{
  "build": {
    "arduino": {
      "ldscript": "esp32s3_out.ld",
      "partitions": "default_8MB.csv",
      "memory_type": "qio_opi"
    },
    "core": "esp32",
    "extra_flags": [
      "'-D ESP32CAM_ESPRESSIF_ESP32S3_EYE'",
      "'-D BOARD_HAS_PSRAM'",
      "'-D ARDUINO_USB_MODE=1'",
      "'-D ARDUINO_USB_CDC_ON_BOOT=1'",
      "'-D ARDUINO_RUNNING_CORE=1'",
      "'-D ARDUINO_EVENT_RUNNING_CORE=1'",
      "'-D CAMERA_CONFIG_PIN_PWDN=GPIO_NUM_NC'",
      "'-D CAMERA_CONFIG_PIN_RESET=GPIO_NUM_NC'",
      "'-D CAMERA_CONFIG_PIN_XCLK=15'",
      "'-D CAMERA_CONFIG_PIN_SCCB_SDA=4'",
      "'-D CAMERA_CONFIG_PIN_SCCB_SCL=5'",
      "'-D CAMERA_CONFIG_PIN_Y9=16'",
      "'-D CAMERA_CONFIG_PIN_Y8=17'",
      "'-D CAMERA_CONFIG_PIN_Y7=18'",
      "'-D CAMERA_CONFIG_PIN_Y6=12'",
      "'-D CAMERA_CONFIG_PIN_Y5=10'",
      "'-D CAMERA_CONFIG_PIN_Y4=8'",
      "'-D CAMERA_CONFIG_PIN_Y3=9'",
      "'-D CAMERA_CONFIG_PIN_Y2=11'",
      "'-D CAMERA_CONFIG_PIN_VSYNC=6'",
      "'-D CAMERA_CONFIG_PIN_HREF=7'",
      "'-D CAMERA_CONFIG_PIN_PCLK=13'",
      "'-D CAMERA_CONFIG_CLK_FREQ_HZ=20000000'",
      "'-D CAMERA_CONFIG_LEDC_TIMER=LEDC_TIMER_0'",
      "'-D CAMERA_CONFIG_LEDC_CHANNEL=LEDC_CHANNEL_0'",
      "'-D CAMERA_CONFIG_FB_COUNT=2'",
      "'-D CAMERA_CONFIG_FB_LOCATION=CAMERA_FB_IN_PSRAM'",
      "'-D SCCB_I2C_PORT=I2C_NUM_0'"
    ],
    "f_cpu": "240000000L",
    "f_flash": "80000000L",
    "flash_mode": "qio",
    "hwids": [
      [
        "0x2886",
        "0x0056"
      ],
      [
        "0x2886",
        "0x8056"
      ]
    ],
    "mcu": "esp32s3",
    "variant": "esp32s3"
  },
  "connectivity": [
    "bluetooth",
    "wifi"
  ],
  "debug": {
    "openocd_target": "esp32s3.cfg"
  },
  "frameworks": [
    "arduino",
    "espidf"
  ],
  "name": "ESP32S3_EYE",
  "upload": {
    "flash_size": "8MB",
    "maximum_ram_size": 327680,
    "maximum_size": 8388608,
    "require_upload_port": true,
    "speed": 460800
  },
  "url": "https://www.espressif.com/en/products/devkits/esp-eye/overview",
  "vendor": "Espressif"
}