- Rename jpeg_simple_lossless() to jpeg_enable_lossless() and modify the
function so that it stores the lossless parameters directly in the Ss
and Al fields of jpeg_compress_struct rather than using a scan script.
- Move the cjpeg -lossless switch into "Switches for advanced users".
- Document the libjpeg API and run-time features that are unavailable in
lossless mode, and ensure that all parameters, functions, and switches
related to unavailable features are ignored or generate errors in
lossless mode.
- Defer any action that depends on whether lossless mode is enabled
until jpeg_start_compress()/jpeg_start_decompress() is called.
- Document the purpose of the point transform value.
- "Codec" stands for coder/decoder, so it is a bit awkward to say
"lossless compression codec" and "lossless decompression codec".
Use "lossless compressor" and "lossless decompressor" instead.
- Restore backward API/ABI compatibility with libjpeg v6b:
* Move the new 'lossless' field from the exposed jpeg_compress_struct
and jpeg_decompress_struct structures into the opaque
jpeg_comp_master and jpeg_decomp_master structures, and allocate the
master structures in the body of jpeg_create_compress() and
jpeg_create_decompress().
* Remove the new 'process' field from jpeg_compress_struct and
jpeg_decompress_struct and replace it with the old
'progressive_mode' field and the new 'lossless' field.
* Remove the new 'data_unit' field from jpeg_compress_struct and
jpeg_decompress_struct and replace it with a locally-computed
data unit variable.
* Restore the names of macros and fields that refer to DCT blocks, and
document that they have a different meaning in lossless mode. (Most
of them aren't very meaningful in lossless mode anyhow.)
* Remove the new alloc_darray() method from jpeg_memory_mgr and
replace it with an internal macro that wraps the alloc_sarray()
method.
* Move the JDIFF* data types from jpeglib.h and jmorecfg.h into
jpegint.h.
* Remove the new 'codec' field from jpeg_compress_struct and
jpeg_decompress_struct and instead reuse the existing internal
coefficient control, forward/inverse DCT, and entropy
encoding/decoding structures for lossless compression/decompression.
* Repurpose existing error codes rather than introducing new ones.
(The new JERR_BAD_RESTART and JWRN_MUST_DOWNSCALE codes remain,
although JWRN_MUST_DOWNSCALE will probably be removed in
libjpeg-turbo, since we have a different way of handling multiple
data precisions.)
- Automatically enable lossless mode when a scan script with parameters
that are only valid for lossless mode is detected, and document the
use of scan scripts to generate lossless JPEG images.
- Move the sequential and shared Huffman routines back into jchuff.c and
jdhuff.c, and document that those routines are shared with jclhuff.c
and jdlhuff.c as well as with jcphuff.c and jdphuff.c.
- Move MAX_DIFF_BITS from jchuff.h into jclhuff.c, the only place where
it is used.
- Move the predictor and scaler code into jclossls.c and jdlossls.c.
- Streamline register usage in the [un]differencers (inspired by similar
optimizations in the color [de]converters.)
- Restructure the logic in a few places to reduce duplicated code.
- Ensure that all lossless-specific code is guarded by
C_LOSSLESS_SUPPORTED or D_LOSSLESS_SUPPORTED and that the library can
be built successfully if either or both of those macros is undefined.
- Remove all short forms of external names introduced by the lossless
JPEG patch. (These will not be needed by libjpeg-turbo, so there is
no use cleaning them up.)
- Various wordsmithing, formatting, and punctuation tweaks
- Eliminate various compiler warnings.
The Gordian knot that 7fec5074f9 attempted
to unravel was caused by the fact that there are several
data-precision-dependent (JSAMPLE-dependent) fields and methods in the
exposed libjpeg API structures, and if you change the exposed libjpeg
API structures, then you have to change the whole API. If you change
the whole API, then you have to provide a whole new library to support
the new API, and that makes it difficult to support multiple data
precisions in the same application. (It is not impossible, as example.c
demonstrated, but using data-precision-dependent libjpeg API structures
would have made the cjpeg, djpeg, and jpegtran source code hard to read,
so it made more sense to build, install, and package 12-bit-specific
versions of those applications.)
Unfortunately, the result of that initial integration effort was an
unreadable and unmaintainable mess, which is a problem for a library
that is an ISO/ITU-T reference implementation. Also, as I dug into the
problem of lossless JPEG support, I realized that 16-bit lossless JPEG
images are a thing, and supporting yet another version of the libjpeg
API just for those images is untenable.
In fact, however, the touch points for JSAMPLE in the exposed libjpeg
API structures are minimal:
- The colormap and sample_range_limit fields in jpeg_decompress_struct
- The alloc_sarray() and access_virt_sarray() methods in
jpeg_memory_mgr
- jpeg_write_scanlines() and jpeg_write_raw_data()
- jpeg_read_scanlines() and jpeg_read_raw_data()
- jpeg_skip_scanlines() and jpeg_crop_scanline()
(This is subtle, but both of those functions use JSAMPLE-dependent
opaque structures behind the scenes.)
It is much more readable and maintainable to provide 12-bit-specific
versions of those six top-level API functions and to document that the
aforementioned methods and fields must be type-cast when using 12-bit
samples. Since that eliminates the need to provide a 12-bit-specific
version of the exposed libjpeg API structures, we can:
- Compile only the precision-dependent libjpeg modules (the
coefficient buffer controllers, the colorspace converters, the
DCT/IDCT managers, the main buffer controllers, the preprocessing
and postprocessing controller, the downsampler and upsamplers, the
quantizers, the integer DCT methods, and the IDCT methods) for
multiple data precisions.
- Introduce 12-bit-specific methods into the various internal
structures defined in jpegint.h.
- Create precision-independent data type, macro, method, field, and
function names that are prefixed by an underscore, and use an
internal header to convert those into precision-dependent data
type, macro, method, field, and function names, based on the value
of BITS_IN_JSAMPLE, when compiling the precision-dependent libjpeg
modules.
- Expose precision-dependent jinit*() functions for each of the
precision-dependent libjpeg modules.
- Abstract the precision-dependent libjpeg modules by calling the
appropriate precision-dependent jinit*() function, based on the
value of cinfo->data_precision, from top-level libjpeg API
functions.
- UBSan complained that entropy->restarts_to_go was underflowing an
unsigned integer when it was decremented while
cinfo->restart_interval == 0. That was, of course, completely
innocuous behavior, since the result of the underflowing computation
was never used.
- d3a3a73f64 and
7bc9fca430 silenced a UBSan signed
integer overflow error, but unfortunately other malformed JPEG images
have been discovered that cause unsigned integer overflow in the same
computation. Since, to the best of our understanding, this behavior
is innocuous, this commit reverts the commits listed above, suppresses
the UBSan errors, and adds code comments to document the issue.
Regression introduced by 42825b68d5
The test case
https://user-images.githubusercontent.com/3491627/101376530-fde56180-38b0-11eb-938d-734119a5b5ba.jpg
is a malformed progressive JPEG image containing an interleaved Y/Cb/Cr
DC scan followed by two non-interleaved Y DC scans. Thus, the
prev_coef_bits[] array was initialized for the Y component but not the
other components, the uninitialized values for Cb and Cr were
transferred to the prev_coef_bits_latch[] array in smoothing_ok(), and
because cinfo->master->last_good_iMCU_row was 0,
decompress_smooth_data() read those uninitialized values when attempting
to smooth the second iMCU row.
Possibly fixes#478
This commit modifies the behavior of the block smoothing algorithm in
the libjpeg API library so that, if a scan in a multi-scan JPEG image is
incomplete (due to premature termination of the image stream), the block
smoothing parameters from the previous (complete) scan are used to
smooth any iMCU rows that the incomplete scan does not contain.
Closes#343
This macro is a relic of libjpeg's historic need to support a wide
variety of C compilers with varying degrees of compatibility. Such was
necessary during the open systems era, because C compilers were often
supplied by the system vendor. Prior to 1989, there was no C standard
per se, and even after ANSI C became a thing, there were still compilers
in use that didn't conform to it (libjpeg was first released in 1991.)
Realistically, only a handful of C compilers are in widespread use these
days, and all modern C compilers should support structure assignment.
- When referring to specific clauses, annexes, tables, and figures, a
"timed reference" (a reference that includes the year) must be used in
order to avoid confusion.
- "CCITT" = "ITU-T"
- Replace ambiguous "JPEG spec" with the specific document number.
Within the libjpeg API code, it seems to be more the convention than not
to separate the macro name and value by two or more spaces, which
improves general readability. Making this consistent across all of
libjpeg-turbo is less about my individual preferences and more about
making it easy to automatically detect variations from our chosen
formatting convention. I intend to release the script I'm using to
validate this stuff, once it matures and stabilizes a bit.
With rare exceptions ...
- Always separate line continuation characters by one space from
preceding code.
- Always use two-space indentation. Never use tabs.
- Always use K&R-style conditional blocks.
- Always surround operators with spaces, except in raw assembly code.
- Always put a space after, but not before, a comma.
- Never put a space between type casts and variables/function calls.
- Never put a space between the function name and the argument list in
function declarations and prototypes.
- Always surround braces ('{' and '}') with spaces.
- Always surround statements (if, for, else, catch, while, do, switch)
with spaces.
- Always attach pointer symbols ('*' and '**') to the variable or
function name.
- Always precede pointer symbols ('*' and '**') by a space in type
casts.
- Use the MIN() macro from jpegint.h within the libjpeg and TurboJPEG
API libraries (using min() from tjutil.h is still necessary for
TJBench.)
- Where it makes sense (particularly in the TurboJPEG code), put a blank
line after variable declaration blocks.
- Always separate statements in one-liners by two spaces.
The purpose of this was to ease maintenance on my part and also to make
it easier for contributors to figure out how to format patch
submissions. This was admittedly confusing (even to me sometimes) when
we had 3 or 4 different style conventions in the same source tree. The
new convention is more consistent with the formatting of other OSS code
bases.
This commit corrects deviations from the chosen formatting style in the
libjpeg API code and reformats the TurboJPEG API code such that it
conforms to the same standard.
NOTES:
- Although it is no longer necessary for the function name in function
declarations to begin in Column 1 (this was historically necessary
because of the ansi2knr utility, which allowed libjpeg to be built
with non-ANSI compilers), we retain that formatting for the libjpeg
code because it improves readability when using libjpeg's function
attribute macros (GLOBAL(), etc.)
- This reformatting project was accomplished with the help of AStyle and
Uncrustify, although neither was completely up to the task, and thus
a great deal of manual tweaking was required. Note to developers of
code formatting utilities: the libjpeg-turbo code base is an
excellent test bed, because AFAICT, it breaks every single one of the
utilities that are currently available.
- The legacy (MMX, SSE, 3DNow!) assembly code for i386 has been
formatted to match the SSE2 code (refer to
ff5685d5344273df321eb63a005eaae19d2496e3.) I hadn't intended to
bother with this, but the Loongson MMI implementation demonstrated
that there is still academic value to the MMX implementation, as an
algorithmic model for other 64-bit vector implementations. Thus, it
is desirable to improve its readability in the same manner as that of
the SSE2 implementation.
The convention used by libjpeg:
type * variable;
is not very common anymore, because it looks too much like
multiplication. Some (particularly C++ programmers) prefer to tuck the
pointer symbol against the type:
type* variable;
to emphasize that a pointer to a type is effectively a new type.
However, this can also be confusing, since defining multiple variables
on the same line would not work properly:
type* variable1, variable2; /* Only variable1 is actually a
pointer. */
This commit reformats the entirety of the libjpeg-turbo code base so
that it uses the same code formatting convention for pointers that the
TurboJPEG API code uses:
type *variable1, *variable2;
This seems to be the most common convention among C programmers, and
it is the convention used by other codec libraries, such as libpng and
libtiff.
The IJG README file has been renamed to README.ijg, in order to avoid
confusion (many people were assuming that that was our project's README
file and weren't reading README-turbo.txt) and to lay the groundwork for
markdown versions of the libjpeg-turbo README and build instructions.
Most of these involved left shifting a negative number, which is
technically undefined (although every modern compiler I'm aware of
will implement this by treating the signed integer as a 2's complement
unsigned integer-- the LEFT_SHIFT() macro just makes this behavior
explicit in order to shut up ubsan.) This also fixes a couple of
non-issues in the entropy codecs, whereby the sanitizer reported an
out-of-bounds index in the 4th argument of jpeg_make_d_derived_tbl().
In those cases, the index was actually out of bounds (caused by a
malformed JPEG image), but jpeg_make_d_derived_tbl() would have caught
the error and aborted prior to actually using the invalid address. Here
again, the fix was to make our intentions explicit so as to shut up
ubsan.
