The IJG README file has been renamed to README.ijg, in order to avoid
confusion (many people were assuming that that was our project's README
file and weren't reading README-turbo.txt) and to lay the groundwork for
markdown versions of the libjpeg-turbo README and build instructions.
Add command line option -quant-baseline to cjpeg to force quantization
table entries to be in 1-255 range for JPEG baseline compatibility. See
related discussion in #145
Initial implementation of trellis quantization for arithmetic coding.
The rate computation does not yet implement all rules of the entropy
coder and may thus be suboptimal.
Fix pass number computation in scan optimization to support case where
Huffman table optimization is not done, e.g. when arithmetic coding is
used
Enable combination of arithmetic coding and scan optimization
(previously disabled)
Add extension parameter JFLOAT_TRELLIS_DELTA_DC_WEIGHT that controls
how distortion is calculated in DC trellis quantization. The parameter
defines weighting between actual distortion of DC and distortion of
vertical gradient of DC.
By default the parameter is 0.0 and has no effect.
Addresses #117
This eliminates JBOOLEAN_USE_MOZ_DEFAULTS and replaces it with
JINT_COMPRESS_PROFILE, a more flexible and descriptive parameter. Currently,
this new parameter works in much the same way as the old-- it changes the
behavior of jpeg_set_defaults(). It currently supports only two values
(max. compression, i.e. mozjpeg defaults, and fastest, i.e. libjpeg-turbo
defaults), but it can be extended in the future with additional profiles that
balance compression ratio with performance.
JBOOLEAN_ONE_DC_SCAN and JBOOLEAN_SEP_DC_SCAN are merged into a single
parameter JINT_DC_SCAN_OPT_MODE
Default behavior is modified to use one DC scan per component
Since mozjpeg is now backward ABI-compatible with libjpeg[-turbo], it is now
possible to temporarily load mozjpeg into a binary application and cause that
application to generate uber-compressed JPEGs (at the expense of an extreme
performance loss, of course.) For instance, someone could do
LD_LIBRARY_PATH=/opt/mozjpeg/lib convert blah_blah_blah
to make ImageMagick use mozjpeg instead of the system's pre-installed JPEG
library (libjpeg-turbo, in most cases.) However, this only makes sense if
mozjpeg is actually producing different behavior by default than libjpeg-turbo.
Currently it isn't. Currently it requires the application to set
JBOOLEAN_USE_MOZ_DEFAULTS to TRUE in order to enable the mozjpeg-specific
behavior, but of course applications that were built to use libjpeg[-turbo]
won't do that. Thus, this patch sets use_moz_defaults to TRUE by default,
requiring an application to explicitly set it to FALSE in order to revert to
the libjpeg[-turbo] behavior (makes sense, since the only applications that
would need to revert to the libjpeg[-turbo] behavior would be mozjpeg-aware
applications.)
Note that we discussed the possibility of adding a function
(jpeg_revert_defaults()), which would act the same as jpeg_set_defaults() does
in libjpeg[-turbo]. This is a good solution for implementing the -revert
switch in cjpeg, but unfortunately it doesn't work for jpegtran. The reason
is that jpeg_set_defaults() is called within the body of
jpeg_copy_critical_parameters(), which is part of the API. So yet again,
if mozjpeg were loaded into a non-mozjpeg-aware application at run time, it
would be desirable for jpeg_copy_critical_parameters() to set the parameters
to mozjpeg defaults. That means that, in order to implement the -revert
switch in jpegtran, it would be necessary to introduce a new function
(jpeg_revert_critical_parameters(), perhaps). It seems cleaner to just keep
using the JBOOLEAN_USE_MOZ_DEFAULTS parameter to control the behavior of
jpeg_set_defaults(), even though this represents a minor abuse of the libjpeg
API (jpeg_set_defaults() is technically supposed to set all of the parameters
to defaults, irrespective of any previous state. However, as long as we
document that JBOOLEAN_USE_MOZ_DEFAULTS works differently, then it should be
OK.)
For whatever reason, some of these files didn't get fully merged from
libjpeg-turbo 1.4. They still contained tab characters and other formatting
conventions from libjpeg-turbo 1.3. This patch also fixes some obvious
indentation errors in the mozjpeg-specific code. There is more formatting work
that needs to be done to the mozjpeg-specific code, to fix line overruns,
incorrect operator whitespace, and other issues that make it not consistent
with the libjpeg/libjpeg-turbo code.
* origin/master: (23 commits)
Update .gitignore
.func/.endfunc are only necessary when generating STABS debug info, which basically went out of style with parachute pants and Rick Astley. At any rate, none of the platforms for which we're building the ARM code use it (DWARF is the common format these days), and the .func/.endfunc directives cause the clang integrated assembler to fail (http://llvm.org/bugs/show_bug.cgi?id=20424).
Enable DC trellis by default
Avoid double inline attribute
Detect libpng
Implement DHT Merging
Add .gitignore for autotools files
Check memory alloc success
Update cjpeg usage text
Implement DQT merging
Fix issue with scan printout
Get rid of unnecessary and obsolete platform configuration instructions.
Add error checks for malloc calls that don't already have them. Issue #87.
yuvjpeg: fix trivial leak
Parse quality as float
PNG reading support
Fix issue with DC trellis
Add option to split DC scans
Add trellis for DC
Bump version to 2.1.
...
Conflicts:
BUILDING.txt
cdjpeg.h
jcdctmgr.c
jchuff.h
jcmarker.c
jcmaster.c
jconfig.txt
jpeglib.h
rdswitch.c
* commit 'b8d044a666056d4d8d28d7a5d0805ac32b619b36': (58 commits)
Big oops. wrjpgcom on Windows was being built using the rdjpgcom source.
Prevent a buffer overrun if the comment begins with a literal quote character and the string exceeds 65k characters. Also prevent comments longer than 65k characters from being written, since this will produce an incorrect JPEG file.
Remove VMS-specific code
Our copyright string is longer than JMSG_LENGTH_MAX, and this was causing a buffer overrun if output_message() was called with msg_code set to JMSG_COPYRIGHT, or if format_message() was called with msg_code set to JMSG_COPYRIGHT and with a buffer of length JMSG_LENGTH_MAX.
We don't support non-ANSI C compilers
Allow for building the MIPS DSPr2 extensions if the host is mips-* as well as mipsel-*. The DSPr2 extensions are little endian, so we still have to check that the compiler defines __MIPSEL__ before enabling them. This paves the way for supporting big-endian MIPS, and in the near term, it allows the SIMD extensions to be built with Sourcery CodeBench.
SIMD-accelerated int upsample routine for MIPS DSPr2
Fix MIPS build
libjpeg-turbo has never supported non-ANSI compilers, so get rid of the crufty SIZEOF() macro. It was not being used consistently anyhow, so it would not have been possible to build prior releases of libjpeg-turbo using the broken compilers for which that macro was designed.
Remove MS-DOS code and information, and adjust copyright headers to reflect the removal of features in r1307 and r1308. libjpeg-turbo has never supported MS-DOS, nor is it even possible for us to do so.
Further copyright header cleanup
Further copyright header cleanup
Get rid of the HAVE_PROTOTYPES configuration option, as well as the related JMETHOD and JPP macros. libjpeg-turbo has never supported compilers that don't handle prototypes. Doing so requires ansi2knr, which isn't even supported in the IJG code anymore.
Remove all of the NEED_SHORT_EXTERNAL_NAMES stuff. There is scant information available as to which linkers ever had a 15-character global symbol name limit. AFAICT, it might have been a VMS and/or a.out BSD thing, but none of those platforms have ever been supported by libjpeg-turbo (nor are such systems supported by other open source libraries of this nature.)
Clean up code formatting in the SIMD interface functions
SIMD-accelerated NULL convert routine for MIPS DSPr2
Fix build, which was broken by the checkin of the MIPS DSPr2 accelerated smooth downsampling routine. Until/unless other platforms include SIMD support for that function, it's just easier to #ifdef around it rather than adding stubs for the other platforms.
Fix error in MIPS DSPr2 accelerated smooth downsample routine
SIMD-accelerated h2v2 smooth downsampling routine for MIPS DSPr2
Minor tweak to improve code readability
...
Conflicts:
BUILDING.txt
CMakeLists.txt
Makefile.am
cdjpeg.h
cjpeg.1
cjpeg.c
configure.ac
djpeg.1
example.c
jccoefct.c
jcdctmgr.c
jchuff.c
jchuff.h
jcinit.c
jcmaster.c
jcparam.c
jcphuff.c
jidctflt.c
jpegint.h
jpeglib.h
jversion.h
libjpeg.txt
rdswitch.c
simd/CMakeLists.txt
tjbench.c
turbojpeg.c
usage.txt
wrjpgcom.c
Command line option -split-dc-scan is added to code DC scans
independently (instead of interleaved). It should be determined whether
this option introduces any decoder compatibility issues ( see #83 )
Option -multidcscan is renamed to -opt-dc-scan
Add option to apply trellis quantization to the DC coefficients ( see
#57 ). May need further refinement to make sure block order during
trellis optimization matches order during coding.
Add macro JPEG_RAW_READER that defines whether to pass RAW sample data
from input to output JPEG files (hence preserving color space and
sampling). Macro is now disabled by default.
Add code to copy metadata from input to output JPEG, hence preserving
color profiles and other important information
Value of cinfo->one_dc_scan is set to true by default to use a single
DC scan for all components.
Option -onedcscan is replaced by -multidcscan to enable multiple DC
scans.
While this change appears to degrade compression performance it
improves compatibility with a wider range of JPEG decoders.
Add option to have a single DC scan wherein all components are
interleaved when using progressive mode. This may resolve compatibility
issues raised in #29 and #48.
This option is available through -onedcscan in cjpeg
