The Independent JPEG Group's JPEG software v9c

BUILDING.txt

@@ -1,328 +0,0 @@
-*******************************************************************************
-**     Building on Unix Platforms, Cygwin, and MinGW
-*******************************************************************************
-
-==================
-Build Requirements
-==================
-
--- autoconf 2.56 or later
--- automake 1.7 or later
--- libtool 1.4 or later
-   * If using MinGW, these can be obtained by installing the MSYS DTK
-
--- NASM
-   * 0.98 or later is required for a 32-bit build
-   * NASM 2.05 or later is required for a 64-bit build
-   * NASM 2.07 or later is required for a 64-bit build on OS/X.  This can be
-     obtained from MacPorts (http://www.macports.org/).
-
-   The NASM 2.05 RPMs do not work on older Linux systems, such as Enterprise
-   Linux 4.  On such systems, you can easily build and install NASM 2.05
-   from the source RPM by executing the following as root:
-
-     ARCH=`uname -m`
-     wget http://www.nasm.us/pub/nasm/releasebuilds/2.05.01/nasm-2.05.01-1.src.rpm
-     rpmbuild --rebuild nasm-2.05.01-1.src.rpm
-     rpm -Uvh /usr/src/redhat/RPMS/$ARCH/nasm-2.05.01-1.$ARCH.rpm
-
-   NOTE: NASM build will fail if texinfo is not installed.
-
--- GCC v4.1 or later recommended for best performance
-
-======================
-Building libjpeg-turbo
-======================
-
-The following procedure will build libjpeg-turbo on Linux, FreeBSD, 32-bit
-OS X, and Solaris/x86 systems (on Solaris, this generates a 32-bit library.
-See below for 64-bit build instructions.)
-
-  cd libjpeg-turbo
-  autoreconf -fiv
-  sh ./configure
-  make
-
-NOTE: Running autoreconf is only necessary if building libjpeg-turbo from the
-SVN repository.
-
-This will generate the following files under .libs/
-
-  libjpeg.a
-      Static link library for libjpeg-turbo
-
-  libjpeg.so.62.0.0 (Linux, Solaris)
-  libjpeg.62.dylib (OS X)
-  libjpeg-62.dll (MinGW)
-  cygjpeg-62.dll (Cygwin)
-      Shared library for libjpeg-turbo
-
-  libjpeg.so (Linux, Solaris)
-  libjpeg.dylib (OS X)
-  libjpeg.dll.a (Cygwin, MinGW)
-      Development stub for libjpeg-turbo shared library
-
-  libturbojpeg.a
-      Static link library for TurboJPEG/OSS
-
-  libturbojpeg.so (Linux, Solaris)
-  libturbojpeg.dylib (OS X)
-      Shared library and development stub for TurboJPEG/OSS
-
-  libturbojpeg.dll (MinGW)
-  cygturbojpeg.dll (Cygwin)
-      Shared library for TurboJPEG/OSS
-
-  libturbojpeg.dll.a (Cygwin, MinGW)
-      Development stub for TurboJPEG/OSS shared library
-
-========================
-Installing libjpeg-turbo
-========================
-
-If you intend to install these libraries and the associated header files, then
-replace 'make' in the instructions above with
-
-  make install prefix={base dir} libdir={library directory}
-
-For example,
-
-  make install prefix=/usr/local libdir=/usr/local/lib64
-
-will install the header files in /usr/local/include and the library files in
-/usr/local/lib64.  If 'prefix' and 'libdir' are not specified, then the default
-is to install the header files in /opt/libjpeg-turbo/include and the library
-files in /opt/libjpeg-turbo/lib.
-
-NOTE: You can specify a prefix of /usr and a libdir of, for instance,
-/usr/lib64 to overwrite the system's version of libjpeg.  If you do this,
-however, then be sure to BACK UP YOUR SYSTEM'S INSTALLATION OF LIBJPEG before
-overwriting it.  It is recommended that you instead install libjpeg-turbo into
-a non-system directory and manipulate the LD_LIBRARY_PATH or create sym links
-to force applications to use libjpeg-turbo instead of libjpeg.  See
-README-turbo.txt for more information.
-
-=============
-Build Recipes
-=============
-
-32-bit Library Build on 64-bit Linux
-------------------------------------
-
-Add
-
-  --host i686-pc-linux-gnu CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32' LDFLAGS=-m32
-
-to the configure command line.
-
-
-64-bit Library Build on 64-bit OS/X
------------------------------------
-
-Add
-
-  --host x86_64-apple-darwin NASM=/opt/local/bin/nasm
-
-to the configure command line.  NASM 2.07 or later from MacPorts must be
-installed.
-
-
-32-bit Library Build on 64-bit OS/X
------------------------------------
-
-Add
-
-  CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32' LDFLAGS=-m32
-
-to the configure command line.
-
-
-64-bit Backward-Compatible Library Build on 64-bit OS/X
--------------------------------------------------------
-
-Add
-
-  --host x86_64-apple-darwin NASM=/opt/local/bin/nasm \
-  CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-    -mmacosx-version-min=10.4 -O3' \
-    CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-    -mmacosx-version-min=10.4 -O3' \
-    LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-    -mmacosx-version-min=10.4'
-
-to the configure command line.  The OS X 10.4 SDK, and NASM 2.07 or later from
-MacPorts, must be installed.
-
-
-32-bit Backward-Compatible Library Build on OS/X
-------------------------------------------------
-
-Add
-
-  CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-    -mmacosx-version-min=10.4 -O3 -m32' \
-    CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-    -mmacosx-version-min=10.4 -O3 -m32' \
-    LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
-    -mmacosx-version-min=10.4 -m32'
-
-to the configure command line.  The OS X 10.4 SDK must be installed.
-
-
-64-bit Library Build on 64-bit Solaris
---------------------------------------
-
-Add
-
-  --host x86_64-pc-solaris CFLAGS='-O3 -m64' CXXFLAGS='-O3 -m64' LDFLAGS=-m64
-
-to the configure command line.
-
-
-32-bit Library Build on 64-bit FreeBSD
---------------------------------------
-
-Add
-
-  --host i386-unknown-freebsd CC='gcc -B /usr/lib32' CXX='g++ -B/usr/lib32' \
-    CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32' LDFLAGS='-B/usr/lib32'
-
-to the configure command line.  NASM 2.07 or later from FreeBSD ports must be
-installed.
-
-
-MinGW Build on Cygwin
----------------------
-
-Add
-
-  --host mingw32
-
-to the configure command line.  This will produce libraries which do not
-depend on cygwin1.dll or other Cygwin DLL's.
-
-
-Sun Studio
-----------
-
-Add
-
-  CC=cc CXX=CC
-
-to the configure command line.  libjpeg-turbo will automatically be built with
-the maximum optimization level (-xO5) unless you override CFLAGS and CXXFLAGS.
-
-To build a 64-bit version of libjpeg-turbo using Sun Studio, add
-
-  --host x86_64-pc-solaris CC=cc CXX=CC CFLAGS='-xO5 -m64' \
-    CXXFLAGS='-xO5 -m64' LDFLAGS=-m64
-
-to the configure command line.
-
-
-*******************************************************************************
-**     Building on Windows (Visual C++)
-*******************************************************************************
-
-==================
-Build Requirements
-==================
-
--- GNU Make v3.7 or later
-   * Can be found in MSYS (http://www.mingw.org/download.shtml) or
-     Cygwin (http://www.cygwin.com/)
-
--- Windows SDK for Windows Server 2008 and .NET Framework 3.5 (or a later
-   version)
-
-   http://msdn.microsoft.com/en-us/windows/dd146047.aspx
-
-   * The Windows SDK includes both 32-bit and 64-bit Visual C++ compilers and
-     everything necessary to build libjpeg-turbo.  If you do not already have
-     Visual C++ installed, then this is the recommended solution.  Also tested
-     with Microsoft Visual C++ 2008 Express Edition (both are free downloads.)
-   * Add the compiler and SDK binary directories (for instance,
-     c:\Program Files\Microsoft Visual Studio 9.0\VC\BIN;
-     c:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE;
-     c:\Program Files\Microsoft SDKs\Windows\v6.1\bin)
-     to the system or user PATH environment variable prior to building
-     libjpeg-turbo.
-   * Add the compiler and SDK include directories (for instance,
-     c:\Program Files\Microsoft Visual Studio 9.0\VC\INCLUDE;
-     c:\Program Files\Microsoft SDKs\Windows\v6.1\include)
-     to the system or user INCLUDE environment variable prior to building
-     libjpeg-turbo.
-   * Add the compiler library directory (for instance,
-     c:\Program Files\Microsoft Visual Studio 9.0\VC\LIB;
-     c:\Program Files\Microsoft SDKs\Windows\v6.1\lib)
-     to the system or user LIB environment variable prior to building
-     libjpeg-turbo.
-
--- NASM (http://www.nasm.us/) 0.98 or later (NASM 2.05 or later is required for
-   a 64-bit build)
-
-======================
-Building libjpeg-turbo
-======================
-
-  cd libjpeg-turbo
-  make -f win/Makefile
-
-This will generate the following files under libjpeg-turbo\windows\:
-
-  jpeg-static.lib        Static link library for libjpeg-turbo
-  jpeg62.dll             Shared library for libjpeg-turbo
-  jpeg.lib               Development stub for libjpeg-turbo shared library
-  turbojpeg-static.lib   Static link library for TurboJPEG/OSS
-  turbojpeg.dll          Shared library for TurboJPEG/OSS
-  turbojpeg.lib          Development stub for TurboJPEG/OSS shared library
-
-If a 64-bit Windows platform is detected, then the build system will attempt
-to build a 64-bit version of libjpeg-turbo.  You can override this by running
-
-  make -f win/Makefile WIN64=no
-
-
-*******************************************************************************
-**     Creating Release Packages
-*******************************************************************************
-
-The following commands can be used to create various types of release packages:
-
-make rpm
-
-  Create RedHat-style binary RPM package.  Requires RPM v4 or later.
-
-make srpm
-
-  This runs 'make dist' to create a pristine source tarball, then creates a
-  RedHat-style source RPM package from the tarball.  Requires RPM v4 or later.
-
-make deb
-
-  Create Debian-style binary package.  Requires dpkg.
-
-make dmg
-
-  Create Macintosh package/disk image.  This requires the PackageMaker
-  application, which must be installed in /Developer/Applications/Utilities.
-
-make udmg
-
-  On 64-bit OS X systems, this creates a version of the Macintosh package and
-  disk image which contains universal i386/x86-64 binaries.  The 32-bit fork of
-  these binaries is backward compatible with OS X 10.4 and later.  The 64-bit
-  fork can be made backward compatible as well by using the instructions in
-  the "Build Recipes" section.  OS X 10.4 compatibility SDK required.
-
-make nsi
-
-  When using MinGW, this creates a Win32 installer for the GCC version of the
-  libjpeg-turbo SDK.  This requires the Nullsoft Install System
-  (http://nsis.sourceforge.net/.)  makensis.exe should be in your PATH.
-
-make -f win/Makefile nsi
-
-  This creates a Win32 installer for the Visual C++ version of the
-  libjpeg-turbo SDK.  This requires the Nullsoft Install System
-  (http://nsis.sourceforge.net/.)  makensis.exe should be in your PATH.

ChangeLog.txt

@@ -1,54 +0,0 @@
-Significant changes since 1.0.0
-===============================
-
-[1] The Huffman decoder will now handle erroneous Huffman codes (for instance,
-from a corrupt JPEG image.)  Previously, these would cause libjpeg-turbo to
-crash under certain circumstances.
-
-[2] Fixed typo in SIMD dispatch routines which was causing 4:2:2 upsampling to
-be used instead of 4:2:0 when decompressing JPEG images using SSE2 code.
-
-[3] configure script will now automatically determine whether the
-INCOMPLETE_TYPES_BROKEN macro should be defined.
-
-
-Significant changes since 0.0.93
-================================
-
-[1] 2983700: Further FreeBSD build tweaks (no longer necessary to specify
---host when configuring on a 64-bit system)
-
-[2] Created sym. links in the Unix/Linux packages so that the TurboJPEG
-include file can always be found in /opt/libjpeg-turbo/include, the 32-bit
-static libraries can always be found in /opt/libjpeg-turbo/lib32, and the
-64-bit static libraries can always be found in /opt/libjpeg-turbo/lib64.
-
-[3] The Unix/Linux distribution packages now include the libjpeg run-time
-programs (cjpeg, etc.) and man pages.
-
-[4] Created a 32-bit supplementary package for amd64 Debian systems which
-contains just the 32-bit libjpeg-turbo libraries.
-
-[5] Moved the libraries from */lib32 to */lib in the i386 Debian package.
-
-[6] Include distribution package for Cygwin
-
-[7] No longer necessary to specify --without-simd on non-x86 architectures, and
-unit tests now work on those architectures.
-
-
-Significant changes since 0.0.91
-================================
-
-[1] 2982659, Fixed x86-64 build on FreeBSD systems
-
-[2] 2988188: Added support for Windows 64-bit systems
-
-
-Significant changes since 0.0.90
-================================
-
-[1] Added documentation to .deb packages
-
-[2] 2968313: Fixed data corruption issues when decompressing large JPEG images
-and/or using buffered I/O with the libjpeg-turbo decompressor

LGPL.txt

@@ -1,504 +0,0 @@
-		  GNU LESSER GENERAL PUBLIC LICENSE
-		       Version 2.1, February 1999
-
- Copyright (C) 1991, 1999 Free Software Foundation, Inc.
-     59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-[This is the first released version of the Lesser GPL.  It also counts
- as the successor of the GNU Library Public License, version 2, hence
- the version number 2.1.]
-
-			    Preamble
-
-  The licenses for most software are designed to take away your
-freedom to share and change it.  By contrast, the GNU General Public
-Licenses are intended to guarantee your freedom to share and change
-free software--to make sure the software is free for all its users.
-
-  This license, the Lesser General Public License, applies to some
-specially designated software packages--typically libraries--of the
-Free Software Foundation and other authors who decide to use it.  You
-can use it too, but we suggest you first think carefully about whether
-this license or the ordinary General Public License is the better
-strategy to use in any particular case, based on the explanations below.
-
-  When we speak of free software, we are referring to freedom of use,
-not price.  Our General Public Licenses are designed to make sure that
-you have the freedom to distribute copies of free software (and charge
-for this service if you wish); that you receive source code or can get
-it if you want it; that you can change the software and use pieces of
-it in new free programs; and that you are informed that you can do
-these things.
-
-  To protect your rights, we need to make restrictions that forbid
-distributors to deny you these rights or to ask you to surrender these
-rights.  These restrictions translate to certain responsibilities for
-you if you distribute copies of the library or if you modify it.
-
-  For example, if you distribute copies of the library, whether gratis
-or for a fee, you must give the recipients all the rights that we gave
-you.  You must make sure that they, too, receive or can get the source
-code.  If you link other code with the library, you must provide
-complete object files to the recipients, so that they can relink them
-with the library after making changes to the library and recompiling
-it.  And you must show them these terms so they know their rights.
-
-  We protect your rights with a two-step method: (1) we copyright the
-library, and (2) we offer you this license, which gives you legal
-permission to copy, distribute and/or modify the library.
-
-  To protect each distributor, we want to make it very clear that
-there is no warranty for the free library.  Also, if the library is
-modified by someone else and passed on, the recipients should know
-that what they have is not the original version, so that the original
-author's reputation will not be affected by problems that might be
-introduced by others.
-
-  Finally, software patents pose a constant threat to the existence of
-any free program.  We wish to make sure that a company cannot
-effectively restrict the users of a free program by obtaining a
-restrictive license from a patent holder.  Therefore, we insist that
-any patent license obtained for a version of the library must be
-consistent with the full freedom of use specified in this license.
-
-  Most GNU software, including some libraries, is covered by the
-ordinary GNU General Public License.  This license, the GNU Lesser
-General Public License, applies to certain designated libraries, and
-is quite different from the ordinary General Public License.  We use
-this license for certain libraries in order to permit linking those
-libraries into non-free programs.
-
-  When a program is linked with a library, whether statically or using
-a shared library, the combination of the two is legally speaking a
-combined work, a derivative of the original library.  The ordinary
-General Public License therefore permits such linking only if the
-entire combination fits its criteria of freedom.  The Lesser General
-Public License permits more lax criteria for linking other code with
-the library.
-
-  We call this license the "Lesser" General Public License because it
-does Less to protect the user's freedom than the ordinary General
-Public License.  It also provides other free software developers Less
-of an advantage over competing non-free programs.  These disadvantages
-are the reason we use the ordinary General Public License for many
-libraries.  However, the Lesser license provides advantages in certain
-special circumstances.
-
-  For example, on rare occasions, there may be a special need to
-encourage the widest possible use of a certain library, so that it becomes
-a de-facto standard.  To achieve this, non-free programs must be
-allowed to use the library.  A more frequent case is that a free
-library does the same job as widely used non-free libraries.  In this
-case, there is little to gain by limiting the free library to free
-software only, so we use the Lesser General Public License.
-
-  In other cases, permission to use a particular library in non-free
-programs enables a greater number of people to use a large body of
-free software.  For example, permission to use the GNU C Library in
-non-free programs enables many more people to use the whole GNU
-operating system, as well as its variant, the GNU/Linux operating
-system.
-
-  Although the Lesser General Public License is Less protective of the
-users' freedom, it does ensure that the user of a program that is
-linked with the Library has the freedom and the wherewithal to run
-that program using a modified version of the Library.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.  Pay close attention to the difference between a
-"work based on the library" and a "work that uses the library".  The
-former contains code derived from the library, whereas the latter must
-be combined with the library in order to run.
-
-		  GNU LESSER GENERAL PUBLIC LICENSE
-   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-
-  0. This License Agreement applies to any software library or other
-program which contains a notice placed by the copyright holder or
-other authorized party saying it may be distributed under the terms of
-this Lesser General Public License (also called "this License").
-Each licensee is addressed as "you".
-
-  A "library" means a collection of software functions and/or data
-prepared so as to be conveniently linked with application programs
-(which use some of those functions and data) to form executables.
-
-  The "Library", below, refers to any such software library or work
-which has been distributed under these terms.  A "work based on the
-Library" means either the Library or any derivative work under
-copyright law: that is to say, a work containing the Library or a
-portion of it, either verbatim or with modifications and/or translated
-straightforwardly into another language.  (Hereinafter, translation is
-included without limitation in the term "modification".)
-
-  "Source code" for a work means the preferred form of the work for
-making modifications to it.  For a library, complete source code means
-all the source code for all modules it contains, plus any associated
-interface definition files, plus the scripts used to control compilation
-and installation of the library.
-
-  Activities other than copying, distribution and modification are not
-covered by this License; they are outside its scope.  The act of
-running a program using the Library is not restricted, and output from
-such a program is covered only if its contents constitute a work based
-on the Library (independent of the use of the Library in a tool for
-writing it).  Whether that is true depends on what the Library does
-and what the program that uses the Library does.
-  
-  1. You may copy and distribute verbatim copies of the Library's
-complete source code as you receive it, in any medium, provided that
-you conspicuously and appropriately publish on each copy an
-appropriate copyright notice and disclaimer of warranty; keep intact
-all the notices that refer to this License and to the absence of any
-warranty; and distribute a copy of this License along with the
-Library.
-
-  You may charge a fee for the physical act of transferring a copy,
-and you may at your option offer warranty protection in exchange for a
-fee.
-
-  2. You may modify your copy or copies of the Library or any portion
-of it, thus forming a work based on the Library, and copy and
-distribute such modifications or work under the terms of Section 1
-above, provided that you also meet all of these conditions:
-
-    a) The modified work must itself be a software library.
-
-    b) You must cause the files modified to carry prominent notices
-    stating that you changed the files and the date of any change.
-
-    c) You must cause the whole of the work to be licensed at no
-    charge to all third parties under the terms of this License.
-
-    d) If a facility in the modified Library refers to a function or a
-    table of data to be supplied by an application program that uses
-    the facility, other than as an argument passed when the facility
-    is invoked, then you must make a good faith effort to ensure that,
-    in the event an application does not supply such function or
-    table, the facility still operates, and performs whatever part of
-    its purpose remains meaningful.
-
-    (For example, a function in a library to compute square roots has
-    a purpose that is entirely well-defined independent of the
-    application.  Therefore, Subsection 2d requires that any
-    application-supplied function or table used by this function must
-    be optional: if the application does not supply it, the square
-    root function must still compute square roots.)
-
-These requirements apply to the modified work as a whole.  If
-identifiable sections of that work are not derived from the Library,
-and can be reasonably considered independent and separate works in
-themselves, then this License, and its terms, do not apply to those
-sections when you distribute them as separate works.  But when you
-distribute the same sections as part of a whole which is a work based
-on the Library, the distribution of the whole must be on the terms of
-this License, whose permissions for other licensees extend to the
-entire whole, and thus to each and every part regardless of who wrote
-it.
-
-Thus, it is not the intent of this section to claim rights or contest
-your rights to work written entirely by you; rather, the intent is to
-exercise the right to control the distribution of derivative or
-collective works based on the Library.
-
-In addition, mere aggregation of another work not based on the Library
-with the Library (or with a work based on the Library) on a volume of
-a storage or distribution medium does not bring the other work under
-the scope of this License.
-
-  3. You may opt to apply the terms of the ordinary GNU General Public
-License instead of this License to a given copy of the Library.  To do
-this, you must alter all the notices that refer to this License, so
-that they refer to the ordinary GNU General Public License, version 2,
-instead of to this License.  (If a newer version than version 2 of the
-ordinary GNU General Public License has appeared, then you can specify
-that version instead if you wish.)  Do not make any other change in
-these notices.
-
-  Once this change is made in a given copy, it is irreversible for
-that copy, so the ordinary GNU General Public License applies to all
-subsequent copies and derivative works made from that copy.
-
-  This option is useful when you wish to copy part of the code of
-the Library into a program that is not a library.
-
-  4. You may copy and distribute the Library (or a portion or
-derivative of it, under Section 2) in object code or executable form
-under the terms of Sections 1 and 2 above provided that you accompany
-it with the complete corresponding machine-readable source code, which
-must be distributed under the terms of Sections 1 and 2 above on a
-medium customarily used for software interchange.
-
-  If distribution of object code is made by offering access to copy
-from a designated place, then offering equivalent access to copy the
-source code from the same place satisfies the requirement to
-distribute the source code, even though third parties are not
-compelled to copy the source along with the object code.
-
-  5. A program that contains no derivative of any portion of the
-Library, but is designed to work with the Library by being compiled or
-linked with it, is called a "work that uses the Library".  Such a
-work, in isolation, is not a derivative work of the Library, and
-therefore falls outside the scope of this License.
-
-  However, linking a "work that uses the Library" with the Library
-creates an executable that is a derivative of the Library (because it
-contains portions of the Library), rather than a "work that uses the
-library".  The executable is therefore covered by this License.
-Section 6 states terms for distribution of such executables.
-
-  When a "work that uses the Library" uses material from a header file
-that is part of the Library, the object code for the work may be a
-derivative work of the Library even though the source code is not.
-Whether this is true is especially significant if the work can be
-linked without the Library, or if the work is itself a library.  The
-threshold for this to be true is not precisely defined by law.
-
-  If such an object file uses only numerical parameters, data
-structure layouts and accessors, and small macros and small inline
-functions (ten lines or less in length), then the use of the object
-file is unrestricted, regardless of whether it is legally a derivative
-work.  (Executables containing this object code plus portions of the
-Library will still fall under Section 6.)
-
-  Otherwise, if the work is a derivative of the Library, you may
-distribute the object code for the work under the terms of Section 6.
-Any executables containing that work also fall under Section 6,
-whether or not they are linked directly with the Library itself.
-
-  6. As an exception to the Sections above, you may also combine or
-link a "work that uses the Library" with the Library to produce a
-work containing portions of the Library, and distribute that work
-under terms of your choice, provided that the terms permit
-modification of the work for the customer's own use and reverse
-engineering for debugging such modifications.
-
-  You must give prominent notice with each copy of the work that the
-Library is used in it and that the Library and its use are covered by
-this License.  You must supply a copy of this License.  If the work
-during execution displays copyright notices, you must include the
-copyright notice for the Library among them, as well as a reference
-directing the user to the copy of this License.  Also, you must do one
-of these things:
-
-    a) Accompany the work with the complete corresponding
-    machine-readable source code for the Library including whatever
-    changes were used in the work (which must be distributed under
-    Sections 1 and 2 above); and, if the work is an executable linked
-    with the Library, with the complete machine-readable "work that
-    uses the Library", as object code and/or source code, so that the
-    user can modify the Library and then relink to produce a modified
-    executable containing the modified Library.  (It is understood
-    that the user who changes the contents of definitions files in the
-    Library will not necessarily be able to recompile the application
-    to use the modified definitions.)
-
-    b) Use a suitable shared library mechanism for linking with the
-    Library.  A suitable mechanism is one that (1) uses at run time a
-    copy of the library already present on the user's computer system,
-    rather than copying library functions into the executable, and (2)
-    will operate properly with a modified version of the library, if
-    the user installs one, as long as the modified version is
-    interface-compatible with the version that the work was made with.
-
-    c) Accompany the work with a written offer, valid for at
-    least three years, to give the same user the materials
-    specified in Subsection 6a, above, for a charge no more
-    than the cost of performing this distribution.
-
-    d) If distribution of the work is made by offering access to copy
-    from a designated place, offer equivalent access to copy the above
-    specified materials from the same place.
-
-    e) Verify that the user has already received a copy of these
-    materials or that you have already sent this user a copy.
-
-  For an executable, the required form of the "work that uses the
-Library" must include any data and utility programs needed for
-reproducing the executable from it.  However, as a special exception,
-the materials to be distributed need not include anything that is
-normally distributed (in either source or binary form) with the major
-components (compiler, kernel, and so on) of the operating system on
-which the executable runs, unless that component itself accompanies
-the executable.
-
-  It may happen that this requirement contradicts the license
-restrictions of other proprietary libraries that do not normally
-accompany the operating system.  Such a contradiction means you cannot
-use both them and the Library together in an executable that you
-distribute.
-
-  7. You may place library facilities that are a work based on the
-Library side-by-side in a single library together with other library
-facilities not covered by this License, and distribute such a combined
-library, provided that the separate distribution of the work based on
-the Library and of the other library facilities is otherwise
-permitted, and provided that you do these two things:
-
-    a) Accompany the combined library with a copy of the same work
-    based on the Library, uncombined with any other library
-    facilities.  This must be distributed under the terms of the
-    Sections above.
-
-    b) Give prominent notice with the combined library of the fact
-    that part of it is a work based on the Library, and explaining
-    where to find the accompanying uncombined form of the same work.
-
-  8. You may not copy, modify, sublicense, link with, or distribute
-the Library except as expressly provided under this License.  Any
-attempt otherwise to copy, modify, sublicense, link with, or
-distribute the Library is void, and will automatically terminate your
-rights under this License.  However, parties who have received copies,
-or rights, from you under this License will not have their licenses
-terminated so long as such parties remain in full compliance.
-
-  9. You are not required to accept this License, since you have not
-signed it.  However, nothing else grants you permission to modify or
-distribute the Library or its derivative works.  These actions are
-prohibited by law if you do not accept this License.  Therefore, by
-modifying or distributing the Library (or any work based on the
-Library), you indicate your acceptance of this License to do so, and
-all its terms and conditions for copying, distributing or modifying
-the Library or works based on it.
-
-  10. Each time you redistribute the Library (or any work based on the
-Library), the recipient automatically receives a license from the
-original licensor to copy, distribute, link with or modify the Library
-subject to these terms and conditions.  You may not impose any further
-restrictions on the recipients' exercise of the rights granted herein.
-You are not responsible for enforcing compliance by third parties with
-this License.
-
-  11. If, as a consequence of a court judgment or allegation of patent
-infringement or for any other reason (not limited to patent issues),
-conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot
-distribute so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you
-may not distribute the Library at all.  For example, if a patent
-license would not permit royalty-free redistribution of the Library by
-all those who receive copies directly or indirectly through you, then
-the only way you could satisfy both it and this License would be to
-refrain entirely from distribution of the Library.
-
-If any portion of this section is held invalid or unenforceable under any
-particular circumstance, the balance of the section is intended to apply,
-and the section as a whole is intended to apply in other circumstances.
-
-It is not the purpose of this section to induce you to infringe any
-patents or other property right claims or to contest validity of any
-such claims; this section has the sole purpose of protecting the
-integrity of the free software distribution system which is
-implemented by public license practices.  Many people have made
-generous contributions to the wide range of software distributed
-through that system in reliance on consistent application of that
-system; it is up to the author/donor to decide if he or she is willing
-to distribute software through any other system and a licensee cannot
-impose that choice.
-
-This section is intended to make thoroughly clear what is believed to
-be a consequence of the rest of this License.
-
-  12. If the distribution and/or use of the Library is restricted in
-certain countries either by patents or by copyrighted interfaces, the
-original copyright holder who places the Library under this License may add
-an explicit geographical distribution limitation excluding those countries,
-so that distribution is permitted only in or among countries not thus
-excluded.  In such case, this License incorporates the limitation as if
-written in the body of this License.
-
-  13. The Free Software Foundation may publish revised and/or new
-versions of the Lesser General Public License from time to time.
-Such new versions will be similar in spirit to the present version,
-but may differ in detail to address new problems or concerns.
-
-Each version is given a distinguishing version number.  If the Library
-specifies a version number of this License which applies to it and
-"any later version", you have the option of following the terms and
-conditions either of that version or of any later version published by
-the Free Software Foundation.  If the Library does not specify a
-license version number, you may choose any version ever published by
-the Free Software Foundation.
-
-  14. If you wish to incorporate parts of the Library into other free
-programs whose distribution conditions are incompatible with these,
-write to the author to ask for permission.  For software which is
-copyrighted by the Free Software Foundation, write to the Free
-Software Foundation; we sometimes make exceptions for this.  Our
-decision will be guided by the two goals of preserving the free status
-of all derivatives of our free software and of promoting the sharing
-and reuse of software generally.
-
-			    NO WARRANTY
-
-  15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
-WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
-EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
-OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
-KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
-LIBRARY IS WITH YOU.  SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
-THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
-WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
-AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
-FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
-CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
-LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
-RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
-FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
-SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
-DAMAGES.
-
-		     END OF TERMS AND CONDITIONS
-
-           How to Apply These Terms to Your New Libraries
-
-  If you develop a new library, and you want it to be of the greatest
-possible use to the public, we recommend making it free software that
-everyone can redistribute and change.  You can do so by permitting
-redistribution under these terms (or, alternatively, under the terms of the
-ordinary General Public License).
-
-  To apply these terms, attach the following notices to the library.  It is
-safest to attach them to the start of each source file to most effectively
-convey the exclusion of warranty; and each file should have at least the
-"copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the library's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This library is free software; you can redistribute it and/or
-    modify it under the terms of the GNU Lesser General Public
-    License as published by the Free Software Foundation; either
-    version 2.1 of the License, or (at your option) any later version.
-
-    This library is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
-    Lesser General Public License for more details.
-
-    You should have received a copy of the GNU Lesser General Public
-    License along with this library; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-Also add information on how to contact you by electronic and paper mail.
-
-You should also get your employer (if you work as a programmer) or your
-school, if any, to sign a "copyright disclaimer" for the library, if
-necessary.  Here is a sample; alter the names:
-
-  Yoyodyne, Inc., hereby disclaims all copyright interest in the
-  library `Frob' (a library for tweaking knobs) written by James Random Hacker.
-
-  <signature of Ty Coon>, 1 April 1990
-  Ty Coon, President of Vice
-
-That's all there is to it!
-
-

LICENSE.txt

@@ -1,53 +0,0 @@
-                wxWindows Library Licence, Version 3.1
-                ======================================
-
-  Copyright (C) 1998-2005 Julian Smart, Robert Roebling et al
-
-  Everyone is permitted to copy and distribute verbatim copies
-  of this licence document, but changing it is not allowed.
-
-                       WXWINDOWS LIBRARY LICENCE
-     TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
-  
-  This library is free software; you can redistribute it and/or modify it
-  under the terms of the GNU Library General Public Licence as published by
-  the Free Software Foundation; either version 2 of the Licence, or (at
-  your option) any later version.
-  
-  This library is distributed in the hope that it will be useful, but
-  WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Library
-  General Public Licence for more details.
-
-  You should have received a copy of the GNU Library General Public Licence
-  along with this software, usually in a file named COPYING.LIB.  If not,
-  write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330,
-  Boston, MA 02111-1307 USA.
-
-  EXCEPTION NOTICE
-
-  1. As a special exception, the copyright holders of this library give
-  permission for additional uses of the text contained in this release of
-  the library as licenced under the wxWindows Library Licence, applying
-  either version 3.1 of the Licence, or (at your option) any later version of
-  the Licence as published by the copyright holders of version
-  3.1 of the Licence document.
-
-  2. The exception is that you may use, copy, link, modify and distribute
-  under your own terms, binary object code versions of works based
-  on the Library.
-
-  3. If you copy code from files distributed under the terms of the GNU
-  General Public Licence or the GNU Library General Public Licence into a
-  copy of this library, as this licence permits, the exception does not
-  apply to the code that you add in this way.  To avoid misleading anyone as
-  to the status of such modified files, you must delete this exception
-  notice from such code and/or adjust the licensing conditions notice
-  accordingly.
-
-  4. If you write modifications of your own for this library, it is your
-  choice whether to permit this exception to apply to your modifications. 
-  If you do not wish that, you must delete the exception notice from such
-  code and/or adjust the licensing conditions notice accordingly.
-
-

Makefile.am

@@ -1,209 +1,138 @@
-lib_LTLIBRARIES = libjpeg.la libturbojpeg.la
-libjpeg_la_LDFLAGS = -version-number 62:0:0 -no-undefined
-libturbojpeg_la_LDFLAGS = -avoid-version -no-undefined
-include_HEADERS = jerror.h jmorecfg.h jpeglib.h turbojpeg.h
-nodist_include_HEADERS = jconfig.h
+## Process this file with automake to produce Makefile.in
+#
+#  Automake Makefile for the JPEG library
+#
+#  This file is written by Bob Friesenhahn, Guido Vollbeding
+#
 
-HDRS = jchuff.h jdct.h jdhuff.h jerror.h jinclude.h jmemsys.h jmorecfg.h \
-	jpegint.h jpeglib.h jversion.h jsimd.h jsimddct.h
+# Sources to build library
+LIBSOURCES = jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \
+        jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
+        jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \
+        jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
+        jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
+        jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \
+        jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \
+        jquant2.c jutils.c jmemmgr.c @MEMORYMGR@.c
 
-libjpeg_la_SOURCES = $(HDRS) jcapimin.c jcapistd.c jccoefct.c jccolor.c \
-	jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \
-	jcomapi.c jcparam.c jcphuff.c jcprepct.c jcsample.c jctrans.c \
-	jdapimin.c jdapistd.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \
-	jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \
-	jdmerge.c jdphuff.c jdpostct.c jdsample.c jdtrans.c jerror.c \
-	jfdctflt.c jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c \
-	jidctred.c jquant1.c jquant2.c jutils.c jmemmgr.c jmemnobs.c
+# System dependent sources
+SYSDEPSOURCES = jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c
 
-libturbojpeg_la_SOURCES = $(libjpeg_la_SOURCES) turbojpegl.c turbojpeg.h \
-	turbojpeg-mapfile
+# Headers which are installed to support the library
+INSTINCLUDES  = jerror.h jmorecfg.h jpeglib.h
 
-if VERSION_SCRIPT
+# Headers which are not installed
+OTHERINCLUDES = cderror.h cdjpeg.h jdct.h jinclude.h jmemsys.h jpegint.h \
+        jversion.h transupp.h
 
-libturbojpeg_la_LDFLAGS += $(VERSION_SCRIPT_FLAG)$(srcdir)/turbojpeg-mapfile
+# Manual pages (Automake uses 'MANS' for itself)
+DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
 
+# Other documentation files
+DOCS= README install.txt usage.txt wizard.txt example.c libjpeg.txt \
+        structure.txt coderules.txt filelist.txt change.log
+
+# Makefiles for various systems
+MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.b32 \
+        makefile.bcc makefile.mc6 makefile.dj makefile.wat makefile.vc \
+        makefile.vs makejdsw.vc6 makeadsw.vc6 makejdep.vc6 makejdsp.vc6 \
+        makejmak.vc6 makecdep.vc6 makecdsp.vc6 makecmak.vc6 makeddep.vc6 \
+        makeddsp.vc6 makedmak.vc6 maketdep.vc6 maketdsp.vc6 maketmak.vc6 \
+        makerdep.vc6 makerdsp.vc6 makermak.vc6 makewdep.vc6 makewdsp.vc6 \
+        makewmak.vc6 makejsln.v15 makeasln.v15 makejvcx.v15 makejfil.v15 \
+        makecvcx.v15 makecfil.v15 makedvcx.v15 makedfil.v15 maketvcx.v15 \
+        maketfil.v15 makervcx.v15 makerfil.v15 makewvcx.v15 makewfil.v15 \
+        makeproj.mac makcjpeg.st makdjpeg.st makljpeg.st maktjpeg.st \
+        makefile.manx makefile.sas makefile.mms makefile.vms makvms.opt
+
+# Configuration files
+CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \
+        jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \
+        jconfig.vms
+
+# Support scripts for configure
+CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp \
+        missing ar-lib
+
+# Miscellaneous support files
+OTHERFILES= jconfig.txt ckconfig.c jmemdosa.asm libjpeg.map libjpeg.pc.in
+
+# Test support files
+TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \
+        testimgp.jpg
+
+# libtool libraries to build
+lib_LTLIBRARIES = libjpeg.la
+
+# Library sources for libjpeg.la
+libjpeg_la_SOURCES = $(LIBSOURCES)
+
+# LDFLAGS for libjpeg.la
+libjpeg_la_LDFLAGS = -no-undefined \
+        -version-info $(JPEG_LIB_VERSION)
+
+if HAVE_LD_VERSION_SCRIPT
+  libjpeg_la_LDFLAGS += -Wl,--version-script=$(srcdir)/libjpeg.map
 endif
 
-if WITH_SIMD
-
-SUBDIRS = simd
-libjpeg_la_LIBADD = simd/libsimd.la
-libturbojpeg_la_LIBADD = simd/libsimd.la
-
-else
-
-libjpeg_la_SOURCES += jsimd_none.c
-
-endif
-
-TSTHDRS = rrutil.h rrtimer.h
-
+# Executables to build
 bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom
-noinst_PROGRAMS = jpgtest jpegut
-
-jpgtest_SOURCES = $(TSTHDRS) jpgtest.cxx bmp.h bmp.c
-
-jpgtest_LDADD = libturbojpeg.la
-
-jpegut_SOURCES = $(TSTHDRS) jpegut.c bmp.h bmp.c
-
-jpegut_LDADD = libturbojpeg.la
-
-cjpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c cjpeg.c rdbmp.c rdgif.c \
-	rdppm.c rdswitch.c rdtarga.c 
-
-cjpeg_LDADD = libjpeg.la
-
-cjpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
-	-DTARGA_SUPPORTED
-
-djpeg_SOURCES = cdjpeg.h cderror.h cdjpeg.c djpeg.c rdcolmap.c rdswitch.c \
-	wrbmp.c wrgif.c wrppm.c wrtarga.c
-
-djpeg_LDADD = libjpeg.la
-
-djpeg_CFLAGS = -DBMP_SUPPORTED -DGIF_SUPPORTED -DPPM_SUPPORTED \
-	-DTARGA_SUPPORTED
-
-jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c transupp.h
-
-jpegtran_LDADD = libjpeg.la
 
+# Executable sources & libs
+cjpeg_SOURCES    = cjpeg.c rdppm.c rdgif.c rdtarga.c rdrle.c rdbmp.c \
+        rdswitch.c cdjpeg.c
+cjpeg_LDADD      = libjpeg.la
+djpeg_SOURCES    = djpeg.c wrppm.c wrgif.c wrtarga.c wrrle.c wrbmp.c \
+        rdcolmap.c cdjpeg.c
+djpeg_LDADD      = libjpeg.la
+jpegtran_SOURCES = jpegtran.c rdswitch.c cdjpeg.c transupp.c
+jpegtran_LDADD   = libjpeg.la
 rdjpgcom_SOURCES = rdjpgcom.c
-
-rdjpgcom_LDADD = libjpeg.la
-
 wrjpgcom_SOURCES = wrjpgcom.c
 
-wrjpgcom_LDADD = libjpeg.la
+# Manual pages to install
+man_MANS = $(DISTMANS)
 
+# Headers to install
+include_HEADERS = $(INSTINCLUDES)
 
-dist_man1_MANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
+# Other distributed headers
+noinst_HEADERS = $(OTHERINCLUDES)
 
-DOCS= README install.doc usage.doc wizard.doc example.c libjpeg.doc \
-	structure.doc coderules.doc filelist.doc jconfig.doc change.log \
-	README-turbo.txt rdrle.c wrrle.c LICENSE.txt LGPL.txt BUILDING.txt \
-	ChangeLog.txt
+# Other distributed files
+EXTRA_DIST =  $(DOCS) $(DISTMANS) $(MKFILES) $(CONFIGFILES) $(SYSDEPSOURCES) \
+        $(OTHERFILES) $(TESTFILES)
 
-TESTFILES= testorig.jpg testorig.ppm testimg.bmp testimgflt.jpg \
-	testimgfst.jpg testimgint.jpg testimgp.jpg testimgflt.ppm testimgfst.ppm \
-	testimgint.ppm testimgflt-nosimd.jpg
+# pkg-config file
+pkgconfigdir = $(libdir)/pkgconfig
+nodist_pkgconfig_DATA = libjpeg.pc
 
-EXTRA_DIST = win release $(DOCS) $(TESTFILES)
+# Files to be cleaned
+CLEANFILES = testout.ppm testout.bmp testout.jpg testoutp.ppm testoutp.jpg \
+        testoutt.jpg
 
-dist-hook:
-	rm -rf `find $(distdir) -name .svn`
+# Install jconfig.h
+install-data-local:
+	$(mkinstalldirs) $(DESTDIR)$(includedir)
+	$(INSTALL_HEADER) jconfig.h $(DESTDIR)$(includedir)/jconfig.h
 
+# Uninstall jconfig.h
+uninstall-local:
+	rm -f $(DESTDIR)$(includedir)/jconfig.h
 
-if WITH_SIMD
-
-test: testclean all
-	./jpegut
-	./cjpeg -dct int -outfile testoutint.jpg $(srcdir)/testorig.ppm
-	./cjpeg -dct fast -opt -outfile testoutfst.jpg $(srcdir)/testorig.ppm
-	./cjpeg -dct float -outfile testoutflt.jpg $(srcdir)/testorig.ppm
-	cmp $(srcdir)/testimgint.jpg testoutint.jpg
-	cmp $(srcdir)/testimgfst.jpg testoutfst.jpg
-	cmp $(srcdir)/testimgflt.jpg testoutflt.jpg
-	./djpeg -dct int -fast -ppm -outfile testoutint.ppm $(srcdir)/testorig.jpg
-	./djpeg -dct fast -ppm -outfile testoutfst.ppm $(srcdir)/testorig.jpg
-	./djpeg -dct float -ppm -outfile testoutflt.ppm $(srcdir)/testorig.jpg
-	cmp $(srcdir)/testimgint.ppm testoutint.ppm
-	cmp $(srcdir)/testimgfst.ppm testoutfst.ppm
-	cmp $(srcdir)/testimgflt.ppm testoutflt.ppm
-	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
-	cmp $(srcdir)/testimg.bmp testout.bmp
-	./cjpeg -dct int -progressive -outfile testoutp.jpg $(srcdir)/testorig.ppm
-	cmp $(srcdir)/testimgp.jpg testoutp.jpg
-	./jpegtran -outfile testoutt.jpg testoutp.jpg
-	cmp $(srcdir)/testimgint.jpg testoutt.jpg
-
-else
-
-test: testclean all
-	./jpegut
-	./cjpeg -dct int -outfile testoutint.jpg $(srcdir)/testorig.ppm
-	./cjpeg -dct fast -opt -outfile testoutfst.jpg $(srcdir)/testorig.ppm
-	./cjpeg -dct float -outfile testoutflt.jpg $(srcdir)/testorig.ppm
-	cmp $(srcdir)/testimgint.jpg testoutint.jpg
-	cmp $(srcdir)/testimgfst.jpg testoutfst.jpg
-	cmp $(srcdir)/testimgflt-nosimd.jpg testoutflt.jpg
-	./djpeg -dct int -fast -ppm -outfile testoutint.ppm $(srcdir)/testorig.jpg
-	./djpeg -dct fast -ppm -outfile testoutfst.ppm $(srcdir)/testorig.jpg
-	./djpeg -dct float -ppm -outfile testoutflt.ppm $(srcdir)/testorig.jpg
-	cmp $(srcdir)/testimgint.ppm testoutint.ppm
-	cmp $(srcdir)/testimgfst.ppm testoutfst.ppm
-	cmp $(srcdir)/testorig.ppm testoutflt.ppm
-	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
-	cmp $(srcdir)/testimg.bmp testout.bmp
-	./cjpeg -dct int -progressive -outfile testoutp.jpg $(srcdir)/testorig.ppm
-	cmp $(srcdir)/testimgp.jpg testoutp.jpg
-	./jpegtran -outfile testoutt.jpg testoutp.jpg
-	cmp $(srcdir)/testimgint.jpg testoutt.jpg
-
-endif
-
-testclean:
+# Run tests
+test: check-local
+check-local:
 	rm -f testout*
-	rm -f *_GRAYQ[0-9]*.bmp
-	rm -f *_GRAYQ[0-9]*.ppm
-	rm -f *_GRAYQ[0-9]*.jpg
-	rm -f *_420Q[0-9]*.bmp
-	rm -f *_420Q[0-9]*.ppm
-	rm -f *_420Q[0-9]*.jpg
-	rm -f *_422Q[0-9]*.bmp
-	rm -f *_422Q[0-9]*.ppm
-	rm -f *_422Q[0-9]*.jpg
-	rm -f *_444Q[0-9]*.bmp
-	rm -f *_444Q[0-9]*.ppm
-	rm -f *_444Q[0-9]*.jpg
-
-rpm: all
-	sh $(srcdir)/release/makerpm ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${RPMARCH} ${srcdir}
-
-srpm: dist-gzip
-	sh $(srcdir)/release/makesrpm ${PACKAGE_NAME} ${VERSION} ${BUILD} ${srcdir}
-
-deb: all
-	sh $(srcdir)/release/makedpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${DEBARCH} ${srcdir}
-
-if X86_64
-
-udmg: all
-	sh $(srcdir)/release/makemacpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${srcdir} universal
-
-endif
-
-dmg: all
-	sh $(srcdir)/release/makemacpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} ${srcdir}
-
-if X86_64
-
-sunpkg: all
-	sh $(srcdir)/release/makesunpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${DEBARCH} ${srcdir} $(CC) $(CXX) combined
-
-nsi: all
-	makensis -nocd -DVERSION=$(VERSION) -DAPPNAME=libjpeg-turbo-gcc64 \
-		-DWLIBDIR=.libs -DWSRCDIR=$(srcdir) -DWBLDDIR=. -DWHDRDIR=. -DWIN64 \
-		-DPLATFORM="GCC 64-bit" -DGCC $(srcdir)/release/libjpeg-turbo.nsi
-
-else
-
-sunpkg: all
-	sh $(srcdir)/release/makesunpkg ${PACKAGE_NAME} ${VERSION} ${BUILD} \
-		${DEBARCH} ${srcdir} $(CC) $(CXX)
-
-nsi: all
-	makensis -nocd -DVERSION=$(VERSION) -DAPPNAME=libjpeg-turbo-gcc \
-		-DWLIBDIR=.libs -DWSRCDIR=$(srcdir) -DWBLDDIR=. -DWHDRDIR=. \
-		-DPLATFORM="GCC" -DGCC $(srcdir)/release/libjpeg-turbo.nsi
-
-endif
-
-cygwinpkg: all
-	sh $(srcdir)/release/makecygwinpkg ${PACKAGE_NAME} ${VERSION} ${srcdir}
+	./djpeg -dct int -ppm -outfile testout.ppm  $(srcdir)/testorig.jpg
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
+	./cjpeg -dct int -outfile testout.jpg  $(srcdir)/testimg.ppm
+	./djpeg -dct int -ppm -outfile testoutp.ppm $(srcdir)/testprog.jpg
+	./cjpeg -dct int -progressive -opt -outfile testoutp.jpg $(srcdir)/testimg.ppm
+	./jpegtran -outfile testoutt.jpg $(srcdir)/testprog.jpg
+	cmp $(srcdir)/testimg.ppm testout.ppm
+	cmp $(srcdir)/testimg.bmp testout.bmp
+	cmp $(srcdir)/testimg.jpg testout.jpg
+	cmp $(srcdir)/testimg.ppm testoutp.ppm
+	cmp $(srcdir)/testimgp.jpg testoutp.jpg
+	cmp $(srcdir)/testorig.jpg testoutt.jpg

README

@@ -1,31 +1,20 @@
-libjpeg-turbo note:  This is the legacy document from the original libjpeg v6b
-release, which is included for reference.  The Internet addresses given below
-are likely non-functional.  For more information about the libjpeg project,
-please see http://www.ijg.org.  For more information about libjpeg-turbo,
-please see http://libjpeg-turbo.virtualgl.org.
-
-
 The Independent JPEG Group's JPEG software
 ==========================================
 
-README for release 6b of 27-Mar-1998
+README for release 9c of 14-Jan-2018
 ====================================
 
-This distribution contains the sixth public release of the Independent JPEG
+This distribution contains the ninth public release of the Independent JPEG
 Group's free JPEG software.  You are welcome to redistribute this software and
 to use it for any purpose, subject to the conditions under LEGAL ISSUES, below.
 
-Serious users of this software (particularly those incorporating it into
-larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to
-our electronic mailing list.  Mailing list members are notified of updates
-and have a chance to participate in technical discussions, etc.
+This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone,
+Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson,
+Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers,
+and other members of the Independent JPEG Group.
 
-This software is the work of Tom Lane, Philip Gladstone, Jim Boucher,
-Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi,
-Guido Vollbeding, Ge' Weijers, and other members of the Independent JPEG
-Group.
-
-IJG is not affiliated with the official ISO JPEG standards committee.
+IJG is not affiliated with the ISO/IEC JTC1/SC29/WG1 standards committee
+(previously known as JPEG, together with ITU-T SG16).
 
 
 DOCUMENTATION ROADMAP
@@ -37,27 +26,27 @@ OVERVIEW            General description of JPEG and the IJG software.
 LEGAL ISSUES        Copyright, lack of warranty, terms of distribution.
 REFERENCES          Where to learn more about JPEG.
 ARCHIVE LOCATIONS   Where to find newer versions of this software.
-RELATED SOFTWARE    Other stuff you should get.
+ACKNOWLEDGMENTS     Special thanks.
 FILE FORMAT WARS    Software *not* to get.
 TO DO               Plans for future IJG releases.
 
 Other documentation files in the distribution are:
 
 User documentation:
-  install.doc       How to configure and install the IJG software.
-  usage.doc         Usage instructions for cjpeg, djpeg, jpegtran,
+  install.txt       How to configure and install the IJG software.
+  usage.txt         Usage instructions for cjpeg, djpeg, jpegtran,
                     rdjpgcom, and wrjpgcom.
-  *.1               Unix-style man pages for programs (same info as usage.doc).
-  wizard.doc        Advanced usage instructions for JPEG wizards only.
+  *.1               Unix-style man pages for programs (same info as usage.txt).
+  wizard.txt        Advanced usage instructions for JPEG wizards only.
   change.log        Version-to-version change highlights.
 Programmer and internal documentation:
-  libjpeg.doc       How to use the JPEG library in your own programs.
+  libjpeg.txt       How to use the JPEG library in your own programs.
   example.c         Sample code for calling the JPEG library.
-  structure.doc     Overview of the JPEG library's internal structure.
-  filelist.doc      Road map of IJG files.
-  coderules.doc     Coding style rules --- please read if you contribute code.
+  structure.txt     Overview of the JPEG library's internal structure.
+  filelist.txt      Road map of IJG files.
+  coderules.txt     Coding style rules --- please read if you contribute code.
 
-Please read at least the files install.doc and usage.doc.  Useful information
+Please read at least the files install.txt and usage.txt.  Some information
 can also be found in the JPEG FAQ (Frequently Asked Questions) article.  See
 ARCHIVE LOCATIONS below to find out where to obtain the FAQ article.
 
@@ -69,24 +58,15 @@ the order listed) before diving into the code.
 OVERVIEW
 ========
 
-This package contains C software to implement JPEG image compression and
-decompression.  JPEG (pronounced "jay-peg") is a standardized compression
-method for full-color and gray-scale images.  JPEG is intended for compressing
-"real-world" scenes; line drawings, cartoons and other non-realistic images
-are not its strong suit.  JPEG is lossy, meaning that the output image is not
-exactly identical to the input image.  Hence you must not use JPEG if you
-have to have identical output bits.  However, on typical photographic images,
-very good compression levels can be obtained with no visible change, and
-remarkably high compression levels are possible if you can tolerate a
-low-quality image.  For more details, see the references, or just experiment
-with various compression settings.
+This package contains C software to implement JPEG image encoding, decoding,
+and transcoding.  JPEG (pronounced "jay-peg") is a standardized compression
+method for full-color and grayscale images.
 
 This software implements JPEG baseline, extended-sequential, and progressive
 compression processes.  Provision is made for supporting all variants of these
 processes, although some uncommon parameter settings aren't implemented yet.
-For legal reasons, we are not distributing code for the arithmetic-coding
-variants of JPEG; see LEGAL ISSUES.  We have made no provision for supporting
-the hierarchical or lossless processes defined in the standard.
+We have made no provision for supporting the hierarchical or lossless
+processes defined in the standard.
 
 We provide a set of library routines for reading and writing JPEG image files,
 plus two sample applications "cjpeg" and "djpeg", which use the library to
@@ -98,10 +78,11 @@ considerable functionality beyond the bare JPEG coding/decoding capability;
 for example, the color quantization modules are not strictly part of JPEG
 decoding, but they are essential for output to colormapped file formats or
 colormapped displays.  These extra functions can be compiled out of the
-library if not required for a particular application.  We have also included
-"jpegtran", a utility for lossless transcoding between different JPEG
-processes, and "rdjpgcom" and "wrjpgcom", two simple applications for
-inserting and extracting textual comments in JFIF files.
+library if not required for a particular application.
+
+We have also included "jpegtran", a utility for lossless transcoding between
+different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple
+applications for inserting and extracting textual comments in JFIF files.
 
 The emphasis in designing this software has been on achieving portability and
 flexibility, while also making it fast enough to be useful.  In particular,
@@ -134,7 +115,7 @@ with respect to this software, its quality, accuracy, merchantability, or
 fitness for a particular purpose.  This software is provided "AS IS", and you,
 its user, assume the entire risk as to its quality and accuracy.
 
-This software is copyright (C) 1991-1998, Thomas G. Lane.
+This software is copyright (C) 1991-2018, Thomas G. Lane, Guido Vollbeding.
 All Rights Reserved except as specified below.
 
 Permission is hereby granted to use, copy, modify, and distribute this
@@ -165,47 +146,24 @@ commercial products, provided that all warranty or liability claims are
 assumed by the product vendor.
 
 
-ansi2knr.c is included in this distribution by permission of L. Peter Deutsch,
-sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA.
-ansi2knr.c is NOT covered by the above copyright and conditions, but instead
-by the usual distribution terms of the Free Software Foundation; principally,
-that you must include source code if you redistribute it.  (See the file
-ansi2knr.c for full details.)  However, since ansi2knr.c is not needed as part
-of any program generated from the IJG code, this does not limit you more than
-the foregoing paragraphs do.
-
 The Unix configuration script "configure" was produced with GNU Autoconf.
 It is copyright by the Free Software Foundation but is freely distributable.
 The same holds for its supporting scripts (config.guess, config.sub,
-ltconfig, ltmain.sh).  Another support script, install-sh, is copyright
-by M.I.T. but is also freely distributable.
-
-It appears that the arithmetic coding option of the JPEG spec is covered by
-patents owned by IBM, AT&T, and Mitsubishi.  Hence arithmetic coding cannot
-legally be used without obtaining one or more licenses.  For this reason,
-support for arithmetic coding has been removed from the free JPEG software.
-(Since arithmetic coding provides only a marginal gain over the unpatented
-Huffman mode, it is unlikely that very many implementations will support it.)
-So far as we are aware, there are no patent restrictions on the remaining
-code.
+ltmain.sh).  Another support script, install-sh, is copyright by X Consortium
+but is also freely distributable.
 
 The IJG distribution formerly included code to read and write GIF files.
-To avoid entanglement with the Unisys LZW patent, GIF reading support has
-been removed altogether, and the GIF writer has been simplified to produce
-"uncompressed GIFs".  This technique does not use the LZW algorithm; the
-resulting GIF files are larger than usual, but are readable by all standard
-GIF decoders.
-
-We are required to state that
-    "The Graphics Interchange Format(c) is the Copyright property of
-    CompuServe Incorporated.  GIF(sm) is a Service Mark property of
-    CompuServe Incorporated."
+To avoid entanglement with the Unisys LZW patent (now expired), GIF reading
+support has been removed altogether, and the GIF writer has been simplified
+to produce "uncompressed GIFs".  This technique does not use the LZW
+algorithm; the resulting GIF files are larger than usual, but are readable
+by all standard GIF decoders.
 
 
 REFERENCES
 ==========
 
-We highly recommend reading one or more of these references before trying to
+We recommend reading one or more of these references before trying to
 understand the innards of the JPEG software.
 
 The best short technical introduction to the JPEG compression algorithm is
@@ -213,8 +171,8 @@ The best short technical introduction to the JPEG compression algorithm is
 	Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.
 (Adjacent articles in that issue discuss MPEG motion picture compression,
 applications of JPEG, and related topics.)  If you don't have the CACM issue
-handy, a PostScript file containing a revised version of Wallace's article is
-available at ftp://ftp.uu.net/graphics/jpeg/wallace.ps.gz.  The file (actually
+handy, a PDF file containing a revised version of Wallace's article is
+available at http://www.ijg.org/files/Wallace.JPEG.pdf.  The file (actually
 a preprint for an article that appeared in IEEE Trans. Consumer Electronics)
 omits the sample images that appeared in CACM, but it includes corrections
 and some added material.  Note: the Wallace article is copyright ACM and IEEE,
@@ -229,82 +187,70 @@ code but don't know much about data compression in general.  The book's JPEG
 sample code is far from industrial-strength, but when you are ready to look
 at a full implementation, you've got one here...
 
-The best full description of JPEG is the textbook "JPEG Still Image Data
-Compression Standard" by William B. Pennebaker and Joan L. Mitchell, published
-by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.  Price US$59.95, 638 pp.
-The book includes the complete text of the ISO JPEG standards (DIS 10918-1
-and draft DIS 10918-2).  This is by far the most complete exposition of JPEG
-in existence, and we highly recommend it.
+The best currently available description of JPEG is the textbook "JPEG Still
+Image Data Compression Standard" by William B. Pennebaker and Joan L.
+Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1.
+Price US$59.95, 638 pp.  The book includes the complete text of the ISO JPEG
+standards (DIS 10918-1 and draft DIS 10918-2).
+Although this is by far the most detailed and comprehensive exposition of
+JPEG publicly available, we point out that it is still missing an explanation
+of the most essential properties and algorithms of the underlying DCT
+technology.
+If you think that you know about DCT-based JPEG after reading this book,
+then you are in delusion.  The real fundamentals and corresponding potential
+of DCT-based JPEG are not publicly known so far, and that is the reason for
+all the mistaken developments taking place in the image coding domain.
 
-The JPEG standard itself is not available electronically; you must order a
-paper copy through ISO or ITU.  (Unless you feel a need to own a certified
-official copy, we recommend buying the Pennebaker and Mitchell book instead;
-it's much cheaper and includes a great deal of useful explanatory material.)
-In the USA, copies of the standard may be ordered from ANSI Sales at (212)
-642-4900, or from Global Engineering Documents at (800) 854-7179.  (ANSI
-doesn't take credit card orders, but Global does.)  It's not cheap: as of
-1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7%
-shipping/handling.  The standard is divided into two parts, Part 1 being the
-actual specification, while Part 2 covers compliance testing methods.  Part 1
-is titled "Digital Compression and Coding of Continuous-tone Still Images,
+The original JPEG standard is divided into two parts, Part 1 being the actual
+specification, while Part 2 covers compliance testing methods.  Part 1 is
+titled "Digital Compression and Coding of Continuous-tone Still Images,
 Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS
 10918-1, ITU-T T.81.  Part 2 is titled "Digital Compression and Coding of
 Continuous-tone Still Images, Part 2: Compliance testing" and has document
 numbers ISO/IEC IS 10918-2, ITU-T T.83.
-
-Some extensions to the original JPEG standard are defined in JPEG Part 3,
-a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84.  IJG
-currently does not support any Part 3 extensions.
+IJG JPEG 8 introduced an implementation of the JPEG SmartScale extension
+which is specified in two documents:  A contributed document at ITU and ISO
+with title "ITU-T JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced
+Image Coding", April 2006, Geneva, Switzerland.  The latest version of this
+document is Revision 3.  And a contributed document ISO/IEC JTC1/SC29/WG1 N
+5799 with title "Evolution of JPEG", June/July 2011, Berlin, Germany.
+IJG JPEG 9 introduces a reversible color transform for improved lossless
+compression which is described in a contributed document ISO/IEC JTC1/SC29/
+WG1 N 6080 with title "JPEG 9 Lossless Coding", June/July 2012, Paris,
+France.
 
 The JPEG standard does not specify all details of an interchangeable file
-format.  For the omitted details we follow the "JFIF" conventions, revision
-1.02.  A copy of the JFIF spec is available from:
-	Literature Department
-	C-Cube Microsystems, Inc.
-	1778 McCarthy Blvd.
-	Milpitas, CA 95035
-	phone (408) 944-6300,  fax (408) 944-6314
-A PostScript version of this document is available by FTP at
-ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz.  There is also a plain text
-version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt.gz, but it is missing
-the figures.
+format.  For the omitted details we follow the "JFIF" conventions, version 2.
+JFIF version 1 has been adopted as Recommendation ITU-T T.871 (05/2011) :
+Information technology - Digital compression and coding of continuous-tone
+still images: JPEG File Interchange Format (JFIF).  It is available as a
+free download in PDF file format from http://www.itu.int/rec/T-REC-T.871.
+A PDF file of the older JFIF document is available at
+http://www.w3.org/Graphics/JPEG/jfif3.pdf.
 
 The TIFF 6.0 file format specification can be obtained by FTP from
 ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz.  The JPEG incorporation scheme
 found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems.
 IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6).
 Instead, we recommend the JPEG design proposed by TIFF Technical Note #2
-(Compression tag 7).  Copies of this Note can be obtained from ftp.sgi.com or
-from ftp://ftp.uu.net/graphics/jpeg/.  It is expected that the next revision
+(Compression tag 7).  Copies of this Note can be obtained from
+http://www.ijg.org/files/.  It is expected that the next revision
 of the TIFF spec will replace the 6.0 JPEG design with the Note's design.
 Although IJG's own code does not support TIFF/JPEG, the free libtiff library
-uses our library to implement TIFF/JPEG per the Note.  libtiff is available
-from ftp://ftp.sgi.com/graphics/tiff/.
+uses our library to implement TIFF/JPEG per the Note.
 
 
 ARCHIVE LOCATIONS
 =================
 
-The "official" archive site for this software is ftp.uu.net (Internet
-address 192.48.96.9).  The most recent released version can always be found
-there in directory graphics/jpeg.  This particular version will be archived
-as ftp://ftp.uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz.  If you don't have
-direct Internet access, UUNET's archives are also available via UUCP; contact
-help@uunet.uu.net for information on retrieving files that way.
+The "official" archive site for this software is www.ijg.org.
+The most recent released version can always be found there in
+directory "files".  This particular version will be archived as
+http://www.ijg.org/files/jpegsrc.v9c.tar.gz, and in Windows-compatible
+"zip" archive format as http://www.ijg.org/files/jpegsr9c.zip.
 
-Numerous Internet sites maintain copies of the UUNET files.  However, only
-ftp.uu.net is guaranteed to have the latest official version.
-
-You can also obtain this software in DOS-compatible "zip" archive format from
-the SimTel archives (ftp://ftp.simtel.net/pub/simtelnet/msdos/graphics/), or
-on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12
-"JPEG Tools".  Again, these versions may sometimes lag behind the ftp.uu.net
-release.
-
-The JPEG FAQ (Frequently Asked Questions) article is a useful source of
-general information about JPEG.  It is updated constantly and therefore is
-not included in this distribution.  The FAQ is posted every two weeks to
-Usenet newsgroups comp.graphics.misc, news.answers, and other groups.
+The JPEG FAQ (Frequently Asked Questions) article is a source of some
+general information about JPEG.
 It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/
 and other news.answers archive sites, including the official news.answers
 archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/.
@@ -314,79 +260,119 @@ with body
 	send usenet/news.answers/jpeg-faq/part2
 
 
-RELATED SOFTWARE
-================
+ACKNOWLEDGMENTS
+===============
 
-Numerous viewing and image manipulation programs now support JPEG.  (Quite a
-few of them use this library to do so.)  The JPEG FAQ described above lists
-some of the more popular free and shareware viewers, and tells where to
-obtain them on Internet.
+Thank to Juergen Bruder for providing me with a copy of the common DCT
+algorithm article, only to find out that I had come to the same result
+in a more direct and comprehensible way with a more generative approach.
 
-If you are on a Unix machine, we highly recommend Jef Poskanzer's free
-PBMPLUS software, which provides many useful operations on PPM-format image
-files.  In particular, it can convert PPM images to and from a wide range of
-other formats, thus making cjpeg/djpeg considerably more useful.  The latest
-version is distributed by the NetPBM group, and is available from numerous
-sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/packages/NetPBM/.
-Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is;
-you are likely to have difficulty making it work on any non-Unix machine.
+Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the
+ITU JPEG (Study Group 16) meeting in Geneva, Switzerland.
 
-A different free JPEG implementation, written by the PVRG group at Stanford,
-is available from ftp://havefun.stanford.edu/pub/jpeg/.  This program
-is designed for research and experimentation rather than production use;
-it is slower, harder to use, and less portable than the IJG code, but it
-is easier to read and modify.  Also, the PVRG code supports lossless JPEG,
-which we do not.  (On the other hand, it doesn't do progressive JPEG.)
+Thank to Thomas Wiegand and Gary Sullivan for inviting me to the
+Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland.
+
+Thank to Thomas Richter and Daniel Lee for inviting me to the
+ISO/IEC JTC1/SC29/WG1 (previously known as JPEG, together with ITU-T SG16)
+meeting in Berlin, Germany.
+
+Thank to John Korejwa and Massimo Ballerini for inviting me to
+fruitful consultations in Boston, MA and Milan, Italy.
+
+Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther
+Maier-Gerber, Walter Stoeber, Fred Schmitz, and Norbert Braunagel
+for corresponding business development.
+
+Thank to Nico Zschach and Dirk Stelling of the technical support team
+at the Digital Images company in Halle for providing me with extra
+equipment for configuration tests.
+
+Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful
+communication about JPEG configuration in Sigma Photo Pro software.
+
+Thank to Andrew Finkenstadt for hosting the ijg.org site.
+
+Thank to Thomas G. Lane for the original design and development of
+this singular software package.
+
+Thank to Lars Goehler, Andreas Heinecke, Sebastian Fuss, Yvonne Roebert,
+Andrej Werner, and Ulf-Dietrich Braumann for support and public relations.
 
 
 FILE FORMAT WARS
 ================
 
-Some JPEG programs produce files that are not compatible with our library.
-The root of the problem is that the ISO JPEG committee failed to specify a
-concrete file format.  Some vendors "filled in the blanks" on their own,
-creating proprietary formats that no one else could read.  (For example, none
-of the early commercial JPEG implementations for the Macintosh were able to
-exchange compressed files.)
+The ISO/IEC JTC1/SC29/WG1 standards committee (previously known as JPEG,
+together with ITU-T SG16) currently promotes different formats containing
+the name "JPEG" which is misleading because these formats are incompatible
+with original DCT-based JPEG and are based on faulty technologies.
+IJG therefore does not and will not support such momentary mistakes
+(see REFERENCES).
+There exist also distributions under the name "OpenJPEG" promoting such
+kind of formats which is misleading because they don't support original
+JPEG images.
+We have no sympathy for the promotion of inferior formats.  Indeed, one of
+the original reasons for developing this free software was to help force
+convergence on common, interoperable format standards for JPEG files.
+Don't use an incompatible file format!
+(In any case, our decoder will remain capable of reading existing JPEG
+image files indefinitely.)
 
-The file format we have adopted is called JFIF (see REFERENCES).  This format
-has been agreed to by a number of major commercial JPEG vendors, and it has
-become the de facto standard.  JFIF is a minimal or "low end" representation.
-We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF
-Technical Note #2) for "high end" applications that need to record a lot of
-additional data about an image.  TIFF/JPEG is fairly new and not yet widely
-supported, unfortunately.
+The ISO committee pretends to be "responsible for the popular JPEG" in their
+public reports which is not true because they don't respond to actual
+requirements for the maintenance of the original JPEG specification.
+Furthermore, the ISO committee pretends to "ensure interoperability" with
+their standards which is not true because their "standards" support only
+application-specific and proprietary use cases and contain mathematically
+incorrect code.
 
-The upcoming JPEG Part 3 standard defines a file format called SPIFF.
-SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should
-be able to read the most common variant of SPIFF.  SPIFF has some technical
-advantages over JFIF, but its major claim to fame is simply that it is an
-official standard rather than an informal one.  At this point it is unclear
-whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto
-standard.  IJG intends to support SPIFF once the standard is frozen, but we
-have not decided whether it should become our default output format or not.
-(In any case, our decoder will remain capable of reading JFIF indefinitely.)
+There are currently different distributions in circulation containing the
+name "libjpeg" which is misleading because they don't have the features and
+are incompatible with formats supported by actual IJG libjpeg distributions.
+One of those fakes is released by members of the ISO committee and just uses
+the name of libjpeg for misdirection of people, similar to the abuse of the
+name JPEG as described above, while having nothing in common with actual IJG
+libjpeg distributions and containing mathematically incorrect code.
+The other one claims to be a "derivative" or "fork" of the original libjpeg,
+but violates the license conditions as described under LEGAL ISSUES above
+and violates basic C programming properties.
+We have no sympathy for the release of misleading, incorrect and illegal
+distributions derived from obsolete code bases.
+Don't use an obsolete code base!
 
-Various proprietary file formats incorporating JPEG compression also exist.
-We have little or no sympathy for the existence of these formats.  Indeed,
-one of the original reasons for developing this free software was to help
-force convergence on common, open format standards for JPEG files.  Don't
-use a proprietary file format!
+According to the UCC (Uniform Commercial Code) law, IJG has the lawful and
+legal right to foreclose on certain standardization bodies and other
+institutions or corporations that knowingly perform substantial and
+systematic deceptive acts and practices, fraud, theft, and damaging of the
+value of the people of this planet without their knowing, willing and
+intentional consent.
+The titles, ownership, and rights of these institutions and all their assets
+are now duly secured and held in trust for the free people of this planet.
+People of the planet, on every country, may have a financial interest in
+the assets of these former principals, agents, and beneficiaries of the
+foreclosed institutions and corporations.
+IJG asserts what is: that each man, woman, and child has unalienable value
+and rights granted and deposited in them by the Creator and not any one of
+the people is subordinate to any artificial principality, corporate fiction
+or the special interest of another without their appropriate knowing,
+willing and intentional consent made by contract or accommodation agreement.
+IJG expresses that which already was.
+The people have already determined and demanded that public administration
+entities, national governments, and their supporting judicial systems must
+be fully transparent, accountable, and liable.
+IJG has secured the value for all concerned free people of the planet.
+
+A partial list of foreclosed institutions and corporations ("Hall of Shame")
+is currently prepared and will be published later.
 
 
 TO DO
 =====
 
-The major thrust for v7 will probably be improvement of visual quality.
-The current method for scaling the quantization tables is known not to be
-very good at low Q values.  We also intend to investigate block boundary
-smoothing, "poor man's variable quantization", and other means of improving
-quality-vs-file-size performance without sacrificing compatibility.
+Version 9 is the second release of a new generation JPEG standard
+to overcome the limitations of the original JPEG specification,
+and is the first true source reference JPEG codec.
+More features are being prepared for coming releases...
 
-In future versions, we are considering supporting some of the upcoming JPEG
-Part 3 extensions --- principally, variable quantization and the SPIFF file
-format.
-
-As always, speeding things up is of great interest.
-
-Please send bug reports, offers of help, etc. to jpeg-info@uunet.uu.net.
+Please send bug reports, offers of help, etc. to jpeg-info@jpegclub.org.

README-turbo.txt

@@ -1,207 +0,0 @@
-*******************************************************************************
-**     Background
-*******************************************************************************
-
-libjpeg-turbo is a high-speed version of libjpeg for x86 and x86-64 processors
-which uses SIMD instructions (MMX, SSE2, etc.) to accelerate baseline JPEG
-compression and decompression.  libjpeg-turbo is generally 2-4x as fast
-as the unmodified version of libjpeg, all else being equal.
-
-libjpeg-turbo was originally based on libjpeg/SIMD by Miyasaka Masaru, but
-the TigerVNC and VirtualGL projects made numerous enhancements to the codec,
-including improved support for Mac OS X, 64-bit support, support for 32-bit
-and big endian pixel formats, accelerated Huffman encoding/decoding, and
-various bug fixes.  The goal was to produce a fully open source codec that
-could replace the partially closed source TurboJPEG/IPP codec used by VirtualGL
-and TurboVNC.  libjpeg-turbo generally performs in the range of 80-120% of
-TurboJPEG/IPP.  It is faster in some areas but slower in others.
-
-It was decided to split libjpeg-turbo into a separate SDK so that other
-projects could take advantage of this technology.  The libjpeg-turbo shared
-libraries can be used as drop-in replacements for libjpeg on most systems.
-
-
-*******************************************************************************
-**     License
-*******************************************************************************
-
-Some of the optimizations to the Huffman encoder (jchuff.c) and decoder
-(jdhuff.c) were borrowed from VirtualGL, and thus any distribution of
-libjpeg-turbo which includes those optimizations must, as a whole, be subject
-to the terms of the wxWindows Library Licence, Version 3.1.  A copy of this
-license can be found in this directory under LICENSE.txt.  The wxWindows
-Library License is based on the LGPL but includes provisions which allow the
-Library to be statically linked into proprietary libraries and applications
-without requiring the resulting binaries to be distributed under the terms of
-the LGPL.
-
-The rest of the source code, apart from the Huffman codec optimizations, falls
-under a less restrictive, BSD-style license (see README.)  You can choose to
-distribute libjpeg-turbo, as a whole, under this BSD-style license by simply
-replacing the optimized jchuff.c and jdhuff.c with their unoptimized
-counterparts from the libjpeg v6b source.
-
-
-*******************************************************************************
-**     Using libjpeg-turbo
-*******************************************************************************
-
-=============================
-Replacing libjpeg at Run Time
-=============================
-
-If a Unix application is dynamically linked with libjpeg, then you can replace
-libjpeg with libjpeg-turbo at run time by manipulating the LD_LIBRARY_PATH.
-For instance:
-
-  [Using libjpeg]
-  > time cjpeg <vgl_5674_0098.ppm >vgl_5674_0098.jpg
-  real  0m0.392s
-  user  0m0.074s
-  sys   0m0.020s
-
-  [Using libjpeg-turbo]
-  > export LD_LIBRARY_PATH=/opt/libjpeg-turbo/{lib}:$LD_LIBRARY_PATH
-  > time cjpeg <vgl_5674_0098.ppm >vgl_5674_0098.jpg
-  real  0m0.109s
-  user  0m0.029s
-  sys   0m0.010s
-
-NOTE: {lib} can be lib, lib32, lib64, or lib/64, depending on the O/S and
-architecture.
-
-System administrators can also replace the libjpeg sym links in /usr/{lib} with
-links to the libjpeg dynamic library located in /opt/libjpeg-turbo/{lib}.  This
-will effectively accelerate every dynamically linked libjpeg application on the
-system.
-
-The Windows distribution of the libjpeg-turbo SDK installs jpeg62.dll into
-c:\libjpeg-turbo\bin, and the PATH environment variable can be modified such
-that this directory is searched before any others that might contain
-jpeg62.dll.  However, if jpeg62.dll also exists in an application's install
-directory, then Windows will load the application's version of it first.  Thus,
-if an application ships with jpeg62.dll, then back up the application's version
-of jpeg62.dll and copy c:\libjpeg-turbo\bin\jpeg62.dll into the application's
-install directory to accelerate it.
-
-The version of jpeg62.dll distributed in the libjpeg-turbo SDK requires the
-Visual C++ 2008 C run time DLL (msvcr90.dll).  This library ships with more
-recent versions of Windows, but users of older versions can obtain it from the
-Visual C++ 2008 Redistributable Package, which is available as a free download
-from Microsoft's web site.
-
-NOTE:  Features of libjpeg which require passing a C run time structure, such
-as a file handle, from an application to libjpeg will probably not work with
-the distributed version of jpeg62.dll unless the application is also built to
-use the Visual C++ 2008 C run time DLL.  In particular, this affects
-jpeg_stdio_dest() and jpeg_stdio_src().
-
-Mac applications typically embed their own copies of libjpeg.62.dylib inside
-the (hidden) application bundle, so it is not possible to globally replace
-libjpeg on OS X systems.  If an application uses a shared library version of
-libjpeg, then it may be possible to replace the application's version of it.
-This would generally involve copying libjpeg.62.dylib into the appropriate
-place in the application bundle and using install_name_tool to repoint the
-dylib to the new directory.  This requires an advanced knowledge of OS X and
-would not survive an upgrade or a re-install of the application.  Thus, it is
-not recommended for most users.
-
-=======================
-Replacing TurboJPEG/IPP
-=======================
-
-libjpeg-turbo is a drop-in replacement for the TurboJPEG/IPP SDK used by
-VirtualGL 2.1.x and TurboVNC 0.6 (and prior.)  libjpeg-turbo contains a wrapper
-library (TurboJPEG/OSS) that emulates the TurboJPEG API using libjpeg-turbo
-instead of the closed source Intel Performance Primitives.  You can replace the
-TurboJPEG/IPP package on Linux systems with the libjpeg-turbo package in order
-to make existing releases of VirtualGL 2.1.x and TurboVNC use the new codec at
-run time.  Note that the 64-bit libjpeg-turbo packages contain only 64-bit
-binaries, whereas the TurboJPEG/IPP 64-bit packages contained both 64-bit and
-32-bit binaries.  Thus, to replace a TurboJPEG/IPP 64-bit package, install
-both the 64-bit and 32-bit versions of libjpeg-turbo.
-
-You can also build the VirtualGL 2.1.x and TurboVNC 0.6 source code with
-the libjpeg-turbo SDK instead of TurboJPEG/IPP.  It should work identically.
-libjpeg-turbo also includes static library versions of TurboJPEG/OSS, which
-are used to build TurboVNC 1.0 and later.
-
-========================================
-Using libjpeg-turbo in Your Own Programs
-========================================
-
-For the most part, libjpeg-turbo should work identically to libjpeg, so in
-most cases, an application can be built against libjpeg and then run against
-libjpeg-turbo.  On Unix systems, you can build against libjpeg-turbo instead
-of libjpeg by setting
-
-  CPATH=/opt/libjpeg-turbo/include
-  and
-  LIBRARY_PATH=/opt/libjpeg-turbo/{lib}
-
-({lib} = lib32 or lib64, depending on whether you are building a 32-bit or a
-64-bit application.)
-
-If using Cygwin, then set
-
-  CPATH=/cygdrive/c/libjpeg-turbo-gcc[64]/include
-  and
-  LIBRARY_PATH=/cygdrive/c/libjpeg-turbo-gcc[64]/lib
-
-If using MinGW, then set
-
-  CPATH=/c/libjpeg-turbo-gcc[64]/include
-  and
-  LIBRARY_PATH=/c/libjpeg-turbo-gcc[64]/lib
-
-Building against libjpeg-turbo is useful, for instance, if you want to build an
-application that leverages the libjpeg-turbo colorspace extensions (see below.)
-On Linux and Solaris systems, you would still need to manipulate the
-LD_LIBRARY_PATH or sym links appropriately to use libjpeg-turbo at run time.
-On such systems, you can pass -R /opt/libjpeg-turbo/{lib} to the linker to
-force the use of libjpeg-turbo at run time rather than libjpeg (also useful if
-you want to leverage the colorspace extensions), or you can link against the
-libjpeg-turbo static library.
-
-To force a Linux, Solaris, or MinGW application to link against the static
-version of libjpeg-turbo, you can use the following linker options:
-
-  -Wl,-Bstatic -ljpeg -Wl,-Bdynamic
-
-On OS X, simply add /opt/libjpeg-turbo/lib/libjpeg.a to the linker command
-line (this also works on Linux and Solaris.)
-
-To build Visual C++ applications using libjpeg-turbo, add
-c:\libjpeg-turbo[64]\include to your system or user INCLUDE environment
-variable and c:\libjpeg-turbo[64]\lib to your system or user LIB environment
-variable, and then link against either jpeg.lib (to use jpeg62.dll) or
-jpeg-static.lib (to use the static version of libjpeg-turbo.)
-
-=====================
-Colorspace Extensions
-=====================
-
-libjpeg-turbo includes extensions which allow JPEG images to be compressed
-directly from (and decompressed directly to) buffers which use BGR, BGRA,
-RGBA, ABGR, and ARGB pixel ordering.  This is implemented with six new
-colorspace constants:
-
-  JCS_EXT_RGB   /* red/green/blue */
-  JCS_EXT_RGBX  /* red/green/blue/x */
-  JCS_EXT_BGR   /* blue/green/red */
-  JCS_EXT_BGRX  /* blue/green/red/x */
-  JCS_EXT_XBGR  /* x/blue/green/red */
-  JCS_EXT_XRGB  /* x/red/green/blue */
-
-Setting cinfo.in_color_space (compression) or cinfo.out_color_space
-(decompression) to one of these values will cause libjpeg-turbo to read the
-red, green, and blue values from (or write them to) the appropriate position in
-the pixel when YUV conversion is performed.
-
-Your application can check for the existence of these extensions at compile
-time with:
-
-  #ifdef JCS_EXTENSIONS
-
-At run time, attempting to use these extensions with a version of libjpeg
-that doesn't support them will result in a "Bogus input colorspace" error.

acinclude.m4

@@ -1,136 +0,0 @@
-# AC_PROG_NASM
-# --------------------------
-# Check that NASM exists and determine flags
-AC_DEFUN([AC_PROG_NASM],[
-
-AC_CHECK_PROGS(NASM, [nasm nasmw])
-test -z "$NASM" && AC_MSG_ERROR([no nasm (Netwide Assembler) found])
-
-AC_MSG_CHECKING([for object file format of host system])
-case "$host_os" in
-  cygwin* | mingw* | pw32* | interix*)
-    case "$host_cpu" in
-      x86_64)
-        objfmt='Win64-COFF'
-        ;;
-      *)
-        objfmt='Win32-COFF'
-        ;;
-    esac
-  ;;
-  msdosdjgpp* | go32*)
-    objfmt='COFF'
-  ;;
-  os2-emx*)			# not tested
-    objfmt='MSOMF'		# obj
-  ;;
-  linux*coff* | linux*oldld*)
-    objfmt='COFF'		# ???
-  ;;
-  linux*aout*)
-    objfmt='a.out'
-  ;;
-  linux*)
-    case "$host_cpu" in
-      x86_64)
-        objfmt='ELF64'
-        ;;
-      *)
-        objfmt='ELF'
-        ;;
-    esac
-  ;;
-  freebsd* | netbsd* | openbsd*)
-    if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
-      objfmt='BSD-a.out'
-    else
-      case "$host_cpu" in
-        x86_64 | amd64)
-          objfmt='ELF64'
-          ;;
-        *)
-          objfmt='ELF'
-          ;;
-      esac
-    fi
-  ;;
-  solaris* | sunos* | sysv* | sco*)
-    case "$host_cpu" in
-      x86_64)
-        objfmt='ELF64'
-        ;;
-      *)
-        objfmt='ELF'
-        ;;
-    esac
-  ;;
-  darwin* | rhapsody* | nextstep* | openstep* | macos*)
-    case "$host_cpu" in
-      x86_64)
-        objfmt='Mach-O64'
-        ;;
-      *)
-        objfmt='Mach-O'
-        ;;
-    esac
-  ;;
-  *)
-    objfmt='ELF ?'
-  ;;
-esac
-
-AC_MSG_RESULT([$objfmt])
-if test "$objfmt" = 'ELF ?'; then
-  objfmt='ELF'
-  AC_MSG_WARN([unexpected host system. assumed that the format is $objfmt.])
-fi
-
-AC_MSG_CHECKING([for object file format specifier (NAFLAGS) ])
-case "$objfmt" in
-  MSOMF)      NAFLAGS='-fobj -DOBJ32';;
-  Win32-COFF) NAFLAGS='-fwin32 -DWIN32';;
-  Win64-COFF) NAFLAGS='-fwin64 -DWIN64 -D__x86_64__';;
-  COFF)       NAFLAGS='-fcoff -DCOFF';;
-  a.out)      NAFLAGS='-faout -DAOUT';;
-  BSD-a.out)  NAFLAGS='-faoutb -DAOUT';;
-  ELF)        NAFLAGS='-felf -DELF';;
-  ELF64)      NAFLAGS='-felf64 -DELF -D__x86_64__';;
-  RDF)        NAFLAGS='-frdf -DRDF';;
-  Mach-O)     NAFLAGS='-fmacho -DMACHO';;
-  Mach-O64)   NAFLAGS='-fmacho64 -DMACHO -D__x86_64__';;
-esac
-AC_MSG_RESULT([$NAFLAGS])
-AC_SUBST([NAFLAGS])
-
-AC_MSG_CHECKING([whether the assembler ($NASM $NAFLAGS) works])
-cat > conftest.asm <<EOF
-[%line __oline__ "configure"
-        section .text
-        global  _main,main
-_main:
-main:   xor     eax,eax
-        ret
-]EOF
-try_nasm='$NASM $NAFLAGS -o conftest.o conftest.asm'
-if AC_TRY_EVAL(try_nasm) && test -s conftest.o; then
-  AC_MSG_RESULT(yes)
-else
-  echo "configure: failed program was:" >&AC_FD_CC
-  cat conftest.asm >&AC_FD_CC
-  rm -rf conftest*
-  AC_MSG_RESULT(no)
-  AC_MSG_ERROR([installation or configuration problem: assembler cannot create object files.])
-fi
-
-AC_MSG_CHECKING([whether the linker accepts assembler output])
-try_nasm='${CC-cc} -o conftest${ac_exeext} $LDFLAGS conftest.o $LIBS 1>&AC_FD_CC'
-if AC_TRY_EVAL(try_nasm) && test -s conftest${ac_exeext}; then
-  rm -rf conftest*
-  AC_MSG_RESULT(yes)
-else
-  rm -rf conftest*
-  AC_MSG_RESULT(no)
-  AC_MSG_ERROR([configuration problem: maybe object file format mismatch.])
-fi
-
-])

ar-lib

@@ -0,0 +1,270 @@
+#! /bin/sh
+# Wrapper for Microsoft lib.exe
+
+me=ar-lib
+scriptversion=2012-03-01.08; # UTC
+
+# Copyright (C) 2010-2017 Free Software Foundation, Inc.
+# Written by Peter Rosin <peda@lysator.liu.se>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+
+# func_error message
+func_error ()
+{
+  echo "$me: $1" 1>&2
+  exit 1
+}
+
+file_conv=
+
+# func_file_conv build_file
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv in
+	mingw)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_at_file at_file operation archive
+# Iterate over all members in AT_FILE performing OPERATION on ARCHIVE
+# for each of them.
+# When interpreting the content of the @FILE, do NOT use func_file_conv,
+# since the user would need to supply preconverted file names to
+# binutils ar, at least for MinGW.
+func_at_file ()
+{
+  operation=$2
+  archive=$3
+  at_file_contents=`cat "$1"`
+  eval set x "$at_file_contents"
+  shift
+
+  for member
+  do
+    $AR -NOLOGO $operation:"$member" "$archive" || exit $?
+  done
+}
+
+case $1 in
+  '')
+     func_error "no command.  Try '$0 --help' for more information."
+     ;;
+  -h | --h*)
+    cat <<EOF
+Usage: $me [--help] [--version] PROGRAM ACTION ARCHIVE [MEMBER...]
+
+Members may be specified in a file named with @FILE.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "$me, version $scriptversion"
+    exit $?
+    ;;
+esac
+
+if test $# -lt 3; then
+  func_error "you must specify a program, an action and an archive"
+fi
+
+AR=$1
+shift
+while :
+do
+  if test $# -lt 2; then
+    func_error "you must specify a program, an action and an archive"
+  fi
+  case $1 in
+    -lib | -LIB \
+    | -ltcg | -LTCG \
+    | -machine* | -MACHINE* \
+    | -subsystem* | -SUBSYSTEM* \
+    | -verbose | -VERBOSE \
+    | -wx* | -WX* )
+      AR="$AR $1"
+      shift
+      ;;
+    *)
+      action=$1
+      shift
+      break
+      ;;
+  esac
+done
+orig_archive=$1
+shift
+func_file_conv "$orig_archive"
+archive=$file
+
+# strip leading dash in $action
+action=${action#-}
+
+delete=
+extract=
+list=
+quick=
+replace=
+index=
+create=
+
+while test -n "$action"
+do
+  case $action in
+    d*) delete=yes  ;;
+    x*) extract=yes ;;
+    t*) list=yes    ;;
+    q*) quick=yes   ;;
+    r*) replace=yes ;;
+    s*) index=yes   ;;
+    S*)             ;; # the index is always updated implicitly
+    c*) create=yes  ;;
+    u*)             ;; # TODO: don't ignore the update modifier
+    v*)             ;; # TODO: don't ignore the verbose modifier
+    *)
+      func_error "unknown action specified"
+      ;;
+  esac
+  action=${action#?}
+done
+
+case $delete$extract$list$quick$replace,$index in
+  yes,* | ,yes)
+    ;;
+  yesyes*)
+    func_error "more than one action specified"
+    ;;
+  *)
+    func_error "no action specified"
+    ;;
+esac
+
+if test -n "$delete"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  for member
+  do
+    case $1 in
+      @*)
+        func_at_file "${1#@}" -REMOVE "$archive"
+        ;;
+      *)
+        func_file_conv "$1"
+        $AR -NOLOGO -REMOVE:"$file" "$archive" || exit $?
+        ;;
+    esac
+  done
+
+elif test -n "$extract"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  if test $# -gt 0; then
+    for member
+    do
+      case $1 in
+        @*)
+          func_at_file "${1#@}" -EXTRACT "$archive"
+          ;;
+        *)
+          func_file_conv "$1"
+          $AR -NOLOGO -EXTRACT:"$file" "$archive" || exit $?
+          ;;
+      esac
+    done
+  else
+    $AR -NOLOGO -LIST "$archive" | sed -e 's/\\/\\\\/g' | while read member
+    do
+      $AR -NOLOGO -EXTRACT:"$member" "$archive" || exit $?
+    done
+  fi
+
+elif test -n "$quick$replace"; then
+  if test ! -f "$orig_archive"; then
+    if test -z "$create"; then
+      echo "$me: creating $orig_archive"
+    fi
+    orig_archive=
+  else
+    orig_archive=$archive
+  fi
+
+  for member
+  do
+    case $1 in
+    @*)
+      func_file_conv "${1#@}"
+      set x "$@" "@$file"
+      ;;
+    *)
+      func_file_conv "$1"
+      set x "$@" "$file"
+      ;;
+    esac
+    shift
+    shift
+  done
+
+  if test -n "$orig_archive"; then
+    $AR -NOLOGO -OUT:"$archive" "$orig_archive" "$@" || exit $?
+  else
+    $AR -NOLOGO -OUT:"$archive" "$@" || exit $?
+  fi
+
+elif test -n "$list"; then
+  if test ! -f "$orig_archive"; then
+    func_error "archive not found"
+  fi
+  $AR -NOLOGO -LIST "$archive" || exit $?
+fi

bmp.c

@@ -1,370 +0,0 @@
-/* Copyright (C)2004 Landmark Graphics Corporation
- * Copyright (C)2005 Sun Microsystems, Inc.
- *
- * This library is free software and may be redistributed and/or modified under
- * the terms of the wxWindows Library License, Version 3.1 or (at your option)
- * any later version.  The full license is in the LICENSE.txt file included
- * with this distribution.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * wxWindows Library License for more details.
-*/
-
-#include <fcntl.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <errno.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <string.h>
-#ifdef _WIN32
- #include <io.h>
-#else
- #include <unistd.h>
-#endif
-#include "./rrutil.h"
-#include "./bmp.h"
-
-#ifndef BI_BITFIELDS
-#define BI_BITFIELDS 3L
-#endif
-#ifndef BI_RGB
-#define BI_RGB 0L
-#endif
-
-#define BMPHDRSIZE 54
-typedef struct _bmphdr
-{
-	unsigned short bfType;
-	unsigned int bfSize;
-	unsigned short bfReserved1, bfReserved2;
-	unsigned int bfOffBits;
-
-	unsigned int biSize;
-	int biWidth, biHeight;
-	unsigned short biPlanes, biBitCount;
-	unsigned int biCompression, biSizeImage;
-	int biXPelsPerMeter, biYPelsPerMeter;
-	unsigned int biClrUsed, biClrImportant;
-} bmphdr;
-
-static const char *__bmperr="No error";
-
-static const int ps[BMPPIXELFORMATS]={3, 4, 3, 4, 4, 4};
-static const int roffset[BMPPIXELFORMATS]={0, 0, 2, 2, 3, 1};
-static const int goffset[BMPPIXELFORMATS]={1, 1, 1, 1, 2, 2};
-static const int boffset[BMPPIXELFORMATS]={2, 2, 0, 0, 1, 3};
-
-#define _throw(m) {__bmperr=m;  retcode=-1;  goto finally;}
-#define _unix(f) {if((f)==-1) _throw(strerror(errno));}
-#define _catch(f) {if((f)==-1) {retcode=-1;  goto finally;}}
-
-#define readme(fd, addr, size) \
-	if((bytesread=read(fd, addr, (size)))==-1) _throw(strerror(errno)); \
-	if(bytesread!=(size)) _throw("Read error");
-
-void pixelconvert(unsigned char *srcbuf, enum BMPPIXELFORMAT srcformat,
-	int srcpitch, unsigned char *dstbuf, enum BMPPIXELFORMAT dstformat, int dstpitch,
-	int w, int h, int flip)
-{
-	unsigned char *srcptr, *srcptr0, *dstptr, *dstptr0;
-	int i, j;
-
-	srcptr=flip? &srcbuf[srcpitch*(h-1)]:srcbuf;
-	for(j=0, dstptr=dstbuf; j<h; j++,
-		srcptr+=flip? -srcpitch:srcpitch, dstptr+=dstpitch)
-	{
-		for(i=0, srcptr0=srcptr, dstptr0=dstptr; i<w; i++,
-			srcptr0+=ps[srcformat], dstptr0+=ps[dstformat])
-		{
-			dstptr0[roffset[dstformat]]=srcptr0[roffset[srcformat]];
-			dstptr0[goffset[dstformat]]=srcptr0[goffset[srcformat]];
-			dstptr0[boffset[dstformat]]=srcptr0[boffset[srcformat]];
-		}
-	}
-}
-
-int loadppm(int *fd, unsigned char **buf, int *w, int *h,
-	enum BMPPIXELFORMAT f, int align, int dstbottomup, int ascii)
-{
-	FILE *fs=NULL;  int retcode=0, scalefactor, dstpitch;
-	unsigned char *tempbuf=NULL;  char temps[255], temps2[255];
-	int numread=0, totalread=0, pixel[3], i, j;
-
-	if((fs=fdopen(*fd, "r"))==NULL) _throw(strerror(errno));
-
-	do
-	{
-		if(!fgets(temps, 255, fs)) _throw("Read error");
-		if(strlen(temps)==0 || temps[0]=='\n') continue;
-		if(sscanf(temps, "%s", temps2)==1 && temps2[1]=='#') continue;
-		switch(totalread)
-		{
-			case 0:
-				if((numread=sscanf(temps, "%d %d %d", w, h, &scalefactor))==EOF)
-					_throw("Read error");
-				break;
-			case 1:
-				if((numread=sscanf(temps, "%d %d", h, &scalefactor))==EOF)
-					_throw("Read error");
-				break;
-			case 2:
-				if((numread=sscanf(temps, "%d", &scalefactor))==EOF)
-					_throw("Read error");
-				break;
-		}
-		totalread+=numread;
-	} while(totalread<3);
-	if((*w)<1 || (*h)<1 || scalefactor<1) _throw("Corrupt PPM header");
-
-	dstpitch=(((*w)*ps[f])+(align-1))&(~(align-1));
-	if((*buf=(unsigned char *)malloc(dstpitch*(*h)))==NULL)
-		_throw("Memory allocation error");
-	if(ascii)
-	{
-		for(j=0; j<*h; j++)
-		{
-			for(i=0; i<*w; i++)
-			{
-				if(fscanf(fs, "%d%d%d", &pixel[0], &pixel[1], &pixel[2])!=3)
-					_throw("Read error");
-				(*buf)[j*dstpitch+i*ps[f]+roffset[f]]=(unsigned char)(pixel[0]*255/scalefactor);
-				(*buf)[j*dstpitch+i*ps[f]+goffset[f]]=(unsigned char)(pixel[1]*255/scalefactor);
-				(*buf)[j*dstpitch+i*ps[f]+boffset[f]]=(unsigned char)(pixel[2]*255/scalefactor);
-			}
-		}
-	}
-	else
-	{
-		if(scalefactor!=255)
-			_throw("Binary PPMs must have 8-bit components");
-		if((tempbuf=(unsigned char *)malloc((*w)*(*h)*3))==NULL)
-			_throw("Memory allocation error");
-		if(fread(tempbuf, (*w)*(*h)*3, 1, fs)!=1) _throw("Read error");
-		pixelconvert(tempbuf, BMP_RGB, (*w)*3, *buf, f, dstpitch, *w, *h, dstbottomup);
-	}
-
-	finally:
-	if(fs) {fclose(fs);  *fd=-1;}
-	if(tempbuf) free(tempbuf);
-	return retcode;
-}
-
-
-int loadbmp(char *filename, unsigned char **buf, int *w, int *h, 
-	enum BMPPIXELFORMAT f, int align, int dstbottomup)
-{
-	int fd=-1, bytesread, srcpitch, srcbottomup=1, srcps, dstpitch,
-		retcode=0;
-	unsigned char *tempbuf=NULL;
-	bmphdr bh;  int flags=O_RDONLY;
-
-	dstbottomup=dstbottomup? 1:0;
-	#ifdef _WIN32
-	flags|=O_BINARY;
-	#endif
-	if(!filename || !buf || !w || !h || f<0 || f>BMPPIXELFORMATS-1 || align<1)
-		_throw("invalid argument to loadbmp()");
-	if((align&(align-1))!=0)
-		_throw("Alignment must be a power of 2");
-	_unix(fd=open(filename, flags));
-
-	readme(fd, &bh.bfType, sizeof(unsigned short));
-	if(!littleendian())	bh.bfType=byteswap16(bh.bfType);
-
-	if(bh.bfType==0x3650)
-	{
-		_catch(loadppm(&fd, buf, w, h, f, align, dstbottomup, 0));
-		goto finally;
-	}
-	if(bh.bfType==0x3350)
-	{
-		_catch(loadppm(&fd, buf, w, h, f, align, dstbottomup, 1));
-		goto finally;
-	}
-
-	readme(fd, &bh.bfSize, sizeof(unsigned int));
-	readme(fd, &bh.bfReserved1, sizeof(unsigned short));
-	readme(fd, &bh.bfReserved2, sizeof(unsigned short));
-	readme(fd, &bh.bfOffBits, sizeof(unsigned int));
-	readme(fd, &bh.biSize, sizeof(unsigned int));
-	readme(fd, &bh.biWidth, sizeof(int));
-	readme(fd, &bh.biHeight, sizeof(int));
-	readme(fd, &bh.biPlanes, sizeof(unsigned short));
-	readme(fd, &bh.biBitCount, sizeof(unsigned short));
-	readme(fd, &bh.biCompression, sizeof(unsigned int));
-	readme(fd, &bh.biSizeImage, sizeof(unsigned int));
-	readme(fd, &bh.biXPelsPerMeter, sizeof(int));
-	readme(fd, &bh.biYPelsPerMeter, sizeof(int));
-	readme(fd, &bh.biClrUsed, sizeof(unsigned int));
-	readme(fd, &bh.biClrImportant, sizeof(unsigned int));
-
-	if(!littleendian())
-	{
-		bh.bfSize=byteswap(bh.bfSize);
-		bh.bfOffBits=byteswap(bh.bfOffBits);
-		bh.biSize=byteswap(bh.biSize);
-		bh.biWidth=byteswap(bh.biWidth);
-		bh.biHeight=byteswap(bh.biHeight);
-		bh.biPlanes=byteswap16(bh.biPlanes);
-		bh.biBitCount=byteswap16(bh.biBitCount);
-		bh.biCompression=byteswap(bh.biCompression);
-		bh.biSizeImage=byteswap(bh.biSizeImage);
-		bh.biXPelsPerMeter=byteswap(bh.biXPelsPerMeter);
-		bh.biYPelsPerMeter=byteswap(bh.biYPelsPerMeter);
-		bh.biClrUsed=byteswap(bh.biClrUsed);
-		bh.biClrImportant=byteswap(bh.biClrImportant);
-	}
-
-	if(bh.bfType!=0x4d42 || bh.bfOffBits<BMPHDRSIZE
-	|| bh.biWidth<1 || bh.biHeight==0)
-		_throw("Corrupt bitmap header");
-	if((bh.biBitCount!=24 && bh.biBitCount!=32) || bh.biCompression!=BI_RGB)
-		_throw("Only uncompessed RGB bitmaps are supported");
-
-	*w=bh.biWidth;  *h=bh.biHeight;  srcps=bh.biBitCount/8;
-	if(*h<0) {*h=-(*h);  srcbottomup=0;}
-	srcpitch=(((*w)*srcps)+3)&(~3);
-	dstpitch=(((*w)*ps[f])+(align-1))&(~(align-1));
-
-	if(srcpitch*(*h)+bh.bfOffBits!=bh.bfSize) _throw("Corrupt bitmap header");
-	if((tempbuf=(unsigned char *)malloc(srcpitch*(*h)))==NULL
-	|| (*buf=(unsigned char *)malloc(dstpitch*(*h)))==NULL)
-		_throw("Memory allocation error");
-	if(lseek(fd, (long)bh.bfOffBits, SEEK_SET)!=(long)bh.bfOffBits)
-		_throw(strerror(errno));
-	_unix(bytesread=read(fd, tempbuf, srcpitch*(*h)));
-	if(bytesread!=srcpitch*(*h)) _throw("Read error");
-
-	pixelconvert(tempbuf, BMP_BGR, srcpitch, *buf, f, dstpitch, *w, *h, 
-		srcbottomup!=dstbottomup);
-
-	finally:
-	if(tempbuf) free(tempbuf);
-	if(fd!=-1) close(fd);
-	return retcode;
-}
-
-#define writeme(fd, addr, size) \
-	if((byteswritten=write(fd, addr, (size)))==-1) _throw(strerror(errno)); \
-	if(byteswritten!=(size)) _throw("Write error");
-
-int saveppm(char *filename, unsigned char *buf, int w, int h,
-	enum BMPPIXELFORMAT f, int srcpitch, int srcbottomup)
-{
-	FILE *fs=NULL;  int retcode=0;
-	unsigned char *tempbuf=NULL;
-
-	if((fs=fopen(filename, "wb"))==NULL) _throw(strerror(errno));
-	if(fprintf(fs, "P6\n")<1) _throw("Write error");
-	if(fprintf(fs, "%d %d\n", w, h)<1) _throw("Write error");
-	if(fprintf(fs, "255\n")<1) _throw("Write error");
-
-	if((tempbuf=(unsigned char *)malloc(w*h*3))==NULL)
-		_throw("Memory allocation error");
-
-	pixelconvert(buf, f, srcpitch, tempbuf, BMP_RGB, w*3, w, h, 
-		srcbottomup);
-
-	if((fwrite(tempbuf, w*h*3, 1, fs))!=1) _throw("Write error");
-
-	finally:
-	if(tempbuf) free(tempbuf);
-	if(fs) fclose(fs);
-	return retcode;
-}
-
-int savebmp(char *filename, unsigned char *buf, int w, int h,
-	enum BMPPIXELFORMAT f, int srcpitch, int srcbottomup)
-{
-	int fd=-1, byteswritten, dstpitch, retcode=0;
-	int flags=O_RDWR|O_CREAT|O_TRUNC;
-	unsigned char *tempbuf=NULL;  char *temp;
-	bmphdr bh;  int mode;
-
-	#ifdef _WIN32
-	flags|=O_BINARY;  mode=_S_IREAD|_S_IWRITE;
-	#else
-	mode=S_IRUSR|S_IWUSR|S_IRGRP|S_IWGRP|S_IROTH|S_IWOTH;
-	#endif
-	if(!filename || !buf || w<1 || h<1 || f<0 || f>BMPPIXELFORMATS-1 || srcpitch<0)
-		_throw("bad argument to savebmp()");
-
-	if(srcpitch==0) srcpitch=w*ps[f];
-
-	if((temp=strrchr(filename, '.'))!=NULL)
-	{
-		if(!stricmp(temp, ".ppm"))
-			return saveppm(filename, buf, w, h, f, srcpitch, srcbottomup);
-	}
-
-	_unix(fd=open(filename, flags, mode));
-	dstpitch=((w*3)+3)&(~3);
-
-	bh.bfType=0x4d42;
-	bh.bfSize=BMPHDRSIZE+dstpitch*h;
-	bh.bfReserved1=0;  bh.bfReserved2=0;
-	bh.bfOffBits=BMPHDRSIZE;
-	bh.biSize=40;
-	bh.biWidth=w;  bh.biHeight=h;
-	bh.biPlanes=0;  bh.biBitCount=24;
-	bh.biCompression=BI_RGB;  bh.biSizeImage=0;
-	bh.biXPelsPerMeter=0;  bh.biYPelsPerMeter=0;
-	bh.biClrUsed=0;  bh.biClrImportant=0;
-
-	if(!littleendian())
-	{
-		bh.bfType=byteswap16(bh.bfType);
-		bh.bfSize=byteswap(bh.bfSize);
-		bh.bfOffBits=byteswap(bh.bfOffBits);
-		bh.biSize=byteswap(bh.biSize);
-		bh.biWidth=byteswap(bh.biWidth);
-		bh.biHeight=byteswap(bh.biHeight);
-		bh.biPlanes=byteswap16(bh.biPlanes);
-		bh.biBitCount=byteswap16(bh.biBitCount);
-		bh.biCompression=byteswap(bh.biCompression);
-		bh.biSizeImage=byteswap(bh.biSizeImage);
-		bh.biXPelsPerMeter=byteswap(bh.biXPelsPerMeter);
-		bh.biYPelsPerMeter=byteswap(bh.biYPelsPerMeter);
-		bh.biClrUsed=byteswap(bh.biClrUsed);
-		bh.biClrImportant=byteswap(bh.biClrImportant);
-	}
-
-	writeme(fd, &bh.bfType, sizeof(unsigned short));
-	writeme(fd, &bh.bfSize, sizeof(unsigned int));
-	writeme(fd, &bh.bfReserved1, sizeof(unsigned short));
-	writeme(fd, &bh.bfReserved2, sizeof(unsigned short));
-	writeme(fd, &bh.bfOffBits, sizeof(unsigned int));
-	writeme(fd, &bh.biSize, sizeof(unsigned int));
-	writeme(fd, &bh.biWidth, sizeof(int));
-	writeme(fd, &bh.biHeight, sizeof(int));
-	writeme(fd, &bh.biPlanes, sizeof(unsigned short));
-	writeme(fd, &bh.biBitCount, sizeof(unsigned short));
-	writeme(fd, &bh.biCompression, sizeof(unsigned int));
-	writeme(fd, &bh.biSizeImage, sizeof(unsigned int));
-	writeme(fd, &bh.biXPelsPerMeter, sizeof(int));
-	writeme(fd, &bh.biYPelsPerMeter, sizeof(int));
-	writeme(fd, &bh.biClrUsed, sizeof(unsigned int));
-	writeme(fd, &bh.biClrImportant, sizeof(unsigned int));
-
-	if((tempbuf=(unsigned char *)malloc(dstpitch*h))==NULL)
-		_throw("Memory allocation error");
-
-	pixelconvert(buf, f, srcpitch, tempbuf, BMP_BGR, dstpitch, w, h, 
-		!srcbottomup);
-
-	if((byteswritten=write(fd, tempbuf, dstpitch*h))!=dstpitch*h)
-		_throw(strerror(errno));
-
-	finally:
-	if(tempbuf) free(tempbuf);
-	if(fd!=-1) close(fd);
-	return retcode;
-}
-
-const char *bmpgeterr(void)
-{
-	return __bmperr;
-}

bmp.h

@@ -1,48 +0,0 @@
-/* Copyright (C)2004 Landmark Graphics Corporation
- * Copyright (C)2005 Sun Microsystems, Inc.
- *
- * This library is free software and may be redistributed and/or modified under
- * the terms of the wxWindows Library License, Version 3.1 or (at your option)
- * any later version.  The full license is in the LICENSE.txt file included
- * with this distribution.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * wxWindows Library License for more details.
-*/
-
-// This provides rudimentary facilities for loading and saving true color
-// BMP and PPM files
-
-#ifndef __BMP_H__
-#define __BMP_H__
-
-#define BMPPIXELFORMATS 6
-enum BMPPIXELFORMAT {BMP_RGB=0, BMP_RGBA, BMP_BGR, BMP_BGRA, BMP_ABGR, BMP_ARGB};
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-// This will load a Windows bitmap from a file and return a buffer with the
-// specified pixel format, scanline alignment, and orientation.  The width and
-// height are returned in w and h.
-
-int loadbmp(char *filename, unsigned char **buf, int *w, int *h,
-	enum BMPPIXELFORMAT f, int align, int dstbottomup);
-
-// This will save a buffer with the specified pixel format, pitch, orientation,
-// width, and height as a 24-bit Windows bitmap or PPM (the filename determines
-// which format to use)
-
-int savebmp(char *filename, unsigned char *buf, int w, int h,
-	enum BMPPIXELFORMAT f, int srcpitch, int srcbottomup);
-
-const char *bmpgeterr(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

cderror.h

@@ -2,6 +2,7 @@
  * cderror.h
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2009-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -40,15 +41,16 @@ JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */
 
 #ifdef BMP_SUPPORTED
 JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format")
-JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported")
+JMESSAGE(JERR_BMP_BADDEPTH, "Only 8-, 24-, and 32-bit BMP files are supported")
 JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length")
 JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1")
 JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB")
 JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported")
 JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM")
-JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image")
+JMESSAGE(JERR_BMP_OUTOFRANGE, "Numeric value out of range in BMP file")
+JMESSAGE(JTRC_BMP, "%ux%u %d-bit BMP image")
 JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image")
-JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image")
+JMESSAGE(JTRC_BMP_OS2, "%ux%u %d-bit OS2 BMP image")
 JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image")
 #endif /* BMP_SUPPORTED */
 
@@ -73,6 +75,7 @@ JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits")
 JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB")
 JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file")
 JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file")
+JMESSAGE(JERR_PPM_OUTOFRANGE, "Numeric value out of range in PPM file")
 JMESSAGE(JTRC_PGM, "%ux%u PGM image")
 JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image")
 JMESSAGE(JTRC_PPM, "%ux%u PPM image")

cdjpeg.h

@@ -104,6 +104,7 @@ typedef struct cdjpeg_progress_mgr * cd_progress_ptr;
 #define jinit_write_targa	jIWrTarga
 #define read_quant_tables	RdQTables
 #define read_scan_script	RdScnScript
+#define set_quality_ratings     SetQRates
 #define set_quant_slots		SetQSlots
 #define set_sample_factors	SetSFacts
 #define read_color_map		RdCMap
@@ -131,8 +132,10 @@ EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo));
 /* cjpeg support routines (in rdswitch.c) */
 
 EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename,
-				    int scale_factor, boolean force_baseline));
+				       boolean force_baseline));
 EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename));
+EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg,
+					 boolean force_baseline));
 EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg));
 EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg));
 

change.log

@@ -1,6 +1,242 @@
 CHANGE LOG for Independent JPEG Group's JPEG software
 
 
+Version 9c  14-Jan-2018
+-----------------------
+
+jpegtran: add an option to the -wipe switch to fill the region
+with the average of adjacent blocks, instead of gray out.
+Thank to Caitlyn Feddock and Maddie Ziegler for inspiration.
+
+Make range extension bits adjustable (in jpegint.h).
+Thank to Robin Watts for suggestion.
+
+Provide macros for fflush() and ferror() in jinclude.h in order
+to facilitate adaption by applications using an own FILE class.
+Thank to Gerhard Huber for suggestion.
+
+Add libjpeg pkg-config file.  Thank to Mark Lavi, Vincent Torri,
+Patrick McMunn, and Huw Davies for suggestion.
+
+Add sanity checks in cjpeg image reader modules.
+Thank to Bingchang, Liu for reports.
+
+
+Version 9b  17-Jan-2016
+-----------------------
+
+Improvements and optimizations in DCT and color calculations.
+Normalize range limit array composition and access pattern.
+Thank to Sia Furler and Maddie Ziegler for inspiration.
+
+Use merged upsample with scaled DCT sizes larger than 8.
+Thank to Taylor Hatala for inspiration.
+
+Check for excessive comment lengths in argument parsing in wrjpgcom.c.
+Thank to Julian Cohen for hint.
+
+Add makefile.b32 for use with Borland C++ 32-bit (bcc32).
+Thank to Joe Slater for contribution.
+
+Document 'f' specifier for jpegtran -crop specification.
+Thank to Michele Martone for suggestion.
+
+Use defined value from header instead of hardwired number in rdswitch.c.
+Thank to Robert Sprowson for hint.
+
+
+Version 9a  19-Jan-2014
+-----------------------
+
+Add support for wide gamut color spaces (JFIF version 2).
+Improve clarity and accuracy in color conversion modules.
+Note: Requires rebuild of test images.
+
+Extend the bit depth support to all values from 8 to 12
+(BITS_IN_JSAMPLE configuration option in jmorecfg.h).
+jpegtran now supports N bits sample data precision with all N from 8 to 12
+in a single instance.  Thank to Roland Fassauer for inspiration.
+
+Try to resolve issues with new boolean type definition.
+Thank also to v4hn for suggestion.
+
+Enable option to use default Huffman tables for lossless compression
+(for hardware solution), and in this case improve lossless RGB compression
+with reversible color transform.  Thank to Benny Alexandar for hint.
+
+Extend the entropy decoding structure, so that extraneous bytes between
+compressed scan data and following marker can be reported correctly.
+Thank to Nigel Tao for hint.
+
+Add jpegtran -wipe option and extension for -crop.
+Thank to Andrew Senior, David Clunie, and Josef Schmid for suggestion.
+
+
+Version 9  13-Jan-2013
+----------------------
+
+Add cjpeg -rgb1 option to create an RGB JPEG file, and insert
+a simple reversible color transform into the processing which
+significantly improves the compression.
+The recommended command for lossless coding of RGB images is now
+cjpeg -rgb1 -block 1 -arithmetic.
+As said, this option improves the compression significantly, but
+the files are not compatible with JPEG decoders prior to IJG v9
+due to the included color transform.
+The used color transform and marker signaling is compatible with
+other JPEG standards (e.g., JPEG-LS part 2).
+
+Remove the automatic de-ANSI-fication support (Automake 1.12).
+Thank also to Nitin A Kamble for suggestion.
+
+Add remark for jpeg_mem_dest() in jdatadst.c.
+Thank to Elie-Gregoire Khoury for the hint.
+
+Support files with invalid component identifiers (created
+by Adobe PDF).  Thank to Robin Watts for the suggestion.
+
+Adapt full buffer case in jcmainct.c for use with scaled DCT.
+Thank to Sergii Biloshytskyi for the suggestion.
+
+Add type identifier for declaration of noreturn functions.
+Thank to Brett L. Moore for the suggestion.
+
+Correct argument type in format string, avoid compiler warnings.
+Thank to Vincent Torri for hint.
+
+Add missing #include directives in configuration checks, avoid
+configuration errors.  Thank to John Spencer for the hint.
+
+
+Version 8d  15-Jan-2012
+-----------------------
+
+Add cjpeg -rgb option to create RGB JPEG files.
+Using this switch suppresses the conversion from RGB
+colorspace input to the default YCbCr JPEG colorspace.
+This feature allows true lossless JPEG coding of RGB color images.
+The recommended command for this purpose is currently
+cjpeg -rgb -block 1 -arithmetic.
+SmartScale capable decoder (introduced with IJG JPEG 8) required.
+Thank to Michael Koch for the initial suggestion.
+
+Add option to disable the region adjustment in the transupp crop code.
+Thank to Jeffrey Friedl for the suggestion.
+
+Thank to Richard Jones and Edd Dawson for various minor corrections.
+
+Thank to Akim Demaille for configure.ac cleanup.
+
+
+Version 8c  16-Jan-2011
+-----------------------
+
+Add option to compression library and cjpeg (-block N) to use
+different DCT block size.
+All N from 1 to 16 are possible.  Default is 8 (baseline format).
+Larger values produce higher compression,
+smaller values produce higher quality.
+SmartScale capable decoder (introduced with IJG JPEG 8) required.
+
+
+Version 8b  16-May-2010
+-----------------------
+
+Repair problem in new memory source manager with corrupt JPEG data.
+Thank to Ted Campbell and Samuel Chun for the report.
+
+Repair problem in Makefile.am test target.
+Thank to anonymous user for the report.
+
+Support MinGW installation with automatic configure.
+Thank to Volker Grabsch for the suggestion.
+
+
+Version 8a  28-Feb-2010
+-----------------------
+
+Writing tables-only datastreams via jpeg_write_tables works again.
+
+Support 32-bit BMPs (RGB image with Alpha channel) for read in cjpeg.
+Thank to Brett Blackham for the suggestion.
+
+Improve accuracy in floating point IDCT calculation.
+Thank to Robert Hooke for the hint.
+
+
+Version 8  10-Jan-2010
+----------------------
+
+jpegtran now supports the same -scale option as djpeg for "lossless" resize.
+An implementation of the JPEG SmartScale extension is required for this
+feature.  A (draft) specification of the JPEG SmartScale extension is
+available as a contributed document at ITU and ISO.  Revision 2 or later
+of the document is required (latest document version is Revision 3).
+The SmartScale extension will enable more features beside lossless resize
+in future implementations, as described in the document (new compression
+options).
+
+Add sanity check in BMP reader module to avoid cjpeg crash for empty input
+image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error).
+
+Add data source and destination managers for read from and write to
+memory buffers.  New API functions jpeg_mem_src and jpeg_mem_dest.
+Thank to Roberto Boni from Italy for the suggestion.
+
+
+Version 7  27-Jun-2009
+----------------------
+
+New scaled DCTs implemented.
+djpeg now supports scalings N/8 with all N from 1 to 16.
+cjpeg now supports scalings 8/N with all N from 1 to 16.
+Scaled DCTs with size larger than 8 are now also used for resolving the
+common 2x2 chroma subsampling case without additional spatial resampling.
+Separate spatial resampling for those kind of files is now only necessary
+for N>8 scaling cases.
+Furthermore, separate scaled DCT functions are provided for direct resolving
+of the common asymmetric subsampling cases (2x1 and 1x2) without additional
+spatial resampling.
+
+cjpeg -quality option has been extended for support of separate quality
+settings for luminance and chrominance (or in general, for every provided
+quantization table slot).
+New API function jpeg_default_qtables() and q_scale_factor array in library.
+
+Added -nosmooth option to cjpeg, complementary to djpeg.
+New variable "do_fancy_downsampling" in library, complement to fancy
+upsampling.  Fancy upsampling now uses direct DCT scaling with sizes
+larger than 8.  The old method is not reversible and has been removed.
+
+Support arithmetic entropy encoding and decoding.
+Added files jaricom.c, jcarith.c, jdarith.c.
+
+Straighten the file structure:
+Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h.
+
+jpegtran has a new "lossless" cropping feature.
+
+Implement -perfect option in jpegtran, new API function
+jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch)
+
+Better error messages for jpegtran fopen failure.
+(DP 203_jpegtran_errmsg.dpatch)
+
+Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c:
+according to Netpbm, the de facto standard implementation of the PNM formats,
+the most significant byte is first. (DP 203_rdppm.dpatch)
+
+Add -raw option to rdjpgcom not to mangle the output.
+(DP 205_rdjpgcom_raw.dpatch)
+
+Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch)
+
+Add extern "C" to jpeglib.h.
+This avoids the need to put extern "C" { ... } around #include "jpeglib.h"
+in your C++ application.  Defining the symbol DONT_USE_EXTERN_C in the
+configuration prevents this. (DP 202_jpeglib.h_c++.dpatch)
+
+
 Version 6b  27-Mar-1998
 -----------------------
 

cjpeg.1

@@ -1,4 +1,4 @@
-.TH CJPEG 1 "20 March 1998"
+.TH CJPEG 1 "26 July 2015"
 .SH NAME
 cjpeg \- compress an image file to a JPEG file
 .SH SYNOPSIS
@@ -16,7 +16,7 @@ cjpeg \- compress an image file to a JPEG file
 compresses the named image file, or the standard input if no file is
 named, and produces a JPEG/JFIF file on the standard output.
 The currently supported input file formats are: PPM (PBMPLUS color
-format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster
+format), PGM (PBMPLUS grayscale format), BMP, Targa, and RLE (Utah Raster
 Toolkit format).  (RLE is supported only if the URT library is available.)
 .SH OPTIONS
 All switch names may be abbreviated; for example,
@@ -36,7 +36,7 @@ though for brevity these are not mentioned below.
 .PP
 The basic switches are:
 .TP
-.BI \-quality " N"
+.BI \-quality " N[,...]"
 Scale quantization tables to adjust image quality.  Quality is 0 (worst) to
 100 (best); default is 75.  (See below for more info.)
 .TP
@@ -49,6 +49,17 @@ By saying
 .BR \-grayscale ,
 you'll get a smaller JPEG file that takes less time to process.
 .TP
+.B \-rgb
+Create RGB JPEG file.
+Using this switch suppresses the conversion from RGB
+colorspace input to the default YCbCr JPEG colorspace.
+You can use this switch in combination with the
+.BI \-block " N"
+switch (see below) for lossless JPEG coding.
+See also the
+.B \-rgb1
+switch below.
+.TP
 .B \-optimize
 Perform optimization of entropy encoding parameters.  Without this, default
 encoding parameters are used.
@@ -62,6 +73,13 @@ decompression are unaffected by
 .B \-progressive
 Create progressive JPEG file (see below).
 .TP
+.BI \-scale " M/N"
+Scale the output image by a factor M/N.  Currently supported scale factors are
+M/N with all N from 1 to 16, where M is the destination DCT size, which is 8
+by default (see
+.BI \-block " N"
+switch below).
+.TP
 .B \-targa
 Input file is Targa format.  Targa files that contain an "identification"
 field will not be automatically recognized by
@@ -109,6 +127,34 @@ other JPEG programs may be unable to decode the resulting file.  Use
 if you need to ensure compatibility at low quality values.)
 .PP
 The
+.B \-quality
+option has been extended in IJG version 7 for support of separate quality
+settings for luminance and chrominance (or in general, for every provided
+quantization table slot).  This feature is useful for high-quality
+applications which cannot accept the damage of color data by coarse
+subsampling settings.  You can now easily reduce the color data amount more
+smoothly with finer control without separate subsampling.  The resulting file
+is fully compliant with standard JPEG decoders.
+Note that the
+.B \-quality
+ratings refer to the quantization table slots, and that the last value is
+replicated if there are more q-table slots than parameters.  The default
+q-table slots are 0 for luminance and 1 for chrominance with default tables as
+given in the JPEG standard.  This is compatible with the old behaviour in case
+that only one parameter is given, which is then used for both luminance and
+chrominance (slots 0 and 1).  More or custom quantization tables can be set
+with
+.B \-qtables
+and assigned to components with
+.B \-qslots
+parameter (see the "wizard" switches below).
+.B Caution:
+You must explicitly add
+.BI \-sample " 1x1"
+for efficient separate color
+quality selection, since the default value used by library is 2x2!
+.PP
+The
 .B \-progressive
 switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
 is stored in multiple scans of increasing quality.  If the file is being
@@ -117,12 +163,62 @@ scan to display a low-quality image very quickly, and can then improve the
 display with each subsequent scan.  The final image is exactly equivalent to a
 standard JPEG file of the same quality setting, and the total file size is
 about the same --- often a little smaller.
-.B Caution:
-progressive JPEG is not yet widely implemented, so many decoders will be
-unable to view a progressive JPEG file at all.
 .PP
 Switches for advanced users:
 .TP
+.B \-arithmetic
+Use arithmetic coding.
+.B Caution:
+arithmetic coded JPEG is not yet widely implemented, so many decoders will
+be unable to view an arithmetic coded JPEG file at all.
+.TP
+.BI \-block " N"
+Set DCT block size.  All N from 1 to 16 are possible.
+Default is 8 (baseline format).
+Larger values produce higher compression,
+smaller values produce higher quality
+(exact DCT stage possible with 1 or 2; with the default quality of 75 and
+default Luminance qtable the DCT+Quantization stage is lossless for N=1).
+.B Caution:
+An implementation of the JPEG SmartScale extension is required for this
+feature.  SmartScale enabled JPEG is not yet widely implemented, so many
+decoders will be unable to view a SmartScale extended JPEG file at all.
+.TP
+.B \-rgb1
+Create RGB JPEG file with reversible color transform.
+Works like the
+.B \-rgb
+switch (see above) and inserts a simple reversible color transform
+into the processing which significantly improves the compression.
+Use this switch in combination with the
+.BI \-block " N"
+switch (see above) for lossless JPEG coding.
+.B Caution:
+A decoder with inverse color transform support is required for
+this feature.  Reversible color transform support is not yet
+widely implemented, so many decoders will be unable to view
+a reversible color transformed JPEG file at all.
+.TP
+.B \-bgycc
+Create big gamut YCC JPEG file.
+In this type of encoding the color difference components are quantized
+further by a factor of 2 compared to the normal Cb/Cr values, thus creating
+space to allow larger color values with higher saturation than the normal
+gamut limits to be encoded.  In order to compensate for the loss of color
+fidelity compared to a normal YCC encoded file, the color quantization
+tables can be adjusted accordingly.  For example,
+.B cjpeg \-bgycc \-quality
+80,90 will give similar results as
+.B cjpeg \-quality
+80.
+.B Caution:
+For correct decompression a decoder with big gamut YCC support (JFIF
+version 2) is required.  An old decoder may or may not display a big
+gamut YCC encoded JPEG file, depending on JFIF version check and
+corresponding warning/error configuration.  In case of a granted
+decompression the old decoder will display the image with half
+saturated colors.
+.TP
 .B \-dct int
 Use integer DCT method (default).
 .TP
@@ -137,6 +233,9 @@ note that results of the floating-point method may vary slightly across
 machines, while the integer methods should give the same results everywhere.
 The fast integer method is much less accurate than the other two.
 .TP
+.B \-nosmooth
+Don't use high-quality downsampling.
+.TP
 .BI \-restart " N"
 Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is
 attached to the number.
@@ -211,7 +310,7 @@ Use the scan script given in the specified text file.
 .PP
 The "wizard" switches are intended for experimentation with JPEG.  If you
 don't know what you are doing, \fBdon't use them\fR.  These switches are
-documented further in the file wizard.doc.
+documented further in the file wizard.txt.
 .SH EXAMPLES
 .LP
 This example compresses the PPM file foo.ppm with a quality factor of
@@ -276,11 +375,9 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-GIF input files are no longer supported, to avoid the Unisys LZW patent.
-Use a Unisys-licensed program if you need to read a GIF file.  (Conversion
-of GIF files to JPEG is usually a bad idea anyway.)
+GIF input files are no longer supported, to avoid the Unisys LZW patent
+(now expired).
+(Conversion of GIF files to JPEG is usually a bad idea anyway.)
 .PP
 Not all variants of BMP and Targa file formats are supported.
 .PP
@@ -288,5 +385,3 @@ The
 .B \-targa
 switch is not a bug, it's a feature.  (It would be a bug if the Targa format
 designers had not been clueless.)
-.PP
-Still not as fast as we'd like.

cjpeg.c

@@ -2,6 +2,7 @@
  * cjpeg.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -149,18 +150,32 @@ usage (void)
 #endif
 
   fprintf(stderr, "Switches (names may be abbreviated):\n");
-  fprintf(stderr, "  -quality N     Compression quality (0..100; 5-95 is useful range)\n");
+  fprintf(stderr, "  -quality N[,...]   Compression quality (0..100; 5-95 is useful range)\n");
   fprintf(stderr, "  -grayscale     Create monochrome JPEG file\n");
+  fprintf(stderr, "  -rgb           Create RGB JPEG file\n");
 #ifdef ENTROPY_OPT_SUPPORTED
   fprintf(stderr, "  -optimize      Optimize Huffman table (smaller file, but slow compression)\n");
 #endif
 #ifdef C_PROGRESSIVE_SUPPORTED
   fprintf(stderr, "  -progressive   Create progressive JPEG file\n");
 #endif
+#ifdef DCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -scale M/N     Scale image by fraction M/N, eg, 1/2\n");
+#endif
 #ifdef TARGA_SUPPORTED
   fprintf(stderr, "  -targa         Input file is Targa format (usually not needed)\n");
 #endif
   fprintf(stderr, "Switches for advanced users:\n");
+#ifdef C_ARITH_CODING_SUPPORTED
+  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
+#endif
+#ifdef DCT_SCALING_SUPPORTED
+  fprintf(stderr, "  -block N       DCT block size (1..16; default is 8)\n");
+#endif
+#if JPEG_LIB_VERSION_MAJOR >= 9
+  fprintf(stderr, "  -rgb1          Create RGB JPEG file with reversible color transform\n");
+  fprintf(stderr, "  -bgycc         Create big gamut YCC JPEG file\n");
+#endif
 #ifdef DCT_ISLOW_SUPPORTED
   fprintf(stderr, "  -dct int       Use integer DCT method%s\n",
 	  (JDCT_DEFAULT == JDCT_ISLOW ? " (default)" : ""));
@@ -173,6 +188,7 @@ usage (void)
   fprintf(stderr, "  -dct float     Use floating-point DCT method%s\n",
 	  (JDCT_DEFAULT == JDCT_FLOAT ? " (default)" : ""));
 #endif
+  fprintf(stderr, "  -nosmooth      Don't use high-quality downsampling\n");
   fprintf(stderr, "  -restart N     Set restart interval in rows, or in blocks with B\n");
 #ifdef INPUT_SMOOTHING_SUPPORTED
   fprintf(stderr, "  -smooth N      Smooth dithered input (N=1..100 is strength)\n");
@@ -181,9 +197,6 @@ usage (void)
   fprintf(stderr, "  -outfile name  Specify name for output file\n");
   fprintf(stderr, "  -verbose  or  -debug   Emit debug output\n");
   fprintf(stderr, "Switches for wizards:\n");
-#ifdef C_ARITH_CODING_SUPPORTED
-  fprintf(stderr, "  -arithmetic    Use arithmetic coding\n");
-#endif
   fprintf(stderr, "  -baseline      Force baseline quantization tables\n");
   fprintf(stderr, "  -qtables file  Use quantization tables given in file\n");
   fprintf(stderr, "  -qslots N[,...]    Set component quantization tables\n");
@@ -209,21 +222,16 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 {
   int argn;
   char * arg;
-  int quality;			/* -quality parameter */
-  int q_scale_factor;		/* scaling percentage for -qtables */
   boolean force_baseline;
   boolean simple_progressive;
+  char * qualityarg = NULL;	/* saves -quality parm if any */
   char * qtablefile = NULL;	/* saves -qtables filename if any */
   char * qslotsarg = NULL;	/* saves -qslots parm if any */
   char * samplearg = NULL;	/* saves -sample parm if any */
   char * scansarg = NULL;	/* saves -scans parm if any */
 
   /* Set up default JPEG parameters. */
-  /* Note that default -quality level need not, and does not,
-   * match the default scaling for an explicit -qtables argument.
-   */
-  quality = 75;			/* default -quality value */
-  q_scale_factor = 100;		/* default to no scaling for -qtables */
+
   force_baseline = FALSE;	/* by default, allow 16-bit quantizers */
   simple_progressive = FALSE;
   is_targa = FALSE;
@@ -254,10 +262,29 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       exit(EXIT_FAILURE);
 #endif
 
-    } else if (keymatch(arg, "baseline", 1)) {
+    } else if (keymatch(arg, "baseline", 2)) {
       /* Force baseline-compatible output (8-bit quantizer values). */
       force_baseline = TRUE;
 
+    } else if (keymatch(arg, "block", 2)) {
+      /* Set DCT block size. */
+#if defined DCT_SCALING_SUPPORTED && JPEG_LIB_VERSION_MAJOR >= 8 && \
+      (JPEG_LIB_VERSION_MAJOR > 8 || JPEG_LIB_VERSION_MINOR >= 3)
+      int val;
+
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%d", &val) != 1)
+	usage();
+      if (val < 1 || val > 16)
+	usage();
+      cinfo->block_size = val;
+#else
+      fprintf(stderr, "%s: sorry, block size setting not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
     } else if (keymatch(arg, "dct", 2)) {
       /* Select DCT algorithm. */
       if (++argn >= argc)	/* advance to next argument */
@@ -287,6 +314,27 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
       /* Force a monochrome JPEG file to be generated. */
       jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
 
+    } else if (keymatch(arg, "rgb", 3) || keymatch(arg, "rgb1", 4)) {
+      /* Force an RGB JPEG file to be generated. */
+#if JPEG_LIB_VERSION_MAJOR >= 9
+      /* Note: Entropy table assignment in jpeg_set_colorspace depends
+       * on color_transform.
+       */
+      cinfo->color_transform = arg[3] ? JCT_SUBTRACT_GREEN : JCT_NONE;
+#endif
+      jpeg_set_colorspace(cinfo, JCS_RGB);
+
+    } else if (keymatch(arg, "bgycc", 5)) {
+      /* Force a big gamut YCC JPEG file to be generated. */
+#if JPEG_LIB_VERSION_MAJOR >= 9 && \
+      (JPEG_LIB_VERSION_MAJOR > 9 || JPEG_LIB_VERSION_MINOR >= 1)
+      jpeg_set_colorspace(cinfo, JCS_BG_YCC);
+#else
+      fprintf(stderr, "%s: sorry, BG_YCC colorspace not supported\n",
+	      progname);
+      exit(EXIT_FAILURE);
+#endif
+
     } else if (keymatch(arg, "maxmemory", 3)) {
       /* Maximum memory in Kb (or Mb with 'm'). */
       long lval;
@@ -300,6 +348,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 	lval *= 1000L;
       cinfo->mem->max_memory_to_use = lval * 1000L;
 
+    } else if (keymatch(arg, "nosmooth", 3)) {
+      /* Suppress fancy downsampling. */
+      cinfo->do_fancy_downsampling = FALSE;
+
     } else if (keymatch(arg, "optimize", 1) || keymatch(arg, "optimise", 1)) {
       /* Enable entropy parm optimization. */
 #ifdef ENTROPY_OPT_SUPPORTED
@@ -328,13 +380,10 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 #endif
 
     } else if (keymatch(arg, "quality", 1)) {
-      /* Quality factor (quantization table scaling factor). */
+      /* Quality ratings (quantization table scaling factors). */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d", &quality) != 1)
-	usage();
-      /* Change scale factor in case -qtables is present. */
-      q_scale_factor = jpeg_quality_scaling(quality);
+      qualityarg = argv[argn];
 
     } else if (keymatch(arg, "qslots", 2)) {
       /* Quantization table slot numbers. */
@@ -382,7 +431,15 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
        * default sampling factors.
        */
 
-    } else if (keymatch(arg, "scans", 2)) {
+    } else if (keymatch(arg, "scale", 4)) {
+      /* Scale the image by a fraction M/N. */
+      if (++argn >= argc)	/* advance to next argument */
+	usage();
+      if (sscanf(argv[argn], "%u/%u",
+		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
+	usage();
+
+    } else if (keymatch(arg, "scans", 4)) {
       /* Set scan script. */
 #ifdef C_MULTISCAN_FILES_SUPPORTED
       if (++argn >= argc)	/* advance to next argument */
@@ -422,11 +479,12 @@ parse_switches (j_compress_ptr cinfo, int argc, char **argv,
 
     /* Set quantization tables for selected quality. */
     /* Some or all may be overridden if -qtables is present. */
-    jpeg_set_quality(cinfo, quality, force_baseline);
+    if (qualityarg != NULL)	/* process -quality if it was present */
+      if (! set_quality_ratings(cinfo, qualityarg, force_baseline))
+	usage();
 
     if (qtablefile != NULL)	/* process -qtables if it was present */
-      if (! read_quant_tables(cinfo, qtablefile,
-			      q_scale_factor, force_baseline))
+      if (! read_quant_tables(cinfo, qtablefile, force_baseline))
 	usage();
 
     if (qslotsarg != NULL)	/* process -qslots if it was present */

ckconfig.c

@@ -0,0 +1,402 @@
+/*
+ * ckconfig.c
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ */
+
+/*
+ * This program is intended to help you determine how to configure the JPEG
+ * software for installation on a particular system.  The idea is to try to
+ * compile and execute this program.  If your compiler fails to compile the
+ * program, make changes as indicated in the comments below.  Once you can
+ * compile the program, run it, and it will produce a "jconfig.h" file for
+ * your system.
+ *
+ * As a general rule, each time you try to compile this program,
+ * pay attention only to the *first* error message you get from the compiler.
+ * Many C compilers will issue lots of spurious error messages once they
+ * have gotten confused.  Go to the line indicated in the first error message,
+ * and read the comments preceding that line to see what to change.
+ *
+ * Almost all of the edits you may need to make to this program consist of
+ * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL",
+ * or vice versa.  This is called defining or undefining that symbol.
+ */
+
+
+/* First we must see if your system has the include files we need.
+ * We start out with the assumption that your system has all the ANSI-standard
+ * include files.  If you get any error trying to include one of these files,
+ * undefine the corresponding HAVE_xxx symbol.
+ */
+
+#define HAVE_STDDEF_H		/* replace 'define' by 'undef' if error here */
+#ifdef HAVE_STDDEF_H		/* next line will be skipped if you undef... */
+#include <stddef.h>
+#endif
+
+#define HAVE_STDLIB_H		/* same thing for stdlib.h */
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#include <stdio.h>		/* If you ain't got this, you ain't got C. */
+
+/* We have to see if your string functions are defined by
+ * strings.h (old BSD convention) or string.h (everybody else).
+ * We try the non-BSD convention first; define NEED_BSD_STRINGS
+ * if the compiler says it can't find string.h.
+ */
+
+#undef NEED_BSD_STRINGS
+
+#ifdef NEED_BSD_STRINGS
+#include <strings.h>
+#else
+#include <string.h>
+#endif
+
+/* On some systems (especially older Unix machines), type size_t is
+ * defined only in the include file <sys/types.h>.  If you get a failure
+ * on the size_t test below, try defining NEED_SYS_TYPES_H.
+ */
+
+#undef NEED_SYS_TYPES_H		/* start by assuming we don't need it */
+#ifdef NEED_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+
+/* Usually type size_t is defined in one of the include files we've included
+ * above.  If not, you'll get an error on the "typedef size_t my_size_t;" line.
+ * In that case, first try defining NEED_SYS_TYPES_H just above.
+ * If that doesn't work, you'll have to search through your system library
+ * to figure out which include file defines "size_t".  Look for a line that
+ * says "typedef something-or-other size_t;".  Then, change the line below
+ * that says "#include <someincludefile.h>" to instead include the file
+ * you found size_t in, and define NEED_SPECIAL_INCLUDE.  If you can't find
+ * type size_t anywhere, try replacing "#include <someincludefile.h>" with
+ * "typedef unsigned int size_t;".
+ */
+
+#undef NEED_SPECIAL_INCLUDE	/* assume we DON'T need it, for starters */
+
+#ifdef NEED_SPECIAL_INCLUDE
+#include <someincludefile.h>
+#endif
+
+typedef size_t my_size_t;	/* The payoff: do we have size_t now? */
+
+
+/* The next question is whether your compiler supports ANSI-style function
+ * prototypes.  You need to know this in order to choose between using
+ * makefile.ansi and using makefile.unix.
+ * The #define line below is set to assume you have ANSI function prototypes.
+ * If you get an error in this group of lines, undefine HAVE_PROTOTYPES.
+ */
+
+#define HAVE_PROTOTYPES
+
+#ifdef HAVE_PROTOTYPES
+int testfunction (int arg1, int * arg2); /* check prototypes */
+
+struct methods_struct {		/* check method-pointer declarations */
+  int (*error_exit) (char *msgtext);
+  int (*trace_message) (char *msgtext);
+  int (*another_method) (void);
+};
+
+int testfunction (int arg1, int * arg2) /* check definitions */
+{
+  return arg2[arg1];
+}
+
+int test2function (void)	/* check void arg list */
+{
+  return 0;
+}
+#endif
+
+
+/* Now we want to find out if your compiler knows what "unsigned char" means.
+ * If you get an error on the "unsigned char un_char;" line,
+ * then undefine HAVE_UNSIGNED_CHAR.
+ */
+
+#define HAVE_UNSIGNED_CHAR
+
+#ifdef HAVE_UNSIGNED_CHAR
+unsigned char un_char;
+#endif
+
+
+/* Now we want to find out if your compiler knows what "unsigned short" means.
+ * If you get an error on the "unsigned short un_short;" line,
+ * then undefine HAVE_UNSIGNED_SHORT.
+ */
+
+#define HAVE_UNSIGNED_SHORT
+
+#ifdef HAVE_UNSIGNED_SHORT
+unsigned short un_short;
+#endif
+
+
+/* Now we want to find out if your compiler understands type "void".
+ * If you get an error anywhere in here, undefine HAVE_VOID.
+ */
+
+#define HAVE_VOID
+
+#ifdef HAVE_VOID
+/* Caution: a C++ compiler will insist on complete prototypes */
+typedef void * void_ptr;	/* check void * */
+#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
+typedef void (*void_func) (int a, int b);
+#else
+typedef void (*void_func) ();
+#endif
+
+#ifdef HAVE_PROTOTYPES		/* check void function result */
+void test3function (void_ptr arg1, void_func arg2)
+#else
+void test3function (arg1, arg2)
+     void_ptr arg1;
+     void_func arg2;
+#endif
+{
+  char * locptr = (char *) arg1; /* check casting to and from void * */
+  arg1 = (void *) locptr;
+  (*arg2) (1, 2);		/* check call of fcn returning void */
+}
+#endif
+
+
+/* Now we want to find out if your compiler knows what "const" means.
+ * If you get an error here, undefine HAVE_CONST.
+ */
+
+#define HAVE_CONST
+
+#ifdef HAVE_CONST
+static const int carray[3] = {1, 2, 3};
+
+#ifdef HAVE_PROTOTYPES
+int test4function (const int arg1)
+#else
+int test4function (arg1)
+     const int arg1;
+#endif
+{
+  return carray[arg1];
+}
+#endif
+
+
+/* If you get an error or warning about this structure definition,
+ * define INCOMPLETE_TYPES_BROKEN.
+ */
+
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifndef INCOMPLETE_TYPES_BROKEN
+typedef struct undefined_structure * undef_struct_ptr;
+#endif
+
+
+/* If you get an error about duplicate names,
+ * define NEED_SHORT_EXTERNAL_NAMES.
+ */
+
+#undef NEED_SHORT_EXTERNAL_NAMES
+
+#ifndef NEED_SHORT_EXTERNAL_NAMES
+
+int possibly_duplicate_function ()
+{
+  return 0;
+}
+
+int possibly_dupli_function ()
+{
+  return 1;
+}
+
+#endif
+
+
+
+/************************************************************************
+ *  OK, that's it.  You should not have to change anything beyond this
+ *  point in order to compile and execute this program.  (You might get
+ *  some warnings, but you can ignore them.)
+ *  When you run the program, it will make a couple more tests that it
+ *  can do automatically, and then it will create jconfig.h and print out
+ *  any additional suggestions it has.
+ ************************************************************************
+ */
+
+
+#ifdef HAVE_PROTOTYPES
+int is_char_signed (int arg)
+#else
+int is_char_signed (arg)
+     int arg;
+#endif
+{
+  if (arg == 189) {		/* expected result for unsigned char */
+    return 0;			/* type char is unsigned */
+  }
+  else if (arg != -67) {	/* expected result for signed char */
+    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
+    printf("I fear the JPEG software will not work at all.\n\n");
+  }
+  return 1;			/* assume char is signed otherwise */
+}
+
+
+#ifdef HAVE_PROTOTYPES
+int is_shifting_signed (long arg)
+#else
+int is_shifting_signed (arg)
+     long arg;
+#endif
+/* See whether right-shift on a long is signed or not. */
+{
+  long res = arg >> 4;
+
+  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
+    return 1;			/* right shift is signed */
+  }
+  /* see if unsigned-shift hack will fix it. */
+  /* we can't just test exact value since it depends on width of long... */
+  res |= (~0L) << (32-4);
+  if (res == -0x7F7E80CL) {	/* expected result now? */
+    return 0;			/* right shift is unsigned */
+  }
+  printf("Right shift isn't acting as I expect it to.\n");
+  printf("I fear the JPEG software will not work at all.\n\n");
+  return 0;			/* try it with unsigned anyway */
+}
+
+
+#ifdef HAVE_PROTOTYPES
+int main (int argc, char ** argv)
+#else
+int main (argc, argv)
+     int argc;
+     char ** argv;
+#endif
+{
+  char signed_char_check = (char) (-67);
+  FILE *outfile;
+
+  /* Attempt to write jconfig.h */
+  if ((outfile = fopen("jconfig.h", "w")) == NULL) {
+    printf("Failed to write jconfig.h\n");
+    return 1;
+  }
+
+  /* Write out all the info */
+  fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n");
+  fprintf(outfile, "/* see jconfig.txt for explanations */\n\n");
+#ifdef HAVE_PROTOTYPES
+  fprintf(outfile, "#define HAVE_PROTOTYPES\n");
+#else
+  fprintf(outfile, "#undef HAVE_PROTOTYPES\n");
+#endif
+#ifdef HAVE_UNSIGNED_CHAR
+  fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n");
+#else
+  fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n");
+#endif
+#ifdef HAVE_UNSIGNED_SHORT
+  fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n");
+#else
+  fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n");
+#endif
+#ifdef HAVE_VOID
+  fprintf(outfile, "/* #define void char */\n");
+#else
+  fprintf(outfile, "#define void char\n");
+#endif
+#ifdef HAVE_CONST
+  fprintf(outfile, "/* #define const */\n");
+#else
+  fprintf(outfile, "#define const\n");
+#endif
+  if (is_char_signed((int) signed_char_check))
+    fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n");
+  else
+    fprintf(outfile, "#define CHAR_IS_UNSIGNED\n");
+#ifdef HAVE_STDDEF_H
+  fprintf(outfile, "#define HAVE_STDDEF_H\n");
+#else
+  fprintf(outfile, "#undef HAVE_STDDEF_H\n");
+#endif
+#ifdef HAVE_STDLIB_H
+  fprintf(outfile, "#define HAVE_STDLIB_H\n");
+#else
+  fprintf(outfile, "#undef HAVE_STDLIB_H\n");
+#endif
+#ifdef NEED_BSD_STRINGS
+  fprintf(outfile, "#define NEED_BSD_STRINGS\n");
+#else
+  fprintf(outfile, "#undef NEED_BSD_STRINGS\n");
+#endif
+#ifdef NEED_SYS_TYPES_H
+  fprintf(outfile, "#define NEED_SYS_TYPES_H\n");
+#else
+  fprintf(outfile, "#undef NEED_SYS_TYPES_H\n");
+#endif
+  fprintf(outfile, "#undef NEED_FAR_POINTERS\n");
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+  fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n");
+#else
+  fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n");
+#endif
+#ifdef INCOMPLETE_TYPES_BROKEN
+  fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n");
+#else
+  fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n");
+#endif
+  fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n");
+  if (is_shifting_signed(-0x7F7E80B1L))
+    fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n");
+  else
+    fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n");
+  fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n");
+  fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n");
+  fprintf(outfile, "#define BMP_SUPPORTED		/* BMP image file format */\n");
+  fprintf(outfile, "#define GIF_SUPPORTED		/* GIF image file format */\n");
+  fprintf(outfile, "#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */\n");
+  fprintf(outfile, "#undef RLE_SUPPORTED		/* Utah RLE image file format */\n");
+  fprintf(outfile, "#define TARGA_SUPPORTED		/* Targa image file format */\n\n");
+  fprintf(outfile, "#undef TWO_FILE_COMMANDLINE	/* You may need this on non-Unix systems */\n");
+  fprintf(outfile, "#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */\n");
+  fprintf(outfile, "#undef DONT_USE_B_MODE\n");
+  fprintf(outfile, "/* #define PROGRESS_REPORT */	/* optional */\n");
+  fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n");
+
+  /* Close the jconfig.h file */
+  fclose(outfile);
+
+  /* User report */
+  printf("Configuration check for Independent JPEG Group's software done.\n");
+  printf("\nI have written the jconfig.h file for you.\n\n");
+#ifdef HAVE_PROTOTYPES
+  printf("You should use makefile.ansi as the starting point for your Makefile.\n");
+#else
+  printf("You should use makefile.unix as the starting point for your Makefile.\n");
+#endif
+
+#ifdef NEED_SPECIAL_INCLUDE
+  printf("\nYou'll need to change jconfig.h to include the system include file\n");
+  printf("that you found type size_t in, or add a direct definition of type\n");
+  printf("size_t if that's what you used.  Just add it to the end.\n");
+#endif
+
+  return 0;
+}

coderules.txt

@@ -103,7 +103,7 @@ should be in the common data structures.
 
 4. Don't use static variables except for read-only constant tables.  Variables
 that should be private to a module can be placed into private structures (see
-the system architecture document, structure.doc).
+the system architecture document, structure.txt).
 
 5. Source file names should begin with "j" for files that are part of the
 library proper; source files that are not part of the library, such as cjpeg.c

compile

@@ -0,0 +1,348 @@
+#! /bin/sh
+# Wrapper for compilers which do not understand '-c -o'.
+
+scriptversion=2016-01-11.22; # UTC
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+# Written by Tom Tromey <tromey@cygnus.com>.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# This file is maintained in Automake, please report
+# bugs to <bug-automake@gnu.org> or send patches to
+# <automake-patches@gnu.org>.
+
+nl='
+'
+
+# We need space, tab and new line, in precisely that order.  Quoting is
+# there to prevent tools from complaining about whitespace usage.
+IFS=" ""	$nl"
+
+file_conv=
+
+# func_file_conv build_file lazy
+# Convert a $build file to $host form and store it in $file
+# Currently only supports Windows hosts. If the determined conversion
+# type is listed in (the comma separated) LAZY, no conversion will
+# take place.
+func_file_conv ()
+{
+  file=$1
+  case $file in
+    / | /[!/]*) # absolute file, and not a UNC file
+      if test -z "$file_conv"; then
+	# lazily determine how to convert abs files
+	case `uname -s` in
+	  MINGW*)
+	    file_conv=mingw
+	    ;;
+	  CYGWIN*)
+	    file_conv=cygwin
+	    ;;
+	  *)
+	    file_conv=wine
+	    ;;
+	esac
+      fi
+      case $file_conv/,$2, in
+	*,$file_conv,*)
+	  ;;
+	mingw/*)
+	  file=`cmd //C echo "$file " | sed -e 's/"\(.*\) " *$/\1/'`
+	  ;;
+	cygwin/*)
+	  file=`cygpath -m "$file" || echo "$file"`
+	  ;;
+	wine/*)
+	  file=`winepath -w "$file" || echo "$file"`
+	  ;;
+      esac
+      ;;
+  esac
+}
+
+# func_cl_dashL linkdir
+# Make cl look for libraries in LINKDIR
+func_cl_dashL ()
+{
+  func_file_conv "$1"
+  if test -z "$lib_path"; then
+    lib_path=$file
+  else
+    lib_path="$lib_path;$file"
+  fi
+  linker_opts="$linker_opts -LIBPATH:$file"
+}
+
+# func_cl_dashl library
+# Do a library search-path lookup for cl
+func_cl_dashl ()
+{
+  lib=$1
+  found=no
+  save_IFS=$IFS
+  IFS=';'
+  for dir in $lib_path $LIB
+  do
+    IFS=$save_IFS
+    if $shared && test -f "$dir/$lib.dll.lib"; then
+      found=yes
+      lib=$dir/$lib.dll.lib
+      break
+    fi
+    if test -f "$dir/$lib.lib"; then
+      found=yes
+      lib=$dir/$lib.lib
+      break
+    fi
+    if test -f "$dir/lib$lib.a"; then
+      found=yes
+      lib=$dir/lib$lib.a
+      break
+    fi
+  done
+  IFS=$save_IFS
+
+  if test "$found" != yes; then
+    lib=$lib.lib
+  fi
+}
+
+# func_cl_wrapper cl arg...
+# Adjust compile command to suit cl
+func_cl_wrapper ()
+{
+  # Assume a capable shell
+  lib_path=
+  shared=:
+  linker_opts=
+  for arg
+  do
+    if test -n "$eat"; then
+      eat=
+    else
+      case $1 in
+	-o)
+	  # configure might choose to run compile as 'compile cc -o foo foo.c'.
+	  eat=1
+	  case $2 in
+	    *.o | *.[oO][bB][jJ])
+	      func_file_conv "$2"
+	      set x "$@" -Fo"$file"
+	      shift
+	      ;;
+	    *)
+	      func_file_conv "$2"
+	      set x "$@" -Fe"$file"
+	      shift
+	      ;;
+	  esac
+	  ;;
+	-I)
+	  eat=1
+	  func_file_conv "$2" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-I*)
+	  func_file_conv "${1#-I}" mingw
+	  set x "$@" -I"$file"
+	  shift
+	  ;;
+	-l)
+	  eat=1
+	  func_cl_dashl "$2"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-l*)
+	  func_cl_dashl "${1#-l}"
+	  set x "$@" "$lib"
+	  shift
+	  ;;
+	-L)
+	  eat=1
+	  func_cl_dashL "$2"
+	  ;;
+	-L*)
+	  func_cl_dashL "${1#-L}"
+	  ;;
+	-static)
+	  shared=false
+	  ;;
+	-Wl,*)
+	  arg=${1#-Wl,}
+	  save_ifs="$IFS"; IFS=','
+	  for flag in $arg; do
+	    IFS="$save_ifs"
+	    linker_opts="$linker_opts $flag"
+	  done
+	  IFS="$save_ifs"
+	  ;;
+	-Xlinker)
+	  eat=1
+	  linker_opts="$linker_opts $2"
+	  ;;
+	-*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+	*.cc | *.CC | *.cxx | *.CXX | *.[cC]++)
+	  func_file_conv "$1"
+	  set x "$@" -Tp"$file"
+	  shift
+	  ;;
+	*.c | *.cpp | *.CPP | *.lib | *.LIB | *.Lib | *.OBJ | *.obj | *.[oO])
+	  func_file_conv "$1" mingw
+	  set x "$@" "$file"
+	  shift
+	  ;;
+	*)
+	  set x "$@" "$1"
+	  shift
+	  ;;
+      esac
+    fi
+    shift
+  done
+  if test -n "$linker_opts"; then
+    linker_opts="-link$linker_opts"
+  fi
+  exec "$@" $linker_opts
+  exit 1
+}
+
+eat=
+
+case $1 in
+  '')
+     echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+     exit 1;
+     ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: compile [--help] [--version] PROGRAM [ARGS]
+
+Wrapper for compilers which do not understand '-c -o'.
+Remove '-o dest.o' from ARGS, run PROGRAM with the remaining
+arguments, and rename the output as expected.
+
+If you are trying to build a whole package this is not the
+right script to run: please start by reading the file 'INSTALL'.
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "compile $scriptversion"
+    exit $?
+    ;;
+  cl | *[/\\]cl | cl.exe | *[/\\]cl.exe | \
+  icl | *[/\\]icl | icl.exe | *[/\\]icl.exe )
+    func_cl_wrapper "$@"      # Doesn't return...
+    ;;
+esac
+
+ofile=
+cfile=
+
+for arg
+do
+  if test -n "$eat"; then
+    eat=
+  else
+    case $1 in
+      -o)
+	# configure might choose to run compile as 'compile cc -o foo foo.c'.
+	# So we strip '-o arg' only if arg is an object.
+	eat=1
+	case $2 in
+	  *.o | *.obj)
+	    ofile=$2
+	    ;;
+	  *)
+	    set x "$@" -o "$2"
+	    shift
+	    ;;
+	esac
+	;;
+      *.c)
+	cfile=$1
+	set x "$@" "$1"
+	shift
+	;;
+      *)
+	set x "$@" "$1"
+	shift
+	;;
+    esac
+  fi
+  shift
+done
+
+if test -z "$ofile" || test -z "$cfile"; then
+  # If no '-o' option was seen then we might have been invoked from a
+  # pattern rule where we don't need one.  That is ok -- this is a
+  # normal compilation that the losing compiler can handle.  If no
+  # '.c' file was seen then we are probably linking.  That is also
+  # ok.
+  exec "$@"
+fi
+
+# Name of file we expect compiler to create.
+cofile=`echo "$cfile" | sed 's|^.*[\\/]||; s|^[a-zA-Z]:||; s/\.c$/.o/'`
+
+# Create the lock directory.
+# Note: use '[/\\:.-]' here to ensure that we don't use the same name
+# that we are using for the .o file.  Also, base the name on the expected
+# object file name, since that is what matters with a parallel build.
+lockdir=`echo "$cofile" | sed -e 's|[/\\:.-]|_|g'`.d
+while true; do
+  if mkdir "$lockdir" >/dev/null 2>&1; then
+    break
+  fi
+  sleep 1
+done
+# FIXME: race condition here if user kills between mkdir and trap.
+trap "rmdir '$lockdir'; exit 1" 1 2 15
+
+# Run the compile.
+"$@"
+ret=$?
+
+if test -f "$cofile"; then
+  test "$cofile" = "$ofile" || mv "$cofile" "$ofile"
+elif test -f "${cofile}bj"; then
+  test "${cofile}bj" = "$ofile" || mv "${cofile}bj" "$ofile"
+fi
+
+rmdir "$lockdir"
+exit $ret
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:

configure.ac

@@ -1,190 +1,365 @@
-#                                               -*- Autoconf -*-
+# IJG auto-configuration source file.
 # Process this file with autoconf to produce a configure script.
 
-AC_PREREQ([2.56])
-AC_INIT([libjpeg-turbo], [1.0.1])
-BUILD=`date +%Y%m%d`
+#
+# Configure script for IJG libjpeg
+#
 
-AM_INIT_AUTOMAKE([-Wall foreign dist-bzip2])
-AC_PREFIX_DEFAULT(/opt/libjpeg-turbo)
+AC_INIT([libjpeg], [9.3.0])
 
-# Always build with prototypes
-AC_DEFINE([HAVE_PROTOTYPES], 1, [Define if your compiler supports prototypes])
+# Directory where autotools helper scripts lives.
+AC_CONFIG_AUX_DIR([.])
 
-# Checks for programs.
-SAVED_CFLAGS=${CFLAGS}
-SAVED_CXXFLAGS=${CXXFLAGS}
-AC_PROG_CPP
+# Generate configuration headers.
+AC_CONFIG_HEADERS([jconfig.h:jconfig.cfg])
+
+# Hack: disable autoheader so that it doesn't overwrite our cfg template.
+AUTOHEADER="echo autoheader ignored"
+
+# Check system type
+AC_CANONICAL_TARGET
+
+# Initialize Automake
+# Don't require all the GNU mandated files
+AM_INIT_AUTOMAKE([-Wall -Werror no-dist foreign])
+
+# Make --enable-silent-rules the default.
+# To get verbose build output you may configure
+# with --disable-silent-rules or use "make V=1".
+AM_SILENT_RULES([yes])
+
+# Add configure option --enable-maintainer-mode which enables
+# dependency checking and generation useful to package maintainers.
+# This is made an option to avoid confusing end users.
+AM_MAINTAINER_MODE
+
+# Check for programs
 AC_PROG_CC
-AC_PROG_CXX
+AC_PROG_CC_STDC
+AC_PROG_CPP
 AC_PROG_INSTALL
-AC_PROG_LIBTOOL
+AC_PROG_MAKE_SET
 AC_PROG_LN_S
+AM_PROG_AR
 
-# Check whether compiler supports pointers to undefined structures
-AC_MSG_CHECKING(whether compiler supports pointers to undefined structures)
-AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ], ,
-AC_MSG_RESULT(yes),
-[AC_MSG_RESULT(no)
-AC_DEFINE([INCOMPLETE_TYPES_BROKEN],[1],[Compiler does not support pointers to undefined structures.])])
+# Check if LD supports linker scripts,
+# and define automake conditional HAVE_LD_VERSION_SCRIPT if so.
+AC_ARG_ENABLE([ld-version-script],
+  AS_HELP_STRING([--enable-ld-version-script],
+    [enable linker version script (default is enabled when possible)]),
+    [have_ld_version_script=$enableval], [])
+if test -z "$have_ld_version_script"; then
+  AC_MSG_CHECKING([if LD -Wl,--version-script works])
+  save_LDFLAGS="$LDFLAGS"
+  LDFLAGS="$LDFLAGS -Wl,--version-script=conftest.map"
+  cat > conftest.map <<EOF
+VERS_1 {
+        global: sym;
+};
 
-AC_MSG_CHECKING([whether the linker supports version scripts])
-VERSION_SCRIPT=no
-LDVER=`$LD --help </dev/null 2>&1 | grep "\-\-version-script"`
-if test "$LDVER"; then
-  VERSION_SCRIPT=yes
-  VERSION_SCRIPT_FLAG=-Wl,--version-script,
-  AC_MSG_RESULT(yes)
+VERS_2 {
+        global: sym;
+} VERS_1;
+EOF
+  AC_LINK_IFELSE([AC_LANG_PROGRAM([], [])],
+                 [have_ld_version_script=yes], [have_ld_version_script=no])
+  rm -f conftest.map
+  LDFLAGS="$save_LDFLAGS"
+  AC_MSG_RESULT($have_ld_version_script)
+fi
+AM_CONDITIONAL(HAVE_LD_VERSION_SCRIPT, test "$have_ld_version_script" = "yes")
+
+# See if compiler supports prototypes.
+AC_MSG_CHECKING([for function prototypes])
+AC_CACHE_VAL([ijg_cv_have_prototypes],
+[AC_COMPILE_IFELSE([AC_LANG_SOURCE([[
+int testfunction (int arg1, int * arg2); /* check prototypes */
+struct methods_struct {		/* check method-pointer declarations */
+  int (*error_exit) (char *msgtext);
+  int (*trace_message) (char *msgtext);
+  int (*another_method) (void);
+};
+int testfunction (int arg1, int * arg2) /* check definitions */
+{ return arg2[arg1]; }
+int test2function (void)	/* check void arg list */
+{ return 0; }
+]])],
+          [ijg_cv_have_prototypes=yes],
+          [ijg_cv_have_prototypes=no])])
+AC_MSG_RESULT([$ijg_cv_have_prototypes])
+if test $ijg_cv_have_prototypes = yes; then
+  AC_DEFINE([HAVE_PROTOTYPES],[1],[Compiler supports function prototypes.])
 else
-  LDVER=`$LD --help </dev/null 2>&1 | grep "\-M"`
-  if test "$LDVER"; then
-    VERSION_SCRIPT=yes
-    VERSION_SCRIPT_FLAG=-Wl,-M,
-    AC_MSG_RESULT(yes)
-  else
-    AC_MSG_RESULT(no)
+  AC_MSG_WARN([Your compiler does not seem to know about function prototypes.
+    Perhaps it needs a special switch to enable ANSI C mode.
+    If so, we recommend running configure like this:
+       ./configure  CC='cc -switch'
+    where -switch is the proper switch.])
+fi
+
+# Check header files
+AC_CHECK_HEADERS([stddef.h stdlib.h locale.h])
+AC_CHECK_HEADER([string.h], [],
+ [AC_DEFINE([NEED_BSD_STRINGS], [1],
+            [Compiler has <strings.h> rather than standard <string.h>.])])
+
+# See whether type size_t is defined in any ANSI-standard places;
+# if not, perhaps it is defined in <sys/types.h>.
+AC_MSG_CHECKING([for size_t])
+AC_TRY_COMPILE([
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
+#ifdef NEED_BSD_STRINGS
+#include <strings.h>
+#else
+#include <string.h>
+#endif
+typedef size_t my_size_t;
+],
+      [ my_size_t foovar; ],
+      [ijg_size_t_ok=yes],
+      [ijg_size_t_ok="not ANSI, perhaps it is in sys/types.h"])
+AC_MSG_RESULT([$ijg_size_t_ok])
+if test "$ijg_size_t_ok" != yes; then
+  AC_CHECK_HEADER([sys/types.h],
+     [AC_DEFINE([NEED_SYS_TYPES_H], [1],
+                [Need to include <sys/types.h> in order to obtain size_t.])
+      AC_EGREP_CPP([size_t], [#include <sys/types.h>],
+                   [ijg_size_t_ok="size_t is in sys/types.h"],
+                   [ijg_size_t_ok=no])],
+     [ijg_size_t_ok=no])
+  AC_MSG_RESULT([$ijg_size_t_ok])
+  if test "$ijg_size_t_ok" = no; then
+    AC_MSG_WARN([Type size_t is not defined in any of the usual places.
+      Try putting '"typedef unsigned int size_t;"' in jconfig.h.])
   fi
 fi
 
-AM_CONDITIONAL(VERSION_SCRIPT, test "x$VERSION_SCRIPT" = "xyes")
-AC_SUBST(VERSION_SCRIPT_FLAG)
+# Check compiler characteristics
+AC_MSG_CHECKING([for type unsigned char])
+AC_TRY_COMPILE([], [ unsigned char un_char; ],
+ [AC_MSG_RESULT(yes)
+  AC_DEFINE([HAVE_UNSIGNED_CHAR], [1],
+            [Compiler supports 'unsigned char'.])],
+ [AC_MSG_RESULT(no)])
 
-if test "x${GCC}" = "xyes"; then
-  if test "x${SAVED_CFLAGS}" = "x"; then
-    CFLAGS=-O3
-  fi
-  if test "x${SAVED_CXXFLAGS}" = "x"; then
-    CXXFLAGS=-O3
-  fi
-fi
+AC_MSG_CHECKING([for type unsigned short])
+AC_TRY_COMPILE([], [ unsigned short un_short; ],
+  [AC_MSG_RESULT(yes)
+   AC_DEFINE([HAVE_UNSIGNED_SHORT], [1],
+             [Compiler supports 'unsigned short'.])],
+  [AC_MSG_RESULT(no)])
 
-AC_CHECK_DECL([__SUNPRO_C], [SUNCC="yes"], [SUNCC="no"])
-if test "x${SUNCC}" = "xyes"; then
-  if test "x${SAVED_CFLAGS}" = "x"; then
-    CFLAGS=-xO5
-  fi
-  if test "x${SAVED_CXXFLAGS}" = "x"; then
-    CXXFLAGS=-xO5
-  fi
-fi
+AC_MSG_CHECKING([for type void])
+AC_TRY_COMPILE([
+/* Caution: a C++ compiler will insist on valid prototypes */
+typedef void * void_ptr;	/* check void * */
+#ifdef HAVE_PROTOTYPES		/* check ptr to function returning void */
+typedef void (*void_func) (int a, int b);
+#else
+typedef void (*void_func) ();
+#endif
 
-# Checks for libraries.
-
-# Checks for header files.
-AC_HEADER_STDC
-AC_CHECK_HEADERS([stddef.h stdlib.h string.h])
-AC_CHECK_HEADER([sys/types.h], AC_DEFINE([NEED_SYS_TYPES_H], 1, [Define if you have sys/types.h]))
-
-# Checks for typedefs, structures, and compiler characteristics.
+#ifdef HAVE_PROTOTYPES		/* check void function result */
+void test3function (void_ptr arg1, void_func arg2)
+#else
+void test3function (arg1, arg2)
+     void_ptr arg1;
+     void_func arg2;
+#endif
+{
+  char * locptr = (char *) arg1; /* check casting to and from void * */
+  arg1 = (void *) locptr;
+  (*arg2) (1, 2);		/* check call of fcn returning void */
+}
+], [ ],
+        [AC_MSG_RESULT(yes)],
+        [AC_MSG_RESULT(no)
+         AC_DEFINE([void], [char],
+                   [Define 'void' as 'char' for archaic compilers
+                    that don't understand it.])])
 AC_C_CONST
-AC_C_CHAR_UNSIGNED
-AC_C_INLINE
-AC_TYPE_SIZE_T
-AC_CHECK_TYPES([unsigned char, unsigned short])
 
-AC_MSG_CHECKING([if right shift is signed])
-AC_TRY_RUN(
-	[#include <stdio.h>
-	 int is_shifting_signed (long arg) {
-	 long res = arg >> 4;
+# Check for non-broken inline under various spellings
+AC_MSG_CHECKING([for inline])
+ijg_cv_inline=""
+AC_TRY_COMPILE([], [} __inline__ int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="__inline__",
+[AC_TRY_COMPILE(, [} __inline int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="__inline",
+[AC_TRY_COMPILE(, [} inline int foo() { return 0; }
+int bar() { return foo();], ijg_cv_inline="inline")])])
+AC_MSG_RESULT($ijg_cv_inline)
+AC_DEFINE_UNQUOTED([INLINE], [$ijg_cv_inline],
+                   [How to obtain function inlining.])
 
-	 if (res == -0x7F7E80CL)
-		return 1; /* right shift is signed */
+# We cannot check for bogus warnings, but at least we can check for errors
+AC_MSG_CHECKING([for broken incomplete types])
+AC_TRY_COMPILE([ typedef struct undefined_structure * undef_struct_ptr; ],
+               [],
+               [AC_MSG_RESULT(ok)],
+               [AC_MSG_RESULT(broken)
+                AC_DEFINE([INCOMPLETE_TYPES_BROKEN], [1],
+                          [Compiler does not support pointers to unspecified
+                           structures.])])
 
-	 /* see if unsigned-shift hack will fix it. */
-	 /* we can't just test exact value since it depends on width of long... */
-	 res |= (~0L) << (32-4);
-	 if (res == -0x7F7E80CL)
-		return 0; /* right shift is unsigned */
-
-	 printf("Right shift isn't acting as I expect it to.\n");
-	 printf("I fear the JPEG software will not work at all.\n\n");
-	 return 0; /* try it with unsigned anyway */
-	 }
-	 int main (void) {
-		exit(is_shifting_signed(-0x7F7E80B1L));
-	 }],
-	[AC_MSG_RESULT(no)
-	 AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], 1, [Define if shift is unsigned])],
-	[AC_MSG_RESULT(yes)],
-	[AC_MSG_RESULT(Assuming that right shift is signed on target machine.)])
-
-# test whether global names are unique to at least 15 chars
+# Test whether global names are unique to at least 15 chars
 AC_MSG_CHECKING([for short external names])
-AC_TRY_LINK(
-	[int possibly_duplicate_function () { return 0; }
-	 int possibly_dupli_function () { return 1; }], [ ],
-	[AC_MSG_RESULT(ok)],
-	[AC_MSG_RESULT(short)
-	 AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], 1, [Define if you need short function names])])
+AC_TRY_LINK([
+int possibly_duplicate_function () { return 0; }
+int possibly_dupli_function () { return 1; }
+], [],
+            [AC_MSG_RESULT(ok)],
+            [AC_MSG_RESULT(short)
+             AC_DEFINE([NEED_SHORT_EXTERNAL_NAMES], [1],
+                       [Linker requires that global names be unique in
+                        first 15 characters.])])
 
-# Checks for library functions.
-AC_CHECK_FUNCS([memset memcpy], [],
-	[AC_DEFINE([NEED_BSD_STRINGS], 1,
-		   [Define if you have BSD-like bzero and bcopy])])
+# Run-time checks
+AC_MSG_CHECKING([to see if char is signed])
+AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
+#ifdef HAVE_PROTOTYPES
+int is_char_signed (int arg)
+#else
+int is_char_signed (arg)
+     int arg;
+#endif
+{
+  if (arg == 189) {		/* expected result for unsigned char */
+    return 0;			/* type char is unsigned */
+  }
+  else if (arg != -67) {	/* expected result for signed char */
+    printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n");
+    printf("I fear the JPEG software will not work at all.\n\n");
+  }
+  return 1;			/* assume char is signed otherwise */
+}
+char signed_char_check = (char) (-67);
+int main() {
+  exit(is_char_signed((int) signed_char_check));
+}], [AC_MSG_RESULT(no)
+     AC_DEFINE([CHAR_IS_UNSIGNED], [1],
+               [Characters are unsigned])],
+               [AC_MSG_RESULT(yes)],
+[AC_MSG_WARN([Assuming that char is signed on target machine.
+    If it is unsigned, this will be a little bit inefficient.])
+])
 
-# Set flags to indicate platform
-case "$host_os" in
-  cygwin* | mingw* | pw32* | interix*)
-    is_win32=1
-  ;;
-esac
-AM_CONDITIONAL([IS_WIN32], [test "x$is_win32" = "x1"])
+AC_MSG_CHECKING([to see if right shift is signed])
+AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
+#ifdef HAVE_PROTOTYPES
+int is_shifting_signed (long arg)
+#else
+int is_shifting_signed (arg)
+     long arg;
+#endif
+/* See whether right-shift on a long is signed or not. */
+{
+  long res = arg >> 4;
 
-# SIMD is optional
-AC_ARG_WITH([simd],
-    AC_HELP_STRING([--without-simd],[Omit accelerated SIMD routines.]))
-if test "x${with_simd}" != "xno"; then
-  # Check if we're on a supported CPU
-  AC_MSG_CHECKING([if we have SIMD optimisations for cpu type])
-  case "$host_cpu" in
-    x86_64 | amd64)
-      AC_MSG_RESULT([yes (x86_64)])
-      AC_PROG_NASM
-      simd_arch=x86_64
-    ;;
-    i*86 | x86 | ia32)
-      AC_MSG_RESULT([yes (i386)])
-      AC_PROG_NASM
-      simd_arch=i386
-    ;;
-    *)
-      AC_MSG_RESULT([no ("$host_cpu")])
-      AC_MSG_WARN([SIMD support not available for this CPU.  Performance will suffer.])
-      with_simd=no;
-    ;;
-  esac
+  if (res == -0x7F7E80CL) {	/* expected result for signed shift */
+    return 1;			/* right shift is signed */
+  }
+  /* see if unsigned-shift hack will fix it. */
+  /* we can't just test exact value since it depends on width of long... */
+  res |= (~0L) << (32-4);
+  if (res == -0x7F7E80CL) {	/* expected result now? */
+    return 0;			/* right shift is unsigned */
+  }
+  printf("Right shift isn't acting as I expect it to.\n");
+  printf("I fear the JPEG software will not work at all.\n\n");
+  return 0;			/* try it with unsigned anyway */
+}
+int main() {
+  exit(is_shifting_signed(-0x7F7E80B1L));
+}],
+      [AC_MSG_RESULT(no)
+       AC_DEFINE([RIGHT_SHIFT_IS_UNSIGNED], [1],
+                 [Broken compiler shifts signed values as an unsigned shift.])],
+       [AC_MSG_RESULT(yes)],
+       [AC_MSG_RESULT(Assuming that right shift is signed on target machine.)])
 
-  if test "x${with_simd}" != "xno"; then
-    AC_DEFINE([WITH_SIMD], [1], [Use accelerated SIMD routines.])
-  fi
+AC_MSG_CHECKING([to see if fopen accepts b spec])
+AC_TRY_RUN([
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#include <stdio.h>
+int main() {
+  if (fopen("conftestdata", "wb") != NULL)
+    exit(0);
+  exit(1);
+}],
+          [AC_MSG_RESULT(yes)],
+          [AC_MSG_RESULT(no)
+           AC_DEFINE([DONT_USE_B_MODE], [1],
+                     [Don't open files in binary mode.])],
+          [AC_MSG_RESULT(Assuming that it does.)])
+
+# Configure libtool
+AC_LIBTOOL_WIN32_DLL
+AC_PROG_LIBTOOL
+
+# Select memory manager depending on user input.
+# If no "-enable-maxmem", use jmemnobs
+MEMORYMGR='jmemnobs'
+MAXMEM="no"
+AC_ARG_ENABLE([maxmem],
+[  --enable-maxmem[=N]     enable use of temp files, set max mem usage to N MB],
+[MAXMEM="$enableval"])
+dnl [# support --with-maxmem for backwards compatibility with IJG V5.]
+dnl AC_ARG_WITH(maxmem, , MAXMEM="$withval")
+if test "x$MAXMEM" = xyes; then
+  MAXMEM=1
 fi
+if test "x$MAXMEM" != xno; then
+  if test -n "`echo $MAXMEM | sed 's/[[0-9]]//g'`"; then
+    AC_MSG_ERROR(non-numeric argument to --enable-maxmem)
+  fi
+  DEFAULTMAXMEM=`expr $MAXMEM \* 1048576`
+  AC_DEFINE_UNQUOTED([DEFAULT_MAX_MEM], [${DEFAULTMAXMEM}],
+                     [Maximum data space library will allocate.])
+  AC_MSG_CHECKING([for 'tmpfile()'])
+  AC_TRY_LINK([#include <stdio.h>], [ FILE * tfile = tmpfile(); ],
+    [AC_MSG_RESULT(yes)
+    MEMORYMGR='jmemansi'],
+    [AC_MSG_RESULT(no)
+    dnl if tmpfile is not present, must use jmemname.
+    MEMORYMGR='jmemname'
 
-AM_CONDITIONAL([WITH_SIMD], [test "x$with_simd" != "xno"])
-AM_CONDITIONAL([SIMD_I386], [test "x$simd_arch" = "xi386"])
-AM_CONDITIONAL([SIMD_X86_64], [test "x$simd_arch" = "xx86_64"])
-AM_CONDITIONAL([X86_64], [test "x$host_cpu" = "xx86_64" -o "x$host_cpu" = "xamd64"])
+    # Test for the need to remove temporary files using a signal handler
+    # (for cjpeg/djpeg)
+    AC_DEFINE([NEED_SIGNAL_CATCHER], [1],
+              [Need signal handler to clean up temporary files.])
+    AC_MSG_CHECKING([for 'mktemp()'])
+    AC_TRY_LINK([], [ char fname[80]; mktemp(fname); ],
+                [AC_MSG_RESULT(yes)],
+                [AC_MSG_RESULT(no)
+                 AC_DEFINE([NO_MKTEMP], [1],
+                           [The mktemp() function is not available.])])])
+fi
+AC_SUBST([MEMORYMGR])
 
-case "$host_cpu" in
-  x86_64)
-    RPMARCH=x86_64
-    DEBARCH=amd64
-    ;;
-  i*86 | x86 | ia32)
-    RPMARCH=i386
-    DEBARCH=i386
-    ;;
-esac
+# Extract the library version IDs from jpeglib.h.
+AC_MSG_CHECKING([libjpeg version number])
+[major=`sed -ne 's/^#define JPEG_LIB_VERSION_MAJOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`
+minor=`sed -ne 's/^#define JPEG_LIB_VERSION_MINOR *\([0-9][0-9]*\).*$/\1/p' $srcdir/jpeglib.h`]
+AC_SUBST([JPEG_LIB_VERSION],
+         [`expr $major + $minor`:0:$minor])
+AC_MSG_RESULT([$JPEG_LIB_VERSION])
 
-AC_SUBST(RPMARCH)
-AC_SUBST(DEBARCH)
-AC_SUBST(BUILD)
-
-# jconfig.h is the file we use, but we have another before that to
-# fool autoheader. the reason is that we include this header in our
-# API headers, which can screw things up for users of the lib.
-# jconfig.h is a minimal version that allows this package to be built
-AC_CONFIG_HEADERS([config.h])
-AC_CONFIG_HEADERS([jconfig.h])
-AC_CONFIG_FILES([Makefile simd/Makefile])
+AC_CONFIG_FILES([Makefile libjpeg.pc])
 AC_OUTPUT

depcomp

@@ -0,0 +1,791 @@
+#! /bin/sh
+# depcomp - compile a program generating dependencies as side-effects
+
+scriptversion=2016-01-11.22; # UTC
+
+# Copyright (C) 1999-2017 Free Software Foundation, Inc.
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2, or (at your option)
+# any later version.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# As a special exception to the GNU General Public License, if you
+# distribute this file as part of a program that contains a
+# configuration script generated by Autoconf, you may include it under
+# the same distribution terms that you use for the rest of that program.
+
+# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
+
+case $1 in
+  '')
+    echo "$0: No command.  Try '$0 --help' for more information." 1>&2
+    exit 1;
+    ;;
+  -h | --h*)
+    cat <<\EOF
+Usage: depcomp [--help] [--version] PROGRAM [ARGS]
+
+Run PROGRAMS ARGS to compile a file, generating dependencies
+as side-effects.
+
+Environment variables:
+  depmode     Dependency tracking mode.
+  source      Source file read by 'PROGRAMS ARGS'.
+  object      Object file output by 'PROGRAMS ARGS'.
+  DEPDIR      directory where to store dependencies.
+  depfile     Dependency file to output.
+  tmpdepfile  Temporary file to use when outputting dependencies.
+  libtool     Whether libtool is used (yes/no).
+
+Report bugs to <bug-automake@gnu.org>.
+EOF
+    exit $?
+    ;;
+  -v | --v*)
+    echo "depcomp $scriptversion"
+    exit $?
+    ;;
+esac
+
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'.  Note that this directory component will
+# be either empty or ending with a '/' character.  This is deliberate.
+set_dir_from ()
+{
+  case $1 in
+    */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+      *) dir=;;
+  esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+  base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+  echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+  # If the compiler actually managed to produce a dependency file,
+  # post-process it.
+  if test -f "$tmpdepfile"; then
+    # Each line is of the form 'foo.o: dependency.h'.
+    # Do two passes, one to just change these to
+    #   $object: dependency.h
+    # and one to simply output
+    #   dependency.h:
+    # which is needed to avoid the deleted-header problem.
+    { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+      sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+    } > "$depfile"
+    rm -f "$tmpdepfile"
+  else
+    make_dummy_depfile
+  fi
+}
+
+# A tabulation character.
+tab='	'
+# A newline character.
+nl='
+'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
+
+if test -z "$depmode" || test -z "$source" || test -z "$object"; then
+  echo "depcomp: Variables source, object and depmode must be set" 1>&2
+  exit 1
+fi
+
+# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
+depfile=${depfile-`echo "$object" |
+  sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
+tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
+
+rm -f "$tmpdepfile"
+
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
+# Some modes work just like other modes, but use different flags.  We
+# parameterize here, but still list the modes in the big case below,
+# to make depend.m4 easier to write.  Note that we *cannot* use a case
+# here, because this file can only contain one case statement.
+if test "$depmode" = hp; then
+  # HP compiler uses -M and no extra arg.
+  gccflag=-M
+  depmode=gcc
+fi
+
+if test "$depmode" = dashXmstdout; then
+  # This is just like dashmstdout with a different argument.
+  dashmflag=-xM
+  depmode=dashmstdout
+fi
+
+cygpath_u="cygpath -u -f -"
+if test "$depmode" = msvcmsys; then
+  # This is just like msvisualcpp but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvisualcpp
+fi
+
+if test "$depmode" = msvc7msys; then
+  # This is just like msvc7 but w/o cygpath translation.
+  # Just convert the backslash-escaped backslashes to single forward
+  # slashes to satisfy depend.m4
+  cygpath_u='sed s,\\\\,/,g'
+  depmode=msvc7
+fi
+
+if test "$depmode" = xlc; then
+  # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+  gccflag=-qmakedep=gcc,-MF
+  depmode=gcc
+fi
+
+case "$depmode" in
+gcc3)
+## gcc 3 implements dependency tracking that does exactly what
+## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
+## it if -MD -MP comes after the -MF stuff.  Hmm.
+## Unfortunately, FreeBSD c89 acceptance of flags depends upon
+## the command line argument order; so add the flags where they
+## appear in depend2.am.  Note that the slowdown incurred here
+## affects only configure: in makefiles, %FASTDEP% shortcuts this.
+  for arg
+  do
+    case $arg in
+    -c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
+    *)  set fnord "$@" "$arg" ;;
+    esac
+    shift # fnord
+    shift # $arg
+  done
+  "$@"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  mv "$tmpdepfile" "$depfile"
+  ;;
+
+gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
+## There are various ways to get dependency output from gcc.  Here's
+## why we pick this rather obscure method:
+## - Don't want to use -MD because we'd like the dependencies to end
+##   up in a subdir.  Having to rename by hand is ugly.
+##   (We might end up doing this anyway to support other compilers.)
+## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
+##   -MM, not -M (despite what the docs say).  Also, it might not be
+##   supported by the other compilers which use the 'gcc' depmode.
+## - Using -M directly means running the compiler twice (even worse
+##   than renaming).
+  if test -z "$gccflag"; then
+    gccflag=-MD,
+  fi
+  "$@" -Wp,"$gccflag$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The second -e expression handles DOS-style file names with drive
+  # letters.
+  sed -e 's/^[^:]*: / /' \
+      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
+## This next piece of magic avoids the "deleted header file" problem.
+## The problem is that when a header file which appears in a .P file
+## is deleted, the dependency causes make to die (because there is
+## typically no way to rebuild the header).  We avoid this by adding
+## dummy dependencies for each header file.  Too bad gcc doesn't do
+## this for us directly.
+## Some versions of gcc put a space before the ':'.  On the theory
+## that the space means something, we add a space to the output as
+## well.  hp depmode also adds that space, but also prefixes the VPATH
+## to the object.  Take care to not repeat it in the output.
+## Some versions of the HPUX 10.20 sed can't process this invocation
+## correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+sgi)
+  if test "$libtool" = yes; then
+    "$@" "-Wp,-MDupdate,$tmpdepfile"
+  else
+    "$@" -MDupdate "$tmpdepfile"
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+
+  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
+    echo "$object : \\" > "$depfile"
+    # Clip off the initial element (the dependent).  Don't try to be
+    # clever and replace this with sed code, as IRIX sed won't handle
+    # lines with more than a fixed number of characters (4096 in
+    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
+    # the IRIX cc adds comments like '#:fec' to the end of the
+    # dependency line.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+      | tr "$nl" ' ' >> "$depfile"
+    echo >> "$depfile"
+    # The second pass generates a dummy entry for each header file.
+    tr ' ' "$nl" < "$tmpdepfile" \
+      | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+      >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile"
+  ;;
+
+xlc)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+aix)
+  # The C for AIX Compiler uses -M and outputs the dependencies
+  # in a .u file.  In older versions, this file always lives in the
+  # current directory.  Also, the AIX compiler puts '$object:' at the
+  # start of each line; $object doesn't have directory information.
+  # Version 6 uses the directory in both cases.
+  set_dir_from "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$base.u
+    tmpdepfile3=$dir.libs/$base.u
+    "$@" -Wc,-M
+  else
+    tmpdepfile1=$dir$base.u
+    tmpdepfile2=$dir$base.u
+    tmpdepfile3=$dir$base.u
+    "$@" -M
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  aix_post_process_depfile
+  ;;
+
+tcc)
+  # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+  # FIXME: That version still under development at the moment of writing.
+  #        Make that this statement remains true also for stable, released
+  #        versions.
+  # It will wrap lines (doesn't matter whether long or short) with a
+  # trailing '\', as in:
+  #
+  #   foo.o : \
+  #    foo.c \
+  #    foo.h \
+  #
+  # It will put a trailing '\' even on the last line, and will use leading
+  # spaces rather than leading tabs (at least since its commit 0394caf7
+  # "Emit spaces for -MD").
+  "$@" -MD -MF "$tmpdepfile"
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+  # We have to change lines of the first kind to '$object: \'.
+  sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+  # And for each line of the second kind, we have to emit a 'dep.h:'
+  # dummy dependency, to avoid the deleted-header problem.
+  sed -n -e 's|^  *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file.  A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+  # Portland's C compiler understands '-MD'.
+  # Will always output deps to 'file.d' where file is the root name of the
+  # source file under compilation, even if file resides in a subdirectory.
+  # The object file name does not affect the name of the '.d' file.
+  # pgcc 10.2 will output
+  #    foo.o: sub/foo.c sub/foo.h
+  # and will wrap long lines using '\' :
+  #    foo.o: sub/foo.c ... \
+  #     sub/foo.h ... \
+  #     ...
+  set_dir_from "$object"
+  # Use the source, not the object, to determine the base name, since
+  # that's sadly what pgcc will do too.
+  set_base_from "$source"
+  tmpdepfile=$base.d
+
+  # For projects that build the same source file twice into different object
+  # files, the pgcc approach of using the *source* file root name can cause
+  # problems in parallel builds.  Use a locking strategy to avoid stomping on
+  # the same $tmpdepfile.
+  lockdir=$base.d-lock
+  trap "
+    echo '$0: caught signal, cleaning up...' >&2
+    rmdir '$lockdir'
+    exit 1
+  " 1 2 13 15
+  numtries=100
+  i=$numtries
+  while test $i -gt 0; do
+    # mkdir is a portable test-and-set.
+    if mkdir "$lockdir" 2>/dev/null; then
+      # This process acquired the lock.
+      "$@" -MD
+      stat=$?
+      # Release the lock.
+      rmdir "$lockdir"
+      break
+    else
+      # If the lock is being held by a different process, wait
+      # until the winning process is done or we timeout.
+      while test -d "$lockdir" && test $i -gt 0; do
+        sleep 1
+        i=`expr $i - 1`
+      done
+    fi
+    i=`expr $i - 1`
+  done
+  trap - 1 2 13 15
+  if test $i -le 0; then
+    echo "$0: failed to acquire lock after $numtries attempts" >&2
+    echo "$0: check lockdir '$lockdir'" >&2
+    exit 1
+  fi
+
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  # Each line is of the form `foo.o: dependent.h',
+  # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
+  # Do two passes, one to just change these to
+  # `$object: dependent.h' and one to simply `dependent.h:'.
+  sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+hp2)
+  # The "hp" stanza above does not work with aCC (C++) and HP's ia64
+  # compilers, which have integrated preprocessors.  The correct option
+  # to use with these is +Maked; it writes dependencies to a file named
+  # 'foo.d', which lands next to the object file, wherever that
+  # happens to be.
+  # Much of this is similar to the tru64 case; see comments there.
+  set_dir_from  "$object"
+  set_base_from "$object"
+  if test "$libtool" = yes; then
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir.libs/$base.d
+    "$@" -Wc,+Maked
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    "$@" +Maked
+  fi
+  stat=$?
+  if test $stat -ne 0; then
+     rm -f "$tmpdepfile1" "$tmpdepfile2"
+     exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  if test -f "$tmpdepfile"; then
+    sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
+    # Add 'dependent.h:' lines.
+    sed -ne '2,${
+               s/^ *//
+               s/ \\*$//
+               s/$/:/
+               p
+             }' "$tmpdepfile" >> "$depfile"
+  else
+    make_dummy_depfile
+  fi
+  rm -f "$tmpdepfile" "$tmpdepfile2"
+  ;;
+
+tru64)
+  # The Tru64 compiler uses -MD to generate dependencies as a side
+  # effect.  'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+  # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+  # dependencies in 'foo.d' instead, so we check for that too.
+  # Subdirectories are respected.
+  set_dir_from  "$object"
+  set_base_from "$object"
+
+  if test "$libtool" = yes; then
+    # Libtool generates 2 separate objects for the 2 libraries.  These
+    # two compilations output dependencies in $dir.libs/$base.o.d and
+    # in $dir$base.o.d.  We have to check for both files, because
+    # one of the two compilations can be disabled.  We should prefer
+    # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+    # automatically cleaned when .libs/ is deleted, while ignoring
+    # the former would cause a distcleancheck panic.
+    tmpdepfile1=$dir$base.o.d          # libtool 1.5
+    tmpdepfile2=$dir.libs/$base.o.d    # Likewise.
+    tmpdepfile3=$dir.libs/$base.d      # Compaq CCC V6.2-504
+    "$@" -Wc,-MD
+  else
+    tmpdepfile1=$dir$base.d
+    tmpdepfile2=$dir$base.d
+    tmpdepfile3=$dir$base.d
+    "$@" -MD
+  fi
+
+  stat=$?
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+    exit $stat
+  fi
+
+  for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+  do
+    test -f "$tmpdepfile" && break
+  done
+  # Same post-processing that is required for AIX mode.
+  aix_post_process_depfile
+  ;;
+
+msvc7)
+  if test "$libtool" = yes; then
+    showIncludes=-Wc,-showIncludes
+  else
+    showIncludes=-showIncludes
+  fi
+  "$@" $showIncludes > "$tmpdepfile"
+  stat=$?
+  grep -v '^Note: including file: ' "$tmpdepfile"
+  if test $stat -ne 0; then
+    rm -f "$tmpdepfile"
+    exit $stat
+  fi
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  # The first sed program below extracts the file names and escapes
+  # backslashes for cygpath.  The second sed program outputs the file
+  # name when reading, but also accumulates all include files in the
+  # hold buffer in order to output them again at the end.  This only
+  # works with sed implementations that can handle large buffers.
+  sed < "$tmpdepfile" -n '
+/^Note: including file:  *\(.*\)/ {
+  s//\1/
+  s/\\/\\\\/g
+  p
+}' | $cygpath_u | sort -u | sed -n '
+s/ /\\ /g
+s/\(.*\)/'"$tab"'\1 \\/p
+s/.\(.*\) \\/\1:/
+H
+$ {
+  s/.*/'"$tab"'/
+  G
+  p
+}' >> "$depfile"
+  echo >> "$depfile" # make sure the fragment doesn't end with a backslash
+  rm -f "$tmpdepfile"
+  ;;
+
+msvc7msys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+#nosideeffect)
+  # This comment above is used by automake to tell side-effect
+  # dependency tracking mechanisms from slower ones.
+
+dashmstdout)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout, regardless of -o.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  test -z "$dashmflag" && dashmflag=-M
+  # Require at least two characters before searching for ':'
+  # in the target name.  This is to cope with DOS-style filenames:
+  # a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
+  "$@" $dashmflag |
+    sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
+  rm -f "$depfile"
+  cat < "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process this sed invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  tr ' ' "$nl" < "$tmpdepfile" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+dashXmstdout)
+  # This case only exists to satisfy depend.m4.  It is never actually
+  # run, as this mode is specially recognized in the preamble.
+  exit 1
+  ;;
+
+makedepend)
+  "$@" || exit $?
+  # Remove any Libtool call
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+  # X makedepend
+  shift
+  cleared=no eat=no
+  for arg
+  do
+    case $cleared in
+    no)
+      set ""; shift
+      cleared=yes ;;
+    esac
+    if test $eat = yes; then
+      eat=no
+      continue
+    fi
+    case "$arg" in
+    -D*|-I*)
+      set fnord "$@" "$arg"; shift ;;
+    # Strip any option that makedepend may not understand.  Remove
+    # the object too, otherwise makedepend will parse it as a source file.
+    -arch)
+      eat=yes ;;
+    -*|$object)
+      ;;
+    *)
+      set fnord "$@" "$arg"; shift ;;
+    esac
+  done
+  obj_suffix=`echo "$object" | sed 's/^.*\././'`
+  touch "$tmpdepfile"
+  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
+  rm -f "$depfile"
+  # makedepend may prepend the VPATH from the source file name to the object.
+  # No need to regex-escape $object, excess matching of '.' is harmless.
+  sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
+  # Some versions of the HPUX 10.20 sed can't process the last invocation
+  # correctly.  Breaking it into two sed invocations is a workaround.
+  sed '1,2d' "$tmpdepfile" \
+    | tr ' ' "$nl" \
+    | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+    | sed -e 's/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile" "$tmpdepfile".bak
+  ;;
+
+cpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  # Remove '-o $object'.
+  IFS=" "
+  for arg
+  do
+    case $arg in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    *)
+      set fnord "$@" "$arg"
+      shift # fnord
+      shift # $arg
+      ;;
+    esac
+  done
+
+  "$@" -E \
+    | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+             -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+    | sed '$ s: \\$::' > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  cat < "$tmpdepfile" >> "$depfile"
+  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvisualcpp)
+  # Important note: in order to support this mode, a compiler *must*
+  # always write the preprocessed file to stdout.
+  "$@" || exit $?
+
+  # Remove the call to Libtool.
+  if test "$libtool" = yes; then
+    while test "X$1" != 'X--mode=compile'; do
+      shift
+    done
+    shift
+  fi
+
+  IFS=" "
+  for arg
+  do
+    case "$arg" in
+    -o)
+      shift
+      ;;
+    $object)
+      shift
+      ;;
+    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
+        set fnord "$@"
+        shift
+        shift
+        ;;
+    *)
+        set fnord "$@" "$arg"
+        shift
+        shift
+        ;;
+    esac
+  done
+  "$@" -E 2>/dev/null |
+  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
+  rm -f "$depfile"
+  echo "$object : \\" > "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
+  echo "$tab" >> "$depfile"
+  sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
+  rm -f "$tmpdepfile"
+  ;;
+
+msvcmsys)
+  # This case exists only to let depend.m4 do its work.  It works by
+  # looking at the text of this script.  This case will never be run,
+  # since it is checked for above.
+  exit 1
+  ;;
+
+none)
+  exec "$@"
+  ;;
+
+*)
+  echo "Unknown depmode $depmode" 1>&2
+  exit 1
+  ;;
+esac
+
+exit 0
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 2
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:

djpeg.1

@@ -1,4 +1,4 @@
-.TH DJPEG 1 "22 August 1997"
+.TH DJPEG 1 "26 July 2015"
 .SH NAME
 djpeg \- decompress a JPEG file to an image file
 .SH SYNOPSIS
@@ -55,15 +55,23 @@ default options are chosen for highest quality output.)  Currently, this is
 equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR.
 .TP
 .B \-grayscale
-Force gray-scale output even if JPEG file is color.  Useful for viewing on
-monochrome displays; also,
+Force grayscale output even if JPEG file is color.
+Useful for viewing on monochrome displays; also,
 .B djpeg
 runs noticeably faster in this mode.
 .TP
+.B \-rgb
+Force RGB output even if JPEG file is grayscale.
+This is provided to support applications that don't
+want to cope with grayscale as a separate case.
+.TP
 .BI \-scale " M/N"
-Scale the output image by a factor M/N.  Currently the scale factor must be
-1/1, 1/2, 1/4, or 1/8.  Scaling is handy if the image is larger than your
-screen; also,
+Scale the output image by a factor M/N.  Currently supported scale factors are
+M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for
+baseline JPEG.  If the /N part is omitted, then M specifies the DCT scaled
+size to be applied on the given input.  For baseline JPEG this is equivalent
+to M/8 scaling, since the source DCT size for baseline JPEG is 8.
+Scaling is handy if the image is larger than your screen; also,
 .B djpeg
 runs much faster when scaling down the output.
 .TP
@@ -73,7 +81,7 @@ emitted if
 .B \-colors
 or
 .B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
+is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
 format is emitted.
 .TP
 .B \-gif
@@ -87,12 +95,12 @@ emitted if
 .B \-colors
 or
 .B \-grayscale
-is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color
+is specified, or if the JPEG file is grayscale; otherwise, 24-bit full-color
 format is emitted.
 .TP
 .B \-pnm
 Select PBMPLUS (PPM/PGM) output format (this is the default format).
-PGM is emitted if the JPEG file is gray-scale or if
+PGM is emitted if the JPEG file is grayscale or if
 .B \-grayscale
 is specified; otherwise PPM is emitted.
 .TP
@@ -100,8 +108,8 @@ is specified; otherwise PPM is emitted.
 Select RLE output format.  (Requires URT library.)
 .TP
 .B \-targa
-Select Targa output format.  Gray-scale format is emitted if the JPEG file is
-gray-scale or if
+Select Targa output format.  Grayscale format is emitted if the JPEG file is
+grayscale or if
 .B \-grayscale
 is specified; otherwise, colormapped format is emitted if
 .B \-colors
@@ -150,7 +158,7 @@ and
 .BR \-onepass .
 .TP
 .B \-nosmooth
-Use a faster, lower-quality upsampling routine.
+Don't use high-quality upsampling.
 .TP
 .B \-onepass
 Use one-pass instead of two-pass color quantization.  The one-pass method is
@@ -159,7 +167,7 @@ faster and needs less memory, but it produces a lower-quality image.
 is ignored unless you also say
 .B \-colors
 .IR N .
-Also, the one-pass method is always used for gray-scale output (the two-pass
+Also, the one-pass method is always used for grayscale output (the two-pass
 method is no improvement then).
 .TP
 .BI \-maxmemory " N"
@@ -243,11 +251,7 @@ Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
 .SH AUTHOR
 Independent JPEG Group
 .SH BUGS
-Arithmetic coding is not supported for legal reasons.
-.PP
-To avoid the Unisys LZW patent,
+To avoid the Unisys LZW patent (now expired),
 .B djpeg
 produces uncompressed GIF files.  These are larger than they should be, but
 are readable by standard GIF decoders.
-.PP
-Still not as fast as we'd like.

djpeg.c

@@ -2,6 +2,7 @@
  * djpeg.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2009-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -101,6 +102,7 @@ usage (void)
   fprintf(stderr, "  -colors N      Reduce image to no more than N colors\n");
   fprintf(stderr, "  -fast          Fast, low-quality processing\n");
   fprintf(stderr, "  -grayscale     Force grayscale output\n");
+  fprintf(stderr, "  -rgb           Force RGB output\n");
 #ifdef IDCT_SCALING_SUPPORTED
   fprintf(stderr, "  -scale M/N     Scale output image by fraction M/N, eg, 1/8\n");
 #endif
@@ -263,6 +265,10 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       /* Force monochrome output. */
       cinfo->out_color_space = JCS_GRAYSCALE;
 
+    } else if (keymatch(arg, "rgb", 3)) {
+      /* Force RGB output. */
+      cinfo->out_color_space = JCS_RGB;
+
     } else if (keymatch(arg, "map", 3)) {
       /* Quantize to a color map taken from an input file. */
       if (++argn >= argc)	/* advance to next argument */
@@ -297,7 +303,7 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       cinfo->mem->max_memory_to_use = lval * 1000L;
 
     } else if (keymatch(arg, "nosmooth", 3)) {
-      /* Suppress fancy upsampling */
+      /* Suppress fancy upsampling. */
       cinfo->do_fancy_upsampling = FALSE;
 
     } else if (keymatch(arg, "onepass", 3)) {
@@ -326,8 +332,8 @@ parse_switches (j_decompress_ptr cinfo, int argc, char **argv,
       /* Scale the output image by a fraction M/N. */
       if (++argn >= argc)	/* advance to next argument */
 	usage();
-      if (sscanf(argv[argn], "%d/%d",
-		 &cinfo->scale_num, &cinfo->scale_denom) != 2)
+      if (sscanf(argv[argn], "%u/%u",
+		 &cinfo->scale_num, &cinfo->scale_denom) < 1)
 	usage();
 
     } else if (keymatch(arg, "targa", 1)) {

example.c

@@ -3,7 +3,7 @@
  *
  * This file illustrates how to use the IJG code as a subroutine library
  * to read or write JPEG image files.  You should look at this code in
- * conjunction with the documentation file libjpeg.doc.
+ * conjunction with the documentation file libjpeg.txt.
  *
  * This code will not do anything useful as-is, but it may be helpful as a
  * skeleton for constructing routines that call the JPEG library.  
@@ -196,7 +196,7 @@ write_JPEG_file (char * filename, int quality)
  * files for anything that doesn't fit within the maximum-memory setting.
  * (Note that temp files are NOT needed if you use the default parameters.)
  * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
  *
  * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG
  * files to be compatible with everyone else's.  If you cannot readily read
@@ -335,7 +335,7 @@ read_JPEG_file (char * filename)
   /* We can ignore the return value from jpeg_read_header since
    *   (a) suspension is not possible with the stdio data source, and
    *   (b) we passed TRUE to reject a tables-only JPEG file as an error.
-   * See libjpeg.doc for more info.
+   * See libjpeg.txt for more info.
    */
 
   /* Step 4: set parameters for decompression */
@@ -413,14 +413,14 @@ read_JPEG_file (char * filename)
  * In the above code, we ignored the return value of jpeg_read_scanlines,
  * which is the number of scanlines actually read.  We could get away with
  * this because we asked for only one line at a time and we weren't using
- * a suspending data source.  See libjpeg.doc for more info.
+ * a suspending data source.  See libjpeg.txt for more info.
  *
  * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress();
  * we should have done it beforehand to ensure that the space would be
  * counted against the JPEG max_memory setting.  In some systems the above
  * code would risk an out-of-memory error.  However, in general we don't
  * know the output image dimensions before jpeg_start_decompress(), unless we
- * call jpeg_calc_output_dimensions().  See libjpeg.doc for more about this.
+ * call jpeg_calc_output_dimensions().  See libjpeg.txt for more about this.
  *
  * Scanlines are returned in the same order as they appear in the JPEG file,
  * which is standardly top-to-bottom.  If you must emit data bottom-to-top,
@@ -429,5 +429,5 @@ read_JPEG_file (char * filename)
  *
  * As with compression, some operating modes may require temporary files.
  * On some systems you may need to set up a signal handler to ensure that
- * temporary files are deleted if the program is interrupted.  See libjpeg.doc.
+ * temporary files are deleted if the program is interrupted.  See libjpeg.txt.
  */

filelist.txt

@@ -1,6 +1,6 @@
 IJG JPEG LIBRARY:  FILE LIST
 
-Copyright (C) 1994-1998, Thomas G. Lane.
+Copyright (C) 1994-2017, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -28,8 +28,6 @@ jerror.h	Declares JPEG library's error and trace message codes.
 jinclude.h	Central include file used by all IJG .c files to reference
 		system include files.
 jpegint.h	JPEG library's internal data structures.
-jchuff.h	Private declarations for Huffman encoder modules.
-jdhuff.h	Private declarations for Huffman decoder modules.
 jdct.h		Private declarations for forward & reverse DCT subsystems.
 jmemsys.h	Private declarations for memory management subsystem.
 jversion.h	Version information.
@@ -72,10 +70,10 @@ jcdctmgr.c	DCT manager (DCT implementation selection & control).
 jfdctint.c	Forward DCT using slow-but-accurate integer method.
 jfdctfst.c	Forward DCT using faster, less accurate integer method.
 jfdctflt.c	Forward DCT using floating-point arithmetic.
-jchuff.c	Huffman entropy coding for sequential JPEG.
-jcphuff.c	Huffman entropy coding for progressive JPEG.
+jchuff.c	Huffman entropy coding.
+jcarith.c	Arithmetic entropy coding.
 jcmarker.c	JPEG marker writing.
-jdatadst.c	Data destination manager for stdio output.
+jdatadst.c	Data destination managers for memory and stdio output.
 
 Decompression side of the library:
 
@@ -85,23 +83,24 @@ jdmainct.c	Main buffer controller (JPEG decompressor => postprocessor).
 jdcoefct.c	Buffer controller for DCT coefficient buffer.
 jdpostct.c	Postprocessor buffer controller.
 jdmarker.c	JPEG marker reading.
-jdhuff.c	Huffman entropy decoding for sequential JPEG.
-jdphuff.c	Huffman entropy decoding for progressive JPEG.
+jdhuff.c	Huffman entropy decoding.
+jdarith.c	Arithmetic entropy decoding.
 jddctmgr.c	IDCT manager (IDCT implementation selection & control).
 jidctint.c	Inverse DCT using slow-but-accurate integer method.
 jidctfst.c	Inverse DCT using faster, less accurate integer method.
 jidctflt.c	Inverse DCT using floating-point arithmetic.
-jidctred.c	Inverse DCTs with reduced-size outputs.
 jdsample.c	Upsampling.
 jdcolor.c	Color space conversion.
 jdmerge.c	Merged upsampling/color conversion (faster, lower quality).
 jquant1.c	One-pass color quantization using a fixed-spacing colormap.
 jquant2.c	Two-pass color quantization using a custom-generated colormap.
 		Also handles one-pass quantization to an externally given map.
-jdatasrc.c	Data source manager for stdio input.
+jdatasrc.c	Data source managers for memory and stdio input.
 
 Support files for both compression and decompression:
 
+jaricom.c	Tables for common use in arithmetic entropy encoding and
+		decoding routines.
 jerror.c	Standard error handling routines (application replaceable).
 jmemmgr.c	System-independent (more or less) memory management code.
 jutils.c	Miscellaneous utility routines.
@@ -118,7 +117,7 @@ jmemdos.c	Custom implementation for MS-DOS (16-bit environment only):
 jmemmac.c	Custom implementation for Apple Macintosh.
 
 Exactly one of the system-dependent modules should be configured into an
-installed JPEG library (see install.doc for hints about which one to use).
+installed JPEG library (see install.txt for hints about which one to use).
 On unusual systems you may find it worthwhile to make a special
 system-dependent memory manager.
 
@@ -184,27 +183,34 @@ ADDITIONAL FILES
 Documentation (see README for a guide to the documentation files):
 
 README		Master documentation file.
-*.doc		Other documentation files.
+*.txt		Other documentation files.
 *.1		Documentation in Unix man page format.
 change.log	Version-to-version change highlights.
 example.c	Sample code for calling JPEG library.
 
-Configuration/installation files and programs (see install.doc for more info):
+Configuration/installation files and programs (see install.txt for more info):
 
 configure	Unix shell script to perform automatic configuration.
-ltconfig	Support scripts for configure (from GNU libtool).
-ltmain.sh
+configure.ac	Source file for use with Autoconf to generate configure.
+ltmain.sh	Support scripts for configure (from GNU libtool).
 config.guess
 config.sub
+depcomp
+missing
+ar-lib
+compile
 install-sh	Install shell script for those Unix systems lacking one.
+Makefile.in	Makefile input for configure.
+Makefile.am	Source file for use with Automake to generate Makefile.in.
 ckconfig.c	Program to generate jconfig.h on non-Unix systems.
-jconfig.doc	Template for making jconfig.h by hand.
-makefile.*	Sample makefiles for particular systems.
+jconfig.txt	Template for making jconfig.h by hand.
+mak*.*		Sample makefiles for particular systems.
 jconfig.*	Sample jconfig.h for particular systems.
-ansi2knr.c	De-ANSIfier for pre-ANSI C compilers (courtesy of
-		L. Peter Deutsch and Aladdin Enterprises).
+libjpeg.map	Script to generate shared library with versioned symbols.
+libjpeg.pc.in	libjpeg.pc pkg-config file input for configure.
+aclocal.m4	M4 macro definitions for use with Autoconf.
 
-Test files (see install.doc for test procedure):
+Test files (see install.txt for test procedure):
 
 test*.*		Source and comparison files for confidence test.
 		These are binary image files, NOT text files.

install-sh

@@ -0,0 +1,501 @@
+#!/bin/sh
+# install - install a program, script, or datafile
+
+scriptversion=2016-01-11.22; # UTC
+
+# This originates from X11R5 (mit/util/scripts/install.sh), which was
+# later released in X11R6 (xc/config/util/install.sh) with the
+# following copyright and license.
+#
+# Copyright (C) 1994 X Consortium
+#
+# Permission is hereby granted, free of charge, to any person obtaining a copy
+# of this software and associated documentation files (the "Software"), to
+# deal in the Software without restriction, including without limitation the
+# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
+# sell copies of the Software, and to permit persons to whom the Software is
+# furnished to do so, subject to the following conditions:
+#
+# The above copyright notice and this permission notice shall be included in
+# all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
+# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+#
+# Except as contained in this notice, the name of the X Consortium shall not
+# be used in advertising or otherwise to promote the sale, use or other deal-
+# ings in this Software without prior written authorization from the X Consor-
+# tium.
+#
+#
+# FSF changes to this file are in the public domain.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# 'make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.
+
+tab='	'
+nl='
+'
+IFS=" $tab$nl"
+
+# Set DOITPROG to "echo" to test this script.
+
+doit=${DOITPROG-}
+doit_exec=${doit:-exec}
+
+# Put in absolute file names if you don't have them in your path;
+# or use environment vars.
+
+chgrpprog=${CHGRPPROG-chgrp}
+chmodprog=${CHMODPROG-chmod}
+chownprog=${CHOWNPROG-chown}
+cmpprog=${CMPPROG-cmp}
+cpprog=${CPPROG-cp}
+mkdirprog=${MKDIRPROG-mkdir}
+mvprog=${MVPROG-mv}
+rmprog=${RMPROG-rm}
+stripprog=${STRIPPROG-strip}
+
+posix_mkdir=
+
+# Desired mode of installed file.
+mode=0755
+
+chgrpcmd=
+chmodcmd=$chmodprog
+chowncmd=
+mvcmd=$mvprog
+rmcmd="$rmprog -f"
+stripcmd=
+
+src=
+dst=
+dir_arg=
+dst_arg=
+
+copy_on_change=false
+is_target_a_directory=possibly
+
+usage="\
+Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE
+   or: $0 [OPTION]... SRCFILES... DIRECTORY
+   or: $0 [OPTION]... -t DIRECTORY SRCFILES...
+   or: $0 [OPTION]... -d DIRECTORIES...
+
+In the 1st form, copy SRCFILE to DSTFILE.
+In the 2nd and 3rd, copy all SRCFILES to DIRECTORY.
+In the 4th, create DIRECTORIES.
+
+Options:
+     --help     display this help and exit.
+     --version  display version info and exit.
+
+  -c            (ignored)
+  -C            install only if different (preserve the last data modification time)
+  -d            create directories instead of installing files.
+  -g GROUP      $chgrpprog installed files to GROUP.
+  -m MODE       $chmodprog installed files to MODE.
+  -o USER       $chownprog installed files to USER.
+  -s            $stripprog installed files.
+  -t DIRECTORY  install into DIRECTORY.
+  -T            report an error if DSTFILE is a directory.
+
+Environment variables override the default commands:
+  CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG
+  RMPROG STRIPPROG
+"
+
+while test $# -ne 0; do
+  case $1 in
+    -c) ;;
+
+    -C) copy_on_change=true;;
+
+    -d) dir_arg=true;;
+
+    -g) chgrpcmd="$chgrpprog $2"
+        shift;;
+
+    --help) echo "$usage"; exit $?;;
+
+    -m) mode=$2
+        case $mode in
+          *' '* | *"$tab"* | *"$nl"* | *'*'* | *'?'* | *'['*)
+            echo "$0: invalid mode: $mode" >&2
+            exit 1;;
+        esac
+        shift;;
+
+    -o) chowncmd="$chownprog $2"
+        shift;;
+
+    -s) stripcmd=$stripprog;;
+
+    -t)
+        is_target_a_directory=always
+        dst_arg=$2
+        # Protect names problematic for 'test' and other utilities.
+        case $dst_arg in
+          -* | [=\(\)!]) dst_arg=./$dst_arg;;
+        esac
+        shift;;
+
+    -T) is_target_a_directory=never;;
+
+    --version) echo "$0 $scriptversion"; exit $?;;
+
+    --) shift
+        break;;
+
+    -*) echo "$0: invalid option: $1" >&2
+        exit 1;;
+
+    *)  break;;
+  esac
+  shift
+done
+
+# We allow the use of options -d and -T together, by making -d
+# take the precedence; this is for compatibility with GNU install.
+
+if test -n "$dir_arg"; then
+  if test -n "$dst_arg"; then
+    echo "$0: target directory not allowed when installing a directory." >&2
+    exit 1
+  fi
+fi
+
+if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then
+  # When -d is used, all remaining arguments are directories to create.
+  # When -t is used, the destination is already specified.
+  # Otherwise, the last argument is the destination.  Remove it from $@.
+  for arg
+  do
+    if test -n "$dst_arg"; then
+      # $@ is not empty: it contains at least $arg.
+      set fnord "$@" "$dst_arg"
+      shift # fnord
+    fi
+    shift # arg
+    dst_arg=$arg
+    # Protect names problematic for 'test' and other utilities.
+    case $dst_arg in
+      -* | [=\(\)!]) dst_arg=./$dst_arg;;
+    esac
+  done
+fi
+
+if test $# -eq 0; then
+  if test -z "$dir_arg"; then
+    echo "$0: no input file specified." >&2
+    exit 1
+  fi
+  # It's OK to call 'install-sh -d' without argument.
+  # This can happen when creating conditional directories.
+  exit 0
+fi
+
+if test -z "$dir_arg"; then
+  if test $# -gt 1 || test "$is_target_a_directory" = always; then
+    if test ! -d "$dst_arg"; then
+      echo "$0: $dst_arg: Is not a directory." >&2
+      exit 1
+    fi
+  fi
+fi
+
+if test -z "$dir_arg"; then
+  do_exit='(exit $ret); exit $ret'
+  trap "ret=129; $do_exit" 1
+  trap "ret=130; $do_exit" 2
+  trap "ret=141; $do_exit" 13
+  trap "ret=143; $do_exit" 15
+
+  # Set umask so as not to create temps with too-generous modes.
+  # However, 'strip' requires both read and write access to temps.
+  case $mode in
+    # Optimize common cases.
+    *644) cp_umask=133;;
+    *755) cp_umask=22;;
+
+    *[0-7])
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw='% 200'
+      fi
+      cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;;
+    *)
+      if test -z "$stripcmd"; then
+        u_plus_rw=
+      else
+        u_plus_rw=,u+rw
+      fi
+      cp_umask=$mode$u_plus_rw;;
+  esac
+fi
+
+for src
+do
+  # Protect names problematic for 'test' and other utilities.
+  case $src in
+    -* | [=\(\)!]) src=./$src;;
+  esac
+
+  if test -n "$dir_arg"; then
+    dst=$src
+    dstdir=$dst
+    test -d "$dstdir"
+    dstdir_status=$?
+  else
+
+    # Waiting for this to be detected by the "$cpprog $src $dsttmp" command
+    # might cause directories to be created, which would be especially bad
+    # if $src (and thus $dsttmp) contains '*'.
+    if test ! -f "$src" && test ! -d "$src"; then
+      echo "$0: $src does not exist." >&2
+      exit 1
+    fi
+
+    if test -z "$dst_arg"; then
+      echo "$0: no destination specified." >&2
+      exit 1
+    fi
+    dst=$dst_arg
+
+    # If destination is a directory, append the input filename; won't work
+    # if double slashes aren't ignored.
+    if test -d "$dst"; then
+      if test "$is_target_a_directory" = never; then
+        echo "$0: $dst_arg: Is a directory" >&2
+        exit 1
+      fi
+      dstdir=$dst
+      dst=$dstdir/`basename "$src"`
+      dstdir_status=0
+    else
+      dstdir=`dirname "$dst"`
+      test -d "$dstdir"
+      dstdir_status=$?
+    fi
+  fi
+
+  obsolete_mkdir_used=false
+
+  if test $dstdir_status != 0; then
+    case $posix_mkdir in
+      '')
+        # Create intermediate dirs using mode 755 as modified by the umask.
+        # This is like FreeBSD 'install' as of 1997-10-28.
+        umask=`umask`
+        case $stripcmd.$umask in
+          # Optimize common cases.
+          *[2367][2367]) mkdir_umask=$umask;;
+          .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;;
+
+          *[0-7])
+            mkdir_umask=`expr $umask + 22 \
+              - $umask % 100 % 40 + $umask % 20 \
+              - $umask % 10 % 4 + $umask % 2
+            `;;
+          *) mkdir_umask=$umask,go-w;;
+        esac
+
+        # With -d, create the new directory with the user-specified mode.
+        # Otherwise, rely on $mkdir_umask.
+        if test -n "$dir_arg"; then
+          mkdir_mode=-m$mode
+        else
+          mkdir_mode=
+        fi
+
+        posix_mkdir=false
+        case $umask in
+          *[123567][0-7][0-7])
+            # POSIX mkdir -p sets u+wx bits regardless of umask, which
+            # is incompatible with FreeBSD 'install' when (umask & 300) != 0.
+            ;;
+          *)
+            tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$
+            trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0
+
+            if (umask $mkdir_umask &&
+                exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1
+            then
+              if test -z "$dir_arg" || {
+                   # Check for POSIX incompatibilities with -m.
+                   # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or
+                   # other-writable bit of parent directory when it shouldn't.
+                   # FreeBSD 6.1 mkdir -m -p sets mode of existing directory.
+                   ls_ld_tmpdir=`ls -ld "$tmpdir"`
+                   case $ls_ld_tmpdir in
+                     d????-?r-*) different_mode=700;;
+                     d????-?--*) different_mode=755;;
+                     *) false;;
+                   esac &&
+                   $mkdirprog -m$different_mode -p -- "$tmpdir" && {
+                     ls_ld_tmpdir_1=`ls -ld "$tmpdir"`
+                     test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1"
+                   }
+                 }
+              then posix_mkdir=:
+              fi
+              rmdir "$tmpdir/d" "$tmpdir"
+            else
+              # Remove any dirs left behind by ancient mkdir implementations.
+              rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null
+            fi
+            trap '' 0;;
+        esac;;
+    esac
+
+    if
+      $posix_mkdir && (
+        umask $mkdir_umask &&
+        $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir"
+      )
+    then :
+    else
+
+      # The umask is ridiculous, or mkdir does not conform to POSIX,
+      # or it failed possibly due to a race condition.  Create the
+      # directory the slow way, step by step, checking for races as we go.
+
+      case $dstdir in
+        /*) prefix='/';;
+        [-=\(\)!]*) prefix='./';;
+        *)  prefix='';;
+      esac
+
+      oIFS=$IFS
+      IFS=/
+      set -f
+      set fnord $dstdir
+      shift
+      set +f
+      IFS=$oIFS
+
+      prefixes=
+
+      for d
+      do
+        test X"$d" = X && continue
+
+        prefix=$prefix$d
+        if test -d "$prefix"; then
+          prefixes=
+        else
+          if $posix_mkdir; then
+            (umask=$mkdir_umask &&
+             $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break
+            # Don't fail if two instances are running concurrently.
+            test -d "$prefix" || exit 1
+          else
+            case $prefix in
+              *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;;
+              *) qprefix=$prefix;;
+            esac
+            prefixes="$prefixes '$qprefix'"
+          fi
+        fi
+        prefix=$prefix/
+      done
+
+      if test -n "$prefixes"; then
+        # Don't fail if two instances are running concurrently.
+        (umask $mkdir_umask &&
+         eval "\$doit_exec \$mkdirprog $prefixes") ||
+          test -d "$dstdir" || exit 1
+        obsolete_mkdir_used=true
+      fi
+    fi
+  fi
+
+  if test -n "$dir_arg"; then
+    { test -z "$chowncmd" || $doit $chowncmd "$dst"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } &&
+    { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false ||
+      test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1
+  else
+
+    # Make a couple of temp file names in the proper directory.
+    dsttmp=$dstdir/_inst.$$_
+    rmtmp=$dstdir/_rm.$$_
+
+    # Trap to clean up those temp files at exit.
+    trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0
+
+    # Copy the file name to the temp name.
+    (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") &&
+
+    # and set any options; do chmod last to preserve setuid bits.
+    #
+    # If any of these fail, we abort the whole thing.  If we want to
+    # ignore errors from any of these, just make sure not to ignore
+    # errors from the above "$doit $cpprog $src $dsttmp" command.
+    #
+    { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } &&
+    { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } &&
+    { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } &&
+    { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } &&
+
+    # If -C, don't bother to copy if it wouldn't change the file.
+    if $copy_on_change &&
+       old=`LC_ALL=C ls -dlL "$dst"     2>/dev/null` &&
+       new=`LC_ALL=C ls -dlL "$dsttmp"  2>/dev/null` &&
+       set -f &&
+       set X $old && old=:$2:$4:$5:$6 &&
+       set X $new && new=:$2:$4:$5:$6 &&
+       set +f &&
+       test "$old" = "$new" &&
+       $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1
+    then
+      rm -f "$dsttmp"
+    else
+      # Rename the file to the real destination.
+      $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null ||
+
+      # The rename failed, perhaps because mv can't rename something else
+      # to itself, or perhaps because mv is so ancient that it does not
+      # support -f.
+      {
+        # Now remove or move aside any old file at destination location.
+        # We try this two ways since rm can't unlink itself on some
+        # systems and the destination file might be busy for other
+        # reasons.  In this case, the final cleanup might fail but the new
+        # file should still install successfully.
+        {
+          test ! -f "$dst" ||
+          $doit $rmcmd -f "$dst" 2>/dev/null ||
+          { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null &&
+            { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; }
+          } ||
+          { echo "$0: cannot unlink or rename $dst" >&2
+            (exit 1); exit 1
+          }
+        } &&
+
+        # Now rename the file to the real destination.
+        $doit $mvcmd "$dsttmp" "$dst"
+      }
+    fi || exit 1
+
+    trap '' 0
+  fi
+done
+
+# Local variables:
+# eval: (add-hook 'write-file-hooks 'time-stamp)
+# time-stamp-start: "scriptversion="
+# time-stamp-format: "%:y-%02m-%02d.%02H"
+# time-stamp-time-zone: "UTC0"
+# time-stamp-end: "; # UTC"
+# End:

install.txt

@@ -1,6 +1,6 @@
 INSTALLATION INSTRUCTIONS for the Independent JPEG Group's JPEG software
 
-Copyright (C) 1991-1998, Thomas G. Lane.
+Copyright (C) 1991-2017, Thomas G. Lane, Guido Vollbeding.
 This file is part of the Independent JPEG Group's software.
 For conditions of distribution and use, see the accompanying README file.
 
@@ -94,18 +94,13 @@ Configure was created with GNU Autoconf and it follows the usual conventions
 for GNU configure scripts.  It makes a few assumptions that you may want to
 override.  You can do this by providing optional switches to configure:
 
-* If you want to build libjpeg as a shared library, say
-	./configure --enable-shared
-To get both shared and static libraries, say
-	./configure --enable-shared --enable-static
-Note that these switches invoke GNU libtool to take care of system-dependent
-shared library building methods.  If things don't work this way, please try
-running configure without either switch; that should build a static library
-without using libtool.  If that works, your problem is probably with libtool
-not with the IJG code.  libtool is fairly new and doesn't support all flavors
-of Unix yet.  (You might be able to find a newer version of libtool than the
-one included with libjpeg; see ftp.gnu.org.  Report libtool problems to
-bug-libtool@gnu.org.)
+* Configure will build both static and shared libraries, if possible.
+If you want to build libjpeg only as a static library, say
+	./configure --disable-shared
+If you want to build libjpeg only as a shared library, say
+	./configure --disable-static
+Configure uses GNU libtool to take care of system-dependent shared library
+building methods.
 
 * Configure will use gcc (GNU C compiler) if it's available, otherwise cc.
 To force a particular compiler to be selected, use the CC option, for example
@@ -115,10 +110,10 @@ For example, on HP-UX you probably want to say
 	./configure CC='cc -Aa'
 to get HP's compiler to run in ANSI mode.
 
-* The default CFLAGS setting is "-O" for non-gcc compilers, "-O2" for gcc.
+* The default CFLAGS setting is "-g" for non-gcc compilers, "-g -O2" for gcc.
 You can override this by saying, for example,
-	./configure CFLAGS='-g'
-if you want to compile with debugging support.
+	./configure CFLAGS='-O2'
+if you want to compile without debugging support.
 
 * Configure will set up the makefile so that "make install" will install files
 into /usr/local/bin, /usr/local/man, etc.  You can specify an installation
@@ -152,8 +147,12 @@ makefile.bcc	jconfig.bcc	MS-DOS or OS/2, Borland C
 makefile.dj	jconfig.dj	MS-DOS, DJGPP (Delorie's port of GNU C)
 makefile.mc6	jconfig.mc6	MS-DOS, Microsoft C (16-bit only)
 makefile.wat	jconfig.wat	MS-DOS, OS/2, or Windows NT, Watcom C
-makefile.vc	jconfig.vc	Windows NT/95, MS Visual C++
-make*.ds	jconfig.vc	Windows NT/95, MS Developer Studio
+makefile.vc	jconfig.vc	Windows, MS Visual C++
+makefile.vs	jconfig.vc	Windows, MS Visual C++ 6 Developer Studio
+make*.vc6
+makefile.vs	jconfig.vc	Windows, Visual Studio 2017 (v15)
+make*.v15
+makefile.b32	jconfig.vc	Windows, Borland C++ 32-bit (bcc32)
 makefile.mms	jconfig.vms	Digital VMS, with MMS software
 makefile.vms	jconfig.vms	Digital VMS, without MMS software
 
@@ -166,8 +165,8 @@ Configuring the software by hand
 --------------------------------
 
 First, generate a jconfig.h file.  If you are moderately familiar with C,
-the comments in jconfig.doc should be enough information to do this; just
-copy jconfig.doc to jconfig.h and edit it appropriately.  Otherwise, you may
+the comments in jconfig.txt should be enough information to do this; just
+copy jconfig.txt to jconfig.h and edit it appropriately.  Otherwise, you may
 prefer to use the ckconfig.c program.  You will need to compile and execute
 ckconfig.c by hand --- we hope you know at least enough to do that.
 ckconfig.c may not compile the first try (in fact, the whole idea is for it
@@ -325,9 +324,9 @@ several forms:
 	testimg.jpg	The output of cjpeg testimg.ppm
 	testprog.jpg	Progressive-mode equivalent of testorig.jpg.
 	testimgp.jpg	The output of cjpeg -progressive -optimize testimg.ppm
-(The first- and second-generation .jpg files aren't identical since JPEG is
-lossy.)  If you can generate duplicates of the testimg* files then you
-probably have working programs.
+(The first- and second-generation .jpg files aren't identical since the
+default compression parameters are lossy.)  If you can generate duplicates
+of the testimg* files then you probably have working programs.
 
 With most of the makefiles, "make test" will perform the necessary
 comparisons.
@@ -422,54 +421,58 @@ support as follows:
 	    the directory containing the URT "librle.a" file (typically the
 	    "lib" subdirectory of the URT distribution).
 
-Support for 12-bit-deep pixel data:
+Support for 9-bit to 12-bit deep pixel data:
 
-The JPEG standard allows either 8-bit or 12-bit data precision.  (For color,
-this means 8 or 12 bits per channel, of course.)  If you need to work with
-deeper than 8-bit data, you can compile the IJG code for 12-bit operation.
+The IJG code currently allows 8, 9, 10, 11, or 12 bits sample data precision.
+(For color, this means 8 to 12 bits per channel, of course.)  If you need to
+work with deeper than 8-bit data, you can compile the IJG code for 9-bit to
+12-bit operation.
 To do so:
-  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 12 rather than 8.
+  1. In jmorecfg.h, define BITS_IN_JSAMPLE as 9, 10, 11, or 12 rather than 8.
   2. In jconfig.h, undefine BMP_SUPPORTED, RLE_SUPPORTED, and TARGA_SUPPORTED,
-     because the code for those formats doesn't handle 12-bit data and won't
-     even compile.  (The PPM code does work, as explained below.  The GIF
-     code works too; it scales 8-bit GIF data to and from 12-bit depth
-     automatically.)
+     because the code for those formats doesn't handle deeper than 8-bit data
+     and won't even compile.  (The PPM code does work, as explained below.
+     The GIF code works too; it scales 8-bit GIF data to and from 12-bit
+     depth automatically.)
   3. Compile.  Don't expect "make test" to pass, since the supplied test
      files are for 8-bit data.
 
-Currently, 12-bit support does not work on 16-bit-int machines.
+Currently, 9-bit to 12-bit support does not work on 16-bit-int machines.
 
-Note that a 12-bit version will not read 8-bit JPEG files, nor vice versa;
-so you'll want to keep around a regular 8-bit compilation as well.
-(Run-time selection of data depth, to allow a single copy that does both,
-is possible but would probably slow things down considerably; it's very low
-on our to-do list.)
+Run-time selection and conversion of data precision are currently not
+supported and may be added later.
+Exception:  The transcoding part (jpegtran) supports all settings in a
+single instance, since it operates on the level of DCT coefficients and
+not sample values.
 
-The PPM reader (rdppm.c) can read 12-bit data from either text-format or
-binary-format PPM and PGM files.  Binary-format PPM/PGM files which have a
-maxval greater than 255 are assumed to use 2 bytes per sample, LSB first
-(little-endian order).  As of early 1995, 2-byte binary format is not
+The PPM reader (rdppm.c) can read deeper than 8-bit data from either
+text-format or binary-format PPM and PGM files.  Binary-format PPM/PGM files
+which have a maxval greater than 255 are assumed to use 2 bytes per sample,
+MSB first (big-endian order).  As of early 1995, 2-byte binary format is not
 officially supported by the PBMPLUS library, but it is expected that a
 future release of PBMPLUS will support it.  Note that the PPM reader will
 read files of any maxval regardless of the BITS_IN_JSAMPLE setting; incoming
-data is automatically rescaled to either maxval=255 or maxval=4095 as
-appropriate for the cjpeg bit depth.
+data is automatically rescaled to maxval=MAXJSAMPLE as appropriate for the
+cjpeg bit depth.
 
 The PPM writer (wrppm.c) will normally write 2-byte binary PPM or PGM
-format, maxval 4095, when compiled with BITS_IN_JSAMPLE=12.  Since this
+format, maxval=MAXJSAMPLE, when compiled with BITS_IN_JSAMPLE>8.  Since this
 format is not yet widely supported, you can disable it by compiling wrppm.c
 with PPM_NORAWWORD defined; then the data is scaled down to 8 bits to make a
 standard 1-byte/sample PPM or PGM file.  (Yes, this means still another copy
 of djpeg to keep around.  But hopefully you won't need it for very long.
 Poskanzer's supposed to get that new PBMPLUS release out Real Soon Now.)
 
-Of course, if you are working with 12-bit data, you probably have it stored
-in some other, nonstandard format.  In that case you'll probably want to
-write your own I/O modules to read and write your format.
+Of course, if you are working with 9-bit to 12-bit data, you probably have
+it stored in some other, nonstandard format.  In that case you'll probably
+want to write your own I/O modules to read and write your format.
 
-Note that a 12-bit version of cjpeg always runs in "-optimize" mode, in
-order to generate valid Huffman tables.  This is necessary because our
-default Huffman tables only cover 8-bit data.
+Note:
+The standard Huffman tables are only valid for 8-bit data precision.  If
+you selected more than 8-bit data precision, cjpeg uses arithmetic coding
+by default.  The Huffman encoder normally uses entropy optimization to
+compute usable tables for higher precision.  Otherwise, you'll have to
+supply different default Huffman tables.
 
 Removing code:
 
@@ -521,7 +524,7 @@ that float DCT results may vary slightly across machines.)  To do that, add
 "#define JDCT_DEFAULT JDCT_FLOAT" to jconfig.h.  Even if you don't change
 the default, you should redefine JDCT_FASTEST, which is the method selected
 by djpeg's -fast switch.  Don't forget to update the documentation files
-(usage.doc and/or cjpeg.1, djpeg.1) to agree with what you've done.
+(usage.txt and/or cjpeg.1, djpeg.1) to agree with what you've done.
 
 If access to "short" arrays is slow on your machine, it may be a win to
 define type JCOEF as int rather than short.  This will cost a good deal of
@@ -538,7 +541,7 @@ In general, it's worth trying the maximum optimization level of your compiler,
 and experimenting with any optional optimizations such as loop unrolling.
 (Unfortunately, far too many compilers have optimizer bugs ... be prepared to
 back off if the code fails self-test.)  If you do any experimentation along
-these lines, please report the optimal settings to jpeg-info@uunet.uu.net so
+these lines, please report the optimal settings to jpeg-info@jpegclub.org so
 we can mention them in future releases.  Be sure to specify your machine and
 compiler version.
 
@@ -547,7 +550,7 @@ HINTS FOR SPECIFIC SYSTEMS
 ==========================
 
 We welcome reports on changes needed for systems not mentioned here.  Submit
-'em to jpeg-info@uunet.uu.net.  Also, if configure or ckconfig.c is wrong
+'em to jpeg-info@jpegclub.org.  Also, if configure or ckconfig.c is wrong
 about how to configure the JPEG software for your system, please let us know.
 
 
@@ -568,7 +571,7 @@ Also add a new line '.c.o:; $(cc) $< $(cflags) -c -o $@'.  Remove the
 lines '$(RM) libjpeg.o' and '$(AR2) libjpeg.o' and the 'jconfig.h'
 dependency section.
 
-Copy jconfig.doc to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
+Copy jconfig.txt to jconfig.h.  Edit jconfig.h to define TWO_FILE_COMMANDLINE
 and CHAR_IS_UNSIGNED.
 
 Run the makefile using !AMU not !Make.  If you want to use the 'clean' and
@@ -587,7 +590,7 @@ manager, with temporary files being created on the device named by
 
 
 Atari ST/STE/TT:
- 
+
 Copy the project files makcjpeg.st, makdjpeg.st, maktjpeg.st, and makljpeg.st
 to cjpeg.prj, djpeg.prj, jpegtran.prj, and libjpeg.prj respectively.  The
 project files should work as-is with Pure C.  For Turbo C, change library
@@ -610,7 +613,8 @@ or jpegtran.ttp.  You'll have to perform the self-test by hand.
 
 We haven't bothered to include project files for rdjpgcom and wrjpgcom.
 Those source files should just be compiled by themselves; they don't
-depend on the JPEG library.
+depend on the JPEG library.  You can use the default.prj project file
+of the Pure C distribution to make the programs.
 
 There is a bug in some older versions of the Turbo C library which causes the
 space used by temporary files created with "tmpfile()" not to be freed after
@@ -851,17 +855,23 @@ with /Oo-.
 Microsoft Windows (all versions), generic comments:
 
 Some Windows system include files define typedef boolean as "unsigned char".
-The IJG code also defines typedef boolean, but we make it "int" by default.
+The IJG code also defines typedef boolean, but we make it an "enum" by default.
 This doesn't affect the IJG programs because we don't import those Windows
 include files.  But if you use the JPEG library in your own program, and some
 of your program's files import one definition of boolean while some import the
 other, you can get all sorts of mysterious problems.  A good preventive step
 is to make the IJG library use "unsigned char" for boolean.  To do that,
 add something like this to your jconfig.h file:
-	/* Define "boolean" as unsigned char, not int, per Windows custom */
+	/* Define "boolean" as unsigned char, not enum, per Windows custom */
 	#ifndef __RPCNDR_H__	/* don't conflict if rpcndr.h already read */
 	typedef unsigned char boolean;
 	#endif
+	#ifndef FALSE		/* in case these macros already exist */
+	#define FALSE	0	/* values of boolean */
+	#endif
+	#ifndef TRUE
+	#define TRUE	1
+	#endif
 	#define HAVE_BOOLEAN	/* prevent jmorecfg.h from redefining it */
 (This is already in jconfig.vc, by the way.)
 
@@ -872,6 +882,7 @@ Since jmorecfg.h tries to define FAR as empty, you may get a compiler
 warning if you include both jpeglib.h and windef.h (which windows.h
 includes).  To suppress the warning, you can put "#ifndef FAR"/"#endif"
 around the line "#define FAR" in jmorecfg.h.
+(Something like this is already in jmorecfg.h, by the way.)
 
 When using the library in a Windows application, you will almost certainly
 want to modify or replace the error handler module jerror.c, since our
@@ -890,7 +901,7 @@ jconfig.h to enable it.)
 
 The proper solution for problem 2 is to return control to your calling
 application after a library error.  This can be done with the setjmp/longjmp
-technique discussed in libjpeg.doc and illustrated in example.c.  (NOTE:
+technique discussed in libjpeg.txt and illustrated in example.c.  (NOTE:
 some older Windows C compilers provide versions of setjmp/longjmp that
 don't actually work under Windows.  You may need to use the Windows system
 functions Catch and Throw instead.)
@@ -1000,32 +1011,67 @@ model.  makefile.vc is intended for command-line use.  (If you are using
 the Developer Studio environment, you may prefer the DevStudio project
 files; see below.)
 
-Some users feel that it's easier to call the library from C++ code if you
-force VC++ to treat the library as C++ code, which you can do by renaming
-all the *.c files to *.cpp (and adjusting the makefile to match).  This
-avoids the need to put extern "C" { ... } around #include "jpeglib.h" in
-your C++ application.
+IJG JPEG 7 adds extern "C" to jpeglib.h.  This avoids the need to put
+extern "C" { ... } around #include "jpeglib.h" in your C++ application.
+You can also force VC++ to treat the library as C++ code by renaming
+all the *.c files to *.cpp (and adjusting the makefile to match).
+In this case you also need to define the symbol DONT_USE_EXTERN_C in
+the configuration to prevent jpeglib.h from using extern "C".
 
 
-Microsoft Windows, Microsoft Developer Studio:
+Microsoft Windows, Microsoft Visual C++ 6 Developer Studio:
 
-We include makefiles that should work as project files in DevStudio 4.2 or
-later.  There is a library makefile that builds the IJG library as a static
-Win32 library, and an application makefile that builds the sample applications
-as Win32 console applications.  (Even if you only want the library, we
-recommend building the applications so that you can run the self-test.)
+We include makefiles that should work as project files in Developer Studio
+6.0 or later.  There is a library makefile that builds the IJG library as
+a static Win32 library, and application makefiles that build the sample
+applications as Win32 console applications.  (Even if you only want the
+library, we recommend building the applications so that you can run the
+self-test.)
 
 To use:
-1. Copy jconfig.vc to jconfig.h, makelib.ds to jpeg.mak, and
-   makeapps.ds to apps.mak.  (Note that the renaming is critical!)
-2. Click on the .mak files to construct project workspaces.
-   (If you are using DevStudio more recent than 4.2, you'll probably
-   get a message saying that the makefiles are being updated.)
-3. Build the library project, then the applications project.
-4. Move the application .exe files from `app`\Release to an
+1. Open the command prompt, change to the main directory and execute the
+   command line
+	NMAKE /f makefile.vs  setup-vc6
+   This will move jconfig.vc to jconfig.h and makefiles to project files.
+   (Note that the renaming is critical!)
+2. Open the workspace file jpeg.dsw, build the library project.
+   (If you are using Developer Studio more recent than 6.0, you'll
+   probably get a message saying that the project files are being updated.)
+3. Open the workspace file apps.dsw, build the application projects.
+4. To perform the self-test, execute the command line
+	NMAKE /f makefile.vs  test-build
+5. Move the application .exe files from `app`\Release to an
+   appropriate location on your path.
+
+
+Microsoft Windows, Visual Studio 2017 (v15):
+
+We include makefiles that should work as project files in Visual Studio
+2017 (v15) or later.  There is a library makefile that builds the IJG
+library as a static Win32 library, and application makefiles that build
+the sample applications as Win32 console applications.  (Even if you only
+want the library, we recommend building the applications so that you can
+run the self-test.)
+
+To use:
+1. Open the Developer Command Prompt, change to the main directory and
+   execute the command line
+	NMAKE /f makefile.vs  setup-v15
+   This will move jconfig.vc to jconfig.h and makefiles to project files.
+   (Note that the renaming is critical!)
+2. Open the solution file jpeg.sln, build the library project.
+     a) If you are using Visual Studio more recent than
+	2017 (v15), you'll probably get a message saying
+	that the project files are being updated.
+     b) If necessary, open the project properties and
+	adapt the Windows Target Platform Version in
+	the Configuration Properties, General section;
+	we support the latest version at the time of release.
+3. Open the solution file apps.sln, build the application projects.
+4. To perform the self-test, execute the command line
+	NMAKE /f makefile.vs  test-build
+5. Move the application .exe files from `app`\Release to an
    appropriate location on your path.
-5. To perform the self-test, execute the command line
-	NMAKE /f makefile.vc  test
 
 
 OS/2, Borland C++:

jaricom.c

@@ -0,0 +1,153 @@
+/*
+ * jaricom.c
+ *
+ * Developed 1997-2011 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains probability estimation tables for common use in
+ * arithmetic entropy encoding and decoding routines.
+ *
+ * This data represents Table D.3 in the JPEG spec (D.2 in the draft),
+ * ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81, and Table 24
+ * in the JBIG spec, ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+/* The following #define specifies the packing of the four components
+ * into the compact INT32 representation.
+ * Note that this formula must match the actual arithmetic encoder
+ * and decoder implementation.  The implementation has to be changed
+ * if this formula is changed.
+ * The current organization is leaned on Markus Kuhn's JBIG
+ * implementation (jbig_tab.c).
+ */
+
+#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b)
+
+const INT32 jpeg_aritab[113+1] = {
+/*
+ * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS
+ */
+  V(   0, 0x5a1d,   1,   1, 1 ),
+  V(   1, 0x2586,  14,   2, 0 ),
+  V(   2, 0x1114,  16,   3, 0 ),
+  V(   3, 0x080b,  18,   4, 0 ),
+  V(   4, 0x03d8,  20,   5, 0 ),
+  V(   5, 0x01da,  23,   6, 0 ),
+  V(   6, 0x00e5,  25,   7, 0 ),
+  V(   7, 0x006f,  28,   8, 0 ),
+  V(   8, 0x0036,  30,   9, 0 ),
+  V(   9, 0x001a,  33,  10, 0 ),
+  V(  10, 0x000d,  35,  11, 0 ),
+  V(  11, 0x0006,   9,  12, 0 ),
+  V(  12, 0x0003,  10,  13, 0 ),
+  V(  13, 0x0001,  12,  13, 0 ),
+  V(  14, 0x5a7f,  15,  15, 1 ),
+  V(  15, 0x3f25,  36,  16, 0 ),
+  V(  16, 0x2cf2,  38,  17, 0 ),
+  V(  17, 0x207c,  39,  18, 0 ),
+  V(  18, 0x17b9,  40,  19, 0 ),
+  V(  19, 0x1182,  42,  20, 0 ),
+  V(  20, 0x0cef,  43,  21, 0 ),
+  V(  21, 0x09a1,  45,  22, 0 ),
+  V(  22, 0x072f,  46,  23, 0 ),
+  V(  23, 0x055c,  48,  24, 0 ),
+  V(  24, 0x0406,  49,  25, 0 ),
+  V(  25, 0x0303,  51,  26, 0 ),
+  V(  26, 0x0240,  52,  27, 0 ),
+  V(  27, 0x01b1,  54,  28, 0 ),
+  V(  28, 0x0144,  56,  29, 0 ),
+  V(  29, 0x00f5,  57,  30, 0 ),
+  V(  30, 0x00b7,  59,  31, 0 ),
+  V(  31, 0x008a,  60,  32, 0 ),
+  V(  32, 0x0068,  62,  33, 0 ),
+  V(  33, 0x004e,  63,  34, 0 ),
+  V(  34, 0x003b,  32,  35, 0 ),
+  V(  35, 0x002c,  33,   9, 0 ),
+  V(  36, 0x5ae1,  37,  37, 1 ),
+  V(  37, 0x484c,  64,  38, 0 ),
+  V(  38, 0x3a0d,  65,  39, 0 ),
+  V(  39, 0x2ef1,  67,  40, 0 ),
+  V(  40, 0x261f,  68,  41, 0 ),
+  V(  41, 0x1f33,  69,  42, 0 ),
+  V(  42, 0x19a8,  70,  43, 0 ),
+  V(  43, 0x1518,  72,  44, 0 ),
+  V(  44, 0x1177,  73,  45, 0 ),
+  V(  45, 0x0e74,  74,  46, 0 ),
+  V(  46, 0x0bfb,  75,  47, 0 ),
+  V(  47, 0x09f8,  77,  48, 0 ),
+  V(  48, 0x0861,  78,  49, 0 ),
+  V(  49, 0x0706,  79,  50, 0 ),
+  V(  50, 0x05cd,  48,  51, 0 ),
+  V(  51, 0x04de,  50,  52, 0 ),
+  V(  52, 0x040f,  50,  53, 0 ),
+  V(  53, 0x0363,  51,  54, 0 ),
+  V(  54, 0x02d4,  52,  55, 0 ),
+  V(  55, 0x025c,  53,  56, 0 ),
+  V(  56, 0x01f8,  54,  57, 0 ),
+  V(  57, 0x01a4,  55,  58, 0 ),
+  V(  58, 0x0160,  56,  59, 0 ),
+  V(  59, 0x0125,  57,  60, 0 ),
+  V(  60, 0x00f6,  58,  61, 0 ),
+  V(  61, 0x00cb,  59,  62, 0 ),
+  V(  62, 0x00ab,  61,  63, 0 ),
+  V(  63, 0x008f,  61,  32, 0 ),
+  V(  64, 0x5b12,  65,  65, 1 ),
+  V(  65, 0x4d04,  80,  66, 0 ),
+  V(  66, 0x412c,  81,  67, 0 ),
+  V(  67, 0x37d8,  82,  68, 0 ),
+  V(  68, 0x2fe8,  83,  69, 0 ),
+  V(  69, 0x293c,  84,  70, 0 ),
+  V(  70, 0x2379,  86,  71, 0 ),
+  V(  71, 0x1edf,  87,  72, 0 ),
+  V(  72, 0x1aa9,  87,  73, 0 ),
+  V(  73, 0x174e,  72,  74, 0 ),
+  V(  74, 0x1424,  72,  75, 0 ),
+  V(  75, 0x119c,  74,  76, 0 ),
+  V(  76, 0x0f6b,  74,  77, 0 ),
+  V(  77, 0x0d51,  75,  78, 0 ),
+  V(  78, 0x0bb6,  77,  79, 0 ),
+  V(  79, 0x0a40,  77,  48, 0 ),
+  V(  80, 0x5832,  80,  81, 1 ),
+  V(  81, 0x4d1c,  88,  82, 0 ),
+  V(  82, 0x438e,  89,  83, 0 ),
+  V(  83, 0x3bdd,  90,  84, 0 ),
+  V(  84, 0x34ee,  91,  85, 0 ),
+  V(  85, 0x2eae,  92,  86, 0 ),
+  V(  86, 0x299a,  93,  87, 0 ),
+  V(  87, 0x2516,  86,  71, 0 ),
+  V(  88, 0x5570,  88,  89, 1 ),
+  V(  89, 0x4ca9,  95,  90, 0 ),
+  V(  90, 0x44d9,  96,  91, 0 ),
+  V(  91, 0x3e22,  97,  92, 0 ),
+  V(  92, 0x3824,  99,  93, 0 ),
+  V(  93, 0x32b4,  99,  94, 0 ),
+  V(  94, 0x2e17,  93,  86, 0 ),
+  V(  95, 0x56a8,  95,  96, 1 ),
+  V(  96, 0x4f46, 101,  97, 0 ),
+  V(  97, 0x47e5, 102,  98, 0 ),
+  V(  98, 0x41cf, 103,  99, 0 ),
+  V(  99, 0x3c3d, 104, 100, 0 ),
+  V( 100, 0x375e,  99,  93, 0 ),
+  V( 101, 0x5231, 105, 102, 0 ),
+  V( 102, 0x4c0f, 106, 103, 0 ),
+  V( 103, 0x4639, 107, 104, 0 ),
+  V( 104, 0x415e, 103,  99, 0 ),
+  V( 105, 0x5627, 105, 106, 1 ),
+  V( 106, 0x50e7, 108, 107, 0 ),
+  V( 107, 0x4b85, 109, 103, 0 ),
+  V( 108, 0x5597, 110, 109, 0 ),
+  V( 109, 0x504f, 111, 107, 0 ),
+  V( 110, 0x5a10, 110, 111, 1 ),
+  V( 111, 0x5522, 112, 109, 0 ),
+  V( 112, 0x59eb, 112, 111, 1 ),
+/*
+ * This last entry is used for fixed probability estimate of 0.5
+ * as suggested in Section 10.3 Table 5 of ITU-T Rec. T.851.
+ */
+  V( 113, 0x5a1d, 113, 113, 0 )
+};

jcapimin.c

@@ -2,6 +2,7 @@
  * jcapimin.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2003-2010 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -63,14 +64,21 @@ jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize)
 
   cinfo->comp_info = NULL;
 
-  for (i = 0; i < NUM_QUANT_TBLS; i++)
+  for (i = 0; i < NUM_QUANT_TBLS; i++) {
     cinfo->quant_tbl_ptrs[i] = NULL;
+    cinfo->q_scale_factor[i] = 100;
+  }
 
   for (i = 0; i < NUM_HUFF_TBLS; i++) {
     cinfo->dc_huff_tbl_ptrs[i] = NULL;
     cinfo->ac_huff_tbl_ptrs[i] = NULL;
   }
 
+  /* Must do it here for emit_dqt in case jpeg_write_tables is used */
+  cinfo->block_size = DCTSIZE;
+  cinfo->natural_order = jpeg_natural_order;
+  cinfo->lim_Se = DCTSIZE2-1;
+
   cinfo->script_space = NULL;
 
   cinfo->input_gamma = 1.0;	/* in case application forgets */

jcapistd.c

@@ -2,6 +2,7 @@
  * jcapistd.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -145,7 +146,7 @@ jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data,
     (*cinfo->master->pass_startup) (cinfo);
 
   /* Verify that at least one iMCU row has been passed. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE;
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size;
   if (num_lines < lines_per_iMCU_row)
     ERREXIT(cinfo, JERR_BUFFER_SIZE);
 

jcarith.c

@@ -0,0 +1,944 @@
+/*
+ * jcarith.c
+ *
+ * Developed 1997-2013 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy encoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy encoder object for arithmetic encoding. */
+
+typedef struct {
+  struct jpeg_entropy_encoder pub; /* public fields */
+
+  INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */
+  INT32 a;               /* A register, normalized size of coding interval */
+  INT32 sc;        /* counter for stacked 0xFF values which might overflow */
+  INT32 zc;          /* counter for pending 0x00 output values which might *
+                          * be discarded at the end ("Pacman" termination) */
+  int ct;  /* bit shift counter, determines when next byte will be written */
+  int buffer;                /* buffer for most recent output byte != 0xFF */
+
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+  int next_restart_num;		/* next restart number to write (0-7) */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_encoder;
+
+typedef arith_entropy_encoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+/* NOTE: Uncomment the following #define if you want to use the
+ * given formula for calculating the AC conditioning parameter Kx
+ * for spectral selection progressive coding in section G.1.3.2
+ * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4).
+ * Although the spec and P&M authors claim that this "has proven
+ * to give good results for 8 bit precision samples", I'm not
+ * convinced yet that this is really beneficial.
+ * Early tests gave only very marginal compression enhancements
+ * (a few - around 5 or so - bytes even for very large files),
+ * which would turn out rather negative if we'd suppress the
+ * DAC (Define Arithmetic Conditioning) marker segments for
+ * the default parameters in the future.
+ * Note that currently the marker writing module emits 12-byte
+ * DAC segments for a full-component scan in a color image.
+ * This is not worth worrying about IMHO. However, since the
+ * spec defines the default values to be used if the tables
+ * are omitted (unlike Huffman tables, which are required
+ * anyway), one might optimize this behaviour in the future,
+ * and then it would be disadvantageous to use custom tables if
+ * they don't provide sufficient gain to exceed the DAC size.
+ *
+ * On the other hand, I'd consider it as a reasonable result
+ * that the conditioning has no significant influence on the
+ * compression performance. This means that the basic
+ * statistical model is already rather stable.
+ *
+ * Thus, at the moment, we use the default conditioning values
+ * anyway, and do not use the custom formula.
+ *
+#define CALCULATE_SPECTRAL_CONDITIONING
+ */
+
+/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
+ * We assume that int right shift is unsigned if INT32 right shift is,
+ * which should be safe.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	int ishift_temp;
+#define IRIGHT_SHIFT(x,shft)  \
+	((ishift_temp = (x)) < 0 ? \
+	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
+	 (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+
+LOCAL(void)
+emit_byte (int val, j_compress_ptr cinfo)
+/* Write next output byte; we do not support suspension in this module. */
+{
+  struct jpeg_destination_mgr * dest = cinfo->dest;
+
+  *dest->next_output_byte++ = (JOCTET) val;
+  if (--dest->free_in_buffer == 0)
+    if (! (*dest->empty_output_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+}
+
+
+/*
+ * Finish up at the end of an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  INT32 temp;
+
+  /* Section D.1.8: Termination of encoding */
+
+  /* Find the e->c in the coding interval with the largest
+   * number of trailing zero bits */
+  if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c)
+    e->c = temp + 0x8000L;
+  else
+    e->c = temp;
+  /* Send remaining bytes to output */
+  e->c <<= e->ct;
+  if (e->c & 0xF8000000L) {
+    /* One final overflow has to be handled */
+    if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer + 1, cinfo);
+      if (e->buffer + 1 == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+    e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+    e->sc = 0;
+  } else {
+    if (e->buffer == 0)
+      ++e->zc;
+    else if (e->buffer >= 0) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      emit_byte(e->buffer, cinfo);
+    }
+    if (e->sc) {
+      if (e->zc)
+	do emit_byte(0x00, cinfo);
+	while (--e->zc);
+      do {
+	emit_byte(0xFF, cinfo);
+	emit_byte(0x00, cinfo);
+      } while (--e->sc);
+    }
+  }
+  /* Output final bytes only if they are not 0x00 */
+  if (e->c & 0x7FFF800L) {
+    if (e->zc)  /* output final pending zero bytes */
+      do emit_byte(0x00, cinfo);
+      while (--e->zc);
+    emit_byte((e->c >> 19) & 0xFF, cinfo);
+    if (((e->c >> 19) & 0xFF) == 0xFF)
+      emit_byte(0x00, cinfo);
+    if (e->c & 0x7F800L) {
+      emit_byte((e->c >> 11) & 0xFF, cinfo);
+      if (((e->c >> 11) & 0xFF) == 0xFF)
+	emit_byte(0x00, cinfo);
+    }
+  }
+}
+
+
+/*
+ * The core arithmetic encoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Parameter 'val' to be encoded may be 0 or 1 (binary decision).
+ *
+ * Note: I've added full "Pacman" termination support to the
+ * byte output routines, which is equivalent to the optional
+ * Discard_final_zeros procedure (Figure D.15) in the spec.
+ * Thus, we always produce the shortest possible output
+ * stream compliant to the spec (no trailing zero bytes,
+ * except for FF stuffing).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(void)
+arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) 
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv;
+
+  /* Fetch values from our compact representation of Table D.3(D.2):
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Encode & estimation procedures per sections D.1.4 & D.1.5 */
+  e->a -= qe;
+  if (val != (sv >> 7)) {
+    /* Encode the less probable symbol */
+    if (e->a >= qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency, otherwise code the LPS
+       * as usual: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+  } else {
+    /* Encode the more probable symbol */
+    if (e->a >= 0x8000L)
+      return;  /* A >= 0x8000 -> ready, no renormalization required */
+    if (e->a < qe) {
+      /* If the interval size (qe) for the less probable symbol (LPS)
+       * is larger than the interval size for the MPS, then exchange
+       * the two symbols for coding efficiency: */
+      e->c += e->a;
+      e->a = qe;
+    }
+    *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+  }
+
+  /* Renormalization & data output per section D.1.6 */
+  do {
+    e->a <<= 1;
+    e->c <<= 1;
+    if (--e->ct == 0) {
+      /* Another byte is ready for output */
+      temp = e->c >> 19;
+      if (temp > 0xFF) {
+	/* Handle overflow over all stacked 0xFF bytes */
+	if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer + 1, cinfo);
+	  if (e->buffer + 1 == 0xFF)
+	    emit_byte(0x00, cinfo);
+	}
+	e->zc += e->sc;  /* carry-over converts stacked 0xFF bytes to 0x00 */
+	e->sc = 0;
+	/* Note: The 3 spacer bits in the C register guarantee
+	 * that the new buffer byte can't be 0xFF here
+	 * (see page 160 in the P&M JPEG book). */
+	e->buffer = temp & 0xFF;  /* new output byte, might overflow later */
+      } else if (temp == 0xFF) {
+	++e->sc;  /* stack 0xFF byte (which might overflow later) */
+      } else {
+	/* Output all stacked 0xFF bytes, they will not overflow any more */
+	if (e->buffer == 0)
+	  ++e->zc;
+	else if (e->buffer >= 0) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  emit_byte(e->buffer, cinfo);
+	}
+	if (e->sc) {
+	  if (e->zc)
+	    do emit_byte(0x00, cinfo);
+	    while (--e->zc);
+	  do {
+	    emit_byte(0xFF, cinfo);
+	    emit_byte(0x00, cinfo);
+	  } while (--e->sc);
+	}
+	e->buffer = temp & 0xFF;  /* new output byte (can still overflow) */
+      }
+      e->c &= 0x7FFFFL;
+      e->ct += 8;
+    }
+  } while (e->a < 0x8000L);
+}
+
+
+/*
+ * Emit a restart marker & resynchronize predictions.
+ */
+
+LOCAL(void)
+emit_restart (j_compress_ptr cinfo, int restart_num)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  finish_pass(cinfo);
+
+  emit_byte(0xFF, cinfo);
+  emit_byte(JPEG_RST0 + restart_num, cinfo);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+}
+
+
+/*
+ * MCU encoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int blkn, ci, tbl;
+  int v, v2, m;
+  ISHIFT_TEMPS
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Compute the DC value after the required point transform by Al.
+     * This is simply an arithmetic right shift.
+     */
+    m = IRIGHT_SHIFT((int) (MCU_data[blkn][0][0]), cinfo->Al);
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = m - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = m;
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke;
+  int v, v2, m;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  ke = cinfo->Se;
+  do {
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+  } while (--ke);
+
+  /* Figure F.5: Encode_AC_Coefficients */
+  for (k = cinfo->Ss - 1; k < ke;) {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    arith_encode(cinfo, st, 0);		/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[natural_order[++k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 0);
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  arith_encode(cinfo, st + 1, 1);
+	  arith_encode(cinfo, entropy->fixed_bin, 1);
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0);
+      st += 3;
+    }
+    st += 2;
+    /* Figure F.8: Encoding the magnitude category of v */
+    m = 0;
+    if (v -= 1) {
+      arith_encode(cinfo, st, 1);
+      m = 1;
+      v2 = v;
+      if (v2 >>= 1) {
+	arith_encode(cinfo, st, 1);
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+    }
+    arith_encode(cinfo, st, 0);
+    /* Figure F.9: Encoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      arith_encode(cinfo, st, (m & v) ? 1 : 0);
+  }
+  /* Encode EOB decision only if k < cinfo->Se */
+  if (k < cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component,
+ * although the spec is not very clear on the point.
+ */
+
+METHODDEF(boolean)
+encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int Al, blkn;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  Al = cinfo->Al;
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* We simply emit the Al'th bit of the DC coefficient value. */
+    arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU encoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke, kex;
+  int v;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data block */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Section G.1.3.3: Encoding of AC coefficients */
+
+  /* Establish EOB (end-of-block) index */
+  ke = cinfo->Se;
+  do {
+    /* We must apply the point transform by Al.  For AC coefficients this
+     * is an integer division with rounding towards 0.  To do this portably
+     * in C, we shift after obtaining the absolute value.
+     */
+    if ((v = (*block)[natural_order[ke]]) >= 0) {
+      if (v >>= cinfo->Al) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Al) break;
+    }
+  } while (--ke);
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  for (kex = ke; kex > 0; kex--)
+    if ((v = (*block)[natural_order[kex]]) >= 0) {
+      if (v >>= cinfo->Ah) break;
+    } else {
+      v = -v;
+      if (v >>= cinfo->Ah) break;
+    }
+
+  /* Figure G.10: Encode_AC_Coefficients_SA */
+  for (k = cinfo->Ss - 1; k < ke;) {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    if (k >= kex)
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+    for (;;) {
+      if ((v = (*block)[natural_order[++k]]) >= 0) {
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 0);
+	  }
+	  break;
+	}
+      } else {
+	v = -v;
+	if (v >>= cinfo->Al) {
+	  if (v >> 1)			/* previously nonzero coef */
+	    arith_encode(cinfo, st + 2, (v & 1));
+	  else {			/* newly nonzero coef */
+	    arith_encode(cinfo, st + 1, 1);
+	    arith_encode(cinfo, entropy->fixed_bin, 1);
+	  }
+	  break;
+	}
+      }
+      arith_encode(cinfo, st + 1, 0);
+      st += 3;
+    }
+  }
+  /* Encode EOB decision only if k < cinfo->Se */
+  if (k < cinfo->Se) {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    arith_encode(cinfo, st, 1);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Encode and output one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  const int * natural_order;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, k, ke;
+  int v, v2, m;
+  int blkn, ci;
+  jpeg_component_info * compptr;
+
+  /* Emit restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0) {
+      emit_restart(cinfo, entropy->next_restart_num);
+      entropy->restarts_to_go = cinfo->restart_interval;
+      entropy->next_restart_num++;
+      entropy->next_restart_num &= 7;
+    }
+    entropy->restarts_to_go--;
+  }
+
+  natural_order = cinfo->natural_order;
+
+  /* Encode the MCU data blocks */
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.4: Encode_DC_DIFF */
+    if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) {
+      arith_encode(cinfo, st, 0);
+      entropy->dc_context[ci] = 0;	/* zero diff category */
+    } else {
+      entropy->last_dc_val[ci] = (*block)[0];
+      arith_encode(cinfo, st, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, st + 1, 0);	/* Table F.4: SS = S0 + 1 */
+	st += 2;			/* Table F.4: SP = S0 + 2 */
+	entropy->dc_context[ci] = 4;	/* small positive diff category */
+      } else {
+	v = -v;
+	arith_encode(cinfo, st + 1, 1);	/* Table F.4: SS = S0 + 1 */
+	st += 3;			/* Table F.4: SN = S0 + 3 */
+	entropy->dc_context[ci] = 8;	/* small negative diff category */
+      }
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */
+	while (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st += 1;
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;	/* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] += 8;	/* large diff category */
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+
+    /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */
+
+    if ((ke = cinfo->lim_Se) == 0) continue;
+    tbl = compptr->ac_tbl_no;
+
+    /* Establish EOB (end-of-block) index */
+    do {
+      if ((*block)[natural_order[ke]]) break;
+    } while (--ke);
+
+    /* Figure F.5: Encode_AC_Coefficients */
+    for (k = 0; k < ke;) {
+      st = entropy->ac_stats[tbl] + 3 * k;
+      arith_encode(cinfo, st, 0);	/* EOB decision */
+      while ((v = (*block)[natural_order[++k]]) == 0) {
+	arith_encode(cinfo, st + 1, 0);
+	st += 3;
+      }
+      arith_encode(cinfo, st + 1, 1);
+      /* Figure F.6: Encoding nonzero value v */
+      /* Figure F.7: Encoding the sign of v */
+      if (v > 0) {
+	arith_encode(cinfo, entropy->fixed_bin, 0);
+      } else {
+	v = -v;
+	arith_encode(cinfo, entropy->fixed_bin, 1);
+      }
+      st += 2;
+      /* Figure F.8: Encoding the magnitude category of v */
+      m = 0;
+      if (v -= 1) {
+	arith_encode(cinfo, st, 1);
+	m = 1;
+	v2 = v;
+	if (v2 >>= 1) {
+	  arith_encode(cinfo, st, 1);
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (v2 >>= 1) {
+	    arith_encode(cinfo, st, 1);
+	    m <<= 1;
+	    st += 1;
+	  }
+	}
+      }
+      arith_encode(cinfo, st, 0);
+      /* Figure F.9: Encoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	arith_encode(cinfo, st, (m & v) ? 1 : 0);
+    }
+    /* Encode EOB decision only if k < cinfo->lim_Se */
+    if (k < cinfo->lim_Se) {
+      st = entropy->ac_stats[tbl] + 3 * k;
+      arith_encode(cinfo, st, 1);
+    }
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_compress_ptr cinfo, boolean gather_statistics)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (gather_statistics)
+    /* Make sure to avoid that in the master control logic!
+     * We are fully adaptive here and need no extra
+     * statistics gathering pass!
+     */
+    ERREXIT(cinfo, JERR_NOT_COMPILED);
+
+  /* We assume jcmaster.c already validated the progressive scan parameters. */
+
+  /* Select execution routines */
+  if (cinfo->progressive_mode) {
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_first;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.encode_mcu = encode_mcu_DC_refine;
+      else
+	entropy->pub.encode_mcu = encode_mcu_AC_refine;
+    }
+  } else
+    entropy->pub.encode_mcu = encode_mcu;
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    /* AC needs no table when not present */
+    if (cinfo->Se) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+#ifdef CALCULATE_SPECTRAL_CONDITIONING
+      if (cinfo->progressive_mode)
+	/* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */
+	cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4);
+#endif
+    }
+  }
+
+  /* Initialize arithmetic encoding variables */
+  entropy->c = 0;
+  entropy->a = 0x10000L;
+  entropy->sc = 0;
+  entropy->zc = 0;
+  entropy->ct = 11;
+  entropy->buffer = -1;  /* empty */
+
+  /* Initialize restart stuff */
+  entropy->restarts_to_go = cinfo->restart_interval;
+  entropy->next_restart_num = 0;
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy encoding.
+ */
+
+GLOBAL(void)
+jinit_arith_encoder (j_compress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_encoder));
+  cinfo->entropy = &entropy->pub;
+  entropy->pub.start_pass = start_pass;
+  entropy->pub.finish_pass = finish_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+}

jccoefct.c

@@ -2,6 +2,7 @@
  * jccoefct.c
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2003-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -149,6 +150,7 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
   int blkn, bi, ci, yindex, yoffset, blockcnt;
   JDIMENSION ypos, xpos;
   jpeg_component_info *compptr;
+  forward_DCT_ptr forward_DCT;
 
   /* Loop to write as much as one whole iMCU row */
   for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row;
@@ -167,35 +169,37 @@ compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
       blkn = 0;
       for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
 	compptr = cinfo->cur_comp_info[ci];
+	forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index];
 	blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
 						: compptr->last_col_width;
 	xpos = MCU_col_num * compptr->MCU_sample_width;
-	ypos = yoffset * DCTSIZE; /* ypos == (yoffset+yindex) * DCTSIZE */
+	ypos = yoffset * compptr->DCT_v_scaled_size;
+	/* ypos == (yoffset+yindex) * DCTSIZE */
 	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
 	  if (coef->iMCU_row_num < last_iMCU_row ||
 	      yoffset+yindex < compptr->last_row_height) {
-	    (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-					 input_buf[compptr->component_index],
-					 coef->MCU_buffer[blkn],
-					 ypos, xpos, (JDIMENSION) blockcnt);
+	    (*forward_DCT) (cinfo, compptr,
+			    input_buf[compptr->component_index],
+			    coef->MCU_buffer[blkn],
+			    ypos, xpos, (JDIMENSION) blockcnt);
 	    if (blockcnt < compptr->MCU_width) {
 	      /* Create some dummy blocks at the right edge of the image. */
-	      jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt],
-			(compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
+	      FMEMZERO((void FAR *) coef->MCU_buffer[blkn + blockcnt],
+		       (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK));
 	      for (bi = blockcnt; bi < compptr->MCU_width; bi++) {
 		coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0];
 	      }
 	    }
 	  } else {
 	    /* Create a row of dummy blocks at the bottom of the image. */
-	    jzero_far((void FAR *) coef->MCU_buffer[blkn],
-		      compptr->MCU_width * SIZEOF(JBLOCK));
+	    FMEMZERO((void FAR *) coef->MCU_buffer[blkn],
+		     compptr->MCU_width * SIZEOF(JBLOCK));
 	    for (bi = 0; bi < compptr->MCU_width; bi++) {
 	      coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0];
 	    }
 	  }
 	  blkn += compptr->MCU_width;
-	  ypos += DCTSIZE;
+	  ypos += compptr->DCT_v_scaled_size;
 	}
       }
       /* Try to write the MCU.  In event of a suspension failure, we will
@@ -252,6 +256,7 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
   jpeg_component_info *compptr;
   JBLOCKARRAY buffer;
   JBLOCKROW thisblockrow, lastblockrow;
+  forward_DCT_ptr forward_DCT;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
@@ -274,19 +279,19 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
     ndummy = (int) (blocks_across % h_samp_factor);
     if (ndummy > 0)
       ndummy = h_samp_factor - ndummy;
+    forward_DCT = cinfo->fdct->forward_DCT[ci];
     /* Perform DCT for all non-dummy blocks in this iMCU row.  Each call
      * on forward_DCT processes a complete horizontal row of DCT blocks.
      */
     for (block_row = 0; block_row < block_rows; block_row++) {
       thisblockrow = buffer[block_row];
-      (*cinfo->fdct->forward_DCT) (cinfo, compptr,
-				   input_buf[ci], thisblockrow,
-				   (JDIMENSION) (block_row * DCTSIZE),
-				   (JDIMENSION) 0, blocks_across);
+      (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow,
+		      (JDIMENSION) (block_row * compptr->DCT_v_scaled_size),
+		      (JDIMENSION) 0, blocks_across);
       if (ndummy > 0) {
 	/* Create dummy blocks at the right edge of the image. */
 	thisblockrow += blocks_across; /* => first dummy block */
-	jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
+	FMEMZERO((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK));
 	lastDC = thisblockrow[-1][0];
 	for (bi = 0; bi < ndummy; bi++) {
 	  thisblockrow[bi][0] = lastDC;
@@ -305,8 +310,8 @@ compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf)
 	   block_row++) {
 	thisblockrow = buffer[block_row];
 	lastblockrow = buffer[block_row-1];
-	jzero_far((void FAR *) thisblockrow,
-		  (size_t) (blocks_across * SIZEOF(JBLOCK)));
+	FMEMZERO((void FAR *) thisblockrow,
+		 (size_t) (blocks_across * SIZEOF(JBLOCK)));
 	for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) {
 	  lastDC = lastblockrow[h_samp_factor-1][0];
 	  for (bi = 0; bi < h_samp_factor; bi++) {

jccolor.c

@@ -2,8 +2,7 @@
  * jccolor.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
- * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
- * Copyright 2009 D. R. Commander
+ * Modified 2011-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -13,7 +12,6 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
-#include "jsimd.h"
 
 
 /* Private subobject */
@@ -31,13 +29,25 @@ typedef my_color_converter * my_cconvert_ptr;
 /**************** RGB -> YCbCr conversion: most common case **************/
 
 /*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- * The conversion equations to be implemented are therefore
- *	Y  =  0.29900 * R + 0.58700 * G + 0.11400 * B
- *	Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B  + CENTERJSAMPLE
- *	Cr =  0.50000 * R - 0.41869 * G - 0.08131 * B  + CENTERJSAMPLE
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011),
+ * previously known as Recommendation CCIR 601-1, except that Cb and Cr
+ * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999.
+ * sYCC (standard luma-chroma-chroma color space with extended gamut)
+ * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F.
+ * bg-sRGB and bg-sYCC (big gamut standard color spaces)
+ * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G.
+ * Note that the derived conversion coefficients given in some of these
+ * documents are imprecise.  The general conversion equations are
+ *	Y  = Kr * R + (1 - Kr - Kb) * G + Kb * B
+ *	Cb = 0.5 * (B - Y) / (1 - Kb)
+ *	Cr = 0.5 * (R - Y) / (1 - Kr)
+ * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993
+ * from the 1953 FCC NTSC primaries and CIE Illuminant C),
+ * the conversion equations to be implemented are therefore
+ *	Y  =  0.299 * R + 0.587 * G + 0.114 * B
+ *	Cb = -0.168735892 * R - 0.331264108 * G + 0.5 * B + CENTERJSAMPLE
+ *	Cr =  0.5 * R - 0.418687589 * G - 0.081312411 * B + CENTERJSAMPLE
  * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2,
  * rather than CENTERJSAMPLE, for Cb and Cr.  This gave equal positive and
  * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0)
@@ -51,9 +61,9 @@ typedef my_color_converter * my_cconvert_ptr;
  * For even more speed, we avoid doing any multiplications in the inner loop
  * by precalculating the constants times R,G,B for all possible values.
  * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable.  It's not very reasonable for
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
- * colorspace anyway.
+ * for 9-bit to 12-bit samples it is still acceptable.  It's not very
+ * reasonable for 16-bit samples, but if you want lossless storage you
+ * shouldn't be changing colorspace anyway.
  * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included
  * in the tables to save adding them separately in the inner loop.
  */
@@ -81,74 +91,6 @@ typedef my_color_converter * my_cconvert_ptr;
 #define TABLE_SIZE	(8*(MAXJSAMPLE+1))
 
 
-#if BITS_IN_JSAMPLE == 8
-
-const unsigned char red_lut[256] = {
-  0 , 0 , 1 , 1 , 1 , 1 , 2 , 2 , 2 , 3 , 3 , 3 , 4 , 4 , 4 , 4 ,
-  5 , 5 , 5 , 6 , 6 , 6 , 7 , 7 , 7 , 7 , 8 , 8 , 8 , 9 , 9 , 9 ,
-  10, 10, 10, 10, 11, 11, 11, 12, 12, 12, 13, 13, 13, 13, 14, 14,
-  14, 15, 15, 15, 16, 16, 16, 16, 17, 17, 17, 18, 18, 18, 19, 19,
-  19, 19, 20, 20, 20, 21, 21, 21, 22, 22, 22, 22, 23, 23, 23, 24,
-  24, 24, 25, 25, 25, 25, 26, 26, 26, 27, 27, 27, 28, 28, 28, 28,
-  29, 29, 29, 30, 30, 30, 30, 31, 31, 31, 32, 32, 32, 33, 33, 33,
-  33, 34, 34, 34, 35, 35, 35, 36, 36, 36, 36, 37, 37, 37, 38, 38,
-  38, 39, 39, 39, 39, 40, 40, 40, 41, 41, 41, 42, 42, 42, 42, 43,
-  43, 43, 44, 44, 44, 45, 45, 45, 45, 46, 46, 46, 47, 47, 47, 48,
-  48, 48, 48, 49, 49, 49, 50, 50, 50, 51, 51, 51, 51, 52, 52, 52,
-  53, 53, 53, 54, 54, 54, 54, 55, 55, 55, 56, 56, 56, 57, 57, 57,
-  57, 58, 58, 58, 59, 59, 59, 60, 60, 60, 60, 61, 61, 61, 62, 62,
-  62, 62, 63, 63, 63, 64, 64, 64, 65, 65, 65, 65, 66, 66, 66, 67,
-  67, 67, 68, 68, 68, 68, 69, 69, 69, 70, 70, 70, 71, 71, 71, 71,
-  72, 72, 72, 73, 73, 73, 74, 74, 74, 74, 75, 75, 75, 76, 76, 76
-};
-
-const unsigned char green_lut[256] = {
-  0  , 1  , 1  , 2  , 2  , 3  , 4  , 4  , 5  , 5  , 6  , 6  ,
-  7  , 8  , 8  , 9  , 9  , 10 , 11 , 11 , 12 , 12 , 13 , 14 ,
-  14 , 15 , 15 , 16 , 16 , 17 , 18 , 18 , 19 , 19 , 20 , 21 ,
-  21 , 22 , 22 , 23 , 23 , 24 , 25 , 25 , 26 , 26 , 27 , 28 ,
-  28 , 29 , 29 , 30 , 31 , 31 , 32 , 32 , 33 , 33 , 34 , 35 ,
-  35 , 36 , 36 , 37 , 38 , 38 , 39 , 39 , 40 , 41 , 41 , 42 ,
-  42 , 43 , 43 , 44 , 45 , 45 , 46 , 46 , 47 , 48 , 48 , 49 ,
-  49 , 50 , 50 , 51 , 52 , 52 , 53 , 53 , 54 , 55 , 55 , 56 ,
-  56 , 57 , 58 , 58 , 59 , 59 , 60 , 60 , 61 , 62 , 62 , 63 ,
-  63 , 64 , 65 , 65 , 66 , 66 , 67 , 68 , 68 , 69 , 69 , 70 ,
-  70 , 71 , 72 , 72 , 73 , 73 , 74 , 75 , 75 , 76 , 76 , 77 ,
-  77 , 78 , 79 , 79 , 80 , 80 , 81 , 82 , 82 , 83 , 83 , 84 ,
-  85 , 85 , 86 , 86 , 87 , 87 , 88 , 89 , 89 , 90 , 90 , 91 ,
-  92 , 92 , 93 , 93 , 94 , 95 , 95 , 96 , 96 , 97 , 97 , 98 ,
-  99 , 99 , 100, 100, 101, 102, 102, 103, 103, 104, 104, 105,
-  106, 106, 107, 107, 108, 109, 109, 110, 110, 111, 112, 112,
-  113, 113, 114, 114, 115, 116, 116, 117, 117, 118, 119, 119,
-  120, 120, 121, 122, 122, 123, 123, 124, 124, 125, 126, 126,
-  127, 127, 128, 129, 129, 130, 130, 131, 131, 132, 133, 133,
-  34, 134, 135, 136, 136, 137, 137, 138, 139, 139, 140, 140,
-  141, 141, 142, 143, 143, 144, 144, 145, 146, 146, 147, 147,
-  148, 149, 149, 150
-};
-
-const unsigned char blue_lut[256] = {
-  0 , 0 , 0 , 0 , 0 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 1 , 2 , 2 ,
-  2 , 2 , 2 , 2 , 2 , 2 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 3 , 4 ,
-  4 , 4 , 4 , 4 , 4 , 4 , 4 , 4 , 5 , 5 , 5 , 5 , 5 , 5 , 5 , 5 ,
-  5 , 6 , 6 , 6 , 6 , 6 , 6 , 6 , 6 , 6 , 7 , 7 , 7 , 7 , 7 , 7 ,
-  7 , 7 , 8 , 8 , 8 , 8 , 8 , 8 , 8 , 8 , 8 , 9 , 9 , 9 , 9 , 9 ,
-  9 , 9 , 9 , 9 , 10, 10, 10, 10, 10, 10, 10, 10, 10, 11, 11, 11,
-  11, 11, 11, 11, 11, 12, 12, 12, 12, 12, 12, 12, 12, 12, 13, 13,
-  13, 13, 13, 13, 13, 13, 13, 14, 14, 14, 14, 14, 14, 14, 14, 14,
-  15, 15, 15, 15, 15, 15, 15, 15, 16, 16, 16, 16, 16, 16, 16, 16,
-  16, 17, 17, 17, 17, 17, 17, 17, 17, 17, 18, 18, 18, 18, 18, 18,
-  18, 18, 18, 19, 19, 19, 19, 19, 19, 19, 19, 19, 20, 20, 20, 20,
-  20, 20, 20, 20, 21, 21, 21, 21, 21, 21, 21, 21, 21, 22, 22, 22,
-  22, 22, 22, 22, 22, 22, 23, 23, 23, 23, 23, 23, 23, 23, 23, 24,
-  24, 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 25, 25, 25, 25, 25,
-  26, 26, 26, 26, 26, 26, 26, 26, 26, 27, 27, 27, 27, 27, 27, 27,
-  27, 27, 28, 28, 28, 28, 28, 28, 28, 28, 29, 29, 29, 29, 29, 29
-};
-
-#endif
-
-
 /*
  * Initialize for RGB->YCC colorspace conversion.
  */
@@ -166,21 +108,21 @@ rgb_ycc_start (j_compress_ptr cinfo)
 				(TABLE_SIZE * SIZEOF(INT32)));
 
   for (i = 0; i <= MAXJSAMPLE; i++) {
-    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i;
-    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i;
-    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i     + ONE_HALF;
-    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i;
-    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i;
+    rgb_ycc_tab[i+R_Y_OFF] = FIX(0.299) * i;
+    rgb_ycc_tab[i+G_Y_OFF] = FIX(0.587) * i;
+    rgb_ycc_tab[i+B_Y_OFF] = FIX(0.114) * i   + ONE_HALF;
+    rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.168735892)) * i;
+    rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.331264108)) * i;
     /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr.
      * This ensures that the maximum output will round to MAXJSAMPLE
      * not MAXJSAMPLE+1, and thus that we don't have to range-limit.
      */
-    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+    rgb_ycc_tab[i+B_CB_OFF] = FIX(0.5) * i    + CBCR_OFFSET + ONE_HALF-1;
 /*  B=>Cb and R=>Cr tables are the same
-    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i    + CBCR_OFFSET + ONE_HALF-1;
+    rgb_ycc_tab[i+R_CR_OFF] = FIX(0.5) * i    + CBCR_OFFSET + ONE_HALF-1;
 */
-    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i;
-    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i;
+    rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.418687589)) * i;
+    rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.081312411)) * i;
   }
 }
 
@@ -203,8 +145,8 @@ rgb_ycc_convert (j_compress_ptr cinfo,
 		 JDIMENSION output_row, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
   register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register int r, g, b;
   register JSAMPROW inptr;
   register JSAMPROW outptr0, outptr1, outptr2;
   register JDIMENSION col;
@@ -217,10 +159,9 @@ rgb_ycc_convert (j_compress_ptr cinfo,
     outptr2 = output_buf[2][output_row];
     output_row++;
     for (col = 0; col < num_cols; col++) {
-      r = GETJSAMPLE(inptr[rgb_red[cinfo->in_color_space]]);
-      g = GETJSAMPLE(inptr[rgb_green[cinfo->in_color_space]]);
-      b = GETJSAMPLE(inptr[rgb_blue[cinfo->in_color_space]]);
-      inptr += rgb_pixelsize[cinfo->in_color_space];
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
       /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
        * must be too; we do not need an explicit range-limiting operation.
        * Hence the value being shifted is never negative, and we don't
@@ -238,6 +179,7 @@ rgb_ycc_convert (j_compress_ptr cinfo,
       outptr2[col] = (JSAMPLE)
 		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
 		 >> SCALEBITS);
+      inptr += RGB_PIXELSIZE;
     }
   }
 }
@@ -259,36 +201,25 @@ rgb_gray_convert (j_compress_ptr cinfo,
 		  JDIMENSION output_row, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  #if BITS_IN_JSAMPLE != 8
   register INT32 * ctab = cconvert->rgb_ycc_tab;
-  #endif
+  register int r, g, b;
   register JSAMPROW inptr;
   register JSAMPROW outptr;
-  JSAMPLE *maxoutptr;
   register JDIMENSION col;
   JDIMENSION num_cols = cinfo->image_width;
-  int rindex = rgb_red[cinfo->in_color_space];
-  int gindex = rgb_green[cinfo->in_color_space];
-  int bindex = rgb_blue[cinfo->in_color_space];
-  int rgbstride = rgb_pixelsize[cinfo->in_color_space];
 
   while (--num_rows >= 0) {
     inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    maxoutptr = &outptr[num_cols];
-    output_row++;
-    for (; outptr < maxoutptr; outptr++, inptr += rgbstride) {
+    outptr = output_buf[0][output_row++];
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
       /* Y */
-      #if BITS_IN_JSAMPLE == 8
-      *outptr = red_lut[inptr[rindex]] + green_lut[inptr[gindex]]
-	    + blue_lut[inptr[bindex]];
-      #else
-      *outptr = (JSAMPLE)
-	    ((ctab[GETJSAMPLE(inptr[rindex])+R_Y_OFF]
-	     + ctab[GETJSAMPLE(inptr[gindex])+G_Y_OFF]
-	     + ctab[GETJSAMPLE(inptr[bindex])+B_Y_OFF])
-	     >> SCALEBITS);
-      #endif
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+      inptr += RGB_PIXELSIZE;
     }
   }
 }
@@ -308,8 +239,8 @@ cmyk_ycck_convert (j_compress_ptr cinfo,
 		   JDIMENSION output_row, int num_rows)
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
-  register int r, g, b;
   register INT32 * ctab = cconvert->rgb_ycc_tab;
+  register int r, g, b;
   register JSAMPROW inptr;
   register JSAMPROW outptr0, outptr1, outptr2, outptr3;
   register JDIMENSION col;
@@ -328,7 +259,6 @@ cmyk_ycck_convert (j_compress_ptr cinfo,
       b = MAXJSAMPLE - GETJSAMPLE(inptr[2]);
       /* K passes through as-is */
       outptr3[col] = inptr[3];	/* don't need GETJSAMPLE here */
-      inptr += 4;
       /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations
        * must be too; we do not need an explicit range-limiting operation.
        * Hence the value being shifted is never negative, and we don't
@@ -346,6 +276,49 @@ cmyk_ycck_convert (j_compress_ptr cinfo,
       outptr2[col] = (JSAMPLE)
 		((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF])
 		 >> SCALEBITS);
+      inptr += 4;
+    }
+  }
+}
+
+
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * [R,G,B] to [R-G,G,B-G] conversion with modulo calculation
+ * (forward reversible color transform).
+ * This can be seen as an adaption of the general RGB->YCbCr
+ * conversion equation with Kr = Kb = 0, while replacing the
+ * normalization by modulo calculation.
+ */
+
+METHODDEF(void)
+rgb_rgb1_convert (j_compress_ptr cinfo,
+		  JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+		  JDIMENSION output_row, int num_rows)
+{
+  register int r, g, b;
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr[RGB_RED]);
+      g = GETJSAMPLE(inptr[RGB_GREEN]);
+      b = GETJSAMPLE(inptr[RGB_BLUE]);
+      /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD
+       * (modulo) operator is equivalent to the bitmask operator AND.
+       */
+      outptr0[col] = (JSAMPLE) ((r - g + CENTERJSAMPLE) & MAXJSAMPLE);
+      outptr1[col] = (JSAMPLE) g;
+      outptr2[col] = (JSAMPLE) ((b - g + CENTERJSAMPLE) & MAXJSAMPLE);
+      inptr += RGB_PIXELSIZE;
     }
   }
 }
@@ -354,7 +327,7 @@ cmyk_ycck_convert (j_compress_ptr cinfo,
 /*
  * Convert some rows of samples to the JPEG colorspace.
  * This version handles grayscale output with no conversion.
- * The source can be either plain grayscale or YCbCr (since Y == gray).
+ * The source can be either plain grayscale or YCC (since Y == gray).
  */
 
 METHODDEF(void)
@@ -362,16 +335,15 @@ grayscale_convert (j_compress_ptr cinfo,
 		   JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
 		   JDIMENSION output_row, int num_rows)
 {
+  int instride = cinfo->input_components;
   register JSAMPROW inptr;
   register JSAMPROW outptr;
   register JDIMENSION col;
   JDIMENSION num_cols = cinfo->image_width;
-  int instride = cinfo->input_components;
 
   while (--num_rows >= 0) {
     inptr = *input_buf++;
-    outptr = output_buf[0][output_row];
-    output_row++;
+    outptr = output_buf[0][output_row++];
     for (col = 0; col < num_cols; col++) {
       outptr[col] = inptr[0];	/* don't need GETJSAMPLE() here */
       inptr += instride;
@@ -380,6 +352,39 @@ grayscale_convert (j_compress_ptr cinfo,
 }
 
 
+/*
+ * Convert some rows of samples to the JPEG colorspace.
+ * No colorspace conversion, but change from interleaved
+ * to separate-planes representation.
+ */
+
+METHODDEF(void)
+rgb_convert (j_compress_ptr cinfo,
+	     JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+	     JDIMENSION output_row, int num_rows)
+{
+  register JSAMPROW inptr;
+  register JSAMPROW outptr0, outptr1, outptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->image_width;
+
+  while (--num_rows >= 0) {
+    inptr = *input_buf++;
+    outptr0 = output_buf[0][output_row];
+    outptr1 = output_buf[1][output_row];
+    outptr2 = output_buf[2][output_row];
+    output_row++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr0[col] = inptr[RGB_RED];
+      outptr1[col] = inptr[RGB_GREEN];
+      outptr2[col] = inptr[RGB_BLUE];
+      inptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
 /*
  * Convert some rows of samples to the JPEG colorspace.
  * This version handles multi-component colorspaces without conversion.
@@ -391,20 +396,20 @@ null_convert (j_compress_ptr cinfo,
 	      JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
 	      JDIMENSION output_row, int num_rows)
 {
+  int ci;
+  register int nc = cinfo->num_components;
   register JSAMPROW inptr;
   register JSAMPROW outptr;
   register JDIMENSION col;
-  register int ci;
-  int nc = cinfo->num_components;
   JDIMENSION num_cols = cinfo->image_width;
 
   while (--num_rows >= 0) {
     /* It seems fastest to make a separate pass for each component. */
     for (ci = 0; ci < nc; ci++) {
-      inptr = *input_buf;
+      inptr = input_buf[0] + ci;
       outptr = output_buf[ci][output_row];
       for (col = 0; col < num_cols; col++) {
-	outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */
+	*outptr++ = *inptr;	/* don't need GETJSAMPLE() here */
 	inptr += nc;
       }
     }
@@ -437,7 +442,7 @@ jinit_color_converter (j_compress_ptr cinfo)
   cconvert = (my_cconvert_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_color_converter));
-  cinfo->cconvert = (struct jpeg_color_converter *) cconvert;
+  cinfo->cconvert = &cconvert->pub;
   /* set start_pass to null method until we find out differently */
   cconvert->pub.start_pass = null_method;
 
@@ -449,17 +454,13 @@ jinit_color_converter (j_compress_ptr cinfo)
     break;
 
   case JCS_RGB:
-  case JCS_EXT_RGB:
-  case JCS_EXT_RGBX:
-  case JCS_EXT_BGR:
-  case JCS_EXT_BGRX:
-  case JCS_EXT_XBGR:
-  case JCS_EXT_XRGB:
-    if (cinfo->input_components != rgb_pixelsize[cinfo->in_color_space])
+  case JCS_BG_RGB:
+    if (cinfo->input_components != RGB_PIXELSIZE)
       ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
     break;
 
   case JCS_YCbCr:
+  case JCS_BG_YCC:
     if (cinfo->input_components != 3)
       ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
     break;
@@ -476,64 +477,96 @@ jinit_color_converter (j_compress_ptr cinfo)
     break;
   }
 
+  /* Support color transform only for RGB colorspaces */
+  if (cinfo->color_transform &&
+      cinfo->jpeg_color_space != JCS_RGB &&
+      cinfo->jpeg_color_space != JCS_BG_RGB)
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+
   /* Check num_components, set conversion method based on requested space */
   switch (cinfo->jpeg_color_space) {
   case JCS_GRAYSCALE:
     if (cinfo->num_components != 1)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_GRAYSCALE)
+    switch (cinfo->in_color_space) {
+    case JCS_GRAYSCALE:
+    case JCS_YCbCr:
+    case JCS_BG_YCC:
       cconvert->pub.color_convert = grayscale_convert;
-    else if (cinfo->in_color_space == JCS_RGB ||
-             cinfo->in_color_space == JCS_EXT_RGB ||
-             cinfo->in_color_space == JCS_EXT_RGBX ||
-             cinfo->in_color_space == JCS_EXT_BGR ||
-             cinfo->in_color_space == JCS_EXT_BGRX ||
-             cinfo->in_color_space == JCS_EXT_XBGR ||
-             cinfo->in_color_space == JCS_EXT_XRGB) {
+      break;
+    case JCS_RGB:
       cconvert->pub.start_pass = rgb_ycc_start;
       cconvert->pub.color_convert = rgb_gray_convert;
-    } else if (cinfo->in_color_space == JCS_YCbCr)
-      cconvert->pub.color_convert = grayscale_convert;
-    else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   case JCS_RGB:
-  case JCS_EXT_RGB:
-  case JCS_EXT_RGBX:
-  case JCS_EXT_BGR:
-  case JCS_EXT_BGRX:
-  case JCS_EXT_XBGR:
-  case JCS_EXT_XRGB:
+  case JCS_BG_RGB:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == cinfo->jpeg_color_space &&
-      rgb_pixelsize[cinfo->in_color_space] == 3)
-      cconvert->pub.color_convert = null_convert;
-    else
+    if (cinfo->in_color_space == cinfo->jpeg_color_space) {
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_convert;
+	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb_rgb1_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+      }
+    } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
 
   case JCS_YCbCr:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_RGB ||
-        cinfo->in_color_space == JCS_EXT_RGB ||
-        cinfo->in_color_space == JCS_EXT_RGBX ||
-        cinfo->in_color_space == JCS_EXT_BGR ||
-        cinfo->in_color_space == JCS_EXT_BGRX ||
-        cinfo->in_color_space == JCS_EXT_XBGR ||
-        cinfo->in_color_space == JCS_EXT_XRGB) {
-      if (jsimd_can_rgb_ycc())
-        cconvert->pub.color_convert = jsimd_rgb_ycc_convert;
-      else {
-        cconvert->pub.start_pass = rgb_ycc_start;
-        cconvert->pub.color_convert = rgb_ycc_convert;
-      }
-    } else if (cinfo->in_color_space == JCS_YCbCr)
+    switch (cinfo->in_color_space) {
+    case JCS_RGB:
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = rgb_ycc_convert;
+      break;
+    case JCS_YCbCr:
       cconvert->pub.color_convert = null_convert;
-    else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
+    break;
+
+  case JCS_BG_YCC:
+    if (cinfo->num_components != 3)
+      ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
+    switch (cinfo->in_color_space) {
+    case JCS_RGB:
+      /* For conversion from normal RGB input to BG_YCC representation,
+       * the Cb/Cr values are first computed as usual, and then
+       * quantized further after DCT processing by a factor of
+       * 2 in reference to the nominal quantization factor.
+       */
+      /* need quantization scale by factor of 2 after DCT */
+      cinfo->comp_info[1].component_needed = TRUE;
+      cinfo->comp_info[2].component_needed = TRUE;
+      /* compute normal YCC first */
+      cconvert->pub.start_pass = rgb_ycc_start;
+      cconvert->pub.color_convert = rgb_ycc_convert;
+      break;
+    case JCS_YCbCr:
+      /* need quantization scale by factor of 2 after DCT */
+      cinfo->comp_info[1].component_needed = TRUE;
+      cinfo->comp_info[2].component_needed = TRUE;
+      /*FALLTHROUGH*/
+    case JCS_BG_YCC:
+      /* Pass through for BG_YCC input */
+      cconvert->pub.color_convert = null_convert;
+      break;
+    default:
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   case JCS_CMYK:
@@ -548,13 +581,17 @@ jinit_color_converter (j_compress_ptr cinfo)
   case JCS_YCCK:
     if (cinfo->num_components != 4)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
-    if (cinfo->in_color_space == JCS_CMYK) {
+    switch (cinfo->in_color_space) {
+    case JCS_CMYK:
       cconvert->pub.start_pass = rgb_ycc_start;
       cconvert->pub.color_convert = cmyk_ycck_convert;
-    } else if (cinfo->in_color_space == JCS_YCCK)
+      break;
+    case JCS_YCCK:
       cconvert->pub.color_convert = null_convert;
-    else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   default:			/* allow null conversion of JCS_UNKNOWN */

jcdctmgr.c

@@ -2,8 +2,7 @@
  * jcdctmgr.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Copyright (C) 1999-2006, MIYASAKA Masaru.
- * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -17,180 +16,166 @@
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jdct.h"		/* Private declarations for DCT subsystem */
-#include "jsimddct.h"
 
 
 /* Private subobject for this module */
 
-typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data));
-typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data));
-
-typedef JMETHOD(void, convsamp_method_ptr,
-                (JSAMPARRAY sample_data, JDIMENSION start_col,
-                 DCTELEM * workspace));
-typedef JMETHOD(void, float_convsamp_method_ptr,
-                (JSAMPARRAY sample_data, JDIMENSION start_col,
-                 FAST_FLOAT *workspace));
-
-typedef JMETHOD(void, quantize_method_ptr,
-                (JCOEFPTR coef_block, DCTELEM * divisors,
-                 DCTELEM * workspace));
-typedef JMETHOD(void, float_quantize_method_ptr,
-                (JCOEFPTR coef_block, FAST_FLOAT * divisors,
-                 FAST_FLOAT * workspace));
-
 typedef struct {
   struct jpeg_forward_dct pub;	/* public fields */
 
   /* Pointer to the DCT routine actually in use */
-  forward_DCT_method_ptr dct;
-  convsamp_method_ptr convsamp;
-  quantize_method_ptr quantize;
-
-  /* The actual post-DCT divisors --- not identical to the quant table
-   * entries, because of scaling (especially for an unnormalized DCT).
-   * Each table is given in normal array order.
-   */
-  DCTELEM * divisors[NUM_QUANT_TBLS];
-
-  /* work area for FDCT subroutine */
-  DCTELEM * workspace;
+  forward_DCT_method_ptr do_dct[MAX_COMPONENTS];
 
 #ifdef DCT_FLOAT_SUPPORTED
   /* Same as above for the floating-point case. */
-  float_DCT_method_ptr float_dct;
-  float_convsamp_method_ptr float_convsamp;
-  float_quantize_method_ptr float_quantize;
-  FAST_FLOAT * float_divisors[NUM_QUANT_TBLS];
-  FAST_FLOAT * float_workspace;
+  float_DCT_method_ptr do_float_dct[MAX_COMPONENTS];
 #endif
 } my_fdct_controller;
 
 typedef my_fdct_controller * my_fdct_ptr;
 
 
-/*
- * Find the highest bit in an integer through binary search.
+/* The allocated post-DCT divisor tables -- big enough for any
+ * supported variant and not identical to the quant table entries,
+ * because of scaling (especially for an unnormalized DCT) --
+ * are pointed to by dct_table in the per-component comp_info
+ * structures.  Each table is given in normal array order.
  */
-LOCAL(int)
-flss (UINT16 val)
-{
-  int bit;
 
-  bit = 16;
+typedef union {
+  DCTELEM int_array[DCTSIZE2];
+#ifdef DCT_FLOAT_SUPPORTED
+  FAST_FLOAT float_array[DCTSIZE2];
+#endif
+} divisor_table;
 
-  if (!val)
-    return 0;
 
-  if (!(val & 0xff00)) {
-    bit -= 8;
-    val <<= 8;
-  }
-  if (!(val & 0xf000)) {
-    bit -= 4;
-    val <<= 4;
-  }
-  if (!(val & 0xc000)) {
-    bit -= 2;
-    val <<= 2;
-  }
-  if (!(val & 0x8000)) {
-    bit -= 1;
-    val <<= 1;
-  }
+/* The current scaled-DCT routines require ISLOW-style divisor tables,
+ * so be sure to compile that code if either ISLOW or SCALING is requested.
+ */
+#ifdef DCT_ISLOW_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#else
+#ifdef DCT_SCALING_SUPPORTED
+#define PROVIDE_ISLOW_TABLES
+#endif
+#endif
 
-  return bit;
-}
 
 /*
- * Compute values to do a division using reciprocal.
+ * Perform forward DCT on one or more blocks of a component.
  *
- * This implementation is based on an algorithm described in
- *   "How to optimize for the Pentium family of microprocessors"
- *   (http://www.agner.org/assem/).
- * More information about the basic algorithm can be found in
- * the paper "Integer Division Using Reciprocals" by Robert Alverson.
- *
- * The basic idea is to replace x/d by x * d^-1. In order to store
- * d^-1 with enough precision we shift it left a few places. It turns
- * out that this algoright gives just enough precision, and also fits
- * into DCTELEM:
- *
- *   b = (the number of significant bits in divisor) - 1
- *   r = (word size) + b
- *   f = 2^r / divisor
- *
- * f will not be an integer for most cases, so we need to compensate
- * for the rounding error introduced:
- *
- *   no fractional part:
- *
- *       result = input >> r
- *
- *   fractional part of f < 0.5:
- *
- *       round f down to nearest integer
- *       result = ((input + 1) * f) >> r
- *
- *   fractional part of f > 0.5:
- *
- *       round f up to nearest integer
- *       result = (input * f) >> r
- *
- * This is the original algorithm that gives truncated results. But we
- * want properly rounded results, so we replace "input" with
- * "input + divisor/2".
- *
- * In order to allow SIMD implementations we also tweak the values to
- * allow the same calculation to be made at all times:
- * 
- *   dctbl[0] = f rounded to nearest integer
- *   dctbl[1] = divisor / 2 (+ 1 if fractional part of f < 0.5)
- *   dctbl[2] = 1 << ((word size) * 2 - r)
- *   dctbl[3] = r - (word size)
- *
- * dctbl[2] is for stupid instruction sets where the shift operation
- * isn't member wise (e.g. MMX).
- *
- * The reason dctbl[2] and dctbl[3] reduce the shift with (word size)
- * is that most SIMD implementations have a "multiply and store top
- * half" operation.
- *
- * Lastly, we store each of the values in their own table instead
- * of in a consecutive manner, yet again in order to allow SIMD
- * routines.
+ * The input samples are taken from the sample_data[] array starting at
+ * position start_row/start_col, and moving to the right for any additional
+ * blocks. The quantized coefficients are returned in coef_blocks[].
  */
-LOCAL(void)
-compute_reciprocal (UINT16 divisor, DCTELEM * dtbl)
+
+METHODDEF(void)
+forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
+	     JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+	     JDIMENSION start_row, JDIMENSION start_col,
+	     JDIMENSION num_blocks)
+/* This version is used for integer DCT implementations. */
 {
-  UDCTELEM2 fq, fr;
-  UDCTELEM c;
-  int b, r;
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index];
+  DCTELEM * divisors = (DCTELEM *) compptr->dct_table;
+  DCTELEM workspace[DCTSIZE2];	/* work area for FDCT subroutine */
+  JDIMENSION bi;
 
-  b = flss(divisor) - 1;
-  r  = sizeof(DCTELEM) * 8 + b;
+  sample_data += start_row;	/* fold in the vertical offset once */
 
-  fq = ((UDCTELEM2)1 << r) / divisor;
-  fr = ((UDCTELEM2)1 << r) % divisor;
+  for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) {
+    /* Perform the DCT */
+    (*do_dct) (workspace, sample_data, start_col);
 
-  c = divisor / 2; /* for rounding */
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register DCTELEM temp, qval;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
 
-  if (fr == 0) { /* divisor is power of two */
-    /* fq will be one bit too large to fit in DCTELEM, so adjust */
-    fq >>= 1;
-    r--;
-  } else if (fr <= (divisor / 2)) { /* fractional part is < 0.5 */
-    c++;
-  } else { /* fractional part is > 0.5 */
-    fq++;
+      for (i = 0; i < DCTSIZE2; i++) {
+	qval = divisors[i];
+	temp = workspace[i];
+	/* Divide the coefficient value by qval, ensuring proper rounding.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 *
+	 * In most files, at least half of the output values will be zero
+	 * (at default quantization settings, more like three-quarters...)
+	 * so we should ensure that this case is fast.  On many machines,
+	 * a comparison is enough cheaper than a divide to make a special test
+	 * a win.  Since both inputs will be nonnegative, we need only test
+	 * for a < b to discover whether a/b is 0.
+	 * If your machine's division is fast enough, define FAST_DIVIDE.
+	 */
+#ifdef FAST_DIVIDE
+#define DIVIDE_BY(a,b)	a /= b
+#else
+#define DIVIDE_BY(a,b)	if (a >= b) a /= b; else a = 0
+#endif
+	if (temp < 0) {
+	  temp = -temp;
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	  temp = -temp;
+	} else {
+	  temp += qval>>1;	/* for rounding */
+	  DIVIDE_BY(temp, qval);
+	}
+	output_ptr[i] = (JCOEF) temp;
+      }
+    }
   }
-
-  dtbl[DCTSIZE2 * 0] = (DCTELEM) fq;      /* reciprocal */
-  dtbl[DCTSIZE2 * 1] = (DCTELEM) c;       /* correction + roundfactor */
-  dtbl[DCTSIZE2 * 2] = (DCTELEM) (1 << (sizeof(DCTELEM)*8*2 - r));  /* scale */
-  dtbl[DCTSIZE2 * 3] = (DCTELEM) r - sizeof(DCTELEM)*8; /* shift */
 }
 
+
+#ifdef DCT_FLOAT_SUPPORTED
+
+METHODDEF(void)
+forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
+		   JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+		   JDIMENSION start_row, JDIMENSION start_col,
+		   JDIMENSION num_blocks)
+/* This version is used for floating-point DCT implementations. */
+{
+  /* This routine is heavily used, so it's worth coding it tightly. */
+  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
+  float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index];
+  FAST_FLOAT * divisors = (FAST_FLOAT *) compptr->dct_table;
+  FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */
+  JDIMENSION bi;
+
+  sample_data += start_row;	/* fold in the vertical offset once */
+
+  for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) {
+    /* Perform the DCT */
+    (*do_dct) (workspace, sample_data, start_col);
+
+    /* Quantize/descale the coefficients, and store into coef_blocks[] */
+    { register FAST_FLOAT temp;
+      register int i;
+      register JCOEFPTR output_ptr = coef_blocks[bi];
+
+      for (i = 0; i < DCTSIZE2; i++) {
+	/* Apply the quantization and scaling factor */
+	temp = workspace[i] * divisors[i];
+	/* Round to nearest integer.
+	 * Since C does not specify the direction of rounding for negative
+	 * quotients, we have to force the dividend positive for portability.
+	 * The maximum coefficient size is +-16K (for 12-bit data), so this
+	 * code should work for either 16-bit or 32-bit ints.
+	 */
+	output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
+      }
+    }
+  }
+}
+
+#endif /* DCT_FLOAT_SUPPORTED */
+
+
 /*
  * Initialize for a processing pass.
  * Verify that all referenced Q-tables are present, and set up
@@ -206,34 +191,189 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
   my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
   int ci, qtblno, i;
   jpeg_component_info *compptr;
+  int method = 0;
   JQUANT_TBL * qtbl;
   DCTELEM * dtbl;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
+    /* Select the proper DCT routine for this component's scaling */
+    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
+#ifdef DCT_SCALING_SUPPORTED
+    case ((1 << 8) + 1):
+      fdct->do_dct[ci] = jpeg_fdct_1x1;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_2x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((3 << 8) + 3):
+      fdct->do_dct[ci] = jpeg_fdct_3x3;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_4x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((5 << 8) + 5):
+      fdct->do_dct[ci] = jpeg_fdct_5x5;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_6x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((7 << 8) + 7):
+      fdct->do_dct[ci] = jpeg_fdct_7x7;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((9 << 8) + 9):
+      fdct->do_dct[ci] = jpeg_fdct_9x9;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((10 << 8) + 10):
+      fdct->do_dct[ci] = jpeg_fdct_10x10;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((11 << 8) + 11):
+      fdct->do_dct[ci] = jpeg_fdct_11x11;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((12 << 8) + 12):
+      fdct->do_dct[ci] = jpeg_fdct_12x12;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((13 << 8) + 13):
+      fdct->do_dct[ci] = jpeg_fdct_13x13;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((14 << 8) + 14):
+      fdct->do_dct[ci] = jpeg_fdct_14x14;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((15 << 8) + 15):
+      fdct->do_dct[ci] = jpeg_fdct_15x15;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((16 << 8) + 16):
+      fdct->do_dct[ci] = jpeg_fdct_16x16;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((16 << 8) + 8):
+      fdct->do_dct[ci] = jpeg_fdct_16x8;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((14 << 8) + 7):
+      fdct->do_dct[ci] = jpeg_fdct_14x7;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((12 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_12x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((10 << 8) + 5):
+      fdct->do_dct[ci] = jpeg_fdct_10x5;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((8 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_8x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 3):
+      fdct->do_dct[ci] = jpeg_fdct_6x3;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_4x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 1):
+      fdct->do_dct[ci] = jpeg_fdct_2x1;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((8 << 8) + 16):
+      fdct->do_dct[ci] = jpeg_fdct_8x16;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((7 << 8) + 14):
+      fdct->do_dct[ci] = jpeg_fdct_7x14;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((6 << 8) + 12):
+      fdct->do_dct[ci] = jpeg_fdct_6x12;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((5 << 8) + 10):
+      fdct->do_dct[ci] = jpeg_fdct_5x10;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((4 << 8) + 8):
+      fdct->do_dct[ci] = jpeg_fdct_4x8;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((3 << 8) + 6):
+      fdct->do_dct[ci] = jpeg_fdct_3x6;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((2 << 8) + 4):
+      fdct->do_dct[ci] = jpeg_fdct_2x4;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+    case ((1 << 8) + 2):
+      fdct->do_dct[ci] = jpeg_fdct_1x2;
+      method = JDCT_ISLOW;	/* jfdctint uses islow-style table */
+      break;
+#endif
+    case ((DCTSIZE << 8) + DCTSIZE):
+      switch (cinfo->dct_method) {
+#ifdef DCT_ISLOW_SUPPORTED
+      case JDCT_ISLOW:
+	fdct->do_dct[ci] = jpeg_fdct_islow;
+	method = JDCT_ISLOW;
+	break;
+#endif
+#ifdef DCT_IFAST_SUPPORTED
+      case JDCT_IFAST:
+	fdct->do_dct[ci] = jpeg_fdct_ifast;
+	method = JDCT_IFAST;
+	break;
+#endif
+#ifdef DCT_FLOAT_SUPPORTED
+      case JDCT_FLOAT:
+	fdct->do_float_dct[ci] = jpeg_fdct_float;
+	method = JDCT_FLOAT;
+	break;
+#endif
+      default:
+	ERREXIT(cinfo, JERR_NOT_COMPILED);
+	break;
+      }
+      break;
+    default:
+      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
+      break;
+    }
     qtblno = compptr->quant_tbl_no;
     /* Make sure specified quantization table is present */
     if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS ||
 	cinfo->quant_tbl_ptrs[qtblno] == NULL)
       ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno);
     qtbl = cinfo->quant_tbl_ptrs[qtblno];
-    /* Compute divisors for this quant table */
-    /* We may do this more than once for same table, but it's not a big deal */
-    switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
+    /* Create divisor table from quant table */
+    switch (method) {
+#ifdef PROVIDE_ISLOW_TABLES
     case JDCT_ISLOW:
       /* For LL&M IDCT method, divisors are equal to raw quantization
        * coefficients multiplied by 8 (to counteract scaling).
        */
-      if (fdct->divisors[qtblno] == NULL) {
-	fdct->divisors[qtblno] = (DCTELEM *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      (DCTSIZE2 * 4) * SIZEOF(DCTELEM));
-      }
-      dtbl = fdct->divisors[qtblno];
+      dtbl = (DCTELEM *) compptr->dct_table;
       for (i = 0; i < DCTSIZE2; i++) {
-	compute_reciprocal(qtbl->quantval[i] << 3, &dtbl[i]);
+	dtbl[i] =
+	  ((DCTELEM) qtbl->quantval[i]) << (compptr->component_needed ? 4 : 3);
       }
+      fdct->pub.forward_DCT[ci] = forward_DCT;
       break;
 #endif
 #ifdef DCT_IFAST_SUPPORTED
@@ -259,19 +399,15 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 	};
 	SHIFT_TEMPS
 
-	if (fdct->divisors[qtblno] == NULL) {
-	  fdct->divisors[qtblno] = (DCTELEM *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					(DCTSIZE2 * 4) * SIZEOF(DCTELEM));
-	}
-	dtbl = fdct->divisors[qtblno];
+	dtbl = (DCTELEM *) compptr->dct_table;
 	for (i = 0; i < DCTSIZE2; i++) {
-	  compute_reciprocal(
+	  dtbl[i] = (DCTELEM)
 	    DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i],
 				  (INT32) aanscales[i]),
-		    CONST_BITS-3), &dtbl[i]);
+		    compptr->component_needed ? CONST_BITS-4 : CONST_BITS-3);
 	}
       }
+      fdct->pub.forward_DCT[ci] = forward_DCT;
       break;
 #endif
 #ifdef DCT_FLOAT_SUPPORTED
@@ -285,29 +421,25 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 	 * What's actually stored is 1/divisor so that the inner loop can
 	 * use a multiplication rather than a division.
 	 */
-	FAST_FLOAT * fdtbl;
+	FAST_FLOAT * fdtbl = (FAST_FLOAT *) compptr->dct_table;
 	int row, col;
 	static const double aanscalefactor[DCTSIZE] = {
 	  1.0, 1.387039845, 1.306562965, 1.175875602,
 	  1.0, 0.785694958, 0.541196100, 0.275899379
 	};
 
-	if (fdct->float_divisors[qtblno] == NULL) {
-	  fdct->float_divisors[qtblno] = (FAST_FLOAT *)
-	    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-					DCTSIZE2 * SIZEOF(FAST_FLOAT));
-	}
-	fdtbl = fdct->float_divisors[qtblno];
 	i = 0;
 	for (row = 0; row < DCTSIZE; row++) {
 	  for (col = 0; col < DCTSIZE; col++) {
 	    fdtbl[i] = (FAST_FLOAT)
-	      (1.0 / (((double) qtbl->quantval[i] *
-		       aanscalefactor[row] * aanscalefactor[col] * 8.0)));
+	      (1.0 / ((double) qtbl->quantval[i] *
+		      aanscalefactor[row] * aanscalefactor[col] *
+		      (compptr->component_needed ? 16.0 : 8.0)));
 	    i++;
 	  }
 	}
       }
+      fdct->pub.forward_DCT[ci] = forward_DCT_float;
       break;
 #endif
     default:
@@ -318,212 +450,6 @@ start_pass_fdctmgr (j_compress_ptr cinfo)
 }
 
 
-/*
- * Load data into workspace, applying unsigned->signed conversion.
- */
-
-METHODDEF(void)
-convsamp (JSAMPARRAY sample_data, JDIMENSION start_col, DCTELEM * workspace)
-{
-  register DCTELEM *workspaceptr;
-  register JSAMPROW elemptr;
-  register int elemr;
-
-  workspaceptr = workspace;
-  for (elemr = 0; elemr < DCTSIZE; elemr++) {
-    elemptr = sample_data[elemr] + start_col;
-
-#if DCTSIZE == 8		/* unroll the inner loop */
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-#else
-    {
-      register int elemc;
-      for (elemc = DCTSIZE; elemc > 0; elemc--)
-        *workspaceptr++ = GETJSAMPLE(*elemptr++) - CENTERJSAMPLE;
-    }
-#endif
-  }
-}
-
-
-/*
- * Quantize/descale the coefficients, and store into coef_blocks[].
- */
-
-METHODDEF(void)
-quantize (JCOEFPTR coef_block, DCTELEM * divisors, DCTELEM * workspace)
-{
-  int i;
-  DCTELEM temp;
-  UDCTELEM recip, corr, shift;
-  UDCTELEM2 product;
-  JCOEFPTR output_ptr = coef_block;
-
-  for (i = 0; i < DCTSIZE2; i++) {
-    temp = workspace[i];
-    recip = divisors[i + DCTSIZE2 * 0];
-    corr =  divisors[i + DCTSIZE2 * 1];
-    shift = divisors[i + DCTSIZE2 * 3];
-
-    if (temp < 0) {
-      temp = -temp;
-      product = (UDCTELEM2)(temp + corr) * recip;
-      product >>= shift + sizeof(DCTELEM)*8;
-      temp = product;
-      temp = -temp;
-    } else {
-      product = (UDCTELEM2)(temp + corr) * recip;
-      product >>= shift + sizeof(DCTELEM)*8;
-      temp = product;
-    }
-
-    output_ptr[i] = (JCOEF) temp;
-  }
-}
-
-
-/*
- * Perform forward DCT on one or more blocks of a component.
- *
- * The input samples are taken from the sample_data[] array starting at
- * position start_row/start_col, and moving to the right for any additional
- * blocks. The quantized coefficients are returned in coef_blocks[].
- */
-
-METHODDEF(void)
-forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr,
-	     JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
-	     JDIMENSION start_row, JDIMENSION start_col,
-	     JDIMENSION num_blocks)
-/* This version is used for integer DCT implementations. */
-{
-  /* This routine is heavily used, so it's worth coding it tightly. */
-  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no];
-  DCTELEM * workspace;
-  JDIMENSION bi;
-
-  /* Make sure the compiler doesn't look up these every pass */
-  forward_DCT_method_ptr do_dct = fdct->dct;
-  convsamp_method_ptr do_convsamp = fdct->convsamp;
-  quantize_method_ptr do_quantize = fdct->quantize;
-  workspace = fdct->workspace;
-
-  sample_data += start_row;	/* fold in the vertical offset once */
-
-  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
-    /* Load data into workspace, applying unsigned->signed conversion */
-    (*do_convsamp) (sample_data, start_col, workspace);
-
-    /* Perform the DCT */
-    (*do_dct) (workspace);
-
-    /* Quantize/descale the coefficients, and store into coef_blocks[] */
-    (*do_quantize) (coef_blocks[bi], divisors, workspace);
-  }
-}
-
-
-#ifdef DCT_FLOAT_SUPPORTED
-
-
-METHODDEF(void)
-convsamp_float (JSAMPARRAY sample_data, JDIMENSION start_col, FAST_FLOAT * workspace)
-{
-  register FAST_FLOAT *workspaceptr;
-  register JSAMPROW elemptr;
-  register int elemr;
-
-  workspaceptr = workspace;
-  for (elemr = 0; elemr < DCTSIZE; elemr++) {
-    elemptr = sample_data[elemr] + start_col;
-#if DCTSIZE == 8		/* unroll the inner loop */
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    *workspaceptr++ = (FAST_FLOAT)(GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-#else
-    {
-      register int elemc;
-      for (elemc = DCTSIZE; elemc > 0; elemc--)
-        *workspaceptr++ = (FAST_FLOAT)
-                          (GETJSAMPLE(*elemptr++) - CENTERJSAMPLE);
-    }
-#endif
-  }
-}
-
-
-METHODDEF(void)
-quantize_float (JCOEFPTR coef_block, FAST_FLOAT * divisors, FAST_FLOAT * workspace)
-{
-  register FAST_FLOAT temp;
-  register int i;
-  register JCOEFPTR output_ptr = coef_block;
-
-  for (i = 0; i < DCTSIZE2; i++) {
-    /* Apply the quantization and scaling factor */
-    temp = workspace[i] * divisors[i];
-
-    /* Round to nearest integer.
-     * Since C does not specify the direction of rounding for negative
-     * quotients, we have to force the dividend positive for portability.
-     * The maximum coefficient size is +-16K (for 12-bit data), so this
-     * code should work for either 16-bit or 32-bit ints.
-     */
-    output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384);
-  }
-}
-
-
-METHODDEF(void)
-forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr,
-		   JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
-		   JDIMENSION start_row, JDIMENSION start_col,
-		   JDIMENSION num_blocks)
-/* This version is used for floating-point DCT implementations. */
-{
-  /* This routine is heavily used, so it's worth coding it tightly. */
-  my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct;
-  FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no];
-  FAST_FLOAT * workspace;
-  JDIMENSION bi;
-
-
-  /* Make sure the compiler doesn't look up these every pass */
-  float_DCT_method_ptr do_dct = fdct->float_dct;
-  float_convsamp_method_ptr do_convsamp = fdct->float_convsamp;
-  float_quantize_method_ptr do_quantize = fdct->float_quantize;
-  workspace = fdct->float_workspace;
-
-  sample_data += start_row;	/* fold in the vertical offset once */
-
-  for (bi = 0; bi < num_blocks; bi++, start_col += DCTSIZE) {
-    /* Load data into workspace, applying unsigned->signed conversion */
-    (*do_convsamp) (sample_data, start_col, workspace);
-
-    /* Perform the DCT */
-    (*do_dct) (workspace);
-
-    /* Quantize/descale the coefficients, and store into coef_blocks[] */
-    (*do_quantize) (coef_blocks[bi], divisors, workspace);
-  }
-}
-
-#endif /* DCT_FLOAT_SUPPORTED */
-
-
 /*
  * Initialize FDCT manager.
  */
@@ -532,101 +458,20 @@ GLOBAL(void)
 jinit_forward_dct (j_compress_ptr cinfo)
 {
   my_fdct_ptr fdct;
-  int i;
+  int ci;
+  jpeg_component_info *compptr;
 
   fdct = (my_fdct_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_fdct_controller));
-  cinfo->fdct = (struct jpeg_forward_dct *) fdct;
+  cinfo->fdct = &fdct->pub;
   fdct->pub.start_pass = start_pass_fdctmgr;
 
-  /* First determine the DCT... */
-  switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
-  case JDCT_ISLOW:
-    fdct->pub.forward_DCT = forward_DCT;
-    if (jsimd_can_fdct_islow())
-      fdct->dct = jsimd_fdct_islow;
-    else
-      fdct->dct = jpeg_fdct_islow;
-    break;
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-  case JDCT_IFAST:
-    fdct->pub.forward_DCT = forward_DCT;
-    if (jsimd_can_fdct_ifast())
-      fdct->dct = jsimd_fdct_ifast;
-    else
-      fdct->dct = jpeg_fdct_ifast;
-    break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-  case JDCT_FLOAT:
-    fdct->pub.forward_DCT = forward_DCT_float;
-    if (jsimd_can_fdct_float())
-      fdct->float_dct = jsimd_fdct_float;
-    else
-      fdct->float_dct = jpeg_fdct_float;
-    break;
-#endif
-  default:
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-    break;
-  }
-
-  /* ...then the supporting stages. */
-  switch (cinfo->dct_method) {
-#ifdef DCT_ISLOW_SUPPORTED
-  case JDCT_ISLOW:
-#endif
-#ifdef DCT_IFAST_SUPPORTED
-  case JDCT_IFAST:
-#endif
-#if defined(DCT_ISLOW_SUPPORTED) || defined(DCT_IFAST_SUPPORTED)
-    if (jsimd_can_convsamp())
-      fdct->convsamp = jsimd_convsamp;
-    else
-      fdct->convsamp = convsamp;
-    if (jsimd_can_quantize())
-      fdct->quantize = jsimd_quantize;
-    else
-      fdct->quantize = quantize;
-    break;
-#endif
-#ifdef DCT_FLOAT_SUPPORTED
-  case JDCT_FLOAT:
-    if (jsimd_can_convsamp_float())
-      fdct->float_convsamp = jsimd_convsamp_float;
-    else
-      fdct->float_convsamp = convsamp_float;
-    if (jsimd_can_quantize_float())
-      fdct->float_quantize = jsimd_quantize_float;
-    else
-      fdct->float_quantize = quantize_float;
-    break;
-#endif
-  default:
-    ERREXIT(cinfo, JERR_NOT_COMPILED);
-    break;
-  }
-
-  /* Allocate workspace memory */
-#ifdef DCT_FLOAT_SUPPORTED
-  if (cinfo->dct_method == JDCT_FLOAT)
-    fdct->float_workspace = (FAST_FLOAT *)
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    /* Allocate a divisor table for each component */
+    compptr->dct_table =
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(FAST_FLOAT) * DCTSIZE2);
-  else
-#endif
-    fdct->workspace = (DCTELEM *)
-      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				  SIZEOF(DCTELEM) * DCTSIZE2);
-
-  /* Mark divisor tables unallocated */
-  for (i = 0; i < NUM_QUANT_TBLS; i++) {
-    fdct->divisors[i] = NULL;
-#ifdef DCT_FLOAT_SUPPORTED
-    fdct->float_divisors[i] = NULL;
-#endif
+				  SIZEOF(divisor_table));
   }
 }

jchuff.h

@@ -1,47 +0,0 @@
-/*
- * jchuff.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy encoding routines
- * that are shared between the sequential encoder (jchuff.c) and the
- * progressive encoder (jcphuff.c).  No other modules need to see these.
- */
-
-/* The legal range of a DCT coefficient is
- *  -1024 .. +1023  for 8-bit data;
- * -16384 .. +16383 for 12-bit data.
- * Hence the magnitude should always fit in 10 or 14 bits respectively.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MAX_COEF_BITS 10
-#else
-#define MAX_COEF_BITS 14
-#endif
-
-/* Derived data constructed for each Huffman table */
-
-typedef struct {
-  unsigned int ehufco[256];	/* code for each symbol */
-  char ehufsi[256];		/* length of code for each symbol */
-  /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */
-} c_derived_tbl;
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_c_derived_tbl	jMkCDerived
-#define jpeg_gen_optimal_table	jGenOptTbl
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_c_derived_tbl
-	JPP((j_compress_ptr cinfo, boolean isDC, int tblno,
-	     c_derived_tbl ** pdtbl));
-
-/* Generate an optimal table definition given the specified counts */
-EXTERN(void) jpeg_gen_optimal_table
-	JPP((j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]));

jcinit.c

@@ -2,6 +2,7 @@
  * jcinit.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -20,6 +21,168 @@
 #include "jpeglib.h"
 
 
+/*
+ * Compute JPEG image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+  /* Sanity check on input image dimensions to prevent overflow in
+   * following calculations.
+   * We do check jpeg_width and jpeg_height in initial_setup in jcmaster.c,
+   * but image_width and image_height can come from arbitrary data,
+   * and we need some space for multiplication by block_size.
+   */
+  if (((long) cinfo->image_width >> 24) || ((long) cinfo->image_height >> 24))
+    ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
+
+#ifdef DCT_SCALING_SUPPORTED
+
+  /* Compute actual JPEG image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/1 scaling */
+    cinfo->jpeg_width = cinfo->image_width * cinfo->block_size;
+    cinfo->jpeg_height = cinfo->image_height * cinfo->block_size;
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num * 2 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/2 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 2L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 2L);
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/3 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 3L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 3L);
+    cinfo->min_DCT_h_scaled_size = 3;
+    cinfo->min_DCT_v_scaled_size = 3;
+  } else if (cinfo->scale_num * 4 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/4 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 4L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 4L);
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/5 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 5L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 5L);
+    cinfo->min_DCT_h_scaled_size = 5;
+    cinfo->min_DCT_v_scaled_size = 5;
+  } else if (cinfo->scale_num * 6 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/6 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 6L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 6L);
+    cinfo->min_DCT_h_scaled_size = 6;
+    cinfo->min_DCT_v_scaled_size = 6;
+  } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/7 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 7L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 7L);
+    cinfo->min_DCT_h_scaled_size = 7;
+    cinfo->min_DCT_v_scaled_size = 7;
+  } else if (cinfo->scale_num * 8 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/8 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 8L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 8L);
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/9 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 9L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 9L);
+    cinfo->min_DCT_h_scaled_size = 9;
+    cinfo->min_DCT_v_scaled_size = 9;
+  } else if (cinfo->scale_num * 10 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/10 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 10L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 10L);
+    cinfo->min_DCT_h_scaled_size = 10;
+    cinfo->min_DCT_v_scaled_size = 10;
+  } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/11 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 11L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 11L);
+    cinfo->min_DCT_h_scaled_size = 11;
+    cinfo->min_DCT_v_scaled_size = 11;
+  } else if (cinfo->scale_num * 12 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/12 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 12L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 12L);
+    cinfo->min_DCT_h_scaled_size = 12;
+    cinfo->min_DCT_v_scaled_size = 12;
+  } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/13 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 13L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 13L);
+    cinfo->min_DCT_h_scaled_size = 13;
+    cinfo->min_DCT_v_scaled_size = 13;
+  } else if (cinfo->scale_num * 14 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/14 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 14L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 14L);
+    cinfo->min_DCT_h_scaled_size = 14;
+    cinfo->min_DCT_v_scaled_size = 14;
+  } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * cinfo->block_size) {
+    /* Provide block_size/15 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 15L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 15L);
+    cinfo->min_DCT_h_scaled_size = 15;
+    cinfo->min_DCT_v_scaled_size = 15;
+  } else {
+    /* Provide block_size/16 scaling */
+    cinfo->jpeg_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * cinfo->block_size, 16L);
+    cinfo->jpeg_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * cinfo->block_size, 16L);
+    cinfo->min_DCT_h_scaled_size = 16;
+    cinfo->min_DCT_v_scaled_size = 16;
+  }
+
+#else /* !DCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->jpeg_width = cinfo->image_width;
+  cinfo->jpeg_height = cinfo->image_height;
+  cinfo->min_DCT_h_scaled_size = DCTSIZE;
+  cinfo->min_DCT_v_scaled_size = DCTSIZE;
+
+#endif /* DCT_SCALING_SUPPORTED */
+}
+
+
 /*
  * Master selection of compression modules.
  * This is done once at the start of processing an image.  We determine
@@ -29,6 +192,27 @@
 GLOBAL(void)
 jinit_compress_master (j_compress_ptr cinfo)
 {
+  long samplesperrow;
+  JDIMENSION jd_samplesperrow;
+
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
+  /* Sanity check on input image dimensions */
+  if (cinfo->image_height <= 0 || cinfo->image_width <= 0 ||
+      cinfo->input_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
+  /* Width of an input scanline must be representable as JDIMENSION. */
+  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
+  jd_samplesperrow = (JDIMENSION) samplesperrow;
+  if ((long) jd_samplesperrow != samplesperrow)
+    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
+
+  /* Compute JPEG image dimensions and related values. */
+  jpeg_calc_jpeg_dimensions(cinfo);
+
   /* Initialize master control (includes parameter checking/processing) */
   jinit_c_master_control(cinfo, FALSE /* full compression */);
 
@@ -41,17 +225,10 @@ jinit_compress_master (j_compress_ptr cinfo)
   /* Forward DCT */
   jinit_forward_dct(cinfo);
   /* Entropy encoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-      jinit_phuff_encoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
-      jinit_huff_encoder(cinfo);
+  if (cinfo->arith_code)
+    jinit_arith_encoder(cinfo);
+  else {
+    jinit_huff_encoder(cinfo);
   }
 
   /* Need a full-image coefficient buffer in any multi-pass mode. */

jcmainct.c

@@ -2,6 +2,7 @@
  * jcmainct.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -68,32 +69,32 @@ METHODDEF(void) process_data_buffer_main
 METHODDEF(void)
 start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
   /* Do nothing in raw-data mode. */
   if (cinfo->raw_data_in)
     return;
 
-  main->cur_iMCU_row = 0;	/* initialize counters */
-  main->rowgroup_ctr = 0;
-  main->suspended = FALSE;
-  main->pass_mode = pass_mode;	/* save mode for use by process_data */
+  mainp->cur_iMCU_row = 0;	/* initialize counters */
+  mainp->rowgroup_ctr = 0;
+  mainp->suspended = FALSE;
+  mainp->pass_mode = pass_mode;	/* save mode for use by process_data */
 
   switch (pass_mode) {
   case JBUF_PASS_THRU:
 #ifdef FULL_MAIN_BUFFER_SUPPORTED
-    if (main->whole_image[0] != NULL)
+    if (mainp->whole_image[0] != NULL)
       ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
 #endif
-    main->pub.process_data = process_data_simple_main;
+    mainp->pub.process_data = process_data_simple_main;
     break;
 #ifdef FULL_MAIN_BUFFER_SUPPORTED
   case JBUF_SAVE_SOURCE:
   case JBUF_CRANK_DEST:
   case JBUF_SAVE_AND_PASS:
-    if (main->whole_image[0] == NULL)
+    if (mainp->whole_image[0] == NULL)
       ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
-    main->pub.process_data = process_data_buffer_main;
+    mainp->pub.process_data = process_data_buffer_main;
     break;
 #endif
   default:
@@ -114,46 +115,46 @@ process_data_simple_main (j_compress_ptr cinfo,
 			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
 			  JDIMENSION in_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
-  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+  while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) {
     /* Read input data if we haven't filled the main buffer yet */
-    if (main->rowgroup_ctr < DCTSIZE)
+    if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size)
       (*cinfo->prep->pre_process_data) (cinfo,
 					input_buf, in_row_ctr, in_rows_avail,
-					main->buffer, &main->rowgroup_ctr,
-					(JDIMENSION) DCTSIZE);
+					mainp->buffer, &mainp->rowgroup_ctr,
+					(JDIMENSION) cinfo->min_DCT_v_scaled_size);
 
     /* If we don't have a full iMCU row buffered, return to application for
      * more data.  Note that preprocessor will always pad to fill the iMCU row
      * at the bottom of the image.
      */
-    if (main->rowgroup_ctr != DCTSIZE)
+    if (mainp->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size)
       return;
 
     /* Send the completed row to the compressor */
-    if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+    if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) {
       /* If compressor did not consume the whole row, then we must need to
        * suspend processing and return to the application.  In this situation
        * we pretend we didn't yet consume the last input row; otherwise, if
        * it happened to be the last row of the image, the application would
        * think we were done.
        */
-      if (! main->suspended) {
+      if (! mainp->suspended) {
 	(*in_row_ctr)--;
-	main->suspended = TRUE;
+	mainp->suspended = TRUE;
       }
       return;
     }
     /* We did finish the row.  Undo our little suspension hack if a previous
      * call suspended; then mark the main buffer empty.
      */
-    if (main->suspended) {
+    if (mainp->suspended) {
       (*in_row_ctr)++;
-      main->suspended = FALSE;
+      mainp->suspended = FALSE;
     }
-    main->rowgroup_ctr = 0;
-    main->cur_iMCU_row++;
+    mainp->rowgroup_ctr = 0;
+    mainp->cur_iMCU_row++;
   }
 }
 
@@ -170,25 +171,27 @@ process_data_buffer_main (j_compress_ptr cinfo,
 			  JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
 			  JDIMENSION in_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci;
   jpeg_component_info *compptr;
-  boolean writing = (main->pass_mode != JBUF_CRANK_DEST);
+  boolean writing = (mainp->pass_mode != JBUF_CRANK_DEST);
 
-  while (main->cur_iMCU_row < cinfo->total_iMCU_rows) {
+  while (mainp->cur_iMCU_row < cinfo->total_iMCU_rows) {
     /* Realign the virtual buffers if at the start of an iMCU row. */
-    if (main->rowgroup_ctr == 0) {
+    if (mainp->rowgroup_ctr == 0) {
       for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	   ci++, compptr++) {
-	main->buffer[ci] = (*cinfo->mem->access_virt_sarray)
-	  ((j_common_ptr) cinfo, main->whole_image[ci],
-	   main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE),
-	   (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing);
+	mainp->buffer[ci] = (*cinfo->mem->access_virt_sarray)
+	  ((j_common_ptr) cinfo, mainp->whole_image[ci], mainp->cur_iMCU_row *
+	   ((JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size)),
+	   (JDIMENSION) (compptr->v_samp_factor * cinfo->min_DCT_v_scaled_size),
+	   writing);
       }
       /* In a read pass, pretend we just read some source data. */
       if (! writing) {
-	*in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE;
-	main->rowgroup_ctr = DCTSIZE;
+	*in_row_ctr += (JDIMENSION)
+	  (cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size);
+	mainp->rowgroup_ctr = (JDIMENSION) cinfo->min_DCT_v_scaled_size;
       }
     }
 
@@ -197,40 +200,40 @@ process_data_buffer_main (j_compress_ptr cinfo,
     if (writing) {
       (*cinfo->prep->pre_process_data) (cinfo,
 					input_buf, in_row_ctr, in_rows_avail,
-					main->buffer, &main->rowgroup_ctr,
-					(JDIMENSION) DCTSIZE);
+					mainp->buffer, &mainp->rowgroup_ctr,
+					(JDIMENSION) cinfo->min_DCT_v_scaled_size);
       /* Return to application if we need more data to fill the iMCU row. */
-      if (main->rowgroup_ctr < DCTSIZE)
+      if (mainp->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size)
 	return;
     }
 
     /* Emit data, unless this is a sink-only pass. */
-    if (main->pass_mode != JBUF_SAVE_SOURCE) {
-      if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) {
+    if (mainp->pass_mode != JBUF_SAVE_SOURCE) {
+      if (! (*cinfo->coef->compress_data) (cinfo, mainp->buffer)) {
 	/* If compressor did not consume the whole row, then we must need to
 	 * suspend processing and return to the application.  In this situation
 	 * we pretend we didn't yet consume the last input row; otherwise, if
 	 * it happened to be the last row of the image, the application would
 	 * think we were done.
 	 */
-	if (! main->suspended) {
+	if (! mainp->suspended) {
 	  (*in_row_ctr)--;
-	  main->suspended = TRUE;
+	  mainp->suspended = TRUE;
 	}
 	return;
       }
       /* We did finish the row.  Undo our little suspension hack if a previous
        * call suspended; then mark the main buffer empty.
        */
-      if (main->suspended) {
+      if (mainp->suspended) {
 	(*in_row_ctr)++;
-	main->suspended = FALSE;
+	mainp->suspended = FALSE;
       }
     }
 
     /* If get here, we are done with this iMCU row.  Mark buffer empty. */
-    main->rowgroup_ctr = 0;
-    main->cur_iMCU_row++;
+    mainp->rowgroup_ctr = 0;
+    mainp->cur_iMCU_row++;
   }
 }
 
@@ -244,15 +247,15 @@ process_data_buffer_main (j_compress_ptr cinfo,
 GLOBAL(void)
 jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
 {
-  my_main_ptr main;
+  my_main_ptr mainp;
   int ci;
   jpeg_component_info *compptr;
 
-  main = (my_main_ptr)
+  mainp = (my_main_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_main_controller));
-  cinfo->main = (struct jpeg_c_main_controller *) main;
-  main->pub.start_pass = start_pass_main;
+  cinfo->main = &mainp->pub;
+  mainp->pub.start_pass = start_pass_main;
 
   /* We don't need to create a buffer in raw-data mode. */
   if (cinfo->raw_data_in)
@@ -267,27 +270,28 @@ jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer)
     /* Note we pad the bottom to a multiple of the iMCU height */
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	 ci++, compptr++) {
-      main->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
+      mainp->whole_image[ci] = (*cinfo->mem->request_virt_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE,
-	 compptr->width_in_blocks * DCTSIZE,
-	 (JDIMENSION) jround_up((long) compptr->height_in_blocks,
-				(long) compptr->v_samp_factor) * DCTSIZE,
-	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+	 compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size),
+	 ((JDIMENSION) jround_up((long) compptr->height_in_blocks,
+				 (long) compptr->v_samp_factor)) *
+	 ((JDIMENSION) cinfo->min_DCT_v_scaled_size),
+	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
     }
 #else
     ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
 #endif
   } else {
 #ifdef FULL_MAIN_BUFFER_SUPPORTED
-    main->whole_image[0] = NULL; /* flag for no virtual arrays */
+    mainp->whole_image[0] = NULL; /* flag for no virtual arrays */
 #endif
     /* Allocate a strip buffer for each component */
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	 ci++, compptr++) {
-      main->buffer[ci] = (*cinfo->mem->alloc_sarray)
+      mainp->buffer[ci] = (*cinfo->mem->alloc_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 compptr->width_in_blocks * DCTSIZE,
-	 (JDIMENSION) (compptr->v_samp_factor * DCTSIZE));
+	 compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size),
+	 (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size));
     }
   }
 }

jcmarker.c

@@ -2,6 +2,7 @@
  * jcmarker.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -18,24 +19,24 @@ typedef enum {			/* JPEG marker codes */
   M_SOF1  = 0xc1,
   M_SOF2  = 0xc2,
   M_SOF3  = 0xc3,
-  
+
   M_SOF5  = 0xc5,
   M_SOF6  = 0xc6,
   M_SOF7  = 0xc7,
-  
+
   M_JPG   = 0xc8,
   M_SOF9  = 0xc9,
   M_SOF10 = 0xca,
   M_SOF11 = 0xcb,
-  
+
   M_SOF13 = 0xcd,
   M_SOF14 = 0xce,
   M_SOF15 = 0xcf,
-  
+
   M_DHT   = 0xc4,
-  
+
   M_DAC   = 0xcc,
-  
+
   M_RST0  = 0xd0,
   M_RST1  = 0xd1,
   M_RST2  = 0xd2,
@@ -44,7 +45,7 @@ typedef enum {			/* JPEG marker codes */
   M_RST5  = 0xd5,
   M_RST6  = 0xd6,
   M_RST7  = 0xd7,
-  
+
   M_SOI   = 0xd8,
   M_EOI   = 0xd9,
   M_SOS   = 0xda,
@@ -53,7 +54,7 @@ typedef enum {			/* JPEG marker codes */
   M_DRI   = 0xdd,
   M_DHP   = 0xde,
   M_EXP   = 0xdf,
-  
+
   M_APP0  = 0xe0,
   M_APP1  = 0xe1,
   M_APP2  = 0xe2,
@@ -70,13 +71,14 @@ typedef enum {			/* JPEG marker codes */
   M_APP13 = 0xed,
   M_APP14 = 0xee,
   M_APP15 = 0xef,
-  
+
   M_JPG0  = 0xf0,
+  M_JPG8  = 0xf8,
   M_JPG13 = 0xfd,
   M_COM   = 0xfe,
-  
+
   M_TEM   = 0x01,
-  
+
   M_ERROR = 0x100
 } JPEG_MARKER;
 
@@ -153,21 +155,22 @@ emit_dqt (j_compress_ptr cinfo, int index)
     ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index);
 
   prec = 0;
-  for (i = 0; i < DCTSIZE2; i++) {
-    if (qtbl->quantval[i] > 255)
+  for (i = 0; i <= cinfo->lim_Se; i++) {
+    if (qtbl->quantval[cinfo->natural_order[i]] > 255)
       prec = 1;
   }
 
   if (! qtbl->sent_table) {
     emit_marker(cinfo, M_DQT);
 
-    emit_2bytes(cinfo, prec ? DCTSIZE2*2 + 1 + 2 : DCTSIZE2 + 1 + 2);
+    emit_2bytes(cinfo,
+      prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2);
 
     emit_byte(cinfo, index + (prec<<4));
 
-    for (i = 0; i < DCTSIZE2; i++) {
+    for (i = 0; i <= cinfo->lim_Se; i++) {
       /* The table entries must be emitted in zigzag order. */
-      unsigned int qval = qtbl->quantval[jpeg_natural_order[i]];
+      unsigned int qval = qtbl->quantval[cinfo->natural_order[i]];
       if (prec)
 	emit_byte(cinfo, (int) (qval >> 8));
       emit_byte(cinfo, (int) (qval & 0xFF));
@@ -229,32 +232,38 @@ emit_dac (j_compress_ptr cinfo)
   char ac_in_use[NUM_ARITH_TBLS];
   int length, i;
   jpeg_component_info *compptr;
-  
+
   for (i = 0; i < NUM_ARITH_TBLS; i++)
     dc_in_use[i] = ac_in_use[i] = 0;
-  
+
   for (i = 0; i < cinfo->comps_in_scan; i++) {
     compptr = cinfo->cur_comp_info[i];
-    dc_in_use[compptr->dc_tbl_no] = 1;
-    ac_in_use[compptr->ac_tbl_no] = 1;
+    /* DC needs no table for refinement scan */
+    if (cinfo->Ss == 0 && cinfo->Ah == 0)
+      dc_in_use[compptr->dc_tbl_no] = 1;
+    /* AC needs no table when not present */
+    if (cinfo->Se)
+      ac_in_use[compptr->ac_tbl_no] = 1;
   }
-  
+
   length = 0;
   for (i = 0; i < NUM_ARITH_TBLS; i++)
     length += dc_in_use[i] + ac_in_use[i];
-  
-  emit_marker(cinfo, M_DAC);
-  
-  emit_2bytes(cinfo, length*2 + 2);
-  
-  for (i = 0; i < NUM_ARITH_TBLS; i++) {
-    if (dc_in_use[i]) {
-      emit_byte(cinfo, i);
-      emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4));
-    }
-    if (ac_in_use[i]) {
-      emit_byte(cinfo, i + 0x10);
-      emit_byte(cinfo, cinfo->arith_ac_K[i]);
+
+  if (length) {
+    emit_marker(cinfo, M_DAC);
+
+    emit_2bytes(cinfo, length*2 + 2);
+
+    for (i = 0; i < NUM_ARITH_TBLS; i++) {
+      if (dc_in_use[i]) {
+	emit_byte(cinfo, i);
+	emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4));
+      }
+      if (ac_in_use[i]) {
+	emit_byte(cinfo, i + 0x10);
+	emit_byte(cinfo, cinfo->arith_ac_K[i]);
+      }
     }
   }
 #endif /* C_ARITH_CODING_SUPPORTED */
@@ -273,6 +282,37 @@ emit_dri (j_compress_ptr cinfo)
 }
 
 
+LOCAL(void)
+emit_lse_ict (j_compress_ptr cinfo)
+/* Emit an LSE inverse color transform specification marker */
+{
+  /* Support only 1 transform */
+  if (cinfo->color_transform != JCT_SUBTRACT_GREEN ||
+      cinfo->num_components < 3)
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+
+  emit_marker(cinfo, M_JPG8);
+  
+  emit_2bytes(cinfo, 24);	/* fixed length */
+
+  emit_byte(cinfo, 0x0D);	/* ID inverse transform specification */
+  emit_2bytes(cinfo, MAXJSAMPLE);	/* MAXTRANS */
+  emit_byte(cinfo, 3);		/* Nt=3 */
+  emit_byte(cinfo, cinfo->comp_info[1].component_id);
+  emit_byte(cinfo, cinfo->comp_info[0].component_id);
+  emit_byte(cinfo, cinfo->comp_info[2].component_id);
+  emit_byte(cinfo, 0x80);	/* F1: CENTER1=1, NORM1=0 */
+  emit_2bytes(cinfo, 0);	/* A(1,1)=0 */
+  emit_2bytes(cinfo, 0);	/* A(1,2)=0 */
+  emit_byte(cinfo, 0);		/* F2: CENTER2=0, NORM2=0 */
+  emit_2bytes(cinfo, 1);	/* A(2,1)=1 */
+  emit_2bytes(cinfo, 0);	/* A(2,2)=0 */
+  emit_byte(cinfo, 0);		/* F3: CENTER3=0, NORM3=0 */
+  emit_2bytes(cinfo, 1);	/* A(3,1)=1 */
+  emit_2bytes(cinfo, 0);	/* A(3,2)=0 */
+}
+
+
 LOCAL(void)
 emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
 /* Emit a SOF marker */
@@ -285,13 +325,13 @@ emit_sof (j_compress_ptr cinfo, JPEG_MARKER code)
   emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */
 
   /* Make sure image isn't bigger than SOF field can handle */
-  if ((long) cinfo->image_height > 65535L ||
-      (long) cinfo->image_width > 65535L)
+  if ((long) cinfo->jpeg_height > 65535L ||
+      (long) cinfo->jpeg_width > 65535L)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535);
 
   emit_byte(cinfo, cinfo->data_precision);
-  emit_2bytes(cinfo, (int) cinfo->image_height);
-  emit_2bytes(cinfo, (int) cinfo->image_width);
+  emit_2bytes(cinfo, (int) cinfo->jpeg_height);
+  emit_2bytes(cinfo, (int) cinfo->jpeg_width);
 
   emit_byte(cinfo, cinfo->num_components);
 
@@ -320,22 +360,16 @@ emit_sos (j_compress_ptr cinfo)
   for (i = 0; i < cinfo->comps_in_scan; i++) {
     compptr = cinfo->cur_comp_info[i];
     emit_byte(cinfo, compptr->component_id);
-    td = compptr->dc_tbl_no;
-    ta = compptr->ac_tbl_no;
-    if (cinfo->progressive_mode) {
-      /* Progressive mode: only DC or only AC tables are used in one scan;
-       * furthermore, Huffman coding of DC refinement uses no table at all.
-       * We emit 0 for unused field(s); this is recommended by the P&M text
-       * but does not seem to be specified in the standard.
-       */
-      if (cinfo->Ss == 0) {
-	ta = 0;			/* DC scan */
-	if (cinfo->Ah != 0 && !cinfo->arith_code)
-	  td = 0;		/* no DC table either */
-      } else {
-	td = 0;			/* AC scan */
-      }
-    }
+
+    /* We emit 0 for unused field(s); this is recommended by the P&M text
+     * but does not seem to be specified in the standard.
+     */
+
+    /* DC needs no table for refinement scan */
+    td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0;
+    /* AC needs no table when not present */
+    ta = cinfo->Se ? compptr->ac_tbl_no : 0;
+
     emit_byte(cinfo, (td << 4) + ta);
   }
 
@@ -345,6 +379,22 @@ emit_sos (j_compress_ptr cinfo)
 }
 
 
+LOCAL(void)
+emit_pseudo_sos (j_compress_ptr cinfo)
+/* Emit a pseudo SOS marker */
+{
+  emit_marker(cinfo, M_SOS);
+  
+  emit_2bytes(cinfo, 2 + 1 + 3); /* length */
+  
+  emit_byte(cinfo, 0); /* Ns */
+
+  emit_byte(cinfo, 0); /* Ss */
+  emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */
+  emit_byte(cinfo, 0); /* Ah/Al */
+}
+
+
 LOCAL(void)
 emit_jfif_app0 (j_compress_ptr cinfo)
 /* Emit a JFIF-compliant APP0 marker */
@@ -458,8 +508,8 @@ write_marker_byte (j_compress_ptr cinfo, int val)
  * Write datastream header.
  * This consists of an SOI and optional APPn markers.
  * We recommend use of the JFIF marker, but not the Adobe marker,
- * when using YCbCr or grayscale data.  The JFIF marker should NOT
- * be used for any other JPEG colorspace.  The Adobe marker is helpful
+ * when using YCbCr or grayscale data.  The JFIF marker is also used
+ * for other standard JPEG colorspaces.  The Adobe marker is helpful
  * to distinguish RGB, CMYK, and YCCK colorspaces.
  * Note that an application can write additional header markers after
  * jpeg_start_compress returns.
@@ -484,7 +534,8 @@ write_file_header (j_compress_ptr cinfo)
 
 /*
  * Write frame header.
- * This consists of DQT and SOFn markers.
+ * This consists of DQT and SOFn markers,
+ * a conditional LSE marker and a conditional pseudo SOS marker.
  * Note that we do not emit the SOF until we have emitted the DQT(s).
  * This avoids compatibility problems with incorrect implementations that
  * try to error-check the quant table numbers as soon as they see the SOF.
@@ -511,7 +562,7 @@ write_frame_header (j_compress_ptr cinfo)
    * Note we assume that Huffman table numbers won't be changed later.
    */
   if (cinfo->arith_code || cinfo->progressive_mode ||
-      cinfo->data_precision != 8) {
+      cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) {
     is_baseline = FALSE;
   } else {
     is_baseline = TRUE;
@@ -529,7 +580,10 @@ write_frame_header (j_compress_ptr cinfo)
 
   /* Emit the proper SOF marker */
   if (cinfo->arith_code) {
-    emit_sof(cinfo, M_SOF9);	/* SOF code for arithmetic coding */
+    if (cinfo->progressive_mode)
+      emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */
+    else
+      emit_sof(cinfo, M_SOF9);  /* SOF code for sequential arithmetic */
   } else {
     if (cinfo->progressive_mode)
       emit_sof(cinfo, M_SOF2);	/* SOF code for progressive Huffman */
@@ -538,6 +592,14 @@ write_frame_header (j_compress_ptr cinfo)
     else
       emit_sof(cinfo, M_SOF1);	/* SOF code for non-baseline Huffman file */
   }
+
+  /* Check to emit LSE inverse color transform specification marker */
+  if (cinfo->color_transform)
+    emit_lse_ict(cinfo);
+
+  /* Check to emit pseudo SOS marker */
+  if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE)
+    emit_pseudo_sos(cinfo);
 }
 
 
@@ -566,19 +628,12 @@ write_scan_header (j_compress_ptr cinfo)
      */
     for (i = 0; i < cinfo->comps_in_scan; i++) {
       compptr = cinfo->cur_comp_info[i];
-      if (cinfo->progressive_mode) {
-	/* Progressive mode: only DC or only AC tables are used in one scan */
-	if (cinfo->Ss == 0) {
-	  if (cinfo->Ah == 0)	/* DC needs no table for refinement scan */
-	    emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
-	} else {
-	  emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
-	}
-      } else {
-	/* Sequential mode: need both DC and AC tables */
+      /* DC needs no table for refinement scan */
+      if (cinfo->Ss == 0 && cinfo->Ah == 0)
 	emit_dht(cinfo, compptr->dc_tbl_no, FALSE);
+      /* AC needs no table when not present */
+      if (cinfo->Se)
 	emit_dht(cinfo, compptr->ac_tbl_no, TRUE);
-      }
     }
   }
 
@@ -650,7 +705,7 @@ jinit_marker_writer (j_compress_ptr cinfo)
   marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_marker_writer));
-  cinfo->marker = (struct jpeg_marker_writer *) marker;
+  cinfo->marker = &marker->pub;
   /* Initialize method pointers */
   marker->pub.write_file_header = write_file_header;
   marker->pub.write_frame_header = write_frame_header;

jcmaster.c

@@ -2,6 +2,7 @@
  * jcmaster.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -46,29 +47,40 @@ LOCAL(void)
 initial_setup (j_compress_ptr cinfo)
 /* Do computations that are needed before master selection phase */
 {
-  int ci;
+  int ci, ssize;
   jpeg_component_info *compptr;
-  long samplesperrow;
-  JDIMENSION jd_samplesperrow;
+
+  /* Sanity check on block_size */
+  if (cinfo->block_size < 1 || cinfo->block_size > 16)
+    ERREXIT2(cinfo, JERR_BAD_DCTSIZE, cinfo->block_size, cinfo->block_size);
+
+  /* Derive natural_order from block_size */
+  switch (cinfo->block_size) {
+  case 2: cinfo->natural_order = jpeg_natural_order2; break;
+  case 3: cinfo->natural_order = jpeg_natural_order3; break;
+  case 4: cinfo->natural_order = jpeg_natural_order4; break;
+  case 5: cinfo->natural_order = jpeg_natural_order5; break;
+  case 6: cinfo->natural_order = jpeg_natural_order6; break;
+  case 7: cinfo->natural_order = jpeg_natural_order7; break;
+  default: cinfo->natural_order = jpeg_natural_order; break;
+  }
+
+  /* Derive lim_Se from block_size */
+  cinfo->lim_Se = cinfo->block_size < DCTSIZE ?
+    cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1;
 
   /* Sanity check on image dimensions */
-  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
-      || cinfo->num_components <= 0 || cinfo->input_components <= 0)
+  if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 ||
+      cinfo->num_components <= 0)
     ERREXIT(cinfo, JERR_EMPTY_IMAGE);
 
   /* Make sure image isn't bigger than I can handle */
-  if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION ||
-      (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
+  if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION ||
+      (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
 
-  /* Width of an input scanline must be representable as JDIMENSION. */
-  samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components;
-  jd_samplesperrow = (JDIMENSION) samplesperrow;
-  if ((long) jd_samplesperrow != samplesperrow)
-    ERREXIT(cinfo, JERR_WIDTH_OVERFLOW);
-
-  /* For now, precision must match compiled-in value... */
-  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+  /* Only 8 to 12 bits data precision are supported for DCT based JPEG */
+  if (cinfo->data_precision < 8 || cinfo->data_precision > 12)
     ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
 
   /* Check that number of components won't exceed internal array sizes */
@@ -95,32 +107,64 @@ initial_setup (j_compress_ptr cinfo)
        ci++, compptr++) {
     /* Fill in the correct component_index value; don't rely on application */
     compptr->component_index = ci;
-    /* For compression, we never do DCT scaling. */
-    compptr->DCT_scaled_size = DCTSIZE;
+    /* In selecting the actual DCT scaling for each component, we try to
+     * scale down the chroma components via DCT scaling rather than downsampling.
+     * This saves time if the downsampler gets to use 1:1 scaling.
+     * Note this code adapts subsampling ratios which are powers of 2.
+     */
+    ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+    while (cinfo->min_DCT_h_scaled_size * ssize <=
+	   (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+#endif
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
+    ssize = 1;
+#ifdef DCT_SCALING_SUPPORTED
+    while (cinfo->min_DCT_v_scaled_size * ssize <=
+	   (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+#endif
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
+
+    /* We don't support DCT ratios larger than 2. */
+    if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
+	compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
+    else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
+	compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
+
     /* Size in DCT blocks */
     compptr->width_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->height_in_blocks = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     /* Size in samples */
     compptr->downsampled_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) cinfo->max_h_samp_factor);
+      jdiv_round_up((long) cinfo->jpeg_width *
+		    (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->downsampled_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) cinfo->max_v_samp_factor);
-    /* Mark component needed (this flag isn't actually used for compression) */
-    compptr->component_needed = TRUE;
+      jdiv_round_up((long) cinfo->jpeg_height *
+		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
+    /* Don't need quantization scale after DCT,
+     * until color conversion says otherwise.
+     */
+    compptr->component_needed = FALSE;
   }
 
   /* Compute number of fully interleaved MCU rows (number of times that
    * main controller will call coefficient controller).
    */
   cinfo->total_iMCU_rows = (JDIMENSION)
-    jdiv_round_up((long) cinfo->image_height,
-		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
+    jdiv_round_up((long) cinfo->jpeg_height,
+		  (long) (cinfo->max_v_samp_factor * cinfo->block_size));
 }
 
 
@@ -192,13 +236,9 @@ validate_script (j_compress_ptr cinfo)
        * out-of-range reconstructed DC values during the first DC scan,
        * which might cause problems for some decoders.
        */
-#if BITS_IN_JSAMPLE == 8
-#define MAX_AH_AL 10
-#else
-#define MAX_AH_AL 13
-#endif
       if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 ||
-	  Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL)
+	  Ah < 0 || Ah > (cinfo->data_precision > 8 ? 13 : 10) ||
+	  Al < 0 || Al > (cinfo->data_precision > 8 ? 13 : 10))
 	ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno);
       if (Ss == 0) {
 	if (Se != 0)		/* DC and AC together not OK */
@@ -260,6 +300,39 @@ validate_script (j_compress_ptr cinfo)
   }
 }
 
+
+LOCAL(void)
+reduce_script (j_compress_ptr cinfo)
+/* Adapt scan script for use with reduced block size;
+ * assume that script has been validated before.
+ */
+{
+  jpeg_scan_info * scanptr;
+  int idxout, idxin;
+
+  /* Circumvent const declaration for this function */
+  scanptr = (jpeg_scan_info *) cinfo->scan_info;
+  idxout = 0;
+
+  for (idxin = 0; idxin < cinfo->num_scans; idxin++) {
+    /* After skipping, idxout becomes smaller than idxin */
+    if (idxin != idxout)
+      /* Copy rest of data;
+       * note we stay in given chunk of allocated memory.
+       */
+      scanptr[idxout] = scanptr[idxin];
+    if (scanptr[idxout].Ss > cinfo->lim_Se)
+      /* Entire scan out of range - skip this entry */
+      continue;
+    if (scanptr[idxout].Se > cinfo->lim_Se)
+      /* Limit scan to end of block */
+      scanptr[idxout].Se = cinfo->lim_Se;
+    idxout++;
+  }
+
+  cinfo->num_scans = idxout;
+}
+
 #endif /* C_MULTISCAN_FILES_SUPPORTED */
 
 
@@ -280,10 +353,13 @@ select_scan_parameters (j_compress_ptr cinfo)
       cinfo->cur_comp_info[ci] =
 	&cinfo->comp_info[scanptr->component_index[ci]];
     }
-    cinfo->Ss = scanptr->Ss;
-    cinfo->Se = scanptr->Se;
-    cinfo->Ah = scanptr->Ah;
-    cinfo->Al = scanptr->Al;
+    if (cinfo->progressive_mode) {
+      cinfo->Ss = scanptr->Ss;
+      cinfo->Se = scanptr->Se;
+      cinfo->Ah = scanptr->Ah;
+      cinfo->Al = scanptr->Al;
+      return;
+    }
   }
   else
 #endif
@@ -296,11 +372,11 @@ select_scan_parameters (j_compress_ptr cinfo)
     for (ci = 0; ci < cinfo->num_components; ci++) {
       cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci];
     }
-    cinfo->Ss = 0;
-    cinfo->Se = DCTSIZE2-1;
-    cinfo->Ah = 0;
-    cinfo->Al = 0;
   }
+  cinfo->Ss = 0;
+  cinfo->Se = cinfo->block_size * cinfo->block_size - 1;
+  cinfo->Ah = 0;
+  cinfo->Al = 0;
 }
 
 
@@ -325,7 +401,7 @@ per_scan_setup (j_compress_ptr cinfo)
     compptr->MCU_width = 1;
     compptr->MCU_height = 1;
     compptr->MCU_blocks = 1;
-    compptr->MCU_sample_width = DCTSIZE;
+    compptr->MCU_sample_width = compptr->DCT_h_scaled_size;
     compptr->last_col_width = 1;
     /* For noninterleaved scans, it is convenient to define last_row_height
      * as the number of block rows present in the last iMCU row.
@@ -347,11 +423,11 @@ per_scan_setup (j_compress_ptr cinfo)
     
     /* Overall image size in MCUs */
     cinfo->MCUs_per_row = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width,
-		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_width,
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     cinfo->MCU_rows_in_scan = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height,
-		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
+      jdiv_round_up((long) cinfo->jpeg_height,
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     
     cinfo->blocks_in_MCU = 0;
     
@@ -361,7 +437,7 @@ per_scan_setup (j_compress_ptr cinfo)
       compptr->MCU_width = compptr->h_samp_factor;
       compptr->MCU_height = compptr->v_samp_factor;
       compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
-      compptr->MCU_sample_width = compptr->MCU_width * DCTSIZE;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size;
       /* Figure number of non-dummy blocks in last MCU column & row */
       tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
       if (tmp == 0) tmp = compptr->MCU_width;
@@ -433,7 +509,7 @@ prepare_for_pass (j_compress_ptr cinfo)
     /* Do Huffman optimization for a scan after the first one. */
     select_scan_parameters(cinfo);
     per_scan_setup(cinfo);
-    if (cinfo->Ss != 0 || cinfo->Ah == 0 || cinfo->arith_code) {
+    if (cinfo->Ss != 0 || cinfo->Ah == 0) {
       (*cinfo->entropy->start_pass) (cinfo, TRUE);
       (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST);
       master->pub.call_pass_startup = FALSE;
@@ -547,7 +623,7 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
   master = (my_master_ptr)
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				  SIZEOF(my_comp_master));
-  cinfo->master = (struct jpeg_comp_master *) master;
+  cinfo->master = &master->pub;
   master->pub.prepare_for_pass = prepare_for_pass;
   master->pub.pass_startup = pass_startup;
   master->pub.finish_pass = finish_pass_master;
@@ -559,6 +635,8 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
   if (cinfo->scan_info != NULL) {
 #ifdef C_MULTISCAN_FILES_SUPPORTED
     validate_script(cinfo);
+    if (cinfo->block_size < DCTSIZE)
+      reduce_script(cinfo);
 #else
     ERREXIT(cinfo, JERR_NOT_COMPILED);
 #endif
@@ -567,8 +645,14 @@ jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only)
     cinfo->num_scans = 1;
   }
 
-  if (cinfo->progressive_mode)	/*  TEMPORARY HACK ??? */
-    cinfo->optimize_coding = TRUE; /* assume default tables no good for progressive mode */
+  if (cinfo->optimize_coding)
+    cinfo->arith_code = FALSE; /* disable arithmetic coding */
+  else if (! cinfo->arith_code &&
+	   (cinfo->progressive_mode ||
+	    (cinfo->block_size > 1 && cinfo->block_size < DCTSIZE)))
+    /* TEMPORARY HACK ??? */
+    /* assume default tables no good for progressive or reduced AC mode */
+    cinfo->optimize_coding = TRUE; /* force Huffman optimization */
 
   /* Initialize my private state */
   if (transcode_only) {

jconfig.bcc

@@ -0,0 +1,48 @@
+/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#ifdef __MSDOS__
+#define NEED_FAR_POINTERS	/* for small or medium memory model */
+#endif
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN	/* this assumes you have -w-stu in CFLAGS */
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#ifdef __MSDOS__
+#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
+#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+#define USE_FMEM		/* Borland has _fmemcpy() and _fmemset() */
+#endif
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define USE_SETMODE		/* Borland has setmode() */
+#ifdef __MSDOS__
+#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
+#endif
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.cfg

@@ -0,0 +1,59 @@
+/* jconfig.cfg --- source file edited by configure script */
+/* see jconfig.txt for explanations */
+
+#undef HAVE_PROTOTYPES
+#undef HAVE_UNSIGNED_CHAR
+#undef HAVE_UNSIGNED_SHORT
+#undef void
+#undef const
+#undef CHAR_IS_UNSIGNED
+#undef HAVE_STDDEF_H
+#undef HAVE_STDLIB_H
+#undef HAVE_LOCALE_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+/* Define this if you get warnings about undefined structures. */
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define "boolean" as unsigned char, not enum, on Windows systems. */
+#ifdef _WIN32
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+#endif
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+#undef INLINE
+/* These are for configuring the JPEG memory manager. */
+#undef DEFAULT_MAX_MEM
+#undef NO_MKTEMP
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+
+/* Define this if you want percent-done progress reports from cjpeg/djpeg. */
+#undef PROGRESS_REPORT
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.dj

@@ -0,0 +1,38 @@
+/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* DJGPP uses flat 32-bit addressing */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Needed to make one-file style work in DJGPP */
+#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.h.in

@@ -1,49 +0,0 @@
-/* Define if your compiler supports prototypes */
-#undef HAVE_PROTOTYPES
-
-/* Define to 1 if you have the <stddef.h> header file. */
-#undef HAVE_STDDEF_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if the system has the type `unsigned char'. */
-#undef HAVE_UNSIGNED_CHAR
-
-/* Define to 1 if the system has the type `unsigned short'. */
-#undef HAVE_UNSIGNED_SHORT
-
-/* Define if you want use complete types */
-#undef INCOMPLETE_TYPES_BROKEN
-
-/* Define if you have BSD-like bzero and bcopy */
-#undef NEED_BSD_STRINGS
-
-/* Define if you need short function names */
-#undef NEED_SHORT_EXTERNAL_NAMES
-
-/* Define if you have sys/types.h */
-#undef NEED_SYS_TYPES_H
-
-/* Define if shift is unsigned */
-#undef RIGHT_SHIFT_IS_UNSIGNED
-
-/* Use accelerated SIMD routines. */
-#undef WITH_SIMD
-
-/* Define to 1 if type `char' is unsigned and you are not using gcc.  */
-#ifndef __CHAR_UNSIGNED__
-# undef __CHAR_UNSIGNED__
-#endif
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const
-
-/* Define to `__inline__' or `__inline' if that's what the C compiler
-   calls it, or to nothing if 'inline' is not supported under any name.  */
-#ifndef __cplusplus
-#undef inline
-#endif
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-#undef size_t

jconfig.mac

@@ -0,0 +1,43 @@
+/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define USE_MAC_MEMMGR		/* Define this if you use jmemmac.c */
+
+#define ALIGN_TYPE long		/* Needed for 680x0 Macs */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define USE_CCOMMAND		/* Command line reader for Macintosh */
+#define TWO_FILE_COMMANDLINE	/* Binary I/O thru stdin/stdout doesn't work */
+
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.manx

@@ -0,0 +1,43 @@
+/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
+
+#define SHORTxSHORT_32		/* produces better DCT code with Aztec C */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#define signal_catcher _abort	/* hack for Aztec C naming requirements */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.mc6

@@ -0,0 +1,52 @@
+/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#define NEED_FAR_POINTERS	/* for small or medium memory model */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define USE_MSDOS_MEMMGR	/* Define this if you use jmemdos.c */
+
+#define MAX_ALLOC_CHUNK 65520L	/* Maximum request to malloc() */
+
+#define USE_FMEM		/* Microsoft has _fmemcpy() and _fmemset() */
+
+#define NEED_FHEAPMIN		/* far heap management routines are broken */
+
+#define SHORTxLCONST_32		/* enable compiler-specific DCT optimization */
+/* Note: the above define is known to improve the code with Microsoft C 6.00A.
+ * I do not know whether it is good for later compiler versions.
+ * Please report any info on this point to jpeg-info@jpegclub.org.
+ */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define USE_SETMODE		/* Microsoft has setmode() */
+#define NEED_SIGNAL_CATCHER	/* Define this if you use jmemdos.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.sas

@@ -0,0 +1,43 @@
+/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define TEMP_DIRECTORY "JPEGTMP:"	/* recommended setting for Amiga */
+
+#define NO_MKTEMP		/* SAS C doesn't have mktemp() */
+
+#define SHORTxSHORT_32		/* produces better DCT code with SAS C */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE
+#define NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.st

@@ -0,0 +1,42 @@
+/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#define INCOMPLETE_TYPES_BROKEN	/* suppress undefined-structure warnings */
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#define ALIGN_TYPE  long	/* apparently double is a weird size? */
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE	/* optional -- undef if you like Unix style */
+/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define
+ * USE_SETMODE.  Some Atari compilers require it, some do not.
+ */
+#define NEED_SIGNAL_CATCHER	/* needed if you use jmemname.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.txt

@@ -1,7 +1,8 @@
 /*
- * jconfig.doc
+ * jconfig.txt
  *
  * Copyright (C) 1991-1994, Thomas G. Lane.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -24,7 +25,7 @@
  */
 
 /* Does your compiler support function prototypes?
- * (If not, you also need to use ansi2knr, see install.doc)
+ * (If not, you also need to use ansi2knr, see install.txt)
  */
 #define HAVE_PROTOTYPES
 
@@ -91,6 +92,21 @@
  */
 #undef INCOMPLETE_TYPES_BROKEN
 
+/* Define "boolean" as unsigned char, not enum, on Windows systems.
+ */
+#ifdef _WIN32
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+#endif
+
 
 /*
  * The following options affect code selection within the JPEG library,

jconfig.vc

@@ -0,0 +1,52 @@
+/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 9x or NT. */
+/* This file also works for Borland C++ 32-bit (bcc32) on Windows 9x or NT. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* we presume a 32-bit flat memory model */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+/* Define "boolean" as unsigned char, not enum, per Windows custom */
+#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
+typedef unsigned char boolean;
+#endif
+#ifndef FALSE			/* in case these macros already exist */
+#define FALSE	0		/* values of boolean */
+#endif
+#ifndef TRUE
+#define TRUE	1
+#endif
+#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
+
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Microsoft has setmode() */
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.vms

@@ -0,0 +1,37 @@
+/* jconfig.vms --- jconfig.h for use on Digital VMS. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#undef CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#define TWO_FILE_COMMANDLINE	/* Needed on VMS */
+#undef NEED_SIGNAL_CATCHER
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jconfig.wat

@@ -0,0 +1,38 @@
+/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */
+/* see jconfig.txt for explanations */
+
+#define HAVE_PROTOTYPES
+#define HAVE_UNSIGNED_CHAR
+#define HAVE_UNSIGNED_SHORT
+/* #define void char */
+/* #define const */
+#define CHAR_IS_UNSIGNED
+#define HAVE_STDDEF_H
+#define HAVE_STDLIB_H
+#undef NEED_BSD_STRINGS
+#undef NEED_SYS_TYPES_H
+#undef NEED_FAR_POINTERS	/* Watcom uses flat 32-bit addressing */
+#undef NEED_SHORT_EXTERNAL_NAMES
+#undef INCOMPLETE_TYPES_BROKEN
+
+#ifdef JPEG_INTERNALS
+
+#undef RIGHT_SHIFT_IS_UNSIGNED
+
+#endif /* JPEG_INTERNALS */
+
+#ifdef JPEG_CJPEG_DJPEG
+
+#define BMP_SUPPORTED		/* BMP image file format */
+#define GIF_SUPPORTED		/* GIF image file format */
+#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
+#undef RLE_SUPPORTED		/* Utah RLE image file format */
+#define TARGA_SUPPORTED		/* Targa image file format */
+
+#undef TWO_FILE_COMMANDLINE	/* optional */
+#define USE_SETMODE		/* Needed to make one-file style work in Watcom */
+#undef NEED_SIGNAL_CATCHER	/* Define this if you use jmemname.c */
+#undef DONT_USE_B_MODE
+#undef PROGRESS_REPORT		/* optional */
+
+#endif /* JPEG_CJPEG_DJPEG */

jcparam.c

@@ -2,7 +2,7 @@
  * jcparam.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
- * Copyright (C) 2009, D. R. Commander.
+ * Modified 2003-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -61,6 +61,47 @@ jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl,
 }
 
 
+/* These are the sample quantization tables given in JPEG spec section K.1.
+ * The spec says that the values given produce "good" quality, and
+ * when divided by 2, "very good" quality.
+ */
+static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
+  16,  11,  10,  16,  24,  40,  51,  61,
+  12,  12,  14,  19,  26,  58,  60,  55,
+  14,  13,  16,  24,  40,  57,  69,  56,
+  14,  17,  22,  29,  51,  87,  80,  62,
+  18,  22,  37,  56,  68, 109, 103,  77,
+  24,  35,  55,  64,  81, 104, 113,  92,
+  49,  64,  78,  87, 103, 121, 120, 101,
+  72,  92,  95,  98, 112, 100, 103,  99
+};
+static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
+  17,  18,  24,  47,  99,  99,  99,  99,
+  18,  21,  26,  66,  99,  99,  99,  99,
+  24,  26,  56,  99,  99,  99,  99,  99,
+  47,  66,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99,
+  99,  99,  99,  99,  99,  99,  99,  99
+};
+
+
+GLOBAL(void)
+jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline)
+/* Set or change the 'quality' (quantization) setting, using default tables
+ * and straight percentage-scaling quality scales.
+ * This entry point allows different scalings for luminance and chrominance.
+ */
+{
+  /* Set up two quantization tables using the specified scaling */
+  jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
+		       cinfo->q_scale_factor[0], force_baseline);
+  jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl,
+		       cinfo->q_scale_factor[1], force_baseline);
+}
+
+
 GLOBAL(void)
 jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
 			 boolean force_baseline)
@@ -70,31 +111,6 @@ jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor,
  * applications that insist on a linear percentage scaling.
  */
 {
-  /* These are the sample quantization tables given in JPEG spec section K.1.
-   * The spec says that the values given produce "good" quality, and
-   * when divided by 2, "very good" quality.
-   */
-  static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = {
-    16,  11,  10,  16,  24,  40,  51,  61,
-    12,  12,  14,  19,  26,  58,  60,  55,
-    14,  13,  16,  24,  40,  57,  69,  56,
-    14,  17,  22,  29,  51,  87,  80,  62,
-    18,  22,  37,  56,  68, 109, 103,  77,
-    24,  35,  55,  64,  81, 104, 113,  92,
-    49,  64,  78,  87, 103, 121, 120, 101,
-    72,  92,  95,  98, 112, 100, 103,  99
-  };
-  static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = {
-    17,  18,  24,  47,  99,  99,  99,  99,
-    18,  21,  26,  66,  99,  99,  99,  99,
-    24,  26,  56,  99,  99,  99,  99,  99,
-    47,  66,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99,
-    99,  99,  99,  99,  99,  99,  99,  99
-  };
-
   /* Set up two quantization tables using the specified scaling */
   jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl,
 		       scale_factor, force_baseline);
@@ -134,7 +150,7 @@ jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline)
 /* Set or change the 'quality' (quantization) setting, using default tables.
  * This is the standard quality-adjusting entry point for typical user
  * interfaces; only those who want detailed control over quantization tables
- * would use the preceding three routines directly.
+ * would use the preceding routines directly.
  */
 {
   /* Convert user 0-100 rating to percentage scaling */
@@ -285,6 +301,8 @@ jpeg_set_defaults (j_compress_ptr cinfo)
 
   /* Initialize everything not dependent on the color space */
 
+  cinfo->scale_num = 1;		/* 1:1 scaling */
+  cinfo->scale_denom = 1;
   cinfo->data_precision = BITS_IN_JSAMPLE;
   /* Set up two quantization tables using default quality of 75 */
   jpeg_set_quality(cinfo, 75, TRUE);
@@ -305,22 +323,24 @@ jpeg_set_defaults (j_compress_ptr cinfo)
   /* Expect normal source image, not raw downsampled data */
   cinfo->raw_data_in = FALSE;
 
-  /* Use Huffman coding, not arithmetic coding, by default */
-  cinfo->arith_code = FALSE;
+  /* The standard Huffman tables are only valid for 8-bit data precision.
+   * If the precision is higher, use arithmetic coding.
+   * (Alternatively, using Huffman coding would be possible with forcing
+   * optimization on so that usable tables will be computed, or by
+   * supplying default tables that are valid for the desired precision.)
+   * Otherwise, use Huffman coding by default.
+   */
+  cinfo->arith_code = cinfo->data_precision > 8 ? TRUE : FALSE;
 
   /* By default, don't do extra passes to optimize entropy coding */
   cinfo->optimize_coding = FALSE;
-  /* The standard Huffman tables are only valid for 8-bit data precision.
-   * If the precision is higher, force optimization on so that usable
-   * tables will be computed.  This test can be removed if default tables
-   * are supplied that are valid for the desired precision.
-   */
-  if (cinfo->data_precision > 8)
-    cinfo->optimize_coding = TRUE;
 
   /* By default, use the simpler non-cosited sampling alignment */
   cinfo->CCIR601_sampling = FALSE;
 
+  /* By default, apply fancy downsampling */
+  cinfo->do_fancy_downsampling = TRUE;
+
   /* No input smoothing */
   cinfo->smoothing_factor = 0;
 
@@ -339,6 +359,9 @@ jpeg_set_defaults (j_compress_ptr cinfo)
    * JFIF_minor_version to 2.  We could probably get away with just defaulting
    * to 1.02, but there may still be some decoders in use that will complain
    * about that; saying 1.01 should minimize compatibility problems.
+   *
+   * For wide gamut colorspaces (BG_RGB and BG_YCC), the major version will be
+   * overridden by jpeg_set_colorspace and set to 2.
    */
   cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */
   cinfo->JFIF_minor_version = 1;
@@ -346,6 +369,9 @@ jpeg_set_defaults (j_compress_ptr cinfo)
   cinfo->X_density = 1;		/* Pixel aspect ratio is square by default */
   cinfo->Y_density = 1;
 
+  /* No color transform */
+  cinfo->color_transform = JCT_NONE;
+
   /* Choose JPEG colorspace based on input space, set defaults accordingly */
 
   jpeg_default_colorspace(cinfo);
@@ -360,16 +386,13 @@ GLOBAL(void)
 jpeg_default_colorspace (j_compress_ptr cinfo)
 {
   switch (cinfo->in_color_space) {
+  case JCS_UNKNOWN:
+    jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
+    break;
   case JCS_GRAYSCALE:
     jpeg_set_colorspace(cinfo, JCS_GRAYSCALE);
     break;
   case JCS_RGB:
-  case JCS_EXT_RGB:
-  case JCS_EXT_RGBX:
-  case JCS_EXT_BGR:
-  case JCS_EXT_BGRX:
-  case JCS_EXT_XBGR:
-  case JCS_EXT_XRGB:
     jpeg_set_colorspace(cinfo, JCS_YCbCr);
     break;
   case JCS_YCbCr:
@@ -381,8 +404,12 @@ jpeg_default_colorspace (j_compress_ptr cinfo)
   case JCS_YCCK:
     jpeg_set_colorspace(cinfo, JCS_YCCK);
     break;
-  case JCS_UNKNOWN:
-    jpeg_set_colorspace(cinfo, JCS_UNKNOWN);
+  case JCS_BG_RGB:
+    /* No translation for now -- conversion to BG_YCC not yet supportet */
+    jpeg_set_colorspace(cinfo, JCS_BG_RGB);
+    break;
+  case JCS_BG_YCC:
+    jpeg_set_colorspace(cinfo, JCS_BG_YCC);
     break;
   default:
     ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE);
@@ -423,27 +450,40 @@ jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
   cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */
 
   switch (colorspace) {
+  case JCS_UNKNOWN:
+    cinfo->num_components = cinfo->input_components;
+    if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
+      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
+	       MAX_COMPONENTS);
+    for (ci = 0; ci < cinfo->num_components; ci++) {
+      SET_COMP(ci, ci, 1,1, 0, 0,0);
+    }
+    break;
   case JCS_GRAYSCALE:
     cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
     cinfo->num_components = 1;
     /* JFIF specifies component ID 1 */
-    SET_COMP(0, 1, 1,1, 0, 0,0);
+    SET_COMP(0, 0x01, 1,1, 0, 0,0);
     break;
   case JCS_RGB:
     cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */
     cinfo->num_components = 3;
-    SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0);
+    SET_COMP(0, 0x52 /* 'R' */, 1,1, 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
     SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0);
-    SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x42 /* 'B' */, 1,1, 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
     break;
   case JCS_YCbCr:
     cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
     cinfo->num_components = 3;
     /* JFIF specifies component IDs 1,2,3 */
     /* We default to 2x2 subsamples of chrominance */
-    SET_COMP(0, 1, 2,2, 0, 0,0);
-    SET_COMP(1, 2, 1,1, 1, 1,1);
-    SET_COMP(2, 3, 1,1, 1, 1,1);
+    SET_COMP(0, 0x01, 2,2, 0, 0,0);
+    SET_COMP(1, 0x02, 1,1, 1, 1,1);
+    SET_COMP(2, 0x03, 1,1, 1, 1,1);
     break;
   case JCS_CMYK:
     cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */
@@ -456,19 +496,33 @@ jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace)
   case JCS_YCCK:
     cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */
     cinfo->num_components = 4;
-    SET_COMP(0, 1, 2,2, 0, 0,0);
-    SET_COMP(1, 2, 1,1, 1, 1,1);
-    SET_COMP(2, 3, 1,1, 1, 1,1);
-    SET_COMP(3, 4, 2,2, 0, 0,0);
+    SET_COMP(0, 0x01, 2,2, 0, 0,0);
+    SET_COMP(1, 0x02, 1,1, 1, 1,1);
+    SET_COMP(2, 0x03, 1,1, 1, 1,1);
+    SET_COMP(3, 0x04, 2,2, 0, 0,0);
     break;
-  case JCS_UNKNOWN:
-    cinfo->num_components = cinfo->input_components;
-    if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS)
-      ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components,
-	       MAX_COMPONENTS);
-    for (ci = 0; ci < cinfo->num_components; ci++) {
-      SET_COMP(ci, ci, 1,1, 0, 0,0);
-    }
+  case JCS_BG_RGB:
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
+    cinfo->JFIF_major_version = 2;   /* Set JFIF major version = 2 */
+    cinfo->num_components = 3;
+    /* Add offset 0x20 to the normal R/G/B component IDs */
+    SET_COMP(0, 0x72 /* 'r' */, 1,1, 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
+    SET_COMP(1, 0x67 /* 'g' */, 1,1, 0, 0,0);
+    SET_COMP(2, 0x62 /* 'b' */, 1,1, 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0,
+		cinfo->color_transform == JCT_SUBTRACT_GREEN ? 1 : 0);
+    break;
+  case JCS_BG_YCC:
+    cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */
+    cinfo->JFIF_major_version = 2;   /* Set JFIF major version = 2 */
+    cinfo->num_components = 3;
+    /* Add offset 0x20 to the normal Cb/Cr component IDs */
+    /* We default to 2x2 subsamples of chrominance */
+    SET_COMP(0, 0x01, 2,2, 0, 0,0);
+    SET_COMP(1, 0x22, 1,1, 1, 1,1);
+    SET_COMP(2, 0x23, 1,1, 1, 1,1);
     break;
   default:
     ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
@@ -552,8 +606,10 @@ jpeg_simple_progression (j_compress_ptr cinfo)
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
   /* Figure space needed for script.  Calculation must match code below! */
-  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
-    /* Custom script for YCbCr color images. */
+  if (ncomps == 3 &&
+      (cinfo->jpeg_color_space == JCS_YCbCr ||
+       cinfo->jpeg_color_space == JCS_BG_YCC)) {
+    /* Custom script for YCC color images. */
     nscans = 10;
   } else {
     /* All-purpose script for other color spaces. */
@@ -568,7 +624,7 @@ jpeg_simple_progression (j_compress_ptr cinfo)
    * multiple compressions without changing the settings.  To avoid a memory
    * leak if jpeg_simple_progression is called repeatedly for the same JPEG
    * object, we try to re-use previously allocated space, and we allocate
-   * enough space to handle YCbCr even if initially asked for grayscale.
+   * enough space to handle YCC even if initially asked for grayscale.
    */
   if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) {
     cinfo->script_space_size = MAX(nscans, 10);
@@ -580,8 +636,10 @@ jpeg_simple_progression (j_compress_ptr cinfo)
   cinfo->scan_info = scanptr;
   cinfo->num_scans = nscans;
 
-  if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) {
-    /* Custom script for YCbCr color images. */
+  if (ncomps == 3 &&
+      (cinfo->jpeg_color_space == JCS_YCbCr ||
+       cinfo->jpeg_color_space == JCS_BG_YCC)) {
+    /* Custom script for YCC color images. */
     /* Initial DC scan */
     scanptr = fill_dc_scans(scanptr, ncomps, 0, 1);
     /* Initial AC scan: get some luma data out in a hurry */

jcphuff.c

@@ -1,831 +0,0 @@
-/*
- * jcphuff.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy encoding routines for progressive JPEG.
- *
- * We do not support output suspension in this module, since the library
- * currently does not allow multiple-scan files to be written with output
- * suspension.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jchuff.h"		/* Declarations shared with jchuff.c */
-
-#ifdef C_PROGRESSIVE_SUPPORTED
-
-/* Expanded entropy encoder object for progressive Huffman encoding. */
-
-typedef struct {
-  struct jpeg_entropy_encoder pub; /* public fields */
-
-  /* Mode flag: TRUE for optimization, FALSE for actual data output */
-  boolean gather_statistics;
-
-  /* Bit-level coding status.
-   * next_output_byte/free_in_buffer are local copies of cinfo->dest fields.
-   */
-  JOCTET * next_output_byte;	/* => next byte to write in buffer */
-  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
-  INT32 put_buffer;		/* current bit-accumulation buffer */
-  int put_bits;			/* # of bits now in it */
-  j_compress_ptr cinfo;		/* link to cinfo (needed for dump_buffer) */
-
-  /* Coding status for DC components */
-  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
-
-  /* Coding status for AC components */
-  int ac_tbl_no;		/* the table number of the single component */
-  unsigned int EOBRUN;		/* run length of EOBs */
-  unsigned int BE;		/* # of buffered correction bits before MCU */
-  char * bit_buffer;		/* buffer for correction bits (1 per char) */
-  /* packing correction bits tightly would save some space but cost time... */
-
-  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
-  int next_restart_num;		/* next restart number to write (0-7) */
-
-  /* Pointers to derived tables (these workspaces have image lifespan).
-   * Since any one scan codes only DC or only AC, we only need one set
-   * of tables, not one for DC and one for AC.
-   */
-  c_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
-
-  /* Statistics tables for optimization; again, one set is enough */
-  long * count_ptrs[NUM_HUFF_TBLS];
-} phuff_entropy_encoder;
-
-typedef phuff_entropy_encoder * phuff_entropy_ptr;
-
-/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit
- * buffer can hold.  Larger sizes may slightly improve compression, but
- * 1000 is already well into the realm of overkill.
- * The minimum safe size is 64 bits.
- */
-
-#define MAX_CORR_BITS  1000	/* Max # of correction bits I can buffer */
-
-/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32.
- * We assume that int right shift is unsigned if INT32 right shift is,
- * which should be safe.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define ISHIFT_TEMPS	int ishift_temp;
-#define IRIGHT_SHIFT(x,shft)  \
-	((ishift_temp = (x)) < 0 ? \
-	 (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \
-	 (ishift_temp >> (shft)))
-#else
-#define ISHIFT_TEMPS
-#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
-#endif
-
-/* Forward declarations */
-METHODDEF(boolean) encode_mcu_DC_first JPP((j_compress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_first JPP((j_compress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_DC_refine JPP((j_compress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(boolean) encode_mcu_AC_refine JPP((j_compress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(void) finish_pass_phuff JPP((j_compress_ptr cinfo));
-METHODDEF(void) finish_pass_gather_phuff JPP((j_compress_ptr cinfo));
-
-
-/*
- * Initialize for a Huffman-compressed scan using progressive JPEG.
- */
-
-METHODDEF(void)
-start_pass_phuff (j_compress_ptr cinfo, boolean gather_statistics)
-{  
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band;
-  int ci, tbl;
-  jpeg_component_info * compptr;
-
-  entropy->cinfo = cinfo;
-  entropy->gather_statistics = gather_statistics;
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* We assume jcmaster.c already validated the scan parameters. */
-
-  /* Select execution routines */
-  if (cinfo->Ah == 0) {
-    if (is_DC_band)
-      entropy->pub.encode_mcu = encode_mcu_DC_first;
-    else
-      entropy->pub.encode_mcu = encode_mcu_AC_first;
-  } else {
-    if (is_DC_band)
-      entropy->pub.encode_mcu = encode_mcu_DC_refine;
-    else {
-      entropy->pub.encode_mcu = encode_mcu_AC_refine;
-      /* AC refinement needs a correction bit buffer */
-      if (entropy->bit_buffer == NULL)
-	entropy->bit_buffer = (char *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      MAX_CORR_BITS * SIZEOF(char));
-    }
-  }
-  if (gather_statistics)
-    entropy->pub.finish_pass = finish_pass_gather_phuff;
-  else
-    entropy->pub.finish_pass = finish_pass_phuff;
-
-  /* Only DC coefficients may be interleaved, so cinfo->comps_in_scan = 1
-   * for AC coefficients.
-   */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    /* Initialize DC predictions to 0 */
-    entropy->last_dc_val[ci] = 0;
-    /* Get table index */
-    if (is_DC_band) {
-      if (cinfo->Ah != 0)	/* DC refinement needs no table */
-	continue;
-      tbl = compptr->dc_tbl_no;
-    } else {
-      entropy->ac_tbl_no = tbl = compptr->ac_tbl_no;
-    }
-    if (gather_statistics) {
-      /* Check for invalid table index */
-      /* (make_c_derived_tbl does this in the other path) */
-      if (tbl < 0 || tbl >= NUM_HUFF_TBLS)
-        ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl);
-      /* Allocate and zero the statistics tables */
-      /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */
-      if (entropy->count_ptrs[tbl] == NULL)
-	entropy->count_ptrs[tbl] = (long *)
-	  (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				      257 * SIZEOF(long));
-      MEMZERO(entropy->count_ptrs[tbl], 257 * SIZEOF(long));
-    } else {
-      /* Compute derived values for Huffman table */
-      /* We may do this more than once for a table, but it's not expensive */
-      jpeg_make_c_derived_tbl(cinfo, is_DC_band, tbl,
-			      & entropy->derived_tbls[tbl]);
-    }
-  }
-
-  /* Initialize AC stuff */
-  entropy->EOBRUN = 0;
-  entropy->BE = 0;
-
-  /* Initialize bit buffer to empty */
-  entropy->put_buffer = 0;
-  entropy->put_bits = 0;
-
-  /* Initialize restart stuff */
-  entropy->restarts_to_go = cinfo->restart_interval;
-  entropy->next_restart_num = 0;
-}
-
-
-/* Outputting bytes to the file.
- * NB: these must be called only when actually outputting,
- * that is, entropy->gather_statistics == FALSE.
- */
-
-/* Emit a byte */
-#define emit_byte(entropy,val)  \
-	{ *(entropy)->next_output_byte++ = (JOCTET) (val);  \
-	  if (--(entropy)->free_in_buffer == 0)  \
-	    dump_buffer(entropy); }
-
-
-LOCAL(void)
-dump_buffer (phuff_entropy_ptr entropy)
-/* Empty the output buffer; we do not support suspension in this module. */
-{
-  struct jpeg_destination_mgr * dest = entropy->cinfo->dest;
-
-  if (! (*dest->empty_output_buffer) (entropy->cinfo))
-    ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND);
-  /* After a successful buffer dump, must reset buffer pointers */
-  entropy->next_output_byte = dest->next_output_byte;
-  entropy->free_in_buffer = dest->free_in_buffer;
-}
-
-
-/* Outputting bits to the file */
-
-/* Only the right 24 bits of put_buffer are used; the valid bits are
- * left-justified in this part.  At most 16 bits can be passed to emit_bits
- * in one call, and we never retain more than 7 bits in put_buffer
- * between calls, so 24 bits are sufficient.
- */
-
-LOCAL(void)
-emit_bits (phuff_entropy_ptr entropy, unsigned int code, int size)
-/* Emit some bits, unless we are in gather mode */
-{
-  /* This routine is heavily used, so it's worth coding tightly. */
-  register INT32 put_buffer = (INT32) code;
-  register int put_bits = entropy->put_bits;
-
-  /* if size is 0, caller used an invalid Huffman table entry */
-  if (size == 0)
-    ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
-
-  if (entropy->gather_statistics)
-    return;			/* do nothing if we're only getting stats */
-
-  put_buffer &= (((INT32) 1)<<size) - 1; /* mask off any extra bits in code */
-  
-  put_bits += size;		/* new number of bits in buffer */
-  
-  put_buffer <<= 24 - put_bits; /* align incoming bits */
-
-  put_buffer |= entropy->put_buffer; /* and merge with old buffer contents */
-
-  while (put_bits >= 8) {
-    int c = (int) ((put_buffer >> 16) & 0xFF);
-    
-    emit_byte(entropy, c);
-    if (c == 0xFF) {		/* need to stuff a zero byte? */
-      emit_byte(entropy, 0);
-    }
-    put_buffer <<= 8;
-    put_bits -= 8;
-  }
-
-  entropy->put_buffer = put_buffer; /* update variables */
-  entropy->put_bits = put_bits;
-}
-
-
-LOCAL(void)
-flush_bits (phuff_entropy_ptr entropy)
-{
-  emit_bits(entropy, 0x7F, 7); /* fill any partial byte with ones */
-  entropy->put_buffer = 0;     /* and reset bit-buffer to empty */
-  entropy->put_bits = 0;
-}
-
-
-/*
- * Emit (or just count) a Huffman symbol.
- */
-
-LOCAL(void)
-emit_symbol (phuff_entropy_ptr entropy, int tbl_no, int symbol)
-{
-  if (entropy->gather_statistics)
-    entropy->count_ptrs[tbl_no][symbol]++;
-  else {
-    c_derived_tbl * tbl = entropy->derived_tbls[tbl_no];
-    emit_bits(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]);
-  }
-}
-
-
-/*
- * Emit bits from a correction bit buffer.
- */
-
-LOCAL(void)
-emit_buffered_bits (phuff_entropy_ptr entropy, char * bufstart,
-		    unsigned int nbits)
-{
-  if (entropy->gather_statistics)
-    return;			/* no real work */
-
-  while (nbits > 0) {
-    emit_bits(entropy, (unsigned int) (*bufstart), 1);
-    bufstart++;
-    nbits--;
-  }
-}
-
-
-/*
- * Emit any pending EOBRUN symbol.
- */
-
-LOCAL(void)
-emit_eobrun (phuff_entropy_ptr entropy)
-{
-  register int temp, nbits;
-
-  if (entropy->EOBRUN > 0) {	/* if there is any pending EOBRUN */
-    temp = entropy->EOBRUN;
-    nbits = 0;
-    while ((temp >>= 1))
-      nbits++;
-    /* safety check: shouldn't happen given limited correction-bit buffer */
-    if (nbits > 14)
-      ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE);
-
-    emit_symbol(entropy, entropy->ac_tbl_no, nbits << 4);
-    if (nbits)
-      emit_bits(entropy, entropy->EOBRUN, nbits);
-
-    entropy->EOBRUN = 0;
-
-    /* Emit any buffered correction bits */
-    emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE);
-    entropy->BE = 0;
-  }
-}
-
-
-/*
- * Emit a restart marker & resynchronize predictions.
- */
-
-LOCAL(void)
-emit_restart (phuff_entropy_ptr entropy, int restart_num)
-{
-  int ci;
-
-  emit_eobrun(entropy);
-
-  if (! entropy->gather_statistics) {
-    flush_bits(entropy);
-    emit_byte(entropy, 0xFF);
-    emit_byte(entropy, JPEG_RST0 + restart_num);
-  }
-
-  if (entropy->cinfo->Ss == 0) {
-    /* Re-initialize DC predictions to 0 */
-    for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++)
-      entropy->last_dc_val[ci] = 0;
-  } else {
-    /* Re-initialize all AC-related fields to 0 */
-    entropy->EOBRUN = 0;
-    entropy->BE = 0;
-  }
-}
-
-
-/*
- * MCU encoding for DC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp, temp2;
-  register int nbits;
-  int blkn, ci;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-  jpeg_component_info * compptr;
-  ISHIFT_TEMPS
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data blocks */
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-    ci = cinfo->MCU_membership[blkn];
-    compptr = cinfo->cur_comp_info[ci];
-
-    /* Compute the DC value after the required point transform by Al.
-     * This is simply an arithmetic right shift.
-     */
-    temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al);
-
-    /* DC differences are figured on the point-transformed values. */
-    temp = temp2 - entropy->last_dc_val[ci];
-    entropy->last_dc_val[ci] = temp2;
-
-    /* Encode the DC coefficient difference per section G.1.2.1 */
-    temp2 = temp;
-    if (temp < 0) {
-      temp = -temp;		/* temp is abs value of input */
-      /* For a negative input, want temp2 = bitwise complement of abs(input) */
-      /* This code assumes we are on a two's complement machine */
-      temp2--;
-    }
-    
-    /* Find the number of bits needed for the magnitude of the coefficient */
-    nbits = 0;
-    while (temp) {
-      nbits++;
-      temp >>= 1;
-    }
-    /* Check for out-of-range coefficient values.
-     * Since we're encoding a difference, the range limit is twice as much.
-     */
-    if (nbits > MAX_COEF_BITS+1)
-      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-    
-    /* Count/emit the Huffman-coded symbol for the number of bits */
-    emit_symbol(entropy, compptr->dc_tbl_no, nbits);
-    
-    /* Emit that number of bits of the value, if positive, */
-    /* or the complement of its magnitude, if negative. */
-    if (nbits)			/* emit_bits rejects calls with size 0 */
-      emit_bits(entropy, (unsigned int) temp2, nbits);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for AC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp, temp2;
-  register int nbits;
-  register int r, k;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data block */
-  block = MCU_data[0];
-
-  /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */
-  
-  r = 0;			/* r = run length of zeros */
-   
-  for (k = cinfo->Ss; k <= Se; k++) {
-    if ((temp = (*block)[jpeg_natural_order[k]]) == 0) {
-      r++;
-      continue;
-    }
-    /* We must apply the point transform by Al.  For AC coefficients this
-     * is an integer division with rounding towards 0.  To do this portably
-     * in C, we shift after obtaining the absolute value; so the code is
-     * interwoven with finding the abs value (temp) and output bits (temp2).
-     */
-    if (temp < 0) {
-      temp = -temp;		/* temp is abs value of input */
-      temp >>= Al;		/* apply the point transform */
-      /* For a negative coef, want temp2 = bitwise complement of abs(coef) */
-      temp2 = ~temp;
-    } else {
-      temp >>= Al;		/* apply the point transform */
-      temp2 = temp;
-    }
-    /* Watch out for case that nonzero coef is zero after point transform */
-    if (temp == 0) {
-      r++;
-      continue;
-    }
-
-    /* Emit any pending EOBRUN */
-    if (entropy->EOBRUN > 0)
-      emit_eobrun(entropy);
-    /* if run length > 15, must emit special run-length-16 codes (0xF0) */
-    while (r > 15) {
-      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
-      r -= 16;
-    }
-
-    /* Find the number of bits needed for the magnitude of the coefficient */
-    nbits = 1;			/* there must be at least one 1 bit */
-    while ((temp >>= 1))
-      nbits++;
-    /* Check for out-of-range coefficient values */
-    if (nbits > MAX_COEF_BITS)
-      ERREXIT(cinfo, JERR_BAD_DCT_COEF);
-
-    /* Count/emit Huffman symbol for run length / number of bits */
-    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits);
-
-    /* Emit that number of bits of the value, if positive, */
-    /* or the complement of its magnitude, if negative. */
-    emit_bits(entropy, (unsigned int) temp2, nbits);
-
-    r = 0;			/* reset zero run length */
-  }
-
-  if (r > 0) {			/* If there are trailing zeroes, */
-    entropy->EOBRUN++;		/* count an EOB */
-    if (entropy->EOBRUN == 0x7FFF)
-      emit_eobrun(entropy);	/* force it out to avoid overflow */
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
- * is not very clear on the point.
- */
-
-METHODDEF(boolean)
-encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp;
-  int blkn;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data blocks */
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-
-    /* We simply emit the Al'th bit of the DC coefficient value. */
-    temp = (*block)[0];
-    emit_bits(entropy, (unsigned int) (temp >> Al), 1);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * MCU encoding for AC successive approximation refinement scan.
- */
-
-METHODDEF(boolean)
-encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  register int temp;
-  register int r, k;
-  int EOB;
-  char *BR_buffer;
-  unsigned int BR;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  JBLOCKROW block;
-  int absvalues[DCTSIZE2];
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Emit restart marker if needed */
-  if (cinfo->restart_interval)
-    if (entropy->restarts_to_go == 0)
-      emit_restart(entropy, entropy->next_restart_num);
-
-  /* Encode the MCU data block */
-  block = MCU_data[0];
-
-  /* It is convenient to make a pre-pass to determine the transformed
-   * coefficients' absolute values and the EOB position.
-   */
-  EOB = 0;
-  for (k = cinfo->Ss; k <= Se; k++) {
-    temp = (*block)[jpeg_natural_order[k]];
-    /* We must apply the point transform by Al.  For AC coefficients this
-     * is an integer division with rounding towards 0.  To do this portably
-     * in C, we shift after obtaining the absolute value.
-     */
-    if (temp < 0)
-      temp = -temp;		/* temp is abs value of input */
-    temp >>= Al;		/* apply the point transform */
-    absvalues[k] = temp;	/* save abs value for main pass */
-    if (temp == 1)
-      EOB = k;			/* EOB = index of last newly-nonzero coef */
-  }
-
-  /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */
-  
-  r = 0;			/* r = run length of zeros */
-  BR = 0;			/* BR = count of buffered bits added now */
-  BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */
-
-  for (k = cinfo->Ss; k <= Se; k++) {
-    if ((temp = absvalues[k]) == 0) {
-      r++;
-      continue;
-    }
-
-    /* Emit any required ZRLs, but not if they can be folded into EOB */
-    while (r > 15 && k <= EOB) {
-      /* emit any pending EOBRUN and the BE correction bits */
-      emit_eobrun(entropy);
-      /* Emit ZRL */
-      emit_symbol(entropy, entropy->ac_tbl_no, 0xF0);
-      r -= 16;
-      /* Emit buffered correction bits that must be associated with ZRL */
-      emit_buffered_bits(entropy, BR_buffer, BR);
-      BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
-      BR = 0;
-    }
-
-    /* If the coef was previously nonzero, it only needs a correction bit.
-     * NOTE: a straight translation of the spec's figure G.7 would suggest
-     * that we also need to test r > 15.  But if r > 15, we can only get here
-     * if k > EOB, which implies that this coefficient is not 1.
-     */
-    if (temp > 1) {
-      /* The correction bit is the next bit of the absolute value. */
-      BR_buffer[BR++] = (char) (temp & 1);
-      continue;
-    }
-
-    /* Emit any pending EOBRUN and the BE correction bits */
-    emit_eobrun(entropy);
-
-    /* Count/emit Huffman symbol for run length / number of bits */
-    emit_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1);
-
-    /* Emit output bit for newly-nonzero coef */
-    temp = ((*block)[jpeg_natural_order[k]] < 0) ? 0 : 1;
-    emit_bits(entropy, (unsigned int) temp, 1);
-
-    /* Emit buffered correction bits that must be associated with this code */
-    emit_buffered_bits(entropy, BR_buffer, BR);
-    BR_buffer = entropy->bit_buffer; /* BE bits are gone now */
-    BR = 0;
-    r = 0;			/* reset zero run length */
-  }
-
-  if (r > 0 || BR > 0) {	/* If there are trailing zeroes, */
-    entropy->EOBRUN++;		/* count an EOB */
-    entropy->BE += BR;		/* concat my correction bits to older ones */
-    /* We force out the EOB if we risk either:
-     * 1. overflow of the EOB counter;
-     * 2. overflow of the correction bit buffer during the next MCU.
-     */
-    if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1))
-      emit_eobrun(entropy);
-  }
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-
-  /* Update restart-interval state too */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0) {
-      entropy->restarts_to_go = cinfo->restart_interval;
-      entropy->next_restart_num++;
-      entropy->next_restart_num &= 7;
-    }
-    entropy->restarts_to_go--;
-  }
-
-  return TRUE;
-}
-
-
-/*
- * Finish up at the end of a Huffman-compressed progressive scan.
- */
-
-METHODDEF(void)
-finish_pass_phuff (j_compress_ptr cinfo)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-
-  entropy->next_output_byte = cinfo->dest->next_output_byte;
-  entropy->free_in_buffer = cinfo->dest->free_in_buffer;
-
-  /* Flush out any buffered data */
-  emit_eobrun(entropy);
-  flush_bits(entropy);
-
-  cinfo->dest->next_output_byte = entropy->next_output_byte;
-  cinfo->dest->free_in_buffer = entropy->free_in_buffer;
-}
-
-
-/*
- * Finish up a statistics-gathering pass and create the new Huffman tables.
- */
-
-METHODDEF(void)
-finish_pass_gather_phuff (j_compress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band;
-  int ci, tbl;
-  jpeg_component_info * compptr;
-  JHUFF_TBL **htblptr;
-  boolean did[NUM_HUFF_TBLS];
-
-  /* Flush out buffered data (all we care about is counting the EOB symbol) */
-  emit_eobrun(entropy);
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* It's important not to apply jpeg_gen_optimal_table more than once
-   * per table, because it clobbers the input frequency counts!
-   */
-  MEMZERO(did, SIZEOF(did));
-
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    if (is_DC_band) {
-      if (cinfo->Ah != 0)	/* DC refinement needs no table */
-	continue;
-      tbl = compptr->dc_tbl_no;
-    } else {
-      tbl = compptr->ac_tbl_no;
-    }
-    if (! did[tbl]) {
-      if (is_DC_band)
-        htblptr = & cinfo->dc_huff_tbl_ptrs[tbl];
-      else
-        htblptr = & cinfo->ac_huff_tbl_ptrs[tbl];
-      if (*htblptr == NULL)
-        *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo);
-      jpeg_gen_optimal_table(cinfo, *htblptr, entropy->count_ptrs[tbl]);
-      did[tbl] = TRUE;
-    }
-  }
-}
-
-
-/*
- * Module initialization routine for progressive Huffman entropy encoding.
- */
-
-GLOBAL(void)
-jinit_phuff_encoder (j_compress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy;
-  int i;
-
-  entropy = (phuff_entropy_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(phuff_entropy_encoder));
-  cinfo->entropy = (struct jpeg_entropy_encoder *) entropy;
-  entropy->pub.start_pass = start_pass_phuff;
-
-  /* Mark tables unallocated */
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    entropy->derived_tbls[i] = NULL;
-    entropy->count_ptrs[i] = NULL;
-  }
-  entropy->bit_buffer = NULL;	/* needed only in AC refinement scan */
-}
-
-#endif /* C_PROGRESSIVE_SUPPORTED */

jcprepct.c

@@ -173,10 +173,12 @@ pre_process_data (j_compress_ptr cinfo,
 	*out_row_group_ctr < out_row_groups_avail) {
       for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	   ci++, compptr++) {
+	numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		  cinfo->min_DCT_v_scaled_size;
 	expand_bottom_edge(output_buf[ci],
-			   compptr->width_in_blocks * DCTSIZE,
-			   (int) (*out_row_group_ctr * compptr->v_samp_factor),
-			   (int) (out_row_groups_avail * compptr->v_samp_factor));
+			   compptr->width_in_blocks * compptr->DCT_h_scaled_size,
+			   (int) (*out_row_group_ctr * numrows),
+			   (int) (out_row_groups_avail * numrows));
       }
       *out_row_group_ctr = out_row_groups_avail;
       break;			/* can exit outer loop without test */
@@ -288,7 +290,8 @@ create_context_buffer (j_compress_ptr cinfo)
      */
     true_buffer = (*cinfo->mem->alloc_sarray)
       ((j_common_ptr) cinfo, JPOOL_IMAGE,
-       (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
+       (JDIMENSION) (((long) compptr->width_in_blocks *
+		      cinfo->min_DCT_h_scaled_size *
 		      cinfo->max_h_samp_factor) / compptr->h_samp_factor),
        (JDIMENSION) (3 * rgroup_height));
     /* Copy true buffer row pointers into the middle of the fake row array */
@@ -346,7 +349,8 @@ jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer)
 	 ci++, compptr++) {
       prep->color_buf[ci] = (*cinfo->mem->alloc_sarray)
 	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 (JDIMENSION) (((long) compptr->width_in_blocks * DCTSIZE *
+	 (JDIMENSION) (((long) compptr->width_in_blocks *
+			cinfo->min_DCT_h_scaled_size *
 			cinfo->max_h_samp_factor) / compptr->h_samp_factor),
 	 (JDIMENSION) cinfo->max_v_samp_factor);
     }

jcsample.c

@@ -2,7 +2,6 @@
  * jcsample.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
- * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -49,7 +48,6 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
-#include "jsimd.h"
 
 
 /* Pointer to routine to downsample a single component */
@@ -64,6 +62,15 @@ typedef struct {
 
   /* Downsampling method pointers, one per component */
   downsample1_ptr methods[MAX_COMPONENTS];
+
+  /* Height of an output row group for each component. */
+  int rowgroup_height[MAX_COMPONENTS];
+
+  /* These arrays save pixel expansion factors so that int_downsample need not
+   * recompute them each time.  They are unused for other downsampling methods.
+   */
+  UINT8 h_expand[MAX_COMPONENTS];
+  UINT8 v_expand[MAX_COMPONENTS];
 } my_downsampler;
 
 typedef my_downsampler * my_downsample_ptr;
@@ -125,7 +132,8 @@ sep_downsample (j_compress_ptr cinfo,
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     in_ptr = input_buf[ci] + in_row_index;
-    out_ptr = output_buf[ci] + (out_row_group_index * compptr->v_samp_factor);
+    out_ptr = output_buf[ci] +
+	      (out_row_group_index * downsample->rowgroup_height[ci]);
     (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr);
   }
 }
@@ -142,14 +150,15 @@ METHODDEF(void)
 int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 		JSAMPARRAY input_data, JSAMPARRAY output_data)
 {
+  my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample;
   int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v;
   JDIMENSION outcol, outcol_h;	/* outcol_h == outcol*h_expand */
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   JSAMPROW inptr, outptr;
   INT32 outvalue;
 
-  h_expand = cinfo->max_h_samp_factor / compptr->h_samp_factor;
-  v_expand = cinfo->max_v_samp_factor / compptr->v_samp_factor;
+  h_expand = downsample->h_expand[compptr->component_index];
+  v_expand = downsample->v_expand[compptr->component_index];
   numpix = h_expand * v_expand;
   numpix2 = numpix/2;
 
@@ -160,8 +169,8 @@ int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   expand_right_edge(input_data, cinfo->max_v_samp_factor,
 		    cinfo->image_width, output_cols * h_expand);
 
-  inrow = 0;
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
     outptr = output_data[outrow];
     for (outcol = 0, outcol_h = 0; outcol < output_cols;
 	 outcol++, outcol_h += h_expand) {
@@ -175,6 +184,7 @@ int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
       *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix);
     }
     inrow += v_expand;
+    outrow++;
   }
 }
 
@@ -193,8 +203,8 @@ fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   jcopy_sample_rows(input_data, 0, output_data, 0,
 		    cinfo->max_v_samp_factor, cinfo->image_width);
   /* Edge-expand */
-  expand_right_edge(output_data, cinfo->max_v_samp_factor,
-		    cinfo->image_width, compptr->width_in_blocks * DCTSIZE);
+  expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width,
+		    compptr->width_in_blocks * compptr->DCT_h_scaled_size);
 }
 
 
@@ -214,9 +224,9 @@ METHODDEF(void)
 h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 		 JSAMPARRAY input_data, JSAMPARRAY output_data)
 {
-  int outrow;
+  int inrow;
   JDIMENSION outcol;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr, outptr;
   register int bias;
 
@@ -227,9 +237,9 @@ h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   expand_right_edge(input_data, cinfo->max_v_samp_factor,
 		    cinfo->image_width, output_cols * 2);
 
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
-    outptr = output_data[outrow];
-    inptr = input_data[outrow];
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    outptr = output_data[inrow];
+    inptr = input_data[inrow];
     bias = 0;			/* bias = 0,1,0,1,... for successive samples */
     for (outcol = 0; outcol < output_cols; outcol++) {
       *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1])
@@ -253,7 +263,7 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   int inrow, outrow;
   JDIMENSION outcol;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr0, inptr1, outptr;
   register int bias;
 
@@ -264,8 +274,8 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   expand_right_edge(input_data, cinfo->max_v_samp_factor,
 		    cinfo->image_width, output_cols * 2);
 
-  inrow = 0;
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
     outptr = output_data[outrow];
     inptr0 = input_data[inrow];
     inptr1 = input_data[inrow+1];
@@ -278,6 +288,7 @@ h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
       inptr0 += 2; inptr1 += 2;
     }
     inrow += 2;
+    outrow++;
   }
 }
 
@@ -296,7 +307,7 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
 {
   int inrow, outrow;
   JDIMENSION colctr;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr;
   INT32 membersum, neighsum, memberscale, neighscale;
 
@@ -323,8 +334,8 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
   memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */
   neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */
 
-  inrow = 0;
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
+  inrow = outrow = 0;
+  while (inrow < cinfo->max_v_samp_factor) {
     outptr = output_data[outrow];
     inptr0 = input_data[inrow];
     inptr1 = input_data[inrow+1];
@@ -380,6 +391,7 @@ h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr,
     *outptr = (JSAMPLE) ((membersum + 32768) >> 16);
 
     inrow += 2;
+    outrow++;
   }
 }
 
@@ -394,9 +406,9 @@ METHODDEF(void)
 fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
 			    JSAMPARRAY input_data, JSAMPARRAY output_data)
 {
-  int outrow;
+  int inrow;
   JDIMENSION colctr;
-  JDIMENSION output_cols = compptr->width_in_blocks * DCTSIZE;
+  JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size;
   register JSAMPROW inptr, above_ptr, below_ptr, outptr;
   INT32 membersum, neighsum, memberscale, neighscale;
   int colsum, lastcolsum, nextcolsum;
@@ -417,11 +429,11 @@ fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr,
   memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */
   neighscale = cinfo->smoothing_factor * 64; /* scaled SF */
 
-  for (outrow = 0; outrow < compptr->v_samp_factor; outrow++) {
-    outptr = output_data[outrow];
-    inptr = input_data[outrow];
-    above_ptr = input_data[outrow-1];
-    below_ptr = input_data[outrow+1];
+  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
+    outptr = output_data[inrow];
+    inptr = input_data[inrow];
+    above_ptr = input_data[inrow-1];
+    below_ptr = input_data[inrow+1];
 
     /* Special case for first column */
     colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) +
@@ -469,6 +481,7 @@ jinit_downsampler (j_compress_ptr cinfo)
   int ci;
   jpeg_component_info * compptr;
   boolean smoothok = TRUE;
+  int h_in_group, v_in_group, h_out_group, v_out_group;
 
   downsample = (my_downsample_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
@@ -484,8 +497,17 @@ jinit_downsampler (j_compress_ptr cinfo)
   /* Verify we can handle the sampling factors, and set up method pointers */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    if (compptr->h_samp_factor == cinfo->max_h_samp_factor &&
-	compptr->v_samp_factor == cinfo->max_v_samp_factor) {
+    /* Compute size of an "output group" for DCT scaling.  This many samples
+     * are to be converted from max_h_samp_factor * max_v_samp_factor pixels.
+     */
+    h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) /
+		  cinfo->min_DCT_h_scaled_size;
+    v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		  cinfo->min_DCT_v_scaled_size;
+    h_in_group = cinfo->max_h_samp_factor;
+    v_in_group = cinfo->max_v_samp_factor;
+    downsample->rowgroup_height[ci] = v_out_group; /* save for use later */
+    if (h_in_group == h_out_group && v_in_group == v_out_group) {
 #ifdef INPUT_SMOOTHING_SUPPORTED
       if (cinfo->smoothing_factor) {
 	downsample->methods[ci] = fullsize_smooth_downsample;
@@ -493,29 +515,25 @@ jinit_downsampler (j_compress_ptr cinfo)
       } else
 #endif
 	downsample->methods[ci] = fullsize_downsample;
-    } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
-	       compptr->v_samp_factor == cinfo->max_v_samp_factor) {
+    } else if (h_in_group == h_out_group * 2 &&
+	       v_in_group == v_out_group) {
       smoothok = FALSE;
-      if (jsimd_can_h2v1_downsample())
-        downsample->methods[ci] = jsimd_h2v1_downsample;
-      else
-        downsample->methods[ci] = h2v1_downsample;
-    } else if (compptr->h_samp_factor * 2 == cinfo->max_h_samp_factor &&
-	       compptr->v_samp_factor * 2 == cinfo->max_v_samp_factor) {
+      downsample->methods[ci] = h2v1_downsample;
+    } else if (h_in_group == h_out_group * 2 &&
+	       v_in_group == v_out_group * 2) {
 #ifdef INPUT_SMOOTHING_SUPPORTED
       if (cinfo->smoothing_factor) {
 	downsample->methods[ci] = h2v2_smooth_downsample;
 	downsample->pub.need_context_rows = TRUE;
       } else
 #endif
-	if (jsimd_can_h2v2_downsample())
-	  downsample->methods[ci] = jsimd_h2v2_downsample;
-	else
-	  downsample->methods[ci] = h2v2_downsample;
-    } else if ((cinfo->max_h_samp_factor % compptr->h_samp_factor) == 0 &&
-	       (cinfo->max_v_samp_factor % compptr->v_samp_factor) == 0) {
+	downsample->methods[ci] = h2v2_downsample;
+    } else if ((h_in_group % h_out_group) == 0 &&
+	       (v_in_group % v_out_group) == 0) {
       smoothok = FALSE;
       downsample->methods[ci] = int_downsample;
+      downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group);
+      downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group);
     } else
       ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
   }

jctrans.c

@@ -2,6 +2,7 @@
  * jctrans.c
  *
  * Copyright (C) 1995-1998, Thomas G. Lane.
+ * Modified 2000-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -76,13 +77,23 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
   dstinfo->image_height = srcinfo->image_height;
   dstinfo->input_components = srcinfo->num_components;
   dstinfo->in_color_space = srcinfo->jpeg_color_space;
+  dstinfo->jpeg_width = srcinfo->output_width;
+  dstinfo->jpeg_height = srcinfo->output_height;
+  dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size;
+  dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size;
   /* Initialize all parameters to default values */
   jpeg_set_defaults(dstinfo);
   /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB.
    * Fix it to get the right header markers for the image colorspace.
+   * Note: Entropy table assignment in jpeg_set_colorspace
+   * depends on color_transform.
+   * Adaption is also required for setting the appropriate
+   * entropy coding mode dependent on image data precision.
    */
+  dstinfo->color_transform = srcinfo->color_transform;
   jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space);
   dstinfo->data_precision = srcinfo->data_precision;
+  dstinfo->arith_code = srcinfo->data_precision > 8 ? TRUE : FALSE;
   dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling;
   /* Copy the source's quantization tables. */
   for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
@@ -125,7 +136,7 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
 	  ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno);
       }
     }
-    /* Note: we do not copy the source's Huffman table assignments;
+    /* Note: we do not copy the source's entropy table assignments;
      * instead we rely on jpeg_set_colorspace to have made a suitable choice.
      */
   }
@@ -135,10 +146,10 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
    * if the application chooses to copy JFIF 1.02 extension markers from
    * the source file, we need to copy the version to make sure we don't
    * emit a file that has 1.02 extensions but a claimed version of 1.01.
-   * We will *not*, however, copy version info from mislabeled "2.01" files.
    */
   if (srcinfo->saw_JFIF_marker) {
-    if (srcinfo->JFIF_major_version == 1) {
+    if (srcinfo->JFIF_major_version == 1 ||
+	srcinfo->JFIF_major_version == 2) {
       dstinfo->JFIF_major_version = srcinfo->JFIF_major_version;
       dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version;
     }
@@ -149,6 +160,18 @@ jpeg_copy_critical_parameters (j_decompress_ptr srcinfo,
 }
 
 
+LOCAL(void)
+jpeg_calc_trans_dimensions (j_compress_ptr cinfo)
+/* Do computations that are needed before master selection phase */
+{
+  if (cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size)
+    ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	     cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size);
+
+  cinfo->block_size = cinfo->min_DCT_h_scaled_size;
+}
+
+
 /*
  * Master selection of compression modules for transcoding.
  * This substitutes for jcinit.c's initialization of the full compressor.
@@ -158,25 +181,17 @@ LOCAL(void)
 transencode_master_selection (j_compress_ptr cinfo,
 			      jvirt_barray_ptr * coef_arrays)
 {
-  /* Although we don't actually use input_components for transcoding,
-   * jcmaster.c's initial_setup will complain if input_components is 0.
-   */
-  cinfo->input_components = 1;
+  /* Do computations that are needed before master selection phase */
+  jpeg_calc_trans_dimensions(cinfo);
+
   /* Initialize master control (includes parameter checking/processing) */
   jinit_c_master_control(cinfo, TRUE /* transcode only */);
 
   /* Entropy encoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef C_PROGRESSIVE_SUPPORTED
-      jinit_phuff_encoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
-      jinit_huff_encoder(cinfo);
+  if (cinfo->arith_code)
+    jinit_arith_encoder(cinfo);
+  else {
+    jinit_huff_encoder(cinfo);
   }
 
   /* We need a special coefficient buffer controller. */
@@ -370,7 +385,7 @@ transencode_coef_controller (j_compress_ptr cinfo,
   coef = (my_coef_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_coef_controller));
-  cinfo->coef = (struct jpeg_c_coef_controller *) coef;
+  cinfo->coef = &coef->pub;
   coef->pub.start_pass = start_pass_coef;
   coef->pub.compress_data = compress_output;
 
@@ -381,7 +396,7 @@ transencode_coef_controller (j_compress_ptr cinfo,
   buffer = (JBLOCKROW)
     (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
-  jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
+  FMEMZERO((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK));
   for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) {
     coef->dummy_buffer[i] = buffer + i;
   }

jdapimin.c

@@ -2,6 +2,7 @@
  * jdapimin.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -113,8 +114,9 @@ jpeg_abort_decompress (j_decompress_ptr cinfo)
 LOCAL(void)
 default_decompress_parms (j_decompress_ptr cinfo)
 {
+  int cid0, cid1, cid2;
+
   /* Guess the input colorspace, and set output colorspace accordingly. */
-  /* (Wish JPEG committee had provided a real way to specify this...) */
   /* Note application may override our guesses. */
   switch (cinfo->num_components) {
   case 1:
@@ -123,9 +125,22 @@ default_decompress_parms (j_decompress_ptr cinfo)
     break;
     
   case 3:
-    if (cinfo->saw_JFIF_marker) {
-      cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */
-    } else if (cinfo->saw_Adobe_marker) {
+    cid0 = cinfo->comp_info[0].component_id;
+    cid1 = cinfo->comp_info[1].component_id;
+    cid2 = cinfo->comp_info[2].component_id;
+
+    /* First try to guess from the component IDs */
+    if      (cid0 == 0x01 && cid1 == 0x02 && cid2 == 0x03)
+      cinfo->jpeg_color_space = JCS_YCbCr;
+    else if (cid0 == 0x01 && cid1 == 0x22 && cid2 == 0x23)
+      cinfo->jpeg_color_space = JCS_BG_YCC;
+    else if (cid0 == 0x52 && cid1 == 0x47 && cid2 == 0x42)
+      cinfo->jpeg_color_space = JCS_RGB;	/* ASCII 'R', 'G', 'B' */
+    else if (cid0 == 0x72 && cid1 == 0x67 && cid2 == 0x62)
+      cinfo->jpeg_color_space = JCS_BG_RGB;	/* ASCII 'r', 'g', 'b' */
+    else if (cinfo->saw_JFIF_marker)
+      cinfo->jpeg_color_space = JCS_YCbCr;	/* assume it's YCbCr */
+    else if (cinfo->saw_Adobe_marker) {
       switch (cinfo->Adobe_transform) {
       case 0:
 	cinfo->jpeg_color_space = JCS_RGB;
@@ -135,23 +150,12 @@ default_decompress_parms (j_decompress_ptr cinfo)
 	break;
       default:
 	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
+	cinfo->jpeg_color_space = JCS_YCbCr;	/* assume it's YCbCr */
 	break;
       }
     } else {
-      /* Saw no special markers, try to guess from the component IDs */
-      int cid0 = cinfo->comp_info[0].component_id;
-      int cid1 = cinfo->comp_info[1].component_id;
-      int cid2 = cinfo->comp_info[2].component_id;
-
-      if (cid0 == 1 && cid1 == 2 && cid2 == 3)
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */
-      else if (cid0 == 82 && cid1 == 71 && cid2 == 66)
-	cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */
-      else {
-	TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
-	cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */
-      }
+      TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2);
+      cinfo->jpeg_color_space = JCS_YCbCr;	/* assume it's YCbCr */
     }
     /* Always guess RGB is proper output colorspace. */
     cinfo->out_color_space = JCS_RGB;
@@ -168,7 +172,7 @@ default_decompress_parms (j_decompress_ptr cinfo)
 	break;
       default:
 	WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform);
-	cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */
+	cinfo->jpeg_color_space = JCS_YCCK;	/* assume it's YCCK */
 	break;
       }
     } else {
@@ -185,8 +189,8 @@ default_decompress_parms (j_decompress_ptr cinfo)
   }
 
   /* Set defaults for other decompression parameters. */
-  cinfo->scale_num = 1;		/* 1:1 scaling */
-  cinfo->scale_denom = 1;
+  cinfo->scale_num = cinfo->block_size;		/* 1:1 scaling */
+  cinfo->scale_denom = cinfo->block_size;
   cinfo->output_gamma = 1.0;
   cinfo->buffered_image = FALSE;
   cinfo->raw_data_out = FALSE;

jdapistd.c

@@ -2,6 +2,7 @@
  * jdapistd.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -202,7 +203,7 @@ jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data,
   }
 
   /* Verify that at least one iMCU row can be returned. */
-  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size;
+  lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size;
   if (max_lines < lines_per_iMCU_row)
     ERREXIT(cinfo, JERR_BUFFER_SIZE);
 

jdarith.c

@@ -0,0 +1,796 @@
+/*
+ * jdarith.c
+ *
+ * Developed 1997-2015 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains portable arithmetic entropy decoding routines for JPEG
+ * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81).
+ *
+ * Both sequential and progressive modes are supported in this single module.
+ *
+ * Suspension is not currently supported in this module.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+
+
+/* Expanded entropy decoder object for arithmetic decoding. */
+
+typedef struct {
+  struct jpeg_entropy_decoder pub; /* public fields */
+
+  INT32 c;       /* C register, base of coding interval + input bit buffer */
+  INT32 a;               /* A register, normalized size of coding interval */
+  int ct;     /* bit shift counter, # of bits left in bit buffer part of C */
+                                                         /* init: ct = -16 */
+                                                         /* run: ct = 0..7 */
+                                                         /* error: ct = -1 */
+  int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */
+  int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */
+
+  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
+
+  /* Pointers to statistics areas (these workspaces have image lifespan) */
+  unsigned char * dc_stats[NUM_ARITH_TBLS];
+  unsigned char * ac_stats[NUM_ARITH_TBLS];
+
+  /* Statistics bin for coding with fixed probability 0.5 */
+  unsigned char fixed_bin[4];
+} arith_entropy_decoder;
+
+typedef arith_entropy_decoder * arith_entropy_ptr;
+
+/* The following two definitions specify the allocation chunk size
+ * for the statistics area.
+ * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least
+ * 49 statistics bins for DC, and 245 statistics bins for AC coding.
+ *
+ * We use a compact representation with 1 byte per statistics bin,
+ * thus the numbers directly represent byte sizes.
+ * This 1 byte per statistics bin contains the meaning of the MPS
+ * (more probable symbol) in the highest bit (mask 0x80), and the
+ * index into the probability estimation state machine table
+ * in the lower bits (mask 0x7F).
+ */
+
+#define DC_STAT_BINS 64
+#define AC_STAT_BINS 256
+
+
+LOCAL(int)
+get_byte (j_decompress_ptr cinfo)
+/* Read next input byte; we do not support suspension in this module. */
+{
+  struct jpeg_source_mgr * src = cinfo->src;
+
+  if (src->bytes_in_buffer == 0)
+    if (! (*src->fill_input_buffer) (cinfo))
+      ERREXIT(cinfo, JERR_CANT_SUSPEND);
+  src->bytes_in_buffer--;
+  return GETJOCTET(*src->next_input_byte++);
+}
+
+
+/*
+ * The core arithmetic decoding routine (common in JPEG and JBIG).
+ * This needs to go as fast as possible.
+ * Machine-dependent optimization facilities
+ * are not utilized in this portable implementation.
+ * However, this code should be fairly efficient and
+ * may be a good base for further optimizations anyway.
+ *
+ * Return value is 0 or 1 (binary decision).
+ *
+ * Note: I've changed the handling of the code base & bit
+ * buffer register C compared to other implementations
+ * based on the standards layout & procedures.
+ * While it also contains both the actual base of the
+ * coding interval (16 bits) and the next-bits buffer,
+ * the cut-point between these two parts is floating
+ * (instead of fixed) with the bit shift counter CT.
+ * Thus, we also need only one (variable instead of
+ * fixed size) shift for the LPS/MPS decision, and
+ * we can do away with any renormalization update
+ * of C (except for new data insertion, of course).
+ *
+ * I've also introduced a new scheme for accessing
+ * the probability estimation state machine table,
+ * derived from Markus Kuhn's JBIG implementation.
+ */
+
+LOCAL(int)
+arith_decode (j_decompress_ptr cinfo, unsigned char *st)
+{
+  register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy;
+  register unsigned char nl, nm;
+  register INT32 qe, temp;
+  register int sv, data;
+
+  /* Renormalization & data input per section D.2.6 */
+  while (e->a < 0x8000L) {
+    if (--e->ct < 0) {
+      /* Need to fetch next data byte */
+      if (cinfo->unread_marker)
+	data = 0;		/* stuff zero data */
+      else {
+	data = get_byte(cinfo);	/* read next input byte */
+	if (data == 0xFF) {	/* zero stuff or marker code */
+	  do data = get_byte(cinfo);
+	  while (data == 0xFF);	/* swallow extra 0xFF bytes */
+	  if (data == 0)
+	    data = 0xFF;	/* discard stuffed zero byte */
+	  else {
+	    /* Note: Different from the Huffman decoder, hitting
+	     * a marker while processing the compressed data
+	     * segment is legal in arithmetic coding.
+	     * The convention is to supply zero data
+	     * then until decoding is complete.
+	     */
+	    cinfo->unread_marker = data;
+	    data = 0;
+	  }
+	}
+      }
+      e->c = (e->c << 8) | data; /* insert data into C register */
+      if ((e->ct += 8) < 0)	 /* update bit shift counter */
+	/* Need more initial bytes */
+	if (++e->ct == 0)
+	  /* Got 2 initial bytes -> re-init A and exit loop */
+	  e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */
+    }
+    e->a <<= 1;
+  }
+
+  /* Fetch values from our compact representation of Table D.3(D.2):
+   * Qe values and probability estimation state machine
+   */
+  sv = *st;
+  qe = jpeg_aritab[sv & 0x7F];	/* => Qe_Value */
+  nl = qe & 0xFF; qe >>= 8;	/* Next_Index_LPS + Switch_MPS */
+  nm = qe & 0xFF; qe >>= 8;	/* Next_Index_MPS */
+
+  /* Decode & estimation procedures per sections D.2.4 & D.2.5 */
+  temp = e->a - qe;
+  e->a = temp;
+  temp <<= e->ct;
+  if (e->c >= temp) {
+    e->c -= temp;
+    /* Conditional LPS (less probable symbol) exchange */
+    if (e->a < qe) {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    } else {
+      e->a = qe;
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    }
+  } else if (e->a < 0x8000L) {
+    /* Conditional MPS (more probable symbol) exchange */
+    if (e->a < qe) {
+      *st = (sv & 0x80) ^ nl;	/* Estimate_after_LPS */
+      sv ^= 0x80;		/* Exchange LPS/MPS */
+    } else {
+      *st = (sv & 0x80) ^ nm;	/* Estimate_after_MPS */
+    }
+  }
+
+  return sv >> 7;
+}
+
+
+/*
+ * Check for a restart marker & resynchronize decoder.
+ */
+
+LOCAL(void)
+process_restart (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci;
+  jpeg_component_info * compptr;
+
+  /* Advance past the RSTn marker */
+  if (! (*cinfo->marker->read_restart_marker) (cinfo))
+    ERREXIT(cinfo, JERR_CANT_SUSPEND);
+
+  /* Re-initialize statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS);
+      /* Reset DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if ((! cinfo->progressive_mode && cinfo->lim_Se) ||
+	(cinfo->progressive_mode && cinfo->Ss)) {
+      MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS);
+    }
+  }
+
+  /* Reset arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Reset restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Arithmetic MCU decoding.
+ * Each of these routines decodes and returns one MCU's worth of
+ * arithmetic-compressed coefficients.
+ * The coefficients are reordered from zigzag order into natural array order,
+ * but are not dequantized.
+ *
+ * The i'th block of the MCU is stored into the block pointed to by
+ * MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
+ */
+
+/*
+ * MCU decoding for DC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign;
+  int v, m;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    tbl = cinfo->cur_comp_info[ci]->dc_tbl_no;
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */
+    (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC initial scan (either spectral selection,
+ * or first pass of successive approximation).
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  unsigned char *st;
+  int tbl, sign, k;
+  int v, m;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+  /* Figure F.20: Decode_AC_coefficients */
+  k = cinfo->Ss - 1;
+  do {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    if (arith_decode(cinfo, st)) break;		/* EOB flag */
+    for (;;) {
+      k++;
+      if (arith_decode(cinfo, st + 1)) break;
+      st += 3;
+      if (k >= cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+    /* Figure F.21: Decoding nonzero value v */
+    /* Figure F.22: Decoding the sign of v */
+    sign = arith_decode(cinfo, entropy->fixed_bin);
+    st += 2;
+    /* Figure F.23: Decoding the magnitude category of v */
+    if ((m = arith_decode(cinfo, st)) != 0) {
+      if (arith_decode(cinfo, st)) {
+	m <<= 1;
+	st = entropy->ac_stats[tbl] +
+	     (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+    }
+    v = m;
+    /* Figure F.24: Decoding the magnitude bit pattern of v */
+    st += 14;
+    while (m >>= 1)
+      if (arith_decode(cinfo, st)) v |= m;
+    v += 1; if (sign) v = -v;
+    /* Scale and output coefficient in natural (dezigzagged) order */
+    (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al);
+  } while (k < cinfo->Se);
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for DC successive approximation refinement scan.
+ * Note: we assume such scans can be multi-component,
+ * although the spec is not very clear on the point.
+ */
+
+METHODDEF(boolean)
+decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  unsigned char *st;
+  int p1, blkn;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  st = entropy->fixed_bin;	/* use fixed probability estimation */
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    /* Encoded data is simply the next bit of the two's-complement DC value */
+    if (arith_decode(cinfo, st))
+      MCU_data[blkn][0][0] |= p1;
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * MCU decoding for AC successive approximation refinement scan.
+ */
+
+METHODDEF(boolean)
+decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  JBLOCKROW block;
+  JCOEFPTR thiscoef;
+  unsigned char *st;
+  int tbl, k, kex;
+  int p1, m1;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* There is always only one block per MCU */
+  block = MCU_data[0];
+  tbl = cinfo->cur_comp_info[0]->ac_tbl_no;
+
+  p1 = 1 << cinfo->Al;		/* 1 in the bit position being coded */
+  m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
+
+  /* Establish EOBx (previous stage end-of-block) index */
+  kex = cinfo->Se;
+  do {
+    if ((*block)[natural_order[kex]]) break;
+  } while (--kex);
+
+  k = cinfo->Ss - 1;
+  do {
+    st = entropy->ac_stats[tbl] + 3 * k;
+    if (k >= kex)
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+    for (;;) {
+      thiscoef = *block + natural_order[++k];
+      if (*thiscoef) {				/* previously nonzero coef */
+	if (arith_decode(cinfo, st + 2)) {
+	  if (*thiscoef < 0)
+	    *thiscoef += m1;
+	  else
+	    *thiscoef += p1;
+	}
+	break;
+      }
+      if (arith_decode(cinfo, st + 1)) {	/* newly nonzero coef */
+	if (arith_decode(cinfo, entropy->fixed_bin))
+	  *thiscoef = m1;
+	else
+	  *thiscoef = p1;
+	break;
+      }
+      st += 3;
+      if (k >= cinfo->Se) {
+	WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	entropy->ct = -1;			/* spectral overflow */
+	return TRUE;
+      }
+    }
+  } while (k < cinfo->Se);
+
+  return TRUE;
+}
+
+
+/*
+ * Decode one MCU's worth of arithmetic-compressed coefficients.
+ */
+
+METHODDEF(boolean)
+decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  jpeg_component_info * compptr;
+  JBLOCKROW block;
+  unsigned char *st;
+  int blkn, ci, tbl, sign, k;
+  int v, m;
+  const int * natural_order;
+
+  /* Process restart marker if needed */
+  if (cinfo->restart_interval) {
+    if (entropy->restarts_to_go == 0)
+      process_restart(cinfo);
+    entropy->restarts_to_go--;
+  }
+
+  if (entropy->ct == -1) return TRUE;	/* if error do nothing */
+
+  natural_order = cinfo->natural_order;
+
+  /* Outer loop handles each block in the MCU */
+
+  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
+    block = MCU_data[blkn];
+    ci = cinfo->MCU_membership[blkn];
+    compptr = cinfo->cur_comp_info[ci];
+
+    /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */
+
+    tbl = compptr->dc_tbl_no;
+
+    /* Table F.4: Point to statistics bin S0 for DC coefficient coding */
+    st = entropy->dc_stats[tbl] + entropy->dc_context[ci];
+
+    /* Figure F.19: Decode_DC_DIFF */
+    if (arith_decode(cinfo, st) == 0)
+      entropy->dc_context[ci] = 0;
+    else {
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, st + 1);
+      st += 2; st += sign;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	st = entropy->dc_stats[tbl] + 20;	/* Table F.4: X1 = 20 */
+	while (arith_decode(cinfo, st)) {
+	  if ((m <<= 1) == 0x8000) {
+	    WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	    entropy->ct = -1;			/* magnitude overflow */
+	    return TRUE;
+	  }
+	  st += 1;
+	}
+      }
+      /* Section F.1.4.4.1.2: Establish dc_context conditioning category */
+      if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1))
+	entropy->dc_context[ci] = 0;		   /* zero diff category */
+      else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1))
+	entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */
+      else
+	entropy->dc_context[ci] = 4 + (sign * 4);  /* small diff category */
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      entropy->last_dc_val[ci] += v;
+    }
+
+    (*block)[0] = (JCOEF) entropy->last_dc_val[ci];
+
+    /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */
+
+    if (cinfo->lim_Se == 0) continue;
+    tbl = compptr->ac_tbl_no;
+    k = 0;
+
+    /* Figure F.20: Decode_AC_coefficients */
+    do {
+      st = entropy->ac_stats[tbl] + 3 * k;
+      if (arith_decode(cinfo, st)) break;	/* EOB flag */
+      for (;;) {
+	k++;
+	if (arith_decode(cinfo, st + 1)) break;
+	st += 3;
+	if (k >= cinfo->lim_Se) {
+	  WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	  entropy->ct = -1;			/* spectral overflow */
+	  return TRUE;
+	}
+      }
+      /* Figure F.21: Decoding nonzero value v */
+      /* Figure F.22: Decoding the sign of v */
+      sign = arith_decode(cinfo, entropy->fixed_bin);
+      st += 2;
+      /* Figure F.23: Decoding the magnitude category of v */
+      if ((m = arith_decode(cinfo, st)) != 0) {
+	if (arith_decode(cinfo, st)) {
+	  m <<= 1;
+	  st = entropy->ac_stats[tbl] +
+	       (k <= cinfo->arith_ac_K[tbl] ? 189 : 217);
+	  while (arith_decode(cinfo, st)) {
+	    if ((m <<= 1) == 0x8000) {
+	      WARNMS(cinfo, JWRN_ARITH_BAD_CODE);
+	      entropy->ct = -1;			/* magnitude overflow */
+	      return TRUE;
+	    }
+	    st += 1;
+	  }
+	}
+      }
+      v = m;
+      /* Figure F.24: Decoding the magnitude bit pattern of v */
+      st += 14;
+      while (m >>= 1)
+	if (arith_decode(cinfo, st)) v |= m;
+      v += 1; if (sign) v = -v;
+      (*block)[natural_order[k]] = (JCOEF) v;
+    } while (k < cinfo->lim_Se);
+  }
+
+  return TRUE;
+}
+
+
+/*
+ * Initialize for an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+start_pass (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy;
+  int ci, tbl;
+  jpeg_component_info * compptr;
+
+  if (cinfo->progressive_mode) {
+    /* Validate progressive scan parameters */
+    if (cinfo->Ss == 0) {
+      if (cinfo->Se != 0)
+	goto bad;
+    } else {
+      /* need not check Ss/Se < 0 since they came from unsigned bytes */
+      if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se)
+	goto bad;
+      /* AC scans may have only one component */
+      if (cinfo->comps_in_scan != 1)
+	goto bad;
+    }
+    if (cinfo->Ah != 0) {
+      /* Successive approximation refinement scan: must have Al = Ah-1. */
+      if (cinfo->Ah-1 != cinfo->Al)
+	goto bad;
+    }
+    if (cinfo->Al > 13) {	/* need not check for < 0 */
+      bad:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+    }
+    /* Update progression status, and verify that scan order is legal.
+     * Note that inter-scan inconsistencies are treated as warnings
+     * not fatal errors ... not clear if this is right way to behave.
+     */
+    for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+      int coefi, cindex = cinfo->cur_comp_info[ci]->component_index;
+      int *coef_bit_ptr = & cinfo->coef_bits[cindex][0];
+      if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
+	WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
+      for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
+	int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
+	if (cinfo->Ah != expected)
+	  WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
+	coef_bit_ptr[coefi] = cinfo->Al;
+      }
+    }
+    /* Select MCU decoding routine */
+    if (cinfo->Ah == 0) {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_first;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_first;
+    } else {
+      if (cinfo->Ss == 0)
+	entropy->pub.decode_mcu = decode_mcu_DC_refine;
+      else
+	entropy->pub.decode_mcu = decode_mcu_AC_refine;
+    }
+  } else {
+    /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG.
+     * This ought to be an error condition, but we make it a warning.
+     */
+    if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 ||
+	(cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se))
+      WARNMS(cinfo, JWRN_NOT_SEQUENTIAL);
+    /* Select MCU decoding routine */
+    entropy->pub.decode_mcu = decode_mcu;
+  }
+
+  /* Allocate & initialize requested statistics areas */
+  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
+    compptr = cinfo->cur_comp_info[ci];
+    if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) {
+      tbl = compptr->dc_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->dc_stats[tbl] == NULL)
+	entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS);
+      MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS);
+      /* Initialize DC predictions to 0 */
+      entropy->last_dc_val[ci] = 0;
+      entropy->dc_context[ci] = 0;
+    }
+    if ((! cinfo->progressive_mode && cinfo->lim_Se) ||
+	(cinfo->progressive_mode && cinfo->Ss)) {
+      tbl = compptr->ac_tbl_no;
+      if (tbl < 0 || tbl >= NUM_ARITH_TBLS)
+	ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl);
+      if (entropy->ac_stats[tbl] == NULL)
+	entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small)
+	  ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS);
+      MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS);
+    }
+  }
+
+  /* Initialize arithmetic decoding variables */
+  entropy->c = 0;
+  entropy->a = 0;
+  entropy->ct = -16;	/* force reading 2 initial bytes to fill C */
+
+  /* Initialize restart counter */
+  entropy->restarts_to_go = cinfo->restart_interval;
+}
+
+
+/*
+ * Finish up at the end of an arithmetic-compressed scan.
+ */
+
+METHODDEF(void)
+finish_pass (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
+
+/*
+ * Module initialization routine for arithmetic entropy decoding.
+ */
+
+GLOBAL(void)
+jinit_arith_decoder (j_decompress_ptr cinfo)
+{
+  arith_entropy_ptr entropy;
+  int i;
+
+  entropy = (arith_entropy_ptr)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				SIZEOF(arith_entropy_decoder));
+  cinfo->entropy = &entropy->pub;
+  entropy->pub.start_pass = start_pass;
+  entropy->pub.finish_pass = finish_pass;
+
+  /* Mark tables unallocated */
+  for (i = 0; i < NUM_ARITH_TBLS; i++) {
+    entropy->dc_stats[i] = NULL;
+    entropy->ac_stats[i] = NULL;
+  }
+
+  /* Initialize index for fixed probability estimation */
+  entropy->fixed_bin[0] = 113;
+
+  if (cinfo->progressive_mode) {
+    /* Create progression status table */
+    int *coef_bit_ptr, ci;
+    cinfo->coef_bits = (int (*)[DCTSIZE2])
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				  cinfo->num_components*DCTSIZE2*SIZEOF(int));
+    coef_bit_ptr = & cinfo->coef_bits[0][0];
+    for (ci = 0; ci < cinfo->num_components; ci++) 
+      for (i = 0; i < DCTSIZE2; i++)
+	*coef_bit_ptr++ = -1;
+  }
+}

jdatadst.c

@@ -2,13 +2,14 @@
  * jdatadst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains compression data destination routines for the case of
- * emitting JPEG data to a file (or any stdio stream).  While these routines
- * are sufficient for most applications, some will want to use a different
- * destination manager.
+ * emitting JPEG data to memory or to a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different destination manager.
  * IMPORTANT: we assume that fwrite() will correctly transcribe an array of
  * JOCTETs into 8-bit-wide elements on external storage.  If char is wider
  * than 8 bits on your machine, you may need to do some tweaking.
@@ -19,6 +20,11 @@
 #include "jpeglib.h"
 #include "jerror.h"
 
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
 
 /* Expanded data destination object for stdio output */
 
@@ -34,6 +40,21 @@ typedef my_destination_mgr * my_dest_ptr;
 #define OUTPUT_BUF_SIZE  4096	/* choose an efficiently fwrite'able size */
 
 
+/* Expanded data destination object for memory output */
+
+typedef struct {
+  struct jpeg_destination_mgr pub; /* public fields */
+
+  unsigned char ** outbuffer;	/* target buffer */
+  unsigned long * outsize;
+  unsigned char * newbuffer;	/* newly allocated buffer */
+  JOCTET * buffer;		/* start of buffer */
+  size_t bufsize;
+} my_mem_destination_mgr;
+
+typedef my_mem_destination_mgr * my_mem_dest_ptr;
+
+
 /*
  * Initialize destination --- called by jpeg_start_compress
  * before any data is actually written.
@@ -53,6 +74,12 @@ init_destination (j_compress_ptr cinfo)
   dest->pub.free_in_buffer = OUTPUT_BUF_SIZE;
 }
 
+METHODDEF(void)
+init_mem_destination (j_compress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
 
 /*
  * Empty the output buffer --- called whenever buffer fills up.
@@ -92,6 +119,36 @@ empty_output_buffer (j_compress_ptr cinfo)
   return TRUE;
 }
 
+METHODDEF(boolean)
+empty_mem_output_buffer (j_compress_ptr cinfo)
+{
+  size_t nextsize;
+  JOCTET * nextbuffer;
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  /* Try to allocate new buffer with double size */
+  nextsize = dest->bufsize * 2;
+  nextbuffer = (JOCTET *) malloc(nextsize);
+
+  if (nextbuffer == NULL)
+    ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+
+  MEMCOPY(nextbuffer, dest->buffer, dest->bufsize);
+
+  if (dest->newbuffer != NULL)
+    free(dest->newbuffer);
+
+  dest->newbuffer = nextbuffer;
+
+  dest->pub.next_output_byte = nextbuffer + dest->bufsize;
+  dest->pub.free_in_buffer = dest->bufsize;
+
+  dest->buffer = nextbuffer;
+  dest->bufsize = nextsize;
+
+  return TRUE;
+}
+
 
 /*
  * Terminate destination --- called by jpeg_finish_compress
@@ -113,12 +170,21 @@ term_destination (j_compress_ptr cinfo)
     if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount)
       ERREXIT(cinfo, JERR_FILE_WRITE);
   }
-  fflush(dest->outfile);
+  JFFLUSH(dest->outfile);
   /* Make sure we wrote the output file OK */
-  if (ferror(dest->outfile))
+  if (JFERROR(dest->outfile))
     ERREXIT(cinfo, JERR_FILE_WRITE);
 }
 
+METHODDEF(void)
+term_mem_destination (j_compress_ptr cinfo)
+{
+  my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest;
+
+  *dest->outbuffer = dest->buffer;
+  *dest->outsize = dest->bufsize - dest->pub.free_in_buffer;
+}
+
 
 /*
  * Prepare for output to a stdio stream.
@@ -149,3 +215,56 @@ jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile)
   dest->pub.term_destination = term_destination;
   dest->outfile = outfile;
 }
+
+
+/*
+ * Prepare for output to a memory buffer.
+ * The caller may supply an own initial buffer with appropriate size.
+ * Otherwise, or when the actual data output exceeds the given size,
+ * the library adapts the buffer size as necessary.
+ * The standard library functions malloc/free are used for allocating
+ * larger memory, so the buffer is available to the application after
+ * finishing compression, and then the application is responsible for
+ * freeing the requested memory.
+ * Note:  An initial buffer supplied by the caller is expected to be
+ * managed by the application.  The library does not free such buffer
+ * when allocating a larger buffer.
+ */
+
+GLOBAL(void)
+jpeg_mem_dest (j_compress_ptr cinfo,
+	       unsigned char ** outbuffer, unsigned long * outsize)
+{
+  my_mem_dest_ptr dest;
+
+  if (outbuffer == NULL || outsize == NULL)	/* sanity check */
+    ERREXIT(cinfo, JERR_BUFFER_SIZE);
+
+  /* The destination object is made permanent so that multiple JPEG images
+   * can be written to the same buffer without re-executing jpeg_mem_dest.
+   */
+  if (cinfo->dest == NULL) {	/* first time for this JPEG object? */
+    cinfo->dest = (struct jpeg_destination_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(my_mem_destination_mgr));
+  }
+
+  dest = (my_mem_dest_ptr) cinfo->dest;
+  dest->pub.init_destination = init_mem_destination;
+  dest->pub.empty_output_buffer = empty_mem_output_buffer;
+  dest->pub.term_destination = term_mem_destination;
+  dest->outbuffer = outbuffer;
+  dest->outsize = outsize;
+  dest->newbuffer = NULL;
+
+  if (*outbuffer == NULL || *outsize == 0) {
+    /* Allocate initial buffer */
+    dest->newbuffer = *outbuffer = (unsigned char *) malloc(OUTPUT_BUF_SIZE);
+    if (dest->newbuffer == NULL)
+      ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10);
+    *outsize = OUTPUT_BUF_SIZE;
+  }
+
+  dest->pub.next_output_byte = dest->buffer = *outbuffer;
+  dest->pub.free_in_buffer = dest->bufsize = *outsize;
+}

jdatasrc.c

@@ -2,13 +2,14 @@
  * jdatasrc.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2009-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains decompression data source routines for the case of
- * reading JPEG data from a file (or any stdio stream).  While these routines
- * are sufficient for most applications, some will want to use a different
- * source manager.
+ * reading JPEG data from memory or from a file (or any stdio stream).
+ * While these routines are sufficient for most applications,
+ * some will want to use a different source manager.
  * IMPORTANT: we assume that fread() will correctly transcribe an array of
  * JOCTETs from 8-bit-wide elements on external storage.  If char is wider
  * than 8 bits on your machine, you may need to do some tweaking.
@@ -52,6 +53,12 @@ init_source (j_decompress_ptr cinfo)
   src->start_of_file = TRUE;
 }
 
+METHODDEF(void)
+init_mem_source (j_decompress_ptr cinfo)
+{
+  /* no work necessary here */
+}
+
 
 /*
  * Fill the input buffer --- called whenever buffer is emptied.
@@ -111,6 +118,27 @@ fill_input_buffer (j_decompress_ptr cinfo)
   return TRUE;
 }
 
+METHODDEF(boolean)
+fill_mem_input_buffer (j_decompress_ptr cinfo)
+{
+  static const JOCTET mybuffer[4] = {
+    (JOCTET) 0xFF, (JOCTET) JPEG_EOI, 0, 0
+  };
+
+  /* The whole JPEG data is expected to reside in the supplied memory
+   * buffer, so any request for more data beyond the given buffer size
+   * is treated as an error.
+   */
+  WARNMS(cinfo, JWRN_JPEG_EOF);
+
+  /* Insert a fake EOI marker */
+
+  cinfo->src->next_input_byte = mybuffer;
+  cinfo->src->bytes_in_buffer = 2;
+
+  return TRUE;
+}
+
 
 /*
  * Skip data --- used to skip over a potentially large amount of
@@ -127,22 +155,22 @@ fill_input_buffer (j_decompress_ptr cinfo)
 METHODDEF(void)
 skip_input_data (j_decompress_ptr cinfo, long num_bytes)
 {
-  my_src_ptr src = (my_src_ptr) cinfo->src;
+  struct jpeg_source_mgr * src = cinfo->src;
 
   /* Just a dumb implementation for now.  Could use fseek() except
    * it doesn't work on pipes.  Not clear that being smart is worth
    * any trouble anyway --- large skips are infrequent.
    */
   if (num_bytes > 0) {
-    while (num_bytes > (long) src->pub.bytes_in_buffer) {
-      num_bytes -= (long) src->pub.bytes_in_buffer;
-      (void) fill_input_buffer(cinfo);
+    while (num_bytes > (long) src->bytes_in_buffer) {
+      num_bytes -= (long) src->bytes_in_buffer;
+      (void) (*src->fill_input_buffer) (cinfo);
       /* note we assume that fill_input_buffer will never return FALSE,
        * so suspension need not be handled.
        */
     }
-    src->pub.next_input_byte += (size_t) num_bytes;
-    src->pub.bytes_in_buffer -= (size_t) num_bytes;
+    src->next_input_byte += (size_t) num_bytes;
+    src->bytes_in_buffer -= (size_t) num_bytes;
   }
 }
 
@@ -210,3 +238,38 @@ jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile)
   src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */
   src->pub.next_input_byte = NULL; /* until buffer loaded */
 }
+
+
+/*
+ * Prepare for input from a supplied memory buffer.
+ * The buffer must contain the whole JPEG data.
+ */
+
+GLOBAL(void)
+jpeg_mem_src (j_decompress_ptr cinfo,
+	      const unsigned char * inbuffer, unsigned long insize)
+{
+  struct jpeg_source_mgr * src;
+
+  if (inbuffer == NULL || insize == 0)	/* Treat empty input as fatal error */
+    ERREXIT(cinfo, JERR_INPUT_EMPTY);
+
+  /* The source object is made permanent so that a series of JPEG images
+   * can be read from the same buffer by calling jpeg_mem_src only before
+   * the first one.
+   */
+  if (cinfo->src == NULL) {	/* first time for this JPEG object? */
+    cinfo->src = (struct jpeg_source_mgr *)
+      (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
+				  SIZEOF(struct jpeg_source_mgr));
+  }
+
+  src = cinfo->src;
+  src->init_source = init_mem_source;
+  src->fill_input_buffer = fill_mem_input_buffer;
+  src->skip_input_data = skip_input_data;
+  src->resync_to_restart = jpeg_resync_to_restart; /* use default method */
+  src->term_source = term_source;
+  src->bytes_in_buffer = (size_t) insize;
+  src->next_input_byte = (const JOCTET *) inbuffer;
+}

jdcoefct.c

@@ -2,6 +2,7 @@
  * jdcoefct.c
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 2002-2011 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -47,9 +48,6 @@ typedef struct {
    */
   JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU];
 
-  /* Temporary workspace for one MCU */
-  JCOEF * workspace;
-
 #ifdef D_MULTISCAN_FILES_SUPPORTED
   /* In multi-pass modes, we need a virtual block array for each component. */
   jvirt_barray_ptr whole_image[MAX_COMPONENTS];
@@ -165,8 +163,9 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
     for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col;
 	 MCU_col_num++) {
       /* Try to fetch an MCU.  Entropy decoder expects buffer to be zeroed. */
-      jzero_far((void FAR *) coef->MCU_buffer[0],
-		(size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
+      if (cinfo->lim_Se)	/* can bypass in DC only case */
+	FMEMZERO((void FAR *) coef->MCU_buffer[0],
+		 (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK)));
       if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) {
 	/* Suspension forced; update state counters and exit */
 	coef->MCU_vert_offset = yoffset;
@@ -190,7 +189,7 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width
 						    : compptr->last_col_width;
 	output_ptr = output_buf[compptr->component_index] +
-	  yoffset * compptr->DCT_scaled_size;
+	  yoffset * compptr->DCT_v_scaled_size;
 	start_col = MCU_col_num * compptr->MCU_sample_width;
 	for (yindex = 0; yindex < compptr->MCU_height; yindex++) {
 	  if (cinfo->input_iMCU_row < last_iMCU_row ||
@@ -200,11 +199,11 @@ decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	      (*inverse_DCT) (cinfo, compptr,
 			      (JCOEFPTR) coef->MCU_buffer[blkn+xindex],
 			      output_ptr, output_col);
-	      output_col += compptr->DCT_scaled_size;
+	      output_col += compptr->DCT_h_scaled_size;
 	    }
 	  }
 	  blkn += compptr->MCU_width;
-	  output_ptr += compptr->DCT_scaled_size;
+	  output_ptr += compptr->DCT_v_scaled_size;
 	}
       }
     }
@@ -365,9 +364,9 @@ decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	(*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr,
 			output_ptr, output_col);
 	buffer_ptr++;
-	output_col += compptr->DCT_scaled_size;
+	output_col += compptr->DCT_h_scaled_size;
       }
-      output_ptr += compptr->DCT_scaled_size;
+      output_ptr += compptr->DCT_v_scaled_size;
     }
   }
 
@@ -474,16 +473,13 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
   jpeg_component_info *compptr;
   inverse_DCT_method_ptr inverse_DCT;
   boolean first_row, last_row;
-  JCOEF * workspace;
+  JBLOCK workspace;
   int *coef_bits;
   JQUANT_TBL *quanttbl;
   INT32 Q00,Q01,Q02,Q10,Q11,Q20, num;
   int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9;
   int Al, pred;
 
-  /* Keep a local variable to avoid looking it up more than once */
-  workspace = coef->workspace;
-
   /* Force some input to be done if we are getting ahead of the input. */
   while (cinfo->input_scan_number <= cinfo->output_scan_number &&
 	 ! cinfo->inputctl->eoi_reached) {
@@ -660,9 +656,9 @@ decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf)
 	DC4 = DC5; DC5 = DC6;
 	DC7 = DC8; DC8 = DC9;
 	buffer_ptr++, prev_block_row++, next_block_row++;
-	output_col += compptr->DCT_scaled_size;
+	output_col += compptr->DCT_h_scaled_size;
       }
-      output_ptr += compptr->DCT_scaled_size;
+      output_ptr += compptr->DCT_v_scaled_size;
     }
   }
 
@@ -735,13 +731,11 @@ jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
     for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) {
       coef->MCU_buffer[i] = buffer + i;
     }
+    if (cinfo->lim_Se == 0)	/* DC only case: want to bypass later */
+      FMEMZERO((void FAR *) buffer,
+	       (size_t) (D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)));
     coef->pub.consume_data = dummy_consume_data;
     coef->pub.decompress_data = decompress_onepass;
     coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */
   }
-
-  /* Allocate the workspace buffer */
-  coef->workspace = (JCOEF *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-                                SIZEOF(JCOEF) * DCTSIZE2);
 }

jdcolor.c

@@ -2,8 +2,7 @@
  * jdcolor.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
- * Copyright (C) 2009, D. R. Commander.
+ * Modified 2011-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -13,7 +12,12 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
-#include "jsimd.h"
+
+
+#if RANGE_BITS < 2
+  /* Deliberate syntax err */
+  Sorry, this code requires 2 or more range extension bits.
+#endif
 
 
 /* Private subobject */
@@ -21,27 +25,57 @@
 typedef struct {
   struct jpeg_color_deconverter pub; /* public fields */
 
-  /* Private state for YCC->RGB conversion */
+  /* Private state for YCbCr->RGB and BG_YCC->RGB conversion */
   int * Cr_r_tab;		/* => table for Cr to R conversion */
   int * Cb_b_tab;		/* => table for Cb to B conversion */
   INT32 * Cr_g_tab;		/* => table for Cr to G conversion */
   INT32 * Cb_g_tab;		/* => table for Cb to G conversion */
+
+  /* Private state for RGB->Y conversion */
+  INT32 * rgb_y_tab;		/* => table for RGB to Y conversion */
 } my_color_deconverter;
 
 typedef my_color_deconverter * my_cconvert_ptr;
 
 
-/**************** YCbCr -> RGB conversion: most common case **************/
+/***************  YCbCr -> RGB conversion: most common case **************/
+/*************** BG_YCC -> RGB conversion: less common case **************/
+/***************    RGB -> Y   conversion: less common case **************/
 
 /*
- * YCbCr is defined per CCIR 601-1, except that Cb and Cr are
- * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
- * The conversion equations to be implemented are therefore
- *	R = Y                + 1.40200 * Cr
- *	G = Y - 0.34414 * Cb - 0.71414 * Cr
- *	B = Y + 1.77200 * Cb
+ * YCbCr is defined per Recommendation ITU-R BT.601-7 (03/2011),
+ * previously known as Recommendation CCIR 601-1, except that Cb and Cr
+ * are normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5.
+ * sRGB (standard RGB color space) is defined per IEC 61966-2-1:1999.
+ * sYCC (standard luma-chroma-chroma color space with extended gamut)
+ * is defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex F.
+ * bg-sRGB and bg-sYCC (big gamut standard color spaces)
+ * are defined per IEC 61966-2-1:1999 Amendment A1:2003 Annex G.
+ * Note that the derived conversion coefficients given in some of these
+ * documents are imprecise.  The general conversion equations are
+ *
+ *	R = Y + K * (1 - Kr) * Cr
+ *	G = Y - K * (Kb * (1 - Kb) * Cb + Kr * (1 - Kr) * Cr) / (1 - Kr - Kb)
+ *	B = Y + K * (1 - Kb) * Cb
+ *
+ *	Y = Kr * R + (1 - Kr - Kb) * G + Kb * B
+ *
+ * With Kr = 0.299 and Kb = 0.114 (derived according to SMPTE RP 177-1993
+ * from the 1953 FCC NTSC primaries and CIE Illuminant C), K = 2 for sYCC,
+ * the conversion equations to be implemented are therefore
+ *
+ *	R = Y + 1.402 * Cr
+ *	G = Y - 0.344136286 * Cb - 0.714136286 * Cr
+ *	B = Y + 1.772 * Cb
+ *
+ *	Y = 0.299 * R + 0.587 * G + 0.114 * B
+ *
  * where Cb and Cr represent the incoming values less CENTERJSAMPLE.
- * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.)
+ * For bg-sYCC, with K = 4, the equations are
+ *
+ *	R = Y + 2.804 * Cr
+ *	G = Y - 0.688272572 * Cb - 1.428272572 * Cr
+ *	B = Y + 3.544 * Cb
  *
  * To avoid floating-point arithmetic, we represent the fractional constants
  * as integers scaled up by 2^16 (about 4 digits precision); we have to divide
@@ -52,9 +86,9 @@ typedef my_color_deconverter * my_cconvert_ptr;
  * For even more speed, we avoid doing any multiplications in the inner loop
  * by precalculating the constants times Cb and Cr for all possible values.
  * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table);
- * for 12-bit samples it is still acceptable.  It's not very reasonable for
- * 16-bit samples, but if you want lossless storage you shouldn't be changing
- * colorspace anyway.
+ * for 9-bit to 12-bit samples it is still acceptable.  It's not very
+ * reasonable for 16-bit samples, but if you want lossless storage you
+ * shouldn't be changing colorspace anyway.
  * The Cr=>R and Cb=>B values can be rounded to integers in advance; the
  * values for the G calculation are left scaled up, since we must add them
  * together before rounding.
@@ -64,13 +98,26 @@ typedef my_color_deconverter * my_cconvert_ptr;
 #define ONE_HALF	((INT32) 1 << (SCALEBITS-1))
 #define FIX(x)		((INT32) ((x) * (1L<<SCALEBITS) + 0.5))
 
+/* We allocate one big table for RGB->Y conversion and divide it up into
+ * three parts, instead of doing three alloc_small requests.  This lets us
+ * use a single table base address, which can be held in a register in the
+ * inner loops on many machines (more than can hold all three addresses,
+ * anyway).
+ */
+
+#define R_Y_OFF		0			/* offset to R => Y section */
+#define G_Y_OFF		(1*(MAXJSAMPLE+1))	/* offset to G => Y section */
+#define B_Y_OFF		(2*(MAXJSAMPLE+1))	/* etc. */
+#define TABLE_SIZE	(3*(MAXJSAMPLE+1))
+
 
 /*
- * Initialize tables for YCC->RGB colorspace conversion.
+ * Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion.
  */
 
 LOCAL(void)
 build_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Normal case, sYCC */
 {
   my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
   int i;
@@ -93,17 +140,57 @@ build_ycc_rgb_table (j_decompress_ptr cinfo)
   for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
     /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
     /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
-    /* Cr=>R value is nearest int to 1.40200 * x */
+    /* Cr=>R value is nearest int to 1.402 * x */
     cconvert->Cr_r_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
-    /* Cb=>B value is nearest int to 1.77200 * x */
+		    RIGHT_SHIFT(FIX(1.402) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 1.772 * x */
     cconvert->Cb_b_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
-    /* Cr=>G value is scaled-up -0.71414 * x */
-    cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x;
-    /* Cb=>G value is scaled-up -0.34414 * x */
+		    RIGHT_SHIFT(FIX(1.772) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -0.714136286 * x */
+    cconvert->Cr_g_tab[i] = (- FIX(0.714136286)) * x;
+    /* Cb=>G value is scaled-up -0.344136286 * x */
     /* We also add in ONE_HALF so that need not do it in inner loop */
-    cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
+    cconvert->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF;
+  }
+}
+
+
+LOCAL(void)
+build_bg_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Wide gamut case, bg-sYCC */
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  int i;
+  INT32 x;
+  SHIFT_TEMPS
+
+  cconvert->Cr_r_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cb_b_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  cconvert->Cr_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+  cconvert->Cb_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+
+  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
+    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
+    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
+    /* Cr=>R value is nearest int to 2.804 * x */
+    cconvert->Cr_r_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(2.804) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 3.544 * x */
+    cconvert->Cb_b_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(3.544) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -1.428272572 * x */
+    cconvert->Cr_g_tab[i] = (- FIX(1.428272572)) * x;
+    /* Cb=>G value is scaled-up -0.688272572 * x */
+    /* We also add in ONE_HALF so that need not do it in inner loop */
+    cconvert->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF;
   }
 }
 
@@ -148,19 +235,196 @@ ycc_rgb_convert (j_decompress_ptr cinfo,
       y  = GETJSAMPLE(inptr0[col]);
       cb = GETJSAMPLE(inptr1[col]);
       cr = GETJSAMPLE(inptr2[col]);
-      /* Range-limiting is essential due to noise introduced by DCT losses. */
-      outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + Crrtab[cr]];
-      outptr[rgb_green[cinfo->out_color_space]] = range_limit[y +
+      /* Range-limiting is essential due to noise introduced by DCT losses,
+       * for extended gamut (sYCC) and wide gamut (bg-sYCC) encodings.
+       */
+      outptr[RGB_RED]   = range_limit[y + Crrtab[cr]];
+      outptr[RGB_GREEN] = range_limit[y +
 			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
 						 SCALEBITS))];
-      outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + Cbbtab[cb]];
-      outptr += rgb_pixelsize[cinfo->out_color_space];
+      outptr[RGB_BLUE]  = range_limit[y + Cbbtab[cb]];
+      outptr += RGB_PIXELSIZE;
     }
   }
 }
 
 
-/**************** Cases other than YCbCr -> RGB **************/
+/**************** Cases other than YCC -> RGB ****************/
+
+
+/*
+ * Initialize for RGB->grayscale colorspace conversion.
+ */
+
+LOCAL(void)
+build_rgb_y_table (j_decompress_ptr cinfo)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  INT32 * rgb_y_tab;
+  INT32 i;
+
+  /* Allocate and fill in the conversion tables. */
+  cconvert->rgb_y_tab = rgb_y_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(TABLE_SIZE * SIZEOF(INT32)));
+
+  for (i = 0; i <= MAXJSAMPLE; i++) {
+    rgb_y_tab[i+R_Y_OFF] = FIX(0.299) * i;
+    rgb_y_tab[i+G_Y_OFF] = FIX(0.587) * i;
+    rgb_y_tab[i+B_Y_OFF] = FIX(0.114) * i + ONE_HALF;
+  }
+}
+
+
+/*
+ * Convert RGB to grayscale.
+ */
+
+METHODDEF(void)
+rgb_gray_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register INT32 * ctab = cconvert->rgb_y_tab;
+  register int r, g, b;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr0[col]);
+      g = GETJSAMPLE(inptr1[col]);
+      b = GETJSAMPLE(inptr2[col]);
+      /* Y */
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * [R-G,G,B-G] to [R,G,B] conversion with modulo calculation
+ * (inverse color transform).
+ * This can be seen as an adaption of the general YCbCr->RGB
+ * conversion equation with Kr = Kb = 0, while replacing the
+ * normalization by modulo calculation.
+ */
+
+METHODDEF(void)
+rgb1_rgb_convert (j_decompress_ptr cinfo,
+		  JSAMPIMAGE input_buf, JDIMENSION input_row,
+		  JSAMPARRAY output_buf, int num_rows)
+{
+  register int r, g, b;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr0[col]);
+      g = GETJSAMPLE(inptr1[col]);
+      b = GETJSAMPLE(inptr2[col]);
+      /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD
+       * (modulo) operator is equivalent to the bitmask operator AND.
+       */
+      outptr[RGB_RED]   = (JSAMPLE) ((r + g - CENTERJSAMPLE) & MAXJSAMPLE);
+      outptr[RGB_GREEN] = (JSAMPLE) g;
+      outptr[RGB_BLUE]  = (JSAMPLE) ((b + g - CENTERJSAMPLE) & MAXJSAMPLE);
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
+
+
+/*
+ * [R-G,G,B-G] to grayscale conversion with modulo calculation
+ * (inverse color transform).
+ */
+
+METHODDEF(void)
+rgb1_gray_convert (j_decompress_ptr cinfo,
+		   JSAMPIMAGE input_buf, JDIMENSION input_row,
+		   JSAMPARRAY output_buf, int num_rows)
+{
+  my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert;
+  register INT32 * ctab = cconvert->rgb_y_tab;
+  register int r, g, b;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      r = GETJSAMPLE(inptr0[col]);
+      g = GETJSAMPLE(inptr1[col]);
+      b = GETJSAMPLE(inptr2[col]);
+      /* Assume that MAXJSAMPLE+1 is a power of 2, so that the MOD
+       * (modulo) operator is equivalent to the bitmask operator AND.
+       */
+      r = (r + g - CENTERJSAMPLE) & MAXJSAMPLE;
+      b = (b + g - CENTERJSAMPLE) & MAXJSAMPLE;
+      /* Y */
+      outptr[col] = (JSAMPLE)
+		((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF])
+		 >> SCALEBITS);
+    }
+  }
+}
+
+
+/*
+ * No colorspace change, but conversion from separate-planes
+ * to interleaved representation.
+ */
+
+METHODDEF(void)
+rgb_convert (j_decompress_ptr cinfo,
+	     JSAMPIMAGE input_buf, JDIMENSION input_row,
+	     JSAMPARRAY output_buf, int num_rows)
+{
+  register JSAMPROW outptr;
+  register JSAMPROW inptr0, inptr1, inptr2;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
+
+  while (--num_rows >= 0) {
+    inptr0 = input_buf[0][input_row];
+    inptr1 = input_buf[1][input_row];
+    inptr2 = input_buf[2][input_row];
+    input_row++;
+    outptr = *output_buf++;
+    for (col = 0; col < num_cols; col++) {
+      /* We can dispense with GETJSAMPLE() here */
+      outptr[RGB_RED]   = inptr0[col];
+      outptr[RGB_GREEN] = inptr1[col];
+      outptr[RGB_BLUE]  = inptr2[col];
+      outptr += RGB_PIXELSIZE;
+    }
+  }
+}
 
 
 /*
@@ -173,19 +437,20 @@ null_convert (j_decompress_ptr cinfo,
 	      JSAMPIMAGE input_buf, JDIMENSION input_row,
 	      JSAMPARRAY output_buf, int num_rows)
 {
-  register JSAMPROW inptr, outptr;
-  register JDIMENSION count;
-  register int num_components = cinfo->num_components;
-  JDIMENSION num_cols = cinfo->output_width;
   int ci;
+  register int nc = cinfo->num_components;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr;
+  register JDIMENSION col;
+  JDIMENSION num_cols = cinfo->output_width;
 
   while (--num_rows >= 0) {
-    for (ci = 0; ci < num_components; ci++) {
+    for (ci = 0; ci < nc; ci++) {
       inptr = input_buf[ci][input_row];
       outptr = output_buf[0] + ci;
-      for (count = num_cols; count > 0; count--) {
+      for (col = 0; col < num_cols; col++) {
 	*outptr = *inptr++;	/* needn't bother with GETJSAMPLE() here */
-	outptr += num_components;
+	outptr += nc;
       }
     }
     input_row++;
@@ -196,7 +461,7 @@ null_convert (j_decompress_ptr cinfo,
 
 /*
  * Color conversion for grayscale: just copy the data.
- * This also works for YCbCr -> grayscale conversion, in which
+ * This also works for YCC -> grayscale conversion, in which
  * we just copy the Y (luminance) component and ignore chrominance.
  */
 
@@ -221,22 +486,18 @@ gray_rgb_convert (j_decompress_ptr cinfo,
 		  JSAMPIMAGE input_buf, JDIMENSION input_row,
 		  JSAMPARRAY output_buf, int num_rows)
 {
-  register JSAMPROW inptr, outptr;
-  JSAMPLE *maxinptr;
+  register JSAMPROW outptr;
+  register JSAMPROW inptr;
   register JDIMENSION col;
   JDIMENSION num_cols = cinfo->output_width;
-  int rindex = rgb_red[cinfo->out_color_space];
-  int gindex = rgb_green[cinfo->out_color_space];
-  int bindex = rgb_blue[cinfo->out_color_space];
-  int rgbstride = rgb_pixelsize[cinfo->out_color_space];
 
   while (--num_rows >= 0) {
     inptr = input_buf[0][input_row++];
-    maxinptr = &inptr[num_cols];
     outptr = *output_buf++;
-    for (; inptr < maxinptr; inptr++, outptr += rgbstride) {
+    for (col = 0; col < num_cols; col++) {
       /* We can dispense with GETJSAMPLE() here */
-      outptr[rindex] = outptr[gindex] = outptr[bindex] = *inptr;
+      outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col];
+      outptr += RGB_PIXELSIZE;
     }
   }
 }
@@ -279,7 +540,9 @@ ycck_cmyk_convert (j_decompress_ptr cinfo,
       y  = GETJSAMPLE(inptr0[col]);
       cb = GETJSAMPLE(inptr1[col]);
       cr = GETJSAMPLE(inptr2[col]);
-      /* Range-limiting is essential due to noise introduced by DCT losses. */
+      /* Range-limiting is essential due to noise introduced by DCT losses,
+       * and for extended gamut encodings (sYCC).
+       */
       outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])];	/* red */
       outptr[1] = range_limit[MAXJSAMPLE - (y +			/* green */
 			      ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr],
@@ -317,7 +580,7 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
   cconvert = (my_cconvert_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_color_deconverter));
-  cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert;
+  cinfo->cconvert = &cconvert->pub;
   cconvert->pub.start_pass = start_pass_dcolor;
 
   /* Make sure num_components agrees with jpeg_color_space */
@@ -329,6 +592,8 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
 
   case JCS_RGB:
   case JCS_YCbCr:
+  case JCS_BG_RGB:
+  case JCS_BG_YCC:
     if (cinfo->num_components != 3)
       ERREXIT(cinfo, JERR_BAD_J_COLORSPACE);
     break;
@@ -345,6 +610,12 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
     break;
   }
 
+  /* Support color transform only for RGB colorspaces */
+  if (cinfo->color_transform &&
+      cinfo->jpeg_color_space != JCS_RGB &&
+      cinfo->jpeg_color_space != JCS_BG_RGB)
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+
   /* Set out_color_components and conversion method based on requested space.
    * Also clear the component_needed flags for any unused components,
    * so that earlier pipeline stages can avoid useless computation.
@@ -353,49 +624,94 @@ jinit_color_deconverter (j_decompress_ptr cinfo)
   switch (cinfo->out_color_space) {
   case JCS_GRAYSCALE:
     cinfo->out_color_components = 1;
-    if (cinfo->jpeg_color_space == JCS_GRAYSCALE ||
-	cinfo->jpeg_color_space == JCS_YCbCr) {
+    switch (cinfo->jpeg_color_space) {
+    case JCS_GRAYSCALE:
+    case JCS_YCbCr:
+    case JCS_BG_YCC:
       cconvert->pub.color_convert = grayscale_convert;
       /* For color->grayscale conversion, only the Y (0) component is needed */
       for (ci = 1; ci < cinfo->num_components; ci++)
 	cinfo->comp_info[ci].component_needed = FALSE;
-    } else
+      break;
+    case JCS_RGB:
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_gray_convert;
+	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb1_gray_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+      }
+      build_rgb_y_table(cinfo);
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   case JCS_RGB:
-  case JCS_EXT_RGB:
-  case JCS_EXT_RGBX:
-  case JCS_EXT_BGR:
-  case JCS_EXT_BGRX:
-  case JCS_EXT_XBGR:
-  case JCS_EXT_XRGB:
-    cinfo->out_color_components = rgb_pixelsize[cinfo->out_color_space];
-    if (cinfo->jpeg_color_space == JCS_YCbCr) {
-      if (jsimd_can_ycc_rgb())
-        cconvert->pub.color_convert = jsimd_ycc_rgb_convert;
-      else {
-        cconvert->pub.color_convert = ycc_rgb_convert;
-        build_ycc_rgb_table(cinfo);
-      }
-    } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) {
+    cinfo->out_color_components = RGB_PIXELSIZE;
+    switch (cinfo->jpeg_color_space) {
+    case JCS_GRAYSCALE:
       cconvert->pub.color_convert = gray_rgb_convert;
-    } else if (cinfo->jpeg_color_space == cinfo->out_color_space &&
-      rgb_pixelsize[cinfo->out_color_space] == 3) {
-      cconvert->pub.color_convert = null_convert;
+      break;
+    case JCS_YCbCr:
+      cconvert->pub.color_convert = ycc_rgb_convert;
+      build_ycc_rgb_table(cinfo);
+      break;
+    case JCS_BG_YCC:
+      cconvert->pub.color_convert = ycc_rgb_convert;
+      build_bg_ycc_rgb_table(cinfo);
+      break;
+    case JCS_RGB:
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_convert;
+	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb1_rgb_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+      }
+      break;
+    default:
+      ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
+    break;
+
+  case JCS_BG_RGB:
+    cinfo->out_color_components = RGB_PIXELSIZE;
+    if (cinfo->jpeg_color_space == JCS_BG_RGB) {
+      switch (cinfo->color_transform) {
+      case JCT_NONE:
+	cconvert->pub.color_convert = rgb_convert;
+	break;
+      case JCT_SUBTRACT_GREEN:
+	cconvert->pub.color_convert = rgb1_rgb_convert;
+	break;
+      default:
+	ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+      }
     } else
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
     break;
 
   case JCS_CMYK:
     cinfo->out_color_components = 4;
-    if (cinfo->jpeg_color_space == JCS_YCCK) {
+    switch (cinfo->jpeg_color_space) {
+    case JCS_YCCK:
       cconvert->pub.color_convert = ycck_cmyk_convert;
       build_ycc_rgb_table(cinfo);
-    } else if (cinfo->jpeg_color_space == JCS_CMYK) {
+      break;
+    case JCS_CMYK:
       cconvert->pub.color_convert = null_convert;
-    } else
+      break;
+    default:
       ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+    }
     break;
 
   default:

jdct.h

@@ -2,6 +2,7 @@
  * jdct.h
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -14,35 +15,36 @@
 
 
 /*
- * A forward DCT routine is given a pointer to a work area of type DCTELEM[];
- * the DCT is to be performed in-place in that buffer.  Type DCTELEM is int
- * for 8-bit samples, INT32 for 12-bit samples.  (NOTE: Floating-point DCT
- * implementations use an array of type FAST_FLOAT, instead.)
- * The DCT inputs are expected to be signed (range +-CENTERJSAMPLE).
+ * A forward DCT routine is given a pointer to an input sample array and
+ * a pointer to a work area of type DCTELEM[]; the DCT is to be performed
+ * in-place in that buffer.  Type DCTELEM is int for 8-bit samples, INT32
+ * for 12-bit samples.  (NOTE: Floating-point DCT implementations use an
+ * array of type FAST_FLOAT, instead.)
+ * The input data is to be fetched from the sample array starting at a
+ * specified column.  (Any row offset needed will be applied to the array
+ * pointer before it is passed to the FDCT code.)
+ * Note that the number of samples fetched by the FDCT routine is
+ * DCT_h_scaled_size * DCT_v_scaled_size.
  * The DCT outputs are returned scaled up by a factor of 8; they therefore
  * have a range of +-8K for 8-bit data, +-128K for 12-bit data.  This
  * convention improves accuracy in integer implementations and saves some
  * work in floating-point ones.
- * Quantization of the output coefficients is done by jcdctmgr.c. This
- * step requires an unsigned type and also one with twice the bits.
+ * Quantization of the output coefficients is done by jcdctmgr.c.
  */
 
 #if BITS_IN_JSAMPLE == 8
-#ifndef WITH_SIMD
 typedef int DCTELEM;		/* 16 or 32 bits is fine */
-typedef unsigned int UDCTELEM;
-typedef unsigned long long UDCTELEM2;
-#else
-typedef short DCTELEM;  /* prefer 16 bit with SIMD for parellelism */
-typedef unsigned short UDCTELEM;
-typedef unsigned int UDCTELEM2;
-#endif
 #else
 typedef INT32 DCTELEM;		/* must have 32 bits */
-typedef UINT32 UDCTELEM;
-typedef unsigned long long UDCTELEM2;
 #endif
 
+typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data,
+					       JSAMPARRAY sample_data,
+					       JDIMENSION start_col));
+typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data,
+					     JSAMPARRAY sample_data,
+					     JDIMENSION start_col));
+
 
 /*
  * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer
@@ -52,7 +54,7 @@ typedef unsigned long long UDCTELEM2;
  * sample array starting at a specified column.  (Any row offset needed will
  * be applied to the array pointer before it is passed to the IDCT code.)
  * Note that the number of samples emitted by the IDCT routine is
- * DCT_scaled_size * DCT_scaled_size.
+ * DCT_h_scaled_size * DCT_v_scaled_size.
  */
 
 /* typedef inverse_DCT_method_ptr is declared in jpegint.h */
@@ -77,13 +79,15 @@ typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
  * converting them to unsigned form (0..MAXJSAMPLE).  The raw outputs could
  * be quite far out of range if the input data is corrupt, so a bulletproof
  * range-limiting step is required.  We use a mask-and-table-lookup method
- * to do the combined operations quickly.  See the comments with
+ * to do the combined operations quickly, assuming that RANGE_CENTER
+ * (defined in jpegint.h) is a power of 2.  See the comments with
  * prepare_range_limit_table (in jdmaster.c) for more info.
  */
 
-#define IDCT_range_limit(cinfo)  ((cinfo)->sample_range_limit + CENTERJSAMPLE)
+#define RANGE_MASK  (RANGE_CENTER * 2 - 1)
+#define RANGE_SUBSET  (RANGE_CENTER - CENTERJSAMPLE)
 
-#define RANGE_MASK  (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */
+#define IDCT_range_limit(cinfo)  ((cinfo)->sample_range_limit - RANGE_SUBSET)
 
 
 /* Short forms of external names for systems with brain-damaged linkers. */
@@ -92,19 +96,143 @@ typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */
 #define jpeg_fdct_islow		jFDislow
 #define jpeg_fdct_ifast		jFDifast
 #define jpeg_fdct_float		jFDfloat
+#define jpeg_fdct_7x7		jFD7x7
+#define jpeg_fdct_6x6		jFD6x6
+#define jpeg_fdct_5x5		jFD5x5
+#define jpeg_fdct_4x4		jFD4x4
+#define jpeg_fdct_3x3		jFD3x3
+#define jpeg_fdct_2x2		jFD2x2
+#define jpeg_fdct_1x1		jFD1x1
+#define jpeg_fdct_9x9		jFD9x9
+#define jpeg_fdct_10x10		jFD10x10
+#define jpeg_fdct_11x11		jFD11x11
+#define jpeg_fdct_12x12		jFD12x12
+#define jpeg_fdct_13x13		jFD13x13
+#define jpeg_fdct_14x14		jFD14x14
+#define jpeg_fdct_15x15		jFD15x15
+#define jpeg_fdct_16x16		jFD16x16
+#define jpeg_fdct_16x8		jFD16x8
+#define jpeg_fdct_14x7		jFD14x7
+#define jpeg_fdct_12x6		jFD12x6
+#define jpeg_fdct_10x5		jFD10x5
+#define jpeg_fdct_8x4		jFD8x4
+#define jpeg_fdct_6x3		jFD6x3
+#define jpeg_fdct_4x2		jFD4x2
+#define jpeg_fdct_2x1		jFD2x1
+#define jpeg_fdct_8x16		jFD8x16
+#define jpeg_fdct_7x14		jFD7x14
+#define jpeg_fdct_6x12		jFD6x12
+#define jpeg_fdct_5x10		jFD5x10
+#define jpeg_fdct_4x8		jFD4x8
+#define jpeg_fdct_3x6		jFD3x6
+#define jpeg_fdct_2x4		jFD2x4
+#define jpeg_fdct_1x2		jFD1x2
 #define jpeg_idct_islow		jRDislow
 #define jpeg_idct_ifast		jRDifast
 #define jpeg_idct_float		jRDfloat
+#define jpeg_idct_7x7		jRD7x7
+#define jpeg_idct_6x6		jRD6x6
+#define jpeg_idct_5x5		jRD5x5
 #define jpeg_idct_4x4		jRD4x4
+#define jpeg_idct_3x3		jRD3x3
 #define jpeg_idct_2x2		jRD2x2
 #define jpeg_idct_1x1		jRD1x1
+#define jpeg_idct_9x9		jRD9x9
+#define jpeg_idct_10x10		jRD10x10
+#define jpeg_idct_11x11		jRD11x11
+#define jpeg_idct_12x12		jRD12x12
+#define jpeg_idct_13x13		jRD13x13
+#define jpeg_idct_14x14		jRD14x14
+#define jpeg_idct_15x15		jRD15x15
+#define jpeg_idct_16x16		jRD16x16
+#define jpeg_idct_16x8		jRD16x8
+#define jpeg_idct_14x7		jRD14x7
+#define jpeg_idct_12x6		jRD12x6
+#define jpeg_idct_10x5		jRD10x5
+#define jpeg_idct_8x4		jRD8x4
+#define jpeg_idct_6x3		jRD6x3
+#define jpeg_idct_4x2		jRD4x2
+#define jpeg_idct_2x1		jRD2x1
+#define jpeg_idct_8x16		jRD8x16
+#define jpeg_idct_7x14		jRD7x14
+#define jpeg_idct_6x12		jRD6x12
+#define jpeg_idct_5x10		jRD5x10
+#define jpeg_idct_4x8		jRD4x8
+#define jpeg_idct_3x6		jRD3x8
+#define jpeg_idct_2x4		jRD2x4
+#define jpeg_idct_1x2		jRD1x2
 #endif /* NEED_SHORT_EXTERNAL_NAMES */
 
 /* Extern declarations for the forward and inverse DCT routines. */
 
-EXTERN(void) jpeg_fdct_islow JPP((DCTELEM * data));
-EXTERN(void) jpeg_fdct_ifast JPP((DCTELEM * data));
-EXTERN(void) jpeg_fdct_float JPP((FAST_FLOAT * data));
+EXTERN(void) jpeg_fdct_islow
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_ifast
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_float
+    JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_7x7
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_5x5
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_3x3
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_1x1
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_9x9
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_10x10
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_11x11
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_12x12
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_13x13
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_14x14
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_15x15
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_16x16
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_16x8
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_14x7
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_12x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_10x5
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_8x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x3
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x1
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_8x16
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_7x14
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_6x12
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_5x10
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_4x8
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_3x6
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_2x4
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
+EXTERN(void) jpeg_fdct_1x2
+    JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col));
 
 EXTERN(void) jpeg_idct_islow
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
@@ -115,15 +243,99 @@ EXTERN(void) jpeg_idct_ifast
 EXTERN(void) jpeg_idct_float
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_7x7
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_5x5
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 EXTERN(void) jpeg_idct_4x4
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_3x3
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 EXTERN(void) jpeg_idct_2x2
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 EXTERN(void) jpeg_idct_1x1
     JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
 	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_9x9
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_10x10
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_11x11
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_12x12
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_13x13
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_14x14
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_15x15
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_16x16
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_16x8
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_14x7
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_12x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_10x5
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_8x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x3
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x1
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_8x16
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_7x14
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_6x12
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_5x10
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_4x8
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_3x6
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_2x4
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
+EXTERN(void) jpeg_idct_1x2
+    JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr,
+	 JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col));
 
 
 /*
@@ -182,3 +394,23 @@ EXTERN(void) jpeg_idct_1x1
 #ifndef MULTIPLY16V16		/* default definition */
 #define MULTIPLY16V16(var1,var2)  ((var1) * (var2))
 #endif
+
+/* Like RIGHT_SHIFT, but applies to a DCTELEM.
+ * We assume that int right shift is unsigned if INT32 right shift is.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define ISHIFT_TEMPS	DCTELEM ishift_temp;
+#if BITS_IN_JSAMPLE == 8
+#define DCTELEMBITS  16		/* DCTELEM may be 16 or 32 bits */
+#else
+#define DCTELEMBITS  32		/* DCTELEM must be 32 bits */
+#endif
+#define IRIGHT_SHIFT(x,shft)  \
+    ((ishift_temp = (x)) < 0 ? \
+     (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \
+     (ishift_temp >> (shft)))
+#else
+#define ISHIFT_TEMPS
+#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif

jddctmgr.c

@@ -2,7 +2,7 @@
  * jddctmgr.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Modified 2002-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -20,7 +20,6 @@
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jdct.h"		/* Private declarations for DCT subsystem */
-#include "jsimddct.h"
 
 
 /*
@@ -100,53 +99,150 @@ start_pass (j_decompress_ptr cinfo)
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     /* Select the proper IDCT routine for this component's scaling */
-    switch (compptr->DCT_scaled_size) {
+    switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) {
 #ifdef IDCT_SCALING_SUPPORTED
-    case 1:
+    case ((1 << 8) + 1):
       method_ptr = jpeg_idct_1x1;
-      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
       break;
-    case 2:
-      if (jsimd_can_idct_2x2())
-        method_ptr = jsimd_idct_2x2;
-      else
-        method_ptr = jpeg_idct_2x2;
-      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+    case ((2 << 8) + 2):
+      method_ptr = jpeg_idct_2x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
       break;
-    case 4:
-      if (jsimd_can_idct_4x4())
-        method_ptr = jsimd_idct_4x4;
-      else
-        method_ptr = jpeg_idct_4x4;
-      method = JDCT_ISLOW;	/* jidctred uses islow-style table */
+    case ((3 << 8) + 3):
+      method_ptr = jpeg_idct_3x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 4):
+      method_ptr = jpeg_idct_4x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 5):
+      method_ptr = jpeg_idct_5x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 6):
+      method_ptr = jpeg_idct_6x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 7):
+      method_ptr = jpeg_idct_7x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((9 << 8) + 9):
+      method_ptr = jpeg_idct_9x9;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 10):
+      method_ptr = jpeg_idct_10x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((11 << 8) + 11):
+      method_ptr = jpeg_idct_11x11;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 12):
+      method_ptr = jpeg_idct_12x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((13 << 8) + 13):
+      method_ptr = jpeg_idct_13x13;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 14):
+      method_ptr = jpeg_idct_14x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((15 << 8) + 15):
+      method_ptr = jpeg_idct_15x15;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 16):
+      method_ptr = jpeg_idct_16x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((16 << 8) + 8):
+      method_ptr = jpeg_idct_16x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((14 << 8) + 7):
+      method_ptr = jpeg_idct_14x7;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((12 << 8) + 6):
+      method_ptr = jpeg_idct_12x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((10 << 8) + 5):
+      method_ptr = jpeg_idct_10x5;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 4):
+      method_ptr = jpeg_idct_8x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 3):
+      method_ptr = jpeg_idct_6x3;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 2):
+      method_ptr = jpeg_idct_4x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 1):
+      method_ptr = jpeg_idct_2x1;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((8 << 8) + 16):
+      method_ptr = jpeg_idct_8x16;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((7 << 8) + 14):
+      method_ptr = jpeg_idct_7x14;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((6 << 8) + 12):
+      method_ptr = jpeg_idct_6x12;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((5 << 8) + 10):
+      method_ptr = jpeg_idct_5x10;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((4 << 8) + 8):
+      method_ptr = jpeg_idct_4x8;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((3 << 8) + 6):
+      method_ptr = jpeg_idct_3x6;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((2 << 8) + 4):
+      method_ptr = jpeg_idct_2x4;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
+      break;
+    case ((1 << 8) + 2):
+      method_ptr = jpeg_idct_1x2;
+      method = JDCT_ISLOW;	/* jidctint uses islow-style table */
       break;
 #endif
-    case DCTSIZE:
+    case ((DCTSIZE << 8) + DCTSIZE):
       switch (cinfo->dct_method) {
 #ifdef DCT_ISLOW_SUPPORTED
       case JDCT_ISLOW:
-	if (jsimd_can_idct_islow())
-	  method_ptr = jsimd_idct_islow;
-	else
-	  method_ptr = jpeg_idct_islow;
+	method_ptr = jpeg_idct_islow;
 	method = JDCT_ISLOW;
 	break;
 #endif
 #ifdef DCT_IFAST_SUPPORTED
       case JDCT_IFAST:
-	if (jsimd_can_idct_ifast())
-	  method_ptr = jsimd_idct_ifast;
-	else
-	  method_ptr = jpeg_idct_ifast;
+	method_ptr = jpeg_idct_ifast;
 	method = JDCT_IFAST;
 	break;
 #endif
 #ifdef DCT_FLOAT_SUPPORTED
       case JDCT_FLOAT:
-	if (jsimd_can_idct_float())
-	  method_ptr = jsimd_idct_float;
-	else
-	  method_ptr = jpeg_idct_float;
+	method_ptr = jpeg_idct_float;
 	method = JDCT_FLOAT;
 	break;
 #endif
@@ -156,7 +252,8 @@ start_pass (j_decompress_ptr cinfo)
       }
       break;
     default:
-      ERREXIT1(cinfo, JERR_BAD_DCTSIZE, compptr->DCT_scaled_size);
+      ERREXIT2(cinfo, JERR_BAD_DCTSIZE,
+	       compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size);
       break;
     }
     idct->pub.inverse_DCT[ci] = method_ptr;
@@ -228,6 +325,7 @@ start_pass (j_decompress_ptr cinfo)
 	 * coefficients scaled by scalefactor[row]*scalefactor[col], where
 	 *   scalefactor[0] = 1
 	 *   scalefactor[k] = cos(k*PI/16) * sqrt(2)    for k=1..7
+	 * We apply a further scale factor of 1/8.
 	 */
 	FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table;
 	int row, col;
@@ -241,7 +339,7 @@ start_pass (j_decompress_ptr cinfo)
 	  for (col = 0; col < DCTSIZE; col++) {
 	    fmtbl[i] = (FLOAT_MULT_TYPE)
 	      ((double) qtbl->quantval[i] *
-	       aanscalefactor[row] * aanscalefactor[col]);
+	       aanscalefactor[row] * aanscalefactor[col] * 0.125);
 	    i++;
 	  }
 	}
@@ -270,7 +368,7 @@ jinit_inverse_dct (j_decompress_ptr cinfo)
   idct = (my_idct_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_idct_controller));
-  cinfo->idct = (struct jpeg_inverse_dct *) idct;
+  cinfo->idct = &idct->pub;
   idct->pub.start_pass = start_pass;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;

jdhuff.h

@@ -1,214 +0,0 @@
-/*
- * jdhuff.h
- *
- * Copyright (C) 1991-1997, Thomas G. Lane.
- * Copyright (C) 2010, D. R. Commander.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains declarations for Huffman entropy decoding routines
- * that are shared between the sequential decoder (jdhuff.c) and the
- * progressive decoder (jdphuff.c).  No other modules need to see these.
- */
-
-/* Short forms of external names for systems with brain-damaged linkers. */
-
-#ifdef NEED_SHORT_EXTERNAL_NAMES
-#define jpeg_make_d_derived_tbl	jMkDDerived
-#define jpeg_fill_bit_buffer	jFilBitBuf
-#define jpeg_huff_decode	jHufDecode
-#endif /* NEED_SHORT_EXTERNAL_NAMES */
-
-
-/* Derived data constructed for each Huffman table */
-
-#define HUFF_LOOKAHEAD	8	/* # of bits of lookahead */
-
-typedef struct {
-  /* Basic tables: (element [0] of each array is unused) */
-  INT32 maxcode[18];		/* largest code of length k (-1 if none) */
-  /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */
-  INT32 valoffset[18];		/* huffval[] offset for codes of length k */
-  /* valoffset[k] = huffval[] index of 1st symbol of code length k, less
-   * the smallest code of length k; so given a code of length k, the
-   * corresponding symbol is huffval[code + valoffset[k]]
-   */
-
-  /* Link to public Huffman table (needed only in jpeg_huff_decode) */
-  JHUFF_TBL *pub;
-
-  /* Lookahead table: indexed by the next HUFF_LOOKAHEAD bits of
-   * the input data stream.  If the next Huffman code is no more
-   * than HUFF_LOOKAHEAD bits long, we can obtain its length and
-   * the corresponding symbol directly from this tables.
-   *
-   * The lower 8 bits of each table entry contain the number of
-   * bits in the corresponding Huffman code, or HUFF_LOOKAHEAD + 1
-   * if too long.  The next 8 bits of each entry contain the
-   * symbol.
-   */
-  int lookup[1<<HUFF_LOOKAHEAD];
-} d_derived_tbl;
-
-/* Expand a Huffman table definition into the derived format */
-EXTERN(void) jpeg_make_d_derived_tbl
-	JPP((j_decompress_ptr cinfo, boolean isDC, int tblno,
-	     d_derived_tbl ** pdtbl));
-
-
-/*
- * Fetching the next N bits from the input stream is a time-critical operation
- * for the Huffman decoders.  We implement it with a combination of inline
- * macros and out-of-line subroutines.  Note that N (the number of bits
- * demanded at one time) never exceeds 15 for JPEG use.
- *
- * We read source bytes into get_buffer and dole out bits as needed.
- * If get_buffer already contains enough bits, they are fetched in-line
- * by the macros CHECK_BIT_BUFFER and GET_BITS.  When there aren't enough
- * bits, jpeg_fill_bit_buffer is called; it will attempt to fill get_buffer
- * as full as possible (not just to the number of bits needed; this
- * prefetching reduces the overhead cost of calling jpeg_fill_bit_buffer).
- * Note that jpeg_fill_bit_buffer may return FALSE to indicate suspension.
- * On TRUE return, jpeg_fill_bit_buffer guarantees that get_buffer contains
- * at least the requested number of bits --- dummy zeroes are inserted if
- * necessary.
- */
-
-#if __WORDSIZE == 64 || defined(_WIN64)
-
-typedef size_t bit_buf_type;	/* type of bit-extraction buffer */
-#define BIT_BUF_SIZE  64		/* size of buffer in bits */
-
-#else
-
-typedef INT32 bit_buf_type;	/* type of bit-extraction buffer */
-#define BIT_BUF_SIZE  32		/* size of buffer in bits */
-
-#endif
-
-/* If long is > 32 bits on your machine, and shifting/masking longs is
- * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE
- * appropriately should be a win.  Unfortunately we can't define the size
- * with something like  #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8)
- * because not all machines measure sizeof in 8-bit bytes.
- */
-
-typedef struct {		/* Bitreading state saved across MCUs */
-  bit_buf_type get_buffer;	/* current bit-extraction buffer */
-  int bits_left;		/* # of unused bits in it */
-} bitread_perm_state;
-
-typedef struct {		/* Bitreading working state within an MCU */
-  /* Current data source location */
-  /* We need a copy, rather than munging the original, in case of suspension */
-  const JOCTET * next_input_byte; /* => next byte to read from source */
-  size_t bytes_in_buffer;	/* # of bytes remaining in source buffer */
-  /* Bit input buffer --- note these values are kept in register variables,
-   * not in this struct, inside the inner loops.
-   */
-  bit_buf_type get_buffer;	/* current bit-extraction buffer */
-  int bits_left;		/* # of unused bits in it */
-  /* Pointer needed by jpeg_fill_bit_buffer. */
-  j_decompress_ptr cinfo;	/* back link to decompress master record */
-} bitread_working_state;
-
-/* Macros to declare and load/save bitread local variables. */
-#define BITREAD_STATE_VARS  \
-	register bit_buf_type get_buffer;  \
-	register int bits_left;  \
-	bitread_working_state br_state
-
-#define BITREAD_LOAD_STATE(cinfop,permstate)  \
-	br_state.cinfo = cinfop; \
-	br_state.next_input_byte = cinfop->src->next_input_byte; \
-	br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \
-	get_buffer = permstate.get_buffer; \
-	bits_left = permstate.bits_left;
-
-#define BITREAD_SAVE_STATE(cinfop,permstate)  \
-	cinfop->src->next_input_byte = br_state.next_input_byte; \
-	cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \
-	permstate.get_buffer = get_buffer; \
-	permstate.bits_left = bits_left
-
-/*
- * These macros provide the in-line portion of bit fetching.
- * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer
- * before using GET_BITS, PEEK_BITS, or DROP_BITS.
- * The variables get_buffer and bits_left are assumed to be locals,
- * but the state struct might not be (jpeg_huff_decode needs this).
- *	CHECK_BIT_BUFFER(state,n,action);
- *		Ensure there are N bits in get_buffer; if suspend, take action.
- *      val = GET_BITS(n);
- *		Fetch next N bits.
- *      val = PEEK_BITS(n);
- *		Fetch next N bits without removing them from the buffer.
- *	DROP_BITS(n);
- *		Discard next N bits.
- * The value N should be a simple variable, not an expression, because it
- * is evaluated multiple times.
- */
-
-#define CHECK_BIT_BUFFER(state,nbits,action) \
-	{ if (bits_left < (nbits)) {  \
-	    if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits))  \
-	      { action; }  \
-	    get_buffer = (state).get_buffer; bits_left = (state).bits_left; } }
-
-#define GET_BITS(nbits) \
-	(((int) (get_buffer >> (bits_left -= (nbits)))) & ((1<<(nbits))-1))
-
-#define PEEK_BITS(nbits) \
-	(((int) (get_buffer >> (bits_left -  (nbits)))) & ((1<<(nbits))-1))
-
-#define DROP_BITS(nbits) \
-	(bits_left -= (nbits))
-
-/* Load up the bit buffer to a depth of at least nbits */
-EXTERN(boolean) jpeg_fill_bit_buffer
-	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
-	     register int bits_left, int nbits));
-
-
-/*
- * Code for extracting next Huffman-coded symbol from input bit stream.
- * Again, this is time-critical and we make the main paths be macros.
- *
- * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits
- * without looping.  Usually, more than 95% of the Huffman codes will be 8
- * or fewer bits long.  The few overlength codes are handled with a loop,
- * which need not be inline code.
- *
- * Notes about the HUFF_DECODE macro:
- * 1. Near the end of the data segment, we may fail to get enough bits
- *    for a lookahead.  In that case, we do it the hard way.
- * 2. If the lookahead table contains no entry, the next code must be
- *    more than HUFF_LOOKAHEAD bits long.
- * 3. jpeg_huff_decode returns -1 if forced to suspend.
- */
-
-#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \
-{ register int nb, look; \
-  if (bits_left < HUFF_LOOKAHEAD) { \
-    if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \
-    get_buffer = state.get_buffer; bits_left = state.bits_left; \
-    if (bits_left < HUFF_LOOKAHEAD) { \
-      nb = 1; goto slowlabel; \
-    } \
-  } \
-  look = PEEK_BITS(HUFF_LOOKAHEAD); \
-  if ((nb = (htbl->lookup[look] >> HUFF_LOOKAHEAD)) <= HUFF_LOOKAHEAD) { \
-    DROP_BITS(nb); \
-    result = htbl->lookup[look] & ((1 << HUFF_LOOKAHEAD) - 1); \
-  } else { \
-slowlabel: \
-    if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \
-	{ failaction; } \
-    get_buffer = state.get_buffer; bits_left = state.bits_left; \
-  } \
-}
-
-/* Out-of-line case for Huffman code fetching */
-EXTERN(int) jpeg_huff_decode
-	JPP((bitread_working_state * state, register bit_buf_type get_buffer,
-	     register int bits_left, d_derived_tbl * htbl, int min_bits));

jdinput.c

@@ -2,13 +2,14 @@
  * jdinput.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2002-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains input control logic for the JPEG decompressor.
  * These routines are concerned with controlling the decompressor's input
  * processing (marker reading and coefficient decoding).  The actual input
- * reading is done in jdmarker.c, jdhuff.c, and jdphuff.c.
+ * reading is done in jdmarker.c, jdhuff.c, and jdarith.c.
  */
 
 #define JPEG_INTERNALS
@@ -21,7 +22,7 @@
 typedef struct {
   struct jpeg_input_controller pub; /* public fields */
 
-  boolean inheaders;		/* TRUE until first SOS is reached */
+  int inheaders;		/* Nonzero until first SOS is reached */
 } my_input_controller;
 
 typedef my_input_controller * my_inputctl_ptr;
@@ -35,6 +36,174 @@ METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo));
  * Routines to calculate various quantities related to the size of the image.
  */
 
+
+/*
+ * Compute output image dimensions and related values.
+ * NOTE: this is exported for possible use by application.
+ * Hence it mustn't do anything that can't be done twice.
+ */
+
+GLOBAL(void)
+jpeg_core_output_dimensions (j_decompress_ptr cinfo)
+/* Do computations that are needed before master selection phase.
+ * This function is used for transcoding and full decompression.
+ */
+{
+#ifdef IDCT_SCALING_SUPPORTED
+  int ci;
+  jpeg_component_info *compptr;
+
+  /* Compute actual output image dimensions and DCT scaling choices. */
+  if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) {
+    /* Provide 1/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 1;
+    cinfo->min_DCT_v_scaled_size = 1;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) {
+    /* Provide 2/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 2;
+    cinfo->min_DCT_v_scaled_size = 2;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) {
+    /* Provide 3/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 3;
+    cinfo->min_DCT_v_scaled_size = 3;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) {
+    /* Provide 4/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 4;
+    cinfo->min_DCT_v_scaled_size = 4;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) {
+    /* Provide 5/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 5;
+    cinfo->min_DCT_v_scaled_size = 5;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) {
+    /* Provide 6/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 6;
+    cinfo->min_DCT_v_scaled_size = 6;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) {
+    /* Provide 7/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 7;
+    cinfo->min_DCT_v_scaled_size = 7;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) {
+    /* Provide 8/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 8;
+    cinfo->min_DCT_v_scaled_size = 8;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) {
+    /* Provide 9/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 9;
+    cinfo->min_DCT_v_scaled_size = 9;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) {
+    /* Provide 10/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 10;
+    cinfo->min_DCT_v_scaled_size = 10;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) {
+    /* Provide 11/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 11;
+    cinfo->min_DCT_v_scaled_size = 11;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) {
+    /* Provide 12/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 12;
+    cinfo->min_DCT_v_scaled_size = 12;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) {
+    /* Provide 13/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 13;
+    cinfo->min_DCT_v_scaled_size = 13;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) {
+    /* Provide 14/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 14;
+    cinfo->min_DCT_v_scaled_size = 14;
+  } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) {
+    /* Provide 15/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 15;
+    cinfo->min_DCT_v_scaled_size = 15;
+  } else {
+    /* Provide 16/block_size scaling */
+    cinfo->output_width = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size);
+    cinfo->output_height = (JDIMENSION)
+      jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size);
+    cinfo->min_DCT_h_scaled_size = 16;
+    cinfo->min_DCT_v_scaled_size = 16;
+  }
+
+  /* Recompute dimensions of components */
+  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
+       ci++, compptr++) {
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size;
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size;
+  }
+
+#else /* !IDCT_SCALING_SUPPORTED */
+
+  /* Hardwire it to "no scaling" */
+  cinfo->output_width = cinfo->image_width;
+  cinfo->output_height = cinfo->image_height;
+  /* initial_setup has already initialized DCT_scaled_size,
+   * and has computed unscaled downsampled_width and downsampled_height.
+   */
+
+#endif /* IDCT_SCALING_SUPPORTED */
+}
+
+
 LOCAL(void)
 initial_setup (j_decompress_ptr cinfo)
 /* Called once, when first SOS marker is reached */
@@ -47,8 +216,8 @@ initial_setup (j_decompress_ptr cinfo)
       (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION)
     ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION);
 
-  /* For now, precision must match compiled-in value... */
-  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+  /* Only 8 to 12 bits data precision are supported for DCT based JPEG */
+  if (cinfo->data_precision < 8 || cinfo->data_precision > 12)
     ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
 
   /* Check that number of components won't exceed internal array sizes */
@@ -70,23 +239,121 @@ initial_setup (j_decompress_ptr cinfo)
 				   compptr->v_samp_factor);
   }
 
-  /* We initialize DCT_scaled_size and min_DCT_scaled_size to DCTSIZE.
-   * In the full decompressor, this will be overridden by jdmaster.c;
-   * but in the transcoder, jdmaster.c is not used, so we must do it here.
+  /* Derive block_size, natural_order, and lim_Se */
+  if (cinfo->is_baseline || (cinfo->progressive_mode &&
+      cinfo->comps_in_scan)) { /* no pseudo SOS marker */
+    cinfo->block_size = DCTSIZE;
+    cinfo->natural_order = jpeg_natural_order;
+    cinfo->lim_Se = DCTSIZE2-1;
+  } else
+    switch (cinfo->Se) {
+    case (1*1-1):
+      cinfo->block_size = 1;
+      cinfo->natural_order = jpeg_natural_order; /* not needed */
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (2*2-1):
+      cinfo->block_size = 2;
+      cinfo->natural_order = jpeg_natural_order2;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (3*3-1):
+      cinfo->block_size = 3;
+      cinfo->natural_order = jpeg_natural_order3;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (4*4-1):
+      cinfo->block_size = 4;
+      cinfo->natural_order = jpeg_natural_order4;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (5*5-1):
+      cinfo->block_size = 5;
+      cinfo->natural_order = jpeg_natural_order5;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (6*6-1):
+      cinfo->block_size = 6;
+      cinfo->natural_order = jpeg_natural_order6;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (7*7-1):
+      cinfo->block_size = 7;
+      cinfo->natural_order = jpeg_natural_order7;
+      cinfo->lim_Se = cinfo->Se;
+      break;
+    case (8*8-1):
+      cinfo->block_size = 8;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (9*9-1):
+      cinfo->block_size = 9;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (10*10-1):
+      cinfo->block_size = 10;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (11*11-1):
+      cinfo->block_size = 11;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (12*12-1):
+      cinfo->block_size = 12;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (13*13-1):
+      cinfo->block_size = 13;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (14*14-1):
+      cinfo->block_size = 14;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (15*15-1):
+      cinfo->block_size = 15;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    case (16*16-1):
+      cinfo->block_size = 16;
+      cinfo->natural_order = jpeg_natural_order;
+      cinfo->lim_Se = DCTSIZE2-1;
+      break;
+    default:
+      ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
+	       cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
+      break;
+    }
+
+  /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size.
+   * In the full decompressor,
+   * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c;
+   * but in the transcoder,
+   * jpeg_calc_output_dimensions is not used, so we must do it here.
    */
-  cinfo->min_DCT_scaled_size = DCTSIZE;
+  cinfo->min_DCT_h_scaled_size = cinfo->block_size;
+  cinfo->min_DCT_v_scaled_size = cinfo->block_size;
 
   /* Compute dimensions of components */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    compptr->DCT_scaled_size = DCTSIZE;
+    compptr->DCT_h_scaled_size = cinfo->block_size;
+    compptr->DCT_v_scaled_size = cinfo->block_size;
     /* Size in DCT blocks */
     compptr->width_in_blocks = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor,
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->height_in_blocks = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor,
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     /* downsampled_width and downsampled_height will also be overridden by
      * jdmaster.c if we are doing full decompression.  The transcoder library
      * doesn't use these values, but the calling application might.
@@ -107,7 +374,7 @@ initial_setup (j_decompress_ptr cinfo)
   /* Compute number of fully interleaved MCU rows. */
   cinfo->total_iMCU_rows = (JDIMENSION)
     jdiv_round_up((long) cinfo->image_height,
-		  (long) (cinfo->max_v_samp_factor*DCTSIZE));
+	          (long) (cinfo->max_v_samp_factor * cinfo->block_size));
 
   /* Decide whether file contains multiple scans */
   if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode)
@@ -138,7 +405,7 @@ per_scan_setup (j_decompress_ptr cinfo)
     compptr->MCU_width = 1;
     compptr->MCU_height = 1;
     compptr->MCU_blocks = 1;
-    compptr->MCU_sample_width = compptr->DCT_scaled_size;
+    compptr->MCU_sample_width = compptr->DCT_h_scaled_size;
     compptr->last_col_width = 1;
     /* For noninterleaved scans, it is convenient to define last_row_height
      * as the number of block rows present in the last iMCU row.
@@ -161,10 +428,10 @@ per_scan_setup (j_decompress_ptr cinfo)
     /* Overall image size in MCUs */
     cinfo->MCUs_per_row = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width,
-		    (long) (cinfo->max_h_samp_factor*DCTSIZE));
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     cinfo->MCU_rows_in_scan = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height,
-		    (long) (cinfo->max_v_samp_factor*DCTSIZE));
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
     
     cinfo->blocks_in_MCU = 0;
     
@@ -174,7 +441,7 @@ per_scan_setup (j_decompress_ptr cinfo)
       compptr->MCU_width = compptr->h_samp_factor;
       compptr->MCU_height = compptr->v_samp_factor;
       compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height;
-      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_scaled_size;
+      compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size;
       /* Figure number of non-dummy blocks in last MCU column & row */
       tmp = (int) (compptr->width_in_blocks % compptr->MCU_width);
       if (tmp == 0) tmp = compptr->MCU_width;
@@ -270,6 +537,7 @@ start_input_pass (j_decompress_ptr cinfo)
 METHODDEF(void)
 finish_input_pass (j_decompress_ptr cinfo)
 {
+  (*cinfo->entropy->finish_pass) (cinfo);
   cinfo->inputctl->consume_input = consume_markers;
 }
 
@@ -282,6 +550,10 @@ finish_input_pass (j_decompress_ptr cinfo)
  * The consume_input method pointer points either here or to the
  * coefficient controller's consume_data routine, depending on whether
  * we are reading a compressed data segment or inter-segment markers.
+ *
+ * Note: This function should NOT return a pseudo SOS marker (with zero
+ * component number) to the caller.  A pseudo marker received by
+ * read_markers is processed and then skipped for other markers.
  */
 
 METHODDEF(int)
@@ -293,41 +565,50 @@ consume_markers (j_decompress_ptr cinfo)
   if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */
     return JPEG_REACHED_EOI;
 
-  val = (*cinfo->marker->read_markers) (cinfo);
+  for (;;) {			/* Loop to pass pseudo SOS marker */
+    val = (*cinfo->marker->read_markers) (cinfo);
 
-  switch (val) {
-  case JPEG_REACHED_SOS:	/* Found SOS */
-    if (inputctl->inheaders) {	/* 1st SOS */
-      initial_setup(cinfo);
-      inputctl->inheaders = FALSE;
-      /* Note: start_input_pass must be called by jdmaster.c
-       * before any more input can be consumed.  jdapimin.c is
-       * responsible for enforcing this sequencing.
-       */
-    } else {			/* 2nd or later SOS marker */
-      if (! inputctl->pub.has_multiple_scans)
-	ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */
-      start_input_pass(cinfo);
+    switch (val) {
+    case JPEG_REACHED_SOS:	/* Found SOS */
+      if (inputctl->inheaders) { /* 1st SOS */
+	if (inputctl->inheaders == 1)
+	  initial_setup(cinfo);
+	if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */
+	  inputctl->inheaders = 2;
+	  break;
+	}
+	inputctl->inheaders = 0;
+	/* Note: start_input_pass must be called by jdmaster.c
+	 * before any more input can be consumed.  jdapimin.c is
+	 * responsible for enforcing this sequencing.
+	 */
+      } else {			/* 2nd or later SOS marker */
+	if (! inputctl->pub.has_multiple_scans)
+	  ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */
+	if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */
+	  break;
+	start_input_pass(cinfo);
+      }
+      return val;
+    case JPEG_REACHED_EOI:	/* Found EOI */
+      inputctl->pub.eoi_reached = TRUE;
+      if (inputctl->inheaders) { /* Tables-only datastream, apparently */
+	if (cinfo->marker->saw_SOF)
+	  ERREXIT(cinfo, JERR_SOF_NO_SOS);
+      } else {
+	/* Prevent infinite loop in coef ctlr's decompress_data routine
+	 * if user set output_scan_number larger than number of scans.
+	 */
+	if (cinfo->output_scan_number > cinfo->input_scan_number)
+	  cinfo->output_scan_number = cinfo->input_scan_number;
+      }
+      return val;
+    case JPEG_SUSPENDED:
+      return val;
+    default:
+      return val;
     }
-    break;
-  case JPEG_REACHED_EOI:	/* Found EOI */
-    inputctl->pub.eoi_reached = TRUE;
-    if (inputctl->inheaders) {	/* Tables-only datastream, apparently */
-      if (cinfo->marker->saw_SOF)
-	ERREXIT(cinfo, JERR_SOF_NO_SOS);
-    } else {
-      /* Prevent infinite loop in coef ctlr's decompress_data routine
-       * if user set output_scan_number larger than number of scans.
-       */
-      if (cinfo->output_scan_number > cinfo->input_scan_number)
-	cinfo->output_scan_number = cinfo->input_scan_number;
-    }
-    break;
-  case JPEG_SUSPENDED:
-    break;
   }
-
-  return val;
 }
 
 
@@ -343,7 +624,7 @@ reset_input_controller (j_decompress_ptr cinfo)
   inputctl->pub.consume_input = consume_markers;
   inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
   inputctl->pub.eoi_reached = FALSE;
-  inputctl->inheaders = TRUE;
+  inputctl->inheaders = 1;
   /* Reset other modules */
   (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo);
   (*cinfo->marker->reset_marker_reader) (cinfo);
@@ -366,7 +647,7 @@ jinit_input_controller (j_decompress_ptr cinfo)
   inputctl = (my_inputctl_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
 				SIZEOF(my_input_controller));
-  cinfo->inputctl = (struct jpeg_input_controller *) inputctl;
+  cinfo->inputctl = &inputctl->pub;
   /* Initialize method pointers */
   inputctl->pub.consume_input = consume_markers;
   inputctl->pub.reset_input_controller = reset_input_controller;
@@ -377,5 +658,5 @@ jinit_input_controller (j_decompress_ptr cinfo)
    */
   inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */
   inputctl->pub.eoi_reached = FALSE;
-  inputctl->inheaders = TRUE;
+  inputctl->inheaders = 1;
 }

jdmainct.c

@@ -2,6 +2,7 @@
  * jdmainct.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2002-2016 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -25,8 +26,8 @@
  * trivial.  Its responsibility is to provide context rows for upsampling/
  * rescaling, and doing this in an efficient fashion is a bit tricky.
  *
- * Postprocessor input data is counted in "row groups".  A row group
- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * Postprocessor input data is counted in "row groups".  A row group is
+ * defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size)
  * sample rows of each component.  (We require DCT_scaled_size values to be
  * chosen such that these numbers are integers.  In practice DCT_scaled_size
  * values will likely be powers of two, so we actually have the stronger
@@ -36,8 +37,8 @@
  * applying).
  *
  * The coefficient controller will deliver data to us one iMCU row at a time;
- * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or
- * exactly min_DCT_scaled_size row groups.  (This amount of data corresponds
+ * each iMCU row contains v_samp_factor * DCT_v_scaled_size sample rows, or
+ * exactly min_DCT_v_scaled_size row groups.  (This amount of data corresponds
  * to one row of MCUs when the image is fully interleaved.)  Note that the
  * number of sample rows varies across components, but the number of row
  * groups does not.  Some garbage sample rows may be included in the last iMCU
@@ -74,7 +75,7 @@
  * We could do this most simply by copying data around in our buffer, but
  * that'd be very slow.  We can avoid copying any data by creating a rather
  * strange pointer structure.  Here's how it works.  We allocate a workspace
- * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number
+ * consisting of M+2 row groups (where M = min_DCT_v_scaled_size is the number
  * of row groups per iMCU row).  We create two sets of redundant pointers to
  * the workspace.  Labeling the physical row groups 0 to M+1, the synthesized
  * pointer lists look like this:
@@ -99,11 +100,11 @@
  * the first or last sample row as necessary (this is cheaper than copying
  * sample rows around).
  *
- * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1.  In that
+ * This scheme breaks down if M < 2, ie, min_DCT_v_scaled_size is 1.  In that
  * situation each iMCU row provides only one row group so the buffering logic
  * must be different (eg, we must read two iMCU rows before we can emit the
  * first row group).  For now, we simply do not support providing context
- * rows when min_DCT_scaled_size is 1.  That combination seems unlikely to
+ * rows when min_DCT_v_scaled_size is 1.  That combination seems unlikely to
  * be worth providing --- if someone wants a 1/8th-size preview, they probably
  * want it quick and dirty, so a context-free upsampler is sufficient.
  */
@@ -117,17 +118,18 @@ typedef struct {
   /* Pointer to allocated workspace (M or M+2 row groups). */
   JSAMPARRAY buffer[MAX_COMPONENTS];
 
-  boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
   JDIMENSION rowgroup_ctr;	/* counts row groups output to postprocessor */
+  JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
 
   /* Remaining fields are only used in the context case. */
 
+  boolean buffer_full;		/* Have we gotten an iMCU row from decoder? */
+
   /* These are the master pointers to the funny-order pointer lists. */
   JSAMPIMAGE xbuffer[2];	/* pointers to weird pointer lists */
 
   int whichptr;			/* indicates which pointer set is now in use */
   int context_state;		/* process_data state machine status */
-  JDIMENSION rowgroups_avail;	/* row groups available to postprocessor */
   JDIMENSION iMCU_row_ctr;	/* counts iMCU rows to detect image top/bot */
 } my_main_controller;
 
@@ -159,24 +161,24 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
  * This is done only once, not once per pass.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf;
 
   /* Get top-level space for component array pointers.
    * We alloc both arrays with one call to save a few cycles.
    */
-  main->xbuffer[0] = (JSAMPIMAGE)
+  mainp->xbuffer[0] = (JSAMPIMAGE)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				cinfo->num_components * 2 * SIZEOF(JSAMPARRAY));
-  main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components;
+  mainp->xbuffer[1] = mainp->xbuffer[0] + cinfo->num_components;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
     /* Get space for pointer lists --- M+4 row groups in each list.
      * We alloc both pointer lists with one call to save a few cycles.
      */
@@ -184,9 +186,9 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				  2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW));
     xbuf += rgroup;		/* want one row group at negative offsets */
-    main->xbuffer[0][ci] = xbuf;
+    mainp->xbuffer[0][ci] = xbuf;
     xbuf += rgroup * (M + 4);
-    main->xbuffer[1][ci] = xbuf;
+    mainp->xbuffer[1][ci] = xbuf;
   }
 }
 
@@ -194,26 +196,26 @@ alloc_funny_pointers (j_decompress_ptr cinfo)
 LOCAL(void)
 make_funny_pointers (j_decompress_ptr cinfo)
 /* Create the funny pointer lists discussed in the comments above.
- * The actual workspace is already allocated (in main->buffer),
+ * The actual workspace is already allocated (in mainp->buffer),
  * and the space for the pointer lists is allocated too.
  * This routine just fills in the curiously ordered lists.
  * This will be repeated at the beginning of each pass.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY buf, xbuf0, xbuf1;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
-    xbuf0 = main->xbuffer[0][ci];
-    xbuf1 = main->xbuffer[1][ci];
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
+    xbuf0 = mainp->xbuffer[0][ci];
+    xbuf1 = mainp->xbuffer[1][ci];
     /* First copy the workspace pointers as-is */
-    buf = main->buffer[ci];
+    buf = mainp->buffer[ci];
     for (i = 0; i < rgroup * (M + 2); i++) {
       xbuf0[i] = xbuf1[i] = buf[i];
     }
@@ -240,18 +242,18 @@ set_wraparound_pointers (j_decompress_ptr cinfo)
  * This changes the pointer list state from top-of-image to the normal state.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, i, rgroup;
-  int M = cinfo->min_DCT_scaled_size;
+  int M = cinfo->min_DCT_v_scaled_size;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf0, xbuf1;
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
-    xbuf0 = main->xbuffer[0][ci];
-    xbuf1 = main->xbuffer[1][ci];
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
+    xbuf0 = mainp->xbuffer[0][ci];
+    xbuf1 = mainp->xbuffer[1][ci];
     for (i = 0; i < rgroup; i++) {
       xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i];
       xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i];
@@ -269,7 +271,7 @@ set_bottom_pointers (j_decompress_ptr cinfo)
  * Also sets rowgroups_avail to indicate number of nondummy row groups in row.
  */
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
   int ci, i, rgroup, iMCUheight, rows_left;
   jpeg_component_info *compptr;
   JSAMPARRAY xbuf;
@@ -277,8 +279,8 @@ set_bottom_pointers (j_decompress_ptr cinfo)
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
     /* Count sample rows in one iMCU row and in one row group */
-    iMCUheight = compptr->v_samp_factor * compptr->DCT_scaled_size;
-    rgroup = iMCUheight / cinfo->min_DCT_scaled_size;
+    iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size;
+    rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size;
     /* Count nondummy sample rows remaining for this component */
     rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight);
     if (rows_left == 0) rows_left = iMCUheight;
@@ -286,12 +288,12 @@ set_bottom_pointers (j_decompress_ptr cinfo)
      * so we need only do it once.
      */
     if (ci == 0) {
-      main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
+      mainp->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1);
     }
     /* Duplicate the last real sample row rgroup*2 times; this pads out the
      * last partial rowgroup and ensures at least one full rowgroup of context.
      */
-    xbuf = main->xbuffer[main->whichptr][ci];
+    xbuf = mainp->xbuffer[mainp->whichptr][ci];
     for (i = 0; i < rgroup * 2; i++) {
       xbuf[rows_left + i] = xbuf[rows_left-1];
     }
@@ -306,27 +308,27 @@ set_bottom_pointers (j_decompress_ptr cinfo)
 METHODDEF(void)
 start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
   switch (pass_mode) {
   case JBUF_PASS_THRU:
     if (cinfo->upsample->need_context_rows) {
-      main->pub.process_data = process_data_context_main;
+      mainp->pub.process_data = process_data_context_main;
       make_funny_pointers(cinfo); /* Create the xbuffer[] lists */
-      main->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
-      main->context_state = CTX_PREPARE_FOR_IMCU;
-      main->iMCU_row_ctr = 0;
+      mainp->whichptr = 0;	/* Read first iMCU row into xbuffer[0] */
+      mainp->context_state = CTX_PREPARE_FOR_IMCU;
+      mainp->iMCU_row_ctr = 0;
+      mainp->buffer_full = FALSE; /* Mark buffer empty */
     } else {
       /* Simple case with no context needed */
-      main->pub.process_data = process_data_simple_main;
+      mainp->pub.process_data = process_data_simple_main;
+      mainp->rowgroup_ctr = mainp->rowgroups_avail; /* Mark buffer empty */
     }
-    main->buffer_full = FALSE;	/* Mark buffer empty */
-    main->rowgroup_ctr = 0;
     break;
 #ifdef QUANT_2PASS_SUPPORTED
   case JBUF_CRANK_DEST:
     /* For last pass of 2-pass quantization, just crank the postprocessor */
-    main->pub.process_data = process_data_crank_post;
+    mainp->pub.process_data = process_data_crank_post;
     break;
 #endif
   default:
@@ -346,33 +348,24 @@ process_data_simple_main (j_decompress_ptr cinfo,
 			  JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
 			  JDIMENSION out_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
-  JDIMENSION rowgroups_avail;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
   /* Read input data if we haven't filled the main buffer yet */
-  if (! main->buffer_full) {
-    if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer))
+  if (mainp->rowgroup_ctr >= mainp->rowgroups_avail) {
+    if (! (*cinfo->coef->decompress_data) (cinfo, mainp->buffer))
       return;			/* suspension forced, can do nothing more */
-    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+    mainp->rowgroup_ctr = 0;	/* OK, we have an iMCU row to work with */
   }
 
-  /* There are always min_DCT_scaled_size row groups in an iMCU row. */
-  rowgroups_avail = (JDIMENSION) cinfo->min_DCT_scaled_size;
   /* Note: at the bottom of the image, we may pass extra garbage row groups
    * to the postprocessor.  The postprocessor has to check for bottom
    * of image anyway (at row resolution), so no point in us doing it too.
    */
 
   /* Feed the postprocessor */
-  (*cinfo->post->post_process_data) (cinfo, main->buffer,
-				     &main->rowgroup_ctr, rowgroups_avail,
-				     output_buf, out_row_ctr, out_rows_avail);
-
-  /* Has postprocessor consumed all the data yet? If so, mark buffer empty */
-  if (main->rowgroup_ctr >= rowgroups_avail) {
-    main->buffer_full = FALSE;
-    main->rowgroup_ctr = 0;
-  }
+  (*cinfo->post->post_process_data) (cinfo, mainp->buffer,
+			&mainp->rowgroup_ctr, mainp->rowgroups_avail,
+			output_buf, out_row_ctr, out_rows_avail);
 }
 
 
@@ -386,15 +379,15 @@ process_data_context_main (j_decompress_ptr cinfo,
 			   JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
 			   JDIMENSION out_rows_avail)
 {
-  my_main_ptr main = (my_main_ptr) cinfo->main;
+  my_main_ptr mainp = (my_main_ptr) cinfo->main;
 
   /* Read input data if we haven't filled the main buffer yet */
-  if (! main->buffer_full) {
+  if (! mainp->buffer_full) {
     if (! (*cinfo->coef->decompress_data) (cinfo,
-					   main->xbuffer[main->whichptr]))
+					   mainp->xbuffer[mainp->whichptr]))
       return;			/* suspension forced, can do nothing more */
-    main->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
-    main->iMCU_row_ctr++;	/* count rows received */
+    mainp->buffer_full = TRUE;	/* OK, we have an iMCU row to work with */
+    mainp->iMCU_row_ctr++;	/* count rows received */
   }
 
   /* Postprocessor typically will not swallow all the input data it is handed
@@ -402,47 +395,47 @@ process_data_context_main (j_decompress_ptr cinfo,
    * to exit and restart.  This switch lets us keep track of how far we got.
    * Note that each case falls through to the next on successful completion.
    */
-  switch (main->context_state) {
+  switch (mainp->context_state) {
   case CTX_POSTPONED_ROW:
     /* Call postprocessor using previously set pointers for postponed row */
-    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
-			&main->rowgroup_ctr, main->rowgroups_avail,
+    (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr],
+			&mainp->rowgroup_ctr, mainp->rowgroups_avail,
 			output_buf, out_row_ctr, out_rows_avail);
-    if (main->rowgroup_ctr < main->rowgroups_avail)
+    if (mainp->rowgroup_ctr < mainp->rowgroups_avail)
       return;			/* Need to suspend */
-    main->context_state = CTX_PREPARE_FOR_IMCU;
+    mainp->context_state = CTX_PREPARE_FOR_IMCU;
     if (*out_row_ctr >= out_rows_avail)
       return;			/* Postprocessor exactly filled output buf */
     /*FALLTHROUGH*/
   case CTX_PREPARE_FOR_IMCU:
     /* Prepare to process first M-1 row groups of this iMCU row */
-    main->rowgroup_ctr = 0;
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size - 1);
+    mainp->rowgroup_ctr = 0;
+    mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1);
     /* Check for bottom of image: if so, tweak pointers to "duplicate"
      * the last sample row, and adjust rowgroups_avail to ignore padding rows.
      */
-    if (main->iMCU_row_ctr == cinfo->total_iMCU_rows)
+    if (mainp->iMCU_row_ctr == cinfo->total_iMCU_rows)
       set_bottom_pointers(cinfo);
-    main->context_state = CTX_PROCESS_IMCU;
+    mainp->context_state = CTX_PROCESS_IMCU;
     /*FALLTHROUGH*/
   case CTX_PROCESS_IMCU:
     /* Call postprocessor using previously set pointers */
-    (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr],
-			&main->rowgroup_ctr, main->rowgroups_avail,
+    (*cinfo->post->post_process_data) (cinfo, mainp->xbuffer[mainp->whichptr],
+			&mainp->rowgroup_ctr, mainp->rowgroups_avail,
 			output_buf, out_row_ctr, out_rows_avail);
-    if (main->rowgroup_ctr < main->rowgroups_avail)
+    if (mainp->rowgroup_ctr < mainp->rowgroups_avail)
       return;			/* Need to suspend */
     /* After the first iMCU, change wraparound pointers to normal state */
-    if (main->iMCU_row_ctr == 1)
+    if (mainp->iMCU_row_ctr == 1)
       set_wraparound_pointers(cinfo);
     /* Prepare to load new iMCU row using other xbuffer list */
-    main->whichptr ^= 1;	/* 0=>1 or 1=>0 */
-    main->buffer_full = FALSE;
+    mainp->whichptr ^= 1;	/* 0=>1 or 1=>0 */
+    mainp->buffer_full = FALSE;
     /* Still need to process last row group of this iMCU row, */
     /* which is saved at index M+1 of the other xbuffer */
-    main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_scaled_size + 1);
-    main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_scaled_size + 2);
-    main->context_state = CTX_POSTPONED_ROW;
+    mainp->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1);
+    mainp->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2);
+    mainp->context_state = CTX_POSTPONED_ROW;
   }
 }
 
@@ -475,15 +468,15 @@ process_data_crank_post (j_decompress_ptr cinfo,
 GLOBAL(void)
 jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
 {
-  my_main_ptr main;
+  my_main_ptr mainp;
   int ci, rgroup, ngroups;
   jpeg_component_info *compptr;
 
-  main = (my_main_ptr)
+  mainp = (my_main_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_main_controller));
-  cinfo->main = (struct jpeg_d_main_controller *) main;
-  main->pub.start_pass = start_pass_main;
+  cinfo->main = &mainp->pub;
+  mainp->pub.start_pass = start_pass_main;
 
   if (need_full_buffer)		/* shouldn't happen */
     ERREXIT(cinfo, JERR_BAD_BUFFER_MODE);
@@ -492,21 +485,23 @@ jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer)
    * ngroups is the number of row groups we need.
    */
   if (cinfo->upsample->need_context_rows) {
-    if (cinfo->min_DCT_scaled_size < 2) /* unsupported, see comments above */
+    if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */
       ERREXIT(cinfo, JERR_NOTIMPL);
     alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */
-    ngroups = cinfo->min_DCT_scaled_size + 2;
+    ngroups = cinfo->min_DCT_v_scaled_size + 2;
   } else {
-    ngroups = cinfo->min_DCT_scaled_size;
+    /* There are always min_DCT_v_scaled_size row groups in an iMCU row. */
+    ngroups = cinfo->min_DCT_v_scaled_size;
+    mainp->rowgroups_avail = (JDIMENSION) ngroups;
   }
 
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    rgroup = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-      cinfo->min_DCT_scaled_size; /* height of a row group of component */
-    main->buffer[ci] = (*cinfo->mem->alloc_sarray)
-			((j_common_ptr) cinfo, JPOOL_IMAGE,
-			 compptr->width_in_blocks * compptr->DCT_scaled_size,
-			 (JDIMENSION) (rgroup * ngroups));
+    rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+      cinfo->min_DCT_v_scaled_size; /* height of a row group of component */
+    mainp->buffer[ci] = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       compptr->width_in_blocks * ((JDIMENSION) compptr->DCT_h_scaled_size),
+       (JDIMENSION) (rgroup * ngroups));
   }
 }

jdmarker.c

@@ -2,6 +2,7 @@
  * jdmarker.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2009-2013 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -22,24 +23,24 @@ typedef enum {			/* JPEG marker codes */
   M_SOF1  = 0xc1,
   M_SOF2  = 0xc2,
   M_SOF3  = 0xc3,
-  
+
   M_SOF5  = 0xc5,
   M_SOF6  = 0xc6,
   M_SOF7  = 0xc7,
-  
+
   M_JPG   = 0xc8,
   M_SOF9  = 0xc9,
   M_SOF10 = 0xca,
   M_SOF11 = 0xcb,
-  
+
   M_SOF13 = 0xcd,
   M_SOF14 = 0xce,
   M_SOF15 = 0xcf,
-  
+
   M_DHT   = 0xc4,
-  
+
   M_DAC   = 0xcc,
-  
+
   M_RST0  = 0xd0,
   M_RST1  = 0xd1,
   M_RST2  = 0xd2,
@@ -48,7 +49,7 @@ typedef enum {			/* JPEG marker codes */
   M_RST5  = 0xd5,
   M_RST6  = 0xd6,
   M_RST7  = 0xd7,
-  
+
   M_SOI   = 0xd8,
   M_EOI   = 0xd9,
   M_SOS   = 0xda,
@@ -57,7 +58,7 @@ typedef enum {			/* JPEG marker codes */
   M_DRI   = 0xdd,
   M_DHP   = 0xde,
   M_EXP   = 0xdf,
-  
+
   M_APP0  = 0xe0,
   M_APP1  = 0xe1,
   M_APP2  = 0xe2,
@@ -74,13 +75,14 @@ typedef enum {			/* JPEG marker codes */
   M_APP13 = 0xed,
   M_APP14 = 0xee,
   M_APP15 = 0xef,
-  
+
   M_JPG0  = 0xf0,
+  M_JPG8  = 0xf8,
   M_JPG13 = 0xfd,
   M_COM   = 0xfe,
-  
+
   M_TEM   = 0x01,
-  
+
   M_ERROR = 0x100
 } JPEG_MARKER;
 
@@ -216,6 +218,7 @@ get_soi (j_decompress_ptr cinfo)
   /* Set initial assumptions for colorspace etc */
 
   cinfo->jpeg_color_space = JCS_UNKNOWN;
+  cinfo->color_transform = JCT_NONE;
   cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */
 
   cinfo->saw_JFIF_marker = FALSE;
@@ -234,14 +237,16 @@ get_soi (j_decompress_ptr cinfo)
 
 
 LOCAL(boolean)
-get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
+get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog,
+	 boolean is_arith)
 /* Process a SOFn marker */
 {
   INT32 length;
-  int c, ci;
+  int c, ci, i;
   jpeg_component_info * compptr;
   INPUT_VARS(cinfo);
 
+  cinfo->is_baseline = is_baseline;
   cinfo->progressive_mode = is_prog;
   cinfo->arith_code = is_arith;
 
@@ -264,8 +269,8 @@ get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
   /* We don't support files in which the image height is initially specified */
   /* as 0 and is later redefined by DNL.  As long as we have to check that,  */
   /* might as well have a general sanity check. */
-  if (cinfo->image_height <= 0 || cinfo->image_width <= 0
-      || cinfo->num_components <= 0)
+  if (cinfo->image_height <= 0 || cinfo->image_width <= 0 ||
+      cinfo->num_components <= 0)
     ERREXIT(cinfo, JERR_EMPTY_IMAGE);
 
   if (length != (cinfo->num_components * 3))
@@ -275,11 +280,27 @@ get_sof (j_decompress_ptr cinfo, boolean is_prog, boolean is_arith)
     cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small)
 			((j_common_ptr) cinfo, JPOOL_IMAGE,
 			 cinfo->num_components * SIZEOF(jpeg_component_info));
-  
-  for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
-       ci++, compptr++) {
+
+  for (ci = 0; ci < cinfo->num_components; ci++) {
+    INPUT_BYTE(cinfo, c, return FALSE);
+    /* Check to see whether component id has already been seen   */
+    /* (in violation of the spec, but unfortunately seen in some */
+    /* files).  If so, create "fake" component id equal to the   */
+    /* max id seen so far + 1. */
+    for (i = 0, compptr = cinfo->comp_info; i < ci; i++, compptr++) {
+      if (c == compptr->component_id) {
+	compptr = cinfo->comp_info;
+	c = compptr->component_id;
+	compptr++;
+	for (i = 1; i < ci; i++, compptr++) {
+	  if (compptr->component_id > c) c = compptr->component_id;
+	}
+	c++;
+	break;
+      }
+    }
+    compptr->component_id = c;
     compptr->component_index = ci;
-    INPUT_BYTE(cinfo, compptr->component_id, return FALSE);
     INPUT_BYTE(cinfo, c, return FALSE);
     compptr->h_samp_factor = (c >> 4) & 15;
     compptr->v_samp_factor = (c     ) & 15;
@@ -302,12 +323,12 @@ get_sos (j_decompress_ptr cinfo)
 /* Process a SOS marker */
 {
   INT32 length;
-  int i, ci, n, c, cc;
+  int c, ci, i, n;
   jpeg_component_info * compptr;
   INPUT_VARS(cinfo);
 
   if (! cinfo->marker->saw_SOF)
-    ERREXIT(cinfo, JERR_SOS_NO_SOF);
+    ERREXITS(cinfo, JERR_SOF_BEFORE, "SOS");
 
   INPUT_2BYTES(cinfo, length, return FALSE);
 
@@ -315,7 +336,9 @@ get_sos (j_decompress_ptr cinfo)
 
   TRACEMS1(cinfo, 1, JTRC_SOS, n);
 
-  if (length != (n * 2 + 6) || n < 1 || n > MAX_COMPS_IN_SCAN)
+  if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN ||
+      (n == 0 && !cinfo->progressive_mode))
+      /* pseudo SOS marker only allowed in progressive mode */
     ERREXIT(cinfo, JERR_BAD_LENGTH);
 
   cinfo->comps_in_scan = n;
@@ -323,24 +346,41 @@ get_sos (j_decompress_ptr cinfo)
   /* Collect the component-spec parameters */
 
   for (i = 0; i < n; i++) {
-    INPUT_BYTE(cinfo, cc, return FALSE);
     INPUT_BYTE(cinfo, c, return FALSE);
-    
+
+    /* Detect the case where component id's are not unique, and, if so, */
+    /* create a fake component id using the same logic as in get_sof.   */
+    /* Note:  This also ensures that all of the SOF components are      */
+    /* referenced in the single scan case, which prevents access to     */
+    /* uninitialized memory in later decoding stages. */
+    for (ci = 0; ci < i; ci++) {
+      if (c == cinfo->cur_comp_info[ci]->component_id) {
+	c = cinfo->cur_comp_info[0]->component_id;
+	for (ci = 1; ci < i; ci++) {
+	  compptr = cinfo->cur_comp_info[ci];
+	  if (compptr->component_id > c) c = compptr->component_id;
+	}
+	c++;
+	break;
+      }
+    }
+
     for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
 	 ci++, compptr++) {
-      if (cc == compptr->component_id)
+      if (c == compptr->component_id)
 	goto id_found;
     }
 
-    ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc);
+    ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, c);
 
   id_found:
 
     cinfo->cur_comp_info[i] = compptr;
+    INPUT_BYTE(cinfo, c, return FALSE);
     compptr->dc_tbl_no = (c >> 4) & 15;
     compptr->ac_tbl_no = (c     ) & 15;
-    
-    TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc,
+
+    TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, compptr->component_id,
 	     compptr->dc_tbl_no, compptr->ac_tbl_no);
   }
 
@@ -359,8 +399,8 @@ get_sos (j_decompress_ptr cinfo)
   /* Prepare to scan data & restart markers */
   cinfo->marker->next_restart_num = 0;
 
-  /* Count another SOS marker */
-  cinfo->input_scan_number++;
+  /* Count another (non-pseudo) SOS marker */
+  if (n) cinfo->input_scan_number++;
 
   INPUT_SYNC(cinfo);
   return TRUE;
@@ -456,6 +496,8 @@ get_dht (j_decompress_ptr cinfo)
     if (count > 256 || ((INT32) count) > length)
       ERREXIT(cinfo, JERR_BAD_HUFF_TABLE);
 
+    MEMZERO(huffval, SIZEOF(huffval)); /* pre-zero array for later copy */
+
     for (i = 0; i < count; i++)
       INPUT_BYTE(cinfo, huffval[i], return FALSE);
 
@@ -490,16 +532,18 @@ LOCAL(boolean)
 get_dqt (j_decompress_ptr cinfo)
 /* Process a DQT marker */
 {
-  INT32 length;
-  int n, i, prec;
+  INT32 length, count, i;
+  int n, prec;
   unsigned int tmp;
   JQUANT_TBL *quant_ptr;
+  const int *natural_order;
   INPUT_VARS(cinfo);
 
   INPUT_2BYTES(cinfo, length, return FALSE);
   length -= 2;
 
   while (length > 0) {
+    length--;
     INPUT_BYTE(cinfo, n, return FALSE);
     prec = n >> 4;
     n &= 0x0F;
@@ -513,13 +557,43 @@ get_dqt (j_decompress_ptr cinfo)
       cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo);
     quant_ptr = cinfo->quant_tbl_ptrs[n];
 
-    for (i = 0; i < DCTSIZE2; i++) {
+    if (prec) {
+      if (length < DCTSIZE2 * 2) {
+	/* Initialize full table for safety. */
+	for (i = 0; i < DCTSIZE2; i++) {
+	  quant_ptr->quantval[i] = 1;
+	}
+	count = length >> 1;
+      } else
+	count = DCTSIZE2;
+    } else {
+      if (length < DCTSIZE2) {
+	/* Initialize full table for safety. */
+	for (i = 0; i < DCTSIZE2; i++) {
+	  quant_ptr->quantval[i] = 1;
+	}
+	count = length;
+      } else
+	count = DCTSIZE2;
+    }
+
+    switch (count) {
+    case (2*2): natural_order = jpeg_natural_order2; break;
+    case (3*3): natural_order = jpeg_natural_order3; break;
+    case (4*4): natural_order = jpeg_natural_order4; break;
+    case (5*5): natural_order = jpeg_natural_order5; break;
+    case (6*6): natural_order = jpeg_natural_order6; break;
+    case (7*7): natural_order = jpeg_natural_order7; break;
+    default:    natural_order = jpeg_natural_order;  break;
+    }
+
+    for (i = 0; i < count; i++) {
       if (prec)
 	INPUT_2BYTES(cinfo, tmp, return FALSE);
       else
 	INPUT_BYTE(cinfo, tmp, return FALSE);
       /* We convert the zigzag-order table to natural array order. */
-      quant_ptr->quantval[jpeg_natural_order[i]] = (UINT16) tmp;
+      quant_ptr->quantval[natural_order[i]] = (UINT16) tmp;
     }
 
     if (cinfo->err->trace_level >= 2) {
@@ -532,8 +606,8 @@ get_dqt (j_decompress_ptr cinfo)
       }
     }
 
-    length -= DCTSIZE2+1;
-    if (prec) length -= DCTSIZE2;
+    length -= count;
+    if (prec) length -= count;
   }
 
   if (length != 0)
@@ -568,6 +642,68 @@ get_dri (j_decompress_ptr cinfo)
 }
 
 
+LOCAL(boolean)
+get_lse (j_decompress_ptr cinfo)
+/* Process an LSE marker */
+{
+  INT32 length;
+  unsigned int tmp;
+  int cid;
+  INPUT_VARS(cinfo);
+
+  if (! cinfo->marker->saw_SOF)
+    ERREXITS(cinfo, JERR_SOF_BEFORE, "LSE");
+
+  if (cinfo->num_components < 3) goto bad;
+
+  INPUT_2BYTES(cinfo, length, return FALSE);
+
+  if (length != 24)
+    ERREXIT(cinfo, JERR_BAD_LENGTH);
+
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0x0D)	/* ID inverse transform specification */
+    ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker);
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != MAXJSAMPLE) goto bad;		/* MAXTRANS */
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 3) goto bad;			/* Nt=3 */
+  INPUT_BYTE(cinfo, cid, return FALSE);
+  if (cid != cinfo->comp_info[1].component_id) goto bad;
+  INPUT_BYTE(cinfo, cid, return FALSE);
+  if (cid != cinfo->comp_info[0].component_id) goto bad;
+  INPUT_BYTE(cinfo, cid, return FALSE);
+  if (cid != cinfo->comp_info[2].component_id) goto bad;
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0x80) goto bad;		/* F1: CENTER1=1, NORM1=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;			/* A(1,1)=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;			/* A(1,2)=0 */
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;		/* F2: CENTER2=0, NORM2=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 1) goto bad;			/* A(2,1)=1 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;			/* A(2,2)=0 */
+  INPUT_BYTE(cinfo, tmp, return FALSE);
+  if (tmp != 0) goto bad;		/* F3: CENTER3=0, NORM3=0 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 1) goto bad;			/* A(3,1)=1 */
+  INPUT_2BYTES(cinfo, tmp, return FALSE);
+  if (tmp != 0) {				/* A(3,2)=0 */
+    bad:
+    ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL);
+  }
+
+  /* OK, valid transform that we can handle. */
+  cinfo->color_transform = JCT_SUBTRACT_GREEN;
+
+  INPUT_SYNC(cinfo);
+  return TRUE;
+}
+
+
 /*
  * Routines for processing APPn and COM markers.
  * These are either saved in memory or discarded, per application request.
@@ -604,12 +740,13 @@ examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data,
     cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]);
     cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]);
     /* Check version.
-     * Major version must be 1, anything else signals an incompatible change.
+     * Major version must be 1 or 2, anything else signals an incompatible
+     * change.
      * (We used to treat this as an error, but now it's a nonfatal warning,
      * because some bozo at Hijaak couldn't read the spec.)
      * Minor version should be 0..2, but process anyway if newer.
      */
-    if (cinfo->JFIF_major_version != 1)
+    if (cinfo->JFIF_major_version != 1 && cinfo->JFIF_major_version != 2)
       WARNMS2(cinfo, JWRN_JFIF_MAJOR,
 	      cinfo->JFIF_major_version, cinfo->JFIF_minor_version);
     /* Generate trace messages */
@@ -946,6 +1083,11 @@ first_marker (j_decompress_ptr cinfo)
  *
  * Returns same codes as are defined for jpeg_consume_input:
  * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
+ *
+ * Note: This function may return a pseudo SOS marker (with zero
+ * component number) for treat by input controller's consume_input.
+ * consume_input itself should filter out (skip) the pseudo marker
+ * after processing for the caller.
  */
 
 METHODDEF(int)
@@ -975,23 +1117,27 @@ read_markers (j_decompress_ptr cinfo)
       break;
 
     case M_SOF0:		/* Baseline */
+      if (! get_sof(cinfo, TRUE, FALSE, FALSE))
+	return JPEG_SUSPENDED;
+      break;
+
     case M_SOF1:		/* Extended sequential, Huffman */
-      if (! get_sof(cinfo, FALSE, FALSE))
+      if (! get_sof(cinfo, FALSE, FALSE, FALSE))
 	return JPEG_SUSPENDED;
       break;
 
     case M_SOF2:		/* Progressive, Huffman */
-      if (! get_sof(cinfo, TRUE, FALSE))
+      if (! get_sof(cinfo, FALSE, TRUE, FALSE))
 	return JPEG_SUSPENDED;
       break;
 
     case M_SOF9:		/* Extended sequential, arithmetic */
-      if (! get_sof(cinfo, FALSE, TRUE))
+      if (! get_sof(cinfo, FALSE, FALSE, TRUE))
 	return JPEG_SUSPENDED;
       break;
 
     case M_SOF10:		/* Progressive, arithmetic */
-      if (! get_sof(cinfo, TRUE, TRUE))
+      if (! get_sof(cinfo, FALSE, TRUE, TRUE))
 	return JPEG_SUSPENDED;
       break;
 
@@ -1013,32 +1159,37 @@ read_markers (j_decompress_ptr cinfo)
 	return JPEG_SUSPENDED;
       cinfo->unread_marker = 0;	/* processed the marker */
       return JPEG_REACHED_SOS;
-    
+
     case M_EOI:
       TRACEMS(cinfo, 1, JTRC_EOI);
       cinfo->unread_marker = 0;	/* processed the marker */
       return JPEG_REACHED_EOI;
-      
+
     case M_DAC:
       if (! get_dac(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_DHT:
       if (! get_dht(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_DQT:
       if (! get_dqt(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_DRI:
       if (! get_dri(cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
+    case M_JPG8:
+      if (! get_lse(cinfo))
+	return JPEG_SUSPENDED;
+      break;
+
     case M_APP0:
     case M_APP1:
     case M_APP2:
@@ -1059,7 +1210,7 @@ read_markers (j_decompress_ptr cinfo)
 		cinfo->unread_marker - (int) M_APP0]) (cinfo))
 	return JPEG_SUSPENDED;
       break;
-      
+
     case M_COM:
       if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo))
 	return JPEG_SUSPENDED;
@@ -1268,7 +1419,7 @@ jinit_marker_reader (j_decompress_ptr cinfo)
   marker = (my_marker_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT,
 				SIZEOF(my_marker_reader));
-  cinfo->marker = (struct jpeg_marker_reader *) marker;
+  cinfo->marker = &marker->pub;
   /* Initialize public method pointers */
   marker->pub.reset_marker_reader = reset_marker_reader;
   marker->pub.read_markers = read_markers;

jdmaster.c

@@ -2,7 +2,7 @@
  * jdmaster.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
- * Copyright (C) 2009, D. R. Commander.
+ * Modified 2002-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -45,19 +45,26 @@ LOCAL(boolean)
 use_merged_upsample (j_decompress_ptr cinfo)
 {
 #ifdef UPSAMPLE_MERGING_SUPPORTED
-  /* Merging is the equivalent of plain box-filter upsampling */
-  if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling)
+  /* Merging is the equivalent of plain box-filter upsampling. */
+  /* The following condition is only needed if fancy shall select
+   * a different upsampling method.  In our current implementation
+   * fancy only affects the DCT scaling, thus we can use fancy
+   * upsampling and merged upsample simultaneously, in particular
+   * with scaled DCT sizes larger than the default DCTSIZE.
+   */
+#if 0
+  if (cinfo->do_fancy_upsampling)
+    return FALSE;
+#endif
+  if (cinfo->CCIR601_sampling)
     return FALSE;
   /* jdmerge.c only supports YCC=>RGB color conversion */
-  if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 ||
-      (cinfo->out_color_space != JCS_RGB &&
-      cinfo->out_color_space != JCS_EXT_RGB &&
-      cinfo->out_color_space != JCS_EXT_RGBX &&
-      cinfo->out_color_space != JCS_EXT_BGR &&
-      cinfo->out_color_space != JCS_EXT_BGRX &&
-      cinfo->out_color_space != JCS_EXT_XBGR &&
-      cinfo->out_color_space != JCS_EXT_XRGB) ||
-      cinfo->out_color_components != rgb_pixelsize[cinfo->out_color_space])
+  if ((cinfo->jpeg_color_space != JCS_YCbCr &&
+       cinfo->jpeg_color_space != JCS_BG_YCC) ||
+      cinfo->num_components != 3 ||
+      cinfo->out_color_space != JCS_RGB ||
+      cinfo->out_color_components != RGB_PIXELSIZE ||
+      cinfo->color_transform)
     return FALSE;
   /* and it only handles 2h1v or 2h2v sampling ratios */
   if (cinfo->comp_info[0].h_samp_factor != 2 ||
@@ -68,9 +75,12 @@ use_merged_upsample (j_decompress_ptr cinfo)
       cinfo->comp_info[2].v_samp_factor != 1)
     return FALSE;
   /* furthermore, it doesn't work if we've scaled the IDCTs differently */
-  if (cinfo->comp_info[0].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
-      cinfo->comp_info[1].DCT_scaled_size != cinfo->min_DCT_scaled_size ||
-      cinfo->comp_info[2].DCT_scaled_size != cinfo->min_DCT_scaled_size)
+  if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size ||
+      cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
+      cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size ||
+      cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size)
     return FALSE;
   /* ??? also need to test for upsample-time rescaling, when & if supported */
   return TRUE;			/* by golly, it'll work... */
@@ -89,7 +99,9 @@ use_merged_upsample (j_decompress_ptr cinfo)
 
 GLOBAL(void)
 jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
-/* Do computations that are needed before master selection phase */
+/* Do computations that are needed before master selection phase.
+ * This function is used for full decompression.
+ */
 {
 #ifdef IDCT_SCALING_SUPPORTED
   int ci;
@@ -100,52 +112,38 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
   if (cinfo->global_state != DSTATE_READY)
     ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state);
 
+  /* Compute core output image dimensions and DCT scaling choices. */
+  jpeg_core_output_dimensions(cinfo);
+
 #ifdef IDCT_SCALING_SUPPORTED
 
-  /* Compute actual output image dimensions and DCT scaling choices. */
-  if (cinfo->scale_num * 8 <= cinfo->scale_denom) {
-    /* Provide 1/8 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 8L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 8L);
-    cinfo->min_DCT_scaled_size = 1;
-  } else if (cinfo->scale_num * 4 <= cinfo->scale_denom) {
-    /* Provide 1/4 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 4L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 4L);
-    cinfo->min_DCT_scaled_size = 2;
-  } else if (cinfo->scale_num * 2 <= cinfo->scale_denom) {
-    /* Provide 1/2 scaling */
-    cinfo->output_width = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_width, 2L);
-    cinfo->output_height = (JDIMENSION)
-      jdiv_round_up((long) cinfo->image_height, 2L);
-    cinfo->min_DCT_scaled_size = 4;
-  } else {
-    /* Provide 1/1 scaling */
-    cinfo->output_width = cinfo->image_width;
-    cinfo->output_height = cinfo->image_height;
-    cinfo->min_DCT_scaled_size = DCTSIZE;
-  }
   /* In selecting the actual DCT scaling for each component, we try to
    * scale up the chroma components via IDCT scaling rather than upsampling.
    * This saves time if the upsampler gets to use 1:1 scaling.
-   * Note this code assumes that the supported DCT scalings are powers of 2.
+   * Note this code adapts subsampling ratios which are powers of 2.
    */
   for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components;
        ci++, compptr++) {
-    int ssize = cinfo->min_DCT_scaled_size;
-    while (ssize < DCTSIZE &&
-	   (compptr->h_samp_factor * ssize * 2 <=
-	    cinfo->max_h_samp_factor * cinfo->min_DCT_scaled_size) &&
-	   (compptr->v_samp_factor * ssize * 2 <=
-	    cinfo->max_v_samp_factor * cinfo->min_DCT_scaled_size)) {
+    int ssize = 1;
+    while (cinfo->min_DCT_h_scaled_size * ssize <=
+	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) {
       ssize = ssize * 2;
     }
-    compptr->DCT_scaled_size = ssize;
+    compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize;
+    ssize = 1;
+    while (cinfo->min_DCT_v_scaled_size * ssize <=
+	   (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) &&
+	   (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) {
+      ssize = ssize * 2;
+    }
+    compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize;
+
+    /* We don't support IDCT ratios larger than 2. */
+    if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2)
+	compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2;
+    else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2)
+	compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2;
   }
 
   /* Recompute downsampled dimensions of components;
@@ -156,23 +154,14 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
     /* Size in samples, after IDCT scaling */
     compptr->downsampled_width = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_width *
-		    (long) (compptr->h_samp_factor * compptr->DCT_scaled_size),
-		    (long) (cinfo->max_h_samp_factor * DCTSIZE));
+		    (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size),
+		    (long) (cinfo->max_h_samp_factor * cinfo->block_size));
     compptr->downsampled_height = (JDIMENSION)
       jdiv_round_up((long) cinfo->image_height *
-		    (long) (compptr->v_samp_factor * compptr->DCT_scaled_size),
-		    (long) (cinfo->max_v_samp_factor * DCTSIZE));
+		    (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size),
+		    (long) (cinfo->max_v_samp_factor * cinfo->block_size));
   }
 
-#else /* !IDCT_SCALING_SUPPORTED */
-
-  /* Hardwire it to "no scaling" */
-  cinfo->output_width = cinfo->image_width;
-  cinfo->output_height = cinfo->image_height;
-  /* jdinput.c has already initialized DCT_scaled_size to DCTSIZE,
-   * and has computed unscaled downsampled_width and downsampled_height.
-   */
-
 #endif /* IDCT_SCALING_SUPPORTED */
 
   /* Report number of components in selected colorspace. */
@@ -182,15 +171,11 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
     cinfo->out_color_components = 1;
     break;
   case JCS_RGB:
-  case JCS_EXT_RGB:
-  case JCS_EXT_RGBX:
-  case JCS_EXT_BGR:
-  case JCS_EXT_BGRX:
-  case JCS_EXT_XBGR:
-  case JCS_EXT_XRGB:
-    cinfo->out_color_components = rgb_pixelsize[cinfo->out_color_space];
+  case JCS_BG_RGB:
+    cinfo->out_color_components = RGB_PIXELSIZE;
     break;
   case JCS_YCbCr:
+  case JCS_BG_YCC:
     cinfo->out_color_components = 3;
     break;
   case JCS_CMYK:
@@ -226,30 +211,20 @@ jpeg_calc_output_dimensions (j_decompress_ptr cinfo)
  * These processes all use a common table prepared by the routine below.
  *
  * For most steps we can mathematically guarantee that the initial value
- * of x is within MAXJSAMPLE+1 of the legal range, so a table running from
- * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient.  But for the initial
- * limiting step (just after the IDCT), a wildly out-of-range value is 
- * possible if the input data is corrupt.  To avoid any chance of indexing
+ * of x is within 2*(MAXJSAMPLE+1) of the legal range, so a table running
+ * from -2*(MAXJSAMPLE+1) to 3*MAXJSAMPLE+2 is sufficient.  But for the
+ * initial limiting step (just after the IDCT), a wildly out-of-range value
+ * is possible if the input data is corrupt.  To avoid any chance of indexing
  * off the end of memory and getting a bad-pointer trap, we perform the
  * post-IDCT limiting thus:
- *		x = range_limit[x & MASK];
+ *		x = (sample_range_limit - SUBSET)[(x + CENTER) & MASK];
  * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit
  * samples.  Under normal circumstances this is more than enough range and
  * a correct output will be generated; with bogus input data the mask will
  * cause wraparound, and we will safely generate a bogus-but-in-range output.
  * For the post-IDCT step, we want to convert the data from signed to unsigned
  * representation by adding CENTERJSAMPLE at the same time that we limit it.
- * So the post-IDCT limiting table ends up looking like this:
- *   CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE,
- *   MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- *   0          (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times),
- *   0,1,...,CENTERJSAMPLE-1
- * Negative inputs select values from the upper half of the table after
- * masking.
- *
- * We can save some space by overlapping the start of the post-IDCT table
- * with the simpler range limiting table.  The post-IDCT table begins at
- * sample_range_limit + CENTERJSAMPLE.
+ * This is accomplished with SUBSET = CENTER - CENTERJSAMPLE.
  *
  * Note that the table is allocated in near data space on PCs; it's small
  * enough and used often enough to justify this.
@@ -262,25 +237,18 @@ prepare_range_limit_table (j_decompress_ptr cinfo)
   JSAMPLE * table;
   int i;
 
-  table = (JSAMPLE *)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-		(5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE));
-  table += (MAXJSAMPLE+1);	/* allow negative subscripts of simple table */
+  table = (JSAMPLE *) (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo,
+    JPOOL_IMAGE, (RANGE_CENTER * 2 + MAXJSAMPLE + 1) * SIZEOF(JSAMPLE));
+  /* First segment of range limit table: limit[x] = 0 for x < 0 */
+  MEMZERO(table, RANGE_CENTER * SIZEOF(JSAMPLE));
+  table += RANGE_CENTER;	/* allow negative subscripts of table */
   cinfo->sample_range_limit = table;
-  /* First segment of "simple" table: limit[x] = 0 for x < 0 */
-  MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE));
-  /* Main part of "simple" table: limit[x] = x */
+  /* Main part of range limit table: limit[x] = x */
   for (i = 0; i <= MAXJSAMPLE; i++)
     table[i] = (JSAMPLE) i;
-  table += CENTERJSAMPLE;	/* Point to where post-IDCT table starts */
-  /* End of simple table, rest of first half of post-IDCT table */
-  for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++)
+  /* End of range limit table: limit[x] = MAXJSAMPLE for x > MAXJSAMPLE */
+  for (; i <=  MAXJSAMPLE + RANGE_CENTER; i++)
     table[i] = MAXJSAMPLE;
-  /* Second half of post-IDCT table */
-  MEMZERO(table + (2 * (MAXJSAMPLE+1)),
-	  (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE));
-  MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE),
-	  cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE));
 }
 
 
@@ -303,10 +271,19 @@ master_selection (j_decompress_ptr cinfo)
   long samplesperrow;
   JDIMENSION jd_samplesperrow;
 
+  /* For now, precision must match compiled-in value... */
+  if (cinfo->data_precision != BITS_IN_JSAMPLE)
+    ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision);
+
   /* Initialize dimensions and other stuff */
   jpeg_calc_output_dimensions(cinfo);
   prepare_range_limit_table(cinfo);
 
+  /* Sanity check on image dimensions */
+  if (cinfo->output_height <= 0 || cinfo->output_width <= 0 ||
+      cinfo->out_color_components <= 0)
+    ERREXIT(cinfo, JERR_EMPTY_IMAGE);
+
   /* Width of an output scanline must be representable as JDIMENSION. */
   samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components;
   jd_samplesperrow = (JDIMENSION) samplesperrow;
@@ -383,17 +360,10 @@ master_selection (j_decompress_ptr cinfo)
   /* Inverse DCT */
   jinit_inverse_dct(cinfo);
   /* Entropy decoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef D_PROGRESSIVE_SUPPORTED
-      jinit_phuff_decoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
-      jinit_huff_decoder(cinfo);
+  if (cinfo->arith_code)
+    jinit_arith_decoder(cinfo);
+  else {
+    jinit_huff_decoder(cinfo);
   }
 
   /* Initialize principal buffer controllers. */
@@ -558,7 +528,7 @@ jinit_master_decompress (j_decompress_ptr cinfo)
   master = (my_master_ptr)
       (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				  SIZEOF(my_decomp_master));
-  cinfo->master = (struct jpeg_decomp_master *) master;
+  cinfo->master = &master->pub;
   master->pub.prepare_for_output_pass = prepare_for_output_pass;
   master->pub.finish_output_pass = finish_output_pass;
 

jdmerge.c

@@ -2,8 +2,7 @@
  * jdmerge.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
- * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
- * Copyright (C) 2009, D. R. Commander.
+ * Modified 2013-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -25,7 +24,7 @@
  * multiplications needed for color conversion.
  *
  * This file currently provides implementations for the following cases:
- *	YCbCr => RGB color conversion only.
+ *	YCC => RGB color conversion only (YCbCr or BG_YCC).
  *	Sampling ratios of 2h1v or 2h2v.
  *	No scaling needed at upsample time.
  *	Corner-aligned (non-CCIR601) sampling alignment.
@@ -37,11 +36,16 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
-#include "jsimd.h"
 
 #ifdef UPSAMPLE_MERGING_SUPPORTED
 
 
+#if RANGE_BITS < 2
+  /* Deliberate syntax err */
+  Sorry, this code requires 2 or more range extension bits.
+#endif
+
+
 /* Private subobject */
 
 typedef struct {
@@ -78,12 +82,13 @@ typedef my_upsampler * my_upsample_ptr;
 
 
 /*
- * Initialize tables for YCC->RGB colorspace conversion.
+ * Initialize tables for YCbCr->RGB and BG_YCC->RGB colorspace conversion.
  * This is taken directly from jdcolor.c; see that file for more info.
  */
 
 LOCAL(void)
 build_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Normal case, sYCC */
 {
   my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
   int i;
@@ -106,17 +111,57 @@ build_ycc_rgb_table (j_decompress_ptr cinfo)
   for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
     /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
     /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
-    /* Cr=>R value is nearest int to 1.40200 * x */
+    /* Cr=>R value is nearest int to 1.402 * x */
     upsample->Cr_r_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS);
-    /* Cb=>B value is nearest int to 1.77200 * x */
+		    RIGHT_SHIFT(FIX(1.402) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 1.772 * x */
     upsample->Cb_b_tab[i] = (int)
-		    RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS);
-    /* Cr=>G value is scaled-up -0.71414 * x */
-    upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x;
-    /* Cb=>G value is scaled-up -0.34414 * x */
+		    RIGHT_SHIFT(FIX(1.772) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -0.714136286 * x */
+    upsample->Cr_g_tab[i] = (- FIX(0.714136286)) * x;
+    /* Cb=>G value is scaled-up -0.344136286 * x */
     /* We also add in ONE_HALF so that need not do it in inner loop */
-    upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF;
+    upsample->Cb_g_tab[i] = (- FIX(0.344136286)) * x + ONE_HALF;
+  }
+}
+
+
+LOCAL(void)
+build_bg_ycc_rgb_table (j_decompress_ptr cinfo)
+/* Wide gamut case, bg-sYCC */
+{
+  my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample;
+  int i;
+  INT32 x;
+  SHIFT_TEMPS
+
+  upsample->Cr_r_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  upsample->Cb_b_tab = (int *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(int));
+  upsample->Cr_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+  upsample->Cb_g_tab = (INT32 *)
+    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
+				(MAXJSAMPLE+1) * SIZEOF(INT32));
+
+  for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) {
+    /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */
+    /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */
+    /* Cr=>R value is nearest int to 2.804 * x */
+    upsample->Cr_r_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(2.804) * x + ONE_HALF, SCALEBITS);
+    /* Cb=>B value is nearest int to 3.544 * x */
+    upsample->Cb_b_tab[i] = (int)
+		    RIGHT_SHIFT(FIX(3.544) * x + ONE_HALF, SCALEBITS);
+    /* Cr=>G value is scaled-up -1.428272572 * x */
+    upsample->Cr_g_tab[i] = (- FIX(1.428272572)) * x;
+    /* Cb=>G value is scaled-up -0.688272572 * x */
+    /* We also add in ONE_HALF so that need not do it in inner loop */
+    upsample->Cb_g_tab[i] = (- FIX(0.688272572)) * x + ONE_HALF;
   }
 }
 
@@ -253,32 +298,32 @@ h2v1_merged_upsample (j_decompress_ptr cinfo,
     /* Do the chroma part of the calculation */
     cb = GETJSAMPLE(*inptr1++);
     cr = GETJSAMPLE(*inptr2++);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     /* Fetch 2 Y values and emit 2 pixels */
     y  = GETJSAMPLE(*inptr0++);
-    outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
-    outptr += rgb_pixelsize[cinfo->out_color_space];
+    outptr[RGB_RED]   = range_limit[y + cred];
+    outptr[RGB_GREEN] = range_limit[y + cgreen];
+    outptr[RGB_BLUE]  = range_limit[y + cblue];
+    outptr += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr0++);
-    outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
-    outptr += rgb_pixelsize[cinfo->out_color_space];
+    outptr[RGB_RED]   = range_limit[y + cred];
+    outptr[RGB_GREEN] = range_limit[y + cgreen];
+    outptr[RGB_BLUE]  = range_limit[y + cblue];
+    outptr += RGB_PIXELSIZE;
   }
   /* If image width is odd, do the last output column separately */
   if (cinfo->output_width & 1) {
     cb = GETJSAMPLE(*inptr1);
     cr = GETJSAMPLE(*inptr2);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     y  = GETJSAMPLE(*inptr0);
-    outptr[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr[RGB_RED]   = range_limit[y + cred];
+    outptr[RGB_GREEN] = range_limit[y + cgreen];
+    outptr[RGB_BLUE]  = range_limit[y + cblue];
   }
 }
 
@@ -317,46 +362,46 @@ h2v2_merged_upsample (j_decompress_ptr cinfo,
     /* Do the chroma part of the calculation */
     cb = GETJSAMPLE(*inptr1++);
     cr = GETJSAMPLE(*inptr2++);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     /* Fetch 4 Y values and emit 4 pixels */
     y  = GETJSAMPLE(*inptr00++);
-    outptr0[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr0[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr0[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr0[RGB_RED]   = range_limit[y + cred];
+    outptr0[RGB_GREEN] = range_limit[y + cgreen];
+    outptr0[RGB_BLUE]  = range_limit[y + cblue];
     outptr0 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr00++);
-    outptr0[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr0[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr0[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr0[RGB_RED]   = range_limit[y + cred];
+    outptr0[RGB_GREEN] = range_limit[y + cgreen];
+    outptr0[RGB_BLUE]  = range_limit[y + cblue];
     outptr0 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr01++);
-    outptr1[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr1[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr1[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr1[RGB_RED]   = range_limit[y + cred];
+    outptr1[RGB_GREEN] = range_limit[y + cgreen];
+    outptr1[RGB_BLUE]  = range_limit[y + cblue];
     outptr1 += RGB_PIXELSIZE;
     y  = GETJSAMPLE(*inptr01++);
-    outptr1[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr1[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr1[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr1[RGB_RED]   = range_limit[y + cred];
+    outptr1[RGB_GREEN] = range_limit[y + cgreen];
+    outptr1[RGB_BLUE]  = range_limit[y + cblue];
     outptr1 += RGB_PIXELSIZE;
   }
   /* If image width is odd, do the last output column separately */
   if (cinfo->output_width & 1) {
     cb = GETJSAMPLE(*inptr1);
     cr = GETJSAMPLE(*inptr2);
-    cred = Crrtab[cr];
+    cred   = Crrtab[cr];
     cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS);
-    cblue = Cbbtab[cb];
+    cblue  = Cbbtab[cb];
     y  = GETJSAMPLE(*inptr00);
-    outptr0[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr0[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr0[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr0[RGB_RED]   = range_limit[y + cred];
+    outptr0[RGB_GREEN] = range_limit[y + cgreen];
+    outptr0[RGB_BLUE]  = range_limit[y + cblue];
     y  = GETJSAMPLE(*inptr01);
-    outptr1[rgb_red[cinfo->out_color_space]] =   range_limit[y + cred];
-    outptr1[rgb_green[cinfo->out_color_space]] = range_limit[y + cgreen];
-    outptr1[rgb_blue[cinfo->out_color_space]] =  range_limit[y + cblue];
+    outptr1[RGB_RED]   = range_limit[y + cred];
+    outptr1[RGB_GREEN] = range_limit[y + cgreen];
+    outptr1[RGB_BLUE]  = range_limit[y + cblue];
   }
 }
 
@@ -377,7 +422,7 @@ jinit_merged_upsampler (j_decompress_ptr cinfo)
   upsample = (my_upsample_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_upsampler));
-  cinfo->upsample = (struct jpeg_upsampler *) upsample;
+  cinfo->upsample = &upsample->pub;
   upsample->pub.start_pass = start_pass_merged_upsample;
   upsample->pub.need_context_rows = FALSE;
 
@@ -385,25 +430,22 @@ jinit_merged_upsampler (j_decompress_ptr cinfo)
 
   if (cinfo->max_v_samp_factor == 2) {
     upsample->pub.upsample = merged_2v_upsample;
-    if (jsimd_can_h2v2_merged_upsample())
-      upsample->upmethod = jsimd_h2v2_merged_upsample;
-    else
-      upsample->upmethod = h2v2_merged_upsample;
+    upsample->upmethod = h2v2_merged_upsample;
     /* Allocate a spare row buffer */
     upsample->spare_row = (JSAMPROW)
       (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 		(size_t) (upsample->out_row_width * SIZEOF(JSAMPLE)));
   } else {
     upsample->pub.upsample = merged_1v_upsample;
-    if (jsimd_can_h2v1_merged_upsample())
-      upsample->upmethod = jsimd_h2v1_merged_upsample;
-    else
-      upsample->upmethod = h2v1_merged_upsample;
+    upsample->upmethod = h2v1_merged_upsample;
     /* No spare row needed */
     upsample->spare_row = NULL;
   }
 
-  build_ycc_rgb_table(cinfo);
+  if (cinfo->jpeg_color_space == JCS_BG_YCC)
+    build_bg_ycc_rgb_table(cinfo);
+  else
+    build_ycc_rgb_table(cinfo);
 }
 
 #endif /* UPSAMPLE_MERGING_SUPPORTED */

jdphuff.c

@@ -1,668 +0,0 @@
-/*
- * jdphuff.c
- *
- * Copyright (C) 1995-1997, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains Huffman entropy decoding routines for progressive JPEG.
- *
- * Much of the complexity here has to do with supporting input suspension.
- * If the data source module demands suspension, we want to be able to back
- * up to the start of the current MCU.  To do this, we copy state variables
- * into local working storage, and update them back to the permanent
- * storage only upon successful completion of an MCU.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdhuff.h"		/* Declarations shared with jdhuff.c */
-
-
-#ifdef D_PROGRESSIVE_SUPPORTED
-
-/*
- * Expanded entropy decoder object for progressive Huffman decoding.
- *
- * The savable_state subrecord contains fields that change within an MCU,
- * but must not be updated permanently until we complete the MCU.
- */
-
-typedef struct {
-  unsigned int EOBRUN;			/* remaining EOBs in EOBRUN */
-  int last_dc_val[MAX_COMPS_IN_SCAN];	/* last DC coef for each component */
-} savable_state;
-
-/* This macro is to work around compilers with missing or broken
- * structure assignment.  You'll need to fix this code if you have
- * such a compiler and you change MAX_COMPS_IN_SCAN.
- */
-
-#ifndef NO_STRUCT_ASSIGN
-#define ASSIGN_STATE(dest,src)  ((dest) = (src))
-#else
-#if MAX_COMPS_IN_SCAN == 4
-#define ASSIGN_STATE(dest,src)  \
-	((dest).EOBRUN = (src).EOBRUN, \
-	 (dest).last_dc_val[0] = (src).last_dc_val[0], \
-	 (dest).last_dc_val[1] = (src).last_dc_val[1], \
-	 (dest).last_dc_val[2] = (src).last_dc_val[2], \
-	 (dest).last_dc_val[3] = (src).last_dc_val[3])
-#endif
-#endif
-
-
-typedef struct {
-  struct jpeg_entropy_decoder pub; /* public fields */
-
-  /* These fields are loaded into local variables at start of each MCU.
-   * In case of suspension, we exit WITHOUT updating them.
-   */
-  bitread_perm_state bitstate;	/* Bit buffer at start of MCU */
-  savable_state saved;		/* Other state at start of MCU */
-
-  /* These fields are NOT loaded into local working state. */
-  unsigned int restarts_to_go;	/* MCUs left in this restart interval */
-
-  /* Pointers to derived tables (these workspaces have image lifespan) */
-  d_derived_tbl * derived_tbls[NUM_HUFF_TBLS];
-
-  d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */
-} phuff_entropy_decoder;
-
-typedef phuff_entropy_decoder * phuff_entropy_ptr;
-
-/* Forward declarations */
-METHODDEF(boolean) decode_mcu_DC_first JPP((j_decompress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_AC_first JPP((j_decompress_ptr cinfo,
-					    JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_DC_refine JPP((j_decompress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-METHODDEF(boolean) decode_mcu_AC_refine JPP((j_decompress_ptr cinfo,
-					     JBLOCKROW *MCU_data));
-
-
-/*
- * Initialize for a Huffman-compressed scan.
- */
-
-METHODDEF(void)
-start_pass_phuff_decoder (j_decompress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  boolean is_DC_band, bad;
-  int ci, coefi, tbl;
-  int *coef_bit_ptr;
-  jpeg_component_info * compptr;
-
-  is_DC_band = (cinfo->Ss == 0);
-
-  /* Validate scan parameters */
-  bad = FALSE;
-  if (is_DC_band) {
-    if (cinfo->Se != 0)
-      bad = TRUE;
-  } else {
-    /* need not check Ss/Se < 0 since they came from unsigned bytes */
-    if (cinfo->Ss > cinfo->Se || cinfo->Se >= DCTSIZE2)
-      bad = TRUE;
-    /* AC scans may have only one component */
-    if (cinfo->comps_in_scan != 1)
-      bad = TRUE;
-  }
-  if (cinfo->Ah != 0) {
-    /* Successive approximation refinement scan: must have Al = Ah-1. */
-    if (cinfo->Al != cinfo->Ah-1)
-      bad = TRUE;
-  }
-  if (cinfo->Al > 13)		/* need not check for < 0 */
-    bad = TRUE;
-  /* Arguably the maximum Al value should be less than 13 for 8-bit precision,
-   * but the spec doesn't say so, and we try to be liberal about what we
-   * accept.  Note: large Al values could result in out-of-range DC
-   * coefficients during early scans, leading to bizarre displays due to
-   * overflows in the IDCT math.  But we won't crash.
-   */
-  if (bad)
-    ERREXIT4(cinfo, JERR_BAD_PROGRESSION,
-	     cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al);
-  /* Update progression status, and verify that scan order is legal.
-   * Note that inter-scan inconsistencies are treated as warnings
-   * not fatal errors ... not clear if this is right way to behave.
-   */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    int cindex = cinfo->cur_comp_info[ci]->component_index;
-    coef_bit_ptr = & cinfo->coef_bits[cindex][0];
-    if (!is_DC_band && coef_bit_ptr[0] < 0) /* AC without prior DC scan */
-      WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0);
-    for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) {
-      int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi];
-      if (cinfo->Ah != expected)
-	WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi);
-      coef_bit_ptr[coefi] = cinfo->Al;
-    }
-  }
-
-  /* Select MCU decoding routine */
-  if (cinfo->Ah == 0) {
-    if (is_DC_band)
-      entropy->pub.decode_mcu = decode_mcu_DC_first;
-    else
-      entropy->pub.decode_mcu = decode_mcu_AC_first;
-  } else {
-    if (is_DC_band)
-      entropy->pub.decode_mcu = decode_mcu_DC_refine;
-    else
-      entropy->pub.decode_mcu = decode_mcu_AC_refine;
-  }
-
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++) {
-    compptr = cinfo->cur_comp_info[ci];
-    /* Make sure requested tables are present, and compute derived tables.
-     * We may build same derived table more than once, but it's not expensive.
-     */
-    if (is_DC_band) {
-      if (cinfo->Ah == 0) {	/* DC refinement needs no table */
-	tbl = compptr->dc_tbl_no;
-	jpeg_make_d_derived_tbl(cinfo, TRUE, tbl,
-				& entropy->derived_tbls[tbl]);
-      }
-    } else {
-      tbl = compptr->ac_tbl_no;
-      jpeg_make_d_derived_tbl(cinfo, FALSE, tbl,
-			      & entropy->derived_tbls[tbl]);
-      /* remember the single active table */
-      entropy->ac_derived_tbl = entropy->derived_tbls[tbl];
-    }
-    /* Initialize DC predictions to 0 */
-    entropy->saved.last_dc_val[ci] = 0;
-  }
-
-  /* Initialize bitread state variables */
-  entropy->bitstate.bits_left = 0;
-  entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */
-  entropy->pub.insufficient_data = FALSE;
-
-  /* Initialize private state variables */
-  entropy->saved.EOBRUN = 0;
-
-  /* Initialize restart counter */
-  entropy->restarts_to_go = cinfo->restart_interval;
-}
-
-
-/*
- * Figure F.12: extend sign bit.
- * On some machines, a shift and add will be faster than a table lookup.
- */
-
-#ifdef AVOID_TABLES
-
-#define HUFF_EXTEND(x,s)  ((x) < (1<<((s)-1)) ? (x) + (((-1)<<(s)) + 1) : (x))
-
-#else
-
-#define HUFF_EXTEND(x,s)  ((x) < extend_test[s] ? (x) + extend_offset[s] : (x))
-
-static const int extend_test[16] =   /* entry n is 2**(n-1) */
-  { 0, 0x0001, 0x0002, 0x0004, 0x0008, 0x0010, 0x0020, 0x0040, 0x0080,
-    0x0100, 0x0200, 0x0400, 0x0800, 0x1000, 0x2000, 0x4000 };
-
-static const int extend_offset[16] = /* entry n is (-1 << n) + 1 */
-  { 0, ((-1)<<1) + 1, ((-1)<<2) + 1, ((-1)<<3) + 1, ((-1)<<4) + 1,
-    ((-1)<<5) + 1, ((-1)<<6) + 1, ((-1)<<7) + 1, ((-1)<<8) + 1,
-    ((-1)<<9) + 1, ((-1)<<10) + 1, ((-1)<<11) + 1, ((-1)<<12) + 1,
-    ((-1)<<13) + 1, ((-1)<<14) + 1, ((-1)<<15) + 1 };
-
-#endif /* AVOID_TABLES */
-
-
-/*
- * Check for a restart marker & resynchronize decoder.
- * Returns FALSE if must suspend.
- */
-
-LOCAL(boolean)
-process_restart (j_decompress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int ci;
-
-  /* Throw away any unused bits remaining in bit buffer; */
-  /* include any full bytes in next_marker's count of discarded bytes */
-  cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8;
-  entropy->bitstate.bits_left = 0;
-
-  /* Advance past the RSTn marker */
-  if (! (*cinfo->marker->read_restart_marker) (cinfo))
-    return FALSE;
-
-  /* Re-initialize DC predictions to 0 */
-  for (ci = 0; ci < cinfo->comps_in_scan; ci++)
-    entropy->saved.last_dc_val[ci] = 0;
-  /* Re-init EOB run count, too */
-  entropy->saved.EOBRUN = 0;
-
-  /* Reset restart counter */
-  entropy->restarts_to_go = cinfo->restart_interval;
-
-  /* Reset out-of-data flag, unless read_restart_marker left us smack up
-   * against a marker.  In that case we will end up treating the next data
-   * segment as empty, and we can avoid producing bogus output pixels by
-   * leaving the flag set.
-   */
-  if (cinfo->unread_marker == 0)
-    entropy->pub.insufficient_data = FALSE;
-
-  return TRUE;
-}
-
-
-/*
- * Huffman MCU decoding.
- * Each of these routines decodes and returns one MCU's worth of
- * Huffman-compressed coefficients. 
- * The coefficients are reordered from zigzag order into natural array order,
- * but are not dequantized.
- *
- * The i'th block of the MCU is stored into the block pointed to by
- * MCU_data[i].  WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER.
- *
- * We return FALSE if data source requested suspension.  In that case no
- * changes have been made to permanent state.  (Exception: some output
- * coefficients may already have been assigned.  This is harmless for
- * spectral selection, since we'll just re-assign them on the next call.
- * Successive approximation AC refinement has to be more careful, however.)
- */
-
-/*
- * MCU decoding for DC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int Al = cinfo->Al;
-  register int s, r;
-  int blkn, ci;
-  JBLOCKROW block;
-  BITREAD_STATE_VARS;
-  savable_state state;
-  d_derived_tbl * tbl;
-  jpeg_component_info * compptr;
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* If we've run out of data, just leave the MCU set to zeroes.
-   * This way, we return uniform gray for the remainder of the segment.
-   */
-  if (! entropy->pub.insufficient_data) {
-
-    /* Load up working state */
-    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-    ASSIGN_STATE(state, entropy->saved);
-
-    /* Outer loop handles each block in the MCU */
-
-    for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-      block = MCU_data[blkn];
-      ci = cinfo->MCU_membership[blkn];
-      compptr = cinfo->cur_comp_info[ci];
-      tbl = entropy->derived_tbls[compptr->dc_tbl_no];
-
-      /* Decode a single block's worth of coefficients */
-
-      /* Section F.2.2.1: decode the DC coefficient difference */
-      HUFF_DECODE(s, br_state, tbl, return FALSE, label1);
-      if (s) {
-	CHECK_BIT_BUFFER(br_state, s, return FALSE);
-	r = GET_BITS(s);
-	s = HUFF_EXTEND(r, s);
-      }
-
-      /* Convert DC difference to actual value, update last_dc_val */
-      s += state.last_dc_val[ci];
-      state.last_dc_val[ci] = s;
-      /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */
-      (*block)[0] = (JCOEF) (s << Al);
-    }
-
-    /* Completed MCU, so update state */
-    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-    ASSIGN_STATE(entropy->saved, state);
-  }
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-}
-
-
-/*
- * MCU decoding for AC initial scan (either spectral selection,
- * or first pass of successive approximation).
- */
-
-METHODDEF(boolean)
-decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int Se = cinfo->Se;
-  int Al = cinfo->Al;
-  register int s, k, r;
-  unsigned int EOBRUN;
-  JBLOCKROW block;
-  BITREAD_STATE_VARS;
-  d_derived_tbl * tbl;
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* If we've run out of data, just leave the MCU set to zeroes.
-   * This way, we return uniform gray for the remainder of the segment.
-   */
-  if (! entropy->pub.insufficient_data) {
-
-    /* Load up working state.
-     * We can avoid loading/saving bitread state if in an EOB run.
-     */
-    EOBRUN = entropy->saved.EOBRUN;	/* only part of saved state we need */
-
-    /* There is always only one block per MCU */
-
-    if (EOBRUN > 0)		/* if it's a band of zeroes... */
-      EOBRUN--;			/* ...process it now (we do nothing) */
-    else {
-      BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-      block = MCU_data[0];
-      tbl = entropy->ac_derived_tbl;
-
-      for (k = cinfo->Ss; k <= Se; k++) {
-	HUFF_DECODE(s, br_state, tbl, return FALSE, label2);
-	r = s >> 4;
-	s &= 15;
-	if (s) {
-	  k += r;
-	  CHECK_BIT_BUFFER(br_state, s, return FALSE);
-	  r = GET_BITS(s);
-	  s = HUFF_EXTEND(r, s);
-	  /* Scale and output coefficient in natural (dezigzagged) order */
-	  (*block)[jpeg_natural_order[k]] = (JCOEF) (s << Al);
-	} else {
-	  if (r == 15) {	/* ZRL */
-	    k += 15;		/* skip 15 zeroes in band */
-	  } else {		/* EOBr, run length is 2^r + appended bits */
-	    EOBRUN = 1 << r;
-	    if (r) {		/* EOBr, r > 0 */
-	      CHECK_BIT_BUFFER(br_state, r, return FALSE);
-	      r = GET_BITS(r);
-	      EOBRUN += r;
-	    }
-	    EOBRUN--;		/* this band is processed at this moment */
-	    break;		/* force end-of-band */
-	  }
-	}
-      }
-
-      BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-    }
-
-    /* Completed MCU, so update state */
-    entropy->saved.EOBRUN = EOBRUN;	/* only part of saved state we need */
-  }
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-}
-
-
-/*
- * MCU decoding for DC successive approximation refinement scan.
- * Note: we assume such scans can be multi-component, although the spec
- * is not very clear on the point.
- */
-
-METHODDEF(boolean)
-decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
-  int blkn;
-  JBLOCKROW block;
-  BITREAD_STATE_VARS;
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* Not worth the cycles to check insufficient_data here,
-   * since we will not change the data anyway if we read zeroes.
-   */
-
-  /* Load up working state */
-  BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-
-  /* Outer loop handles each block in the MCU */
-
-  for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) {
-    block = MCU_data[blkn];
-
-    /* Encoded data is simply the next bit of the two's-complement DC value */
-    CHECK_BIT_BUFFER(br_state, 1, return FALSE);
-    if (GET_BITS(1))
-      (*block)[0] |= p1;
-    /* Note: since we use |=, repeating the assignment later is safe */
-  }
-
-  /* Completed MCU, so update state */
-  BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-}
-
-
-/*
- * MCU decoding for AC successive approximation refinement scan.
- */
-
-METHODDEF(boolean)
-decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data)
-{   
-  phuff_entropy_ptr entropy = (phuff_entropy_ptr) cinfo->entropy;
-  int Se = cinfo->Se;
-  int p1 = 1 << cinfo->Al;	/* 1 in the bit position being coded */
-  int m1 = (-1) << cinfo->Al;	/* -1 in the bit position being coded */
-  register int s, k, r;
-  unsigned int EOBRUN;
-  JBLOCKROW block;
-  JCOEFPTR thiscoef;
-  BITREAD_STATE_VARS;
-  d_derived_tbl * tbl;
-  int num_newnz;
-  int newnz_pos[DCTSIZE2];
-
-  /* Process restart marker if needed; may have to suspend */
-  if (cinfo->restart_interval) {
-    if (entropy->restarts_to_go == 0)
-      if (! process_restart(cinfo))
-	return FALSE;
-  }
-
-  /* If we've run out of data, don't modify the MCU.
-   */
-  if (! entropy->pub.insufficient_data) {
-
-    /* Load up working state */
-    BITREAD_LOAD_STATE(cinfo,entropy->bitstate);
-    EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */
-
-    /* There is always only one block per MCU */
-    block = MCU_data[0];
-    tbl = entropy->ac_derived_tbl;
-
-    /* If we are forced to suspend, we must undo the assignments to any newly
-     * nonzero coefficients in the block, because otherwise we'd get confused
-     * next time about which coefficients were already nonzero.
-     * But we need not undo addition of bits to already-nonzero coefficients;
-     * instead, we can test the current bit to see if we already did it.
-     */
-    num_newnz = 0;
-
-    /* initialize coefficient loop counter to start of band */
-    k = cinfo->Ss;
-
-    if (EOBRUN == 0) {
-      for (; k <= Se; k++) {
-	HUFF_DECODE(s, br_state, tbl, goto undoit, label3);
-	r = s >> 4;
-	s &= 15;
-	if (s) {
-	  if (s != 1)		/* size of new coef should always be 1 */
-	    WARNMS(cinfo, JWRN_HUFF_BAD_CODE);
-	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-	  if (GET_BITS(1))
-	    s = p1;		/* newly nonzero coef is positive */
-	  else
-	    s = m1;		/* newly nonzero coef is negative */
-	} else {
-	  if (r != 15) {
-	    EOBRUN = 1 << r;	/* EOBr, run length is 2^r + appended bits */
-	    if (r) {
-	      CHECK_BIT_BUFFER(br_state, r, goto undoit);
-	      r = GET_BITS(r);
-	      EOBRUN += r;
-	    }
-	    break;		/* rest of block is handled by EOB logic */
-	  }
-	  /* note s = 0 for processing ZRL */
-	}
-	/* Advance over already-nonzero coefs and r still-zero coefs,
-	 * appending correction bits to the nonzeroes.  A correction bit is 1
-	 * if the absolute value of the coefficient must be increased.
-	 */
-	do {
-	  thiscoef = *block + jpeg_natural_order[k];
-	  if (*thiscoef != 0) {
-	    CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-	    if (GET_BITS(1)) {
-	      if ((*thiscoef & p1) == 0) { /* do nothing if already set it */
-		if (*thiscoef >= 0)
-		  *thiscoef += p1;
-		else
-		  *thiscoef += m1;
-	      }
-	    }
-	  } else {
-	    if (--r < 0)
-	      break;		/* reached target zero coefficient */
-	  }
-	  k++;
-	} while (k <= Se);
-	if (s) {
-	  int pos = jpeg_natural_order[k];
-	  /* Output newly nonzero coefficient */
-	  (*block)[pos] = (JCOEF) s;
-	  /* Remember its position in case we have to suspend */
-	  newnz_pos[num_newnz++] = pos;
-	}
-      }
-    }
-
-    if (EOBRUN > 0) {
-      /* Scan any remaining coefficient positions after the end-of-band
-       * (the last newly nonzero coefficient, if any).  Append a correction
-       * bit to each already-nonzero coefficient.  A correction bit is 1
-       * if the absolute value of the coefficient must be increased.
-       */
-      for (; k <= Se; k++) {
-	thiscoef = *block + jpeg_natural_order[k];
-	if (*thiscoef != 0) {
-	  CHECK_BIT_BUFFER(br_state, 1, goto undoit);
-	  if (GET_BITS(1)) {
-	    if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */
-	      if (*thiscoef >= 0)
-		*thiscoef += p1;
-	      else
-		*thiscoef += m1;
-	    }
-	  }
-	}
-      }
-      /* Count one block completed in EOB run */
-      EOBRUN--;
-    }
-
-    /* Completed MCU, so update state */
-    BITREAD_SAVE_STATE(cinfo,entropy->bitstate);
-    entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */
-  }
-
-  /* Account for restart interval (no-op if not using restarts) */
-  entropy->restarts_to_go--;
-
-  return TRUE;
-
-undoit:
-  /* Re-zero any output coefficients that we made newly nonzero */
-  while (num_newnz > 0)
-    (*block)[newnz_pos[--num_newnz]] = 0;
-
-  return FALSE;
-}
-
-
-/*
- * Module initialization routine for progressive Huffman entropy decoding.
- */
-
-GLOBAL(void)
-jinit_phuff_decoder (j_decompress_ptr cinfo)
-{
-  phuff_entropy_ptr entropy;
-  int *coef_bit_ptr;
-  int ci, i;
-
-  entropy = (phuff_entropy_ptr)
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				SIZEOF(phuff_entropy_decoder));
-  cinfo->entropy = (struct jpeg_entropy_decoder *) entropy;
-  entropy->pub.start_pass = start_pass_phuff_decoder;
-
-  /* Mark derived tables unallocated */
-  for (i = 0; i < NUM_HUFF_TBLS; i++) {
-    entropy->derived_tbls[i] = NULL;
-  }
-
-  /* Create progression status table */
-  cinfo->coef_bits = (int (*)[DCTSIZE2])
-    (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
-				cinfo->num_components*DCTSIZE2*SIZEOF(int));
-  coef_bit_ptr = & cinfo->coef_bits[0][0];
-  for (ci = 0; ci < cinfo->num_components; ci++) 
-    for (i = 0; i < DCTSIZE2; i++)
-      *coef_bit_ptr++ = -1;
-}
-
-#endif /* D_PROGRESSIVE_SUPPORTED */

jdsample.c

@@ -2,14 +2,14 @@
  * jdsample.c
  *
  * Copyright (C) 1991-1996, Thomas G. Lane.
- * Copyright 2009 Pierre Ossman <ossman@cendio.se> for Cendio AB
+ * Modified 2002-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
  * This file contains upsampling routines.
  *
  * Upsampling input data is counted in "row groups".  A row group
- * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size)
+ * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size)
  * sample rows of each component.  Upsampling will normally produce
  * max_v_samp_factor pixel rows from each row group (but this could vary
  * if the upsampler is applying a scale factor of its own).
@@ -22,7 +22,6 @@
 #define JPEG_INTERNALS
 #include "jinclude.h"
 #include "jpeglib.h"
-#include "jsimd.h"
 
 
 /* Pointer to routine to upsample a single component */
@@ -239,11 +238,11 @@ h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   register JSAMPROW inptr, outptr;
   register JSAMPLE invalue;
   JSAMPROW outend;
-  int inrow;
+  int outrow;
 
-  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
-    inptr = input_data[inrow];
-    outptr = output_data[inrow];
+  for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) {
+    inptr = input_data[outrow];
+    outptr = output_data[outrow];
     outend = outptr + cinfo->output_width;
     while (outptr < outend) {
       invalue = *inptr++;	/* don't need GETJSAMPLE() here */
@@ -287,112 +286,6 @@ h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
 }
 
 
-/*
- * Fancy processing for the common case of 2:1 horizontal and 1:1 vertical.
- *
- * The upsampling algorithm is linear interpolation between pixel centers,
- * also known as a "triangle filter".  This is a good compromise between
- * speed and visual quality.  The centers of the output pixels are 1/4 and 3/4
- * of the way between input pixel centers.
- *
- * A note about the "bias" calculations: when rounding fractional values to
- * integer, we do not want to always round 0.5 up to the next integer.
- * If we did that, we'd introduce a noticeable bias towards larger values.
- * Instead, this code is arranged so that 0.5 will be rounded up or down at
- * alternate pixel locations (a simple ordered dither pattern).
- */
-
-METHODDEF(void)
-h2v1_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		     JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr, outptr;
-  register int invalue;
-  register JDIMENSION colctr;
-  int inrow;
-
-  for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) {
-    inptr = input_data[inrow];
-    outptr = output_data[inrow];
-    /* Special case for first column */
-    invalue = GETJSAMPLE(*inptr++);
-    *outptr++ = (JSAMPLE) invalue;
-    *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(*inptr) + 2) >> 2);
-
-    for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
-      /* General case: 3/4 * nearer pixel + 1/4 * further pixel */
-      invalue = GETJSAMPLE(*inptr++) * 3;
-      *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(inptr[-2]) + 1) >> 2);
-      *outptr++ = (JSAMPLE) ((invalue + GETJSAMPLE(*inptr) + 2) >> 2);
-    }
-
-    /* Special case for last column */
-    invalue = GETJSAMPLE(*inptr);
-    *outptr++ = (JSAMPLE) ((invalue * 3 + GETJSAMPLE(inptr[-1]) + 1) >> 2);
-    *outptr++ = (JSAMPLE) invalue;
-  }
-}
-
-
-/*
- * Fancy processing for the common case of 2:1 horizontal and 2:1 vertical.
- * Again a triangle filter; see comments for h2v1 case, above.
- *
- * It is OK for us to reference the adjacent input rows because we demanded
- * context from the main buffer controller (see initialization code).
- */
-
-METHODDEF(void)
-h2v2_fancy_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-		     JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)
-{
-  JSAMPARRAY output_data = *output_data_ptr;
-  register JSAMPROW inptr0, inptr1, outptr;
-#if BITS_IN_JSAMPLE == 8
-  register int thiscolsum, lastcolsum, nextcolsum;
-#else
-  register INT32 thiscolsum, lastcolsum, nextcolsum;
-#endif
-  register JDIMENSION colctr;
-  int inrow, outrow, v;
-
-  inrow = outrow = 0;
-  while (outrow < cinfo->max_v_samp_factor) {
-    for (v = 0; v < 2; v++) {
-      /* inptr0 points to nearest input row, inptr1 points to next nearest */
-      inptr0 = input_data[inrow];
-      if (v == 0)		/* next nearest is row above */
-	inptr1 = input_data[inrow-1];
-      else			/* next nearest is row below */
-	inptr1 = input_data[inrow+1];
-      outptr = output_data[outrow++];
-
-      /* Special case for first column */
-      thiscolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-      nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 8) >> 4);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
-      lastcolsum = thiscolsum; thiscolsum = nextcolsum;
-
-      for (colctr = compptr->downsampled_width - 2; colctr > 0; colctr--) {
-	/* General case: 3/4 * nearer pixel + 1/4 * further pixel in each */
-	/* dimension, thus 9/16, 3/16, 3/16, 1/16 overall */
-	nextcolsum = GETJSAMPLE(*inptr0++) * 3 + GETJSAMPLE(*inptr1++);
-	*outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
-	*outptr++ = (JSAMPLE) ((thiscolsum * 3 + nextcolsum + 7) >> 4);
-	lastcolsum = thiscolsum; thiscolsum = nextcolsum;
-      }
-
-      /* Special case for last column */
-      *outptr++ = (JSAMPLE) ((thiscolsum * 3 + lastcolsum + 8) >> 4);
-      *outptr++ = (JSAMPLE) ((thiscolsum * 4 + 7) >> 4);
-    }
-    inrow++;
-  }
-}
-
-
 /*
  * Module initialization routine for upsampling.
  */
@@ -403,13 +296,12 @@ jinit_upsampler (j_decompress_ptr cinfo)
   my_upsample_ptr upsample;
   int ci;
   jpeg_component_info * compptr;
-  boolean need_buffer, do_fancy;
   int h_in_group, v_in_group, h_out_group, v_out_group;
 
   upsample = (my_upsample_ptr)
     (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE,
 				SIZEOF(my_upsampler));
-  cinfo->upsample = (struct jpeg_upsampler *) upsample;
+  cinfo->upsample = &upsample->pub;
   upsample->pub.start_pass = start_pass_upsample;
   upsample->pub.upsample = sep_upsample;
   upsample->pub.need_context_rows = FALSE; /* until we find out differently */
@@ -417,11 +309,6 @@ jinit_upsampler (j_decompress_ptr cinfo)
   if (cinfo->CCIR601_sampling)	/* this isn't supported */
     ERREXIT(cinfo, JERR_CCIR601_NOTIMPL);
 
-  /* jdmainct.c doesn't support context rows when min_DCT_scaled_size = 1,
-   * so don't ask for it.
-   */
-  do_fancy = cinfo->do_fancy_upsampling && cinfo->min_DCT_scaled_size > 1;
-
   /* Verify we can handle the sampling factors, select per-component methods,
    * and create storage as needed.
    */
@@ -430,51 +317,30 @@ jinit_upsampler (j_decompress_ptr cinfo)
     /* Compute size of an "input group" after IDCT scaling.  This many samples
      * are to be converted to max_h_samp_factor * max_v_samp_factor pixels.
      */
-    h_in_group = (compptr->h_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
-    v_in_group = (compptr->v_samp_factor * compptr->DCT_scaled_size) /
-		 cinfo->min_DCT_scaled_size;
+    h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) /
+		 cinfo->min_DCT_h_scaled_size;
+    v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) /
+		 cinfo->min_DCT_v_scaled_size;
     h_out_group = cinfo->max_h_samp_factor;
     v_out_group = cinfo->max_v_samp_factor;
     upsample->rowgroup_height[ci] = v_in_group; /* save for use later */
-    need_buffer = TRUE;
     if (! compptr->component_needed) {
       /* Don't bother to upsample an uninteresting component. */
       upsample->methods[ci] = noop_upsample;
-      need_buffer = FALSE;
-    } else if (h_in_group == h_out_group && v_in_group == v_out_group) {
+      continue;		/* don't need to allocate buffer */
+    }
+    if (h_in_group == h_out_group && v_in_group == v_out_group) {
       /* Fullsize components can be processed without any work. */
       upsample->methods[ci] = fullsize_upsample;
-      need_buffer = FALSE;
-    } else if (h_in_group * 2 == h_out_group &&
-	       v_in_group == v_out_group) {
-      /* Special cases for 2h1v upsampling */
-      if (do_fancy && compptr->downsampled_width > 2) {
-	if (jsimd_can_h2v1_fancy_upsample())
-	  upsample->methods[ci] = jsimd_h2v1_fancy_upsample;
-	else
-	  upsample->methods[ci] = h2v1_fancy_upsample;
-      } else {
-	if (jsimd_can_h2v1_upsample())
-	  upsample->methods[ci] = jsimd_h2v1_upsample;
-	else
-	  upsample->methods[ci] = h2v1_upsample;
-      }
+      continue;		/* don't need to allocate buffer */
+    }
+    if (h_in_group * 2 == h_out_group && v_in_group == v_out_group) {
+      /* Special case for 2h1v upsampling */
+      upsample->methods[ci] = h2v1_upsample;
     } else if (h_in_group * 2 == h_out_group &&
 	       v_in_group * 2 == v_out_group) {
-      /* Special cases for 2h2v upsampling */
-      if (do_fancy && compptr->downsampled_width > 2) {
-	if (jsimd_can_h2v2_fancy_upsample())
-	  upsample->methods[ci] = jsimd_h2v2_fancy_upsample;
-	else
-	  upsample->methods[ci] = h2v2_fancy_upsample;
-	upsample->pub.need_context_rows = TRUE;
-      } else {
-	if (jsimd_can_h2v2_upsample())
-	  upsample->methods[ci] = jsimd_h2v2_upsample;
-	else
-	  upsample->methods[ci] = h2v2_upsample;
-      }
+      /* Special case for 2h2v upsampling */
+      upsample->methods[ci] = h2v2_upsample;
     } else if ((h_out_group % h_in_group) == 0 &&
 	       (v_out_group % v_in_group) == 0) {
       /* Generic integral-factors upsampling method */
@@ -483,12 +349,10 @@ jinit_upsampler (j_decompress_ptr cinfo)
       upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group);
     } else
       ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL);
-    if (need_buffer) {
-      upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
-	((j_common_ptr) cinfo, JPOOL_IMAGE,
-	 (JDIMENSION) jround_up((long) cinfo->output_width,
-				(long) cinfo->max_h_samp_factor),
-	 (JDIMENSION) cinfo->max_v_samp_factor);
-    }
+    upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray)
+      ((j_common_ptr) cinfo, JPOOL_IMAGE,
+       (JDIMENSION) jround_up((long) cinfo->output_width,
+			      (long) cinfo->max_h_samp_factor),
+       (JDIMENSION) cinfo->max_v_samp_factor);
   }
 }

jdtrans.c

@@ -2,6 +2,7 @@
  * jdtrans.c
  *
  * Copyright (C) 1995-1997, Thomas G. Lane.
+ * Modified 2000-2009 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -99,18 +100,14 @@ transdecode_master_selection (j_decompress_ptr cinfo)
   /* This is effectively a buffered-image operation. */
   cinfo->buffered_image = TRUE;
 
+  /* Compute output image dimensions and related values. */
+  jpeg_core_output_dimensions(cinfo);
+
   /* Entropy decoding: either Huffman or arithmetic coding. */
-  if (cinfo->arith_code) {
-    ERREXIT(cinfo, JERR_ARITH_NOTIMPL);
-  } else {
-    if (cinfo->progressive_mode) {
-#ifdef D_PROGRESSIVE_SUPPORTED
-      jinit_phuff_decoder(cinfo);
-#else
-      ERREXIT(cinfo, JERR_NOT_COMPILED);
-#endif
-    } else
-      jinit_huff_decoder(cinfo);
+  if (cinfo->arith_code)
+    jinit_arith_decoder(cinfo);
+  else {
+    jinit_huff_decoder(cinfo);
   }
 
   /* Always get a full-image coefficient buffer. */

jerror.c

@@ -2,6 +2,7 @@
  * jerror.c
  *
  * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2012-2015 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -18,16 +19,16 @@
  * These routines are used by both the compression and decompression code.
  */
 
+#ifdef USE_WINDOWS_MESSAGEBOX
+#include <windows.h>
+#endif
+
 /* this is not a core library module, so it doesn't define JPEG_INTERNALS */
 #include "jinclude.h"
 #include "jpeglib.h"
 #include "jversion.h"
 #include "jerror.h"
 
-#ifdef USE_WINDOWS_MESSAGEBOX
-#include <windows.h>
-#endif
-
 #ifndef EXIT_FAILURE		/* define exit() codes if not provided */
 #define EXIT_FAILURE  1
 #endif
@@ -66,7 +67,7 @@ const char * const jpeg_std_message_table[] = {
  * or jpeg_destroy) at some point.
  */
 
-METHODDEF(void)
+METHODDEF(noreturn_t)
 error_exit (j_common_ptr cinfo)
 {
   /* Always display the message */

jerror.h

@@ -2,6 +2,7 @@
  * jerror.h
  *
  * Copyright (C) 1994-1997, Thomas G. Lane.
+ * Modified 1997-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -39,14 +40,15 @@ typedef enum {
 JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */
 
 /* For maintenance convenience, list is alphabetical by message code name */
-JMESSAGE(JERR_ARITH_NOTIMPL,
-	 "Sorry, there are legal restrictions on arithmetic coding")
 JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix")
 JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix")
 JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode")
 JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS")
+JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request")
 JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range")
-JMESSAGE(JERR_BAD_DCTSIZE, "IDCT output block size %d not supported")
+JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported")
+JMESSAGE(JERR_BAD_DROP_SAMPLING,
+	 "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c")
 JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition")
 JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace")
 JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace")
@@ -93,6 +95,7 @@ JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data")
 JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change")
 JMESSAGE(JERR_NOTIMPL, "Not implemented yet")
 JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time")
+JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined")
 JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported")
 JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined")
 JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image")
@@ -103,11 +106,11 @@ JMESSAGE(JERR_QUANT_COMPONENTS,
 	 "Cannot quantize more than %d color components")
 JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors")
 JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors")
+JMESSAGE(JERR_SOF_BEFORE, "Invalid JPEG file structure: %s before SOF")
 JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers")
 JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker")
 JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x")
 JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers")
-JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF")
 JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s")
 JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file")
 JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file")
@@ -170,6 +173,7 @@ JMESSAGE(JTRC_UNKNOWN_IDS,
 JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u")
 JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u")
 JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d")
+JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code")
 JMESSAGE(JWRN_BOGUS_PROGRESSION,
 	 "Inconsistent progression sequence for component %d coefficient %d")
 JMESSAGE(JWRN_EXTRANEOUS_DATA,
@@ -227,6 +231,15 @@ JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines")
    (cinfo)->err->msg_parm.i[2] = (p3), \
    (cinfo)->err->msg_parm.i[3] = (p4), \
    (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
+#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6)  \
+  ((cinfo)->err->msg_code = (code), \
+   (cinfo)->err->msg_parm.i[0] = (p1), \
+   (cinfo)->err->msg_parm.i[1] = (p2), \
+   (cinfo)->err->msg_parm.i[2] = (p3), \
+   (cinfo)->err->msg_parm.i[3] = (p4), \
+   (cinfo)->err->msg_parm.i[4] = (p5), \
+   (cinfo)->err->msg_parm.i[5] = (p6), \
+   (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo)))
 #define ERREXITS(cinfo,code,str)  \
   ((cinfo)->err->msg_code = (code), \
    strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \

jfdctflt.c

@@ -2,6 +2,7 @@
  * jfdctflt.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -47,50 +48,57 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
 /*
  * Perform the forward DCT on one block of samples.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
-jpeg_fdct_float (FAST_FLOAT * data)
+jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)
 {
   FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
   FAST_FLOAT tmp10, tmp11, tmp12, tmp13;
   FAST_FLOAT z1, z2, z3, z4, z5, z11, z13;
   FAST_FLOAT *dataptr;
+  JSAMPROW elemptr;
   int ctr;
 
   /* Pass 1: process rows. */
 
   dataptr = data;
-  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
-    tmp0 = dataptr[0] + dataptr[7];
-    tmp7 = dataptr[0] - dataptr[7];
-    tmp1 = dataptr[1] + dataptr[6];
-    tmp6 = dataptr[1] - dataptr[6];
-    tmp2 = dataptr[2] + dataptr[5];
-    tmp5 = dataptr[2] - dataptr[5];
-    tmp3 = dataptr[3] + dataptr[4];
-    tmp4 = dataptr[3] - dataptr[4];
-    
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Load data into workspace */
+    tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]));
+    tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]));
+    tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]));
+    tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]));
+    tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]));
+    tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]));
+    tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]));
+    tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]));
+
     /* Even part */
-    
+
     tmp10 = tmp0 + tmp3;	/* phase 2 */
     tmp13 = tmp0 - tmp3;
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
-    
-    dataptr[0] = tmp10 + tmp11; /* phase 3 */
+
+    /* Apply unsigned->signed conversion. */
+    dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
     dataptr[4] = tmp10 - tmp11;
-    
+
     z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */
     dataptr[2] = tmp13 + z1;	/* phase 5 */
     dataptr[6] = tmp13 - z1;
-    
+
     /* Odd part */
 
     tmp10 = tmp4 + tmp5;	/* phase 2 */
@@ -126,21 +134,21 @@ jpeg_fdct_float (FAST_FLOAT * data)
     tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
     tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
     tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
-    
+
     /* Even part */
-    
+
     tmp10 = tmp0 + tmp3;	/* phase 2 */
     tmp13 = tmp0 - tmp3;
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
-    
+
     dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
     dataptr[DCTSIZE*4] = tmp10 - tmp11;
-    
+
     z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */
     dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
     dataptr[DCTSIZE*6] = tmp13 - z1;
-    
+
     /* Odd part */
 
     tmp10 = tmp4 + tmp5;	/* phase 2 */

jfdctfst.c

@@ -2,6 +2,7 @@
  * jfdctfst.c
  *
  * Copyright (C) 1994-1996, Thomas G. Lane.
+ * Modified 2003-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -43,7 +44,7 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
@@ -108,45 +109,52 @@
 
 /*
  * Perform the forward DCT on one block of samples.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
-jpeg_fdct_ifast (DCTELEM * data)
+jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)
 {
   DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7;
   DCTELEM tmp10, tmp11, tmp12, tmp13;
   DCTELEM z1, z2, z3, z4, z5, z11, z13;
   DCTELEM *dataptr;
+  JSAMPROW elemptr;
   int ctr;
   SHIFT_TEMPS
 
   /* Pass 1: process rows. */
 
   dataptr = data;
-  for (ctr = DCTSIZE-1; ctr >= 0; ctr--) {
-    tmp0 = dataptr[0] + dataptr[7];
-    tmp7 = dataptr[0] - dataptr[7];
-    tmp1 = dataptr[1] + dataptr[6];
-    tmp6 = dataptr[1] - dataptr[6];
-    tmp2 = dataptr[2] + dataptr[5];
-    tmp5 = dataptr[2] - dataptr[5];
-    tmp3 = dataptr[3] + dataptr[4];
-    tmp4 = dataptr[3] - dataptr[4];
-    
+  for (ctr = 0; ctr < DCTSIZE; ctr++) {
+    elemptr = sample_data[ctr] + start_col;
+
+    /* Load data into workspace */
+    tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]);
+    tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]);
+    tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]);
+    tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]);
+    tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]);
+    tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]);
+    tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]);
+    tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]);
+
     /* Even part */
-    
+
     tmp10 = tmp0 + tmp3;	/* phase 2 */
     tmp13 = tmp0 - tmp3;
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
-    
-    dataptr[0] = tmp10 + tmp11; /* phase 3 */
+
+    /* Apply unsigned->signed conversion. */
+    dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */
     dataptr[4] = tmp10 - tmp11;
-    
+
     z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
     dataptr[2] = tmp13 + z1;	/* phase 5 */
     dataptr[6] = tmp13 - z1;
-    
+
     /* Odd part */
 
     tmp10 = tmp4 + tmp5;	/* phase 2 */
@@ -182,21 +190,21 @@ jpeg_fdct_ifast (DCTELEM * data)
     tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5];
     tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4];
     tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4];
-    
+
     /* Even part */
-    
+
     tmp10 = tmp0 + tmp3;	/* phase 2 */
     tmp13 = tmp0 - tmp3;
     tmp11 = tmp1 + tmp2;
     tmp12 = tmp1 - tmp2;
-    
+
     dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */
     dataptr[DCTSIZE*4] = tmp10 - tmp11;
-    
+
     z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */
     dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */
     dataptr[DCTSIZE*6] = tmp13 - z1;
-    
+
     /* Odd part */
 
     tmp10 = tmp4 + tmp5;	/* phase 2 */

jidctflt.c

@@ -2,6 +2,7 @@
  * jidctflt.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2010-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -49,7 +50,7 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
@@ -62,6 +63,8 @@
 
 /*
  * Perform dequantization and inverse DCT on one block of coefficients.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
@@ -79,7 +82,6 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   JSAMPLE *range_limit = IDCT_range_limit(cinfo);
   int ctr;
   FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */
-  SHIFT_TEMPS
 
   /* Pass 1: process columns from input, store into work array. */
 
@@ -95,14 +97,14 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * With typical images and quantization tables, half or more of the
      * column DCT calculations can be simplified this way.
      */
-    
+
     if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
 	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 &&
 	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 &&
 	inptr[DCTSIZE*7] == 0) {
       /* AC terms all zero */
       FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-      
+
       wsptr[DCTSIZE*0] = dcval;
       wsptr[DCTSIZE*1] = dcval;
       wsptr[DCTSIZE*2] = dcval;
@@ -111,13 +113,13 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
       wsptr[DCTSIZE*5] = dcval;
       wsptr[DCTSIZE*6] = dcval;
       wsptr[DCTSIZE*7] = dcval;
-      
+
       inptr++;			/* advance pointers to next column */
       quantptr++;
       wsptr++;
       continue;
     }
-    
+
     /* Even part */
 
     tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
@@ -135,7 +137,7 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp3 = tmp10 - tmp13;
     tmp1 = tmp11 + tmp12;
     tmp2 = tmp11 - tmp12;
-    
+
     /* Odd part */
 
     tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
@@ -152,12 +154,12 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */
 
     z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
-    tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */
-    tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */
+    tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */
 
     tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
     wsptr[DCTSIZE*0] = tmp0 + tmp7;
     wsptr[DCTSIZE*7] = tmp0 - tmp7;
@@ -165,16 +167,15 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     wsptr[DCTSIZE*6] = tmp1 - tmp6;
     wsptr[DCTSIZE*2] = tmp2 + tmp5;
     wsptr[DCTSIZE*5] = tmp2 - tmp5;
-    wsptr[DCTSIZE*4] = tmp3 + tmp4;
-    wsptr[DCTSIZE*3] = tmp3 - tmp4;
+    wsptr[DCTSIZE*3] = tmp3 + tmp4;
+    wsptr[DCTSIZE*4] = tmp3 - tmp4;
 
     inptr++;			/* advance pointers to next column */
     quantptr++;
     wsptr++;
   }
-  
+
   /* Pass 2: process rows from work array, store into output array. */
-  /* Note that we must descale the results by a factor of 8 == 2**3. */
 
   wsptr = workspace;
   for (ctr = 0; ctr < DCTSIZE; ctr++) {
@@ -184,14 +185,17 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
      * the simplification applies less often (typically 5% to 10% of the time).
      * And testing floats for zero is relatively expensive, so we don't bother.
      */
-    
+
     /* Even part */
 
-    tmp10 = wsptr[0] + wsptr[4];
-    tmp11 = wsptr[0] - wsptr[4];
+    /* Prepare range-limit and float->int conversion */
+    z5 = wsptr[0] + (((FAST_FLOAT) RANGE_CENTER) + ((FAST_FLOAT) 0.5));
+    tmp10 = z5 + wsptr[4];
+    tmp11 = z5 - wsptr[4];
 
     tmp13 = wsptr[2] + wsptr[6];
-    tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13;
+    tmp12 = (wsptr[2] - wsptr[6]) *
+	      ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */
 
     tmp0 = tmp10 + tmp13;
     tmp3 = tmp10 - tmp13;
@@ -205,36 +209,28 @@ jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     z11 = wsptr[1] + wsptr[7];
     z12 = wsptr[1] - wsptr[7];
 
-    tmp7 = z11 + z13;
-    tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562);
+    tmp7 = z11 + z13;		/* phase 5 */
+    tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */
 
     z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */
-    tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */
-    tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */
+    tmp10 = z5 - z12 * ((FAST_FLOAT) 1.082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - z10 * ((FAST_FLOAT) 2.613125930); /* 2*(c2+c6) */
 
-    tmp6 = tmp12 - tmp7;
+    tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
-    /* Final output stage: scale down by a factor of 8 and range-limit */
+    /* Final output stage: float->int conversion and range-limit */
+
+    outptr[0] = range_limit[(int) (tmp0 + tmp7) & RANGE_MASK];
+    outptr[7] = range_limit[(int) (tmp0 - tmp7) & RANGE_MASK];
+    outptr[1] = range_limit[(int) (tmp1 + tmp6) & RANGE_MASK];
+    outptr[6] = range_limit[(int) (tmp1 - tmp6) & RANGE_MASK];
+    outptr[2] = range_limit[(int) (tmp2 + tmp5) & RANGE_MASK];
+    outptr[5] = range_limit[(int) (tmp2 - tmp5) & RANGE_MASK];
+    outptr[3] = range_limit[(int) (tmp3 + tmp4) & RANGE_MASK];
+    outptr[4] = range_limit[(int) (tmp3 - tmp4) & RANGE_MASK];
 
-    outptr[0] = range_limit[(int) DESCALE((INT32) (tmp0 + tmp7), 3)
-			    & RANGE_MASK];
-    outptr[7] = range_limit[(int) DESCALE((INT32) (tmp0 - tmp7), 3)
-			    & RANGE_MASK];
-    outptr[1] = range_limit[(int) DESCALE((INT32) (tmp1 + tmp6), 3)
-			    & RANGE_MASK];
-    outptr[6] = range_limit[(int) DESCALE((INT32) (tmp1 - tmp6), 3)
-			    & RANGE_MASK];
-    outptr[2] = range_limit[(int) DESCALE((INT32) (tmp2 + tmp5), 3)
-			    & RANGE_MASK];
-    outptr[5] = range_limit[(int) DESCALE((INT32) (tmp2 - tmp5), 3)
-			    & RANGE_MASK];
-    outptr[4] = range_limit[(int) DESCALE((INT32) (tmp3 + tmp4), 3)
-			    & RANGE_MASK];
-    outptr[3] = range_limit[(int) DESCALE((INT32) (tmp3 - tmp4), 3)
-			    & RANGE_MASK];
-    
     wsptr += DCTSIZE;		/* advance pointer to next row */
   }
 }

jidctfst.c

@@ -2,6 +2,7 @@
  * jidctfst.c
  *
  * Copyright (C) 1994-1998, Thomas G. Lane.
+ * Modified 2015-2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -45,7 +46,7 @@
  */
 
 #if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
+  Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */
 #endif
 
 
@@ -133,35 +134,10 @@
 #endif
 
 
-/* Like DESCALE, but applies to a DCTELEM and produces an int.
- * We assume that int right shift is unsigned if INT32 right shift is.
- */
-
-#ifdef RIGHT_SHIFT_IS_UNSIGNED
-#define ISHIFT_TEMPS	DCTELEM ishift_temp;
-#if BITS_IN_JSAMPLE == 8
-#define DCTELEMBITS  16		/* DCTELEM may be 16 or 32 bits */
-#else
-#define DCTELEMBITS  32		/* DCTELEM must be 32 bits */
-#endif
-#define IRIGHT_SHIFT(x,shft)  \
-    ((ishift_temp = (x)) < 0 ? \
-     (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \
-     (ishift_temp >> (shft)))
-#else
-#define ISHIFT_TEMPS
-#define IRIGHT_SHIFT(x,shft)	((x) >> (shft))
-#endif
-
-#ifdef USE_ACCURATE_ROUNDING
-#define IDESCALE(x,n)  ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n))
-#else
-#define IDESCALE(x,n)  ((int) IRIGHT_SHIFT(x, n))
-#endif
-
-
 /*
  * Perform dequantization and inverse DCT on one block of coefficients.
+ *
+ * cK represents cos(K*pi/16).
  */
 
 GLOBAL(void)
@@ -180,7 +156,7 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
   int ctr;
   int workspace[DCTSIZE2];	/* buffers data between passes */
   SHIFT_TEMPS			/* for DESCALE */
-  ISHIFT_TEMPS			/* for IDESCALE */
+  ISHIFT_TEMPS			/* for IRIGHT_SHIFT */
 
   /* Pass 1: process columns from input, store into work array. */
 
@@ -253,12 +229,12 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
 
     z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
-    tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
-    tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
+    tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */
 
     tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
     wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7);
     wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7);
@@ -266,21 +242,28 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6);
     wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5);
     wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5);
-    wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4);
-    wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4);
+    wsptr[DCTSIZE*3] = (int) (tmp3 + tmp4);
+    wsptr[DCTSIZE*4] = (int) (tmp3 - tmp4);
 
     inptr++;			/* advance pointers to next column */
     quantptr++;
     wsptr++;
   }
   
-  /* Pass 2: process rows from work array, store into output array. */
-  /* Note that we must descale the results by a factor of 8 == 2**3, */
-  /* and also undo the PASS1_BITS scaling. */
+  /* Pass 2: process rows from work array, store into output array.
+   * Note that we must descale the results by a factor of 8 == 2**3,
+   * and also undo the PASS1_BITS scaling.
+   */
 
   wsptr = workspace;
   for (ctr = 0; ctr < DCTSIZE; ctr++) {
     outptr = output_buf[ctr] + output_col;
+
+    /* Add range center and fudge factor for final descale and range-limit. */
+    z5 = (DCTELEM) wsptr[0] +
+	   ((((DCTELEM) RANGE_CENTER) << (PASS1_BITS+3)) +
+	    (1 << (PASS1_BITS+2)));
+
     /* Rows of zeroes can be exploited in the same way as we did with columns.
      * However, the column calculation has created many nonzero AC terms, so
      * the simplification applies less often (typically 5% to 10% of the time).
@@ -293,7 +276,7 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 &&
 	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
       /* AC terms all zero */
-      JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3)
+      JSAMPLE dcval = range_limit[(int) IRIGHT_SHIFT(z5, PASS1_BITS+3)
 				  & RANGE_MASK];
       
       outptr[0] = dcval;
@@ -312,12 +295,12 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     
     /* Even part */
 
-    tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]);
-    tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]);
+    tmp10 = z5 + (DCTELEM) wsptr[4];
+    tmp11 = z5 - (DCTELEM) wsptr[4];
 
-    tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]);
-    tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562)
-	    - tmp13;
+    tmp13 = (DCTELEM) wsptr[2] + (DCTELEM) wsptr[6];
+    tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6],
+		     FIX_1_414213562) - tmp13; /* 2*c4 */
 
     tmp0 = tmp10 + tmp13;
     tmp3 = tmp10 - tmp13;
@@ -335,30 +318,30 @@ jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr,
     tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */
 
     z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */
-    tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */
-    tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */
+    tmp10 = z5 - MULTIPLY(z12, FIX_1_082392200); /* 2*(c2-c6) */
+    tmp12 = z5 - MULTIPLY(z10, FIX_2_613125930); /* 2*(c2+c6) */
 
     tmp6 = tmp12 - tmp7;	/* phase 2 */
     tmp5 = tmp11 - tmp6;
-    tmp4 = tmp10 + tmp5;
+    tmp4 = tmp10 - tmp5;
 
     /* Final output stage: scale down by a factor of 8 and range-limit */
 
-    outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3)
+    outptr[0] = range_limit[(int) IRIGHT_SHIFT(tmp0 + tmp7, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3)
+    outptr[7] = range_limit[(int) IRIGHT_SHIFT(tmp0 - tmp7, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3)
+    outptr[1] = range_limit[(int) IRIGHT_SHIFT(tmp1 + tmp6, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3)
+    outptr[6] = range_limit[(int) IRIGHT_SHIFT(tmp1 - tmp6, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3)
+    outptr[2] = range_limit[(int) IRIGHT_SHIFT(tmp2 + tmp5, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3)
+    outptr[5] = range_limit[(int) IRIGHT_SHIFT(tmp2 - tmp5, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3)
+    outptr[3] = range_limit[(int) IRIGHT_SHIFT(tmp3 + tmp4, PASS1_BITS+3)
 			    & RANGE_MASK];
-    outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3)
+    outptr[4] = range_limit[(int) IRIGHT_SHIFT(tmp3 - tmp4, PASS1_BITS+3)
 			    & RANGE_MASK];
 
     wsptr += DCTSIZE;		/* advance pointer to next row */

jidctred.c

@@ -1,398 +0,0 @@
-/*
- * jidctred.c
- *
- * Copyright (C) 1994-1998, Thomas G. Lane.
- * This file is part of the Independent JPEG Group's software.
- * For conditions of distribution and use, see the accompanying README file.
- *
- * This file contains inverse-DCT routines that produce reduced-size output:
- * either 4x4, 2x2, or 1x1 pixels from an 8x8 DCT block.
- *
- * The implementation is based on the Loeffler, Ligtenberg and Moschytz (LL&M)
- * algorithm used in jidctint.c.  We simply replace each 8-to-8 1-D IDCT step
- * with an 8-to-4 step that produces the four averages of two adjacent outputs
- * (or an 8-to-2 step producing two averages of four outputs, for 2x2 output).
- * These steps were derived by computing the corresponding values at the end
- * of the normal LL&M code, then simplifying as much as possible.
- *
- * 1x1 is trivial: just take the DC coefficient divided by 8.
- *
- * See jidctint.c for additional comments.
- */
-
-#define JPEG_INTERNALS
-#include "jinclude.h"
-#include "jpeglib.h"
-#include "jdct.h"		/* Private declarations for DCT subsystem */
-
-#ifdef IDCT_SCALING_SUPPORTED
-
-
-/*
- * This module is specialized to the case DCTSIZE = 8.
- */
-
-#if DCTSIZE != 8
-  Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */
-#endif
-
-
-/* Scaling is the same as in jidctint.c. */
-
-#if BITS_IN_JSAMPLE == 8
-#define CONST_BITS  13
-#define PASS1_BITS  2
-#else
-#define CONST_BITS  13
-#define PASS1_BITS  1		/* lose a little precision to avoid overflow */
-#endif
-
-/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus
- * causing a lot of useless floating-point operations at run time.
- * To get around this we use the following pre-calculated constants.
- * If you change CONST_BITS you may want to add appropriate values.
- * (With a reasonable C compiler, you can just rely on the FIX() macro...)
- */
-
-#if CONST_BITS == 13
-#define FIX_0_211164243  ((INT32)  1730)	/* FIX(0.211164243) */
-#define FIX_0_509795579  ((INT32)  4176)	/* FIX(0.509795579) */
-#define FIX_0_601344887  ((INT32)  4926)	/* FIX(0.601344887) */
-#define FIX_0_720959822  ((INT32)  5906)	/* FIX(0.720959822) */
-#define FIX_0_765366865  ((INT32)  6270)	/* FIX(0.765366865) */
-#define FIX_0_850430095  ((INT32)  6967)	/* FIX(0.850430095) */
-#define FIX_0_899976223  ((INT32)  7373)	/* FIX(0.899976223) */
-#define FIX_1_061594337  ((INT32)  8697)	/* FIX(1.061594337) */
-#define FIX_1_272758580  ((INT32)  10426)	/* FIX(1.272758580) */
-#define FIX_1_451774981  ((INT32)  11893)	/* FIX(1.451774981) */
-#define FIX_1_847759065  ((INT32)  15137)	/* FIX(1.847759065) */
-#define FIX_2_172734803  ((INT32)  17799)	/* FIX(2.172734803) */
-#define FIX_2_562915447  ((INT32)  20995)	/* FIX(2.562915447) */
-#define FIX_3_624509785  ((INT32)  29692)	/* FIX(3.624509785) */
-#else
-#define FIX_0_211164243  FIX(0.211164243)
-#define FIX_0_509795579  FIX(0.509795579)
-#define FIX_0_601344887  FIX(0.601344887)
-#define FIX_0_720959822  FIX(0.720959822)
-#define FIX_0_765366865  FIX(0.765366865)
-#define FIX_0_850430095  FIX(0.850430095)
-#define FIX_0_899976223  FIX(0.899976223)
-#define FIX_1_061594337  FIX(1.061594337)
-#define FIX_1_272758580  FIX(1.272758580)
-#define FIX_1_451774981  FIX(1.451774981)
-#define FIX_1_847759065  FIX(1.847759065)
-#define FIX_2_172734803  FIX(2.172734803)
-#define FIX_2_562915447  FIX(2.562915447)
-#define FIX_3_624509785  FIX(3.624509785)
-#endif
-
-
-/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result.
- * For 8-bit samples with the recommended scaling, all the variable
- * and constant values involved are no more than 16 bits wide, so a
- * 16x16->32 bit multiply can be used instead of a full 32x32 multiply.
- * For 12-bit samples, a full 32-bit multiplication will be needed.
- */
-
-#if BITS_IN_JSAMPLE == 8
-#define MULTIPLY(var,const)  MULTIPLY16C16(var,const)
-#else
-#define MULTIPLY(var,const)  ((var) * (const))
-#endif
-
-
-/* Dequantize a coefficient by multiplying it by the multiplier-table
- * entry; produce an int result.  In this module, both inputs and result
- * are 16 bits or less, so either int or short multiply will work.
- */
-
-#define DEQUANTIZE(coef,quantval)  (((ISLOW_MULT_TYPE) (coef)) * (quantval))
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 4x4 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JCOEFPTR coef_block,
-	       JSAMPARRAY output_buf, JDIMENSION output_col)
-{
-  INT32 tmp0, tmp2, tmp10, tmp12;
-  INT32 z1, z2, z3, z4;
-  JCOEFPTR inptr;
-  ISLOW_MULT_TYPE * quantptr;
-  int * wsptr;
-  JSAMPROW outptr;
-  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
-  int ctr;
-  int workspace[DCTSIZE*4];	/* buffers data between passes */
-  SHIFT_TEMPS
-
-  /* Pass 1: process columns from input, store into work array. */
-
-  inptr = coef_block;
-  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-  wsptr = workspace;
-  for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) {
-    /* Don't bother to process column 4, because second pass won't use it */
-    if (ctr == DCTSIZE-4)
-      continue;
-    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 &&
-	inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*5] == 0 &&
-	inptr[DCTSIZE*6] == 0 && inptr[DCTSIZE*7] == 0) {
-      /* AC terms all zero; we need not examine term 4 for 4x4 output */
-      int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
-      
-      wsptr[DCTSIZE*0] = dcval;
-      wsptr[DCTSIZE*1] = dcval;
-      wsptr[DCTSIZE*2] = dcval;
-      wsptr[DCTSIZE*3] = dcval;
-      
-      continue;
-    }
-    
-    /* Even part */
-    
-    tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-    tmp0 <<= (CONST_BITS+1);
-    
-    z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]);
-    z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]);
-
-    tmp2 = MULTIPLY(z2, FIX_1_847759065) + MULTIPLY(z3, - FIX_0_765366865);
-    
-    tmp10 = tmp0 + tmp2;
-    tmp12 = tmp0 - tmp2;
-    
-    /* Odd part */
-    
-    z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
-    z2 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
-    z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
-    z4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
-    
-    tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */
-	 + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */
-	 + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */
-	 + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */
-    
-    tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */
-	 + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */
-	 + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */
-	 + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */
-
-    /* Final output stage */
-    
-    wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp2, CONST_BITS-PASS1_BITS+1);
-    wsptr[DCTSIZE*3] = (int) DESCALE(tmp10 - tmp2, CONST_BITS-PASS1_BITS+1);
-    wsptr[DCTSIZE*1] = (int) DESCALE(tmp12 + tmp0, CONST_BITS-PASS1_BITS+1);
-    wsptr[DCTSIZE*2] = (int) DESCALE(tmp12 - tmp0, CONST_BITS-PASS1_BITS+1);
-  }
-  
-  /* Pass 2: process 4 rows from work array, store into output array. */
-
-  wsptr = workspace;
-  for (ctr = 0; ctr < 4; ctr++) {
-    outptr = output_buf[ctr] + output_col;
-    /* It's not clear whether a zero row test is worthwhile here ... */
-
-#ifndef NO_ZERO_ROW_TEST
-    if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 &&
-	wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) {
-      /* AC terms all zero */
-      JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
-				  & RANGE_MASK];
-      
-      outptr[0] = dcval;
-      outptr[1] = dcval;
-      outptr[2] = dcval;
-      outptr[3] = dcval;
-      
-      wsptr += DCTSIZE;		/* advance pointer to next row */
-      continue;
-    }
-#endif
-    
-    /* Even part */
-    
-    tmp0 = ((INT32) wsptr[0]) << (CONST_BITS+1);
-    
-    tmp2 = MULTIPLY((INT32) wsptr[2], FIX_1_847759065)
-	 + MULTIPLY((INT32) wsptr[6], - FIX_0_765366865);
-    
-    tmp10 = tmp0 + tmp2;
-    tmp12 = tmp0 - tmp2;
-    
-    /* Odd part */
-    
-    z1 = (INT32) wsptr[7];
-    z2 = (INT32) wsptr[5];
-    z3 = (INT32) wsptr[3];
-    z4 = (INT32) wsptr[1];
-    
-    tmp0 = MULTIPLY(z1, - FIX_0_211164243) /* sqrt(2) * (c3-c1) */
-	 + MULTIPLY(z2, FIX_1_451774981) /* sqrt(2) * (c3+c7) */
-	 + MULTIPLY(z3, - FIX_2_172734803) /* sqrt(2) * (-c1-c5) */
-	 + MULTIPLY(z4, FIX_1_061594337); /* sqrt(2) * (c5+c7) */
-    
-    tmp2 = MULTIPLY(z1, - FIX_0_509795579) /* sqrt(2) * (c7-c5) */
-	 + MULTIPLY(z2, - FIX_0_601344887) /* sqrt(2) * (c5-c1) */
-	 + MULTIPLY(z3, FIX_0_899976223) /* sqrt(2) * (c3-c7) */
-	 + MULTIPLY(z4, FIX_2_562915447); /* sqrt(2) * (c1+c3) */
-
-    /* Final output stage */
-    
-    outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp2,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    outptr[3] = range_limit[(int) DESCALE(tmp10 - tmp2,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    outptr[1] = range_limit[(int) DESCALE(tmp12 + tmp0,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    outptr[2] = range_limit[(int) DESCALE(tmp12 - tmp0,
-					  CONST_BITS+PASS1_BITS+3+1)
-			    & RANGE_MASK];
-    
-    wsptr += DCTSIZE;		/* advance pointer to next row */
-  }
-}
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 2x2 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JCOEFPTR coef_block,
-	       JSAMPARRAY output_buf, JDIMENSION output_col)
-{
-  INT32 tmp0, tmp10, z1;
-  JCOEFPTR inptr;
-  ISLOW_MULT_TYPE * quantptr;
-  int * wsptr;
-  JSAMPROW outptr;
-  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
-  int ctr;
-  int workspace[DCTSIZE*2];	/* buffers data between passes */
-  SHIFT_TEMPS
-
-  /* Pass 1: process columns from input, store into work array. */
-
-  inptr = coef_block;
-  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-  wsptr = workspace;
-  for (ctr = DCTSIZE; ctr > 0; inptr++, quantptr++, wsptr++, ctr--) {
-    /* Don't bother to process columns 2,4,6 */
-    if (ctr == DCTSIZE-2 || ctr == DCTSIZE-4 || ctr == DCTSIZE-6)
-      continue;
-    if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*3] == 0 &&
-	inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*7] == 0) {
-      /* AC terms all zero; we need not examine terms 2,4,6 for 2x2 output */
-      int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS;
-      
-      wsptr[DCTSIZE*0] = dcval;
-      wsptr[DCTSIZE*1] = dcval;
-      
-      continue;
-    }
-    
-    /* Even part */
-    
-    z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]);
-    tmp10 = z1 << (CONST_BITS+2);
-    
-    /* Odd part */
-
-    z1 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]);
-    tmp0 = MULTIPLY(z1, - FIX_0_720959822); /* sqrt(2) * (c7-c5+c3-c1) */
-    z1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]);
-    tmp0 += MULTIPLY(z1, FIX_0_850430095); /* sqrt(2) * (-c1+c3+c5+c7) */
-    z1 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]);
-    tmp0 += MULTIPLY(z1, - FIX_1_272758580); /* sqrt(2) * (-c1+c3-c5-c7) */
-    z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]);
-    tmp0 += MULTIPLY(z1, FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */
-
-    /* Final output stage */
-    
-    wsptr[DCTSIZE*0] = (int) DESCALE(tmp10 + tmp0, CONST_BITS-PASS1_BITS+2);
-    wsptr[DCTSIZE*1] = (int) DESCALE(tmp10 - tmp0, CONST_BITS-PASS1_BITS+2);
-  }
-  
-  /* Pass 2: process 2 rows from work array, store into output array. */
-
-  wsptr = workspace;
-  for (ctr = 0; ctr < 2; ctr++) {
-    outptr = output_buf[ctr] + output_col;
-    /* It's not clear whether a zero row test is worthwhile here ... */
-
-#ifndef NO_ZERO_ROW_TEST
-    if (wsptr[1] == 0 && wsptr[3] == 0 && wsptr[5] == 0 && wsptr[7] == 0) {
-      /* AC terms all zero */
-      JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3)
-				  & RANGE_MASK];
-      
-      outptr[0] = dcval;
-      outptr[1] = dcval;
-      
-      wsptr += DCTSIZE;		/* advance pointer to next row */
-      continue;
-    }
-#endif
-    
-    /* Even part */
-    
-    tmp10 = ((INT32) wsptr[0]) << (CONST_BITS+2);
-    
-    /* Odd part */
-
-    tmp0 = MULTIPLY((INT32) wsptr[7], - FIX_0_720959822) /* sqrt(2) * (c7-c5+c3-c1) */
-	 + MULTIPLY((INT32) wsptr[5], FIX_0_850430095) /* sqrt(2) * (-c1+c3+c5+c7) */
-	 + MULTIPLY((INT32) wsptr[3], - FIX_1_272758580) /* sqrt(2) * (-c1+c3-c5-c7) */
-	 + MULTIPLY((INT32) wsptr[1], FIX_3_624509785); /* sqrt(2) * (c1+c3+c5+c7) */
-
-    /* Final output stage */
-    
-    outptr[0] = range_limit[(int) DESCALE(tmp10 + tmp0,
-					  CONST_BITS+PASS1_BITS+3+2)
-			    & RANGE_MASK];
-    outptr[1] = range_limit[(int) DESCALE(tmp10 - tmp0,
-					  CONST_BITS+PASS1_BITS+3+2)
-			    & RANGE_MASK];
-    
-    wsptr += DCTSIZE;		/* advance pointer to next row */
-  }
-}
-
-
-/*
- * Perform dequantization and inverse DCT on one block of coefficients,
- * producing a reduced-size 1x1 output block.
- */
-
-GLOBAL(void)
-jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr,
-	       JCOEFPTR coef_block,
-	       JSAMPARRAY output_buf, JDIMENSION output_col)
-{
-  int dcval;
-  ISLOW_MULT_TYPE * quantptr;
-  JSAMPLE *range_limit = IDCT_range_limit(cinfo);
-  SHIFT_TEMPS
-
-  /* We hardly need an inverse DCT routine for this: just take the
-   * average pixel value, which is one-eighth of the DC coefficient.
-   */
-  quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table;
-  dcval = DEQUANTIZE(coef_block[0], quantptr[0]);
-  dcval = (int) DESCALE((INT32) dcval, 3);
-
-  output_buf[0][output_col] = range_limit[dcval & RANGE_MASK];
-}
-
-#endif /* IDCT_SCALING_SUPPORTED */

jinclude.h

@@ -2,6 +2,7 @@
  * jinclude.h
  *
  * Copyright (C) 1991-1994, Thomas G. Lane.
+ * Modified 2017 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -83,9 +84,14 @@
  * The modules that use fread() and fwrite() always invoke them through
  * these macros.  On some systems you may need to twiddle the argument casts.
  * CAUTION: argument order is different from underlying functions!
+ *
+ * Furthermore, macros are provided for fflush() and ferror() in order
+ * to facilitate adaption by applications using an own FILE class.
  */
 
 #define JFREAD(file,buf,sizeofbuf)  \
   ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
 #define JFWRITE(file,buf,sizeofbuf)  \
   ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
+#define JFFLUSH(file)	fflush(file)
+#define JFERROR(file)	ferror(file)

jmemansi.c

@@ -0,0 +1,167 @@
+/*
+ * jmemansi.c
+ *
+ * Copyright (C) 1992-1996, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides a simple generic implementation of the system-
+ * dependent portion of the JPEG memory manager.  This implementation
+ * assumes that you have the ANSI-standard library routine tmpfile().
+ * Also, the problem of determining the amount of memory available
+ * is shoved onto the user.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
+#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
+#define SEEK_SET  0		/* if not, assume 0 is correct */
+#endif
+
+
+/*
+ * Memory allocation and freeing are controlled by the regular library
+ * routines malloc() and free().
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: although we include FAR keywords in the routine declarations,
+ * this file won't actually work in 80x86 small/medium model; at least,
+ * you probably won't be able to process useful-size images in only 64KB.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ * It's impossible to do this in a portable way; our current solution is
+ * to make the user tell us (with a default value set at compile time).
+ * If you can actually get the available space, it's a good idea to subtract
+ * a slop factor of 5% or so.
+ */
+
+#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
+#define DEFAULT_MAX_MEM		1000000L /* default: one megabyte */
+#endif
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  return cinfo->mem->max_memory_to_use - already_allocated;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+
+METHODDEF(void)
+read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		    void FAR * buffer_address,
+		    long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFREAD(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		     void FAR * buffer_address,
+		     long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFWRITE(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  fclose(info->temp_file);
+  /* Since this implementation uses tmpfile() to create the file,
+   * no explicit file deletion is needed.
+   */
+}
+
+
+/*
+ * Initial opening of a backing-store object.
+ *
+ * This version uses tmpfile(), which constructs a suitable file name
+ * behind the scenes.  We don't have to use info->temp_name[] at all;
+ * indeed, we can't even find out the actual name of the temp file.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  if ((info->temp_file = tmpfile()) == NULL)
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "");
+  info->read_backing_store = read_backing_store;
+  info->write_backing_store = write_backing_store;
+  info->close_backing_store = close_backing_store;
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}

jmemdos.c

@@ -0,0 +1,638 @@
+/*
+ * jmemdos.c
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides an MS-DOS-compatible implementation of the system-
+ * dependent portion of the JPEG memory manager.  Temporary data can be
+ * stored in extended or expanded memory as well as in regular DOS files.
+ *
+ * If you use this file, you must be sure that NEED_FAR_POINTERS is defined
+ * if you compile in a small-data memory model; it should NOT be defined if
+ * you use a large-data memory model.  This file is not recommended if you
+ * are using a flat-memory-space 386 environment such as DJGCC or Watcom C.
+ * Also, this code will NOT work if struct fields are aligned on greater than
+ * 2-byte boundaries.
+ *
+ * Based on code contributed by Ge' Weijers.
+ */
+
+/*
+ * If you have both extended and expanded memory, you may want to change the
+ * order in which they are tried in jopen_backing_store.  On a 286 machine
+ * expanded memory is usually faster, since extended memory access involves
+ * an expensive protected-mode-and-back switch.  On 386 and better, extended
+ * memory is usually faster.  As distributed, the code tries extended memory
+ * first (what? not everyone has a 386? :-).
+ *
+ * You can disable use of extended/expanded memory entirely by altering these
+ * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0).
+ */
+
+#ifndef XMS_SUPPORTED
+#define XMS_SUPPORTED  1
+#endif
+#ifndef EMS_SUPPORTED
+#define EMS_SUPPORTED  1
+#endif
+
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare these */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+extern char * getenv JPP((const char * name));
+#endif
+
+#ifdef NEED_FAR_POINTERS
+
+#ifdef __TURBOC__
+/* These definitions work for Borland C (Turbo C) */
+#include <alloc.h>		/* need farmalloc(), farfree() */
+#define far_malloc(x)	farmalloc(x)
+#define far_free(x)	farfree(x)
+#else
+/* These definitions work for Microsoft C and compatible compilers */
+#include <malloc.h>		/* need _fmalloc(), _ffree() */
+#define far_malloc(x)	_fmalloc(x)
+#define far_free(x)	_ffree(x)
+#endif
+
+#else /* not NEED_FAR_POINTERS */
+
+#define far_malloc(x)	malloc(x)
+#define far_free(x)	free(x)
+
+#endif /* NEED_FAR_POINTERS */
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#else
+#define READ_BINARY	"rb"
+#endif
+
+#ifndef USE_MSDOS_MEMMGR	/* make sure user got configuration right */
+  You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */
+#endif
+
+#if MAX_ALLOC_CHUNK >= 65535L	/* make sure jconfig.h got this right */
+  MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */
+#endif
+
+
+/*
+ * Declarations for assembly-language support routines (see jmemdosa.asm).
+ *
+ * The functions are declared "far" as are all their pointer arguments;
+ * this ensures the assembly source code will work regardless of the
+ * compiler memory model.  We assume "short" is 16 bits, "long" is 32.
+ */
+
+typedef void far * XMSDRIVER;	/* actually a pointer to code */
+typedef struct {		/* registers for calling XMS driver */
+	unsigned short ax, dx, bx;
+	void far * ds_si;
+      } XMScontext;
+typedef struct {		/* registers for calling EMS driver */
+	unsigned short ax, dx, bx;
+	void far * ds_si;
+      } EMScontext;
+
+extern short far jdos_open JPP((short far * handle, char far * filename));
+extern short far jdos_close JPP((short handle));
+extern short far jdos_seek JPP((short handle, long offset));
+extern short far jdos_read JPP((short handle, void far * buffer,
+				unsigned short count));
+extern short far jdos_write JPP((short handle, void far * buffer,
+				 unsigned short count));
+extern void far jxms_getdriver JPP((XMSDRIVER far *));
+extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *));
+extern short far jems_available JPP((void));
+extern void far jems_calldriver JPP((EMScontext far *));
+
+
+/*
+ * Selection of a file name for a temporary file.
+ * This is highly system-dependent, and you may want to customize it.
+ */
+
+static int next_file_num;	/* to distinguish among several temp files */
+
+LOCAL(void)
+select_file_name (char * fname)
+{
+  const char * env;
+  char * ptr;
+  FILE * tfile;
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    /* Get temp directory name from environment TMP or TEMP variable;
+     * if none, use "."
+     */
+    if ((env = (const char *) getenv("TMP")) == NULL)
+      if ((env = (const char *) getenv("TEMP")) == NULL)
+	env = ".";
+    if (*env == '\0')		/* null string means "." */
+      env = ".";
+    ptr = fname;		/* copy name to fname */
+    while (*env != '\0')
+      *ptr++ = *env++;
+    if (ptr[-1] != '\\' && ptr[-1] != '/')
+      *ptr++ = '\\';		/* append backslash if not in env variable */
+    /* Append a suitable file name */
+    next_file_num++;		/* advance counter */
+    sprintf(ptr, "JPG%03d.TMP", next_file_num);
+    /* Probe to see if file name is already in use */
+    if ((tfile = fopen(fname, READ_BINARY)) == NULL)
+      break;
+    fclose(tfile);		/* oops, it's there; close tfile & try again */
+  }
+}
+
+
+/*
+ * Near-memory allocation and freeing are controlled by the regular library
+ * routines malloc() and free().
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * "Large" objects are allocated in far memory, if possible
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) far_malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  far_free(object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ * It's impossible to do this in a portable way; our current solution is
+ * to make the user tell us (with a default value set at compile time).
+ * If you can actually get the available space, it's a good idea to subtract
+ * a slop factor of 5% or so.
+ */
+
+#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
+#define DEFAULT_MAX_MEM		300000L /* for total usage about 450K */
+#endif
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  return cinfo->mem->max_memory_to_use - already_allocated;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+/*
+ * For MS-DOS we support three types of backing storage:
+ *   1. Conventional DOS files.  We access these by direct DOS calls rather
+ *      than via the stdio package.  This provides a bit better performance,
+ *      but the real reason is that the buffers to be read or written are FAR.
+ *      The stdio library for small-data memory models can't cope with that.
+ *   2. Extended memory, accessed per the XMS V2.0 specification.
+ *   3. Expanded memory, accessed per the LIM/EMS 4.0 specification.
+ * You'll need copies of those specs to make sense of the related code.
+ * The specs are available by Internet FTP from the SIMTEL archives 
+ * (oak.oakland.edu and its various mirror sites).  See files
+ * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip.
+ */
+
+
+/*
+ * Access methods for a DOS file.
+ */
+
+
+METHODDEF(void)
+read_file_store (j_common_ptr cinfo, backing_store_ptr info,
+		 void FAR * buffer_address,
+		 long file_offset, long byte_count)
+{
+  if (jdos_seek(info->handle.file_handle, file_offset))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
+  if (byte_count > 65535L)	/* safety check */
+    ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
+  if (jdos_read(info->handle.file_handle, buffer_address,
+		(unsigned short) byte_count))
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_file_store (j_common_ptr cinfo, backing_store_ptr info,
+		  void FAR * buffer_address,
+		  long file_offset, long byte_count)
+{
+  if (jdos_seek(info->handle.file_handle, file_offset))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */
+  if (byte_count > 65535L)	/* safety check */
+    ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
+  if (jdos_write(info->handle.file_handle, buffer_address,
+		 (unsigned short) byte_count))
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_file_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  jdos_close(info->handle.file_handle);	/* close the file */
+  remove(info->temp_name);	/* delete the file */
+/* If your system doesn't have remove(), try unlink() instead.
+ * remove() is the ANSI-standard name for this function, but
+ * unlink() was more common in pre-ANSI systems.
+ */
+  TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
+}
+
+
+LOCAL(boolean)
+open_file_store (j_common_ptr cinfo, backing_store_ptr info,
+		 long total_bytes_needed)
+{
+  short handle;
+
+  select_file_name(info->temp_name);
+  if (jdos_open((short far *) & handle, (char far *) info->temp_name)) {
+    /* might as well exit since jpeg_open_backing_store will fail anyway */
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+    return FALSE;
+  }
+  info->handle.file_handle = handle;
+  info->read_backing_store = read_file_store;
+  info->write_backing_store = write_file_store;
+  info->close_backing_store = close_file_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
+  return TRUE;			/* succeeded */
+}
+
+
+/*
+ * Access methods for extended memory.
+ */
+
+#if XMS_SUPPORTED
+
+static XMSDRIVER xms_driver;	/* saved address of XMS driver */
+
+typedef union {			/* either long offset or real-mode pointer */
+	long offset;
+	void far * ptr;
+      } XMSPTR;
+
+typedef struct {		/* XMS move specification structure */
+	long length;
+	XMSH src_handle;
+	XMSPTR src;
+	XMSH dst_handle;
+	XMSPTR dst;
+      } XMSspec;
+
+#define ODD(X)	(((X) & 1L) != 0)
+
+
+METHODDEF(void)
+read_xms_store (j_common_ptr cinfo, backing_store_ptr info,
+		void FAR * buffer_address,
+		long file_offset, long byte_count)
+{
+  XMScontext ctx;
+  XMSspec spec;
+  char endbuffer[2];
+
+  /* The XMS driver can't cope with an odd length, so handle the last byte
+   * specially if byte_count is odd.  We don't expect this to be common.
+   */
+
+  spec.length = byte_count & (~ 1L);
+  spec.src_handle = info->handle.xms_handle;
+  spec.src.offset = file_offset;
+  spec.dst_handle = 0;
+  spec.dst.ptr = buffer_address;
+  
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x0b00;		/* EMB move */
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax != 1)
+    ERREXIT(cinfo, JERR_XMS_READ);
+
+  if (ODD(byte_count)) {
+    read_xms_store(cinfo, info, (void FAR *) endbuffer,
+		   file_offset + byte_count - 1L, 2L);
+    ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0];
+  }
+}
+
+
+METHODDEF(void)
+write_xms_store (j_common_ptr cinfo, backing_store_ptr info,
+		 void FAR * buffer_address,
+		 long file_offset, long byte_count)
+{
+  XMScontext ctx;
+  XMSspec spec;
+  char endbuffer[2];
+
+  /* The XMS driver can't cope with an odd length, so handle the last byte
+   * specially if byte_count is odd.  We don't expect this to be common.
+   */
+
+  spec.length = byte_count & (~ 1L);
+  spec.src_handle = 0;
+  spec.src.ptr = buffer_address;
+  spec.dst_handle = info->handle.xms_handle;
+  spec.dst.offset = file_offset;
+
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x0b00;		/* EMB move */
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax != 1)
+    ERREXIT(cinfo, JERR_XMS_WRITE);
+
+  if (ODD(byte_count)) {
+    read_xms_store(cinfo, info, (void FAR *) endbuffer,
+		   file_offset + byte_count - 1L, 2L);
+    endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L];
+    write_xms_store(cinfo, info, (void FAR *) endbuffer,
+		    file_offset + byte_count - 1L, 2L);
+  }
+}
+
+
+METHODDEF(void)
+close_xms_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  XMScontext ctx;
+
+  ctx.dx = info->handle.xms_handle;
+  ctx.ax = 0x0a00;
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle);
+  /* we ignore any error return from the driver */
+}
+
+
+LOCAL(boolean)
+open_xms_store (j_common_ptr cinfo, backing_store_ptr info,
+		long total_bytes_needed)
+{
+  XMScontext ctx;
+
+  /* Get address of XMS driver */
+  jxms_getdriver((XMSDRIVER far *) & xms_driver);
+  if (xms_driver == NULL)
+    return FALSE;		/* no driver to be had */
+
+  /* Get version number, must be >= 2.00 */
+  ctx.ax = 0x0000;
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax < (unsigned short) 0x0200)
+    return FALSE;
+
+  /* Try to get space (expressed in kilobytes) */
+  ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10);
+  ctx.ax = 0x0900;
+  jxms_calldriver(xms_driver, (XMScontext far *) & ctx);
+  if (ctx.ax != 1)
+    return FALSE;
+
+  /* Succeeded, save the handle and away we go */
+  info->handle.xms_handle = ctx.dx;
+  info->read_backing_store = read_xms_store;
+  info->write_backing_store = write_xms_store;
+  info->close_backing_store = close_xms_store;
+  TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx);
+  return TRUE;			/* succeeded */
+}
+
+#endif /* XMS_SUPPORTED */
+
+
+/*
+ * Access methods for expanded memory.
+ */
+
+#if EMS_SUPPORTED
+
+/* The EMS move specification structure requires word and long fields aligned
+ * at odd byte boundaries.  Some compilers will align struct fields at even
+ * byte boundaries.  While it's usually possible to force byte alignment,
+ * that causes an overall performance penalty and may pose problems in merging
+ * JPEG into a larger application.  Instead we accept some rather dirty code
+ * here.  Note this code would fail if the hardware did not allow odd-byte
+ * word & long accesses, but all 80x86 CPUs do.
+ */
+
+typedef void far * EMSPTR;
+
+typedef union {			/* EMS move specification structure */
+	long length;		/* It's easy to access first 4 bytes */
+	char bytes[18];		/* Misaligned fields in here! */
+      } EMSspec;
+
+/* Macros for accessing misaligned fields */
+#define FIELD_AT(spec,offset,type)  (*((type *) &(spec.bytes[offset])))
+#define SRC_TYPE(spec)		FIELD_AT(spec,4,char)
+#define SRC_HANDLE(spec)	FIELD_AT(spec,5,EMSH)
+#define SRC_OFFSET(spec)	FIELD_AT(spec,7,unsigned short)
+#define SRC_PAGE(spec)		FIELD_AT(spec,9,unsigned short)
+#define SRC_PTR(spec)		FIELD_AT(spec,7,EMSPTR)
+#define DST_TYPE(spec)		FIELD_AT(spec,11,char)
+#define DST_HANDLE(spec)	FIELD_AT(spec,12,EMSH)
+#define DST_OFFSET(spec)	FIELD_AT(spec,14,unsigned short)
+#define DST_PAGE(spec)		FIELD_AT(spec,16,unsigned short)
+#define DST_PTR(spec)		FIELD_AT(spec,14,EMSPTR)
+
+#define EMSPAGESIZE	16384L	/* gospel, see the EMS specs */
+
+#define HIBYTE(W)  (((W) >> 8) & 0xFF)
+#define LOBYTE(W)  ((W) & 0xFF)
+
+
+METHODDEF(void)
+read_ems_store (j_common_ptr cinfo, backing_store_ptr info,
+		void FAR * buffer_address,
+		long file_offset, long byte_count)
+{
+  EMScontext ctx;
+  EMSspec spec;
+
+  spec.length = byte_count;
+  SRC_TYPE(spec) = 1;
+  SRC_HANDLE(spec) = info->handle.ems_handle;
+  SRC_PAGE(spec)   = (unsigned short) (file_offset / EMSPAGESIZE);
+  SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
+  DST_TYPE(spec) = 0;
+  DST_HANDLE(spec) = 0;
+  DST_PTR(spec)    = buffer_address;
+  
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x5700;		/* move memory region */
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    ERREXIT(cinfo, JERR_EMS_READ);
+}
+
+
+METHODDEF(void)
+write_ems_store (j_common_ptr cinfo, backing_store_ptr info,
+		 void FAR * buffer_address,
+		 long file_offset, long byte_count)
+{
+  EMScontext ctx;
+  EMSspec spec;
+
+  spec.length = byte_count;
+  SRC_TYPE(spec) = 0;
+  SRC_HANDLE(spec) = 0;
+  SRC_PTR(spec)    = buffer_address;
+  DST_TYPE(spec) = 1;
+  DST_HANDLE(spec) = info->handle.ems_handle;
+  DST_PAGE(spec)   = (unsigned short) (file_offset / EMSPAGESIZE);
+  DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE);
+  
+  ctx.ds_si = (void far *) & spec;
+  ctx.ax = 0x5700;		/* move memory region */
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    ERREXIT(cinfo, JERR_EMS_WRITE);
+}
+
+
+METHODDEF(void)
+close_ems_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  EMScontext ctx;
+
+  ctx.ax = 0x4500;
+  ctx.dx = info->handle.ems_handle;
+  jems_calldriver((EMScontext far *) & ctx);
+  TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle);
+  /* we ignore any error return from the driver */
+}
+
+
+LOCAL(boolean)
+open_ems_store (j_common_ptr cinfo, backing_store_ptr info,
+		long total_bytes_needed)
+{
+  EMScontext ctx;
+
+  /* Is EMS driver there? */
+  if (! jems_available())
+    return FALSE;
+
+  /* Get status, make sure EMS is OK */
+  ctx.ax = 0x4000;
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    return FALSE;
+
+  /* Get version, must be >= 4.0 */
+  ctx.ax = 0x4600;
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40)
+    return FALSE;
+
+  /* Try to allocate requested space */
+  ctx.ax = 0x4300;
+  ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE);
+  jems_calldriver((EMScontext far *) & ctx);
+  if (HIBYTE(ctx.ax) != 0)
+    return FALSE;
+
+  /* Succeeded, save the handle and away we go */
+  info->handle.ems_handle = ctx.dx;
+  info->read_backing_store = read_ems_store;
+  info->write_backing_store = write_ems_store;
+  info->close_backing_store = close_ems_store;
+  TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx);
+  return TRUE;			/* succeeded */
+}
+
+#endif /* EMS_SUPPORTED */
+
+
+/*
+ * Initial opening of a backing-store object.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  /* Try extended memory, then expanded memory, then regular file. */
+#if XMS_SUPPORTED
+  if (open_xms_store(cinfo, info, total_bytes_needed))
+    return;
+#endif
+#if EMS_SUPPORTED
+  if (open_ems_store(cinfo, info, total_bytes_needed))
+    return;
+#endif
+  if (open_file_store(cinfo, info, total_bytes_needed))
+    return;
+  ERREXITS(cinfo, JERR_TFILE_CREATE, "");
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  next_file_num = 0;		/* initialize temp file name generator */
+  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* Microsoft C, at least in v6.00A, will not successfully reclaim freed
+   * blocks of size > 32Kbytes unless we give it a kick in the rear, like so:
+   */
+#ifdef NEED_FHEAPMIN
+  _fheapmin();
+#endif
+}

jmemdosa.asm

@@ -0,0 +1,379 @@
+;
+; jmemdosa.asm
+;
+; Copyright (C) 1992, Thomas G. Lane.
+; This file is part of the Independent JPEG Group's software.
+; For conditions of distribution and use, see the accompanying README file.
+;
+; This file contains low-level interface routines to support the MS-DOS
+; backing store manager (jmemdos.c).  Routines are provided to access disk
+; files through direct DOS calls, and to access XMS and EMS drivers.
+;
+; This file should assemble with Microsoft's MASM or any compatible
+; assembler (including Borland's Turbo Assembler).  If you haven't got
+; a compatible assembler, better fall back to jmemansi.c or jmemname.c.
+;
+; To minimize dependence on the C compiler's register usage conventions,
+; we save and restore all 8086 registers, even though most compilers only
+; require SI,DI,DS to be preserved.  Also, we use only 16-bit-wide return
+; values, which everybody returns in AX.
+;
+; Based on code contributed by Ge' Weijers.
+;
+
+JMEMDOSA_TXT	segment byte public 'CODE'
+
+		assume	cs:JMEMDOSA_TXT
+
+		public	_jdos_open
+		public	_jdos_close
+		public	_jdos_seek
+		public	_jdos_read
+		public	_jdos_write
+		public	_jxms_getdriver
+		public	_jxms_calldriver
+		public	_jems_available
+		public	_jems_calldriver
+
+;
+; short far jdos_open (short far * handle, char far * filename)
+;
+; Create and open a temporary file
+;
+_jdos_open	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	cx,0			; normal file attributes
+		lds	dx,dword ptr [bp+10]	; get filename pointer
+		mov	ah,3ch			; create file
+		int	21h
+		jc	open_err		; if failed, return error code
+		lds	bx,dword ptr [bp+6]	; get handle pointer
+		mov	word ptr [bx],ax	; save the handle
+		xor	ax,ax			; return zero for OK
+open_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_open	endp
+
+
+;
+; short far jdos_close (short handle)
+;
+; Close the file handle
+;
+_jdos_close	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		mov	ah,3eh			; close file
+		int	21h
+		jc	close_err		; if failed, return error code
+		xor	ax,ax			; return zero for OK
+close_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_close	endp
+
+
+;
+; short far jdos_seek (short handle, long offset)
+;
+; Set file position
+;
+_jdos_seek	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		mov	dx,word ptr [bp+8]	; LS offset
+		mov	cx,word ptr [bp+10]	; MS offset
+		mov	ax,4200h		; absolute seek
+		int	21h
+		jc	seek_err		; if failed, return error code
+		xor	ax,ax			; return zero for OK
+seek_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_seek	endp
+
+
+;
+; short far jdos_read (short handle, void far * buffer, unsigned short count)
+;
+; Read from file
+;
+_jdos_read	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		lds	dx,dword ptr [bp+8]	; buffer address
+		mov	cx,word ptr [bp+12]	; number of bytes
+		mov	ah,3fh			; read file
+		int	21h
+		jc	read_err		; if failed, return error code
+		cmp	ax,word ptr [bp+12]	; make sure all bytes were read
+		je	read_ok
+		mov	ax,1			; else return 1 for not OK
+		jmp	short read_err
+read_ok:	xor	ax,ax			; return zero for OK
+read_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_read	endp
+
+
+;
+; short far jdos_write (short handle, void far * buffer, unsigned short count)
+;
+; Write to file
+;
+_jdos_write	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	bx,word ptr [bp+6]	; file handle
+		lds	dx,dword ptr [bp+8]	; buffer address
+		mov	cx,word ptr [bp+12]	; number of bytes
+		mov	ah,40h			; write file
+		int	21h
+		jc	write_err		; if failed, return error code
+		cmp	ax,word ptr [bp+12]	; make sure all bytes written
+		je	write_ok
+		mov	ax,1			; else return 1 for not OK
+		jmp	short write_err
+write_ok:	xor	ax,ax			; return zero for OK
+write_err:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jdos_write	endp
+
+
+;
+; void far jxms_getdriver (XMSDRIVER far *)
+;
+; Get the address of the XMS driver, or NULL if not available
+;
+_jxms_getdriver	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov 	ax,4300h		; call multiplex interrupt with
+		int	2fh			; a magic cookie, hex 4300
+		cmp 	al,80h			; AL should contain hex 80
+		je	xmsavail
+		xor 	dx,dx			; no XMS driver available
+		xor 	ax,ax			; return a nil pointer
+		jmp	short xmsavail_done
+xmsavail:	mov 	ax,4310h		; fetch driver address with
+		int	2fh			; another magic cookie
+		mov 	dx,es			; copy address to dx:ax
+		mov 	ax,bx
+xmsavail_done:	les 	bx,dword ptr [bp+6]	; get pointer to return value
+		mov	word ptr es:[bx],ax
+		mov	word ptr es:[bx+2],dx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop	bp
+		ret
+_jxms_getdriver	endp
+
+
+;
+; void far jxms_calldriver (XMSDRIVER, XMScontext far *)
+;
+; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the XMS call is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jxms_calldriver 	proc	far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
+		mov 	ax,word ptr es:[bx]	; load registers
+		mov 	dx,word ptr es:[bx+2]
+		mov 	si,word ptr es:[bx+6]
+		mov 	ds,word ptr es:[bx+8]
+		mov 	bx,word ptr es:[bx+4]
+		call	dword ptr [bp+6]	; call the driver
+		mov	cx,bx			; save returned BX for a sec
+		les 	bx,dword ptr [bp+10]	; get XMScontext pointer
+		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
+		mov 	word ptr es:[bx+2],dx
+		mov 	word ptr es:[bx+4],cx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jxms_calldriver 	endp
+
+
+;
+; short far jems_available (void)
+;
+; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs)
+;
+_jems_available	proc	far
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		mov	ax,3567h		; get interrupt vector 67h
+		int	21h
+		push	cs
+		pop	ds
+		mov	di,000ah		; check offs 10 in returned seg
+		lea	si,ASCII_device_name	; against literal string
+		mov	cx,8
+		cld
+		repe cmpsb
+		jne	no_ems
+		mov	ax,1			; match, it's there
+		jmp	short avail_done
+no_ems:		xor	ax,ax			; it's not there
+avail_done:	pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		ret
+
+ASCII_device_name	db	"EMMXXXX0"
+
+_jems_available	endp
+
+
+;
+; void far jems_calldriver (EMScontext far *)
+;
+; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers.
+; These are loaded, the EMS trap is performed, and the new values of the
+; AX,DX,BX registers are written back to the context structure.
+;
+_jems_calldriver	proc far
+		push	bp			; linkage
+		mov 	bp,sp
+		push	si			; save all registers for safety
+		push	di
+		push	bx
+		push	cx
+		push	dx
+		push	es
+		push	ds
+		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
+		mov 	ax,word ptr es:[bx]	; load registers
+		mov 	dx,word ptr es:[bx+2]
+		mov 	si,word ptr es:[bx+6]
+		mov 	ds,word ptr es:[bx+8]
+		mov 	bx,word ptr es:[bx+4]
+		int	67h			; call the EMS driver
+		mov	cx,bx			; save returned BX for a sec
+		les 	bx,dword ptr [bp+6]	; get EMScontext pointer
+		mov 	word ptr es:[bx],ax	; put back ax,dx,bx
+		mov 	word ptr es:[bx+2],dx
+		mov 	word ptr es:[bx+4],cx
+		pop	ds			; restore registers and exit
+		pop	es
+		pop	dx
+		pop	cx
+		pop	bx
+		pop	di
+		pop	si
+		pop 	bp
+		ret
+_jems_calldriver	endp
+
+JMEMDOSA_TXT	ends
+
+		end

jmemmac.c

@@ -0,0 +1,289 @@
+/*
+ * jmemmac.c
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * jmemmac.c provides an Apple Macintosh implementation of the system-
+ * dependent portion of the JPEG memory manager.
+ *
+ * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the
+ * JPEG_INTERNALS part of jconfig.h.
+ *
+ * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr
+ * instead of malloc and free.  It accurately determines the amount of
+ * memory available by using CompactMem.  Notice that if left to its
+ * own devices, this code can chew up all available space in the
+ * application's zone, with the exception of the rather small "slop"
+ * factor computed in jpeg_mem_available().  The application can ensure
+ * that more space is left over by reducing max_memory_to_use.
+ *
+ * Large images are swapped to disk using temporary files and System 7.0+'s
+ * temporary folder functionality.
+ *
+ * Note that jmemmac.c depends on two features of MacOS that were first
+ * introduced in System 7: FindFolder and the FSSpec-based calls.
+ * If your application uses jmemmac.c and is run under System 6 or earlier,
+ * and the jpeg library decides it needs a temporary file, it will abort,
+ * printing error messages about requiring System 7.  (If no temporary files
+ * are created, it will run fine.)
+ *
+ * If you want to use jmemmac.c in an application that might be used with
+ * System 6 or earlier, then you should remove dependencies on FindFolder
+ * and the FSSpec calls.  You will need to replace FindFolder with some
+ * other mechanism for finding a place to put temporary files, and you
+ * should replace the FSSpec calls with their HFS equivalents:
+ *
+ *     FSpDelete     ->  HDelete
+ *     FSpGetFInfo   ->  HGetFInfo
+ *     FSpCreate     ->  HCreate
+ *     FSpOpenDF     ->  HOpen      *** Note: not HOpenDF ***
+ *     FSMakeFSSpec  ->  (fill in spec by hand.)
+ *
+ * (Use HOpen instead of HOpenDF.  HOpen is just a glue-interface to PBHOpen,
+ * which is on all HFS macs.  HOpenDF is a System 7 addition which avoids the
+ * ages-old problem of names starting with a period.)
+ *
+ * Contributed by Sam Bushell (jsam@iagu.on.net) and
+ * Dan Gildor (gyld@in-touch.com).
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"    /* import the system-dependent declarations */
+
+#ifndef USE_MAC_MEMMGR	/* make sure user got configuration right */
+  You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */
+#endif
+
+#include <Memory.h>     /* we use the MacOS memory manager */
+#include <Files.h>      /* we use the MacOS File stuff */
+#include <Folders.h>    /* we use the MacOS HFS stuff */
+#include <Script.h>     /* for smSystemScript */
+#include <Gestalt.h>    /* we use Gestalt to test for specific functionality */
+
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "JPG%03d.TMP"
+#endif
+
+static int next_file_num;	/* to distinguish among several temp files */
+
+
+/*
+ * Memory allocation and freeing are controlled by the MacOS library
+ * routines NewPtr() and DisposePtr(), which allocate fixed-address
+ * storage.  Unfortunately, the IJG library isn't smart enough to cope
+ * with relocatable storage.
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) NewPtr(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  DisposePtr((Ptr) object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: we include FAR keywords in the routine declarations simply for
+ * consistency with the rest of the IJG code; FAR should expand to empty
+ * on rational architectures like the Mac.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) NewPtr(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  DisposePtr((Ptr) object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ */
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  long limit = cinfo->mem->max_memory_to_use - already_allocated;
+  long slop, mem;
+
+  /* Don't ask for more than what application has told us we may use */
+  if (max_bytes_needed > limit && limit > 0)
+    max_bytes_needed = limit;
+  /* Find whether there's a big enough free block in the heap.
+   * CompactMem tries to create a contiguous block of the requested size,
+   * and then returns the size of the largest free block (which could be
+   * much more or much less than we asked for).
+   * We add some slop to ensure we don't use up all available memory.
+   */
+  slop = max_bytes_needed / 16 + 32768L;
+  mem = CompactMem(max_bytes_needed + slop) - slop;
+  if (mem < 0)
+    mem = 0;			/* sigh, couldn't even get the slop */
+  /* Don't take more than the application says we can have */
+  if (mem > limit && limit > 0)
+    mem = limit;
+  return mem;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+
+METHODDEF(void)
+read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		    void FAR * buffer_address,
+		    long file_offset, long byte_count)
+{
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+
+  retVal = FSRead ( info->temp_file, &bytes,
+		    (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		     void FAR * buffer_address,
+		     long file_offset, long byte_count)
+{
+  long bytes = byte_count;
+  long retVal;
+
+  if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr )
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+
+  retVal = FSWrite ( info->temp_file, &bytes,
+		     (unsigned char *) buffer_address );
+  if ( retVal != noErr || bytes != byte_count )
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  FSClose ( info->temp_file );
+  FSpDelete ( &(info->tempSpec) );
+}
+
+
+/*
+ * Initial opening of a backing-store object.
+ *
+ * This version uses FindFolder to find the Temporary Items folder,
+ * and puts the temporary file in there.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  short         tmpRef, vRefNum;
+  long          dirID;
+  FInfo         finderInfo;
+  FSSpec        theSpec;
+  Str255        fName;
+  OSErr         osErr;
+  long          gestaltResponse = 0;
+
+  /* Check that FSSpec calls are available. */
+  osErr = Gestalt( gestaltFSAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltHasFSSpecCalls) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  /* Check that FindFolder is available. */
+  osErr = Gestalt( gestaltFindFolderAttr, &gestaltResponse );
+  if ( ( osErr != noErr )
+       || !( gestaltResponse & (1<<gestaltFindFolderPresent) ) )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- System 7.0 or later required.");
+  /* TO DO: add a proper error message to jerror.h. */
+
+  osErr = FindFolder ( kOnSystemDisk, kTemporaryFolderType, kCreateFolder,
+                       &vRefNum, &dirID );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, "- temporary items folder unavailable");
+  /* TO DO: Try putting the temp files somewhere else. */
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    next_file_num++;		/* advance counter */
+
+    sprintf(info->temp_name, TEMP_FILE_NAME, next_file_num);
+    strcpy ( (Ptr)fName+1, info->temp_name );
+    *fName = strlen (info->temp_name);
+    osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec );
+
+    if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr )
+      break;
+  }
+
+  osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) );
+  if ( osErr != noErr )
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+
+  info->tempSpec = theSpec;
+
+  info->read_backing_store = read_backing_store;
+  info->write_backing_store = write_backing_store;
+  info->close_backing_store = close_backing_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  next_file_num = 0;
+
+  /* max_memory_to_use will be initialized to FreeMem()'s result;
+   * the calling application might later reduce it, for example
+   * to leave room to invoke multiple JPEG objects.
+   * Note that FreeMem returns the total number of free bytes;
+   * it may not be possible to allocate a single block of this size.
+   */
+  return FreeMem();
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}

jmemmgr.c

@@ -2,6 +2,7 @@
  * jmemmgr.c
  *
  * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 2011-2012 by Guido Vollbeding.
  * This file is part of the Independent JPEG Group's software.
  * For conditions of distribution and use, see the accompanying README file.
  *
@@ -57,26 +58,23 @@ extern char * getenv JPP((const char * name));
  * requirement, and we had better do so too.
  * There isn't any really portable way to determine the worst-case alignment
  * requirement.  This module assumes that the alignment requirement is
- * multiples of ALIGN_SIZE.
- * By default, we define ALIGN_SIZE as sizeof(double).  This is necessary on some
+ * multiples of sizeof(ALIGN_TYPE).
+ * By default, we define ALIGN_TYPE as double.  This is necessary on some
  * workstations (where doubles really do need 8-byte alignment) and will work
  * fine on nearly everything.  If your machine has lesser alignment needs,
- * you can save a few bytes by making ALIGN_SIZE smaller.
+ * you can save a few bytes by making ALIGN_TYPE smaller.
  * The only place I know of where this will NOT work is certain Macintosh
  * 680x0 compilers that define double as a 10-byte IEEE extended float.
  * Doing 10-byte alignment is counterproductive because longwords won't be
- * aligned well.  Put "#define ALIGN_SIZE 4" in jconfig.h if you have
+ * aligned well.  Put "#define ALIGN_TYPE long" in jconfig.h if you have
  * such a compiler.
  */
 
-#ifndef ALIGN_SIZE		/* so can override from jconfig.h */
-#ifndef WITH_SIMD
-#define ALIGN_SIZE  SIZEOF(double)
-#else
-#define ALIGN_SIZE  16 /* Most SIMD implementations require this */
-#endif
+#ifndef ALIGN_TYPE		/* so can override from jconfig.h */
+#define ALIGN_TYPE  double
 #endif
 
+
 /*
  * We allocate objects from "pools", where each pool is gotten with a single
  * request to jpeg_get_small() or jpeg_get_large().  There is no per-object
@@ -84,24 +82,34 @@ extern char * getenv JPP((const char * name));
  * header with a link to the next pool of the same class.
  * Small and large pool headers are identical except that the latter's
  * link pointer must be FAR on 80x86 machines.
+ * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE
+ * field.  This forces the compiler to make SIZEOF(small_pool_hdr) a multiple
+ * of the alignment requirement of ALIGN_TYPE.
  */
 
-typedef struct small_pool_struct * small_pool_ptr;
+typedef union small_pool_struct * small_pool_ptr;
 
-typedef struct small_pool_struct {
-  small_pool_ptr next;	/* next in list of pools */
-  size_t bytes_used;		/* how many bytes already used within pool */
-  size_t bytes_left;		/* bytes still available in this pool */
+typedef union small_pool_struct {
+  struct {
+    small_pool_ptr next;	/* next in list of pools */
+    size_t bytes_used;		/* how many bytes already used within pool */
+    size_t bytes_left;		/* bytes still available in this pool */
+  } hdr;
+  ALIGN_TYPE dummy;		/* included in union to ensure alignment */
 } small_pool_hdr;
 
-typedef struct large_pool_struct FAR * large_pool_ptr;
+typedef union large_pool_struct FAR * large_pool_ptr;
 
-typedef struct large_pool_struct {
-  large_pool_ptr next;	/* next in list of pools */
-  size_t bytes_used;		/* how many bytes already used within pool */
-  size_t bytes_left;		/* bytes still available in this pool */
+typedef union large_pool_struct {
+  struct {
+    large_pool_ptr next;	/* next in list of pools */
+    size_t bytes_used;		/* how many bytes already used within pool */
+    size_t bytes_left;		/* bytes still available in this pool */
+  } hdr;
+  ALIGN_TYPE dummy;		/* included in union to ensure alignment */
 } large_pool_hdr;
 
+
 /*
  * Here is the full definition of a memory manager object.
  */
@@ -122,7 +130,7 @@ typedef struct {
   jvirt_barray_ptr virt_barray_list;
 
   /* This counts total space obtained from jpeg_get_small/large */
-  size_t total_space_allocated;
+  long total_space_allocated;
 
   /* alloc_sarray and alloc_barray set this value for use by virtual
    * array routines.
@@ -190,23 +198,23 @@ print_mem_stats (j_common_ptr cinfo, int pool_id)
 	  pool_id, mem->total_space_allocated);
 
   for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL;
-       lhdr_ptr = lhdr_ptr->next) {
+       lhdr_ptr = lhdr_ptr->hdr.next) {
     fprintf(stderr, "  Large chunk used %ld\n",
-	    (long) lhdr_ptr->bytes_used);
+	    (long) lhdr_ptr->hdr.bytes_used);
   }
 
   for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL;
-       shdr_ptr = shdr_ptr->next) {
+       shdr_ptr = shdr_ptr->hdr.next) {
     fprintf(stderr, "  Small chunk used %ld free %ld\n",
-	    (long) shdr_ptr->bytes_used,
-	    (long) shdr_ptr->bytes_left);
+	    (long) shdr_ptr->hdr.bytes_used,
+	    (long) shdr_ptr->hdr.bytes_left);
   }
 }
 
 #endif /* MEM_STATS */
 
 
-LOCAL(void)
+LOCAL(noreturn_t)
 out_of_memory (j_common_ptr cinfo, int which)
 /* Report an out-of-memory error and stop execution */
 /* If we compiled MEM_STATS support, report alloc requests before dying */
@@ -229,10 +237,6 @@ out_of_memory (j_common_ptr cinfo, int which)
  * and we also distinguish the first pool of a class from later ones.
  * NOTE: the values given work fairly well on both 16- and 32-bit-int
  * machines, but may be too small if longs are 64 bits or more.
- *
- * Since we do not know what alignment malloc() gives us, we have to
- * allocate ALIGN_SIZE-1 extra space per pool to have room for alignment
- * adjustment.
  */
 
 static const size_t first_pool_slop[JPOOL_NUMPOOLS] = 
@@ -257,36 +261,33 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
   my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
   small_pool_ptr hdr_ptr, prev_hdr_ptr;
   char * data_ptr;
-  size_t min_request, slop;
-
-  /*
-   * Round up the requested size to a multiple of ALIGN_SIZE in order
-   * to assure alignment for the next object allocated in the same pool
-   * and so that algorithms can straddle outside the proper area up
-   * to the next alignment.
-   */
-  sizeofobject = jround_up(sizeofobject, ALIGN_SIZE);
+  size_t odd_bytes, min_request, slop;
 
   /* Check for unsatisfiable request (do now to ensure no overflow below) */
-  if ((SIZEOF(small_pool_hdr) + sizeofobject + ALIGN_SIZE - 1) > MAX_ALLOC_CHUNK)
+  if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr)))
     out_of_memory(cinfo, 1);	/* request exceeds malloc's ability */
 
+  /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
+  odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
+  if (odd_bytes > 0)
+    sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
+
   /* See if space is available in any existing pool */
   if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
     ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
   prev_hdr_ptr = NULL;
   hdr_ptr = mem->small_list[pool_id];
   while (hdr_ptr != NULL) {
-    if (hdr_ptr->bytes_left >= sizeofobject)
+    if (hdr_ptr->hdr.bytes_left >= sizeofobject)
       break;			/* found pool with enough space */
     prev_hdr_ptr = hdr_ptr;
-    hdr_ptr = hdr_ptr->next;
+    hdr_ptr = hdr_ptr->hdr.next;
   }
 
   /* Time to make a new pool? */
   if (hdr_ptr == NULL) {
     /* min_request is what we need now, slop is what will be leftover */
-    min_request = SIZEOF(small_pool_hdr) + sizeofobject + ALIGN_SIZE - 1;
+    min_request = sizeofobject + SIZEOF(small_pool_hdr);
     if (prev_hdr_ptr == NULL)	/* first pool in class? */
       slop = first_pool_slop[pool_id];
     else
@@ -305,23 +306,20 @@ alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
     }
     mem->total_space_allocated += min_request + slop;
     /* Success, initialize the new pool header and add to end of list */
-    hdr_ptr->next = NULL;
-    hdr_ptr->bytes_used = 0;
-    hdr_ptr->bytes_left = sizeofobject + slop;
+    hdr_ptr->hdr.next = NULL;
+    hdr_ptr->hdr.bytes_used = 0;
+    hdr_ptr->hdr.bytes_left = sizeofobject + slop;
     if (prev_hdr_ptr == NULL)	/* first pool in class? */
       mem->small_list[pool_id] = hdr_ptr;
     else
-      prev_hdr_ptr->next = hdr_ptr;
+      prev_hdr_ptr->hdr.next = hdr_ptr;
   }
 
   /* OK, allocate the object from the current pool */
-  data_ptr = (char *) hdr_ptr; /* point to first data byte in pool... */
-  data_ptr += SIZEOF(small_pool_hdr); /* ...by skipping the header... */
-  if ((size_t)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
-    data_ptr += ALIGN_SIZE - (size_t)data_ptr % ALIGN_SIZE;
-  data_ptr += hdr_ptr->bytes_used; /* point to place for object */
-  hdr_ptr->bytes_used += sizeofobject;
-  hdr_ptr->bytes_left -= sizeofobject;
+  data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */
+  data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */
+  hdr_ptr->hdr.bytes_used += sizeofobject;
+  hdr_ptr->hdr.bytes_left -= sizeofobject;
 
   return (void *) data_ptr;
 }
@@ -347,45 +345,37 @@ alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
 {
   my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
   large_pool_ptr hdr_ptr;
-  char FAR * data_ptr;
-
-  /*
-   * Round up the requested size to a multiple of ALIGN_SIZE so that
-   * algorithms can straddle outside the proper area up to the next
-   * alignment.
-   */
-  sizeofobject = jround_up(sizeofobject, ALIGN_SIZE);
+  size_t odd_bytes;
 
   /* Check for unsatisfiable request (do now to ensure no overflow below) */
-  if ((SIZEOF(large_pool_hdr) + sizeofobject + ALIGN_SIZE - 1) > MAX_ALLOC_CHUNK)
+  if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)))
     out_of_memory(cinfo, 3);	/* request exceeds malloc's ability */
 
+  /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */
+  odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE);
+  if (odd_bytes > 0)
+    sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes;
+
   /* Always make a new pool */
   if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS)
     ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id);	/* safety check */
 
   hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject +
-					    SIZEOF(large_pool_hdr) +
-					    ALIGN_SIZE - 1);
+					    SIZEOF(large_pool_hdr));
   if (hdr_ptr == NULL)
     out_of_memory(cinfo, 4);	/* jpeg_get_large failed */
-  mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr) + ALIGN_SIZE - 1;
+  mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr);
 
   /* Success, initialize the new pool header and add to list */
-  hdr_ptr->next = mem->large_list[pool_id];
+  hdr_ptr->hdr.next = mem->large_list[pool_id];
   /* We maintain space counts in each pool header for statistical purposes,
    * even though they are not needed for allocation.
    */
-  hdr_ptr->bytes_used = sizeofobject;
-  hdr_ptr->bytes_left = 0;
+  hdr_ptr->hdr.bytes_used = sizeofobject;
+  hdr_ptr->hdr.bytes_left = 0;
   mem->large_list[pool_id] = hdr_ptr;
 
-  data_ptr = (char *) hdr_ptr; /* point to first data byte in pool... */
-  data_ptr += SIZEOF(small_pool_hdr); /* ...by skipping the header... */
-  if ((size_t)data_ptr % ALIGN_SIZE) /* ...and adjust for alignment */
-    data_ptr += ALIGN_SIZE - (size_t)data_ptr % ALIGN_SIZE;
-
-  return (void FAR *) data_ptr;
+  return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */
 }
 
 
@@ -400,10 +390,6 @@ alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject)
  * this chunking of rows.  The rowsperchunk value is left in the mem manager
  * object so that it can be saved away if this sarray is the workspace for
  * a virtual array.
- *
- * Since we are often upsampling with a factor 2, we align the size (not
- * the start) to 2 * ALIGN_SIZE so that the upsampling routines don't have
- * to be as careful about size.
  */
 
 METHODDEF(JSAMPARRAY)
@@ -417,11 +403,6 @@ alloc_sarray (j_common_ptr cinfo, int pool_id,
   JDIMENSION rowsperchunk, currow, i;
   long ltemp;
 
-  /* Make sure each row is properly aligned */
-  if ((ALIGN_SIZE % SIZEOF(JSAMPLE)) != 0)
-    out_of_memory(cinfo, 5);	/* safety check */
-  samplesperrow = (JDIMENSION)jround_up(samplesperrow, (2 * ALIGN_SIZE) / SIZEOF(JSAMPLE));
-
   /* Calculate max # of rows allowed in one allocation chunk */
   ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
 	  ((long) samplesperrow * SIZEOF(JSAMPLE));
@@ -470,10 +451,6 @@ alloc_barray (j_common_ptr cinfo, int pool_id,
   JDIMENSION rowsperchunk, currow, i;
   long ltemp;
 
-  /* Make sure each row is properly aligned */
-  if ((SIZEOF(JBLOCK) % ALIGN_SIZE) != 0)
-    out_of_memory(cinfo, 6);	/* safety check */
-
   /* Calculate max # of rows allowed in one allocation chunk */
   ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) /
 	  ((long) blocksperrow * SIZEOF(JBLOCK));
@@ -608,8 +585,8 @@ realize_virt_arrays (j_common_ptr cinfo)
 /* Allocate the in-memory buffers for any unrealized virtual arrays */
 {
   my_mem_ptr mem = (my_mem_ptr) cinfo->mem;
-  size_t space_per_minheight, maximum_space, avail_mem;
-  size_t minheights, max_minheights;
+  long space_per_minheight, maximum_space, avail_mem;
+  long minheights, max_minheights;
   jvirt_sarray_ptr sptr;
   jvirt_barray_ptr bptr;
 
@@ -845,7 +822,7 @@ access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr,
       undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
       end_row -= ptr->cur_start_row;
       while (undef_row < end_row) {
-	jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
+	FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
 	undef_row++;
       }
     } else {
@@ -930,7 +907,7 @@ access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr,
       undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */
       end_row -= ptr->cur_start_row;
       while (undef_row < end_row) {
-	jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
+	FMEMZERO((void FAR *) ptr->mem_buffer[undef_row], bytesperrow);
 	undef_row++;
       }
     } else {
@@ -992,9 +969,9 @@ free_pool (j_common_ptr cinfo, int pool_id)
   mem->large_list[pool_id] = NULL;
 
   while (lhdr_ptr != NULL) {
-    large_pool_ptr next_lhdr_ptr = lhdr_ptr->next;
-    space_freed = lhdr_ptr->bytes_used +
-		  lhdr_ptr->bytes_left +
+    large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next;
+    space_freed = lhdr_ptr->hdr.bytes_used +
+		  lhdr_ptr->hdr.bytes_left +
 		  SIZEOF(large_pool_hdr);
     jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed);
     mem->total_space_allocated -= space_freed;
@@ -1006,9 +983,9 @@ free_pool (j_common_ptr cinfo, int pool_id)
   mem->small_list[pool_id] = NULL;
 
   while (shdr_ptr != NULL) {
-    small_pool_ptr next_shdr_ptr = shdr_ptr->next;
-    space_freed = shdr_ptr->bytes_used +
-		  shdr_ptr->bytes_left +
+    small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next;
+    space_freed = shdr_ptr->hdr.bytes_used +
+		  shdr_ptr->hdr.bytes_left +
 		  SIZEOF(small_pool_hdr);
     jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed);
     mem->total_space_allocated -= space_freed;
@@ -1065,16 +1042,16 @@ jinit_memory_mgr (j_common_ptr cinfo)
    * in common if and only if X is a power of 2, ie has only one one-bit.
    * Some compilers may give an "unreachable code" warning here; ignore it.
    */
-  if ((ALIGN_SIZE & (ALIGN_SIZE-1)) != 0)
+  if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0)
     ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE);
   /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be
-   * a multiple of ALIGN_SIZE.
+   * a multiple of SIZEOF(ALIGN_TYPE).
    * Again, an "unreachable code" warning may be ignored here.
    * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK.
    */
   test_mac = (size_t) MAX_ALLOC_CHUNK;
   if ((long) test_mac != MAX_ALLOC_CHUNK ||
-      (MAX_ALLOC_CHUNK % ALIGN_SIZE) != 0)
+      (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0)
     ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK);
 
   max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */

jmemname.c

@@ -0,0 +1,276 @@
+/*
+ * jmemname.c
+ *
+ * Copyright (C) 1992-1997, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides a generic implementation of the system-dependent
+ * portion of the JPEG memory manager.  This implementation assumes that
+ * you must explicitly construct a name for each temp file.
+ * Also, the problem of determining the amount of memory available
+ * is shoved onto the user.
+ */
+
+#define JPEG_INTERNALS
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "jmemsys.h"		/* import the system-dependent declarations */
+
+#ifndef HAVE_STDLIB_H		/* <stdlib.h> should declare malloc(),free() */
+extern void * malloc JPP((size_t size));
+extern void free JPP((void *ptr));
+#endif
+
+#ifndef SEEK_SET		/* pre-ANSI systems may not define this; */
+#define SEEK_SET  0		/* if not, assume 0 is correct */
+#endif
+
+#ifdef DONT_USE_B_MODE		/* define mode parameters for fopen() */
+#define READ_BINARY	"r"
+#define RW_BINARY	"w+"
+#else
+#ifdef VMS			/* VMS is very nonstandard */
+#define READ_BINARY	"rb", "ctx=stm"
+#define RW_BINARY	"w+b", "ctx=stm"
+#else				/* standard ANSI-compliant case */
+#define READ_BINARY	"rb"
+#define RW_BINARY	"w+b"
+#endif
+#endif
+
+
+/*
+ * Selection of a file name for a temporary file.
+ * This is system-dependent!
+ *
+ * The code as given is suitable for most Unix systems, and it is easily
+ * modified for most non-Unix systems.  Some notes:
+ *  1.  The temp file is created in the directory named by TEMP_DIRECTORY.
+ *      The default value is /usr/tmp, which is the conventional place for
+ *      creating large temp files on Unix.  On other systems you'll probably
+ *      want to change the file location.  You can do this by editing the
+ *      #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h.
+ *
+ *  2.  If you need to change the file name as well as its location,
+ *      you can override the TEMP_FILE_NAME macro.  (Note that this is
+ *      actually a printf format string; it must contain %s and %d.)
+ *      Few people should need to do this.
+ *
+ *  3.  mktemp() is used to ensure that multiple processes running
+ *      simultaneously won't select the same file names.  If your system
+ *      doesn't have mktemp(), define NO_MKTEMP to do it the hard way.
+ *      (If you don't have <errno.h>, also define NO_ERRNO_H.)
+ *
+ *  4.  You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c
+ *      will cause the temp files to be removed if you stop the program early.
+ */
+
+#ifndef TEMP_DIRECTORY		/* can override from jconfig.h or Makefile */
+#define TEMP_DIRECTORY  "/usr/tmp/" /* recommended setting for Unix */
+#endif
+
+static int next_file_num;	/* to distinguish among several temp files */
+
+#ifdef NO_MKTEMP
+
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "%sJPG%03d.TMP"
+#endif
+
+#ifndef NO_ERRNO_H
+#include <errno.h>		/* to define ENOENT */
+#endif
+
+/* ANSI C specifies that errno is a macro, but on older systems it's more
+ * likely to be a plain int variable.  And not all versions of errno.h
+ * bother to declare it, so we have to in order to be most portable.  Thus:
+ */
+#ifndef errno
+extern int errno;
+#endif
+
+
+LOCAL(void)
+select_file_name (char * fname)
+{
+  FILE * tfile;
+
+  /* Keep generating file names till we find one that's not in use */
+  for (;;) {
+    next_file_num++;		/* advance counter */
+    sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
+    if ((tfile = fopen(fname, READ_BINARY)) == NULL) {
+      /* fopen could have failed for a reason other than the file not
+       * being there; for example, file there but unreadable.
+       * If <errno.h> isn't available, then we cannot test the cause.
+       */
+#ifdef ENOENT
+      if (errno != ENOENT)
+	continue;
+#endif
+      break;
+    }
+    fclose(tfile);		/* oops, it's there; close tfile & try again */
+  }
+}
+
+#else /* ! NO_MKTEMP */
+
+/* Note that mktemp() requires the initial filename to end in six X's */
+#ifndef TEMP_FILE_NAME		/* can override from jconfig.h or Makefile */
+#define TEMP_FILE_NAME  "%sJPG%dXXXXXX"
+#endif
+
+LOCAL(void)
+select_file_name (char * fname)
+{
+  next_file_num++;		/* advance counter */
+  sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num);
+  mktemp(fname);		/* make sure file name is unique */
+  /* mktemp replaces the trailing XXXXXX with a unique string of characters */
+}
+
+#endif /* NO_MKTEMP */
+
+
+/*
+ * Memory allocation and freeing are controlled by the regular library
+ * routines malloc() and free().
+ */
+
+GLOBAL(void *)
+jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * "Large" objects are treated the same as "small" ones.
+ * NB: although we include FAR keywords in the routine declarations,
+ * this file won't actually work in 80x86 small/medium model; at least,
+ * you probably won't be able to process useful-size images in only 64KB.
+ */
+
+GLOBAL(void FAR *)
+jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject)
+{
+  return (void FAR *) malloc(sizeofobject);
+}
+
+GLOBAL(void)
+jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
+{
+  free(object);
+}
+
+
+/*
+ * This routine computes the total memory space available for allocation.
+ * It's impossible to do this in a portable way; our current solution is
+ * to make the user tell us (with a default value set at compile time).
+ * If you can actually get the available space, it's a good idea to subtract
+ * a slop factor of 5% or so.
+ */
+
+#ifndef DEFAULT_MAX_MEM		/* so can override from makefile */
+#define DEFAULT_MAX_MEM		1000000L /* default: one megabyte */
+#endif
+
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
+{
+  return cinfo->mem->max_memory_to_use - already_allocated;
+}
+
+
+/*
+ * Backing store (temporary file) management.
+ * Backing store objects are only used when the value returned by
+ * jpeg_mem_available is less than the total space needed.  You can dispense
+ * with these routines if you have plenty of virtual memory; see jmemnobs.c.
+ */
+
+
+METHODDEF(void)
+read_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		    void FAR * buffer_address,
+		    long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFREAD(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_READ);
+}
+
+
+METHODDEF(void)
+write_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+		     void FAR * buffer_address,
+		     long file_offset, long byte_count)
+{
+  if (fseek(info->temp_file, file_offset, SEEK_SET))
+    ERREXIT(cinfo, JERR_TFILE_SEEK);
+  if (JFWRITE(info->temp_file, buffer_address, byte_count)
+      != (size_t) byte_count)
+    ERREXIT(cinfo, JERR_TFILE_WRITE);
+}
+
+
+METHODDEF(void)
+close_backing_store (j_common_ptr cinfo, backing_store_ptr info)
+{
+  fclose(info->temp_file);	/* close the file */
+  unlink(info->temp_name);	/* delete the file */
+/* If your system doesn't have unlink(), use remove() instead.
+ * remove() is the ANSI-standard name for this function, but if
+ * your system was ANSI you'd be using jmemansi.c, right?
+ */
+  TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name);
+}
+
+
+/*
+ * Initial opening of a backing-store object.
+ */
+
+GLOBAL(void)
+jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info,
+			 long total_bytes_needed)
+{
+  select_file_name(info->temp_name);
+  if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL)
+    ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name);
+  info->read_backing_store = read_backing_store;
+  info->write_backing_store = write_backing_store;
+  info->close_backing_store = close_backing_store;
+  TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name);
+}
+
+
+/*
+ * These routines take care of any system-dependent initialization and
+ * cleanup required.
+ */
+
+GLOBAL(long)
+jpeg_mem_init (j_common_ptr cinfo)
+{
+  next_file_num = 0;		/* initialize temp file name generator */
+  return DEFAULT_MAX_MEM;	/* default for max_memory_to_use */
+}
+
+GLOBAL(void)
+jpeg_mem_term (j_common_ptr cinfo)
+{
+  /* no work */
+}

jmemnobs.c

@@ -69,9 +69,9 @@ jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject)
  * Here we always say, "we got all you want bud!"
  */
 
-GLOBAL(size_t)
-jpeg_mem_available (j_common_ptr cinfo, size_t min_bytes_needed,
-		    size_t max_bytes_needed, size_t already_allocated)
+GLOBAL(long)
+jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed,
+		    long max_bytes_needed, long already_allocated)
 {
   return max_bytes_needed;
 }

jmemsys.h

@@ -100,10 +100,10 @@ EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object,
  * Conversely, zero may be returned to always use the minimum amount of memory.
  */
 
-EXTERN(size_t) jpeg_mem_available JPP((j_common_ptr cinfo,
-				     size_t min_bytes_needed,
-				     size_t max_bytes_needed,
-				     size_t already_allocated));
+EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo,
+				     long min_bytes_needed,
+				     long max_bytes_needed,
+				     long already_allocated));
 
 
 /*