ryan/mozjpeg
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

TurboJPEG: Numerous documentation improvements

Browse Source 
- Wordsmithing, formatting, and grammar tweaks

- Various clarifications and corrections, including specifying whether
  a particular buffer or image is used as a source or destination

- Accommodate/mention features that were introduced since the API
  documentation was created.

- For clarity, use "packed-pixel" to describe uncompressed
  source/destination images that are not planar YUV.

- Use "row" rather than "line" to refer to a single horizontal group of
  pixels or component values, for consistency with the libjpeg API
  documentation.  (libjpeg also uses "scanline", which is a more archaic
  term.)

- Use "alignment" rather than "padding" to refer to the number of bytes
  by which a row's width is evenly divisible.  This consistifies the
  documention of the YUV functions and tjLoadImage().  ("Padding"
  typically refers to the number of bytes added to each row, which is
  not the same thing.)

- Remove all references to "the underlying codec."  Although the
  TurboJPEG API originated as a cross-platform wrapper for the Intel
  Integrated Performance Primitives, Sun mediaLib, QuickTime, and
  libjpeg, none of those TurboJPEG implementations has been maintained
  since 2009.  Nothing would prevent someone from implementing the
  TurboJPEG API without libjpeg-turbo, but such an implementation would
  not necessarily have an "underlying codec."  (It could be fully
  self-contained.)

- Use "destination image" rather than "output image", for consistency,
  or describe the type of image that will be output.

- Avoid the term "image buffer" and instead use "byte buffer" to
  refer to buffers that will hold JPEG images, or describe the type of
  image that will be contained in the buffer.  (The Java documentation
  doesn't use "byte buffer", because the buffer arrays literally have
  "byte" in front of them, and since Java doesn't have pointers, it is
  not possible for mere mortals to store any other type of data in those
  arrays.)

- C: Use "unified" to describe YUV images stored in a single buffer, for
  consistency with the Java documentation.

- Use "planar YUV" rather than "YUV planar".  Is is our convention to
  describe images using {component layout} {colorspace/pixel format}
  {image function}, e.g. "packed-pixel RGB source image" or "planar YUV
  destination image."

- C: Document the TurboJPEG API version in which a particular function
  or macro was introduced, and reorder the backward compatibility
  function stubs in turbojpeg.h alphabetically by API version.

- C: Use Markdown rather than HTML tags, where possible, in the Doxygen
  comments.
This commit is contained in:
DRC
2023-01-06 10:29:10 -06:00
parent b03ee8b835
commit 9a146f0f23
31 changed files with 1845 additions and 1716 deletions
Download Patch File Download Diff File Expand all files Collapse all files

168
java/doc/org/libjpegturbo/turbojpeg/TJ.html
View File

@@ -156,36 +156,34 @@ extends java.lang.Object</pre>
<tr class="altColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#ERR_WARNING">ERR_WARNING</a></strong></code>
<div class="block">The error was non-fatal and recoverable, but the image may still be
corrupt.</div>
<div class="block">The error was non-fatal and recoverable, but the destination image may
still be corrupt.</div>
</td>
</tr>
<tr class="rowColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_ACCURATEDCT">FLAG_ACCURATEDCT</a></strong></code>
<div class="block">Use the most accurate DCT/IDCT algorithm available in the underlying
codec.</div>
<div class="block">Use the most accurate DCT/IDCT algorithm available.</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP">FLAG_BOTTOMUP</a></strong></code>
<div class="block">The uncompressed source/destination image is stored in bottom-up (Windows,
OpenGL) order, not top-down (X11) order.</div>
<div class="block">Rows in the packed-pixel source/destination image are stored in bottom-up
(Windows, OpenGL) order rather than in top-down (X11) order.</div>
</td>
</tr>
<tr class="rowColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_FASTDCT">FLAG_FASTDCT</a></strong></code>
<div class="block">Use the fastest DCT/IDCT algorithm available in the underlying codec.</div>
<div class="block">Use the fastest DCT/IDCT algorithm available.</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_FASTUPSAMPLE">FLAG_FASTUPSAMPLE</a></strong></code>
<div class="block">When decompressing an image that was compressed using chrominance
subsampling, use the fastest chrominance upsampling algorithm available in
the underlying codec.</div>
subsampling, use the fastest chrominance upsampling algorithm available.</div>
</td>
</tr>
<tr class="rowColor">
@@ -230,7 +228,7 @@ extends java.lang.Object</pre>
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_STOPONWARNING">FLAG_STOPONWARNING</a></strong></code>
<div class="block">Immediately discontinue the current compression/decompression/transform
operation if the underlying codec throws a warning (non-fatal error).</div>
operation if a warning (non-fatal error) occurs.</div>
</td>
</tr>
<tr class="altColor">
@@ -402,11 +400,12 @@ extends java.lang.Object</pre>
<tr class="altColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSizeYUV(int,%20int,%20int,%20int)">bufSizeYUV</a></strong>(int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</code>
<div class="block">Returns the size of the buffer (in bytes) required to hold a YUV planar
image with the given width, height, and level of chrominance subsampling.</div>
<div class="block">Returns the size of the buffer (in bytes) required to hold a unified
planar YUV image with the given width, height, and level of chrominance
subsampling.</div>
</td>
</tr>
<tr class="rowColor">
@@ -460,8 +459,8 @@ extends java.lang.Object</pre>
<tr class="altColor">
<td class="colFirst"><code>static <a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html" title="class in org.libjpegturbo.turbojpeg">TJScalingFactor</a>[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJ.html#getScalingFactors()">getScalingFactors</a></strong>()</code>
<div class="block">Returns a list of fractional scaling factors that the JPEG decompressor in
this implementation of TurboJPEG supports.</div>
<div class="block">Returns a list of fractional scaling factors that the JPEG decompressor
supports.</div>
</td>
</tr>
<tr class="rowColor">
@@ -778,8 +777,8 @@ extends java.lang.Object</pre>
vice versa, but the mapping is typically not 1:1 or reversible, nor can it
be defined with a simple formula. Thus, such a conversion is out of scope
for a codec library. However, the TurboJPEG API allows for compressing
CMYK pixels into a YCCK JPEG image (see <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#CS_YCCK"><code>CS_YCCK</code></a>) and
decompressing YCCK JPEG images into CMYK pixels.</div>
packed-pixel CMYK images into YCCK JPEG images (see <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#CS_YCCK"><code>CS_YCCK</code></a>) and
decompressing YCCK JPEG images into packed-pixel CMYK images.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.PF_CMYK">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -804,8 +803,9 @@ extends java.lang.Object</pre>
<div class="block">RGB colorspace. When compressing the JPEG image, the R, G, and B
components in the source image are reordered into image planes, but no
colorspace conversion or subsampling is performed. RGB JPEG images can be
decompressed to any of the extended RGB pixel formats or grayscale, but
they cannot be decompressed to YUV images.</div>
decompressed to packed-pixel images with any of the extended RGB or
grayscale pixel formats, but they cannot be decompressed to planar YUV
images.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.CS_RGB">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -826,10 +826,11 @@ extends java.lang.Object</pre>
transformation allowed the same signal to drive both black &amp; white and
color televisions, but JPEG images use YCbCr primarily because it allows
the color data to be optionally subsampled for the purposes of reducing
bandwidth or disk space. YCbCr is the most common JPEG colorspace, and
YCbCr JPEG images can be compressed from and decompressed to any of the
extended RGB pixel formats or grayscale, or they can be decompressed to
YUV planar images.</div>
network or disk usage. YCbCr is the most common JPEG colorspace, and
YCbCr JPEG images can be compressed from and decompressed to packed-pixel
images with any of the extended RGB or grayscale pixel formats. YCbCr
JPEG images can also be compressed from and decompressed to planar YUV
images.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.CS_YCbCr">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -842,9 +843,10 @@ extends java.lang.Object</pre>
<pre>public static final&nbsp;int CS_GRAY</pre>
<div class="block">Grayscale colorspace. The JPEG image retains only the luminance data (Y
component), and any color data from the source image is discarded.
Grayscale JPEG images can be compressed from and decompressed to any of
the extended RGB pixel formats or grayscale, or they can be decompressed
to YUV planar images.</div>
Grayscale JPEG images can be compressed from and decompressed to
packed-pixel images with any of the extended RGB or grayscale pixel
formats, or they can be compressed from and decompressed to planar YUV
images.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.CS_GRAY">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -858,7 +860,7 @@ extends java.lang.Object</pre>
<div class="block">CMYK colorspace. When compressing the JPEG image, the C, M, Y, and K
components in the source image are reordered into image planes, but no
colorspace conversion or subsampling is performed. CMYK JPEG images can
only be decompressed to CMYK pixels.</div>
only be decompressed to packed-pixel images with the CMYK pixel format.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.CS_CMYK">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -875,7 +877,7 @@ extends java.lang.Object</pre>
reversibly transformed into YCCK, and as with YCbCr, the chrominance
components in the YCCK pixels can be subsampled without incurring major
perceptual loss. YCCK JPEG images can only be compressed from and
decompressed to CMYK pixels.</div>
decompressed to packed-pixel images with the CMYK pixel format.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.CS_YCCK">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -886,8 +888,8 @@ extends java.lang.Object</pre>
<li class="blockList">
<h4>FLAG_BOTTOMUP</h4>
<pre>public static final&nbsp;int FLAG_BOTTOMUP</pre>
<div class="block">The uncompressed source/destination image is stored in bottom-up (Windows,
OpenGL) order, not top-down (X11) order.</div>
<div class="block">Rows in the packed-pixel source/destination image are stored in bottom-up
(Windows, OpenGL) order rather than in top-down (X11) order.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.FLAG_BOTTOMUP">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -947,10 +949,10 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<h4>FLAG_FASTUPSAMPLE</h4>
<pre>public static final&nbsp;int FLAG_FASTUPSAMPLE</pre>
<div class="block">When decompressing an image that was compressed using chrominance
subsampling, use the fastest chrominance upsampling algorithm available in
the underlying codec. The default is to use smooth upsampling, which
creates a smooth transition between neighboring chrominance components in
order to reduce upsampling artifacts in the decompressed image.</div>
subsampling, use the fastest chrominance upsampling algorithm available.
The default is to use smooth upsampling, which creates a smooth transition
between neighboring chrominance components in order to reduce upsampling
artifacts in the decompressed image.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.FLAG_FASTUPSAMPLE">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -961,12 +963,12 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<li class="blockList">
<h4>FLAG_FASTDCT</h4>
<pre>public static final&nbsp;int FLAG_FASTDCT</pre>
<div class="block">Use the fastest DCT/IDCT algorithm available in the underlying codec. The
default if this flag is not specified is implementation-specific. For
example, the implementation of TurboJPEG for libjpeg[-turbo] uses the fast
algorithm by default when compressing, because this has been shown to have
only a very slight effect on accuracy, but it uses the accurate algorithm
when decompressing, because this has been shown to have a larger effect.</div>
<div class="block">Use the fastest DCT/IDCT algorithm available. The default if this flag is
not specified is implementation-specific. For example, the implementation
of the TurboJPEG API in libjpeg-turbo uses the fast algorithm by default
when compressing, because this has been shown to have only a very slight
effect on accuracy, but it uses the accurate algorithm when decompressing,
because this has been shown to have a larger effect.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.FLAG_FASTDCT">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -977,13 +979,12 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<li class="blockList">
<h4>FLAG_ACCURATEDCT</h4>
<pre>public static final&nbsp;int FLAG_ACCURATEDCT</pre>
<div class="block">Use the most accurate DCT/IDCT algorithm available in the underlying
codec. The default if this flag is not specified is
implementation-specific. For example, the implementation of TurboJPEG for
libjpeg[-turbo] uses the fast algorithm by default when compressing,
because this has been shown to have only a very slight effect on accuracy,
but it uses the accurate algorithm when decompressing, because this has
been shown to have a larger effect.</div>
<div class="block">Use the most accurate DCT/IDCT algorithm available. The default if this
flag is not specified is implementation-specific. For example, the
implementation of the TurboJPEG API in libjpeg-turbo uses the fast
algorithm by default when compressing, because this has been shown to have
only a very slight effect on accuracy, but it uses the accurate algorithm
when decompressing, because this has been shown to have a larger effect.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.FLAG_ACCURATEDCT">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -995,14 +996,13 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<h4>FLAG_STOPONWARNING</h4>
<pre>public static final&nbsp;int FLAG_STOPONWARNING</pre>
<div class="block">Immediately discontinue the current compression/decompression/transform
operation if the underlying codec throws a warning (non-fatal error). The
default behavior is to allow the operation to complete unless a fatal
error is encountered.
operation if a warning (non-fatal error) occurs. The default behavior is
to allow the operation to complete unless a fatal error is encountered.
<p>
NOTE: due to the design of the TurboJPEG Java API, only certain methods
(specifically, <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg"><code>TJDecompressor.decompress*()</code></a> methods
with a void return type) will complete and leave the output image in a
fully recoverable state after a non-fatal error occurs.</div>
with a void return type) will complete and leave the destination image in
a fully recoverable state after a non-fatal error occurs.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.FLAG_STOPONWARNING">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -1055,13 +1055,13 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<li class="blockList">
<h4>ERR_WARNING</h4>
<pre>public static final&nbsp;int ERR_WARNING</pre>
<div class="block">The error was non-fatal and recoverable, but the image may still be
corrupt.
<div class="block">The error was non-fatal and recoverable, but the destination image may
still be corrupt.
<p>
NOTE: due to the design of the TurboJPEG Java API, only certain methods
(specifically, <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg"><code>TJDecompressor.decompress*()</code></a> methods
with a void return type) will complete and leave the output image in a
fully recoverable state after a non-fatal error occurs.</div>
with a void return type) will complete and leave the destination image in
a fully recoverable state after a non-fatal error occurs.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJ.ERR_WARNING">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -1094,7 +1094,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<div class="block">Returns the MCU block width for the given level of chrominance
subsampling.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>subsamp</code> - the level of chrominance subsampling (one of
<code>SAMP_*</code>)</dd>
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the MCU block width for the given level of chrominance
subsampling.</dd></dl>
</li>
@@ -1109,7 +1109,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<div class="block">Returns the MCU block height for the given level of chrominance
subsampling.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>subsamp</code> - the level of chrominance subsampling (one of
<code>SAMP_*</code>)</dd>
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the MCU block height for the given level of chrominance
subsampling.</dd></dl>
</li>
@@ -1122,7 +1122,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<h4>getPixelSize</h4>
<pre>public static&nbsp;int&nbsp;getPixelSize(int&nbsp;pixelFormat)</pre>
<div class="block">Returns the pixel size (in bytes) for the given pixel format.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <code>PF_*</code>)</dd>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>PF_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the pixel size (in bytes) for the given pixel format.</dd></dl>
</li>
</ul>
@@ -1138,7 +1138,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
of format <code>TJ.PF_BGRX</code> is stored in <code>char pixel[]</code>,
then the red component will be
<code>pixel[TJ.getRedOffset(TJ.PF_BGRX)]</code>.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <code>PF_*</code>)</dd>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>PF_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the red offset for the given pixel format, or -1 if the pixel
format does not have a red component.</dd></dl>
</li>
@@ -1155,7 +1155,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
of format <code>TJ.PF_BGRX</code> is stored in <code>char pixel[]</code>,
then the green component will be
<code>pixel[TJ.getGreenOffset(TJ.PF_BGRX)]</code>.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <code>PF_*</code>)</dd>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>PF_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the green offset for the given pixel format, or -1 if the pixel
format does not have a green component.</dd></dl>
</li>
@@ -1172,7 +1172,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
of format <code>TJ.PF_BGRX</code> is stored in <code>char pixel[]</code>,
then the blue component will be
<code>pixel[TJ.getBlueOffset(TJ.PF_BGRX)]</code>.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <code>PF_*</code>)</dd>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>PF_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the blue offset for the given pixel format, or -1 if the pixel
format does not have a blue component.</dd></dl>
</li>
@@ -1189,7 +1189,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
of format <code>TJ.PF_BGRA</code> is stored in <code>char pixel[]</code>,
then the alpha component will be
<code>pixel[TJ.getAlphaOffset(TJ.PF_BGRA)]</code>.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <code>PF_*</code>)</dd>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pixelFormat</code> - the pixel format (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>PF_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the alpha offset for the given pixel format, or -1 if the pixel
format does not have a alpha component.</dd></dl>
</li>
@@ -1206,7 +1206,7 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<div class="block">Returns the maximum size of the buffer (in bytes) required to hold a JPEG
image with the given width, height, and level of chrominance subsampling.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>width</code> - the width (in pixels) of the JPEG image</dd><dd><code>height</code> - the height (in pixels) of the JPEG image</dd><dd><code>jpegSubsamp</code> - the level of chrominance subsampling to be used when
generating the JPEG image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html" title="class in org.libjpegturbo.turbojpeg"><code>TJ.SAMP_*</code></a>)</dd>
generating the JPEG image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the maximum size of the buffer (in bytes) required to hold a JPEG
image with the given width, height, and level of chrominance subsampling.</dd></dl>
</li>
@@ -1218,16 +1218,20 @@ public static final&nbsp;int FLAG_FORCESSE3</pre>
<li class="blockList">
<h4>bufSizeYUV</h4>
<pre>public static&nbsp;int&nbsp;bufSizeYUV(int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</pre>
<div class="block">Returns the size of the buffer (in bytes) required to hold a YUV planar
image with the given width, height, and level of chrominance subsampling.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>width</code> - the width (in pixels) of the YUV image</dd><dd><code>pad</code> - the width of each line in each plane of the image is padded to
the nearest multiple of this number of bytes (must be a power of 2.)</dd><dd><code>height</code> - the height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html" title="class in org.libjpegturbo.turbojpeg"><code>TJ.SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the size of the buffer (in bytes) required to hold a YUV planar
image with the given width, height, and level of chrominance subsampling.</dd></dl>
<div class="block">Returns the size of the buffer (in bytes) required to hold a unified
planar YUV image with the given width, height, and level of chrominance
subsampling.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>width</code> - the width (in pixels) of the YUV image</dd><dd><code>align</code> - row alignment (in bytes) of the YUV image (must be a power of
2.) Setting this parameter to n specifies that each row in each plane of
the YUV image will be padded to the nearest multiple of n bytes
(1 = unpadded.)</dd><dd><code>height</code> - the height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the size of the buffer (in bytes) required to hold a unified
planar YUV image with the given width, height, and level of chrominance
subsampling.</dd></dl>
</li>
</ul>
<a name="bufSizeYUV(int, int, int)">
@@ -1258,11 +1262,11 @@ public static&nbsp;int&nbsp;bufSizeYUV(int&nbsp;width,
plane with the given parameters.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>componentID</code> - ID number of the image plane (0 = Y, 1 = U/Cb,
2 = V/Cr)</dd><dd><code>width</code> - width (in pixels) of the YUV image. NOTE: this is the width
of the whole image, not the plane width.</dd><dd><code>stride</code> - bytes per line in the image plane.</dd><dd><code>height</code> - height (in pixels) of the YUV image. NOTE: this is the
of the whole image, not the plane width.</dd><dd><code>stride</code> - bytes per row in the image plane.</dd><dd><code>height</code> - height (in pixels) of the YUV image. NOTE: this is the
height of the whole image, not the plane height.</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html" title="class in org.libjpegturbo.turbojpeg"><code>TJ.SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the size of the buffer (in bytes) required to hold a YUV planar
image with the given parameters.</dd></dl>
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the size of the buffer (in bytes) required to hold a YUV image
plane with the given parameters.</dd></dl>
</li>
</ul>
<a name="planeWidth(int, int, int)">
@@ -1278,7 +1282,7 @@ public static&nbsp;int&nbsp;bufSizeYUV(int&nbsp;width,
Refer to <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> for a description of plane width.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>componentID</code> - ID number of the image plane (0 = Y, 1 = U/Cb,
2 = V/Cr)</dd><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV image
(one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html" title="class in org.libjpegturbo.turbojpeg"><code>TJ.SAMP_*</code></a>)</dd>
(one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the plane width of a YUV image plane with the given parameters.</dd></dl>
</li>
</ul>
@@ -1295,7 +1299,7 @@ public static&nbsp;int&nbsp;bufSizeYUV(int&nbsp;width,
Refer to <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> for a description of plane height.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>componentID</code> - ID number of the image plane (0 = Y, 1 = U/Cb,
2 = V/Cr)</dd><dd><code>height</code> - height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV image
(one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html" title="class in org.libjpegturbo.turbojpeg"><code>TJ.SAMP_*</code></a>)</dd>
(one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the plane height of a YUV image plane with the given parameters.</dd></dl>
</li>
</ul>
@@ -1306,10 +1310,10 @@ public static&nbsp;int&nbsp;bufSizeYUV(int&nbsp;width,
<li class="blockList">
<h4>getScalingFactors</h4>
<pre>public static&nbsp;<a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html" title="class in org.libjpegturbo.turbojpeg">TJScalingFactor</a>[]&nbsp;getScalingFactors()</pre>
<div class="block">Returns a list of fractional scaling factors that the JPEG decompressor in
this implementation of TurboJPEG supports.</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>a list of fractional scaling factors that the JPEG decompressor in
this implementation of TurboJPEG supports.</dd></dl>
<div class="block">Returns a list of fractional scaling factors that the JPEG decompressor
supports.</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>a list of fractional scaling factors that the JPEG decompressor
supports.</dd></dl>
</li>
</ul>
</li>

165
java/doc/org/libjpegturbo/turbojpeg/TJCompressor.html
View File

@@ -132,7 +132,7 @@ implements java.io.Closeable</pre>
int&nbsp;y,
int&nbsp;width,
int&nbsp;height)</code>
<div class="block">Create a TurboJPEG compressor instance and associate the uncompressed
<div class="block">Create a TurboJPEG compressor instance and associate the packed-pixel
source image stored in <code>srcImage</code> with the newly created
instance.</div>
</td>
@@ -157,7 +157,7 @@ implements java.io.Closeable</pre>
int&nbsp;pitch,
int&nbsp;height,
int&nbsp;pixelFormat)</code>
<div class="block">Create a TurboJPEG compressor instance and associate the uncompressed
<div class="block">Create a TurboJPEG compressor instance and associate the packed-pixel
source image stored in <code>srcImage</code> with the newly created
instance.</div>
</td>
@@ -210,15 +210,16 @@ implements java.io.Closeable</pre>
<td class="colFirst"><code>void</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#compress(byte[],%20int)">compress</a></strong>(byte[]&nbsp;dstBuf,
int&nbsp;flags)</code>
<div class="block">Compress the uncompressed source image associated with this compressor
instance and output a JPEG image to the given destination buffer.</div>
<div class="block">Compress the packed-pixel or planar YUV source image associated with this
compressor instance and output a JPEG image to the given destination
buffer.</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code>byte[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#compress(int)">compress</a></strong>(int&nbsp;flags)</code>
<div class="block">Compress the uncompressed source image associated with this compressor
instance and return a buffer containing a JPEG image.</div>
<div class="block">Compress the packed-pixel or planar YUV source image associated with this
compressor instance and return a buffer containing a JPEG image.</div>
</td>
</tr>
<tr class="rowColor">
@@ -265,27 +266,27 @@ implements java.io.Closeable</pre>
<td class="colFirst"><code><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a></code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#encodeYUV(int[],%20int)">encodeYUV</a></strong>(int[]&nbsp;strides,
int&nbsp;flags)</code>
<div class="block">Encode the uncompressed source image associated with this compressor
<div class="block">Encode the packed-pixel source image associated with this compressor
instance into separate Y, U (Cb), and V (Cr) image planes and return a
<code>YUVImage</code> instance containing the encoded image planes.</div>
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the encoded image planes.</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a></code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#encodeYUV(int,%20int)">encodeYUV</a></strong>(int&nbsp;pad,
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#encodeYUV(int,%20int)">encodeYUV</a></strong>(int&nbsp;align,
int&nbsp;flags)</code>
<div class="block">Encode the uncompressed source image associated with this compressor
instance into a unified YUV planar image buffer and return a
<code>YUVImage</code> instance containing the encoded image.</div>
<div class="block">Encode the packed-pixel source image associated with this compressor
instance into a unified planar YUV image and return a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a>
instance containing the encoded image.</div>
</td>
</tr>
<tr class="rowColor">
<td class="colFirst"><code>void</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#encodeYUV(org.libjpegturbo.turbojpeg.YUVImage,%20int)">encodeYUV</a></strong>(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;dstImage,
int&nbsp;flags)</code>
<div class="block">Encode the uncompressed source image associated with this compressor
instance into a YUV planar image and store it in the given
<code>YUVImage</code> instance.</div>
<div class="block">Encode the packed-pixel source image associated with this compressor
instance into a planar YUV image and store it in the given
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance.</div>
</td>
</tr>
<tr class="altColor">
@@ -312,7 +313,7 @@ implements java.io.Closeable</pre>
int&nbsp;y,
int&nbsp;width,
int&nbsp;height)</code>
<div class="block">Associate an uncompressed RGB or grayscale source image with this
<div class="block">Associate a packed-pixel RGB or grayscale source image with this
compressor instance.</div>
</td>
</tr>
@@ -338,15 +339,14 @@ implements java.io.Closeable</pre>
int&nbsp;pitch,
int&nbsp;height,
int&nbsp;pixelFormat)</code>
<div class="block">Associate an uncompressed RGB, grayscale, or CMYK source image with this
<div class="block">Associate a packed-pixel RGB, grayscale, or CMYK source image with this
compressor instance.</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code>void</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#setSourceImage(org.libjpegturbo.turbojpeg.YUVImage)">setSourceImage</a></strong>(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;srcImage)</code>
<div class="block">Associate an uncompressed YUV planar source image with this compressor
instance.</div>
<div class="block">Associate a planar YUV source image with this compressor instance.</div>
</td>
</tr>
<tr class="rowColor">
@@ -405,7 +405,7 @@ implements java.io.Closeable</pre>
int&nbsp;height,
int&nbsp;pixelFormat)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Create a TurboJPEG compressor instance and associate the uncompressed
<div class="block">Create a TurboJPEG compressor instance and associate the packed-pixel
source image stored in <code>srcImage</code> with the newly created
instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - see <a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#setSourceImage(byte[],%20int,%20int,%20int,%20int,%20int,%20int)"><code>setSourceImage(byte[], int, int, int, int, int, int)</code></a> for description</dd><dd><code>x</code> - see <a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#setSourceImage(byte[],%20int,%20int,%20int,%20int,%20int,%20int)"><code>setSourceImage(byte[], int, int, int, int, int, int)</code></a> for description</dd><dd><code>y</code> - see <a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#setSourceImage(byte[],%20int,%20int,%20int,%20int,%20int,%20int)"><code>setSourceImage(byte[], int, int, int, int, int, int)</code></a> for description</dd><dd><code>width</code> - see <a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#setSourceImage(byte[],%20int,%20int,%20int,%20int,%20int,%20int)"><code>setSourceImage(byte[], int, int, int, int, int, int)</code></a> for description</dd><dd><code>pitch</code> - see <a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#setSourceImage(byte[],%20int,%20int,%20int,%20int,%20int,%20int)"><code>setSourceImage(byte[], int, int, int, int, int, int)</code></a> for description</dd><dd><code>height</code> - see <a href="../../../org/libjpegturbo/turbojpeg/TJCompressor.html#setSourceImage(byte[],%20int,%20int,%20int,%20int,%20int,%20int)"><code>setSourceImage(byte[], int, int, int, int, int, int)</code></a> for description</dd><dd><code>pixelFormat</code> - pixel format of the source image (one of
@@ -445,7 +445,7 @@ public&nbsp;TJCompressor(byte[]&nbsp;srcImage,
int&nbsp;width,
int&nbsp;height)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Create a TurboJPEG compressor instance and associate the uncompressed
<div class="block">Create a TurboJPEG compressor instance and associate the packed-pixel
source image stored in <code>srcImage</code> with the newly created
instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - see
@@ -480,19 +480,19 @@ public&nbsp;TJCompressor(byte[]&nbsp;srcImage,
int&nbsp;height,
int&nbsp;pixelFormat)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Associate an uncompressed RGB, grayscale, or CMYK source image with this
<div class="block">Associate a packed-pixel RGB, grayscale, or CMYK source image with this
compressor instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - image buffer containing RGB, grayscale, or CMYK pixels to
be compressed or encoded. This buffer is not modified.</dd><dd><code>x</code> - x offset (in pixels) of the region in the source image from which
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - buffer containing a packed-pixel RGB, grayscale, or CMYK
source image to be compressed or encoded. This buffer is not modified.</dd><dd><code>x</code> - x offset (in pixels) of the region in the source image from which
the JPEG or YUV image should be compressed/encoded</dd><dd><code>y</code> - y offset (in pixels) of the region in the source image from which
the JPEG or YUV image should be compressed/encoded</dd><dd><code>width</code> - width (in pixels) of the region in the source image from
which the JPEG or YUV image should be compressed/encoded</dd><dd><code>pitch</code> - bytes per line of the source image. Normally, this should be
<code>width * TJ.pixelSize(pixelFormat)</code> if the source image is
unpadded, but you can use this parameter to, for instance, specify that
the scanlines in the source image are padded to a 4-byte boundary or to
compress/encode a JPEG or YUV image from a region of a larger source
image. You can also be clever and use this parameter to skip lines, etc.
Setting this parameter to 0 is the equivalent of setting it to
which the JPEG or YUV image should be compressed/encoded</dd><dd><code>pitch</code> - bytes per row in the source image. Normally this should be
<code>width * TJ.pixelSize(pixelFormat)</code>, if the source image is
unpadded. However, you can use this parameter to, for instance, specify
that the rows in the source image are padded to the nearest multiple of 4
bytes or to compress/encode a JPEG or YUV image from a region of a larger
source image. You can also be clever and use this parameter to skip rows,
etc. Setting this parameter to 0 is the equivalent of setting it to
<code>width * TJ.pixelSize(pixelFormat)</code>.</dd><dd><code>height</code> - height (in pixels) of the region in the source image from
which the JPEG or YUV image should be compressed/encoded</dd><dd><code>pixelFormat</code> - pixel format of the source image (one of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>TJ.PF_*</code></a>)</dd>
@@ -531,10 +531,11 @@ public&nbsp;void&nbsp;setSourceImage(byte[]&nbsp;srcImage,
int&nbsp;width,
int&nbsp;height)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Associate an uncompressed RGB or grayscale source image with this
<div class="block">Associate a packed-pixel RGB or grayscale source image with this
compressor instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - a <code>BufferedImage</code> instance containing RGB or
grayscale pixels to be compressed or encoded. This image is not modified.</dd><dd><code>x</code> - x offset (in pixels) of the region in the source image from which
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - a <code>BufferedImage</code> instance containing a
packed-pixel RGB or grayscale source image to be compressed or encoded.
This image is not modified.</dd><dd><code>x</code> - x offset (in pixels) of the region in the source image from which
the JPEG or YUV image should be compressed/encoded</dd><dd><code>y</code> - y offset (in pixels) of the region in the source image from which
the JPEG or YUV image should be compressed/encoded</dd><dd><code>width</code> - width (in pixels) of the region in the source image from
which the JPEG or YUV image should be compressed/encoded (0 = use the
@@ -553,10 +554,9 @@ public&nbsp;void&nbsp;setSourceImage(byte[]&nbsp;srcImage,
<h4>setSourceImage</h4>
<pre>public&nbsp;void&nbsp;setSourceImage(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;srcImage)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Associate an uncompressed YUV planar source image with this compressor
instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - YUV planar image to be compressed. This image is not
modified.</dd>
<div class="block">Associate a planar YUV source image with this compressor instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - planar YUV source image to be compressed. This image is
not modified.</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -573,16 +573,16 @@ public&nbsp;void&nbsp;setSourceImage(byte[]&nbsp;srcImage,
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#CS_YCbCr"><code>TJ.CS_YCbCr</code></a>) or from CMYK to YCCK (see <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#CS_YCCK"><code>TJ.CS_YCCK</code></a>) as part
of the JPEG compression process, some of the Cb and Cr (chrominance)
components can be discarded or averaged together to produce a smaller
image with little perceptible loss of image clarity (the human eye is more
sensitive to small changes in brightness than to small changes in color.)
This is called "chrominance subsampling".
image with little perceptible loss of image clarity. (The human eye is
more sensitive to small changes in brightness than to small changes in
color.) This is called "chrominance subsampling".
<p>
NOTE: This method has no effect when compressing a JPEG image from a YUV
planar source. In that case, the level of chrominance subsampling in
the JPEG image is determined by the source. Furthermore, this method has
no effect when encoding to a pre-allocated <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance. In
that case, the level of chrominance subsampling is determined by the
destination.</div>
NOTE: This method has no effect when compressing a JPEG image from a
planar YUV source image. In that case, the level of chrominance
subsampling in the JPEG image is determined by the source image.
Furthermore, this method has no effect when encoding to a pre-allocated
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance. In that case, the level of chrominance
subsampling is determined by the destination image.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>newSubsamp</code> - the level of chrominance subsampling to use in
subsequent compress/encode oeprations (one of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd></dl>
@@ -609,8 +609,9 @@ public&nbsp;void&nbsp;setSourceImage(byte[]&nbsp;srcImage,
<pre>public&nbsp;void&nbsp;compress(byte[]&nbsp;dstBuf,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Compress the uncompressed source image associated with this compressor
instance and output a JPEG image to the given destination buffer.</div>
<div class="block">Compress the packed-pixel or planar YUV source image associated with this
compressor instance and output a JPEG image to the given destination
buffer.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstBuf</code> - buffer that will receive the JPEG image. Use
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSize(int,%20int,%20int)"><code>TJ.bufSize(int, int, int)</code></a> to determine the maximum size for this buffer based on
the source image's width and height and the desired level of chrominance
@@ -628,8 +629,8 @@ public&nbsp;void&nbsp;setSourceImage(byte[]&nbsp;srcImage,
<h4>compress</h4>
<pre>public&nbsp;byte[]&nbsp;compress(int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Compress the uncompressed source image associated with this compressor
instance and return a buffer containing a JPEG image.</div>
<div class="block">Compress the packed-pixel or planar YUV source image associated with this
compressor instance and return a buffer containing a JPEG image.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>a buffer containing a JPEG image. The length of this buffer will
@@ -682,13 +683,13 @@ public&nbsp;byte[]&nbsp;compress(java.awt.image.BufferedImage&nbsp;srcImage,
<pre>public&nbsp;void&nbsp;encodeYUV(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;dstImage,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Encode the uncompressed source image associated with this compressor
instance into a YUV planar image and store it in the given
<code>YUVImage</code> instance. This method uses the accelerated color
conversion routines in TurboJPEG's underlying codec but does not execute
any of the other steps in the JPEG compression process. Encoding
CMYK source images to YUV is not supported.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance that will receive the YUV planar
<div class="block">Encode the packed-pixel source image associated with this compressor
instance into a planar YUV image and store it in the given
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance. This method performs color conversion (which
is accelerated in the libjpeg-turbo implementation) but does not execute
any of the other steps in the JPEG compression process. Encoding CMYK
source images into YUV images is not supported.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance that will receive the planar YUV
image</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Throws:</span></dt>
@@ -716,20 +717,21 @@ public&nbsp;void&nbsp;encodeYUV(byte[]&nbsp;dstBuf,
<ul class="blockList">
<li class="blockList">
<h4>encodeYUV</h4>
<pre>public&nbsp;<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;encodeYUV(int&nbsp;pad,
<pre>public&nbsp;<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;encodeYUV(int&nbsp;align,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Encode the uncompressed source image associated with this compressor
instance into a unified YUV planar image buffer and return a
<code>YUVImage</code> instance containing the encoded image. This method
uses the accelerated color conversion routines in TurboJPEG's underlying
codec but does not execute any of the other steps in the JPEG compression
process. Encoding CMYK source images to YUV is not supported.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>pad</code> - the width of each line in each plane of the YUV image will be
padded to the nearest multiple of this number of bytes (must be a power of
2.)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<div class="block">Encode the packed-pixel source image associated with this compressor
instance into a unified planar YUV image and return a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a>
instance containing the encoded image. This method performs color
conversion (which is accelerated in the libjpeg-turbo implementation) but
does not execute any of the other steps in the JPEG compression process.
Encoding CMYK source images into YUV images is not supported.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>align</code> - row alignment (in bytes) of the YUV image (must be a power of
2.) Setting this parameter to n will cause each row in each plane of the
YUV image to be padded to the nearest multiple of n bytes (1 = unpadded.)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>a YUV planar image.</dd>
<dt><span class="strong">Returns:</span></dt><dd>a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the unified planar YUV
encoded image</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -743,21 +745,22 @@ public&nbsp;void&nbsp;encodeYUV(byte[]&nbsp;dstBuf,
<pre>public&nbsp;<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;encodeYUV(int[]&nbsp;strides,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Encode the uncompressed source image associated with this compressor
<div class="block">Encode the packed-pixel source image associated with this compressor
instance into separate Y, U (Cb), and V (Cr) image planes and return a
<code>YUVImage</code> instance containing the encoded image planes. This
method uses the accelerated color conversion routines in TurboJPEG's
underlying codec but does not execute any of the other steps in the JPEG
compression process. Encoding CMYK source images to YUV is not supported.</div>
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the encoded image planes. This
method performs color conversion (which is accelerated in the
libjpeg-turbo implementation) but does not execute any of the other steps
in the JPEG compression process. Encoding CMYK source images into YUV
images is not supported.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>strides</code> - an array of integers, each specifying the number of bytes
per line in the corresponding plane of the output image. Setting the
stride for any plane to 0 is the same as setting it to the component width
of the plane. If <code>strides</code> is null, then the strides for all
planes will be set to their respective component widths. You can adjust
the strides in order to add an arbitrary amount of line padding to each
plane.</dd><dd><code>flags</code> - the bitwise OR of one or more of
per row in the corresponding plane of the YUV source image. Setting the
stride for any plane to 0 is the same as setting it to the plane width
(see <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a>.) If <code>strides</code> is null, then the strides
for all planes will be set to their respective plane widths. You can
adjust the strides in order to add an arbitrary amount of row padding to
each plane.</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>a YUV planar image.</dd>
<dt><span class="strong">Returns:</span></dt><dd>a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the encoded image planes</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>

2
java/doc/org/libjpegturbo/turbojpeg/TJCustomFilter.html
View File

@@ -163,7 +163,7 @@
into multiple DCT coefficient buffers and call the callback function once
for each buffer.</dd><dd><code>planeRegion</code> - rectangle containing the width and height of the
component plane to which <code>coeffBuffer</code> belongs</dd><dd><code>componentID</code> - ID number of the component plane to which
<code>coeffBuffer</code> belongs (Y, Cb, and Cr have, respectively, ID's
<code>coeffBuffer</code> belongs. (Y, Cb, and Cr have, respectively, ID's
of 0, 1, and 2 in typical JPEG images.)</dd><dd><code>transformID</code> - ID number of the transformed image to which
<code>coeffBuffer</code> belongs. This is the same as the index of the
transform in the <code>transforms</code> array that was passed to <a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#transform(byte[][],%20org.libjpegturbo.turbojpeg.TJTransform[],%20int)"><code>TJTransformer.transform()</code></a>.</dd><dd><code>transform</code> - a <a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg"><code>TJTransform</code></a> instance that specifies the

332
java/doc/org/libjpegturbo/turbojpeg/TJDecompressor.html
View File

@@ -180,20 +180,22 @@ implements java.io.Closeable</pre>
<tr class="rowColor">
<td class="colOne"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#TJDecompressor(byte[])">TJDecompressor</a></strong>(byte[]&nbsp;jpegImage)</code>
<div class="block">Create a TurboJPEG decompressor instance and associate the JPEG source
image stored in <code>jpegImage</code> with the newly created instance.</div>
image or "abbreviated table specification" (AKA "tables-only") datastream
stored in <code>jpegImage</code> with the newly created instance.</div>
</td>
</tr>
<tr class="altColor">
<td class="colOne"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#TJDecompressor(byte[],%20int)">TJDecompressor</a></strong>(byte[]&nbsp;jpegImage,
int&nbsp;imageSize)</code>
<div class="block">Create a TurboJPEG decompressor instance and associate the JPEG source
image of length <code>imageSize</code> bytes stored in
<code>jpegImage</code> with the newly created instance.</div>
image or "abbreviated table specification" (AKA "tables-only") datastream
of length <code>imageSize</code> bytes stored in <code>jpegImage</code>
with the newly created instance.</div>
</td>
</tr>
<tr class="rowColor">
<td class="colOne"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#TJDecompressor(org.libjpegturbo.turbojpeg.YUVImage)">TJDecompressor</a></strong>(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;yuvImage)</code>
<div class="block">Create a TurboJPEG decompressor instance and associate the YUV planar
<div class="block">Create a TurboJPEG decompressor instance and associate the planar YUV
source image stored in <code>yuvImage</code> with the newly created
instance.</div>
</td>
@@ -223,9 +225,10 @@ implements java.io.Closeable</pre>
<td class="colFirst"><code>void</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#decompress(java.awt.image.BufferedImage,%20int)">decompress</a></strong>(java.awt.image.BufferedImage&nbsp;dstImage,
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and output a decompressed/decoded image to
the given <code>BufferedImage</code> instance.</div>
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and output a packed-pixel
decompressed/decoded image to the given <code>BufferedImage</code>
instance.</div>
</td>
</tr>
<tr class="altColor">
@@ -252,9 +255,9 @@ implements java.io.Closeable</pre>
int&nbsp;desiredHeight,
int&nbsp;pixelFormat,
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and output a grayscale, RGB, or CMYK image
to the given destination buffer.</div>
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and output a packed-pixel
grayscale, RGB, or CMYK image to the given destination buffer.</div>
</td>
</tr>
<tr class="altColor">
@@ -267,9 +270,9 @@ implements java.io.Closeable</pre>
int&nbsp;desiredHeight,
int&nbsp;pixelFormat,
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and output a grayscale, RGB, or CMYK image
to the given destination buffer.</div>
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and output a packed-pixel
grayscale, RGB, or CMYK image to the given destination buffer.</div>
</td>
</tr>
<tr class="rowColor">
@@ -280,7 +283,7 @@ implements java.io.Closeable</pre>
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and return a <code>BufferedImage</code>
instance containing the decompressed/decoded image.</div>
instance containing the packed-pixel decompressed/decoded image.</div>
</td>
</tr>
<tr class="altColor">
@@ -290,8 +293,9 @@ implements java.io.Closeable</pre>
int&nbsp;desiredHeight,
int&nbsp;pixelFormat,
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance and return a buffer containing the decompressed image.</div>
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and return a buffer containing
the packed-pixel decompressed image.</div>
</td>
</tr>
<tr class="rowColor">
@@ -319,18 +323,18 @@ implements java.io.Closeable</pre>
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance into a set of Y, U (Cb), and V (Cr) image planes and return a
<code>YUVImage</code> instance containing the decompressed image planes.</div>
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the decompressed image planes.</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a></code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#decompressToYUV(int,%20int,%20int,%20int)">decompressToYUV</a></strong>(int&nbsp;desiredWidth,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;desiredHeight,
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance into a unified YUV planar image buffer and return a
<code>YUVImage</code> instance containing the decompressed image.</div>
instance into a unified planar YUV image and return a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a>
instance containing the decompressed image.</div>
</td>
</tr>
<tr class="rowColor">
@@ -338,8 +342,8 @@ implements java.io.Closeable</pre>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#decompressToYUV(org.libjpegturbo.turbojpeg.YUVImage,%20int)">decompressToYUV</a></strong>(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;dstImage,
int&nbsp;flags)</code>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance into a YUV planar image and store it in the given
<code>YUVImage</code> instance.</div>
instance into a planar YUV image and store it in the given
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance.</div>
</td>
</tr>
<tr class="altColor">
@@ -363,7 +367,7 @@ implements java.io.Closeable</pre>
<tr class="rowColor">
<td class="colFirst"><code>byte[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getJPEGBuf()">getJPEGBuf</a></strong>()</code>
<div class="block">Returns the JPEG image buffer associated with this decompressor instance.</div>
<div class="block">Returns the JPEG buffer associated with this decompressor instance.</div>
</td>
</tr>
<tr class="altColor">
@@ -426,7 +430,7 @@ implements java.io.Closeable</pre>
<tr class="rowColor">
<td class="colFirst"><code>void</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#setSourceImage(org.libjpegturbo.turbojpeg.YUVImage)">setSourceImage</a></strong>(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;srcImage)</code>
<div class="block">Associate the specified YUV planar source image with this decompressor
<div class="block">Associate the specified planar YUV source image with this decompressor
instance.</div>
</td>
</tr>
@@ -554,9 +558,11 @@ implements java.io.Closeable</pre>
<pre>public&nbsp;TJDecompressor(byte[]&nbsp;jpegImage)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Create a TurboJPEG decompressor instance and associate the JPEG source
image stored in <code>jpegImage</code> with the newly created instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - JPEG image buffer (size of the JPEG image is assumed to
be the length of the array.) This buffer is not modified.</dd>
image or "abbreviated table specification" (AKA "tables-only") datastream
stored in <code>jpegImage</code> with the newly created instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - buffer containing a JPEG source image or tables-only
datastream. (The size of the JPEG image or datastream is assumed to be
the length of the array.) This buffer is not modified.</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -571,9 +577,12 @@ implements java.io.Closeable</pre>
int&nbsp;imageSize)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Create a TurboJPEG decompressor instance and associate the JPEG source
image of length <code>imageSize</code> bytes stored in
<code>jpegImage</code> with the newly created instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - JPEG image buffer. This buffer is not modified.</dd><dd><code>imageSize</code> - size of the JPEG image (in bytes)</dd>
image or "abbreviated table specification" (AKA "tables-only") datastream
of length <code>imageSize</code> bytes stored in <code>jpegImage</code>
with the newly created instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - buffer containing a JPEG source image or tables-only
datastream. This buffer is not modified.</dd><dd><code>imageSize</code> - size of the JPEG source image or tables-only datastream
(in bytes)</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -586,10 +595,10 @@ implements java.io.Closeable</pre>
<h4>TJDecompressor</h4>
<pre>public&nbsp;TJDecompressor(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;yuvImage)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Create a TurboJPEG decompressor instance and associate the YUV planar
<div class="block">Create a TurboJPEG decompressor instance and associate the planar YUV
source image stored in <code>yuvImage</code> with the newly created
instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>yuvImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing a YUV planar
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>yuvImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing a planar YUV source
image to be decoded. This image is not modified.</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
@@ -622,9 +631,9 @@ implements java.io.Closeable</pre>
subsequent "abbreviated image" datastreams. This is useful, for instance,
when decompressing video streams in which all frames share the same
quantization and Huffman tables.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - buffer containing a JPEG image or an "abbreviated table
specification" (AKA "tables-only") datastream. This buffer is not
modified.</dd><dd><code>imageSize</code> - size of the JPEG image (in bytes)</dd>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - buffer containing a JPEG source image or tables-only
datastream. This buffer is not modified.</dd><dd><code>imageSize</code> - size of the JPEG source image or tables-only datastream
(in bytes)</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -651,11 +660,11 @@ public&nbsp;void&nbsp;setJPEGImage(byte[]&nbsp;jpegImage,
<li class="blockList">
<h4>setSourceImage</h4>
<pre>public&nbsp;void&nbsp;setSourceImage(<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;srcImage)</pre>
<div class="block">Associate the specified YUV planar source image with this decompressor
instance. Subsequent decompress operations will decode this image into an
RGB or grayscale destination image.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing a YUV planar image to
be decoded. This image is not modified.</dd></dl>
<div class="block">Associate the specified planar YUV source image with this decompressor
instance. Subsequent decompress operations will decode this image into a
packed-pixel RGB or grayscale destination image.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>srcImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing a planar YUV source
image to be decoded. This image is not modified.</dd></dl>
</li>
</ul>
<a name="getWidth()">
@@ -719,8 +728,8 @@ public&nbsp;void&nbsp;setJPEGImage(byte[]&nbsp;jpegImage,
<li class="blockList">
<h4>getJPEGBuf</h4>
<pre>public&nbsp;byte[]&nbsp;getJPEGBuf()</pre>
<div class="block">Returns the JPEG image buffer associated with this decompressor instance.</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the JPEG image buffer associated with this decompressor instance.</dd></dl>
<div class="block">Returns the JPEG buffer associated with this decompressor instance.</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the JPEG buffer associated with this decompressor instance.</dd></dl>
</li>
</ul>
<a name="getJPEGSize()">
@@ -748,12 +757,12 @@ public&nbsp;void&nbsp;setJPEGImage(byte[]&nbsp;jpegImage,
decompressor can generate without exceeding the desired image width and
height.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>desiredWidth</code> - desired width (in pixels) of the decompressed image.
Setting this to 0 is the same as setting it to the width of the JPEG image
(in other words, the width will not be considered when determining the
scaled image size.)</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the decompressed image.
Setting this to 0 is the same as setting it to the width of the JPEG
image. (In other words, the width will not be considered when determining
the scaled image size.)</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the decompressed image.
Setting this to 0 is the same as setting it to the height of the JPEG
image (in other words, the height will not be considered when determining
the scaled image size.)</dd>
image. (In other words, the height will not be considered when
determining the scaled image size.)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the width of the largest scaled-down image that the TurboJPEG
decompressor can generate without exceeding the desired image width and
height.</dd></dl>
@@ -771,12 +780,12 @@ public&nbsp;void&nbsp;setJPEGImage(byte[]&nbsp;jpegImage,
decompressor can generate without exceeding the desired image width and
height.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>desiredWidth</code> - desired width (in pixels) of the decompressed image.
Setting this to 0 is the same as setting it to the width of the JPEG image
(in other words, the width will not be considered when determining the
scaled image size.)</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the decompressed image.
Setting this to 0 is the same as setting it to the width of the JPEG
image. (In other words, the width will not be considered when determining
the scaled image size.)</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the decompressed image.
Setting this to 0 is the same as setting it to the height of the JPEG
image (in other words, the height will not be considered when determining
the scaled image size.)</dd>
image. (In other words, the height will not be considered when
determining the scaled image size.)</dd>
<dt><span class="strong">Returns:</span></dt><dd>the height of the largest scaled-down image that the TurboJPEG
decompressor can generate without exceeding the desired image width and
height.</dd></dl>
@@ -797,25 +806,26 @@ public&nbsp;void&nbsp;setJPEGImage(byte[]&nbsp;jpegImage,
int&nbsp;pixelFormat,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and output a grayscale, RGB, or CMYK image
to the given destination buffer.
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and output a packed-pixel
grayscale, RGB, or CMYK image to the given destination buffer.
<p>
NOTE: The output image is fully recoverable if this method throws a
NOTE: The destination image is fully recoverable if this method throws a
non-fatal <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg"><code>TJException</code></a> (unless
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_STOPONWARNING"><code>TJ.FLAG_STOPONWARNING</code></a> is specified.)</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstBuf</code> - buffer that will receive the decompressed/decoded image.
If the source image is a JPEG image, then this buffer should normally be
<code>pitch * scaledHeight</code> bytes in size, where
<code>scaledHeight</code> can be determined by calling <code>
scalingFactor.<a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a>(jpegHeight)
</code> with one of the scaling factors returned from <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#getScalingFactors()"><code>TJ.getScalingFactors()</code></a> or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledHeight(int,%20int)"><code>getScaledHeight(int, int)</code></a>. If the
source image is a YUV image, then this buffer should normally be
<code>pitch * height</code> bytes in size, where <code>height</code> is
the height of the YUV image. However, the buffer may also be larger than
the dimensions of the source image, in which case the <code>x</code>,
<code>y</code>, and <code>pitch</code> parameters can be used to specify
the region into which the source image should be decompressed/decoded.</dd><dd><code>x</code> - x offset (in pixels) of the region in the destination image into
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstBuf</code> - buffer that will receive the packed-pixel
decompressed/decoded image. If the source image is a JPEG image, then
this buffer should normally be <code>pitch * scaledHeight</code> bytes in
size, where <code>scaledHeight</code> can be determined by calling
<code>scalingFactor.</code><a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a><code>(jpegHeight)</code>
with one of the scaling factors returned from <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#getScalingFactors()"><code>TJ.getScalingFactors()</code></a>
or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledHeight(int,%20int)"><code>getScaledHeight(int, int)</code></a>. If the source image is a YUV
image, then this buffer should normally be <code>pitch * height</code>
bytes in size, where <code>height</code> is the height of the YUV image.
However, the buffer may also be larger than the dimensions of the source
image, in which case the <code>x</code>, <code>y</code>, and
<code>pitch</code> parameters can be used to specify the region into which
the source image should be decompressed/decoded.</dd><dd><code>x</code> - x offset (in pixels) of the region in the destination image into
which the source image should be decompressed/decoded</dd><dd><code>y</code> - y offset (in pixels) of the region in the destination image into
which the source image should be decompressed/decoded</dd><dd><code>desiredWidth</code> - If the source image is a JPEG image, then this
specifies the desired width (in pixels) of the decompressed image (or
@@ -823,18 +833,18 @@ public&nbsp;void&nbsp;setJPEGImage(byte[]&nbsp;jpegImage,
than the source image dimensions, then TurboJPEG will use scaling in the
JPEG decompressor to generate the largest possible image that will fit
within the desired dimensions. Setting this to 0 is the same as setting
it to the width of the JPEG image (in other words, the width will not be
it to the width of the JPEG image. (In other words, the width will not be
considered when determining the scaled image size.) This parameter is
ignored if the source image is a YUV image.</dd><dd><code>pitch</code> - bytes per line of the destination image. Normally, this
should be set to <code>scaledWidth * TJ.pixelSize(pixelFormat)</code> if
the destination image is unpadded, but you can use this to, for instance,
pad each line of the destination image to a 4-byte boundary or to
decompress/decode the source image into a region of a larger image. NOTE:
if the source image is a JPEG image, then <code>scaledWidth</code> can be
determined by calling <code>
scalingFactor.<a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a>(jpegWidth)
</code> or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledWidth(int,%20int)"><code>getScaledWidth(int, int)</code></a>. If the source image is a
YUV image, then <code>scaledWidth</code> is the width of the YUV image.
ignored if the source image is a YUV image.</dd><dd><code>pitch</code> - bytes per row in the destination image. Normally this should
be set to <code>scaledWidth * TJ.pixelSize(pixelFormat)</code>, if the
destination image will be unpadded. However, you can use this to, for
instance, pad each row of the destination image to the nearest multiple of
4 bytes or to decompress/decode the source image into a region of a larger
image. NOTE: if the source image is a JPEG image, then
<code>scaledWidth</code> can be determined by calling
<code>scalingFactor.</code><a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a><code>(jpegWidth)</code>
or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledWidth(int,%20int)"><code>getScaledWidth(int, int)</code></a>. If the source image is a YUV
image, then <code>scaledWidth</code> is the width of the YUV image.
Setting this parameter to 0 is the equivalent of setting it to
<code>scaledWidth * TJ.pixelSize(pixelFormat)</code>.</dd><dd><code>desiredHeight</code> - If the source image is a JPEG image, then this
specifies the desired height (in pixels) of the decompressed image (or
@@ -842,8 +852,8 @@ public&nbsp;void&nbsp;setJPEGImage(byte[]&nbsp;jpegImage,
than the source image dimensions, then TurboJPEG will use scaling in the
JPEG decompressor to generate the largest possible image that will fit
within the desired dimensions. Setting this to 0 is the same as setting
it to the height of the JPEG image (in other words, the height will not be
considered when determining the scaled image size.) This parameter is
it to the height of the JPEG image. (In other words, the height will not
be considered when determining the scaled image size.) This parameter is
ignored if the source image is a YUV image.</dd><dd><code>pixelFormat</code> - pixel format of the decompressed/decoded image (one of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>TJ.PF_*</code></a>)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
@@ -883,8 +893,9 @@ public&nbsp;void&nbsp;decompress(byte[]&nbsp;dstBuf,
int&nbsp;pixelFormat,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance and return a buffer containing the decompressed image.</div>
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and return a buffer containing
the packed-pixel decompressed image.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>desiredWidth</code> - see
<a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#decompress(byte[],%20int,%20int,%20int,%20int,%20int,%20int,%20int)"><code>decompress(byte[], int, int, int, int, int, int, int)</code></a>
for description</dd><dd><code>pitch</code> - see
@@ -894,7 +905,7 @@ public&nbsp;void&nbsp;decompress(byte[]&nbsp;dstBuf,
for description</dd><dd><code>pixelFormat</code> - pixel format of the decompressed image (one of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>TJ.PF_*</code></a>)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>a buffer containing the decompressed image.</dd>
<dt><span class="strong">Returns:</span></dt><dd>a buffer containing the packed-pixel decompressed image.</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -909,21 +920,21 @@ public&nbsp;void&nbsp;decompress(byte[]&nbsp;dstBuf,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance into a YUV planar image and store it in the given
<code>YUVImage</code> instance. This method performs JPEG decompression
but leaves out the color conversion step, so a planar YUV image is
generated instead of an RGB or grayscale image. This method cannot be
used to decompress JPEG source images with the CMYK or YCCK colorspace.
instance into a planar YUV image and store it in the given
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance. This method performs JPEG decompression but
leaves out the color conversion step, so a planar YUV image is generated
instead of a packed-pixel image. This method cannot be used to decompress
JPEG source images with the CMYK or YCCK colorspace.
<p>
NOTE: The YUV planar output image is fully recoverable if this method
NOTE: The planar YUV destination image is fully recoverable if this method
throws a non-fatal <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg"><code>TJException</code></a> (unless
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_STOPONWARNING"><code>TJ.FLAG_STOPONWARNING</code></a> is specified.)</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance that will receive the YUV planar
image. The level of subsampling specified in this <code>YUVImage</code>
instance must match that of the JPEG image, and the width and height
specified in the <code>YUVImage</code> instance must match one of the
scaled image sizes that TurboJPEG is capable of generating from the JPEG
source image.</dd><dd><code>flags</code> - the bitwise OR of one or more of
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstImage</code> - <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance that will receive the planar YUV
decompressed image. The level of subsampling specified in this
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance must match that of the JPEG image, and the width
and height specified in the <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance must match one of
the scaled image sizes that the decompressor is capable of generating from
the JPEG source image.</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
@@ -957,32 +968,33 @@ public&nbsp;void&nbsp;decompressToYUV(byte[]&nbsp;dstBuf,
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance into a set of Y, U (Cb), and V (Cr) image planes and return a
<code>YUVImage</code> instance containing the decompressed image planes.
This method performs JPEG decompression but leaves out the color
conversion step, so a planar YUV image is generated instead of an RGB or
grayscale image. This method cannot be used to decompress JPEG source
images with the CMYK or YCCK colorspace.</div>
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the decompressed image planes. This
method performs JPEG decompression but leaves out the color conversion
step, so a planar YUV image is generated instead of a packed-pixel image.
This method cannot be used to decompress JPEG source images with the CMYK
or YCCK colorspace.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>desiredWidth</code> - desired width (in pixels) of the YUV image. If the
desired image dimensions are different than the dimensions of the JPEG
image being decompressed, then TurboJPEG will use scaling in the JPEG
decompressor to generate the largest possible image that will fit within
the desired dimensions. Setting this to 0 is the same as setting it to
the width of the JPEG image (in other words, the width will not be
the width of the JPEG image. (In other words, the width will not be
considered when determining the scaled image size.)</dd><dd><code>strides</code> - an array of integers, each specifying the number of bytes
per line in the corresponding plane of the output image. Setting the
stride for any plane to 0 is the same as setting it to the scaled
component width of the plane. If <tt>strides</tt> is NULL, then the
strides for all planes will be set to their respective scaled component
widths. You can adjust the strides in order to add an arbitrary amount of
line padding to each plane.</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the YUV image. If the
per row in the corresponding plane of the YUV image. Setting the stride
for any plane to 0 is the same as setting it to the scaled plane width
(see <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a>.) If <code>strides</code> is null, then the strides
for all planes will be set to their respective scaled plane widths. You
can adjust the strides in order to add an arbitrary amount of row padding
to each plane.</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the YUV image. If the
desired image dimensions are different than the dimensions of the JPEG
image being decompressed, then TurboJPEG will use scaling in the JPEG
decompressor to generate the largest possible image that will fit within
the desired dimensions. Setting this to 0 is the same as setting it to
the height of the JPEG image (in other words, the height will not be
the height of the JPEG image. (In other words, the height will not be
considered when determining the scaled image size.)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>a YUV planar image.</dd>
<dt><span class="strong">Returns:</span></dt><dd>a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the decompressed image
planes</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -994,34 +1006,34 @@ public&nbsp;void&nbsp;decompressToYUV(byte[]&nbsp;dstBuf,
<li class="blockList">
<h4>decompressToYUV</h4>
<pre>public&nbsp;<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a>&nbsp;decompressToYUV(int&nbsp;desiredWidth,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;desiredHeight,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image associated with this decompressor
instance into a unified YUV planar image buffer and return a
<code>YUVImage</code> instance containing the decompressed image. This
method performs JPEG decompression but leaves out the color conversion
step, so a planar YUV image is generated instead of an RGB or grayscale
image. This method cannot be used to decompress JPEG source images with
the CMYK or YCCK colorspace.</div>
instance into a unified planar YUV image and return a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a>
instance containing the decompressed image. This method performs JPEG
decompression but leaves out the color conversion step, so a planar YUV
image is generated instead of a packed-pixel image. This method cannot be
used to decompress JPEG source images with the CMYK or YCCK colorspace.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>desiredWidth</code> - desired width (in pixels) of the YUV image. If the
desired image dimensions are different than the dimensions of the JPEG
image being decompressed, then TurboJPEG will use scaling in the JPEG
decompressor to generate the largest possible image that will fit within
the desired dimensions. Setting this to 0 is the same as setting it to
the width of the JPEG image (in other words, the width will not be
considered when determining the scaled image size.)</dd><dd><code>pad</code> - the width of each line in each plane of the YUV image will be
padded to the nearest multiple of this number of bytes (must be a power of
2.)</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the YUV image. If the
the width of the JPEG image. (In other words, the width will not be
considered when determining the scaled image size.)</dd><dd><code>align</code> - row alignment (in bytes) of the YUV image (must be a power of
2.) Setting this parameter to n will cause each row in each plane of the
YUV image to be padded to the nearest multiple of n bytes (1 = unpadded.)</dd><dd><code>desiredHeight</code> - desired height (in pixels) of the YUV image. If the
desired image dimensions are different than the dimensions of the JPEG
image being decompressed, then TurboJPEG will use scaling in the JPEG
decompressor to generate the largest possible image that will fit within
the desired dimensions. Setting this to 0 is the same as setting it to
the height of the JPEG image (in other words, the height will not be
the height of the JPEG image. (In other words, the height will not be
considered when determining the scaled image size.)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>a YUV planar image.</dd>
<dt><span class="strong">Returns:</span></dt><dd>a <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>YUVImage</code></a> instance containing the unified planar YUV
decompressed image</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -1055,25 +1067,26 @@ public&nbsp;byte[]&nbsp;decompressToYUV(int&nbsp;flags)
int&nbsp;pixelFormat,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and output a grayscale, RGB, or CMYK image
to the given destination buffer.
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and output a packed-pixel
grayscale, RGB, or CMYK image to the given destination buffer.
<p>
NOTE: The output image is fully recoverable if this method throws a
NOTE: The destination image is fully recoverable if this method throws a
non-fatal <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg"><code>TJException</code></a> (unless
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_STOPONWARNING"><code>TJ.FLAG_STOPONWARNING</code></a> is specified.)</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstBuf</code> - buffer that will receive the decompressed/decoded image.
If the source image is a JPEG image, then this buffer should normally be
<code>stride * scaledHeight</code> pixels in size, where
<code>scaledHeight</code> can be determined by calling <code>
scalingFactor.<a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a>(jpegHeight)
</code> with one of the scaling factors returned from <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#getScalingFactors()"><code>TJ.getScalingFactors()</code></a> or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledHeight(int,%20int)"><code>getScaledHeight(int, int)</code></a>. If the
source image is a YUV image, then this buffer should normally be
<code>stride * height</code> pixels in size, where <code>height</code> is
the height of the YUV image. However, the buffer may also be larger than
the dimensions of the JPEG image, in which case the <code>x</code>,
<code>y</code>, and <code>stride</code> parameters can be used to specify
the region into which the source image should be decompressed.</dd><dd><code>x</code> - x offset (in pixels) of the region in the destination image into
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstBuf</code> - buffer that will receive the packed-pixel
decompressed/decoded image. If the source image is a JPEG image, then
this buffer should normally be <code>stride * scaledHeight</code> pixels
in size, where <code>scaledHeight</code> can be determined by calling
<code>scalingFactor.</code><a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a><code>(jpegHeight)</code>
with one of the scaling factors returned from <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#getScalingFactors()"><code>TJ.getScalingFactors()</code></a>
or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledHeight(int,%20int)"><code>getScaledHeight(int, int)</code></a>. If the source image is a YUV
image, then this buffer should normally be <code>stride * height</code>
pixels in size, where <code>height</code> is the height of the YUV image.
However, the buffer may also be larger than the dimensions of the JPEG
image, in which case the <code>x</code>, <code>y</code>, and
<code>stride</code> parameters can be used to specify the region into
which the source image should be decompressed.</dd><dd><code>x</code> - x offset (in pixels) of the region in the destination image into
which the source image should be decompressed/decoded</dd><dd><code>y</code> - y offset (in pixels) of the region in the destination image into
which the source image should be decompressed/decoded</dd><dd><code>desiredWidth</code> - If the source image is a JPEG image, then this
specifies the desired width (in pixels) of the decompressed image (or
@@ -1081,16 +1094,16 @@ public&nbsp;byte[]&nbsp;decompressToYUV(int&nbsp;flags)
than the source image dimensions, then TurboJPEG will use scaling in the
JPEG decompressor to generate the largest possible image that will fit
within the desired dimensions. Setting this to 0 is the same as setting
it to the width of the JPEG image (in other words, the width will not be
it to the width of the JPEG image. (In other words, the width will not be
considered when determining the scaled image size.) This parameter is
ignored if the source image is a YUV image.</dd><dd><code>stride</code> - pixels per line of the destination image. Normally, this
ignored if the source image is a YUV image.</dd><dd><code>stride</code> - pixels per row in the destination image. Normally this
should be set to <code>scaledWidth</code>, but you can use this to, for
instance, decompress the JPEG image into a region of a larger image.
NOTE: if the source image is a JPEG image, then <code>scaledWidth</code>
can be determined by calling <code>
scalingFactor.<a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a>(jpegWidth)
</code> or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledWidth(int,%20int)"><code>getScaledWidth(int, int)</code></a>. If the source image is a
YUV image, then <code>scaledWidth</code> is the width of the YUV image.
can be determined by calling
<code>scalingFactor.</code><a href="../../../org/libjpegturbo/turbojpeg/TJScalingFactor.html#getScaled(int)"><code>getScaled</code></a><code>(jpegWidth)</code>
or by calling <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#getScaledWidth(int,%20int)"><code>getScaledWidth(int, int)</code></a>. If the source image is a YUV
image, then <code>scaledWidth</code> is the width of the YUV image.
Setting this parameter to 0 is the equivalent of setting it to
<code>scaledWidth</code>.</dd><dd><code>desiredHeight</code> - If the source image is a JPEG image, then this
specifies the desired height (in pixels) of the decompressed image (or
@@ -1098,8 +1111,8 @@ public&nbsp;byte[]&nbsp;decompressToYUV(int&nbsp;flags)
than the source image dimensions, then TurboJPEG will use scaling in the
JPEG decompressor to generate the largest possible image that will fit
within the desired dimensions. Setting this to 0 is the same as setting
it to the height of the JPEG image (in other words, the height will not be
considered when determining the scaled image size.) This parameter is
it to the height of the JPEG image. (In other words, the height will not
be considered when determining the scaled image size.) This parameter is
ignored if the source image is a YUV image.</dd><dd><code>pixelFormat</code> - pixel format of the decompressed image (one of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#PF_RGB"><code>TJ.PF_*</code></a>)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
@@ -1116,20 +1129,21 @@ public&nbsp;byte[]&nbsp;decompressToYUV(int&nbsp;flags)
<pre>public&nbsp;void&nbsp;decompress(java.awt.image.BufferedImage&nbsp;dstImage,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and output a decompressed/decoded image to
the given <code>BufferedImage</code> instance.
<div class="block">Decompress the JPEG source image or decode the planar YUV source image
associated with this decompressor instance and output a packed-pixel
decompressed/decoded image to the given <code>BufferedImage</code>
instance.
<p>
NOTE: The output image is fully recoverable if this method throws a
NOTE: The destination image is fully recoverable if this method throws a
non-fatal <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg"><code>TJException</code></a> (unless
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_STOPONWARNING"><code>TJ.FLAG_STOPONWARNING</code></a> is specified.)</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstImage</code> - a <code>BufferedImage</code> instance that will receive
the decompressed/decoded image. If the source image is a JPEG image, then
the width and height of the <code>BufferedImage</code> instance must match
one of the scaled image sizes that TurboJPEG is capable of generating from
the JPEG image. If the source image is a YUV image, then the width and
height of the <code>BufferedImage</code> instance must match the width and
height of the YUV image.</dd><dd><code>flags</code> - the bitwise OR of one or more of
the packed-pixel decompressed/decoded image. If the source image is a
JPEG image, then the width and height of the <code>BufferedImage</code>
instance must match one of the scaled image sizes that the decompressor is
capable of generating from the JPEG image. If the source image is a YUV
image, then the width and height of the <code>BufferedImage</code>
instance must match the width and height of the YUV image.</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
@@ -1148,7 +1162,7 @@ public&nbsp;byte[]&nbsp;decompressToYUV(int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Decompress the JPEG source image or decode the YUV source image associated
with this decompressor instance and return a <code>BufferedImage</code>
instance containing the decompressed/decoded image.</div>
instance containing the packed-pixel decompressed/decoded image.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>desiredWidth</code> - see
<a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html#decompress(byte[],%20int,%20int,%20int,%20int,%20int,%20int,%20int)"><code>decompress(byte[], int, int, int, int, int, int, int)</code></a> for
description</dd><dd><code>desiredHeight</code> - see
@@ -1157,7 +1171,7 @@ public&nbsp;byte[]&nbsp;decompressToYUV(int&nbsp;flags)
instance that will be created (for instance,
<code>BufferedImage.TYPE_INT_RGB</code>)</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>a <code>BufferedImage</code> instance containing the
<dt><span class="strong">Returns:</span></dt><dd>a <code>BufferedImage</code> instance containing the packed-pixel
decompressed/decoded image.</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>

36
java/doc/org/libjpegturbo/turbojpeg/TJTransform.html
View File

@@ -167,7 +167,7 @@ extends java.awt.Rectangle</pre>
<tr class="altColor">
<td class="colFirst"><code>int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#op">op</a></strong></code>
<div class="block">Transform operation (one of <code>OP_*</code>)</div>
<div class="block">Transform operation (one of <a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OP_NONE"><code>OP_*</code></a>)</div>
</td>
</tr>
<tr class="rowColor">
@@ -223,7 +223,7 @@ extends java.awt.Rectangle</pre>
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OPT_COPYNONE">OPT_COPYNONE</a></strong></code>
<div class="block">This option will prevent <a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#transform(byte[][],%20org.libjpegturbo.turbojpeg.TJTransform[],%20int)"><code>TJTransformer.transform()</code></a> from copying any extra markers (including EXIF
and ICC profile data) from the source image to the output image.</div>
and ICC profile data) from the source image to the destination image.</div>
</td>
</tr>
<tr class="altColor">
@@ -235,8 +235,8 @@ extends java.awt.Rectangle</pre>
<tr class="rowColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OPT_GRAY">OPT_GRAY</a></strong></code>
<div class="block">This option will discard the color data in the input image and produce
a grayscale output image.</div>
<div class="block">This option will discard the color data in the source image and produce a
grayscale destination image.</div>
</td>
</tr>
<tr class="altColor">
@@ -256,7 +256,7 @@ extends java.awt.Rectangle</pre>
<tr class="altColor">
<td class="colFirst"><code>static int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OPT_PROGRESSIVE">OPT_PROGRESSIVE</a></strong></code>
<div class="block">This option will enable progressive entropy coding in the output image
<div class="block">This option will enable progressive entropy coding in the JPEG image
generated by this particular transform.</div>
</td>
</tr>
@@ -270,7 +270,8 @@ extends java.awt.Rectangle</pre>
<tr class="altColor">
<td class="colFirst"><code>int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#options">options</a></strong></code>
<div class="block">Transform options (bitwise OR of one or more of <code>OPT_*</code>)</div>
<div class="block">Transform options (bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OPT_PERFECT"><code>OPT_*</code></a>)</div>
</td>
</tr>
</table>
@@ -509,7 +510,7 @@ extends java.awt.Rectangle</pre>
the level of chrominance subsampling used. If the image's width or height
is not evenly divisible by the MCU block size (see <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#getMCUWidth(int)"><code>TJ.getMCUWidth(int)</code></a>
and <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#getMCUHeight(int)"><code>TJ.getMCUHeight(int)</code></a>), then there will be partial MCU blocks on the
right and/or bottom edges. It is not possible to move these partial MCU
right and/or bottom edges. It is not possible to move these partial MCU
blocks to the top or left of the image, so any transform that would
require that is "imperfect." If this option is not specified, then any
partial MCU blocks that cannot be transformed will be left in place, which
@@ -547,8 +548,8 @@ extends java.awt.Rectangle</pre>
<li class="blockList">
<h4>OPT_GRAY</h4>
<pre>public static final&nbsp;int OPT_GRAY</pre>
<div class="block">This option will discard the color data in the input image and produce
a grayscale output image.</div>
<div class="block">This option will discard the color data in the source image and produce a
grayscale destination image.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJTransform.OPT_GRAY">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -573,7 +574,7 @@ extends java.awt.Rectangle</pre>
<li class="blockList">
<h4>OPT_PROGRESSIVE</h4>
<pre>public static final&nbsp;int OPT_PROGRESSIVE</pre>
<div class="block">This option will enable progressive entropy coding in the output image
<div class="block">This option will enable progressive entropy coding in the JPEG image
generated by this particular transform. Progressive entropy coding will
generally improve compression relative to baseline entropy coding (the
default), but it will reduce compression and decompression performance
@@ -589,7 +590,7 @@ extends java.awt.Rectangle</pre>
<h4>OPT_COPYNONE</h4>
<pre>public static final&nbsp;int OPT_COPYNONE</pre>
<div class="block">This option will prevent <a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#transform(byte[][],%20org.libjpegturbo.turbojpeg.TJTransform[],%20int)"><code>TJTransformer.transform()</code></a> from copying any extra markers (including EXIF
and ICC profile data) from the source image to the output image.</div>
and ICC profile data) from the source image to the destination image.</div>
<dl><dt><span class="strong">See Also:</span></dt><dd><a href="../../../constant-values.html#org.libjpegturbo.turbojpeg.TJTransform.OPT_COPYNONE">Constant Field Values</a></dd></dl>
</li>
</ul>
@@ -600,7 +601,7 @@ extends java.awt.Rectangle</pre>
<li class="blockList">
<h4>op</h4>
<pre>public&nbsp;int op</pre>
<div class="block">Transform operation (one of <code>OP_*</code>)</div>
<div class="block">Transform operation (one of <a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OP_NONE"><code>OP_*</code></a>)</div>
</li>
</ul>
<a name="options">
@@ -610,7 +611,8 @@ extends java.awt.Rectangle</pre>
<li class="blockList">
<h4>options</h4>
<pre>public&nbsp;int options</pre>
<div class="block">Transform options (bitwise OR of one or more of <code>OPT_*</code>)</div>
<div class="block">Transform options (bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OPT_PERFECT"><code>OPT_*</code></a>)</div>
</li>
</ul>
<a name="cf">
@@ -661,8 +663,8 @@ extends java.awt.Rectangle</pre>
equivalent of setting it to (width of the source JPEG image -
<code>x</code>).</dd><dd><code>h</code> - the height of the cropping region. Setting this to 0 is the
equivalent of setting it to (height of the source JPEG image -
<code>y</code>).</dd><dd><code>op</code> - one of the transform operations (<code>OP_*</code>)</dd><dd><code>options</code> - the bitwise OR of one or more of the transform options
(<code>OPT_*</code>)</dd><dd><code>cf</code> - an instance of an object that implements the <a href="../../../org/libjpegturbo/turbojpeg/TJCustomFilter.html" title="interface in org.libjpegturbo.turbojpeg"><code>TJCustomFilter</code></a> interface, or null if no custom filter is needed</dd></dl>
<code>y</code>).</dd><dd><code>op</code> - one of the transform operations (<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OP_NONE"><code>OP_*</code></a>)</dd><dd><code>options</code> - the bitwise OR of one or more of the transform options
(<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OPT_PERFECT"><code>OPT_*</code></a>)</dd><dd><code>cf</code> - an instance of an object that implements the <a href="../../../org/libjpegturbo/turbojpeg/TJCustomFilter.html" title="interface in org.libjpegturbo.turbojpeg"><code>TJCustomFilter</code></a> interface, or null if no custom filter is needed</dd></dl>
</li>
</ul>
<a name="TJTransform(java.awt.Rectangle, int, int, org.libjpegturbo.turbojpeg.TJCustomFilter)">
@@ -678,8 +680,8 @@ extends java.awt.Rectangle</pre>
<div class="block">Create a new lossless transform instance with the given parameters.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>r</code> - a <code>Rectangle</code> instance that specifies the cropping
region. See <a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#TJTransform(int,%20int,%20int,%20int,%20int,%20int,%20org.libjpegturbo.turbojpeg.TJCustomFilter)"><code>TJTransform(int, int, int, int, int, int, TJCustomFilter)</code></a> for more
detail.</dd><dd><code>op</code> - one of the transform operations (<code>OP_*</code>)</dd><dd><code>options</code> - the bitwise OR of one or more of the transform options
(<code>OPT_*</code>)</dd><dd><code>cf</code> - an instance of an object that implements the <a href="../../../org/libjpegturbo/turbojpeg/TJCustomFilter.html" title="interface in org.libjpegturbo.turbojpeg"><code>TJCustomFilter</code></a> interface, or null if no custom filter is needed</dd></dl>
detail.</dd><dd><code>op</code> - one of the transform operations (<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OP_NONE"><code>OP_*</code></a>)</dd><dd><code>options</code> - the bitwise OR of one or more of the transform options
(<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html#OPT_PERFECT"><code>OPT_*</code></a>)</dd><dd><code>cf</code> - an instance of an object that implements the <a href="../../../org/libjpegturbo/turbojpeg/TJCustomFilter.html" title="interface in org.libjpegturbo.turbojpeg"><code>TJCustomFilter</code></a> interface, or null if no custom filter is needed</dd></dl>
</li>
</ul>
</li>

81
java/doc/org/libjpegturbo/turbojpeg/TJTransformer.html
View File

@@ -148,14 +148,15 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
<tr class="rowColor">
<td class="colOne"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#TJTransformer(byte[])">TJTransformer</a></strong>(byte[]&nbsp;jpegImage)</code>
<div class="block">Create a TurboJPEG lossless transformer instance and associate the JPEG
image stored in <code>jpegImage</code> with the newly created instance.</div>
source image stored in <code>jpegImage</code> with the newly created
instance.</div>
</td>
</tr>
<tr class="altColor">
<td class="colOne"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#TJTransformer(byte[],%20int)">TJTransformer</a></strong>(byte[]&nbsp;jpegImage,
int&nbsp;imageSize)</code>
<div class="block">Create a TurboJPEG lossless transformer instance and associate the JPEG
image of length <code>imageSize</code> bytes stored in
source image of length <code>imageSize</code> bytes stored in
<code>jpegImage</code> with the newly created instance.</div>
</td>
</tr>
@@ -178,7 +179,7 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
<td class="colFirst"><code>int[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#getTransformedSizes()">getTransformedSizes</a></strong>()</code>
<div class="block">Returns an array containing the sizes of the transformed JPEG images
generated by the most recent transform operation.</div>
(in bytes) generated by the most recent transform operation.</div>
</td>
</tr>
<tr class="rowColor">
@@ -186,18 +187,18 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#transform(byte[][],%20org.libjpegturbo.turbojpeg.TJTransform[],%20int)">transform</a></strong>(byte[][]&nbsp;dstBufs,
<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg">TJTransform</a>[]&nbsp;transforms,
int&nbsp;flags)</code>
<div class="block">Losslessly transform the JPEG image associated with this transformer
instance into one or more JPEG images stored in the given destination
buffers.</div>
<div class="block">Losslessly transform the JPEG source image associated with this
transformer instance into one or more JPEG images stored in the given
destination buffers.</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code><a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg">TJDecompressor</a>[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/TJTransformer.html#transform(org.libjpegturbo.turbojpeg.TJTransform[],%20int)">transform</a></strong>(<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg">TJTransform</a>[]&nbsp;transforms,
int&nbsp;flags)</code>
<div class="block">Losslessly transform the JPEG image associated with this transformer
instance and return an array of <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg"><code>TJDecompressor</code></a> instances, each of
which has a transformed JPEG image associated with it.</div>
<div class="block">Losslessly transform the JPEG source image associated with this
transformer instance and return an array of <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg"><code>TJDecompressor</code></a>
instances, each of which has a transformed JPEG image associated with it.</div>
</td>
</tr>
</table>
@@ -251,9 +252,11 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
<pre>public&nbsp;TJTransformer(byte[]&nbsp;jpegImage)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Create a TurboJPEG lossless transformer instance and associate the JPEG
image stored in <code>jpegImage</code> with the newly created instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - JPEG image buffer (size of the JPEG image is assumed to
be the length of the array.) This buffer is not modified.</dd>
source image stored in <code>jpegImage</code> with the newly created
instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - buffer containing the JPEG source image to transform.
(The size of the JPEG image is assumed to be the length of the array.)
This buffer is not modified.</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -268,9 +271,10 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
int&nbsp;imageSize)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Create a TurboJPEG lossless transformer instance and associate the JPEG
image of length <code>imageSize</code> bytes stored in
source image of length <code>imageSize</code> bytes stored in
<code>jpegImage</code> with the newly created instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - JPEG image buffer. This buffer is not modified.</dd><dd><code>imageSize</code> - size of the JPEG image (in bytes)</dd>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>jpegImage</code> - buffer containing the JPEG source image to transform.
This buffer is not modified.</dd><dd><code>imageSize</code> - size of the JPEG source image (in bytes)</dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
</li>
@@ -293,25 +297,26 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg">TJTransform</a>[]&nbsp;transforms,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Losslessly transform the JPEG image associated with this transformer
instance into one or more JPEG images stored in the given destination
buffers. Lossless transforms work by moving the raw coefficients from one
JPEG image structure to another without altering the values of the
coefficients. While this is typically faster than decompressing the
image, transforming it, and re-compressing it, lossless transforms are not
free. Each lossless transform requires reading and performing Huffman
decoding on all of the coefficients in the source image, regardless of the
size of the destination image. Thus, this method provides a means of
generating multiple transformed images from the same source or of applying
multiple transformations simultaneously, in order to eliminate the need to
read the source coefficients multiple times.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstBufs</code> - an array of image buffers. <code>dstbufs[i]</code> will
receive a JPEG image that has been transformed using the parameters in
<code>transforms[i]</code>. Use <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSize(int,%20int,%20int)"><code>TJ.bufSize(int, int, int)</code></a> to determine the
maximum size for each buffer based on the transformed or cropped width and
height and the level of subsampling used in the source image.</dd><dd><code>transforms</code> - an array of <a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg"><code>TJTransform</code></a> instances, each of
<div class="block">Losslessly transform the JPEG source image associated with this
transformer instance into one or more JPEG images stored in the given
destination buffers. Lossless transforms work by moving the raw
coefficients from one JPEG image structure to another without altering the
values of the coefficients. While this is typically faster than
decompressing the image, transforming it, and re-compressing it, lossless
transforms are not free. Each lossless transform requires reading and
performing Huffman decoding on all of the coefficients in the source
image, regardless of the size of the destination image. Thus, this method
provides a means of generating multiple transformed images from the same
source or of applying multiple transformations simultaneously, in order to
eliminate the need to read the source coefficients multiple times.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>dstBufs</code> - an array of JPEG destination buffers.
<code>dstbufs[i]</code> will receive a JPEG image that has been
transformed using the parameters in <code>transforms[i]</code>. Use
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSize(int,%20int,%20int)"><code>TJ.bufSize(int, int, int)</code></a> to determine the maximum size for each buffer based on
the transformed or cropped width and height and the level of subsampling
used in the source image.</dd><dd><code>transforms</code> - an array of <a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg"><code>TJTransform</code></a> instances, each of
which specifies the transform parameters and/or cropping region for the
corresponding transformed output image</dd><dd><code>flags</code> - the bitwise OR of one or more of
corresponding transformed JPEG image</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Throws:</span></dt>
<dd><code><a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></code></dd></dl>
@@ -326,12 +331,12 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
<pre>public&nbsp;<a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg">TJDecompressor</a>[]&nbsp;transform(<a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg">TJTransform</a>[]&nbsp;transforms,
int&nbsp;flags)
throws <a href="../../../org/libjpegturbo/turbojpeg/TJException.html" title="class in org.libjpegturbo.turbojpeg">TJException</a></pre>
<div class="block">Losslessly transform the JPEG image associated with this transformer
instance and return an array of <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg"><code>TJDecompressor</code></a> instances, each of
which has a transformed JPEG image associated with it.</div>
<div class="block">Losslessly transform the JPEG source image associated with this
transformer instance and return an array of <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg"><code>TJDecompressor</code></a>
instances, each of which has a transformed JPEG image associated with it.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>transforms</code> - an array of <a href="../../../org/libjpegturbo/turbojpeg/TJTransform.html" title="class in org.libjpegturbo.turbojpeg"><code>TJTransform</code></a> instances, each of
which specifies the transform parameters and/or cropping region for the
corresponding transformed output image</dd><dd><code>flags</code> - the bitwise OR of one or more of
corresponding transformed JPEG image</dd><dd><code>flags</code> - the bitwise OR of one or more of
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#FLAG_BOTTOMUP"><code>TJ.FLAG_*</code></a></dd>
<dt><span class="strong">Returns:</span></dt><dd>an array of <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title="class in org.libjpegturbo.turbojpeg"><code>TJDecompressor</code></a> instances, each of
which has a transformed JPEG image associated with it.</dd>
@@ -347,9 +352,9 @@ extends <a href="../../../org/libjpegturbo/turbojpeg/TJDecompressor.html" title=
<h4>getTransformedSizes</h4>
<pre>public&nbsp;int[]&nbsp;getTransformedSizes()</pre>
<div class="block">Returns an array containing the sizes of the transformed JPEG images
generated by the most recent transform operation.</div>
(in bytes) generated by the most recent transform operation.</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>an array containing the sizes of the transformed JPEG images
generated by the most recent transform operation.</dd></dl>
(in bytes) generated by the most recent transform operation.</dd></dl>
</li>
</ul>
</li>

166
java/doc/org/libjpegturbo/turbojpeg/YUVImage.html
View File

@@ -98,7 +98,7 @@
<br>
<pre>public class <span class="strong">YUVImage</span>
extends java.lang.Object</pre>
<div class="block">This class encapsulates a YUV planar image and the metadata
<div class="block">This class encapsulates a planar YUV image and the metadata
associated with it. The TurboJPEG API allows both the JPEG compression and
decompression pipelines to be split into stages: YUV encode, compress from
YUV, decompress to YUV, and YUV decode. A <code>YUVImage</code> instance
@@ -106,30 +106,32 @@ extends java.lang.Object</pre>
operations and as the source image for compress-from-YUV and YUV decode
operations.
<p>
Technically, the JPEG format uses the YCbCr colorspace (which technically is
not a "colorspace" but rather a "color transform"), but per the convention
of the digital video community, the TurboJPEG API uses "YUV" to refer to an
image format consisting of Y, Cb, and Cr image planes.
Technically, the JPEG format uses the YCbCr colorspace (which is technically
not a colorspace but a color transform), but per the convention of the
digital video community, the TurboJPEG API uses "YUV" to refer to an image
format consisting of Y, Cb, and Cr image planes.
<p>
Each plane is simply a 2D array of bytes, each byte representing the value
of one of the components (Y, Cb, or Cr) at a particular location in the
image. The width and height of each plane are determined by the image
width, height, and level of chrominance subsampling. The luminance plane
width is the image width padded to the nearest multiple of the horizontal
subsampling factor (2 in the case of 4:2:0 and 4:2:2, 4 in the case of
4:1:1, 1 in the case of 4:4:4 or grayscale.) Similarly, the luminance plane
height is the image height padded to the nearest multiple of the vertical
subsampling factor (2 in the case of 4:2:0 or 4:4:0, 1 in the case of 4:4:4
or grayscale.) The chrominance plane width is equal to the luminance plane
width divided by the horizontal subsampling factor, and the chrominance
plane height is equal to the luminance plane height divided by the vertical
subsampling factor.
subsampling factor (1 in the case of 4:4:4, grayscale, or 4:4:0; 2 in the
case of 4:2:2 or 4:2:0; 4 in the case of 4:1:1.) Similarly, the luminance
plane height is the image height padded to the nearest multiple of the
vertical subsampling factor (1 in the case of 4:4:4, 4:2:2, grayscale, or
4:1:1; 2 in the case of 4:2:0 or 4:4:0.) This is irrespective of any
additional padding that may be specified as an argument to the various
YUVImage methods. The chrominance plane width is equal to the luminance
plane width divided by the horizontal subsampling factor, and the
chrominance plane height is equal to the luminance plane height divided by
the vertical subsampling factor.
<p>
For example, if the source image is 35 x 35 pixels and 4:2:2 subsampling is
used, then the luminance plane would be 36 x 35 bytes, and each of the
chrominance planes would be 18 x 35 bytes. If you specify a line padding of
4 bytes on top of this, then the luminance plane would be 36 x 35 bytes, and
each of the chrominance planes would be 20 x 35 bytes.</div>
chrominance planes would be 18 x 35 bytes. If you specify a row alignment
of 4 bytes on top of this, then the luminance plane would be 36 x 35 bytes,
and each of the chrominance planes would be 20 x 35 bytes.</div>
</li>
</ul>
</div>
@@ -154,15 +156,15 @@ extends java.lang.Object</pre>
</tr>
<tr class="rowColor">
<td class="colFirst"><code>protected int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#yuvHeight">yuvHeight</a></strong></code>&nbsp;</td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#yuvAlign">yuvAlign</a></strong></code>&nbsp;</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code>protected int[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#yuvOffsets">yuvOffsets</a></strong></code>&nbsp;</td>
<td class="colFirst"><code>protected int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#yuvHeight">yuvHeight</a></strong></code>&nbsp;</td>
</tr>
<tr class="rowColor">
<td class="colFirst"><code>protected int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#yuvPad">yuvPad</a></strong></code>&nbsp;</td>
<td class="colFirst"><code>protected int[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#yuvOffsets">yuvOffsets</a></strong></code>&nbsp;</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code>protected byte[][]</code></td>
@@ -208,10 +210,10 @@ extends java.lang.Object</pre>
<tr class="rowColor">
<td class="colOne"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#YUVImage(byte[],%20int,%20int,%20int,%20int)">YUVImage</a></strong>(byte[]&nbsp;yuvImage,
int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</code>
<div class="block">Create a new <code>YUVImage</code> instance from an existing unified image
<div class="block">Create a new <code>YUVImage</code> instance from an existing unified
buffer.</div>
</td>
</tr>
@@ -226,11 +228,11 @@ extends java.lang.Object</pre>
</tr>
<tr class="rowColor">
<td class="colOne"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#YUVImage(int,%20int,%20int,%20int)">YUVImage</a></strong>(int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</code>
<div class="block">Create a new <code>YUVImage</code> instance backed by a unified image
buffer, and allocate memory for the image buffer.</div>
<div class="block">Create a new <code>YUVImage</code> instance backed by a unified buffer,
and allocate memory for the buffer.</div>
</td>
</tr>
</table>
@@ -251,8 +253,8 @@ extends java.lang.Object</pre>
<tr class="altColor">
<td class="colFirst"><code>byte[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#getBuf()">getBuf</a></strong>()</code>
<div class="block">Returns the YUV image buffer (if this image is stored in a unified
buffer rather than separate image planes.)</div>
<div class="block">Returns the YUV buffer (if this image is stored in a unified buffer rather
than separate image planes.)</div>
</td>
</tr>
<tr class="rowColor">
@@ -271,7 +273,7 @@ extends java.lang.Object</pre>
<tr class="rowColor">
<td class="colFirst"><code>int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#getPad()">getPad</a></strong>()</code>
<div class="block">Returns the line padding used in the YUV image buffer (if this image is
<div class="block">Returns the row alignment (in bytes) of the YUV buffer (if this image is
stored in a unified buffer rather than separate image planes.)</div>
</td>
</tr>
@@ -284,14 +286,14 @@ extends java.lang.Object</pre>
<tr class="rowColor">
<td class="colFirst"><code>int</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#getSize()">getSize</a></strong>()</code>
<div class="block">Returns the size (in bytes) of the YUV image buffer (if this image is
stored in a unified buffer rather than separate image planes.)</div>
<div class="block">Returns the size (in bytes) of the YUV buffer (if this image is stored in
a unified buffer rather than separate image planes.)</div>
</td>
</tr>
<tr class="altColor">
<td class="colFirst"><code>int[]</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#getStrides()">getStrides</a></strong>()</code>
<div class="block">Returns the number of bytes per line of each plane in the YUV image.</div>
<div class="block">Returns the number of bytes per row of each plane in the YUV image.</div>
</td>
</tr>
<tr class="rowColor">
@@ -321,10 +323,10 @@ extends java.lang.Object</pre>
<td class="colFirst"><code>void</code></td>
<td class="colLast"><code><strong><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html#setBuf(byte[],%20int,%20int,%20int,%20int)">setBuf</a></strong>(byte[]&nbsp;yuvImage,
int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</code>
<div class="block">Assign a unified image buffer to this <code>YUVImage</code> instance.</div>
<div class="block">Assign a unified buffer to this <code>YUVImage</code> instance.</div>
</td>
</tr>
</table>
@@ -385,13 +387,13 @@ extends java.lang.Object</pre>
<pre>protected&nbsp;int[] yuvStrides</pre>
</li>
</ul>
<a name="yuvPad">
<a name="yuvAlign">
<!-- -->
</a>
<ul class="blockList">
<li class="blockList">
<h4>yuvPad</h4>
<pre>protected&nbsp;int yuvPad</pre>
<h4>yuvAlign</h4>
<pre>protected&nbsp;int yuvAlign</pre>
</li>
</ul>
<a name="yuvWidth">
@@ -442,7 +444,7 @@ extends java.lang.Object</pre>
<div class="block">Create a new <code>YUVImage</code> instance backed by separate image
planes, and allocate memory for the image planes.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>strides</code> - an array of integers, each specifying the number of bytes
per line in the corresponding plane of the YUV image. Setting the stride
per row in the corresponding plane of the YUV image. Setting the stride
for any plane to 0 is the same as setting it to the plane width (see
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>above</code></a>.) If <code>strides</code> is null, then the
strides for all planes will be set to their respective plane widths. When
@@ -458,13 +460,15 @@ extends java.lang.Object</pre>
<li class="blockList">
<h4>YUVImage</h4>
<pre>public&nbsp;YUVImage(int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</pre>
<div class="block">Create a new <code>YUVImage</code> instance backed by a unified image
buffer, and allocate memory for the image buffer.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>pad</code> - Each line of each plane in the YUV image buffer will be padded
to this number of bytes (must be a power of 2.)</dd><dd><code>height</code> - height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling to be used in the YUV
<div class="block">Create a new <code>YUVImage</code> instance backed by a unified buffer,
and allocate memory for the buffer.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>align</code> - row alignment (in bytes) of the YUV image (must be a power of
2.) Setting this parameter to n specifies that each row in each plane of
the YUV image will be padded to the nearest multiple of n bytes
(1 = unpadded.)</dd><dd><code>height</code> - height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling to be used in the YUV
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd></dl>
</li>
</ul>
@@ -485,18 +489,18 @@ extends java.lang.Object</pre>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>planes</code> - an array of buffers representing the Y, U (Cb), and V (Cr)
image planes (or just the Y plane, if the image is grayscale.) These
planes can be contiguous or non-contiguous in memory. Plane
<code>i</code> should be at least <code>offsets[i] +
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#planeSizeYUV(int,%20int,%20int,%20int,%20int)"><code>TJ.planeSizeYUV</code></a>(i, width, strides[i], height, subsamp)</code>
<code>i</code> should be at least <code>offsets[i] + </code>
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#planeSizeYUV(int,%20int,%20int,%20int,%20int)"><code>TJ.planeSizeYUV</code></a><code>(i, width, strides[i], height, subsamp)</code>
bytes in size.</dd><dd><code>offsets</code> - If this <code>YUVImage</code> instance represents a
subregion of a larger image, then <code>offsets[i]</code> specifies the
offset (in bytes) of the subregion within plane <code>i</code> of the
larger image. Setting this to null is the same as setting the offsets for
all planes to 0.</dd><dd><code>width</code> - width (in pixels) of the new YUV image (or subregion)</dd><dd><code>strides</code> - an array of integers, each specifying the number of bytes
per line in the corresponding plane of the YUV image. Setting the stride
per row in the corresponding plane of the YUV image. Setting the stride
for any plane to 0 is the same as setting it to the plane width (see
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>above</code></a>.) If <code>strides</code> is null, then the
strides for all planes will be set to their respective plane widths. You
can adjust the strides in order to add an arbitrary amount of line padding
can adjust the strides in order to add an arbitrary amount of row padding
to each plane or to specify that this <code>YUVImage</code> instance is a
subregion of a larger image (in which case, <code>strides[i]</code> should
be set to the plane width of plane <code>i</code> in the larger image.)</dd><dd><code>height</code> - height (in pixels) of the new YUV image (or subregion)</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
@@ -511,18 +515,19 @@ extends java.lang.Object</pre>
<h4>YUVImage</h4>
<pre>public&nbsp;YUVImage(byte[]&nbsp;yuvImage,
int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</pre>
<div class="block">Create a new <code>YUVImage</code> instance from an existing unified image
<div class="block">Create a new <code>YUVImage</code> instance from an existing unified
buffer.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>yuvImage</code> - image buffer that contains or will contain YUV planar
image data. Use <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSizeYUV(int,%20int,%20int,%20int)"><code>TJ.bufSizeYUV(int, int, int, int)</code></a> to determine the minimum size for
this buffer. The Y, U (Cb), and V (Cr) image planes are stored
sequentially in the buffer (see <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>above</code></a> for a description
of the image format.)</dd><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>pad</code> - the line padding used in the YUV image buffer. For
instance, if each line in each plane of the buffer is padded to the
nearest multiple of 4 bytes, then <code>pad</code> should be set to 4.</dd><dd><code>height</code> - height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>yuvImage</code> - buffer that contains or will receive a unified planar YUV
image. Use <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSizeYUV(int,%20int,%20int,%20int)"><code>TJ.bufSizeYUV(int, int, int, int)</code></a> to determine the minimum size for this
buffer. The Y, U (Cb), and V (Cr) image planes are stored sequentially in
the buffer. (See <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>above</code></a> for a description of the image
format.)</dd><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>align</code> - row alignment (in bytes) of the YUV image (must be a power of
2.) Setting this parameter to n specifies that each row in each plane of
the YUV image will be padded to the nearest multiple of n bytes
(1 = unpadded.)</dd><dd><code>height</code> - height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd></dl>
</li>
</ul>
@@ -550,19 +555,19 @@ extends java.lang.Object</pre>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>planes</code> - an array of buffers representing the Y, U (Cb), and V (Cr)
image planes (or just the Y plane, if the image is grayscale.) These
planes can be contiguous or non-contiguous in memory. Plane
<code>i</code> should be at least <code>offsets[i] +
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#planeSizeYUV(int,%20int,%20int,%20int,%20int)"><code>TJ.planeSizeYUV</code></a>(i, width, strides[i], height, subsamp)</code>
<code>i</code> should be at least <code>offsets[i] + </code>
<a href="../../../org/libjpegturbo/turbojpeg/TJ.html#planeSizeYUV(int,%20int,%20int,%20int,%20int)"><code>TJ.planeSizeYUV</code></a><code>(i, width, strides[i], height, subsamp)</code>
bytes in size.</dd><dd><code>offsets</code> - If this <code>YUVImage</code> instance represents a
subregion of a larger image, then <code>offsets[i]</code> specifies the
offset (in bytes) of the subregion within plane <code>i</code> of the
larger image. Setting this to null is the same as setting the offsets for
all planes to 0.</dd><dd><code>width</code> - width (in pixels) of the YUV image (or subregion)</dd><dd><code>strides</code> - an array of integers, each specifying the number of bytes
per line in the corresponding plane of the YUV image. Setting the stride
per row in the corresponding plane of the YUV image. Setting the stride
for any plane to 0 is the same as setting it to the plane width (see
<a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>above</code></a>.) If <code>strides</code> is null, then the
strides for all planes will be set to their respective plane widths. You
can adjust the strides in order to add an arbitrary amount of line padding
to each plane or to specify that this <code>YUVImage</code> image is a
can adjust the strides in order to add an arbitrary amount of row padding
to each plane or to specify that this <code>YUVImage</code> instance is a
subregion of a larger image (in which case, <code>strides[i]</code> should
be set to the plane width of plane <code>i</code> in the larger image.)</dd><dd><code>height</code> - height (in pixels) of the YUV image (or subregion)</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd></dl>
@@ -576,17 +581,18 @@ extends java.lang.Object</pre>
<h4>setBuf</h4>
<pre>public&nbsp;void&nbsp;setBuf(byte[]&nbsp;yuvImage,
int&nbsp;width,
int&nbsp;pad,
int&nbsp;align,
int&nbsp;height,
int&nbsp;subsamp)</pre>
<div class="block">Assign a unified image buffer to this <code>YUVImage</code> instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>yuvImage</code> - image buffer that contains or will contain YUV planar
image data. Use <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSizeYUV(int,%20int,%20int,%20int)"><code>TJ.bufSizeYUV(int, int, int, int)</code></a> to determine the minimum size for
this buffer. The Y, U (Cb), and V (Cr) image planes are stored
sequentially in the buffer (see <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>above</code></a> for a description
of the image format.)</dd><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>pad</code> - the line padding used in the YUV image buffer. For
instance, if each line in each plane of the buffer is padded to the
nearest multiple of 4 bytes, then <code>pad</code> should be set to 4.</dd><dd><code>height</code> - height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
<div class="block">Assign a unified buffer to this <code>YUVImage</code> instance.</div>
<dl><dt><span class="strong">Parameters:</span></dt><dd><code>yuvImage</code> - buffer that contains or will receive a unified planar YUV
image. Use <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#bufSizeYUV(int,%20int,%20int,%20int)"><code>TJ.bufSizeYUV(int, int, int, int)</code></a> to determine the minimum size for this
buffer. The Y, U (Cb), and V (Cr) image planes are stored sequentially in
the buffer. (See <a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg"><code>above</code></a> for a description of the image
format.)</dd><dd><code>width</code> - width (in pixels) of the YUV image</dd><dd><code>align</code> - row alignment (in bytes) of the YUV image (must be a power of
2.) Setting this parameter to n specifies that each row in each plane of
the YUV image will be padded to the nearest multiple of n bytes
(1 = unpadded.)</dd><dd><code>height</code> - height (in pixels) of the YUV image</dd><dd><code>subsamp</code> - the level of chrominance subsampling used in the YUV
image (one of <a href="../../../org/libjpegturbo/turbojpeg/TJ.html#SAMP_444"><code>TJ.SAMP_*</code></a>)</dd></dl>
</li>
</ul>
@@ -619,9 +625,9 @@ extends java.lang.Object</pre>
<li class="blockList">
<h4>getPad</h4>
<pre>public&nbsp;int&nbsp;getPad()</pre>
<div class="block">Returns the line padding used in the YUV image buffer (if this image is
<div class="block">Returns the row alignment (in bytes) of the YUV buffer (if this image is
stored in a unified buffer rather than separate image planes.)</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the line padding used in the YUV image buffer</dd></dl>
<dl><dt><span class="strong">Returns:</span></dt><dd>the row alignment of the YUV buffer</dd></dl>
</li>
</ul>
<a name="getStrides()">
@@ -631,8 +637,8 @@ extends java.lang.Object</pre>
<li class="blockList">
<h4>getStrides</h4>
<pre>public&nbsp;int[]&nbsp;getStrides()</pre>
<div class="block">Returns the number of bytes per line of each plane in the YUV image.</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the number of bytes per line of each plane in the YUV image</dd></dl>
<div class="block">Returns the number of bytes per row of each plane in the YUV image.</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the number of bytes per row of each plane in the YUV image</dd></dl>
</li>
</ul>
<a name="getOffsets()">
@@ -679,9 +685,9 @@ extends java.lang.Object</pre>
<li class="blockList">
<h4>getBuf</h4>
<pre>public&nbsp;byte[]&nbsp;getBuf()</pre>
<div class="block">Returns the YUV image buffer (if this image is stored in a unified
buffer rather than separate image planes.)</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the YUV image buffer</dd></dl>
<div class="block">Returns the YUV buffer (if this image is stored in a unified buffer rather
than separate image planes.)</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the YUV buffer</dd></dl>
</li>
</ul>
<a name="getSize()">
@@ -691,9 +697,9 @@ extends java.lang.Object</pre>
<li class="blockList">
<h4>getSize</h4>
<pre>public&nbsp;int&nbsp;getSize()</pre>
<div class="block">Returns the size (in bytes) of the YUV image buffer (if this image is
stored in a unified buffer rather than separate image planes.)</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the size (in bytes) of the YUV image buffer</dd></dl>
<div class="block">Returns the size (in bytes) of the YUV buffer (if this image is stored in
a unified buffer rather than separate image planes.)</div>
<dl><dt><span class="strong">Returns:</span></dt><dd>the size (in bytes) of the YUV buffer</dd></dl>
</li>
</ul>
</li>

2
java/doc/org/libjpegturbo/turbojpeg/package-summary.html
View File

@@ -131,7 +131,7 @@
<tr class="altColor">
<td class="colFirst"><a href="../../../org/libjpegturbo/turbojpeg/YUVImage.html" title="class in org.libjpegturbo.turbojpeg">YUVImage</a></td>
<td class="colLast">
<div class="block">This class encapsulates a YUV planar image and the metadata
<div class="block">This class encapsulates a planar YUV image and the metadata
associated with it.</div>
</td>
</tr>