With respect to tj3Transform(), this addresses an oversight from
bb1d540a80.
Note to self: A convenience function/method for computing the worst-case
transformed JPEG size for a particular transform would be nice.
Lossless cropping is performed after other lossless transform
operations, so the cropping region must be specified relative to the
destination image dimensions and level of chrominance subsampling, not
the source image dimensions and level of chrominance subsampling.
More specifically, if the lossless transform operation swaps the X and Y
axes, or if the image is converted to grayscale, then that changes the
cropping region requirements.
When used with TJPARAM_NOREALLOC and with TJXOP_TRANSPOSE,
TJXOP_TRANSVERSE, TJXOP_ROT90, or TJXOP_ROT270, tj3Transform()
incorrectly based the destination buffer size for a transform on the
source image dimensions rather than the transformed image dimensions.
This was apparently a long-standing bug that had existed in the
tj*Transform() function since its inception. As initially implemented
in the evolving libjpeg-turbo v1.2 code base, tjTransform() required
dstSizes[i] to be set regardless of whether TJFLAG_NOREALLOC (the
predecessor to TJPARAM_NOREALLOC) was set.
ff78e37595, which was introduced later in
the evolving libjpeg-turbo v1.2 code base, removed that requirement and
planted the seed for the bug. However, the bug was not activated until
9b49f0e4c7 was introduced still later in
the evolving libjpeg-turbo v1.2 code base, adding a subsampling type
argument to the (new at the time) tjBufSize() function and thus making
the width and height arguments no longer commutative.
The bug opened up the possibility that a JPEG source image could cause
tj3Transform() to overflow the destination buffer for a transform if all
of the following were true:
- The JPEG source image used 4:2:2, 4:4:0, 4:1:1, or 4:4:1 subsampling.
(These are the only subsampling types for which the width and height
arguments to tj3JPEGBufSize() are not commutative.)
- The width and height of the JPEG source image were such that
tj3JPEGBufSize(height, width, subsamplingType) returned a smaller
value than tj3JPEGBufSize(width, height, subsamplingType).
- The JPEG source image contained enough metadata that the size of the
transformed image was larger than
tj3JPEGBufSize(height, width, subsamplingType).
- TJPARAM_NOREALLOC was set.
- TJXOP_TRANSPOSE, TJXOP_TRANSVERSE, TJXOP_ROT90, or TJXOP_ROT270 was
used.
- TJXOPT_COPYNONE was not set.
- TJXOPT_CROP was not set.
- The calling program allocated
tj3JPEGBufSize(height, width, subsamplingType) bytes for the
destination buffer, as the API documentation instructs.
The API documentation cautions that JPEG source images containing a
large amount of extraneous metadata (EXIF, IPTC, ICC, etc.) cannot
reliably be transformed if TJPARAM_NOREALLOC is set and TJXOPT_COPYNONE
is not set. Irrespective of the bug, there are still cases in which a
JPEG source image with a large amount of metadata can, when transformed,
exceed the worst-case transformed JPEG image size. For instance, if you
try to losslessly crop a JPEG image with 3 kB of EXIF data to 16x16
pixels, then you are guaranteed to exceed the worst-case 16x16 JPEG
image size unless you discard the EXIF data.
Even without the bug, tj3Transform() will still fail with "Buffer passed
to JPEG library is too small" when attempting to transform JPEG source
images that meet the aforementioned criteria. The bug is that the
function segfaults rather than failing gracefully, but the chances of
that occurring in a real-world application are very slim. Any
real-world application developers who attempted to transform arbitrary
JPEG source images with TJPARAM_NOREALLOC set would very quickly realize
that they cannot reliably do that without also setting TJXOPT_COPYNONE.
Thus, I posit that the actual risk posed by this bug is low.
Applications such as web browsers that are the most exposed to security
risks from arbitrary JPEG source images do not use the TurboJPEG
lossless transform feature. (None of those applications even use the
TurboJPEG API, to the best of my knowledge, and the public libjpeg API
has no equivalent transform function.) Our only command-line interface
to the tj3Transform() function, TJBench, was not exposed to the bug
because it had a compatible bug whereby it allocated the JPEG
destination buffer to the same size that tj3Transform() erroneously
expected. The TurboJPEG Java API was also not exposed to the bug
because of a similar compatible bug in the
Java_org_libjpegturbo_turbojpeg_TJTransformer_transform() JNI function.
(This commit fixes both compatible bugs.)
In short, best practices for tj3Transform() are to use TJPARAM_NOREALLOC
only with JPEG source images that are known to be free of metadata (such
as images generated by tj3Compress*()) or to use TJXOPT_COPYNONE along
with TJPARAM_NOREALLOC. Still, however, the function shouldn't segfault
as long as the calling program allocates the suggested amount of space
for the JPEG destination buffer.
Usability notes:
tj3Transform() could hypothetically require dstSizes[i] to be set
regardless of the value of TJPARAM_NOREALLOC, but there are usability
pitfalls either way. The main pitfall I sought to avoid with
ff78e37595 was a calling program failing
to set dstSizes[i] at all, thus leaving its value undefined. It could
be argued that requiring dstSizes[i] to be set in all cases is more
consistent, but it could also be argued that not requiring it to be set
when TJPARAM_NOREALLOC is set is more user-proof. tj3Transform() could
also hypothetically set TJXOPT_COPYNONE automatically when
TJPARAM_NOREALLOC is set, but that could lead to user confusion.
Ultimately, I would like to address these issues in TurboJPEG v4 by
using managed buffer objects, but that would be an extensive overhaul.
(ChangeLog update forthcoming)
- Prefix all function names with "tj3" and remove version suffixes from
function names. (Future API overhauls will increment the prefix to
"tj4", etc., thus retaining backward API/ABI compatibility without
versioning each individual function.)
- Replace stateless boolean flags (including TJ*FLAG_ARITHMETIC and
TJ*FLAG_LOSSLESS, which were never released) with stateful integer
parameters, the value of which persists between function calls.
* Use parameters for the JPEG quality and subsampling as well, in
order to eliminate the awkwardness of specifying function arguments
that weren't relevant for lossless compression.
* tj3DecompressHeader() now stores all relevant information about the
JPEG image, including the width, height, subsampling type, entropy
coding type, etc. in parameters rather than returning that
information in its arguments.
* TJ*FLAG_LIMITSCANS has been reimplemented as an integer parameter
(TJ*PARAM_SCANLIMIT) that allows the number of scans to be
specified.
- Use the const keyword for all pointer arguments to unmodified
buffers, as well as for both dimensions of 2D pointers. Addresses
#395.
- Use size_t rather than unsigned long to represent buffer sizes, since
unsigned long is a 32-bit type on Windows. Addresses #24.
- Return 0 from all buffer size functions if an error occurs, rather
than awkwardly trying to return -1 in an unsigned data type.
- Implement 12-bit and 16-bit data precision using dedicated
compression, decompression, and image I/O functions/methods.
* Suffix the names of all data-precision-specific functions with 8,
12, or 16.
* Because the YUV functions are intended to be used for video, they
are currently only implemented with 8-bit data precision, but they
can be expanded to 12-bit data precision in the future, if
necessary.
* Extend TJUnitTest and TJBench to test 12-bit and 16-bit data
precision, using a new -precision option.
* Add appropriate regression tests for all of the above to the 'test'
target.
* Extend tjbenchtest to test 12-bit and 16-bit data precision, and
add separate 'tjtest12' and 'tjtest16' targets.
* BufferedImage I/O in the Java API is currently limited to 8-bit
data precision, since the BufferedImage class does not
straightforwardly support higher data precisions.
* Extend the PPM reader to convert 12-bit and 16-bit PBMPLUS files
to grayscale or CMYK pixels, as it already does for 8-bit files.
- Properly accommodate lossless JPEG using dedicated parameters
(TJ*PARAM_LOSSLESS, TJ*PARAM_LOSSLESSPSV, and TJ*PARAM_LOSSLESSPT),
rather than using a flag and awkwardly repurposing the JPEG quality.
Update TJBench to properly reflect whether a JPEG image is lossless.
- Re-organize the TJBench usage screen.
- Update the Java docs using Java 11, to improve the formatting and
eliminate HTML frames.
- Use the accurate integer DCT algorithm by default for both
compression and decompression, since the "fast" algorithm is a legacy
feature, it does not pass the ISO compliance tests, and it is not
actually faster on modern x86 CPUs.
* Remove the -accuratedct option from TJBench and TJExample.
- Re-implement the 'tjtest' target using a CMake script that enables
the appropriate tests, depending on the data precision and whether or
not the Java API is part of the build.
- Consolidate the C and Java versions of tjbenchtest into one script.
- Consolidate the C and Java versions of tjexampletest into one script.
- Combine all initialization functions into a single function
(tj3Init()) that accepts an integer parameter specifying the
subsystems to initialize.
- Enable decompression scaling explicitly, using a new function/method
(tj3SetScalingFactor()/TJDecompressor.setScalingFactor()), rather
than implicitly using awkward "desired width"/"desired height"
parameters.
- Introduce a new macro/constant (TJUNSCALED/TJ.UNSCALED) that maps to
a scaling factor of 1/1.
- Implement partial image decompression, using a new function/method
(tj3SetCroppingRegion()/TJDecompressor.setCroppingRegion()) and
TJBench option (-crop). Extend tjbenchtest to test the new feature.
Addresses #1.
- Allow the JPEG colorspace to be specified explicitly when
compressing, using a new parameter (TJ*PARAM_COLORSPACE). This
allows JPEG images with the RGB and CMYK colorspaces to be created.
- Remove the error/difference image feature from TJBench. Identical
images to the ones that TJBench created can be generated using
ImageMagick with
'magick composite <original_image> <output_image> -compose difference <diff_image>'
- Handle JPEG images with unknown subsampling types. TJ*PARAM_SUBSAMP
is set to TJ*SAMP_UNKNOWN (== -1) for such images, but they can still
be decompressed fully into packed-pixel images or losslessly
transformed (with the exception of lossless cropping.) They cannot
be partially decompressed or decompressed into planar YUV images.
Note also that TJBench, due to its lack of support for imperfect
transforms, requires that the subsampling type be known when
rotating, flipping, or transversely transposing an image. Addresses
#436
- The Java version of TJBench now has identical functionality to the C
version. This was accomplished by (somewhat hackishly) calling the
TurboJPEG C image I/O functions through JNI and copying the pixels
between the C heap and the Java heap.
- Add parameters (TJ*PARAM_RESTARTROWS and TJ*PARAM_RESTARTBLOCKS) and
a TJBench option (-restart) to allow the restart marker interval to
be specified when compressing. Eliminate the undocumented TJ_RESTART
environment variable.
- Add a parameter (TJ*PARAM_OPTIMIZE), a transform option
(TJ*OPT_OPTIMIZE), and a TJBench option (-optimize) to allow
optimized baseline Huffman coding to be specified when compressing.
Eliminate the undocumented TJ_OPTIMIZE environment variable.
- Add parameters (TJ*PARAM_XDENSITY, TJ*PARAM_DENSITY, and
TJ*DENSITYUNITS) to allow the pixel density to be specified when
compressing or saving a Windows BMP image and to be queried when
decompressing or loading a Windows BMP image. Addresses #77.
- Refactor the fuzz targets to use the new API.
* Extend decompression coverage to 12-bit and 16-bit data precision.
* Replace the awkward cjpeg12 and cjpeg16 targets with proper
TurboJPEG-based compress12, compress12-lossless, and
compress16-lossless targets
- Fix innocuous UBSan warnings uncovered by the new fuzzers.
- Implement previous versions of the TurboJPEG API by wrapping the new
functions (tested by running the 2.1.x versions of TJBench, via
tjbenchtest, and TJUnitTest against the new implementation.)
* Remove all JNI functions for deprecated Java methods and implement
the deprecated methods using pure Java wrappers. It should be
understood that backward API compatibility in Java applies only to
the Java classes and that one cannot mix and match a JAR file from
one version of libjpeg-turbo with a JNI library from another
version.
- tj3Destroy() now silently accepts a NULL handle.
- tj3Alloc() and tj3Free() now return/accept void pointers, as malloc()
and free() do.
- The image I/O functions now accept a TurboJPEG instance handle, which
is used to transmit/receive parameters and to receive error
information.
Closes#517
Because Java array sizes are ints, the various size methods in the TJ
class have int return values. Thus, we have to guard against signed
int overflow at the JNI level, because the C functions can return sizes
greater than INT_MAX.
This also adds a test for TJ.planeWidth() and TJ.planeHeight(), in order
to validate 8a1526a442 in Java.
This is similar to the fix that 2a9e3bd743
applied to the C API. We have to apply it separately at the JNI level
because the Java API always stores buffer sizes in 32-bit integers, and
the C buffer size functions could overflow an int when using 64-bit
code. (NOTE: The Java API stores buffer sizes in 32-bit integers
because Java itself always uses 32-bit integers for array sizes.) Since
Java don't allow no buffer overruns 'round here, this commit doesn't
change the ultimate outcome. It just makes the inevitable exception
easier to diagnose.
- Wordsmithing, formatting, and grammar tweaks
- Various clarifications and corrections, including specifying whether
a particular buffer or image is used as a source or destination
- Accommodate/mention features that were introduced since the API
documentation was created.
- For clarity, use "packed-pixel" to describe uncompressed
source/destination images that are not planar YUV.
- Use "row" rather than "line" to refer to a single horizontal group of
pixels or component values, for consistency with the libjpeg API
documentation. (libjpeg also uses "scanline", which is a more archaic
term.)
- Use "alignment" rather than "padding" to refer to the number of bytes
by which a row's width is evenly divisible. This consistifies the
documention of the YUV functions and tjLoadImage(). ("Padding"
typically refers to the number of bytes added to each row, which is
not the same thing.)
- Remove all references to "the underlying codec." Although the
TurboJPEG API originated as a cross-platform wrapper for the Intel
Integrated Performance Primitives, Sun mediaLib, QuickTime, and
libjpeg, none of those TurboJPEG implementations has been maintained
since 2009. Nothing would prevent someone from implementing the
TurboJPEG API without libjpeg-turbo, but such an implementation would
not necessarily have an "underlying codec." (It could be fully
self-contained.)
- Use "destination image" rather than "output image", for consistency,
or describe the type of image that will be output.
- Avoid the term "image buffer" and instead use "byte buffer" to
refer to buffers that will hold JPEG images, or describe the type of
image that will be contained in the buffer. (The Java documentation
doesn't use "byte buffer", because the buffer arrays literally have
"byte" in front of them, and since Java doesn't have pointers, it is
not possible for mere mortals to store any other type of data in those
arrays.)
- C: Use "unified" to describe YUV images stored in a single buffer, for
consistency with the Java documentation.
- Use "planar YUV" rather than "YUV planar". Is is our convention to
describe images using {component layout} {colorspace/pixel format}
{image function}, e.g. "packed-pixel RGB source image" or "planar YUV
destination image."
- C: Document the TurboJPEG API version in which a particular function
or macro was introduced, and reorder the backward compatibility
function stubs in turbojpeg.h alphabetically by API version.
- C: Use Markdown rather than HTML tags, where possible, in the Doxygen
comments.
Add a new TurboJPEG C API function (tjDecompressHeader4()) and Java API
method (TJDecompressor.getFlags()) that return the bitwise OR of any
flags that are relevant to the JPEG image being decompressed (currently
TJFLAG_PROGRESSIVE, TJFLAG_ARITHMETIC, TJFLAG_LOSSLESS, and their Java
equivalents.) This allows a calling program to determine whether the
image being decompressed is a lossless JPEG image, which means that the
decompression scaling feature will not be available and that a
full-sized destination buffer should be allocated.
More specifically, this fixes a buffer overrun in TJBench, TJExample,
and the decompress* fuzz targets that occurred when attempting (in vain)
to decompress a lossless JPEG image with decompression scaling enabled.
The primary purpose of this is to encourage adoption of libjpeg-turbo in
downstream Windows projects that forbid the use of "deprecated"
functions. libjpeg-turbo's usage of those functions was not actually
unsafe, because:
- libjpeg-turbo always checks the return value of fopen() and ensures
that a NULL filename can never be passed to it.
- libjpeg-turbo always checks the return value of getenv() and never
passes a NULL argument to it.
- The sprintf() calls in format_message() (jerror.c) could never
overflow the destination string buffer or leave it unterminated as
long as the buffer was at least JMSG_LENGTH_MAX bytes in length, as
instructed. (Regardless, this commit replaces those calls with
snprintf() calls.)
- libjpeg-turbo never uses sscanf() to read strings or multi-byte
character arrays.
- Because of b7d6e84d6a, wrjpgcom
explicitly checks the bounds of the source and destination strings
before calling strcat() and strcpy().
- libjpeg-turbo always ensures that the destination string is
terminated when using strncpy().
(548490fe5e made this explicit.)
Regarding thread safety:
Technically speaking, getenv() is not thread-safe, because the returned
pointer may be invalidated if another thread sets the same environment
variable between the time that the first thread calls getenv() and the
time that that thread uses the return value. In practice, however, this
could only occur with libjpeg-turbo if:
(1) A multithreaded calling application used the deprecated and
undocumented TJFLAG_FORCEMMX/TJFLAG_FORCESSE/TJFLAG_FORCESSE2 flags in
the TurboJPEG API or set one of the corresponding environment variables
(which are only intended for testing purposes.) Since the TurboJPEG API
library only ever passed string constants to putenv(), the only inherent
risk (i.e. the only risk introduced by the library and not the calling
application) was that the SIMD extensions may have read an incorrect
value from one of the aforementioned environment variables.
or
(2) A multithreaded calling application modified the value of the
JPEGMEM environment variable in one thread while another thread was
reading the value of that environment variable (in the body of
jpeg_create_compress() or jpeg_create_decompress().) Given that the
libjpeg API provides a thread-safe way for applications to modify the
default memory limit without using the JPEGMEM environment variable,
direct modification of that environment variable by calling applications
is not supported.
Microsoft's implementation of getenv_s() does not claim to be
thread-safe either, so this commit uses getenv_s() solely to mollify
Visual Studio. New inline functions and macros (GETENV_S() and
PUTENV_S) wrap getenv_s()/_putenv_s() when building for Visual Studio
and getenv()/setenv() otherwise, but GETENV_S()/PUTENV_S() provide no
advantages over getenv()/setenv() other than parameter validation. They
are implemented solely for convenience.
Technically speaking, strerror() is not thread-safe, because the
returned pointer may be invalidated if another thread changes the locale
and/or calls strerror() between the time that the first thread calls
strerror() and the time that that thread uses the return value. In
practice, however, this could only occur with libjpeg-turbo if a
multithreaded calling application encountered a file I/O error in
tjLoadImage() or tjSaveImage(). Since both of those functions
immediately copy the string returned from strerror() into a thread-local
buffer, the risk is minimal, and the worst case would involve an
incorrect error string being reported to the calling application.
Regardless, this commit uses strerror_s() in the TurboJPEG API library
when building for Visual Studio. Note that strerror_r() could have been
used on Un*x systems, but it would have been necessary to handle both
the POSIX and GNU implementations of that function and perform
widespread compatibility testing. Such is left as an exercise for
another day.
Fixes#568
- Don't check for exceptions immediately after invoking the
GetPrimitiveArrayCritical() method. That method does not throw
exceptions, and checking for them caused -Xcheck:jni to warn about
calling other JNI functions in the scope of
Get/ReleasePrimitiveArrayCritical().
- Check for exceptions immediately after invoking the
CallStaticObjectMethod() method in the PROP2ENV() macro.
- Don't use the Get/ReleasePrimitiveArrayCritical() methods for small
arrays. -Xcheck:jni didn't complain about that, but there is no
performance advantage to using those methods rather than the
Get*ArrayRegion() methods for small arrays, and using
Get*ArrayRegion() makes the code less error-prone.
- Don't release the source/destination planes arrays in the YUV methods
until after the corresponding C TurboJPEG functions have returned.
This programming practice (which exists in other code bases as well)
is a by-product of having used early C compilers that did not properly
handle free(NULL). All modern compilers should properly handle that.
Fixes#398
... including, but not limited to:
- unused macros
- private functions not marked as static
- unprototyped global functions
- variable shadowing
(detected by various non-default GCC 8 warning options)
5ea77d8b77 was insufficient to fix all of
these. In particular, we need to always release the primitive arrays
before throwing an exception, because throwing an exception qualifies as
"using JNI."
Refer to #300
We shouldn't be making JNI calls between GetPrimitiveArrayCritical() and
ReleasePrimitiveArrayCritical(). Apparently Android is stricter about
this than desktop Java.
Issue was introduced in 0713c1bb54.
Fixes#300
Within the libjpeg API code, it seems to be more the convention than not
to separate the macro name and value by two or more spaces, which
improves general readability. Making this consistent across all of
libjpeg-turbo is less about my individual preferences and more about
making it easy to automatically detect variations from our chosen
formatting convention. I intend to release the script I'm using to
validate this stuff, once it matures and stabilizes a bit.
With rare exceptions ...
- Always separate line continuation characters by one space from
preceding code.
- Always use two-space indentation. Never use tabs.
- Always use K&R-style conditional blocks.
- Always surround operators with spaces, except in raw assembly code.
- Always put a space after, but not before, a comma.
- Never put a space between type casts and variables/function calls.
- Never put a space between the function name and the argument list in
function declarations and prototypes.
- Always surround braces ('{' and '}') with spaces.
- Always surround statements (if, for, else, catch, while, do, switch)
with spaces.
- Always attach pointer symbols ('*' and '**') to the variable or
function name.
- Always precede pointer symbols ('*' and '**') by a space in type
casts.
- Use the MIN() macro from jpegint.h within the libjpeg and TurboJPEG
API libraries (using min() from tjutil.h is still necessary for
TJBench.)
- Where it makes sense (particularly in the TurboJPEG code), put a blank
line after variable declaration blocks.
- Always separate statements in one-liners by two spaces.
The purpose of this was to ease maintenance on my part and also to make
it easier for contributors to figure out how to format patch
submissions. This was admittedly confusing (even to me sometimes) when
we had 3 or 4 different style conventions in the same source tree. The
new convention is more consistent with the formatting of other OSS code
bases.
This commit corrects deviations from the chosen formatting style in the
libjpeg API code and reformats the TurboJPEG API code such that it
conforms to the same standard.
NOTES:
- Although it is no longer necessary for the function name in function
declarations to begin in Column 1 (this was historically necessary
because of the ansi2knr utility, which allowed libjpeg to be built
with non-ANSI compilers), we retain that formatting for the libjpeg
code because it improves readability when using libjpeg's function
attribute macros (GLOBAL(), etc.)
- This reformatting project was accomplished with the help of AStyle and
Uncrustify, although neither was completely up to the task, and thus
a great deal of manual tweaking was required. Note to developers of
code formatting utilities: the libjpeg-turbo code base is an
excellent test bed, because AFAICT, it breaks every single one of the
utilities that are currently available.
- The legacy (MMX, SSE, 3DNow!) assembly code for i386 has been
formatted to match the SSE2 code (refer to
ff5685d5344273df321eb63a005eaae19d2496e3.) I hadn't intended to
bother with this, but the Loongson MMI implementation demonstrated
that there is still academic value to the MMX implementation, as an
algorithmic model for other 64-bit vector implementations. Thus, it
is desirable to improve its readability in the same manner as that of
the SSE2 implementation.
- Provide a new C API function and TJException method that allows
calling programs to query the severity of a compression/decompression/
transform error.
- Provide a new flag that instructs the library to immediately stop
compressing/decompressing/transforming if a warning is encountered.
Fixes#151
Introduce a new C API function (tjGetErrorStr2()) that can be used to
retrieve compression/decompression/transform error messages in a
thread-safe (i.e. instance-specific) manner. Retrieving error messages
from global functions is still thread-unsafe.
Addresses a concern expressed in #151.
This reassures the caller that the buffers will not be modified and also
allows read-only buffers to be passed to the functions.
Partially reverts 3947a19f25fc8186d3812dbcf8e70baea36ef652.
Use a new checked exception type (TJException) when passing through
errors from the underlying C library. This gives the application a
choice of catching all exceptions or just those from TurboJPEG.
Throw IllegalArgumentException at the JNI level when arguments to the
JNI function are incorrect, and when one of the TurboJPEG "utility"
functions returns an error (because, per the C API specification, those
functions will only return an error if one of their arguments is out of
range.)
Remove "throws Exception" from the signature of any methods that no
longer pass through an error from the TurboJPEG C library.
Credit Viktor for the new code
Code formatting tweaks
Change the behavior of the bailif0() macro in the JNI wrapper so that it doesn't throw an exception for an unexpected NULL condition. In fact, in all cases, the underlying JNI API function (such as GetFieldID(), etc.) will throw an Error on its own whenever it returns NULL, so our custom exceptions were never being thrown in that case anyhow. All we need to do is just detect the error and bail out of the C code.
This also corrects a couple of formatting issues (semicolons aren't needed at the end of class definitions, and @Override should be specified for the methods we're overriding from super-classes, so the compiler can sanity-check that we're actually overriding a method and not declaring a new one.)
git-svn-id: svn+ssh://svn.code.sf.net/p/libjpeg-turbo/code/trunk@1595 632fc199-4ca6-4c93-a231-07263d6284db
