.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jquant1.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jquant2.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jutils.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

makejsln.v15

@@ -0,0 +1,17 @@
+<EFBFBD><EFBFBD><EFBFBD>
+Microsoft Visual Studio Solution File, Format Version 11.00
+# Visual C++ Express 2010
+Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg", "jpeg.vcxproj", "{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}"
+EndProject
+Global
+	GlobalSection(SolutionConfigurationPlatforms) = preSolution
+		Release|Win32 = Release|Win32
+	EndGlobalSection
+	GlobalSection(ProjectConfigurationPlatforms) = postSolution
+		{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.ActiveCfg = Release|Win32
+		{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}.Release|Win32.Build.0 = Release|Win32
+	EndGlobalSection
+	GlobalSection(SolutionProperties) = preSolution
+		HideSolutionNode = FALSE
+	EndGlobalSection
+EndGlobal

makejvcx.v15

@@ -0,0 +1,111 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jdct.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmemsys.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpegint.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="jaricom.c" />
+    <ClCompile Include="jcapimin.c" />
+    <ClCompile Include="jcapistd.c" />
+    <ClCompile Include="jcarith.c" />
+    <ClCompile Include="jccoefct.c" />
+    <ClCompile Include="jccolor.c" />
+    <ClCompile Include="jcdctmgr.c" />
+    <ClCompile Include="jchuff.c" />
+    <ClCompile Include="jcinit.c" />
+    <ClCompile Include="jcmainct.c" />
+    <ClCompile Include="jcmarker.c" />
+    <ClCompile Include="jcmaster.c" />
+    <ClCompile Include="jcomapi.c" />
+    <ClCompile Include="jcparam.c" />
+    <ClCompile Include="jcprepct.c" />
+    <ClCompile Include="jcsample.c" />
+    <ClCompile Include="jctrans.c" />
+    <ClCompile Include="jdapimin.c" />
+    <ClCompile Include="jdapistd.c" />
+    <ClCompile Include="jdarith.c" />
+    <ClCompile Include="jdatadst.c" />
+    <ClCompile Include="jdatasrc.c" />
+    <ClCompile Include="jdcoefct.c" />
+    <ClCompile Include="jdcolor.c" />
+    <ClCompile Include="jddctmgr.c" />
+    <ClCompile Include="jdhuff.c" />
+    <ClCompile Include="jdinput.c" />
+    <ClCompile Include="jdmainct.c" />
+    <ClCompile Include="jdmarker.c" />
+    <ClCompile Include="jdmaster.c" />
+    <ClCompile Include="jdmerge.c" />
+    <ClCompile Include="jdpostct.c" />
+    <ClCompile Include="jdsample.c" />
+    <ClCompile Include="jdtrans.c" />
+    <ClCompile Include="jerror.c" />
+    <ClCompile Include="jfdctflt.c" />
+    <ClCompile Include="jfdctfst.c" />
+    <ClCompile Include="jfdctint.c" />
+    <ClCompile Include="jidctflt.c" />
+    <ClCompile Include="jidctfst.c" />
+    <ClCompile Include="jidctint.c" />
+    <ClCompile Include="jmemmgr.c" />
+    <ClCompile Include="jmemnobs.c" />
+    <ClCompile Include="jquant1.c" />
+    <ClCompile Include="jquant2.c" />
+    <ClCompile Include="jutils.c" />
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{019DBD2A-273D-4BA4-BF86-B5EFE2ED76B1}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>jpeg</RootNamespace>
+    <WindowsTargetPlatformVersion>10.0.16299.0</WindowsTargetPlatformVersion>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>StaticLibrary</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+    <PlatformToolset>v141</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup />
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_LIB;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+    </ClCompile>
+    <Link>
+      <SubSystem>Windows</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+  </ItemDefinitionGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

makerfil.v15

@@ -0,0 +1,30 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="rdjpgcom.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

makervcx.v15

@@ -0,0 +1,64 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{C81513DB-78DC-46BC-BC98-82E745203976}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>rdjpgcom</RootNamespace>
+    <WindowsTargetPlatformVersion>10.0.16299.0</WindowsTargetPlatformVersion>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+    <PlatformToolset>v141</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jinclude.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="rdjpgcom.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

maketfil.v15

@@ -0,0 +1,63 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="cdjpeg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jerror.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jmorecfg.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpegint.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jpeglib.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jversion.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="transupp.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="jpegtran.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="rdswitch.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+    <ClCompile Include="transupp.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

maketvcx.v15

@@ -0,0 +1,76 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{025BAC50-51B5-4FFE-BC47-3F920BB4047E}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>jpegtran</RootNamespace>
+    <WindowsTargetPlatformVersion>10.0.16299.0</WindowsTargetPlatformVersion>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+    <PlatformToolset>v141</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+      <AdditionalDependencies>Release\jpeg.lib;kernel32.lib;user32.lib;gdi32.lib;winspool.lib;comdlg32.lib;advapi32.lib;shell32.lib;ole32.lib;oleaut32.lib;uuid.lib;odbc32.lib;odbccp32.lib;%(AdditionalDependencies)</AdditionalDependencies>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="cderror.h" />
+    <ClInclude Include="cdjpeg.h" />
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jerror.h" />
+    <ClInclude Include="jinclude.h" />
+    <ClInclude Include="jmorecfg.h" />
+    <ClInclude Include="jpegint.h" />
+    <ClInclude Include="jpeglib.h" />
+    <ClInclude Include="jversion.h" />
+    <ClInclude Include="transupp.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="cdjpeg.c" />
+    <ClCompile Include="jpegtran.c" />
+    <ClCompile Include="rdswitch.c" />
+    <ClCompile Include="transupp.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

makewfil.v15

@@ -0,0 +1,30 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup>
+    <Filter Include="Source Files">
+      <UniqueIdentifier>{4FC737F1-C7A5-4376-A066-2A32D752A2FF}</UniqueIdentifier>
+      <Extensions>cpp;c;cc;cxx;def;odl;idl;hpj;bat;asm;asmx</Extensions>
+    </Filter>
+    <Filter Include="Header Files">
+      <UniqueIdentifier>{93995380-89BD-4b04-88EB-625FBE52EBFB}</UniqueIdentifier>
+      <Extensions>h;hpp;hxx;hm;inl;inc;xsd</Extensions>
+    </Filter>
+    <Filter Include="Resource Files">
+      <UniqueIdentifier>{67DA6AB6-F800-4c08-8B7A-83BB121AAD01}</UniqueIdentifier>
+      <Extensions>rc;ico;cur;bmp;dlg;rc2;rct;bin;rgs;gif;jpg;jpeg;jpe;resx;tiff;tif;png;wav;mfcribbon-ms</Extensions>
+    </Filter>
+  </ItemGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+    <ClInclude Include="jinclude.h">
+      <Filter>Header Files</Filter>
+    </ClInclude>
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="wrjpgcom.c">
+      <Filter>Source Files</Filter>
+    </ClCompile>
+  </ItemGroup>
+</Project>

makewvcx.v15

@@ -0,0 +1,64 @@
+<EFBFBD><EFBFBD><EFBFBD><?xml version="1.0" encoding="utf-8"?>
+<Project DefaultTargets="Build" ToolsVersion="15.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
+  <ItemGroup Label="ProjectConfigurations">
+    <ProjectConfiguration Include="Release|Win32">
+      <Configuration>Release</Configuration>
+      <Platform>Win32</Platform>
+    </ProjectConfiguration>
+  </ItemGroup>
+  <PropertyGroup Label="Globals">
+    <ProjectGuid>{B57065D4-DDDA-4668-BAF5-2D49270C973C}</ProjectGuid>
+    <Keyword>Win32Proj</Keyword>
+    <RootNamespace>wrjpgcom</RootNamespace>
+    <WindowsTargetPlatformVersion>10.0.16299.0</WindowsTargetPlatformVersion>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.Default.props" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'" Label="Configuration">
+    <ConfigurationType>Application</ConfigurationType>
+    <UseDebugLibraries>false</UseDebugLibraries>
+    <WholeProgramOptimization>true</WholeProgramOptimization>
+    <CharacterSet>Unicode</CharacterSet>
+    <PlatformToolset>v141</PlatformToolset>
+  </PropertyGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.props" />
+  <ImportGroup Label="ExtensionSettings">
+  </ImportGroup>
+  <ImportGroup Label="PropertySheets" Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <Import Project="$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props" Condition="exists('$(UserRootDir)\Microsoft.Cpp.$(Platform).user.props')" Label="LocalAppDataPlatform" />
+  </ImportGroup>
+  <PropertyGroup Label="UserMacros" />
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <LinkIncremental>false</LinkIncremental>
+    <OutDir>$(ProjectName)\$(Configuration)\</OutDir>
+    <IntDir>$(ProjectName)\$(Configuration)\</IntDir>
+  </PropertyGroup>
+  <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
+    <ClCompile>
+      <WarningLevel>Level3</WarningLevel>
+      <PrecompiledHeader>NotUsing</PrecompiledHeader>
+      <Optimization>Full</Optimization>
+      <FunctionLevelLinking>true</FunctionLevelLinking>
+      <IntrinsicFunctions>false</IntrinsicFunctions>
+      <PreprocessorDefinitions>WIN32;NDEBUG;_CONSOLE;_CRT_SECURE_NO_WARNINGS</PreprocessorDefinitions>
+      <OmitFramePointers>true</OmitFramePointers>
+      <EnableFiberSafeOptimizations>true</EnableFiberSafeOptimizations>
+      <DisableSpecificWarnings>4996</DisableSpecificWarnings>
+    </ClCompile>
+    <Link>
+      <SubSystem>Console</SubSystem>
+      <GenerateDebugInformation>true</GenerateDebugInformation>
+      <EnableCOMDATFolding>true</EnableCOMDATFolding>
+      <OptimizeReferences>true</OptimizeReferences>
+    </Link>
+  </ItemDefinitionGroup>
+  <ItemGroup>
+    <ClInclude Include="jconfig.h" />
+    <ClInclude Include="jinclude.h" />
+  </ItemGroup>
+  <ItemGroup>
+    <ClCompile Include="wrjpgcom.c" />
+  </ItemGroup>
+  <Import Project="$(VCTargetsPath)\Microsoft.Cpp.targets" />
+  <ImportGroup Label="ExtensionTargets">
+  </ImportGroup>
+</Project>

missing

@@ -1,9 +1,9 @@
 #! /bin/sh
 # Common wrapper for a few potentially missing GNU programs.
 
-scriptversion=2012-06-26.16; # UTC
+scriptversion=2016-01-11.22; # UTC
 
-# Copyright (C) 1996-2013 Free Software Foundation, Inc.
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
 # Originally written by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
 
 # This program is free software; you can redistribute it and/or modify
@@ -160,7 +160,7 @@ give_advice ()
       ;;
    autom4te*)
       echo "You might have modified some maintainer files that require"
-      echo "the 'automa4te' program to be rebuilt."
+      echo "the 'autom4te' program to be rebuilt."
       program_details 'autom4te'
       ;;
     bison*|yacc*)
@@ -210,6 +210,6 @@ exit $st
 # eval: (add-hook 'write-file-hooks 'time-stamp)
 # time-stamp-start: "scriptversion="
 # time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-time-zone: "UTC"
+# time-stamp-time-zone: "UTC0"
 # time-stamp-end: "; # UTC"
 # End:

rdbmp.c

@@ -2,13 +2,13 @@
  * rdbmp.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Modified 2009-2010 by Guido Vollbeding.
+ * Modified 2009-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains routines to read input images in Microsoft "BMP"
  * format (MS Windows 3.x, OS/2 1.x, and OS/2 2.x flavors).
- * Currently, only 8-bit and 24-bit images are supported, not 1-bit or
+ * Currently, only 8-, 24-, and 32-bit images are supported, not 1-bit or
  * 4-bit (feeding such low-depth images into JPEG would be silly anyway).
  * Also, we don't support RLE-compressed files.
  *
@@ -61,7 +61,8 @@ typedef struct _bmp_source_struct {
   JDIMENSION source_row;	/* Current source row number */
   JDIMENSION row_width;		/* Physical width of scanlines in file */
 
-  int bits_per_pixel;		/* remembers 8- or 24-bit format */
+  int bits_per_pixel;		/* remembers 8-, 24-, or 32-bit format */
+  int cmap_length;		/* colormap length */
 } bmp_source_struct;
 
 
@@ -121,11 +122,12 @@ get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
 /* This version is for reading 8-bit colormap indexes */
 {
   bmp_source_ptr source = (bmp_source_ptr) sinfo;
-  register JSAMPARRAY colormap = source->colormap;
   JSAMPARRAY image_ptr;
-  register int t;
   register JSAMPROW inptr, outptr;
+  register JSAMPARRAY colormap;
   register JDIMENSION col;
+  register int t;
+  int cmaplen;
 
   /* Fetch next row from virtual array */
   source->source_row--;
@@ -136,8 +138,12 @@ get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   /* Expand the colormap indexes to real data */
   inptr = image_ptr[0];
   outptr = source->pub.buffer[0];
+  colormap = source->colormap;
+  cmaplen = source->cmap_length;
   for (col = cinfo->image_width; col > 0; col--) {
     t = GETJSAMPLE(*inptr++);
+    if (t >= cmaplen)
+      ERREXIT(cinfo, JERR_BMP_OUTOFRANGE);
     *outptr++ = colormap[0][t];	/* can omit GETJSAMPLE() safely */
     *outptr++ = colormap[1][t];
     *outptr++ = colormap[2][t];
@@ -192,6 +198,7 @@ get_32bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   image_ptr = (*cinfo->mem->access_virt_sarray)
     ((j_common_ptr) cinfo, source->whole_image,
      source->source_row, (JDIMENSION) 1, FALSE);
+
   /* Transfer data.  Note source values are in BGR order
    * (even though Microsoft's own documents say the opposite).
    */
@@ -301,7 +308,7 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     ERREXIT(cinfo, JERR_INPUT_EOF);
   if (GET_2B(bmpfileheader,0) != 0x4D42) /* 'BM' */
     ERREXIT(cinfo, JERR_BMP_NOT);
-  bfOffBits = (INT32) GET_4B(bmpfileheader,10);
+  bfOffBits = GET_4B(bmpfileheader,10);
   /* We ignore the remaining fileheader fields */
 
   /* The infoheader might be 12 bytes (OS/2 1.x), 40 bytes (Windows),
@@ -309,7 +316,7 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
    */
   if (! ReadOK(source->pub.input_file, bmpinfoheader, 4))
     ERREXIT(cinfo, JERR_INPUT_EOF);
-  headerSize = (INT32) GET_4B(bmpinfoheader,0);
+  headerSize = GET_4B(bmpinfoheader,0);
   if (headerSize < 12 || headerSize > 64)
     ERREXIT(cinfo, JERR_BMP_BADHEADER);
   if (! ReadOK(source->pub.input_file, bmpinfoheader+4, headerSize-4))
@@ -329,7 +336,9 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
       TRACEMS2(cinfo, 1, JTRC_BMP_OS2_MAPPED, (int) biWidth, (int) biHeight);
       break;
     case 24:			/* RGB image */
-      TRACEMS2(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight);
+    case 32:			/* RGB image + Alpha channel */
+      TRACEMS3(cinfo, 1, JTRC_BMP_OS2, (int) biWidth, (int) biHeight,
+	       source->bits_per_pixel);
       break;
     default:
       ERREXIT(cinfo, JERR_BMP_BADDEPTH);
@@ -356,10 +365,9 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
       TRACEMS2(cinfo, 1, JTRC_BMP_MAPPED, (int) biWidth, (int) biHeight);
       break;
     case 24:			/* RGB image */
-      TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
-      break;
     case 32:			/* RGB image + Alpha channel */
-      TRACEMS2(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight);
+      TRACEMS3(cinfo, 1, JTRC_BMP, (int) biWidth, (int) biHeight,
+	       source->bits_per_pixel);
       break;
     default:
       ERREXIT(cinfo, JERR_BMP_BADDEPTH);
@@ -377,13 +385,14 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     break;
   default:
     ERREXIT(cinfo, JERR_BMP_BADHEADER);
-    return;
+    return;	/* avoid compiler warnings for uninitialized variables */
   }
 
-  if (biWidth <= 0 || biHeight <= 0)
-    ERREXIT(cinfo, JERR_BMP_EMPTY);
   if (biPlanes != 1)
     ERREXIT(cinfo, JERR_BMP_BADPLANES);
+  /* Sanity check for buffer allocation below */
+  if (biWidth <= 0 || biHeight <= 0 || (biWidth >> 24) || (biHeight >> 24))
+    ERREXIT(cinfo, JERR_BMP_OUTOFRANGE);
 
   /* Compute distance to bitmap data --- will adjust for colormap below */
   bPad = bfOffBits - (headerSize + 14);
@@ -398,6 +407,7 @@ start_input_bmp (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     source->colormap = (*cinfo->mem->alloc_sarray)
       ((j_common_ptr) cinfo, JPOOL_IMAGE,
        (JDIMENSION) biClrUsed, (JDIMENSION) 3);
+    source->cmap_length = (int) biClrUsed;
     /* and read it from the file */
     read_colormap(source, (int) biClrUsed, mapentrysize);
     /* account for size of colormap */
@@ -474,7 +484,7 @@ jinit_read_bmp (j_compress_ptr cinfo)
   source->pub.start_input = start_input_bmp;
   source->pub.finish_input = finish_input_bmp;
 
-  return (cjpeg_source_ptr) source;
+  return &source->pub;
 }
 
 #endif /* BMP_SUPPORTED */

rdjpgcom.1

@@ -1,4 +1,4 @@
-.TH RDJPGCOM 1 "02 April 2009"
+.TH RDJPGCOM 1 "13 September 2013"
 .SH NAME
 rdjpgcom \- display text comments from a JPEG file
 .SH SYNOPSIS

rdppm.c

@@ -2,7 +2,7 @@
  * rdppm.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Modified 2009 by Bill Allombert, Guido Vollbeding.
+ * Modified 2009-2017 by Bill Allombert, Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -76,6 +76,7 @@ typedef struct {
   JSAMPROW pixrow;		/* FAR pointer to same */
   size_t buffer_width;		/* width of I/O buffer */
   JSAMPLE *rescale;		/* => maxval-remapping array, or NULL */
+  unsigned int maxval;
 } ppm_source_struct;
 
 typedef ppm_source_struct * ppm_source_ptr;
@@ -146,11 +147,16 @@ get_text_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   FILE * infile = source->pub.input_file;
   register JSAMPROW ptr;
   register JSAMPLE *rescale = source->rescale;
+  unsigned int maxval = source->maxval;
   JDIMENSION col;
 
   ptr = source->pub.buffer[0];
   for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    register unsigned int temp;
+    temp = read_pbm_integer(cinfo, infile);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
   }
   return 1;
 }
@@ -164,13 +170,24 @@ get_text_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   FILE * infile = source->pub.input_file;
   register JSAMPROW ptr;
   register JSAMPLE *rescale = source->rescale;
+  unsigned int maxval = source->maxval;
   JDIMENSION col;
 
   ptr = source->pub.buffer[0];
   for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    register unsigned int temp;
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    temp = read_pbm_integer(cinfo, infile);
-    *ptr++ = rescale[read_pbm_integer(cinfo, infile)];
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
+    temp = read_pbm_integer(cinfo, infile);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
+    temp = read_pbm_integer(cinfo, infile);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
   }
   return 1;
 }
@@ -184,6 +201,7 @@ get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   register JSAMPROW ptr;
   register U_CHAR * bufferptr;
   register JSAMPLE *rescale = source->rescale;
+  unsigned int maxval = source->maxval;
   JDIMENSION col;
 
   if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
@@ -191,7 +209,11 @@ get_scaled_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   ptr = source->pub.buffer[0];
   bufferptr = source->iobuffer;
   for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[UCH(*bufferptr++)];
+    register unsigned int temp;
+    temp = (unsigned int) UCH(*bufferptr++);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
   }
   return 1;
 }
@@ -205,6 +227,7 @@ get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   register JSAMPROW ptr;
   register U_CHAR * bufferptr;
   register JSAMPLE *rescale = source->rescale;
+  unsigned int maxval = source->maxval;
   JDIMENSION col;
 
   if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
@@ -212,9 +235,19 @@ get_scaled_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   ptr = source->pub.buffer[0];
   bufferptr = source->iobuffer;
   for (col = cinfo->image_width; col > 0; col--) {
-    *ptr++ = rescale[UCH(*bufferptr++)];
+    register unsigned int temp;
-    *ptr++ = rescale[UCH(*bufferptr++)];
+    temp = (unsigned int) UCH(*bufferptr++);
-    *ptr++ = rescale[UCH(*bufferptr++)];
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
+    temp = (unsigned int) UCH(*bufferptr++);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
+    temp = (unsigned int) UCH(*bufferptr++);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+    *ptr++ = rescale[temp];
   }
   return 1;
 }
@@ -243,6 +276,7 @@ get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   register JSAMPROW ptr;
   register U_CHAR * bufferptr;
   register JSAMPLE *rescale = source->rescale;
+  unsigned int maxval = source->maxval;
   JDIMENSION col;
 
   if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
@@ -250,9 +284,11 @@ get_word_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   ptr = source->pub.buffer[0];
   bufferptr = source->iobuffer;
   for (col = cinfo->image_width; col > 0; col--) {
-    register int temp;
+    register unsigned int temp;
-    temp  = UCH(*bufferptr++) << 8;
+    temp = ((unsigned int) UCH(*bufferptr++)) << 8;
-    temp |= UCH(*bufferptr++);
+    temp |= (unsigned int) UCH(*bufferptr++);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
     *ptr++ = rescale[temp];
   }
   return 1;
@@ -267,6 +303,7 @@ get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   register JSAMPROW ptr;
   register U_CHAR * bufferptr;
   register JSAMPLE *rescale = source->rescale;
+  unsigned int maxval = source->maxval;
   JDIMENSION col;
 
   if (! ReadOK(source->pub.input_file, source->iobuffer, source->buffer_width))
@@ -274,15 +311,21 @@ get_word_rgb_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   ptr = source->pub.buffer[0];
   bufferptr = source->iobuffer;
   for (col = cinfo->image_width; col > 0; col--) {
-    register int temp;
+    register unsigned int temp;
-    temp  = UCH(*bufferptr++) << 8;
+    temp = ((unsigned int) UCH(*bufferptr++)) << 8;
-    temp |= UCH(*bufferptr++);
+    temp |= (unsigned int) UCH(*bufferptr++);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
     *ptr++ = rescale[temp];
-    temp  = UCH(*bufferptr++) << 8;
+    temp = ((unsigned int) UCH(*bufferptr++)) << 8;
-    temp |= UCH(*bufferptr++);
+    temp |= (unsigned int) UCH(*bufferptr++);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
     *ptr++ = rescale[temp];
-    temp  = UCH(*bufferptr++) << 8;
+    temp = ((unsigned int) UCH(*bufferptr++)) << 8;
-    temp |= UCH(*bufferptr++);
+    temp |= (unsigned int) UCH(*bufferptr++);
+    if (temp > maxval)
+      ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
     *ptr++ = rescale[temp];
   }
   return 1;
@@ -326,9 +369,14 @@ start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   if (w <= 0 || h <= 0 || maxval <= 0) /* error check */
     ERREXIT(cinfo, JERR_PPM_NOT);
 
+  if (((long) w      >> 24) ||	/* sanity check for buffer allocation below */
+      ((long) maxval >> 16))	/* support max 16-bit (2-byte) sample values */
+    ERREXIT(cinfo, JERR_PPM_OUTOFRANGE);
+
   cinfo->data_precision = BITS_IN_JSAMPLE; /* we always rescale data to this */
   cinfo->image_width = (JDIMENSION) w;
   cinfo->image_height = (JDIMENSION) h;
+  source->maxval = maxval;
 
   /* initialize flags to most common settings */
   need_iobuffer = TRUE;		/* do we need an I/O buffer? */
@@ -386,10 +434,9 @@ start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   /* Allocate space for I/O buffer: 1 or 3 bytes or words/pixel. */
   if (need_iobuffer) {
     source->buffer_width = (size_t) w * cinfo->input_components *
-      ((maxval<=255) ? SIZEOF(U_CHAR) : (2*SIZEOF(U_CHAR)));
+      ((maxval <= 255) ? SIZEOF(U_CHAR) : (2 * SIZEOF(U_CHAR)));
-    source->iobuffer = (U_CHAR *)
+    source->iobuffer = (U_CHAR *) (*cinfo->mem->alloc_small)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+      ((j_common_ptr) cinfo, JPOOL_IMAGE, source->buffer_width);
-				  source->buffer_width);
   }
 
   /* Create compressor input buffer. */
@@ -413,13 +460,12 @@ start_input_ppm (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     INT32 val, half_maxval;
 
     /* On 16-bit-int machines we have to be careful of maxval = 65535 */
-    source->rescale = (JSAMPLE *)
+    source->rescale = (JSAMPLE *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo,
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+      JPOOL_IMAGE, (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE)));
-				  (size_t) (((long) maxval + 1L) * SIZEOF(JSAMPLE)));
     half_maxval = maxval / 2;
     for (val = 0; val <= (INT32) maxval; val++) {
       /* The multiplication here must be done in 32 bits to avoid overflow */
-      source->rescale[val] = (JSAMPLE) ((val*MAXJSAMPLE + half_maxval)/maxval);
+      source->rescale[val] = (JSAMPLE) ((val * MAXJSAMPLE + half_maxval) / maxval);
     }
   }
 }
@@ -453,7 +499,7 @@ jinit_read_ppm (j_compress_ptr cinfo)
   source->pub.start_input = start_input_ppm;
   source->pub.finish_input = finish_input_ppm;
 
-  return (cjpeg_source_ptr) source;
+  return &source->pub;
 }
 
 #endif /* PPM_SUPPORTED */

rdswitch.c

@@ -2,6 +2,7 @@
  * rdswitch.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2003-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -347,8 +348,9 @@ set_sample_factors (j_compress_ptr cinfo, char *arg)
 	return FALSE;
       if ((ch1 != 'x' && ch1 != 'X') || ch2 != ',') /* syntax check */
 	return FALSE;
-      if (val1 <= 0 || val1 > 4 || val2 <= 0 || val2 > 4) {
+      if (val1 <= 0 || val1 > MAX_SAMP_FACTOR ||
-	fprintf(stderr, "JPEG sampling factors must be 1..4\n");
+	  val2 <= 0 || val2 > MAX_SAMP_FACTOR) {
+	fprintf(stderr, "JPEG sampling factors must be 1..%d\n", MAX_SAMP_FACTOR);
 	return FALSE;
       }
       cinfo->comp_info[ci].h_samp_factor = val1;

rdtarga.c

@@ -2,6 +2,7 @@
  * rdtarga.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
+ * Modified 2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -62,6 +63,7 @@ typedef struct _tga_source_struct {
   U_CHAR tga_pixel[4];
 
   int pixel_size;		/* Bytes per Targa pixel (1 to 4) */
+  int cmap_length;		/* colormap length */
 
   /* State info for reading RLE-coded pixels; both counts must be init to 0 */
   int block_count;		/* # of pixels remaining in RLE block */
@@ -177,7 +179,7 @@ get_8bit_gray_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   tga_source_ptr source = (tga_source_ptr) sinfo;
   register JSAMPROW ptr;
   register JDIMENSION col;
-  
+
   ptr = source->pub.buffer[0];
   for (col = cinfo->image_width; col > 0; col--) {
     (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
@@ -191,15 +193,20 @@ get_8bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
 /* This version is for reading 8-bit colormap indexes */
 {
   tga_source_ptr source = (tga_source_ptr) sinfo;
-  register int t;
   register JSAMPROW ptr;
+  register JSAMPARRAY colormap;
   register JDIMENSION col;
-  register JSAMPARRAY colormap = source->colormap;
+  register int t;
+  int cmaplen;
 
   ptr = source->pub.buffer[0];
+  colormap = source->colormap;
+  cmaplen = source->cmap_length;
   for (col = cinfo->image_width; col > 0; col--) {
     (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
     t = UCH(source->tga_pixel[0]);
+    if (t >= cmaplen)
+      ERREXIT(cinfo, JERR_TGA_BADPARMS);
     *ptr++ = colormap[0][t];
     *ptr++ = colormap[1][t];
     *ptr++ = colormap[2][t];
@@ -215,7 +222,7 @@ get_16bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   register int t;
   register JSAMPROW ptr;
   register JDIMENSION col;
-  
+
   ptr = source->pub.buffer[0];
   for (col = cinfo->image_width; col > 0; col--) {
     (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
@@ -242,7 +249,7 @@ get_24bit_row (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   tga_source_ptr source = (tga_source_ptr) sinfo;
   register JSAMPROW ptr;
   register JDIMENSION col;
-  
+
   ptr = source->pub.buffer[0];
   for (col = cinfo->image_width; col > 0; col--) {
     (*source->read_pixel) (source); /* Load next pixel into tga_pixel */
@@ -361,11 +368,12 @@ start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
   interlace_type = flags >> 6;	/* bits 6/7 are interlace code */
 
   if (cmaptype > 1 ||		/* cmaptype must be 0 or 1 */
+      width <= 0 || height <= 0 ||
       source->pixel_size < 1 || source->pixel_size > 4 ||
       (UCH(targaheader[16]) & 7) != 0 || /* bits/pixel must be multiple of 8 */
       interlace_type != 0)	/* currently don't allow interlaced image */
     ERREXIT(cinfo, JERR_TGA_BADPARMS);
-  
+
   if (subtype > 8) {
     /* It's an RLE-coded file */
     source->read_pixel = read_rle_pixel;
@@ -440,7 +448,7 @@ start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     source->pub.buffer_height = 1;
     source->pub.get_pixel_rows = source->get_pixel_rows;
   }
-  
+
   while (idlen--)		/* Throw away ID field */
     (void) read_byte(source);
 
@@ -450,12 +458,14 @@ start_input_tga (j_compress_ptr cinfo, cjpeg_source_ptr sinfo)
     /* Allocate space to store the colormap */
     source->colormap = (*cinfo->mem->alloc_sarray)
       ((j_common_ptr) cinfo, JPOOL_IMAGE, (JDIMENSION) maplen, (JDIMENSION) 3);
+    source->cmap_length = (int) maplen;
     /* and read it from the file */
     read_colormap(source, (int) maplen, UCH(targaheader[7]));
   } else {
     if (cmaptype)		/* but you promised a cmap! */
       ERREXIT(cinfo, JERR_TGA_BADPARMS);
     source->colormap = NULL;
+    source->cmap_length = 0;
   }
 
   cinfo->input_components = components;
@@ -494,7 +504,7 @@ jinit_read_targa (j_compress_ptr cinfo)
   source->pub.start_input = start_input_tga;
   source->pub.finish_input = finish_input_tga;
 
-  return (cjpeg_source_ptr) source;
+  return &source->pub;
 }
 
 #endif /* TARGA_SUPPORTED */

structure.txt

@@ -1,6 +1,6 @@
 IJG JPEG LIBRARY:  SYSTEM ARCHITECTURE
 
-Copyright (C) 1991-2012, Thomas G. Lane, Guido Vollbeding.
+Copyright (C) 1991-2013, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -170,16 +170,16 @@ can be simplified a little if they work on padded data: it's not necessary to
 have special cases at the right and bottom edges.  Therefore the interface
 buffer is always an integral number of blocks wide and high, and we expect
 compression preprocessing to pad the source data properly.  Padding will occur
-only to the next block (N-sample) boundary.  In an interleaved-scan situation,
+only to the next block (block_size-sample) boundary.  In an interleaved-scan
-additional dummy blocks may be used to fill out MCUs, but the MCU assembly and
+situation, additional dummy blocks may be used to fill out MCUs, but the MCU
-disassembly logic will create or discard these blocks internally.  (This is
+assembly and disassembly logic will create or discard these blocks internally.
-advantageous for speed reasons, since we avoid DCTing the dummy blocks.
+(This is advantageous for speed reasons, since we avoid DCTing the dummy
-It also permits a small reduction in file size, because the compressor can
+blocks.  It also permits a small reduction in file size, because the
-choose dummy block contents so as to minimize their size in compressed form.
+compressor can choose dummy block contents so as to minimize their size
-Finally, it makes the interface buffer specification independent of whether
+in compressed form.  Finally, it makes the interface buffer specification
-the file is actually interleaved or not.)  Applications that wish to deal
+independent of whether the file is actually interleaved or not.)
-directly with the downsampled data must provide similar buffering and padding
+Applications that wish to deal directly with the downsampled data must
-for odd-sized images.
+provide similar buffering and padding for odd-sized images.
 
 
 *** Poor man's object-oriented programming ***
@@ -345,9 +345,10 @@ The objects shown above are:
   require context rows above and below the current row group; the
   preprocessing controller is responsible for supplying these rows via proper
   buffering.  The downsampler is responsible for edge expansion at the right
-  edge (i.e., extending each sample row to a multiple of N samples); but the
+  edge (i.e., extending each sample row to a multiple of block_size samples);
-  preprocessing controller is responsible for vertical edge expansion (i.e.,
+  but the preprocessing controller is responsible for vertical edge expansion
-  duplicating the bottom sample row as needed to make a multiple of N rows).
+  (i.e., duplicating the bottom sample row as needed to make a multiple of
+  block_size rows).
 
 * Coefficient controller: buffer controller for the DCT-coefficient data.
   This controller handles MCU assembly, including insertion of dummy DCT
@@ -651,8 +652,8 @@ contain quantized coefficients everywhere outside the DCT/IDCT subsystems.
 quantization a la JPEG Part 3.)
 
 Notice that the allocation unit is now a row of 8x8 coefficient blocks,
-corresponding to N rows of samples.  Otherwise the structure is much the same
+corresponding to block_size rows of samples.  Otherwise the structure
-as for samples, and for the same reasons.
+is much the same as for samples, and for the same reasons.
 
 On machines where malloc() can't handle a request bigger than 64Kb, this data
 structure limits us to rows of less than 512 JBLOCKs, or a picture width of