forked from external-repos/esp32cam-rtsp
d99d1c510f
* Added seeed_xiao_esp32s3 * Fixed typo * Updating build system * Fixed typos * Renamed envirnment name to seeed_xiao_esp32s3 * Update README.md * Updated platformio definitions * Added cache * Updated README.md * - Default value for initResult if initialzation fails * constexpr camera_config_t m5stack_camera_settings * Added M5Stack UnitCamS3 * Work in progress * WIP * Work in progress * Removed OTA * Added unitcams3 * UnitcamS3 * Corrected HTML for ipv4 fixed Sewrial issue esp32s2 * USER_LED_ON_LEVEL=LOW * Added documentation pins for Mems/grove/led * Typo * Removed non required depencency * Removed non required depencency * Readded * Added sccb_i2c_port Retry 3 times camera init * Added Freenove wroom-1 n8r8 board (#112) Co-authored-by: Nick Eales <nick.eales@outlook.com> * Fixing missing comma in xiao board json (#114) * Updated Markdown --------- Co-authored-by: absentwallaby <64674944+absentwallaby@users.noreply.github.com> Co-authored-by: Nick Eales <nick.eales@outlook.com> Co-authored-by: Nick Volgas <n.volgas@gmail.com>
72 lines
2.0 KiB
JSON
72 lines
2.0 KiB
JSON
{
|
|
"build": {
|
|
"arduino": {
|
|
"ldscript": "esp32s3_out.ld",
|
|
"partitions": "default_8MB.csv",
|
|
"memory_type": "opi_opi"
|
|
},
|
|
"core": "esp32",
|
|
"extra_flags": [
|
|
"'-D ESP32CAM_ESP32S3_CAM_LCD'",
|
|
"'-D BOARD_HAS_PSRAM'",
|
|
"'-D ARDUINO_USB_MODE=1'",
|
|
"'-D ARDUINO_USB_CDC_ON_BOOT=1'",
|
|
"'-D ARDUINO_RUNNING_CORE=1'",
|
|
"'-D ARDUINO_EVENT_RUNNING_CORE=1'",
|
|
"'-D CAMERA_CONFIG_PIN_PWDN=GPIO_NUM_NC'",
|
|
"'-D CAMERA_CONFIG_PIN_RESET=GPIO_NUM_NC'",
|
|
"'-D CAMERA_CONFIG_PIN_XCLK=40'",
|
|
"'-D CAMERA_CONFIG_PIN_SCCB_SDA=17'",
|
|
"'-D CAMERA_CONFIG_PIN_SCCB_SCL=18'",
|
|
"'-D CAMERA_CONFIG_PIN_Y9=39'",
|
|
"'-D CAMERA_CONFIG_PIN_Y8=41'",
|
|
"'-D CAMERA_CONFIG_PIN_Y7=42'",
|
|
"'-D CAMERA_CONFIG_PIN_Y6=12'",
|
|
"'-D CAMERA_CONFIG_PIN_Y5=3'",
|
|
"'-D CAMERA_CONFIG_PIN_Y4=14'",
|
|
"'-D CAMERA_CONFIG_PIN_Y3=47'",
|
|
"'-D CAMERA_CONFIG_PIN_Y2=13'",
|
|
"'-D CAMERA_CONFIG_PIN_VSYNC=21'",
|
|
"'-D CAMERA_CONFIG_PIN_HREF=38'",
|
|
"'-D CAMERA_CONFIG_PIN_PCLK=11'",
|
|
"'-D CAMERA_CONFIG_CLK_FREQ_HZ=20000000'",
|
|
"'-D CAMERA_CONFIG_LEDC_TIMER=LEDC_TIMER_0'",
|
|
"'-D CAMERA_CONFIG_LEDC_CHANNEL=LEDC_CHANNEL_0'",
|
|
"'-D CAMERA_CONFIG_FB_COUNT=2'",
|
|
"'-D CAMERA_CONFIG_FB_LOCATION=CAMERA_FB_IN_PSRAM'",
|
|
"'-D SCCB_I2C_PORT=I2C_NUM_0'"
|
|
],
|
|
"f_cpu": "240000000L",
|
|
"f_flash": "80000000L",
|
|
"flash_mode": "dout",
|
|
"hwids": [
|
|
[
|
|
"0X303A",
|
|
"0x1001"
|
|
]
|
|
],
|
|
"mcu": "esp32s3",
|
|
"variant": "esp32s3camlcd"
|
|
},
|
|
"connectivity": [
|
|
"bluetooth",
|
|
"wifi"
|
|
],
|
|
"debug": {
|
|
"openocd_target": "esp32s3.cfg"
|
|
},
|
|
"frameworks": [
|
|
"arduino",
|
|
"espidf"
|
|
],
|
|
"name": "ESP32S3-CAM LCD",
|
|
"upload": {
|
|
"flash_size": "8MB",
|
|
"maximum_ram_size": 327680,
|
|
"maximum_size": 8388608,
|
|
"require_upload_port": true,
|
|
"speed": 460800
|
|
},
|
|
"url": "https://www.espressif.com/en/news/Maple_Eye_ESP32-S3",
|
|
"vendor": "Espressif"
|
|
} |