{{AppTitle}} v{{AppVersion}}

Peripheral

Board type:

LED intensity:

{{LedIntensity}} [0-100]

Network

Host name:

Mac address:

Wifi mode:

Access point:

Signal strength:

{{SignalStrength}} dbm

IPv4 address:

IPv6 address:

Not connected to an access point. Consider configuring the access point.

Connected to the access point

Camera

Frame rate:

{{FrameDuration}} ms ({{FrameFrequency}} f/s)

Frame size:

Frame buffer location:

Frame buffers:

JPEG quality:

{{JpegQuality}} [1-100]

Brightness:

{{Brightness}} [-2,2]

Contrast:

{{Contrast}} [-2,2]

Saturation:

{{Saturation}} [-2,2]

Special effect:

White balance:

AWB gain:

WB mode:

Exposure control:

Auto exposure control (dsp):

Auto Exposure level:

Manual exposure value:

Gain control:

AGC gain:

Gain ceiling:

Black pixel correct:

White pixel correct:

Gamma correct:

Lens correction:

Horizontal mirror:

Vertical flip:

Downsize enable:

Color bar:

Camera was initialized successfully!

Failed to initialize the camera!

Result: {{CameraInitResultText}}

Please check hardware or correct the camera settings and restart.

Special URLs / API

The camera RTSP stream can be found at: rtsp://{{IpV4}}:{{RtspPort}}/mjpeg/1

A snapshot of the camera can be found at: http://{{IpV4}}/snapshot

The intensity of the flash led (0-255) can be controlled using: http://{{IpV4}}/flash?v=value. Authentication is required and if no value is present, the configuration value is used.

Restarting the camera can be done using: http://{{IpV4}}/restart. Authentication is required.

{{ThingName}}

ESP32

Diagnostics

Peripheral

Network

Camera

Special URLs / API