64-bit support doesn't just exist in 10.6.

git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@216 632fc199-4ca6-4c93-a231-07263d6284db

BUILDING.txt

@@ -7,20 +7,15 @@ Build Requirements
 ==================
 
 -- autoconf 2.56 or later
-   * If using MinGW, this can be obtained by installing the MSYS DTK
-
 -- automake 1.7 or later
-   * If using MinGW, this can be obtained by installing the MSYS DTK
-
 -- libtool 1.4 or later
-   * If using MinGW, this can be obtained by installing the MSYS DTK
+   * If using MinGW, these can be obtained by installing the MSYS DTK
 
 -- NASM
    * 0.98 or later is required for a 32-bit build
    * NASM 2.05 or later is required for a 64-bit build
-   * NASM 2.07 or later is required for a 64-bit build on OS/X (10.6 "Snow
+   * NASM 2.07 or later is required for a 64-bit build on OS/X.  This can be
-     Leopard" or later.)  This can be obtained from MacPorts
+     obtained from MacPorts (http://www.macports.org/).
-     (http://www.macports.org/).
 
    The NASM 2.05 RPMs do not work on older Linux systems, such as Enterprise
    Linux 4.  On such systems, you can easily build and install NASM 2.05
@@ -39,9 +34,9 @@ Build Requirements
 Building libjpeg-turbo
 ======================
 
-The following procedure will build libjpeg-turbo on Linux, 32-bit OS X, and
+The following procedure will build libjpeg-turbo on Linux, FreeBSD, 32-bit
-Solaris/x86 systems (on Solaris, this generates a 32-bit library.  See below
+OS X, and Solaris/x86 systems (on Solaris, this generates a 32-bit library.
-for 64-bit build instructions.)
+See below for 64-bit build instructions.)
 
   cd libjpeg-turbo
   autoreconf -fiv
@@ -116,7 +111,7 @@ Build Recipes
 
 Add
 
-  --host i686-pc-linux-gnu CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32'
+  --host i686-pc-linux-gnu CFLAGS='-O3 -m32' CXXFLAGS='-O3 -m32' LDFLAGS=-m32
 
 to the configure command line.
 
@@ -126,7 +121,7 @@ to the configure command line.
 
 Add
 
-  --host x86_64-apple-darwin10.0.0 NASM=/opt/local/bin/nasm
+  --host x86_64-apple-darwin NASM=/opt/local/bin/nasm
 
 to the configure command line.  NASM 2.07 or later from MacPorts must be
 installed.
@@ -142,9 +137,25 @@ Add
 to the configure command line.
 
 
-32-bit Backward-Compatible Library Build on 64-bit OS/X
+64-bit Backward-Compatible Library Build on 64-bit OS/X
 -------------------------------------------------------
 
+Add
+
+  --host x86_64-apple-darwin NASM=/opt/local/bin/nasm \
+  CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4 -O3' \
+    CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4 -O3' \
+    LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
+    -mmacosx-version-min=10.4'
+
+to the configure command line.  The OS X 10.4 SDK must be installed.
+
+
+32-bit Backward-Compatible Library Build on OS/X
+------------------------------------------------
+
 Add
 
   CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk \
@@ -167,17 +178,6 @@ Add
 to the configure command line.
 
 
-64-bit Library Build on 64-bit FreeBSD
---------------------------------------
-
-Add
-
-  --host x86_64-unknown-freebsd
-
-to the configure command line.  NASM 2.07 or later from FreeBSD ports must be
-installed.
-
-
 32-bit Library Build on 64-bit FreeBSD
 --------------------------------------
 
@@ -257,7 +257,8 @@ Build Requirements
      to the system or user LIB environment variable prior to building
      libjpeg-turbo.
 
--- NASM (http://www.nasm.us/) 0.98 or later
+-- NASM (http://www.nasm.us/) 0.98 or later (NASM 2.05 or later is required for
+   a 64-bit build)
 
 ======================
 Building libjpeg-turbo
@@ -307,11 +308,11 @@ make dmg
 
 make udmg
 
-  On 64-bit OS X (10.6 "Snow Leopard" or later), this creates a version of the
+  On 64-bit OS X systems, this creates a version of the Macintosh package and
-  Macintosh package/disk image which contains universal i386/x86-64 binaries.
+  disk image which contains universal i386/x86-64 binaries.  The 32-bit fork of
-  The 32-bit fork of these binaries is backward compatible with OS X 10.4 and
+  these binaries is backward compatible with OS X 10.4 and later.  The 64-bit
-  later, whereas the 64-bit fork is compatible with OS X 10.6 and later.  OS X
+  fork can be made backward compatible as well by using the instructions in
-  10.4 compatibility SDK required.
+  the "Build Recipes" section.  OS X 10.4 compatibility SDK required.
 
 make nsi
 

ChangeLog.txt

@@ -1,9 +1,34 @@
+Significant changes since 0.0.93
+================================
+
+[1] 2983700: Further FreeBSD build tweaks (no longer necessary to specify
+--host when configuring on a 64-bit system)
+
+[2] Created sym. links in the Unix/Linux packages so that the TurboJPEG
+include file can always be found in /opt/libjpeg-turbo/include, the 32-bit
+static libraries can always be found in /opt/libjpeg-turbo/lib32, and the
+64-bit static libraries can always be found in /opt/libjpeg-turbo/lib64.
+
+[3] The Unix/Linux distribution packages now include the libjpeg run-time
+programs (cjpeg, etc.) and man pages.
+
+[4] Created a 32-bit supplementary package for amd64 Debian systems which
+contains just the 32-bit libjpeg-turbo libraries.
+
+[5] Moved the libraries from */lib32 to */lib in the i386 Debian package.
+
+[6] Include distribution package for Cygwin
+
+[7] No longer necessary to specify --without-simd on non-x86 architectures, and
+unit tests now work on those architectures.
+
+
 Significant changes since 0.0.91
 ================================
 
-[1] Fixed x86-64 build on FreeBSD systems
+[1] 2982659, Fixed x86-64 build on FreeBSD systems
 
-[2] Added support for Windows 64-bit systems
+[2] 2988188: Added support for Windows 64-bit systems
 
 
 Significant changes since 0.0.90

Makefile.am

@@ -39,7 +39,8 @@ endif
 
 TSTHDRS = rrutil.h rrtimer.h
 
-noinst_PROGRAMS = jpgtest jpegut cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+bin_PROGRAMS = cjpeg djpeg jpegtran rdjpgcom wrjpgcom
+noinst_PROGRAMS = jpgtest jpegut
 
 jpgtest_SOURCES = $(TSTHDRS) jpgtest.cxx bmp.h bmp.c
 
@@ -78,7 +79,7 @@ wrjpgcom_SOURCES = wrjpgcom.c
 wrjpgcom_LDADD = libjpeg.la
 
 
-DISTMANS= cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
+dist_man1_MANS = cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 wrjpgcom.1
 
 DOCS= README install.doc usage.doc wizard.doc example.c libjpeg.doc \
 	structure.doc coderules.doc filelist.doc jconfig.doc change.log \
@@ -86,14 +87,19 @@ DOCS= README install.doc usage.doc wizard.doc example.c libjpeg.doc \
 	ChangeLog.txt
 
 TESTFILES= testorig.jpg testorig.ppm testimg.bmp testimgflt.jpg \
-	testimgfst.jpg testimgint.jpg testimgp.jpg testimgfst.ppm testimgint.ppm
+	testimgfst.jpg testimgint.jpg testimgp.jpg testimgfst.ppm testimgint.ppm \
+	testimg-nosimd.bmp testimgfst-nosimd.ppm testorig-nosimd.ppm \
+	testimgflt-nosimd.jpg testimgint-nosimd.jpg testimgfst-nosimd.jpg \
+	testimgp-nosimd.jpg
 
-EXTRA_DIST = win release $(DOCS) $(DISTMANS) $(TESTFILES)
+EXTRA_DIST = win release $(DOCS) $(TESTFILES)
 
 dist-hook:
 	rm -rf `find $(distdir) -name .svn`
 
 
+if WITH_SIMD
+
 test: testclean cjpeg djpeg jpegtran jpegut
 	./jpegut
 	./cjpeg -dct int -outfile testoutint.jpg $(srcdir)/testorig.ppm
@@ -115,20 +121,45 @@ test: testclean cjpeg djpeg jpegtran jpegut
 	./jpegtran -outfile testoutt.jpg testoutp.jpg
 	cmp $(srcdir)/testimgint.jpg testoutt.jpg
 
+else
+
+test: testclean cjpeg djpeg jpegtran jpegut
+	./jpegut
+	./cjpeg -dct int -outfile testoutint.jpg $(srcdir)/testorig-nosimd.ppm
+	./cjpeg -dct fast -opt -outfile testoutfst.jpg $(srcdir)/testorig-nosimd.ppm
+	./cjpeg -dct float -outfile testoutflt.jpg $(srcdir)/testorig-nosimd.ppm
+	cmp $(srcdir)/testimgint-nosimd.jpg testoutint.jpg
+	cmp $(srcdir)/testimgfst-nosimd.jpg testoutfst.jpg
+	cmp $(srcdir)/testimgflt-nosimd.jpg testoutflt.jpg
+	./djpeg -dct int -fast -ppm -outfile testoutint.ppm $(srcdir)/testorig.jpg
+	./djpeg -dct fast -ppm -outfile testoutfst.ppm $(srcdir)/testorig.jpg
+	./djpeg -dct float -ppm -outfile testoutflt.ppm $(srcdir)/testorig.jpg
+	cmp $(srcdir)/testimgint.ppm testoutint.ppm
+	cmp $(srcdir)/testimgfst-nosimd.ppm testoutfst.ppm
+	cmp $(srcdir)/testorig-nosimd.ppm testoutflt.ppm
+	./djpeg -dct int -bmp -colors 256 -outfile testout.bmp  $(srcdir)/testorig.jpg
+	cmp $(srcdir)/testimg-nosimd.bmp testout.bmp
+	./cjpeg -dct int -progressive -outfile testoutp.jpg $(srcdir)/testorig-nosimd.ppm
+	cmp $(srcdir)/testimgp-nosimd.jpg testoutp.jpg
+	./jpegtran -outfile testoutt.jpg testoutp.jpg
+	cmp $(srcdir)/testimgint-nosimd.jpg testoutt.jpg
+
+endif
+
 testclean:
-	$(RM) testout*
+	rm -f testout*
-	$(RM) *_GRAYQ[0-9]*.bmp
+	rm -f *_GRAYQ[0-9]*.bmp
-	$(RM) *_GRAYQ[0-9]*.ppm
+	rm -f *_GRAYQ[0-9]*.ppm
-	$(RM) *_GRAYQ[0-9]*.jpg
+	rm -f *_GRAYQ[0-9]*.jpg
-	$(RM) *_420Q[0-9]*.bmp
+	rm -f *_420Q[0-9]*.bmp
-	$(RM) *_420Q[0-9]*.ppm
+	rm -f *_420Q[0-9]*.ppm
-	$(RM) *_420Q[0-9]*.jpg
+	rm -f *_420Q[0-9]*.jpg
-	$(RM) *_422Q[0-9]*.bmp
+	rm -f *_422Q[0-9]*.bmp
-	$(RM) *_422Q[0-9]*.ppm
+	rm -f *_422Q[0-9]*.ppm
-	$(RM) *_422Q[0-9]*.jpg
+	rm -f *_422Q[0-9]*.jpg
-	$(RM) *_444Q[0-9]*.bmp
+	rm -f *_444Q[0-9]*.bmp
-	$(RM) *_444Q[0-9]*.ppm
+	rm -f *_444Q[0-9]*.ppm
-	$(RM) *_444Q[0-9]*.jpg
+	rm -f *_444Q[0-9]*.jpg
 
 rpm: all
 	sh $(srcdir)/release/makerpm ${PACKAGE_NAME} ${VERSION} ${BUILD} \
@@ -175,3 +206,6 @@ nsi: all
 		-DPLATFORM="GCC" -DGCC $(srcdir)/release/libjpeg-turbo.nsi
 
 endif
+
+cygwinpkg: all
+	sh $(srcdir)/release/makecygwinpkg ${PACKAGE_NAME} ${VERSION} ${srcdir}

README-turbo.txt

@@ -62,7 +62,7 @@ For instance:
   user  0m0.029s
   sys   0m0.010s
 
-NOTE: {lib} can be lib, lib32, lib64, or lib/amd64, depending on the O/S and
+NOTE: {lib} can be lib, lib32, lib64, or lib/64, depending on the O/S and
 architecture.
 
 System administrators can also replace the libjpeg sym links in /usr/{lib} with
@@ -106,20 +106,20 @@ Replacing TurboJPEG/IPP
 =======================
 
 libjpeg-turbo is a drop-in replacement for the TurboJPEG/IPP SDK used by
-VirtualGL 2.1.x (and prior) and TurboVNC.  libjpeg-turbo contains a wrapper
+VirtualGL 2.1.x and TurboVNC 0.6 (and prior.)  libjpeg-turbo contains a wrapper
 library (TurboJPEG/OSS) that emulates the TurboJPEG API using libjpeg-turbo
 instead of the closed source Intel Performance Primitives.  You can replace the
 TurboJPEG/IPP package on Linux systems with the libjpeg-turbo package in order
 to make existing releases of VirtualGL 2.1.x and TurboVNC use the new codec at
 run time.  Note that the 64-bit libjpeg-turbo packages contain only 64-bit
-binaries, whereas the TurboJPEG/IPP 64-bit packages contain both 64-bit and
+binaries, whereas the TurboJPEG/IPP 64-bit packages contained both 64-bit and
 32-bit binaries.  Thus, to replace a TurboJPEG/IPP 64-bit package, install
 both the 64-bit and 32-bit versions of libjpeg-turbo.
 
-You can also build the VirtualGL 2.1.x and TurboVNC source code with
+You can also build the VirtualGL 2.1.x and TurboVNC 0.6 source code with
 the libjpeg-turbo SDK instead of TurboJPEG/IPP.  It should work identically.
 libjpeg-turbo also includes static library versions of TurboJPEG/OSS, which
-are used to build VirtualGL 2.2 and later.
+are used to build TurboVNC 1.0 and later.
 
 ========================================
 Using libjpeg-turbo in Your Own Programs
@@ -134,7 +134,8 @@ of libjpeg by setting
   and
   LIBRARY_PATH=/opt/libjpeg-turbo/{lib}
 
-({lib} = lib, lib32, lib64, or lib/amd64, as appropriate.)
+({lib} = lib32 or lib64, depending on whether you are building a 32-bit or a
+64-bit application.)
 
 If using Cygwin, then set
 
@@ -162,7 +163,7 @@ version of libjpeg-turbo, you can use the following linker options:
 
   -Wl,-Bstatic -ljpeg -Wl,-Bdynamic
 
-On OS X, simply add /opt/libjpeg-turbo/{lib}/libjpeg.a to the linker command
+On OS X, simply add /opt/libjpeg-turbo/lib/libjpeg.a to the linker command
 line (this also works on Linux and Solaris.)
 
 To build Visual C++ applications using libjpeg-turbo, add

acinclude.m4

@@ -45,7 +45,7 @@ case "$host_os" in
       objfmt='BSD-a.out'
     else
       case "$host_cpu" in
-        x86_64)
+        x86_64 | amd64)
           objfmt='ELF64'
           ;;
         *)

configure.ac

@@ -2,7 +2,7 @@
 # Process this file with autoconf to produce a configure script.
 
 AC_PREREQ([2.56])
-AC_INIT([libjpeg-turbo], [0.0.93])
+AC_INIT([libjpeg-turbo], [1.0.0])
 BUILD=`date +%Y%m%d`
 
 AM_INIT_AUTOMAKE([-Wall foreign dist-bzip2])
@@ -133,7 +133,7 @@ if test "x${with_simd}" != "xno"; then
   # Check if we're on a supported CPU
   AC_MSG_CHECKING([if we have SIMD optimisations for cpu type])
   case "$host_cpu" in
-    x86_64)
+    x86_64 | amd64)
       AC_MSG_RESULT([yes (x86_64)])
       AC_PROG_NASM
       simd_arch=x86_64
@@ -145,7 +145,8 @@ if test "x${with_simd}" != "xno"; then
     ;;
     *)
       AC_MSG_RESULT([no ("$host_cpu")])
-      AC_MSG_ERROR([CPU is not supported])
+      AC_MSG_WARN([SIMD support not available for this CPU.  Performance will suffer.])
+      with_simd=no;
     ;;
   esac
 
@@ -157,7 +158,7 @@ fi
 AM_CONDITIONAL([WITH_SIMD], [test "x$with_simd" != "xno"])
 AM_CONDITIONAL([SIMD_I386], [test "x$simd_arch" = "xi386"])
 AM_CONDITIONAL([SIMD_X86_64], [test "x$simd_arch" = "xx86_64"])
-AM_CONDITIONAL([X86_64], [test "x$host_cpu" = "xx86_64"])
+AM_CONDITIONAL([X86_64], [test "x$host_cpu" = "xx86_64" -o "x$host_cpu" = "xamd64"])
 
 case "$host_cpu" in
   x86_64)
@@ -173,6 +174,7 @@ esac
 AC_SUBST(RPMARCH)
 AC_SUBST(DEBARCH)
 AC_SUBST(BUILD)
+AC_SUBST(RM)
 
 # jconfig.h is the file we use, but we have another before that to
 # fool autoheader. the reason is that we include this header in our

release/libjpeg-turbo.spec

@@ -39,13 +39,13 @@ TurboJPEG/IPP.  It is faster in some areas but slower in others.
 #-->%setup -q
 
 #-->%build
-#-->configure prefix=$RPM_BUILD_ROOT/opt/%{name} libdir=$RPM_BUILD_ROOT/opt/%{name}/%{__lib} --with-pic
+#-->configure libdir=/opt/%{name}/%{__lib} mandir=/opt/%{name}/man --with-pic
-#-->make prefix=$RPM_BUILD_ROOT/opt/%{name} libdir=$RPM_BUILD_ROOT/opt/%{name}/%{__lib}
+#-->make DESTDIR=$RPM_BUILD_ROOT libdir=/opt/%{name}/%{__lib} mandir=/opt/%{name}/man
 
 %install
 
 rm -rf $RPM_BUILD_ROOT
-make install prefix=$RPM_BUILD_ROOT/opt/%{name} libdir=$RPM_BUILD_ROOT/opt/%{name}/%{__lib}
+make install DESTDIR=$RPM_BUILD_ROOT libdir=/opt/%{name}/%{__lib} mandir=/opt/%{name}/man
 rm -f $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/*.la
 mkdir -p $RPM_BUILD_ROOT/usr/%{__lib}
 mv $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/libturbojpeg.* $RPM_BUILD_ROOT/usr/%{__lib}
@@ -53,6 +53,12 @@ mv $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/libturbojpeg.* $RPM_BUILD_ROOT/usr/%{__l
 /sbin/ldconfig -n $RPM_BUILD_ROOT/usr/%{__lib}
 mkdir -p $RPM_BUILD_ROOT/usr/include
 mv $RPM_BUILD_ROOT/opt/%{name}/include/turbojpeg.h $RPM_BUILD_ROOT/usr/include
+ln -fs /usr/include/turbojpeg.h $RPM_BUILD_ROOT/opt/%{name}/include/
+ln -fs /usr/%{__lib}/libturbojpeg.a $RPM_BUILD_ROOT/opt/%{name}/%{__lib}/
+%ifarch x86_64
+%else
+ln -fs %{__lib} $RPM_BUILD_ROOT/opt/%{name}/lib32
+%endif
 
 %post -p /sbin/ldconfig
 
@@ -63,13 +69,24 @@ rm -rf $RPM_BUILD_ROOT
 
 %files
 %defattr(-,root,root)
-%doc %{_srcdir}/README-turbo.txt %{_srcdir}/README %{_srcdir}/libjpeg.doc %{_srcdir}/LICENSE.txt %{_srcdir}/LGPL.txt
+%doc %{_srcdir}/README-turbo.txt %{_srcdir}/README %{_srcdir}/libjpeg.doc %{_srcdir}/usage.doc %{_srcdir}/LICENSE.txt %{_srcdir}/LGPL.txt
 %dir /opt/%{name}
+%dir /opt/%{name}/bin
+/opt/%{name}/bin/cjpeg
+/opt/%{name}/bin/djpeg
+/opt/%{name}/bin/jpegtran
+/opt/%{name}/bin/rdjpgcom
+/opt/%{name}/bin/wrjpgcom
 %dir /opt/%{name}/%{__lib}
+%ifarch x86_64
+%else
+/opt/%{name}/lib32
+%endif
 /opt/%{name}/%{__lib}/libjpeg.so.62.0.0
 /opt/%{name}/%{__lib}/libjpeg.so.62
 /opt/%{name}/%{__lib}/libjpeg.so
 /opt/%{name}/%{__lib}/libjpeg.a
+/opt/%{name}/%{__lib}/libturbojpeg.a
 /usr/%{__lib}/libturbojpeg.so
 /usr/%{__lib}/libturbojpeg.a
 /usr/include/turbojpeg.h
@@ -78,5 +95,13 @@ rm -rf $RPM_BUILD_ROOT
 /opt/%{name}/include/jerror.h
 /opt/%{name}/include/jmorecfg.h
 /opt/%{name}/include/jpeglib.h
+/opt/%{name}/include/turbojpeg.h
+%dir /opt/%{name}/man
+%dir /opt/%{name}/man/man1
+/opt/%{name}/man/man1/cjpeg.1*
+/opt/%{name}/man/man1/djpeg.1*
+/opt/%{name}/man/man1/jpegtran.1*
+/opt/%{name}/man/man1/rdjpgcom.1*
+/opt/%{name}/man/man1/wrjpgcom.1*
 
 %changelog

release/makecygwinpkg

@@ -0,0 +1,49 @@
+#!/bin/sh
+
+set -u
+set -e
+trap onexit INT
+trap onexit TERM
+trap onexit EXIT
+
+TMPDIR=
+
+onexit()
+{
+	if [ ! "$TMPDIR" = "" ]; then
+		rm -rf $TMPDIR
+	fi
+}
+
+usage()
+{
+	echo "$0 <package name> <version> <source dir.>"
+	exit 1
+}
+
+if [ $# -lt 3 ]; then usage $0; fi
+PACKAGE_NAME=$1
+VERSION=$2
+SRCDIR=$3
+
+umask 022
+rm -f $PACKAGE_NAME-$VERSION-cygwin.tar.bz2
+TMPDIR=`mktemp -d /tmp/ljtbuild.XXXXXX`
+__PWD=`pwd`
+make install DESTDIR=$TMPDIR/pkg mandir=/opt/$PACKAGE_NAME/man
+rm $TMPDIR/pkg/opt/$PACKAGE_NAME/lib/*.la
+DOCDIR=$TMPDIR/pkg/usr/share/doc/$PACKAGE_NAME-$VERSION
+mkdir -p $DOCDIR
+install -m 644 $SRCDIR/README-turbo.txt $DOCDIR
+install -m 644 $SRCDIR/README $DOCDIR
+install -m 644 $SRCDIR/libjpeg.doc $DOCDIR
+install -m 644 $SRCDIR/usage.doc $DOCDIR
+install -m 644 $SRCDIR/LICENSE.txt $DOCDIR
+install -m 644 $SRCDIR/LGPL.txt $DOCDIR
+ln -fs lib $TMPDIR/pkg/opt/$PACKAGE_NAME/lib32
+cd $TMPDIR/pkg
+tar cfj ../$PACKAGE_NAME-$VERSION-cygwin.tar.bz2 *
+cd $__PWD
+mv $TMPDIR/*.tar.bz2 .
+
+exit 0

release/makedpkg

@@ -21,12 +21,18 @@ usage()
 	exit 1
 }
 
-if [ $# -lt 5 ]; then usage $0; fi
+makedeb()
-PACKAGE_NAME=$1
+{
-VERSION=$2
+	SUPPLEMENT=$1
-BUILD=$3
+	DIRNAME=$PACKAGE_NAME
-DEBARCH=$4
+
-SRCDIR=$5
+	if [ $SUPPLEMENT = 1 ]; then
+		PACKAGE_NAME=$PACKAGE_NAME\32
+		DEBARCH=amd64
+		__LIB=lib32
+	else
+		__LIB=lib
+	fi
 
 	umask 022
 	rm -f $PACKAGE_NAME\_$DEBARCH.deb
@@ -36,27 +42,53 @@ mkdir $TMPDIR/DEBIAN
 		| sed s/{__VERSION}/$VERSION/g | sed s/{__BUILD}/$BUILD/g \
 		| sed s/{__ARCH}/$DEBARCH/g > $TMPDIR/DEBIAN/control)
 
-if [ "$DEBARCH" = "amd64" ]; then
+	make install prefix=$TMPDIR/opt/$DIRNAME libdir=$TMPDIR/opt/$DIRNAME/$__LIB mandir=$TMPDIR/opt/$DIRNAME/man
-	__LIB=lib
+	rm -f $TMPDIR/opt/$DIRNAME/$__LIB/*.la
-else
+
-	__LIB=lib32
+	if [ $SUPPLEMENT = 1 ]; then
+		rm -rf $TMPDIR/opt/$DIRNAME/include
+		rm -rf $TMPDIR/opt/$DIRNAME/man
+		rm -rf $TMPDIR/opt/$DIRNAME/bin
 	fi
-make install prefix=$TMPDIR/opt/$PACKAGE_NAME libdir=$TMPDIR/opt/$PACKAGE_NAME/$__LIB
+
-rm -f $TMPDIR/opt/$PACKAGE_NAME/$__LIB/*.la
 	mkdir -p $TMPDIR/usr/$__LIB
-mv $TMPDIR/opt/$PACKAGE_NAME/$__LIB/libturbojpeg.* $TMPDIR/usr/$__LIB
+	mv $TMPDIR/opt/$DIRNAME/$__LIB/libturbojpeg.* $TMPDIR/usr/$__LIB
-/sbin/ldconfig -n $TMPDIR/opt/$PACKAGE_NAME/$__LIB
+	ln -fs /usr/$__LIB/libturbojpeg.a $TMPDIR/opt/$DIRNAME/$__LIB/
+	/sbin/ldconfig -n $TMPDIR/opt/$DIRNAME/$__LIB
 	/sbin/ldconfig -n $TMPDIR/usr/$__LIB
+
+	if [ ! $SUPPLEMENT = 1 ]; then
+		if [ "$DEBARCH" = "amd64" ]; then
+			ln -fs lib $TMPDIR/opt/$DIRNAME/lib64
+		else
+			if [ ! "$__LIB" = "lib32" ]; then
+				ln -fs lib $TMPDIR/opt/$DIRNAME/lib32
+			fi
+		fi
 		mkdir -p $TMPDIR/usr/include
-mv $TMPDIR/opt/$PACKAGE_NAME/include/turbojpeg.h $TMPDIR/usr/include
+		mv $TMPDIR/opt/$DIRNAME/include/turbojpeg.h $TMPDIR/usr/include
-mkdir -p $TMPDIR/usr/share/doc/$PACKAGE_NAME-$VERSION
+		ln -fs /usr/include/turbojpeg.h $TMPDIR/opt/$DIRNAME/include/
-install -m 644 $SRCDIR/LICENSE.txt $TMPDIR/usr/share/doc/$PACKAGE_NAME-$VERSION
+		mkdir -p $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
-install -m 644 $SRCDIR/LGPL.txt $TMPDIR/usr/share/doc/$PACKAGE_NAME-$VERSION
+		install -m 644 $SRCDIR/LICENSE.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
-install -m 644 $SRCDIR/README-turbo.txt $TMPDIR/usr/share/doc/$PACKAGE_NAME-$VERSION
+		install -m 644 $SRCDIR/LGPL.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
-install -m 644 $SRCDIR/README $TMPDIR/usr/share/doc/$PACKAGE_NAME-$VERSION
+		install -m 644 $SRCDIR/README-turbo.txt $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
-install -m 644 $SRCDIR/libjpeg.doc $TMPDIR/usr/share/doc/$PACKAGE_NAME-$VERSION
+		install -m 644 $SRCDIR/README $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/libjpeg.doc $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+		install -m 644 $SRCDIR/usage.doc $TMPDIR/usr/share/doc/$DIRNAME-$VERSION
+	fi
 
 	sudo chown -Rh root:root $TMPDIR/*
 	dpkg -b $TMPDIR $PACKAGE_NAME\_$DEBARCH.deb
+}
+
+if [ $# -lt 5 ]; then usage $0; fi
+PACKAGE_NAME=$1
+VERSION=$2
+BUILD=$3
+DEBARCH=$4
+SRCDIR=$5
+
+makedeb 0
+if [ "$DEBARCH" = "i386" ]; then makedeb 1; fi
 
 exit

release/makemacpkg

@@ -42,7 +42,7 @@ TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
 PKGROOT=$TMPDIR/pkg/Package_Root
 mkdir -p $PKGROOT
 mkdir -p $PKGROOT/opt/$PACKAGE_NAME/bin
-make install prefix=$PKGROOT/opt/$PACKAGE_NAME
+make install DESTDIR=$PKGROOT mandir=/opt/$PACKAGE_NAME/man
 rm -f $PKGROOT/opt/$PACKAGE_NAME/lib/*.la
 mkdir -p $PKGROOT/usr/lib
 mv $PKGROOT/opt/$PACKAGE_NAME/lib/libturbojpeg.* $PKGROOT/usr/lib
@@ -59,33 +59,64 @@ if [ $UNIVERSAL = 1 ]; then
 		CFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4 -O3 -m32' \
 		CXXFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4 -O3 -m32' \
 		LDFLAGS='-isysroot /Developer/SDKs/MacOSX10.4u.sdk -mmacosx-version-min=10.4 -m32'
-	make prefix=$TMPDIR/dist.x86 install
+	make install DESTDIR=$TMPDIR/dist.x86
 	popd
-	if [ ! -h $TMPDIR/dist.x86/lib/libjpeg.62.dylib -a \
+	if [ ! -h $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib -a \
 		! -h $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib ]; then
-		lipo -create -arch i386 $TMPDIR/dist.x86/lib/libjpeg.62.dylib -arch x86_64 \
+		lipo -create \
-			$PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib \
+			-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib \
+			-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib \
 			-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib
-	elif [ ! -h $TMPDIR/dist.x86/lib/libjpeg.62.0.0.dylib -a \
+	elif [ ! -h $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib -a \
 		! -h $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib ]; then
-		lipo -create -arch i386 $TMPDIR/dist.x86/lib/libjpeg.62.0.0.dylib \
+		lipo -create \
+			-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib \
 			-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib \
 			-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.0.0.dylib
 	fi
-	lipo -create -arch i386 $TMPDIR/dist.x86/lib/libjpeg.a -arch x86_64 \
+	lipo -create \
-		$PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.a \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libjpeg.a \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.a \
 		-output $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.a
-	lipo -create -arch i386 $TMPDIR/dist.x86/lib/libturbojpeg.dylib -arch x86_64 \
+	lipo -create \
-		$PKGROOT/usr/lib/libturbojpeg.dylib \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libturbojpeg.dylib \
+		-arch x86_64 $PKGROOT/usr/lib/libturbojpeg.dylib \
 		-output $PKGROOT/usr/lib/libturbojpeg.dylib
-	lipo -create -arch i386 $TMPDIR/dist.x86/lib/libturbojpeg.a -arch x86_64 \
+	lipo -create \
-		$PKGROOT/usr/lib/libturbojpeg.a \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/lib/libturbojpeg.a \
+		-arch x86_64 $PKGROOT/usr/lib/libturbojpeg.a \
 		-output $PKGROOT/usr/lib/libturbojpeg.a
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/cjpeg \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/cjpeg \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/cjpeg
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/djpeg \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/djpeg \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/djpeg
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/jpegtran \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/jpegtran \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/jpegtran
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/rdjpgcom \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/rdjpgcom \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/rdjpgcom
+	lipo -create \
+		-arch i386 $TMPDIR/dist.x86/opt/$PACKAGE_NAME/bin/wrjpgcom \
+		-arch x86_64 $PKGROOT/opt/$PACKAGE_NAME/bin/wrjpgcom \
+		-output $PKGROOT/opt/$PACKAGE_NAME/bin/wrjpgcom
+
 fi
 
 install_name_tool -id /opt/$PACKAGE_NAME/lib/libjpeg.62.dylib $PKGROOT/opt/$PACKAGE_NAME/lib/libjpeg.62.dylib
 install_name_tool -id libturbojpeg.dylib $PKGROOT/usr/lib/libturbojpeg.dylib
 
+ln -fs /usr/include/turbojpeg.h $PKGROOT/opt/$PACKAGE_NAME/include/
+ln -fs /usr/lib/libturbojpeg.a $PKGROOT/opt/$PACKAGE_NAME/lib/
+ln -fs lib $PKGROOT/opt/$PACKAGE_NAME/lib32
+ln -fs lib $PKGROOT/opt/$PACKAGE_NAME/lib64
+
 mkdir -p $PKGROOT/Library/Documentation/$PACKAGE_NAME
 chmod 1775 $PKGROOT/Library
 chmod 775 $PKGROOT/Library/Documentation 
@@ -106,6 +137,7 @@ install -m 644 $SRCDIR/LGPL.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/LGP
 install -m 644 $SRCDIR/README-turbo.txt $PKGROOT/Library/Documentation/$PACKAGE_NAME/README-turbo.txt 
 install -m 644 $SRCDIR/README $PKGROOT/Library/Documentation/$PACKAGE_NAME/README 
 install -m 644 $SRCDIR/libjpeg.doc $PKGROOT/Library/Documentation/$PACKAGE_NAME/libjpeg.doc 
+install -m 644 $SRCDIR/usage.doc $PKGROOT/Library/Documentation/$PACKAGE_NAME/usage.doc 
 
 sudo chown -R root:admin $PKGROOT 
 sudo chown -R root:0 $PKGROOT/usr 

release/makerpm

@@ -11,7 +11,7 @@ TMPDIR=
 onexit()
 {
 	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
+		rm -rf $TMPDIR
 	fi
 }
 

release/makesrpm

@@ -11,7 +11,7 @@ TMPDIR=
 onexit()
 {
 	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
+		rm -rf $TMPDIR
 	fi
 }
 

release/makesunpkg

@@ -11,7 +11,7 @@ TMPDIR=
 onexit()
 {
 	if [ ! "$TMPDIR" = "" ]; then
-		sudo rm -rf $TMPDIR
+		rm -rf $TMPDIR
 	fi
 }
 
@@ -38,8 +38,6 @@ fi
 umask 022
 TMPDIR=`mktemp -d /tmp/$PACKAGE_NAME-build.XXXXXX`
 rm -f $PACKAGE_NAME.pkg.bz2
-PKGROOT=$TMPDIR/pkgbuild/$PACKAGE_NAME
-mkdir -p $PKGROOT
 cp $SRCDIR/release/copyright $TMPDIR
 touch $TMPDIR/depend
 cat $SRCDIR/release/pkginfo.tmpl | sed s/{__VERSION}/$VERSION/g \
@@ -53,8 +51,6 @@ else
 fi
 
 # This mess is to work around a bug in /usr/ccs/bin/make
-make install prefix=$PKGROOT libdir=$PKGROOT/$__LIB AM_MAKEFLAGS="prefix=$PKGROOT libdir=$PKGROOT/$__LIB"
-rm -f $PKGROOT/$__LIB/*.la
 if [ $COMBINED = 1 ]; then
 	if [ ! -d $SRCDIR/solx86 ]; then
 		mkdir -p $SRCDIR/solx86
@@ -62,55 +58,74 @@ if [ $COMBINED = 1 ]; then
 	PWD=`pwd`
 	cd $SRCDIR/solx86
 	sh $SRCDIR/configure --with-pic CC=$CC CXX=$CXX CFLAGS= CXXFLAGS= LDFLAGS= host_alias=
-	make install prefix=$PKGROOT AM_MAKEFLAGS="prefix=$PKGROOT"
+	make install DESTDIR=$TMPDIR mandir=/opt/$PACKAGE_NAME/man AM_MAKEFLAGS="mandir=/opt/$PACKAGE_NAME/man"
 	cd $PWD
 fi
-mkdir -p $PKGROOT/doc
+make install DESTDIR=$TMPDIR libdir=/opt/$PACKAGE_NAME/$__LIB mandir=/opt/$PACKAGE_NAME/man AM_MAKEFLAGS="libdir=/opt/$PACKAGE_NAME/$__LIB mandir=/opt/$PACKAGE_NAME/man"
-cp $SRCDIR/LICENSE.txt $SRCDIR/LGPL.txt $SRCDIR/README-turbo.txt $SRCDIR/README $SRCDIR/libjpeg.doc $PKGROOT/doc
+rm -f $TMPDIR/opt/$PACKAGE_NAME/$__LIB/*.la
-chmod 644 $PKGROOT/doc/*
+mkdir -p $TMPDIR/opt/$PACKAGE_NAME/doc
+cp $SRCDIR/LICENSE.txt $SRCDIR/LGPL.txt $SRCDIR/README-turbo.txt $SRCDIR/README $SRCDIR/libjpeg.doc $SRCDIR/usage.doc $TMPDIR/opt/$PACKAGE_NAME/doc
+chmod 644 $TMPDIR/opt/$PACKAGE_NAME/doc/*
 
 cat >$TMPDIR/proto <<EOF
 i copyright
 i depend
 i pkginfo
-d none libjpeg-turbo 0755 root bin
+d none $PACKAGE_NAME 0755 root bin
-d none libjpeg-turbo/lib 0755 root bin
+d none $PACKAGE_NAME/bin 0755 root bin
+f none $PACKAGE_NAME/bin/cjpeg 0755 root bin
+f none $PACKAGE_NAME/bin/djpeg 0755 root bin
+f none $PACKAGE_NAME/bin/jpegtran 0755 root bin
+f none $PACKAGE_NAME/bin/rdjpgcom 0755 root bin
+f none $PACKAGE_NAME/bin/wrjpgcom 0755 root bin
+d none $PACKAGE_NAME/lib 0755 root bin
 EOF
 if [ $COMBINED = 1 ]; then
 cat >>$TMPDIR/proto <<EOF
-f none libjpeg-turbo/lib/libjpeg.so.62.0.0 0755 root bin
+f none $PACKAGE_NAME/lib/libjpeg.so.62.0.0 0755 root bin
-s none libjpeg-turbo/lib/libjpeg.so.62=libjpeg.so.62.0.0
+s none $PACKAGE_NAME/lib/libjpeg.so.62=libjpeg.so.62.0.0
-s none libjpeg-turbo/lib/libjpeg.so=libjpeg.so.62.0.0
+s none $PACKAGE_NAME/lib/libjpeg.so=libjpeg.so.62.0.0
-f none libjpeg-turbo/lib/libjpeg.a 0644 root bin
+f none $PACKAGE_NAME/lib/libjpeg.a 0644 root bin
-f none libjpeg-turbo/lib/libturbojpeg.so 0755 root bin
+f none $PACKAGE_NAME/lib/libturbojpeg.so 0755 root bin
-f none libjpeg-turbo/lib/libturbojpeg.a 0644 root bin
+f none $PACKAGE_NAME/lib/libturbojpeg.a 0644 root bin
 EOF
 fi
 if [ "${__LIB}" != "lib" ]; then
-echo d none libjpeg-turbo/${__LIB} 0755 root bin >>$TMPDIR/proto
+echo d none $PACKAGE_NAME/${__LIB} 0755 root bin >>$TMPDIR/proto
+echo s none $PACKAGE_NAME/lib64=${__LIB} >>$TMPDIR/proto
+echo s none $PACKAGE_NAME/lib/64=$PKGARCH >>$TMPDIR/proto
 fi
 cat >>$TMPDIR/proto <<EOF
-f none libjpeg-turbo/${__LIB}/libjpeg.so.62.0.0 0755 root bin
+f none $PACKAGE_NAME/${__LIB}/libjpeg.so.62.0.0 0755 root bin
-s none libjpeg-turbo/${__LIB}/libjpeg.so.62=libjpeg.so.62.0.0
+s none $PACKAGE_NAME/${__LIB}/libjpeg.so.62=libjpeg.so.62.0.0
-s none libjpeg-turbo/${__LIB}/libjpeg.so=libjpeg.so.62.0.0
+s none $PACKAGE_NAME/${__LIB}/libjpeg.so=libjpeg.so.62.0.0
-f none libjpeg-turbo/${__LIB}/libjpeg.a 0644 root bin
+f none $PACKAGE_NAME/${__LIB}/libjpeg.a 0644 root bin
-f none libjpeg-turbo/${__LIB}/libturbojpeg.so 0755 root bin
+f none $PACKAGE_NAME/${__LIB}/libturbojpeg.so 0755 root bin
-f none libjpeg-turbo/${__LIB}/libturbojpeg.a 0644 root bin
+f none $PACKAGE_NAME/${__LIB}/libturbojpeg.a 0644 root bin
-d none libjpeg-turbo/include 0755 root bin
+s none $PACKAGE_NAME/lib32=lib
-f none libjpeg-turbo/include/jconfig.h 0644 root bin
+d none $PACKAGE_NAME/man 0755 root bin
-f none libjpeg-turbo/include/jerror.h 0644 root bin
+d none $PACKAGE_NAME/man/man1 0755 root bin
-f none libjpeg-turbo/include/jmorecfg.h 0644 root bin
+d none $PACKAGE_NAME/man/man1/cjpeg.1 0644 root bin
-f none libjpeg-turbo/include/jpeglib.h 0644 root bin
+d none $PACKAGE_NAME/man/man1/djpeg.1 0644 root bin
-f none libjpeg-turbo/include/turbojpeg.h 0644 root bin
+d none $PACKAGE_NAME/man/man1/jpegtran.1 0644 root bin
-d none libjpeg-turbo/doc 0755 root bin
+d none $PACKAGE_NAME/man/man1/rdjpgcom.1 0644 root bin
-f none libjpeg-turbo/doc/LGPL.txt 0644 root bin
+d none $PACKAGE_NAME/man/man1/wrjpgcom.1 0644 root bin
-f none libjpeg-turbo/doc/libjpeg.doc 0644 root bin
+d none $PACKAGE_NAME/include 0755 root bin
-f none libjpeg-turbo/doc/LICENSE.txt 0644 root bin
+f none $PACKAGE_NAME/include/jconfig.h 0644 root bin
-f none libjpeg-turbo/doc/README 0644 root bin
+f none $PACKAGE_NAME/include/jerror.h 0644 root bin
-f none libjpeg-turbo/doc/README-turbo.txt 0644 root bin
+f none $PACKAGE_NAME/include/jmorecfg.h 0644 root bin
+f none $PACKAGE_NAME/include/jpeglib.h 0644 root bin
+f none $PACKAGE_NAME/include/turbojpeg.h 0644 root bin
+d none $PACKAGE_NAME/doc 0755 root bin
+f none $PACKAGE_NAME/doc/LGPL.txt 0644 root bin
+f none $PACKAGE_NAME/doc/libjpeg.doc 0644 root bin
+f none $PACKAGE_NAME/doc/LICENSE.txt 0644 root bin
+f none $PACKAGE_NAME/doc/README 0644 root bin
+f none $PACKAGE_NAME/doc/README-turbo.txt 0644 root bin
+f none $PACKAGE_NAME/doc/usage.doc 0644 root bin
 EOF
 
-pkgmk -o -r $TMPDIR/pkgbuild -d $TMPDIR -a i386 -f $TMPDIR/proto
+pkgmk -o -r $TMPDIR/opt -d $TMPDIR -a i386 -f $TMPDIR/proto
 pkgtrans -s $TMPDIR $TMPDIR/$PACKAGE_NAME.pkg $PACKAGE_NAME
 bzip2 $TMPDIR/$PACKAGE_NAME.pkg
 cp $TMPDIR/$PACKAGE_NAME.pkg.bz2 . 

release/uninstall.sh.tmpl

@@ -46,12 +46,23 @@ cd $PWD
 
 echo Removing directories ...
 rmdir /opt/$PKGNAME/bin 2>&1 || RETCODE=-1
+if [ -d /opt/$PKGNAME/bin ]; then
+	rmdir /opt/$PKGNAME/bin 2>&1 || RETCODE=-1
+fi
 if [ -d /opt/$PKGNAME/lib ]; then
 	rmdir /opt/$PKGNAME/lib 2>&1 || RETCODE=-1
 fi
 if [ -d /opt/$PKGNAME/include ]; then
 	rmdir /opt/$PKGNAME/include 2>&1 || RETCODE=-1
 fi
+rm /opt/$PKGNAME/lib32 2>&1 || RETCODE=-1
+rm /opt/$PKGNAME/lib64 2>&1 || RETCODE=-1
+if [ -d /opt/$PKGNAME/man/man1 ]; then
+	rmdir /opt/$PKGNAME/man/man1 2>&1 || RETCODE=-1
+fi
+if [ -d /opt/$PKGNAME/man ]; then
+	rmdir /opt/$PKGNAME/man 2>&1 || RETCODE=-1
+fi
 rmdir /opt/$PKGNAME 2>&1 || RETCODE=-1
 rmdir /Library/Documentation/$PKGNAME 2>&1 || RETCODE=-1
 

turbojpeg.h

@@ -25,6 +25,8 @@
 #define NUMSUBOPT 4
 
 enum {TJ_444=0, TJ_422, TJ_420, TJ_GRAYSCALE};
+#define TJ_411 TJ_420  /* for backward compatibility with VirtualGL <= 2.1.x,
+                          TurboVNC <= 0.6, and TurboJPEG/IPP */
 
 /* Flags */
 #define TJ_BGR             1

win/Makerules

@@ -13,7 +13,7 @@ endif
 
 _DUMMY := $(shell mkdir -p $(ODIR))
 
-VERSION = 0.0.93
+VERSION = 1.0.0
 
 CC = "cl" -nologo
 CXX = "cl" -EHsc -nologo